Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 01/10/2015, à 15:25

PaulNewbie

Problème passage mode graphique Ubuntu 14.04

Bonjour,

J'ai cherché sur ce forum la solution à mon problème sans la trouver, je vous explique donc mon problème en espérant que vous aurez une solution, merci d'avance !

J'ai installé Ubuntu 14.04 à côté de mon Windows 8 il y a peu de temps, tout marchait très bien (j'en faisais une utilisation basique : internet, éditions de textes...), mais dernièrement j'ai du faire une bêtise (peut-être en essayant d'installer certains packages à la main, je ne sais pas) car j'ai un problème.

En effet lorsque je démarre Ubuntu en choisissant "Ubuntu" depuis le menu grub, j'arrive comme il se doit sur un écran d'unity me demandant mon mot de passe pour ouvrir une session. Or en mettant le bon mot de passe (aucun doute là-dessus) j'appuie sur entrée, puis l'écran devient noir et revient au point de départ (page où je dois taper mon mot de passe). Pareil si je lance une session "invité", impossible donc d'ouvrir une session depuis l'interface unity.

J'ai donc essayé, depuis ce menu de démarrage de session, de faire "ctrl+alt+f1", ce qui me fait passer en mode ligne de commande et là je peux me connecter avec mes login et password habituels. La connexion se passe sans problème et je peux accéder à mes fichiers en mode ligne de commande mais lorsque je veux revenir à l'interface graphique d'Ubuntu avec la commande "startx" ça ne marche pas et je reçois la réponse suivante (je l'ai réécrite ici, je n'ai pas pu la copier directement j'espère qu'il n'y a pas de faute) :

X.Org X Server 1.16.0
Release Date: 2014-07-16
X Protocol VErsion 11, Revision 0
Build Operating System: Linus 3.2.0-70-generic x06_64 Ubuntu
Current Operating System: Linus platzer-X450LCP 3.16.0-49-generic #65~14.04.1-Ubuntu SMP Wed Sep 9 10:03:23 UTC 2015 x86_64
Kernel command line: B00T_IMAGE=/boot/vmlinuz-3.16.0-49-generic.efi.signed root=UUID=a150c545-9ece-4568-9975-46fb54f4c2de ro quiet splash vt.handoff
Build Date: 12 February 2015 11:11:26PM
xorg-server 2:1.16.0-1ubuntu1.2~trusty2 (For technical support please see [url]http://www.ubuntu.com/support)[/url]
Current version of pixman: 0.30.2
             Before reporting problems, check [url]http://wiki.x.org[/url]
             to make sure that you have the latest version.[/b]

[b]Markers: (--) probed, (**) from config file, (==) default setting
              (++) from command line, (!!) notice, (II) informational,
              (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Thu Oct 1 10:55:36 2015
(==) Using system config directory "/usr/share/X11/worg.conf.d"
TheXKEYBOARD keymap compiler (xkbcomp) reports:
> Warning :           Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                            Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
xinit: connection to X server lost
waiting for X server to shut down ..(EE) Server terminated successfully (0). Closing log file.

Au cas où, voici des informations sur ma machine.

-Processeur : Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz 2.30GHz
-Ram : 8Go
-Système 64 bits, processeur x64



PS : J'ai hésité à mettre ce post dans les sections "Affichage et cartes graphiques" ou encore "Unity"...


Modération : merci à l'avenir d'utiliser les balises code (explications ici) plutôt que du gras.

Dernière modification par cqfd93 (Le 01/10/2015, à 19:45)

Hors ligne

#2 Le 01/10/2015, à 18:38

olivi4

Re : Problème passage mode graphique Ubuntu 14.04

Bonjour,

Est-ce que tu a essayé de démarrer sur le noyau précédent ? Depuis Grub, je crois que c'est la deuxième ligne...

La philosophie nous enseigne à douter de ce qui nous paraît évident. La propagande, au contraire, nous enseigne à accepter pour évident ce dont il serait raisonnable de douter. (Aldous Huxley)
"La plus grande partie de la souffrance humaine est inutile. On se l'inflige à soi-même aussi longtemps que, à son insu, on laisse le mental prendre le contrôle de sa vie". (E. Tolle)

Hors ligne

#3 Le 02/10/2015, à 18:48

PaulNewbie

Re : Problème passage mode graphique Ubuntu 14.04

Bonjour olivi4,

J'ai essayé de faire ce que tu me dis, donc depuis le menu grub je fais "Options avancées pour Ubuntu" puis  j'ai quatre choix :
-Ubuntu, avec Linux 3.16.0-49-generic
-Ubuntu, with Linux 3.16.0-49-generic (recovery mode)
-Ubuntu, avec Linux 3.16.0-30-generic
-Ubuntu, with Linux 3.16.0-30-generic (recovery mode)

Tout d'abord, quand je sélectionne le premier tout se passe bien et j'arrive au même problème que d'habitude (ouvrir session possible mais passage au mode graphique avec "startx" impossible). Ensuite j'ai fais ce que tu m'invitais à faire, c'est à dire le 3e choix de la liste des 4 précédents, et là ça bloque après les deux lignes suivantes :
"Chargement de Linux 3.16.0-30-generic...
Chargement du disque mémoire initial...
_"

5 minutes d'attente sans que rien ne se passe, j'éteins donc l'ordinateur de force. J'allume ensuite et cette fois-ci je sélectionne l'option "Ubuntu, with Linux 3.16.0-30-generic (recovery mode)", je réobtiens les deux lignes sur lesquelles je bloquais avant mais cette fois-ci sans blocage, et j'arrive sur un menu d'Unity d'ouverture de session pour retrouver le même problème qu'au tout début : impossible d'ouvrir une session en mode graphique et une fois la session ouvert en mode ligne de commande la commande "startx" redonne le même message d'erreur (à quelques petits détails près mais qui ne semblent pas dire que le comportement est différent, par exemple les "3.16.0-49-generic" sont remplacés par des "3.16.0-30-generic").

Voici le contenu du fichier log "/var/log/Xorg.1.log", si cela peut vous aider à m'aider !

[    40.281]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[    40.281] X Protocol Version 11, Revision 0
[    40.281] Build Operating System: Linux 3.2.0-70-generic x86_64 Ubuntu
[    40.281] Current Operating System: Linux platzer-X450LCP 3.16.0-49-generic #65~14.04.1-Ubuntu SMP Wed Sep 9 10:03:23 UTC 2015 x86_64
[    40.281] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-49-generic.efi.signed root=UUID=a150c545-9ece-4568-9975-46fb54f4c2de ro quiet splash vt.handoff=7
[    40.281] Build Date: 12 February 2015  11:11:26PM
[    40.281] xorg-server 2:1.16.0-1ubuntu1.2~trusty2 (For technical support please see http://www.ubuntu.com/support)
[    40.281] Current version of pixman: 0.30.2
[    40.281]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    40.281] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    40.282] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Oct  1 18:28:58 2015
[    40.282] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    40.282] (==) No Layout section.  Using the first Screen section.
[    40.282] (==) No screen section available. Using defaults.
[    40.282] (**) |-->Screen "Default Screen Section" (0)
[    40.282] (**) |   |-->Monitor "<default monitor>"
[    40.282] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    40.282] (==) Automatically adding devices
[    40.282] (==) Automatically enabling devices
[    40.282] (==) Automatically adding GPU devices
[    40.282] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    40.282]    Entry deleted from font path.
[    40.282] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    40.282]    Entry deleted from font path.
[    40.282] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    40.282]    Entry deleted from font path.
[    40.282] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    40.282]    Entry deleted from font path.
[    40.282] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    40.282]    Entry deleted from font path.
[    40.282] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/Type1,
        built-ins
[    40.282] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    40.282] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    40.282] (II) Loader magic: 0x7f2bb0df8c80
[    40.282] (II) Module ABI versions:
[    40.282]    X.Org ANSI C Emulation: 0.4
[    40.282]    X.Org Video Driver: 18.0
[    40.282]    X.Org XInput driver : 21.0
[    40.282]    X.Org Server Extension : 8.0
[    40.282] (II) xfree86: Adding drm device (/dev/dri/card0)
[    40.282] (II) xfree86: Adding drm device (/dev/dri/card1)
[    40.859] (--) PCI:*(0:0:2:0) 8086:0a16:1043:13fd rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    40.860] (--) PCI: (0:4:0:0) 10de:1140:1043:13fd rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[    40.860] (II) LoadModule: "glx"
[    40.860] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    40.860] (EE) Failed to load /usr/lib/xorg/modules/extensions/libglx.so: libGL.so.1: cannot open shared object file: No such file or directory
[    40.860] (II) UnloadModule: "glx"
[    40.860] (II) Unloading glx
[    40.860] (EE) Failed to load module "glx" (loader failed, 7)
[    40.860] (==) Matched intel as autoconfigured driver 0
[    40.860] (==) Matched nvidia as autoconfigured driver 1
[    40.860] (==) Matched nouveau as autoconfigured driver 2
[    40.860] (==) Matched intel as autoconfigured driver 3
[    40.860] (==) Matched modesetting as autoconfigured driver 4
[    40.860] (==) Matched fbdev as autoconfigured driver 5
[    40.860] (==) Matched vesa as autoconfigured driver 6
[    40.860] (==) Assigned the driver to the xf86ConfigLayout
[    40.860] (II) LoadModule: "intel"
[    40.860] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    40.860] (II) Module intel: vendor="X.Org Foundation"
[    40.860]    compiled for 1.16.0, module version = 2.99.914
[    40.860]    Module class: X.Org Video Driver
[    40.860]    ABI class: X.Org Video Driver, version 18.0
[    40.860] (II) LoadModule: "nvidia"
[    40.860] (WW) Warning, couldn't open module nvidia
[    40.860] (II) UnloadModule: "nvidia"
[    40.860] (II) Unloading nvidia
[    40.860] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    40.861] (II) LoadModule: "nouveau"
[    40.861] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    40.861] (II) Module nouveau: vendor="X.Org Foundation"
[    40.861]    compiled for 1.16.0, module version = 1.0.11
[    40.861]    Module class: X.Org Video Driver
[    40.861]    ABI class: X.Org Video Driver, version 18.0
[    40.861] (II) LoadModule: "modesetting"
[    40.861] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    40.861] (II) Module modesetting: vendor="X.Org Foundation"
[    40.861]    compiled for 1.16.0, module version = 0.9.0
[    40.861]    Module class: X.Org Video Driver
[    40.861]    ABI class: X.Org Video Driver, version 18.0
[    40.861] (II) LoadModule: "fbdev"
[    40.861] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    40.861] (II) Module fbdev: vendor="X.Org Foundation"
[    40.861]    compiled for 1.16.0, module version = 0.4.4
[    40.861]    Module class: X.Org Video Driver
[    40.861]    ABI class: X.Org Video Driver, version 18.0
[    40.861] (II) LoadModule: "vesa"
[    40.861] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    40.861] (II) Module vesa: vendor="X.Org Foundation"
[    40.861]    compiled for 1.16.0, module version = 2.3.3
[    40.861]    Module class: X.Org Video Driver
[    40.861]    ABI class: X.Org Video Driver, version 18.0
[    40.861] (==) Matched intel as autoconfigured driver 0
[    40.861] (==) Matched nvidia as autoconfigured driver 1
[    40.861] (==) Matched nouveau as autoconfigured driver 2
[    40.861] (==) Matched intel as autoconfigured driver 3
[    40.861] (==) Matched modesetting as autoconfigured driver 4
[    40.861] (==) Matched fbdev as autoconfigured driver 5
[    40.861] (==) Matched vesa as autoconfigured driver 6
[    40.861] (==) Assigned the driver to the xf86ConfigLayout
[    40.861] (II) LoadModule: "intel"
[    40.861] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    40.861] (II) Module intel: vendor="X.Org Foundation"
[    40.861]    compiled for 1.16.0, module version = 2.99.914
[    40.861]    Module class: X.Org Video Driver
[    40.861]    ABI class: X.Org Video Driver, version 18.0
[    40.861] (II) UnloadModule: "intel"
[    40.861] (II) Unloading intel
[    40.861] (II) Failed to load module "intel" (already loaded, 32555)
[    40.861] (II) LoadModule: "nvidia"
[    40.862] (WW) Warning, couldn't open module nvidia
[    40.862] (II) UnloadModule: "nvidia"
[    40.862] (II) Unloading nvidia
[    40.862] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    40.862] (II) LoadModule: "nouveau"
[    40.862] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    40.862] (II) Module nouveau: vendor="X.Org Foundation"
[    40.862]    compiled for 1.16.0, module version = 1.0.11
[    40.862]    Module class: X.Org Video Driver
[    40.862]    ABI class: X.Org Video Driver, version 18.0
[    40.862] (II) UnloadModule: "nouveau"
[    40.862] (II) Unloading nouveau
[    40.862] (II) Failed to load module "nouveau" (already loaded, 0)
[    40.862] (II) LoadModule: "modesetting"
[    40.862] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    40.862] (II) Module modesetting: vendor="X.Org Foundation"
[    40.862]    compiled for 1.16.0, module version = 0.9.0
[    40.862]    Module class: X.Org Video Driver
[    40.862]    ABI class: X.Org Video Driver, version 18.0
[    40.862] (II) UnloadModule: "modesetting"
[    40.862] (II) Unloading modesetting
[    40.862] (II) Failed to load module "modesetting" (already loaded, 0)
[    40.862] (II) LoadModule: "fbdev"
[    40.862] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    40.862] (II) Module fbdev: vendor="X.Org Foundation"
[    40.862]    compiled for 1.16.0, module version = 0.4.4
[    40.862]    Module class: X.Org Video Driver
[    40.862]    ABI class: X.Org Video Driver, version 18.0
[    40.862] (II) UnloadModule: "fbdev"
[    40.862] (II) Unloading fbdev
[    40.862] (II) Failed to load module "fbdev" (already loaded, 0)
[    40.862] (II) LoadModule: "vesa"
[    40.862] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    40.862] (II) Module vesa: vendor="X.Org Foundation"
[    40.862]    compiled for 1.16.0, module version = 2.3.3
[    40.862]    Module class: X.Org Video Driver
[    40.862]    ABI class: X.Org Video Driver, version 18.0
[    40.862] (II) UnloadModule: "vesa"
[    40.862] (II) Unloading vesa
[    40.862] (II) Failed to load module "vesa" (already loaded, 0)
[    40.862] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
        i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
        915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
        Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    40.862] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    40.862] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    40.862] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    40.862] (II) NOUVEAU driver Date:   Thu Aug 28 03:57:48 2014 +0200
[    40.862] (II) NOUVEAU driver for NVIDIA chipset families :
[    40.862]    RIVA TNT        (NV04)
[    40.862]    RIVA TNT2       (NV05)
[    40.862]    GeForce 256     (NV10)
[    40.862]    GeForce 2       (NV11, NV15)
[    40.862]    GeForce 4MX     (NV17, NV18)
[    40.862]    GeForce 3       (NV20)
[    40.862]    GeForce 4Ti     (NV25, NV28)
[    40.862]    GeForce FX      (NV3x)
[    40.862]    GeForce 6       (NV4x)
[    40.862]    GeForce 7       (G7x)
[    40.862]    GeForce 8       (G8x)
[    40.862]    GeForce GTX 200 (NVA0)
[    40.862]    GeForce GTX 400 (NVC0)
[    40.862] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    40.863] (II) FBDEV: driver for framebuffer: fbdev
[    40.863] (II) VESA: driver for VESA chipsets: vesa
[    40.863] (--) using VT number 8

[    40.865] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[    40.865] (II) intel(0): SNA compiled: xserver-xorg-video-intel-lts-utopic 2:2.99.914-1~exp1ubuntu4.5~trusty1 (Timo Aaltonen <tjaalton@debian.org>)
[    40.865] (II) intel(0): SNA compiled for use with valgrind
[    40.866] (II) [drm] nouveau interface version: 1.1.2
[    40.866] (WW) Falling back to old probe method for modesetting
[    40.866] (WW) Falling back to old probe method for fbdev
[    40.866] (II) Loading sub module "fbdevhw"
[    40.866] (II) LoadModule: "fbdevhw"
[    40.866] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    40.866] (II) Module fbdevhw: vendor="X.Org Foundation"
[    40.866]    compiled for 1.16.0, module version = 0.0.2
[    40.866]    ABI class: X.Org Video Driver, version 18.0
[    40.866] (WW) Falling back to old probe method for vesa
[    40.866] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[    40.866] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[    40.866] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    40.866] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    40.866] (==) intel(0): RGB weight 888
[    40.867] (==) intel(0): Default visual is TrueColor
[    40.867] (II) intel(0): Output eDP1 has no monitor section
[    40.867] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    40.867] (II) intel(0): Output DP1 has no monitor section
[    40.867] (II) intel(0): Output HDMI1 has no monitor section
[    40.867] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    40.867] (II) intel(0): Output VIRTUAL1 has no monitor section
[    40.867] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[    40.867] (==) intel(0): TearFree disabled
[    40.867] (==) intel(0): DPI set to (96, 96)
[    40.867] (II) Loading sub module "dri2"
[    40.867] (II) LoadModule: "dri2"
[    40.867] (II) Module "dri2" already built-in
[    40.867] (II) Loading sub module "present"
[    40.867] (II) LoadModule: "present"
[    40.867] (II) Module "present" already built-in
[    40.867] (II) Loading sub module "dri2"
[    40.867] (II) LoadModule: "dri2"
[    40.867] (II) Module "dri2" already built-in
[    40.867] (--) NOUVEAU(G0): Chipset: "NVIDIA NVD7"
[    40.867] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[    40.867] (==) NOUVEAU(G0): RGB weight 888
[    40.867] (==) NOUVEAU(G0): Default visual is TrueColor
[    40.867] (==) NOUVEAU(G0): Using HW cursor
[    40.867] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
[    40.867] (==) NOUVEAU(G0): Page flipping enabled
[    40.867] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]
[    40.867] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.
[    40.867] (==) NOUVEAU(G0): Using gamma correction (1.0, 1.0, 1.0)
[    40.867] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[    40.867] (**) NOUVEAU(G0):  Mode "1366x768": 84.8 MHz (scaled from 0.0 MHz), 47.7 kHz, 59.8 Hz
[    40.867] (II) NOUVEAU(G0): Modeline "1366x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
[    40.867] (==) NOUVEAU(G0): DPI set to (96, 96)
[    40.867] (II) Loading sub module "fb"
[    40.867] (II) LoadModule: "fb"
[    40.867] (II) Loading /usr/lib/xorg/modules/libfb.so
[    40.868] (II) Module fb: vendor="X.Org Foundation"
[    40.868]    compiled for 1.16.0, module version = 1.0.0
[    40.868]    ABI class: X.Org ANSI C Emulation, version 0.4
[    40.868] (II) Loading sub module "shadowfb"
[    40.868] (II) LoadModule: "shadowfb"
[    40.868] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    40.868] (II) Module shadowfb: vendor="X.Org Foundation"
[    40.868]    compiled for 1.16.0, module version = 1.0.0
[    40.868]    ABI class: X.Org ANSI C Emulation, version 0.4
[    40.868] (II) UnloadModule: "modesetting"
[    40.868] (II) Unloading modesetting
[    40.868] (II) UnloadModule: "fbdev"
[    40.868] (II) Unloading fbdev
[    40.868] (II) UnloadSubModule: "fbdevhw"
[    40.868] (II) Unloading fbdevhw
[    40.868] (II) UnloadModule: "vesa"
[    40.868] (II) Unloading vesa
[    40.868] (==) Depth 24 pixmap format is 32 bpp
[    40.879] (II) NOUVEAU(G0): Channel setup complete.
[    40.881] (II) NOUVEAU(G0): [COPY] async initialised.
[    40.881] (II) NOUVEAU(G0): [DRI2] Setup complete
[    40.881] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau
[    40.881] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau
[    40.881] (II) Loading sub module "exa"
[    40.881] (II) LoadModule: "exa"
[    40.881] (II) Loading /usr/lib/xorg/modules/libexa.so
[    40.881] (II) Module exa: vendor="X.Org Foundation"
[    40.881]    compiled for 1.16.0, module version = 2.6.0
[    40.881]    ABI class: X.Org Video Driver, version 18.0
[    40.881] (II) EXA(256): Driver allocated offscreen pixmaps
[    40.881] (II) EXA(256): Driver registered support for the following operations:
[    40.881] (II)         Solid
[    40.881] (II)         Copy
[    40.881] (II)         Composite (RENDER acceleration)
[    40.881] (II)         UploadToScreen
[    40.881] (II)         DownloadFromScreen
[    40.881] (==) NOUVEAU(G0): Backing store enabled
[    40.881] (==) NOUVEAU(G0): Silken mouse enabled
[    40.882] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    40.882] (EE) NOUVEAU(G0): [XvMC] Failed to initialize extension.
[    40.882] (==) NOUVEAU(G0): DPMS enabled
[    40.882] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    40.882] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[    40.882] (==) intel(0): Backing store enabled
[    40.882] (==) intel(0): Silken mouse enabled
[    40.882] (II) intel(0): HW Cursor enabled
[    40.882] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    40.882] (==) intel(0): DPMS enabled
[    40.882] (II) intel(0): [DRI2] Setup complete
[    40.882] (II) intel(0): [DRI2]   DRI driver: i965
[    40.882] (II) intel(0): [DRI2]   VDPAU driver: i965
[    40.882] (II) intel(0): direct rendering: DRI2 enabled
[    40.882] (II) intel(0): hardware support for Present enabled
[    40.882] (==) intel(0): display hotplug detection enabled
[    40.882] (--) RandR disabled
[    40.894] (II) NOUVEAU(G0): NVEnterVT is called.
[    40.895] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    40.904] (II) intel(0): Setting screen physical size to 361 x 203
[    40.910] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    40.965] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    40.965] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    40.965] (II) LoadModule: "evdev"
[    40.965] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.965] (II) Module evdev: vendor="X.Org Foundation"
[    40.965]    compiled for 1.16.0, module version = 2.9.0
[    40.965]    Module class: X.Org XInput Driver
[    40.965]    ABI class: X.Org XInput driver, version 21.0
[    40.965] (II) Using input driver 'evdev' for 'Power Button'
[    40.965] (**) Power Button: always reports core events
[    40.965] (**) evdev: Power Button: Device: "/dev/input/event2"
[    40.965] (--) evdev: Power Button: Vendor 0 Product 0x1
[    40.965] (--) evdev: Power Button: Found keys
[    40.965] (II) evdev: Power Button: Configuring as keyboard
[    40.965] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    40.965] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    40.965] (**) Option "xkb_rules" "evdev"
[    40.965] (**) Option "xkb_model" "pc105"
[    40.965] (**) Option "xkb_layout" "fr"
[    40.965] (**) Option "xkb_variant" "latin9"
[    40.967] (II) XKB: generating xkmfile /tmp/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[    40.979] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    40.979] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    40.979] (II) Using input driver 'evdev' for 'Video Bus'
[    40.979] (**) Video Bus: always reports core events
[    40.979] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    40.979] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    40.979] (--) evdev: Video Bus: Found keys
[    40.979] (II) evdev: Video Bus: Configuring as keyboard
[    40.979] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7/event6"
[    40.979] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    40.979] (**) Option "xkb_rules" "evdev"
[    40.979] (**) Option "xkb_model" "pc105"
[    40.979] (**) Option "xkb_layout" "fr"
[    40.979] (**) Option "xkb_variant" "latin9"
[    40.979] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    40.979] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    40.979] (II) Using input driver 'evdev' for 'Video Bus'
[    40.979] (**) Video Bus: always reports core events
[    40.979] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    40.979] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    40.979] (--) evdev: Video Bus: Found keys
[    40.979] (II) evdev: Video Bus: Configuring as keyboard
[    40.979] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:00/input/input6/event5"
[    40.979] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    40.980] (**) Option "xkb_rules" "evdev"
[    40.980] (**) Option "xkb_model" "pc105"
[    40.980] (**) Option "xkb_layout" "fr"
[    40.980] (**) Option "xkb_variant" "latin9"
[    40.980] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    40.980] (II) No input driver specified, ignoring this device.
[    40.980] (II) This device may have been added with another device file.
[    40.980] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    40.980] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    40.980] (II) Using input driver 'evdev' for 'Sleep Button'
[    40.980] (**) Sleep Button: always reports core events
[    40.980] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    40.980] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    40.980] (--) evdev: Sleep Button: Found keys
[    40.980] (II) evdev: Sleep Button: Configuring as keyboard
[    40.980] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    40.980] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    40.980] (**) Option "xkb_rules" "evdev"
[    40.980] (**) Option "xkb_model" "pc105"
[    40.980] (**) Option "xkb_layout" "fr"
[    40.980] (**) Option "xkb_variant" "latin9"
[    40.980] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event8)
[    40.980] (II) No input driver specified, ignoring this device.
[    40.980] (II) This device may have been added with another device file.
[    40.981] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event11)
[    40.981] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[    40.981] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
[    40.981] (**) USB2.0 HD UVC WebCam: always reports core events
[    40.981] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event11"
[    40.981] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb40a
[    40.981] (--) evdev: USB2.0 HD UVC WebCam: Found keys
[    40.981] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
[    40.981] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input12/event11"
[    40.981] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
[    40.981] (**) Option "xkb_rules" "evdev"
[    40.981] (**) Option "xkb_model" "pc105"
[    40.981] (**) Option "xkb_layout" "fr"
[    40.981] (**) Option "xkb_variant" "latin9"
[    40.981] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    40.981] (II) No input driver specified, ignoring this device.
[    40.981] (II) This device may have been added with another device file.
[    40.981] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    40.981] (II) No input driver specified, ignoring this device.
[    40.981] (II) This device may have been added with another device file.
[    40.981] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[    40.981] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    40.981] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[    40.981] (**) Asus WMI hotkeys: always reports core events
[    40.981] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event7"
[    40.981] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[    40.981] (--) evdev: Asus WMI hotkeys: Found keys
[    40.981] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[    40.981] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input8/event7"
[    40.981] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[    40.981] (**) Option "xkb_rules" "evdev"
[    40.981] (**) Option "xkb_model" "pc105"
[    40.981] (**) Option "xkb_layout" "fr"
[    40.981] (**) Option "xkb_variant" "latin9"
[    40.982] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    40.982] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    40.982] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    40.982] (**) AT Translated Set 2 keyboard: always reports core events
[    40.982] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    40.982] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    40.982] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    40.982] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    40.982] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    40.982] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    40.982] (**) Option "xkb_rules" "evdev"
[    40.982] (**) Option "xkb_model" "pc105"
[    40.982] (**) Option "xkb_layout" "fr"
[    40.982] (**) Option "xkb_variant" "latin9"
[    40.982] (II) config/udev: Adding input device PS/2 Logitech Wheel Mouse (/dev/input/event4)
[    40.982] (**) PS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[    40.982] (II) Using input driver 'evdev' for 'PS/2 Logitech Wheel Mouse'
[    40.982] (**) PS/2 Logitech Wheel Mouse: always reports core events
[    40.982] (**) evdev: PS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
[    40.982] (--) evdev: PS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x1
[    40.982] (--) evdev: PS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[    40.982] (--) evdev: PS/2 Logitech Wheel Mouse: Found relative axes
[    40.982] (--) evdev: PS/2 Logitech Wheel Mouse: Found x and y relative axes
[    40.982] (II) evdev: PS/2 Logitech Wheel Mouse: Configuring as mouse
[    40.982] (**) evdev: PS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[    40.982] (**) evdev: PS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    40.982] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[    40.982] (II) XINPUT: Adding extended input device "PS/2 Logitech Wheel Mouse" (type: MOUSE, id 13)
[    40.982] (II) evdev: PS/2 Logitech Wheel Mouse: initialized for relative axes.
[    40.982] (**) PS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[    40.982] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[    40.982] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[    40.982] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[    40.982] (II) config/udev: Adding input device PS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[    40.982] (II) No input driver specified, ignoring this device.
[    40.982] (II) This device may have been added with another device file.
[    41.925] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    47.493] (II) evdev: PS/2 Logitech Wheel Mouse: Close
[    47.493] (II) UnloadModule: "evdev"
[    47.493] (II) evdev: AT Translated Set 2 keyboard: Close
[    47.493] (II) UnloadModule: "evdev"
[    47.493] (II) evdev: Asus WMI hotkeys: Close
[    47.493] (II) UnloadModule: "evdev"
[    47.493] (II) evdev: USB2.0 HD UVC WebCam: Close
[    47.493] (II) UnloadModule: "evdev"
[    47.493] (II) evdev: Sleep Button: Close
[    47.493] (II) UnloadModule: "evdev"
[    47.493] (II) evdev: Video Bus: Close
[    47.493] (II) UnloadModule: "evdev"
[    47.493] (II) evdev: Video Bus: Close
[    47.493] (II) UnloadModule: "evdev"
[    47.493] (II) evdev: Power Button: Close
[    47.493] (II) UnloadModule: "evdev"
[    48.091] (II) NOUVEAU(G0): NVLeaveVT is called.
[    49.169] (EE) Server terminated successfully (0). Closing log file.

Remarque supplémentaire : je ne sais pas si cela a un lien, mais avant que ce problème arrive j'avais déjà un autre problème moins grave : deux messages du type "une erreur est survenue lors du montage de /media/windows1" (ce-dernier étant ce qui me permet d'accéder à mes disques durs windows) apparaissent au démarrage d'Ubuntu, et j'ai alors deux choix (touches "s"=abandon, ou "m"=manuelle), j'appuie alors sur la touche "s" qui passe le montage et je ne peux donc accéder à mes fichiers windows depuis Ubuntu. J'ai vu que sur le lien suivant "https://forum.ubuntu-fr.org/viewtopic.php?id=1652081" la solution à ce problème était détaillée mais je ne m'en suis pas encore occupé car ce n'est pas mon problème principal aujourd'hui. Je pense que cela n'a rien à voir mais je voulais l'indiquer au cas-où.

Hors ligne

#4 Le 03/10/2015, à 23:53

el_Eldorado

Re : Problème passage mode graphique Ubuntu 14.04

Bonjour,

Je me permet d'intervenir sur ce fil sans avoir de réponse à apporter car je pense avoir le même problème, et donc avoir surement des informations complémentaires le concernant.
Je met ici le liens vers le sujet que j'ai posté sur le forum (aucune solution n'y ai donné pour l'instant).

Ainsi, je me retrouve comme Paul à ne pas réussir à me connecter via l'interface graphique, ni même à la lancer depuis la console.
Le problème est arrivé visiblement à peu près au même moment, mardi soir pour ma part.
Il me semble que cela vient d'une mise-à-jour que j'aie dû effectué via l'interface graphique originelle de mise-à-jour d'Ubuntu (je ne retrouve pas le nom, mais le logo est un un A dans un rond).

Je vais tâcher de me faire discret et de suivre les indications données ici.
Si bien entendu un modérateur trouve mon post déplacé, qu'il n'hésite pas à me le faire savoir et à le supprimer.

Un grand merci à ceux qui prendront du temps pour nous aider.

Xavier

Hors ligne

Pages : 1