#1 Le 30/05/2015, à 11:34
- Jarodd
[Résou] Affichage "cassé", démarrage impossible
Bonjour,
Depuis quelques jours, je ne peux plus démarrer mon Ubuntu 12.04. L'écran est plein de tas de couleurs, de pixels qui "dansent". Dans un premier temps j'ai cru à l'écran qui mourrait.
Mais ce qui me fait douter, c'est que sur la partie de l'écan lisible, je ne peux plus me connecter. Parfois je n'arrive même pas à l'écran de login, je reste sur l'écran de chargement (où l'ont voit les différents services qui démarrent, l'analyse de l'état des disques durs, etc.) mais j'en reste là, avec une demande d'authentification en ligne de commande (il m'a semblé voir tty).
J'ai tenté un démarrage en recovery (voir la 1e image), cela n'a pas servi.
Quand j'arrive jusqu'à l'écran de login, je mets mes identifiants, mais ensuite le système redémarre, puis se bloque sur cet écran de chargement avec les services, où je vois ces logs (du moins ce que je peux lire, je remplace les tas de pixels par des "?") :
no ?e?ou??e? defined!
? ?ta?ting uHha?e
No ?ha?e? avalai?le...
J'ai essayé de prendre en photo ces écrans, j'espère que c'est assez lisible :
https://framapic.org/Yzq1lcKYyqsX/axYpLf92
https://framapic.org/VeEZsBWM9ixA/BthdyiQv
https://framapic.org/Xua5HjBozvY1/Qr0uc400
Le problème c'est que ne sachant pas quel est le souci, difficile de le résoudre... Y a-t-il des commandes qui peuvent dire de l'état du système ?
Est-ce que ces demi-logs vous disent quelque chose ?
Merci pour votre aide 
Edit 16/08 : résolu, c'est la carte graphique qui a mouru !
Dernière modification par Jarodd (Le 16/08/2015, à 19:27)
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#2 Le 30/05/2015, à 12:54
- Slystone
Re : [Résou] Affichage "cassé", démarrage impossible
Bonjour !
Chaud ton problème !
Voilà ce que je conseille :
1) Tu démarres avec une session live avec un live CD ou une clé USB
2) Si tu n'as pas encore fait de sauvegarde de tes données, tu t'empresses de les faire,
3) Tu regardes les logs de ton système (si t'arrives à arriver jusque là, si c'est ta carte graphique qui est en train de lâcher, ça sera plus compliqué). Les journaux sont normalement dans /var/log/. En session live le chemin sera un peu différent : il faudra que t'accèdes à ta partition d'abord, le chemin ressemblera sans doute à quelque chose comme ça : /media/tonutilisateur/tapartition/var/log/, à toi de chercher). Dedans il y a plusieurs fichiers qui vont nous intéresser : le dmesg, le boot, et le Xorg.0. Je t'invite à recopier leur contenu entre balises code (voir les boutons au-dessus de la fenêtre pour taper un nouveau message).
Dernière modification par Slystone (Le 30/05/2015, à 12:56)
«Rigid, the skeleton of habit alone upholds the human frame.» - Virginia Woolf.
Hors ligne
#3 Le 31/05/2015, à 11:25
- godverdami
Re : [Résou] Affichage "cassé", démarrage impossible
Malgré tout, ton problème semble être matériel: Soit l'écran soit la carte graphique, soit la carte mère. Tes carrés colorés, ça survient lorsque les tensions sont incorrectes.
Est-ce que tu arrives à afficher correctement le bios?
Semblerait que ce soit sur ta tour. Si oui ouvres la, dépoussière et vérifie que tout est correctement branché
Dernière modification par godverdami (Le 31/05/2015, à 11:30)
%NOINDEX%
Un peuple prêt à sacrifier un peu de liberté pour un peu de sécurité ne mérite ni l'une ni l'autre, et finit par perdre les deux.
Bonux lave plus blanc
Hors ligne
#4 Le 13/06/2015, à 19:26
- Jarodd
Re : [Résou] Affichage "cassé", démarrage impossible
Ok je vais faire un nettoyage, j'espère demain (il faut prévoir du temps...)
Pour le live CD, j'en ai un 64 bits, mon pc en rade est en 32 bits. Est-ce que cela fait l'affaire pour les backups ou il faut que j'en crée un 32 bits ?
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#5 Le 13/06/2015, à 22:46
- moko138
Re : [Résou] Affichage "cassé", démarrage impossible
Si le processeur de ta tour est en 32 bits, la clef en 64 b ne démarrera pas.
Note que sur une tour, APRÈS le dépoussiérage recommandé à juste titre par godverdami, il est facile de changer la CG pour une vieille, le temps de tests.
Avant chaque insertion, veiller à ce que les connecteurs, mâle et femelle, de la CG soient propres.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#6 Le 14/06/2015, à 14:19
- Jarodd
Re : [Résou] Affichage "cassé", démarrage impossible
Je n'ai pas d'autre CG pour tester. J'ai fait le gros nettoyage. Tout est bien branché. Mais j'ai toujours le problème 
Je vois bien le BIOS. J'ai pu accéder au système, il a été opérationnel pendant quelques minutes. Je peux lancer un Firefox, j'ai la fenêtre m'indiquant que j'ai des mises à jour à faire qui s'ouvre... Puis au bout de 2 ou 3 minutes, tout se pixellise et se fige, même la souris ne réagit plus.
Le souci c'est que je ne sais pas si c'est matériel ou logiciel ! Quels tests puis-je faire pour le savoir ?
Edit : je viens de rebooter, dès l'arrivée sur le bureau je suis passé en console (Crtl+Alt+F1). Là j'ai lancé un update (OK) puis un upgrade (qui tourne bien depuis plusieurs minutes, sans aucun problème d'affichage (même s'il y a peu de choses à afficher dans ce mode - j'ai juste les accents qui s'affichent mal, é = ~u par exemple). Si c'était matériel, je suppose que j'aurais l'affichage en console qui serait également cassé et me bloquerait toute action ? Donc cela ressemblerait plus à un problème logiciel ?
Edit2 : après cette màj, je suis resté sur le bureau sans lancer aucune appli. Affichage correct pendant au moins 10mn, j'ai bougé régulièrement la souris, ça répondait bien. D'un coup, paf ça pixellise et tout se bloque. Et 10 secondes après, reboot du pc (l'écran s'éteint et se rallume), avec blocage sur le même écran qu'à mon post #1 (no ?ha?e available,...).
Dernière modification par Jarodd (Le 14/06/2015, à 14:51)
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#7 Le 14/06/2015, à 15:15
- cqfd93
Re : [Résou] Affichage "cassé", démarrage impossible
Bonjour,
Y aurait-il un problème de mémoire défectueuse ? La CG utilise-t-elle de la mémoire dédiée ou partagée ?
− cqfd93 −
En ligne
#8 Le 14/06/2015, à 15:31
- Jarodd
Re : [Résou] Affichage "cassé", démarrage impossible
Aucune idée
Et je ne me rappelle pas le nom de ma CG (à part que c'est une nVidia)
Edit : j'ai une GeForce EN9600 GT (merci l'historique des messages du forum)
Dernière modification par Jarodd (Le 14/06/2015, à 15:33)
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#9 Le 14/06/2015, à 15:40
- moko138
Re : [Résou] Affichage "cassé", démarrage impossible
Merci de donner
sudo lshw -C videoet
uname -mr%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#10 Le 14/06/2015, à 18:06
- Jarodd
Re : [Résou] Affichage "cassé", démarrage impossible
Malheureusement je n'arrive pas à le faire. Contrairement à mes tests précédents, même en mode console l'affichage déraille complètement :
https://framapic.org/vJzkQPQUp25L/n8ymMuvD
J'ai vu le résultat de la commande quelques secondes (pas assez pour le recopier). Ca disjoncte, j'appuie plusieurs fois sur Entrée (ça m'ajoute des lignes jarodd@jarodd $) et là le résultat au dessus redevient lisible ! Mais juste pour quelques secondes seulement, avant de se rebrouiller.
Je re-re-reboote pour tenter de le recopier rapidement...
Edit : sur mes derniers essais, cela le fait aussi sur l'écran du BIOS et de GRUB. Pas moyen d'atteindre le mode console (j'ai lancé les commandes à l'aveugle en copiant le résutat dans un fichier, en espérant les récupérer d'une manière ou d'une autre)
Edit2 : même résultat en bootant sur le live CD. Donc le système n'est pas en cause. C'est peut-être l'écran, ou le câble, mais aucune moyen de vérifier...
Edit3 : j'ai retrouvé un vieux câble VGA, en attendant mieux ça me permettra d'avancer
Dernière modification par Jarodd (Le 14/06/2015, à 18:55)
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#11 Le 14/06/2015, à 19:20
- Jarodd
Re : [Résou] Affichage "cassé", démarrage impossible
sudo lshw -C video :
*-display
description: VGA compatible controller
produit: G94 [GeForce 9600 GT]
fabriquant: NVIDIA Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: a1
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
ressources: irq:46 mémoire:f6000000-f6ffffff mémoire:e0000000-efffffff mémoire:f4000000-f5ffffff portE/S:a000(taille=128) mémoire:f7000000-f707ffffuname -mr :
3.2.0-83-generic-pae i686/var/log/dmesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-83-generic-pae (buildd@kapok) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #120-Ubuntu SMP Wed Apr 29 15:55:27 UTC 2015 (Ubuntu 3.2.0-83.120-generic-pae 3.2.68)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP35-DS3R/EP35-DS3R, BIOS F2 01/04/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 3583MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 4095M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3583MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 512MB, type WB
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00f51f0] f51f0
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffa000-2000000
[ 0.000000] RAMDISK: 35a12000 - 36d01000
[ 0.000000] ACPI: RSDP 000f6be0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT dfee3040 00034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP dfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT dfee3180 04B32 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS dfee0000 00040
[ 0.000000] ACPI: HPET dfee7e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG dfee7e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC dfee7d00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3716MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfee0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048175
[ 0.000000] free_area_init_node: node 0, pgdat c1875c80, node_mem_map f3612200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7433 pages used for memmap
[ 0.000000] HighMem zone: 812505 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bb3000 s34304 r0 d23040 u57344
[ 0.000000] pcpu-alloc: s34304 r0 d23040 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038958
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-83-generic-pae root=UUID=a5e6c540-e1b3-46a2-bb1a-914c1ed4caff ro acpi=force irqpoll quiet splash
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 18874112 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:00120000)
[ 0.000000] Memory: 4106488k/4718592k available (5855k kernel code, 86212k reserved, 2861k data, 748k init, 3279752k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1884000 - 0xc193f000 ( 748 kB)
[ 0.000000] .data : 0xc15b7d3c - 0xc18834c0 (2861 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15b7d3c (5855 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2399.867 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.73 BogoMIPS (lpj=9599468)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.004040] Security Framework initialized
[ 0.004060] AppArmor: AppArmor initialized
[ 0.004062] Yama: becoming mindful.
[ 0.004133] Mount-cache hash table entries: 512
[ 0.004296] Initializing cgroup subsys cpuacct
[ 0.004304] Initializing cgroup subsys memory
[ 0.004314] Initializing cgroup subsys devices
[ 0.004317] Initializing cgroup subsys freezer
[ 0.004320] Initializing cgroup subsys blkio
[ 0.004328] Initializing cgroup subsys perf_event
[ 0.004361] CPU: Physical Processor ID: 0
[ 0.004363] CPU: Processor Core ID: 0
[ 0.004368] mce: CPU supports 6 MCE banks
[ 0.004377] CPU0: Thermal monitoring enabled (TM2)
[ 0.004381] using mwait in idle threads.
[ 0.007161] ACPI: Core revision 20110623
[ 0.012046] ftrace: allocating 26176 entries in 52 pages
[ 0.016062] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016430] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056599] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.060003] PEBS disabled due to CPU errata.
[ 0.060003] ... version: 2
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 2
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 000000007fffffff
[ 0.060003] ... fixed-purpose events: 3
[ 0.060003] ... event mask: 0000000700000003
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] CPU 1 irqstacks, hard=f74f2000 soft=f74f4000
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.148036] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148161] CPU 2 irqstacks, hard=f7520000 soft=f7522000
[ 0.148164] #2
[ 0.148167] smpboot cpu 2: start_ip = 9b000
[ 0.008000] Initializing CPU#2
[ 0.240035] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.240145] CPU 3 irqstacks, hard=f752e000 soft=f7538000
[ 0.240148] #3 Ok.
[ 0.240150] smpboot cpu 3: start_ip = 9b000
[ 0.008000] Initializing CPU#3
[ 0.332041] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.332073] Brought up 4 CPUs
[ 0.332077] Total of 4 processors activated (19199.23 BogoMIPS).
[ 0.336225] devtmpfs: initialized
[ 0.336225] EVM: security.selinux
[ 0.336225] EVM: security.SMACK64
[ 0.336225] EVM: security.capability
[ 0.336354] PM: Registering ACPI NVS region at dfee0000 (12288 bytes)
[ 0.337498] print_constraints: dummy:
[ 0.337530] RTC time: 19:07:48, date: 06/14/15
[ 0.337584] NET: Registered protocol family 16
[ 0.337615] Trying to unpack rootfs image as initramfs...
[ 0.337750] EISA bus registered
[ 0.337773] ACPI: bus type pci registered
[ 0.337861] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.337866] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.337869] PCI: Using MMCONFIG for extended config space
[ 0.337872] PCI: Using configuration type 1 for base access
[ 0.341298] bio: create slab <bio-0> at 0
[ 0.341298] ACPI: Added _OSI(Module Device)
[ 0.341298] ACPI: Added _OSI(Processor Device)
[ 0.341298] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.341298] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.341360] ACPI: EC: Look up EC in DSDT
[ 0.348354] ACPI: Interpreter enabled
[ 0.348384] ACPI: (supports S0 S3 S4 S5)
[ 0.348411] ACPI: Using IOAPIC for interrupt routing
[ 0.355348] ACPI: No dock devices found.
[ 0.355352] HEST: Table not found.
[ 0.355361] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.355437] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.355611] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.355616] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.355620] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.355623] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.355627] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.355645] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[ 0.355705] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
[ 0.355761] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.355766] pci 0000:00:01.0: PME# disabled
[ 0.355815] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.355865] pci 0000:00:1a.0: reg 20: [io 0xe000-0xe01f]
[ 0.355925] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.355974] pci 0000:00:1a.1: reg 20: [io 0xe100-0xe11f]
[ 0.356047] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.356096] pci 0000:00:1a.2: reg 20: [io 0xe500-0xe51f]
[ 0.356162] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.356182] pci 0000:00:1a.7: reg 10: [mem 0xfc105000-0xfc1053ff]
[ 0.356286] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.356305] pci 0000:00:1b.0: reg 10: [mem 0xfc100000-0xfc103fff 64bit]
[ 0.356384] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.356389] pci 0000:00:1b.0: PME# disabled
[ 0.356414] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.356496] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.356501] pci 0000:00:1c.0: PME# disabled
[ 0.356529] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.356611] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.356616] pci 0000:00:1c.3: PME# disabled
[ 0.356642] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 0.356723] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.356729] pci 0000:00:1c.4: PME# disabled
[ 0.356758] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.356808] pci 0000:00:1d.0: reg 20: [io 0xe200-0xe21f]
[ 0.356867] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.356917] pci 0000:00:1d.1: reg 20: [io 0xe300-0xe31f]
[ 0.356976] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.357026] pci 0000:00:1d.2: reg 20: [io 0xe400-0xe41f]
[ 0.357092] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.357112] pci 0000:00:1d.7: reg 10: [mem 0xfc104000-0xfc1043ff]
[ 0.357211] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.357284] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
[ 0.357375] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.357380] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.357434] pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101
[ 0.357453] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.357463] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.357473] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.357484] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.357494] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f]
[ 0.357504] pci 0000:00:1f.2: reg 24: [io 0xfc00-0xfc0f]
[ 0.357560] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.357579] pci 0000:00:1f.3: reg 10: [mem 0xfc106000-0xfc1060ff 64bit]
[ 0.357605] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.357646] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
[ 0.357665] pci 0000:00:1f.5: reg 10: [io 0xe700-0xe707]
[ 0.357675] pci 0000:00:1f.5: reg 14: [io 0xe800-0xe803]
[ 0.357685] pci 0000:00:1f.5: reg 18: [io 0xe900-0xe907]
[ 0.357695] pci 0000:00:1f.5: reg 1c: [io 0xea00-0xea03]
[ 0.357706] pci 0000:00:1f.5: reg 20: [io 0xeb00-0xeb0f]
[ 0.357716] pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f]
[ 0.357814] pci 0000:01:00.0: [10de:0622] type 0 class 0x000300
[ 0.357828] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.357842] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.357856] pci 0000:01:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit]
[ 0.357866] pci 0000:01:00.0: reg 24: [io 0xa000-0xa07f]
[ 0.357877] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.357949] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.357953] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.357958] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.357965] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.358012] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.358017] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.358091] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.358188] pci 0000:03:00.0: reg 24: [mem 0xfc000000-0xfc001fff]
[ 0.358259] pci 0000:03:00.0: PME# supported from D3hot
[ 0.358265] pci 0000:03:00.0: PME# disabled
[ 0.358298] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.358325] pci 0000:03:00.1: reg 10: [io 0xb000-0xb007]
[ 0.358342] pci 0000:03:00.1: reg 14: [io 0xb100-0xb103]
[ 0.358358] pci 0000:03:00.1: reg 18: [io 0xb200-0xb207]
[ 0.358374] pci 0000:03:00.1: reg 1c: [io 0xb300-0xb303]
[ 0.358390] pci 0000:03:00.1: reg 20: [io 0xb400-0xb40f]
[ 0.358483] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.358500] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.358505] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.358511] pci 0000:00:1c.3: bridge window [mem 0xfc000000-0xfc0fffff]
[ 0.358587] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.358609] pci 0000:04:00.0: reg 10: [io 0xc000-0xc0ff]
[ 0.358644] pci 0000:04:00.0: reg 18: [mem 0xf9000000-0xf9000fff 64bit]
[ 0.358685] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.358775] pci 0000:04:00.0: supports D1 D2
[ 0.358778] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.358785] pci 0000:04:00.0: PME# disabled
[ 0.358806] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.358818] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.358823] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.358829] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.358871] pci 0000:05:00.0: [10ec:8169] type 0 class 0x000200
[ 0.358891] pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.358904] pci 0000:05:00.0: reg 14: [mem 0xfb000000-0xfb0000ff]
[ 0.358953] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.358986] pci 0000:05:00.0: supports D1 D2
[ 0.358989] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.358995] pci 0000:05:00.0: PME# disabled
[ 0.359048] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.359054] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.359059] pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.359067] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.359071] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.359075] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.359079] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.359083] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
[ 0.359108] pci_bus 0000:00: on NUMA node 0
[ 0.359112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.359340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.359410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.359486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.359550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.359743] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.359748] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.359751] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.375093] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.375164] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.375234] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[ 0.375301] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.375369] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.375436] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.375504] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.375572] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.375714] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.375714] vgaarb: loaded
[ 0.375714] vgaarb: bridge control possible 0000:01:00.0
[ 0.375714] i2c-core: driver [aat2870] using legacy suspend method
[ 0.375714] i2c-core: driver [aat2870] using legacy resume method
[ 0.376056] SCSI subsystem initialized
[ 0.376098] libata version 3.00 loaded.
[ 0.376113] usbcore: registered new interface driver usbfs
[ 0.376133] usbcore: registered new interface driver hub
[ 0.376154] usbcore: registered new device driver usb
[ 0.376154] PCI: Using ACPI for IRQ routing
[ 0.377661] PCI: pci_cache_line_size set to 64 bytes
[ 0.377780] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.377785] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff
[ 0.377921] NetLabel: Initializing
[ 0.377924] NetLabel: domain hash size = 128
[ 0.377926] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.377940] NetLabel: unlabeled traffic allowed by default
[ 0.377971] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.377971] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.377971] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.388121] Switching to clocksource hpet
[ 0.399478] AppArmor: AppArmor Filesystem Enabled
[ 0.399512] pnp: PnP ACPI init
[ 0.399538] ACPI: bus type pnp registered
[ 0.399656] pnp 00:00: [bus 00-3f]
[ 0.399660] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.399664] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.399667] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.399671] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.399675] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.399678] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[ 0.399763] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.399883] pnp 00:01: [io 0x0010-0x001f]
[ 0.399886] pnp 00:01: [io 0x0022-0x003f]
[ 0.399889] pnp 00:01: [io 0x0044-0x005f]
[ 0.399892] pnp 00:01: [io 0x0062-0x0063]
[ 0.399895] pnp 00:01: [io 0x0065-0x006f]
[ 0.399898] pnp 00:01: [io 0x0074-0x007f]
[ 0.399901] pnp 00:01: [io 0x0091-0x0093]
[ 0.399904] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.399907] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.399910] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.399913] pnp 00:01: [io 0x0290-0x029f]
[ 0.399916] pnp 00:01: [io 0x0800-0x087f]
[ 0.399919] pnp 00:01: [io 0x0290-0x0294]
[ 0.399922] pnp 00:01: [io 0x0880-0x088f]
[ 0.400053] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.400057] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.400061] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.400065] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.400069] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.400075] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.400093] pnp 00:02: [dma 4]
[ 0.400096] pnp 00:02: [io 0x0000-0x000f]
[ 0.400099] pnp 00:02: [io 0x0080-0x0090]
[ 0.400102] pnp 00:02: [io 0x0094-0x009f]
[ 0.400105] pnp 00:02: [io 0x00c0-0x00df]
[ 0.400154] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.400223] pnp 00:03: [irq 0 disabled]
[ 0.400236] pnp 00:03: [irq 8]
[ 0.400239] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.400292] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.400329] pnp 00:04: [io 0x0070-0x0073]
[ 0.400379] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.400392] pnp 00:05: [io 0x0061]
[ 0.400441] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.400460] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.400467] pnp 00:06: [irq 13]
[ 0.400520] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.400820] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.400827] pnp 00:07: [irq 4]
[ 0.400925] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.401164] pnp 00:08: [io 0x0378-0x037f]
[ 0.401171] pnp 00:08: [irq 7]
[ 0.401253] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.401405] pnp 00:09: [io 0x0400-0x04bf]
[ 0.401488] system 00:09: [io 0x0400-0x04bf] has been reserved
[ 0.401493] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.401768] pnp 00:0a: [mem 0xf0000000-0xf3ffffff]
[ 0.401873] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.401878] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.402098] pnp 00:0b: [mem 0x000cdc00-0x000cffff]
[ 0.402102] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
[ 0.402105] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
[ 0.402108] pnp 00:0b: [mem 0x000fc000-0x000fffff]
[ 0.402112] pnp 00:0b: [mem 0xdfee0000-0xdfefffff]
[ 0.402115] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.402118] pnp 00:0b: [mem 0x00100000-0xdfedffff]
[ 0.402122] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.402125] pnp 00:0b: [mem 0xfed10000-0xfed1dfff]
[ 0.402128] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
[ 0.402131] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.402134] pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
[ 0.402138] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.402141] pnp 00:0b: [mem 0x000e0000-0x000effff]
[ 0.402254] system 00:0b: [mem 0x000cdc00-0x000cffff] has been reserved
[ 0.402259] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.402263] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.402267] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.402272] system 00:0b: [mem 0xdfee0000-0xdfefffff] could not be reserved
[ 0.402276] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.402280] system 00:0b: [mem 0x00100000-0xdfedffff] could not be reserved
[ 0.402285] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.402289] system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.402293] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.402298] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.402302] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.402306] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.402310] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[ 0.402315] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.402343] pnp 00:0c: [mem 0xffb80000-0xffbfffff]
[ 0.402414] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.402423] pnp: PnP ACPI: found 13 devices
[ 0.402425] ACPI: ACPI bus type pnp unregistered
[ 0.402431] PnPBIOS: Disabled by ACPI PNP
[ 0.440587] PCI: max bus depth: 1 pci_try_num: 2
[ 0.440642] pci 0000:00:1c.4: BAR 15: assigned [mem 0xdff00000-0xdfffffff pref]
[ 0.440649] pci 0000:00:1e.0: BAR 15: assigned [mem 0xfc200000-0xfc2fffff pref]
[ 0.440656] pci 0000:00:1c.4: BAR 15: reassigned [mem 0xfc300000-0xfc5fffff pref]
[ 0.440662] pci 0000:00:1c.3: BAR 15: assigned [mem 0xfc600000-0xfc7fffff 64bit pref]
[ 0.440668] pci 0000:00:1c.0: BAR 14: assigned [mem 0xfc800000-0xfc9fffff]
[ 0.440674] pci 0000:00:1c.0: BAR 15: assigned [mem 0xfca00000-0xfcbfffff 64bit pref]
[ 0.440680] pci 0000:01:00.0: BAR 6: assigned [mem 0xf7000000-0xf707ffff pref]
[ 0.440684] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.440688] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.440694] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.440699] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.440705] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.440709] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.440716] pci 0000:00:1c.0: bridge window [mem 0xfc800000-0xfc9fffff]
[ 0.440721] pci 0000:00:1c.0: bridge window [mem 0xfca00000-0xfcbfffff 64bit pref]
[ 0.440729] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.440733] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.440740] pci 0000:00:1c.3: bridge window [mem 0xfc000000-0xfc0fffff]
[ 0.440745] pci 0000:00:1c.3: bridge window [mem 0xfc600000-0xfc7fffff 64bit pref]
[ 0.440754] pci 0000:04:00.0: BAR 6: assigned [mem 0xfc300000-0xfc31ffff pref]
[ 0.440758] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.440762] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.440769] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.440774] pci 0000:00:1c.4: bridge window [mem 0xfc300000-0xfc5fffff pref]
[ 0.440783] pci 0000:05:00.0: BAR 6: assigned [mem 0xfc200000-0xfc21ffff pref]
[ 0.440787] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.440791] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.440797] pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.440803] pci 0000:00:1e.0: bridge window [mem 0xfc200000-0xfc2fffff pref]
[ 0.440827] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.440834] pci 0000:00:01.0: setting latency timer to 64
[ 0.440844] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.440852] pci 0000:00:1c.0: setting latency timer to 64
[ 0.440865] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.440873] pci 0000:00:1c.3: setting latency timer to 64
[ 0.440882] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.440889] pci 0000:00:1c.4: setting latency timer to 64
[ 0.440898] pci 0000:00:1e.0: setting latency timer to 64
[ 0.440904] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.440907] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.440911] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.440915] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.440919] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
[ 0.440923] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.440927] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 0.440931] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.440935] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.440938] pci_bus 0000:02: resource 1 [mem 0xfc800000-0xfc9fffff]
[ 0.440942] pci_bus 0000:02: resource 2 [mem 0xfca00000-0xfcbfffff 64bit pref]
[ 0.440946] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.440950] pci_bus 0000:03: resource 1 [mem 0xfc000000-0xfc0fffff]
[ 0.440953] pci_bus 0000:03: resource 2 [mem 0xfc600000-0xfc7fffff 64bit pref]
[ 0.440957] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.440961] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.440965] pci_bus 0000:04: resource 2 [mem 0xfc300000-0xfc5fffff pref]
[ 0.440968] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.440972] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.440976] pci_bus 0000:05: resource 2 [mem 0xfc200000-0xfc2fffff pref]
[ 0.440979] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.440983] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.440987] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.440990] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.440994] pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff]
[ 0.441047] NET: Registered protocol family 2
[ 0.444274] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.444570] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.445011] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.445228] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.445231] TCP reno registered
[ 0.445236] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.445245] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.445336] NET: Registered protocol family 1
[ 0.445364] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.445385] pci 0000:00:1a.0: PCI INT A disabled
[ 0.445402] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.445422] pci 0000:00:1a.1: PCI INT B disabled
[ 0.445436] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.445456] pci 0000:00:1a.2: PCI INT C disabled
[ 0.445467] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.445500] pci 0000:00:1a.7: PCI INT C disabled
[ 0.445527] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.445546] pci 0000:00:1d.0: PCI INT A disabled
[ 0.445555] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.445575] pci 0000:00:1d.1: PCI INT B disabled
[ 0.445584] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.445604] pci 0000:00:1d.2: PCI INT C disabled
[ 0.445614] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.445634] pci 0000:00:1d.7: PCI INT A disabled
[ 0.445666] pci 0000:01:00.0: Boot video device
[ 0.445683] PCI: CLS 32 bytes, default 64
[ 0.446282] audit: initializing netlink socket (disabled)
[ 0.446292] type=2000 audit(1434308867.440:1): initialized
[ 0.478524] highmem bounce pool size: 64 pages
[ 0.478531] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.481720] VFS: Disk quotas dquot_6.5.2
[ 0.481806] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.482610] fuse init (API version 7.17)
[ 0.482749] msgmni has been set to 1614
[ 0.483258] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.483296] io scheduler noop registered
[ 0.483299] io scheduler deadline registered
[ 0.483309] io scheduler cfq registered (default)
[ 0.483467] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.483510] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.483576] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.483619] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.483691] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.483735] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.483806] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.483850] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.483959] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.483989] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.484139] intel_idle: MWAIT substates: 0x20
[ 0.484142] intel_idle: does not run on family 6 model 15
[ 0.484246] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.484253] ACPI: Power Button [PWRB]
[ 0.484331] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.484336] ACPI: Power Button [PWRF]
[ 0.494453] ERST: Table is not found!
[ 0.494457] GHES: HEST is not enabled!
[ 0.494539] isapnp: Scanning for PnP cards...
[ 0.494572] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.514942] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.847615] isapnp: No Plug & Play device found
[ 0.911430] Freeing initrd memory: 19388k freed
[ 1.008781] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.028343] Linux agpgart interface v0.103
[ 1.030795] brd: module loaded
[ 1.031929] loop: module loaded
[ 1.032125] ahci 0000:03:00.0: version 3.0
[ 1.032140] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.048041] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.048047] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.048054] ahci 0000:03:00.0: setting latency timer to 64
[ 1.048486] scsi0 : ahci
[ 1.048616] scsi1 : ahci
[ 1.048748] ata1: SATA max UDMA/133 abar m8192@0xfc000000 port 0xfc000100 irq 19
[ 1.048754] ata2: SATA max UDMA/133 abar m8192@0xfc000000 port 0xfc000180 irq 19
[ 1.048818] ata_piix 0000:00:1f.2: version 2.13
[ 1.048832] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.048840] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.048887] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.049315] scsi2 : ata_piix
[ 1.049414] scsi3 : ata_piix
[ 1.050242] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.050249] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.050273] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.050281] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.050332] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.050649] scsi4 : ata_piix
[ 1.050752] scsi5 : ata_piix
[ 1.051293] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19
[ 1.051298] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19
[ 1.051367] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.051374] pata_acpi 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.051414] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 1.051429] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 1.051920] Fixed MDIO Bus: probed
[ 1.051949] tun: Universal TUN/TAP device driver, 1.6
[ 1.051952] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.052034] PPP generic driver version 2.4.2
[ 1.052181] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.052201] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.052221] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.052226] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.052286] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.056200] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.056220] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc105000
[ 1.072015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.072199] hub 1-0:1.0: USB hub found
[ 1.072205] hub 1-0:1.0: 6 ports detected
[ 1.072310] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.072327] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.072331] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.072397] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.076311] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.076329] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc104000
[ 1.092016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.092196] hub 2-0:1.0: USB hub found
[ 1.092202] hub 2-0:1.0: 6 ports detected
[ 1.092316] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.092336] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.092357] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.092368] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.092372] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.092433] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.092469] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 1.092646] hub 3-0:1.0: USB hub found
[ 1.092652] hub 3-0:1.0: 2 ports detected
[ 1.092744] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.092755] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.092759] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.092817] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.092852] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
[ 1.093028] hub 4-0:1.0: USB hub found
[ 1.093033] hub 4-0:1.0: 2 ports detected
[ 1.093125] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.093135] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.093140] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.093199] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.093224] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
[ 1.093395] hub 5-0:1.0: USB hub found
[ 1.093401] hub 5-0:1.0: 2 ports detected
[ 1.093493] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.093506] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.093510] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.093570] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.093594] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
[ 1.093772] hub 6-0:1.0: USB hub found
[ 1.093783] hub 6-0:1.0: 2 ports detected
[ 1.093874] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.093885] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.093889] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.093947] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.093972] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
[ 1.094146] hub 7-0:1.0: USB hub found
[ 1.094152] hub 7-0:1.0: 2 ports detected
[ 1.094243] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.094253] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.094258] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.094321] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.094346] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
[ 1.094525] hub 8-0:1.0: USB hub found
[ 1.094531] hub 8-0:1.0: 2 ports detected
[ 1.094709] usbcore: registered new interface driver libusual
[ 1.094784] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.095283] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.095295] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.095525] mousedev: PS/2 mouse device common for all mice
[ 1.095750] rtc_cmos 00:04: RTC can wake from S4
[ 1.095884] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.095910] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.096019] device-mapper: uevent: version 1.0.3
[ 1.096127] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.096168] EISA: Probing bus 0 at eisa.0
[ 1.096172] EISA: Cannot allocate resource for mainboard
[ 1.096175] Cannot allocate resource for EISA slot 1
[ 1.096178] Cannot allocate resource for EISA slot 2
[ 1.096180] Cannot allocate resource for EISA slot 3
[ 1.096183] Cannot allocate resource for EISA slot 4
[ 1.096186] Cannot allocate resource for EISA slot 5
[ 1.096189] Cannot allocate resource for EISA slot 6
[ 1.096191] Cannot allocate resource for EISA slot 7
[ 1.096194] Cannot allocate resource for EISA slot 8
[ 1.096197] EISA: Detected 0 cards.
[ 1.096215] cpufreq-nforce2: No nForce2 chipset.
[ 1.096218] cpuidle: using governor ladder
[ 1.096221] cpuidle: using governor menu
[ 1.096223] EFI Variables Facility v0.08 2004-May-17
[ 1.096608] TCP cubic registered
[ 1.096782] NET: Registered protocol family 10
[ 1.097580] NET: Registered protocol family 17
[ 1.097586] Registering the dns_resolver key type
[ 1.097615] Using IPI No-Shortcut mode
[ 1.097779] PM: Hibernation image not present or could not be loaded.
[ 1.097794] registered taskstats version 1
[ 1.108235] Magic number: 3:133:142
[ 1.108265] block ram7: hash matches
[ 1.108303] acpi device:13: hash matches
[ 1.108344] rtc_cmos 00:04: setting system clock to 2015-06-14 19:07:48 UTC (1434308868)
[ 1.108376] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.108379] EDD information not available.
[ 1.368040] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.368084] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.378676] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.389318] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.389323] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.444023] Refined TSC clocksource calibration: 2399.999 MHz.
[ 1.444029] Switching to clocksource tsc
[ 1.521828] hub 1-1:1.0: USB hub found
[ 1.522142] hub 1-1:1.0: 4 ports detected
[ 1.632014] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 1.764700] hub 1-2:1.0: USB hub found
[ 1.764769] hub 1-2:1.0: 4 ports detected
[ 1.844060] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.844074] ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.844195] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.844210] ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.860197] ata3.00: ATAPI: PIONEER DVD-RW DVR-215D, 1.13, max UDMA/66
[ 1.860257] ata4.00: ATAPI: PIONEER DVD-RW DVR-215D, 1.13, max UDMA/66
[ 1.860610] ata3.01: HPA detected: current 1953523055, native 1953525168
[ 1.860617] ata3.01: ATA-8: ST31000340AS, SD15, max UDMA/133
[ 1.860621] ata3.01: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.860698] ata4.01: HPA detected: current 976771055, native 976773168
[ 1.860705] ata4.01: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 1.860709] ata4.01: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.876016] usb 2-3: new high-speed USB device number 2 using ehci_hcd
[ 1.876192] ata3.00: configured for UDMA/66
[ 1.876258] ata4.00: configured for UDMA/66
[ 1.892602] ata4.01: configured for UDMA/133
[ 1.892674] ata3.01: configured for UDMA/133
[ 1.916473] scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVR-215D 1.13 PQ: 0 ANSI: 5
[ 1.934400] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.934404] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.934567] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.934666] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 1.940309] scsi 2:0:1:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
[ 1.940502] sd 2:0:1:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.940534] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 1.940596] sd 2:0:1:0: [sda] Write Protect is off
[ 1.940604] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.940641] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.946441] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-215D 1.13 PQ: 0 ANSI: 5
[ 1.964449] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.964598] sr 3:0:0:0: Attached scsi CD-ROM sr1
[ 1.964692] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 1.970306] scsi 3:0:1:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
[ 1.970483] sd 3:0:1:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 1.970505] sd 3:0:1:0: Attached scsi generic sg3 type 0
[ 1.970579] sd 3:0:1:0: [sdb] Write Protect is off
[ 1.970584] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.970624] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.985000] sdb: sdb1 < sdb5 >
[ 1.985364] sd 3:0:1:0: [sdb] Attached SCSI disk
[ 2.012543] Initializing USB Mass Storage driver...
[ 2.012695] scsi6 : usb-storage 2-3:1.0
[ 2.012787] usbcore: registered new interface driver usb-storage
[ 2.012790] USB Mass Storage support registered.
[ 2.037201] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 2.038041] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.038120] Freeing unused kernel memory: 748k freed
[ 2.038439] Write protecting the kernel text: 5856k
[ 2.038465] Write protecting the kernel read-only data: 2392k
[ 2.038468] NX-protecting the kernel data: 4384k
[ 2.079215] udevd[128]: starting version 175
[ 2.080276] usb 1-1.1: new low-speed USB device number 4 using ehci_hcd
[ 2.124504] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.124546] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 2.126674] scsi7 : pata_jmicron
[ 2.131706] scsi8 : pata_jmicron
[ 2.132566] ata7: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16
[ 2.132571] ata8: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16
[ 2.154374] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.154399] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.154435] r8169 0000:04:00.0: setting latency timer to 64
[ 2.154514] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
[ 2.155252] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xf840a000, 00:1d:7d:01:4a:01, XID 18000000 IRQ 44
[ 2.155257] r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.156505] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.156533] r8169 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.156553] r8169 0000:05:00.0: (unregistered net_device): not PCI Express
[ 2.157286] r8169 0000:05:00.0: eth1: RTL8110s at 0xf8414000, e0:91:f5:1d:21:be, XID 04000000 IRQ 20
[ 2.157291] r8169 0000:05:00.0: eth1: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 2.231684] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
[ 2.231817] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.7-1.1/input0
[ 2.238340] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.1/input/input3
[ 2.238448] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.7-1.1/input1
[ 2.238470] usbcore: registered new interface driver usbhid
[ 2.238473] usbhid: USB HID core driver
[ 2.540284] usb 1-1.2: new low-speed USB device number 5 using ehci_hcd
[ 2.638175] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[ 2.638355] generic-usb 0003:04F2:0939.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.7-1.2/input0
[ 3.012782] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 3.013407] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 3.014032] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 3.014656] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.015490] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 3.015741] sd 6:0:0:1: Attached scsi generic sg5 type 0
[ 3.015986] sd 6:0:0:2: Attached scsi generic sg6 type 0
[ 3.016276] sd 6:0:0:3: Attached scsi generic sg7 type 0
[ 3.754777] sd 6:0:0:0: [sdc] 62748672 512-byte logical blocks: (32.1 GB/29.9 GiB)
[ 3.756765] sd 6:0:0:0: [sdc] Write Protect is off
[ 3.756770] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 3.759391] sd 6:0:0:0: [sdc] No Caching mode page found
[ 3.759395] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.762140] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 3.763389] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 3.764645] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 3.769268] sd 6:0:0:0: [sdc] No Caching mode page found
[ 3.769272] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.771474] sdc: sdc1
[ 3.774639] sd 6:0:0:0: [sdc] No Caching mode page found
[ 3.774644] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.774648] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 9.424570] EXT3-fs (sda1): recovery required on readonly filesystem
[ 9.424575] EXT3-fs (sda1): write access will be enabled during recovery
[ 11.100093] kjournald starting. Commit interval 5 seconds
[ 11.100150] EXT3-fs (sda1): orphan cleanup on readonly fs
[ 11.100158] ext3_orphan_cleanup: deleting unreferenced inode 221898
[ 11.100206] ext3_orphan_cleanup: deleting unreferenced inode 221680
[ 11.100221] ext3_orphan_cleanup: deleting unreferenced inode 221664
[ 11.100253] ext3_orphan_cleanup: deleting unreferenced inode 221629
[ 11.100274] ext3_orphan_cleanup: deleting unreferenced inode 228510
[ 11.100284] ext3_orphan_cleanup: deleting unreferenced inode 228508
[ 11.100293] ext3_orphan_cleanup: deleting unreferenced inode 228506
[ 11.100301] ext3_orphan_cleanup: deleting unreferenced inode 228498
[ 11.100310] ext3_orphan_cleanup: deleting unreferenced inode 228485
[ 11.100318] EXT3-fs (sda1): 9 orphan inodes deleted
[ 11.100321] EXT3-fs (sda1): recovery complete
[ 11.152915] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 21.438999] Adding 3960016k swap on /dev/sda2. Priority:-1 extents:1 across:3960016k
[ 21.458614] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.458623] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.510494] udevd[478]: starting version 175
[ 21.586901] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.634401] lp: driver loaded but no devices found
[ 21.686614] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.703567] type=1400 audit(1434301689.088:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=698 comm="apparmor_parser"
[ 21.703653] type=1400 audit(1434301689.088:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=692 comm="apparmor_parser"
[ 21.704216] type=1400 audit(1434301689.092:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=698 comm="apparmor_parser"
[ 21.704284] type=1400 audit(1434301689.092:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=692 comm="apparmor_parser"
[ 21.704563] type=1400 audit(1434301689.092:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=698 comm="apparmor_parser"
[ 21.704635] type=1400 audit(1434301689.092:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=692 comm="apparmor_parser"
[ 21.739355] parport_pc 00:08: reported by Plug and Play ACPI
[ 21.739403] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 21.747072] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 21.833919] usbcore: registered new interface driver usbmouse
[ 21.833923] usbmouse: v1.6:USB HID Boot Protocol mouse driver
[ 21.837877] lp0: using parport0 (interrupt-driven).
[ 21.843563] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 22.061170] ppdev: user-space parallel port driver
[ 22.284272] nvidia: module license 'NVIDIA' taints kernel.
[ 22.284277] Disabling lock debugging due to kernel taint
[ 22.361772] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 22.361829] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 22.361859] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 22.399487] hda_codec: ALC889A: BIOS auto-probing.
[ 22.408724] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 22.408846] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 22.408951] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 22.409053] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 22.409155] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 22.409257] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 22.409363] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 22.409466] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 22.697148] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.697168] nvidia 0000:01:00.0: setting latency timer to 64
[ 22.697174] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 22.697446] NVRM: loading NVIDIA UNIX x86 Kernel Module 340.65 Tue Dec 2 08:57:50 PST 2014
[ 23.618963] EXT3-fs (sda1): using internal journal
[ 52.522624] kjournald starting. Commit interval 5 seconds
[ 52.522661] EXT3-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
[ 52.523201] EXT3-fs (sda5): using internal journal
[ 52.523208] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 59.188971] kjournald starting. Commit interval 5 seconds
[ 59.189544] EXT3-fs (sda9): using internal journal
[ 59.189550] EXT3-fs (sda9): mounted filesystem with ordered data mode
[ 87.716899] kjournald starting. Commit interval 5 seconds
[ 87.758845] EXT3-fs (sda3): using internal journal
[ 87.758852] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 87.888775] kjournald starting. Commit interval 5 seconds
[ 87.889680] EXT3-fs (sda8): using internal journal
[ 87.889687] EXT3-fs (sda8): mounted filesystem with ordered data mode
[ 88.210371] init: failsafe main process (1170) killed by TERM signal
[ 88.658553] type=1400 audit(1434301756.044:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1233 comm="apparmor_parser"
[ 88.659184] type=1400 audit(1434301756.044:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1233 comm="apparmor_parser"
[ 88.659535] type=1400 audit(1434301756.044:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1233 comm="apparmor_parser"
[ 88.669180] type=1400 audit(1434301756.056:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1231 comm="apparmor_parser"
[ 88.677984] type=1400 audit(1434301756.064:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1236 comm="apparmor_parser"
[ 88.678709] type=1400 audit(1434301756.064:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1236 comm="apparmor_parser"
[ 88.680069] type=1400 audit(1434301756.068:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1237 comm="apparmor_parser"
[ 88.680831] type=1400 audit(1434301756.068:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1237 comm="apparmor_parser"
[ 88.684313] type=1400 audit(1434301756.072:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1239 comm="apparmor_parser"
[ 88.684686] type=1400 audit(1434301756.072:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1239 comm="apparmor_parser"
[ 91.730380] Bluetooth: Core ver 2.16
[ 91.730405] NET: Registered protocol family 31
[ 91.730409] Bluetooth: HCI device and connection manager initialized
[ 91.730413] Bluetooth: HCI socket layer initialized
[ 91.730416] Bluetooth: L2CAP socket layer initialized
[ 91.730424] Bluetooth: SCO socket layer initialized
[ 91.734740] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 91.734745] Bluetooth: BNEP filters: protocol multicast
[ 91.971870] Bluetooth: RFCOMM TTY layer initialized
[ 91.971878] Bluetooth: RFCOMM socket layer initialized
[ 91.971880] Bluetooth: RFCOMM ver 1.11
[ 92.310960] init: gdm main process (1389) killed by TERM signal/var/log/Xorg.0.log :
[ 92.590]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 92.590] X Protocol Version 11, Revision 0
[ 92.590] Build Operating System: Linux 2.6.42-76-generic i686 Ubuntu
[ 92.590] Current Operating System: Linux jarodd 3.2.0-83-generic-pae #120-Ubuntu SMP Wed Apr 29 15:55:27 UTC 2015 i686
[ 92.590] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-83-generic-pae root=UUID=a5e6c540-e1b3-46a2-bb1a-914c1ed4caff ro acpi=force irqpoll quiet splash
[ 92.590] Build Date: 12 February 2015 02:51:26PM
[ 92.590] xorg-server 2:1.11.4-0ubuntu10.17 (For technical support please see http://www.ubuntu.com/support)
[ 92.590] Current version of pixman: 0.30.2
[ 92.590] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 92.590] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 92.590] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 14 19:09:19 2015
[ 92.769] (==) Using config file: "/etc/X11/xorg.conf"
[ 93.048] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 93.381] (==) ServerLayout "Default Layout"
[ 93.381] (**) |-->Screen "Default Screen" (0)
[ 93.381] (**) | |-->Monitor "Configured Monitor"
[ 93.381] (**) | |-->Device "Configured Video Device"
[ 93.381] (**) |-->Input Device "Keyboard0"
[ 93.381] (**) |-->Input Device "Mouse0"
[ 93.381] (==) Automatically adding devices
[ 93.381] (==) Automatically enabling devices
[ 93.583] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 93.583] Entry deleted from font path.
[ 93.952] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 93.952] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 93.952] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 93.952] (WW) Disabling Keyboard0
[ 93.952] (WW) Disabling Mouse0
[ 93.952] (II) Loader magic: 0xb77235a0
[ 93.952] (II) Module ABI versions:
[ 93.952] X.Org ANSI C Emulation: 0.4
[ 93.952] X.Org Video Driver: 11.0
[ 93.952] X.Org XInput driver : 16.0
[ 93.952] X.Org Server Extension : 6.0
[ 93.953] (--) PCI:*(0:1:0:0) 10de:0622:1043:8275 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf4000000/33554432, I/O @ 0x0000a000/128, BIOS @ 0x????????/524288
[ 93.954] (II) Open ACPI successful (/var/run/acpid.socket)
[ 93.954] (II) "extmod" will be loaded by default.
[ 93.954] (II) "dbe" will be loaded by default.
[ 93.954] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 93.954] (II) "record" will be loaded by default.
[ 93.954] (II) "dri" will be loaded by default.
[ 93.954] (II) "dri2" will be loaded by default.
[ 93.954] (II) LoadModule: "glx"
[ 94.080] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 94.301] (II) Module glx: vendor="X.Org Foundation"
[ 94.301] compiled for 1.11.3, module version = 1.0.0
[ 94.301] ABI class: X.Org Server Extension, version 6.0
[ 94.301] (==) AIGLX enabled
[ 94.301] (II) Loading extension GLX
[ 94.301] (II) LoadModule: "extmod"
[ 94.301] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 94.368] (II) Module extmod: vendor="X.Org Foundation"
[ 94.368] compiled for 1.11.3, module version = 1.0.0
[ 94.368] Module class: X.Org Server Extension
[ 94.368] ABI class: X.Org Server Extension, version 6.0
[ 94.368] (II) Loading extension MIT-SCREEN-SAVER
[ 94.368] (II) Loading extension XFree86-VidModeExtension
[ 94.368] (II) Loading extension XFree86-DGA
[ 94.531] (II) Loading extension DPMS
[ 94.532] (II) Loading extension XVideo
[ 94.532] (II) Loading extension XVideo-MotionCompensation
[ 94.532] (II) Loading extension X-Resource
[ 94.532] (II) LoadModule: "dbe"
[ 94.532] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 94.549] (II) Module dbe: vendor="X.Org Foundation"
[ 94.549] compiled for 1.11.3, module version = 1.0.0
[ 94.549] Module class: X.Org Server Extension
[ 94.549] ABI class: X.Org Server Extension, version 6.0
[ 94.549] (II) Loading extension DOUBLE-BUFFER
[ 94.549] (II) LoadModule: "record"
[ 94.549] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 94.592] (II) Module record: vendor="X.Org Foundation"
[ 94.592] compiled for 1.11.3, module version = 1.13.0
[ 94.592] Module class: X.Org Server Extension
[ 94.592] ABI class: X.Org Server Extension, version 6.0
[ 94.592] (II) Loading extension RECORD
[ 94.592] (II) LoadModule: "dri"
[ 94.592] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 94.765] (II) Module dri: vendor="X.Org Foundation"
[ 94.765] compiled for 1.11.3, module version = 1.0.0
[ 94.765] ABI class: X.Org Server Extension, version 6.0
[ 94.765] (II) Loading extension XFree86-DRI
[ 94.765] (II) LoadModule: "dri2"
[ 94.766] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 94.831] (II) Module dri2: vendor="X.Org Foundation"
[ 94.831] compiled for 1.11.3, module version = 1.2.0
[ 94.831] ABI class: X.Org Server Extension, version 6.0
[ 94.831] (II) Loading extension DRI2
[ 94.831] (II) LoadModule: "nvidia"
[ 94.831] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 96.411] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 96.411] compiled for 4.0.2, module version = 1.0.0
[ 96.411] Module class: X.Org Video Driver
[ 96.508] (II) NVIDIA dlloader X Driver 340.65 Tue Dec 2 08:39:49 PST 2014
[ 96.508] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 96.552] (++) using VT number 7
[ 96.609] (II) Loading sub module "fb"
[ 96.609] (II) LoadModule: "fb"
[ 96.610] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 96.705] (II) Module fb: vendor="X.Org Foundation"
[ 96.705] compiled for 1.11.3, module version = 1.0.0
[ 96.705] ABI class: X.Org ANSI C Emulation, version 0.4
[ 96.705] (II) Loading sub module "wfb"
[ 96.705] (II) LoadModule: "wfb"
[ 96.705] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 97.445] (II) Module wfb: vendor="X.Org Foundation"
[ 97.445] compiled for 1.11.3, module version = 1.0.0
[ 97.445] ABI class: X.Org ANSI C Emulation, version 0.4
[ 97.445] (II) Loading sub module "ramdac"
[ 97.445] (II) LoadModule: "ramdac"
[ 97.445] (II) Module "ramdac" already built-in
[ 97.504] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 97.504] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 97.504] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 97.504] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 97.504] (==) NVIDIA(0): RGB weight 888
[ 97.504] (==) NVIDIA(0): Default visual is TrueColor
[ 97.504] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 97.530] (**) NVIDIA(0): Option "NoLogo" "True"
[ 97.531] (**) NVIDIA(0): Enabling 2D acceleration
[ 97.531] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 97.531] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 97.531] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 97.531] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 97.531] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 98.910] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
[ 98.938] drmOpenDevice: node name is /dev/dri/card0
[ 98.942] drmOpenByBusid: Searching for BusID PCI:1:0:0
[ 98.942] drmOpenDevice: node name is /dev/dri/card0
[ 98.946] drmOpenByBusid: drmOpenMinor returns -1
[ 98.946] drmOpenDevice: node name is /dev/dri/card1
[ 98.950] drmOpenByBusid: drmOpenMinor returns -1
[ 98.957] drmOpenDevice: node name is /dev/dri/card2
[ 98.961] drmOpenByBusid: drmOpenMinor returns -1
[ 98.961] drmOpenDevice: node name is /dev/dri/card3
[ 98.965] drmOpenByBusid: drmOpenMinor returns -1
[ 98.965] drmOpenDevice: node name is /dev/dri/card4
[ 98.968] drmOpenByBusid: drmOpenMinor returns -1
[ 98.968] drmOpenDevice: node name is /dev/dri/card5
[ 98.972] drmOpenByBusid: drmOpenMinor returns -1
[ 98.972] drmOpenDevice: node name is /dev/dri/card6
[ 98.976] drmOpenByBusid: drmOpenMinor returns -1
[ 98.976] drmOpenDevice: node name is /dev/dri/card7
[ 98.980] drmOpenByBusid: drmOpenMinor returns -1
[ 98.980] drmOpenDevice: node name is /dev/dri/card8
[ 98.984] drmOpenByBusid: drmOpenMinor returns -1
[ 98.984] drmOpenDevice: node name is /dev/dri/card9
[ 98.988] drmOpenByBusid: drmOpenMinor returns -1
[ 98.988] drmOpenDevice: node name is /dev/dri/card10
[ 98.992] drmOpenByBusid: drmOpenMinor returns -1
[ 98.992] drmOpenDevice: node name is /dev/dri/card11
[ 98.996] drmOpenByBusid: drmOpenMinor returns -1
[ 98.996] drmOpenDevice: node name is /dev/dri/card12
[ 99.000] drmOpenByBusid: drmOpenMinor returns -1
[ 99.000] drmOpenDevice: node name is /dev/dri/card13
[ 99.004] drmOpenByBusid: drmOpenMinor returns -1
[ 99.004] drmOpenDevice: node name is /dev/dri/card14
[ 99.008] drmOpenByBusid: drmOpenMinor returns -1
[ 99.008] drmOpenDevice: node name is /dev/dri/card15
[ 99.011] drmOpenByBusid: drmOpenMinor returns -1
[ 99.059] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
[ 99.059] (--) NVIDIA(0): Memory: 524288 kBytes
[ 99.059] (--) NVIDIA(0): VideoBIOS: 62.94.0d.00.02
[ 99.059] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 99.062] (--) NVIDIA(0): Valid display device(s) on GeForce 9600 GT at PCI:1:0:0
[ 99.062] (--) NVIDIA(0): CRT-0 (boot, connected)
[ 99.062] (--) NVIDIA(0): CRT-1
[ 99.062] (--) NVIDIA(0): TV-0
[ 99.062] (--) NVIDIA(0): DFP-0
[ 99.062] (--) NVIDIA(0): DFP-1
[ 99.062] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 99.062] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 99.062] (--) NVIDIA(GPU-0): TV-0: 400.0 MHz maximum pixel clock
[ 99.062] (--) NVIDIA(0): DFP-0: Internal TMDS
[ 99.062] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 99.062] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 99.062] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 99.062] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 99.062] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 99.062] (**) NVIDIA(0): all display devices.)
[ 99.067] (II) NVIDIA(0): Validated MetaModes:
[ 99.067] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 99.067] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 99.090] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 99.090] (WW) NVIDIA(0): from CRT-0's EDID.
[ 99.090] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 99.090] (--) Depth 24 pixmap format is 32 bpp
[ 99.090] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 99.098] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 99.333] (II) Loading extension NV-GLX
[ 99.716] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 99.716] (==) NVIDIA(0): Backing store disabled
[ 99.716] (==) NVIDIA(0): Silken mouse enabled
[ 99.716] (==) NVIDIA(0): DPMS enabled
[ 99.716] (II) Loading extension NV-CONTROL
[ 99.716] (II) Loading extension XINERAMA
[ 99.716] (II) Loading sub module "dri2"
[ 99.716] (II) LoadModule: "dri2"
[ 99.717] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 99.717] (II) Module dri2: vendor="X.Org Foundation"
[ 99.717] compiled for 1.11.3, module version = 1.2.0
[ 99.717] ABI class: X.Org Server Extension, version 6.0
[ 99.717] (II) NVIDIA(0): [DRI2] Setup complete
[ 99.717] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 99.717] (--) RandR disabled
[ 99.717] (II) Initializing built-in extension Generic Event Extension
[ 99.717] (II) Initializing built-in extension SHAPE
[ 99.717] (II) Initializing built-in extension MIT-SHM
[ 99.717] (II) Initializing built-in extension XInputExtension
[ 99.717] (II) Initializing built-in extension XTEST
[ 99.717] (II) Initializing built-in extension BIG-REQUESTS
[ 99.717] (II) Initializing built-in extension SYNC
[ 99.717] (II) Initializing built-in extension XKEYBOARD
[ 99.717] (II) Initializing built-in extension XC-MISC
[ 99.717] (II) Initializing built-in extension SECURITY
[ 99.717] (II) Initializing built-in extension XINERAMA
[ 99.717] (II) Initializing built-in extension XFIXES
[ 99.717] (II) Initializing built-in extension RENDER
[ 99.717] (II) Initializing built-in extension RANDR
[ 99.717] (II) Initializing built-in extension COMPOSITE
[ 99.717] (II) Initializing built-in extension DAMAGE
[ 99.732] (II) AIGLX: Screen 0 is not DRI2 capable
[ 99.732] (II) AIGLX: Screen 0 is not DRI capable
[ 103.525] (II) AIGLX: Loaded and initialized swrast
[ 103.525] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 104.324] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 104.353] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 104.353] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 104.353] (II) LoadModule: "evdev"
[ 104.385] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 104.485] (II) Module evdev: vendor="X.Org Foundation"
[ 104.485] compiled for 1.11.3, module version = 2.7.0
[ 104.485] Module class: X.Org XInput Driver
[ 104.485] ABI class: X.Org XInput driver, version 16.0
[ 104.485] (II) Using input driver 'evdev' for 'Power Button'
[ 104.485] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 104.485] (**) Power Button: always reports core events
[ 104.485] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 104.485] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 104.485] (--) evdev: Power Button: Found keys
[ 104.485] (II) evdev: Power Button: Configuring as keyboard
[ 104.485] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 104.485] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 104.485] (**) Option "xkb_rules" "evdev"
[ 104.485] (**) Option "xkb_model" "pc105"
[ 104.485] (**) Option "xkb_layout" "fr"
[ 104.485] (**) Option "xkb_variant" "oss"
[ 104.491] (II) XKB: reuse xkmfile /var/lib/xkb/server-6CCE7350BC740BB33D520367F4A10E64192A358C.xkm
[ 104.499] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 104.499] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 104.499] (II) Using input driver 'evdev' for 'Power Button'
[ 104.499] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 104.499] (**) Power Button: always reports core events
[ 104.499] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 104.499] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 104.499] (--) evdev: Power Button: Found keys
[ 104.499] (II) evdev: Power Button: Configuring as keyboard
[ 104.499] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 104.499] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 104.499] (**) Option "xkb_rules" "evdev"
[ 104.500] (**) Option "xkb_model" "pc105"
[ 104.500] (**) Option "xkb_layout" "fr"
[ 104.500] (**) Option "xkb_variant" "oss"
[ 104.501] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event2)
[ 104.501] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 104.501] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 104.501] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 104.501] (**) Logitech USB Keyboard: always reports core events
[ 104.501] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event2"
[ 104.501] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 104.501] (--) evdev: Logitech USB Keyboard: Found keys
[ 104.501] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 104.501] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input2/event2"
[ 104.501] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 8)
[ 104.501] (**) Option "xkb_rules" "evdev"
[ 104.501] (**) Option "xkb_model" "pc105"
[ 104.501] (**) Option "xkb_layout" "fr"
[ 104.501] (**) Option "xkb_variant" "oss"
[ 104.502] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event3)
[ 104.502] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 104.502] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 104.502] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 104.502] (**) Logitech USB Keyboard: always reports core events
[ 104.502] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event3"
[ 104.502] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 104.502] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 104.502] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 104.502] (--) evdev: Logitech USB Keyboard: Found keys
[ 104.502] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 104.502] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 104.503] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.1/input/input3/event3"
[ 104.503] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 104.503] (**) Option "xkb_rules" "evdev"
[ 104.503] (**) Option "xkb_model" "pc105"
[ 104.503] (**) Option "xkb_layout" "fr"
[ 104.503] (**) Option "xkb_variant" "oss"
[ 104.503] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[ 104.503] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 104.503] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 104.503] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 104.503] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 104.504] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event4)
[ 104.504] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 104.504] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 104.504] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 104.504] (**) USB Optical Mouse: always reports core events
[ 104.504] (**) evdev: USB Optical Mouse: Device: "/dev/input/event4"
[ 104.504] (--) evdev: USB Optical Mouse: Vendor 0x4f2 Product 0x939
[ 104.504] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 104.504] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 104.504] (--) evdev: USB Optical Mouse: Found relative axes
[ 104.504] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 104.504] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 104.504] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 104.504] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 104.504] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 104.504] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input4/event4"
[ 104.504] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[ 104.504] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 104.505] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 104.505] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 104.505] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 104.505] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 104.505] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 104.505] (II) No input driver specified, ignoring this device.
[ 104.505] (II) This device may have been added with another device file.
[ 104.506] (II) config/udev: Adding input device HDA Intel Line-Out CLFE (/dev/input/event10)
[ 104.506] (II) No input driver specified, ignoring this device.
[ 104.506] (II) This device may have been added with another device file.
[ 104.506] (II) config/udev: Adding input device HDA Intel Line-Out Surround (/dev/input/event11)
[ 104.506] (II) No input driver specified, ignoring this device.
[ 104.506] (II) This device may have been added with another device file.
[ 104.506] (II) config/udev: Adding input device HDA Intel Line-Out Front (/dev/input/event12)
[ 104.506] (II) No input driver specified, ignoring this device.
[ 104.506] (II) This device may have been added with another device file.
[ 104.507] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event5)
[ 104.507] (II) No input driver specified, ignoring this device.
[ 104.507] (II) This device may have been added with another device file.
[ 104.507] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[ 104.507] (II) No input driver specified, ignoring this device.
[ 104.507] (II) This device may have been added with another device file.
[ 104.508] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[ 104.508] (II) No input driver specified, ignoring this device.
[ 104.508] (II) This device may have been added with another device file.
[ 104.508] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event8)
[ 104.508] (II) No input driver specified, ignoring this device.
[ 104.508] (II) This device may have been added with another device file.
[ 104.509] (II) config/udev: Adding input device HDA Intel Line-Out Side (/dev/input/event9)
[ 104.509] (II) No input driver specified, ignoring this device.
[ 104.509] (II) This device may have been added with another device file.
[ 108.951] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 111.999] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 118.050] (II) XKB: reuse xkmfile /var/lib/xkb/server-42767921B173F649B334DB1B557B01E58476E845.xkm
[ 126.642] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 127.033] (II) NVIDIA(0): Setting mode "DVI-I-0: 1360x768 @1360x768 +0+0 {ViewPortIn=1360x768, ViewPortOut=1360x768+0+0}"
[ 128.062] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 130.362] (II) XKB: reuse xkmfile /var/lib/xkb/server-42767921B173F649B334DB1B557B01E58476E845.xkm
[ 153.127] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0/var/log/boot.log :
fsck from util-linux 2.20.1
fsck from util-linux 2.20.1
fsck from util-linux 2.20.1
fsck from util-linux 2.20.1
fsck from util-linux 2.20.1
Systeme: clean, 463609/3190560 files, 7775296/12799780 blocks
home: recovering journal
usr: recovering journal
Sites: recovering journal
Stockage: recovering journal
Sites has been mounted 23 times without being checked, check forced.
Stockage: clean, 784/25600000 files, 41561203/102400000 blocks (check in 2 mounts)
User cancelled filesystem checks
Sites: e2fsck canceled.
mountall: fsck /media/sites [445] terminated with status 32
usr: clean, 1707875/3522560 files, 4990122/14078956 blocks
home: Clearing orphaned inode 7430358 (uid=1000, gid=1000, mode=0100600, size=1)
home: Clearing orphaned inode 7430357 (uid=1000, gid=1000, mode=0100664, size=8086)
home: Clearing orphaned inode 7430355 (uid=1000, gid=1000, mode=0100600, size=1)
home: Clearing orphaned inode 7430353 (uid=1000, gid=1000, mode=0100664, size=8110)
home: Clearing orphaned inode 7430294 (uid=1000, gid=1000, mode=0100664, size=8110)
home: Clearing orphaned inode 7430252 (uid=1000, gid=1000, mode=0100600, size=1)
home: Clearing orphaned inode 7430218 (uid=1000, gid=1000, mode=0100664, size=8110)
home: Clearing orphaned inode 7430293 (uid=1000, gid=1000, mode=0100600, size=1)
home: Clearing orphaned inode 7430351 (uid=1000, gid=1000, mode=0100664, size=8110)
home: Clearing orphaned inode 7454940 (uid=1000, gid=1000, mode=0100664, size=32768)
home: Clearing orphaned inode 7454918 (uid=1000, gid=1000, mode=0100600, size=56)
home: Clearing orphaned inode 7454947 (uid=1000, gid=1000, mode=0100664, size=32768)
home: Clearing orphaned inode 7454903 (uid=1000, gid=1000, mode=0100600, size=188)
home: Clearing orphaned inode 7430285 (uid=1000, gid=1000, mode=0100664, size=8110)
home: Clearing orphaned inode 7430286 (uid=1000, gid=1000, mode=0100664, size=8110)
home: Clearing orphaned inode 7430254 (uid=1000, gid=1000, mode=0100664, size=8134)
home: Clearing orphaned inode 7430250 (uid=1000, gid=1000, mode=0100664, size=8134)
home: Clearing orphaned inode 7430247 (uid=1000, gid=1000, mode=0100600, size=1)
home: Clearing orphaned inode 7430248 (uid=1000, gid=1000, mode=0100664, size=8134)
home: Clearing orphaned inode 7430228 (uid=1000, gid=1000, mode=0100664, size=8110)
home: Clearing orphaned inode 7430207 (uid=1000, gid=1000, mode=0100664, size=8110)
home: Clearing orphaned inode 7430211 (uid=1000, gid=1000, mode=0100664, size=8110)
home: Clearing orphaned inode 7430191 (uid=1000, gid=1000, mode=0100664, size=8110)
home: Clearing orphaned inode 7430241 (uid=1000, gid=1000, mode=0100600, size=1)
home: Clearing orphaned inode 7430237 (uid=1000, gid=1000, mode=0100664, size=8110)
home: Clearing orphaned inode 7430210 (uid=1000, gid=1000, mode=0100600, size=1)
home: Clearing orphaned inode 7430208 (uid=1000, gid=1000, mode=0100664, size=8040)
home: Clearing orphaned inode 7430244 (uid=1000, gid=1000, mode=0100600, size=1)
home: Clearing orphaned inode 7430238 (uid=1000, gid=1000, mode=0100664, size=8040)
home: clean, 298220/25600000 files, 54834860/102400000 blocks (check after next mount)
Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
* Starting AppArmor profiles [80G
[74G[ OK ]
* Setting sensors limits [80G
[74G[ OK ]
Not starting as we're not running in a vm.
[31m*[39;49m /usr/sbin/sogod is not executable.
speech-dispatcher disabled; edit /etc/default/speech-dispatcherDernière modification par Jarodd (Le 14/06/2015, à 19:26)
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#12 Le 15/06/2015, à 00:37
- moko138
Re : [Résou] Affichage "cassé", démarrage impossible
N'étant PAS un spécialiste du graphique, je ne peux pas te dire si tu as bien fait d'installer le module nVidia 340.65 pour une carte GeForce 9600 GT, sur une Xubuntu 12.04.
Mais je peux te dire
- que ce pilote a du mal à gérer ton écran cathodique (CRT), comme le montre :
[ 98.910] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0donc que tu pourrais déjà essayer avec un autre écran.
- que ton système n'est pas à jour et que tu peux le mettre à jour en console.
Ctrl Alt F1 puis
sudo apt-get update
sudo apt-get dist-upgrade- qu'annuler la vérification automatique d'un de tes systèmes de fichiers (FS)
User cancelled filesystem checks
Sites: e2fsck canceled.
mountall: fsck /media/sites [445] terminated with status 32était une c*nnerie.
- que ton installation semble ancienne puisqu'en ext3, et que tu devrais vérifier en live l'état de ton disque :
sudo apt-get install smartmontoolssudo smartctl -a /dev/sdadont tu colleras le retour complet ici.
Ce point étant prioritaire parce que si ton disque en est à rater une partie de ses lectures ou écritures, la seule chose à faire est de sauver les meubles sur DDE, avant dégradation supplémentaire.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#13 Le 15/06/2015, à 08:52
- Jarodd
Re : [Résou] Affichage "cassé", démarrage impossible
Bonjour,
moko138 a écrit :
je ne peux pas te dire si tu as bien fait d'installer le module nVidia 340.65 pour une carte GeForce 9600 GT, sur une Xubuntu 12.04.
Je ne sais pas si cela a une influence mais j'ai Ubuntu, pas Xubuntu L'installation de ce driver a été fait suite à un autre souci (voir ici, post #23 et suivants).
D'ailleurs à partir de quand le driver est utilisé ? L'affichage déraille parfois dès le BIOS ou le chargement du système (écran noir avec tous les logs qui défilent).
- que ce pilote a du mal à gérer ton écran cathodique (CRT), comme le montre :
que tu pourrais déjà essayer avec un autre écran.
Ecran CRT ? Je n'en ai plus depuis 2008 
J'utilise un écran plat Hyundai 22". Je suis en train de tester avec un autre écran (qui a 1 an et fonctionne bien), le souci d'affichage est toujours présent. Ca a déraillé pendant l'étape du boot (quand le BIOS vérifie si j'ai inséré un CD pour démarrer dessus ou s'il doit booter sur le DD).
- que ton système n'est pas à jour et que tu peux le mettre à jour en console.
Ca c'est ok. J'ai lancé les commandes avant de pouvoir faire la màj (voir post #6). C'est juste que je n'avais pas réussi à récupérer le contenu des commandes pour les poster ici (j'ai réussi hier soir, la màj faite dans l'aprèm).
- qu'annuler la vérification automatique d'un de tes systèmes de fichiers (FS) était une c*nnerie.
Vérif annulée exceptionellement (je les ai toutes faites depuis que j'ai Ubuntu) : elle prend environ 10mn, et ces derniers temps l'affichage est correct pendant 2 ou 3 mn, j'ai donc essayé d'aller au plus vite pour faire les tests avant que l'affichage foire à nouveau.
- que ton installation semble ancienne puisqu'en ext3, et que tu devrais vérifier en live l'état de ton disque :
sudo apt-get install smartmontoolssudo smartctl -a /dev/sdadont tu colleras le retour complet ici.
Ce point étant prioritaire parce que si ton disque en est à rater une partie de ses lectures ou écritures, la seule chose à faire est de sauver les meubles sur DDE, avant dégradation supplémentaire.
Je vais lancer ces commandes au plus vite. D'après toi l'origine du problème serait donc un disque défectueux ?
Merci pour ces conseils
Edit : ça a déraillé dès le début (BIOS) ce matin, voilà l'écan du checkdisk (sur le second écran, pour les tests) : https://framapic.org/apgRXewzHbxF/txQ1iKvJ (désolé pas le temps de redimensionner)
Edit 2 : j'ai installé smartmontools et lancé la commande. Le résultat est dans un fichier texte, j'essaye de le poster à midi
Dernière modification par Jarodd (Le 15/06/2015, à 09:07)
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#14 Le 15/06/2015, à 10:54
- godverdami
Re : [Résou] Affichage "cassé", démarrage impossible
Si tu as un connecteur VGA directement sur la carte mère, enlève la carte graphique et connecte l'écran sur la carte mère et vois si ça le fait aussi
%NOINDEX%
Un peuple prêt à sacrifier un peu de liberté pour un peu de sécurité ne mérite ni l'une ni l'autre, et finit par perdre les deux.
Bonux lave plus blanc
Hors ligne
#15 Le 15/06/2015, à 12:01
- moko138
Re : [Résou] Affichage "cassé", démarrage impossible
Le pilote graphique, en effet, est chargé avec le S.E., donc bien après le bios.
godverdami a écrit :
Si tu as un connecteur VGA directement sur la carte mère, enlève la carte graphique et connecte l'écran sur la carte mère et vois si ça le fait aussi
Bonne idée !
Jarodd a écrit :
Vérif annulée exceptionnellement (je les ai toutes faites depuis que j'ai Ubuntu) : elle prend environ 10mn
Aïe ! 10 minutes ça me paraît énorme pour une vérification faite tous les 23 ou 30 montages.
Ton pc a peut-être plus d'un problème.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#16 Le 15/06/2015, à 19:31
- Jarodd
Re : [Résou] Affichage "cassé", démarrage impossible
Elle a toujours été longue, le disque dur fait 1 To donc cela ne m'a jamais choqué.
Je n'ai pas vu de connecteur VGA directement sur la carte-mère
Est-ce que cela peut venir de la RAM ? De l'alim ? Il y a des outils pour faire des tests sur le matériel ?
Dernière modification par Jarodd (Le 15/06/2015, à 19:31)
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#17 Le 15/06/2015, à 21:30
- moko138
Re : [Résou] Affichage "cassé", démarrage impossible
Pour la ram, tu as memtest, dans ton grub ou en session live.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#18 Le 15/06/2015, à 21:43
- moko138
Re : [Résou] Affichage "cassé", démarrage impossible
9 inoeuds défectueux dans sda1 (ta racine ?)
29 inoeuds défectueux, dans ton home,
et on ne sait pas combien dans "Sites" ;
je t'ai demandé smartctl et tu ne l'as pas donné.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#19 Le 18/06/2015, à 20:37
- Jarodd
Re : [Résou] Affichage "cassé", démarrage impossible
Pas donné pour la simple raison que je n'arrive pas à lancer les commandes, l'affichage foire avant et je ne vois pas ce que je fais ! Même la session live échoue trop tôt Et j'ai bien vérifié, pas de trace de memtest au démarrage (j'ai même vérifié dans les "previous versions" du noyau).
Que faut-il conclure des « inoeuds défectueux » ? Ca peut avoir une incidence sur mon problème d'affichage ? Un moyen de le corriger ?
Dernière modification par Jarodd (Le 18/06/2015, à 20:39)
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#20 Le 19/06/2015, à 19:40
- moko138
Re : [Résou] Affichage "cassé", démarrage impossible
Si tu veux avancer, comme il est très possible que tu aies un problème de disque EN PLUS d'un autre problème matériel, on va sérier les problème :
1) oublie ta tour pour le moment, extrais-en ton disque.
2) Ensuite, tu vas le brancher en tant que disque secondaire à un autre ordi.
Dans l'idéal, directement sur une nappe Sata (celle du lecteur de dvd, si tu n'en as pas d'autres sous la main).
Au pire, dans un boîtier ou autre adaptateur, mais je te le déconseille dans ton cas, parce que ça compliquerait la suite.
3) Tu démarres sur un linux à jour (à défaut sur une live),
3.1) tu vois si tes données semblent accessibles et si oui, sauvegarde immédiatement ce qui peut l'être, de tes données et du /var/log de ton disque devenu secondaire,
3.2) et tu donnes les données smart de ton disque.
PS : si tu te fais prêter une vieille tour (ce qui serait très bien), alors emploie une live légère en 32 bits et à noyau 3.2 (Xubuntu 12.04.4 ou Lubuntu12.04.1), parce que les noyaux postérieurs ne prennent pas en charge les cartes graphiques anciennes.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#21 Le 19/07/2015, à 13:29
- Jarodd
Re : [Résou] Affichage "cassé", démarrage impossible
Hello,
Je vais pouvoir me lancer dans ce dépannage dans les prochains jours (vive les congés).
1/ Que sont les données « smart » ?
2/ Le but de la manoeuvre (à part la sauvegarde) est-elle la réinstallation d'un système ? Car si c'est un problème matériel, cela risque d'être inutile non ?
Je vais faire la 1e méthode (DD en SATA) car je n'ai pas la possibilité d'avoir une tour de dépannage.
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#22 Le 19/07/2015, à 19:55
- moko138
Re : [Résou] Affichage "cassé", démarrage impossible
Smart : état physique du disque.
2.b) C'est bien pour ça que je te demande les données smart...
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#23 Le 09/08/2015, à 20:37
- Jarodd
Re : [Résou] Affichage "cassé", démarrage impossible
De retour, avec enfin un peu de temps pour tout faire
1/ J'ai démonté mes 2 disques durs et fait les sauvegardes du plus urgent.
2/ Mon /var/log fait plus de 10 Go. Faut-il TOUT sauvegarder ? Ou sinon quels répertoires/fichiers sont nécessaires en priorité ?
3/ J'ai installé smartontools, J'ai tenté de faire un smartctl -a pour avoir toutes les infos (et ceci sur chaque partition du disque dur). Mais cela ne fonctionne pas :
$ sudo smartctl -a /dev/sdb1
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-45-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: ST310003
Product: 40AS
User Capacity: 1 000 203 804 160 bytes [1,00 TB]
Logical block size: 512 bytes
Serial number: 152D20337A0C
Device type: disk
Local Time is: Sun Aug 9 21:00:48 2015 CEST
SMART support is: Unavailable - device lacks SMART capability.
=== START OF READ SMART DATA SECTION ===
Error Counter logging not supported
Device does not support Self Test loggingApparemment pas de SMART pour ce disque. Que puis-je tenter d'autre ?
Merci pour le coup de main
Dernière modification par Jarodd (Le 09/08/2015, à 21:03)
Ubuntu 22.04.3 LTS (64 bits)
Hors ligne
#24 Le 09/08/2015, à 22:03
- moko138
Re : [Résou] Affichage "cassé", démarrage impossible
sudo smartctl -a /dev/sdbsans nombre.Smart ne s'intéresse pas aux partitions ni à leurs systèmes de fichiers (ça, c'est le travail de fsck), mais uniquement à l'état matériel des HD entiers.
les sauvegardes du plus urgent
Bien mais n'oublie pas l'important dans tes données.
Le contenu de /var/log ne contient pas tes données persos et ne te servira que pour le diagnostic.
Tu peux garder dmesg, kern.log et syslog.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#25 Le 09/08/2015, à 22:18
- moko138
Re : [Résou] Affichage "cassé", démarrage impossible
garde aussi boot, boot.log et le Xorg.0.log.
Fais l'effort de relire le fil !
et puis monte toutes tes partitions et donne
df -het
df -iparce que, en #6, "no ?ha?e available", est peut-être l'affichage de "no space available".
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne