#1 Le 31/10/2015, à 12:03
- DrFunk
Intel NUC5PPYH problème de stabilité HDMI 14.04 15.04 mais pas en vga
Bonjour à tous,
J'ai un petit problème agaçant, sous 14.04 mais tout autant sur 15.04 (sur 15.10, j'ai un autre pb plus grave que je documenterai plus tard).
Je boote, tout se passe bien. Ecran connecté en HDMI.
Mais dans des conditions difficiles à reproduire exactement, quand je bouge mon curseur souris violemment du bord gauche au bord droit et vice versa, l'écran sporadiquement se met à tremblé latéralement un instant (genre perte de Hsync) puis finit par un écran blanc ou pourpre.
Si je mets en veille et réveille, tout reviens comme avant.
Si je suis en VGA, le pb n’apparaît pas.
Etrange.
Xorg.0.log
[ 7.204]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 7.204] X Protocol Version 11, Revision 0
[ 7.204] Build Operating System: Linux 3.19.0-28-generic x86_64 Ubuntu
[ 7.204] Current Operating System: Linux nico-desktop 4.3.0-040300rc6-generic #201510182030 SMP Mon Oct 19 00:31:41 UTC 2015 x86_64
[ 7.204] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-040300rc6-generic root=UUID=8a5c9d08-67cb-470f-94e6-007bd64b6bc4 ro quiet splash vt.handoff=7
[ 7.204] Build Date: 11 September 2015 10:33:14AM
[ 7.204] xorg-server 2:1.17.1-0ubuntu3.1~trusty1 (For technical support please see http://www.ubuntu.com/support)
[ 7.204] Current version of pixman: 0.30.2
[ 7.204] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.204] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.205] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 30 09:08:57 2015
[ 7.206] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 7.208] (==) No Layout section. Using the first Screen section.
[ 7.208] (==) No screen section available. Using defaults.
[ 7.208] (**) |-->Screen "Default Screen Section" (0)
[ 7.208] (**) | |-->Monitor "<default monitor>"
[ 7.209] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.209] (==) Automatically adding devices
[ 7.209] (==) Automatically enabling devices
[ 7.209] (==) Automatically adding GPU devices
[ 7.209] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 7.209] Entry deleted from font path.
[ 7.209] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 7.209] Entry deleted from font path.
[ 7.209] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 7.209] Entry deleted from font path.
[ 7.210] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 7.210] Entry deleted from font path.
[ 7.210] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 7.210] Entry deleted from font path.
[ 7.210] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 7.210] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 7.210] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.210] (II) Loader magic: 0x559a25dc3c60
[ 7.210] (II) Module ABI versions:
[ 7.210] X.Org ANSI C Emulation: 0.4
[ 7.210] X.Org Video Driver: 19.0
[ 7.210] X.Org XInput driver : 21.0
[ 7.210] X.Org Server Extension : 9.0
[ 7.210] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7.213] (--) PCI:*(0:0:2:0) 8086:22b1:8086:2060 rev 33, Mem @ 0x80000000/16777216, 0x88000000/134217728, I/O @ 0x0000f000/64
[ 7.214] (II) LoadModule: "glx"
[ 7.216] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.229] (II) Module glx: vendor="X.Org Foundation"
[ 7.229] compiled for 1.17.1, module version = 1.0.0
[ 7.229] ABI class: X.Org Server Extension, version 9.0
[ 7.229] (==) AIGLX enabled
[ 7.229] (==) Matched intel as autoconfigured driver 0
[ 7.229] (==) Matched intel as autoconfigured driver 1
[ 7.229] (==) Matched modesetting as autoconfigured driver 2
[ 7.229] (==) Matched fbdev as autoconfigured driver 3
[ 7.229] (==) Matched vesa as autoconfigured driver 4
[ 7.229] (==) Assigned the driver to the xf86ConfigLayout
[ 7.229] (II) LoadModule: "intel"
[ 7.229] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 7.233] (II) Module intel: vendor="X.Org Foundation"
[ 7.233] compiled for 1.17.1, module version = 2.99.917
[ 7.233] Module class: X.Org Video Driver
[ 7.233] ABI class: X.Org Video Driver, version 19.0
[ 7.233] (II) LoadModule: "modesetting"
[ 7.234] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 7.235] (II) Module modesetting: vendor="X.Org Foundation"
[ 7.235] compiled for 1.17.1, module version = 1.17.1
[ 7.235] Module class: X.Org Video Driver
[ 7.235] ABI class: X.Org Video Driver, version 19.0
[ 7.235] (II) LoadModule: "fbdev"
[ 7.235] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 7.236] (II) Module fbdev: vendor="X.Org Foundation"
[ 7.236] compiled for 1.17.1, module version = 0.4.4
[ 7.236] Module class: X.Org Video Driver
[ 7.236] ABI class: X.Org Video Driver, version 19.0
[ 7.236] (II) LoadModule: "vesa"
[ 7.236] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7.236] (II) Module vesa: vendor="X.Org Foundation"
[ 7.237] compiled for 1.17.1, module version = 2.3.3
[ 7.237] Module class: X.Org Video Driver
[ 7.237] ABI class: X.Org Video Driver, version 19.0
[ 7.237] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 7.237] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 7.237] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 7.237] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 7.237] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 7.237] (II) FBDEV: driver for framebuffer: fbdev
[ 7.237] (II) VESA: driver for VESA chipsets: vesa
[ 7.237] (++) using VT number 7
[ 7.239] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150731
[ 7.239] (II) intel(0): SNA compiled: xserver-xorg-video-intel-lts-vivid 2:2.99.917-1~exp1ubuntu2.2~trusty1 (Timo Aaltonen <tjaalton@debian.org>)
[ 7.239] (II) intel(0): SNA compiled for use with valgrind
[ 7.240] (WW) Falling back to old probe method for modesetting
[ 7.240] (WW) Falling back to old probe method for fbdev
[ 7.240] (II) Loading sub module "fbdevhw"
[ 7.240] (II) LoadModule: "fbdevhw"
[ 7.240] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 7.241] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 7.241] compiled for 1.17.1, module version = 0.0.2
[ 7.241] ABI class: X.Org Video Driver, version 19.0
[ 7.241] (WW) Falling back to old probe method for vesa
[ 7.242] (--) intel(0): gen8 engineering sample
[ 7.242] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[ 7.242] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.242] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 7.242] (==) intel(0): RGB weight 888
[ 7.242] (==) intel(0): Default visual is TrueColor
[ 7.243] (II) intel(0): Output HDMI1 has no monitor section
[ 7.243] (II) intel(0): Enabled output HDMI1
[ 7.243] (II) intel(0): Output DP1 has no monitor section
[ 7.243] (II) intel(0): Enabled output DP1
[ 7.243] (II) intel(0): Output HDMI2 has no monitor section
[ 7.243] (II) intel(0): Enabled output HDMI2
[ 7.243] (II) intel(0): Output DP2 has no monitor section
[ 7.243] (II) intel(0): Enabled output DP2
[ 7.243] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 7.243] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 7.243] (II) intel(0): Enabled output VIRTUAL1
[ 7.243] (--) intel(0): Output DP1 using initial mode 1920x1080 on pipe 0
[ 7.244] (--) intel(0): Output HDMI2 using initial mode 1920x1080 on pipe 2
[ 7.244] (==) intel(0): TearFree disabled
[ 7.244] (==) intel(0): DPI set to (96, 96)
[ 7.244] (II) Loading sub module "dri2"
[ 7.244] (II) LoadModule: "dri2"
[ 7.244] (II) Module "dri2" already built-in
[ 7.244] (II) Loading sub module "present"
[ 7.244] (II) LoadModule: "present"
[ 7.244] (II) Module "present" already built-in
[ 7.244] (II) UnloadModule: "modesetting"
[ 7.244] (II) Unloading modesetting
[ 7.244] (II) UnloadModule: "fbdev"
[ 7.244] (II) Unloading fbdev
[ 7.244] (II) UnloadSubModule: "fbdevhw"
[ 7.244] (II) Unloading fbdevhw
[ 7.244] (II) UnloadModule: "vesa"
[ 7.244] (II) Unloading vesa
[ 7.244] (==) Depth 24 pixmap format is 32 bpp
[ 7.248] (II) intel(0): SNA initialized with Broadwell backend
[ 7.248] (==) intel(0): Backing store enabled
[ 7.248] (==) intel(0): Silken mouse enabled
[ 7.249] (II) intel(0): HW Cursor enabled
[ 7.249] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.250] (==) intel(0): DPMS enabled
[ 7.250] (==) intel(0): display hotplug detection enabled
[ 7.250] (II) intel(0): [DRI2] Setup complete
[ 7.250] (II) intel(0): [DRI2] DRI driver: i965
[ 7.250] (II) intel(0): [DRI2] VDPAU driver: i965
[ 7.250] (II) intel(0): direct rendering: DRI2 enabled
[ 7.250] (II) intel(0): hardware support for Present enabled
[ 7.250] (--) RandR disabled
[ 7.341] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7.341] (II) AIGLX: enabled GLX_ARB_create_context
[ 7.341] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7.341] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 7.341] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7.341] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7.341] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 7.341] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 7.341] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7.341] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 7.341] (II) AIGLX: Loaded and initialized i965
[ 7.341] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.351] (II) intel(0): switch to mode 1920x1080@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 7.369] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI2 using pipe 2, position (0, 0), rotation normal, reflection none
[ 7.381] (II) intel(0): Setting screen physical size to 508 x 285
[ 7.401] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 7.406] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 7.406] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.406] (II) LoadModule: "evdev"
[ 7.407] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.410] (II) Module evdev: vendor="X.Org Foundation"
[ 7.410] compiled for 1.17.1, module version = 2.9.0
[ 7.410] Module class: X.Org XInput Driver
[ 7.410] ABI class: X.Org XInput driver, version 21.0
[ 7.410] (II) Using input driver 'evdev' for 'Power Button'
[ 7.410] (**) Power Button: always reports core events
[ 7.410] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 7.410] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.410] (--) evdev: Power Button: Found keys
[ 7.410] (II) evdev: Power Button: Configuring as keyboard
[ 7.410] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 7.411] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 7.411] (**) Option "xkb_rules" "evdev"
[ 7.411] (**) Option "xkb_model" "pc105"
[ 7.411] (**) Option "xkb_layout" "fr"
[ 7.411] (**) Option "xkb_variant" "latin9"
[ 7.415] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[ 7.417] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 7.417] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.417] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.417] (**) Video Bus: always reports core events
[ 7.417] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 7.417] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.417] (--) evdev: Video Bus: Found keys
[ 7.417] (II) evdev: Video Bus: Configuring as keyboard
[ 7.417] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event8"
[ 7.417] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 7.417] (**) Option "xkb_rules" "evdev"
[ 7.417] (**) Option "xkb_model" "pc105"
[ 7.417] (**) Option "xkb_layout" "fr"
[ 7.417] (**) Option "xkb_variant" "latin9"
[ 7.418] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 7.418] (II) No input driver specified, ignoring this device.
[ 7.418] (II) This device may have been added with another device file.
[ 7.418] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 7.418] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 7.418] (II) Using input driver 'evdev' for 'Sleep Button'
[ 7.418] (**) Sleep Button: always reports core events
[ 7.418] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 7.419] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 7.419] (--) evdev: Sleep Button: Found keys
[ 7.419] (II) evdev: Sleep Button: Configuring as keyboard
[ 7.419] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 7.419] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 7.419] (**) Option "xkb_rules" "evdev"
[ 7.419] (**) Option "xkb_model" "pc105"
[ 7.419] (**) Option "xkb_layout" "fr"
[ 7.419] (**) Option "xkb_variant" "latin9"
[ 7.420] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event3)
[ 7.420] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 7.420] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 7.420] (**) Logitech USB Optical Mouse: always reports core events
[ 7.420] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event3"
[ 7.420] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 7.420] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 7.420] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 7.420] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 7.420] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 7.420] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 7.420] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 7.420] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 7.420] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.420] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C05A.0001/input/input6/event3"
[ 7.420] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[ 7.421] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 7.421] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 7.421] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 7.421] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 7.421] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 7.422] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 7.422] (II) No input driver specified, ignoring this device.
[ 7.422] (II) This device may have been added with another device file.
[ 7.422] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event4)
[ 7.422] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.422] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 7.422] (**) Logitech USB Keyboard: always reports core events
[ 7.422] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event4"
[ 7.422] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31d
[ 7.422] (--) evdev: Logitech USB Keyboard: Found keys
[ 7.422] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 7.422] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C31D.0002/input/input7/event4"
[ 7.422] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 7.422] (**) Option "xkb_rules" "evdev"
[ 7.423] (**) Option "xkb_model" "pc105"
[ 7.423] (**) Option "xkb_layout" "fr"
[ 7.423] (**) Option "xkb_variant" "latin9"
[ 7.423] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event5)
[ 7.424] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.424] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 7.424] (**) Logitech USB Keyboard: always reports core events
[ 7.424] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event5"
[ 7.424] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31d
[ 7.424] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 7.424] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 7.424] (--) evdev: Logitech USB Keyboard: Found keys
[ 7.424] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 7.424] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 7.424] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 7.424] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C31D.0003/input/input8/event5"
[ 7.424] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[ 7.424] (**) Option "xkb_rules" "evdev"
[ 7.424] (**) Option "xkb_model" "pc105"
[ 7.424] (**) Option "xkb_layout" "fr"
[ 7.424] (**) Option "xkb_variant" "latin9"
[ 7.424] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[ 7.425] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 7.425] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 7.425] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 7.425] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 7.425] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 7.425] (II) No input driver specified, ignoring this device.
[ 7.425] (II) This device may have been added with another device file.
[ 7.426] (II) config/udev: Adding input device HDA Intel PCH Headphone Front (/dev/input/event10)
[ 7.426] (II) No input driver specified, ignoring this device.
[ 7.426] (II) This device may have been added with another device file.
[ 7.426] (II) config/udev: Adding input device HDA Intel PCH Front Headphone Surround (/dev/input/event11)
[ 7.426] (II) No input driver specified, ignoring this device.
[ 7.426] (II) This device may have been added with another device file.
[ 7.426] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 7.427] (II) No input driver specified, ignoring this device.
[ 7.427] (II) This device may have been added with another device file.
[ 7.430] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (ite-cir) (/dev/input/event7)
[ 7.430] (**) MCE IR Keyboard/Mouse (ite-cir): Applying InputClass "evdev pointer catchall"
[ 7.430] (**) MCE IR Keyboard/Mouse (ite-cir): Applying InputClass "evdev keyboard catchall"
[ 7.430] (II) Using input driver 'evdev' for 'MCE IR Keyboard/Mouse (ite-cir)'
[ 7.430] (**) MCE IR Keyboard/Mouse (ite-cir): always reports core events
[ 7.430] (**) evdev: MCE IR Keyboard/Mouse (ite-cir): Device: "/dev/input/event7"
[ 7.430] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Vendor 0 Product 0
[ 7.430] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Found 3 mouse buttons
[ 7.430] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Found relative axes
[ 7.430] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Found x and y relative axes
[ 7.430] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Found keys
[ 7.430] (II) evdev: MCE IR Keyboard/Mouse (ite-cir): Configuring as mouse
[ 7.430] (II) evdev: MCE IR Keyboard/Mouse (ite-cir): Configuring as keyboard
[ 7.430] (**) evdev: MCE IR Keyboard/Mouse (ite-cir): YAxisMapping: buttons 4 and 5
[ 7.430] (**) evdev: MCE IR Keyboard/Mouse (ite-cir): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.430] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event7"
[ 7.430] (II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (ite-cir)" (type: KEYBOARD, id 12)
[ 7.430] (**) Option "xkb_rules" "evdev"
[ 7.430] (**) Option "xkb_model" "pc105"
[ 7.430] (**) Option "xkb_layout" "fr"
[ 7.431] (**) Option "xkb_variant" "latin9"
[ 7.431] (II) evdev: MCE IR Keyboard/Mouse (ite-cir): initialized for relative axes.
[ 7.431] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) keeping acceleration scheme 1
[ 7.431] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) acceleration profile 0
[ 7.431] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) acceleration factor: 2.000
[ 7.431] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) acceleration threshold: 4
[ 7.432] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (ite-cir) (/dev/input/mouse1)
[ 7.432] (II) No input driver specified, ignoring this device.
[ 7.432] (II) This device may have been added with another device file.
[ 7.432] (II) config/udev: Adding input device ITE8713 CIR transceiver (/dev/input/event6)
[ 7.432] (**) ITE8713 CIR transceiver: Applying InputClass "evdev keyboard catchall"
[ 7.432] (II) Using input driver 'evdev' for 'ITE8713 CIR transceiver'
[ 7.432] (**) ITE8713 CIR transceiver: always reports core events
[ 7.432] (**) evdev: ITE8713 CIR transceiver: Device: "/dev/input/event6"
[ 7.433] (--) evdev: ITE8713 CIR transceiver: Vendor 0x1283 Product 0
[ 7.433] (--) evdev: ITE8713 CIR transceiver: Found keys
[ 7.433] (II) evdev: ITE8713 CIR transceiver: Configuring as keyboard
[ 7.433] (**) Option "config_info" "udev:/sys/devices/virtual/rc/rc0/input9/event6"
[ 7.433] (II) XINPUT: Adding extended input device "ITE8713 CIR transceiver" (type: KEYBOARD, id 13)
[ 7.433] (**) Option "xkb_rules" "evdev"
[ 7.433] (**) Option "xkb_model" "pc105"
[ 7.433] (**) Option "xkb_layout" "fr"
[ 7.433] (**) Option "xkb_variant" "latin9"
[ 9.367] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 10.006] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[ 10.067] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[ 12.206] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BB3DE285E70FB9185F4D20DA8259C6A5B347C21.xkmlshw
nico-desktop
description: Ordinateur de Bureau
produit: ()
bits: 64 bits
fonctionnalités: smbios-2.8 dmi-2.8 vsyscall32
configuration: boot=normal chassis=desktop uuid=8080D9C0-DF72-E311-BC68-B8AEED77D6AB
*-core
description: Carte mère
produit: NUC5PPYB
fabriquant: Intel Corporation
identifiant matériel: 0
version: H76558-102
numéro de série: GEPY52700HQE
emplacement: To be filled by O.E.M.
*-firmware
description: BIOS
fabriquant: Intel Corp.
identifiant matériel: 0
version: PYBSWCEL.86A.0044.2015.0925.1143
date: 09/25/2015
taille: 64KiB
capacité: 6592KiB
fonctionnalités: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
*-memory
description: Mémoire Système
identifiant matériel: 24
emplacement: Carte mère
taille: 8GiB
*-bank
description: SODIMM DDR3 1600 MHz (0,6 ns)
produit: BLS8G3N169ES4.16FE
fabriquant: Undefined
identifiant matériel: 0
numéro de série: A9105834
emplacement: SODIMM 0
taille: 8GiB
bits: 64 bits
horloge: 1600MHz (0.6ns)
*-cache:0
description: L1 cache
identifiant matériel: 2f
emplacement: CPU Internal L1
taille: 224KiB
capacité: 224KiB
fonctionnalités: internal write-back
*-cache:1
description: L2 cache
identifiant matériel: 30
emplacement: CPU Internal L2
taille: 2MiB
capacité: 2MiB
fonctionnalités: internal write-back unified
*-cpu
description: CPU
produit: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz
fabriquant: Intel Corp.
identifiant matériel: 31
information bus: cpu@0
version: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz
emplacement: SOCKET 0
taille: 1740MHz
capacité: 1740MHz
bits: 64 bits
horloge: 80MHz
fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms cpufreq
configuration: cores=4 enabledcores=4 threads=4
*-pci
description: Host bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 21
bits: 32 bits
horloge: 33MHz
configuration: driver=iosf_mbi_pci
ressources: irq:0
*-display
description: VGA compatible controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
ressources: irq:314 mémoire:80000000-80ffffff mémoire:88000000-8fffffff portE/S:f000(taille=64)
*-storage
description: SATA controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 13
information bus: pci@0000:00:13.0
version: 21
bits: 32 bits
horloge: 66MHz
fonctionnalités: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
ressources: irq:116 portE/S:f060(taille=32) mémoire:81427000-814277ff
*-usb
description: USB controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 14
information bus: pci@0000:00:14.0
version: 21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
ressources: irq:115 mémoire:81400000-8140ffff
*-generic
description: Encryption controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1a
information bus: pci@0000:00:1a.0
version: 21
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=mei_txe latency=0
ressources: irq:312 mémoire:81100000-811fffff mémoire:81000000-810fffff
*-multimedia
description: Audio device
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1b
information bus: pci@0000:00:1b.0
version: 21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:315 mémoire:81414000-81417fff
*-pci:0
description: PCI bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: 21
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:0 portE/S:1000(taille=4096) mémoire:81500000-816fffff portE/S:81700000(taille=2097152)
*-pci:1
description: PCI bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1c.1
information bus: pci@0000:00:1c.1
version: 21
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:17 mémoire:81300000-813fffff
*-network
description: Interface réseau sans fil
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: wlan2
version: 81
numéro de série: 34:02:86:c4:60:21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=4.3.0-040300rc6-generic firmware=25.30.14.0 ip=192.168.0.13 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
ressources: irq:313 mémoire:81300000-81301fff
*-pci:2
description: PCI bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1c.2
information bus: pci@0000:00:1c.2
version: 21
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:18 portE/S:e000(taille=4096) mémoire:81200000-812fffff
*-network
description: Ethernet interface
produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:03:00.0
nom logique: eth0
version: 15
numéro de série: b8:ae:ed:77:d6:ab
taille: 10Mbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168h-2_0.0.2 02/26/15 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
ressources: irq:117 portE/S:e000(taille=256) mémoire:81204000-81204fff mémoire:81200000-81203fff
*-isa
description: ISA bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 21
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
ressources: irq:0
*-serial NON-RÉCLAMÉ
description: SMBus
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1f.3
information bus: pci@0000:00:1f.3
version: 21
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm cap_list
configuration: latency=0
ressources: mémoire:8141c000-8141c01f portE/S:f040(taille=32)
*-scsi
identifiant matériel: 1
nom logique: scsi0
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: CT250BX100SSD1
identifiant matériel: 0.0.0
information bus: scsi@0:0.0.0
nom logique: /dev/sda
version: MU02
numéro de série: 1537F00C4D20
taille: 232GiB (250GB)
fonctionnalités: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=06fc8060-bc93-4729-aca3-6e74f9279dc4 sectorsize=512
*-volume:0
description: Windows FAT volume
fabriquant: mkfs.fat
identifiant matériel: 1
information bus: scsi@0:0.0.0,1
nom logique: /dev/sda1
nom logique: /boot/efi
version: FAT32
numéro de série: 19a7-e08d
taille: 510MiB
capacité: 511MiB
fonctionnalités: boot fat initialized
configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted
*-volume:1
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 2
information bus: scsi@0:0.0.0,2
nom logique: /dev/sda2
nom logique: /
version: 1.0
numéro de série: 8a5c9d08-67cb-470f-94e6-007bd64b6bc4
taille: 29GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2015-10-15 23:12:20 filesystem=ext4 lastmountpoint=/ modified=2015-10-30 09:08:53 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2015-10-30 09:08:53 state=mounted
*-volume:2
description: Linux swap volume
fabriquant: Linux
identifiant matériel: 3
information bus: scsi@0:0.0.0,3
nom logique: /dev/sda3
version: 1
numéro de série: d0323324-3ca7-4884-9b14-14a6758a2770
taille: 8110MiB
capacité: 8111MiB
fonctionnalités: nofs swap initialized
configuration: filesystem=swap pagesize=4095
*-volume:3
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 4
information bus: scsi@0:0.0.0,4
nom logique: /dev/sda4
version: 1.0
numéro de série: a76a0723-df20-4f67-9eff-2a2a915c0664
taille: 29GiB
capacité: 29GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2015-10-25 12:34:16 filesystem=ext4 lastmountpoint=/ modified=2015-10-27 12:33:32 mounted=2015-10-27 12:33:32 state=clean
*-volume:4
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 5
information bus: scsi@0:0.0.0,5
nom logique: /dev/sda5
nom logique: /media/data
version: 1.0
numéro de série: cc13c72b-4688-41a8-bbb9-9647e5f73c5d
taille: 164GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2015-10-15 22:15:35 filesystem=ext4 lastmountpoint=/media/data modified=2015-10-30 09:08:53 mount.fstype=ext4 mount.options=rw,relatime,data=ordered mounted=2015-10-30 09:08:53 state=mountedEt au cas où /var/log/dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.3.0-040300rc6-generic (kernel@gomeisa) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ) #201510182030 SMP Mon Oct 19 00:31:41 UTC 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-040300rc6-generic root=UUID=8a5c9d08-67cb-470f-94e6-007bd64b6bc4 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007b07dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b07e000-0x000000007b0fdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b0fe000-0x000000007b10efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007b10f000-0x000000007b670fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007b671000-0x000000007b929fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b92a000-0x000000007b985fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007b986000-0x000000007bb85fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bb86000-0x000000007bff5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007bff6000-0x000000007bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x7b101000 ACPI 2.0=0x7b101000 SMBIOS=0xf05b0 MPS=0xfd650
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: /NUC5PPYB, BIOS PYBSWCEL.86A.0044.2015.0925.1143 09/25/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07C800000 mask FFF800000 uncachable
[ 0.000000] 2 base 07D000000 mask FFF000000 uncachable
[ 0.000000] 3 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask F80000000 write-back
[ 0.000000] 6 base 088000000 mask FF8000000 write-through
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd860-0x000fd86f] mapped at [ffff8800000fd860]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02ff9000, 0x02ff9fff] PGTABLE
[ 0.000000] BRK [0x02ffa000, 0x02ffafff] PGTABLE
[ 0.000000] BRK [0x02ffb000, 0x02ffbfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x27fe00000-0x27fffffff]
[ 0.000000] [mem 0x27fe00000-0x27fffffff] page 2M
[ 0.000000] BRK [0x02ffc000, 0x02ffcfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x260000000-0x27fdfffff]
[ 0.000000] [mem 0x260000000-0x27fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0x7b07dfff]
[ 0.000000] [mem 0x40200000-0x7affffff] page 2M
[ 0.000000] [mem 0x7b000000-0x7b07dfff] page 4k
[ 0.000000] BRK [0x02ffd000, 0x02ffdfff] PGTABLE
[ 0.000000] BRK [0x02ffe000, 0x02ffefff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7b986000-0x7bb85fff]
[ 0.000000] [mem 0x7b986000-0x7bb85fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7bff6000-0x7bffffff]
[ 0.000000] [mem 0x7bff6000-0x7bffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x25fffffff]
[ 0.000000] [mem 0x100000000-0x25fffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x35c6a000-0x36e2cfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007B101000 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x000000007B101090 00009C (v01 INTEL NUC5PPYB 0000002C AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007B10C380 00010C (v05 INTEL NUC5PPYB 0000002C AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150818/tbfadt-623)
[ 0.000000] ACPI: DSDT 0x000000007B1011B8 00B1C2 (v02 INTEL NUC5PPYB 0000002C INTL 20120913)
[ 0.000000] ACPI: FACS 0x000000007B670E80 000040
[ 0.000000] ACPI: APIC 0x000000007B10C490 000084 (v03 INTEL NUC5PPYB 0000002C AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007B10C518 000044 (v01 INTEL NUC5PPYB 0000002C AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000007B10C560 00009C (v01 INTEL NUC5PPYB 0000002C AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007B10C600 00003C (v01 INTEL NUC5PPYB 0000002C MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000007B10C640 000763 (v01 INTEL NUC5PPYB 0000002C INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000007B10CDA8 000290 (v01 INTEL NUC5PPYB 0000002C INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000007B10D038 00017A (v01 INTEL NUC5PPYB 0000002C INTL 20061109)
[ 0.000000] ACPI: UEFI 0x000000007B10D1B8 000042 (v01 INTEL NUC5PPYB 0000002C 00000000)
[ 0.000000] ACPI: SSDT 0x000000007B10D200 000427 (v01 INTEL NUC5PPYB 0000002C INTL 20061109)
[ 0.000000] ACPI: TPM2 0x000000007B10D628 000034 (v03 INTEL NUC5PPYB 0000002C 00000000)
[ 0.000000] ACPI: LPIT 0x000000007B10D660 000104 (v01 INTEL NUC5PPYB 0000002C MSFT 0100000D)
[ 0.000000] ACPI: BGRT 0x000000007B10D768 000038 (v01 INTEL NUC5PPYB 0000002C AMI 00010013)
[ 0.000000] ACPI: CSRT 0x000000007B10D7A0 00014C (v00 INTEL NUC5PPYB 0000002C MSFT 0100000D)
[ 0.000000] ACPI: SSDT 0x000000007B10D8F0 0016AC (v01 INTEL NUC5PPYB 0000002C INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x27fff3000-0x27fff7fff]
[ 0.000000] [ffffea0000000000-ffffea0009ffffff] PMD -> [ffff880277600000-ffff88027f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000003efff]
[ 0.000000] node 0: [mem 0x0000000000040000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x000000007b07dfff]
[ 0.000000] node 0: [mem 0x000000007b986000-0x000000007bb85fff]
[ 0.000000] node 0: [mem 0x000000007bff6000-0x000000007bffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[ 0.000000] On node 0 totalpages: 2076710
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7811 pages used for memmap
[ 0.000000] DMA32 zone: 499848 pages, LIFO batch:31
[ 0.000000] Normal zone: 24576 pages used for memmap
[ 0.000000] Normal zone: 1572864 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x7ce00000-0x7edfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b07e000-0x7b0fdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b0fe000-0x7b10efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b10f000-0x7b670fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b671000-0x7b929fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b92a000-0x7b985fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bb86000-0x7bff5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7cdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ce00000-0x7edfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ee00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed05fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed06000-0xfed06fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed07000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.000000] e820: [mem 0x7ee00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88027fc00000 s97240 r8192 d29736 u524288
[ 0.000000] pcpu-alloc: s97240 r8192 d29736 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2044233
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-040300rc6-generic root=UUID=8a5c9d08-67cb-470f-94e6-007bd64b6bc4 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8003992K/8306840K available (7907K kernel code, 1265K rwdata, 3896K rodata, 1460K init, 1300K bss, 302848K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] tsc: Detected 1599.954 MHz processor
[ 0.000047] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.90 BogoMIPS (lpj=6399816)
[ 0.000054] pid_max: default: 32768 minimum: 301
[ 0.000068] ACPI: Core revision 20150818
[ 0.024474] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.026477] Security Framework initialized
[ 0.026484] Yama: becoming mindful.
[ 0.026501] AppArmor: AppArmor initialized
[ 0.027653] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.032227] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.034307] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.034332] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.034829] Initializing cgroup subsys io
[ 0.034845] Initializing cgroup subsys memory
[ 0.034864] Initializing cgroup subsys devices
[ 0.034871] Initializing cgroup subsys freezer
[ 0.034877] Initializing cgroup subsys net_cls
[ 0.034883] Initializing cgroup subsys perf_event
[ 0.034889] Initializing cgroup subsys net_prio
[ 0.034894] Initializing cgroup subsys hugetlb
[ 0.034906] Initializing cgroup subsys pids
[ 0.034941] CPU: Physical Processor ID: 0
[ 0.034944] CPU: Processor Core ID: 0
[ 0.034951] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.034954] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.040397] mce: CPU supports 6 MCE banks
[ 0.040411] CPU0: Thermal monitoring handled by SMI
[ 0.040416] process: using mwait in idle threads
[ 0.040423] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.040426] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[ 0.040871] Freeing SMP alternatives memory: 28K (ffffffff81eab000 - ffffffff81eb2000)
[ 0.050517] ftrace: allocating 31194 entries in 122 pages
[ 0.073765] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.113484] TSC deadline timer enabled
[ 0.113491] smpboot: CPU0: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
[ 0.113540] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.113558] ... version: 3
[ 0.113561] ... bit width: 40
[ 0.113563] ... generic registers: 2
[ 0.113566] ... value mask: 000000ffffffffff
[ 0.113568] ... max period: 000000ffffffffff
[ 0.113571] ... fixed-purpose events: 3
[ 0.113573] ... event mask: 0000000700000003
[ 0.115363] x86: Booting SMP configuration:
[ 0.115369] .... node #0, CPUs: #1
[ 0.120890] CPU1: Thermal monitoring handled by SMI
[ 0.123162] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.123426] #2
[ 0.128913] CPU2: Thermal monitoring handled by SMI
[ 0.131207] #3<7>[ 0.136701] CPU3: Thermal monitoring handled by SMI
[ 0.138786] x86: Booted up 1 node, 4 CPUs
[ 0.138794] smpboot: Total of 4 processors activated (12799.63 BogoMIPS)
[ 0.139856] devtmpfs: initialized
[ 0.150021] evm: security.selinux
[ 0.150026] evm: security.SMACK64
[ 0.150028] evm: security.SMACK64EXEC
[ 0.150030] evm: security.SMACK64TRANSMUTE
[ 0.150033] evm: security.SMACK64MMAP
[ 0.150035] evm: security.ima
[ 0.150037] evm: security.capability
[ 0.150204] PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes)
[ 0.150209] PM: Registering ACPI NVS region [mem 0x7b10f000-0x7b670fff] (5644288 bytes)
[ 0.150582] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.150787] pinctrl core: initialized pinctrl subsystem
[ 0.151044] RTC time: 8:08:50, date: 10/30/15
[ 0.151373] NET: Registered protocol family 16
[ 0.167472] cpuidle: using governor ladder
[ 0.179487] cpuidle: using governor menu
[ 0.179496] PCCT header not found.
[ 0.179671] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.179675] ACPI: bus type PCI registered
[ 0.179680] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.179848] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.179854] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.179892] PCI: Using configuration type 1 for base access
[ 0.192483] ACPI: Added _OSI(Module Device)
[ 0.192489] ACPI: Added _OSI(Processor Device)
[ 0.192492] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.192495] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.209014] ACPI: Dynamic OEM Table Load:
[ 0.209032] ACPI: SSDT 0xFFFF880275DAA000 000697 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.210388] ACPI: Dynamic OEM Table Load:
[ 0.210400] ACPI: SSDT 0xFFFF880275DDDC00 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.212201] ACPI: Dynamic OEM Table Load:
[ 0.212213] ACPI: SSDT 0xFFFF880275DF5200 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.213504] ACPI: Dynamic OEM Table Load:
[ 0.213515] ACPI: SSDT 0xFFFF8802770A5000 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.216391] ACPI: Interpreter enabled
[ 0.216406] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580)
[ 0.216418] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
[ 0.216453] ACPI: (supports S0 S3 S4 S5)
[ 0.216457] ACPI: Using IOAPIC for interrupt routing
[ 0.216539] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.219296] ACPI: Power Resource [ID3C] (off)
[ 0.224493] ACPI: Power Resource [USBC] (on)
[ 0.232740] ACPI: Power Resource [CLK0] (off)
[ 0.233309] ACPI: Power Resource [CLK0] (off)
[ 0.233422] ACPI: Power Resource [CLK1] (off)
[ 0.240798] ACPI: Power Resource [FN00] (off)
[ 0.242029] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.242043] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.242140] \_SB_.PCI0:_OSC invalid UUID
[ 0.242143] _OSC request data:1 1f 0
[ 0.242153] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.243056] PCI host bridge to bus 0000:00
[ 0.243063] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.243069] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.243074] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.243078] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.243083] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.243087] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.243092] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.243096] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.243101] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.243118] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[ 0.243460] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[ 0.243498] pci 0000:00:02.0: reg 0x10: [mem 0x80000000-0x80ffffff 64bit]
[ 0.243514] pci 0000:00:02.0: reg 0x18: [mem 0x88000000-0x8fffffff 64bit pref]
[ 0.243527] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.243832] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[ 0.243912] pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.243927] pci 0000:00:13.0: reg 0x24: [mem 0x81427000-0x814277ff]
[ 0.243975] pci 0000:00:13.0: PME# supported from D3hot
[ 0.244219] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[ 0.244269] pci 0000:00:14.0: reg 0x10: [mem 0x81400000-0x8140ffff 64bit]
[ 0.244355] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.244535] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.244640] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[ 0.244681] pci 0000:00:1a.0: reg 0x10: [mem 0x81100000-0x811fffff]
[ 0.244696] pci 0000:00:1a.0: reg 0x14: [mem 0x81000000-0x810fffff]
[ 0.244777] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.245068] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[ 0.245121] pci 0000:00:1b.0: reg 0x10: [mem 0x81414000-0x81417fff 64bit]
[ 0.245216] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.245375] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.245476] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[ 0.245582] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.245734] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.245833] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[ 0.245942] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.246100] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.246202] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[ 0.246311] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.246465] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.246575] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[ 0.246931] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[ 0.247012] pci 0000:00:1f.3: reg 0x10: [mem 0x8141c000-0x8141c01f]
[ 0.247132] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.247568] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.248363] pci 0000:02:00.0: [8086:3165] type 00 class 0x028000
[ 0.249650] pci 0000:02:00.0: reg 0x10: [mem 0x81300000-0x81301fff 64bit]
[ 0.252245] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.252794] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.260028] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.260040] pci 0000:00:1c.1: bridge window [mem 0x81300000-0x813fffff]
[ 0.260197] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.260259] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.260299] pci 0000:03:00.0: reg 0x18: [mem 0x81204000-0x81204fff 64bit]
[ 0.260325] pci 0000:03:00.0: reg 0x20: [mem 0x81200000-0x81203fff 64bit]
[ 0.260427] pci 0000:03:00.0: supports D1 D2
[ 0.260432] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.260513] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.267682] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.267691] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.267698] pci 0000:00:1c.2: bridge window [mem 0x81200000-0x812fffff]
[ 1.275924] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.276083] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.276236] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.276389] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.276558] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 1.276709] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.276862] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.277012] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.278592] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 1.279044] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 1.279050] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.279056] vgaarb: loaded
[ 1.279060] vgaarb: bridge control possible 0000:00:02.0
[ 1.279677] SCSI subsystem initialized
[ 1.279788] libata version 3.00 loaded.
[ 1.279864] ACPI: bus type USB registered
[ 1.279913] usbcore: registered new interface driver usbfs
[ 1.279942] usbcore: registered new interface driver hub
[ 1.279987] usbcore: registered new device driver usb
[ 1.280567] PCI: Using ACPI for IRQ routing
[ 1.291590] PCI: pci_cache_line_size set to 64 bytes
[ 1.291988] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
[ 1.291992] e820: reserve RAM buffer [mem 0x7b07e000-0x7bffffff]
[ 1.291996] e820: reserve RAM buffer [mem 0x7bb86000-0x7bffffff]
[ 1.292264] NetLabel: Initializing
[ 1.292269] NetLabel: domain hash size = 128
[ 1.292271] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.292296] NetLabel: unlabeled traffic allowed by default
[ 1.292532] clocksource: Switched to clocksource refined-jiffies
[ 1.306130] AppArmor: AppArmor Filesystem Enabled
[ 1.306302] pnp: PnP ACPI init
[ 1.306673] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.306680] system 00:00: [io 0x0400-0x047f] has been reserved
[ 1.306685] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 1.306695] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.307014] system 00:01: [io 0x0a00-0x0a2f] has been reserved
[ 1.307021] system 00:01: [io 0x0a30-0x0a3f] has been reserved
[ 1.307026] system 00:01: [io 0x0a40-0x0a4f] has been reserved
[ 1.307033] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.307721] pnp 00:02: [dma 0 disabled]
[ 1.307809] pnp 00:02: Plug and Play ACPI device, IDs ITE8713 (active)
[ 1.310702] system 00:03: [mem 0x81428000-0x81428fff] has been reserved
[ 1.310709] system 00:03: [mem 0x81421000-0x81421fff] has been reserved
[ 1.310714] system 00:03: [mem 0x8141f000-0x8141ffff] has been reserved
[ 1.310719] system 00:03: [mem 0x8141d000-0x8141dfff] has been reserved
[ 1.310724] system 00:03: [mem 0x81426000-0x81426fff] has been reserved
[ 1.310729] system 00:03: [mem 0x81424000-0x81424fff] has been reserved
[ 1.310734] system 00:03: [mem 0x81422000-0x81422fff] has been reserved
[ 1.310743] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.310857] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.310863] system 00:04: [mem 0xfea00000-0xfeafffff] has been reserved
[ 1.310868] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved
[ 1.310873] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved
[ 1.310878] system 00:04: [mem 0xfed06000-0xfed06fff] has been reserved
[ 1.310883] system 00:04: [mem 0xfed08000-0xfed09fff] has been reserved
[ 1.310888] system 00:04: [mem 0xfed80000-0xfedbffff] could not be reserved
[ 1.310893] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 1.310898] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.310906] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.311607] pnp: PnP ACPI: found 5 devices
[ 1.321048] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.321086] clocksource: Switched to clocksource acpi_pm
[ 1.321126] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 1.321135] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 1.321141] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 1.321173] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 1.321178] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 1.321184] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.321189] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.321194] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 1.321199] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 1.321213] pci 0000:00:1c.0: BAR 14: assigned [mem 0x81500000-0x816fffff]
[ 1.321227] pci 0000:00:1c.0: BAR 15: assigned [mem 0x81700000-0x818fffff 64bit pref]
[ 1.321234] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.321242] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.321248] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.321257] pci 0000:00:1c.0: bridge window [mem 0x81500000-0x816fffff]
[ 1.321265] pci 0000:00:1c.0: bridge window [mem 0x81700000-0x818fffff 64bit pref]
[ 1.321276] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.321285] pci 0000:00:1c.1: bridge window [mem 0x81300000-0x813fffff]
[ 1.321298] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 1.321304] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 1.321312] pci 0000:00:1c.2: bridge window [mem 0x81200000-0x812fffff]
[ 1.321327] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 1.321332] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 1.321336] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 1.321340] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 1.321345] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 1.321349] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 1.321354] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 1.321358] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[ 1.321363] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.321368] pci_bus 0000:01: resource 1 [mem 0x81500000-0x816fffff]
[ 1.321372] pci_bus 0000:01: resource 2 [mem 0x81700000-0x818fffff 64bit pref]
[ 1.321377] pci_bus 0000:02: resource 1 [mem 0x81300000-0x813fffff]
[ 1.321383] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 1.321387] pci_bus 0000:03: resource 1 [mem 0x81200000-0x812fffff]
[ 1.321465] NET: Registered protocol family 2
[ 1.321874] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.322230] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.322623] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.322731] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.322833] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.323037] NET: Registered protocol family 1
[ 1.323076] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.323343] PCI: CLS 64 bytes, default 64
[ 1.323477] Trying to unpack rootfs image as initramfs...
[ 1.950235] Freeing initrd memory: 18188K (ffff880035c6a000 - ffff880036e2d000)
[ 1.950337] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.950345] software IO TLB [mem 0x72b1d000-0x76b1d000] (64MB) mapped at [ffff880072b1d000-ffff880076b1cfff]
[ 1.950598] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.950765] microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x353
[ 1.950778] microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x353
[ 1.950801] microcode: CPU2 sig=0x406c3, pf=0x1, revision=0x353
[ 1.950826] microcode: CPU3 sig=0x406c3, pf=0x1, revision=0x353
[ 1.950957] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.951056] Scanning for low memory corruption every 60 seconds
[ 1.951829] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.951892] audit: initializing netlink subsys (disabled)
[ 1.951931] audit: type=2000 audit(1446192531.947:1): initialized
[ 1.952487] Initialise system trusted keyring
[ 1.952678] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.956811] zbud: loaded
[ 1.957356] VFS: Disk quotas dquot_6.6.0
[ 1.957445] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.958755] fuse init (API version 7.23)
[ 1.959127] Key type big_key registered
[ 1.960590] Key type asymmetric registered
[ 1.960598] Asymmetric key parser 'x509' registered
[ 1.960636] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.960758] io scheduler noop registered
[ 1.960764] io scheduler deadline registered (default)
[ 1.960853] io scheduler cfq registered
[ 1.961743] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.961761] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.961849] efifb: probing for efifb
[ 1.961883] efifb: framebuffer at 0x88000000, mapped to 0xffffc90001000000, using 5120k, total 5120k
[ 1.961887] efifb: mode is 1280x1024x32, linelength=5120, pages=1
[ 1.961889] efifb: scrolling: redraw
[ 1.961893] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.972823] Console: switching to colour frame buffer device 160x64
[ 1.983556] fb0: EFI VGA frame buffer device
[ 1.983583] intel_idle: MWAIT substates: 0x33000020
[ 1.983587] intel_idle: v0.4 model 0x4C
[ 1.983590] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.984175] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.984214] ACPI: Lid Switch [LID0]
[ 1.984317] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.984326] ACPI: Sleep Button [SLPB]
[ 1.984425] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.984431] ACPI: Power Button [PWRF]
[ 1.989869] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.989875] ACPI: Thermal Zone [TZ01] (32 C)
[ 1.989979] GHES: HEST is not enabled!
[ 1.990753] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.005167] Linux agpgart interface v0.103
[ 2.021050] brd: module loaded
[ 2.032090] loop: module loaded
[ 2.033021] libphy: Fixed MDIO Bus: probed
[ 2.033030] tun: Universal TUN/TAP device driver, 1.6
[ 2.033033] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.034018] PPP generic driver version 2.4.2
[ 2.034638] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.034653] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.034851] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 2.034867] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.035196] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.035202] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.035207] usb usb1: Product: xHCI Host Controller
[ 2.035211] usb usb1: Manufacturer: Linux 4.3.0-040300rc6-generic xhci-hcd
[ 2.035215] usb usb1: SerialNumber: 0000:00:14.0
[ 2.035663] hub 1-0:1.0: USB hub found
[ 2.035695] hub 1-0:1.0: 7 ports detected
[ 2.037006] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.037016] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.037181] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.037187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.037192] usb usb2: Product: xHCI Host Controller
[ 2.037196] usb usb2: Manufacturer: Linux 4.3.0-040300rc6-generic xhci-hcd
[ 2.037200] usb usb2: SerialNumber: 0000:00:14.0
[ 2.038220] hub 2-0:1.0: USB hub found
[ 2.038252] hub 2-0:1.0: 6 ports detected
[ 2.039539] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.039560] ehci-pci: EHCI PCI platform driver
[ 2.039593] ehci-platform: EHCI generic platform driver
[ 2.039635] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.039648] ohci-pci: OHCI PCI platform driver
[ 2.039674] ohci-platform: OHCI generic platform driver
[ 2.039702] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.039813] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.040654] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.040666] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.041451] mousedev: PS/2 mouse device common for all mice
[ 2.043764] rtc_cmos rtc_cmos: RTC can wake from S4
[ 2.044129] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.044181] rtc_cmos rtc_cmos: alarms up to one day, y3k, 114 bytes nvram
[ 2.044206] i2c /dev entries driver
[ 2.044359] device-mapper: uevent: version 1.0.3
[ 2.044578] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[ 2.044605] Intel P-state driver initializing.
[ 2.045302] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.045328] EFI Variables Facility v0.08 2004-May-17
[ 2.059997] NET: Registered protocol family 10
[ 2.060673] NET: Registered protocol family 17
[ 2.060697] Key type dns_resolver registered
[ 2.063758] registered taskstats version 1
[ 2.063798] Loading compiled-in X.509 certificates
[ 2.066104] Loaded X.509 cert 'Build time autogenerated kernel key: ee6f1b58c258122621b3e3ea8f24f662e3b0b752'
[ 2.066149] zswap: loaded using pool lzo/zbud
[ 2.072128] Key type trusted registered
[ 2.084841] Key type encrypted registered
[ 2.084864] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.084872] ima: No TPM chip found, activating TPM-bypass!
[ 2.084930] evm: HMAC attrs: 0x1
[ 2.087084] Magic number: 3:192:120
[ 2.087101] misc device-mapper: hash matches
[ 2.087741] rtc_cmos rtc_cmos: setting system clock to 2015-10-30 08:08:52 UTC (1446192532)
[ 2.088262] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.088266] EDD information not available.
[ 2.088554] PM: Hibernation image not present or could not be loaded.
[ 2.089606] Freeing unused kernel memory: 1460K (ffffffff81d3e000 - ffffffff81eab000)
[ 2.089613] Write protecting the kernel read-only data: 12288k
[ 2.090964] Freeing unused kernel memory: 272K (ffff8800027bc000 - ffff880002800000)
[ 2.091455] Freeing unused kernel memory: 200K (ffff880002bce000 - ffff880002c00000)
[ 2.125389] systemd-udevd[131]: starting version 204
[ 2.147138] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 2.153914] sdhci: Secure Digital Host Controller Interface driver
[ 2.153919] sdhci: Copyright(c) Pierre Ossman
[ 2.156435] sdhci-acpi 80860F14:00: failed to setup card detect gpio
[ 2.157456] sdhci-acpi 80860F14:00: No vmmc regulator found
[ 2.157462] sdhci-acpi 80860F14:00: No vqmmc regulator found
[ 2.160974] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 2.179645] ahci 0000:00:13.0: version 3.0
[ 2.179897] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.179903] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst
[ 2.180560] scsi host0: ahci
[ 2.180846] scsi host1: ahci
[ 2.180935] ata1: SATA max UDMA/133 abar m2048@0x81427000 port 0x81427100 irq 116
[ 2.180939] ata2: SATA max UDMA/133 abar m2048@0x81427000 port 0x81427180 irq 116
[ 2.183569] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.183587] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.191451] r8169 0000:03:00.0 eth0: RTL8168h/8111h at 0xffffc90000e7e000, b8:ae:ed:77:d6:ab, XID 14100800 IRQ 117
[ 2.191457] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.349548] usb 1-3: new low-speed USB device number 2 using xhci_hcd
[ 2.497396] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.499284] ata1.00: ATA-9: CT250BX100SSD1, MU02, max UDMA/133
[ 2.499292] ata1.00: 488397168 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 2.501122] ata2: SATA link down (SStatus 4 SControl 300)
[ 2.501292] ata1.00: configured for UDMA/133
[ 2.502336] scsi 0:0:0:0: Direct-Access ATA CT250BX100SSD1 MU02 PQ: 0 ANSI: 5
[ 2.503281] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.503308] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.503645] sd 0:0:0:0: [sda] Write Protect is off
[ 2.503652] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.503889] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.509557] sda: sda1 sda2 sda3 sda4 sda5
[ 2.511324] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.536819] usb 1-3: New USB device found, idVendor=046d, idProduct=c05a
[ 2.536825] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.536829] usb 1-3: Product: USB Optical Mouse
[ 2.536832] usb 1-3: Manufacturer: Logitech
[ 2.537165] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.544236] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.549716] usbcore: registered new interface driver usbhid
[ 2.549721] usbhid: USB HID core driver
[ 2.552961] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C05A.0001/input/input6
[ 2.553496] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-3/input0
[ 2.563937] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.649324] usb 1-4: new low-speed USB device number 3 using xhci_hcd
[ 2.687183] random: init urandom read with 18 bits of entropy available
[ 2.740706] init: plymouth-upstart-bridge main process (194) terminated with status 1
[ 2.740737] init: plymouth-upstart-bridge main process ended, respawning
[ 2.755730] init: plymouth-upstart-bridge main process (204) terminated with status 1
[ 2.755756] init: plymouth-upstart-bridge main process ended, respawning
[ 2.767763] init: ureadahead main process (197) terminated with status 5
[ 2.767907] init: plymouth-upstart-bridge main process (207) terminated with status 1
[ 2.767930] init: plymouth-upstart-bridge main process ended, respawning
[ 2.838724] usb 1-4: New USB device found, idVendor=046d, idProduct=c31d
[ 2.838731] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.838734] usb 1-4: Product: USB Keyboard
[ 2.838737] usb 1-4: Manufacturer: Logitech
[ 2.838975] usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.838985] usb 1-4: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 2.844184] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C31D.0002/input/input7
[ 2.897348] hid-generic 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-4/input0
[ 2.904463] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C31D.0003/input/input8
[ 2.949264] tsc: Refined TSC clocksource calibration: 1599.946 MHz
[ 2.949273] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170ff1f21a7, max_idle_ns: 440795248081 ns
[ 2.950883] Adding 8306684k swap on /dev/sda3. Priority:-1 extents:1 across:8306684k SSFS
[ 2.961745] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 2.961841] hid-generic 0003:046D:C31D.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-4/input1
[ 3.073208] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 3.142700] systemd-udevd[353]: starting version 204
[ 3.202447] usb 1-5: New USB device found, idVendor=05e3, idProduct=0610
[ 3.202453] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.202456] usb 1-5: Product: USB2.0 Hub
[ 3.203186] hub 1-5:1.0: USB hub found
[ 3.203495] hub 1-5:1.0: 4 ports detected
[ 3.205163] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.264885] lp: driver loaded but no devices found
[ 3.304093] 8086228A:00: ttyS4 at MMIO 0x81420000 (irq = 39, base_baud = 2764800) is a 16550A
[ 3.304635] 8086228A:01: ttyS5 at MMIO 0x8141e000 (irq = 40, base_baud = 2764800) is a 16550A
[ 3.362691] ppdev: user-space parallel port driver
[ 3.380519] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 3.387242] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 3.391887] nfc: nfc_init: NFC Core ver 0.1
[ 3.391966] NET: Registered protocol family 39
[ 3.424419] ite_cir: Auto-detected model: ITE8713 CIR transceiver
[ 3.424425] ite_cir: Using model: ITE8713 CIR transceiver
[ 3.424428] ite_cir: TX-capable: 1
[ 3.424430] ite_cir: Sample period (ns): 8680
[ 3.424431] ite_cir: TX carrier frequency (Hz): 38000
[ 3.424433] ite_cir: TX duty cycle (%): 33
[ 3.424435] ite_cir: RX low carrier frequency (Hz): 0
[ 3.424436] ite_cir: RX high carrier frequency (Hz): 0
[ 3.457093] Registered IR keymap rc-rc6-mce
[ 3.457270] input: ITE8713 CIR transceiver as /devices/virtual/rc/rc0/input9
[ 3.458961] rc0: ITE8713 CIR transceiver as /devices/virtual/rc/rc0
[ 3.460141] FS-Cache: Loaded
[ 3.465865] IR NEC protocol handler initialized
[ 3.469534] IR RC5(x/sz) protocol handler initialized
[ 3.477110] usb 1-5.1: new full-speed USB device number 5 using xhci_hcd
[ 3.491269] RPC: Registered named UNIX socket transport module.
[ 3.491274] RPC: Registered udp transport module.
[ 3.491276] RPC: Registered tcp transport module.
[ 3.491278] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.494062] IR JVC protocol handler initialized
[ 3.495803] IR RC6 protocol handler initialized
[ 3.500071] IR Sony protocol handler initialized
[ 3.506059] IR SANYO protocol handler initialized
[ 3.525818] IR Sharp protocol handler initialized
[ 3.525962] FS-Cache: Netfs 'nfs' registered for caching
[ 3.531665] IR MCE Keyboard/mouse protocol handler initialized
[ 3.547653] lirc_dev: IR Remote Control driver registered, major 247
[ 3.551051] IR XMP protocol handler initialized
[ 3.552343] IR LIRC bridge handler initialized
[ 3.555796] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input10
[ 3.558581] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
[ 3.558616] ite_cir: driver has been successfully loaded
[ 3.561778] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 3.569816] usb 1-5.1: New USB device found, idVendor=8087, idProduct=0a2a
[ 3.569824] usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.586647] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.701431] [drm] Initialized drm 1.1.0 20060810
[ 3.748270] Intel(R) Wireless WiFi driver for Linux
[ 3.748275] Copyright(c) 2003- 2015 Intel Corporation
[ 3.748832] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 3.756818] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2
[ 3.756857] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-16.ucode failed with error -2
[ 3.757714] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-15.ucode failed with error -2
[ 3.766285] iwlwifi 0000:02:00.0: loaded firmware version 25.30.14.0 op_mode iwlmvm
[ 3.796787] [drm] Memory usable by graphics device = 2048M
[ 3.796797] checking generic (88000000 500000) vs hw (88000000 8000000)
[ 3.796800] fb: switching to inteldrmfb from EFI VGA
[ 3.796853] Console: switching to colour dummy device 80x25
[ 3.797093] [drm] Replacing VGA console driver
[ 3.798808] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.798814] [drm] Driver supports precise vblank timestamp query.
[ 3.803640] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.807418] [drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 21: Can't calculate constants, dotclock = 0!
[ 3.807450] [drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 31: Can't calculate constants, dotclock = 0!
[ 3.831099] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[ 3.831826] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 3.832502] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.832559] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 3.832871] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 3.856907] SSE version of gcm_enc/dec engaged.
[ 3.912497] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.912507] [drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor 0
[ 3.913286] fbcon: inteldrmfb (fb0) is primary device
[ 3.962206] clocksource: Switched to clocksource tsc
[ 3.985383] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 4.029754] [drm:chv_set_memory_dvfs [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[ 4.032348] intel_rapl: Found RAPL domain package
[ 4.032351] intel_rapl: Found RAPL domain core
[ 4.078740] Bluetooth: Core ver 2.20
[ 4.078769] NET: Registered protocol family 31
[ 4.078770] Bluetooth: HCI device and connection manager initialized
[ 4.078777] Bluetooth: HCI socket layer initialized
[ 4.078780] Bluetooth: L2CAP socket layer initialized
[ 4.078788] Bluetooth: SCO socket layer initialized
[ 4.089435] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.089436] Bluetooth: BNEP filters: protocol multicast
[ 4.089443] Bluetooth: BNEP socket layer initialized
[ 4.129616] cfg80211: World regulatory domain updated:
[ 4.129619] cfg80211: DFS Master region: unset
[ 4.129619] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.129623] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.129625] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.129626] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.129628] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.129629] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.141932] iwlwifi 0000:02:00.0 wlan2: renamed from wlan0
[ 4.148530] usbcore: registered new interface driver btusb
[ 4.161317] systemd-udevd[374]: renamed network interface wlan0 to wlan2
[ 4.164743] Bluetooth: hci0: read Intel version: 370810011003110e0f
[ 4.164745] Bluetooth: hci0: Intel device is already patched. patch num: 0f
[ 4.236939] [drm:chv_set_memory_dvfs [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[ 4.633412] Console: switching to colour frame buffer device 240x67
[ 4.645270] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.650553] Bluetooth: RFCOMM TTY layer initialized
[ 4.650573] Bluetooth: RFCOMM socket layer initialized
[ 4.650588] Bluetooth: RFCOMM ver 1.11
[ 4.699717] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=2 (0x1b/0x21/0x0/0x0/0x0) type:hp
[ 4.699725] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.699728] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.699731] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.699734] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 4.699736] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.699740] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 4.803908] audit: type=1400 audit(1446192535.210:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=682 comm="apparmor_parser"
[ 4.803919] audit: type=1400 audit(1446192535.210:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=682 comm="apparmor_parser"
[ 4.803925] audit: type=1400 audit(1446192535.210:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=682 comm="apparmor_parser"
[ 4.804793] audit: type=1400 audit(1446192535.210:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=682 comm="apparmor_parser"
[ 4.804803] audit: type=1400 audit(1446192535.210:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=682 comm="apparmor_parser"
[ 4.805278] audit: type=1400 audit(1446192535.214:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=682 comm="apparmor_parser"
[ 4.808144] audit: type=1400 audit(1446192535.214:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=678 comm="apparmor_parser"
[ 4.808154] audit: type=1400 audit(1446192535.214:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=678 comm="apparmor_parser"
[ 4.814035] audit: type=1400 audit(1446192535.222:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=678 comm="apparmor_parser"
[ 5.790289] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 5.791110] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 5.856244] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 5.856997] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 5.885522] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[ 5.911817] r8169 0000:03:00.0 eth0: link down
[ 5.912220] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.933553] random: nonblocking pool is initialized
[ 5.937445] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[ 5.976327] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 5.976469] input: HDA Intel PCH Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 5.976583] input: HDA Intel PCH Front Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 5.976698] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.736677] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 6.737046] NFSD: starting 90-second grace period (net ffffffff81cf1c80)
[ 7.471861] init: plymouth-upstart-bridge main process ended, respawning
[ 7.489072] init: plymouth-upstart-bridge main process (1310) terminated with status 1
[ 7.489100] init: plymouth-upstart-bridge main process ended, respawning
[ 9.632908] ahci 0000:00:13.0: port does not support device sleep
[ 10.019711] wlan2: authenticate with 7c:b7:33:31:20:ec
[ 10.030292] wlan2: send auth to 7c:b7:33:31:20:ec (try 1/3)
[ 10.033280] wlan2: authenticated
[ 10.036884] wlan2: associate with 7c:b7:33:31:20:ec (try 1/3)
[ 10.040670] wlan2: RX AssocResp from 7c:b7:33:31:20:ec (capab=0x1411 status=0 aid=1)
[ 10.041592] wlan2: associated
[ 10.041654] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[ 10.197801] wlan2: deauthenticating from 7c:b7:33:31:20:ec by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 10.214895] wlan2: authenticate with 7c:b7:33:31:20:ec
[ 10.219109] wlan2: send auth to 7c:b7:33:31:20:ec (try 1/3)
[ 10.221221] wlan2: authenticated
[ 10.224881] wlan2: associate with 7c:b7:33:31:20:ec (try 1/3)
[ 10.228675] wlan2: RX AssocResp from 7c:b7:33:31:20:ec (capab=0x1411 status=0 aid=1)
[ 10.229954] wlan2: associated
[ 90.369443] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=6804 end=6805)
[ 125.920969] audit_printk_skb: 153 callbacks suppressed
[ 125.920976] audit: type=1400 audit(1446192656.388:62): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=2336 comm="apparmor_parser"
[ 125.920986] audit: type=1400 audit(1446192656.388:63): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2336 comm="apparmor_parser"
[ 125.920992] audit: type=1400 audit(1446192656.388:64): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=2336 comm="apparmor_parser"
[ 125.921831] audit: type=1400 audit(1446192656.388:65): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2336 comm="apparmor_parser"
[ 125.921839] audit: type=1400 audit(1446192656.388:66): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=2336 comm="apparmor_parser"
[ 125.922259] audit: type=1400 audit(1446192656.388:67): apparmor="STATUS" operation="profile_replace" name="/usr/lib/lightdm/lightdm-guest-session" pid=2335 comm="apparmor_parser"
[ 125.935514] audit: type=1400 audit(1446192656.404:68): apparmor="STATUS" operation="profile_replace" name="chromium" pid=2335 comm="apparmor_parser"
[ 125.935776] audit: type=1400 audit(1446192656.404:69): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=2336 comm="apparmor_parser"
[ 125.935829] audit: type=1400 audit(1446192656.404:70): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=2337 comm="apparmor_parser"
[ 125.955286] audit: type=1400 audit(1446192656.424:71): apparmor="STATUS" operation="profile_replace" name="sanitized_helper" pid=2337 comm="apparmor_parser"Hors ligne
#2 Le 09/02/2016, à 09:57
- DrFunk
Re : Intel NUC5PPYH problème de stabilité HDMI 14.04 15.04 mais pas en vga
Bonjour à tous
Visiblement je ne suis pas un cas isolé.
https://bugs.freedesktop.org/show_bug.cgi?id=93098
En espérant une résolution rapide
Hors ligne
#3 Le 22/02/2016, à 15:32
- Vience
Re : Intel NUC5PPYH problème de stabilité HDMI 14.04 15.04 mais pas en vga
Bonjour,
je n'ai malheureusement pas de réponse mais simplement pour dire que j'ai le même problème sur la même machine...
j'ai demander assistance au vendeur voici ce qu'il ma conseillé:
" Je vous recommande de télécharger les derniers pilotes pour votre chipset graphique directement sur le site https://01.org/linuxgraphics/downloads, vous trouverez des packages compatibles avec Ubuntu, comme le https://download.01.org/gfx/ubuntu/15.1 … _amd64.deb...
j'ai fais la manipulation (peu etres mal je suis novice) et j'ai toujours le même problème...
dans l'attente de trouver une solution, bien cordialement.
Hors ligne