#1 Le 04/04/2015, à 08:42
- fry2320
Help! ports usb ne fonctionne plus
Bonjour à tous,
J'ai Ubuntu 14.04 sur un Acer-Aspire E5-471 et depuis quelques jours les ports usb de mon ordinateur ont soudainement arrêter de fonctionner. J'ai essayé de redémarrer mon ordinateur à plusieurs reprise mais rien ne se passe, aucun changement, quand j’insère une clé usb la lumière s'allume mais elle ne marche pas.
J'aurai besoin de quelques suggestions afin de résoudre mon problème s'il vous plait.
Merci d'avance.
Dernière modification par fry2320 (Le 04/04/2015, à 08:55)
Hors ligne
#2 Le 04/04/2015, à 08:54
- MicP
Re : Help! ports usb ne fonctionne plus
Regarde (avec la commande "dmesg") ce que les messages du noyau racontent au sujet de ces clefs qui se sont allumées mais pas mountées.
il devrait y avoir des messages d'erreur
Tu as l'option "-T" de dmesg qui te permettra de savoir à quel moment le message d'erreur a été retourné,
ça te permettra de voir si ça corresponds (en timing) avec l'insertion/retrait de la ou des clefs USB
Tu pourrais utiliser la commande "less" pour naviguer dans le très long fichier généré par "dmesg" (touches flèches Haut, Bas, PgUg, PgDown, "q" pour quitter et "h" pour l'aide)
dmesg -T | lessDernière modification par MicP (Le 04/04/2015, à 08:59)
Hors ligne
#3 Le 04/04/2015, à 09:00
- fry2320
Re : Help! ports usb ne fonctionne plus
Voilà ce que ca me dit quand j'écris "dmesg" que dois-je faire ensuite??
[code][ 0.299519] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.299705] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.299844] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.299865] TCP: reno registered
[ 0.299880] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.299913] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.299990] NET: Registered protocol family 1
[ 0.300002] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.314317] PCI: CLS 64 bytes, default 64
[ 0.314378] Trying to unpack rootfs image as initramfs...
[ 0.740118] Freeing initrd memory: 19536K (ffff8800359c8000 - ffff880036cdc000)
[ 0.740123] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.740126] software IO TLB [mem 0x90ec0000-0x94ec0000] (64MB) mapped at [ffff880090ec0000-ffff880094ebffff]
[ 0.740183] Simple Boot Flag at 0x44 set to 0x1
[ 0.740350] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
[ 0.740356] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
[ 0.740364] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
[ 0.740372] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
[ 0.740419] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.740421] Scanning for low memory corruption every 60 seconds
[ 0.740705] Initialise system trusted keyring
[ 0.740763] audit: initializing netlink socket (disabled)
[ 0.740772] type=2000 audit(1428128048.728:1): initialized
[ 0.777230] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.778392] zbud: loaded
[ 0.778577] VFS: Disk quotas dquot_6.5.2
[ 0.778623] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.779049] fuse init (API version 7.22)
[ 0.779120] msgmni has been set to 15811
[ 0.779177] Key type big_key registered
[ 0.779530] Key type asymmetric registered
[ 0.779533] Asymmetric key parser 'x509' registered
[ 0.779565] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.779602] io scheduler noop registered
[ 0.779604] io scheduler deadline registered (default)
[ 0.779628] io scheduler cfq registered
[ 0.779695] pcieport 0000:00:1c.0: device [8086:9c10] has invalid IRQ; check vendor BIOS
[ 0.779842] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
[ 0.779907] pcieport 0000:00:1c.2: device [8086:9c14] has invalid IRQ; check vendor BIOS
[ 0.780017] pcieport 0000:00:1c.2: irq 57 for MSI/MSI-X
[ 0.780066] pcieport 0000:00:1c.3: device [8086:9c16] has invalid IRQ; check vendor BIOS
[ 0.780169] pcieport 0000:00:1c.3: irq 58 for MSI/MSI-X
[ 0.780247] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.780252] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.780269] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.780271] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.780275] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.780290] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.780292] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.780296] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.780311] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.780343] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 9c10 ss_vid 1025 ss_did 879
[ 0.780375] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.780380] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.780422] efifb: probing for efifb
[ 0.781003] efifb: framebuffer at 0xa0000000, mapped to 0xffffc90010e80000, using 4160k, total 4160k
[ 0.781005] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.781006] efifb: scrolling: redraw
[ 0.781008] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.784597] Console: switching to colour frame buffer device 170x48
[ 0.788055] fb0: EFI VGA frame buffer device
[ 0.788068] intel_idle: MWAIT substates: 0x11142120
[ 0.788070] intel_idle: v0.4 model 0x45
[ 0.788071] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.788220] ipmi message handler version 39.2
[ 0.788313] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.788396] ACPI: AC Adapter [ACAD] (on-line)
[ 0.788566] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.788571] ACPI: Power Button [PWRB]
[ 0.788603] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.788606] ACPI: Sleep Button [SLPB]
[ 0.788638] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.788696] ACPI: Lid Switch [LID]
[ 0.788732] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.788735] ACPI: Power Button [PWRF]
[ 0.789188] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.789191] ACPI: Thermal Zone [TZ01] (45 C)
[ 0.789237] GHES: HEST is not enabled!
[ 0.789350] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.790496] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.790505] ACPI: Battery Slot [BAT1] (battery present)
[ 0.791116] Linux agpgart interface v0.103
[ 0.792305] brd: module loaded
[ 0.792906] loop: module loaded
[ 0.793250] libphy: Fixed MDIO Bus: probed
[ 0.793335] tun: Universal TUN/TAP device driver, 1.6
[ 0.793336] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.793372] PPP generic driver version 2.4.2
[ 0.793408] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.793412] ehci-pci: EHCI PCI platform driver
[ 0.793542] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.793550] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.793563] ehci-pci 0000:00:1d.0: debug port 2
[ 0.797464] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.797480] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb071c000
[ 0.810657] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.810722] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.810725] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.810727] usb usb1: Product: EHCI Host Controller
[ 0.810729] usb usb1: Manufacturer: Linux 3.13.0-49-generic ehci_hcd
[ 0.810730] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.810909] hub 1-0:1.0: USB hub found
[ 0.810917] hub 1-0:1.0: 2 ports detected
[ 0.811011] ehci-platform: EHCI generic platform driver
[ 0.811023] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.811024] ohci-pci: OHCI PCI platform driver
[ 0.811033] ohci-platform: OHCI generic platform driver
[ 0.811040] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.811201] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.811206] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.811288] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.811312] xhci_hcd 0000:00:14.0: irq 59 for MSI/MSI-X
[ 0.811377] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.811379] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.811381] usb usb2: Product: xHCI Host Controller
[ 0.811383] usb usb2: Manufacturer: Linux 3.13.0-49-generic xhci_hcd
[ 0.811385] usb usb2: SerialNumber: 0000:00:14.0
[ 0.811592] hub 2-0:1.0: USB hub found
[ 0.811605] hub 2-0:1.0: 9 ports detected
[ 0.812713] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.812718] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.812754] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.812756] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.812758] usb usb3: Product: xHCI Host Controller
[ 0.812760] usb usb3: Manufacturer: Linux 3.13.0-49-generic xhci_hcd
[ 0.812762] usb usb3: SerialNumber: 0000:00:14.0
[ 0.812977] hub 3-0:1.0: USB hub found
[ 0.812987] hub 3-0:1.0: 4 ports detected
[ 0.818766] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.824614] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.824621] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.824951] mousedev: PS/2 mouse device common for all mice
[ 0.825410] rtc_cmos 00:04: RTC can wake from S4
[ 0.825566] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.825596] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.825676] device-mapper: uevent: version 1.0.3
[ 0.825770] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.825779] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.825781] EFI Variables Facility v0.08 2004-May-17
[ 0.833389] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.855979] TCP: cubic registered
[ 0.856075] NET: Registered protocol family 10
[ 0.856247] NET: Registered protocol family 17
[ 0.856257] Key type dns_resolver registered
[ 0.856907] Loading compiled-in X.509 certificates
[ 0.858019] Loaded X.509 cert 'Magrathea: Glacier signing key: a2f2b984b0f03db60ba1ea081049374c1ac3d902'
[ 0.858031] registered taskstats version 1
[ 0.860713] Key type trusted registered
[ 0.864434] Key type encrypted registered
[ 0.864439] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.864441] IMA: No TPM chip found, activating TPM-bypass!
[ 0.864818] regulator-dummy: disabling
[ 0.864902] Magic number: 11:89:215
[ 0.864921] event_source software: hash matches
[ 0.865013] rtc_cmos 00:04: setting system clock to 2015-04-04 06:14:09 UTC (1428128049)
[ 0.865899] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.865900] EDD information not available.
[ 0.865944] PM: Hibernation image not present or could not be loaded.
[ 0.866823] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000)
[ 0.866825] Write protecting the kernel read-only data: 12288k
[ 0.868476] Freeing unused kernel memory: 796K (ffff880002739000 - ffff880002800000)
[ 0.869755] Freeing unused kernel memory: 688K (ffff880002b54000 - ffff880002c00000)
[ 0.881655] systemd-udevd[122]: starting version 204
[ 0.904733] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.904744] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.905566] ahci 0000:00:1f.2: version 3.0
[ 0.905704] ahci 0000:00:1f.2: irq 60 for MSI/MSI-X
[ 0.911076] r8169 0000:04:00.0: irq 61 for MSI/MSI-X
[ 0.911279] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0xffffc90000c72000, c4:54:44:95:ce:95, XID 0c000800 IRQ 61
[ 0.911282] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.918778] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 0.918784] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.919344] scsi0 : ahci
[ 0.919429] scsi1 : ahci
[ 0.919495] scsi2 : ahci
[ 0.919673] scsi3 : ahci
[ 0.919720] ata1: SATA max UDMA/133 abar m2048@0xb071b000 port 0xb071b100 irq 60
[ 0.919724] ata2: SATA max UDMA/133 abar m2048@0xb071b000 port 0xb071b180 irq 60
[ 0.919726] ata3: DUMMY
[ 0.919727] ata4: DUMMY
[ 1.122954] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.239017] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.239038] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.239804] ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
[ 1.239808] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.240588] ata1.00: configured for UDMA/133
[ 1.240812] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 01.0 PQ: 0 ANSI: 5
[ 1.240988] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.240992] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.240995] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.241063] sd 0:0:0:0: [sda] Write Protect is off
[ 1.241068] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.241090] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.241156] ata2.00: ATAPI: HL-DT-ST DVDRAM GUA0N, 1.00, max UDMA/133
[ 1.242847] ata2.00: configured for UDMA/133
[ 1.246502] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUA0N 1.00 PQ: 0 ANSI: 5
[ 1.252276] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.252280] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.252475] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.252569] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.255271] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.255276] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.255577] hub 1-1:1.0: USB hub found
[ 1.255642] hub 1-1:1.0: 8 ports detected
[ 1.347519] sda: sda1 sda2 sda3
[ 1.348021] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.423184] usb 2-5: new full-speed USB device number 2 using xhci_hcd
[ 1.424936] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4a5f0b)
[ 1.436068] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0d.
[ 1.440519] usb 2-5: New USB device found, idVendor=0489, idProduct=e078
[ 1.440524] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.498051] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[ 1.607334] usb 2-7: new high-speed USB device number 3 using xhci_hcd
[ 1.652742] usb 2-7: New USB device found, idVendor=04f2, idProduct=b452
[ 1.652746] usb 2-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.652749] usb 2-7: Product: HD WebCam
[ 1.652751] usb 2-7: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.652753] usb 2-7: SerialNumber: 0001
[ 1.739394] tsc: Refined TSC clocksource calibration: 2394.456 MHz
[ 1.949234] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.740231] Switched to clocksource tsc
[ 2.768063] random: nonblocking pool is initialized
[ 11.215487] Adding 6179836k swap on /dev/sda3. Priority:-1 extents:1 across:6179836k FS
[ 11.348013] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.469256] systemd-udevd[304]: starting version 204
[ 12.079943] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.081994] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 12.082002] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.082005] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 12.082008] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[ 12.082010] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.082011] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 12.082013] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[ 12.082015] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
[ 12.082017] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.082018] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.268240] lp: driver loaded but no devices found
[ 12.319352] mei_me 0000:00:16.0: irq 62 for MSI/MSI-X
[ 12.380011] Bluetooth: Core ver 2.17
[ 12.380032] NET: Registered protocol family 31
[ 12.380033] Bluetooth: HCI device and connection manager initialized
[ 12.380041] Bluetooth: HCI socket layer initialized
[ 12.380043] Bluetooth: L2CAP socket layer initialized
[ 12.380048] Bluetooth: SCO socket layer initialized
[ 12.418438] wmi: Mapper loaded
[ 12.423304] usbcore: registered new interface driver btusb
[ 12.535946] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 12.536050] acer_wmi: Function bitmap for Communication Button: 0x801
[ 12.536180] acer_wmi: Disabling ACPI video driver
[ 12.554672] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
[ 12.554749] input: Acer WMI hotkeys as /devices/virtual/input/input7
[ 12.555877] input: Acer BMA150 accelerometer as /devices/virtual/input/input8
[ 12.577206] cfg80211: Calling CRDA to update world regulatory domain
[ 12.674019] [drm] Initialized drm 1.1.0 20060810
[ 12.838783] ath: phy0: Set BT/WLAN RX diversity capability
[ 12.843988] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
[ 12.846698] ath: phy0: Enable LNA combining
[ 12.847806] ath: EEPROM regdomain: 0x6c
[ 12.847807] ath: EEPROM indicates we should expect a direct regpair map
[ 12.847809] ath: Country alpha2 being used: 00
[ 12.847811] ath: Regpair used: 0x6c
[ 12.854024] SKU: Nid=0x1d sku_cfg=0x40e00001
[ 12.854026] SKU: port_connectivity=0x1
[ 12.854027] SKU: enable_pcbeep=0x0
[ 12.854027] SKU: check_sum=0x00000000
[ 12.854028] SKU: customization=0x00000000
[ 12.854029] SKU: external_amp=0x0
[ 12.854030] SKU: platform_type=0x0
[ 12.854030] SKU: swap=0x0
[ 12.854031] SKU: override=0x1
[ 12.854194] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.854196] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.854198] hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 12.854199] mono: mono_out=0x0
[ 12.854200] inputs:
[ 12.854202] Mic=0x12
[ 12.854204] realtek: No valid SSID, checking pincfg 0x40e00001 for NID 0x1d
[ 12.854205] realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0283
[ 12.881153] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.881552] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90011700000, irq=19
[ 13.042061] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 13.043966] [drm] Memory usable by graphics device = 2048M
[ 13.043969] checking generic (a0000000 410000) vs hw (a0000000 10000000)
[ 13.043971] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 13.043995] Console: switching to colour dummy device 80x25
[ 13.065598] ppdev: user-space parallel port driver
[ 13.077480] cfg80211: World regulatory domain updated:
[ 13.077483] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.077486] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.077487] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.077489] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.077490] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.077492] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.088576] i915 0000:00:02.0: irq 64 for MSI/MSI-X
[ 13.088586] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.088587] [drm] Driver supports precise vblank timestamp query.
[ 13.088660] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 13.092436] usbcore: registered new interface driver ath3k
[ 13.092479] usb 2-5: USB disconnect, device number 2
[ 13.162734] fbcon: inteldrmfb (fb0) is primary device
[ 13.368834] usb 2-5: new full-speed USB device number 4 using xhci_hcd
[ 13.571078] Linux video capture interface: v2.00
[ 13.819370] intel_rapl: domain uncore energy ctr 8948:8948 not working, skip
[ 13.819658] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b452)
[ 13.820855] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input10
[ 13.820946] usbcore: registered new interface driver uvcvideo
[ 13.820946] USB Video Class driver (1.1.1)
[ 14.745956] Console: switching to colour frame buffer device 170x48
[ 14.748852] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 14.748854] i915 0000:00:02.0: registered panic notifier
[ 14.755470] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 14.755552] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 14.755621] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 14.755819] HDA driver get symbol successfully from i915 module
[ 14.761909] snd_hda_intel 0000:00:03.0: irq 65 for MSI/MSI-X
[ 14.838066] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 14.855636] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 14.855697] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 14.855750] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 15.687453] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 16.208534] init: failsafe main process (717) killed by TERM signal
[ 17.084923] init: cups main process (783) killed by HUP signal
[ 17.084930] init: cups main process ended, respawning
[ 17.127530] Bluetooth: RFCOMM TTY layer initialized
[ 17.127540] Bluetooth: RFCOMM socket layer initialized
[ 17.127544] Bluetooth: RFCOMM ver 1.11
[ 17.143807] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.143811] Bluetooth: BNEP filters: protocol multicast
[ 17.143820] Bluetooth: BNEP socket layer initialized
[ 18.302868] r8169 0000:04:00.0 eth0: link down
[ 18.302918] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.303175] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.316231] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.316496] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.372800] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[ 18.372819] ------------[ cut here ]------------
[ 18.372829] WARNING: CPU: 1 PID: 0 at /build/buildd/linux-3.13.0/drivers/usb/host/xhci-ring.c:1581 handle_cmd_completion+0xe36/0xe40()
[ 18.372831] Modules linked in: bnep rfcomm binfmt_misc nls_iso8859_1 snd_hda_codec_hdmi uvcvideo videobuf2_vmalloc intel_rapl videobuf2_memops x86_pkg_temp_thermal videobuf2_core intel_powerclamp videodev coretemp kvm_intel kvm parport_pc ppdev i915 crct10dif_pclmul crc32_pclmul arc4 ghash_clmulni_intel snd_hda_codec_realtek snd_hda_intel ath9k snd_hda_codec aesni_intel drm_kms_helper aes_x86_64 ath9k_common ath9k_hw snd_hwdep lrw snd_pcm gf128mul ath snd_page_alloc drm mac80211 snd_seq_midi glue_helper snd_seq_midi_event cfg80211 ablk_helper acer_wmi sparse_keymap snd_rawmidi cryptd snd_seq ath3k btusb wmi joydev snd_seq_device serio_raw bluetooth snd_timer i2c_algo_bit mei_me lp video parport mei mac_hid snd lpc_ich soundcore shpchp i2c_designware_platform i2c_designware_core psmouse ahci r8169 libahci mii
[ 18.372881] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-49-generic #81-Ubuntu
[ 18.372882] Hardware name: Acer Aspire E5-471/EA40_HB, BIOS V1.07 05/28/2014
[ 18.372884] 0000000000000009 ffff88025f243da8 ffffffff81721b36 0000000000000000
[ 18.372888] ffff88025f243de0 ffffffff810677dd ffff88024f462400 ffff88024f4620c0
[ 18.372890] 0000000000000003 000000024f4620c0 ffff88024f47a000 ffff88025f243df0
[ 18.372893] Call Trace:
[ 18.372895] <IRQ> [<ffffffff81721b36>] dump_stack+0x45/0x56
[ 18.372903] [<ffffffff810677dd>] warn_slowpath_common+0x7d/0xa0
[ 18.372906] [<ffffffff810678ba>] warn_slowpath_null+0x1a/0x20
[ 18.372909] [<ffffffff8157e7a6>] handle_cmd_completion+0xe36/0xe40
[ 18.372913] [<ffffffff81580083>] xhci_irq+0x333/0xa60
[ 18.372916] [<ffffffff810c79da>] ? rcu_report_qs_rnp+0x7a/0x120
[ 18.372919] [<ffffffff815807c1>] xhci_msi_irq+0x11/0x20
[ 18.372923] [<ffffffff810bfb4e>] handle_irq_event_percpu+0x3e/0x1d0
[ 18.372925] [<ffffffff810bfd1d>] handle_irq_event+0x3d/0x60
[ 18.372928] [<ffffffff810c27a7>] handle_edge_irq+0x77/0x130
[ 18.372934] [<ffffffff81015e5e>] handle_irq+0x1e/0x30
[ 18.372938] [<ffffffff8173495d>] do_IRQ+0x4d/0xc0
[ 18.372941] [<ffffffff8172a02d>] common_interrupt+0x6d/0x6d
[ 18.372943] <EOI> [<ffffffff815d4362>] ? cpuidle_enter_state+0x52/0xc0
[ 18.372950] [<ffffffff815d4489>] cpuidle_idle_call+0xb9/0x1f0
[ 18.372953] [<ffffffff8101d35e>] arch_cpu_idle+0xe/0x30
[ 18.372956] [<ffffffff810befa5>] cpu_startup_entry+0xc5/0x290
[ 18.372961] [<ffffffff8104150d>] start_secondary+0x21d/0x2d0
[ 18.372963] ---[ end trace bd83255452f6fa68 ]---
[ 18.577098] usb 2-5: Device not responding to set address.
[ 18.781174] usb 2-5: device not accepting address 4, error -71
[ 18.837153] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command.
[ 18.837159] xhci_hcd 0000:00:14.0: Assuming host is dying, halting host.
[ 18.837175] xhci_hcd 0000:00:14.0: HC died; cleaning up
[ 18.893239] usb 2-5: new full-speed USB device number 5 using xhci_hcd
[ 19.292503] wlan0: authenticate with 00:17:33:fd:37:c8
[ 19.307086] wlan0: send auth to 00:17:33:fd:37:c8 (try 1/3)
[ 19.309125] wlan0: authenticated
[ 19.309539] wlan0: associate with 00:17:33:fd:37:c8 (try 1/3)
[ 19.312373] wlan0: RX AssocResp from 00:17:33:fd:37:c8 (capab=0x411 status=0 aid=8)
[ 19.312614] wlan0: associated
[ 19.312632] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 20.106760] init: samba-ad-dc main process (896) terminated with status 1
[ 23.209151] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 23.212022] vboxdrv: Found 4 processor cores.
[ 23.212166] vboxdrv: fAsync=0 offMin=0x124 offMax=0x1004
[ 23.212239] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 23.212241] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[ 23.387429] vboxpci: IOMMU not found (not registered)
[ 23.897288] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[ 23.897295] xhci_hcd 0000:00:14.0: Abort the command ring, but the xHCI is dead.
[ 27.009376] init: plymouth-upstart-bridge main process ended, respawning
[ 27.020019] init: plymouth-upstart-bridge main process ended, respawning
[ 29.105530] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[ 29.105535] xhci_hcd 0000:00:14.0: Abort the command ring, but the xHCI is dead.
[ 29.309627] usb 2-5: device not accepting address 5, error -108
[ 34.315704] xhci_hcd 0000:00:14.0: Timeout while waiting for a slot
[ 34.315715] xhci_hcd 0000:00:14.0: Abort the command ring, but the xHCI is dead.
[ 39.322257] xhci_hcd 0000:00:14.0: Timeout while waiting for a slot
[ 39.322267] xhci_hcd 0000:00:14.0: Abort the command ring, but the xHCI is dead.
[ 39.322308] usb 2-7: USB disconnect, device number 3
[ 133.926798] systemd-hostnamed[2824]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 320.922265] udev-discover[19111]: segfault at 18 ip 000000000055ab0f sp 00007ffc644490e0 error 4 in python2.7[400000+2bd000]
[ 337.343221] python[20625]: segfault at 18 ip 000000000055ab0f sp 00007ffc00872d10 error 4 in python2.7[400000+2bd000]
[ 360.888915] python[22629]: segfault at 18 ip 000000000055ab0f sp 00007ffcc3a99730 error 4 in python2.7[400000+2bd000]
[ 369.115079] udev-discover[23328]: segfault at 18 ip 000000000055ab0f sp 00007ffcb798bb10 error 4 in python2.7[400000+2bd000]
[ 1391.991657] systemd-hostnamed[20723]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2319.828560] systemd-hostnamed[27982]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname![/code]Dernière modification par fry2320 (Le 08/04/2015, à 14:24)
Hors ligne
#4 Le 08/04/2015, à 14:25
- fry2320
Re : Help! ports usb ne fonctionne plus
Aider moi svp, qu'est ce que je suis censé faire maintenant stp???
Hors ligne
#5 Le 08/04/2015, à 15:22
- navtex
Re : Help! ports usb ne fonctionne plus
Ce n'est pas encore clair pour nous, branches la clé ensuite tu tapes
dmesg | tail -30Xubuntu sur CLEVO PA7 i5 32ram Jammy Jellyfish
ABientot sur le Libre
Hors ligne
#6 Le 08/04/2015, à 15:27
- fry2320
Re : Help! ports usb ne fonctionne plus
Comment et ou dois-je écrire
tail -30Hors ligne
#7 Le 08/04/2015, à 15:29
- navtex
Re : Help! ports usb ne fonctionne plus
tu fais un copier-coller de la commande donnée au #5 dans un terminal .
Xubuntu sur CLEVO PA7 i5 32ram Jammy Jellyfish
ABientot sur le Libre
Hors ligne
#8 Le 08/04/2015, à 15:31
- fry2320
Re : Help! ports usb ne fonctionne plus
Merci ce que ca me donne:
[18649.150038] usb 1-1.4: SerialNumber: cf008f5413120d
[18649.225923] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[18649.226063] usb-storage 1-1.4:1.0: Quirks match for vid 0457 pid 0151: 80
[18649.226117] scsi4 : usb-storage 1-1.4:1.0
[18649.226305] usbcore: registered new interface driver usb-storage
[18650.227223] scsi 4:0:0:0: Direct-Access JetFlash TS1GJFV60 0.00 PQ: 0 ANSI: 2
[18650.227775] sd 4:0:0:0: Attached scsi generic sg2 type 0
[18650.228733] sd 4:0:0:0: [sdb] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
[18650.230117] sd 4:0:0:0: [sdb] Write Protect is off
[18650.230123] sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
[18650.231992] sd 4:0:0:0: [sdb] Asking for cache data failed
[18650.232000] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[18650.238107] sd 4:0:0:0: [sdb] Asking for cache data failed
[18650.238125] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[18650.380851] sdb: sdb1
[18650.384173] sd 4:0:0:0: [sdb] Asking for cache data failed
[18650.384176] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[18650.384178] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[18650.937655] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[18651.180941] systemd-hostnamed[8315]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[18659.363238] usb 1-1.4: USB disconnect, device number 17
[18668.016011] usb 1-1.4: new full-speed USB device number 18 using ehci-pci
[18668.110211] usb 1-1.4: New USB device found, idVendor=062a, idProduct=4101
[18668.110221] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[18668.110226] usb 1-1.4: Product: 2.4G Keyboard Mouse
[18668.110230] usb 1-1.4: Manufacturer: MOSART Semi.
[18668.112349] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input18
[18668.112606] hid-generic 0003:062A:4101.0003: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:1d.0-1.4/input0
[18668.114829] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input19
[18668.115120] hid-generic 0003:062A:4101.0004: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:1d.0-1.4/input1Hors ligne
#9 Le 08/04/2015, à 15:52
- navtex
Re : Help! ports usb ne fonctionne plus
Le message est pour la clé : Some data may be corrupt. Please run fsck.
tapes donc
sudo fsck -f -y /dev/sdb (ou sdb1 si message relatif )
ensuite : Please install nss-myhostname! donc
sudo apt install nss-myhostnameJe ne fais que suivre les indications données par dmesg .!
Xubuntu sur CLEVO PA7 i5 32ram Jammy Jellyfish
ABientot sur le Libre
Hors ligne
#10 Le 08/04/2015, à 16:01
- fry2320
Re : Help! ports usb ne fonctionne plus
voila ce que ca dit pour
sudo fsck -f -y /dev/sdbpop@201403091:~$ sudo fsck -f -y /dev/sdb
[sudo] password for pop:
fsck de util-linux 2.20.1
e2fsck 1.42.9 (4-Feb-2014)
fsck.ext2: Aucun fichier ou dossier de ce type lors de la tentative d'ouverture de /dev/sdb
Périphérique peut-être inexistant ?et pour
sudo apt install nss-myhostnamepop@201403091:~$ sudo apt install nss-myhostname
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet nss-myhostnameHors ligne
#11 Le 08/04/2015, à 16:02
- navtex
Re : Help! ports usb ne fonctionne plus
ou si tu n'as plus de données importantes et repartir à zero, formates !
sudo umount /dev/sdb1
pour démonter ta clé
puis pour essayer de partitionner
sudo mkfs.vfat -v -n "JETFLASH" /dev/sdb1
Xubuntu sur CLEVO PA7 i5 32ram Jammy Jellyfish
ABientot sur le Libre
Hors ligne
#12 Le 08/04/2015, à 16:03
- fry2320
Re : Help! ports usb ne fonctionne plus
ca veut dire que tout ce qu'il y a sur mon ordi va s'effacer?
Hors ligne
#13 Le 08/04/2015, à 16:09
- navtex
Re : Help! ports usb ne fonctionne plus
non seulement sur ta clé. mieux tu peux voir tout ça en images avec gparted
sudo apt install gparteddémonter vérifier et formater dans les menus !
Xubuntu sur CLEVO PA7 i5 32ram Jammy Jellyfish
ABientot sur le Libre
Hors ligne
#14 Le 08/04/2015, à 16:12
- Braun
Re : Help! ports usb ne fonctionne plus
fry2320 a écrit :
ca veut dire que tout ce qu'il y a sur mon ordi va s'effacer?
Meuh non, si tu ne te trompes pas de cible tu ne reformates que la clef USB et seule celle-ci sera effacée.
A priori je présume que ton système est sur le disque sda et ta clef en sdb.
Dernière modification par Braun (Le 08/04/2015, à 16:14)
Hors ligne
#15 Le 08/04/2015, à 16:13
- fry2320
Re : Help! ports usb ne fonctionne plus
j'ai fait ce que tu m'as dit:
pop@201403091:~$ sudo apt install gparted
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
linux-headers-3.13.0-32 linux-headers-3.13.0-32-generic
linux-headers-3.13.0-35 linux-headers-3.13.0-35-generic
linux-image-3.13.0-32-generic linux-image-3.13.0-35-generic
linux-image-extra-3.13.0-32-generic linux-image-extra-3.13.0-35-generic
linux-signed-image-3.13.0-35-generic
Veuillez utiliser « apt-get autoremove » pour les supprimer.
Les paquets supplémentaires suivants seront installés :
libgtkmm-2.4-1c2a
Paquets suggérés :
xfsprogs reiserfsprogs reiser4progs jfsutils kpartx dmraid gpart
Les NOUVEAUX paquets suivants seront installés :
gparted libgtkmm-2.4-1c2a
0 mis à jour, 2 nouvellement installés, 0 à enlever et 18 non mis à jour.
Il est nécessaire de prendre 1 180 ko dans les archives.
Après cette opération, 6 869 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n]
Réception de : 1 http://archive.ubuntu.com/ubuntu/ trusty/main libgtkmm-2.4-1c2a amd64 1:2.24.4-1ubuntu1 [655 kB]
Réception de : 2 http://archive.ubuntu.com/ubuntu/ trusty/main gparted amd64 0.18.0-1 [524 kB]
1 180 ko réceptionnés en 13s (84,9 ko/s)
Sélection du paquet libgtkmm-2.4-1c2a:amd64 précédemment désélectionné.
(Lecture de la base de données... 351258 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libgtkmm-2.4-1c2a_1%3a2.24.4-1ubuntu1_amd64.deb ...
Dépaquetage de libgtkmm-2.4-1c2a:amd64 (1:2.24.4-1ubuntu1) ...
Sélection du paquet gparted précédemment désélectionné.
Préparation du dépaquetage de .../gparted_0.18.0-1_amd64.deb ...
Dépaquetage de gparted (0.18.0-1) ...
Traitement des actions différées (« triggers ») pour man-db (2.6.7.1-1ubuntu1) ...
Traitement des actions différées (« triggers ») pour hicolor-icon-theme (0.13-1) ...
Traitement des actions différées (« triggers ») pour mime-support (3.54ubuntu1.1) ...
Traitement des actions différées (« triggers ») pour gnome-menus (3.10.1-0ubuntu2) ...
Traitement des actions différées (« triggers ») pour desktop-file-utils (0.22-1ubuntu1) ...
Traitement des actions différées (« triggers ») pour bamfdaemon (0.5.1+14.04.20140409-0ubuntu1) ...
Rebuilding /usr/share/applications/bamf-2.index...
Paramétrage de libgtkmm-2.4-1c2a:amd64 (1:2.24.4-1ubuntu1) ...
Paramétrage de gparted (0.18.0-1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.19-0ubuntu6.6) ...Hors ligne
#16 Le 08/04/2015, à 16:14
- fry2320
Re : Help! ports usb ne fonctionne plus
et maintenant?
Hors ligne
#17 Le 08/04/2015, à 16:20
- navtex
Re : Help! ports usb ne fonctionne plus
sudo fsck -f -y /dev/sdb1 ou regardes un peu gparted (dans les applis)
Bon je m'en vais un moment !
Xubuntu sur CLEVO PA7 i5 32ram Jammy Jellyfish
ABientot sur le Libre
Hors ligne
#18 Le 08/04/2015, à 16:26
- fry2320
Re : Help! ports usb ne fonctionne plus
pop@201403091:~$ sudo fsck -f -y /dev/sdb1
[sudo] password for pop:
fsck de util-linux 2.20.1
e2fsck 1.42.9 (4-Feb-2014)
fsck.ext2: Aucun fichier ou dossier de ce type lors de la tentative d'ouverture de /dev/sdb1
Périphérique peut-être inexistant ?d'accord j'attends tes conseils pour la suite merci
Hors ligne
#19 Le 08/04/2015, à 16:35
- Braun
Re : Help! ports usb ne fonctionne plus
Ta clef est-elle bien branchée ?
Tu lances l'application gparted et regardes si la clef figure dans les disques montés.
Attention gparted est un outil puissant.
Hors ligne
#20 Le 08/04/2015, à 23:05
- J5012
Re : Help! ports usb ne fonctionne plus
le dmesg a dit que la cle en sdb etait du fat-fs
et fsck reporte qu'il ne detecte pas l'ext2 dessus ...
peut-etre forcer la verif avec la commande dosfsck ?
dosfsck -f -y /dev/sdb1Hors ligne
#21 Le 09/04/2015, à 03:47
- Elsimate
Re : Help! ports usb ne fonctionne plus
Bonjour J5012,
J'arrive un peu tard mais tentes ces deux manœuvres et donnes-nous le résultat :
1 ) Si tu insères une clé avant de démarrer la clé est-elle visible après le démarrage ?
2) Avec une clé insérer la commande qui suit monte-t-elle la clé :
sudo lsusb -vSi oui, parcourt ce post tu n'est pas seul à connaître cet embarras. 
Bonne chance !
Elsimate
Dernière modification par Elsimate (Le 09/04/2015, à 03:47)
- La loi est faite pour être appliquée avec jugement, y a que ceux qui en sont dépourvu qui l’applique à la lettre -
Hors ligne
#22 Le 09/04/2015, à 10:39
- fry2320
Re : Help! ports usb ne fonctionne plus
La commande
dosfsck -f -y /dev/sdb1:
pop@201403091:~$ dosfsck -f -y /dev/sdb1
fsck.fat 3.0.26 (2014-03-07)
open: Aucun fichier ou dossier de ce typeLa commande
sudo lsusb -v bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Device Status: 0x0001
Self Powered
Bus 001 Device 020: ID 062a:4101 Creative Labs
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x062a Creative Labs
idProduct 0x4101
bcdDevice 81.13
iManufacturer 1 MOSART Semi.
iProduct 2 2.4G Keyboard Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 168
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0007 1x 7 bytes
bInterval 4
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x8087 Intel Corp.
idProduct 0x8000
bcdDevice 0.04
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 0 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0103 power enable connect
Port 5: 0000.0103 power enable connect
Port 6: 0000.0100 power
Port 7: 0000.0503 highspeed power enable connect
Port 8: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.13
iManufacturer 3 Linux 3.13.0-49-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 3.13
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 31
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
bMaxBurst 0
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.13
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12Que dois-je faire ensuite svp??
Hors ligne
#23 Le 09/04/2015, à 10:51
- fry2320
Re : Help! ports usb ne fonctionne plus
Aucune clé usb ne marche sur cette ordinateur mais si je les mets dans un autre elles fonctionnent parfaitement...
Hors ligne
#24 Le 09/04/2015, à 11:12
- moko138
Re : Help! ports usb ne fonctionne plus
Merci de préciser si ton pc a des prises usb autres que usb3
(= s'il a des prises pas bleues).
Il y a plusieurs problèmes, semble-t-il différents :
[ 0.779695] (...) device [8086:9c10] has invalid IRQ; check vendor BIOS
(...)
[ 23.897295] (...) the xHCI is dead.Il faut les examiner depuis le démarrage.
Donc je te prie de redémarrer SANS tes clefs usb, puis
dès que tu arrives sur le bureau, de faire
cat /var/log/dmesg>dmesg150409.txtpuis tu nous colles ce fichier ici entre balises-code.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#25 Le 09/04/2015, à 15:09
- fry2320
Re : Help! ports usb ne fonctionne plus
Il a une prise usb noir et deux prise usb bleu.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-49-generic (buildd@brownie) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #81-Ubuntu SMP Tue Mar 24 19:29:48 UTC 2015 (Ubuntu 3.13.0-49.81-generic 3.13.11-ckt17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-49-generic.efi.signed root=/dev/sda2 ro quiet splash acpi_backlight=vendor vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000975affff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000975b0000-0x0000000097eaffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000097eb0000-0x000000009c6befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c6bf000-0x000000009c8befff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009c8bf000-0x000000009cebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9cebef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem02: type=0, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001504000) (20MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000001504000-0x0000000002000000) (10MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003404000) (20MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000003404000-0x00000000359c8000) (805MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x00000000359c8000-0x0000000036cdc000) (19MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000036cdc000-0x000000006efaf000) (898MB)
[ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x000000006efaf000-0x0000000094ec0000) (607MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000094ec0000-0x0000000094ee0000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000094ee0000-0x000000009655b000) (22MB)
[ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x000000009655b000-0x000000009672f000) (1MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x000000009672f000-0x00000000975b0000) (14MB)
[ 0.000000] efi: mem17: type=0, attr=0xf, range=[0x00000000975b0000-0x0000000097eb0000) (9MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000097eb0000-0x0000000097ebd000) (0MB)
[ 0.000000] efi: mem19: type=2, attr=0xf, range=[0x0000000097ebd000-0x0000000097ebf000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x0000000097ebf000-0x0000000097f8b000) (0MB)
[ 0.000000] efi: mem21: type=1, attr=0xf, range=[0x0000000097f8b000-0x00000000980bf000) (1MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000980bf000-0x00000000995f2000) (21MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000995f2000-0x000000009a00b000) (10MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x000000009a00b000-0x000000009a010000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x000000009a010000-0x000000009a019000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x000000009a019000-0x000000009a01a000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x000000009a01a000-0x000000009a041000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x000000009a041000-0x000000009a042000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x000000009a042000-0x000000009a18e000) (1MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x000000009a18e000-0x000000009a195000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x000000009a195000-0x000000009a196000) (0MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x000000009a196000-0x000000009a197000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x000000009a197000-0x000000009a19a000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x000000009a19a000-0x000000009a19b000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x000000009a19b000-0x000000009a1e6000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x000000009a1e6000-0x000000009a1e8000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x000000009a1e8000-0x000000009a1ed000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x000000009a1ed000-0x000000009a1ef000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x000000009a1ef000-0x000000009a1f0000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x000000009a1f0000-0x000000009a1f6000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x000000009a1f6000-0x000000009a1fa000) (0MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x000000009a1fa000-0x000000009a1fd000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x000000009a1fd000-0x000000009a1ff000) (0MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x000000009a1ff000-0x000000009a202000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x000000009a202000-0x000000009c0bf000) (30MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x000000009c0bf000-0x000000009c29a000) (1MB)
[ 0.000000] efi: mem47: type=2, attr=0xf, range=[0x000000009c29a000-0x000000009c2a4000) (0MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x000000009c2a4000-0x000000009c6bf000) (4MB)
[ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x000000009c6bf000-0x000000009c8bf000) (2MB)
[ 0.000000] efi: mem50: type=6, attr=0x800000000000000f, range=[0x000000009c8bf000-0x000000009cabf000) (2MB)
[ 0.000000] efi: mem51: type=0, attr=0xf, range=[0x000000009cabf000-0x000000009cebf000) (4MB)
[ 0.000000] efi: mem52: type=10, attr=0xf, range=[0x000000009cebf000-0x000000009cfbf000) (1MB)
[ 0.000000] efi: mem53: type=9, attr=0xf, range=[0x000000009cfbf000-0x000000009cfff000) (0MB)
[ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x000000009cfff000-0x000000009d000000) (0MB)
[ 0.000000] efi: mem55: type=7, attr=0xf, range=[0x0000000100000000-0x000000025f600000) (5622MB)
[ 0.000000] efi: mem56: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem57: type=0, attr=0x0, range=[0x000000009d000000-0x000000009fa00000) (42MB)
[ 0.000000] efi: mem58: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem59: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB)
[ 0.000000] efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb10000) (0MB)
[ 0.000000] efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
[ 0.000000] efi: mem63: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem64: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem65: type=11, attr=0x8000000000000001, range=[0x00000000ffa00000-0x0000000100000000) (6MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Acer Aspire E5-471/EA40_HB, BIOS V1.07 05/28/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
[ 0.000000] reg 1, base: 2512MB, range: 16MB, type UC
[ 0.000000] reg 2, base: 2528MB, range: 32MB, type UC
[ 0.000000] reg 3, base: 2560MB, range: 512MB, type UC
[ 0.000000] reg 4, base: 3GB, range: 1GB, type UC
[ 0.000000] total RAM covered: 14800M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 2512MB, range: 16MB, type UC
[ 0.000000] reg 3, base: 2528MB, range: 32MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 8GB, type WB
[ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000007e000] 7e000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02fe2000, 0x02fe2fff] PGTABLE
[ 0.000000] BRK [0x02fe3000, 0x02fe3fff] PGTABLE
[ 0.000000] BRK [0x02fe4000, 0x02fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
[ 0.000000] [mem 0x25f400000-0x25f5fffff] page 2M
[ 0.000000] BRK [0x02fe5000, 0x02fe5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
[ 0.000000] [mem 0x25c000000-0x25f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
[ 0.000000] [mem 0x200000000-0x23fffffff] page 1G
[ 0.000000] [mem 0x240000000-0x25bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x975affff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x973fffff] page 2M
[ 0.000000] [mem 0x97400000-0x975affff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x97eb0000-0x9c6befff]
[ 0.000000] [mem 0x97eb0000-0x97ffffff] page 4k
[ 0.000000] [mem 0x98000000-0x9c5fffff] page 2M
[ 0.000000] [mem 0x9c600000-0x9c6befff] page 4k
[ 0.000000] BRK [0x02fe6000, 0x02fe6fff] PGTABLE
[ 0.000000] BRK [0x02fe7000, 0x02fe7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x359c8000-0x36cdbfff]
[ 0.000000] ACPI: RSDP 000000009cffe014 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 000000009cffe210 0000AC (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009cff8000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
[ 0.000000] ACPI: DSDT 000000009cfe4000 01074A (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 000000009cfba000 000040
[ 0.000000] ACPI: UEFI 000000009cffd000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: FPDT 000000009cffb000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASF! 000000009cff9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 000000009cff7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 000000009cff6000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 000000009cff5000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: WDAT 000000009cfe3000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: BOOT 000000009cfe1000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: LPIT 000000009cfe0000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: ASPT 000000009cfde000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DBGP 000000009cfdd000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 000000009cfdc000 000539 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 000000009cfdb000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 000000009cfd8000 002F39 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: CSRT 000000009cfd6000 0000C4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: BGRT 000000009cfd7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
[ 0.000000] NODE_DATA [mem 0x25f5f8000-0x25f5fcfff]
[ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x25f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0006efff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x975affff]
[ 0.000000] node 0: [mem 0x97eb0000-0x9c6befff]
[ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] node 0: [mem 0x100000000-0x25f5fffff]
[ 0.000000] On node 0 totalpages: 2077510
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9911 pages used for memmap
[ 0.000000] DMA32 zone: 634304 pages, LIFO batch:31
[ 0.000000] Normal zone: 22488 pages used for memmap
[ 0.000000] Normal zone: 1439232 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x975b0000-0x97eaffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c6bf000-0x9c8befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c8bf000-0x9cebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88025f200000 s82368 r8192 d24128 u262144
[ 0.000000] pcpu-alloc: s82368 r8192 d24128 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2045025
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-49-generic.efi.signed root=/dev/sda2 ro quiet splash acpi_backlight=vendor vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8012936K/8310040K available (7386K kernel code, 1145K rwdata, 3408K rodata, 1340K init, 1444K bss, 297104K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] NR_IRQS:16640 nr_irqs:1016 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2394.434 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.86 BogoMIPS (lpj=9577736)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.015812] Security Framework initialized
[ 0.015834] AppArmor: AppArmor initialized
[ 0.015835] Yama: becoming mindful.
[ 0.016582] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.018758] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.019684] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019698] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019948] Initializing cgroup subsys memory
[ 0.019955] Initializing cgroup subsys devices
[ 0.019957] Initializing cgroup subsys freezer
[ 0.019959] Initializing cgroup subsys blkio
[ 0.019960] Initializing cgroup subsys perf_event
[ 0.019963] Initializing cgroup subsys hugetlb
[ 0.019989] CPU: Physical Processor ID: 0
[ 0.019990] CPU: Processor Core ID: 0
[ 0.019996] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.019996] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.021215] mce: CPU supports 7 MCE banks
[ 0.021231] CPU0: Thermal monitoring enabled (TM1)
[ 0.021245] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.021245] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[ 0.021245] tlb_flushall_shift: 6
[ 0.021386] Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000)
[ 0.022701] ACPI: Core revision 20131115
[ 0.033306] ACPI: All ACPI Tables successfully acquired
[ 0.040389] ftrace: allocating 28567 entries in 112 pages
[ 0.057371] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.097090] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
[ 0.097098] TSC deadline timer enabled
[ 0.097109] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.097118] ... version: 3
[ 0.097119] ... bit width: 48
[ 0.097120] ... generic registers: 4
[ 0.097121] ... value mask: 0000ffffffffffff
[ 0.097123] ... max period: 0000ffffffffffff
[ 0.097124] ... fixed-purpose events: 3
[ 0.097125] ... event mask: 000000070000000f
[ 0.099246] x86: Booting SMP configuration:
[ 0.113787] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.099249] .... node #0, CPUs: #1 #2 #3
[ 0.142767] x86: Booted up 1 node, 4 CPUs
[ 0.142771] smpboot: Total of 4 processors activated (19155.47 BogoMIPS)
[ 0.147782] devtmpfs: initialized
[ 0.152449] EVM: security.selinux
[ 0.152451] EVM: security.SMACK64
[ 0.152452] EVM: security.ima
[ 0.152453] EVM: security.capability
[ 0.152512] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[ 0.153450] pinctrl core: initialized pinctrl subsystem
[ 0.153515] regulator-dummy: no parameters
[ 0.153549] RTC time: 12:57:19, date: 04/09/15
[ 0.153587] NET: Registered protocol family 16
[ 0.153707] cpuidle: using governor ladder
[ 0.153709] cpuidle: using governor menu
[ 0.153761] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.153763] ACPI: bus type PCI registered
[ 0.153765] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.153830] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.153833] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.188474] PCI: Using configuration type 1 for base access
[ 0.189574] bio: create slab <bio-0> at 0
[ 0.189742] ACPI: Added _OSI(Module Device)
[ 0.189744] ACPI: Added _OSI(Processor Device)
[ 0.189745] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.189747] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.194811] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.200551] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.203763] ACPI: SSDT 000000009cde6c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20131115)
[ 0.204384] ACPI: Dynamic OEM Table Load:
[ 0.204386] ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20131115)
[ 0.207912] ACPI: SSDT 000000009cde6618 0005AA (v01 PmRef ApIst 00003000 INTL 20131115)
[ 0.208620] ACPI: Dynamic OEM Table Load:
[ 0.208622] ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20131115)
[ 0.211733] ACPI: SSDT 000000009cde5d98 000119 (v01 PmRef ApCst 00003000 INTL 20131115)
[ 0.212347] ACPI: Dynamic OEM Table Load:
[ 0.212349] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20131115)
[ 0.219795] ACPI: Interpreter enabled
[ 0.219805] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.219813] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.219835] ACPI: (supports S0 S3 S4 S5)
[ 0.219837] ACPI: Using IOAPIC for interrupt routing
[ 0.219869] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.220085] ACPI: No dock devices found.
[ 0.230053] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.230061] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.230696] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.231537] PCI host bridge to bus 0000:00
[ 0.231541] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.231543] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.231545] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.231547] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.231549] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.231559] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.231755] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.231771] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
[ 0.231779] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.231785] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.231971] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.231981] pci 0000:00:03.0: reg 0x10: [mem 0xb0710000-0xb0713fff 64bit]
[ 0.232193] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.232213] pci 0000:00:14.0: reg 0x10: [mem 0xb0700000-0xb070ffff 64bit]
[ 0.232279] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.232416] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.232451] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.232474] pci 0000:00:16.0: reg 0x10: [mem 0xb0718000-0xb071801f 64bit]
[ 0.232549] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.232727] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.232742] pci 0000:00:1b.0: reg 0x10: [mem 0xb0714000-0xb0717fff 64bit]
[ 0.232810] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.232952] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.232982] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.233052] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.233193] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.233223] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.233292] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.233433] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.233464] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.233533] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.233674] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.233713] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.233939] pci 0000:00:1d.0: reg 0x10: [mem 0xb071c000-0xb071c3ff]
[ 0.235181] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.235340] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.235380] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.235661] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.235679] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.235687] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.235695] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.235703] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.235711] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.235719] pci 0000:00:1f.2: reg 0x24: [mem 0xb071b000-0xb071b7ff]
[ 0.235759] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.235920] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.235935] pci 0000:00:1f.3: reg 0x10: [mem 0xb0719000-0xb07190ff 64bit]
[ 0.235957] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.236178] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.236261] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.236279] pci 0000:04:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.236309] pci 0000:04:00.0: reg 0x18: [mem 0xb0600000-0xb0600fff 64bit]
[ 0.236329] pci 0000:04:00.0: reg 0x20: [mem 0xb0400000-0xb0403fff 64bit pref]
[ 0.236409] pci 0000:04:00.0: supports D1 D2
[ 0.236411] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.236446] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.245999] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.246003] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.246007] pci 0000:00:1c.2: bridge window [mem 0xb0600000-0xb06fffff]
[ 0.246012] pci 0000:00:1c.2: bridge window [mem 0xb0400000-0xb04fffff 64bit pref]
[ 0.246092] pci 0000:05:00.0: [168c:0036] type 00 class 0x028000
[ 0.246115] pci 0000:05:00.0: reg 0x10: [mem 0xb0500000-0xb057ffff 64bit]
[ 0.246171] pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.246228] pci 0000:05:00.0: supports D1 D2
[ 0.246230] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.246258] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.254007] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.254013] pci 0000:00:1c.3: bridge window [mem 0xb0500000-0xb05fffff]
[ 0.254036] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.276186] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.276243] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.276297] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.276349] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.276402] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.276459] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.276511] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.276563] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.277043] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.277051] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.277133] Found 1 acpi root devices
[ 0.277183] ACPI : EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
[ 0.277286] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.277288] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.277291] vgaarb: loaded
[ 0.277293] vgaarb: bridge control possible 0000:00:02.0
[ 0.277469] SCSI subsystem initialized
[ 0.277521] libata version 3.00 loaded.
[ 0.277540] ACPI: bus type USB registered
[ 0.277556] usbcore: registered new interface driver usbfs
[ 0.277566] usbcore: registered new interface driver hub
[ 0.277589] usbcore: registered new device driver usb
[ 0.277703] PCI: Using ACPI for IRQ routing
[ 0.283885] PCI: pci_cache_line_size set to 64 bytes
[ 0.283927] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.283929] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.283931] e820: reserve RAM buffer [mem 0x975b0000-0x97ffffff]
[ 0.283933] e820: reserve RAM buffer [mem 0x9c6bf000-0x9fffffff]
[ 0.283934] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.283936] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[ 0.284020] NetLabel: Initializing
[ 0.284021] NetLabel: domain hash size = 128
[ 0.284022] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.284036] NetLabel: unlabeled traffic allowed by default
[ 0.284099] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.284105] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.286143] Switched to clocksource hpet
[ 0.291469] AppArmor: AppArmor Filesystem Enabled
[ 0.291491] pnp: PnP ACPI init
[ 0.291506] ACPI: bus type PNP registered
[ 0.291547] pnp 00:00: [dma 4]
[ 0.291569] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.291593] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.291721] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.291791] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.291794] system 00:03: [io 0xffff] has been reserved
[ 0.291796] system 00:03: [io 0xffff] has been reserved
[ 0.291798] system 00:03: [io 0xffff] has been reserved
[ 0.291801] system 00:03: [io 0x1800-0x18fe] could not be reserved
[ 0.291803] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.291806] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.291851] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.291900] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.291903] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.291940] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.291984] pnp 00:07: Plug and Play ACPI device, IDs ETD050a PNP0f13 PNP0f03 (active)
[ 0.292133] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.292136] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.292138] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.292140] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.292143] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.292145] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.292147] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.292149] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.292151] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.292154] system 00:08: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 0.292156] system 00:08: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.292158] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.292373] system 00:09: [mem 0xfe102000-0xfe102fff] has been reserved
[ 0.292375] system 00:09: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.292378] system 00:09: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.292380] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.292864] pnp: PnP ACPI: found 10 devices
[ 0.292865] ACPI: bus type PNP unregistered
[ 0.299069] pci 0000:05:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.299082] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.299085] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.299087] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.299105] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.299107] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.299110] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.299114] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
[ 0.299117] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.299120] pci 0000:00:1c.3: BAR 15: assigned [mem 0x9ff00000-0x9fffffff pref]
[ 0.299123] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.299126] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.299129] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.299134] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fcfffff]
[ 0.299138] pci 0000:00:1c.0: bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.299144] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.299146] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.299151] pci 0000:00:1c.2: bridge window [mem 0xb0600000-0xb06fffff]
[ 0.299155] pci 0000:00:1c.2: bridge window [mem 0xb0400000-0xb04fffff 64bit pref]
[ 0.299162] pci 0000:05:00.0: BAR 6: assigned [mem 0x9ff00000-0x9ff0ffff pref]
[ 0.299164] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.299168] pci 0000:00:1c.3: bridge window [mem 0xb0500000-0xb05fffff]
[ 0.299172] pci 0000:00:1c.3: bridge window [mem 0x9ff00000-0x9fffffff pref]
[ 0.299179] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.299181] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.299183] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.299185] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 0.299187] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.299189] pci_bus 0000:02: resource 1 [mem 0x9fb00000-0x9fcfffff]
[ 0.299191] pci_bus 0000:02: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.299193] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.299195] pci_bus 0000:04: resource 1 [mem 0xb0600000-0xb06fffff]
[ 0.299197] pci_bus 0000:04: resource 2 [mem 0xb0400000-0xb04fffff 64bit pref]
[ 0.299199] pci_bus 0000:05: resource 1 [mem 0xb0500000-0xb05fffff]
[ 0.299201] pci_bus 0000:05: resource 2 [mem 0x9ff00000-0x9fffffff pref]
[ 0.299236] NET: Registered protocol family 2
[ 0.299491] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.299676] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.299816] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.299837] TCP: reno registered
[ 0.299852] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.299885] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.299963] NET: Registered protocol family 1
[ 0.299976] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.314289] PCI: CLS 64 bytes, default 64
[ 0.314350] Trying to unpack rootfs image as initramfs...
[ 0.740182] Freeing initrd memory: 19536K (ffff8800359c8000 - ffff880036cdc000)
[ 0.740187] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.740190] software IO TLB [mem 0x90ec0000-0x94ec0000] (64MB) mapped at [ffff880090ec0000-ffff880094ebffff]
[ 0.740247] Simple Boot Flag at 0x44 set to 0x1
[ 0.740416] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
[ 0.740422] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
[ 0.740430] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
[ 0.740438] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
[ 0.740485] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.740487] Scanning for low memory corruption every 60 seconds
[ 0.740805] Initialise system trusted keyring
[ 0.740853] audit: initializing netlink socket (disabled)
[ 0.740868] type=2000 audit(1428584239.728:1): initialized
[ 0.777218] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.778397] zbud: loaded
[ 0.778582] VFS: Disk quotas dquot_6.5.2
[ 0.778625] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.779057] fuse init (API version 7.22)
[ 0.779135] msgmni has been set to 15811
[ 0.779192] Key type big_key registered
[ 0.779599] Key type asymmetric registered
[ 0.779602] Asymmetric key parser 'x509' registered
[ 0.779632] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.779670] io scheduler noop registered
[ 0.779673] io scheduler deadline registered (default)
[ 0.779698] io scheduler cfq registered
[ 0.779762] pcieport 0000:00:1c.0: device [8086:9c10] has invalid IRQ; check vendor BIOS
[ 0.779917] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
[ 0.779983] pcieport 0000:00:1c.2: device [8086:9c14] has invalid IRQ; check vendor BIOS
[ 0.780094] pcieport 0000:00:1c.2: irq 57 for MSI/MSI-X
[ 0.780144] pcieport 0000:00:1c.3: device [8086:9c16] has invalid IRQ; check vendor BIOS
[ 0.780246] pcieport 0000:00:1c.3: irq 58 for MSI/MSI-X
[ 0.780325] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.780330] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.780346] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.780348] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.780352] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.780367] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.780369] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.780372] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.780385] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.780416] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 9c10 ss_vid 1025 ss_did 879
[ 0.780451] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.780456] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.780496] efifb: probing for efifb
[ 0.781078] efifb: framebuffer at 0xa0000000, mapped to 0xffffc90010e80000, using 4160k, total 4160k
[ 0.781080] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.781081] efifb: scrolling: redraw
[ 0.781083] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.784459] Console: switching to colour frame buffer device 170x48
[ 0.787912] fb0: EFI VGA frame buffer device
[ 0.787927] intel_idle: MWAIT substates: 0x11142120
[ 0.787928] intel_idle: v0.4 model 0x45
[ 0.787930] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.788080] ipmi message handler version 39.2
[ 0.788173] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.788253] ACPI: AC Adapter [ACAD] (on-line)
[ 0.788424] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.788428] ACPI: Power Button [PWRB]
[ 0.788460] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.788462] ACPI: Sleep Button [SLPB]
[ 0.788494] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.788555] ACPI: Lid Switch [LID]
[ 0.788587] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.788589] ACPI: Power Button [PWRF]
[ 0.789018] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.789021] ACPI: Thermal Zone [TZ01] (60 C)
[ 0.789062] GHES: HEST is not enabled!
[ 0.789168] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.790302] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.790310] ACPI: Battery Slot [BAT1] (battery present)
[ 0.790943] Linux agpgart interface v0.103
[ 0.792177] brd: module loaded
[ 0.792844] loop: module loaded
[ 0.793190] libphy: Fixed MDIO Bus: probed
[ 0.793276] tun: Universal TUN/TAP device driver, 1.6
[ 0.793277] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.793322] PPP generic driver version 2.4.2
[ 0.793363] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.793367] ehci-pci: EHCI PCI platform driver
[ 0.793502] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.793508] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.793521] ehci-pci 0000:00:1d.0: debug port 2
[ 0.797440] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.797469] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb071c000
[ 0.806572] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.806617] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.806619] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.806621] usb usb1: Product: EHCI Host Controller
[ 0.806623] usb usb1: Manufacturer: Linux 3.13.0-49-generic ehci_hcd
[ 0.806625] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.806751] hub 1-0:1.0: USB hub found
[ 0.806757] hub 1-0:1.0: 2 ports detected
[ 0.806837] ehci-platform: EHCI generic platform driver
[ 0.806846] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.806847] ohci-pci: OHCI PCI platform driver
[ 0.806857] ohci-platform: OHCI generic platform driver
[ 0.806863] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.806997] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.807002] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.807084] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.807103] xhci_hcd 0000:00:14.0: irq 59 for MSI/MSI-X
[ 0.807162] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.807164] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.807166] usb usb2: Product: xHCI Host Controller
[ 0.807168] usb usb2: Manufacturer: Linux 3.13.0-49-generic xhci_hcd
[ 0.807170] usb usb2: SerialNumber: 0000:00:14.0
[ 0.807275] hub 2-0:1.0: USB hub found
[ 0.807286] hub 2-0:1.0: 9 ports detected
[ 0.808373] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.808378] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.808414] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.808416] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808418] usb usb3: Product: xHCI Host Controller
[ 0.808420] usb usb3: Manufacturer: Linux 3.13.0-49-generic xhci_hcd
[ 0.808421] usb usb3: SerialNumber: 0000:00:14.0
[ 0.808523] hub 3-0:1.0: USB hub found
[ 0.808532] hub 3-0:1.0: 4 ports detected
[ 0.814743] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.820848] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.820856] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.821199] mousedev: PS/2 mouse device common for all mice
[ 0.821855] rtc_cmos 00:04: RTC can wake from S4
[ 0.822019] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.822048] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.822121] device-mapper: uevent: version 1.0.3
[ 0.822193] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.822201] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.822203] EFI Variables Facility v0.08 2004-May-17
[ 0.830310] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.852582] TCP: cubic registered
[ 0.852681] NET: Registered protocol family 10
[ 0.852852] NET: Registered protocol family 17
[ 0.852868] Key type dns_resolver registered
[ 0.853321] Loading compiled-in X.509 certificates
[ 0.854425] Loaded X.509 cert 'Magrathea: Glacier signing key: a2f2b984b0f03db60ba1ea081049374c1ac3d902'
[ 0.854437] registered taskstats version 1
[ 0.856730] Key type trusted registered
[ 0.860501] Key type encrypted registered
[ 0.860506] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.860509] IMA: No TPM chip found, activating TPM-bypass!
[ 0.860890] regulator-dummy: disabling
[ 0.860971] Magic number: 11:377:986
[ 0.861081] rtc_cmos 00:04: setting system clock to 2015-04-09 12:57:20 UTC (1428584240)
[ 0.861990] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.861992] EDD information not available.
[ 0.862035] PM: Hibernation image not present or could not be loaded.
[ 0.862880] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000)
[ 0.862881] Write protecting the kernel read-only data: 12288k
[ 0.864710] Freeing unused kernel memory: 796K (ffff880002739000 - ffff880002800000)
[ 0.865996] Freeing unused kernel memory: 688K (ffff880002b54000 - ffff880002c00000)
[ 0.878532] systemd-udevd[122]: starting version 204
[ 0.899690] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.899702] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.900827] ahci 0000:00:1f.2: version 3.0
[ 0.900967] ahci 0000:00:1f.2: irq 60 for MSI/MSI-X
[ 0.907142] r8169 0000:04:00.0: irq 61 for MSI/MSI-X
[ 0.907359] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0xffffc90000c72000, c4:54:44:95:ce:95, XID 0c000800 IRQ 61
[ 0.907362] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.914758] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 0.914763] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.915258] scsi0 : ahci
[ 0.915326] scsi1 : ahci
[ 0.915390] scsi2 : ahci
[ 0.915519] scsi3 : ahci
[ 0.915551] ata1: SATA max UDMA/133 abar m2048@0xb071b000 port 0xb071b100 irq 60
[ 0.915554] ata2: SATA max UDMA/133 abar m2048@0xb071b000 port 0xb071b180 irq 60
[ 0.915556] ata3: DUMMY
[ 0.915557] ata4: DUMMY
[ 1.118919] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.234971] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.234993] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.235801] ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
[ 1.235805] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.236672] ata1.00: configured for UDMA/133
[ 1.236897] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 01.0 PQ: 0 ANSI: 5
[ 1.237071] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.237076] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.237110] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.237132] sd 0:0:0:0: [sda] Write Protect is off
[ 1.237136] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.237148] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.238721] ata2.00: ATAPI: HL-DT-ST DVDRAM GUA0N, 1.00, max UDMA/133
[ 1.240271] ata2.00: configured for UDMA/133
[ 1.243964] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUA0N 1.00 PQ: 0 ANSI: 5
[ 1.249772] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.249776] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.249938] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.250020] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.251303] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.251307] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.251568] hub 1-1:1.0: USB hub found
[ 1.251640] hub 1-1:1.0: 8 ports detected
[ 1.293110] sda: sda1 sda2 sda3
[ 1.293869] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.419140] usb 2-5: new full-speed USB device number 2 using xhci_hcd
[ 1.423644] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4a5f0b)
[ 1.434943] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0d.
[ 1.436317] usb 2-5: New USB device found, idVendor=0489, idProduct=e078
[ 1.436321] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.494875] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[ 1.603249] usb 2-7: new high-speed USB device number 3 using xhci_hcd
[ 1.648406] usb 2-7: New USB device found, idVendor=04f2, idProduct=b452
[ 1.648410] usb 2-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.648413] usb 2-7: Product: HD WebCam
[ 1.648415] usb 2-7: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.648416] usb 2-7: SerialNumber: 0001
[ 1.739373] tsc: Refined TSC clocksource calibration: 2394.456 MHz
[ 2.515322] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.740285] Switched to clocksource tsc
[ 2.820025] random: nonblocking pool is initialized
[ 5.732329] Adding 6179836k swap on /dev/sda3. Priority:-1 extents:1 across:6179836k FS
[ 7.140036] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.525652] systemd-udevd[310]: starting version 204
[ 9.496290] lp: driver loaded but no devices found
[ 9.698230] ppdev: user-space parallel port driver
[ 10.498411] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 10.498419] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.498423] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 10.498428] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[ 10.498431] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.498433] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 10.498437] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[ 10.498449] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
[ 10.498452] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.498454] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.535699] wmi: Mapper loaded
[ 10.557055] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.624973] [drm] Initialized drm 1.1.0 20060810
[ 10.669052] mei_me 0000:00:16.0: irq 62 for MSI/MSI-X
[ 10.795308] [drm] Memory usable by graphics device = 2048M
[ 10.795313] checking generic (a0000000 410000) vs hw (a0000000 10000000)
[ 10.795315] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 10.795332] Console: switching to colour dummy device 80x25
[ 10.850728] i915 0000:00:02.0: irq 63 for MSI/MSI-X
[ 10.850737] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.850738] [drm] Driver supports precise vblank timestamp query.
[ 10.850794] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.901263] cfg80211: Calling CRDA to update world regulatory domain
[ 10.944441] fbcon: inteldrmfb (fb0) is primary device
[ 11.144722] ath: phy0: Set BT/WLAN RX diversity capability
[ 11.151418] ath: phy0: Enable LNA combining
[ 11.152524] ath: EEPROM regdomain: 0x6c
[ 11.152524] ath: EEPROM indicates we should expect a direct regpair map
[ 11.152526] ath: Country alpha2 being used: 00
[ 11.152526] ath: Regpair used: 0x6c
[ 11.270035] intel_rapl: domain uncore energy ctr 2742:2742 not working, skip
[ 11.375408] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.375757] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90011000000, irq=19
[ 11.440029] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 11.440136] acer_wmi: Function bitmap for Communication Button: 0x801
[ 11.440259] acer_wmi: Disabling ACPI video driver
[ 11.461584] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
[ 11.461654] input: Acer WMI hotkeys as /devices/virtual/input/input7
[ 11.462015] input: Acer BMA150 accelerometer as /devices/virtual/input/input8
[ 11.946670] Bluetooth: Core ver 2.17
[ 11.946688] NET: Registered protocol family 31
[ 11.946688] Bluetooth: HCI device and connection manager initialized
[ 11.946694] Bluetooth: HCI socket layer initialized
[ 11.946696] Bluetooth: L2CAP socket layer initialized
[ 11.946699] Bluetooth: SCO socket layer initialized
[ 12.036193] usbcore: registered new interface driver btusb
[ 12.520283] Linux video capture interface: v2.00
[ 12.549953] usbcore: registered new interface driver ath3k
[ 12.550003] usb 2-5: USB disconnect, device number 2
[ 12.612157] Console: switching to colour frame buffer device 170x48
[ 12.614696] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 12.614698] i915 0000:00:02.0: registered panic notifier
[ 12.629195] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.629265] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 12.629453] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 12.629737] HDA driver get symbol successfully from i915 module
[ 12.629873] snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
[ 12.636140] snd_hda_intel 0000:00:03.0: irq 65 for MSI/MSI-X
[ 12.763883] cfg80211: World regulatory domain updated:
[ 12.763886] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.763888] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.763890] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.763892] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.763894] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.763896] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.782894] SKU: Nid=0x1d sku_cfg=0x40e00001
[ 12.782897] SKU: port_connectivity=0x1
[ 12.782898] SKU: enable_pcbeep=0x0
[ 12.782900] SKU: check_sum=0x00000000
[ 12.782901] SKU: customization=0x00000000
[ 12.782903] SKU: external_amp=0x0
[ 12.782904] SKU: platform_type=0x0
[ 12.782905] SKU: swap=0x0
[ 12.782906] SKU: override=0x1
[ 12.783075] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.783078] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.783079] hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 12.783081] mono: mono_out=0x0
[ 12.783082] inputs:
[ 12.783083] Mic=0x12
[ 12.783085] realtek: No valid SSID, checking pincfg 0x40e00001 for NID 0x1d
[ 12.783087] realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0283
[ 12.784250] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 12.784323] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 12.784389] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 12.820304] usb 2-5: new full-speed USB device number 4 using xhci_hcd
[ 12.836386] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 12.843480] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 12.970021] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 13.344212] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b452)
[ 13.345387] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input14
[ 13.345465] usbcore: registered new interface driver uvcvideo
[ 13.345468] USB Video Class driver (1.1.1)
[ 15.234378] init: failsafe main process (679) killed by TERM signal
[ 17.824310] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[ 17.824339] ------------[ cut here ]------------
[ 17.824348] WARNING: CPU: 0 PID: 0 at /build/buildd/linux-3.13.0/drivers/usb/host/xhci-ring.c:1581 handle_cmd_completion+0xe36/0xe40()
[ 17.824350] Modules linked in: binfmt_misc nls_iso8859_1 uvcvideo videobuf2_vmalloc snd_hda_codec_hdmi snd_hda_codec_realtek videobuf2_memops videobuf2_core videodev ath3k btusb bluetooth snd_hda_intel snd_hda_codec acer_wmi snd_hwdep sparse_keymap arc4 snd_pcm ath9k snd_page_alloc intel_rapl snd_seq_midi ath9k_common snd_seq_midi_event x86_pkg_temp_thermal ath9k_hw intel_powerclamp ath snd_rawmidi coretemp mac80211 kvm_intel snd_seq cfg80211 kvm crct10dif_pclmul snd_seq_device snd_timer i915 crc32_pclmul ghash_clmulni_intel aesni_intel mei_me aes_x86_64 snd drm_kms_helper lrw gf128mul drm mei glue_helper i2c_algo_bit joydev serio_raw ablk_helper cryptd soundcore shpchp wmi lpc_ich video i2c_designware_platform i2c_designware_core mac_hid parport_pc ppdev lp parport psmouse ahci r8169 libahci mii
[ 17.824400] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-49-generic #81-Ubuntu
[ 17.824401] Hardware name: Acer Aspire E5-471/EA40_HB, BIOS V1.07 05/28/2014
[ 17.824403] 0000000000000009 ffff88025f203da8 ffffffff81721b36 0000000000000000
[ 17.824406] ffff88025f203de0 ffffffff810677dd ffff88024f476740 ffff88024f4760c0
[ 17.824409] 0000000000000003 000000024f4760c0 ffff88025373e000 ffff88025f203df0
[ 17.824412] Call Trace:
[ 17.824414] <IRQ> [<ffffffff81721b36>] dump_stack+0x45/0x56
[ 17.824423] [<ffffffff810677dd>] warn_slowpath_common+0x7d/0xa0
[ 17.824426] [<ffffffff810678ba>] warn_slowpath_null+0x1a/0x20
[ 17.824429] [<ffffffff8157e7a6>] handle_cmd_completion+0xe36/0xe40
[ 17.824432] [<ffffffff81580083>] xhci_irq+0x333/0xa60
[ 17.824437] [<ffffffff814dba50>] ? scsi_finish_command+0xb0/0x110
[ 17.824440] [<ffffffff815807c1>] xhci_msi_irq+0x11/0x20
[ 17.824444] [<ffffffff810bfb4e>] handle_irq_event_percpu+0x3e/0x1d0
[ 17.824446] [<ffffffff810bfd1d>] handle_irq_event+0x3d/0x60
[ 17.824449] [<ffffffff810c27a7>] handle_edge_irq+0x77/0x130
[ 17.824454] [<ffffffff81015e5e>] handle_irq+0x1e/0x30
[ 17.824459] [<ffffffff8173495d>] do_IRQ+0x4d/0xc0
[ 17.824462] [<ffffffff8172a02d>] common_interrupt+0x6d/0x6d
[ 17.824464] <EOI> [<ffffffff815d4362>] ? cpuidle_enter_state+0x52/0xc0
[ 17.824471] [<ffffffff815d4489>] cpuidle_idle_call+0xb9/0x1f0
[ 17.824474] [<ffffffff8101d35e>] arch_cpu_idle+0xe/0x30
[ 17.824477] [<ffffffff810befa5>] cpu_startup_entry+0xc5/0x290
[ 17.824481] [<ffffffff81710037>] rest_init+0x77/0x80
[ 17.824485] [<ffffffff81d35f70>] start_kernel+0x438/0x443
[ 17.824488] [<ffffffff81d35941>] ? repair_env_string+0x5c/0x5c
[ 17.824491] [<ffffffff81d35120>] ? early_idt_handlers+0x120/0x120
[ 17.824493] [<ffffffff81d355ee>] x86_64_start_reservations+0x2a/0x2c
[ 17.824496] [<ffffffff81d35733>] x86_64_start_kernel+0x143/0x152
[ 17.824498] ---[ end trace fa0924e339ea6c9a ]---
[ 18.028635] usb 2-5: Device not responding to set address.
[ 18.232657] usb 2-5: device not accepting address 4, error -71
[ 18.344797] usb 2-5: new full-speed USB device number 5 using xhci_hcd
[ 18.366015] usb 2-5: New USB device found, idVendor=0489, idProduct=e078
[ 18.366019] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 18.468837] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command.
[ 18.468841] xhci_hcd 0000:00:14.0: Assuming host is dying, halting host.
[ 18.468853] Bluetooth: hci0 urb ffff880252fdacc0 failed to resubmit (22)
[ 18.468891] Bluetooth: hci0 urb ffff880252fdaf00 failed to resubmit (22)
[ 18.468927] Bluetooth: hci0 urb ffff88024f770e40 failed to resubmit (22)
[ 18.468964] xhci_hcd 0000:00:14.0: HC died; cleaning up
[ 18.469022] usb 2-5: USB disconnect, device number 5
[ 18.469476] usb 2-7: USB disconnect, device number 3
[ 20.078794] init: cups main process (905) killed by HUP signal
[ 20.078802] init: cups main process ended, respawning
[ 21.349198] Bluetooth: RFCOMM TTY layer initialized
[ 21.349206] Bluetooth: RFCOMM socket layer initialized
[ 21.349210] Bluetooth: RFCOMM ver 1.11
[ 21.376752] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.376755] Bluetooth: BNEP filters: protocol multicast
[ 21.376766] Bluetooth: BNEP socket layer initializedHors ligne