#1 Le 24/04/2015, à 22:07
- Eiracca
[disque dur HS] Temps de boot anormalement long
Bonjour à tous,
J'ai ouvert un fil de discussion sur le forum il y a déjà 3 semaines à cause d'un problème de disque dur à priori.
Après un gros travail sur le disque, il s'avère qu'il y aurait aussi un problème de boot. (le démarrage dure plus d'1/4 d'heure)
Dans l'ordre antéchronologique voici le dernier dmesg:
accarie@MiniPCldlc:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-49-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #83-Ubuntu SMP Fri Apr 10 20:14:51 UTC 2015 (Ubuntu 3.13.0-49.83-generic 3.13.11-ckt17)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a7a1bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a7a1c000-0x00000000a7a70fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a7a71000-0x00000000a7cb7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a7cb8000-0x00000000a7cc8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a7cc9000-0x00000000a7cdbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a7cdc000-0x00000000a7cddfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a7cde000-0x00000000a7cdefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a7cdf000-0x00000000a7ce4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a7ce5000-0x00000000a7d48fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a7d49000-0x00000000a7d8bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a7d8c000-0x00000000a7efffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/E35M1-I DELUXE, BIOS 1202 04/13/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0A7F00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 0A8000000 mask FF8000000 uncachable
[ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000013f000000 aka 5104M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 2687MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2688MB, range: 128MB, type UC
[ 0.000000] reg 3, base: 2816MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3GB, range: 1GB, type UC
[ 0.000000] total RAM covered: 2687M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 2560MB, range: 128MB, type WB
[ 0.000000] reg 3, base: 2687MB, range: 1MB, type UC
[ 0.000000] e820: update [mem 0xa7f00000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000fcd90-0x000fcd9f] mapped at [c00fcd90]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[ 0.000000] [mem 0x34000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01b99000, 0x01b99fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35c22000-0x36e08fff]
[ 0.000000] ACPI: RSDP 000f0430 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT a7a66068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP a7a6c4d0 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
[ 0.000000] ACPI: DSDT a7a66150 00637C (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS a7cdff80 000040
[ 0.000000] ACPI: APIC a7a6c5c8 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG a7a6c630 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET a7a6c670 000038 (v01 ALASKA A M I 01072009 AMI 00000004)
[ 0.000000] ACPI: SSDT a7a6c6a8 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT a7a6ca88 0012FA (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4212MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01b9a000, 0x01b9afff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x3effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xa7a1bfff]
[ 0.000000] node 0: [mem 0xa7d8c000-0xa7efffff]
[ 0.000000] node 0: [mem 0x00001000-0x3effffff]
[ 0.000000] On node 0 totalpages: 944940
[ 0.000000] free_area_init_node: node 0, pgdat c199f740, node_mem_map f3442020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8425 pages used for memmap
[ 0.000000] HighMem zone: 716689 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0xa7f00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bcf000 s36160 r0 d21184 u57344
[ 0.000000] pcpu-alloc: s36160 r0 d21184 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 943156
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-49-generic root=UUID=f624bd9a-a0f6-4a33-8469-63f76cca5388 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10452984 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0013f000)
[ 0.000000] Memory: 3697444K/3779760K available (6551K kernel code, 641K rwdata, 2768K rodata, 880K init, 924K bss, 82316K reserved, 2866756K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc19bd000 - 0xc1a99000 ( 880 kB)
[ 0.000000] .data : 0xc1665f74 - 0xc19bc5c0 (3417 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1665f74 (6551 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f3008000 soft=f300a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1600.084 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.16 BogoMIPS (lpj=6400336)
[ 0.000010] pid_max: default: 32768 minimum: 301
[ 0.000065] Security Framework initialized
[ 0.000095] AppArmor: AppArmor initialized
[ 0.000099] Yama: becoming mindful.
[ 0.000184] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000189] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000549] Initializing cgroup subsys memory
[ 0.000563] Initializing cgroup subsys devices
[ 0.000567] Initializing cgroup subsys freezer
[ 0.000571] Initializing cgroup subsys blkio
[ 0.000575] Initializing cgroup subsys perf_event
[ 0.000580] Initializing cgroup subsys hugetlb
[ 0.000626] CPU: Physical Processor ID: 0
[ 0.000629] CPU: Processor Core ID: 0
[ 0.000635] mce: CPU supports 6 MCE banks
[ 0.000659] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.000659] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.000659] tlb_flushall_shift: 5
[ 0.001389] Freeing SMP alternatives memory: 32K (c1a99000 - c1aa1000)
[ 0.003943] ACPI: Core revision 20131115
[ 0.010778] ACPI: All ACPI Tables successfully acquired
[ 0.028170] ftrace: allocating 27857 entries in 55 pages
[ 0.053650] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.054022] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.093716] smpboot: CPU0: AMD E-350 Processor (fam: 14, model: 01, stepping: 00)
[ 0.199159] Performance Events: AMD PMU driver.
[ 0.199169] ... version: 0
[ 0.199171] ... bit width: 48
[ 0.199174] ... generic registers: 4
[ 0.199177] ... value mask: 0000ffffffffffff
[ 0.199180] ... max period: 00007fffffffffff
[ 0.199182] ... fixed-purpose events: 0
[ 0.199185] ... event mask: 000000000000000f
[ 0.202450] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.202649] CPU 1 irqstacks, hard=f30ec000 soft=f30ee000
[ 0.202653] x86: Booting SMP configuration:
[ 0.212629] Initializing CPU#1
[ 0.202656] .... node #0, CPUs: #1
[ 0.215756] x86: Booted up 1 node, 2 CPUs
[ 0.215762] smpboot: Total of 2 processors activated (6400.33 BogoMIPS)
[ 0.216878] devtmpfs: initialized
[ 0.217229] EVM: security.selinux
[ 0.217232] EVM: security.SMACK64
[ 0.217235] EVM: security.ima
[ 0.217238] EVM: security.capability
[ 0.217425] PM: Registering ACPI NVS region [mem 0xa7a1c000-0xa7a70fff] (348160 bytes)
[ 0.217441] PM: Registering ACPI NVS region [mem 0xa7cb8000-0xa7cc8fff] (69632 bytes)
[ 0.217446] PM: Registering ACPI NVS region [mem 0xa7cdc000-0xa7cddfff] (8192 bytes)
[ 0.217449] PM: Registering ACPI NVS region [mem 0xa7cdf000-0xa7ce4fff] (24576 bytes)
[ 0.217453] PM: Registering ACPI NVS region [mem 0xa7d49000-0xa7d8bfff] (274432 bytes)
[ 0.219500] pinctrl core: initialized pinctrl subsystem
[ 0.219655] regulator-dummy: no parameters
[ 0.219698] RTC time: 17:29:21, date: 04/24/15
[ 0.219800] NET: Registered protocol family 16
[ 0.220040] EISA bus registered
[ 0.220045] cpuidle: using governor ladder
[ 0.220048] cpuidle: using governor menu
[ 0.220253] ACPI: bus type PCI registered
[ 0.220258] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.220382] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.220388] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.220391] PCI: Using MMCONFIG for extended config space
[ 0.220394] PCI: Using configuration type 1 for base access
[ 0.222551] bio: create slab <bio-0> at 0
[ 0.223420] ACPI: Added _OSI(Module Device)
[ 0.223428] ACPI: Added _OSI(Processor Device)
[ 0.223432] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.223435] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.227447] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.244069] ACPI: Interpreter enabled
[ 0.244093] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.244103] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.244131] ACPI: (supports S0 S3 S4 S5)
[ 0.244135] ACPI: Using IOAPIC for interrupt routing
[ 0.244410] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.244671] ACPI: No dock devices found.
[ 0.375434] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.375449] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.375460] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.375860] acpi PNP0A03:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce1ff])
[ 0.376202] PCI host bridge to bus 0000:00
[ 0.376210] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.376214] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.376219] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.376224] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.376228] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.376244] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.376414] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[ 0.376432] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.376443] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
[ 0.376454] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.376477] pci 0000:00:01.0: reg 0x24: [mem 0xfe700000-0xfe7fffff]
[ 0.376524] pci 0000:00:01.0: supports D1 D2
[ 0.376649] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.376664] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[ 0.376741] pci 0000:00:01.1: supports D1 D2
[ 0.376871] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[ 0.376954] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.377043] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.377129] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.377158] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
[ 0.377173] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
[ 0.377187] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
[ 0.377202] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
[ 0.377216] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
[ 0.377231] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4f000-0xfeb4f3ff]
[ 0.377261] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.377432] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.377454] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4e000-0xfeb4efff]
[ 0.377604] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.377670] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.377698] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4d000-0xfeb4d0ff]
[ 0.377812] pci 0000:00:12.2: supports D1 D2
[ 0.377816] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.377900] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.377967] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.377988] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4c000-0xfeb4cfff]
[ 0.378137] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.378206] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.378234] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4b000-0xfeb4b0ff]
[ 0.378347] pci 0000:00:13.2: supports D1 D2
[ 0.378351] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.378435] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.378500] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.378715] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.378737] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
[ 0.378751] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
[ 0.378766] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
[ 0.378781] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
[ 0.378795] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
[ 0.378948] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.378980] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.379071] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.379161] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.379219] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.379427] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.379548] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.379602] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.379623] pci 0000:00:14.5: reg 0x10: [mem 0xfeb4a000-0xfeb4afff]
[ 0.379771] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.379839] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.379949] pci 0000:00:15.0: supports D1 D2
[ 0.380040] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.380105] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.380214] pci 0000:00:15.1: supports D1 D2
[ 0.380303] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.380365] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[ 0.380474] pci 0000:00:15.2: supports D1 D2
[ 0.380562] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.380627] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
[ 0.380736] pci 0000:00:15.3: supports D1 D2
[ 0.380824] pci 0000:00:15.3: System wakeup disabled by ACPI
[ 0.380890] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.380911] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
[ 0.381059] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.381124] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.381152] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
[ 0.381265] pci 0000:00:16.2: supports D1 D2
[ 0.381269] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.381353] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.381421] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.381569] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.381713] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.381856] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.382015] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.382156] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.382300] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.382440] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.382666] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.382785] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.382799] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.382803] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.382808] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.382812] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.382929] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[ 0.382964] pci 0000:03:00.0: reg 0x10: [mem 0xfea00000-0xfea0ffff 64bit]
[ 0.383109] pci 0000:03:00.0: supports D1
[ 0.383113] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.391381] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.391408] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.391617] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.391649] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.391691] pci 0000:04:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.391718] pci 0000:04:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.391828] pci 0000:04:00.0: supports D1 D2
[ 0.391833] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.391893] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.399384] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.399407] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.399421] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.399590] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.399630] pci 0000:05:00.0: reg 0x10: [mem 0xfe900000-0xfe901fff 64bit]
[ 0.399785] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.407384] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.407411] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.407585] pci 0000:06:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.407625] pci 0000:06:00.0: reg 0x10: [mem 0xfe800000-0xfe801fff 64bit]
[ 0.407782] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.415383] pci 0000:00:15.3: PCI bridge to [bus 06]
[ 0.415410] pci 0000:00:15.3: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.415475] pci_bus 0000:00: on NUMA node 0
[ 0.463626] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.463769] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.463904] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.464036] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.464146] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.464237] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.464328] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.464418] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.464730] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.464833] Found 1 acpi root devices
[ 0.465246] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.465256] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.465272] vgaarb: loaded
[ 0.465275] vgaarb: bridge control possible 0000:00:01.0
[ 0.465697] SCSI subsystem initialized
[ 0.465884] libata version 3.00 loaded.
[ 0.465949] ACPI: bus type USB registered
[ 0.465995] usbcore: registered new interface driver usbfs
[ 0.466013] usbcore: registered new interface driver hub
[ 0.466288] usbcore: registered new device driver usb
[ 0.466703] PCI: Using ACPI for IRQ routing
[ 0.477682] PCI: pci_cache_line_size set to 64 bytes
[ 0.477809] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.477814] e820: reserve RAM buffer [mem 0xa7a1c000-0xa7ffffff]
[ 0.477819] e820: reserve RAM buffer [mem 0xa7f00000-0xa7ffffff]
[ 0.477823] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[ 0.478012] NetLabel: Initializing
[ 0.478016] NetLabel: domain hash size = 128
[ 0.478018] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.478043] NetLabel: unlabeled traffic allowed by default
[ 0.478386] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.478400] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.480533] Switched to clocksource hpet
[ 0.491210] AppArmor: AppArmor Filesystem Enabled
[ 0.491284] pnp: PnP ACPI init
[ 0.491314] ACPI: bus type PNP registered
[ 0.491577] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.491586] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.492115] system 00:01: [io 0x040b] has been reserved
[ 0.492121] system 00:01: [io 0x04d6] has been reserved
[ 0.492126] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.492131] system 00:01: [io 0x0c14] has been reserved
[ 0.492136] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.492141] system 00:01: [io 0x0c52] has been reserved
[ 0.492146] system 00:01: [io 0x0c6c] has been reserved
[ 0.492150] system 00:01: [io 0x0c6f] has been reserved
[ 0.492155] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.492160] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.492165] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.492170] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.492175] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.492180] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.492185] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.492190] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.492195] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.492200] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.492206] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.492211] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.492217] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.492222] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.492230] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.492235] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.492241] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.492247] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.492521] system 00:02: [io 0x0300-0x031f] has been reserved
[ 0.492564] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.492569] system 00:02: [io 0x0230-0x023f] has been reserved
[ 0.492575] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.492602] pnp 00:03: [dma 4]
[ 0.492639] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.492710] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.492756] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.492875] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.492882] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.492936] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.493016] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.493489] pnp 00:09: [dma 0 disabled]
[ 0.493595] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.673099] system 00:0a: [mem 0xa8000000-0xbfffffff] has been reserved
[ 0.673113] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.673403] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.673416] pnp: PnP ACPI: found 12 devices
[ 0.673420] ACPI: bus type PNP unregistered
[ 0.673426] PnPBIOS: Disabled by ACPI PNP
[ 0.717014] pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.717029] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.717035] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.717091] pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.717096] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.717101] pci 0000:00:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.717112] pci 0000:00:04.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
[ 0.717119] pci 0000:00:04.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.717127] pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.717133] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.717139] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.717146] pci 0000:00:04.0: bridge window [mem 0xd0100000-0xd02fffff]
[ 0.717153] pci 0000:00:04.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.717162] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.717180] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.717189] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.717201] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.717207] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.717218] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.717228] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.717236] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.717249] pci 0000:00:15.3: PCI bridge to [bus 06]
[ 0.717257] pci 0000:00:15.3: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.717271] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.717276] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.717280] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.717285] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.717289] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.717293] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
[ 0.717298] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.717303] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.717307] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.717311] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.717315] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.717320] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.717324] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.717329] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.717333] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.717338] pci_bus 0000:06: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.717408] NET: Registered protocol family 2
[ 0.717806] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.717836] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.717873] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.717916] TCP: reno registered
[ 0.717922] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.717933] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.718031] NET: Registered protocol family 1
[ 0.718056] pci 0000:00:01.0: Video device with shadowed ROM
[ 1.769596] PCI: CLS 64 bytes, default 64
[ 1.769709] Trying to unpack rootfs image as initramfs...
[ 2.421106] Freeing initrd memory: 18332K (f5c22000 - f6e09000)
[ 2.421375] LVT offset 0 assigned for vector 0x400
[ 2.421452] perf: AMD IBS detected (0x000000ff)
[ 2.421597] microcode: CPU0: patch_level=0x05000026
[ 2.421611] microcode: CPU1: patch_level=0x05000026
[ 2.421921] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.421931] Scanning for low memory corruption every 60 seconds
[ 2.422556] Initialise system trusted keyring
[ 2.422657] audit: initializing netlink socket (disabled)
[ 2.422681] type=2000 audit(1429896563.292:1): initialized
[ 2.465635] bounce pool size: 64 pages
[ 2.465660] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.468587] zbud: loaded
[ 2.469003] VFS: Disk quotas dquot_6.5.2
[ 2.469116] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.470344] fuse init (API version 7.22)
[ 2.470734] msgmni has been set to 1658
[ 2.470875] Key type big_key registered
[ 2.472765] Key type asymmetric registered
[ 2.472776] Asymmetric key parser 'x509' registered
[ 2.472885] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.472998] io scheduler noop registered
[ 2.473002] io scheduler deadline registered (default)
[ 2.473054] io scheduler cfq registered
[ 2.473918] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.473948] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.474037] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 2.474040] vesafb: scrolling: redraw
[ 2.474045] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 2.474744] vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 5824k, total 5824k
[ 2.596790] Console: switching to colour frame buffer device 175x65
[ 2.717481] fb0: VESA VGA frame buffer device
[ 2.717534] ipmi message handler version 39.2
[ 2.717685] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.717695] ACPI: Power Button [PWRB]
[ 2.717767] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.717772] ACPI: Power Button [PWRF]
[ 2.717865] ACPI: acpi_idle registered with cpuidle
[ 2.718264] GHES: HEST is not enabled!
[ 2.718435] isapnp: Scanning for PnP cards...
[ 2.718539] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.739128] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.741499] Linux agpgart interface v0.103
[ 2.744147] brd: module loaded
[ 2.745549] loop: module loaded
[ 2.746324] libphy: Fixed MDIO Bus: probed
[ 2.746500] tun: Universal TUN/TAP device driver, 1.6
[ 2.746503] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.746578] PPP generic driver version 2.4.2
[ 2.746645] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.746654] ehci-pci: EHCI PCI platform driver
[ 2.746847] QUIRK: Enable AMD PLL fix
[ 2.746898] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.746914] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.746923] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.746939] ehci-pci 0000:00:12.2: debug port 1
[ 2.747012] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4d000
[ 2.756549] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.756694] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.756699] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.756704] usb usb1: Product: EHCI Host Controller
[ 2.756708] usb usb1: Manufacturer: Linux 3.13.0-49-generic ehci_hcd
[ 2.756712] usb usb1: SerialNumber: 0000:00:12.2
[ 2.756955] hub 1-0:1.0: USB hub found
[ 2.756971] hub 1-0:1.0: 5 ports detected
[ 2.757561] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.757573] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.757581] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.757598] ehci-pci 0000:00:13.2: debug port 1
[ 2.757654] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4b000
[ 2.768560] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.768711] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.768717] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.768722] usb usb2: Product: EHCI Host Controller
[ 2.768726] usb usb2: Manufacturer: Linux 3.13.0-49-generic ehci_hcd
[ 2.768730] usb usb2: SerialNumber: 0000:00:13.2
[ 2.768984] hub 2-0:1.0: USB hub found
[ 2.768999] hub 2-0:1.0: 5 ports detected
[ 2.769598] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 2.769609] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.769618] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.769634] ehci-pci 0000:00:16.2: debug port 1
[ 2.769690] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
[ 2.780550] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.780695] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.780700] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.780704] usb usb3: Product: EHCI Host Controller
[ 2.780709] usb usb3: Manufacturer: Linux 3.13.0-49-generic ehci_hcd
[ 2.780713] usb usb3: SerialNumber: 0000:00:16.2
[ 2.780961] hub 3-0:1.0: USB hub found
[ 2.780977] hub 3-0:1.0: 4 ports detected
[ 2.781349] ehci-platform: EHCI generic platform driver
[ 2.781370] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.781374] ohci-pci: OHCI PCI platform driver
[ 2.781575] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.781587] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 2.781633] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4e000
[ 2.840626] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.840636] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.840641] usb usb4: Product: OHCI PCI host controller
[ 2.840645] usb usb4: Manufacturer: Linux 3.13.0-49-generic ohci_hcd
[ 2.840650] usb usb4: SerialNumber: 0000:00:12.0
[ 2.840907] hub 4-0:1.0: USB hub found
[ 2.840925] hub 4-0:1.0: 5 ports detected
[ 2.841493] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.841505] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.841535] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4c000
[ 2.900626] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.900636] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.900641] usb usb5: Product: OHCI PCI host controller
[ 2.900645] usb usb5: Manufacturer: Linux 3.13.0-49-generic ohci_hcd
[ 2.900649] usb usb5: SerialNumber: 0000:00:13.0
[ 2.900911] hub 5-0:1.0: USB hub found
[ 2.900933] hub 5-0:1.0: 5 ports detected
[ 2.901503] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 2.901516] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 2.901545] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb4a000
[ 2.960711] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.960720] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.960725] usb usb6: Product: OHCI PCI host controller
[ 2.960730] usb usb6: Manufacturer: Linux 3.13.0-49-generic ohci_hcd
[ 2.960734] usb usb6: SerialNumber: 0000:00:14.5
[ 2.960968] hub 6-0:1.0: USB hub found
[ 2.960986] hub 6-0:1.0: 2 ports detected
[ 2.961335] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.961347] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.961376] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
[ 3.020635] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.020645] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.020650] usb usb7: Product: OHCI PCI host controller
[ 3.020654] usb usb7: Manufacturer: Linux 3.13.0-49-generic ohci_hcd
[ 3.020658] usb usb7: SerialNumber: 0000:00:16.0
[ 3.020920] hub 7-0:1.0: USB hub found
[ 3.020938] hub 7-0:1.0: 4 ports detected
[ 3.021292] ohci-platform: OHCI generic platform driver
[ 3.021314] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.021498] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 3.021510] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 8
[ 3.021734] xhci_hcd 0000:05:00.0: irq 40 for MSI/MSI-X
[ 3.021748] xhci_hcd 0000:05:00.0: irq 41 for MSI/MSI-X
[ 3.021762] xhci_hcd 0000:05:00.0: irq 42 for MSI/MSI-X
[ 3.021933] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.021938] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.021942] usb usb8: Product: xHCI Host Controller
[ 3.021946] usb usb8: Manufacturer: Linux 3.13.0-49-generic xhci_hcd
[ 3.021950] usb usb8: SerialNumber: 0000:05:00.0
[ 3.022115] hub 8-0:1.0: USB hub found
[ 3.022132] hub 8-0:1.0: 2 ports detected
[ 3.022275] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 3.022282] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[ 3.025077] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.025082] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.025086] usb usb9: Product: xHCI Host Controller
[ 3.025090] usb usb9: Manufacturer: Linux 3.13.0-49-generic xhci_hcd
[ 3.025094] usb usb9: SerialNumber: 0000:05:00.0
[ 3.025256] hub 9-0:1.0: USB hub found
[ 3.025277] hub 9-0:1.0: 2 ports detected
[ 3.029270] isapnp: No Plug & Play device found
[ 3.044936] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 3.044955] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 10
[ 3.045172] xhci_hcd 0000:06:00.0: irq 43 for MSI/MSI-X
[ 3.045187] xhci_hcd 0000:06:00.0: irq 44 for MSI/MSI-X
[ 3.045201] xhci_hcd 0000:06:00.0: irq 45 for MSI/MSI-X
[ 3.045397] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.045402] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.045407] usb usb10: Product: xHCI Host Controller
[ 3.045411] usb usb10: Manufacturer: Linux 3.13.0-49-generic xhci_hcd
[ 3.045415] usb usb10: SerialNumber: 0000:06:00.0
[ 3.045839] hub 10-0:1.0: USB hub found
[ 3.045862] hub 10-0:1.0: 2 ports detected
[ 3.046021] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 3.046030] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 11
[ 3.048529] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.048534] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.048538] usb usb11: Product: xHCI Host Controller
[ 3.048542] usb usb11: Manufacturer: Linux 3.13.0-49-generic xhci_hcd
[ 3.048546] usb usb11: SerialNumber: 0000:06:00.0
[ 3.048937] hub 11-0:1.0: USB hub found
[ 3.048967] hub 11-0:1.0: 2 ports detected
[ 3.072897] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.073393] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.073407] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.073972] mousedev: PS/2 mouse device common for all mice
[ 3.074822] rtc_cmos 00:04: RTC can wake from S4
[ 3.075176] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 3.075222] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.075386] device-mapper: uevent: version 1.0.3
[ 3.075654] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 3.075719] platform eisa.0: Probing EISA bus 0
[ 3.075725] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 3.075730] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 3.075735] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 3.075739] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 3.075743] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 3.075747] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 3.075751] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 3.075755] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 3.075758] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 3.075762] platform eisa.0: EISA: Detected 0 cards
[ 3.075779] cpufreq-nforce2: No nForce2 chipset.
[ 3.075786] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.076045] TCP: cubic registered
[ 3.076222] NET: Registered protocol family 10
[ 3.076606] NET: Registered protocol family 17
[ 3.076626] Key type dns_resolver registered
[ 3.077085] Using IPI No-Shortcut mode
[ 3.077835] Loading compiled-in X.509 certificates
[ 3.084045] Loaded X.509 cert 'Magrathea: Glacier signing key: 84c09e2e78ff91ba4296f5f5425fbdbb4ab05abe'
[ 3.084072] registered taskstats version 1
[ 3.090174] Key type trusted registered
[ 3.101027] Key type encrypted registered
[ 3.101044] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.101049] IMA: No TPM chip found, activating TPM-bypass!
[ 3.101644] regulator-dummy: disabling
[ 3.101963] Magic number: 11:520:492
[ 3.102060] xhci_hcd 0000:06:00.0: hash matches
[ 3.102182] rtc_cmos 00:04: setting system clock to 2015-04-24 17:29:24 UTC (1429896564)
[ 3.102482] acpi-cpufreq: overriding BIOS provided _PSD data
[ 3.102645] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.102648] EDD information not available.
[ 3.102746] PM: Hibernation image not present or could not be loaded.
[ 3.103467] Freeing unused kernel memory: 880K (c19bd000 - c1a99000)
[ 3.103558] Write protecting the kernel text: 6552k
[ 3.103729] Write protecting the kernel read-only data: 2776k
[ 3.103732] NX-protecting the kernel data: 5736k
[ 3.137419] systemd-udevd[97]: starting version 204
[ 3.202769] ahci 0000:00:11.0: version 3.0
[ 3.203105] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 3.203114] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 3.204335] scsi0 : ahci
[ 3.204558] scsi1 : ahci
[ 3.204681] scsi2 : ahci
[ 3.204808] scsi3 : ahci
[ 3.204901] ata1: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f100 irq 19
[ 3.204907] ata2: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f180 irq 19
[ 3.204912] ata3: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f200 irq 19
[ 3.204917] ata4: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f280 irq 19
[ 3.247087] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.247113] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.247402] r8169 0000:04:00.0: irq 46 for MSI/MSI-X
[ 3.247713] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0xf843a000, f4:6d:04:6d:e7:e9, XID 0c200000 IRQ 46
[ 3.247719] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.248549] scsi4 : pata_atiixp
[ 3.252342] scsi5 : pata_atiixp
[ 3.252506] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[ 3.252511] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[ 3.431286] tsc: Refined TSC clocksource calibration: 1599.936 MHz
[ 3.524699] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.524795] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.696687] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.696738] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.697583] ata3.00: ATAPI: TSSTcorp CDDVDW SN-S083F, SB01, max UDMA/100
[ 3.700371] ata1.00: ATA-8: WDC WD3200BEVT-00A0RT0, 01.01A01, max UDMA/133
[ 3.700381] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.703063] ata3.00: configured for UDMA/100
[ 3.703579] ata1.00: configured for UDMA/133
[ 3.704146] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-0 01.0 PQ: 0 ANSI: 5
[ 3.704613] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.704720] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.704907] sd 0:0:0:0: [sda] Write Protect is off
[ 3.704914] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.705187] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.710913] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-S083F SB01 PQ: 0 ANSI: 5
[ 3.720155] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.720164] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.720465] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.720586] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 3.724716] usb 5-5: new low-speed USB device number 2 using ohci-pci
[ 3.764017] sda: sda1 sda2 < sda5 >
[ 3.765349] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.892721] usb 5-5: New USB device found, idVendor=045e, idProduct=00d2
[ 3.892731] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.892736] usb 5-5: Product: Microsoft Notebook Optical Mouse with Tilt Wheel
[ 3.892740] usb 5-5: Manufacturer: Microsoft
[ 3.913095] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.931609] usbcore: registered new interface driver usbhid
[ 3.931617] usbhid: USB HID core driver
[ 3.940154] input: Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.0/input/input5
[ 3.940587] hid-generic 0003:045E:00D2.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel] on usb-0000:00:13.0-5/input0
[ 4.156683] usb 7-3: new full-speed USB device number 2 using ohci-pci
[ 4.317774] usb 7-3: New USB device found, idVendor=0cf3, idProduct=3000
[ 4.317783] usb 7-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.428980] Switched to clocksource tsc
[ 4.584672] usb 4-4: new low-speed USB device number 2 using ohci-pci
[ 4.757904] usb 4-4: New USB device found, idVendor=0a81, idProduct=0101
[ 4.757914] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.757919] usb 4-4: Product: USB Keyboard
[ 4.757923] usb 4-4: Manufacturer: CHESEN
[ 4.767590] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input6
[ 4.767803] hid-generic 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:12.0-4/input0
[ 4.778035] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/input/input7
[ 4.778229] hid-generic 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:12.0-4/input1
[ 11.309982] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 18.625663] random: nonblocking pool is initialized
[ 107.956183] Adding 3778556k swap on /dev/sda5. Priority:-1 extents:1 across:3778556k FS
[ 108.088493] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 108.351673] systemd-udevd[275]: starting version 204
[ 108.688759] wmi: Mapper loaded
[ 108.691453] lp: driver loaded but no devices found
[ 108.729167] ppdev: user-space parallel port driver
[ 108.887791] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 108.887933] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 108.957840] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 109.050880] [drm] Initialized drm 1.1.0 20060810
[ 109.186250] cfg80211: Calling CRDA to update world regulatory domain
[ 109.247562] type=1400 audit(1429896670.645:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=343 comm="apparmor_parser"
[ 109.247580] type=1400 audit(1429896670.645:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=343 comm="apparmor_parser"
[ 109.247590] type=1400 audit(1429896670.645:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=343 comm="apparmor_parser"
[ 109.254433] type=1400 audit(1429896670.653:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=343 comm="apparmor_parser"
[ 109.254450] type=1400 audit(1429896670.653:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=343 comm="apparmor_parser"
[ 109.254943] type=1400 audit(1429896670.653:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=343 comm="apparmor_parser"
[ 109.296836] Bluetooth: Core ver 2.17
[ 109.296882] NET: Registered protocol family 31
[ 109.296886] Bluetooth: HCI device and connection manager initialized
[ 109.296900] Bluetooth: HCI socket layer initialized
[ 109.296906] Bluetooth: L2CAP socket layer initialized
[ 109.296916] Bluetooth: SCO socket layer initialized
[ 109.518403] [drm] radeon kernel modesetting enabled.
[ 109.518478] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
[ 109.518482] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 109.518529] Console: switching to colour dummy device 80x25
[ 109.521385] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1043:0x84A5).
[ 109.521451] [drm] register mmio base: 0xFEB00000
[ 109.521454] [drm] register mmio size: 262144
[ 109.521600] ATOM BIOS: Ontario
[ 109.521674] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 109.521681] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[ 109.521685] [drm] Detected VRAM RAM=384M, BAR=256M
[ 109.521689] [drm] RAM width 32bits DDR
[ 109.524518] [TTM] Zone kernel: Available graphics memory: 424966 kiB
[ 109.524525] [TTM] Zone highmem: Available graphics memory: 1858344 kiB
[ 109.524528] [TTM] Initializing pool allocator
[ 109.524537] [TTM] Initializing DMA pool allocator
[ 109.524586] [drm] radeon: 384M of VRAM memory ready
[ 109.524590] [drm] radeon: 1024M of GTT memory ready.
[ 109.524627] [drm] Loading PALM Microcode
[ 109.569505] kvm: Nested Virtualization enabled
[ 109.569515] kvm: Nested Paging enabled
[ 109.641377] ath: phy0: Enable LNA combining
[ 109.655681] ath: EEPROM regdomain: 0x60
[ 109.655689] ath: EEPROM indicates we should expect a direct regpair map
[ 109.655694] ath: Country alpha2 being used: 00
[ 109.655697] ath: Regpair used: 0x60
[ 109.745588] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 109.746407] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf84c0000, irq=16
[ 110.036234] usb 7-3: USB disconnect, device number 2
[ 110.036594] usbcore: registered new interface driver ath3k
[ 110.127533] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 110.160011] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[ 110.160262] radeon 0000:00:01.0: WB enabled
[ 110.160271] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffceec00
[ 110.160277] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffceec0c
[ 110.161966] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8732118
[ 110.161972] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 110.161974] [drm] Driver supports precise vblank timestamp query.
[ 110.161978] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 110.162019] radeon 0000:00:01.0: irq 47 for MSI/MSI-X
[ 110.162045] radeon 0000:00:01.0: radeon: using MSI.
[ 110.162087] [drm] radeon: irq initialized.
[ 110.178793] [drm] ring test on 0 succeeded in 1 usecs
[ 110.178808] [drm] ring test on 3 succeeded in 2 usecs
[ 110.234454] [drm] ring test on 5 succeeded in 1 usecs
[ 110.254320] [drm] UVD initialized successfully.
[ 110.254543] [drm] Enabling audio 0 support
[ 110.254589] [drm] ib test on ring 0 succeeded in 0 usecs
[ 110.254626] [drm] ib test on ring 3 succeeded in 0 usecs
[ 110.275271] [drm] ib test on ring 5 succeeded
[ 110.295852] [drm] Radeon Display Connectors
[ 110.295857] [drm] Connector 0:
[ 110.295860] [drm] HDMI-A-1
[ 110.295863] [drm] HPD1
[ 110.295868] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 110.295870] [drm] Encoders:
[ 110.295873] [drm] DFP1: INTERNAL_UNIPHY
[ 110.295875] [drm] Connector 1:
[ 110.295878] [drm] DVI-D-1
[ 110.295880] [drm] HPD2
[ 110.295884] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 110.295886] [drm] Encoders:
[ 110.295888] [drm] DFP2: INTERNAL_UNIPHY
[ 110.295890] [drm] Connector 2:
[ 110.295893] [drm] VGA-1
[ 110.295897] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 110.295899] [drm] Encoders:
[ 110.295901] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 110.295960] [drm] Internal thermal controller without fan control
[ 110.296023] [drm] Found smc ucode version: 0x00010200
[ 110.296202] [drm] radeon: dpm initialized
[ 110.370167] [drm] fb mappable at 0xC0477000
[ 110.370174] [drm] vram apper at 0xC0000000
[ 110.370177] [drm] size 8294400
[ 110.370179] [drm] fb depth is 24
[ 110.370182] [drm] pitch is 7680
[ 110.370534] fbcon: radeondrmfb (fb0) is primary device
[ 110.408566] Console: switching to colour frame buffer device 240x67
[ 110.424243] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 110.424248] radeon 0000:00:01.0: registered panic notifier
[ 110.424263] [drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0
[ 110.424808] hda-intel 0000:00:01.1: Using LPIB position fix
[ 110.424905] snd_hda_intel 0000:00:01.1: irq 48 for MSI/MSI-X
[ 110.429808] hda-intel 0000:00:01.1: Enable sync_write for stable communication
[ 110.447553] HDMI ATI/AMD: no speaker allocation for ELD
[ 110.447829] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 110.448670] hda-intel 0000:00:14.2: Using LPIB position fix
[ 110.452370] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[ 110.476984] SKU: Nid=0x1d sku_cfg=0x4004c601
[ 110.476992] SKU: port_connectivity=0x1
[ 110.476995] SKU: enable_pcbeep=0x0
[ 110.476998] SKU: check_sum=0x00000004
[ 110.477001] SKU: customization=0x000000c6
[ 110.477003] SKU: external_amp=0x0
[ 110.477006] SKU: platform_type=0x0
[ 110.477008] SKU: swap=0x0
[ 110.477010] SKU: override=0x1
[ 110.477319] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 110.477323] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 110.477327] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 110.477329] mono: mono_out=0x0
[ 110.477332] dig-out=0x11/0x1e
[ 110.477334] inputs:
[ 110.477338] Front Mic=0x19
[ 110.477341] Rear Mic=0x18
[ 110.477344] Line=0x1a
[ 110.477347] realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
[ 110.477351] realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0892
[ 110.493127] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 110.493393] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 110.493606] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 110.493847] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 110.494064] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 110.992499] asus_wmi: ASUS WMI generic driver loaded
[ 111.001248] asus_wmi: Initialization: 0x0
[ 111.001311] asus_wmi: BIOS WMI version: 0.9
[ 111.001415] asus_wmi: SFUN value: 0x0
[ 111.002147] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input14
[ 111.025849] asus_wmi: Disabling ACPI video driver
[ 111.484402] usb 7-3: new full-speed USB device number 3 using ohci-pci
[ 111.645421] usb 7-3: New USB device found, idVendor=0cf3, idProduct=3005
[ 111.645431] usb 7-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 114.277711] usbcore: registered new interface driver btusb
[ 126.164742] cfg80211: World regulatory domain updated:
[ 126.164754] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 126.164758] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 126.164762] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 126.164766] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 126.164770] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 126.164773] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 137.042480] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 139.845050] init: failsafe main process (640) killed by TERM signal
[ 140.274647] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 140.274658] Bluetooth: BNEP filters: protocol multicast
[ 140.274676] Bluetooth: BNEP socket layer initialized
[ 140.311424] Bluetooth: RFCOMM TTY layer initialized
[ 140.311449] Bluetooth: RFCOMM socket layer initialized
[ 140.311468] Bluetooth: RFCOMM ver 1.11
[ 140.442544] type=1400 audit(1429896701.841:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=760 comm="apparmor_parser"
[ 140.442565] type=1400 audit(1429896701.841:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=760 comm="apparmor_parser"
[ 140.443548] type=1400 audit(1429896701.845:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=760 comm="apparmor_parser"
[ 140.902976] init: cups main process (761) killed by HUP signal
[ 140.903011] init: cups main process ended, respawning
[ 142.489140] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 142.734903] r8169 0000:04:00.0 eth0: link down
[ 142.734977] r8169 0000:04:00.0 eth0: link down
[ 142.735069] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 142.735840] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 143.581798] type=1400 audit(1429896704.981:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=861 comm="apparmor_parser"
[ 143.581821] type=1400 audit(1429896704.981:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=861 comm="apparmor_parser"
[ 143.581832] type=1400 audit(1429896704.981:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=861 comm="apparmor_parser"
[ 143.582784] type=1400 audit(1429896704.981:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=861 comm="apparmor_parser"
[ 143.582796] type=1400 audit(1429896704.981:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=861 comm="apparmor_parser"
[ 143.583167] type=1400 audit(1429896704.985:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=860 comm="apparmor_parser"
[ 143.583190] type=1400 audit(1429896704.985:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=860 comm="apparmor_parser"
[ 144.373336] r8169 0000:04:00.0 eth0: link up
[ 144.373387] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 145.781269] audit_printk_skb: 132 callbacks suppressed
[ 145.781279] type=1400 audit(1429896707.181:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1110 comm="apparmor_parser"
[ 145.917641] init: gdm main process (982) killed by TERM signal
[ 170.617049] type=1400 audit(1429896732.017:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1238 comm="apparmor_parser"
[ 170.617071] type=1400 audit(1429896732.017:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1238 comm="apparmor_parser"
[ 170.618081] type=1400 audit(1429896732.021:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1238 comm="apparmor_parser"
[ 505.419315] init: plymouth-upstart-bridge main process ended, respawning
[ 505.469432] init: plymouth-upstart-bridge main process ended, respawning
[ 2027.824040] init: cups main process (1239) killed by KILL signal
[ 2028.041395] type=1400 audit(1429898588.368:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3007 comm="apparmor_parser"
[ 2028.041418] type=1400 audit(1429898588.368:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3007 comm="apparmor_parser"
[ 2028.042357] type=1400 audit(1429898588.368:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3007 comm="apparmor_parser"
[ 6624.881408] perf samples too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
accarie@MiniPCldlc:~$ ~Voici la fin de la discussion concernant le travail sur le disque :
http://forum.ubuntu-fr.org/viewtopic.ph … #p19665851
Et le tout début de la discussion :
http://forum.ubuntu-fr.org/viewtopic.php?id=1814891&p=1
Merci d'avance pour vos conseils
Dernière modification par Eiracca (Le 16/05/2015, à 07:54)
Hors ligne
#2 Le 29/04/2015, à 16:48
- Eiracca
Re : [disque dur HS] Temps de boot anormalement long
Bonjour,
A priori, personne n'a eu le courage, ou le temps, de se pencher sur ce problème de boot... (il y a peut-être un os plus gros que ce que j'imaginais !)
Une petite question en passant : mon OS est en 32 bits alors que je pourrai être en 64, est-ce que si je fais une réinstallation (en profitant de passer en 64) je suis sûr de résoudre mes problèmes ou pas forcément ?
Merci
Dernière modification par Eiracca (Le 29/04/2015, à 16:49)
Hors ligne
#3 Le 29/04/2015, à 16:53
- nam1962
Re : [disque dur HS] Temps de boot anormalement long
Combien as tu de RAM ?
Peux-tu faire un memtest (avec un cd live) ?
donne aussi le retour de
sudo apt-get update[ Modéré ]
Hors ligne
#4 Le 29/04/2015, à 17:17
- Eiracca
Re : [disque dur HS] Temps de boot anormalement long
Bonjour nam1962 et merci,
J'ai 4Go de RAM
J'ai pas encore fait de memtest mais si il y a besoin je devrais pouvoir le faire mais pas avant demain (je suis sur le point de quitte rmon pc)
Pour la commande ça me donne ça :
accarie@MiniPCldlc:~$ sudo apt-get update
[sudo] password for accarie:
Ign http://archive.canonical.com trusty InRelease
Atteint http://archive.canonical.com trusty Release.gpg
Atteint http://archive.canonical.com trusty Release
Ign http://fr.archive.ubuntu.com trusty InRelease
Ign http://fr.archive.ubuntu.com trusty-updates InRelease
Ign http://security.ubuntu.com trusty-security InRelease
Ign http://extras.ubuntu.com trusty InRelease
Réception de : 1 http://extras.ubuntu.com trusty Release.gpg [72 B]
Atteint http://extras.ubuntu.com trusty Release
Atteint http://fr.archive.ubuntu.com trusty Release.gpg
Réception de : 2 http://security.ubuntu.com trusty-security Release.gpg [933 B]
Réception de : 3 http://fr.archive.ubuntu.com trusty-updates Release.gpg [933 B]
Réception de : 4 http://security.ubuntu.com trusty-security Release [63,5 kB]
Atteint http://fr.archive.ubuntu.com trusty Release
Réception de : 5 http://fr.archive.ubuntu.com trusty-updates Release [63,5 kB]
Atteint http://extras.ubuntu.com trusty/main Sources
Atteint http://archive.canonical.com trusty/partner i386 Packages
Atteint http://extras.ubuntu.com trusty/main i386 Packages
Réception de : 6 http://archive.canonical.com trusty/partner Translation-en [4 588 B]
Atteint http://fr.archive.ubuntu.com trusty/main Sources
Réception de : 7 http://security.ubuntu.com trusty-security/main Sources [79,4 kB]
Atteint http://fr.archive.ubuntu.com trusty/restricted Sources
Atteint http://fr.archive.ubuntu.com trusty/universe Sources
Atteint http://fr.archive.ubuntu.com trusty/multiverse Sources
Réception de : 8 http://security.ubuntu.com trusty-security/restricted Sources [2 061 B]
Atteint http://fr.archive.ubuntu.com trusty/main i386 Packages
Réception de : 9 http://security.ubuntu.com trusty-security/universe Sources [21,4 kB]
Ign http://extras.ubuntu.com trusty/main Translation-fr_FR
Atteint http://fr.archive.ubuntu.com trusty/restricted i386 Packages
Ign http://extras.ubuntu.com trusty/main Translation-fr
Ign http://extras.ubuntu.com trusty/main Translation-en
Réception de : 10 http://security.ubuntu.com trusty-security/multiverse Sources [1 922 B]
Atteint http://fr.archive.ubuntu.com trusty/universe i386 Packages
Atteint http://fr.archive.ubuntu.com trusty/multiverse i386 Packages
Réception de : 11 http://security.ubuntu.com trusty-security/main i386 Packages [250 kB]
Atteint http://fr.archive.ubuntu.com trusty/main Translation-fr
Atteint http://fr.archive.ubuntu.com trusty/main Translation-en
Réception de : 12 http://security.ubuntu.com trusty-security/restricted i386 Packages [8 846 B]
Réception de : 13 http://security.ubuntu.com trusty-security/universe i386 Packages [99,9 kB]
Atteint http://fr.archive.ubuntu.com trusty/multiverse Translation-fr
Réception de : 14 http://security.ubuntu.com trusty-security/multiverse i386 Packages [3 643 B]
Réception de : 15 http://security.ubuntu.com trusty-security/main Translation-en [132 kB]
Atteint http://fr.archive.ubuntu.com trusty/multiverse Translation-en
Atteint http://security.ubuntu.com trusty-security/multiverse Translation-en
Atteint http://fr.archive.ubuntu.com trusty/restricted Translation-fr
Atteint http://security.ubuntu.com trusty-security/restricted Translation-en
Atteint http://fr.archive.ubuntu.com trusty/restricted Translation-en
Réception de : 16 http://security.ubuntu.com trusty-security/universe Translation-en [55,9 kB]
Atteint http://fr.archive.ubuntu.com trusty/universe Translation-fr
Atteint http://fr.archive.ubuntu.com trusty/universe Translation-en
Réception de : 17 http://fr.archive.ubuntu.com trusty-updates/restricted i386 Packages [9 256 B]
Réception de : 18 http://fr.archive.ubuntu.com trusty-updates/main i386 Packages [493 kB]
Réception de : 19 http://fr.archive.ubuntu.com trusty-updates/multiverse i386 Packages [12,0 kB]
Réception de : 20 http://fr.archive.ubuntu.com trusty-updates/universe i386 Packages [274 kB]
Réception de : 21 http://fr.archive.ubuntu.com trusty-updates/main Translation-en [238 kB]
Atteint http://fr.archive.ubuntu.com trusty-updates/multiverse Translation-en
Atteint http://fr.archive.ubuntu.com trusty-updates/restricted Translation-en
Réception de : 22 http://fr.archive.ubuntu.com trusty-updates/universe Translation-en [142 kB]
Ign http://fr.archive.ubuntu.com trusty/main Translation-fr_FR
Ign http://fr.archive.ubuntu.com trusty/multiverse Translation-fr_FR
Ign http://fr.archive.ubuntu.com trusty/restricted Translation-fr_FR
Ign http://fr.archive.ubuntu.com trusty/universe Translation-fr_FR
1 957 ko réceptionnés en 1min 1s (31,7 ko/s)
Lecture des listes de paquets... Fait
accarie@MiniPCldlc:~$ Hors ligne
#5 Le 29/04/2015, à 17:23
- nam1962
Re : [disque dur HS] Temps de boot anormalement long
C'est propre.
Avec 4Go tu exploiteras mieux en 64bits, mais il est judicieux de vérifier ta mémoire.
Comme tu tombes sur moi, je propose forcément Xubuntu : ftp://ftp.free.fr/mirrors/ftp.xubuntu.c … -amd64.iso
Dans tous les cas, prend une 14.04.1.
(Puis règle au moins la swappiness).
Je jetterais aussi un coup d'oeil sur la poussière et les branchements.
Et vien sur fais les tests sans lecteur externe branché (est-ce le cas ?)
[ Modéré ]
Hors ligne
#6 Le 29/04/2015, à 17:28
- Eiracca
Re : [disque dur HS] Temps de boot anormalement long
Il n'y a pas de lecteur externe et la poussière est faite (j'ai pas encore refermé la boite) et pour les branchements tu parles surtout de la barette mémoire ou bien tous ?
Hors ligne
#7 Le 29/04/2015, à 17:35
- nam1962
Re : [disque dur HS] Temps de boot anormalement long
Tous. vérifie qu'il n'y ait pas de contact foireux.
après le memtest, si il ne donne pas d'erreur, passe un coup de smartmontools.
Mais le peu que j'ai compris donne des doutes côté RAM.
Vérifie enfin tes réglages Bios (si il n'y a pas des fantaisies côté émulation, gestion de l'énergie ou des ventilos)
[ Modéré ]
Hors ligne
#8 Le 29/04/2015, à 17:48
- Eiracca
Re : [disque dur HS] Temps de boot anormalement long
Ok, je regarde tout ça demain
Merci
Hors ligne
#9 Le 30/04/2015, à 14:24
- Eiracca
Re : [disque dur HS] Temps de boot anormalement long
Bonjour,
Ça y est, tout est Ok côté poussière et branchements...
Résultat du Memtest86+ du dvd live : :
***Pass complete, no errors, press Esc to exit***
(Petite question pour info, le test ne s'arrête-t-il jamais tout seul ? Car après le 1er passage il a fait un 2e puis il repartait pour un 3e...)
Côté Bios, j'ai remis les paramètres par défaut, au cas où...
Malgré tout ça, le démarrage prend toujours 10 à 15 minutes et les lenteurs habituelles sont toujours là, par exemple Ffox met plus d'une minute chrono avant de démarrer...
(Pour info la session live fonctionne très normalement.)
Côté smartmontools :
accarie@MiniPCldlc:~$ sudo smartctl -a /dev/sda
[sudo] password for accarie:
smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-49-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD3200BEVT-00A0RT0
Serial Number: WD-WX21A41U5916
LU WWN Device Id: 5 0014ee 6567aab53
Firmware Version: 01.01A01
User Capacity: 320 072 933 376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Apr 30 14:09:41 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (10860) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 109) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 126 123 051 Pre-fail Always - 158107
3 Spin_Up_Time 0x0027 187 184 021 Pre-fail Always - 1641
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2564
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 9690
10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2560
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 116
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2507
194 Temperature_Celsius 0x0022 116 101 000 Old_age Always - 31
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 198 198 000 Old_age Always - 126
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 051 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 9582 12115441
# 2 Extended offline Completed: read failure 90% 9529 12115441
# 3 Short offline Completed: read failure 90% 9529 12115441
# 4 Short offline Completed: read failure 90% 9482 12115441
# 5 Short offline Completed: read failure 90% 9208 12115441
# 6 Extended offline Completed: read failure 90% 9208 12115441
# 7 Short offline Completed: read failure 90% 9208 12115441
# 8 Extended offline Completed: read failure 90% 9125 12115395
# 9 Extended offline Completed: read failure 90% 9125 12115395
#10 Short offline Completed: read failure 90% 9125 12115395
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
accarie@MiniPCldlc:~$ Hors ligne
#10 Le 01/05/2015, à 09:29
- nam1962
Re : [disque dur HS] Temps de boot anormalement long
Le peu que je connaisse semble indiquer que ton disque a des signes de faiblesse.
Un coup d'oeil expert nous aidera.
[ Modéré ]
Hors ligne
#11 Le 01/05/2015, à 09:51
- F50
Re : [disque dur HS] Temps de boot anormalement long
Salut,
Le problème est ici :
[ 4.778229] hid-generic 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:12.0-4/input1
[ 11.309982] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 18.625663] random: nonblocking pool is initialized
[ 107.956183] Adding 3778556k swap on /dev/sda5. Priority:-1 extents:1 across:3778556k FS
Et ici :
[ 505.469432] init: plymouth-upstart-bridge main process ended, respawning
[ 2027.824040] init: cups main process (1239) killed by KILL signalLe premier est dû à un problème de montage de swap et le deuxième à cups semble-t-il. Tu as une imprimante branchée lors du boot ?
Poste le contenu de /etc/fstab et de la commande :
sudo blkid#12 Le 01/05/2015, à 10:11
- Christophe C
Re : [disque dur HS] Temps de boot anormalement long
J'ai déjà vu ce problème : c'était un port USB qui déconnait et qui bloquait le démarrage. C'était looooong. En le débranchant (dans le pc), j'avais réglé la question.
On peut aussi désactiver la détection de l'USB lors du boot dans le bios.
Dernière modification par Christophe C (Le 01/05/2015, à 10:13)
BountySource - Faite un petit don, ponctuel ou récurent, pour soutenir le développement de XFCE.
Timeshift - Sécurité : pensez à paramétrer des points de restauration système.
Euclide : « Ce qui est affirmé sans preuve peut être nié sans preuve ».
Hors ligne
#13 Le 01/05/2015, à 10:29
- Eiracca
Re : [disque dur HS] Temps de boot anormalement long
Bonjour,
Je passe en coup de vent et je ne reviens que ce soir...
Jamais eu d'imprimante branchée sur mon ordinateur, depuis quelques temps un DD externe mais pas branché lors du boot.
Voilà déjà le résultat de la commande :
accarie@MiniPCldlc:~$ sudo blkid
[sudo] password for accarie:
/dev/sda1: UUID="f624bd9a-a0f6-4a33-8469-63f76cca5388" TYPE="ext4"
/dev/sda5: UUID="14e03267-3fcf-4f8d-ab3f-74987aef6e25" TYPE="swap"
accarie@MiniPCldlc:~$ J'ai pas encore trouvé le contenu de /etc/fstab, c'est quoi la manip ?
Merci beaucoup
Hors ligne
#14 Le 01/05/2015, à 10:54
- F50
Re : [disque dur HS] Temps de boot anormalement long
Tu copies/colles le contenu du fichier /etc/fstab. Donne aussi le retour des commandes :
df -hmount#15 Le 01/05/2015, à 11:32
- moko138
Re : [disque dur HS] Temps de boot anormalement long
cat /etc/fstabDernière modification par moko138 (Le 01/05/2015, à 11:32)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#16 Le 01/05/2015, à 12:54
- Christophe C
Re : [disque dur HS] Temps de boot anormalement long
Attention, je n'ai pas dit que mon problème venait d'un périphérique USB : il n'y avait rien de branché. C'était le port USB lui-même qui bloquait le boot.
BountySource - Faite un petit don, ponctuel ou récurent, pour soutenir le développement de XFCE.
Timeshift - Sécurité : pensez à paramétrer des points de restauration système.
Euclide : « Ce qui est affirmé sans preuve peut être nié sans preuve ».
Hors ligne
#17 Le 02/05/2015, à 10:30
- Eiracca
Re : [disque dur HS] Temps de boot anormalement long
Bonjour à tous et merci,
J'ai trouvé un fichier etc/fstab.d mais il a l'air vide
df -h et mount me donne :
accarie@MiniPCldlc:~$ df -h
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
/dev/sda1 290G 130G 146G 48% /
none 4,0K 0 4,0K 0% /sys/fs/cgroup
udev 1,8G 4,0K 1,8G 1% /dev
tmpfs 363M 1,3M 362M 1% /run
none 5,0M 0 5,0M 0% /run/lock
none 1,8G 80K 1,8G 1% /run/shm
none 100M 44K 100M 1% /run/user
accarie@MiniPCldlc:~$ mount
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=accarie)
accarie@MiniPCldlc:~$ Et cat /etc/fstab
accarie@MiniPCldlc:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=f624bd9a-a0f6-4a33-8469-63f76cca5388 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=14e03267-3fcf-4f8d-ab3f-74987aef6e25 none swap sw 0 0
accarie@MiniPCldlc:~$ Pour répondre à Christophe C, j'ai changé le branchement de mes USB en façade et je les ai branchés sur un autre plot de ma carte mère, et dans mon bios, le boot est configuré sur le lecteur DVD puis le DD mais pas sur l'USB. Y aurait-il autre chose à faire pour creuser de ce côté là ?
Hors ligne
#18 Le 02/05/2015, à 11:38
- Christophe C
Re : [disque dur HS] Temps de boot anormalement long
Oui, tu les débranche complètement ton cable USB, tu boot et tu vois si cela arrange la chose. Ce n'est pas une solution durable, c'est juste pour voir si le problème vient de là.
Je me souviens aussi d'un pb plus ancien (2008) du à un lecteur de CD-ROM. Tu peux essayer de débrancher sélectivement de la carte mère tout ce qui n'est pas indispensable (y compris les barettes mémoires si tu en a plus de 1), et voir si un de ces débranchements règle ton pb : tu aura trouvé le matériel défaillant. Si le pb vient de d'un matériel, bien sur.
Dernière modification par Christophe C (Le 02/05/2015, à 11:38)
BountySource - Faite un petit don, ponctuel ou récurent, pour soutenir le développement de XFCE.
Timeshift - Sécurité : pensez à paramétrer des points de restauration système.
Euclide : « Ce qui est affirmé sans preuve peut être nié sans preuve ».
Hors ligne
#19 Le 02/05/2015, à 16:54
- Eiracca
Re : [disque dur HS] Temps de boot anormalement long
J'ai débranché le lecteur de CD/DVD, et la connectique de la face avant (dont USB). Il reste le disque dur, la barrette de RAM, écran, clavier et souris. Ça ne change rien...
Hors ligne
#20 Le 02/05/2015, à 17:01
- F50
Re : [disque dur HS] Temps de boot anormalement long
Poste le contenu de /etc/initramfs-tools/conf.d/resume.
Utilises-tu ou prévois-tu une imprimante sur cet ordi ? Si non, une fois sur le bureau, fait :
sudo apt-get remove cupsPuis reboot et poste à nouveau le contenu de /var/log/syslog du dernier boot.
Dernière modification par F50 (Le 02/05/2015, à 17:08)
#21 Le 02/05/2015, à 17:18
- Eiracca
Re : [disque dur HS] Temps de boot anormalement long
command not found en retour :
accarie@MiniPCldlc:~$ /etc/initramfs-tools/conf.d/resume
bash: /etc/initramfs-tools/conf.d/resume: Permission non accordée
accarie@MiniPCldlc:~$ sudo /etc/initramfs-tools/conf.d/resume
[sudo] password for accarie:
sudo: /etc/initramfs-tools/conf.d/resume: command not found
accarie@MiniPCldlc:~$ Hors ligne
#22 Le 02/05/2015, à 17:21
- Bougron
Re : [disque dur HS] Temps de boot anormalement long
Bonjour.
C'est
sudo pg /etc/initramfs-tools/conf.d/resumeAjout La commande "cat" affiche le contenu d'un fichier en une seule fois.
La commande "pg" affiche le contenu d'un fichier écran par écran. Elle oblige à faire un 'return' à chaque écran.
Dernière modification par Bougron (Le 03/05/2015, à 10:11)
Hors ligne
#23 Le 02/05/2015, à 17:34
- Eiracca
Re : [disque dur HS] Temps de boot anormalement long
Bonjour Bougron, 
accarie@MiniPCldlc:~$ sudo pg /etc/initramfs-tools/conf.d/resume
[sudo] password for accarie:
RESUME=UUID=e34ee1be-fa43-4fe9-b8d3-c80d3630589c
accarie@MiniPCldlc:~$ Je n'utilise pas d'imprimante et ce n'est pas prévu pour le moment.
Pour le contenu de /var/log/syslog du dernier boot je tape ça : cat /var/log/syslog ?
Hors ligne
#24 Le 02/05/2015, à 17:43
- F50
Re : [disque dur HS] Temps de boot anormalement long
Si pas d'imprimante prévu tu fais la commande au #20.
Il y a un problème ici :
sudo blkid
/dev/sda5: UUID="14e03267-3fcf-4f8d-ab3f-74987aef6e25" TYPE="swap"# swap was on /dev/sda5 during installation
UUID=14e03267-3fcf-4f8d-ab3f-74987aef6e25 none swap sw 0 0RESUME=UUID=e34ee1be-fa43-4fe9-b8d3-c80d3630589cComme tu le constates, le RESUME=UUID= ne correspond pas à celui de blkid et /fstab, il faut donc le changer pour qu'il soit le même que celui de blkid et /fstab. Puis tu reboot et tu postes à nouveau le contenu de /var/log/syslog.
#25 Le 02/05/2015, à 17:51
- Eiracca
Re : [disque dur HS] Temps de boot anormalement long
Pour info :
accarie@MiniPCldlc:~$ sudo apt-get remove cups
[sudo] password for accarie:
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants seront ENLEVÉS :
bluez-cups cups hplip indicator-printers printer-driver-gutenprint
printer-driver-hpcups printer-driver-postscript-hp printer-driver-splix
0 mis à jour, 0 nouvellement installés, 8 à enlever et 84 non mis à jour.
Après cette opération, 5 425 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n]
(Lecture de la base de données... 263322 fichiers et répertoires déjà installés.)
Suppression de bluez-cups (4.101-0ubuntu13.1) ...
Suppression de printer-driver-postscript-hp (3.14.3-0ubuntu3.2) ...
Suppression de hplip (3.14.3-0ubuntu3.2) ...
Suppression de printer-driver-hpcups (3.14.3-0ubuntu3.2) ...
Suppression de indicator-printers (0.1.7+14.04.20140527-0ubuntu1) ...
Suppression de printer-driver-gutenprint (5.2.10~pre2-0ubuntu2) ...
Suppression de printer-driver-splix (2.0.0+svn315-2fakesync1) ...
Suppression de cups (1.7.2-0ubuntu1.5) ...
Traitement déclenché pour man-db (2.6.7.1-1ubuntu1) ...
accarie@MiniPCldlc:~$ Je reboot...
Hors ligne