#1 Le 28/02/2008, à 11:42
- gwado
Afficher des choses différentes sur 2 écrans depuis un pc
Bonjour,
j'aimerais savoir s'il est possible d'afficher une chose sur mon pc, tout en affichant quelque chose d'autre sur un écran différent branché à ce même pc ?
en fait, pour une soirée, je souhaite passer de la musique en utilisant amarok, je dois donc avoir amarok d'afficher sur mon pc, mais j'aimerais également diffuser de la vidéo depuis ce même pc vers un grand écran.
comment faire ?
merci
raph
Hors ligne
#2 Le 28/02/2008, à 11:49
- Miaou86
Re : Afficher des choses différentes sur 2 écrans depuis un pc
oui c'est possible quel est ta carte graphique. il faut modifier le fichier xorg
moi avec une nvidia ça donne ça.
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Mon Feb 26 23:38:46 PST 2007
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "EcranPC" 0 0
Screen 1 "Screen1" 1152 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
Load "dbe"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"
EndSection
Section "Monitor"
Identifier "MonitorPC"
VendorName "LG"
ModelName "CB773F-NJ"
HorizSync 28.0 - 51.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: xconfig, VertRefresh source: xconfig
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA Card"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6600 GT"
BusID "PCI:1:0:0"
Option "NvAGP" "3"
VideoRam 131072
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6600 GT"
BusID "PCI:1:0:0"
Option "NvAGP" "3"
VideoRam 131072
Screen 1
EndSection
Section "Screen"
Identifier "EcranPC"
Device "NVIDIA Card"
Monitor "MonitorPC"
DefaultDepth 24
Option "XAANoOffscreenPixmaps"
Option "AddARGBGLXVisuals" "true"
Option "NoLogo" "true"
Option "RenderAccel" "true"
Option "metamodes" "CRT: 1152x864 +0+0"
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "XAANoOffscreenPixmaps"
Option "AddARGBGLXVisuals" "true"
Option "NoLogo" "true"
Option "RenderAccel" "true"
Option "metamodes" "TV: 1024x768 +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Ma Config : MSI gx600-53 / proc T8100 + 4GO Ram + geforce 8600m gt 512 mo
Ecran tactile Acer T230H et carte TV Hauppage 900H
Hors ligne
#3 Le 28/02/2008, à 12:02
- gwado
Re : Afficher des choses différentes sur 2 écrans depuis un pc
mmm une "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
je n'ai pas le second écran près de moi et je ne pourrais tester que quelques heures avant l'heure H.
voici mon xorg :
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Dernière modification par gwado (Le 28/02/2008, à 12:03)
Hors ligne
#4 Le 28/02/2008, à 12:08
- Miaou86
Re : Afficher des choses différentes sur 2 écrans depuis un pc
je ne connais pas les carte graphique intel mais regarde ici
Ma Config : MSI gx600-53 / proc T8100 + 4GO Ram + geforce 8600m gt 512 mo
Ecran tactile Acer T230H et carte TV Hauppage 900H
Hors ligne
#5 Le 28/02/2008, à 12:11
- gwado
Re : Afficher des choses différentes sur 2 écrans depuis un pc
merci
Hors ligne