#1 Le 19/08/2015, à 01:16
- djinnie
blocage sur BusyBox à chaque démarrage
Bonsoir tous,
Je viens d'installer Ubuntu 14.04 sur mon "vieux" Asus Zenbook (enfin, seulement 3 ans) en parallèle à Windows 7 car j'ai développé une sale allergie à Windows (malheureusement j'ai encore quelques applications pour lesquelles je n'ai pas trouvées d'équivalent linux).
Je n'ai pas voulu trop modifier le partitionnement d'origine de l'ordinateur, j'ai juste fait de la place sur ma partition Windows pour Ubuntu.
J'ai donc :
Modèle: ATA Hitachi HTS54505 (scsi)
Disque /dev/sda : 500GB
Taille des secteurs (logiques/physiques): 512B/4096B
Table de partitions : gpt
Numéro Début Fin Taille Système de fichiers Nom Fanions
1 1049kB 211MB 210MB fat32 EFI system partition démarrage
2 211MB 345MB 134MB Microsoft reserved partition msftres
3 345MB 148GB 148GB ntfs Basic data partition msftdata
6 148GB 196GB 48,3GB ext4
7 196GB 200GB 4175MB linux-swap(v1)
4 200GB 473GB 273GB ntfs Basic data partition msftdata
5 473GB 500GB 26,8GB ntfs Basic data partition caché, diagnosticJe n'ai aucune idée de l'utilité possible de la deuxième partition...
Je ne sais pas si ceci à un rapport avec cela, mais chaque démarrage bloque et je finis invariablement sur BusyBox :
BusyBox v1.21.1 (Ubuntu 1:1.21.0-1ubuntu1) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) [ 56.320453] ata2: COMRESET failed (errno=-16)
[ 61.356737] ata2: COMRESET failed (errno=-16)
[ 61.356794] ata2: reset failed, giving upAprès ça, je peux faire un exit et lancer Ubuntu pour une session qui me semble tout à fait normale...
Une idée du problème ? Une solution pour passer outre si ce n'est pas grave et gagner ainsi en rapidité au démarrage ?
Merci d'avance
Virginie
Hors ligne
#2 Le 19/08/2015, à 02:31
- Bougron
Re : blocage sur BusyBox à chaque démarrage
Bonsoir.
Comme tu détestes windows, j'espère que tu vas adorer 'BusyBox". Il parait que c'est sa façon de nous souhaiter la bienvenue.
un boot-info serait utile
Hors ligne
#3 Le 19/08/2015, à 04:35
- moko138
Re : blocage sur BusyBox à chaque démarrage
134MB Microsoft reserved partition msftresest une partition nécessaire à windows pour, officiellement, gérer les repartitionnements des disques gpt. Elle fait toujours 134 Mo/128 Mio. Plus de détails là : https://msdn.microsoft.com/en-us/librar … 85%29.aspx
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#4 Le 19/08/2015, à 13:52
- djinnie
Re : blocage sur BusyBox à chaque démarrage
Merci Moko pour cette explication (j'ai drôlement bien fait de ne pas la virer du coup 
!)
Et Bougron voici le lien boot-info
Merci d'avance 
Virginie
Hors ligne
#5 Le 23/08/2015, à 16:48
- djinnie
Re : blocage sur BusyBox à chaque démarrage
Hello tous,
Quelqu'un a-t-il une idée de l'origine de mon problème ?
Merci d'avance
Virginie
Hors ligne
#6 Le 23/08/2015, à 19:29
- moko138
Re : blocage sur BusyBox à chaque démarrage
Donne
cat /var/log/dmesg.0%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#7 Le 24/08/2015, à 01:24
- djinnie
Re : blocage sur BusyBox à chaque démarrage
En entier ? Il est énorme ! Voici déjà la partie sur le ata2 (cherche-t-il un second disque dur ?)
6.523892] ata2: link is slow to respond, please be patient (ready=0)
[ 11.175860] ata2: COMRESET failed (errno=-16)
[ 16.540434] ata2: link is slow to respond, please be patient (ready=0)
[ 21.192406] ata2: COMRESET failed (errno=-16)
[ 26.556982] ata2: link is slow to respond, please be patient (ready=0)
[ 37.041808] random: nonblocking pool is initialized
[ 56.262321] ata2: COMRESET failed (errno=-16)
[ 56.262381] ata2: limiting SATA link speed to 3.0 Gbps
[ 61.298619] ata2: COMRESET failed (errno=-16)
[ 61.298676] ata2: reset failed, giving upSi c'est insuffisant je mettrai le fichier entier
Merci d'avance
Virginie
Hors ligne
#8 Le 24/08/2015, à 03:57
- moko138
Re : blocage sur BusyBox à chaque démarrage
Qu'est-ce que tu appelles "énorme" ?
D'ordinaire, j'observe environ 60 ko jusqu'à l'arrivée sur le bureau.
Là, on lit un abandon ("giving up") à 61.298676 (secondes). Il faut au moins les quelques secondes suivantes et tout ce qui précède.
Donne aussi
sudo dmidecode -s system-product-nameet je te rappelle que Bougron t'a demandé un rapport boot-info...
Dernière modification par moko138 (Le 24/08/2015, à 04:32)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#9 Le 24/08/2015, à 13:22
- djinnie
Re : blocage sur BusyBox à chaque démarrage
Je voulais dire énorme en nombre de lignes, mais le voici in extendo :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-26-generic (buildd@lgw01-04) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #28~14.04.1-Ubuntu SMP Wed Aug 12 14:09:17 UTC 2015 (Ubuntu 3.19.0-26.28~14.04.1-generic 3.19.8-ckt4)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-26-generic.efi.signed root=UUID=f08e16ed-e228-4ca4-8af1-cd7f69742537 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c97bdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c97be000-0x00000000c9dbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c9dbf000-0x00000000c9dc1fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000c9dc2000-0x00000000c9dd6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9dd7000-0x00000000c9ddcfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000c9ddd000-0x00000000c9ddefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9ddf000-0x00000000c9de3fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000c9de4000-0x00000000c9f3cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9f3d000-0x00000000c9f40fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000c9f41000-0x00000000c9f8afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9f8b000-0x00000000c9f91fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000c9f92000-0x00000000c9f93fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9f94000-0x00000000c9fa0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9fa1000-0x00000000c9fb1fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000c9fb2000-0x00000000c9fb4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9fb5000-0x00000000c9fb6fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000c9fb7000-0x00000000c9fcdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9fce000-0x00000000c9fd3fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000c9fd4000-0x00000000c9fdbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9fdc000-0x00000000c9fdcfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000c9fdd000-0x00000000c9febfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9fec000-0x00000000c9fecfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000c9fed000-0x00000000c9ff7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9ff8000-0x00000000c9ffcfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000c9ffd000-0x00000000ca01bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca01c000-0x00000000ca01dfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ca01e000-0x00000000ca031fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca032000-0x00000000ca032fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ca033000-0x00000000ca044fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca045000-0x00000000ca06afff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ca06b000-0x00000000ca07efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca07f000-0x00000000ca07ffff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ca080000-0x00000000ca080fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca081000-0x00000000ca082fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ca083000-0x00000000ca083fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca084000-0x00000000ca088fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ca089000-0x00000000ca0a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca0a1000-0x00000000ca100fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ca101000-0x00000000ca11afff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ca11b000-0x00000000ca644fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ca645000-0x00000000ca8c4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ca8c5000-0x00000000ca8c9fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ca8ca000-0x00000000ca8cafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca8cb000-0x00000000ca90dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ca90e000-0x00000000cad1cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cad1d000-0x00000000caff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caff4000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012f1fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xca894000 ACPI 2.0=0xca894000 SMBIOS=0xf04c0 MPS=0xfd4c0
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX32VD/UX32VD, BIOS UX32VD.206 06/06/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x12f200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0CBC00000 mask FFFC00000 uncachable
[ 0.000000] 7 base 12F800000 mask FFF800000 uncachable
[ 0.000000] 8 base 12F400000 mask FFFC00000 uncachable
[ 0.000000] 9 base 12F200000 mask FFFE00000 uncachable
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 4608MB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 4, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 5, base: 3264MB, range: 64MB, type UC
[ 0.000000] reg 6, base: 3260MB, range: 4MB, type UC
[ 0.000000] reg 7, base: 4856MB, range: 8MB, type UC
[ 0.000000] reg 8, base: 4852MB, range: 4MB, type UC
[ 0.000000] reg 9, base: 4850MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 4014M
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 64K chunk_size: 512M num_reg: 10 lose cover RAM: -256M
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 2G num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 128K chunk_size: 128K num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 128K chunk_size: 256K num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 128K chunk_size: 512K num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 128K chunk_size: 1M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 128K chunk_size: 2M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 128K chunk_size: 4M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 128K chunk_size: 8M num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 128K chunk_size: 16M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 32M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 64M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 128M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 128K chunk_size: 512M num_reg: 10 lose cover RAM: -256M
[ 0.000000] gran_size: 128K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 2G num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 256K chunk_size: 256K num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 256K chunk_size: 512K num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 256K chunk_size: 1M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 256K chunk_size: 2M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 256K chunk_size: 4M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 256K chunk_size: 8M num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 256K chunk_size: 16M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 32M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 64M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 128M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 256K chunk_size: 512M num_reg: 10 lose cover RAM: -256M
[ 0.000000] gran_size: 256K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 2G num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 512K chunk_size: 512K num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 512K chunk_size: 1M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 512K chunk_size: 2M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 512K chunk_size: 4M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 512K chunk_size: 8M num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 512K chunk_size: 16M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 32M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 64M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 128M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 512K chunk_size: 512M num_reg: 10 lose cover RAM: -256M
[ 0.000000] gran_size: 512K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 2G num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 1M chunk_size: 1M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 1M chunk_size: 2M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 1M chunk_size: 4M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 1M chunk_size: 8M num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 1M chunk_size: 16M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 32M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 64M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 128M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 1M chunk_size: 512M num_reg: 10 lose cover RAM: -256M
[ 0.000000] gran_size: 1M chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 2G num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 2M chunk_size: 2M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 2M chunk_size: 4M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 2M chunk_size: 8M num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 2M chunk_size: 16M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 2M chunk_size: 32M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 2M chunk_size: 64M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 2M chunk_size: 128M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 2M chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 2M chunk_size: 512M num_reg: 10 lose cover RAM: -256M
[ 0.000000] gran_size: 2M chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 2M chunk_size: 2G num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 4M chunk_size: 4M num_reg: 10 lose cover RAM: 50M
[ 0.000000] gran_size: 4M chunk_size: 8M num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 4M chunk_size: 16M num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 4M chunk_size: 32M num_reg: 8 lose cover RAM: 2M
[ 0.000000] gran_size: 4M chunk_size: 64M num_reg: 8 lose cover RAM: 2M
[ 0.000000] gran_size: 4M chunk_size: 128M num_reg: 8 lose cover RAM: 2M
[ 0.000000] gran_size: 4M chunk_size: 256M num_reg: 8 lose cover RAM: 2M
[ 0.000000] gran_size: 4M chunk_size: 512M num_reg: 9 lose cover RAM: 2M
[ 0.000000] gran_size: 4M chunk_size: 1G num_reg: 8 lose cover RAM: 2M
[ 0.000000] gran_size: 4M chunk_size: 2G num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 8M chunk_size: 8M num_reg: 10 lose cover RAM: 22M
[ 0.000000] gran_size: 8M chunk_size: 16M num_reg: 10 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 32M num_reg: 8 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 64M num_reg: 8 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 128M num_reg: 8 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 256M num_reg: 8 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 512M num_reg: 9 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 1G num_reg: 8 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 2G num_reg: 10 lose cover RAM: 6M
[ 0.000000] gran_size: 16M chunk_size: 16M num_reg: 10 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 32M num_reg: 8 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 64M num_reg: 8 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 128M num_reg: 8 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 256M num_reg: 8 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 512M num_reg: 9 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 1G num_reg: 8 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 2G num_reg: 10 lose cover RAM: 14M
[ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 8 lose cover RAM: 46M
[ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 8 lose cover RAM: 46M
[ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 8 lose cover RAM: 46M
[ 0.000000] gran_size: 32M chunk_size: 256M num_reg: 8 lose cover RAM: 46M
[ 0.000000] gran_size: 32M chunk_size: 512M num_reg: 9 lose cover RAM: 46M
[ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 8 lose cover RAM: 46M
[ 0.000000] gran_size: 32M chunk_size: 2G num_reg: 9 lose cover RAM: 46M
[ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 6 lose cover RAM: 110M
[ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 6 lose cover RAM: 110M
[ 0.000000] gran_size: 64M chunk_size: 256M num_reg: 7 lose cover RAM: 110M
[ 0.000000] gran_size: 64M chunk_size: 512M num_reg: 8 lose cover RAM: 110M
[ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 7 lose cover RAM: 110M
[ 0.000000] gran_size: 64M chunk_size: 2G num_reg: 7 lose cover RAM: 110M
[ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 5 lose cover RAM: 174M
[ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 7 lose cover RAM: 174M
[ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 8 lose cover RAM: 174M
[ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 7 lose cover RAM: 174M
[ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 6 lose cover RAM: 174M
[ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 3 lose cover RAM: 430M
[ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 3 lose cover RAM: 430M
[ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 3 lose cover RAM: 430M
[ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 3 lose cover RAM: 430M
[ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 3 lose cover RAM: 430M
[ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 3 lose cover RAM: 430M
[ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 3 lose cover RAM: 430M
[ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 2 lose cover RAM: 942M
[ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 2 lose cover RAM: 942M
[ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 1 lose cover RAM: 1966M
[ 0.000000] mtrr_cleanup: can not find optimal value
[ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size
[ 0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped at [ffff8800000fd7b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12f000000-0x12f1fffff]
[ 0.000000] [mem 0x12f000000-0x12f1fffff] page 2M
[ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x12effffff]
[ 0.000000] [mem 0x120000000-0x12effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[ 0.000000] [mem 0x100000000-0x11fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
[ 0.000000] BRK [0x01fd9000, 0x01fd9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xc97bdfff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xc95fffff] page 2M
[ 0.000000] [mem 0xc9600000-0xc97bdfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9dc2000-0xc9dd6fff]
[ 0.000000] [mem 0xc9dc2000-0xc9dd6fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9ddd000-0xc9ddefff]
[ 0.000000] [mem 0xc9ddd000-0xc9ddefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9de4000-0xc9f3cfff]
[ 0.000000] [mem 0xc9de4000-0xc9f3cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9f41000-0xc9f8afff]
[ 0.000000] [mem 0xc9f41000-0xc9f8afff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9f92000-0xc9f93fff]
[ 0.000000] [mem 0xc9f92000-0xc9f93fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9fb2000-0xc9fb4fff]
[ 0.000000] [mem 0xc9fb2000-0xc9fb4fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9fb7000-0xc9fcdfff]
[ 0.000000] [mem 0xc9fb7000-0xc9fcdfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9fd4000-0xc9fdbfff]
[ 0.000000] [mem 0xc9fd4000-0xc9fdbfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9fdd000-0xc9febfff]
[ 0.000000] [mem 0xc9fdd000-0xc9febfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9fed000-0xc9ff7fff]
[ 0.000000] [mem 0xc9fed000-0xc9ff7fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9ffd000-0xca01bfff]
[ 0.000000] [mem 0xc9ffd000-0xca01bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xca01e000-0xca031fff]
[ 0.000000] [mem 0xca01e000-0xca031fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xca033000-0xca044fff]
[ 0.000000] [mem 0xca033000-0xca044fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xca06b000-0xca07efff]
[ 0.000000] [mem 0xca06b000-0xca07efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xca080000-0xca080fff]
[ 0.000000] [mem 0xca080000-0xca080fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xca083000-0xca083fff]
[ 0.000000] [mem 0xca083000-0xca083fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xca089000-0xca0a0fff]
[ 0.000000] [mem 0xca089000-0xca0a0fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xca8ca000-0xca8cafff]
[ 0.000000] [mem 0xca8ca000-0xca8cafff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xca90e000-0xcad1cfff]
[ 0.000000] [mem 0xca90e000-0xca9fffff] page 4k
[ 0.000000] [mem 0xcaa00000-0xcabfffff] page 2M
[ 0.000000] [mem 0xcac00000-0xcad1cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcaff4000-0xcaffffff]
[ 0.000000] [mem 0xcaff4000-0xcaffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x35a2c000-0x36d0dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000CA894000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000CA894088 000094 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CA8A83B8 0000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CA8941B8 0141FA (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000CA8C2F80 000040
[ 0.000000] ACPI: APIC 0x00000000CA8A84B0 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CA8A8528 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000CA8A8570 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 0x00000000CA8A8638 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000CA8A8678 000A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CA8A90B8 000CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CA8A9D60 000098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CA8A9DF8 00091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 0x00000000CA8AA718 000176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.000000] ACPI: HPET 0x00000000CA8AA890 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CA8AA8C8 0009D0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CA8AB298 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 0x00000000CA8ABD30 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012f1fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x12f1f2000-0x12f1f6fff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a800000-ffff88012e7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12f1fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xc97bdfff]
[ 0.000000] node 0: [mem 0xc9dc2000-0xc9dd6fff]
[ 0.000000] node 0: [mem 0xc9ddd000-0xc9ddefff]
[ 0.000000] node 0: [mem 0xc9de4000-0xc9f3cfff]
[ 0.000000] node 0: [mem 0xc9f41000-0xc9f8afff]
[ 0.000000] node 0: [mem 0xc9f92000-0xc9f93fff]
[ 0.000000] node 0: [mem 0xc9fb2000-0xc9fb4fff]
[ 0.000000] node 0: [mem 0xc9fb7000-0xc9fcdfff]
[ 0.000000] node 0: [mem 0xc9fd4000-0xc9fdbfff]
[ 0.000000] node 0: [mem 0xc9fdd000-0xc9febfff]
[ 0.000000] node 0: [mem 0xc9fed000-0xc9ff7fff]
[ 0.000000] node 0: [mem 0xc9ffd000-0xca01bfff]
[ 0.000000] node 0: [mem 0xca01e000-0xca031fff]
[ 0.000000] node 0: [mem 0xca033000-0xca044fff]
[ 0.000000] node 0: [mem 0xca06b000-0xca07efff]
[ 0.000000] node 0: [mem 0xca080000-0xca080fff]
[ 0.000000] node 0: [mem 0xca083000-0xca083fff]
[ 0.000000] node 0: [mem 0xca089000-0xca0a0fff]
[ 0.000000] node 0: [mem 0xca8ca000-0xca8cafff]
[ 0.000000] node 0: [mem 0xca90e000-0xcad1cfff]
[ 0.000000] node 0: [mem 0xcaff4000-0xcaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x12f1fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x12f1fffff]
[ 0.000000] On node 0 totalpages: 1019362
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 27 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12850 pages used for memmap
[ 0.000000] DMA32 zone: 822340 pages, LIFO batch:31
[ 0.000000] Normal zone: 3016 pages used for memmap
[ 0.000000] Normal zone: 193024 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcbe00000-0xcfdfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc97be000-0xc9dbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9dbf000-0xc9dc1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9dd7000-0xc9ddcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9ddf000-0xc9de3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9f3d000-0xc9f40fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9f8b000-0xc9f91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9f94000-0xc9fa0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9fa1000-0xc9fb1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9fb5000-0xc9fb6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9fce000-0xc9fd3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9fdc000-0xc9fdcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9fec000-0xc9fecfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9ff8000-0xc9ffcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca01c000-0xca01dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca032000-0xca032fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca045000-0xca06afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca07f000-0xca07ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca081000-0xca082fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca084000-0xca088fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca0a1000-0xca100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca101000-0xca11afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca11b000-0xca644fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca645000-0xca8c4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca8c5000-0xca8c9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca8cb000-0xca90dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad1d000-0xcaff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88012ee00000 s86144 r8192 d32640 u524288
[ 0.000000] pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003405
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-26-generic.efi.signed root=UUID=f08e16ed-e228-4ca4-8af1-cd7f69742537 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3729560K/4077448K available (7919K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 347888K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.573 MHz processor
[ 0.000044] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.14 BogoMIPS (lpj=9578292)
[ 0.000047] pid_max: default: 32768 minimum: 301
[ 0.000054] ACPI: Core revision 20141107
[ 0.021377] ACPI: All ACPI Tables successfully acquired
[ 0.045242] Security Framework initialized
[ 0.045260] AppArmor: AppArmor initialized
[ 0.045261] Yama: becoming mindful.
[ 0.045624] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.046978] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.047588] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.047597] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.047822] Initializing cgroup subsys memory
[ 0.047828] Initializing cgroup subsys devices
[ 0.047831] Initializing cgroup subsys freezer
[ 0.047833] Initializing cgroup subsys net_cls
[ 0.047835] Initializing cgroup subsys blkio
[ 0.047838] Initializing cgroup subsys perf_event
[ 0.047840] Initializing cgroup subsys net_prio
[ 0.047843] Initializing cgroup subsys hugetlb
[ 0.047871] CPU: Physical Processor ID: 0
[ 0.047873] CPU: Processor Core ID: 0
[ 0.047878] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.047878] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.048391] mce: CPU supports 7 MCE banks
[ 0.048405] CPU0: Thermal monitoring enabled (TM1)
[ 0.048412] process: using mwait in idle threads
[ 0.048416] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.048416] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.048571] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
[ 0.058090] ftrace: allocating 30016 entries in 118 pages
[ 0.076033] dmar: Host address width 36
[ 0.076036] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.076050] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.076052] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.076059] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.076061] dmar: RMRR base: 0x000000ca395000 end: 0x000000ca3b1fff
[ 0.076063] dmar: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
[ 0.076138] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.076139] HPET id 0 under DRHD base 0xfed91000
[ 0.076141] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.076325] Enabled IRQ remapping in x2apic mode
[ 0.076327] Enabling x2apic
[ 0.076328] Enabled x2apic
[ 0.076337] Switched APIC routing to cluster x2apic.
[ 0.076821] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.116540] smpboot: CPU0: Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz (fam: 06, model: 3a, stepping: 09)
[ 0.116551] TSC deadline timer enabled
[ 0.116578] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.116603] ... version: 3
[ 0.116604] ... bit width: 48
[ 0.116606] ... generic registers: 4
[ 0.116607] ... value mask: 0000ffffffffffff
[ 0.116608] ... max period: 0000ffffffffffff
[ 0.116609] ... fixed-purpose events: 3
[ 0.116610] ... event mask: 000000070000000f
[ 0.117710] x86: Booting SMP configuration:
[ 0.117712] .... node #0, CPUs: #1
[ 0.131326] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.131444] #2 #3
[ 0.158845] x86: Booted up 1 node, 4 CPUs
[ 0.158849] smpboot: Total of 4 processors activated (19156.58 BogoMIPS)
[ 0.163660] devtmpfs: initialized
[ 0.167055] evm: security.selinux
[ 0.167057] evm: security.SMACK64
[ 0.167058] evm: security.SMACK64EXEC
[ 0.167059] evm: security.SMACK64TRANSMUTE
[ 0.167060] evm: security.SMACK64MMAP
[ 0.167061] evm: security.ima
[ 0.167062] evm: security.capability
[ 0.167130] PM: Registering ACPI NVS region [mem 0xc97be000-0xc9dbefff] (6295552 bytes)
[ 0.167222] PM: Registering ACPI NVS region [mem 0xca645000-0xca8c4fff] (2621440 bytes)
[ 0.167259] PM: Registering ACPI NVS region [mem 0xca8cb000-0xca90dfff] (274432 bytes)
[ 0.167450] pinctrl core: initialized pinctrl subsystem
[ 0.167577] RTC time: 17:46:46, date: 08/23/15
[ 0.167704] NET: Registered protocol family 16
[ 0.171480] cpuidle: using governor ladder
[ 0.175484] cpuidle: using governor menu
[ 0.175547] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.175549] ACPI: bus type PCI registered
[ 0.175552] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.175639] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.175642] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.175757] PCI: Using configuration type 1 for base access
[ 0.179955] ACPI: Added _OSI(Module Device)
[ 0.179957] ACPI: Added _OSI(Processor Device)
[ 0.179959] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.179961] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.182815] ACPI : EC: EC description table is found, configuring boot EC
[ 0.185749] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.299765] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.300375] ACPI: Dynamic OEM Table Load:
[ 0.300385] ACPI: SSDT 0xFFFF880129562000 000853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.301360] ACPI: Dynamic OEM Table Load:
[ 0.301366] ACPI: SSDT 0xFFFF880129522C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.302253] ACPI: Dynamic OEM Table Load:
[ 0.302258] ACPI: SSDT 0xFFFF88012951FE00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.303761] ACPI: Interpreter enabled
[ 0.303770] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.303776] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.303795] ACPI: (supports S0 S3 S4 S5)
[ 0.303797] ACPI: Using IOAPIC for interrupt routing
[ 0.303830] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.424402] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.424409] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.424700] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.424871] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.424873] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.425700] PCI host bridge to bus 0000:00
[ 0.425704] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.425707] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.425709] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.425711] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.425713] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.425715] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.425717] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.425718] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.425720] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
[ 0.425730] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.425849] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.425892] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.425947] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.425999] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.426013] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.426021] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.426028] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.426140] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.426153] pci 0000:00:04.0: reg 0x10: [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.426294] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.426319] pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
[ 0.426401] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.426457] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.426510] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.426537] pci 0000:00:16.0: reg 0x10: [mem 0xf7922000-0xf792200f 64bit]
[ 0.426624] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.426738] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.426762] pci 0000:00:1a.0: reg 0x10: [mem 0xf7920000-0xf79203ff]
[ 0.426865] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.426923] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.426974] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.426994] pci 0000:00:1b.0: reg 0x10: [mem 0xf7918000-0xf791bfff 64bit]
[ 0.427080] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.427137] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.427188] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.427331] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.427399] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.427451] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.427595] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.427663] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.427725] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.427749] pci 0000:00:1d.0: reg 0x10: [mem 0xf791f000-0xf791f3ff]
[ 0.427852] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.427915] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.427963] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.428173] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.428195] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.428204] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.428213] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.428223] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.428232] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.428242] pci 0000:00:1f.2: reg 0x24: [mem 0xf791e000-0xf791e7ff]
[ 0.428296] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.428395] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.428413] pci 0000:00:1f.3: reg 0x10: [mem 0xf791d000-0xf791d0ff 64bit]
[ 0.428437] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.428550] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.428574] pci 0000:00:1f.6: reg 0x10: [mem 0xf791c000-0xf791cfff 64bit]
[ 0.428785] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[ 0.428800] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.428813] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.428826] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.428835] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.428846] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.435938] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.435941] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.435944] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.435948] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.436043] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.436349] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000
[ 0.436537] pci 0000:03:00.0: reg 0x10: [mem 0xf7800000-0xf7801fff 64bit]
[ 0.437328] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.437484] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.444065] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.444075] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.500854] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.500919] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
[ 0.500981] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
[ 0.501041] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[ 0.501105] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.501166] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.501231] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[ 0.501290] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 0.501473] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.501557] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.501672] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.501674] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.501677] vgaarb: loaded
[ 0.501679] vgaarb: bridge control possible 0000:00:02.0
[ 0.501975] SCSI subsystem initialized
[ 0.502027] libata version 3.00 loaded.
[ 0.502055] ACPI: bus type USB registered
[ 0.502077] usbcore: registered new interface driver usbfs
[ 0.502087] usbcore: registered new interface driver hub
[ 0.502108] usbcore: registered new device driver usb
[ 0.502409] PCI: Using ACPI for IRQ routing
[ 0.504125] PCI: pci_cache_line_size set to 64 bytes
[ 0.504136] pci 0000:00:04.0: can't claim BAR 0 [mem 0xfed98000-0xfed9ffff 64bit]: no compatible bridge window
[ 0.504238] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.504240] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.504242] e820: reserve RAM buffer [mem 0xc97be000-0xcbffffff]
[ 0.504251] e820: reserve RAM buffer [mem 0xc9dd7000-0xcbffffff]
[ 0.504260] e820: reserve RAM buffer [mem 0xc9ddf000-0xcbffffff]
[ 0.504268] e820: reserve RAM buffer [mem 0xc9f3d000-0xcbffffff]
[ 0.504276] e820: reserve RAM buffer [mem 0xc9f8b000-0xcbffffff]
[ 0.504284] e820: reserve RAM buffer [mem 0xc9f94000-0xcbffffff]
[ 0.504292] e820: reserve RAM buffer [mem 0xc9fb5000-0xcbffffff]
[ 0.504299] e820: reserve RAM buffer [mem 0xc9fce000-0xcbffffff]
[ 0.504306] e820: reserve RAM buffer [mem 0xc9fdc000-0xcbffffff]
[ 0.504313] e820: reserve RAM buffer [mem 0xc9fec000-0xcbffffff]
[ 0.504320] e820: reserve RAM buffer [mem 0xc9ff8000-0xcbffffff]
[ 0.504326] e820: reserve RAM buffer [mem 0xca01c000-0xcbffffff]
[ 0.504332] e820: reserve RAM buffer [mem 0xca032000-0xcbffffff]
[ 0.504338] e820: reserve RAM buffer [mem 0xca045000-0xcbffffff]
[ 0.504343] e820: reserve RAM buffer [mem 0xca07f000-0xcbffffff]
[ 0.504349] e820: reserve RAM buffer [mem 0xca081000-0xcbffffff]
[ 0.504353] e820: reserve RAM buffer [mem 0xca084000-0xcbffffff]
[ 0.504358] e820: reserve RAM buffer [mem 0xca0a1000-0xcbffffff]
[ 0.504362] e820: reserve RAM buffer [mem 0xca8cb000-0xcbffffff]
[ 0.504364] e820: reserve RAM buffer [mem 0xcad1d000-0xcbffffff]
[ 0.504367] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.504369] e820: reserve RAM buffer [mem 0x12f200000-0x12fffffff]
[ 0.504498] NetLabel: Initializing
[ 0.504499] NetLabel: domain hash size = 128
[ 0.504500] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.504516] NetLabel: unlabeled traffic allowed by default
[ 0.504593] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.504600] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.506645] Switched to clocksource hpet
[ 0.513065] AppArmor: AppArmor Filesystem Enabled
[ 0.513145] pnp: PnP ACPI init
[ 0.513260] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.513264] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.566886] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.566889] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.566891] system 00:01: [io 0xffff] has been reserved
[ 0.566893] system 00:01: [io 0xffff] has been reserved
[ 0.566897] system 00:01: [io 0x0400-0x0453] could not be reserved
[ 0.566899] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.566902] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.566904] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.566907] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.566949] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.567011] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.567014] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.567071] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.567074] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.567154] pnp 00:05: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.567203] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.567464] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.567467] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.567470] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.567472] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.567476] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.567479] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.567481] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.567484] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.567486] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.567490] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.567493] system 00:07: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 0.567496] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.567597] system 00:08: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 0.567600] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.567783] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[ 0.567786] system 00:09: [mem 0x40004000-0x40004fff] has been reserved
[ 0.567789] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.567822] pnp: PnP ACPI: found 10 devices
[ 0.574760] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfe08000-0xcfe0ffff 64bit]
[ 0.574767] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.574770] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.574773] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.574777] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.574781] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.574801] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.574809] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.574823] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.574825] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.574827] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.574829] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.574831] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.574833] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.574835] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.574837] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
[ 0.574839] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.574841] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.574843] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.574846] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.574880] NET: Registered protocol family 2
[ 0.575075] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.575170] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.575241] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.575258] TCP: reno registered
[ 0.575268] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.575286] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.575336] NET: Registered protocol family 1
[ 0.575353] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.618927] PCI: CLS 64 bytes, default 64
[ 0.618981] Trying to unpack rootfs image as initramfs...
[ 1.006516] Freeing initrd memory: 19336K (ffff880035a2c000 - ffff880036d0e000)
[ 1.006547] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.006550] software IO TLB [mem 0xba268000-0xbe268000] (64MB) mapped at [ffff8800ba268000-ffff8800be267fff]
[ 1.006799] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 1.006904] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 1.006916] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[ 1.006927] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[ 1.006937] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[ 1.007002] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.007037] Scanning for low memory corruption every 60 seconds
[ 1.007428] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.007446] Initialise system trusted keyring
[ 1.007473] audit: initializing netlink subsys (disabled)
[ 1.007489] audit: type=2000 audit(1440352006.980:1): initialized
[ 1.007961] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.009750] zpool: loaded
[ 1.009754] zbud: loaded
[ 1.009951] VFS: Disk quotas dquot_6.5.2
[ 1.009992] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.010544] fuse init (API version 7.23)
[ 1.010715] Key type big_key registered
[ 1.011167] Key type asymmetric registered
[ 1.011170] Asymmetric key parser 'x509' registered
[ 1.011212] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.011256] io scheduler noop registered
[ 1.011259] io scheduler deadline registered (default)
[ 1.011295] io scheduler cfq registered
[ 1.011903] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.011922] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.011964] efifb: probing for efifb
[ 1.011987] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004780000, using 3072k, total 3072k
[ 1.011988] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.011989] efifb: scrolling: redraw
[ 1.011991] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.012087] Console: switching to colour frame buffer device 128x48
[ 1.012105] fb0: EFI VGA frame buffer device
[ 1.012116] intel_idle: MWAIT substates: 0x21120
[ 1.012118] intel_idle: v0.4 model 0x3A
[ 1.012119] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.012449] ACPI: AC Adapter [AC0] (on-line)
[ 1.012578] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.035249] ACPI: Lid Switch [LID]
[ 1.035299] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.035303] ACPI: Power Button [PWRB]
[ 1.035346] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.035349] ACPI: Sleep Button [SLPB]
[ 1.036332] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.036334] ACPI: Thermal Zone [THRM] (57 C)
[ 1.036378] GHES: HEST is not enabled!
[ 1.036499] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.039192] Linux agpgart interface v0.103
[ 1.040895] brd: module loaded
[ 1.041681] loop: module loaded
[ 1.041927] libphy: Fixed MDIO Bus: probed
[ 1.041930] tun: Universal TUN/TAP device driver, 1.6
[ 1.041931] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.041985] PPP generic driver version 2.4.2
[ 1.042183] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.042189] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.042298] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.042402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.042404] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.042406] usb usb1: Product: xHCI Host Controller
[ 1.042408] usb usb1: Manufacturer: Linux 3.19.0-26-generic xhci-hcd
[ 1.042410] usb usb1: SerialNumber: 0000:00:14.0
[ 1.042538] hub 1-0:1.0: USB hub found
[ 1.042552] hub 1-0:1.0: 4 ports detected
[ 1.042684] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.042688] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.042731] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.042733] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.042735] usb usb2: Product: xHCI Host Controller
[ 1.042736] usb usb2: Manufacturer: Linux 3.19.0-26-generic xhci-hcd
[ 1.042738] usb usb2: SerialNumber: 0000:00:14.0
[ 1.042844] hub 2-0:1.0: USB hub found
[ 1.042858] hub 2-0:1.0: 4 ports detected
[ 1.043009] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.043014] ehci-pci: EHCI PCI platform driver
[ 1.043202] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.043211] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.043225] ehci-pci 0000:00:1a.0: debug port 2
[ 1.047132] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.047175] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7920000
[ 1.059136] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.059197] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.059199] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.059201] usb usb3: Product: EHCI Host Controller
[ 1.059203] usb usb3: Manufacturer: Linux 3.19.0-26-generic ehci_hcd
[ 1.059205] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.059373] hub 3-0:1.0: USB hub found
[ 1.059381] hub 3-0:1.0: 2 ports detected
[ 1.059640] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.059646] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.059663] ehci-pci 0000:00:1d.0: debug port 2
[ 1.063564] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.063584] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf791f000
[ 1.075187] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.075264] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.075268] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.075272] usb usb4: Product: EHCI Host Controller
[ 1.075276] usb usb4: Manufacturer: Linux 3.19.0-26-generic ehci_hcd
[ 1.075279] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.075523] ACPI: Battery Slot [BAT0] (battery present)
[ 1.075733] hub 4-0:1.0: USB hub found
[ 1.075743] hub 4-0:1.0: 2 ports detected
[ 1.075864] ehci-platform: EHCI generic platform driver
[ 1.075876] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.075882] ohci-pci: OHCI PCI platform driver
[ 1.075896] ohci-platform: OHCI generic platform driver
[ 1.075906] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.075969] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.077779] i8042: Detected active multiplexing controller, rev 1.1
[ 1.078660] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.078665] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.078699] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.078723] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.078748] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.079027] mousedev: PS/2 mouse device common for all mice
[ 1.079489] rtc_cmos 00:02: RTC can wake from S4
[ 1.079671] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.079712] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.079733] i2c /dev entries driver
[ 1.079806] device-mapper: uevent: version 1.0.3
[ 1.079897] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 1.079916] Intel P-state driver initializing.
[ 1.080193] Consider also installing thermald for improved thermal control.
[ 1.080208] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.080226] EFI Variables Facility v0.08 2004-May-17
[ 1.115830] PCCT header not found.
[ 1.115831] ACPI PCC probe failed.
[ 1.115911] TCP: cubic registered
[ 1.115994] NET: Registered protocol family 10
[ 1.116231] NET: Registered protocol family 17
[ 1.116240] Key type dns_resolver registered
[ 1.116667] Loading compiled-in X.509 certificates
[ 1.117396] Loaded X.509 cert 'Magrathea: Glacier signing key: ed8339fd1a2f8dc0efdc5df7129dfb170a6f6dab'
[ 1.117413] registered taskstats version 1
[ 1.119005] Key type trusted registered
[ 1.121519] Key type encrypted registered
[ 1.121527] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.121531] ima: No TPM chip found, activating TPM-bypass!
[ 1.121551] evm: HMAC attrs: 0x1
[ 1.121914] Magic number: 11:779:795
[ 1.122006] rtc_cmos 00:02: setting system clock to 2015-08-23 17:46:47 UTC (1440352007)
[ 1.122059] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.122060] EDD information not available.
[ 1.122192] PM: Hibernation image not present or could not be loaded.
[ 1.122436] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[ 1.122437] Write protecting the kernel read-only data: 12288k
[ 1.122630] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[ 1.122715] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
[ 1.130709] systemd-udevd[117]: starting version 204
[ 1.131994] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.153757] ahci 0000:00:1f.2: version 3.0
[ 1.153934] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 1.153936] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.163225] scsi host0: ahci
[ 1.163419] scsi host1: ahci
[ 1.163515] scsi host2: ahci
[ 1.163617] scsi host3: ahci
[ 1.163935] scsi host4: ahci
[ 1.166122] scsi host5: ahci
[ 1.166170] ata1: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e100 irq 28
[ 1.166173] ata2: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e180 irq 28
[ 1.166174] ata3: DUMMY
[ 1.166175] ata4: DUMMY
[ 1.166176] ata5: DUMMY
[ 1.166177] ata6: DUMMY
[ 1.351434] usb 1-3: new low-speed USB device number 2 using xhci_hcd
[ 1.371452] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.387462] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.483546] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.484385] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.484602] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.484615] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.484664] usb 1-3: New USB device found, idVendor=046d, idProduct=c00f
[ 1.484666] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.484667] usb 1-3: Product: USB-PS/2 Optical Mouse
[ 1.484669] usb 1-3: Manufacturer: Logitech
[ 1.484863] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.485458] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[ 1.485462] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.486356] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.486491] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.486494] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.487306] ata1.00: configured for UDMA/133
[ 1.487426] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 A6C0 PQ: 0 ANSI: 5
[ 1.487611] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.487614] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.487629] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.487676] sd 0:0:0:0: [sda] Write Protect is off
[ 1.487679] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.487702] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.487966] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.491656] usbcore: registered new interface driver usbhid
[ 1.491669] usbhid: USB HID core driver
[ 1.492893] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C00F.0001/input/input12
[ 1.493009] hid-generic 0003:046D:C00F.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-3/input0
[ 1.504116] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.504119] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.504481] hub 3-1:1.0: USB hub found
[ 1.504717] hub 3-1:1.0: 6 ports detected
[ 1.519889] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.519891] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.520173] hub 4-1:1.0: USB hub found
[ 1.520247] hub 4-1:1.0: 6 ports detected
[ 1.570140] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 1.571291] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.775795] usb 3-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.791803] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
[ 1.793972] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f02)
[ 1.806530] psmouse serio4: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0e.
[ 1.868733] usb 3-1.4: New USB device found, idVendor=0bda, idProduct=0139
[ 1.868742] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.868747] usb 3-1.4: Product: USB2.0-CRW
[ 1.868752] usb 3-1.4: Manufacturer: Generic
[ 1.868756] usb 3-1.4: SerialNumber: 20100201396000000
[ 1.869004] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input11
[ 1.873304] usbcore: registered new interface driver rtsx_usb
[ 1.978457] usb 4-1.5: New USB device found, idVendor=04f2, idProduct=b330
[ 1.978467] usb 4-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.978472] usb 4-1.5: Product: USB2.0 HD UVC WebCam
[ 1.978476] usb 4-1.5: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.978480] usb 4-1.5: SerialNumber: 200901010001
[ 2.003987] tsc: Refined TSC clocksource calibration: 2394.558 MHz
[ 2.052032] usb 4-1.6: new full-speed USB device number 4 using ehci-pci
[ 2.148856] usb 4-1.6: New USB device found, idVendor=8087, idProduct=07da
[ 2.148865] usb 4-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.005028] Switched to clocksource tsc
[ 6.527818] ata2: link is slow to respond, please be patient (ready=0)
[ 11.179767] ata2: COMRESET failed (errno=-16)
[ 16.544328] ata2: link is slow to respond, please be patient (ready=0)
[ 21.196280] ata2: COMRESET failed (errno=-16)
[ 26.560838] ata2: link is slow to respond, please be patient (ready=0)
[ 35.910054] random: nonblocking pool is initialized
[ 56.266079] ata2: COMRESET failed (errno=-16)
[ 56.266136] ata2: limiting SATA link speed to 3.0 Gbps
[ 61.302357] ata2: COMRESET failed (errno=-16)
[ 61.302414] ata2: reset failed, giving up
[ 65.993797] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 76.463056] Adding 4077564k swap on /dev/sda7. Priority:-1 extents:1 across:4077564k FS
[ 76.575754] systemd-udevd[348]: starting version 204
[ 76.755001] lp: driver loaded but no devices found
[ 76.759031] ppdev: user-space parallel port driver
[ 76.817792] wmi: Mapper loaded
[ 76.836650] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 76.843883] [drm] Initialized drm 1.1.0 20060810
[ 76.858381] cfg80211: Calling CRDA to update world regulatory domain
[ 76.866915] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000044f (\GPIS) (20141107/utaddress-258)
[ 76.866921] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258)
[ 76.866926] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 76.866930] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20141107/utaddress-258)
[ 76.866933] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20141107/utaddress-258)
[ 76.866937] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 76.866939] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20141107/utaddress-258)
[ 76.866942] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20141107/utaddress-258)
[ 76.866946] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 76.866947] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20141107/utaddress-258)
[ 76.866951] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20141107/utaddress-258)
[ 76.866954] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 76.866956] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 76.869418] [drm] Memory usable by graphics device = 2048M
[ 76.869423] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 76.869425] fb: switching to inteldrmfb from EFI VGA
[ 76.869463] Console: switching to colour dummy device 80x25
[ 76.869553] [drm] Replacing VGA console driver
[ 76.873044] MXM: GUID detected in BIOS
[ 76.873091] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000003) is beyond end of object (length 0x0) (20141107/exoparg2-420)
[ 76.873098] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff88012a4b1348), AE_AML_PACKAGE_LIMIT (20141107/psparse-536)
[ 76.873110] ACPI: \_SB_.PCI0.GFX0: failed to evaluate _DSM (0x300b)
[ 76.873115] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 76.873204] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 76.873297] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power,
[ 76.873331] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000003) is beyond end of object (length 0x0) (20141107/exoparg2-420)
[ 76.873336] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff88012a4b1348), AE_AML_PACKAGE_LIMIT (20141107/psparse-536)
[ 76.873343] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP._DSM] (Node ffff88012a4c7ed8), AE_AML_PACKAGE_LIMIT (20141107/psparse-536)
[ 76.873351] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM (0x300b)
[ 76.873355] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 76.873441] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 76.873545] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
[ 76.873547] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 76.874674] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 76.874676] Copyright(c) 2003- 2014 Intel Corporation
[ 76.874848] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 76.884391] Bluetooth: Core ver 2.20
[ 76.884410] NET: Registered protocol family 31
[ 76.884412] Bluetooth: HCI device and connection manager initialized
[ 76.884416] Bluetooth: HCI socket layer initialized
[ 76.884419] Bluetooth: L2CAP socket layer initialized
[ 76.884425] Bluetooth: SCO socket layer initialized
[ 76.886818] usbcore: registered new interface driver btusb
[ 76.895781] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 76.895784] [drm] Driver supports precise vblank timestamp query.
[ 76.895969] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 76.927014] AVX version of gcm_enc/dec engaged.
[ 76.927017] AES CTR mode by8 optimization enabled
[ 76.956264] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 76.956827] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input13
[ 76.959619] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 76.960265] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14
[ 76.960391] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
[ 76.961086] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d7000a2
[ 76.961090] nouveau [ DEVICE][0000:01:00.0] Chipset: GF117 (NVD7)
[ 76.961092] nouveau [ DEVICE][0000:01:00.0] Family : NVC0
[ 76.973822] fbcon: inteldrmfb (fb0) is primary device
[ 76.984865] intel_rapl: Found RAPL domain package
[ 76.984866] intel_rapl: Found RAPL domain core
[ 76.984868] intel_rapl: Found RAPL domain uncore
[ 76.986844] nouveau [ VBIOS][0000:01:00.0] using image from ACPI
[ 76.986959] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 76.986961] nouveau [ VBIOS][0000:01:00.0] version 75.17.32.00.02
[ 76.988202] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 77.018916] asus_wmi: ASUS WMI generic driver loaded
[ 77.021027] asus_wmi: Initialization: 0x1
[ 77.021070] asus_wmi: BIOS WMI version: 7.9
[ 77.021166] asus_wmi: SFUN value: 0x4a2877
[ 77.023111] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input15
[ 77.037307] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 77.037308] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 77.037309] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 77.037310] sound hdaudioC0D0: mono: mono_out=0x0
[ 77.037310] sound hdaudioC0D0: inputs:
[ 77.037312] sound hdaudioC0D0: Mic=0x12
[ 77.046970] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 77.047048] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 77.065880] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 77.075637] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 77.075672] nouveau W[ PFB][0000:01:00.0][0x00000000][ffff8801292b5000] reclocking of this ram type unsupported
[ 77.075674] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 77.075674] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
[ 77.075675] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 77.079001] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 77.079003] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 77.079004] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 77.079005] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[ 77.079101] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 77.098356] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 77.107748] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 77.107762] nouveau [ PTHERM][0000:01:00.0] internal sensor: no
[ 77.107814] nouveau [ CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz
[ 77.107818] nouveau [ CLK][0000:01:00.0] 0f: core 625 MHz memory 900 MHz
[ 77.107969] nouveau [ CLK][0000:01:00.0] --: core 270 MHz memory 324 MHz
[ 77.111358] vga_switcheroo: enabled
[ 77.111424] [TTM] Zone kernel: Available graphics memory: 1965380 kiB
[ 77.111424] [TTM] Initializing pool allocator
[ 77.111428] [TTM] Initializing DMA pool allocator
[ 77.111434] nouveau [ DRM] VRAM: 1024 MiB
[ 77.111435] nouveau [ DRM] GART: 1048576 MiB
[ 77.111438] nouveau W[ DRM] Pointer to TMDS table invalid
[ 77.111439] nouveau [ DRM] DCB version 4.0
[ 77.111440] nouveau W[ DRM] Pointer to flat panel table invalid
[ 77.116994] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 77.116999] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 1
[ 77.179516] cfg80211: World regulatory domain updated:
[ 77.179517] cfg80211: DFS Master region: unset
[ 77.179517] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 77.179519] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 77.179519] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 77.179520] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 77.179521] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 77.179522] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 77.188660] asus_wmi: Backlight controlled by ACPI video driver
[ 77.233401] media: Linux media interface: v0.10
[ 77.238725] Linux video capture interface: v2.00
[ 77.244689] audit: type=1400 audit(1440344883.554:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=477 comm="apparmor_parser"
[ 77.244695] audit: type=1400 audit(1440344883.554:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=477 comm="apparmor_parser"
[ 77.244699] audit: type=1400 audit(1440344883.554:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=477 comm="apparmor_parser"
[ 77.245166] audit: type=1400 audit(1440344883.554:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=477 comm="apparmor_parser"
[ 77.245171] audit: type=1400 audit(1440344883.554:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=477 comm="apparmor_parser"
[ 77.245411] audit: type=1400 audit(1440344883.554:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=477 comm="apparmor_parser"
[ 77.248689] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b330)
[ 77.259483] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input18
[ 77.259554] usbcore: registered new interface driver uvcvideo
[ 77.259554] USB Video Class driver (1.1.1)
[ 77.417902] usb 4-1.6: USB disconnect, device number 4
[ 78.397458] Console: switching to colour frame buffer device 240x67
[ 78.403960] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 78.403961] i915 0000:00:02.0: registered panic notifier
[ 78.765280] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 81.742702] init: failsafe main process (722) killed by TERM signal
[ 82.042419] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 82.042422] Bluetooth: BNEP filters: protocol multicast
[ 82.042426] Bluetooth: BNEP socket layer initialized
[ 82.053854] Bluetooth: RFCOMM TTY layer initialized
[ 82.053861] Bluetooth: RFCOMM socket layer initialized
[ 82.053867] Bluetooth: RFCOMM ver 1.11
[ 82.065146] audit: type=1400 audit(1440344888.370:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=871 comm="apparmor_parser"
[ 82.065152] audit: type=1400 audit(1440344888.370:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=871 comm="apparmor_parser"
[ 82.065479] audit: type=1400 audit(1440344888.370:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=871 comm="apparmor_parser"
[ 82.071268] audit: type=1400 audit(1440344888.374:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=883 comm="apparmor_parser"
[ 82.281012] init: cups main process (873) killed by HUP signal
[ 82.281025] init: cups main process ended, respawningQuant au boot-info, je l'avais mis en lien : http://paste.ubuntu.com/12124094/
Je pense qu'il perd du temps à checker ce 2ème slot pour disque dur (existe-t-il seulement ? je n'ai même pas un trappe pour vérifier. Il apparaît dans le bios -- vide bien sûr -- mais je n'en connaissais pas l'existence). Y a-t-il un moyen de lui indiquer de ne pas le vérifier ? (par le bios, il n'y a pas de choix)
Merci d'avance
Virginie
Hors ligne
#10 Le 01/09/2015, à 17:49
- djinnie
Re : blocage sur BusyBox à chaque démarrage
Hello tous,
Une petite relance, car je n'ai toujours pas d'idée pour empêcher cette vérification infructueuse du ata2 (mais visiblement inutile puisque tout fonctionne) au démarrage d'Ubuntu.
L'un de vous saurait-il m'aider ?
Merci d'avance
Virginie
Hors ligne
#11 Le 10/09/2015, à 13:27
- moko138
Re : blocage sur BusyBox à chaque démarrage
djinnie : C'est un problème de contacts (ou de nappe) Sata. À nettoyer (ou remplacer).
C'est une tour ou un portable, ton "zenbook" ?
(Je ne sais pas pourquoi, je n'avais pas vu tes 2 derniers messages 
)
amigeorges proche : merci de respecter le règlement et d'ouvrir ton propre fil.
Dernière modification par moko138 (Le 10/09/2015, à 13:29)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#12 Le 12/09/2015, à 02:03
- djinnie
Re : blocage sur BusyBox à chaque démarrage
Merci Moko pour cette réponse, mais ce 2ème disque dur n'existe pas et je ne suis même pas sûre que le slot existe... car évidemment mon zenbook est un portable (asus). Je pourrais évidemment me lancer à l'ouvrir, mais je préférerais sauter cette vérification puisqu'il n'y a rien à vérifier.
Est ce possible de configurer le grub ou je ne sais quoi pour sauter cette étape ?
Merci d'avance
Dernière modification par djinnie (Le 12/09/2015, à 02:04)
Virginie
Hors ligne
#13 Le 12/09/2015, à 04:48
- moko138
Re : blocage sur BusyBox à chaque démarrage
djinnie a écrit :
Est ce possible de configurer le grub ou je ne sais quoi pour sauter cette étape ?
Non.
Sauf si tu découvres une méthode pour nettoyer logiciellement des contacts.
moko a écrit :
C'est un problème de contacts (ou de nappe) Sata. À nettoyer (ou remplacer).
Prendre un petit tournevis cruciforme.
Ouvrir la trappe du disque et extraire ce dernier.
Nettoyer les contacts, côté disque et côté nappe.
Remonter.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#14 Le 18/09/2015, à 22:05
- djinnie
Re : blocage sur BusyBox à chaque démarrage
Merci Moko pour l'indication des contacts, je m'y lancerai peut-être (bien que c'est plus compliqué que ça n'y parait car cette s***ie de zenbook que j'ai acheté un peu trop vite par internet n'a aucune trappe et des micro vis en étoile...) mais je ne comprends pas cette référence à un ata2, sachant que je n'ai qu'un seul disque qu'Ubuntu appelle sda1... et qu'il y a bien une ata1 :
[ 1.166170] ata1: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e100 irq 28
[ 1.166173] ata2: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e180 irq 282 disques avec beaucoup de paramètres en commun... est-ce classique ?
Merci d'avance
PS je ne comprends pas bien quand je reçois une email ou non pour m'avertir d'une réponse...
Virginie
Hors ligne
#15 Le 19/09/2015, à 09:13
- moko138
Re : blocage sur BusyBox à chaque démarrage
"micro vis en étoile" : communément appelés vis Torx (nom de marque).
Attention il y en a 2 types principaux : avec ou sans tenon central.
Avec tenon, tu es obligée d'avoir les tournevis ad hoc,
sans, tu peux tenter ta chance avec un tournevis plat. (Et en profiter pour remplacer les vis torx par des cruciformes, si tu en as sous la main )
Et arrête de supposer que ata2 réfère à un 2ème disque !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#16 Le 19/09/2015, à 09:31
- Bougron
Re : blocage sur BusyBox à chaque démarrage
Bougron a écrit :
Bonsoir.
Comme tu détestes windows, j'espère que tu vas adorer 'BusyBox". Il parait que c'est sa façon de nous souhaiter la bienvenue.
Au fait, est-ce windows fonctionne encore ?
Dernière modification par Bougron (Le 19/09/2015, à 09:32)
Hors ligne
#17 Le 19/09/2015, à 09:41
- Bougron
Re : blocage sur BusyBox à chaque démarrage
moko138 a écrit :
134MB Microsoft reserved partition msftresest une partition nécessaire à windows pour, officiellement, gérer les repartitionnements des disques gpt. Elle fait toujours 134 Mo/128 Mio. Plus de détails là : https://msdn.microsoft.com/en-us/librar … 85%29.aspx
Bonjour moko138
Si tu as envie d'en connaitre plus sur l'utilité de cette partition. C'est ici.
Hors ligne
#18 Le 20/09/2015, à 23:01
- djinnie
Re : blocage sur BusyBox à chaque démarrage
OK Moko, j'essaie ASAP... et je te donne des nouvelles !
Bougron, oui Windows fonctionne toujours, je n'ai pas le choix, je n'ai pas trouvé d'équivalent à ma compta et elle ne tourne pas sous Wine.
L'ensemble est lent (sous Windows comme sous Ubuntu), les appli plantent régulièrement (surtout Firefox) pourtant mon ordi n'a même pas 3 ans, j'ai donc l'espoir qu'un petit nettoyage lui fera effectivement du bien (ça doit ressembler à un sac d'aspirateur là-dedans !)
Virginie
Hors ligne
#19 Le 20/09/2015, à 23:46
- moko138
Re : blocage sur BusyBox à chaque démarrage
J'ignore ce que tu appelles "ASAP".
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#20 Le 20/09/2015, à 23:52
- djinnie
Re : blocage sur BusyBox à chaque démarrage
Heu. .. Dès que possible. .. pardon pour ľanglissisme (ASAP=as soon as possible)
Virginie
Hors ligne
#21 Le 07/10/2015, à 16:14
- djinnie
Re : blocage sur BusyBox à chaque démarrage
Bonjour,
Je reviens vous vous, car, bien que j'ai ouvert le ventre de mon Zenbook et tenté d'y passer un coup de balai, j'ai toujours le même souci au démarrage de blocage en attente d'une réponse d'un curieux ata2...
J'ai aussi dans mon bios (mais je n'ai pas trouvé où dans le monde réel) un slot vide pour un 2ème disque dur...
Tout le reste fonctionne, j'aimerais juste gagner un peu de temps au démarrage !
L'idéal pour moi serait d'indiquer à Ubuntu de ne pas checker cet ata2
Une idée ?
Merci d'avance
Virginie
Hors ligne
#22 Le 07/10/2015, à 17:52
- moko138
Re : blocage sur BusyBox à chaque démarrage
Note qu'Ubuntu en cherche six dont 4 "dummy" (bidon)
[ 1.166170] ata1: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e100 irq 28
[ 1.166173] ata2: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e180 irq 28
[ 1.166174] ata3: DUMMY
[ 1.166175] ata4: DUMMY
[ 1.166176] ata5: DUMMY
[ 1.166177] ata6: DUMMY
Si ton bios ne te permet pas de blacklister le 2nd emplacement (réel ou pas), donne le nom complet de ton Asus Zenbook, tel qu'écrit sous le portable... ou dans le bios.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#23 Le 07/10/2015, à 18:34
- djinnie
Re : blocage sur BusyBox à chaque démarrage
C'est un Zenbook UX32V
Virginie
Hors ligne
#24 Le 07/10/2015, à 19:09
- moko138
Re : blocage sur BusyBox à chaque démarrage
nom complet, genre Zenbook UX32V-12KL.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#25 Le 07/10/2015, à 21:23
- djinnie
Re : blocage sur BusyBox à chaque démarrage
Hum... je vois pas où le trouver...
Derrière ou dans le bios, je ne vois rien de plus et rien n'est affiché au démarrage
http://famille.levenok.free.fr/portable.jpg
http://famille.levenok.free.fr/bios.jpg
Merci de respecter les règles du forum, la taille des images est limitée. --> rectifié
Dernière modification par djinnie (Le 08/10/2015, à 11:56)
Virginie
Hors ligne