Pages : 1
#1 Le 10/11/2015, à 10:04
- abelthorne
Pas d'affichage durant le boot
Bonjour,
Depuis Ubuntu 14.10 − peut-être même 14.04 −, j'ai un problème d'affichage pendant la séquence de démarrage de mon PC : entre GRUB et l'écran de connexion (qui s'affichent tous les deux), pendant toute la séquence qui devrait m'afficher l'écran de chargement avec le logo de l'OS, mon moniteur alterne entre une perte de signal et un écran noir ; je vois son overlay qui alterne plusieurs fois entre "pas d'entrée signal" et "DVI". Je m'en suis accommodé, pensant que le problème finirait par être résolu mais ce n'est toujours pas le cas en 15.10 et ça commence à être lourd ; et je me dis que ce n'est pas forcément très bon pour le matériel à terme.
J'imagine que Plymouth n'arrive pas à déterminer la résolution/fréquence max à utiliser. J'ai essayé deux méthodes pour résoudre ce problème, sans succès : une qui ne concerne potentiellement que les GPU nVidia (j'ai une carte ATI) et une qui consiste à utiliser le framebuffer.
Une idée de ce que je pourrais tenter d'autre ?
Hors ligne
#2 Le 20/11/2015, à 20:25
- ratm54
Re : Pas d'affichage durant le boot
Il faut déterminer quel est le pilote graphique utilisé et éventuellemet switcher entre la solution libre et propriétaire
De plus regarde dans les log si tu voit des erreurs (dmesg, /var/logxorg)
Hors ligne
#3 Le 21/11/2015, à 00:12
- abelthorne
Re : Pas d'affichage durant le boot
Pilote libre (Mesa/RadeonSi). Vu l'état de Catalyst, surtout en 15.10, je n'ai pas spécialement envie de tester le pilote proprio...
Je ne sais pas trop quoi chercher dans le log de X mais je ne vois rien de particulier à première vue. À part qu'il me liste les modelines en boucle une vingtaine de fois sans différences. Je ne sais pas si ça correspond aux moment où il "réinitialise" l'affichage pendant le boot...
Hors ligne
#4 Le 21/11/2015, à 00:44
- moko138
Re : Pas d'affichage durant le boot
Donne dmesg dès que tu arrives sur le bureau.
Dernière modification par moko138 (Le 21/11/2015, à 00:44)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#5 Le 21/11/2015, à 12:05
- abelthorne
Re : Pas d'affichage durant le boot
À tout hasard, voilà le dmesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0-18-generic (buildd@lgw01-38) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #22-Ubuntu SMP Fri Nov 6 18:25:50 UTC 2015 (Ubuntu 4.2.0-18.22-generic 4.2.3)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-18-generic root=UUID=e749d1e7-b4de-44a6-b3d5-0c1af5e34242 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] tseg: 00cff00000
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfdeffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdf2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfdf3000-0x00000000cfdfffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-880GM-UD2H/GA-880GM-UD2H, BIOS F8 10/11/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 4608MB, range: 256MB, type WB
[ 0.000000] total RAM covered: 3326M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5820-0x000f582f] mapped at [ffff8800000f5820]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01ff0000, 0x01ff0fff] PGTABLE
[ 0.000000] BRK [0x01ff1000, 0x01ff1fff] PGTABLE
[ 0.000000] BRK [0x01ff2000, 0x01ff2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
[ 0.000000] BRK [0x01ff3000, 0x01ff3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x12fdfffff]
[ 0.000000] [mem 0x120000000-0x12fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[ 0.000000] [mem 0x100000000-0x11fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcfdeffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfbfffff] page 2M
[ 0.000000] [mem 0xcfc00000-0xcfdeffff] page 4k
[ 0.000000] RAMDISK: [mem 0x33fa2000-0x35fc8fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F71E0 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 0x00000000CFDF3000 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 0x00000000CFDF3040 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 0x00000000CFDF30C0 007224 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x00000000CFDF0000 000040
[ 0.000000] ACPI: SSDT 0x00000000CFDFA3C0 0008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 0x00000000CFDFACC0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 0x00000000CFDFAD00 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 0x00000000CFDFA300 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x12fff9000-0x12fffdfff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfdeffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
[ 0.000000] On node 0 totalpages: 1047950
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13240 pages used for memmap
[ 0.000000] DMA32 zone: 847344 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 5 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfdf0000-0xcfdf2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfdf3000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xcfefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88012fc00000 s96728 r8192 d30248 u262144
[ 0.000000] pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031553
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-18-generic root=UUID=e749d1e7-b4de-44a6-b3d5-0c1af5e34242 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xc298000000-0xc299ffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 3943992K/4191800K available (8146K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 247808K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3214.186 MHz processor
[ 0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 6428.37 BogoMIPS (lpj=12856744)
[ 0.000030] pid_max: default: 32768 minimum: 301
[ 0.000035] ACPI: Core revision 20150619
[ 0.002534] ACPI: All ACPI Tables successfully acquired
[ 0.002552] Security Framework initialized
[ 0.002564] AppArmor: AppArmor initialized
[ 0.002565] Yama: becoming mindful.
[ 0.002805] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003995] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004562] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004566] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004776] Initializing cgroup subsys blkio
[ 0.004779] Initializing cgroup subsys memory
[ 0.004787] Initializing cgroup subsys devices
[ 0.004789] Initializing cgroup subsys freezer
[ 0.004791] Initializing cgroup subsys net_cls
[ 0.004793] Initializing cgroup subsys perf_event
[ 0.004795] Initializing cgroup subsys net_prio
[ 0.004798] Initializing cgroup subsys hugetlb
[ 0.004815] CPU: Physical Processor ID: 0
[ 0.004816] CPU: Processor Core ID: 0
[ 0.004818] mce: CPU supports 6 MCE banks
[ 0.004822] LVT offset 0 assigned for vector 0xf9
[ 0.004826] process: using AMD E400 aware idle routine
[ 0.004827] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.004828] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.004922] Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
[ 0.022354] ftrace: allocating 30905 entries in 121 pages
[ 0.374435] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.519840] smpboot: CPU0: AMD Athlon(tm) II X3 450 Processor (fam: 10, model: 05, stepping: 03)
[ 0.519865] Performance Events: AMD PMU driver.
[ 0.519869] ... version: 0
[ 0.519870] ... bit width: 48
[ 0.519870] ... generic registers: 4
[ 0.519871] ... value mask: 0000ffffffffffff
[ 0.519872] ... max period: 00007fffffffffff
[ 0.519873] ... fixed-purpose events: 0
[ 0.519874] ... event mask: 000000000000000f
[ 0.520487] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.520570] x86: Booting SMP configuration:
[ 0.520572] .... node #0, CPUs: #1
[ 0.523747] process: System has AMD C1E enabled
[ 0.523762] process: Switch to broadcast mode on CPU1
[ 0.523770] #2
[ 0.526889] x86: Booted up 1 node, 3 CPUs
[ 0.526891] smpboot: Total of 3 processors activated (19285.11 BogoMIPS)
[ 0.527253] process: Switch to broadcast mode on CPU2
[ 0.527301] process: Switch to broadcast mode on CPU0
[ 0.527524] devtmpfs: initialized
[ 0.530647] evm: security.selinux
[ 0.530648] evm: security.SMACK64
[ 0.530649] evm: security.SMACK64EXEC
[ 0.530649] evm: security.SMACK64TRANSMUTE
[ 0.530650] evm: security.SMACK64MMAP
[ 0.530651] evm: security.ima
[ 0.530652] evm: security.capability
[ 0.530776] PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf2fff] (12288 bytes)
[ 0.530884] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.531007] pinctrl core: initialized pinctrl subsystem
[ 0.531128] RTC time: 11:00:54, date: 11/21/15
[ 0.531243] NET: Registered protocol family 16
[ 0.535861] cpuidle: using governor ladder
[ 0.539859] cpuidle: using governor menu
[ 0.539871] node 0 link 0: io port [c000, ffff]
[ 0.539874] TOM: 00000000d0000000 aka 3328M
[ 0.539876] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.539877] node 0 link 0: mmio [a0000, bffff]
[ 0.539879] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.539881] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.539882] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
[ 0.539884] TOM2: 0000000130000000 aka 4864M
[ 0.539886] bus: [bus 00-03] on node 0 link 0
[ 0.539887] bus: 00 [io 0x0000-0xffff]
[ 0.539888] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.539889] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.539890] bus: 00 [mem 0xe0400000-0xffffffff]
[ 0.539891] bus: 00 [mem 0xe0100000-0xe03fffff]
[ 0.539892] bus: 00 [mem 0x130000000-0xfcffffffff]
[ 0.540005] ACPI: bus type PCI registered
[ 0.540007] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.540082] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.540084] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.540097] PCI: Using configuration type 1 for base access
[ 0.544406] ACPI: Added _OSI(Module Device)
[ 0.544409] ACPI: Added _OSI(Processor Device)
[ 0.544410] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.544411] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.548148] ACPI: Interpreter enabled
[ 0.548156] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.548160] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.548170] ACPI: (supports S0 S3 S4 S5)
[ 0.548171] ACPI: Using IOAPIC for interrupt routing
[ 0.548224] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.551256] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.551262] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.551266] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.551439] PCI host bridge to bus 0000:00
[ 0.551441] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.551443] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.551445] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.551447] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.551448] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.551450] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
[ 0.551457] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[ 0.551472] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[ 0.551541] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
[ 0.551568] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.551600] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.551637] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
[ 0.551663] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.551692] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.551732] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.551757] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
[ 0.551766] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.551774] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.551783] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.551792] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.551829] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.551849] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.551917] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.551932] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.552011] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.552042] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.552056] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.552135] pci 0000:00:12.1: System wakeup disabled by ACPI
[ 0.552168] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.552192] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.552254] pci 0000:00:12.2: supports D1 D2
[ 0.552255] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.552287] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.552322] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.552337] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.552414] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.552444] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.552458] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.552537] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.552570] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.552594] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.552656] pci 0000:00:13.2: supports D1 D2
[ 0.552657] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.552689] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.552727] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.552855] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.552878] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.552886] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.552895] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.552903] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.552912] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
[ 0.552931] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.552933] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.552934] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.552935] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.553000] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.553026] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.553079] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.553109] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.553140] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.553256] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.553314] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.553345] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.553359] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
[ 0.553436] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.553469] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.553522] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.553572] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.553624] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.553676] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.553762] pci 0000:01:00.0: [1002:683d] type 00 class 0x030000
[ 0.553781] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.553789] pci 0000:01:00.0: reg 0x18: [mem 0xfdf80000-0xfdfbffff 64bit]
[ 0.553794] pci 0000:01:00.0: reg 0x20: [io 0xee00-0xeeff]
[ 0.553803] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.553822] pci 0000:01:00.0: supports D1 D2
[ 0.553823] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.553862] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.553880] pci 0000:01:00.1: reg 0x10: [mem 0xfdffc000-0xfdffffff 64bit]
[ 0.553916] pci 0000:01:00.1: supports D1 D2
[ 0.559875] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.559881] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.559884] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.559887] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.559953] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.559981] pci 0000:02:00.0: reg 0x10: [io 0xde00-0xdeff]
[ 0.560000] pci 0000:02:00.0: reg 0x18: [mem 0xfdbff000-0xfdbfffff 64bit pref]
[ 0.560012] pci 0000:02:00.0: reg 0x20: [mem 0xfdbf8000-0xfdbfbfff 64bit pref]
[ 0.560059] pci 0000:02:00.0: supports D1 D2
[ 0.560060] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.567888] pci 0000:00:0a.0: PCI bridge to [bus 02]
[ 0.567893] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.567896] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.567899] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.567974] pci 0000:03:0e.0: [104c:8024] type 00 class 0x0c0010
[ 0.568005] pci 0000:03:0e.0: reg 0x10: [mem 0xfddff000-0xfddff7ff]
[ 0.568017] pci 0000:03:0e.0: reg 0x14: [mem 0xfddf8000-0xfddfbfff]
[ 0.568098] pci 0000:03:0e.0: supports D1 D2
[ 0.568099] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.568166] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.568170] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.568173] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.568177] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.568179] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.568181] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.568182] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.568184] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.568185] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode)
[ 0.568201] pci_bus 0000:00: on NUMA node 0
[ 0.568392] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.568428] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.568461] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.568493] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.568525] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.568556] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.568588] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.568619] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.569092] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.569094] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.569095] vgaarb: loaded
[ 0.569097] vgaarb: bridge control possible 0000:01:00.0
[ 0.569322] SCSI subsystem initialized
[ 0.569400] libata version 3.00 loaded.
[ 0.569421] ACPI: bus type USB registered
[ 0.569437] usbcore: registered new interface driver usbfs
[ 0.569445] usbcore: registered new interface driver hub
[ 0.569458] usbcore: registered new device driver usb
[ 0.569669] PCI: Using ACPI for IRQ routing
[ 0.577918] PCI: pci_cache_line_size set to 64 bytes
[ 0.577972] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.577974] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff]
[ 0.578083] NetLabel: Initializing
[ 0.578084] NetLabel: domain hash size = 128
[ 0.578085] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.578095] NetLabel: unlabeled traffic allowed by default
[ 0.578192] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.578196] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.580262] clocksource: Switched to clocksource hpet
[ 0.585872] AppArmor: AppArmor Filesystem Enabled
[ 0.585943] pnp: PnP ACPI init
[ 0.586041] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.586043] system 00:00: [io 0x0220-0x0225] has been reserved
[ 0.586045] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.586049] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.586244] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.586267] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.586270] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.586271] system 00:01: [io 0x040b] has been reserved
[ 0.586273] system 00:01: [io 0x04d6] has been reserved
[ 0.586274] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.586276] system 00:01: [io 0x0c14] has been reserved
[ 0.586278] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.586279] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.586281] system 00:01: [io 0x0c6f] has been reserved
[ 0.586282] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.586284] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.586286] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.586287] system 00:01: [io 0x4000-0x40fe] could not be reserved
[ 0.586289] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.586291] system 00:01: [io 0x0b00-0x0b0f] has been reserved
[ 0.586292] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.586294] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.586296] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.586298] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.586408] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.586644] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.586704] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.586707] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.586839] system 00:05: [mem 0x000d1000-0x000d3fff] has been reserved
[ 0.586841] system 00:05: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.586843] system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.586845] system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.586846] system 00:05: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
[ 0.586848] system 00:05: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.586850] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.586852] system 00:05: [mem 0x00100000-0xcfdeffff] could not be reserved
[ 0.586853] system 00:05: [mem 0xcfe00000-0xcfefffff] has been reserved
[ 0.586855] system 00:05: [mem 0xcff00000-0xcfffffff] could not be reserved
[ 0.586857] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.586859] system 00:05: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.586861] system 00:05: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.586863] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.586876] pnp: PnP ACPI: found 6 devices
[ 0.593820] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.593848] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 0.593851] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.593853] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.593855] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.593858] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.593861] pci 0000:00:0a.0: PCI bridge to [bus 02]
[ 0.593862] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.593865] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.593867] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.593870] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.593872] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.593877] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.593880] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.593887] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.593888] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.593890] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.593891] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.593893] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff window]
[ 0.593895] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.593896] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.593898] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.593900] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.593901] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.593903] pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.593905] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.593906] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.593908] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 0.593909] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.593911] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.593913] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.593914] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.593916] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff window]
[ 0.593948] NET: Registered protocol family 2
[ 0.594117] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.594211] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.594341] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.594391] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.594412] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.594493] NET: Registered protocol family 1
[ 0.952951] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.952961] PCI: CLS 4 bytes, default 64
[ 0.953034] Trying to unpack rootfs image as initramfs...
[ 1.398649] Freeing initrd memory: 32924K (ffff880033fa2000 - ffff880035fc9000)
[ 1.398875] PCI-DMA: Disabling AGP.
[ 1.398951] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.398952] PCI-DMA: using GART IOMMU.
[ 1.398954] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.401238] microcode: CPU0: patch_level=0x010000c8
[ 1.401258] microcode: CPU1: patch_level=0x010000c8
[ 1.401266] microcode: CPU2: patch_level=0x010000c8
[ 1.401364] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.401368] LVT offset 1 assigned for vector 0x400
[ 1.401375] IBS: LVT offset 1 assigned
[ 1.401396] perf: AMD IBS detected (0x0000001f)
[ 1.401483] Scanning for low memory corruption every 60 seconds
[ 1.401798] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.401832] Initialise system trusted keyring
[ 1.401852] audit: initializing netlink subsys (disabled)
[ 1.401868] audit: type=2000 audit(1448103653.948:1): initialized
[ 1.402243] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 1.402246] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.403489] zpool: loaded
[ 1.403491] zbud: loaded
[ 1.403771] VFS: Disk quotas dquot_6.6.0
[ 1.403808] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.404374] fuse init (API version 7.23)
[ 1.404561] Key type big_key registered
[ 1.405300] Key type asymmetric registered
[ 1.405305] Asymmetric key parser 'x509' registered
[ 1.405331] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.405463] io scheduler noop registered
[ 1.405466] io scheduler deadline registered (default)
[ 1.405506] io scheduler cfq registered
[ 1.405846] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.405852] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.405878] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 1.405879] vesafb: scrolling: redraw
[ 1.405881] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.405894] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 8128k, total 8128k
[ 1.406039] Console: switching to colour frame buffer device 240x67
[ 1.406065] fb0: VESA VGA frame buffer device
[ 1.406134] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.406137] ACPI: Power Button [PWRB]
[ 1.406174] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.406175] ACPI: Power Button [PWRF]
[ 1.406202] ACPI: processor limited to max C-state 1
[ 1.406397] GHES: HEST is not enabled!
[ 1.406509] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.426982] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.428946] Linux agpgart interface v0.103
[ 1.431438] brd: module loaded
[ 1.432679] loop: module loaded
[ 1.432912] libphy: Fixed MDIO Bus: probed
[ 1.432914] tun: Universal TUN/TAP device driver, 1.6
[ 1.432915] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.432996] PPP generic driver version 2.4.2
[ 1.433069] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.433073] ehci-pci: EHCI PCI platform driver
[ 1.433211] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.433217] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.433221] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.433230] ehci-pci 0000:00:12.2: debug port 1
[ 1.433274] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 1.441468] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.441533] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.441535] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.441537] usb usb1: Product: EHCI Host Controller
[ 1.441538] usb usb1: Manufacturer: Linux 4.2.0-18-generic ehci_hcd
[ 1.441539] usb usb1: SerialNumber: 0000:00:12.2
[ 1.441689] hub 1-0:1.0: USB hub found
[ 1.441694] hub 1-0:1.0: 6 ports detected
[ 1.441939] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.441944] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.441947] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.441956] ehci-pci 0000:00:13.2: debug port 1
[ 1.441998] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[ 1.453484] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.453537] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.453539] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.453540] usb usb2: Product: EHCI Host Controller
[ 1.453541] usb usb2: Manufacturer: Linux 4.2.0-18-generic ehci_hcd
[ 1.453543] usb usb2: SerialNumber: 0000:00:13.2
[ 1.453692] hub 2-0:1.0: USB hub found
[ 1.453697] hub 2-0:1.0: 6 ports detected
[ 1.453830] ehci-platform: EHCI generic platform driver
[ 1.453842] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.453845] ohci-pci: OHCI PCI platform driver
[ 1.453967] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.453972] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.454001] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 1.513588] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.513591] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.513593] usb usb3: Product: OHCI PCI host controller
[ 1.513594] usb usb3: Manufacturer: Linux 4.2.0-18-generic ohci_hcd
[ 1.513595] usb usb3: SerialNumber: 0000:00:12.0
[ 1.513756] hub 3-0:1.0: USB hub found
[ 1.513764] hub 3-0:1.0: 3 ports detected
[ 1.513959] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.513964] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.513985] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.573666] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.573669] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.573671] usb usb4: Product: OHCI PCI host controller
[ 1.573672] usb usb4: Manufacturer: Linux 4.2.0-18-generic ohci_hcd
[ 1.573673] usb usb4: SerialNumber: 0000:00:12.1
[ 1.573832] hub 4-0:1.0: USB hub found
[ 1.573839] hub 4-0:1.0: 3 ports detected
[ 1.574037] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.574043] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.574077] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.633744] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.633747] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.633748] usb usb5: Product: OHCI PCI host controller
[ 1.633750] usb usb5: Manufacturer: Linux 4.2.0-18-generic ohci_hcd
[ 1.633751] usb usb5: SerialNumber: 0000:00:13.0
[ 1.633910] hub 5-0:1.0: USB hub found
[ 1.633919] hub 5-0:1.0: 3 ports detected
[ 1.634118] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.634123] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.634143] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.693823] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.693826] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.693828] usb usb6: Product: OHCI PCI host controller
[ 1.693829] usb usb6: Manufacturer: Linux 4.2.0-18-generic ohci_hcd
[ 1.693830] usb usb6: SerialNumber: 0000:00:13.1
[ 1.693986] hub 6-0:1.0: USB hub found
[ 1.693995] hub 6-0:1.0: 3 ports detected
[ 1.694197] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.694201] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.694222] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.753837] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.753907] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.753910] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.753911] usb usb7: Product: OHCI PCI host controller
[ 1.753913] usb usb7: Manufacturer: Linux 4.2.0-18-generic ohci_hcd
[ 1.753914] usb usb7: SerialNumber: 0000:00:14.5
[ 1.754090] hub 7-0:1.0: USB hub found
[ 1.754097] hub 7-0:1.0: 2 ports detected
[ 1.754187] ohci-platform: OHCI generic platform driver
[ 1.754199] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.754252] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.787622] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.787623] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.887743] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 1.887747] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.887749] usb 1-1: Product: USB2.0 Hub
[ 1.888159] hub 1-1:1.0: USB hub found
[ 1.888491] hub 1-1:1.0: 4 ports detected
[ 2.038334] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.038508] mousedev: PS/2 mouse device common for all mice
[ 2.038684] rtc_cmos 00:02: RTC can wake from S4
[ 2.038852] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.038889] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.038898] i2c /dev entries driver
[ 2.038977] device-mapper: uevent: version 1.0.3
[ 2.039095] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[ 2.039115] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.039429] PCCT header not found.
[ 2.039640] NET: Registered protocol family 10
[ 2.039880] NET: Registered protocol family 17
[ 2.039892] Key type dns_resolver registered
[ 2.040269] Loading compiled-in X.509 certificates
[ 2.041153] Loaded X.509 cert 'Build time autogenerated kernel key: 93ad27021225ce1bb4865e4bab1e2b6a5f099429'
[ 2.041166] registered taskstats version 1
[ 2.041181] zswap: loading zswap
[ 2.041183] zswap: using zbud pool
[ 2.041187] zswap: using lzo compressor
[ 2.043591] Key type trusted registered
[ 2.048274] Key type encrypted registered
[ 2.048285] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.048289] ima: No TPM chip found, activating TPM-bypass!
[ 2.048312] evm: HMAC attrs: 0x1
[ 2.048625] Magic number: 7:735:24
[ 2.048631] misc cpu_dma_latency: hash matches
[ 2.048752] rtc_cmos 00:02: setting system clock to 2015-11-21 11:00:56 UTC (1448103656)
[ 2.048911] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.049013] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.049014] EDD information not available.
[ 2.049062] PM: Hibernation image not present or could not be loaded.
[ 2.049565] Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
[ 2.049569] Write protecting the kernel read-only data: 12288k
[ 2.049728] Freeing unused kernel memory: 36K (ffff8800017f7000 - ffff880001800000)
[ 2.049854] Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
[ 2.064870] random: systemd-udevd urandom read with 6 bits of entropy available
[ 2.098544] wmi: Mapper loaded
[ 2.105205] [drm] Initialized drm 1.1.0 20060810
[ 2.105734] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.105745] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.106079] r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffc9000063e000, 1c:6f:65:8f:41:a6, XID 0c200000 IRQ 26
[ 2.106081] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.109593] ahci 0000:00:11.0: version 3.0
[ 2.109800] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.109804] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.110455] scsi host0: ahci
[ 2.110545] scsi host1: ahci
[ 2.110615] scsi host2: ahci
[ 2.110680] scsi host3: ahci
[ 2.110719] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 2.110721] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 2.110723] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 2.110726] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 2.116418] scsi host4: pata_atiixp
[ 2.116490] scsi host5: pata_atiixp
[ 2.116523] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 2.116525] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.131222] [drm] radeon kernel modesetting enabled.
[ 2.134130] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 2.134133] AMD IOMMUv2 functionality not available on this system
[ 2.136817] CRAT table not found
[ 2.136820] Finished initializing topology ret=0
[ 2.136885] kfd kfd: Initialized module
[ 2.137170] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[ 2.137172] fb: switching to radeondrmfb from VESA VGA
[ 2.137206] Console: switching to colour dummy device 80x25
[ 2.137576] [drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x1458:0x2556).
[ 2.137587] [drm] register mmio base: 0xFDF80000
[ 2.137588] [drm] register mmio size: 262144
[ 2.137879] ATOM BIOS: GV
[ 2.138021] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 2.138023] radeon 0000:01:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[ 2.138025] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 2.138026] [drm] RAM width 128bits DDR
[ 2.138094] [TTM] Zone kernel: Available graphics memory: 2022344 kiB
[ 2.138095] [TTM] Initializing pool allocator
[ 2.138100] [TTM] Initializing DMA pool allocator
[ 2.138119] [drm] radeon: 1024M of VRAM memory ready
[ 2.138120] [drm] radeon: 2048M of GTT memory ready.
[ 2.138131] [drm] Loading verde Microcode
[ 2.138254] [drm] Internal thermal controller with fan control
[ 2.138354] [drm] probing gen 2 caps for device 1022:9603 = 300d02/0
[ 2.145254] [drm] radeon: dpm initialized
[ 2.146112] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 2.146121] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 2.148620] [drm] probing gen 2 caps for device 1022:9603 = 300d02/0
[ 2.148625] [drm] PCIE gen 2 link speeds already enabled
[ 2.157549] [drm] PCIE GART of 2048M enabled (table at 0x00000000002E8000).
[ 2.157664] radeon 0000:01:00.0: WB enabled
[ 2.157667] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800cef56c00
[ 2.157669] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8800cef56c04
[ 2.157670] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8800cef56c08
[ 2.157672] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800cef56c0c
[ 2.157674] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff8800cef56c10
[ 2.158160] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001435a18
[ 2.174432] firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 2.178155] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff8800cef56c18
[ 2.178157] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff8800cef56c1c
[ 2.178186] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.178187] [drm] Driver supports precise vblank timestamp query.
[ 2.178188] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 2.178215] radeon 0000:01:00.0: radeon: using MSI.
[ 2.178240] [drm] radeon: irq initialized.
[ 2.262509] usb 3-3: new full-speed USB device number 2 using ohci-pci
[ 2.278520] usb 1-1.4: new low-speed USB device number 5 using ehci-pci
[ 2.381151] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c045
[ 2.381155] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.381157] usb 1-1.4: Product: USB-PS/2 Optical Mouse
[ 2.381159] usb 1-1.4: Manufacturer: Logitech
[ 2.430753] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.466772] usb 4-2: new low-speed USB device number 2 using ohci-pci
[ 2.514359] tsc: Refined TSC clocksource calibration: 3214.217 MHz
[ 2.514362] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e54c07cee2, max_idle_ns: 440795355995 ns
[ 2.602955] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.602988] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.603015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.604170] ata1.00: ATA-8: ST3500413AS, JC45, max UDMA/133
[ 2.604174] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.605399] ata2.00: ATAPI: ATAPI iHAS122, ZL0A, max UDMA/100
[ 2.605544] ata1.00: configured for UDMA/133
[ 2.605735] scsi 0:0:0:0: Direct-Access ATA ST3500413AS JC45 PQ: 0 ANSI: 5
[ 2.606061] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.606092] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.606103] sd 0:0:0:0: [sda] Write Protect is off
[ 2.606105] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.606121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.606202] ata2.00: configured for UDMA/100
[ 2.608150] scsi 1:0:0:0: CD-ROM ATAPI iHAS122 ZL0A PQ: 0 ANSI: 5
[ 2.627833] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.627837] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.627996] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.628049] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.638811] sda: sda1 sda2 < sda5 >
[ 2.639172] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.641285] ata3.00: ATA-7: ST3500830AS, 3.AAD, max UDMA/133
[ 2.641288] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.675160] firewire_core 0000:03:0e.0: created device fw0: GUID 0019ab92001c6f65, S400
[ 2.685105] [drm] ring test on 0 succeeded in 1 usecs
[ 2.685112] [drm] ring test on 1 succeeded in 1 usecs
[ 2.685117] [drm] ring test on 2 succeeded in 1 usecs
[ 2.685131] [drm] ring test on 3 succeeded in 9 usecs
[ 2.685137] [drm] ring test on 4 succeeded in 3 usecs
[ 2.693113] usb 3-3: New USB device found, idVendor=06bd, idProduct=0001
[ 2.693117] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.693119] usb 3-3: Product: SNAPSCAN 1212U
[ 2.693121] usb 3-3: Manufacturer: AGFA
[ 2.699651] ata3.00: configured for UDMA/133
[ 2.701913] scsi 2:0:0:0: Direct-Access ATA ST3500830AS D PQ: 0 ANSI: 5
[ 2.702151] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.702213] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.702251] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.702253] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.702270] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.739428] sdb: sdb1
[ 2.739677] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.770209] usb 4-2: New USB device found, idVendor=056a, idProduct=0011
[ 2.770214] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.770216] usb 4-2: Product: ET-0405A-UV2.0-1
[ 2.770217] usb 4-2: Manufacturer: WACOM
[ 2.775332] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.784440] usbcore: registered new interface driver usbhid
[ 2.784443] usbhid: USB HID core driver
[ 2.787222] input: Wacom Graphire2 4x5 Pen as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/0003:056A:0011.0002/input/input3
[ 2.787521] wacom 0003:056A:0011.0002: hidraw0: USB HID v1.00 Mouse [WACOM ET-0405A-UV2.0-1] on usb-0000:00:12.1-2/input0
[ 2.861165] [drm] ring test on 5 succeeded in 1 usecs
[ 2.861174] [drm] UVD initialized successfully.
[ 2.970573] [drm] ring test on 6 succeeded in 20 usecs
[ 2.970588] [drm] ring test on 7 succeeded in 3 usecs
[ 2.970589] [drm] VCE initialized successfully.
[ 2.970729] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.970765] [drm] ib test on ring 1 succeeded in 0 usecs
[ 2.970798] [drm] ib test on ring 2 succeeded in 0 usecs
[ 2.970840] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.970883] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2.990415] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C045.0001/input/input6
[ 2.990517] hid-generic 0003:046D:C045.0001: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.2-1.4/input0
[ 3.135678] usb 4-3: new low-speed USB device number 3 using ohci-pci
[ 3.323945] usb 4-3: New USB device found, idVendor=046d, idProduct=c30e
[ 3.323949] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.323951] usb 4-3: Product: HID compliant keyboard
[ 3.323952] usb 4-3: Manufacturer: Logitech
[ 3.340236] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/0003:046D:C30E.0003/input/input7
[ 3.396200] hid-generic 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:12.1-3/input0
[ 3.418140] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/0003:046D:C30E.0004/input/input8
[ 3.472266] hid-generic 0003:046D:C30E.0004: input,hidraw3: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:12.1-3/input1
[ 3.512274] clocksource: Switched to clocksource tsc
[ 3.620332] [drm] ib test on ring 5 succeeded
[ 4.120980] [drm] ib test on ring 6 succeeded
[ 4.621631] [drm] ib test on ring 7 succeeded
[ 4.622891] [drm] Radeon Display Connectors
[ 4.622894] [drm] Connector 0:
[ 4.622895] [drm] DP-1
[ 4.622896] [drm] HPD2
[ 4.622898] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 4.622899] [drm] Encoders:
[ 4.622900] [drm] DFP1: INTERNAL_UNIPHY2
[ 4.622901] [drm] Connector 1:
[ 4.622901] [drm] DP-2
[ 4.622902] [drm] HPD3
[ 4.622903] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 4.622904] [drm] Encoders:
[ 4.622905] [drm] DFP2: INTERNAL_UNIPHY2
[ 4.622906] [drm] Connector 2:
[ 4.622906] [drm] HDMI-A-1
[ 4.622907] [drm] HPD1
[ 4.622908] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 4.622909] [drm] Encoders:
[ 4.622910] [drm] DFP3: INTERNAL_UNIPHY1
[ 4.622910] [drm] Connector 3:
[ 4.622911] [drm] DVI-I-1
[ 4.622912] [drm] HPD4
[ 4.622913] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 4.622914] [drm] Encoders:
[ 4.622914] [drm] DFP4: INTERNAL_UNIPHY
[ 4.622915] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.683761] [drm] fb mappable at 0xD06EB000
[ 4.683764] [drm] vram apper at 0xD0000000
[ 4.683765] [drm] size 8294400
[ 4.683766] [drm] fb depth is 24
[ 4.683767] [drm] pitch is 7680
[ 4.683868] fbcon: radeondrmfb (fb0) is primary device
[ 4.683952] Console: switching to colour frame buffer device 240x67
[ 4.683981] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 4.683982] radeon 0000:01:00.0: registered panic notifier
[ 4.689747] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 5.114255] floppy0: no floppy controllers found
[ 5.348195] random: nonblocking pool is initialized
[ 5.366849] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.220232] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 6.557417] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 6.712777] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 6.712935] systemd[1]: Detected architecture x86-64.
[ 6.729534] systemd[1]: Set hostname to <conurb>.
[ 8.561698] systemd[1]: Reached target Remote File Systems (Pre).
[ 8.561800] systemd[1]: Created slice Root Slice.
[ 8.561884] systemd[1]: Listening on Journal Audit Socket.
[ 8.561920] systemd[1]: Listening on udev Control Socket.
[ 8.561933] systemd[1]: Reached target Encrypted Volumes.
[ 8.561952] systemd[1]: Listening on udev Kernel Socket.
[ 8.561981] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.562021] systemd[1]: Listening on Journal Socket.
[ 8.562114] systemd[1]: Created slice System Slice.
[ 8.562651] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.563578] systemd[1]: Started Read required files in advance.
[ 8.564858] systemd[1]: Starting Setup Virtual Console...
[ 8.565723] systemd[1]: Started Braille Device Support.
[ 8.566634] systemd[1]: Mounting Debug File System...
[ 8.567559] systemd[1]: Starting Increase datagram queue length...
[ 8.568487] systemd[1]: Starting Uncomplicated firewall...
[ 8.569407] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 8.570299] systemd[1]: Mounting Huge Pages File System...
[ 8.570520] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.831105] systemd[1]: Created slice User and Session Slice.
[ 8.831122] systemd[1]: Reached target Slices.
[ 8.831134] systemd[1]: Reached target User and Group Name Lookups.
[ 8.831188] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.967107] systemd[1]: Starting Load Kernel Modules...
[ 8.968040] systemd[1]: Starting udev Coldplug all Devices...
[ 8.968125] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.968323] systemd[1]: Created slice system-getty.slice.
[ 8.968394] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.969230] systemd[1]: Mounted Debug File System.
[ 8.969269] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.969285] systemd[1]: Mounted Huge Pages File System.
[ 8.969560] systemd[1]: Started Setup Virtual Console.
[ 8.969845] systemd[1]: Started Increase datagram queue length.
[ 8.970013] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 8.977370] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.977441] systemd[1]: Listening on Syslog Socket.
[ 8.978318] systemd[1]: Starting Journal Service...
[ 9.080127] systemd[1]: Started Uncomplicated firewall.
[ 9.349100] systemd[1]: Started udev Coldplug all Devices.
[ 9.620765] systemd[1]: Started Journal Service.
[ 9.832862] lp: driver loaded but no devices found
[ 9.843081] ppdev: user-space parallel port driver
[ 10.701465] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.026804] systemd-journald[246]: Received request to flush runtime journal from PID 1
[ 11.670776] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.679787] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20150619/utaddress-254)
[ 11.679794] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.957720] MCE: In-kernel MCE decoding enabled.
[ 11.999071] EDAC MC: Ver: 3.0.0
[ 12.047375] AMD64 EDAC driver v3.4.0
[ 12.047408] EDAC amd64: DRAM ECC disabled.
[ 12.047423] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 12.522211] kvm: Nested Virtualization enabled
[ 12.522215] kvm: Nested Paging enabled
[ 12.893751] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 12.893756] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 12.902947] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
[ 12.903006] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 12.903062] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[ 12.903114] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 12.903166] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 12.903230] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 13.032893] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 13.032898] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.032909] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 13.032910] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 13.032912] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 13.032913] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 13.032915] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 13.032917] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 13.032918] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 13.032919] snd_hda_codec_realtek hdaudioC0D0: dig-in=0x1f
[ 13.050541] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 13.050631] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 13.050700] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[ 13.050747] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
[ 13.050822] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[ 13.050872] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
[ 13.050940] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
[ 13.050988] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input22
[ 13.922486] Adding 4190204k swap on /dev/sda5. Priority:-1 extents:1 across:4190204k FS
[ 14.473373] audit: type=1400 audit(1448100068.906:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=664 comm="apparmor_parser"
[ 14.473381] audit: type=1400 audit(1448100068.906:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=664 comm="apparmor_parser"
[ 14.528212] audit: type=1400 audit(1448100068.958:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=664 comm="apparmor_parser"
[ 14.528222] audit: type=1400 audit(1448100068.958:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=664 comm="apparmor_parser"
[ 14.528226] audit: type=1400 audit(1448100068.958:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=664 comm="apparmor_parser"
[ 14.528230] audit: type=1400 audit(1448100068.958:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=664 comm="apparmor_parser"
[ 14.659074] audit: type=1400 audit(1448100069.090:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=664 comm="apparmor_parser"
[ 14.659086] audit: type=1400 audit(1448100069.090:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=664 comm="apparmor_parser"
[ 14.659091] audit: type=1400 audit(1448100069.090:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="pxgsettings" pid=664 comm="apparmor_parser"
[ 14.659095] audit: type=1400 audit(1448100069.090:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=664 comm="apparmor_parser"
[ 14.798884] floppy0: no floppy controllers found
[ 25.919571] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.241433] r8169 0000:02:00.0 eth0: link down
[ 26.241461] r8169 0000:02:00.0 eth0: link down
[ 26.241627] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.837342] r8169 0000:02:00.0 eth0: link up
[ 27.837366] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 34.052788] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 34.061458] vboxdrv: Found 3 processor cores
[ 34.080251] vboxdrv: TSC mode is Invariant, tentative frequency 3214242448 Hz
[ 34.080255] vboxdrv: Successfully loaded version 5.0.4_Ubuntu (interface 0x00240000)
[ 34.203101] VBoxNetFlt: Successfully started.
[ 34.213896] VBoxNetAdp: Successfully started.
[ 34.222550] VBoxPciLinuxInit
[ 34.249787] vboxpci: IOMMU not found (not registered)
[ 46.253655] Non-volatile memory driver v1.3Pour info, il me semble que le problème arrive aussi à un copain depuis la même période et il a une config complètement différente. Je pensais que c'était un problème assez répandu, qui arrivait plus ou moins à tout le monde depuis Ubuntu 14.04 ou 14.10.
EDIT : je me suis demandé si ça avait un rapport avec le passage d'Upstart à Systemd mais ça s'est fait seulement en 15.04, non ?
EDIT 2 : et je précise aussi que j'avais fait un test en essayant Plymouth en mode texte et ça passait. C'est à priori seulement Plymouth en version graphique qui veut afficher des résolutions non gérées par mon moniteur.
Dernière modification par abelthorne (Le 21/11/2015, à 13:10)
Hors ligne
#6 Le 22/11/2015, à 19:21
- ratm54
Re : Pas d'affichage durant le boot
sudo apt-get update
sudo apt-get install -f
sudo dpkg --configure -a
sudo dpkg-reconfigure plymouthHors ligne
#7 Le 22/11/2015, à 19:53
- moko138
Re : Pas d'affichage durant le boot
dmesg a écrit :
[ 2.137206] Console: switching to colour dummy device 80x25]
[ 4.683982] radeon 0000:01:00.0: registered panic notifier
Que donne la manip' de ratm54 ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#8 Le 22/11/2015, à 22:25
- abelthorne
Re : Pas d'affichage durant le boot
Pas de changement notable.
Hors ligne
#9 Le 22/11/2015, à 22:31
- f.x0
Re : Pas d'affichage durant le boot
Bonjour abelthorne,
postes le retour de
cat /boot/grub/grub.cfgSOPI
Hors ligne
#10 Le 22/11/2015, à 22:35
- f.x0
Re : Pas d'affichage durant le boot
et de
cat /etc/default/grubSOPI
Hors ligne
#11 Le 23/11/2015, à 01:12
- abelthorne
Re : Pas d'affichage durant le boot
grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 e749d1e7-b4de-44a6-b3d5-0c1af5e34242
else
search --no-floppy --fs-uuid --set=root e749d1e7-b4de-44a6-b3d5-0c1af5e34242
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 60,59,55; then
clear
fi
color_normal=light-gray/black
if [ -e ${prefix}/themes/ubuntu-mate/theme.txt ]; then
insmod png
theme=${prefix}/themes/ubuntu-mate/theme.txt
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-e749d1e7-b4de-44a6-b3d5-0c1af5e34242' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 e749d1e7-b4de-44a6-b3d5-0c1af5e34242
else
search --no-floppy --fs-uuid --set=root e749d1e7-b4de-44a6-b3d5-0c1af5e34242
fi
linux /boot/vmlinuz-4.2.0-18-generic root=UUID=e749d1e7-b4de-44a6-b3d5-0c1af5e34242 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.2.0-18-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-e749d1e7-b4de-44a6-b3d5-0c1af5e34242' {
menuentry 'Ubuntu, avec Linux 4.2.0-18-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.2.0-18-generic-advanced-e749d1e7-b4de-44a6-b3d5-0c1af5e34242' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 e749d1e7-b4de-44a6-b3d5-0c1af5e34242
else
search --no-floppy --fs-uuid --set=root e749d1e7-b4de-44a6-b3d5-0c1af5e34242
fi
echo 'Chargement de Linux 4.2.0-18-generic…'
linux /boot/vmlinuz-4.2.0-18-generic root=UUID=e749d1e7-b4de-44a6-b3d5-0c1af5e34242 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.2.0-18-generic
}
menuentry 'Ubuntu, with Linux 4.2.0-18-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.2.0-18-generic-init-upstart-e749d1e7-b4de-44a6-b3d5-0c1af5e34242' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 e749d1e7-b4de-44a6-b3d5-0c1af5e34242
else
search --no-floppy --fs-uuid --set=root e749d1e7-b4de-44a6-b3d5-0c1af5e34242
fi
echo 'Chargement de Linux 4.2.0-18-generic…'
linux /boot/vmlinuz-4.2.0-18-generic root=UUID=e749d1e7-b4de-44a6-b3d5-0c1af5e34242 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.2.0-18-generic
}
menuentry 'Ubuntu, with Linux 4.2.0-18-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.2.0-18-generic-recovery-e749d1e7-b4de-44a6-b3d5-0c1af5e34242' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 e749d1e7-b4de-44a6-b3d5-0c1af5e34242
else
search --no-floppy --fs-uuid --set=root e749d1e7-b4de-44a6-b3d5-0c1af5e34242
fi
echo 'Chargement de Linux 4.2.0-18-generic…'
linux /boot/vmlinuz-4.2.0-18-generic root=UUID=e749d1e7-b4de-44a6-b3d5-0c1af5e34242 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.2.0-18-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 e749d1e7-b4de-44a6-b3d5-0c1af5e34242
else
search --no-floppy --fs-uuid --set=root e749d1e7-b4de-44a6-b3d5-0c1af5e34242
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 e749d1e7-b4de-44a6-b3d5-0c1af5e34242
else
search --no-floppy --fs-uuid --set=root e749d1e7-b4de-44a6-b3d5-0c1af5e34242
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (sur /dev/sdb1)' --class windows --class os $menuentry_id_option 'osprober-chain-BAC60C01C60BBC9F' {
insmod part_msdos
insmod ntfs
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 BAC60C01C60BBC9F
else
search --no-floppy --fs-uuid --set=root BAC60C01C60BBC9F
fi
parttool ${root} hidden-
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###/etc/defaut/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"Hors ligne
#12 Le 23/11/2015, à 01:30
- f.x0
Re : Pas d'affichage durant le boot
tu pourrais essayer de
sauvegarder ton fichier /boot/grub/grub.cfg
sudo cp /boot/grub/grub.cfg /boot/grub/grub.cfg.soschanger dans /boot/grub/grub.cfg
cette ligne
set gfxmode=autocomme ceci (en mettant la résolution de ton écran)
set gfxmode=1280x1024et ces lignes
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fipar ces lignes
function gfxmode {
set gfxpayload="$1"
if [ "$1" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
set linux_gfx_mode=1280x1024
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fiensuite sauvegarder ton fichier /etc/default/grub
sudo cp /etc/default/grub /etc/default/grub.soschanger dans /etc/default/grub
cette ligne
#GRUB_GFXMODE=640x480par ces lignes
GRUB_GFXMODE="1280x1024"
GRUB_GFXPAYLOAD_LINUX="1280x1024"un petit :
sudo update-grubpuis un redémarrage → ça donne quoi ???
SOPI
Hors ligne
#13 Le 23/11/2015, à 11:35
- abelthorne
Re : Pas d'affichage durant le boot
C'est pas plus ou ce qu'était censé faire la première méthode que j'ai testée ?
Hors ligne
#14 Le 23/11/2015, à 18:37
- f.x0
Re : Pas d'affichage durant le boot
Ça y ressemble furieusement !!!
sauf que le fichier modifié chez moi est également /boot/grub/grub.cfg
et que je n'ai pas de fichier /etc/grub.d/00_header
je suis sous Mint 17.2, et les lignes données sont celles de mon /boot/grub/grub.cfg
et de mon /etc/default/grub
tu peux essayer avec grub-customizer
SOPI
Hors ligne
#15 Le 23/11/2015, à 21:27
- abelthorne
Re : Pas d'affichage durant le boot
Le 00_header, ça sert surtout à faire des modifs sans toucher aux fichiers de config de base. Mais je ne sais pas trop si celles que j'ai testées sont complètement couvertes par ce que tu proposes ou s'il y a des options en plus. Et surtout, je voudrais éviter de faire n'importe quoi au pif quand il s'agit de modifier Grub : si c'est pour me retrouver avec un système qui ne démarre plus sur mon PC de travail, ça va pas être la fête.
Hors ligne
#16 Le 23/11/2015, à 22:33
- f.x0
Re : Pas d'affichage durant le boot
Je suis bien d'accord, c'est pour cette raison que je te recommandai
de faire une copies de fichiers avant modifs.
Mais il te faudrai un LiveDVD ou Live USB au cas où ...
Essaies avec grub-customizer, cela se fait sans souci (dans apparence)
SOPI
Hors ligne