Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 16/05/2015, à 18:40

Jarodd

Sortie de veille lente

Bonjour,

J'utilise Ubuntu 14.04. J'ai paramétré la veille avec une demande de mot de passe. Je constate que la sortie de veille est longue : j'ai l'écran de login mais impossible de taper le mot de passe pendant une vingtaine de secondes. Si je le tape rien n'apparaît, puis d'un coup les lettres s'affichent d'un coup, malheureusement cela ne fonctionne pas pour les chiffres (et je veux en avoir). Je mets donc plus de 30 secondes à sortir de chaque veille.
Je suis passé sur un SSD mais cela n'a pas amélioré cette durée.

Y a-t-il un moyen pour que l'OS se réveille plus vite ? (tout en conservant les mêmes paramètres)

Merci pour vos conseils.


Ubuntu 22.04.3 LTS (64 bits)

Hors ligne

#2 Le 16/05/2015, à 21:41

J5012

Re : Sortie de veille lente

seulement la veille simple : l'extinction de l'ecran uniquement

Hors ligne

#3 Le 17/05/2015, à 08:57

Jarodd

Re : Sortie de veille lente

Il me semble que c'est ce que j'ai :

Lorsque l'écran est refermé => Mettre en veille (sur batterie / sur câble)
Mettre en veille si inactif depuis => Ne pas mettre en veille
Eteindre écran si inactif depuis => 30 minutes
Verouiller l'écran après => Extinction de l'écran


Ubuntu 22.04.3 LTS (64 bits)

Hors ligne

#4 Le 18/05/2015, à 23:13

J5012

Re : Sortie de veille lente

lors de la demande de passe sur l'ecran de verrouillage, as-tu le clavier virtuel en plus ?

Hors ligne

#5 Le 20/05/2015, à 17:42

Jarodd

Re : Sortie de veille lente

Non, pas de clavier virtuel.


Ubuntu 22.04.3 LTS (64 bits)

Hors ligne

#6 Le 20/05/2015, à 23:43

J5012

Re : Sortie de veille lente

les logiciels de handicap comme le clavier virtuel sont geres des le debut de session par lightdm (dans la configuration originale)

au sortir du verrouillage, tu n'as pas le clavier virtuel parce que tu l'as desinstallé manuellement , ou parce que tu as demandé à lightdm de le desactiver (commande terminal xhost) ?

edit : la lenteur pourrait etre due au fait que le gestionnaire de session cherche une application predefinie dans les parametres de session

Dernière modification par J5012 (Le 20/05/2015, à 23:46)

Hors ligne

#7 Le 21/05/2015, à 04:03

moko138

Re : Sortie de veille lente

Juste après la sortie de veille, fais

dmesg | tail -800>dm.txt

Ensuite tu colles ici le contenu du fichier dm.txt, entre balises-code.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#8 Le 25/05/2015, à 16:39

Jarodd

Re : Sortie de veille lente

[    0.181657] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.181708] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.181735] pci 0000:00:16.0: reg 0x10: [mem 0xc0814000-0xc081400f 64bit]
[    0.181821] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.181913] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.181937] pci 0000:00:1a.0: reg 0x10: [mem 0xc0819000-0xc08193ff]
[    0.182039] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.182090] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.182140] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.182160] pci 0000:00:1b.0: reg 0x10: [mem 0xc0810000-0xc0813fff 64bit]
[    0.182245] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.182323] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.182417] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.182456] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.182503] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.182601] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.182640] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.182686] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.182781] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.182820] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.182878] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.182902] pci 0000:00:1d.0: reg 0x10: [mem 0xc0818000-0xc08183ff]
[    0.183002] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.183052] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.183102] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    0.183286] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.183309] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.183320] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
[    0.183329] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.183340] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
[    0.183349] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.183360] pci 0000:00:1f.2: reg 0x24: [mem 0xc0817000-0xc08177ff]
[    0.183412] pci 0000:00:1f.2: PME# supported from D3hot
[    0.183485] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.183504] pci 0000:00:1f.3: reg 0x10: [mem 0xc0815000-0xc08150ff 64bit]
[    0.183528] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.183737] pci 0000:07:00.0: [14e4:4365] type 00 class 0x028000
[    0.183780] pci 0000:07:00.0: reg 0x10: [mem 0xc0700000-0xc0707fff 64bit]
[    0.184005] pci 0000:07:00.0: supports D1 D2
[    0.184007] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[    0.184229] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.194603] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.194611] pci 0000:00:1c.0:   bridge window [mem 0xc0700000-0xc07fffff]
[    0.194773] pci 0000:08:00.0: [10ec:5209] type 00 class 0xff0000
[    0.194852] pci 0000:08:00.0: reg 0x10: [mem 0xc0600000-0xc0600fff]
[    0.195381] pci 0000:08:00.0: supports D1 D2
[    0.195383] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
[    0.195471] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.206627] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.206635] pci 0000:00:1c.1:   bridge window [mem 0xc0600000-0xc06fffff]
[    0.206739] pci 0000:0e:00.0: [10ec:8168] type 00 class 0x020000
[    0.206766] pci 0000:0e:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.206804] pci 0000:0e:00.0: reg 0x18: [mem 0xc0500000-0xc0500fff 64bit]
[    0.206827] pci 0000:0e:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
[    0.206951] pci 0000:0e:00.0: supports D1 D2
[    0.206953] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.207002] pci 0000:0e:00.0: System wakeup disabled by ACPI
[    0.218595] pci 0000:00:1c.2: PCI bridge to [bus 0e]
[    0.218601] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.218606] pci 0000:00:1c.2:   bridge window [mem 0xc0500000-0xc05fffff]
[    0.218613] pci 0000:00:1c.2:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.219137] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.219196] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.219252] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.219306] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.219362] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.219418] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.219477] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.219532] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.219704] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.219739] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.219856] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.219858] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.219861] vgaarb: loaded
[    0.219863] vgaarb: bridge control possible 0000:00:02.0
[    0.220159] SCSI subsystem initialized
[    0.220218] libata version 3.00 loaded.
[    0.220249] ACPI: bus type USB registered
[    0.220269] usbcore: registered new interface driver usbfs
[    0.220281] usbcore: registered new interface driver hub
[    0.220307] usbcore: registered new device driver usb
[    0.220557] PCI: Using ACPI for IRQ routing
[    0.222263] PCI: pci_cache_line_size set to 64 bytes
[    0.222350] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.222352] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.222354] e820: reserve RAM buffer [mem 0xa4d37000-0xa7ffffff]
[    0.222355] e820: reserve RAM buffer [mem 0xaa7bf000-0xabffffff]
[    0.222359] e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
[    0.222360] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
[    0.222488] NetLabel: Initializing
[    0.222490] NetLabel:  domain hash size = 128
[    0.222491] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.222505] NetLabel:  unlabeled traffic allowed by default
[    0.222585] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.222591] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.225634] Switched to clocksource hpet
[    0.232047] AppArmor: AppArmor Filesystem Enabled
[    0.232088] pnp: PnP ACPI init
[    0.232107] ACPI: bus type PNP registered
[    0.232250] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.232253] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.232255] system 00:00: [io  0xffff] has been reserved
[    0.232258] system 00:00: [io  0xffff] has been reserved
[    0.232260] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.232262] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.232266] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.232269] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.232273] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.232313] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.232369] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.232372] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.232417] pnp 00:03: Plug and Play ACPI device, IDs SNYa009 PNP030b (active)
[    0.232454] pnp 00:04: Plug and Play ACPI device, IDs SYN2706 SYN2700 SYN0002 PNP0f13 (active)
[    0.232614] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.232617] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.232619] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.232621] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.232624] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.232626] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.232628] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.232631] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.232633] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.232636] system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved
[    0.232638] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.232881] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.232884] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[    0.232886] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.232897] pnp: PnP ACPI: found 7 devices
[    0.232898] ACPI: bus type PNP unregistered
[    0.239768] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.239776] pci 0000:00:1c.0:   bridge window [mem 0xc0700000-0xc07fffff]
[    0.239787] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.239794] pci 0000:00:1c.1:   bridge window [mem 0xc0600000-0xc06fffff]
[    0.239804] pci 0000:00:1c.2: PCI bridge to [bus 0e]
[    0.239808] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.239814] pci 0000:00:1c.2:   bridge window [mem 0xc0500000-0xc05fffff]
[    0.239819] pci 0000:00:1c.2:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.239828] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.239830] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.239832] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.239834] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.239836] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.239838] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.239840] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.239842] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.239844] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.239846] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.239848] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.239850] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.239852] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.239854] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.239856] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.239858] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.239860] pci_bus 0000:00: resource 20 [mem 0xafa00000-0xfeafffff]
[    0.239862] pci_bus 0000:07: resource 1 [mem 0xc0700000-0xc07fffff]
[    0.239865] pci_bus 0000:08: resource 1 [mem 0xc0600000-0xc06fffff]
[    0.239867] pci_bus 0000:0e: resource 0 [io  0x2000-0x2fff]
[    0.239869] pci_bus 0000:0e: resource 1 [mem 0xc0500000-0xc05fffff]
[    0.239871] pci_bus 0000:0e: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.239905] NET: Registered protocol family 2
[    0.240127] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.240225] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.240331] TCP: Hash tables configured (established 32768 bind 32768)
[    0.240352] TCP: reno registered
[    0.240360] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.240381] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.240438] NET: Registered protocol family 1
[    0.240455] pci 0000:00:02.0: Video device with shadowed ROM
[    0.273777] PCI: CLS 64 bytes, default 64
[    0.273847] Trying to unpack rootfs image as initramfs...
[    0.870486] Freeing initrd memory: 29032K (ffff88003473c000 - ffff880036396000)
[    0.870522] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.870526] software IO TLB [mem 0x9f1c0000-0xa31c0000] (64MB) mapped at [ffff88009f1c0000-ffff8800a31bffff]
[    0.870586] Simple Boot Flag at 0x44 set to 0x1
[    0.870843] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.870899] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[    0.870906] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[    0.870914] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[    0.870924] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[    0.870991] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.871020] Scanning for low memory corruption every 60 seconds
[    0.871443] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.871480] Initialise system trusted keyring
[    0.871512] audit: initializing netlink subsys (disabled)
[    0.871527] audit: type=2000 audit(1432557082.848:1): initialized
[    0.871964] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.873731] zpool: loaded
[    0.873733] zbud: loaded
[    0.873931] VFS: Disk quotas dquot_6.5.2
[    0.873973] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.874516] fuse init (API version 7.23)
[    0.874617] msgmni has been set to 7658
[    0.874691] Key type big_key registered
[    0.875149] Key type asymmetric registered
[    0.875152] Asymmetric key parser 'x509' registered
[    0.875194] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.875252] io scheduler noop registered
[    0.875255] io scheduler deadline registered (default)
[    0.875312] io scheduler cfq registered
[    0.875400] pcieport 0000:00:1c.0: device [8086:1e10] has invalid IRQ; check vendor BIOS
[    0.875567] pcieport 0000:00:1c.1: device [8086:1e12] has invalid IRQ; check vendor BIOS
[    0.875693] pcieport 0000:00:1c.2: device [8086:1e14] has invalid IRQ; check vendor BIOS
[    0.875851] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.875869] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.875933] efifb: probing for efifb
[    0.875952] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90004800000, using 4160k, total 4160k
[    0.875953] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    0.875954] efifb: scrolling: redraw
[    0.875956] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.876052] Console: switching to colour frame buffer device 170x48
[    0.876073] fb0: EFI VGA frame buffer device
[    0.876093] intel_idle: MWAIT substates: 0x21120
[    0.876094] intel_idle: v0.4 model 0x3A
[    0.876096] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.876787] ACPI: AC Adapter [ACAD] (on-line)
[    0.876892] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.876896] ACPI: Power Button [PWRB]
[    0.876955] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.877949] ACPI: Lid Switch [LID0]
[    0.878013] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.878017] ACPI: Power Button [PWRF]
[    0.878528] ACPI Error: [\_SB_.PCI0.PEG0.PEGP.LVL0] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    0.878535] ACPI Error: Method parse/execution failed [\_TZ_.THRM.GPIR] (Node ffff88014a82ea78), AE_NOT_FOUND (20140424/psparse-536)
[    0.878542] ACPI Error: Method parse/execution failed [\_TZ_.THRM.ISTT] (Node ffff88014a82eb18), AE_NOT_FOUND (20140424/psparse-536)
[    0.878546] ACPI Error: Method parse/execution failed [\_TZ_.THRM.FTTF] (Node ffff88014a82e910), AE_NOT_FOUND (20140424/psparse-536)
[    0.878552] ACPI Error: Method parse/execution failed [\_TZ_.THRM._CRT] (Node ffff88014a82e988), AE_NOT_FOUND (20140424/psparse-536)
[    0.878868] ACPI Error: [\_SB_.PCI0.PEG0.PEGP.LVL0] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    0.878874] ACPI Error: Method parse/execution failed [\_TZ_.THRM.GPIR] (Node ffff88014a82ea78), AE_NOT_FOUND (20140424/psparse-536)
[    0.878879] ACPI Error: Method parse/execution failed [\_TZ_.THRM.ISTT] (Node ffff88014a82eb18), AE_NOT_FOUND (20140424/psparse-536)
[    0.878884] ACPI Error: Method parse/execution failed [\_TZ_.THRM.FTTF] (Node ffff88014a82e910), AE_NOT_FOUND (20140424/psparse-536)
[    0.878890] ACPI Error: Method parse/execution failed [\_TZ_.THRM._CRT] (Node ffff88014a82e988), AE_NOT_FOUND (20140424/psparse-536)
[    0.880129] thermal LNXTHERM:00: registered as thermal_zone0
[    0.880132] ACPI: Thermal Zone [THRM] (52 C)
[    0.880163] GHES: HEST is not enabled!
[    0.880322] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.882710] Linux agpgart interface v0.103
[    0.884239] brd: module loaded
[    0.885044] loop: module loaded
[    0.885304] libphy: Fixed MDIO Bus: probed
[    0.885310] tun: Universal TUN/TAP device driver, 1.6
[    0.885312] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.885371] PPP generic driver version 2.4.2
[    0.885441] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.885445] ehci-pci: EHCI PCI platform driver
[    0.885583] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.885590] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.885607] ehci-pci 0000:00:1a.0: debug port 2
[    0.889499] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.889516] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0819000
[    0.901451] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.901508] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.901511] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.901513] usb usb1: Product: EHCI Host Controller
[    0.901515] usb usb1: Manufacturer: Linux 3.16.0-38-generic ehci_hcd
[    0.901517] usb usb1: SerialNumber: 0000:00:1a.0
[    0.901705] hub 1-0:1.0: USB hub found
[    0.901712] hub 1-0:1.0: 2 ports detected
[    0.901964] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.901970] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.901984] ehci-pci 0000:00:1d.0: debug port 2
[    0.905878] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.905894] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0818000
[    0.917472] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.917534] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.917537] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.917539] usb usb2: Product: EHCI Host Controller
[    0.917541] usb usb2: Manufacturer: Linux 3.16.0-38-generic ehci_hcd
[    0.917543] usb usb2: SerialNumber: 0000:00:1d.0
[    0.917691] hub 2-0:1.0: USB hub found
[    0.917700] hub 2-0:1.0: 2 ports detected
[    0.917847] ehci-platform: EHCI generic platform driver
[    0.917858] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.917863] ohci-pci: OHCI PCI platform driver
[    0.917874] ohci-platform: OHCI generic platform driver
[    0.917884] uhci_hcd: USB Universal Host Controller Interface driver
[    0.918014] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.918019] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.918120] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.918144] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
[    0.918212] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.918214] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.918216] usb usb3: Product: xHCI Host Controller
[    0.918217] usb usb3: Manufacturer: Linux 3.16.0-38-generic xhci_hcd
[    0.918219] usb usb3: SerialNumber: 0000:00:14.0
[    0.918349] hub 3-0:1.0: USB hub found
[    0.918360] hub 3-0:1.0: 4 ports detected
[    0.918726] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.918730] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.918770] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.918772] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.918774] usb usb4: Product: xHCI Host Controller
[    0.918775] usb usb4: Manufacturer: Linux 3.16.0-38-generic xhci_hcd
[    0.918777] usb usb4: SerialNumber: 0000:00:14.0
[    0.918906] hub 4-0:1.0: USB hub found
[    0.918917] hub 4-0:1.0: 4 ports detected
[    0.919333] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.921582] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.921587] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.921744] mousedev: PS/2 mouse device common for all mice
[    0.921991] rtc_cmos 00:01: RTC can wake from S4
[    0.922134] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.922164] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.922246] device-mapper: uevent: version 1.0.3
[    0.922335] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.922353] Intel P-state driver initializing.
[    0.922395] Intel pstate controlling: cpu 0
[    0.922444] Intel pstate controlling: cpu 1
[    0.922466] Intel pstate controlling: cpu 2
[    0.922485] Intel pstate controlling: cpu 3
[    0.922510] Consider also installing thermald for improved thermal control.
[    0.922517] ledtrig-cpu: registered to indicate activity on CPUs
[    0.922522] EFI Variables Facility v0.08 2004-May-17
[    0.954477] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.029265] ACPI: Battery Slot [BAT1] (battery present)
[    1.213397] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.249808] TCP: cubic registered
[    1.249946] NET: Registered protocol family 10
[    1.250207] NET: Registered protocol family 17
[    1.250225] Key type dns_resolver registered
[    1.250853] Loading compiled-in X.509 certificates
[    1.251972] Loaded X.509 cert 'Magrathea: Glacier signing key: c284edaccf0b473652c34d23bec356944236e63b'
[    1.251991] registered taskstats version 1
[    1.254414] Key type trusted registered
[    1.258547] Key type encrypted registered
[    1.258558] AppArmor: AppArmor sha1 policy hashing enabled
[    1.258562] ima: No TPM chip found, activating TPM-bypass!
[    1.258583] evm: HMAC attrs: 0x1
[    1.259031]   Magic number: 15:621:532
[    1.259045] bdi 1:10: hash matches
[    1.259051] tty ttyS12: hash matches
[    1.259136] rtc_cmos 00:01: setting system clock to 2015-05-25 12:31:23 UTC (1432557083)
[    1.259209] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.259211] EDD information not available.
[    1.259336] PM: Hibernation image not present or could not be loaded.
[    1.260391] Freeing unused kernel memory: 1352K (ffffffff81d1c000 - ffffffff81e6e000)
[    1.260393] Write protecting the kernel read-only data: 12288k
[    1.262224] Freeing unused kernel memory: 556K (ffff880002775000 - ffff880002800000)
[    1.263788] Freeing unused kernel memory: 500K (ffff880002b83000 - ffff880002c00000)
[    1.278261] systemd-udevd[127]: starting version 204
[    1.303085] rtsx_pci 0000:08:00.0: irq 41 for MSI/MSI-X
[    1.303108] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
[    1.305439] [drm] Initialized drm 1.1.0 20060810
[    1.305844] ahci 0000:00:1f.2: version 3.0
[    1.306044] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.306082] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.311879] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.311896] r8169 0000:0e:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.317714] r8169 0000:0e:00.0: irq 43 for MSI/MSI-X
[    1.318001] r8169 0000:0e:00.0 eth0: RTL8168g/8111g at 0xffffc90004788000, 30:f9:ed:a5:38:38, XID 0c000800 IRQ 43
[    1.318005] r8169 0000:0e:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.321675] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[    1.321681] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    1.332419] scsi0 : ahci
[    1.332617] scsi1 : ahci
[    1.332769] scsi2 : ahci
[    1.332917] scsi3 : ahci
[    1.333072] scsi4 : ahci
[    1.333227] scsi5 : ahci
[    1.333336] ata1: SATA max UDMA/133 abar m2048@0xc0817000 port 0xc0817100 irq 42
[    1.333340] ata2: DUMMY
[    1.333342] ata3: DUMMY
[    1.333344] ata4: DUMMY
[    1.333348] ata5: SATA max UDMA/133 abar m2048@0xc0817000 port 0xc0817300 irq 42
[    1.333350] ata6: DUMMY
[    1.335230] [drm] Memory usable by graphics device = 2048M
[    1.335235] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[    1.335237] fb: switching to inteldrmfb from EFI VGA
[    1.335264] Console: switching to colour dummy device 80x25
[    1.335343] [drm] Replacing VGA console driver
[    1.345675] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.345681] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.345988] hub 1-1:1.0: USB hub found
[    1.346041] hub 1-1:1.0: 6 ports detected
[    1.357340] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    1.357355] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.357356] [drm] Driver supports precise vblank timestamp query.
[    1.357467] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.453311] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    1.457319] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.470356] fbcon: inteldrmfb (fb0) is primary device
[    1.470391] Console: switching to colour frame buffer device 170x48
[    1.470424] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.470427] i915 0000:00:02.0: registered panic notifier
[    1.478152] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.478282] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.478505] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.589788] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.589793] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.590222] hub 2-1:1.0: USB hub found
[    1.590360] hub 2-1:1.0: 6 ports detected
[    1.653285] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.654279] ata1.00: ATA-9: TS512GSSD370, N1114B, max UDMA/133
[    1.654284] ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.655093] ata1.00: configured for UDMA/133
[    1.655336] scsi 0:0:0:0: Direct-Access     ATA      TS512GSSD370     4B   PQ: 0 ANSI: 5
[    1.655885] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
[    1.655910] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.655980] sd 0:0:0:0: [sda] Write Protect is off
[    1.655983] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.656006] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.658020]  sda: sda1 sda2 sda3
[    1.658366] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.661317] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    1.667253] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4710]
[    1.695615] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1144..]
[    1.750343] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2739, fw id: 1366777
[    1.762516] usb 1-1.1: New USB device found, idVendor=03eb, idProduct=880f
[    1.762522] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.762526] usb 1-1.1: Product: Atmel maXTouch Digitizer
[    1.762530] usb 1-1.1: Manufacturer: Atmel
[    1.769526] hidraw: raw HID events driver (C) Jiri Kosina
[    1.776645] usbcore: registered new interface driver usbhid
[    1.776650] usbhid: USB HID core driver
[    1.780588] hid-generic 0003:03EB:880F.0002: hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.1/input1
[    1.785904] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    1.837529] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    1.869218] tsc: Refined TSC clocksource calibration: 1795.919 MHz
[    1.973183] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.974780] ata5.00: ATAPI: MATSHITADVD-RAM UJ8C2, 1.00, max UDMA/133
[    1.976275] ata5.00: configured for UDMA/133
[    1.979610] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8C2    1.00 PQ: 0 ANSI: 5
[    1.992711] usb 1-1.3: New USB device found, idVendor=5986, idProduct=0543
[    1.992716] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.992718] usb 1-1.3: Product: Front Camera
[    1.992720] usb 1-1.3: Manufacturer: Generic
[    1.992722] usb 1-1.3: SerialNumber: 200901010001
[    1.996557] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.996562] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.996826] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.997070] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    2.285286] mmc0: new high speed SDHC card at address b368
[    2.287882] mmcblk0: mmc0:b368 NCard 15.4 GiB 
[    2.288555]  mmcblk0: p1
[    2.837218] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    2.869366] Switched to clocksource tsc
[   63.454386] random: nonblocking pool is initialized
[  790.356604] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
[  790.356608] EXT4-fs (dm-1): write access will be enabled during recovery
[  790.440163] EXT4-fs (dm-1): orphan cleanup on readonly fs
[  790.440238] EXT4-fs (dm-1): 1 orphan inode deleted
[  790.440241] EXT4-fs (dm-1): recovery complete
[  790.446575] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[  791.453933] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[  791.603264] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[  791.612034] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[  791.644938] systemd-udevd[469]: starting version 204
[  791.726480] lp: driver loaded but no devices found
[  791.740922] ppdev: user-space parallel port driver
[  791.808859] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input7
[  791.809497] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input8
[  791.886741] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[  791.897138] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  791.897587] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[  791.897597] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  791.897603] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[  791.897608] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  791.897610] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[  791.897616] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\_SB_.PCI0.LPCB.NFCM.GPIO) (20140424/utaddress-258)
[  791.897621] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  791.897624] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[  791.897629] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\_SB_.PCI0.LPCB.NFCM.GPIO) (20140424/utaddress-258)
[  791.897635] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000051f (\_SB_.PCI0.LPCB.SNC_.GPIO) (20140424/utaddress-258)
[  791.897640] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  791.897642] lpc_ich: Resource conflict(s) found affecting gpio_ich
[  791.899018] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03EB:880F.0001/input/input9
[  791.900565] hid-multitouch 0003:03EB:880F.0001: input,hiddev0,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.1/input0
[  791.918029] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x0 Type 0x0
[  791.933490] cfg80211: Calling CRDA to update world regulatory domain
[  792.002333] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[  792.002729] sony_laptop: brightness ignored, must be controlled by ACPI video driver
[  792.002842] sony_laptop: SNC setup done.
[  792.042935] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[  792.042943] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  792.042947] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[  792.042951] sound hdaudioC0D0:    mono: mono_out=0x0
[  792.042953] sound hdaudioC0D0:    inputs:
[  792.042958] sound hdaudioC0D0:      Mic=0x1a
[  792.042962] sound hdaudioC0D0:      Internal Mic=0x12
[  792.047565] kvm: disabled by bios
[  792.064932] intel_rapl: Found RAPL domain package
[  792.064938] intel_rapl: Found RAPL domain core
[  792.064941] intel_rapl: Found RAPL domain uncore
[  792.072516] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[  792.073451] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[  792.073602] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[  792.086591] kvm: disabled by bios
[  792.131655] audit: type=1400 audit(1432557874.619:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=611 comm="apparmor_parser"
[  792.131667] audit: type=1400 audit(1432557874.619:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=611 comm="apparmor_parser"
[  792.131675] audit: type=1400 audit(1432557874.619:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=611 comm="apparmor_parser"
[  792.132390] audit: type=1400 audit(1432557874.619:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=611 comm="apparmor_parser"
[  792.132402] audit: type=1400 audit(1432557874.619:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=611 comm="apparmor_parser"
[  792.132783] audit: type=1400 audit(1432557874.619:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=611 comm="apparmor_parser"
[  792.146665] media: Linux media interface: v0.10
[  792.166696] Linux video capture interface: v2.00
[  792.213990] uvcvideo: Found UVC 1.00 device Front Camera (5986:0543)
[  792.219403] input: Front Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input14
[  792.219507] usbcore: registered new interface driver uvcvideo
[  792.219510] USB Video Class driver (1.1.1)
[  792.237337] nfc: nfc_init: NFC Core ver 0.1
[  792.237399] NET: Registered protocol family 39
[  792.261875] microread_mei: Probing NFC microread
[  792.345139] wl: module license 'MIXED/Proprietary' taints kernel.
[  792.345143] Disabling lock debugging due to kernel taint
[  792.347888] wl: module verification failed: signature and/or  required key missing - tainting kernel
[  792.542412] wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
[  792.711153] cfg80211: World regulatory domain updated:
[  792.711159] cfg80211:  DFS Master region: unset
[  792.711162] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  792.711167] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  792.711170] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  792.711174] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  792.711177] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  792.711180] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  792.827663] init: failsafe main process (802) killed by TERM signal
[  793.026392] audit: type=1400 audit(1432557875.515:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=917 comm="apparmor_parser"
[  793.026405] audit: type=1400 audit(1432557875.515:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=917 comm="apparmor_parser"
[  793.027132] audit: type=1400 audit(1432557875.515:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=917 comm="apparmor_parser"
[  793.125927] init: cups main process (925) killed by HUP signal
[  793.125941] init: cups main process ended, respawning
[  793.173037] Bluetooth: Core ver 2.19
[  793.173063] NET: Registered protocol family 31
[  793.173065] Bluetooth: HCI device and connection manager initialized
[  793.173124] Bluetooth: HCI socket layer initialized
[  793.173128] Bluetooth: L2CAP socket layer initialized
[  793.173141] Bluetooth: SCO socket layer initialized
[  793.179141] Bluetooth: RFCOMM TTY layer initialized
[  793.179154] Bluetooth: RFCOMM socket layer initialized
[  793.179161] Bluetooth: RFCOMM ver 1.11
[  793.219198] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  793.219204] Bluetooth: BNEP filters: protocol multicast
[  793.219215] Bluetooth: BNEP socket layer initialized
[  793.386792] audit: type=1400 audit(1432557875.875:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1159 comm="apparmor_parser"
[  793.495028] init: samba-ad-dc main process (1122) terminated with status 1
[  793.622933] r8169 0000:0e:00.0 eth0: link down
[  793.622972] r8169 0000:0e:00.0 eth0: link down
[  793.622991] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  795.389647] cfg80211: Calling CRDA for country: FR
[  795.392461] cfg80211: Regulatory domain changed to country: FR
[  795.392465] cfg80211:  DFS Master region: unset
[  795.392467] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  795.392470] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  795.392472] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  795.392474] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[  795.392476] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[  795.392478] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[  795.993670] init: plymouth-upstart-bridge main process ended, respawning
[  796.005012] init: plymouth-upstart-bridge main process (1571) terminated with status 1
[  796.005033] init: plymouth-upstart-bridge main process ended, respawning
[  796.452476] r8169 0000:0e:00.0 eth0: link up
[  796.452486] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  805.381722] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  823.125827] audit_printk_skb: 156 callbacks suppressed
[  823.125832] audit: type=1400 audit(1432557906.217:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3147 comm="apparmor_parser"
[  823.125846] audit: type=1400 audit(1432557906.217:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3147 comm="apparmor_parser"
[  823.126563] audit: type=1400 audit(1432557906.217:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3147 comm="apparmor_parser"
[ 1297.289632] systemd-hostnamed[4860]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 1981.545152] systemd-hostnamed[5968]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2884.253628] systemd-hostnamed[7312]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 3132.750836] mmc0: card b368 removed
[ 5683.271608] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 5683.272018] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 5683.272359] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 5683.272722] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 5683.272962] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 5683.273410] pci_bus 0000:07: Allocating resources
[ 5683.273451] pcieport 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
[ 5683.273464] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
[ 5683.273483] pci_bus 0000:08: Allocating resources
[ 5683.273516] pcieport 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 08] add_size 1000
[ 5683.273526] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
[ 5683.273543] pci_bus 0000:0e: Allocating resources
[ 5683.273575] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 5683.273593] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 5683.273602] pcieport 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 5683.273610] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[ 5683.273618] pcieport 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[ 5683.273670] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xafb00000-0xafcfffff 64bit pref]
[ 5683.273714] pcieport 0000:00:1c.1: BAR 15: assigned [mem 0xafd00000-0xafefffff 64bit pref]
[ 5683.273728] pcieport 0000:00:1c.0: BAR 13: assigned [io  0x4000-0x4fff]
[ 5683.273738] pcieport 0000:00:1c.1: BAR 13: assigned [io  0x5000-0x5fff]
[ 5683.274458] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 5683.478253] cfg80211: Calling CRDA to update world regulatory domain
[ 5683.484503] cfg80211: World regulatory domain updated:
[ 5683.484510] cfg80211:  DFS Master region: unset
[ 5683.484512] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5683.484516] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5683.484519] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5683.484522] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5683.484525] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5683.484528] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5684.508912] PM: Syncing filesystems ... done.
[ 5684.513514] PM: Preparing system for mem sleep
[ 5684.513679] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 5684.515694] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 5684.516865] PM: Entering mem sleep
[ 5684.516925] Suspending console(s) (use no_console_suspend to debug)
[ 5684.517203] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5684.517246] sd 0:0:0:0: [sda] Stopping disk
[ 5684.593611] PM: suspend of devices complete after 76.575 msecs
[ 5684.609642] PM: late suspend of devices complete after 16.030 msecs
[ 5684.610308] r8169 0000:0e:00.0: System wakeup enabled by ACPI
[ 5684.610568] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 5684.610602] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 5684.610607] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 5684.625730] PM: noirq suspend of devices complete after 16.090 msecs
[ 5684.626037] ACPI: Preparing to enter system sleep state S3
[ 5684.627219] PM: Saving platform NVS memory
[ 5684.628263] Disabling non-boot CPUs ...
[ 5684.628307] intel_pstate CPU 1 exiting
[ 5684.629870] smpboot: CPU 1 is now offline
[ 5684.630235] intel_pstate CPU 2 exiting
[ 5684.733504] smpboot: CPU 2 is now offline
[ 5684.733835] intel_pstate CPU 3 exiting
[ 5684.733987] Broke affinity for irq 16
[ 5684.733996] Broke affinity for irq 23
[ 5684.733999] Broke affinity for irq 42
[ 5684.837486] smpboot: CPU 3 is now offline
[ 5684.839038] ACPI: Low-level resume complete
[ 5684.839087] PM: Restoring platform NVS memory
[ 5684.839664] Enabling non-boot CPUs ...
[ 5684.839707] x86: Booting SMP configuration:
[ 5684.839708] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 5684.869559] Intel pstate controlling: cpu 1
[ 5684.869608] CPU1 is up
[ 5684.869629] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 5684.882811] Intel pstate controlling: cpu 2
[ 5684.882857] CPU2 is up
[ 5684.882877] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5684.896205] Intel pstate controlling: cpu 3
[ 5684.896255] CPU3 is up
[ 5684.900388] ACPI: Waking up from system sleep state S3
[ 5684.951398] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 5684.951628] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 5684.951963] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 5684.952049] PM: noirq resume of devices complete after 14.784 msecs
[ 5684.952400] PM: early resume of devices complete after 0.325 msecs
[ 5684.952493] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 5684.952785] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 5684.953038] r8169 0000:0e:00.0: System wakeup disabled by ACPI
[ 5684.975155] sd 0:0:0:0: [sda] Starting disk
[ 5685.291128] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5685.291153] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5685.294858] ata5.00: configured for UDMA/133
[ 5685.298165] ata1.00: configured for UDMA/133
[ 5685.977814] PM: resume of devices complete after 1025.735 msecs
[ 5685.978033] PM: Finishing wakeup.
[ 5685.978034] Restarting tasks ... done.
[ 5690.309989] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 5690.487586] r8169 0000:0e:00.0 eth0: link down
[ 5690.487709] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5690.492692] r8169 0000:0e:00.0 eth0: link down
[ 5692.277017] cfg80211: Calling CRDA for country: FR
[ 5692.281774] cfg80211: Regulatory domain changed to country: FR
[ 5692.281779] cfg80211:  DFS Master region: unset
[ 5692.281782] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5692.281786] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 5692.281790] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 5692.281793] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 5692.281796] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 5692.281799] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 5693.940420] r8169 0000:0e:00.0 eth0: link up
[ 5693.940441] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5700.119690] i8042: Can't write CTR while closing AUX port
[ 5700.638997] i8042: Can't reactivate AUX port
[ 5700.639043] [sched_delayed] sched: RT throttling activated
[ 5701.063190] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4710]
[ 5701.092201] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1144..]
[ 5701.146995] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2739, fw id: 1366777
[ 5701.181540] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input16
[ 5701.666354] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4710]
[ 5701.696529] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1144..]
[ 5701.758133] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2739, fw id: 1366777
[ 5701.794956] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input18
[ 5848.463319] mmc0: cannot verify signal voltage switch
[ 5848.583326] mmc0: new ultra high speed SDR104 SDHC card at address 59b4
[ 5848.583674] mmcblk0: mmc0:59b4 SDU1  29.9 GiB 
[ 5848.584497]  mmcblk0: p1
[ 5865.004661] mmc0: card 59b4 removed
[ 5865.036862] FAT-fs (mmcblk0p1): unable to read boot sector to mark fs as dirty
[ 5871.027494] mmc0: new high speed SDHC card at address b368
[ 5871.027887] mmcblk0: mmc0:b368 NCard 15.4 GiB 
[ 5871.028907]  mmcblk0: p1
[ 5871.203720] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5888.472255] FAT-fs (mmcblk0p1): error, fat_free_clusters: deleting FAT entry beyond EOF
[ 5888.472270] FAT-fs (mmcblk0p1): Filesystem has been set read-only
[ 5890.748538] mmc0: card b368 removed
[ 5911.667163] mmc0: cannot verify signal voltage switch
[ 5911.787589] mmc0: new ultra high speed SDR104 SDHC card at address 59b4
[ 5911.787885] mmcblk0: mmc0:59b4 SDU1  29.9 GiB 
[ 5911.788689]  mmcblk0: p1
[ 5911.983156] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5967.069090] systemd-hostnamed[12365]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 5969.405278] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5987.805511] mmc0: card 59b4 removed
[ 5997.910898] mmc0: new high speed SDHC card at address b368
[ 5997.911292] mmcblk0: mmc0:b368 NCard 15.4 GiB 
[ 5997.912317]  mmcblk0: p1
[ 5998.096508] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 6081.203846] mmc0: card b368 removed
[ 8561.774717] FAT-fs (mmcblk0p1): FAT read failed (blocknr 624)
[ 8649.340004] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 8649.340408] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 8649.340753] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 8649.341098] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 8649.341426] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 8649.341864] pci_bus 0000:07: Allocating resources
[ 8649.341911] pci_bus 0000:08: Allocating resources
[ 8649.341954] pci_bus 0000:0e: Allocating resources
[ 8649.341988] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 8649.342515] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 8649.545930] cfg80211: Calling CRDA to update world regulatory domain
[ 8649.550181] cfg80211: World regulatory domain updated:
[ 8649.550185] cfg80211:  DFS Master region: unset
[ 8649.550187] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8649.550190] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8649.550192] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8649.550194] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8649.550196] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8649.550198] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8650.119742] PM: Syncing filesystems ... done.
[ 8650.125183] PM: Preparing system for mem sleep
[ 8650.125330] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 8650.127217] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 8650.128409] PM: Entering mem sleep
[ 8650.128476] Suspending console(s) (use no_console_suspend to debug)
[ 8650.128755] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 8650.128806] sd 0:0:0:0: [sda] Stopping disk
[ 8650.201150] PM: suspend of devices complete after 72.565 msecs
[ 8650.217142] PM: late suspend of devices complete after 15.992 msecs
[ 8650.217855] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 8650.217949] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 8650.218007] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 8650.218010] r8169 0000:0e:00.0: System wakeup enabled by ACPI
[ 8650.233232] PM: noirq suspend of devices complete after 16.091 msecs
[ 8650.233527] ACPI: Preparing to enter system sleep state S3
[ 8650.234315] PM: Saving platform NVS memory
[ 8650.235349] Disabling non-boot CPUs ...
[ 8650.235407] intel_pstate CPU 1 exiting
[ 8650.336999] smpboot: CPU 1 is now offline
[ 8650.337374] intel_pstate CPU 2 exiting
[ 8650.440969] smpboot: CPU 2 is now offline
[ 8650.441327] intel_pstate CPU 3 exiting
[ 8650.441493] Broke affinity for irq 23
[ 8650.441496] Broke affinity for irq 42
[ 8650.544961] smpboot: CPU 3 is now offline
[ 8650.546521] ACPI: Low-level resume complete
[ 8650.546570] PM: Restoring platform NVS memory
[ 8650.547131] Enabling non-boot CPUs ...
[ 8650.547174] x86: Booting SMP configuration:
[ 8650.547175] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 8650.576978] Intel pstate controlling: cpu 1
[ 8650.577027] CPU1 is up
[ 8650.577049] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 8650.590252] Intel pstate controlling: cpu 2
[ 8650.590299] CPU2 is up
[ 8650.590322] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 8650.603516] Intel pstate controlling: cpu 3
[ 8650.603559] CPU3 is up
[ 8650.607693] ACPI: Waking up from system sleep state S3
[ 8650.666859] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 8650.667134] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 8650.667376] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 8650.667470] PM: noirq resume of devices complete after 15.730 msecs
[ 8650.667767] PM: early resume of devices complete after 0.271 msecs
[ 8650.667858] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 8650.668198] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 8650.668657] r8169 0000:0e:00.0: System wakeup disabled by ACPI
[ 8650.754429] sd 0:0:0:0: [sda] Starting disk
[ 8651.070562] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8651.074370] ata5.00: configured for UDMA/133
[ 8651.078533] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8651.112568] ata1.00: configured for UDMA/133
[ 8651.701168] PM: resume of devices complete after 1033.722 msecs
[ 8651.701425] PM: Finishing wakeup.
[ 8651.701426] Restarting tasks ... done.
[ 8652.082277] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 8656.191025] r8169 0000:0e:00.0 eth0: link down
[ 8656.191094] r8169 0000:0e:00.0 eth0: link down
[ 8656.191149] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8658.591644] cfg80211: Calling CRDA for country: FR
[ 8658.596001] cfg80211: Regulatory domain changed to country: FR
[ 8658.596008] cfg80211:  DFS Master region: unset
[ 8658.596012] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8658.596018] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8658.596022] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8658.596028] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 8658.596031] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 8658.596033] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 8659.598684] r8169 0000:0e:00.0 eth0: link up
[ 8659.598699] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8665.827102] i8042: Can't write CTR while closing AUX port
[ 8666.345924] i8042: Can't reactivate AUX port
[ 8666.758414] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4710]
[ 8666.788466] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1144..]
[ 8666.847676] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2739, fw id: 1366777
[ 8666.885991] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input20
[ 8667.304174] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4710]
[ 8667.334082] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1144..]
[ 8667.391881] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2739, fw id: 1366777
[ 8667.428497] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input22

Ubuntu 22.04.3 LTS (64 bits)

Hors ligne

#9 Le 25/05/2015, à 21:50

moko138

Re : Sortie de veille lente

HS Tu as noté ceci ?

[ 5997.91...] mmcblk0: ... NCard 15.4 GiB
[ 5998.09...] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

[ 5911.787885] mmcblk0: mmc0:59b4 SDU1  29.9 GiB
[ 5911.788689]  mmcblk0: p1
[ 5911.983156] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5967.069090] systemd-hostnamed[12365]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 5969.405278] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

[ 5911.667163] mmc0: cannot verify signal voltage switch

Le lecteur de cartes a-t-il un problème ? Ou bien tu ne fais jamais de fsck à tes cartes ?
FIN du HS

Puis apparemment 2 secondes et demie pour sortir de veille :

[ 8649.340004] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 8649.340408] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 8649.340753] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 8649.341098] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 8649.341426] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 8649.341864] pci_bus 0000:07: Allocating resources
[ 8649.341911] pci_bus 0000:08: Allocating resources
[ 8649.341954] pci_bus 0000:0e: Allocating resources
[ 8649.341988] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 8649.342515] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 8649.545930] cfg80211: Calling CRDA to update world regulatory domain
[ 8649.550181] cfg80211: World regulatory domain updated:
[ 8649.550185] cfg80211:  DFS Master region: unset
[ 8649.550187] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8649.550190] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8649.550192] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8649.550194] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8649.550196] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8649.550198] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 8650.119742] PM: Syncing filesystems ... done.
[ 8650.125183] PM: Preparing system for mem sleep
[ 8650.125330] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 8650.127217] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 8650.128409] PM: Entering mem sleep
[ 8650.128476] Suspending console(s) (use no_console_suspend to debug)
[ 8650.128755] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 8650.128806] sd 0:0:0:0: [sda] Stopping disk
[ 8650.201150] PM: suspend of devices complete after 72.565 msecs
[ 8650.217142] PM: late suspend of devices complete after 15.992 msecs
[ 8650.217855] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 8650.217949] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 8650.218007] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 8650.218010] r8169 0000:0e:00.0: System wakeup enabled by ACPI
[ 8650.233232] PM: noirq suspend of devices complete after 16.091 msecs
[ 8650.233527] ACPI: Preparing to enter system sleep state S3
[ 8650.234315] PM: Saving platform NVS memory
[ 8650.235349] Disabling non-boot CPUs ...
[ 8650.235407] intel_pstate CPU 1 exiting
[ 8650.336999] smpboot: CPU 1 is now offline
[ 8650.337374] intel_pstate CPU 2 exiting
[ 8650.440969] smpboot: CPU 2 is now offline
[ 8650.441327] intel_pstate CPU 3 exiting
[ 8650.441493] Broke affinity for irq 23
[ 8650.441496] Broke affinity for irq 42
[ 8650.544961] smpboot: CPU 3 is now offline
[ 8650.546521] ACPI: Low-level resume complete
[ 8650.546570] PM: Restoring platform NVS memory
[ 8650.547131] Enabling non-boot CPUs ...
[ 8650.547174] x86: Booting SMP configuration:
[ 8650.547175] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 8650.576978] Intel pstate controlling: cpu 1
[ 8650.577027] CPU1 is up
[ 8650.577049] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 8650.590252] Intel pstate controlling: cpu 2
[ 8650.590299] CPU2 is up
[ 8650.590322] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 8650.603516] Intel pstate controlling: cpu 3
[ 8650.603559] CPU3 is up
[ 8650.607693] ACPI: Waking up from system sleep state S3
[ 8650.666859] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 8650.667134] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 8650.667376] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 8650.667470] PM: noirq resume of devices complete after 15.730 msecs
[ 8650.667767] PM: early resume of devices complete after 0.271 msecs
[ 8650.667858] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 8650.668198] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 8650.668657] r8169 0000:0e:00.0: System wakeup disabled by ACPI
[ 8650.754429] sd 0:0:0:0: [sda] Starting disk
[ 8651.070562] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8651.074370] ata5.00: configured for UDMA/133
[ 8651.078533] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8651.112568] ata1.00: configured for UDMA/133
[ 8651.701168] PM: resume of devices complete after 1033.722 msecs
[ 8651.701425] PM: Finishing wakeup.

  Donc ton problème intervient après la sortie de veille officielle, qui est en fait incomplète. Regardons la suite :

[ 8651.701426] Restarting tasks ... done.
[ 8652.082277] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off

    TROU de 4 secondes

[ 8656.191025] r8169 0000:0e:00.0 eth0: link down
[ 8656.191094] r8169 0000:0e:00.0 eth0: link down
[ 8656.191149] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

    TROU de 2,4 secondes

[ 8658.591644] cfg80211: Calling CRDA for country: FR
[ 8658.596001] cfg80211: Regulatory domain changed to country: FR
[ 8658.596008] cfg80211:  DFS Master region: unset
[ 8658.596012] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8658.596018] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8658.596022] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8658.596028] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 8658.596031] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 8658.596033] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 8659.598684] r8169 0000:0e:00.0 eth0: link up
[ 8659.598699] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8665.827102] i8042: Can't write CTR while closing AUX port
[ 8666.345924] i8042: Can't reactivate AUX port
[ 8666.758414] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4710]
[ 8666.788466] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1144..]
[ 8666.847676] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2739, fw id: 1366777
[ 8666.885991] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input20
[ 8667.304174] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4710]
[ 8667.334082] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1144..]
[ 8667.391881] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2739, fw id: 1366777
[ 8667.428497] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input22

En gros : réseau filaire, réseau wifi, et, en tout dernier, le touchpad.
Je ne vois rien de relatif aux chiffres ni au clavier. À moins que cela ne découle de deux lignes dont j'ignore le sens :

[ 8665.827102] i8042: Can't write CTR while closing AUX port
[ 8666.345924] i8042: Can't reactivate AUX port

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#10 Le 26/05/2015, à 21:30

Jarodd

Re : Sortie de veille lente

Merci pour l'analyse smile

Tu as vu juste pour le lecteur de cartes, voir ici (je ne l'ai pas encore réutilisé pour updater le sujet).

Il faut que je vérifie, mais de mémoire la sortie de veille peine aussi quand je n'ai pas de connexion (filaire ou wifi). Touchpad, c'est-à-dire ? C'est lui qui m'empêcherait de taper mon mot de passe ? Je n'ai pas installé de driver ou de logiciel, tout est natif au système, donc je suis censé faire quoi ?


Ubuntu 22.04.3 LTS (64 bits)

Hors ligne

#11 Le 26/05/2015, à 21:44

moko138

Re : Sortie de veille lente

Tu as vu juste pour le lecteur de cartes, voir ici (je ne l'ai pas encore réutilisé pour updater le sujet).

Ben oui, mais comme tu n'as pas donné suite, on est bien avancés... sad

Le "touchpad", c'est le rectangle qui tient lieu de souris et dont le pilote est i8042, que tu peux voir en #8 :

[    0.919333] i8042: PNP: PS/2 Controller

et à la fin du #9.

Est-ce que ça se passe plus vite si tu utilises un clavier usb et une souris usb ?


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#12 Le 26/05/2015, à 21:55

Jarodd

Re : Sortie de veille lente

Faut que je fasse quelques photos pour faire avancer l'autre sujet ! tongue

Je vais tester avec un clavier/souris USB alors smile


Ubuntu 22.04.3 LTS (64 bits)

Hors ligne