Ubuntu-fr

YMulleneers

"xorg.conf", modification non-désirée

Bonjour,

Hier soir mon ordinateur avait l'accélération 3D.  Aujourd'hui à  midi, après un redémarrage, la configuration est remplacée par une qui ne marche pas.  L'écran est en basse résolution et aucune console.

Comment éviter que le système modifie le fichier "/etc/X11/xorg.conf" lors du redémarrage avec ce fichier ci ?

L'ancien "xorg.xonf" buggé

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"be"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"NVIDIA Corporation NV34 [GeForce FX 5500]"
	Driver		"nvidia"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"IISonic"
	Option		"DPMS"
        HorizSync       24-80
        VertRefresh     50-75
	# 1280x1024 @ 75.02 Hz (GTF) hsync: 80.20 kHz; pclk: 138.59 MHz
  	Modeline "1280x1024_75.02"  138.59  1280 1368 1504 1728  1024 1025 1028 1069  -HSync +Vsync
        # 1280x1024 @ 60.02 Hz (GTF) hsync: 63.62 kHz; pclk: 108.92 MHz
        Modeline "1280x1024_60.02"  108.92  1280 1360 1496 1712  1024 1025 1028 1060  -HSync +Vsync
	# 1024x768 @ 75.03 Hz (GTF) hsync: 60.17 kHz; pclk: 81.84 MHz
	Modeline "1024x768_75.03"  81.84  1024 1080 1192 1360  768 769 772 802  -HSync +Vsync
	# 1024x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 64.11 MHz
	Modeline "1024x768_60.00"  64.11  1024 1080 1184 1344  768 769 772 795  -HSync +Vsync
 	# 800x600 @ 75.00 Hz (GTF) hsync: 47.02 kHz; pclk: 48.91 MHz
  	Modeline "800x600_75.00"  48.91  800 840 920 1040  600 601 604 627  -HSync +Vsync
 	# 800x600 @ 60.32 Hz (GTF) hsync: 37.52 kHz; pclk: 38.42 MHz
  	Modeline "800x600_60.32"  38.42  800 832 912 1024  600 601 604 622  -HSync +Vsync
	# 720x400 @ 70.01 Hz (GTF) hsync: 29.19 kHz; pclk: 26.16 MHz
  	Modeline "720x400_70.01"  26.16  720 736 808 896  400 401 404 417  -HSync +Vsync
  	# 640x480 @ 75.00 Hz (GTF) hsync: 37.65 kHz; pclk: 30.72 MHz
  	Modeline "640x480_75.00"  30.72  640 664 728 816  480 481 484 502  -HSync +Vsync
	# 640x480 @ 59.94 Hz (GTF) hsync: 29.79 kHz; pclk: 23.83 MHz
  	Modeline "640x480_59.94"  23.83  640 656 720 800  480 481 484 497  -HSync +Vsync
	# 640x350 @ 70.10 Hz (GTF) hsync: 25.59 kHz; pclk: 20.06 MHz
  	Modeline "640x350_70.10"  20.06  640 648 712 784  350 351 354 365  -HSync +Vsync	
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"NVIDIA Corporation NV34 [GeForce FX 5500]"
	Monitor		"IISonic"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1024x768" "800x600" "720x400" "640x480" "640x350"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Le nouveau "xorg.conf" de remplacement aprés l'apparition du bug.

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
#   sudo dpkg-reconfigure -phigh xserver-xorg
Section "Module"
	Load		"glx"
	Load		"v4l"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"be"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
EndSection

Section "Device"
	Identifier	"Failsafe Device"
	Boardname	"vesa"
	Busid		"PCI:1:0:0"
	Driver		"nvidia"
	Screen	0
EndSection

Section "Monitor"
	Identifier	"Failsafe Monitor"
	Vendorname	"Plug 'n' Play"
	Modelname	"Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
	Gamma	1.0
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Failsafe Device"
	Monitor		"Failsafe Monitor"
	Defaultdepth	24
	SubSection "Display"
		Depth	24
		Virtual	1600	1200
		Modes		"800x600@72"	"800x600@75"	"800x600@56"	"800x600@60"	"640x480@75"	"832x624@75"	"640x480@72"	"1024x768@75"	"640x480@60"	"1024x768@70"	"1024x768@60"	"1152x864@75"	"1280x1024@75"	"1280x960@60"	"1280x1024@60"	"1280x960@75"	"1400x1050@60"	"1600x1200@60"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen 0 "Default Screen" 0 0
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
EndSection
Section "device" # 
	Identifier	"device1"
	Boardname	"vesa"
	Busid		"PCI:1:0:0"
	Driver		"nvidia"
	Screen	1
EndSection
Section "screen" # 
	Identifier	"screen1"
	Device		"device1"
	Defaultdepth	24
	Monitor		"monitor1"
EndSection
Section "monitor" # 
	Identifier	"monitor1"
	Gamma	1.0
EndSection
Section "ServerFlags"
EndSection

Il va sans dire que le fichier de remplacement ne marche absoluement pas.

Dernière modification par YMulleneers (Le 31/12/2007, à 17:04)

---

Linux Mint 16

J'aime à utiliser Linux.