#1 Le 02/03/2008, à 14:52
- julien.dekeghel
Problème avec synaptic
Le gestionnaire de paquets synaptic et le gestionnaire de mises à jour de mon PC sont bloqués, ils m' indique tous les deux le même message:
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.
E: _cache->open() failed, please report.
Après avoir entrer le mot de passe d' administration.
Comment faire?
Hors ligne
#2 Le 02/03/2008, à 14:58
- Sir Na Kraïou
Re : Problème avec synaptic
Salut,
tu fermes Synaptic, tu ouvres un terminal, dedans tu tapes
sudo dpkg --configure -a
tu copies tout ce que ça te renvoie
tu relances Synaptic et si ça ne fonctionne pas, tu colles ici ce que tu as précédemment copié.
Descendant de Charlemagne et de LUCA.
Bleu, en l'hommage d'un truc bleu. :'(
C'est pas du bleu.
C'est pas le lac de Genève, c'est le Lac Léman.
Hors ligne
#3 Le 02/03/2008, à 16:49
- julien.dekeghel
Re : Problème avec synaptic
J' ai un problème pendant l' opération:
J' ai entré la commande
julien@IBM-T22:~$ sudo dpkg --configure -a
Password:
Paramétrage de exim (3.36-18.2ubuntu1) ...
I can do some automatic configuration of your mail system, by asking
you a number of questions. Later you may have to confirm and/or correct
your answers. In any case, comprehensive information on configuring exim is
in the eximdoc package and in /usr/share/doc/exim/spec.txt
[---Press return---]
==============================================================================
You must choose one of the options below:
(1) Internet site; mail is sent and received directly using SMTP. If your
needs don't fit neatly into any category, you probably want to start
with this one and then edit the config file by hand.
(2) Internet site using smarthost: You receive Internet mail on this
machine, either directly by SMTP or by running a utility such as
fetchmail. Outgoing mail is sent using a smarthost. optionally with
addresses rewritten. This is probably what you want for a dialup
system.
(3) Satellite system: All mail is sent to another machine, called a "smart
host" for delivery. root and postmaster mail is delivered according
to /etc/aliases. No mail is received locally.
(4) Local delivery only: You are not on a network. Mail for local users
is delivered.
(5) No configuration: No configuration will be done now; your mail system
will be broken and should not be used. You must then do the
configuration yourself later or run this script, /usr/sbin/eximconfig,
as root. Look in /usr/share/doc/exim/example.conf.gz
Select a number from 1 to 5, from the list above.
Enter value (default=`4', `x' to restart): 2
==============================================================================
What is the `visible' mail name of your system? This will appear on
From: lines of outgoing messages.
Enter value (default=`IBM-T22', `x' to restart): julien@IBM-T22
This must conform to RFC1035's requirements.
Each component must start with an alphanum, end with an alphanum and contain
only alphanums and hyphens. Components must be separated by full stops.
Sorry, that value is not acceptable.
==============================================================================
What is the `visible' mail name of your system? This will appear on
From: lines of outgoing messages.
Enter value (default=`IBM-T22', `x' to restart):
==============================================================================
Does this system have any other names which may appear on incoming
mail messages, apart from the visible name above (IBM-T22) and
localhost?
By default all domains will be treated the same; if you want different
domain names to be treated differently, you will need to edit the config
file afterwards: see the documentation for the "domains" director
option.
If there are any more, enter them here, separated with spaces or commas.
If there are none, say `none'.
Enter value (default=`none', `x' to restart): none
==============================================================================
All mail from here or specified other local machines to anywhere on
the internet will be accepted, as will mail from anywhere on the
internet to here.
Are there any domains you want to relay mail for---that is, you are
prepared to accept mail for them from anywhere on the internet, but
they are not local domains.
If there are any, enter them here, separated with spaces or commas. You
can use wildcards. If there are none, say `none'. If you want to relay
mail for all domains that specify you as an MX, then say `mx'
Enter value (default=`none', `x' to restart): none
==============================================================================
Obviously, any machines that use us as a smarthost have to be excluded
from the relaying controls, as using us to relay mail for them is the
whole point.
Are there any networks of local machines you want to relay mail for?
If there are any, enter them here, separated with spaces or commas. You
should use the standard address/length format (e.g. 194.222.242.0/24)
If there are none, say `none'.
You need to double the colons in IPv6 addreses (e.g. 5f03::1200::836f::::/48)
Enter value (default=`none', `x' to restart): none
==============================================================================
Which machine will act as the smarthost and handle outgoing mail?
Enter value (`x' to restart): IBM-T22
That's silly. You can't send all mail back to
yourself!
==============================================================================
Which machine will act as the smarthost and handle outgoing mail?
Enter value (default=`IBM-T22', `x' to restart):
Qu' est ce qu' il veut? Y a-t-il une erreur?
Hors ligne
#4 Le 02/03/2008, à 18:52
- Sir Na Kraïou
Re : Problème avec synaptic
Ben il veut reparamétrer exim. Synaptic ne fonctionne pas, après ?
Descendant de Charlemagne et de LUCA.
Bleu, en l'hommage d'un truc bleu. :'(
C'est pas du bleu.
C'est pas le lac de Genève, c'est le Lac Léman.
Hors ligne
#5 Le 05/03/2008, à 19:01
- vilcoyot75
Re : Problème avec synaptic
Salut à toutes et à tous...
nouveau dans le monde de Ubuntu, j'ai le même problème que Julien, donc pas besoin de refaire un nouveau sujet...
par contre voici le message que j'ai quand je fais le sudo dpkg --configure -a :
acer@acer-portable:~$ sudo -s
[sudo] password for acer:
root@acer-portable:~# dpkg --configure -a
Paramétrage de libc6 (2.6.1-1ubuntu10) ...Processing triggers for libc6 ...
ldconfig deferred processing now taking place
Illegal instruction (core dumped)
dpkg: le sous-processus post-installation script a retourné une erreur de sortie d'état 132
étant nvice, j'avoue que c'est du chinois pour moi
j'ai cherché sur le net, mais très difficile d'avoir des infos sur ce problème en particulier...
j'espère ne pas flooder le sujet de Julien, et si on a le même problème, alors si ça peut sefvir à nous deux (et d'autres...) ??
des idées ?:)
d'ailleurs quand le lance Synaptic, j'ai le même message d'erreur que Julien
Synaptic se ferme ensuite...
Dernière modification par vilcoyot75 (Le 05/03/2008, à 19:06)
Hors ligne
#6 Le 05/03/2008, à 20:09
- julien.dekeghel
Re : Problème avec synaptic
Ça y est, ça fonctionne maintenant. Merci.
Hors ligne
#7 Le 05/03/2008, à 23:14
- vilcoyot75
Re : Problème avec synaptic
tu peux nous (enfin me) dire ce que tu as fait pour que ça marche ?
Hors ligne
#8 Le 06/03/2008, à 16:34
- julien.dekeghel
Re : Problème avec synaptic
Ben, j' ai entré la commande qu' on m' a indiquée, à savoir:
sudo dpkg --configure -a
Puis quand le terminal m' a demandé une option "network", j' ai répondu pas de réseau
(4). puis je me suis laissé guider.
Hors ligne
#9 Le 09/03/2008, à 22:42
- ogrellet
Re : Problème avec synaptic
J'ai le meme prob
impossible a resoudre:
olivier@olivier-desktop:~$ sudo dpkg --configure -a
Paramétrage de initramfs-tools (0.85eubuntu20) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-initrd-2.6.22.9-desktop-1mdv.img
Cannot find /lib/modules/initrd-2.6.22.9-desktop-1mdv.img
update-initramfs: failed for /boot/initrd.img-initrd-2.6.22.9-desktop-1mdv.img
dpkg: le sous-processus post-installation script a retourné une erreur de sortie d'état 1
et maintenant que faire???
merci