#1 Le 15/01/2015, à 10:33
- lozolol63
[resolue]Comment creer partition /home et /swap
Bonjour;
J'ai chercher un peu sur ce sujet , mais j'ai pas trouver le meme cas que moi (ou a peu pres pareil).
je veux installer Linux(Ubuntu) sur mon Pc (Acer aspire E1-531) qui marche actuellement avec windows 8.1 ;
J'ai télécharger et graver le CD pour l'installation;
Pour pouvoir faire une partition /home afin de pouvoir accéder a tout mes fichiers personnels , comment je dois faire??? et la partie swap je la met ou???
et conserver windows bien entendu .
Alors comment crée les partition ? faut-il dabor que j'en fasse une pour mes fichiers avant de commencer l'instal?
Quelle partition choisir pour faire de la place a ubuntu?
Le tableaux lors de l'instal donne ceci:
------------------------------Taille-------------- utilisé--------- noms des volumes
espace libre----------------1Mo
/dev/sda1----ntfs---------419Mo--------------272Mo------>recovery
/dev/sda2----efi----------314Mo---------------52Mo
/dev/sda3-----------------134Mo------------inconnu
/dev/sda4----ntfs------478255Mo-----------148601Mo------>acer C:
/dev/sda5----ntfs---------471Mo--------------356Mo------>systeme volume
/dev/sda6----ntfs---------367Mo---------------27Mo------>systeme volume
/dev/sda7----ntfs-------20144Mo------------15711Mo------>push button reset
espace libre--------0Mo (7.7Ko)
disque dur : dev/sda/ ATA ST500LT012-9WS14
:500.1Go
Merci d'avances pour vos réponses
Dernière modification par lozolol63 (Le 15/01/2015, à 22:13)
Hors ligne
#2 Le 15/01/2015, à 10:46
- malbo
Re : [resolue]Comment creer partition /home et /swap
Pour pouvoir faire une partition /home afin de pouvoir accéder a tout mes fichiers personnels , comment je dois faire???
Créer une telle partition /home est facultatif*. Que tu crées une partition /home ou que tu n'en crées pas, il y aura toujours un dossier /home dans lequel seront tes fichiers personnels. La différence c'est que si tu crées une partition /home, tes fichiers personnels seront dans cette partition alors que si tu ne crées pas de partition /home, tes fichiers personnels se trouveront dans ta partition racine, la partition dans lequel ton système Ubuntu sera installé.
Étudie un peu ce que je t'indique et confirme-moi (ou non) que tu souhaites avoir une partition /home.
* la partition /home fait partie des Partitions optionnelles (elle est appelée "Partition de données personnelles" dans la doc)
Dernière modification par malbo (Le 15/01/2015, à 10:52)
Hors ligne
#3 Le 15/01/2015, à 10:54
- lozolol63
Re : [resolue]Comment creer partition /home et /swap
Merci .
ça repond en partie a ma question .
Alors du coup comment faire creer de l'espace pour ubuntu?
Hors ligne
#4 Le 15/01/2015, à 10:55
- Ayral
Re : [resolue]Comment creer partition /home et /swap
Bonjour et bienvenue sur le forum.
- Ton ordinateur est bien compatible avec Ubuntu, en tous cas il est répertorié comme tel par la documentation.
- Il faut savoir que depuis l'introduction d'un nouveau système de démarrage des ordinateurs (le boot - UEFI) l'installation d'un système Linux en double boot est devenue plus délicate, il est plus que recommandé de sauvegarder ses données sous Windows avant toute tentative d'installation d'Ubuntu.
- Il n'est pas du tout indispensable de préparer à l'avance des partitions pour Ubuntu, que ce soit le système ou le /home. L'assistant d'installation fait ça tout seul.
- Il est indispensable de lire attentivement cette page de la documentation et notamment ce paragraphe ainsi que les pages qui y sont liées.
Edit: malbo est là, parfait.
Dernière modification par Ayral (Le 15/01/2015, à 10:56)
Pour mettre les retours de commande entre deux balises code, les explications sont là : https://forum.ubuntu-fr.org/viewtopic.php?id=1614731
Blog d'un retraité
Site de graphisme du fiston Loïc
Ubuntu 22.04 LTS sur un Thinkpad W540
Hors ligne
#5 Le 15/01/2015, à 10:59
- lozolol63
Re : [resolue]Comment creer partition /home et /swap
Merci . je regarde ça
Hors ligne
#6 Le 15/01/2015, à 11:12
- malbo
Re : [resolue]Comment creer partition /home et /swap
ça repond en partie a ma question .
Tant mieux mais toi tu n'as pas répondu à la mienne de question : "Étudie un peu ce que je t'indique et confirme-moi (ou non) que tu souhaites avoir une partition /home"
Dernière modification par malbo (Le 15/01/2015, à 11:13)
Hors ligne
#7 Le 15/01/2015, à 11:24
- lozolol63
Re : [resolue]Comment creer partition /home et /swap
oui bon j'était en train de lire la doc,
Alors si j'ai bien compris c'est pas obligatoire de creer cette partition. Dans ce cas , non je ne veu pas en creer
Hors ligne
#8 Le 15/01/2015, à 11:53
- lozolol63
Re : [resolue]Comment creer partition /home et /swap
A force de lire les differentes doc sur l'installation en dual boot , je vais finir par prendre peur .... lol
non autrement dit j'ai pas envie de faire une boulette en allant trop vite !
beaucoup de parametre entre en jeux , et c'est plus complex que je croyais
Hors ligne
#9 Le 15/01/2015, à 11:55
- Ayral
Re : [resolue]Comment creer partition /home et /swap
Tu as raison c'est devenu plus complexe depuis l'adoption du boot uefi. Mais c'est tout à fait faisable !
Pour mettre les retours de commande entre deux balises code, les explications sont là : https://forum.ubuntu-fr.org/viewtopic.php?id=1614731
Blog d'un retraité
Site de graphisme du fiston Loïc
Ubuntu 22.04 LTS sur un Thinkpad W540
Hors ligne
#10 Le 15/01/2015, à 12:12
- malbo
Re : [resolue]Comment creer partition /home et /swap
je vais finir par prendre peur ....
Il n'y a que les cons qui n'ont pas peur. En fait eux, c'est "après" qu'ils ont peur : "mon ordi ne démarre plus sous Windows ! urgence qui peut m'aider !!!!!!"
Pour t'assister, en plus des doc recommandés par Ayral, je te conseille de t'appuyer sur ce pas à pas "efi un jeu d'enfant" du site "Libre à Quimperlé" : http://libre.a.quimperle.perso.sfr.fr/2014/efi/efi.html
Dernière modification par malbo (Le 15/01/2015, à 12:16)
Hors ligne
#11 Le 15/01/2015, à 13:03
- lozolol63
Re : [resolue]Comment creer partition /home et /swap
Ce tutto est super
encore merci ; Je laisse le sujet ouvert au cas ou j'aurais d'autres questions ;
Pour le moment je v me contenter de bien étudier les différentes Doc
Slt a+
Hors ligne
#12 Le 15/01/2015, à 19:05
- lozolol63
Re : [resolue]Comment creer partition /home et /swap
bonsoir me re voilas ;
Vos documents et tutos mon étaient d'une grande aide
J'ai finalement reussi mon installation de ubuntu ,
J'ai tout de meme un ptit probleme, a la fin de l'instal l'ordi redemarre direct sur windows sans proposer le choix de L'OS....
je sais que g vu passer cette question sur les forum et dans les tutos mais si vous pouviez me donner la solution svp ce serait sympas.
c'est en rapport avec le bios je crois? options aux demarage du Pc?
encore merci pour votre aide
Hors ligne
#13 Le 15/01/2015, à 19:15
- malbo
Re : [resolue]Comment creer partition /home et /swap
C'est provisoire (on peut faire mieux) mais pour aller sur Ubuntu, tu peux déjà passer par Windows en suivant la procédure de kokotx dans ce post : http://forum.ubuntu-fr.org/viewtopic.ph … #p17730601
Hors ligne
#14 Le 15/01/2015, à 19:53
- lozolol63
Re : [resolue]Comment creer partition /home et /swap
Nickel Merci encore sa a Marcher ; je te repond depuis ubuntu que du bonheur
merci encore et bonne soirée
Hors ligne
#15 Le 15/01/2015, à 19:55
- lozolol63
Re : [resolue]Comment creer partition /home et /swap
encore une question ; on fait comment pour marquer comme resolue sur ce forum?
Hors ligne
#16 Le 15/01/2015, à 21:17
- malbo
Re : [resolue]Comment creer partition /home et /swap
Ce serait bien que tu vérifies également que tu peux démarrer sur Ubuntu en démarrant l'ordi avec la touche F12 enfoncée : cela doit permettre d'accéder à un Boot Menu dans lequel tu dois trouver une entrée "ubuntu" et tu peux démarrer dessus directement. Peux-tu le vérifier et dire si ça fonctionne ?
Hors ligne
#17 Le 15/01/2015, à 21:59
- Ayral
Re : [resolue]Comment creer partition /home et /swap
encore une question ; on fait comment pour marquer comme résolue sur ce forum?
C'est expliqué dans les règles du forum.
Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont. Cette manipulation s'effectue en modifiant le titre de votre premier message. Si vous n'étiez pas inscrit à ce moment, signalez votre message.
Merci d'avance.
Pour mettre les retours de commande entre deux balises code, les explications sont là : https://forum.ubuntu-fr.org/viewtopic.php?id=1614731
Blog d'un retraité
Site de graphisme du fiston Loïc
Ubuntu 22.04 LTS sur un Thinkpad W540
Hors ligne
#18 Le 15/01/2015, à 22:12
- lozolol63
Re : [resolue]Comment creer partition /home et /swap
Ce serait bien que tu vérifies également que tu peux démarrer sur Ubuntu en démarrant l'ordi avec la touche F12 enfoncée : test réalisé avec succès , il me donne Windows en 1, ubuntu en 2, et un autre truc hdd en 3.
petite précision, j'ai juste appuyer F12 "sans maintenir enfoncé ", toute suite au démarrage et ça réagit direct .
En sachant ça , pas besoin de Grub ni de passer par le bios avec F2 pour modifier l'ordre du boot.
Nickel sur ce bonsoir
Dernière modification par Ayral (Le 16/01/2015, à 00:17)
Hors ligne
#19 Le 16/01/2015, à 07:38
- malbo
Re : [resolue]Comment creer partition /home et /swap
Bonjour,
Je viens de mentionner ton cas dans la Liste des portables « Acer » concernant le modèle Aspire E1-531.
Pour que ça serve d'exemple d'installation à ceux qui ont le même modèle, pourrais-tu faire un Boot-Info depuis une session de ton Ubuntu fraîchement installé et indiquer l'URL de ce Boot-Info dans ta réponse ?
Hors ligne
#20 Le 16/01/2015, à 08:30
- lozolol63
Re : [resolue]Comment creer partition /home et /swap
bonjour
oui bon je te fais sa dans un ptit moment ...
F§aut que jme reveil
a+ tard
Hors ligne
#21 Le 16/01/2015, à 09:45
- lozolol63
Re : [resolue]Comment creer partition /home et /swap
Bon avant de tout, puisque tu va citer mon cas, je tiens a préciser un problème que j'ai rencontrer lors des premières manip pour l'installation de Ubuntu et qui je pense peu arriver a d'autres;
C'est a dire pour créer un espace libre non alloué :
lorsque j'ai voulu réduire la partition de c: sur mon disque dur qui est presque vide; L'espace maximum que je pouvais réduire été de seulement 680Mo alors que le volume en fait plus de 400Go !!
(captures d'écrans du gestionnaire de disque: http://cjoint.com/?0Appe4wKyWe )
Sachant qu'il faut au minimum 18Go d'espace libre pour l'installation de Ubuntu;
J'ai trouver la solution sur un autre forum:
supprimer provisoirement le fichier d’échange
vous suivez ce tuto http://www.pcastuces.com/pratique/windo … /page4.htm
vous définissez aucun fichier échange
vous redémarrez
vous supprimez pagefile.sys , dans votre disque c
vous essayez de redimensionner votre partition
quand c'est ok , vous retournez sur le tuto , et remettez un fichier d’échange sur le C:
vous redémarrez
Voilas c'est tout , je pense que ça peu aider quelqu'un d'autre.
Je vais maintenant passer sur Ubuntu et faire la manip que tu ma demander .
Hors ligne
#22 Le 16/01/2015, à 10:31
- lozolol63
Re : [resolue]Comment creer partition /home et /swap
rapport boot repair : http://paste.ubuntu.com/9760557/
Hors ligne
#23 Le 16/01/2015, à 12:10
- malbo
Re : [resolue]Comment creer partition /home et /swap
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Nov2014]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi
/EFI/OEM/Boot/bootmgfw.efi /EFI/OEM/Boot/bootmgr.efi
/EFI/OEM/Boot/memtest.efi
sda3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /Windows/System32/winload.exe
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda7: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda8: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda9: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda10: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 821,247 819,200 Windows Recovery Environment (Windows)
/dev/sda2 821,248 1,435,647 614,400 EFI System partition
/dev/sda3 1,435,648 1,697,791 262,144 Microsoft Reserved Partition (Windows)
/dev/sda4 1,697,792 804,233,215 802,535,424 Data partition (Windows/Linux)
/dev/sda5 935,790,592 936,712,191 921,600 Windows Recovery Environment (Windows)
/dev/sda6 936,712,192 937,428,991 716,800 Windows Recovery Environment (Windows)
/dev/sda7 937,428,992 976,773,119 39,344,128 Windows Recovery Environment (Windows)
/dev/sda8 804,233,216 865,673,215 61,440,000 Data partition (Linux)
/dev/sda9 865,673,216 873,865,215 8,192,000 Swap partition (Linux)
/dev/sda10 873,865,216 935,790,591 61,925,376 Data partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 3E8E1FF18E1FA087 ntfs Recovery
/dev/sda10 4c1991d6-f37b-4952-956b-2a8ff17ee6e0 ext4
/dev/sda2 C222-A86E vfat ESP
/dev/sda4 10A4253AA4252426 ntfs Acer
/dev/sda5 A878007278004194 ntfs
/dev/sda6 7A4C62B04C6266BB ntfs
/dev/sda7 3C2E271E2E26D0A6 ntfs Push Button Reset
/dev/sda8 72337602-e1b1-4698-99dc-069a596c6f82 ext4
/dev/sda9 3623f419-4721-449f-b549-551f6bb10aa3 swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 16 09:50 ata-MATSHITA_DVD-RAM_UJ8E1_SAD0710728 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 16 10:20 ata-ST500LT012-9WS142_W0V5P4P9 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 16 10:20 ata-ST500LT012-9WS142_W0V5P4P9-part1 -> ../../sda1
lrwxrwxrwx 1 root root 11 Jan 16 09:51 ata-ST500LT012-9WS142_W0V5P4P9-part10 -> ../../sda10
lrwxrwxrwx 1 root root 10 Jan 16 09:51 ata-ST500LT012-9WS142_W0V5P4P9-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 16 09:50 ata-ST500LT012-9WS142_W0V5P4P9-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jan 16 09:50 ata-ST500LT012-9WS142_W0V5P4P9-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Jan 16 10:20 ata-ST500LT012-9WS142_W0V5P4P9-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Jan 16 10:20 ata-ST500LT012-9WS142_W0V5P4P9-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Jan 16 10:20 ata-ST500LT012-9WS142_W0V5P4P9-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 Jan 16 09:50 ata-ST500LT012-9WS142_W0V5P4P9-part8 -> ../../sda8
lrwxrwxrwx 1 root root 10 Jan 16 09:50 ata-ST500LT012-9WS142_W0V5P4P9-part9 -> ../../sda9
lrwxrwxrwx 1 root root 9 Jan 16 10:20 wwn-0x5000c5005e481509 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 16 10:20 wwn-0x5000c5005e481509-part1 -> ../../sda1
lrwxrwxrwx 1 root root 11 Jan 16 09:51 wwn-0x5000c5005e481509-part10 -> ../../sda10
lrwxrwxrwx 1 root root 10 Jan 16 09:51 wwn-0x5000c5005e481509-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 16 09:50 wwn-0x5000c5005e481509-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jan 16 09:50 wwn-0x5000c5005e481509-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Jan 16 10:20 wwn-0x5000c5005e481509-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Jan 16 10:20 wwn-0x5000c5005e481509-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Jan 16 10:20 wwn-0x5000c5005e481509-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 Jan 16 09:50 wwn-0x5000c5005e481509-part8 -> ../../sda8
lrwxrwxrwx 1 root root 10 Jan 16 09:50 wwn-0x5000c5005e481509-part9 -> ../../sda9
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda10 /home ext4 (rw)
/dev/sda2 /boot/efi vfat (rw)
/dev/sda4 /media/lozoic/Acer fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sda8 / ext4 (rw,errors=remount-ro)
=========================== sda8/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 72337602-e1b1-4698-99dc-069a596c6f82
else
search --no-floppy --fs-uuid --set=root 72337602-e1b1-4698-99dc-069a596c6f82
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-72337602-e1b1-4698-99dc-069a596c6f82' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 72337602-e1b1-4698-99dc-069a596c6f82
else
search --no-floppy --fs-uuid --set=root 72337602-e1b1-4698-99dc-069a596c6f82
fi
linux /boot/vmlinuz-3.13.0-44-generic.efi.signed root=UUID=72337602-e1b1-4698-99dc-069a596c6f82 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-44-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-72337602-e1b1-4698-99dc-069a596c6f82' {
menuentry 'Ubuntu, avec Linux 3.13.0-44-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-44-generic-advanced-72337602-e1b1-4698-99dc-069a596c6f82' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 72337602-e1b1-4698-99dc-069a596c6f82
else
search --no-floppy --fs-uuid --set=root 72337602-e1b1-4698-99dc-069a596c6f82
fi
echo 'Chargement de Linux 3.13.0-44-generic…'
linux /boot/vmlinuz-3.13.0-44-generic.efi.signed root=UUID=72337602-e1b1-4698-99dc-069a596c6f82 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-44-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-44-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-44-generic-recovery-72337602-e1b1-4698-99dc-069a596c6f82' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 72337602-e1b1-4698-99dc-069a596c6f82
else
search --no-floppy --fs-uuid --set=root 72337602-e1b1-4698-99dc-069a596c6f82
fi
echo 'Chargement de Linux 3.13.0-44-generic…'
linux /boot/vmlinuz-3.13.0-44-generic.efi.signed root=UUID=72337602-e1b1-4698-99dc-069a596c6f82 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-44-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-72337602-e1b1-4698-99dc-069a596c6f82' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 72337602-e1b1-4698-99dc-069a596c6f82
else
search --no-floppy --fs-uuid --set=root 72337602-e1b1-4698-99dc-069a596c6f82
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=72337602-e1b1-4698-99dc-069a596c6f82 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-72337602-e1b1-4698-99dc-069a596c6f82' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt8 --hint-efi=hd0,gpt8 --hint-baremetal=ahci0,gpt8 72337602-e1b1-4698-99dc-069a596c6f82
else
search --no-floppy --fs-uuid --set=root 72337602-e1b1-4698-99dc-069a596c6f82
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=72337602-e1b1-4698-99dc-069a596c6f82 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-C222-A86E' {
insmod part_gpt
insmod fat
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 C222-A86E
else
search --no-floppy --fs-uuid --set=root C222-A86E
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda8/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda8 during installation
UUID=72337602-e1b1-4698-99dc-069a596c6f82 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
UUID=C222-A86E /boot/efi vfat defaults 0 1
# /home was on /dev/sda10 during installation
UUID=4c1991d6-f37b-4952-956b-2a8ff17ee6e0 /home ext4 defaults 0 2
# swap was on /dev/sda9 during installation
UUID=3623f419-4721-449f-b549-551f6bb10aa3 none swap sw 0 0
--------------------------------------------------------------------------------
ADDITIONAL INFORMATION :
=================== log of boot-repair 2015-01-16__10h20 ===================
boot-repair version : 4ppa32
boot-sav version : 4ppa32
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa32
boot-repair is executed in installed-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-44-generic.efi.signed root=UUID=72337602-e1b1-4698-99dc-069a596c6f82 ro quiet splash vt.handoff=7
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda8:L'OS actuellement utilisé - Ubuntu 14.04.1 LTS CurrentSession:linux
/dev/sda2@/EFI/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
=================== blkid:
/dev/sda1: LABEL="Recovery" UUID="3E8E1FF18E1FA087" TYPE="ntfs"
/dev/sda2: LABEL="ESP" UUID="C222-A86E" TYPE="vfat"
/dev/sda4: LABEL="Acer" UUID="10A4253AA4252426" TYPE="ntfs"
/dev/sda5: UUID="A878007278004194" TYPE="ntfs"
/dev/sda6: UUID="7A4C62B04C6266BB" TYPE="ntfs"
/dev/sda7: LABEL="Push Button Reset" UUID="3C2E271E2E26D0A6" TYPE="ntfs"
/dev/sda8: UUID="72337602-e1b1-4698-99dc-069a596c6f82" TYPE="ext4"
/dev/sda9: UUID="3623f419-4721-449f-b549-551f6bb10aa3" TYPE="swap"
/dev/sda10: UUID="4c1991d6-f37b-4952-956b-2a8ff17ee6e0" TYPE="ext4"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on sda4.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juil. 23 00:21 grub.d
total 76
-rwxr-xr-x 1 root root 9424 mai 15 2014 00_header
-rwxr-xr-x 1 root root 6058 mai 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 2014 40_custom
-rwxr-xr-x 1 root root 216 mai 15 2014 41_custom
-rw-r--r-- 1 root root 483 mai 15 2014 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda8: UUID=C222-A86E (sda2)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
=================== efibootmgr -v
BootCurrent: 0002
Timeout: 2 seconds
BootOrder: 0000,0002,0001
Boot0000* Windows Boot Manager HD(2,c8800,96000,4fa85192-dab0-4b05-8c8a-09955ba06ef5)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...}................
Boot0001* HDD: HD(2,c8800,96000,4fa85192-dab0-4b05-8c8a-09955ba06ef5)File(EFIubuntugrubx64.efi)RC
Boot0002* ubuntu HD(2,c8800,96000,4fa85192-dab0-4b05-8c8a-09955ba06ef5)File(EFIubuntushimx64.efi)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.
=================== PARTITIONS & DISKS:
sda8 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /boot/efi.
sda4 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /media/lozoic/Acer.
sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.
sda6 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda6.
sda7 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda7.
sda10 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /home.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST500LT012-9WS14 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 420MB 419MB ntfs Basic data partition hidden, diag
2 420MB 735MB 315MB fat32 EFI system partition boot
3 735MB 869MB 134MB Microsoft reserved partition msftres
4 869MB 412GB 411GB ntfs Basic data partition msftdata
8 412GB 443GB 31.5GB ext4
9 443GB 447GB 4194MB linux-swap(v1)
10 447GB 479GB 31.7GB ext4
5 479GB 480GB 472MB ntfs hidden, diag
6 480GB 480GB 367MB ntfs hidden, diag
7 480GB 500GB 20.1GB ntfs Basic data partition hidden, diag
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:4096:gpt:ATA ST500LT012-9WS14;
1:1049kB:420MB:419MB:ntfs:Basic data partition:hidden, diag;
2:420MB:735MB:315MB:fat32:EFI system partition:boot;
3:735MB:869MB:134MB::Microsoft reserved partition:msftres;
4:869MB:412GB:411GB:ntfs:Basic data partition:msftdata;
8:412GB:443GB:31.5GB:ext4::;
9:443GB:447GB:4194MB:linux-swap(v1)::;
10:447GB:479GB:31.7GB:ext4::;
5:479GB:480GB:472MB:ntfs::hidden, diag;
6:480GB:480GB:367MB:ntfs::hidden, diag;
7:480GB:500GB:20.1GB:ntfs:Basic data partition:hidden, diag;
=================== mount:
/dev/sda8 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda10 on /home type ext4 (rw)
/dev/sda2 on /boot/efi type vfat (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=lozoic)
/dev/sda4 on /media/lozoic/Acer type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda7 on /mnt/boot-sav/sda7 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda10 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda10 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
ls: impossible d'accéder à : Aucun fichier ou dossier de ce type
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 7f 0c 00 00 00 00 00 |................|
00000030 55 85 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U...............|
00000040 f6 00 00 00 01 00 00 00 87 a0 1f 8e f1 1f 8e 3e |...............>|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 5e 1b |.X.MSDOS5.0...^.|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 88 0c 00 |........?.......|
00000020 00 60 09 00 51 02 00 00 00 00 00 00 02 00 00 00 |.`..Q...........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 6e a8 22 c2 4e 4f 20 4e 41 4d 45 20 20 |..)n.".NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|.V@.N..V|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |.t.....f@Iu..BOO|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 e8 19 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff b7 d5 2f 00 00 00 00 |.........../....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 26 24 25 a4 3a 25 a4 10 |........&$%.:%..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda5
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 c7 37 |........?......7|
00000020 00 00 00 00 80 00 80 00 ff 0f 0e 00 00 00 00 00 |................|
00000030 00 96 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 94 41 00 78 72 00 78 a8 |.........A.xr.x.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda6
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 18 d5 37 |........?......7|
00000020 00 00 00 00 80 00 80 00 ff ef 0a 00 00 00 00 00 |................|
00000030 aa 74 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |.t..............|
00000040 f6 00 00 00 01 00 00 00 bb 66 62 4c b0 62 4c 7a |.........fbL.bLz|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda7
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 e0 37 |........?......7|
00000020 00 00 00 00 80 00 80 00 ff 57 58 02 00 00 00 00 |.........WX.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 a6 d0 26 2e 1e 27 2e 3c |..........&..'.<|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda8 ext4 29G 4.4G 23G 17% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 378M 1.2M 376M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.9G 156K 1.9G 1% /run/shm
none tmpfs 100M 68K 100M 1% /run/user
/dev/sda10 ext4 29G 302M 28G 2% /home
/dev/sda2 vfat 296M 53M 244M 18% /boot/efi
/dev/sda4 fuseblk 383G 37G 346G 10% /media/lozoic/Acer
/dev/sda1 fuseblk 400M 261M 140M 66% /mnt/boot-sav/sda1
/dev/sda5 fuseblk 450M 340M 111M 76% /mnt/boot-sav/sda5
/dev/sda6 fuseblk 350M 27M 324M 8% /mnt/boot-sav/sda6
/dev/sda7 fuseblk 19G 15G 4.2G 78% /mnt/boot-sav/sda7
=================== fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x8042a8fb
Device Boot Start End Blocks Id System
/dev/sda1 1 976773167 488386583+ ee GPT
Partition 1 does not start on physical sector boundary.
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda8, using the following options: sda2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot use-standard-efi-file
=================== Advice in case of suggested repair
Veuillez désactiver SecureBoot dans le BIOS. Puis réessayez.Voulez-vous continuer ?
=================== Final advice in case of suggested repair
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
Si votre ordinateur redémarre directement sur Windows, essayez de changer l'ordre de démarrage dans votre BIOS.
Si votre BIOS ne permet pas de changer l'ordre de démarrage, changez l'entrée de démarrage par défaut de l'amorceur Windows.
Par exemple, vous pouvez démarrer Windows, puis saisir la commande suivante dans une invite de commande en mode administrateur :
bcdedit /set {bootmgr} path \EFI\...\grub*.efi
=================== User settings
The settings chosen by the user will not act on the boot.
Tout semble normal. Tu n'aurais pas dû faire une partition /home : au lieu de 30 Go pour / et 30 Go pour /home que tu as actuellement, tu aurais mieux fait d'adopter 60 Go pour / (et pas de partition /home). Motif : ta partition /home sera pleine à ras-bord dans l'avenir tandis que ta partition / restera à moitié occupée.
Hors ligne
#24 Le 16/01/2015, à 13:35
- lozolol63
Re : [resolue]Comment creer partition /home et /swap
oui c'est ce que g compris une fois terminer L'instal;
Est-il encore possible de modifier les partitions pour supprimer /home ?
Hors ligne
#25 Le 16/01/2015, à 14:32
- malbo
Re : [resolue]Comment creer partition /home et /swap
Est-il encore possible de modifier les partitions pour supprimer /home ?
Moi je ne sais pas t'aider à faire cela. Je t'ai posé le problème en temps utile (post #2) justement pour t'amener à réfléchir sur ton besoin : tu m'as répondu que tu ne voulais pas de partition /home (post #7) et au final je constate que tu en as créé une. A présent que c'est fait, moi je te suggère de rester comme ça.
Dernière modification par malbo (Le 16/01/2015, à 14:33)
Hors ligne