#26 Le 26/06/2015, à 18:22
- sebas1
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Erreur commande fdisk ––> sudo fdisk -l :
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.
Disk /dev/sda: 128.0 GB, 128035676160 bytes
255 têtes, 63 secteurs/piste, 15566 cylindres, total 250069680 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x00000000
Périphérique Amorçage Début Fin Blocs Id. Système
/dev/sda1 1 250069679 125034839+ ee GPT
Hors ligne
#27 Le 26/06/2015, à 18:45
- sebas1
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
J'ai relancé l'ordi et cette fois le sdb de 2To est reconnu et il est même accessible depuis unity. Formidable.
Du coup sudo fdisk -l donne :
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.
Disk /dev/sda: 128.0 GB, 128035676160 bytes
255 têtes, 63 secteurs/piste, 15566 cylindres, total 250069680 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x00000000
Périphérique Amorçage Début Fin Blocs Id. Système
/dev/sda1 1 250069679 125034839+ ee GPT
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sdb » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.
Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
255 têtes, 63 secteurs/piste, 243201 cylindres, total 3907029168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Identifiant de disque : 0x00000000
Périphérique Amorçage Début Fin Blocs Id. Système
/dev/sdb1 1 3907029167 1953514583+ ee GPT
La partition 1 ne commence pas sur une frontière de cylindre physique.
Est-il préférable que je nettoie le SSD ou ... que je recommence une install. ?
Hors ligne
#28 Le 26/06/2015, à 18:47
- maxire
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
C'est bon, c'est bien installé en UEFI, par contre je suis surpris que les anciennes partitions soient toujours présentes.
J'avoue n'avoir jamais testé la procédure d'installation sur un Ubuntu déjà présent avec écrasement de celui-ci, en mode uefi.
Un bug peut-être, seul le sage malbo pourrait nous éclairer de sa lumière.
Il vaut mieux recommencer et supprimer toutes les partitions à partir du live dvd/usb en utilisant gparted.
Si tu n'arrives pas à lancer une session live dvd/usb en mode uefi tu la lances en mode Legacy, je crois qu'en mode uefi celle-ci est parfois réticente à démarrer.
Ne t'inquiètes pas pour le disque de 2TO, tu le retrouveras.
Sur ce je vous laisse pour la soirée, il fait trop beau pour rester planté devant un écran.
Note: avec des tables de partitions GPT ne pas utiliser fdisk sous Ubuntu 14.04 mais plutôt parted, la version de fdisk livrée ne sait pas traiter ces tables.
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#29 Le 27/06/2015, à 12:05
- sebas1
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Réinstallation faite.
1) Effectivement impossible de lancer le Live CD en UEFI. J'ai du rentrer dans le "bios" pour mettre en mode "legacy". Il ne faut pas non plus oublier de mettre le lecteur du live cd en boot prioiritaire (en haut sur la liste déroulante). Sinon ça ne marche pas non plus.
2) Suppression des partitions de l'installation du SSD à partir du live cd et de gparted.
3) Je suis de nouveau rentrer dans le menu bios pour remettre en UEFI.
4) Réinstallation dont voici les détails :
Commande sudo parted -l et non sudo gparted -l comme j'ai indiqué dans le #9 donne :
Modèle: ATA Samsung SSD 840 (scsi)
Disque /dev/sda : 128GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : gpt
Numéro Début Fin Taille Système de fichiers Nom Fanions
1 1049kB 538MB 537MB fat32 démarrage
2 538MB 120GB 119GB ext4
3 120GB 128GB 8464MB
Pour ceux qui préfèrent les images
Je ne comprends pas à quoi correspond le numéro 3 d'autant plus que sur l'image il y a un beau point d'exclamation rouge. Mais enfin ça à l'air plus propre que précédemment.
Le rapport boot info
Dans un post précédent tu me demandais (Maxire) quelle erreur lors des deux premières tentatives. Malheureusement je ne me souviens plus très bien mais c'était un message très bref de type : fatal error, unable to continue merci au revoir.
Cependant en fouillant dans le menu «bios» de ma carte mère gigabyte H87N-WIFI je me suis aperçu qu'elle était réglée en dual boot soit à la fois UEFI et BIOS. Ce qui, me semble-t-il, pourrait ếtre à l'origine des plantages.
Voilà il ne me reste plus qu'à chercher comment configurer mon HDD Data àvec le SSD et voir un peu si c'est intéressant de faire une partition pour tous ces fichies temporaires sur le HDD.
Je crois que je vais pouvoir mettre en résolu. Il n'y a que cette partition 3 qui me questionne encore.
Merci à tous ceux qui sont intervenus pour m'aider et bon w-e qui s'annonce effectivement très ensoleillé.
Hors ligne
#30 Le 27/06/2015, à 12:36
- nany
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Il n'y a que cette partition 3 qui me questionne encore.
Extrait de ton fstab dans le dernier rapport boot-info :
# swap was on /dev/sda3 during installation
#UUID=984c8085-b59d-4f63-88b2-9a5428ec8a8a none swap sw 0 0
/dev/mapper/cryptswap1 none swap sw 0 0
Je dirais que l’installateur, dans sons processus d’automatisation, crée une partition swap.
Puis, peut-être parce qu’il s’agit d’un SSD, il a décidé de mettre un /dev/mapper/cryptswap1 dans le fstab.
Quant à savoir d’où sort ce /dev/mapper/cryptswap1, je dois avouer que cela dépasse mes compétences.
Le nom me laisse à penser qu’il s’agit d’un swap chiffré.
Peut-être correspond-il à ta partition sda3, ce qui expliquerait le point d’exclamation dans gparted car cette partition serait alors chiffrée et donc non lisible par gparted.
Tout ceci n’étant que des suppositions de ma part et demande confirmation ou infirmation par un expert en la matière.
Hors ligne
#31 Le 27/06/2015, à 12:55
- sebas1
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Merci nany
Est-ce que ça veut dire que je peux essayer de supprimer ce sda3 (si c'est du swap) étant donné que j'ai 8G de ram ?
Hors ligne
#32 Le 27/06/2015, à 13:24
- nany
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Tu peux en effet essayer mais je ne sais pas si c’est possible à cause ce fichu point d’exclamation.
En tout cas, avant d’essayer, passe d’abord la commande suivante pour désactiver le swap :
sudo swapoff -a
Ensuite, commente la dernière ligne de ton fstab (tu sais maintenant, en mettant un croisillon (qui ne sert pas que pour la décoration ) en début de ligne).
Dernière modification par nany (Le 27/06/2015, à 13:24)
Hors ligne
#33 Le 27/06/2015, à 16:41
- sebas1
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
En fait si c'était possible.
Le nouveau sudo parted -l :
Disque /dev/sda : 128GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : gpt
Numéro Début Fin Taille Système de fichiers Nom Fanions
1 1049kB 538MB 537MB fat32 démarrage
2 538MB 120GB 119GB ext4
Je me retrouve avec 8 GB non alloué mais pour l'instant c'est pas trop grave.
Mon nouveau boot info
Dont la partie fstab :
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=4E59-7516 /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
#UUID=984c8085-b59d-4f63-88b2-9a5428ec8a8a none swap sw 0 0
/dev/mapper/cryptswap1 none swap sw 0 0
--------------------------------------------------------------------------------
Déjà je comprends pas pourquoi le swap est toujours là (en sda3) alors que je l'ai supprimé puis redémarré.
Je comprends pas le pourquoi de ta dernière phrase. Je dois mettre un « # »devant « /dev/mapper/cryptswap1 none swap sw 0 0 » pour «commenter» la ligne mais pourquoi ? D'autant plus que le swap ne devrait plus y être.
Hors ligne
#34 Le 27/06/2015, à 17:21
- maxire
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Hum, je ne connais pas vraiment le chiffrage des swaps, mais j'ai comme l'impression que la chose est gérée pas lvm, le swao est-il réellement inactif?
Que donne:
swapon -s
?
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#35 Le 27/06/2015, à 17:47
- sebas1
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
swapon -s :
Filename Type Size Used Priority
Hors ligne
#36 Le 27/06/2015, à 18:00
- maxire
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Bon la swap a bien été supprimée.
Supprimes ou commentes la ligne relative à la swap dans /etc/fstab.
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#37 Le 27/06/2015, à 18:18
- sebas1
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
D'accord mais je l'appelle comment le fichier fstab ?
Je supprime ces trois lignes ?
# swap was on /dev/sda3 during installation
#UUID=984c8085-b59d-4f63-88b2-9a5428ec8a8a none swap sw 0 0
/dev/mapper/cryptswap1 none swap
Hors ligne
#38 Le 27/06/2015, à 23:14
- Babdu89
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Bonsoir.
D'accord mais je l'appelle comment le fichier fstab ?
Je supprime ces trois lignes ?# swap was on /dev/sda3 during installation #UUID=984c8085-b59d-4f63-88b2-9a5428ec8a8a none swap sw 0 0 /dev/mapper/cryptswap1 none swap
Soit tu mets un dièse ( # ) devant ; /dev/mapper/cryptswap1 none swap
Soit tu supprimes les trois lignes.
Avec ces manips, tu modifies le fichier /etc/fstab sans le renommer. Modif faite tu enregistres et tu fermes.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#39 Le 28/06/2015, à 02:39
- nany
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
♯ ← ceci est un dièse.
# ← ceci est un croisillon.
Oui, je sais, je chipote mais, l’occasion faisant le larron, j’en profite pour mettre les pendules à l’heure.
Revenons-en maintenant à nos moutons. Donc tu as en effet le choix entre mettre la dernière ligne en commentaire et supprimer les trois dernières lignes.
Ce qui ne t’a pas encore été dit, c’est que, comme il s’agit d’un fichier système, il faut l’éditer avec les droits d’administration. Pour te guider, suis cette page de doc : tutoriel/comment_modifier_un_fichier.
Et si tu veux aller plus loin dans la compréhension de ce fichier qu’on te demande de modifier (car il contient encore des infos sur le swap) : mount_fstab.
Cette fois, je pense que tout y est.
Ite, missa est.
Hors ligne
#40 Le 28/06/2015, à 09:05
- Babdu89
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Bonjour.
nany a dit;
♯ ← ceci est un dièse.
# ← ceci est un croisillon.
Oui, je sais, je chipote mais, l’occasion faisant le larron, j’en profite pour mettre les pendules à l’heure.
J'ai pris note, d'autant plus que je n'ai pas de touche dièse.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#41 Le 28/06/2015, à 09:51
- malbo
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Le dernier Boot-Info de sebas1 ( http://paste.ubuntu.com/11783665/ dont il a donné le lien dans le post #33) :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99-2.00) is installed in the MBR of /dev/sda and looks at sector
49315840 of the same hard drive for core.img, but core.img can not be
found at this location.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 128.0 GB, 128035676160 bytes
255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 250,069,679 250,069,679 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 233,537,535 232,486,912 Data partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 4E59-7516 vfat
/dev/sda2 7418a7fb-bf82-40a7-b53d-1c6bd40f9970 ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jun 27 16:24 ata-Samsung_SSD_840_PRO_Series_S1ANNSAF202250A -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 27 16:20 ata-Samsung_SSD_840_PRO_Series_S1ANNSAF202250A-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 27 16:20 ata-Samsung_SSD_840_PRO_Series_S1ANNSAF202250A-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Jun 27 16:24 wwn-0x50025385a01c54cf -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 27 16:20 wwn-0x50025385a01c54cf-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 27 16:20 wwn-0x50025385a01c54cf-part2 -> ../../sda2
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw)
/dev/sda2 / ext4 (rw,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
else
search --no-floppy --fs-uuid --set=root 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7418a7fb-bf82-40a7-b53d-1c6bd40f9970' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
else
search --no-floppy --fs-uuid --set=root 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
fi
linux /boot/vmlinuz-3.16.0-41-generic.efi.signed root=UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.16.0-41-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-7418a7fb-bf82-40a7-b53d-1c6bd40f9970' {
menuentry 'Ubuntu, avec Linux 3.16.0-41-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-41-generic-advanced-7418a7fb-bf82-40a7-b53d-1c6bd40f9970' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
else
search --no-floppy --fs-uuid --set=root 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
fi
echo 'Chargement de Linux 3.16.0-41-generic…'
linux /boot/vmlinuz-3.16.0-41-generic.efi.signed root=UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-41-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-41-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-41-generic-recovery-7418a7fb-bf82-40a7-b53d-1c6bd40f9970' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
else
search --no-floppy --fs-uuid --set=root 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
fi
echo 'Chargement de Linux 3.16.0-41-generic…'
linux /boot/vmlinuz-3.16.0-41-generic.efi.signed root=UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-41-generic
}
menuentry 'Ubuntu, avec Linux 3.16.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-advanced-7418a7fb-bf82-40a7-b53d-1c6bd40f9970' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
else
search --no-floppy --fs-uuid --set=root 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
fi
echo 'Chargement de Linux 3.16.0-30-generic…'
linux /boot/vmlinuz-3.16.0-30-generic root=UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-30-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-recovery-7418a7fb-bf82-40a7-b53d-1c6bd40f9970' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
else
search --no-floppy --fs-uuid --set=root 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
fi
echo 'Chargement de Linux 3.16.0-30-generic…'
linux /boot/vmlinuz-3.16.0-30-generic root=UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-30-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=4E59-7516 /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
#UUID=984c8085-b59d-4f63-88b2-9a5428ec8a8a none swap sw 0 0
/dev/mapper/cryptswap1 none swap sw 0 0
--------------------------------------------------------------------------------
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-06-27__16h24 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in installed-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.16.0-41-generic.efi.signed root=UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 ro quiet splash vt.handoff=7
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 14.04.2 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="4E59-7516" TYPE="vfat"
/dev/sda2: UUID="7418a7fb-bf82-40a7-b53d-1c6bd40f9970" TYPE="ext4"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juin 27 11:05 grub.d
total 76
-rwxr-xr-x 1 root root 9424 mai 15 2014 00_header
-rwxr-xr-x 1 root root 6058 mai 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 2014 40_custom
-rwxr-xr-x 1 root root 216 mai 15 2014 41_custom
-rw-r--r-- 1 root root 483 mai 15 2014 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=4E59-7516 (sda1)
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 1 seconds
BootOrder: 0000,0001
Boot0000* ubuntu HD(1,800,100000,0edab95a-53fd-416d-a32d-608f17845d7b)File(EFIubuntushimx64.efi)
Boot0001* ubuntu HD(1,800,100000,0edab95a-53fd-416d-a32d-608f17845d7b)File(EFIUbuntugrubx64.efi)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /boot/efi.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA Samsung SSD 840 (scsi)
Disk /dev/sda: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 120GB 119GB ext4
=================== parted -lm:
BYT;
/dev/sda:128GB:scsi:512:512:gpt:ATA Samsung SSD 840;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:120GB:119GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 119,2G Samsung SSD
sda1 part vfat 512M 4E59-7516
sda2 part ext4 110,9G 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
KNAME ROTA RO RM STATE MOUNTPOINT
sda 0 0 0 running
sda1 0 0 0 /boot/efi
sda2 0 0 0 /
=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda1 on /boot/efi type vfat (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
/home/camp/.Private on /home/camp type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=7f428e6b06ae5a36,ecryptfs_fnek_sig=80981af02fde6f58)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=camp)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx ptp0 pts random rfkill rtc rtc0 sda sda1 sda2 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom usb vfio vga_arbiter vhci vhost-net watchdog watchdog0 zero
ls /dev/mapper: control
ls: impossible d'accéder à : Aucun fichier ou dossier de ce type
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 16 75 59 4e 4e 4f 20 4e 41 4d 45 20 20 |..).uYNNO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda2 ext4 109G 9.9G 94G 10% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 787M 1.3M 786M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 3.9G 156K 3.9G 1% /run/shm
none tmpfs 100M 32K 100M 1% /run/user
/dev/sda1 vfat 511M 3.4M 508M 1% /boot/efi
/home/camp/.Private ecryptfs 109G 9.9G 94G 10% /home/camp
=================== fdisk -l:
Disk /dev/sda: 128.0 GB, 128035676160 bytes
255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 250069679 125034839+ ee GPT
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file rename-ms-efi
=================== Final advice in case of suggested repair
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.2 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
On y voit cet extrait :
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda2 ext4 109G 9.9G 94G 10% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 787M 1.3M 786M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 3.9G 156K 3.9G 1% /run/shm
none tmpfs 100M 32K 100M 1% /run/user
/dev/sda1 vfat 511M 3.4M 508M 1% /boot/efi
/home/camp/.Private ecryptfs 109G 9.9G 94G 10% /home/camp
La ligne suivante indique que /home est chiffré :
/home/camp/.Private ecryptfs 109G 9.9G 94G 10% /home/camp
Et quand /home est chiffré, j'ai constaté qu'il y a toujours chiffrement automatique de la swap.
@sebas1 : lors de ta dernière installation, as-tu coché la case "Chiffrer mon dossier personnel" ? : http://www.hostingpics.net/viewer.php?i … 151615.png
Dernière modification par malbo (Le 28/06/2015, à 10:50)
Hors ligne
#42 Le 28/06/2015, à 10:54
- sebas1
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Voila merci à nany pour ces explications pédagogiques.
Donc il fallait faire un
gksudo gedit /etc/fstab
Supprimer les trois lignes et sauvegarder.
Le nouveau boot-info (j'ai même pas redémarré)
Ubuntu Pastebin
Paste from boot-repair at Sun, 28 Jun 2015 08:39:16 +0000
Download as text
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99-2.00) is installed in the MBR of /dev/sda and looks at sector
49315840 of the same hard drive for core.img, but core.img can not be
found at this location.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 128.0 GB, 128035676160 bytes
255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 250,069,679 250,069,679 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 233,537,535 232,486,912 Data partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 4E59-7516 vfat
/dev/sda2 7418a7fb-bf82-40a7-b53d-1c6bd40f9970 ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jun 28 10:39 ata-Samsung_SSD_840_PRO_Series_S1ANNSAF202250A -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 28 10:37 ata-Samsung_SSD_840_PRO_Series_S1ANNSAF202250A-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 28 09:56 ata-Samsung_SSD_840_PRO_Series_S1ANNSAF202250A-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Jun 28 10:39 wwn-0x50025385a01c54cf -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 28 10:37 wwn-0x50025385a01c54cf-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 28 09:56 wwn-0x50025385a01c54cf-part2 -> ../../sda2
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw)
/dev/sda2 / ext4 (rw,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
else
search --no-floppy --fs-uuid --set=root 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7418a7fb-bf82-40a7-b53d-1c6bd40f9970' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
else
search --no-floppy --fs-uuid --set=root 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
fi
linux /boot/vmlinuz-3.16.0-41-generic.efi.signed root=UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.16.0-41-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-7418a7fb-bf82-40a7-b53d-1c6bd40f9970' {
menuentry 'Ubuntu, avec Linux 3.16.0-41-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-41-generic-advanced-7418a7fb-bf82-40a7-b53d-1c6bd40f9970' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
else
search --no-floppy --fs-uuid --set=root 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
fi
echo 'Chargement de Linux 3.16.0-41-generic…'
linux /boot/vmlinuz-3.16.0-41-generic.efi.signed root=UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-41-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-41-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-41-generic-recovery-7418a7fb-bf82-40a7-b53d-1c6bd40f9970' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
else
search --no-floppy --fs-uuid --set=root 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
fi
echo 'Chargement de Linux 3.16.0-41-generic…'
linux /boot/vmlinuz-3.16.0-41-generic.efi.signed root=UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-41-generic
}
menuentry 'Ubuntu, avec Linux 3.16.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-advanced-7418a7fb-bf82-40a7-b53d-1c6bd40f9970' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
else
search --no-floppy --fs-uuid --set=root 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
fi
echo 'Chargement de Linux 3.16.0-30-generic…'
linux /boot/vmlinuz-3.16.0-30-generic root=UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-30-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-recovery-7418a7fb-bf82-40a7-b53d-1c6bd40f9970' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
else
search --no-floppy --fs-uuid --set=root 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
fi
echo 'Chargement de Linux 3.16.0-30-generic…'
linux /boot/vmlinuz-3.16.0-30-generic root=UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-30-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=4E59-7516 /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-06-28__10h39 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in installed-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.16.0-41-generic.efi.signed root=UUID=7418a7fb-bf82-40a7-b53d-1c6bd40f9970 ro quiet splash vt.handoff=7
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 14.04.2 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="4E59-7516" TYPE="vfat"
/dev/sda2: UUID="7418a7fb-bf82-40a7-b53d-1c6bd40f9970" TYPE="ext4"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juin 27 11:05 grub.d
total 76
-rwxr-xr-x 1 root root 9424 mai 15 2014 00_header
-rwxr-xr-x 1 root root 6058 mai 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 2014 40_custom
-rwxr-xr-x 1 root root 216 mai 15 2014 41_custom
-rw-r--r-- 1 root root 483 mai 15 2014 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=4E59-7516 (sda1)
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 1 seconds
BootOrder: 0000,0001
Boot0000* ubuntu HD(1,800,100000,0edab95a-53fd-416d-a32d-608f17845d7b)File(EFIubuntushimx64.efi)
Boot0001* ubuntu HD(1,800,100000,0edab95a-53fd-416d-a32d-608f17845d7b)File(EFIUbuntugrubx64.efi)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /boot/efi.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA Samsung SSD 840 (scsi)
Disk /dev/sda: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 120GB 119GB ext4
=================== parted -lm:
BYT;
/dev/sda:128GB:scsi:512:512:gpt:ATA Samsung SSD 840;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:120GB:119GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 119,2G Samsung SSD
sda1 part vfat 512M 4E59-7516
sda2 part ext4 110,9G 7418a7fb-bf82-40a7-b53d-1c6bd40f9970
KNAME ROTA RO RM STATE MOUNTPOINT
sda 0 0 0 running
sda1 0 0 0 /boot/efi
sda2 0 0 0 /
=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda1 on /boot/efi type vfat (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
/home/camp/.Private on /home/camp type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=7f428e6b06ae5a36,ecryptfs_fnek_sig=80981af02fde6f58)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=camp)
gvfsd-fuse on /root/.gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx ptp0 pts random rfkill rtc rtc0 sda sda1 sda2 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom usb vfio vga_arbiter vhci vhost-net watchdog watchdog0 zero
ls /dev/mapper: control
ls: impossible d'accéder à : Aucun fichier ou dossier de ce type
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 fe 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 16 75 59 4e 4e 4f 20 4e 41 4d 45 20 20 |..).uYNNO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda2 ext4 109G 11G 94G 10% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 787M 1.3M 786M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 3.9G 160K 3.9G 1% /run/shm
none tmpfs 100M 40K 100M 1% /run/user
/dev/sda1 vfat 511M 3.4M 508M 1% /boot/efi
/home/camp/.Private ecryptfs 109G 11G 94G 10% /home/camp
=================== fdisk -l:
Disk /dev/sda: 128.0 GB, 128035676160 bytes
255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 250069679 125034839+ ee GPT
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file rename-ms-efi
=================== Final advice in case of suggested repair
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.2 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
Download as text
Les trois dernières lignes du fstab ont disparues.
Pour ces histoires de chiffrage j'ai eu deux options lors de l'installation. La première avec lvm mais j'ai pas voulu pour pas compliquer davantage l'installation. Et la deuxième un peu plus loin qui semblait plus légère et pour pouvoir utiliser un mot de passe.
Merci à tous ou toutes
Dernière modification par sebas1 (Le 28/06/2015, à 10:56)
Hors ligne
#43 Le 28/06/2015, à 10:58
- maxire
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Faute!
Je n'avais effectivement pas lu le dernier boot-info, pas eu envie, il fait trop beau.
Je suis surpris que la partition swap aie pue être supprimée sans que lvm proteste!
La case chiffrage de l'installateur est-elle précochée?
Je ne me souviens plus.
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#44 Le 28/06/2015, à 11:01
- sebas1
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
lors de ta dernière installation, as-tu coché la case "Chiffrer mon dossier personnel" ? : http://www.hostingpics.net/viewer.php?i … 151615.png
Je ne me souviens plus exactement si c'était cette page mais comme je disais dans le dernier message j'ai dit oui à la deuxième possibilité de chiffrement qui s'est présentée.
Hors ligne
#45 Le 28/06/2015, à 11:02
- maxire
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Euh, ce que ne dit pas clairement le programme d'installation c'est que l'utilisation du chiffrage implique celle de lvm donc pour la simplicité c'est raté par contre la double complexité lvm + chiffrage c'est une réussite.
Maxire
Archlinux/Mate + Ubuntu 22.04 + Archlinux/Gnome sur poste de travail
Hors ligne
#46 Le 28/06/2015, à 11:18
- sebas1
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Est-ce que le chiffrage utilise beaucoup les cellules du SSD ?
Si / est chiffré est-ce que ça pose d'autres problèmes, par exemple pour communiquer avec le HDD data ?
Si non c'est bien ainsi et j'ai mis en [résolu]
Hors ligne
#47 Le 28/06/2015, à 11:22
- malbo
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
Depuis une session de ton Ubuntu installé, je te prie de passer la commande suivante :
free
et coller le résultat dans ta réponse.
Hors ligne
#48 Le 28/06/2015, à 11:32
- sebas1
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
total used free shared buffers cached
Mem: 8054636 2335080 5719556 435824 107064 1250536
-/+ buffers/cache: 977480 7077156
Swap: 0 0 0
Hors ligne
#49 Le 28/06/2015, à 11:40
- malbo
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
On y voit que tu as 8 Go de RAM dont environ 2 Go actuellement utilisés. On voit aussi que tu n'as pas de swap mais c'est normal puisque tu l'as supprimé. Pour le bon fonctionnement de ton Ubuntu, tu n'as pas besoin de swap puisque tu as beaucoup de RAM. C'est parfait pour moi. Par ailleurs, je ne sais pas répondre à tes questions du post #46.
Hors ligne
#50 Le 28/06/2015, à 11:43
- sebas1
Re : [RÉSOLU] Partition et boot entre SSD et HD à la sauce n'importe quoi.
C'est bon pour moi aussi. Je verrais bien à l'utilisation si ça pose des problèmes.
Merci
Hors ligne