Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1 2

#1 Le 22/11/2015, à 19:46

Chester

Problème installation Ubuntu 14.04

Bonjour à tous,
Je ne sais pas comment intituler ce fil car je suis incapable d'identifier le problème.

J'essaie d'installer Ubuntu sur l'ordi portable d'un ami, mais je rencontre beaucoup de difficultés. L'ordinateur semblait cassé. Il a cessé brutalement de fonctionner du jour au lendemain et lors du démarrage, après qu'apparaissait le logo de la marque (ACER), l'ordinateur cessait 9 fois sur 10 de fonctionner (il s'éteignait automatiquement). S'il ne s'éteignait pas, il restait sur un écran noir sans que Windows ne se lance. J'ai tout de même réussi, je ne sais pas trop comment, à lancer Ubuntu en live avec une clé usb. Mais impossible de l'installer. Le disque dur semblait cassé. J'ai donc changé le disque. Après de multiples essais, j'ai finalement réussi à installer Ubuntu sur le nouveau disque.

Désormais, la situation n'est guère plus encourageante. Neuf fois sur 10, l'ordinateur continue de s'éteindre brutalement après avoir été allumé au bout de cinq à dix secondes, avant même qu'ubuntu ne se charge. Lorsqu'il ne s'éteint pas, après Intel Undi, je vois apparaître la phrase : Client Mac ADDR suivi d'un nombre, puis GUID également suivi d'un nombre. Ensuite, le curseur clignote et tourne sur lui-même. Ensuite, Ubuntu ne semble pas se lancer correctement. J'ai bien un écran violet, mais rien ne se passe...

A un moment, j'ai pu voir écrit : "Proble failed" ou quelque chose comme ça.

J'ai tout de même réussi une fois à lancer Ubuntu. Je lui ai fait faire les mises à jour, mais impossible de le relancer depuis.

Je ne suis pas très précis. Une idée du problème ?

Merci pour votre aide.

Dernière modification par Chester (Le 22/11/2015, à 19:47)

Hors ligne

#2 Le 22/11/2015, à 20:24

ratm54

Re : Problème installation Ubuntu 14.04

que te retournes :

sudo dmesg

Hors ligne

#3 Le 22/11/2015, à 20:58

Chester

Re : Problème installation Ubuntu 14.04

Merci pour ton aide.

Une petite précision : Au démarrage, j'ai vu un message indiquant PXE-MOE je ne sais plus trop quoi... Ensuite, j'ai eu un message de ce type 0.918150 APCI PCC probe failed. Et ensuite, j'ai eu le menu du GRUB. Je ne sais pas pourquoi. J'avais le choix entre Ubuntu, ou options avancées ou autre chose...

Je me demande s'il n'y a pas un problème de surchauffe car le ventilateur tourne toujours à fond les manivelles et lorsque j'essaie de le redémarrer après qu'il a tourné pendant un certain temps, il se coupe automatiquement au démarre et impossible de le redémarrer. Il faut que j'attende au moins dix minutes. Là, je viens de réussir à le redémarrer et Ubuntu semble correctement fonctionner (à ceci près que je n'arrive pas à avoir Ubuntu en français, malgré le fait que j'ai téléchargé les langues).

Voici ce qu'affiche :

sudo dmesg
[    0.191098] system 00:07: [mem 0xfc000000-0xfdffffff] has been reserved
[    0.191101] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.191367] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.191370] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.191373] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.191375] system 00:08: [mem 0x00100000-0xdfffffff] could not be reserved
[    0.191378] system 00:08: [mem 0xfc000000-0xffffffff] could not be reserved
[    0.191382] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.192158] pnp: PnP ACPI: found 9 devices
[    0.199616] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.199628] pci 0000:00:0c.0: PCI bridge to [bus 02]
[    0.199634] pci 0000:00:0c.0:   bridge window [io  0xd000-0xdfff]
[    0.199645] pci 0000:00:0c.0:   bridge window [mem 0xfaf00000-0xfbffffff]
[    0.199653] pci 0000:00:0c.0:   bridge window [mem 0xe0000000-0xf7ffffff 64bit pref]
[    0.199671] pci 0000:03:00.0: BAR 6: assigned [mem 0xfea00000-0xfea0ffff pref]
[    0.199674] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.199679] pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
[    0.199690] pci 0000:00:15.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.199698] pci 0000:00:15.0:   bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref]
[    0.199711] pci 0000:00:16.0: PCI bridge to [bus 04]
[    0.199722] pci 0000:00:16.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.199742] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.199744] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.199747] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.199749] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.199751] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfbffffff]
[    0.199753] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]
[    0.199756] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.199758] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.199760] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.199762] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[    0.199765] pci_bus 0000:01: resource 8 [mem 0xe0000000-0xfbffffff]
[    0.199767] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff]
[    0.199769] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.199771] pci_bus 0000:02: resource 1 [mem 0xfaf00000-0xfbffffff]
[    0.199774] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf7ffffff 64bit pref]
[    0.199776] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.199778] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.199781] pci_bus 0000:03: resource 2 [mem 0xf9f00000-0xf9ffffff 64bit pref]
[    0.199783] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.199820] NET: Registered protocol family 2
[    0.200094] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.200248] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.200452] TCP: Hash tables configured (established 32768 bind 32768)
[    0.200519] TCP: reno registered
[    0.200534] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.200577] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.200725] NET: Registered protocol family 1
[    0.201087] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.272287] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.272558] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[    0.344275] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
[    0.344497] pci 0000:02:00.0: Video device with shadowed ROM
[    0.344523] PCI: CLS 64 bytes, default 64
[    0.344621] Trying to unpack rootfs image as initramfs...
[    0.739756] Freeing initrd memory: 19344K (ffff880035a28000 - ffff880036d0c000)
[    0.739814] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.739817] software IO TLB [mem 0xdbfa8000-0xdffa8000] (64MB) mapped at [ffff8800dbfa8000-ffff8800dffa7fff]
[    0.739877] Simple Boot Flag at 0xef set to 0x1
[    0.740150] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[    0.740160] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[    0.740260] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.740297] Scanning for low memory corruption every 60 seconds
[    0.740708] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.740751] Initialise system trusted keyring
[    0.740786] audit: initializing netlink subsys (disabled)
[    0.740813] audit: type=2000 audit(1448218279.740:1): initialized
[    0.741273] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.743613] zpool: loaded
[    0.743617] zbud: loaded
[    0.743810] VFS: Disk quotas dquot_6.5.2
[    0.743867] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.744605] fuse init (API version 7.23)
[    0.744814] Key type big_key registered
[    0.745288] Key type asymmetric registered
[    0.745292] Asymmetric key parser 'x509' registered
[    0.745352] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.745403] io scheduler noop registered
[    0.745407] io scheduler deadline registered (default)
[    0.745455] io scheduler cfq registered
[    0.745847] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[    0.746195] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[    0.746524] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[    0.746675] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.746700] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.746761] intel_idle: does not run on family 6 model 23
[    0.746923] ACPI: AC Adapter [AC0] (on-line)
[    0.747101] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.747107] ACPI: Power Button [PWRB]
[    0.747161] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.747164] ACPI: Sleep Button [SLPB]
[    0.747222] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.748605] ACPI: Lid Switch [LID]
[    0.748672] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.748676] ACPI: Power Button [PWRF]
[    0.749438] Monitor-Mwait will be used to enter C-1 state
[    0.749453] Monitor-Mwait will be used to enter C-2 state
[    0.749467] Monitor-Mwait will be used to enter C-3 state
[    0.749479] tsc: Marking TSC unstable due to TSC halts in idle
[    0.749495] ACPI: acpi_idle registered with cpuidle
[    0.758244] thermal LNXTHERM:00: registered as thermal_zone0
[    0.758247] ACPI: Thermal Zone [THRM] (75 C)
[    0.758312] GHES: HEST is not enabled!
[    0.758494] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.762895] Linux agpgart interface v0.103
[    0.765571] brd: module loaded
[    0.767290] loop: module loaded
[    0.767802] libphy: Fixed MDIO Bus: probed
[    0.767806] tun: Universal TUN/TAP device driver, 1.6
[    0.767808] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.767958] PPP generic driver version 2.4.2
[    0.768102] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.768110] ehci-pci: EHCI PCI platform driver
[    0.768258] ehci-pci 0000:00:04.1: EHCI Host Controller
[    0.768267] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[    0.768279] ehci-pci 0000:00:04.1: debug port 1
[    0.768312] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[    0.768338] ehci-pci 0000:00:04.1: irq 22, io mem 0xfae7ec00
[    0.780051] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    0.780156] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.780162] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.780166] usb usb1: Product: EHCI Host Controller
[    0.780170] usb usb1: Manufacturer: Linux 3.19.0-33-generic ehci_hcd
[    0.780174] usb usb1: SerialNumber: 0000:00:04.1
[    0.780421] hub 1-0:1.0: USB hub found
[    0.780430] hub 1-0:1.0: 11 ports detected
[    0.782578] ehci-pci 0000:00:06.1: EHCI Host Controller
[    0.782587] ehci-pci 0000:00:06.1: new USB bus registered, assigned bus number 2
[    0.782603] ehci-pci 0000:00:06.1: debug port 1
[    0.782638] ehci-pci 0000:00:06.1: cache line size of 64 is not supported
[    0.782659] ehci-pci 0000:00:06.1: irq 20, io mem 0xfae7e800
[    0.792057] ehci-pci 0000:00:06.1: USB 2.0 started, EHCI 1.00
[    0.792144] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.792149] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.792153] usb usb2: Product: EHCI Host Controller
[    0.792158] usb usb2: Manufacturer: Linux 3.19.0-33-generic ehci_hcd
[    0.792162] usb usb2: SerialNumber: 0000:00:06.1
[    0.792389] hub 2-0:1.0: USB hub found
[    0.792397] hub 2-0:1.0: 1 port detected
[    0.792661] ehci-platform: EHCI generic platform driver
[    0.792685] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.792694] ohci-pci: OHCI PCI platform driver
[    0.792792] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    0.792801] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 3
[    0.792837] ohci-pci 0000:00:04.0: irq 23, io mem 0xfae7f000
[    0.795543] ACPI: Battery Slot [BAT0] (battery present)
[    0.850091] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.850094] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.850097] usb usb3: Product: OHCI PCI host controller
[    0.850099] usb usb3: Manufacturer: Linux 3.19.0-33-generic ohci_hcd
[    0.850101] usb usb3: SerialNumber: 0000:00:04.0
[    0.850289] hub 3-0:1.0: USB hub found
[    0.850300] hub 3-0:1.0: 11 ports detected
[    0.852211] ohci-pci 0000:00:06.0: OHCI PCI host controller
[    0.852220] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 4
[    0.852257] ohci-pci 0000:00:06.0: irq 21, io mem 0xfae7d000
[    0.910069] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.910072] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.910074] usb usb4: Product: OHCI PCI host controller
[    0.910077] usb usb4: Manufacturer: Linux 3.19.0-33-generic ohci_hcd
[    0.910079] usb usb4: SerialNumber: 0000:00:06.0
[    0.910252] hub 4-0:1.0: USB hub found
[    0.910262] hub 4-0:1.0: 1 port detected
[    0.910528] ohci-platform: OHCI generic platform driver
[    0.910550] uhci_hcd: USB Universal Host Controller Interface driver
[    0.910645] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.914384] i8042: Detected active multiplexing controller, rev 1.1
[    0.916639] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.916645] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.916687] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.916720] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.916750] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.916965] mousedev: PS/2 mouse device common for all mice
[    0.917322] rtc_cmos 00:03: RTC can wake from S4
[    0.917603] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.917655] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    0.917666] i2c /dev entries driver
[    0.917764] device-mapper: uevent: version 1.0.3
[    0.917875] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[    0.917898] ledtrig-cpu: registered to indicate activity on CPUs
[    0.918148] PCCT header not found.
[    0.918150] ACPI PCC probe failed.
[    0.918341] TCP: cubic registered
[    0.918499] NET: Registered protocol family 10
[    0.918803] NET: Registered protocol family 17
[    0.918818] Key type dns_resolver registered
[    0.919259] Loading compiled-in X.509 certificates
[    0.920491] Loaded X.509 cert 'Magrathea: Glacier signing key: 4bb43fbaf12fd3a0265773e00e22f4399f634b16'
[    0.920526] registered taskstats version 1
[    0.923265] Key type trusted registered
[    0.928261] Key type encrypted registered
[    0.928278] AppArmor: AppArmor sha1 policy hashing enabled
[    0.928284] ima: No TPM chip found, activating TPM-bypass!
[    0.928316] evm: HMAC attrs: 0x1
[    0.928905]   Magic number: 7:932:898
[    0.929114] rtc_cmos 00:03: setting system clock to 2015-11-22 18:51:20 UTC (1448218280)
[    0.930044] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.930046] EDD information not available.
[    0.930140] PM: Hibernation image not present or could not be loaded.
[    0.930907] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[    0.930915] Write protecting the kernel read-only data: 12288k
[    0.931327] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[    0.931597] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
[    0.949002] systemd-udevd[102]: starting version 204
[    0.958534] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.009228] ahci 0000:00:0b.0: version 3.0
[    1.009524] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[    1.009671] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[    1.009675] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs 
[    1.010709] scsi host0: ahci
[    1.010845] scsi host1: ahci
[    1.010950] scsi host2: ahci
[    1.011055] scsi host3: ahci
[    1.011159] scsi host4: ahci
[    1.011260] scsi host5: ahci
[    1.011329] ata1: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76100 irq 24
[    1.011332] ata2: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76180 irq 24
[    1.011334] ata3: DUMMY
[    1.011336] ata4: DUMMY
[    1.011337] ata5: DUMMY
[    1.011338] ata6: DUMMY
[    1.019988] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.020034] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.020587] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[    1.021000] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90002750000, 48:5b:39:3a:03:69, XID 083000c0 IRQ 25
[    1.021004] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.092068] usb 1-7: new high-speed USB device number 2 using ehci-pci
[    1.301767] usb 1-7: New USB device found, idVendor=174f, idProduct=1120
[    1.301773] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.301778] usb 1-7: Product: USB Video Device
[    1.301782] usb 1-7: Manufacturer: D-MAX
[    1.328073] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.330395] ata2.00: ATAPI: Slimtype DVD A  DS8A4S, JA22, max UDMA/100
[    1.331695] ata2.00: configured for UDMA/100
[    1.332026] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.333279] ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA50A, max UDMA/100
[    1.333284] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.334670] ata1.00: configured for UDMA/100
[    1.334793] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54755 A50A PQ: 0 ANSI: 5
[    1.335169] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.335204] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.335207] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.335330] sd 0:0:0:0: [sda] Write Protect is off
[    1.335334] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.335396] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.339046] scsi 1:0:0:0: CD-ROM            Slimtype DVD A  DS8A4S    JA22 PQ: 0 ANSI: 5
[    1.365635] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.365642] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.365861] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.365970] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.644108]  sda: sda1 sda2 < sda5 sda6 >
[    1.644688] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.040871] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[    2.076277] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[    2.089316] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.210338] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12
[    2.711133] random: init urandom read with 97 bits of entropy available
[    3.119391] init: plymouth-upstart-bridge main process (175) terminated with status 1
[    3.119409] init: plymouth-upstart-bridge main process ended, respawning
[    3.123829] init: plymouth-upstart-bridge main process (186) terminated with status 1
[    3.123848] init: plymouth-upstart-bridge main process ended, respawning
[    3.127517] init: plymouth-upstart-bridge main process (189) terminated with status 1
[    3.127537] init: plymouth-upstart-bridge main process ended, respawning
[    3.278255] random: nonblocking pool is initialized
[   12.007519] Adding 5858300k swap on /dev/sda5.  Priority:-1 extents:1 across:5858300k FS
[   12.220267] systemd-udevd[293]: starting version 204
[   12.299367] lp: driver loaded but no devices found
[   12.308179] ppdev: user-space parallel port driver
[   12.358680] asus_laptop: Asus Laptop Support version 0.42
[   12.358817] asus_laptop: BSTS called, 0xff5f returned
[   12.358831] asus_laptop:   K50ID model detected
[   12.359502] asus_laptop: Backlight controlled by ACPI video driver
[   12.359672] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input13
[   12.382696] wmi: Mapper loaded
[   12.405493] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   12.418478] acpi device:0b: registered as cooling_device2
[   12.418640] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:08/LNXVIDEO:00/input/input14
[   12.493432] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[   12.493440] ACPI Warning: SystemIO range 0x0000000000004e00-0x0000000000004e3f conflicts with OpRegion 0x0000000000004e00-0x0000000000004e3f (\_SB_.PCI0.SM00) (20141107/utaddress-258)
[   12.493447] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.567145] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.601569] [drm] Initialized drm 1.1.0 20060810
[   12.645476] MXM: GUID detected in BIOS
[   12.645582] ACPI Warning: \_SB_.PCI0.XVR0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[   12.645631] ACPI: \_SB_.PCI0.XVR0.VGA_: failed to evaluate _DSM
[   12.647541] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 18
[   12.650695] nouveau  [  DEVICE][0000:02:00.0] BOOT0  : 0x0a5680a2
[   12.650703] nouveau  [  DEVICE][0000:02:00.0] Chipset: GT216 (NVA5)
[   12.650705] nouveau  [  DEVICE][0000:02:00.0] Family : NV50
[   12.655494] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[   12.655514] snd_hda_intel 0000:00:08.0: Disabling MSI
[   12.655848] cfg80211: Calling CRDA to update world regulatory domain
[   12.697692] nouveau  [   VBIOS][0000:02:00.0] using image from PRAMIN
[   12.697820] nouveau  [   VBIOS][0000:02:00.0] BIT signature found
[   12.697825] nouveau  [   VBIOS][0000:02:00.0] version 70.16.54.00.07
[   12.707657] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 17
[   12.714933] audit: type=1400 audit(1448218292.282:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=364 comm="apparmor_parser"
[   12.714943] audit: type=1400 audit(1448218292.282:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=364 comm="apparmor_parser"
[   12.714948] audit: type=1400 audit(1448218292.282:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=364 comm="apparmor_parser"
[   12.715456] audit: type=1400 audit(1448218292.282:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=364 comm="apparmor_parser"
[   12.715463] audit: type=1400 audit(1448218292.282:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=364 comm="apparmor_parser"
[   12.715728] audit: type=1400 audit(1448218292.282:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=364 comm="apparmor_parser"
[   12.720853] nouveau  [     PMC][0000:02:00.0] MSI interrupts enabled
[   12.720914] nouveau  [     PFB][0000:02:00.0] RAM type: DDR3
[   12.720916] nouveau  [     PFB][0000:02:00.0] RAM size: 1024 MiB
[   12.720919] nouveau  [     PFB][0000:02:00.0]    ZCOMP: 1920 tags
[   12.722288] nouveau  [    VOLT][0000:02:00.0] GPU voltage: 850000uv
[   12.754962] ath: phy0: Enable LNA combining
[   12.760047] ath: EEPROM regdomain: 0x60
[   12.760052] ath: EEPROM indicates we should expect a direct regpair map
[   12.760057] ath: Country alpha2 being used: 00
[   12.760058] ath: Regpair used: 0x60
[   12.791989] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.792846] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900027a0000, irq=17
[   12.842785] nouveau  [  PTHERM][0000:02:00.0] FAN control: none / external
[   12.842813] nouveau  [  PTHERM][0000:02:00.0] fan management: automatic
[   12.842820] nouveau  [  PTHERM][0000:02:00.0] internal sensor: yes
[   12.863644] nouveau  [     CLK][0000:02:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[   12.863651] nouveau  [     CLK][0000:02:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz
[   12.863655] nouveau  [     CLK][0000:02:00.0] 0f: core 500 MHz shader 1100 MHz memory 790 MHz
[   12.863711] nouveau  [     CLK][0000:02:00.0] --: core 405 MHz shader 810 MHz memory 324 MHz
[   12.864184] [TTM] Zone  kernel: Available graphics memory: 2023456 kiB
[   12.864187] [TTM] Initializing pool allocator
[   12.864195] [TTM] Initializing DMA pool allocator
[   12.864214] nouveau  [     DRM] VRAM: 1024 MiB
[   12.864216] nouveau  [     DRM] GART: 1048576 MiB
[   12.864222] nouveau  [     DRM] TMDS table version 2.0
[   12.864224] nouveau  [     DRM] DCB version 4.0
[   12.864227] nouveau  [     DRM] DCB outp 00: 01000323 00010034
[   12.864230] nouveau  [     DRM] DCB outp 01: 02011300 00000000
[   12.864232] nouveau  [     DRM] DCB outp 02: 02022312 00020010
[   12.864234] nouveau  [     DRM] DCB conn 00: 00000040
[   12.864236] nouveau  [     DRM] DCB conn 01: 00000100
[   12.864238] nouveau  [     DRM] DCB conn 02: 00001261
[   12.876967] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.876971] [drm] Driver supports precise vblank timestamp query.
[   12.954771] nouveau  [     DRM] MM: using COPY for buffer copies
[   13.029287] media: Linux media interface: v0.10
[   13.058908] Linux video capture interface: v2.00
[   13.143577] uvcvideo: Found UVC 1.00 device USB Video Device (174f:1120)
[   13.158352] input: USB Video Device as /devices/pci0000:00/0000:00:04.1/usb1/1-7/1-7:1.0/input/input15
[   13.159578] usbcore: registered new interface driver uvcvideo
[   13.159584] USB Video Class driver (1.1.1)
[   13.323821] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   13.388081] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   13.388087] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.388090] sound hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   13.388092] sound hdaudioC0D0:    mono: mono_out=0x0
[   13.388094] sound hdaudioC0D0:    inputs:
[   13.388097] sound hdaudioC0D0:      Internal Mic=0x19
[   13.388099] sound hdaudioC0D0:      Mic=0x18
[   13.428558] cfg80211: World regulatory domain updated:
[   13.428564] cfg80211:  DFS Master region: unset
[   13.428565] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   13.428569] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   13.428572] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   13.428575] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   13.428577] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   13.428579] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   13.912951] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   14.068864] nouveau  [     DRM] allocated 1366x768 fb: 0x70000, bo ffff8800dac57c00
[   14.069027] fbcon: nouveaufb (fb0) is primary device
[   14.193817] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input16
[   14.193952] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
[   14.387998] Console: switching to colour frame buffer device 170x48
[   14.389227] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[   14.389229] nouveau 0000:02:00.0: registered panic notifier
[   14.408094] [drm] Initialized nouveau 1.2.1 20120801 for 0000:02:00.0 on minor 0
[   14.408255] snd_hda_intel 0000:02:00.1: Disabling MSI
[   14.408271] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
[   14.549975] init: failsafe main process (594) killed by TERM signal
[   14.948137] Bluetooth: Core ver 2.20
[   14.948186] NET: Registered protocol family 31
[   14.948188] Bluetooth: HCI device and connection manager initialized
[   14.948725] Bluetooth: HCI socket layer initialized
[   14.948732] Bluetooth: L2CAP socket layer initialized
[   14.948753] Bluetooth: SCO socket layer initialized
[   14.976094] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.976099] Bluetooth: BNEP filters: protocol multicast
[   14.976109] Bluetooth: BNEP socket layer initialized
[   15.069480] Bluetooth: RFCOMM TTY layer initialized
[   15.069495] Bluetooth: RFCOMM socket layer initialized
[   15.069509] Bluetooth: RFCOMM ver 1.11
[   15.217742] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card1/input18
[   15.220124] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card1/input19
[   15.220226] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card1/input20
[   15.220308] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card1/input21
[   15.626651] audit: type=1400 audit(1448218295.194:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=757 comm="apparmor_parser"
[   15.626665] audit: type=1400 audit(1448218295.194:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=757 comm="apparmor_parser"
[   15.627213] audit: type=1400 audit(1448218295.194:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=757 comm="apparmor_parser"
[   15.771724] r8169 0000:03:00.0 eth0: link down
[   15.771775] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.771881] r8169 0000:03:00.0 eth0: link down
[   15.791875] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.826848] init: cups main process (762) killed by HUP signal
[   15.826868] init: cups main process ended, respawning
[   16.286349] audit: type=1400 audit(1448218295.854:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=830 comm="apparmor_parser"
[   16.994850] init: alsa-restore main process (965) terminated with status 99
[   17.675367] r8169 0000:03:00.0 eth0: link up
[   17.675386] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.050929] init: plymouth-upstart-bridge main process ended, respawning
[   20.066937] init: plymouth-upstart-bridge main process ended, respawning
[   45.761495] audit_printk_skb: 150 callbacks suppressed
[   45.761500] audit: type=1400 audit(1448218325.327:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1913 comm="apparmor_parser"
[   45.761513] audit: type=1400 audit(1448218325.327:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1913 comm="apparmor_parser"
[   45.762020] audit: type=1400 audit(1448218325.327:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1913 comm="apparmor_parser"

Dernière modification par Chester (Le 22/11/2015, à 22:04)

Hors ligne

#4 Le 22/11/2015, à 21:26

ratm54

Re : Problème installation Ubuntu 14.04

[    0.918150] ACPI PCC probe failed.

Cela doit être normal :
https://forum.ubuntu-fr.org/viewtopic.p … #p20180061

https://forum.ubuntu-fr.org/viewtopic.php?id=1834381

Que te retourne

sudo lsb_release -a

Effectivement cela peut être un problème mécanique ou un virus au niveau du BIOS. Mais avant d'arriver à ce genre de conclusions il faut éliminer les cas les plus probables.

Dernière modification par ratm54 (Le 22/11/2015, à 21:28)

Hors ligne

#5 Le 22/11/2015, à 22:08

Chester

Re : Problème installation Ubuntu 14.04

OK.
Voici ce que donne
sudo lsb_release -a

No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 14.04.3 LTS
Relase : 14.04
Codename : trusty

Je tape ceci à la main d'un autre ordi, car il a planté après que j'ai tapé la commande !

Hors ligne

#6 Le 22/11/2015, à 22:53

alca94

Re : Problème installation Ubuntu 14.04

Bonsoir
Un bon dépoussiérage du ventilateur avec changement de pâte thermique ne pourrait pas lui faire de mal (sur certain Acer c'est très accessible)

POUR METTRE LES RETOURS DU "TERMINAL"  voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641

Hors ligne

#7 Le 22/11/2015, à 23:14

Chester

Re : Problème installation Ubuntu 14.04

Je me suis trompé, c'est un Asus. Mais je vais tout de même essayer de nettoyer le ventilateur.

Pour le moment, impossible de lancer Ubuntu. L'ordi reste bloqué sur le premier écran de démarrage (Intel UNDI, PXE-2.1 (build...)...

Et plus précisément sur cette phrase : CLIENT MAC ADDR : ................ GUID............. DHCP. .... Le curseur clignote mais absolument rien ne se passe.

Bon, bon... C'est mal barré !

Hors ligne

#8 Le 22/11/2015, à 23:52

alca94

Re : Problème installation Ubuntu 14.04

Mais je vais tout de même essayer de nettoyer le ventilateur.

Pour bien faire il faut le sortir complètement ,sinon ça fait pas grand-chose (voir même a repousser la crasse a l'intérieur)

POUR METTRE LES RETOURS DU "TERMINAL"  voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641

Hors ligne

#9 Le 23/11/2015, à 10:05

ratm54

Re : Problème installation Ubuntu 14.04

Désactive le wake on lan (et PXE) dans le BIOS :

http://www.commentcamarche.net/forum/af … t-mac-addr

Hors ligne

#10 Le 23/11/2015, à 10:10

ratm54

Re : Problème installation Ubuntu 14.04

Sans le démonter essaye déja de le souffler avec de une bombe d'air sec.

Hors ligne

#11 Le 23/11/2015, à 12:15

Chester

Re : Problème installation Ubuntu 14.04

Bonjour et merci pour toutes ces réponses. Je vais essayer ce soir de modifier le bios. J'ai entièremet réinstallé Ubuntu hier soir. Désormais, il arrive qu'il se lance, même si je n'ai pas le sigle d'Ubuntu au démarrage. J'ai seulement l'écran violet.

Pour le ventilateur, j'ai réussi à le démonter entièrement et à bien le nettoyer. Effectivement, il faut changer les pâtes thermiques, notamment celle du processeur, qui est toute fondue. Comment faire pour retirer les restes de l'ancienne pâte ? Est-ce que je la lasse et cole un patch de la nouvelle par dessus ?

Hors ligne

#12 Le 23/11/2015, à 12:35

alca94

Re : Problème installation Ubuntu 14.04

Comment faire pour retirer les restes de l'ancienne pâte ? Est-ce que je la lasse et cole un patch de la nouvelle par dessus ?

normalement un simple chiffon suffit NE SURTOUT PAS GRATTER AVEC UN OBJET MÉTALIQUE et il faut surtout enlever l'ancienne avant d'en remettre .Un grain de riz sur le processeur et sur le chipset graphique
je préfère la pâte en seringue plutôt que les patch

Dernière modification par alca94 (Le 23/11/2015, à 12:37)

POUR METTRE LES RETOURS DU "TERMINAL"  voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641

Hors ligne

#13 Le 23/11/2015, à 12:43

Chester

Re : Problème installation Ubuntu 14.04

O.K. Sur le chipset graphique, le patch se décolle très facilement. En revanche, sur le processeur, on dirait que la pâte a fondu. Elle n'a pas l'air de se retirer facilement. J'essaierai de la retirer ce soir avec un chiffon. O.K. pour la pâte en seringue. Je vais essayer d'en trouver aujourd'hui pour faire un essai ce soir !

Merci !

Dernière modification par Chester (Le 23/11/2015, à 12:43)

Hors ligne

#14 Le 23/11/2015, à 12:48

alca94

Re : Problème installation Ubuntu 14.04

ou un petit coup d'alcool a brûler ou équivalent (white-spirit - acétone) ça devrait faire l'affaire (sans déborder du chipset)

POUR METTRE LES RETOURS DU "TERMINAL"  voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641

Hors ligne

#15 Le 23/11/2015, à 12:52

Chester

Re : Problème installation Ubuntu 14.04

O.K. Malheureusement, je pense que la pâte a bien débordé du chipset (en tout cas, pour le processeur, de la partie un peu en surplomb).

Hors ligne

#16 Le 23/11/2015, à 12:57

alca94

Re : Problème installation Ubuntu 14.04

la pâte a bien débordé du chipset

vous nettoyer fortement avec le chiffon imbibé ,l'important c'est la surface "miroir" du chipset

EDIT= vous pouvez toujours essayer de ramollir le patch avec un sèche-cheveux (ça supporte bien la chaleur moyenne)

Dernière modification par alca94 (Le 23/11/2015, à 13:18)

POUR METTRE LES RETOURS DU "TERMINAL"  voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641

Hors ligne

#17 Le 23/11/2015, à 13:06

Chester

Re : Problème installation Ubuntu 14.04

O.K. C'est bien noté. Encore merci !

Hors ligne

#18 Le 23/11/2015, à 20:22

Chester

Re : Problème installation Ubuntu 14.04

Bonsoir,

J'ai résolu le problème de démarrage. Désormais, l'ordi semble démarrer correctement (sauf quelque fois où il me propose le menu du GRUB). Et ce qui m'interpelle, c'est que je n'ai pas le logo Ubuntu au démarrage. J'ai seulement un écran violet, puis l'invite pour le mot de passe.

Je remets ici ce que me donne la commande :

sudo dmesg
[    0.204557] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.204706] NET: Registered protocol family 1
[    0.205068] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.276286] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.276557] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[    0.348274] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
[    0.348497] pci 0000:02:00.0: Video device with shadowed ROM
[    0.348522] PCI: CLS 64 bytes, default 64
[    0.348619] Trying to unpack rootfs image as initramfs...
[    0.743796] Freeing initrd memory: 19348K (ffff880035a26000 - ffff880036d0b000)
[    0.743867] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.743871] software IO TLB [mem 0xdbfa8000-0xdffa8000] (64MB) mapped at [ffff8800dbfa8000-ffff8800dffa7fff]
[    0.743933] Simple Boot Flag at 0xef set to 0x1
[    0.744202] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[    0.744212] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[    0.744311] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.744348] Scanning for low memory corruption every 60 seconds
[    0.744758] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.744799] Initialise system trusted keyring
[    0.744829] audit: initializing netlink subsys (disabled)
[    0.744854] audit: type=2000 audit(1448302450.744:1): initialized
[    0.745309] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.747642] zpool: loaded
[    0.747645] zbud: loaded
[    0.747839] VFS: Disk quotas dquot_6.5.2
[    0.747896] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.748635] fuse init (API version 7.23)
[    0.748846] Key type big_key registered
[    0.749310] Key type asymmetric registered
[    0.749313] Asymmetric key parser 'x509' registered
[    0.749372] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.749423] io scheduler noop registered
[    0.749426] io scheduler deadline registered (default)
[    0.749474] io scheduler cfq registered
[    0.749869] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[    0.750217] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[    0.750546] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[    0.750702] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.750723] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.750778] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.750779] vesafb: scrolling: redraw
[    0.750782] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.750788] mtrr: type mismatch for f7000000,200000 old: write-back new: write-combining
[    0.750791] mtrr: type mismatch for f7000000,100000 old: write-back new: write-combining
[    0.750793] mtrr: type mismatch for f7000000,80000 old: write-back new: write-combining
[    0.750796] mtrr: type mismatch for f7000000,40000 old: write-back new: write-combining
[    0.750798] mtrr: type mismatch for f7000000,20000 old: write-back new: write-combining
[    0.750800] mtrr: type mismatch for f7000000,10000 old: write-back new: write-combining
[    0.750803] mtrr: type mismatch for f7000000,8000 old: write-back new: write-combining
[    0.750805] mtrr: type mismatch for f7000000,4000 old: write-back new: write-combining
[    0.750808] mtrr: type mismatch for f7000000,2000 old: write-back new: write-combining
[    0.750810] mtrr: type mismatch for f7000000,1000 old: write-back new: write-combining
[    0.750828] vesafb: framebuffer at 0xf7000000, mapped to 0xffffc90002780000, using 1216k, total 1216k
[    0.750963] Console: switching to colour frame buffer device 80x30
[    0.750976] fb0: VESA VGA frame buffer device
[    0.751003] intel_idle: does not run on family 6 model 23
[    0.751162] ACPI: AC Adapter [AC0] (on-line)
[    0.751337] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.751343] ACPI: Power Button [PWRB]
[    0.751397] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.751400] ACPI: Sleep Button [SLPB]
[    0.751457] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.753888] ACPI: Lid Switch [LID]
[    0.753956] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.753959] ACPI: Power Button [PWRF]
[    0.754719] Monitor-Mwait will be used to enter C-1 state
[    0.754735] Monitor-Mwait will be used to enter C-2 state
[    0.754748] Monitor-Mwait will be used to enter C-3 state
[    0.754760] tsc: Marking TSC unstable due to TSC halts in idle
[    0.754776] ACPI: acpi_idle registered with cpuidle
[    0.762082] thermal LNXTHERM:00: registered as thermal_zone0
[    0.762086] ACPI: Thermal Zone [THRM] (83 C)
[    0.762150] GHES: HEST is not enabled!
[    0.762329] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.766040] Linux agpgart interface v0.103
[    0.769555] brd: module loaded
[    0.770662] loop: module loaded
[    0.771088] libphy: Fixed MDIO Bus: probed
[    0.771092] tun: Universal TUN/TAP device driver, 1.6
[    0.771094] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.771185] PPP generic driver version 2.4.2
[    0.771404] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.771411] ehci-pci: EHCI PCI platform driver
[    0.771713] ehci-pci 0000:00:04.1: EHCI Host Controller
[    0.771723] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[    0.771761] ehci-pci 0000:00:04.1: debug port 1
[    0.771851] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[    0.771875] ehci-pci 0000:00:04.1: irq 22, io mem 0xfae7ec00
[    0.780067] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    0.780226] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.780229] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.780232] usb usb1: Product: EHCI Host Controller
[    0.780234] usb usb1: Manufacturer: Linux 3.19.0-33-generic ehci_hcd
[    0.780236] usb usb1: SerialNumber: 0000:00:04.1
[    0.780506] hub 1-0:1.0: USB hub found
[    0.780516] hub 1-0:1.0: 11 ports detected
[    0.783067] ehci-pci 0000:00:06.1: EHCI Host Controller
[    0.783077] ehci-pci 0000:00:06.1: new USB bus registered, assigned bus number 2
[    0.783086] ehci-pci 0000:00:06.1: debug port 1
[    0.783166] ehci-pci 0000:00:06.1: cache line size of 64 is not supported
[    0.783185] ehci-pci 0000:00:06.1: irq 20, io mem 0xfae7e800
[    0.792057] ehci-pci 0000:00:06.1: USB 2.0 started, EHCI 1.00
[    0.792118] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.792121] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.792124] usb usb2: Product: EHCI Host Controller
[    0.792126] usb usb2: Manufacturer: Linux 3.19.0-33-generic ehci_hcd
[    0.792128] usb usb2: SerialNumber: 0000:00:06.1
[    0.792314] hub 2-0:1.0: USB hub found
[    0.792322] hub 2-0:1.0: 1 port detected
[    0.792581] ehci-platform: EHCI generic platform driver
[    0.792607] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.792624] ohci-pci: OHCI PCI platform driver
[    0.792723] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    0.792731] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 3
[    0.792767] ohci-pci 0000:00:04.0: irq 23, io mem 0xfae7f000
[    0.804819] ACPI: Battery Slot [BAT0] (battery present)
[    0.850093] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.850096] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.850098] usb usb3: Product: OHCI PCI host controller
[    0.850101] usb usb3: Manufacturer: Linux 3.19.0-33-generic ohci_hcd
[    0.850103] usb usb3: SerialNumber: 0000:00:04.0
[    0.850280] hub 3-0:1.0: USB hub found
[    0.850289] hub 3-0:1.0: 11 ports detected
[    0.852189] ohci-pci 0000:00:06.0: OHCI PCI host controller
[    0.852199] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 4
[    0.852238] ohci-pci 0000:00:06.0: irq 21, io mem 0xfae7d000
[    0.910066] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.910069] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.910071] usb usb4: Product: OHCI PCI host controller
[    0.910073] usb usb4: Manufacturer: Linux 3.19.0-33-generic ohci_hcd
[    0.910075] usb usb4: SerialNumber: 0000:00:06.0
[    0.910246] hub 4-0:1.0: USB hub found
[    0.910257] hub 4-0:1.0: 1 port detected
[    0.910524] ohci-platform: OHCI generic platform driver
[    0.910548] uhci_hcd: USB Universal Host Controller Interface driver
[    0.910640] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.914438] i8042: Detected active multiplexing controller, rev 1.1
[    0.916966] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.916972] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.917014] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.917047] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.917077] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.917272] mousedev: PS/2 mouse device common for all mice
[    0.917618] rtc_cmos 00:03: RTC can wake from S4
[    0.917891] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.917944] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    0.917957] i2c /dev entries driver
[    0.918055] device-mapper: uevent: version 1.0.3
[    0.918168] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[    0.918192] ledtrig-cpu: registered to indicate activity on CPUs
[    0.918450] PCCT header not found.
[    0.918452] ACPI PCC probe failed.
[    0.918575] TCP: cubic registered
[    0.918731] NET: Registered protocol family 10
[    0.919023] NET: Registered protocol family 17
[    0.919039] Key type dns_resolver registered
[    0.919487] Loading compiled-in X.509 certificates
[    0.920712] Loaded X.509 cert 'Magrathea: Glacier signing key: 4bb43fbaf12fd3a0265773e00e22f4399f634b16'
[    0.920741] registered taskstats version 1
[    0.923425] Key type trusted registered
[    0.928402] Key type encrypted registered
[    0.928417] AppArmor: AppArmor sha1 policy hashing enabled
[    0.928423] ima: No TPM chip found, activating TPM-bypass!
[    0.928462] evm: HMAC attrs: 0x1
[    0.929052]   Magic number: 7:836:241
[    0.929262] rtc_cmos 00:03: setting system clock to 2015-11-23 18:14:11 UTC (1448302451)
[    0.930188] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.930190] EDD information not available.
[    0.930279] PM: Hibernation image not present or could not be loaded.
[    0.931038] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[    0.931046] Write protecting the kernel read-only data: 12288k
[    0.931434] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[    0.931691] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
[    0.948997] systemd-udevd[102]: starting version 204
[    0.958657] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.007898] ahci 0000:00:0b.0: version 3.0
[    1.008413] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[    1.008571] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[    1.008576] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs 
[    1.009678] scsi host0: ahci
[    1.009887] scsi host1: ahci
[    1.010057] scsi host2: ahci
[    1.010211] scsi host3: ahci
[    1.010367] scsi host4: ahci
[    1.010520] scsi host5: ahci
[    1.010602] ata1: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76100 irq 24
[    1.010605] ata2: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76180 irq 24
[    1.010606] ata3: DUMMY
[    1.010608] ata4: DUMMY
[    1.010609] ata5: DUMMY
[    1.010611] ata6: DUMMY
[    1.014819] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.014834] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.014847] r8169 0000:03:00.0: enabling device (0001 -> 0003)
[    1.015105] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[    1.015505] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90002750000, 48:5b:39:3a:03:69, XID 083000c0 IRQ 25
[    1.015509] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.092065] usb 1-7: new high-speed USB device number 2 using ehci-pci
[    1.302272] usb 1-7: New USB device found, idVendor=174f, idProduct=1120
[    1.302276] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.302278] usb 1-7: Product: USB Video Device
[    1.302280] usb 1-7: Manufacturer: D-MAX
[    1.328052] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.328077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.329328] ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA50A, max UDMA/100
[    1.329333] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.330369] ata2.00: ATAPI: Slimtype DVD A  DS8A4S, JA22, max UDMA/100
[    1.330696] ata1.00: configured for UDMA/100
[    1.330907] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54755 A50A PQ: 0 ANSI: 5
[    1.331257] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.331321] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.331325] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.331401] sd 0:0:0:0: [sda] Write Protect is off
[    1.331405] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.331451] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.331665] ata2.00: configured for UDMA/100
[    1.340034] scsi 1:0:0:0: CD-ROM            Slimtype DVD A  DS8A4S    JA22 PQ: 0 ANSI: 5
[    1.365898] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.365904] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.366153] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.366256] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.382744]  sda: sda1 sda2 < sda5 sda6 >
[    1.383376] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.827644] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.035095] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[    2.074598] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[    2.215113] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12
[    2.417193] random: init urandom read with 101 bits of entropy available
[    2.843704] init: plymouth-upstart-bridge main process (174) terminated with status 1
[    2.843722] init: plymouth-upstart-bridge main process ended, respawning
[    2.847442] init: plymouth-upstart-bridge main process (186) terminated with status 1
[    2.847464] init: plymouth-upstart-bridge main process ended, respawning
[    2.851123] init: plymouth-upstart-bridge main process (188) terminated with status 1
[    2.851142] init: plymouth-upstart-bridge main process ended, respawning
[    2.854668] init: plymouth-upstart-bridge main process (189) terminated with status 1
[    2.854688] init: plymouth-upstart-bridge main process ended, respawning
[    2.857678] init: plymouth-upstart-bridge main process (191) terminated with status 1
[    2.857696] init: plymouth-upstart-bridge main process ended, respawning
[    2.861126] init: plymouth-upstart-bridge main process (192) terminated with status 1
[    2.861146] init: plymouth-upstart-bridge main process ended, respawning
[    2.864594] init: plymouth-upstart-bridge main process (194) terminated with status 1
[    2.864611] init: plymouth-upstart-bridge main process ended, respawning
[    2.867991] init: plymouth-upstart-bridge main process (195) terminated with status 1
[    2.868068] init: plymouth-upstart-bridge main process ended, respawning
[    2.871791] init: plymouth-upstart-bridge main process (197) terminated with status 1
[    2.871807] init: plymouth-upstart-bridge main process ended, respawning
[    2.878142] init: plymouth-upstart-bridge main process (198) terminated with status 1
[    2.878161] init: plymouth-upstart-bridge main process ended, respawning
[    2.884735] init: plymouth-upstart-bridge main process (201) terminated with status 1
[    2.884755] init: plymouth-upstart-bridge respawning too fast, stopped
[    2.926941] random: nonblocking pool is initialized
[   10.123278] Adding 5858300k swap on /dev/sda5.  Priority:-1 extents:1 across:5858300k FS
[   10.445373] systemd-udevd[304]: starting version 204
[   10.633434] lp: driver loaded but no devices found
[   10.642087] ppdev: user-space parallel port driver
[   11.557465] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   11.572324] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[   11.572333] ACPI Warning: SystemIO range 0x0000000000004e00-0x0000000000004e3f conflicts with OpRegion 0x0000000000004e00-0x0000000000004e3f (\_SB_.PCI0.SM00) (20141107/utaddress-258)
[   11.572340] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.584982] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   11.593708] acpi device:0b: registered as cooling_device2
[   11.593874] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:08/LNXVIDEO:00/input/input13
[   11.602790] asus_laptop: Asus Laptop Support version 0.42
[   11.602914] asus_laptop: BSTS called, 0xff5f returned
[   11.602927] asus_laptop:   K50ID model detected
[   11.603434] asus_laptop: Backlight controlled by ACPI video driver
[   11.603558] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input14
[   11.640434] wmi: Mapper loaded
[   11.753209] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.041448] audit: type=1400 audit(1448302462.609:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=385 comm="apparmor_parser"
[   12.041458] audit: type=1400 audit(1448302462.609:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=385 comm="apparmor_parser"
[   12.041464] audit: type=1400 audit(1448302462.609:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=385 comm="apparmor_parser"
[   12.041986] audit: type=1400 audit(1448302462.609:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=385 comm="apparmor_parser"
[   12.041995] audit: type=1400 audit(1448302462.609:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=385 comm="apparmor_parser"
[   12.042285] audit: type=1400 audit(1448302462.609:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=385 comm="apparmor_parser"
[   12.042577] audit: type=1400 audit(1448302462.609:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=409 comm="apparmor_parser"
[   12.042587] audit: type=1400 audit(1448302462.609:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=409 comm="apparmor_parser"
[   12.042593] audit: type=1400 audit(1448302462.609:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=409 comm="apparmor_parser"
[   12.043151] audit: type=1400 audit(1448302462.609:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=409 comm="apparmor_parser"
[   12.112183] [drm] Initialized drm 1.1.0 20060810
[   12.231747] media: Linux media interface: v0.10
[   12.263224] cfg80211: Calling CRDA to update world regulatory domain
[   12.284394] Linux video capture interface: v2.00
[   12.419722] MXM: GUID detected in BIOS
[   12.419844] ACPI Warning: \_SB_.PCI0.XVR0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[   12.419892] ACPI: \_SB_.PCI0.XVR0.VGA_: failed to evaluate _DSM
[   12.419941] checking generic (f7000000 130000) vs hw (e0000000 10000000)
[   12.419943] checking generic (f7000000 130000) vs hw (f6000000 2000000)
[   12.419945] fb: switching to nouveaufb from VESA VGA
[   12.420029] Console: switching to colour dummy device 80x25
[   12.420871] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 18
[   12.421289] nouveau  [  DEVICE][0000:02:00.0] BOOT0  : 0x0a5680a2
[   12.421294] nouveau  [  DEVICE][0000:02:00.0] Chipset: GT216 (NVA5)
[   12.421297] nouveau  [  DEVICE][0000:02:00.0] Family : NV50
[   12.455885] nouveau  [   VBIOS][0000:02:00.0] using image from PRAMIN
[   12.456025] nouveau  [   VBIOS][0000:02:00.0] BIT signature found
[   12.456029] nouveau  [   VBIOS][0000:02:00.0] version 70.16.54.00.07
[   12.457305] nouveau  [     PMC][0000:02:00.0] MSI interrupts enabled
[   12.457358] nouveau  [     PFB][0000:02:00.0] RAM type: DDR3
[   12.457360] nouveau  [     PFB][0000:02:00.0] RAM size: 1024 MiB
[   12.457362] nouveau  [     PFB][0000:02:00.0]    ZCOMP: 1920 tags
[   12.458840] nouveau  [    VOLT][0000:02:00.0] GPU voltage: 850000uv
[   12.488820] nouveau  [  PTHERM][0000:02:00.0] FAN control: none / external
[   12.488845] nouveau  [  PTHERM][0000:02:00.0] fan management: automatic
[   12.488852] nouveau  [  PTHERM][0000:02:00.0] internal sensor: yes
[   12.508758] nouveau  [     CLK][0000:02:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[   12.508764] nouveau  [     CLK][0000:02:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz
[   12.508769] nouveau  [     CLK][0000:02:00.0] 0f: core 500 MHz shader 1100 MHz memory 790 MHz
[   12.508822] nouveau  [     CLK][0000:02:00.0] --: core 405 MHz shader 810 MHz memory 324 MHz
[   12.509203] [TTM] Zone  kernel: Available graphics memory: 2023456 kiB
[   12.509206] [TTM] Initializing pool allocator
[   12.509216] [TTM] Initializing DMA pool allocator
[   12.509231] nouveau  [     DRM] VRAM: 1024 MiB
[   12.509233] nouveau  [     DRM] GART: 1048576 MiB
[   12.509239] nouveau  [     DRM] TMDS table version 2.0
[   12.509241] nouveau  [     DRM] DCB version 4.0
[   12.509244] nouveau  [     DRM] DCB outp 00: 01000323 00010034
[   12.509246] nouveau  [     DRM] DCB outp 01: 02011300 00000000
[   12.509248] nouveau  [     DRM] DCB outp 02: 02022312 00020010
[   12.509250] nouveau  [     DRM] DCB conn 00: 00000040
[   12.509253] nouveau  [     DRM] DCB conn 01: 00000100
[   12.509254] nouveau  [     DRM] DCB conn 02: 00001261
[   12.518538] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.518541] [drm] Driver supports precise vblank timestamp query.
[   12.526229] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[   12.526245] snd_hda_intel 0000:00:08.0: Disabling MSI
[   12.530324] nouveau  [     DRM] MM: using COPY for buffer copies
[   12.533822] uvcvideo: Found UVC 1.00 device USB Video Device (174f:1120)
[   12.548044] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 17
[   12.548606] input: USB Video Device as /devices/pci0000:00/0000:00:04.1/usb1/1-7/1-7:1.0/input/input15
[   12.548820] usbcore: registered new interface driver uvcvideo
[   12.548823] USB Video Class driver (1.1.1)
[   12.577331] cfg80211: World regulatory domain updated:
[   12.577337] cfg80211:  DFS Master region: unset
[   12.577339] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.577342] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.577345] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.577347] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.577349] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.577352] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.596644] ath: phy0: Enable LNA combining
[   12.601144] ath: EEPROM regdomain: 0x60
[   12.601148] ath: EEPROM indicates we should expect a direct regpair map
[   12.601152] ath: Country alpha2 being used: 00
[   12.601154] ath: Regpair used: 0x60
[   12.646600] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.647210] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90002820000, irq=17
[   12.917879] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   13.196153] init: failsafe main process (618) killed by TERM signal
[   13.344044] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   13.344050] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.344053] sound hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   13.344055] sound hdaudioC0D0:    mono: mono_out=0x0
[   13.344057] sound hdaudioC0D0:    inputs:
[   13.344060] sound hdaudioC0D0:      Internal Mic=0x19
[   13.344062] sound hdaudioC0D0:      Mic=0x18
[   13.589021] init: cups main process (732) killed by HUP signal
[   13.589042] init: cups main process ended, respawning
[   13.647410] nouveau  [     DRM] allocated 1366x768 fb: 0x70000, bo ffff8800d96da400
[   13.647672] fbcon: nouveaufb (fb0) is primary device
[   13.647747] Console: switching to colour frame buffer device 170x48
[   13.647782] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[   13.647785] nouveau 0000:02:00.0: registered panic notifier
[   13.656106] [drm] Initialized nouveau 1.2.1 20120801 for 0000:02:00.0 on minor 0
[   13.656301] snd_hda_intel 0000:02:00.1: Disabling MSI
[   13.656319] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
[   13.757598] Bluetooth: Core ver 2.20
[   13.757698] NET: Registered protocol family 31
[   13.757701] Bluetooth: HCI device and connection manager initialized
[   13.758275] Bluetooth: HCI socket layer initialized
[   13.758283] Bluetooth: L2CAP socket layer initialized
[   13.758301] Bluetooth: SCO socket layer initialized
[   13.767079] Bluetooth: RFCOMM TTY layer initialized
[   13.767095] Bluetooth: RFCOMM socket layer initialized
[   13.767106] Bluetooth: RFCOMM ver 1.11
[   13.777861] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.777868] Bluetooth: BNEP filters: protocol multicast
[   13.777878] Bluetooth: BNEP socket layer initialized
[   14.182222] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input16
[   14.182392] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
[   14.481376] r8169 0000:03:00.0 eth0: link down
[   14.481398] r8169 0000:03:00.0 eth0: link down
[   14.481428] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.498141] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.520908] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card1/input18
[   14.521022] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card1/input19
[   14.521122] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card1/input20
[   14.524329] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card1/input21
[   16.339973] r8169 0000:03:00.0 eth0: link up
[   16.339994] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   43.704915] audit_printk_skb: 168 callbacks suppressed
[   43.704920] audit: type=1400 audit(1448302494.271:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2088 comm="apparmor_parser"
[   43.704933] audit: type=1400 audit(1448302494.271:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2088 comm="apparmor_parser"
[   43.705448] audit: type=1400 audit(1448302494.271:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2088 comm="apparmor_parser"

Hors ligne

#19 Le 23/11/2015, à 21:32

ratm54

Re : Problème installation Ubuntu 14.04

Du coup ton problème ressemble furieusement à celui ci :
https://forum.ubuntu-fr.org/viewtopic.p … #p21044391

Hors ligne

#20 Le 23/11/2015, à 22:49

alca94

Re : Problème installation Ubuntu 14.04

Et vos problème de surchauffe et d'arrêt brusque ?

POUR METTRE LES RETOURS DU "TERMINAL"  voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641

Hors ligne

#21 Le 24/11/2015, à 01:02

Chester

Re : Problème installation Ubuntu 14.04

Pour les problèmes d'arrêt brusque, c'est beaucoup mieux depuis que j'ai nettoyé le ventilateur. Mais je l'entends toujours tourner à fond. Demain, je vais me procurer de la pâte thermique.

Pour le reste, c'est un peu mieux, mais pas top. Parfois, l'ordi bloque en cours de démarrage sur un écran noir, ou alors me propose le menu du grub, puis bloque après. Là, il a redémarré cinq fois sans problème, mais toujours sans le logo d'ubuntu.

ratm54 a écrit :

Du coup ton problème ressemble furieusement à celui ci :
https://forum.ubuntu-fr.org/viewtopic.p … #p21044391

Donc, ce serait un problème de carte graphique ? Il y a des chipsets nvidia dans cet ordinateur. Il faudrait que j'essaie la procédure décrite, mais je n'aurai pas le temps demain.

Dernière modification par Chester (Le 24/11/2015, à 01:04)

Hors ligne

#22 Le 24/11/2015, à 10:21

alca94

Re : Problème installation Ubuntu 14.04

Faut surtout pas fonctionner sans aucune pâte thermique

POUR METTRE LES RETOURS DU "TERMINAL"  voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641

Hors ligne

#23 Le 24/11/2015, à 10:47

ratm54

Re : Problème installation Ubuntu 14.04

C'est le processeur qui fera de la pâte thermique lol

Donc, ce serait un problème de carte graphique ? Il y a des chipsets nvidia dans cet ordinateur. Il faudrait que j'essaie la procédure décrite, mais je n'aurai pas le temps demain.

Oui mais les solutions de ce poste n'ont pas fonctionné jusque la.
2 approches :
1) Ce n'est pas essentiel donc laisse tombé ce point
2) Essaie le driver nvidia à la place du driver nouveau

Hors ligne

#24 Le 24/11/2015, à 13:33

Chester

Re : Problème installation Ubuntu 14.04

Si, il reste de la pâte thermique. J'en ai pris un bout sur un chipset sur lequel il y avait un gros patch. Mais je vais refaire les pâtes ce soir.

En fait, l'ordinateur ne fonctionne pas vraiment bien. Parfois, il démarre sans problème, parfois (et c'est le plus souvent), il bloque sur le message APCI PCC Probe failed, ou alors me lance le menu du GRUB. Lorsque je sélectionne lancer Ubuntu, Ubuntu ne démarre pas. Bref, l'ordinateur est beaucoup trop capricieux !

Comment faire pour essayer le driver nvdia ? Je n'ai jamais essayé d'utiliser les drivers propriétaires jusqu'à présent. Il y a une doc sur le site ?

Dernière modification par Chester (Le 24/11/2015, à 13:34)

Hors ligne

#25 Le 24/11/2015, à 13:41

ratm54

Re : Problème installation Ubuntu 14.04

http://doc.ubuntu-fr.org/nvidia

http://www.nvidia.com/object/IO_32667.html

Dernière modification par ratm54 (Le 25/11/2015, à 10:41)

Hors ligne

Pages : 1 2