#1 Le 22/07/2015, à 19:04
- nouya
Unable to acces Systeme
Bonjour ,
Je suis débutant, sous ce systeme et je cherche a récuperer mes données de mon disque dur ...
Voici mon message d'erreur :
Error mounting /dev/sda1 at /media/ubuntu/SYSTEME: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=999,gid=999,dmask=0077,fmask=0177" "/dev/sda1" "/media/ubuntu/SYSTEME"' exited with non-zero exit status 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read of MFT, mft=1762 count=1 br=-1: Input/output error
Failed to mount '/dev/sda1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
J'ai essayé de démarrer windows mais impossible meme pour lancer la commande chkdsk /f
Pouuriez vous m'aider s'il vous plaît, je désespere de pouvoir recuperer toutes mes données se trouvant dessus .
Merci
Hors ligne
#2 Le 22/07/2015, à 21:16
- Bougron
Re : Unable to acces Systeme
Bonjour
Dans tu dis que tu as essayé windows pour lancer la commande de fsck
Veux-tu dire que tu ne sais pas faire la commande fsck
ou que windows ne peut plus se lancer?
Dans ce dernier cas, relances ubuntu
installes depuis la logithèque, le logiciel GSmartctControl. Le mot clé est smartclt
et vérifies l'état du disque entier, C'est une commande du style.
smartctl --all /dev/hda
Dernière modification par Bougron (Le 22/07/2015, à 21:17)
Hors ligne
#3 Le 22/07/2015, à 21:58
- nouya
Re : Unable to acces Systeme
bonsoir bougron,
impossible de démarrer par Windows donc je ne peux lancer la commande chkdsk ....
Où trouve tu la logithèque , je précise que je passe par le cd pour démarrer avec ubuntu et c'est la première fois que je l'utilise donc je ne connais pas du tout les commandes
Hors ligne
#4 Le 22/07/2015, à 22:08
- Bougron
Re : Unable to acces Systeme
si ton ubuntu est bien installé sur disque
Lorsqu'il est lancé, dans la partie supérieure gauche, tu as des icônes.
lorsque tu positionnes le curseur dessus, il y a une petite bulle qui s'ouvre et te dis ce que c'est.
Tentes le 4eme en descendant qu ressemble à un porte document avec un grand A dans son milieu 'logithèque ubuntu'
Dernière modification par Bougron (Le 22/07/2015, à 22:10)
Hors ligne
#5 Le 22/07/2015, à 22:12
- nouya
Re : Unable to acces Systeme
Non ubuntu n'est pas installé sur le disque , je ne risque pas de tout perdre si je l'installe sachant que j'utilise le pc qui ne veut pas démarrer sous windows
Hors ligne
#6 Le 22/07/2015, à 22:31
- Bougron
Re : Unable to acces Systeme
Non N'installes pas
C'est aussi faisable avec la live USB
Je vais dire de mémoire.
Tu frappes la commande smartctl
En réponse tu devrais une ligne qui te dit que ce n'est pas installé suivie d'une ligne qui te donne la codification qu'il faut pour installer.
Un petit copier/coller et c'est parti
S'il manque d'autres librairies, on verra bien
Dernière modification par Bougron (Le 22/07/2015, à 22:56)
Hors ligne
#7 Le 22/07/2015, à 23:00
- Bougron
Re : Unable to acces Systeme
bonsoir bougron,
je précise que je passe par le cd pour démarrer avec ubuntu
J'ai zappé cela,
A chaque fois que tu arrêteras la session-live, tu perdras toute l'installation de smartctl
contrairement à une USB-live
Hors ligne
#8 Le 23/07/2015, à 07:34
- nouya
Re : Unable to acces Systeme
Bonjour bougron ,
je viens d'installer smartctl :
tubuntu@ubuntu:~$ smartctl
The program 'smartctl' is currently not installed. You can install it by typing:
sudo apt-get install smartmontools
ubuntu@ubuntu:~$ sudo apt-get install smartmontools
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
bsd-mailx postfix
Paquets suggérés :
procmail postfix-mysql postfix-pgsql postfix-ldap postfix-pcre sasl2-bin
dovecot-common postfix-cdb postfix-doc gsmartcontrol smart-notifier
Paquets recommandés :
mailx mailutils
Les NOUVEAUX paquets suivants seront installés :
bsd-mailx postfix smartmontools
0 mis à jour, 3 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 1 597 ko dans les archives.
Après cette opération, 5 442 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n]
Dois je repondre oui ou non ?
Et oui bougron je passe par le cd !!!!
Peut on continuer comme ca ?
Hors ligne
#9 Le 23/07/2015, à 09:59
- Bougron
Re : Unable to acces Systeme
Bonjour
La réponse à 'souhaitez Vous continue' est O
Pour le moment restes avec le CDROM
La différence avec une clé USB, c'est que ce que tu installes actuellement n'est pas enregistré sur le CD-ROM et c'est à recommencer à chaque boot.
Actuellement, l'espace supplémentaire utilisé est celui de la RAM. Tant qu'il y a de la place dans la RAM, ça marche.
Dernière modification par Bougron (Le 23/07/2015, à 09:59)
Hors ligne
#10 Le 23/07/2015, à 10:14
- Nasman
Re : Unable to acces Systeme
Clé usb persistante, il faut préciser.
PC fixe sous Bionic 64 bits et portable avec Focal 64 bits
Hors ligne
#11 Le 23/07/2015, à 10:34
- Bougron
Re : Unable to acces Systeme
Bonjour Nasman
Oui effectivement, il faut préciser persistante
et ajouter que si la clé est faite pour un ordinateur EFI, il faut bricoler la clé fabriquée pour obtenir la persistance.
Et il y a alors mieux.
Il n'y a plus besoin de bricoler pour agrandir la taille de CASPER, Tout le reste de la clé devient alors accessible de façon totalement standard.
Donc maintenant, lorsque je boote avec la clé USB, je peux choisir le mode persistance ou pas. Dans certains cas on peut ne pas vouloir conserver( 15.04)
Dernière modification par Bougron (Le 23/07/2015, à 10:41)
Hors ligne
#12 Le 23/07/2015, à 12:39
- nouya
Re : Unable to acces Systeme
Pour l'instant je n'ai pas de cle usb que je peux créer , en repondant oui ,
Outil de configuration des paquets
┌─────────────────────────┤ Postfix Configuration ├─────────────────────────┐
│ │
│ Veuillez choisir la configuration type de votre serveur de messagerie la
│ plus adaptée à vos besoins.
│
│ Pas de configuration :
│ Devrait être choisi pour laisser la configuration actuelle inchangée.
│ Site Internet :
│ L'envoi et la réception s'effectuent directement en SMTP.
│ Site Internet avec un smarthost :
│ Les messages sont reçus directement en SMTP ou grâce à un utilitaire
│ comme fechtmail. Les messages sortants sont envoyés en utilisant un
│ smarthost.
│ Système satellite :
│ Tous les messages sont envoyés vers une autre machine, nommée un
│ smarthost.
│
│ <Ok>
│ │
└───────────────────────────────────────────────────────────────────────────┘
et maintenant je suis bloqué
Hors ligne
#13 Le 23/07/2015, à 13:58
- Bougron
Re : Unable to acces Systeme
Je n'ai encore jamais utilisé smartctl en live USB.
Je te propose de répondre OK
Car je ne vois pas trop quoi faire d'autre,
Il n'y a aucune option de mise en route de smartctl qui court-circuite le réseau.
En fait je pense que c'est destiné à faire le suivi des disques.
Lorsque smartctl tourne en tache de fond, régulièremet, il inspecte les disques. S'il y a un problème, on reçoit un email.
Dans notre contexte, on va en faire un usage ponctuel, et si le réseau est mal paramétré, cela na pas d'importance.
Dernière modification par Bougron (Le 23/07/2015, à 14:02)
Hors ligne
#14 Le 23/07/2015, à 15:40
- nouya
Re : Unable to acces Systeme
donc voici la suite qui c'est passé apres avoir repondu oui et ok
Souhaitez-vous continuer ? [O/n] o
1 597 ko réceptionnés en 11s (136 ko/s)
Préconfiguration des paquets...
Sélection du paquet postfix précédemment désélectionné.
(Lecture de la base de données... 169699 fichiers et répertoires déjà installés.)
Preparing to unpack .../postfix_2.11.0-1_amd64.deb ...
Unpacking postfix (2.11.0-1) ...
Sélection du paquet bsd-mailx précédemment désélectionné.
Preparing to unpack .../bsd-mailx_8.1.2-0.20131005cvs-1_amd64.deb ...
Unpacking bsd-mailx (8.1.2-0.20131005cvs-1) ...
Sélection du paquet smartmontools précédemment désélectionné.
Preparing to unpack .../smartmontools_6.2+svn3841-1.2_amd64.deb ...
Unpacking smartmontools (6.2+svn3841-1.2) ...
Processing triggers for ufw (0.34~rc-0ubuntu2) ...
Processing triggers for ureadahead (0.100.0-16) ...
Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
Paramétrage de postfix (2.11.0-1) ...
Adding group `postfix' (GID 125) ...
Done.
Adding system user `postfix' (UID 116) ...
Adding new user `postfix' (UID 116) with group `postfix' ...
Not creating home directory `/var/spool/postfix'.
Creating /etc/postfix/dynamicmaps.cf
Adding tcp map entry to /etc/postfix/dynamicmaps.cf
Adding sqlite map entry to /etc/postfix/dynamicmaps.cf
Adding group `postdrop' (GID 126) ...
Done.
/etc/aliases does not exist, creating it.
Postfix was not set up. Start with
cp /usr/share/postfix/main.cf.debian /etc/postfix/main.cf
. If you need to make changes, edit
/etc/postfix/main.cf (and others) as needed. To view Postfix configuration
values, see postconf(1).
After modifying main.cf, be sure to run '/etc/init.d/postfix reload'.
Paramétrage de smartmontools (6.2+svn3841-1.2) ...
Processing triggers for ufw (0.34~rc-0ubuntu2) ...
Processing triggers for ureadahead (0.100.0-16) ...
Paramétrage de bsd-mailx (8.1.2-0.20131005cvs-1) ...
update-alternatives: utilisation de « /usr/bin/bsd-mailx » pour fournir « /usr/bin/mailx » (mailx) en mode automatique
Processing triggers for libc-bin (2.19-0ubuntu6.5) ...
Dernière modification par nouya (Le 23/07/2015, à 15:44)
Hors ligne
#15 Le 23/07/2015, à 15:55
- Bougron
Re : Unable to acces Systeme
Merci de ton envoi,
Il devrait y avoir une suite....
Hors ligne
#16 Le 23/07/2015, à 15:59
- nouya
Re : Unable to acces Systeme
je n'ai que ca , rien d'autre apres , il attend que je tape une commande
Hors ligne
#17 Le 23/07/2015, à 16:00
- Bougron
Re : Unable to acces Systeme
Merci de ton envoi,
Il devrait y avoir une suite....
Je vais devoir m'absenter.
Si la solution smartctl ne va pas a son terme .
Je te propose de faire un boot-info avec partir de ton CD-ROM après avoir rebooté pour remettre à zéro la mémoire.
J'ai souvent vu les rapports de boot-info. S'il ne peut pas accéder au disque, il dit pas mal d'anomalies . C'est à tenter.
Mais le fait que windows ne met pas en route m'incite à penser que le disque est 'mort'. Ce qu'il faut prouver.
Dernière modification par Bougron (Le 23/07/2015, à 16:02)
Hors ligne
#18 Le 23/07/2015, à 16:28
- Bougron
Re : Unable to acces Systeme
je n'ai que ca , rien d'autre apres , il attend que je tape une commande
Alors c'est certainement la commande
sudo smartctl -a /dev/sda
Hors ligne
#19 Le 23/07/2015, à 18:12
- nouya
Re : Unable to acces Systeme
voici le boot-info :(j'ai oublié de rebooté avant de la faire) et en suivant tu trouvera le rapport smartctl que j'ai eu avec la commande que tu m'a rajouté
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Windows 7/8/2012 is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Mounting failed: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 16,065 146,528,864 146,512,800 7 NTFS / exFAT / HPFS
/dev/sda2 146,528,865 488,392,064 341,863,200 7 NTFS / exFAT / HPFS
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 EABC0DADBC0D757B ntfs SYSTEME
/dev/sda2 10FA0F09FA0EEB34 ntfs DONNEES
/dev/sr0 iso9660 Ubuntu 14.04.2 LTS amd64
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jul 23 15:52 ata-Hitachi_HTS545025B9A300_101016PBN200CSD2JYET -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 23 15:54 ata-Hitachi_HTS545025B9A300_101016PBN200CSD2JYET-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 23 15:59 ata-Hitachi_HTS545025B9A300_101016PBN200CSD2JYET-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Jul 23 12:22 ata-TEAC_DV-W28S-VT -> ../../sr0
lrwxrwxrwx 1 root root 9 Jul 23 15:52 wwn-0x5000cca62bcf3fdf -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 23 15:54 wwn-0x5000cca62bcf3fdf-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 23 15:59 wwn-0x5000cca62bcf3fdf-part2 -> ../../sda2
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/9191/mounts) leaked on lvs invocation. Parent PID 17878: bash
File descriptor 63 (pipe:[86134]) leaked on lvs invocation. Parent PID 17878: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-07-23__15h47 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
ls: cannot access /home/usr/.config: No such file or directory
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read of MFT, mft=1762 count=1 br=-1: Input/output error
Failed to mount '/dev/sda1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount /dev/sda1 : Error code 13
mount -r /dev/sda1 /mnt/boot-sav/sda1
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount -r /dev/sda1 : Error code 13
=================== os-prober:
/dev/sda1:Windows 7 (loader):Windows:chain
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="SYSTEME" UUID="EABC0DADBC0D757B" TYPE="ntfs"
/dev/sda2: LABEL="DONNEES" UUID="10FA0F09FA0EEB34" TYPE="ntfs"
/dev/sr0: LABEL="Ubuntu 14.04.2 LTS amd64" TYPE="iso9660"
1 disks with OS, 1 OS : 0 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read of MFT, mft=1762 count=1 br=-1: Input/output error
Failed to mount '/dev/sda1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount /dev/sda1 : Error code 13
mount -r /dev/sda1 /mnt/boot-sav/sda1
ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount -r /dev/sda1 : Error code 13
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA Hitachi HTS54502 (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 8225kB 75.0GB 75.0GB primary ntfs boot
2 75.0GB 250GB 175GB primary ntfs
Model: TEAC DV-W28S-VT (scsi)
Disk /dev/sr0: 4700MB
Sector size (logical/physical): 2048B/2048B
Partition Table: mac
Number Start End Size File system Name Flags
1 8192B 24.6kB 16.4kB Apple
2 42.3MB 51.8MB 9568kB EFI
=================== parted -lm:
BYT;
/dev/sda:250GB:scsi:512:512:msdos:ATA Hitachi HTS54502;
1:8225kB:75.0GB:75.0GB:ntfs::boot;
2:75.0GB:250GB:175GB:ntfs::;
BYT;
/dev/sr0:4700MB:scsi:2048:2048:mac:TEAC DV-W28S-VT;
1:8192B:24.6kB:16.4kB::Apple:;
2:42.3MB:51.8MB:9568kB::EFI:;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 232,9G Hitachi
sda1 part ntfs 69,9G SYSTEME EABC0DADBC0D757B
sda2 part ntfs 163G DONNEES 10FA0F09FA0EEB34
sr0 rom iso9660 4,4G Ubuntu 14.04.2 LTS amd64
DV-W28S-
loop0 loop squashfs 953M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0
sda2 1 0 0 /mnt/boot-sav/sda2
sr0 1 0 1 running /cdrom
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout tpm0 uhid uinput urandom vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 c1 3e 00 00 |........?....>..|
00000020 00 00 00 00 80 00 80 00 9f 9b bb 08 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 7b 75 0d bc ad 0d bc ea |........{u......|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 61 da bb 08 |........?...a...|
00000020 00 00 00 00 80 00 80 00 1f 6b 60 14 00 00 00 00 |.........k`.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 34 eb 0e fa 09 0f fa 10 |........4.......|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 |t.............Er|
00000190 72 65 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 |reur lecture dis|
000001a0 71 75 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 61 62 |que...BOOTMGR ab|
000001b0 73 65 6e 74 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 |sent...BOOTMGR c|
000001c0 6f 6d 70 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b |ompress....Ctrl+|
000001d0 41 6c 74 2b 53 75 70 70 72 20 70 6f 75 72 20 72 |Alt+Suppr pour r|
000001e0 65 64 82 6d 61 72 72 65 72 0d 0a 00 6f 20 72 65 |ed.marrer...o re|
000001f0 73 74 61 72 74 0d 0a 00 8c a4 b5 c9 00 00 55 aa |start.........U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 898M 135M 764M 15% /
udev devtmpfs 887M 12K 887M 1% /dev
tmpfs tmpfs 180M 1.2M 179M 1% /run
/dev/sr0 iso9660 996M 996M 0 100% /cdrom
/dev/loop0 squashfs 953M 953M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 898M 1.2M 897M 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 898M 208K 898M 1% /run/shm
none tmpfs 100M 64K 100M 1% /run/user
/dev/sda2 fuseblk 164G 163G 285M 100% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0c610c61
Device Boot Start End Blocks Id System
/dev/sda1 * 16065 146528864 73256400 7 HPFS/NTFS/exFAT
/dev/sda2 146528865 488392064 170931600 7 HPFS/NTFS/exFAT
gui-tab-other.sh: line 94: _checkbutton_repairfilesystems: command not found
=================== Suggested repair
The default repair of the Boot-Repair utility would restore the [(generic mbr)] MBR in sda, and make it boot on sda1.
Additional repair would be performed: unhide-bootmenu-10s repair-filesystems
=================== User settings
The settings chosen by the user will not act on the boot.
Et maintenant voici le résultat de la commande que tu m'a dit d'essayé :
ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-30-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K500.B
Device Model: Hitachi HTS545025B9A300
Serial Number: 101016PBN200CSD2JYET
LU WWN Device Id: 5 000cca 62bcf3fdf
Firmware Version: PB2OC64G
User Capacity: 250 059 350 016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Jul 23 16:10:10 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 83) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 082 082 062 Pre-fail Always - 34865152
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 209 209 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 2375
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 133
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 076 076 000 Old_age Always - 10702
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2363
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 507576386
193 Load_Cycle_Count 0x0012 078 078 000 Old_age Always - 224163
194 Temperature_Celsius 0x0002 152 152 000 Old_age Always - 36 (Min/Max 5/47)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 344
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 28
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 2
223 Load_Retry_Count 0x000a 099 099 000 Old_age Always - 1
SMART Error Log Version: 1
ATA Error Count: 301 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 301 occurred at disk power-on lifetime: 10696 hours (445 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 4f ca c6 4b e1 Error: UNC 79 sectors at LBA = 0x014bc6ca = 21743306
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 7f 9a c6 4b e0 00 00:01:16.300 READ DMA EXT
25 00 7f 1b c6 4b e0 00 00:01:16.300 READ DMA EXT
25 00 7f 9c c5 4b e0 00 00:01:16.300 READ DMA EXT
25 00 7f 1d c5 4b e0 00 00:01:16.300 READ DMA EXT
25 00 7f 9e c4 4b e0 00 00:01:16.300 READ DMA EXT
Error 300 occurred at disk power-on lifetime: 10696 hours (445 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 4f ca c6 4b e1 Error: UNC 79 sectors at LBA = 0x014bc6ca = 21743306
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 7f 9a c6 4b e0 00 00:01:12.600 READ DMA EXT
25 00 7f 1b c6 4b e0 00 00:01:12.600 READ DMA EXT
25 00 7f 9c c5 4b e0 00 00:01:12.600 READ DMA EXT
25 00 7f 1d c5 4b e0 00 00:01:12.600 READ DMA EXT
25 00 7f 9e c4 4b e0 00 00:01:12.600 READ DMA EXT
Error 299 occurred at disk power-on lifetime: 10696 hours (445 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 4f ca c6 4b e1 Error: UNC 79 sectors at LBA = 0x014bc6ca = 21743306
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 7f 9a c6 4b e0 00 00:01:08.800 READ DMA EXT
25 00 7f 1b c6 4b e0 00 00:01:08.800 READ DMA EXT
25 00 7f 9c c5 4b e0 00 00:01:08.800 READ DMA EXT
25 00 7f 1d c5 4b e0 00 00:01:08.800 READ DMA EXT
25 00 7f 9e c4 4b e0 00 00:01:08.800 READ DMA EXT
Error 298 occurred at disk power-on lifetime: 10696 hours (445 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 12 79 62 e0 Error: UNC 1 sectors at LBA = 0x00627912 = 6453522
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 02 11 79 62 e0 00 00:01:04.400 READ DMA EXT
25 00 02 11 79 62 e0 00 00:01:00.200 READ DMA EXT
25 00 02 11 79 62 e0 00 00:00:56.000 READ DMA EXT
25 00 02 11 79 62 e0 00 00:00:51.700 READ DMA EXT
25 00 02 11 79 62 e0 00 00:00:47.500 READ DMA EXT
Error 297 occurred at disk power-on lifetime: 10696 hours (445 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 12 79 62 e0 Error: UNC 1 sectors at LBA = 0x00627912 = 6453522
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 02 11 79 62 e0 00 00:01:00.200 READ DMA EXT
25 00 02 11 79 62 e0 00 00:00:56.000 READ DMA EXT
25 00 02 11 79 62 e0 00 00:00:51.700 READ DMA EXT
25 00 02 11 79 62 e0 00 00:00:47.500 READ DMA EXT
25 00 02 11 79 62 e0 00 00:00:43.500 READ DMA EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay
Voila , bonne lecture
Dernière modification par nouya (Le 23/07/2015, à 18:43)
Hors ligne
#20 Le 23/07/2015, à 19:13
- moko138
Re : Unable to acces Systeme
ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-30-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K500.B
Device Model: Hitachi HTS545025B9A300
Serial Number: 101016PBN200CSD2JYET
LU WWN Device Id: 5 000cca 62bcf3fdf
Firmware Version: PB2OC64G
User Capacity: 250 059 350 016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Jul 23 16:10:10 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 83) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 082 082 062 Pre-fail Always - 34865152
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 209 209 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 2375
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 133
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 076 076 000 Old_age Always - 10702
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2363
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 507576386
193 Load_Cycle_Count 0x0012 078 078 000 Old_age Always - 224163
194 Temperature_Celsius 0x0002 152 152 000 Old_age Always - 36 (Min/Max 5/47)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 344
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 28
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 2
223 Load_Retry_Count 0x000a 099 099 000 Old_age Always - 1
SMART Error Log Version: 1
ATA Error Count: 301 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 301 occurred at disk power-on lifetime: 10696 hours (445 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 4f ca c6 4b e1 Error: UNC 79 sectors at LBA = 0x014bc6ca = 21743306
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 7f 9a c6 4b e0 00 00:01:16.300 READ DMA EXT
25 00 7f 1b c6 4b e0 00 00:01:16.300 READ DMA EXT
25 00 7f 9c c5 4b e0 00 00:01:16.300 READ DMA EXT
25 00 7f 1d c5 4b e0 00 00:01:16.300 READ DMA EXT
25 00 7f 9e c4 4b e0 00 00:01:16.300 READ DMA EXT
Error 300 occurred at disk power-on lifetime: 10696 hours (445 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 4f ca c6 4b e1 Error: UNC 79 sectors at LBA = 0x014bc6ca = 21743306
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 7f 9a c6 4b e0 00 00:01:12.600 READ DMA EXT
25 00 7f 1b c6 4b e0 00 00:01:12.600 READ DMA EXT
25 00 7f 9c c5 4b e0 00 00:01:12.600 READ DMA EXT
25 00 7f 1d c5 4b e0 00 00:01:12.600 READ DMA EXT
25 00 7f 9e c4 4b e0 00 00:01:12.600 READ DMA EXT
Error 299 occurred at disk power-on lifetime: 10696 hours (445 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 4f ca c6 4b e1 Error: UNC 79 sectors at LBA = 0x014bc6ca = 21743306
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 7f 9a c6 4b e0 00 00:01:08.800 READ DMA EXT
25 00 7f 1b c6 4b e0 00 00:01:08.800 READ DMA EXT
25 00 7f 9c c5 4b e0 00 00:01:08.800 READ DMA EXT
25 00 7f 1d c5 4b e0 00 00:01:08.800 READ DMA EXT
25 00 7f 9e c4 4b e0 00 00:01:08.800 READ DMA EXT
Error 298 occurred at disk power-on lifetime: 10696 hours (445 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 12 79 62 e0 Error: UNC 1 sectors at LBA = 0x00627912 = 6453522
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 02 11 79 62 e0 00 00:01:04.400 READ DMA EXT
25 00 02 11 79 62 e0 00 00:01:00.200 READ DMA EXT
25 00 02 11 79 62 e0 00 00:00:56.000 READ DMA EXT
25 00 02 11 79 62 e0 00 00:00:51.700 READ DMA EXT
25 00 02 11 79 62 e0 00 00:00:47.500 READ DMA EXT
Error 297 occurred at disk power-on lifetime: 10696 hours (445 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 12 79 62 e0 Error: UNC 1 sectors at LBA = 0x00627912 = 6453522
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 02 11 79 62 e0 00 00:01:00.200 READ DMA EXT
25 00 02 11 79 62 e0 00 00:00:56.000 READ DMA EXT
25 00 02 11 79 62 e0 00 00:00:51.700 READ DMA EXT
25 00 02 11 79 62 e0 00 00:00:47.500 READ DMA EXT
25 00 02 11 79 62 e0 00 00:00:43.500 READ DMA EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay
La mécanique de ton disque est mourante.
Laisse-le reposer le plus possible.
Tes données sont probablement encore récupérables en grande parie.
On va débattre des suites les moins risquées pour que tu gardes des chances de récupérer tes données.
Par conséquent, si tu n'as qu'un pc pour naviguer, tu peux le faire avec ubuntu live À CONDITION d'avoir débranché ton disque. Sinon, il entrera en rotation dès le démarrage, ce qui aggravera encore son état.
Je serai de retour vers 21h00.
Dernière modification par moko138 (Le 23/07/2015, à 19:15)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#21 Le 23/07/2015, à 19:22
- nouya
Re : Unable to acces Systeme
Bonjour moko138,
ok,
Donc tu me conseil de débrancher le disque dur du pc portable ( retourner le pc et enlever entierement le disque) ou il y a une manip a faire pour eviter qu'il se lance.
Dernière modification par nouya (Le 23/07/2015, à 19:25)
Hors ligne
#22 Le 23/07/2015, à 20:42
- Bougron
Re : Unable to acces Systeme
Bonsoir
Merci pour toutes ces informations. Elles sont très parlantes.
Je ne suis pas un expert de la chose, Je résume rapidement, => installes de nouveau windows sur un disque neuf!
Je ne pense pas être contredit.
Explications viennent
Initialement tu as un un message ubuntu qui te disait de faire "in the first case run chkdsk /f on Windows"
Or tu n'as pu lancer windows.
En standard, lorsque windows se lance il fait ce contrôle automatiquement.
Ce message, on le voit habituellement pour les disques externes. C'est le genre de disque qu'il est facile de connecter à un windows.
Pourtant je ne connais que cette façon de faire pour remettre en état, Cela va donc être compliqué de faire.
Donc le palliatif le plus simple est de formater la partition et de réinstaller windows dans la partition.
C'est une opération que tu peux faire dés maintenant car tu as la sagesse d'avoir découpé ton disque en deux partitions
et ta grosse partition de données est en bon état.
Donc si tu ne fait que cela, Tu es reparti pour un tour ou pour longtemps (je n'ai pas analysé encore tout).
Mais ton disque est en mauvais état, On peu penser que c'est une alerte (sérieuse).
Voici ce qui me fait dire qu'il est en mauvais état https://fr.wikipedia.org/wiki/Self-Moni … echnology)
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 082 082 062 Pre-fail Always - 34865152
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 133
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 344
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 28
1
de plus ton disque commence à avoir de l'age.
Mais le problème n'est pas spécialement là, Il s'est passé quelque chose qui l'a mis en mauvais état.
Peut-être le sais-tu, Mais à part trouver quand, je ne sais pas trouver le quoi. Mais cela fait peur.
Le firmware du disque ne conserve que les 5 dernières erreurs . Dans les quelques rapports de smartctl que j'ai eu à consulter on voit que la dernière à un petit numéro . Or la, on a 300 c'est très important.
et on a aussi la date
Error 297 occurred at disk power-on lifetime: 10696 hours (445 days + 16 hours)
Les cinq dernieres tracées ont la même heure. Je pense donc qu'uil y a eu un sacré problème,
il est fort possible que les 200 qui précèdaient avaient aussi cette heure.
Pour la cause, je ne sais pas l'interpréter.
40 51 4f ca c6 4b e1 Error: UNC 79 sectors at LBA = 0x014bc6ca = 21743306
40 51 01 12 79 62 e0 Error: UNC 1 sectors at LBA = 0x00627912 = 6453522
=>Sans trop réfléchir je dirais que cela concerne des secteurs qui contiennent le logiciel windows qui sont devenus illisibles
et donc windows ne peut pas se mettre en route.
Dernière modification par Bougron (Le 23/07/2015, à 21:26)
Hors ligne
#23 Le 23/07/2015, à 21:13
- nouya
Re : Unable to acces Systeme
pas de souci mais pour recuperer mes données comment je procede
Hors ligne
#24 Le 23/07/2015, à 21:14
- moko138
Re : Unable to acces Systeme
Je ne pense pas être contredit.
Certes non !
débrancher le disque dur du pc portable ( retourner le pc et enlever entierement le disque)
Exactement !
En plus, ça libère l'emplacement pour ton futur disque neuf évoqué par Bougron.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#25 Le 23/07/2015, à 21:26
- nouya
Re : Unable to acces Systeme
donc j'enleve le disque de son emplacement , mais ce qui m'interesse le plus et surtout comment recuperer mes données qui se trouve sur la partition de windows .
Hors ligne