#1 Le 11/12/2015, à 19:46
- Lebas
[ Résolu] Démarrage
Bonjour,
Depuis quelques temps, j'ai un problème au démarrage d'ubuntu version 14.04.3 LTS, après des mises à jour. L'écran passe du noir au violet et reste en l'état.
Je viens de faire un boot repair :
http://paste.ubuntu.com/13935942 et 5 minutes avant, le même avec comme fin 13935859.
Merci pour vos réponses.
Dernière modification par Lebas (Le 28/12/2015, à 09:20)
Hors ligne
#2 Le 12/12/2015, à 08:41
- malbo
Re : [ Résolu] Démarrage
Si tu presses la touche SHIFT au démarrage, est-ce que tu peux faire apparaître le menu Grub ?
Hors ligne
#3 Le 12/12/2015, à 10:10
- zephirin
Re : [ Résolu] Démarrage
Tu as essayé de démarrer en mode recovery ? (échap au démarrage puis option puis Ubuntu recovery).
AIO tactile 27" Samsung i5 8GB DDR3 W11 - tour Antec Asus P5GCMX1333 W11
iMac 27" fin 2009 i5 750 16GBssd2TB cg512 HighSierra - MacBookAir 13" 2017 i5 8GB ssd120 Monterey - MacBookPro mi 2012 8GB DDR3 Catalina
Hors ligne
#4 Le 12/12/2015, à 11:17
- Lebas
Re : [ Résolu] Démarrage
Bonjour à tous le deux. Merci pour vos réponses.
En mode recovery, cela n'a rien donné, jamais même, puisque ce n'est pas la première fois que ces problèmes arrivent et que j'ai essayé ça plusieurs fois.
Par contre, j'ai appuyé sur la touche shift ce matin, est apparu le menu Grub, avec 4 options (est-ce bien cela?) et l'ordinateur a démarré normalement.
Je vais essayé de nouveau comme ça et je vous tiens au courant.
Hors ligne
#5 Le 12/12/2015, à 11:26
- Lebas
Re : [ Résolu] Démarrage
Me revoilà. 4 essais dont deux en appuyant sur la touche shift et deux sans appuyer sur cette touche et l'ordi démarre normalement.
Ce qui est nouveau c'est que jusqu'à la dernière mise à jour le menu Grub ne s'affichait pas au démarrage.
Est ce que le boot repair d'hier est à l'origine du retour à la normale?
Bref je n'y comprends rien mais ça fonctionne.
Merci à vous deux d'avoir pris du temps.
Cordialement
PS: au cas où l'un de vous deux a une idée afin d'éclairer ma lanterne.
Hors ligne
#6 Le 12/12/2015, à 11:35
- malbo
Re : [ Résolu] Démarrage
Par contre, j'ai appuyé sur la touche shift ce matin, est apparu le menu Grub, avec 4 options (est-ce bien cela?)
Oui, d'après ton Boot-Info, ces 4 options devraient être :
Ubuntu
Advanced options for Ubuntu
Memory test (memtest86+)
Memory test (memtest86+, serial console 115200)
En fait, je t'avais demandé de faire cela parce que j'avais en tête de te proposer de sélectionner "Advanced options for Ubuntu", ce qui aurait fait apparaître un sous-menu dans lequel tu aurais eu l'opportunité de démarrer sur le noyau précédent (3.19.0-25) plutôt que sur le noyau 3.19.0-39 sur lequel l'ordi démarre par défaut.
Mais du coup, je constate que le simple fait de passer par le menu Grub te permet de démarrer donc ça ne semble pas nécessaire de passer par ce noyau précédent. Je n'ai aucune idée sur la raison de ce problème ni comment le résoudre.
Hors ligne
#7 Le 12/12/2015, à 11:41
- zephirin
Re : [ Résolu] Démarrage
Sur mes ordi j'appuie sur "echap" pour avoir le Grub, mais peu importe puisque c'est le même objectif.
AIO tactile 27" Samsung i5 8GB DDR3 W11 - tour Antec Asus P5GCMX1333 W11
iMac 27" fin 2009 i5 750 16GBssd2TB cg512 HighSierra - MacBookAir 13" 2017 i5 8GB ssd120 Monterey - MacBookPro mi 2012 8GB DDR3 Catalina
Hors ligne
#8 Le 12/12/2015, à 13:15
- malbo
Re : [ Résolu] Démarrage
C'est bien la touche SHIFT qui répond au cas de Lebas comme on peut voir dans ce paragraphe de la doc Grub : 3.1 Afficher le menu GRUB
On peut y lire : "Le menu de GRUB ne s’affiche pas au démarrage d’un PC mono-système. Il suffit de laisser la touche Majuscule (shift) enfoncée avant le chargement de GRUB pour l'afficher. ". Le mot qui compte, c'est "mono-système" qui signifie que ça concerne les cas où seulement une installation d'une distribution utilisant Grub est installée. Dans le cas d'un multi-boot (y compris un dual-boot Windows / Ubuntu) , il n'y a pas besoin de presser la touche SHIFT parce que le menu Grub s'affiche automatiquement.
Donc zephirin, si tu es en multi-boot sur tes ordis, tu n'es pas concerné.
Dernière modification par malbo (Le 12/12/2015, à 13:18)
Hors ligne
#9 Le 12/12/2015, à 13:37
- zephirin
Re : [ Résolu] Démarrage
Merci pour l'éclairage malbo .
Bizarre quand même pour moi car je n'ai aucun pc multi-boot.
Dernière modification par zephirin (Le 12/12/2015, à 13:37)
AIO tactile 27" Samsung i5 8GB DDR3 W11 - tour Antec Asus P5GCMX1333 W11
iMac 27" fin 2009 i5 750 16GBssd2TB cg512 HighSierra - MacBookAir 13" 2017 i5 8GB ssd120 Monterey - MacBookPro mi 2012 8GB DDR3 Catalina
Hors ligne
#10 Le 12/12/2015, à 14:04
- Lebas
Re : [ Résolu] Démarrage
Merci à vous, j'ai encore (et ça va continuer) appris des choses notamment que j'étais en mono système puisque je n'ai qu'ubuntu sur ma machine.
Merci pour vos interventions.
Hors ligne
#11 Le 12/12/2015, à 18:07
- Lebas
Re : [ Résolu] Démarrage
Je viens d'enlever "resolu" car de nouveau l'écran reste violet.
Là, j'écris de ma tablette.
J'ai essayé toutes les options du menu grub et l'écran reste violet.
N'y aurait-il qu'une nouvelle installation à faire, ce que j'ai déjà fait à plusieurs reprises.
Merci de vos réponses.
Hors ligne
#12 Le 12/12/2015, à 18:33
- malbo
Re : [ Résolu] Démarrage
N'y aurait-il qu'une nouvelle installation à faire, ce que j'ai déjà fait à plusieurs reprises.
Si tu l'as fait à plusieurs reprises, c'est justement parce que tu avais ce même problème ?
Hors ligne
#13 Le 12/12/2015, à 18:43
- Lebas
Re : [ Résolu] Démarrage
Oui
Hors ligne
#14 Le 12/12/2015, à 18:53
- Lebas
Re : [ Résolu] Démarrage
Dernier boot info
http://paste.ubuntu.com/13971565
Hors ligne
#15 Le 12/12/2015, à 19:33
- malbo
Re : [ Résolu] Démarrage
Ton dernier Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub and uses an embedded config file:
---------------------------------------------------------------------------
search.fs_uuid 97f0c419-e318-4747-bb50-9704607aa617 root hd1,msdos1
set prefix=($root)'/boot/grub'
1376]
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub.
=> Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub and uses an embedded config file:
---------------------------------------------------------------------------
search.fs_uuid 97f0c419-e318-4747-bb50-9704607aa617 root hd1,msdos1
set prefix=($root)'/boot/grub'
1376]
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdb2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdb5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204885504 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525167 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,139,260,775 1,139,258,728 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 968,491,007 968,488,960 83 Linux
/dev/sdb2 968,493,054 976,771,071 8,278,018 5 Extended
/dev/sdb5 968,493,056 976,771,071 8,278,016 82 Linux swap / Solaris
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 2,048 976,771,071 976,769,024 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 E46032DC6032B560 ntfs Seagate Expansion Drive
/dev/sdb1 97f0c419-e318-4747-bb50-9704607aa617 ext4
/dev/sdb5 dc3baa49-1769-4ffd-a930-0723dafd4df1 swap
/dev/sdc1 fa24b0a0-1d50-4cf2-acba-8fa53c0b762a ext4
/dev/sr0 iso9660 Ubuntu 14.04.3 LTS amd64
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Dec 12 16:39 ata-Hitachi_HTS547550A9E384_J2150050GJNN8C -> ../../sdb
lrwxrwxrwx 1 root root 10 Dec 12 16:25 ata-Hitachi_HTS547550A9E384_J2150050GJNN8C-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Dec 12 16:25 ata-Hitachi_HTS547550A9E384_J2150050GJNN8C-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Dec 12 16:25 ata-Hitachi_HTS547550A9E384_J2150050GJNN8C-part5 -> ../../sdb5
lrwxrwxrwx 1 root root 9 Dec 12 16:39 ata-Hitachi_HTS547550A9E384_J21D0052GE461S -> ../../sdc
lrwxrwxrwx 1 root root 10 Dec 12 16:25 ata-Hitachi_HTS547550A9E384_J21D0052GE461S-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 Dec 12 16:39 ata-ST1000LM024_HN-M101MBB_S2ZPJ9ADB17016 -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 12 16:39 ata-ST1000LM024_HN-M101MBB_S2ZPJ9ADB17016-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 Dec 12 16:24 ata-hp_DVDRAM_GT31L_M00B6KC1526 -> ../../sr0
lrwxrwxrwx 1 root root 9 Dec 12 16:39 wwn-0x50004cf20ba68065 -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 12 16:39 wwn-0x50004cf20ba68065-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 Dec 12 16:39 wwn-0x5000cca640c79378 -> ../../sdb
lrwxrwxrwx 1 root root 10 Dec 12 16:25 wwn-0x5000cca640c79378-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Dec 12 16:25 wwn-0x5000cca640c79378-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Dec 12 16:25 wwn-0x5000cca640c79378-part5 -> ../../sdb5
lrwxrwxrwx 1 root root 9 Dec 12 16:39 wwn-0x5000cca642c5f892 -> ../../sdc
lrwxrwxrwx 1 root root 10 Dec 12 16:25 wwn-0x5000cca642c5f892-part1 -> ../../sdc1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 97f0c419-e318-4747-bb50-9704607aa617
else
search --no-floppy --fs-uuid --set=root 97f0c419-e318-4747-bb50-9704607aa617
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-97f0c419-e318-4747-bb50-9704607aa617' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 97f0c419-e318-4747-bb50-9704607aa617
else
search --no-floppy --fs-uuid --set=root 97f0c419-e318-4747-bb50-9704607aa617
fi
linux /boot/vmlinuz-3.19.0-39-generic root=UUID=97f0c419-e318-4747-bb50-9704607aa617 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.19.0-39-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-97f0c419-e318-4747-bb50-9704607aa617' {
menuentry 'Ubuntu, with Linux 3.19.0-39-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-39-generic-advanced-97f0c419-e318-4747-bb50-9704607aa617' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 97f0c419-e318-4747-bb50-9704607aa617
else
search --no-floppy --fs-uuid --set=root 97f0c419-e318-4747-bb50-9704607aa617
fi
echo 'Loading Linux 3.19.0-39-generic ...'
linux /boot/vmlinuz-3.19.0-39-generic root=UUID=97f0c419-e318-4747-bb50-9704607aa617 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.19.0-39-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-39-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-39-generic-recovery-97f0c419-e318-4747-bb50-9704607aa617' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 97f0c419-e318-4747-bb50-9704607aa617
else
search --no-floppy --fs-uuid --set=root 97f0c419-e318-4747-bb50-9704607aa617
fi
echo 'Loading Linux 3.19.0-39-generic ...'
linux /boot/vmlinuz-3.19.0-39-generic root=UUID=97f0c419-e318-4747-bb50-9704607aa617 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.19.0-39-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-advanced-97f0c419-e318-4747-bb50-9704607aa617' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 97f0c419-e318-4747-bb50-9704607aa617
else
search --no-floppy --fs-uuid --set=root 97f0c419-e318-4747-bb50-9704607aa617
fi
echo 'Loading Linux 3.19.0-25-generic ...'
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=97f0c419-e318-4747-bb50-9704607aa617 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.19.0-25-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-recovery-97f0c419-e318-4747-bb50-9704607aa617' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 97f0c419-e318-4747-bb50-9704607aa617
else
search --no-floppy --fs-uuid --set=root 97f0c419-e318-4747-bb50-9704607aa617
fi
echo 'Loading Linux 3.19.0-25-generic ...'
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=97f0c419-e318-4747-bb50-9704607aa617 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.19.0-25-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 97f0c419-e318-4747-bb50-9704607aa617
else
search --no-floppy --fs-uuid --set=root 97f0c419-e318-4747-bb50-9704607aa617
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 97f0c419-e318-4747-bb50-9704607aa617
else
search --no-floppy --fs-uuid --set=root 97f0c419-e318-4747-bb50-9704607aa617
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=97f0c419-e318-4747-bb50-9704607aa617 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=dc3baa49-1769-4ffd-a930-0723dafd4df1 none swap sw 0 0
--------------------------------------------------------------------------------
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdb2
00000000 3b 61 77 2d 7b ba 1b 96 12 97 d7 ab 3b c4 71 cc |;aw-{.......;.q.|
00000010 d8 2c 89 95 bb 8e b2 34 0b 7a da 15 db 94 29 05 |.,.....4.z....).|
00000020 72 17 2b ee 8b b4 4c d4 54 f6 ab 5f 26 c2 b2 59 |r.+...L.T.._&..Y|
00000030 5e d0 61 50 b1 ad 42 82 62 96 5d ac c5 9e a3 5e |^.aP..B.b.]....^|
00000040 a9 5b c3 5f 45 fc 13 d6 76 6c 8c f6 b7 cb d7 eb |.[._E...vl......|
00000050 74 8b b8 2b d2 60 c2 6d cb 27 16 b6 24 79 a2 35 |t..+.`.m.'..$y.5|
00000060 8d b5 f3 6c 7f 1c 82 d5 1b 4b 8c 74 c5 35 00 bc |...l.....K.t.5..|
00000070 ab b6 1d 34 e3 e0 cc ad b0 ab 4d de 37 2b a3 16 |...4......M.7+..|
00000080 c1 5c 57 5d 5d 98 54 c0 ff 3d d4 06 ba 24 2d bb |.\W]].T..=...$-.|
00000090 25 9b a4 d2 6c b2 4d c3 25 8b 80 6f c5 b9 62 5d |%...l.M.%..o..b]|
000000a0 98 b8 c6 52 20 00 b3 c6 de 39 2d 4b be a2 28 36 |...R ....9-K..(6|
000000b0 f5 3e f1 3e 8e 56 b0 55 71 82 0e 32 89 d3 fb 2e |.>.>.V.Uq..2....|
000000c0 98 e9 8c b7 98 25 ea e2 43 ae a3 38 b7 f1 98 61 |.....%..C..8...a|
000000d0 42 aa 29 5c e0 80 c6 aa 68 5c 6d b2 3a 1d 31 b4 |B.)\....h\m.:.1.|
000000e0 89 a3 46 9c ce 15 84 f8 39 b6 d3 ac 37 25 ec 1a |..F.....9...7%..|
000000f0 ac 17 1d 4a e6 ee 4c 2a 82 f1 d9 16 2e 3f 71 7d |...J..L*.....?q}|
00000100 b5 8e fe 82 51 61 5c ac ca e2 dd f5 14 53 cb fa |....Qa\......S..|
00000110 d6 0d b5 42 66 98 95 1a 40 ea d2 c0 96 98 69 b1 |...Bf...@.....i.|
00000120 a5 ce fe 63 19 fc fa 95 e3 2b d6 ec 2c f5 cc 36 |...c.....+..,..6|
00000130 ab f3 98 6b 9a 85 6c 5a ef 17 e9 17 18 6f 37 87 |...k..lZ.....o7.|
00000140 b2 d7 57 33 59 35 32 5c 4f ad ff d6 6a 78 15 55 |..W3Y52\O...jx.U|
00000150 03 aa a3 16 a6 6c 1b 83 97 61 6a 4f b4 ee bc 42 |.....l...ajO...B|
00000160 a6 c8 50 6c 53 1e 77 6c a2 0d 9a ec 14 e7 45 5a |..PlS.wl......EZ|
00000170 8d b6 50 99 67 b5 a6 48 09 ae bd 44 a0 92 aa 39 |..P.g..H...D...9|
00000180 69 6d 7a 36 87 fd f9 1c 40 35 56 a6 d0 1b 94 d6 |imz6....@5V.....|
00000190 cb c7 59 c2 5a 33 65 b4 ce a8 5c 2d a0 84 c6 40 |..Y.Z3e...\-...@|
000001a0 08 ae 35 bc 3a 85 73 f5 f6 22 a0 19 88 13 2a 26 |..5.:.s.."....*&|
000001b0 b1 d2 3f b2 6d ca 10 b9 09 ba cc 66 f9 2f 00 fe |..?.m......f./..|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 50 7e 00 00 00 |...........P~...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
cat: write error: Broken pipe
cat: write error: Broken pipe
File descriptor 9 (/proc/9808/mounts) leaked on lvs invocation. Parent PID 20938: bash
File descriptor 63 (pipe:[119671]) leaked on lvs invocation. Parent PID 20938: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2015-12-12__16h36 ===================
boot-repair version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-repair is executed in live-session (Ubuntu 14.04.3 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
ls: impossible d'accéder à /home/usr/.config: Aucun fichier ou dossier de ce type
Unmount sda1 from /media/ubuntu/Seagate Expansion Drive to avoid space incompatibilities
=================== os-prober:
/dev/sdb1:Ubuntu 14.04.3 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="Seagate Expansion Drive" UUID="E46032DC6032B560" TYPE="ntfs"
/dev/sdb1: UUID="97f0c419-e318-4747-bb50-9704607aa617" TYPE="ext4"
/dev/sdb5: UUID="dc3baa49-1769-4ffd-a930-0723dafd4df1" TYPE="swap"
/dev/sdc1: UUID="fa24b0a0-1d50-4cf2-acba-8fa53c0b762a" TYPE="ext4"
/dev/sr0: LABEL="Ubuntu 14.04.3 LTS amd64" TYPE="iso9660"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.
=================== sdb1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 déc. 11 07:00 grub.d
total 76
-rwxr-xr-x 1 root root 9424 juin 26 11:16 00_header
-rwxr-xr-x 1 root root 6058 mai 13 2015 05_debian_theme
-rwxr-xr-x 1 root root 11608 juin 26 11:16 10_linux
-rwxr-xr-x 1 root root 10412 juin 26 11:16 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin 26 11:16 30_os-prober
-rwxr-xr-x 1 root root 1416 juin 26 11:16 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juin 26 11:16 40_custom
-rwxr-xr-x 1 root root 216 juin 26 11:16 41_custom
-rw-r--r-- 1 root root 483 juin 26 11:16 README
=================== sdb1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sdb1recordfail=1/grub/grubenv :
recordfail=1
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sdb1 : sdb, not-sepboot, grubenv-ng grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sdb1.
sdc1 : sdc, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sdc1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
sdc : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: Seagate Expansion (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 583GB 583GB primary ntfs boot
Model: ATA Hitachi HTS54755 (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 496GB 496GB primary ext4 boot
2 496GB 500GB 4238MB extended
5 496GB 500GB 4238MB logical linux-swap(v1)
Model: ATA Hitachi HTS54755 (scsi)
Disk /dev/sdc: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 500GB 500GB primary ext4 boot
Error: Can't have a partition outside the disk!
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:msdos:Seagate Expansion;
1:1049kB:583GB:583GB:ntfs::boot;
BYT;
/dev/sdb:500GB:scsi:512:4096:msdos:ATA Hitachi HTS54755;
1:1049kB:496GB:496GB:ext4::boot;
2:496GB:500GB:4238MB:::;
5:496GB:500GB:4238MB:linux-swap(v1)::;
BYT;
/dev/sdc:500GB:scsi:512:4096:msdos:ATA Hitachi HTS54755;
1:1049kB:500GB:500GB:ext4::boot;
Error: Can't have a partition outside the disk!
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 931,5G Expansio
sda1 part ntfs 543,2G Seagate Expansion Drive
E46032DC6032B560
sdb disk 465,8G Hitachi
sdb1 part ext4 461,8G 97f0c419-e318-4747-bb50-9704607aa617
sdb2 part 1K
sdb5 part swap 4G dc3baa49-1769-4ffd-a930-0723dafd4df1
sdc disk 465,8G Hitachi
sdc1 part ext4 465,8G fa24b0a0-1d50-4cf2-acba-8fa53c0b762a
sr0 rom iso9660 1006M Ubuntu 14.04.3 LTS amd64
DVDRAM G
loop0 loop squashfs 962,1M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sdb 1 0 0 running
sdb1 1 0 0 /mnt/boot-sav/sdb1
sdb2 1 0 0
sdb5 1 0 0 [SWAP]
sdc 1 0 0 running
sdc1 1 0 0 /mnt/boot-sav/sdc1
sr0 1 0 1 running /cdrom
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlay (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb1 on /mnt/boot-sav/sdb1 type ext4 (rw)
/dev/sdc1 on /mnt/boot-sav/sdc1 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 sdb5 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fb1 fd freefall full fuse hidraw0 hidraw1 hidraw2 hpet i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-13 i2c-14 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 input kfd kmsg log mapper mcelog media0 mei0 mem memory_bandwidth net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdb2 sdb5 sdc sdc1 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 60 b5 e7 43 00 00 00 00 |........`..C....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 60 b5 32 60 dc 32 60 e4 |........`.2`.2`.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlay 2.0G 209M 1.8G 11% /
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 390M 1.4M 389M 1% /run
/dev/sr0 iso9660 1006M 1006M 0 100% /cdrom
/dev/loop0 squashfs 963M 963M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 2.0G 1.2M 2.0G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 2.0G 76K 2.0G 1% /run/shm
none tmpfs 100M 52K 100M 1% /run/user
/dev/sda1 fuseblk 544G 162G 382G 30% /mnt/boot-sav/sda1
/dev/sdb1 ext4 455G 4.5G 427G 2% /mnt/boot-sav/sdb1
/dev/sdc1 ext4 459G 15G 421G 4% /mnt/boot-sav/sdc1
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204885504 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525167 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 33553920 bytes
Disk identifier: 0x7d5128d5
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1139260775 569629364 7 HPFS/NTFS/exFAT
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x000cbdfd
Device Boot Start End Blocks Id System
/dev/sdb1 * 2048 968491007 484244480 83 Linux
/dev/sdb2 968493054 976771071 4139009 5 Extended
Partition 2 does not start on physical sector boundary.
/dev/sdb5 968493056 976771071 4139008 82 Linux swap / Solaris
Disk /dev/sdc: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x2b617f07
Device Boot Start End Blocks Id System
/dev/sdc1 * 2048 976771071 488384512 83 Linux
Partition outside the disk détecté.
Partition outside the disk détecté.
=================== Recommended repair
The default repair of the Boot-Repair utility will reinstall the grub2 of sdb1 into the MBRs of all disks (except USB without OS).
Additional repair will be performed: unhide-bootmenu-10s
Reinstall the GRUB of sdb1 into all MBRs of disks with OS or not-USB
*******lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:1659]
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
--
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (rev ff)
Kernel driver in use: radeon
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:1659]
*******
grub-install --version
grub-install (GRUB) 2.02~beta2-9ubuntu1.5,grub-install (GRUB) 2.
Reinstall the GRUB of sdb1 into the MBR of sda
Installing for i386-pc platform.
Installation finished. No error reported.
grub-install /dev/sda: exit code of grub-install /dev/sda:0
*******lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:1659]
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
--
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (rev ff)
Kernel driver in use: radeon
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:1659]
*******
grub-install --version
grub-install (GRUB) 2.02~beta2-9ubuntu1.5,grub-install (GRUB) 2.
Reinstall the GRUB of sdb1 into the MBR of sdc
Installing for i386-pc platform.
Installation finished. No error reported.
grub-install /dev/sdc: exit code of grub-install /dev/sdc:0
*******lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:1659]
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
--
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (rev ff)
Kernel driver in use: radeon
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:1659]
*******
grub-install --version
grub-install (GRUB) 2.02~beta2-9ubuntu1.5,grub-install (GRUB) 2.
Reinstall the GRUB of sdb1 into the MBR of sdb
Installing for i386-pc platform.
Installation finished. No error reported.
grub-install /dev/sdb: exit code of grub-install /dev/sdb:0
chroot /mnt/boot-sav/sdb1 update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.19.0-39-generic
Found initrd image: /boot/initrd.img-3.19.0-39-generic
Found linux image: /boot/vmlinuz-3.19.0-25-generic
Found initrd image: /boot/initrd.img-3.19.0-25-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Unhide GRUB boot menu in sdb1/boot/grub/grub.cfg
Le démarrage de l'ordinateur a été correctement réparé.
Vous pouvez maintenant redémarrer votre ordinateur.
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sdb (500GB) !
Je ne sais pas trop ce qui se passe. Pourrais-tu déconnecter tous les disques durs internes ou externes pour ne laisser que le disque dur qui contient Ubuntu et vérifier après cela si tu as toujours le même problème.
Dernière modification par malbo (Le 13/12/2015, à 06:30)
Hors ligne
#16 Le 12/12/2015, à 20:47
- Lebas
Re : [ Résolu] Démarrage
Comment déconnecter un disque dur interne? Je ne suis un spécialiste en informatique.
Hors ligne
#17 Le 12/12/2015, à 21:49
- Lebas
Re : [ Résolu] Démarrage
Cher Malbo, à la suite de ton dernier message et du mien qui en a suivi, je viens de rallumer, par trois fois, mon ordi en ayant au préalable enlever la prise usb du disque dur externe Seagate. L'ordi redémarre normalement. Comment cela peut-il se produire alors que j'ai le disque dur externe depuis quelques mois et que la plupart du temps l'ordi a toujours redémarré avec le disque dur externe branché?
Hors ligne
#18 Le 13/12/2015, à 06:43
- malbo
Re : [ Résolu] Démarrage
Dans ton Boot-Info que j'ai collé dans le post #15, on voit qu'il y a un chargeur d'amorçage de Grub dans le MBR du disque dur externe sda :
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub and uses an embedded config file:
---------------------------------------------------------------------------
search.fs_uuid 97f0c419-e318-4747-bb50-9704607aa617 root hd1,msdos1
set prefix=($root)'/boot/grub'
1376]
Je suppose que quand tu démarres l'ordi avec ce disque dur externe sda qui est branché, le démarrage s'effectue sur ce disque dur et pour une raison que je ne sais pas expliquer, ce type de démarrage ne fonctionne pas bien. Pour que tu n'aies plus d'ennuis, il faudrait que tu parviennes à régler ton Bios pour que la priorité de démarrage se fasse sur le disque dur interne sdb (celui dans lequel Ubuntu est installé) et non pas sur le disque dur externe. Si tu ne parviens pas à le faire, il faudra te résoudre à aller dans le Boot Menu au démarrage (pour y accéder il faut appuyer sur une certaine touche au démarrage qui dépend du fabricant de l'ordi : chez certains, c'est la touche F12, chez d'autres c'est la touche F9 ou peut-être la touche Echap) et quand tu seras dans ce Boot Menu, que tu sélectionnes ton disque dur interne sdb.
EDIT : je viens de trouver cet ancien post de la fin octobre 2015 qui montre l'état de ton installation à cette époque : http://forum.ubuntu-fr.org/viewtopic.ph … #p20859991
On peut y voir :
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
A cette époque, le démarrage sur ton disque externe ne pouvait pas se faire parce qu'il n'était pas bootable. La responsabilité de la situation actuelle, je pense qu'elle est partagée : c'est Boot-Repair qui a fait le sale boulot mais je pense que tu n'as pas su l'utiliser convenablement. Dans le Boot-Repair du post #15, on voit cet extrait qui montre que tu as accepté une réparation recommandée de Boot-Repair et que tu as ainsi laissé faire ce sale boulot :
Reinstall the GRUB of sdb1 into the MBR of sda
Installing for i386-pc platform.
Installation finished. No error reported.
grub-install /dev/sda: exit code of grub-install /dev/sda:0
Dernière modification par malbo (Le 13/12/2015, à 07:03)
Hors ligne
#19 Le 13/12/2015, à 08:40
- Lebas
Re : [ Résolu] Démarrage
Bonjour Malbo et encore merci pour ta disponibilité.
Je suis allé dans le boot menu, j'ai sélectionné le disque dur interne noté comme disque dur portable ( je n'ai pas de sda ou sdb notés) mais lorsque le disque dur externe est branché l'ordi ne démarre toujours pas.
Lorsque je le débranche et rallume l'ordi qui démarre alors normalement, j'ai ce message avant que le menu grub apparaisse :" une série de chiffre comme hier (0.78 92 12) puis APCI PCC Probe Failed".
Voilà mais comme noté plus haut le disque dur externe débranché permet le démarrage normal de l'ordi.
Hors ligne
#20 Le 13/12/2015, à 09:57
- malbo
Re : [ Résolu] Démarrage
Extrait du Boot-Info que j'ai collé dans le post #15 :
=================== parted -l:
Model: Seagate Expansion (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 583GB 583GB primary ntfs boot
Model: ATA Hitachi HTS54755 (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 496GB 496GB primary ext4 boot
2 496GB 500GB 4238MB extended
5 496GB 500GB 4238MB logical linux-swap(v1)
Model: ATA Hitachi HTS54755 (scsi)
Disk /dev/sdc: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 500GB 500GB primary ext4 boot
On y voit que ton disque dur externe sda répond au doux nom de "Seagate Expansion" alors que tes deux disques internes sdb et sdc devraient apparaître dans ton Boot Menu sous la désignation "HTS54755". Peux-tu vérifier si dans le Boot Menu tu as bien la possibilité de sélectionner le démarrage sur un ou deux disques désignés "HTS54755" ?
Hors ligne
#21 Le 13/12/2015, à 10:46
- Lebas
Re : [ Résolu] Démarrage
Il n'y a pas de HTS54755, c'est noté disque dur portable.
Hors ligne
#22 Le 13/12/2015, à 12:57
- malbo
Re : [ Résolu] Démarrage
Désolé mais je ne sais pas te proposer une solution pour l’instant.
Si ton ordi est un modèle acheté dans le commerce, pourrais-tu indiquer le nom COMPLET de son modèle et son fabricant ?
Dernière modification par malbo (Le 13/12/2015, à 12:59)
Hors ligne
#23 Le 13/12/2015, à 13:11
- Lebas
Re : [ Résolu] Démarrage
HP Pavillon dv7 Notebook
Mémoire 3,8 Gio
Processeur Intel® Core™ i7-2630QM CPU @ 2.00GHz × 8
Carte graphique Intel® Sandybridge Mobile
64 bits
Enfin concernant le post 19 ce n'est pas APCI mais ACPI qu'il faut lire.
Si tu n'as pas de solution ce n'est pas grave, l'ordi fonctionne malgré tout.
Je te renouvèle mes remerciements pour ta disponibilité, ta célérité et ta gentillesse.
Cordialement
Dernière modification par Lebas (Le 13/12/2015, à 15:43)
Hors ligne
#24 Le 13/12/2015, à 18:31
- malbo
Re : [ Résolu] Démarrage
Je pense que les deux disques durs HTS54755 étaient d'origine dans ton ordi HP Pavillon dv7. Si tu déconnectes le disque dur externe puis que tu démarres l'ordi en pressant la touche F9 au démarrage, normalement tu dois arriver dans le Boot Menu. Peux-tu décrire ce que tu vois dans ce Boot Menu ?
Hors ligne
#25 Le 13/12/2015, à 18:59
- Babdu89
Re : [ Résolu] Démarrage
Bonsoir.
HS.
@ malbo.
As tu un avis à donner dans ce sujet, Stp. Merci.
https://forum.ubuntu-fr.org/viewtopic.php?id=1959041
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne