Pages : 1
#1 Le 16/03/2016, à 17:10
- windaube21
installation sur usb3.0 lent tres lent
bonjour a tous
je vous explique mon problème
j'ai fait une "live usb" avec liliusb sur windows en ubuntu 14.04
depuis le live j'ai installer ubuntu sur un disque usb externe et sur un clé usb scandisk
aucun souci sa boot bien ca va vite super !
la ou cela se complique cest quant j'ai acheter une ryval 16go usb 3.0 et 2.0 et aussi une verbatim 16go usb 3.0 et 2.0
l'installation se passe sans accros mais une fois sur le systeme sa rame mais sa rameeeeee
presque une minutes pour lancer firfox et a chaque modif les fenêtres devienne noir car elle semble ne pas répondre
j'ai essayer avec un ubuntu 15.04 et 14.04 et meme constat
le truk cest que ces clé sur windows elle tourne bien (16mo/s en écriture environs)
la seul explication logique que j'ai trouver est que mon DD externe et la scan disk sont des USB 2.0 simple
et que les deux qui ne vont pas sont en usb3.0 ( rétrocompatible usb2.0 d’après la pochette )
j'ai également essayer sur d'autre machine et le constat de vitesse est flagrante
bref ubuntu aime pas le USB 3.0 ?
merci de votre aide précieuse
Hors ligne
#2 Le 16/03/2016, à 17:17
- Sylv91
Re : installation sur usb3.0 lent tres lent
L'USB3 est normalement bien géré sous Linux, il te suffit de mesurer le débit pour savoir si tu es en USB2 ou USB3 (il y a une énorme différence entre les 2).
Depuis linux, en considérant que ta clé usb est sur /dev/sdc, tu lances cette commande :
sudo hdparm -t /dev/sdcet ça te donnera la vitesse lecture de ta clé (pas la vitesse d'écriture) mais ça te donnera clairement une indication si t'es en usb2 ou 3, donne nous le résultat obtenu et on te dira.
A noté : un disque dur avec sa propre alimentation (les 3.5 pouces) branché sur USB seront plus performant qu'une clé usb ou un petit disque dur externe auto-alimenté (2.5 pouces) sur ce même port usb.
cordialement;
Blague geek du mois : "Qu'avez vous pris comme bonne résolution cette année ? moi personnellement du 1920x1080".
Hors ligne
#3 Le 16/03/2016, à 17:23
- moko138
Re : installation sur usb3.0 lent tres lent
Ce serait aussi intéressant de voir
dmesget
sudo lshw%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#4 Le 16/03/2016, à 17:30
- windaube21
Re : installation sur usb3.0 lent tres lent
merci de la reponce rapide alor
sur uné clé USB "malade"
52 MB in 3.07 seconds = 16.91MB/secet sur la scandisk qui va bien
78 MB in 3.06 seconds = 25.50MB/secbon ok il y en a une qui va un poil plus vite mais 16mb seconde sa tourne deja
rien que en changeant de clé la il a fallu au moin 10 clik et bien 30 secondes pour avoir le menu déroulant ou ont peut choisir "éteindre.."
pour les deux autres commande il ya une ligne en particulier a regarder ? car sa me sort des pages tellement longue que je peu pas remonter jusqu'en au du terminal
Hors ligne
#5 Le 16/03/2016, à 18:37
- moko138
Re : installation sur usb3.0 lent tres lent
windaube21 a écrit :
pour les deux autres commande il ya une ligne en particulier a regarder ? car sa me sort des pages tellement longue que je peu pas remonter jusqu'en au du terminal
Menu Édition, "sélectionner tout", "Copier"
et tu mets tout ici. Ce sont tes lecteurs qui feront le tri 
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#6 Le 16/03/2016, à 18:44
- windaube21
Re : installation sur usb3.0 lent tres lent
Sur une clé "valide"
dmesg me donne
use it instead of the native driver
[ 16.467904] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x0000057b (\GPIO) (20141107/utaddress-258)
[ 16.467907] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.467908] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 16.488147] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[ 16.491841] acpi device:02: registered as cooling_device4
[ 16.491944] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[ 16.494905] cfg80211: Calling CRDA to update world regulatory domain
[ 16.512191] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 16.512194] Copyright(c) 2003- 2014 Intel Corporation
[ 16.512308] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 16.538290] [drm] Initialized drm 1.1.0 20060810
[ 16.553417] audit: type=1400 audit(1458141812.404:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=382 comm="apparmor_parser"
[ 16.553425] audit: type=1400 audit(1458141812.404:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=382 comm="apparmor_parser"
[ 16.553431] audit: type=1400 audit(1458141812.404:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=382 comm="apparmor_parser"
[ 16.554165] audit: type=1400 audit(1458141812.404:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=382 comm="apparmor_parser"
[ 16.554172] audit: type=1400 audit(1458141812.404:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=382 comm="apparmor_parser"
[ 16.554973] audit: type=1400 audit(1458141812.404:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=382 comm="apparmor_parser"
[ 16.571484] wmi: Mapper loaded
[ 16.583692] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[ 16.594201] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[ 16.646142] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[ 16.646964] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 16.656101] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[ 16.658987] checking generic (d1000000 130000) vs hw (c0000000 10000000)
[ 16.658992] checking generic (d1000000 130000) vs hw (d0000000 2000000)
[ 16.658993] fb: switching to nouveaufb from VESA VGA
[ 16.659019] Console: switching to colour dummy device 80x25
[ 16.662749] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.20
[ 16.664769] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 16.665258] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8500a2
[ 16.665261] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 16.665262] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 16.665402] input: Toshiba input device as /devices/virtual/input/input9
[ 16.668382] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 16.709072] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 16.709202] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 16.709205] nouveau [ VBIOS][0000:01:00.0] version 70.18.47.00.07
[ 16.712100] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 16.712139] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 16.712141] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 16.712142] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 16.715996] nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
[ 16.726171] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 16.799248] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 16.799253] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 16.799255] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 16.799258] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 16.799370] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 16.838269] toshiba_acpi: Illumination device not available
[ 16.845688] toshiba_acpi: Keyboard illumination not available
[ 16.846684] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 16.846687] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.846690] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 16.846692] sound hdaudioC0D0: mono: mono_out=0x0
[ 16.846694] sound hdaudioC0D0: inputs:
[ 16.846697] sound hdaudioC0D0: Internal Mic=0x19
[ 16.846699] sound hdaudioC0D0: Mic=0x18
[ 16.849444] toshiba_haps: Toshiba HDD Active Protection Sensor device
[ 16.849513] media: Linux media interface: v0.10
[ 16.865038] Linux video capture interface: v2.00
[ 16.882592] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 16.884213] cdc_acm 1-1.5:1.1: ttyACM0: USB ACM device
[ 16.889315] cdc_acm 1-1.5:1.3: ttyACM1: USB ACM device
[ 16.899969] cdc_acm 1-1.5:1.9: ttyACM2: USB ACM device
[ 16.906809] usbcore: registered new interface driver cdc_acm
[ 16.906812] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 16.918254] cdc_wdm 1-1.5:1.5: cdc-wdm0: USB WDM device
[ 16.920190] cdc_wdm 1-1.5:1.8: cdc-wdm1: USB WDM device
[ 16.920256] usbcore: registered new interface driver cdc_wdm
[ 16.926911] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 16.927002] uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b130)
[ 16.961340] toshiba_haps: HDD protection level set to: 2
[ 16.965885] cdc_ether 1-1.5:1.6 wwan0: register 'cdc_ether' at usb-0000:00:1a.0-1.5, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 16.965966] usbcore: registered new interface driver cdc_ether
[ 16.983896] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 16.999113] input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10
[ 16.999230] usbcore: registered new interface driver uvcvideo
[ 16.999232] USB Video Class driver (1.1.1)
[ 17.095345] cfg80211: World regulatory domain updated:
[ 17.095350] cfg80211: DFS Master region: unset
[ 17.095352] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 17.095355] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 17.095357] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 17.095360] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 17.095362] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 17.095364] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 17.119197] usb 1-1.6: new full-speed USB device number 7 using ehci-pci
[ 17.191200] usb 1-1.6: device descriptor read/64, error -32
[ 17.430990] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 17.460755] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 17.485728] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 17.485748] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 17.485787] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 17.505683] nouveau [ CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[ 17.505688] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 405 MHz
[ 17.505691] nouveau [ CLK][0000:01:00.0] 0f: core 535 MHz shader 1230 MHz memory 790 MHz
[ 17.505734] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 17.506026] [TTM] Zone kernel: Available graphics memory: 429482 kiB
[ 17.506027] [TTM] Zone highmem: Available graphics memory: 1996622 kiB
[ 17.506029] [TTM] Initializing pool allocator
[ 17.506034] [TTM] Initializing DMA pool allocator
[ 17.506045] nouveau [ DRM] VRAM: 512 MiB
[ 17.506046] nouveau [ DRM] GART: 1048576 MiB
[ 17.506050] nouveau [ DRM] TMDS table version 2.0
[ 17.506052] nouveau [ DRM] DCB version 4.0
[ 17.506054] nouveau [ DRM] DCB outp 00: 010003f3 00010035
[ 17.506055] nouveau [ DRM] DCB outp 01: 02811300 00000000
[ 17.506057] nouveau [ DRM] DCB outp 02: 02822362 00020010
[ 17.506058] nouveau [ DRM] DCB outp 03: 01833310 00000000
[ 17.506059] nouveau [ DRM] DCB outp 04: 088443c6 0f220010
[ 17.506061] nouveau [ DRM] DCB outp 05: 08844382 00020010
[ 17.506062] nouveau [ DRM] DCB conn 00: 00000040
[ 17.506063] nouveau [ DRM] DCB conn 01: 00000100
[ 17.506065] nouveau [ DRM] DCB conn 02: 00001231
[ 17.506066] nouveau [ DRM] DCB conn 03: 00000351
[ 17.506067] nouveau [ DRM] DCB conn 04: 00202446
[ 17.506075] nouveau [ DRM] BIOS FP mode: 1600x900 (97790kHz pixel clock)
[ 17.537594] nouveau W[ DRM] unknown connector type 51
[ 17.537985] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 17.537987] [drm] Driver supports precise vblank timestamp query.
[ 17.571542] init: failsafe main process (670) killed by TERM signal
[ 17.572871] nouveau [ DRM] MM: using COPY for buffer copies
[ 17.727483] audit: type=1400 audit(1458141813.580:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=728 comm="apparmor_parser"
[ 17.727493] audit: type=1400 audit(1458141813.580:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=728 comm="apparmor_parser"
[ 17.728131] audit: type=1400 audit(1458141813.580:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=728 comm="apparmor_parser"
[ 17.805327] audit: type=1400 audit(1458141813.656:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=786 comm="apparmor_parser"
[ 17.930999] Bluetooth: Core ver 2.20
[ 17.931019] NET: Registered protocol family 31
[ 17.931020] Bluetooth: HCI device and connection manager initialized
[ 17.931025] Bluetooth: HCI socket layer initialized
[ 17.931029] Bluetooth: L2CAP socket layer initialized
[ 17.931035] Bluetooth: SCO socket layer initialized
[ 17.937737] Bluetooth: RFCOMM TTY layer initialized
[ 17.937744] Bluetooth: RFCOMM socket layer initialized
[ 17.937749] Bluetooth: RFCOMM ver 1.11
[ 17.960978] init: cups main process (737) killed by HUP signal
[ 17.960989] init: cups main process ended, respawning
[ 17.992678] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.992682] Bluetooth: BNEP filters: protocol multicast
[ 17.992687] Bluetooth: BNEP socket layer initialized
[ 18.298379] usb 1-1.6: New USB device found, idVendor=0930, idProduct=0508
[ 18.298384] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 18.298387] usb 1-1.6: Product: EYSNJCSAX-A
[ 18.298390] usb 1-1.6: Manufacturer: TAIYO YUDEN
[ 18.311413] usbcore: registered new interface driver btusb
[ 18.552051] nouveau [ DRM] allocated 1600x900 fb: 0x70000, bo f05d3800
[ 18.552552] fbcon: nouveaufb (fb0) is primary device
[ 18.552668] Console: switching to colour frame buffer device 200x56
[ 18.552730] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 18.552732] nouveau 0000:01:00.0: registered panic notifier
[ 18.571346] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0
[ 18.571570] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 18.571580] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 18.587236] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 18.587407] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 18.951576] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.954734] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 18.954936] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 19.170860] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 19.171066] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 19.250667] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.392201] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 19.392320] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 19.392553] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 19.392961] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 22.408841] wlan0: authenticate with c8:cb:b8:a1:55:40
[ 22.441664] wlan0: send auth to c8:cb:b8:a1:55:40 (try 1/3)
[ 22.505885] wlan0: authenticated
[ 22.507782] wlan0: associate with c8:cb:b8:a1:55:40 (try 1/3)
[ 22.509135] wlan0: RX AssocResp from c8:cb:b8:a1:55:40 (capab=0x411 status=0 aid=3)
[ 22.512501] wlan0: associated
[ 22.512546] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.820416] init: plymouth-upstart-bridge main process ended, respawning
[ 22.828531] init: plymouth-upstart-bridge main process ended, respawning
[ 47.799916] audit_printk_skb: 150 callbacks suppressed
[ 47.799920] audit: type=1400 audit(1458141843.651:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2389 comm="apparmor_parser"
[ 47.799930] audit: type=1400 audit(1458141843.651:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2389 comm="apparmor_parser"
[ 47.800296] audit: type=1400 audit(1458141843.651:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2389 comm="apparmor_parser"
[ 47.896998] wlan0: authenticate with c8:cb:b8:a1:55:50
[ 47.929098] wlan0: send auth to c8:cb:b8:a1:55:50 (try 1/3)
[ 47.929548] cfg80211: Calling CRDA to update world regulatory domain
[ 47.931216] wlan0: authenticated
[ 47.931402] wlan0: waiting for beacon from c8:cb:b8:a1:55:50
[ 47.991036] cfg80211: World regulatory domain updated:
[ 47.991039] cfg80211: DFS Master region: unset
[ 47.991040] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 47.991042] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 47.991043] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 47.991044] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 47.991046] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 47.991047] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 47.998776] wlan0: associate with c8:cb:b8:a1:55:50 (try 1/3)
[ 48.002680] wlan0: RX AssocResp from c8:cb:b8:a1:55:50 (capab=0x431 status=0 aid=1)
[ 48.011114] wlan0: associated
[ 273.200910] sr 1:0:0:0: [sr0] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 273.200919] sr 1:0:0:0: [sr0] Sense Key : Hardware Error [current]
[ 273.200927] sr 1:0:0:0: [sr0] ASC=0x9 <<vendor>> ASCQ=0x90
[ 273.200930] sr 1:0:0:0: [sr0] CDB:
[ 273.200933] Read(10): 28 00 00 00 00 00 00 00 08 00
[ 273.200947] blk_update_request: I/O error, dev sr0, sector 0
[ 273.201040] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201058] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201069] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201079] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201089] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201098] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201111] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201119] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201147] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201158] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201166] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201174] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201181] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201187] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201194] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201201] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201213] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201220] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201227] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201234] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201240] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201247] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201254] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201260] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201270] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201277] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201283] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201290] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201297] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201303] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201310] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201316] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201326] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201333] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201340] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201346] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201353] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201360] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201366] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201373] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201393] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201400] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201407] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201414] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201420] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201427] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201433] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201440] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201450] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201457] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201464] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201471] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201477] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201484] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201490] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201497] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201507] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201514] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201520] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201527] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201534] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201540] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201547] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201553] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201573] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201580] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201587] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201594] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201600] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201607] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201614] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201620] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201634] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201641] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201648] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201654] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201661] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201668] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201674] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201681] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201691] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201698] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201704] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201711] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201718] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201724] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201731] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201737] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201747] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201754] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201761] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201767] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201774] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201780] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201787] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201794] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201804] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201811] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201817] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201824] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201830] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201837] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201844] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201850] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201860] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201867] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201874] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201880] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201887] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201894] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201900] sr 1:0:0:0: [sr0] unaligned transfer
[ 273.201907] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709337] sr 1:0:0:0: [sr0] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 311.709346] sr 1:0:0:0: [sr0] Sense Key : Hardware Error [current]
[ 311.709354] sr 1:0:0:0: [sr0] ASC=0x9 <<vendor>> ASCQ=0x90
[ 311.709357] sr 1:0:0:0: [sr0] CDB:
[ 311.709360] Read(10): 28 00 00 00 00 00 00 00 08 00
[ 311.709374] blk_update_request: I/O error, dev sr0, sector 0
[ 311.709419] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709437] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709449] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709459] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709469] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709478] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709488] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709497] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709528] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709535] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709541] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709546] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709551] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709555] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709559] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709563] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709570] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709575] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709579] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709582] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709586] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709590] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709594] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709598] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709604] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709608] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709612] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709616] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709620] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709624] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709628] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709632] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709637] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709642] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709646] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709649] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709653] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709657] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709661] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709665] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709678] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709682] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709686] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709690] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709694] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709698] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709702] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709706] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709712] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709716] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709720] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709724] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709728] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709732] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709736] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709740] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709746] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709750] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709754] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709758] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709762] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709766] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709769] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709773] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709785] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709789] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709794] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709798] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709802] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709806] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709810] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709814] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709822] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709827] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709831] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709835] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709838] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709842] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709846] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709850] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709856] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709861] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709864] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709868] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709872] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709876] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709880] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709884] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709890] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709894] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709898] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709902] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709906] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709910] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709914] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709918] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709924] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709928] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709932] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709936] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709940] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709944] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709948] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709952] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709958] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709962] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709966] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709970] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709974] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709978] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709982] sr 1:0:0:0: [sr0] unaligned transfer
[ 311.709986] sr 1:0:0:0: [sr0] unaligned transfer
[ 525.414207] audit: type=1400 audit(1458142321.393:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2839 comm="apparmor_parser"
[ 525.414216] audit: type=1400 audit(1458142321.393:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2839 comm="apparmor_parser"
[ 525.414692] audit: type=1400 audit(1458142321.397:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2839 comm="apparmor_parser"
vertige@vertige-pc:~$ et sudo lshw me donne
description: L2 cache
identifiant matériel: 33
emplacement: CPU Internal
taille: 256KiB
capacité: 256KiB
fonctionnalités: asynchronous internal write-back unified
*-cache:2
description: L1 cache
identifiant matériel: 34
emplacement: CPU Internal
taille: 32KiB
capacité: 32KiB
fonctionnalités: asynchronous internal write-back instruction
*-logicalcpu:0
description: CPU Logique
identifiant matériel: 5.1
fonctionnalités: logical
*-logicalcpu:1
description: CPU Logique
identifiant matériel: 5.2
fonctionnalités: logical
*-logicalcpu:2
description: CPU Logique
identifiant matériel: 5.3
fonctionnalités: logical
*-logicalcpu:3
description: CPU Logique
identifiant matériel: 5.4
fonctionnalités: logical
*-logicalcpu:4
description: CPU Logique
identifiant matériel: 5.5
fonctionnalités: logical
*-logicalcpu:5
description: CPU Logique
identifiant matériel: 5.6
fonctionnalités: logical
*-logicalcpu:6
description: CPU Logique
identifiant matériel: 5.7
fonctionnalités: logical
*-logicalcpu:7
description: CPU Logique
identifiant matériel: 5.8
fonctionnalités: logical
*-logicalcpu:8
description: CPU Logique
identifiant matériel: 5.9
fonctionnalités: logical
*-logicalcpu:9
description: CPU Logique
identifiant matériel: 5.a
fonctionnalités: logical
*-logicalcpu:10
description: CPU Logique
identifiant matériel: 5.b
fonctionnalités: logical
*-logicalcpu:11
description: CPU Logique
identifiant matériel: 5.c
fonctionnalités: logical
*-logicalcpu:12
description: CPU Logique
identifiant matériel: 5.d
fonctionnalités: logical
*-logicalcpu:13
description: CPU Logique
identifiant matériel: 5.e
fonctionnalités: logical
*-logicalcpu:14
description: CPU Logique
identifiant matériel: 5.f
fonctionnalités: logical
*-logicalcpu:15
description: CPU Logique
identifiant matériel: 5.10
fonctionnalités: logical
*-cache:3
description: L1 cache
identifiant matériel: 32
emplacement: CPU Internal
taille: 32KiB
capacité: 32KiB
fonctionnalités: asynchronous internal write-back data
*-memory
description: Mémoire Système
identifiant matériel: 35
emplacement: Carte mère
taille: 4GiB
*-bank:0
description: SODIMM DDR3 Synchrone 1067 MHz (0,9 ns)
produit: M471B5673FH0-CF8
fabriquant: Samsung
identifiant matériel: 0
numéro de série: 79E15EC6
emplacement: DIMM0
taille: 2GiB
bits: 64 bits
horloge: 1067MHz (0.9ns)
*-bank:1
description: SODIMM DDR3 Synchrone 1067 MHz (0,9 ns)
produit: M471B5673FH0-CF8
fabriquant: Samsung
identifiant matériel: 1
numéro de série: 771FF601
emplacement: DIMM2
taille: 2GiB
bits: 64 bits
horloge: 1067MHz (0.9ns)
*-pci:0
description: Host bridge
produit: Core Processor DRAM Controller
fabriquant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 02
bits: 32 bits
horloge: 33MHz
*-pci:0
description: PCI bridge
produit: Core Processor PCI Express x16 Root Port
fabriquant: Intel Corporation
identifiant matériel: 1
information bus: pci@0000:00:01.0
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:24 portE/S:3000(taille=4096) mémoire:d2000000-d30fffff portE/S:c0000000(taille=301989888)
*-display
description: VGA compatible controller
produit: GT218M [NVS 2100M]
fabriquant: NVIDIA Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: a2
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=0
ressources: irq:29 mémoire:d2000000-d2ffffff mémoire:c0000000-cfffffff mémoire:d0000000-d1ffffff portE/S:3000(taille=128) mémoire:d3080000-d30fffff
*-multimedia
description: Audio device
produit: High Definition Audio Controller
fabriquant: NVIDIA Corporation
identifiant matériel: 0.1
information bus: pci@0000:01:00.1
version: a1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:16 mémoire:d3000000-d3003fff
*-communication
description: Communication controller
produit: 5 Series/3400 Series Chipset HECI Controller
fabriquant: Intel Corporation
identifiant matériel: 16
information bus: pci@0000:00:16.0
version: 06
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=mei_me latency=0
ressources: irq:27 mémoire:d7328000-d732800f
*-network
description: Ethernet interface
produit: 82577LM Gigabit Network Connection
fabriquant: Intel Corporation
identifiant matériel: 19
information bus: pci@0000:00:19.0
nom logique: eth0
version: 06
numéro de série: 00:23:18:ed:af:89
capacité: 1Gbit/s
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=0.12-3 latency=0 link=no multicast=yes port=twisted pair
ressources: irq:26 mémoire:d7300000-d731ffff mémoire:d7325000-d7325fff portE/S:4020(taille=32)
*-usb:0
description: USB controller
produit: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
fabriquant: Intel Corporation
identifiant matériel: 1a
information bus: pci@0000:00:1a.0
version: 06
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:16 mémoire:d7327c00-d7327fff
*-multimedia
description: Audio device
produit: 5 Series/3400 Series Chipset High Definition Audio
fabriquant: Intel Corporation
identifiant matériel: 1b
information bus: pci@0000:00:1b.0
version: 06
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:30 mémoire:d7320000-d7323fff
*-pci:1
description: PCI bridge
produit: 5 Series/3400 Series Chipset PCI Express Root Port 1
fabriquant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: 06
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:16 portE/S:5000(taille=4096) mémoire:d7200000-d72fffff portE/S:d7500000(taille=2097152)
*-generic:0
description: SD Host controller
produit: MMC/SD Host Controller
fabriquant: Ricoh Co Ltd
identifiant matériel: 0
information bus: pci@0000:02:00.0
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: msi pm pciexpress bus_master cap_list
configuration: driver=sdhci-pci latency=0
ressources: irq:16 mémoire:d7200200-d72002ff
*-generic:1 NON-RÉCLAMÉ
description: System peripheral
produit: R5U2xx (R5U230 / R5U231 / R5U241) [Memory Stick Host Controller]
fabriquant: Ricoh Co Ltd
identifiant matériel: 0.1
information bus: pci@0000:02:00.1
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: msi pm pciexpress bus_master cap_list
configuration: latency=0
ressources: mémoire:d7200100-d72001ff
*-pci:2
description: PCI bridge
produit: 5 Series/3400 Series Chipset PCI Express Root Port 2
fabriquant: Intel Corporation
identifiant matériel: 1c.1
information bus: pci@0000:00:1c.1
version: 06
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:17 portE/S:6000(taille=4096) mémoire:d7100000-d71fffff portE/S:d7700000(taille=2097152)
*-network
description: Interface réseau sans fil
produit: Centrino Advanced-N 6200
fabriquant: Intel Corporation
identifiant matériel: 0
information bus: pci@0000:03:00.0
nom logique: wlan0
version: 35
numéro de série: 00:27:10:59:33:34
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=3.19.0-51-generic firmware=9.221.4.1 build 25532 ip=192.168.0.81 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
ressources: irq:28 mémoire:d7100000-d7101fff
*-pci:3
description: PCI bridge
produit: 5 Series/3400 Series Chipset PCI Express Root Port 3
fabriquant: Intel Corporation
identifiant matériel: 1c.2
information bus: pci@0000:00:1c.2
version: 06
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:18 portE/S:2000(taille=4096) mémoire:d5100000-d70fffff portE/S:d3100000(taille=33554432)
*-usb:1
description: USB controller
produit: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
fabriquant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: 06
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:23 mémoire:d7327800-d7327bff
*-pci:4
description: PCI bridge
produit: 82801 Mobile PCI Bridge
fabriquant: Intel Corporation
identifiant matériel: 1e
information bus: pci@0000:00:1e.0
version: a6
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci subtractive_decode bus_master cap_list
*-isa
description: ISA bridge
produit: QM57 Chipset LPC Interface Controller
fabriquant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 06
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
ressources: irq:0
*-storage
description: SATA controller
produit: 5 Series/3400 Series Chipset 6 port SATA AHCI Controller
fabriquant: Intel Corporation
identifiant matériel: 1f.2
information bus: pci@0000:00:1f.2
version: 06
bits: 32 bits
horloge: 66MHz
fonctionnalités: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
ressources: irq:25 portE/S:4048(taille=8) portE/S:405c(taille=4) portE/S:4040(taille=8) portE/S:4058(taille=4) portE/S:4000(taille=32) mémoire:d7327000-d73277ff
*-generic
description: Signal processing controller
produit: 5 Series/3400 Series Chipset Thermal Subsystem
fabriquant: Intel Corporation
identifiant matériel: 1f.6
information bus: pci@0000:00:1f.6
version: 06
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=intel ips latency=0
ressources: irq:18 mémoire:d7324000-d7324fff
*-pci:1
description: Host bridge
produit: Core Processor QuickPath Architecture Generic Non-core Registers
fabriquant: Intel Corporation
identifiant matériel: 101
information bus: pci@0000:ff:00.0
version: 02
bits: 32 bits
horloge: 33MHz
*-pci:2
description: Host bridge
produit: Core Processor QuickPath Architecture System Address Decoder
fabriquant: Intel Corporation
identifiant matériel: 102
information bus: pci@0000:ff:00.1
version: 02
bits: 32 bits
horloge: 33MHz
*-pci:3
description: Host bridge
produit: Core Processor QPI Link 0
fabriquant: Intel Corporation
identifiant matériel: 103
information bus: pci@0000:ff:02.0
version: 02
bits: 32 bits
horloge: 33MHz
*-pci:4
description: Host bridge
produit: 1st Generation Core i3/5/7 Processor QPI Physical 0
fabriquant: Intel Corporation
identifiant matériel: 104
information bus: pci@0000:ff:02.1
version: 02
bits: 32 bits
horloge: 33MHz
*-pci:5
description: Host bridge
produit: 1st Generation Core i3/5/7 Processor Reserved
fabriquant: Intel Corporation
identifiant matériel: 105
information bus: pci@0000:ff:02.2
version: 02
bits: 32 bits
horloge: 33MHz
*-pci:6
description: Host bridge
produit: 1st Generation Core i3/5/7 Processor Reserved
fabriquant: Intel Corporation
identifiant matériel: 106
information bus: pci@0000:ff:02.3
version: 02
bits: 32 bits
horloge: 33MHz
*-scsi:0
identifiant matériel: 1
nom logique: scsi1
fonctionnalités: emulated
*-cdrom
description: DVD-RAM writer
produit: DVD-RAM UJ890AS
fabriquant: MATSHITA
identifiant matériel: 0.0.0
information bus: scsi@1:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/sr0
version: 1.00
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=ready
*-medium
identifiant matériel: 0
nom logique: /dev/cdrom
*-scsi:1
identifiant matériel: 2
information bus: usb@1:1.3
nom logique: scsi6
fonctionnalités: emulated scsi-host
configuration: driver=usb-storage
*-disk
description: SCSI Disk
produit: Cruzer Blade
fabriquant: SanDisk
identifiant matériel: 0.0.0
information bus: scsi@6:0.0.0
nom logique: /dev/sda
version: 1.00
numéro de série: 4C530013061101103234
taille: 29GiB (32GB)
fonctionnalités: removable
configuration: ansiversion=6 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sda
taille: 29GiB (32GB)
fonctionnalités: partitioned partitioned:dos
configuration: signature=0004a97d
*-volume:0
description: Linux filesystem partition
fabriquant: Linux
identifiant matériel: 1
nom logique: /dev/sda1
nom logique: /boot
version: 1.0
numéro de série: 5513ad83-5a02-4d0a-ae2e-3fe18ef89247
taille: 243MiB
capacité: 243MiB
fonctionnalités: primary bootable extended_attributes ext2 initialized
configuration: filesystem=ext2 lastmountpoint=/boot modified=2016-03-16 16:23:33 mount.fstype=ext2 mount.options=rw,relatime mounted=2016-03-16 16:23:33 state=mounted
*-volume:1
description: Extended partition
identifiant matériel: 2
nom logique: /dev/sda2
taille: 29GiB
capacité: 29GiB
fonctionnalités: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux LVM Physical Volume partition
identifiant matériel: 5
nom logique: /dev/sda5
numéro de série: KT0vf0-Y2ST-RXi3-RLgt-6XOx-vqV4-x6A6YL
taille: 29GiB
capacité: 29GiB
fonctionnalités: multi lvm2
*-battery:0
description: Lithium Ion Battery
fabriquant: TOSHIBA
identifiant matériel: 1
version: **/**/****
numéro de série: 0000000000
emplacement: 1st Battery
*-battery:1
description: Lithium Ion Battery
fabriquant: TOSHIBA
identifiant matériel: 2
version: **/**/****
numéro de série: 0000000000
emplacement: 2nd Battery
*-power NON-RÉCLAMÉ
identifiant matériel: 3
capacité: 32768mWh
*-network DÉSACTIVÉ
description: Ethernet interface
identifiant matériel: 4
nom logique: wwan0
numéro de série: 02:80:37:ec:02:00
fonctionnalités: ethernet physical
configuration: broadcast=yes driver=cdc_ether driverversion=22-Aug-2005 firmware=Mobile Broadband Network Device link=no multicast=yes
vertige@vertige-pc:~$ je revien avec la clé malade et je vous met sa desuite
Hors ligne
#7 Le 16/03/2016, à 18:53
- windaube21
Re : installation sur usb3.0 lent tres lent
alor avec la clé "malade"
dmesg
rastaman@rastaman-weed:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-15-generic (buildd@tipua) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #15-Ubuntu SMP Thu Apr 16 23:32:01 UTC 2015 (Ubuntu 3.19.0-15.15-generic 3.19.3)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf0cffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0d0000-0x00000000bf0d01ff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf0d0200-0x00000000bf0d1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf0d2000-0x00000000bf1cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf1d0000-0x00000000bf1effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf1f0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: TOSHIBA TECRA S11/Portable PC, BIOS Version 2.60 07/29/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 4094MB, range: 2MB, type UC
[ 0.000000] reg 1, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 4GB, range: 1GB, type WB
[ 0.000000] total RAM covered: 4096M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 4GB, range: 1GB, type WB
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20000000-0x377fffff]
[ 0.000000] [mem 0x20000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01c52000, 0x01c52fff] PGTABLE
[ 0.000000] BRK [0x01c53000, 0x01c53fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35720000-0x36b87fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F0030 000014 (v00 TOSHIB)
[ 0.000000] ACPI: RSDT 0xBF1EF038 000050 (v01 TOSHIB A0076 00000002 01000013)
[ 0.000000] ACPI: FACP 0xBF1EE000 000081 (v02 TOSHIB A0076 00000002 LOHR 0000005F)
[ 0.000000] ACPI: DSDT 0xBF1DC000 009C56 (v02 TOSHIB A0076 20100729 INTL 20061109)
[ 0.000000] ACPI: FACS 0xBF15A000 000040
[ 0.000000] ACPI: HPET 0xBF1ED000 000038 (v01 TOSHIB A0076 00000001 LOHR 0000005F)
[ 0.000000] ACPI: APIC 0xBF1EC000 0000BC (v01 TOSHIB A0076 00000001 LOHR 0000005F)
[ 0.000000] ACPI: MCFG 0xBF1EB000 00003C (v01 TOSHIB A0076 00000001 LOHR 0000005F)
[ 0.000000] ACPI: ASF! 0xBF1EA000 0000A0 (v32 TOSHIB A0076 00000001 LOHR 0000005F)
[ 0.000000] ACPI: TCPA 0xBF1E9000 000032 (v02 TOSHIB A0076 00000000 LOHR 0000005F)
[ 0.000000] ACPI: BOOT 0xBF1E8000 000028 (v01 TOSHIB A0076 00000000 LOHR 0000005F)
[ 0.000000] ACPI: SLIC 0xBF1E7000 000176 (v01 TOSHIB A0076 00000000 LOHR 0000005F)
[ 0.000000] ACPI: SSDT 0xBF1DB000 0002A2 (v01 TOSHIB SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0xBF1D8000 00072A (v01 TOSHIB PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0xBF1D7000 000A10 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4100MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x37ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf0cffff]
[ 0.000000] node 0: [mem 0x00000000-0x37ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x37ffffff]
[ 0.000000] On node 0 totalpages: 1011821
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 2190 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 783570 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 17 pages/cpu @f6c4f000 s40320 r0 d29312 u69632
[ 0.000000] pcpu-alloc: s40320 r0 d29312 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1009591
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-15-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] CPU0 microcode updated early to revision 0x4, date = 2013-06-28
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:00138000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 3971232K/4047284K available (7108K kernel code, 709K rwdata, 2996K rodata, 888K init, 796K bss, 76052K reserved, 0K cma-reserved, 3134280K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1a93000 - 0xc1b71000 ( 888 kB)
.data : 0xc16f16b6 - 0xc1a91780 (3712 kB)
.text : 0xc1000000 - 0xc16f16b6 (7109 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:488 16
[ 0.000000] CPU 0 irqstacks, hard=f3838000 soft=f383a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2660.100 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.20 BogoMIPS (lpj=10640400)
[ 0.000030] pid_max: default: 32768 minimum: 301
[ 0.000034] ACPI: Core revision 20141107
[ 0.007407] ACPI: All ACPI Tables successfully acquired
[ 0.008411] Security Framework initialized
[ 0.008427] AppArmor: AppArmor initialized
[ 0.008428] Yama: becoming mindful.
[ 0.008464] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.008465] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.008626] Initializing cgroup subsys memory
[ 0.008631] Initializing cgroup subsys devices
[ 0.008634] Initializing cgroup subsys freezer
[ 0.008636] Initializing cgroup subsys net_cls
[ 0.008638] Initializing cgroup subsys blkio
[ 0.008639] Initializing cgroup subsys perf_event
[ 0.008641] Initializing cgroup subsys net_prio
[ 0.008643] Initializing cgroup subsys hugetlb
[ 0.008661] CPU: Physical Processor ID: 0
[ 0.008662] CPU: Processor Core ID: 0
[ 0.008666] mce: CPU supports 9 MCE banks
[ 0.008674] CPU0: Thermal monitoring handled by SMI
[ 0.008684] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009070] Freeing SMP alternatives memory: 32K (c1b71000 - c1b79000)
[ 0.010332] ftrace: allocating 29374 entries in 58 pages
[ 0.021925] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.022429] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062118] smpboot: CPU0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz (fam: 06, model: 25, stepping: 05)
[ 0.167177] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.167192] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.167194] ... version: 3
[ 0.167195] ... bit width: 48
[ 0.167195] ... generic registers: 4
[ 0.167196] ... value mask: 0000ffffffffffff
[ 0.167197] ... max period: 000000007fffffff
[ 0.167198] ... fixed-purpose events: 3
[ 0.167199] ... event mask: 000000070000000f
[ 0.167946] CPU 1 irqstacks, hard=f3998000 soft=f399a000
[ 0.167948] x86: Booting SMP configuration:
[ 0.167949] .... node #0, CPUs: #1
[ 0.178974] Initializing CPU#1
[ 0.179006] CPU1: Thermal monitoring handled by SMI
[ 0.181200] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.181292] CPU 2 irqstacks, hard=f3a72000 soft=f3a74000
[ 0.181294] #2
[ 0.192220] CPU2 microcode updated early to revision 0x4, date = 2013-06-28
[ 0.192221] Initializing CPU#2
[ 0.192249] CPU2: Thermal monitoring handled by SMI
[ 0.194435] CPU 3 irqstacks, hard=f3ad6000 soft=f3ad8000
[ 0.194439] #3
[ 0.205363] Initializing CPU#3
[ 0.205392] CPU3: Thermal monitoring handled by SMI
[ 0.207505] x86: Booted up 1 node, 4 CPUs
[ 0.207509] smpboot: Total of 4 processors activated (21280.80 BogoMIPS)
[ 0.210077] devtmpfs: initialized
[ 0.210377] evm: security.selinux
[ 0.210378] evm: security.SMACK64
[ 0.210379] evm: security.SMACK64EXEC
[ 0.210380] evm: security.SMACK64TRANSMUTE
[ 0.210381] evm: security.SMACK64MMAP
[ 0.210382] evm: security.ima
[ 0.210382] evm: security.capability
[ 0.210456] PM: Registering ACPI NVS region [mem 0xbf0d0000-0xbf0d01ff] (512 bytes)
[ 0.210458] PM: Registering ACPI NVS region [mem 0xbf0d2000-0xbf1cffff] (1040384 bytes)
[ 0.210624] pinctrl core: initialized pinctrl subsystem
[ 0.210732] RTC time: 16:45:31, date: 03/16/16
[ 0.210829] NET: Registered protocol family 16
[ 0.210997] EISA bus registered
[ 0.219168] cpuidle: using governor ladder
[ 0.230353] cpuidle: using governor menu
[ 0.230494] ACPI: bus type PCI registered
[ 0.230496] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.230570] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.230573] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.230574] PCI: Using MMCONFIG for extended config space
[ 0.230575] PCI: Using configuration type 1 for base access
[ 0.243614] ACPI: Added _OSI(Module Device)
[ 0.243616] ACPI: Added _OSI(Processor Device)
[ 0.243617] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.243618] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.245987] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.246910] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.248772] ACPI: Dynamic OEM Table Load:
[ 0.248779] ACPI: SSDT 0xF3B91000 0004A1 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.249180] ACPI: Dynamic OEM Table Load:
[ 0.249185] ACPI: SSDT 0xF3A80000 0008B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.250270] ACPI: Dynamic OEM Table Load:
[ 0.250275] ACPI: SSDT 0xF3A7A000 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.250687] ACPI: Dynamic OEM Table Load:
[ 0.250690] ACPI: SSDT 0xF3B74800 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.251442] ACPI: Interpreter enabled
[ 0.251451] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.251454] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.251466] ACPI: (supports S0 S3 S4 S5)
[ 0.251468] ACPI: Using IOAPIC for interrupt routing
[ 0.251490] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.255335] ACPI: Power Resource [PDOC] (off)
[ 0.258582] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.258587] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.258591] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.259139] PCI host bridge to bus 0000:00
[ 0.259142] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.259143] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.259145] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.259147] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.259148] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.259151] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.259153] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.259154] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.259156] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
[ 0.259163] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.259183] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.259260] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.259294] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.259400] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.259429] pci 0000:00:16.0: reg 0x10: [mem 0xd7328000-0xd732800f 64bit]
[ 0.259523] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.259620] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.259645] pci 0000:00:19.0: reg 0x10: [mem 0xd7300000-0xd731ffff]
[ 0.259656] pci 0000:00:19.0: reg 0x14: [mem 0xd7325000-0xd7325fff]
[ 0.259667] pci 0000:00:19.0: reg 0x18: [io 0x4020-0x403f]
[ 0.259754] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.260233] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.260281] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.260305] pci 0000:00:1a.0: reg 0x10: [mem 0xd7327c00-0xd7327fff]
[ 0.260417] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.260467] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.260513] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.260536] pci 0000:00:1b.0: reg 0x10: [mem 0xd7320000-0xd7323fff 64bit]
[ 0.260645] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.260696] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.260737] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.260843] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.260934] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.261039] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.261092] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.261132] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[ 0.261238] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.261290] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.261342] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.261366] pci 0000:00:1d.0: reg 0x10: [mem 0xd7327800-0xd7327bff]
[ 0.261474] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.261524] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.261564] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.261705] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.262323] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.262354] pci 0000:00:1f.2: reg 0x10: [io 0x4048-0x404f]
[ 0.262365] pci 0000:00:1f.2: reg 0x14: [io 0x405c-0x405f]
[ 0.262376] pci 0000:00:1f.2: reg 0x18: [io 0x4040-0x4047]
[ 0.262386] pci 0000:00:1f.2: reg 0x1c: [io 0x4058-0x405b]
[ 0.262397] pci 0000:00:1f.2: reg 0x20: [io 0x4000-0x401f]
[ 0.262407] pci 0000:00:1f.2: reg 0x24: [mem 0xd7327000-0xd73277ff]
[ 0.262475] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.262569] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.262596] pci 0000:00:1f.6: reg 0x10: [mem 0xd7324000-0xd7324fff 64bit]
[ 0.262801] pci 0000:01:00.0: [10de:0a6a] type 00 class 0x030000
[ 0.262816] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.262829] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.262842] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.262851] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.262860] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.262970] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 0.262984] pci 0000:01:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff]
[ 0.263131] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.263133] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.263135] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.263138] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.263268] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500
[ 0.263288] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.263300] pci 0000:02:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.263301] pci 0000:02:00.0: MMC cards are now supported by standard SDHCI controller
[ 0.263322] pci 0000:02:00.0: reg 0x10: [mem 0xd7200200-0xd72002ff]
[ 0.263500] pci 0000:02:00.0: supports D1 D2
[ 0.263501] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.263618] pci 0000:02:00.1: [1180:e230] type 00 class 0x088000
[ 0.263645] pci 0000:02:00.1: reg 0x10: [mem 0xd7200100-0xd72001ff]
[ 0.264259] pci 0000:02:00.1: supports D1 D2
[ 0.264260] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274415] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.274428] pci 0000:00:1c.0: bridge window [mem 0xd7200000-0xd72fffff]
[ 0.274556] pci 0000:03:00.0: [8086:422c] type 00 class 0x028000
[ 0.274600] pci 0000:03:00.0: reg 0x10: [mem 0xd7100000-0xd7101fff 64bit]
[ 0.274804] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.274845] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.282380] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.282392] pci 0000:00:1c.1: bridge window [mem 0xd7100000-0xd71fffff]
[ 0.282506] acpiphp: Slot [1] registered
[ 0.282512] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.282517] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.282521] pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd70fffff]
[ 0.282528] pci 0000:00:1c.2: bridge window [mem 0xd3100000-0xd50fffff 64bit pref]
[ 0.282616] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.282628] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.282630] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.282631] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.282633] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.282634] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.282636] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.282637] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.282639] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[ 0.282716] pci_bus 0000:00: on NUMA node 0
[ 0.282877] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.282924] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[ 0.282969] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.283015] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.283061] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 *6 7 10 12 14 15)
[ 0.283105] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.283149] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.283192] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.283364] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.283368] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.283371] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.283408] PCI host bridge to bus 0000:ff
[ 0.283409] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.283414] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.283455] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.283503] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.283544] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.283583] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.283622] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.283668] pci_bus 0000:ff: on NUMA node 0
[ 0.283984] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.284101] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.284103] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.284105] vgaarb: loaded
[ 0.284107] vgaarb: bridge control possible 0000:01:00.0
[ 0.284329] SCSI subsystem initialized
[ 0.284365] libata version 3.00 loaded.
[ 0.284390] ACPI: bus type USB registered
[ 0.284406] usbcore: registered new interface driver usbfs
[ 0.284415] usbcore: registered new interface driver hub
[ 0.284432] usbcore: registered new device driver usb
[ 0.284559] PCI: Using ACPI for IRQ routing
[ 0.294280] PCI: pci_cache_line_size set to 64 bytes
[ 0.294413] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.294415] e820: reserve RAM buffer [mem 0xbf0d0000-0xbfffffff]
[ 0.294517] NetLabel: Initializing
[ 0.294518] NetLabel: domain hash size = 128
[ 0.294519] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.294529] NetLabel: unlabeled traffic allowed by default
[ 0.294624] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.294629] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.296665] Switched to clocksource hpet
[ 0.303192] AppArmor: AppArmor Filesystem Enabled
[ 0.303267] pnp: PnP ACPI init
[ 0.303477] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.303479] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.303481] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.303483] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.303484] system 00:00: [mem 0xd7400000-0xd7400fff] has been reserved
[ 0.303486] system 00:00: [mem 0xfeb00000-0xfeb03fff] has been reserved
[ 0.303488] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.303489] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.303491] system 00:00: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.303493] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.303497] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303743] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.303821] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.303824] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.303864] system 00:03: [io 0x1000-0x100f] has been reserved
[ 0.303866] system 00:03: [io 0x1010-0x1013] has been reserved
[ 0.303868] system 00:03: [io 0xffff] has been reserved
[ 0.303870] system 00:03: [io 0x0400-0x047f] could not be reserved
[ 0.303872] system 00:03: [io 0x0500-0x053f] has been reserved
[ 0.303874] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303911] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.303913] system 00:04: [io 0x01e0-0x01e7] has been reserved
[ 0.303915] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303947] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.304132] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.304169] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.304193] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.304284] pnp: PnP ACPI: found 9 devices
[ 0.304288] PnPBIOS: Disabled by ACPI PNP
[ 0.341335] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.341354] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.341357] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.341368] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.341370] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.341390] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.341392] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.341393] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.341395] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.341405] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd7500000-0xd76fffff 64bit pref]
[ 0.341411] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd7700000-0xd78fffff 64bit pref]
[ 0.341413] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.341416] pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.341419] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[ 0.341421] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.341423] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.341426] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.341428] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.341431] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.341434] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.341440] pci 0000:00:1c.0: bridge window [mem 0xd7200000-0xd72fffff]
[ 0.341445] pci 0000:00:1c.0: bridge window [mem 0xd7500000-0xd76fffff 64bit pref]
[ 0.341452] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.341455] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
[ 0.341461] pci 0000:00:1c.1: bridge window [mem 0xd7100000-0xd71fffff]
[ 0.341466] pci 0000:00:1c.1: bridge window [mem 0xd7700000-0xd78fffff 64bit pref]
[ 0.341473] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.341476] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.341482] pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd70fffff]
[ 0.341486] pci 0000:00:1c.2: bridge window [mem 0xd3100000-0xd50fffff 64bit pref]
[ 0.341493] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.341507] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.341508] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.341510] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.341511] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.341513] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.341514] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.341516] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.341517] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xfeafffff]
[ 0.341519] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.341521] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.341522] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.341524] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.341525] pci_bus 0000:02: resource 1 [mem 0xd7200000-0xd72fffff]
[ 0.341527] pci_bus 0000:02: resource 2 [mem 0xd7500000-0xd76fffff 64bit pref]
[ 0.341529] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
[ 0.341530] pci_bus 0000:03: resource 1 [mem 0xd7100000-0xd71fffff]
[ 0.341532] pci_bus 0000:03: resource 2 [mem 0xd7700000-0xd78fffff 64bit pref]
[ 0.341533] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.341535] pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd70fffff]
[ 0.341536] pci_bus 0000:04: resource 2 [mem 0xd3100000-0xd50fffff 64bit pref]
[ 0.341538] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.341540] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.341542] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.341543] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.341544] pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.341546] pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.341547] pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.341549] pci_bus 0000:06: resource 11 [mem 0xc0000000-0xfeafffff]
[ 0.341575] NET: Registered protocol family 2
[ 0.341731] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.341743] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.341758] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.341774] TCP: reno registered
[ 0.341775] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.341780] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.341818] NET: Registered protocol family 1
[ 0.342387] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.342445] PCI: CLS 64 bytes, default 64
[ 0.342490] Trying to unpack rootfs image as initramfs...
[ 0.656482] Freeing initrd memory: 20896K (f5720000 - f6b88000)
[ 0.656597] Simple Boot Flag at 0x7c set to 0x1
[ 0.656847] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x4
[ 0.656853] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x4
[ 0.656857] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x4
[ 0.656864] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x4
[ 0.656940] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.656967] Scanning for low memory corruption every 60 seconds
[ 0.657356] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.657391] Initialise system trusted keyring
[ 0.657415] audit: initializing netlink subsys (disabled)
[ 0.657430] audit: type=2000 audit(1458146731.552:1): initialized
[ 0.657713] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.659125] zpool: loaded
[ 0.659127] zbud: loaded
[ 0.659210] VFS: Disk quotas dquot_6.5.2
[ 0.659244] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.659689] fuse init (API version 7.23)
[ 0.659850] Key type big_key registered
[ 0.660458] Key type asymmetric registered
[ 0.660461] Asymmetric key parser 'x509' registered
[ 0.660476] bounce: pool size: 64 pages
[ 0.660509] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.660559] io scheduler noop registered
[ 0.660562] io scheduler deadline registered (default)
[ 0.660596] io scheduler cfq registered
[ 0.661421] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.661436] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.661464] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.661466] vesafb: scrolling: redraw
[ 0.661467] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.661480] vesafb: framebuffer at 0xd1000000, mapped to 0xf8480000, using 1216k, total 1216k
[ 0.661566] Console: switching to colour frame buffer device 80x30
[ 0.661577] fb0: VESA VGA frame buffer device
[ 0.661591] intel_idle: MWAIT substates: 0x1120
[ 0.661592] intel_idle: v0.4 model 0x25
[ 0.661593] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.661831] ACPI: AC Adapter [ADP1] (on-line)
[ 0.661913] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.661917] ACPI: Power Button [PWRB]
[ 0.661953] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.661967] ACPI: Lid Switch [LID]
[ 0.662002] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.662004] ACPI: Power Button [PWRF]
[ 0.662404] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.662406] ACPI: Thermal Zone [TZ01] (92 C)
[ 0.662431] GHES: HEST is not enabled!
[ 0.662533] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.662707] ACPI: Battery Slot [BAT1] (battery present)
[ 0.662732] isapnp: Scanning for PnP cards...
[ 0.683212] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.685094] Linux agpgart interface v0.103
[ 0.685439] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
[ 0.744868] tpm_tis 00:01: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us
[ 0.804858] tpm_tis 00:01: Adjusting TPM timeout parameters.
[ 0.973821] isapnp: No Plug & Play device found
[ 1.584921] tpm_tis 00:01: TPM is disabled/deactivated (0x7)
[ 1.587438] brd: module loaded
[ 1.588143] loop: module loaded
[ 1.588340] libphy: Fixed MDIO Bus: probed
[ 1.588342] tun: Universal TUN/TAP device driver, 1.6
[ 1.588343] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.588390] PPP generic driver version 2.4.2
[ 1.588463] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.588468] ehci-pci: EHCI PCI platform driver
[ 1.588622] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.588628] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.588643] ehci-pci 0000:00:1a.0: debug port 2
[ 1.592562] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.592577] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd7327c00
[ 1.600810] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.600847] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.600849] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.600851] usb usb1: Product: EHCI Host Controller
[ 1.600852] usb usb1: Manufacturer: Linux 3.19.0-15-generic ehci_hcd
[ 1.600853] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.600960] hub 1-0:1.0: USB hub found
[ 1.600967] hub 1-0:1.0: 3 ports detected
[ 1.601210] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.601215] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.601229] ehci-pci 0000:00:1d.0: debug port 2
[ 1.605141] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.605154] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd7327800
[ 1.616817] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.616844] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.616845] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.616847] usb usb2: Product: EHCI Host Controller
[ 1.616848] usb usb2: Manufacturer: Linux 3.19.0-15-generic ehci_hcd
[ 1.616850] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.617002] hub 2-0:1.0: USB hub found
[ 1.617006] hub 2-0:1.0: 3 ports detected
[ 1.617108] ehci-platform: EHCI generic platform driver
[ 1.617116] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.617125] ohci-pci: OHCI PCI platform driver
[ 1.617136] ohci-platform: OHCI generic platform driver
[ 1.617143] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.617191] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.618565] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.618569] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.618687] mousedev: PS/2 mouse device common for all mice
[ 1.618871] rtc_cmos 00:05: RTC can wake from S4
[ 1.619007] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.619038] rtc_cmos 00:05: alarms up to one year, 242 bytes nvram, hpet irqs
[ 1.619046] i2c /dev entries driver
[ 1.619080] device-mapper: uevent: version 1.0.3
[ 1.619142] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 1.619161] platform eisa.0: Probing EISA bus 0
[ 1.619163] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.619164] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.619166] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.619167] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.619169] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.619170] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.619171] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.619173] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.619174] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.619176] platform eisa.0: EISA: Detected 0 cards
[ 1.619190] cpufreq-nforce2: No nForce2 chipset.
[ 1.619197] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.619205] PCCT header not found.
[ 1.619206] ACPI PCC probe failed.
[ 1.619293] TCP: cubic registered
[ 1.619388] NET: Registered protocol family 10
[ 1.619593] NET: Registered protocol family 17
[ 1.619603] Key type dns_resolver registered
[ 1.619802] Using IPI No-Shortcut mode
[ 1.620038] Loading compiled-in X.509 certificates
[ 1.622605] Loaded X.509 cert 'Magrathea: Glacier signing key: 9b23c11a9a02c71e89328f2ab21d0a23af16d7ed'
[ 1.622617] registered taskstats version 1
[ 1.624771] Key type trusted registered
[ 1.628595] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.629391] Key type encrypted registered
[ 1.629402] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.652881] tsc: Refined TSC clocksource calibration: 2659.997 MHz
[ 1.676942] tpm_tis 00:01: A TPM error (7) occurred attempting to read a pcr value
[ 1.676947] ima: No TPM chip found, activating TPM-bypass!
[ 1.676992] evm: HMAC attrs: 0x1
[ 1.677742] Magic number: 8:117:793
[ 1.677906] rtc_cmos 00:05: setting system clock to 2016-03-16 16:45:33 UTC (1458146733)
[ 1.678047] ACPI: Invalid _PSD:coord_type
[ 1.678064] ACPI: Invalid _PSD:coord_type
[ 1.678082] ACPI: Invalid _PSD:coord_type
[ 1.678096] ACPI: Invalid _PSD:coord_type
[ 1.678828] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.678830] EDD information not available.
[ 1.678892] PM: Hibernation image not present or could not be loaded.
[ 1.679194] Freeing unused kernel memory: 888K (c1a93000 - c1b71000)
[ 1.679261] Write protecting the kernel text: 7112k
[ 1.679402] Write protecting the kernel read-only data: 3000k
[ 1.679403] NX-protecting the kernel data: 5176k
[ 1.689045] random: systemd-udevd urandom read with 0 bits of entropy available
[ 1.714312] pps_core: LinuxPPS API ver. 1 registered
[ 1.714316] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.716661] sdhci: Secure Digital Host Controller Interface driver
[ 1.716663] sdhci: Copyright(c) Pierre Ossman
[ 1.719609] PTP clock support registered
[ 1.719787] ahci 0000:00:1f.2: version 3.0
[ 1.720003] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.720038] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x22 impl SATA mode
[ 1.720041] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 1.722153] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 1.722327] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.722334] sdhci-pci 0000:02:00.0: No vmmc regulator found
[ 1.722337] sdhci-pci 0000:02:00.0: No vqmmc regulator found
[ 1.723533] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 1.727767] scsi host0: ahci
[ 1.729875] scsi host1: ahci
[ 1.730480] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.730482] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 1.731678] scsi host2: ahci
[ 1.731878] scsi host3: ahci
[ 1.732025] scsi host4: ahci
[ 1.732171] scsi host5: ahci
[ 1.732226] ata1: DUMMY
[ 1.732229] ata2: SATA max UDMA/133 abar m2048@0xd7327000 port 0xd7327180 irq 25
[ 1.732230] ata3: DUMMY
[ 1.732231] ata4: DUMMY
[ 1.732232] ata5: DUMMY
[ 1.732235] ata6: SATA max UDMA/133 abar m2048@0xd7327000 port 0xd7327380 irq 25
[ 1.732536] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.905652] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:23:18:ed:af:89
[ 1.905655] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.905707] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: FFFFFF-0FF
[ 1.912948] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.928956] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.045666] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.045673] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.046180] hub 1-1:1.0: USB hub found
[ 2.046401] hub 1-1:1.0: 6 ports detected
[ 2.048892] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.050736] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 2.050741] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT1._SDD] (Node f389cc30), AE_NOT_FOUND (20141107/psparse-536)
[ 2.050753] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 2.050756] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT1._GTF] (Node f389cc48), AE_NOT_FOUND (20141107/psparse-536)
[ 2.050762] ata2.00: ATAPI: MATSHITADVD-RAM UJ890AS, 1.00, max UDMA/100
[ 2.053430] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 2.053439] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT1._SDD] (Node f389cc30), AE_NOT_FOUND (20141107/psparse-536)
[ 2.053463] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 2.053472] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT1._GTF] (Node f389cc48), AE_NOT_FOUND (20141107/psparse-536)
[ 2.053478] ata2.00: configured for UDMA/100
[ 2.060800] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890AS 1.00 PQ: 0 ANSI: 5
[ 2.061511] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.061517] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.061843] hub 2-1:1.0: USB hub found
[ 2.061938] hub 2-1:1.0: 8 ports detected
[ 2.079766] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.079771] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.080045] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.080126] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 2.317192] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[ 2.333256] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[ 2.396945] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.411682] usb 1-1.2: New USB device found, idVendor=08ff, idProduct=168b
[ 2.411689] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.411693] usb 1-1.2: Product: Fingerprint Sensor
[ 2.425932] usb 2-1.5: New USB device found, idVendor=0b97, idProduct=7761
[ 2.425938] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.426376] hub 2-1.5:1.0: USB hub found
[ 2.426482] hub 2-1.5:1.0: 4 ports detected
[ 2.481214] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 2.575089] usb 1-1.3: New USB device found, idVendor=18a5, idProduct=0302
[ 2.575096] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.575100] usb 1-1.3: Product: STORE N GO
[ 2.575104] usb 1-1.3: Manufacturer: Verbatim
[ 2.575107] usb 1-1.3: SerialNumber: 018000000002E975
[ 2.580981] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 2.581096] scsi host6: usb-storage 1-1.3:1.0
[ 2.581165] usbcore: registered new interface driver usb-storage
[ 2.584400] usbcore: registered new interface driver uas
[ 2.645217] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[ 2.653194] Switched to clocksource tsc
[ 2.697200] usb 2-1.5.2: new full-speed USB device number 4 using ehci-pci
[ 2.743449] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b130
[ 2.743456] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.743460] usb 1-1.4: Product: USB2.0 UVC WebCam
[ 2.743464] usb 1-1.4: Manufacturer: Chicony
[ 2.743467] usb 1-1.4: SerialNumber: CNA8155-000001
[ 2.790605] usb 2-1.5.2: New USB device found, idVendor=0b97, idProduct=7772
[ 2.790611] usb 2-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.790616] usb 2-1.5.2: Product: O2Micro CCID SC Reader
[ 2.790619] usb 2-1.5.2: Manufacturer: O2
[ 2.817266] usb 1-1.5: new high-speed USB device number 6 using ehci-pci
[ 2.913125] usb 1-1.5: New USB device found, idVendor=0930, idProduct=1311
[ 2.913132] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.913136] usb 1-1.5: Product: F3607gw
[ 2.913139] usb 1-1.5: Manufacturer: 0 F3607gw
[ 2.913143] usb 1-1.5: SerialNumber: 3564000300825090
[ 2.988000] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[ 3.003465] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
[ 3.582374] scsi 6:0:0:0: Direct-Access Verbatim STORE N GO 1.00 PQ: 0 ANSI: 2
[ 3.582889] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 3.583852] sd 6:0:0:0: [sda] 31299584 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 3.584797] sd 6:0:0:0: [sda] Write Protect is off
[ 3.584804] sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 3.585952] sd 6:0:0:0: [sda] No Caching mode page found
[ 3.585958] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 3.593389] sda: sda1 sda2 < sda5 >
[ 3.598125] sd 6:0:0:0: [sda] Attached SCSI removable disk
[ 4.080150] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.600666] systemd[1]: Inserted module 'autofs4'
[ 4.659264] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 4.659391] systemd[1]: Detected architecture x86.
[ 4.668245] systemd[1]: Set hostname to <rastaman-weed>.
[ 5.052612] systemd[1]: Reached target Encrypted Volumes.
[ 5.052623] systemd[1]: Starting Encrypted Volumes.
[ 5.052658] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.052665] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.052812] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.052822] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.052833] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.052839] systemd[1]: Starting Remote File Systems (Pre).
[ 5.052863] systemd[1]: Created slice Root Slice.
[ 5.052869] systemd[1]: Starting Root Slice.
[ 5.052896] systemd[1]: Listening on Journal Audit Socket.
[ 5.052902] systemd[1]: Starting Journal Audit Socket.
[ 5.052921] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.052927] systemd[1]: Starting fsck to fsckd communication Socket.
[ 5.052994] systemd[1]: Created slice User and Session Slice.
[ 5.053002] systemd[1]: Starting User and Session Slice.
[ 5.053024] systemd[1]: Listening on udev Control Socket.
[ 5.053030] systemd[1]: Starting udev Control Socket.
[ 5.053047] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.053053] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.053077] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.053083] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.053119] systemd[1]: Listening on Journal Socket.
[ 5.053141] systemd[1]: Starting Journal Socket.
[ 5.074190] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.074203] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.074230] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.074238] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.074260] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.074267] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.074340] systemd[1]: Created slice System Slice.
[ 5.074353] systemd[1]: Starting System Slice.
[ 5.074851] systemd[1]: Starting Nameserver information manager...
[ 5.075330] systemd[1]: Started Read required files in advance.
[ 5.075480] systemd[1]: Starting Read required files in advance...
[ 5.076034] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.076482] systemd[1]: Mounting Huge Pages File System...
[ 5.117421] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.117578] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.117588] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.117963] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.118416] systemd[1]: Starting Setup Virtual Console...
[ 5.119110] systemd[1]: Mounting Debug File System...
[ 5.119577] systemd[1]: Starting Uncomplicated firewall...
[ 5.119641] systemd[1]: Listening on udev Kernel Socket.
[ 5.119656] systemd[1]: Starting udev Kernel Socket.
[ 5.120221] systemd[1]: Starting udev Coldplug all Devices...
[ 5.120253] systemd[1]: Reached target Slices.
[ 5.120265] systemd[1]: Starting Slices.
[ 5.120895] systemd[1]: Started Braille Device Support.
[ 5.120954] systemd[1]: Starting Braille Device Support...
[ 5.121411] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 5.121509] systemd[1]: Created slice system-getty.slice.
[ 5.121519] systemd[1]: Starting system-getty.slice.
[ 5.121971] systemd[1]: Starting Increase datagram queue length...
[ 5.210825] systemd[1]: Starting Load Kernel Modules...
[ 5.211622] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.211828] systemd[1]: Started Setup Virtual Console.
[ 5.212307] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.266831] systemd[1]: Started Uncomplicated firewall.
[ 5.314350] systemd[1]: Mounted Huge Pages File System.
[ 5.314998] systemd[1]: Mounted Debug File System.
[ 5.315028] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.316587] systemd[1]: Started Increase datagram queue length.
[ 5.318404] systemd[1]: Started udev Coldplug all Devices.
[ 5.333143] systemd[1]: Starting udev Wait for Complete Device Initialization...
[ 5.333202] systemd[1]: Listening on Syslog Socket.
[ 5.333215] systemd[1]: Starting Syslog Socket.
[ 5.333678] systemd[1]: Starting Journal Service...
[ 5.338028] systemd[1]: Started Nameserver information manager.
[ 5.641785] lp: driver loaded but no devices found
[ 5.672639] ppdev: user-space parallel port driver
[ 5.710641] systemd[1]: Started Journal Service.
[ 5.949334] random: nonblocking pool is initialized
[ 8.246989] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[ 8.250561] acpi device:02: registered as cooling_device4
[ 8.250663] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[ 8.254873] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20141107/utaddress-258)
[ 8.254880] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.254884] ACPI Warning: SystemIO range 0x00000540-0x0000054f conflicts with OpRegion 0x00000500-0x0000057b (\GPIO) (20141107/utaddress-258)
[ 8.254888] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.254890] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x0000057b (\GPIO) (20141107/utaddress-258)
[ 8.254893] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.254895] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x0000057b (\GPIO) (20141107/utaddress-258)
[ 8.254899] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.254900] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.288351] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[ 8.288410] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 8.293594] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[ 8.293910] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 8.294316] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 8.307129] toshiba_haps: Toshiba HDD Active Protection Sensor device
[ 8.418148] toshiba_haps: HDD protection level set to: 2
[ 8.460029] wmi: Mapper loaded
[ 8.492771] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.526126] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.20
[ 8.526657] input: Toshiba input device as /devices/virtual/input/input9
[ 8.679504] cfg80211: Calling CRDA to update world regulatory domain
[ 8.698392] toshiba_acpi: Illumination device not available
[ 8.700875] toshiba_acpi: Keyboard illumination not available
[ 8.779348] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 8.779351] Copyright(c) 2003- 2014 Intel Corporation
[ 8.779490] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.871927] media: Linux media interface: v0.10
[ 8.879125] cdc_wdm 1-1.5:1.5: cdc-wdm0: USB WDM device
[ 8.879186] cdc_wdm 1-1.5:1.8: cdc-wdm1: USB WDM device
[ 8.879204] usbcore: registered new interface driver cdc_wdm
[ 8.879564] cdc_acm 1-1.5:1.1: ttyACM0: USB ACM device
[ 8.880923] cdc_acm 1-1.5:1.3: ttyACM1: USB ACM device
[ 8.883536] [drm] Initialized drm 1.1.0 20060810
[ 8.885408] cdc_acm 1-1.5:1.9: ttyACM2: USB ACM device
[ 8.889392] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[ 8.895197] usbcore: registered new interface driver cdc_acm
[ 8.895200] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8.917423] Linux video capture interface: v2.00
[ 8.933255] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[ 8.961625] usb 1-1.6: new full-speed USB device number 7 using ehci-pci
[ 9.009929] cdc_ether 1-1.5:1.6 wwan0: register 'cdc_ether' at usb-0000:00:1a.0-1.5, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 9.009952] usbcore: registered new interface driver cdc_ether
[ 9.046851] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 9.228911] uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b130)
[ 9.249975] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 9.250021] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 9.251037] input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10
[ 9.251104] usbcore: registered new interface driver uvcvideo
[ 9.251105] USB Video Class driver (1.1.1)
[ 9.344628] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.344632] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.344634] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 9.344635] sound hdaudioC0D0: mono: mono_out=0x0
[ 9.344636] sound hdaudioC0D0: inputs:
[ 9.344638] sound hdaudioC0D0: Internal Mic=0x19
[ 9.344640] sound hdaudioC0D0: Mic=0x18
[ 9.368198] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 9.374987] checking generic (d1000000 130000) vs hw (c0000000 10000000)
[ 9.374991] checking generic (d1000000 130000) vs hw (d0000000 2000000)
[ 9.374992] fb: switching to nouveaufb from VESA VGA
[ 9.375026] Console: switching to colour dummy device 80x25
[ 9.375379] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8500a2
[ 9.375382] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 9.375383] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 9.407835] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 9.407923] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 9.407926] nouveau [ VBIOS][0000:01:00.0] version 70.18.47.00.07
[ 9.408709] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 9.408747] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 9.408749] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 9.408750] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 9.411562] nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
[ 9.421181] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 9.421185] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 9.421187] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 9.421190] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 9.421253] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 9.455648] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 9.487970] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.488179] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.701657] cfg80211: World regulatory domain updated:
[ 9.701661] cfg80211: DFS Master region: unset
[ 9.701662] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.701664] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9.701666] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9.701667] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9.701669] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9.701670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9.996504] usb 1-1.6: New USB device found, idVendor=0930, idProduct=0508
[ 9.996508] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.996510] usb 1-1.6: Product: EYSNJCSAX-A
[ 9.996511] usb 1-1.6: Manufacturer: TAIYO YUDEN
[ 10.033697] Adding 4050940k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:4050940k FS
[ 10.081431] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 10.081449] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 10.081455] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 10.083838] Bluetooth: Core ver 2.20
[ 10.083851] NET: Registered protocol family 31
[ 10.083852] Bluetooth: HCI device and connection manager initialized
[ 10.083855] Bluetooth: HCI socket layer initialized
[ 10.083857] Bluetooth: L2CAP socket layer initialized
[ 10.083862] Bluetooth: SCO socket layer initialized
[ 10.084322] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 10.084419] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 10.084517] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 10.084600] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 10.097417] usbcore: registered new interface driver btusb
[ 10.101368] nouveau [ CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[ 10.101373] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 405 MHz
[ 10.101376] nouveau [ CLK][0000:01:00.0] 0f: core 535 MHz shader 1230 MHz memory 790 MHz
[ 10.101420] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 10.101683] [TTM] Zone kernel: Available graphics memory: 429384 kiB
[ 10.101684] [TTM] Zone highmem: Available graphics memory: 1996524 kiB
[ 10.101686] [TTM] Initializing pool allocator
[ 10.101691] [TTM] Initializing DMA pool allocator
[ 10.101701] nouveau [ DRM] VRAM: 512 MiB
[ 10.101702] nouveau [ DRM] GART: 1048576 MiB
[ 10.101706] nouveau [ DRM] TMDS table version 2.0
[ 10.101709] nouveau [ DRM] DCB version 4.0
[ 10.101711] nouveau [ DRM] DCB outp 00: 010003f3 00010035
[ 10.101712] nouveau [ DRM] DCB outp 01: 02811300 00000000
[ 10.101714] nouveau [ DRM] DCB outp 02: 02822362 00020010
[ 10.101715] nouveau [ DRM] DCB outp 03: 01833310 00000000
[ 10.101716] nouveau [ DRM] DCB outp 04: 088443c6 0f220010
[ 10.101718] nouveau [ DRM] DCB outp 05: 08844382 00020010
[ 10.101719] nouveau [ DRM] DCB conn 00: 00000040
[ 10.101721] nouveau [ DRM] DCB conn 01: 00000100
[ 10.101722] nouveau [ DRM] DCB conn 02: 00001231
[ 10.101723] nouveau [ DRM] DCB conn 03: 00000351
[ 10.101724] nouveau [ DRM] DCB conn 04: 00202446
[ 10.101733] nouveau [ DRM] BIOS FP mode: 1600x900 (97790kHz pixel clock)
[ 10.132895] nouveau W[ DRM] unknown connector type 51
[ 10.133099] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.133101] [drm] Driver supports precise vblank timestamp query.
[ 10.167236] nouveau [ DRM] MM: using COPY for buffer copies
[ 11.132789] nouveau [ DRM] allocated 1600x900 fb: 0x70000, bo f1080400
[ 11.132889] fbcon: nouveaufb (fb0) is primary device
[ 11.132961] Console: switching to colour frame buffer device 200x56
[ 11.132996] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 11.132997] nouveau 0000:01:00.0: registered panic notifier
[ 11.139781] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0
[ 17.403855] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 17.437663] systemd-journald[255]: Received request to flush runtime journal from PID 1
[ 17.508580] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 17.524431] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 17.623992] audit: type=1400 audit(1458146749.439:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=550 comm="apparmor_parser"
[ 17.624002] audit: type=1400 audit(1458146749.439:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=550 comm="apparmor_parser"
[ 17.626060] audit: type=1400 audit(1458146749.439:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=550 comm="apparmor_parser"
[ 17.626067] audit: type=1400 audit(1458146749.439:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=550 comm="apparmor_parser"
[ 17.626072] audit: type=1400 audit(1458146749.439:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=550 comm="apparmor_parser"
[ 17.626078] audit: type=1400 audit(1458146749.439:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=550 comm="apparmor_parser"
[ 17.637269] audit: type=1400 audit(1458146749.451:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=550 comm="apparmor_parser"
[ 17.637279] audit: type=1400 audit(1458146749.451:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=550 comm="apparmor_parser"
[ 17.637284] audit: type=1400 audit(1458146749.451:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=550 comm="apparmor_parser"
[ 17.637289] audit: type=1400 audit(1458146749.451:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=550 comm="apparmor_parser"
[ 17.751762] cgroup: new mount options do not match the existing superblock, will be ignored
[ 18.041605] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.041608] Bluetooth: BNEP filters: protocol multicast
[ 18.041612] Bluetooth: BNEP socket layer initialized
[ 18.047554] Bluetooth: RFCOMM TTY layer initialized
[ 18.047560] Bluetooth: RFCOMM socket layer initialized
[ 18.047565] Bluetooth: RFCOMM ver 1.11
[ 18.897377] cdc_wdm 1-1.5:1.5: wdm_int_callback - 0 bytes
[ 18.898380] cdc_wdm 1-1.5:1.8: wdm_int_callback - 0 bytes
[ 19.349636] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 19.356411] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 19.569914] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 19.576755] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 22.804615] wlan0: authenticate with c8:cb:b8:a1:55:50
[ 22.837604] wlan0: send auth to c8:cb:b8:a1:55:50 (try 1/3)
[ 22.840315] wlan0: authenticated
[ 22.840625] wlan0: waiting for beacon from c8:cb:b8:a1:55:50
[ 22.874899] wlan0: associate with c8:cb:b8:a1:55:50 (try 1/3)
[ 22.878657] wlan0: RX AssocResp from c8:cb:b8:a1:55:50 (capab=0x431 status=0 aid=1)
[ 22.887537] wlan0: associated
[ 39.114698] show_signal_msg: 36 callbacks suppressed
[ 39.114703] nm-applet[1210]: segfault at c ip 08075359 sp bfc710a4 error 4 in nm-applet[8048000+5d000]
rastaman@rastaman-weed:~$ et sudo lshw
rastaman@rastaman-weed:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-15-generic (buildd@tipua) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #15-Ubuntu SMP Thu Apr 16 23:32:01 UTC 2015 (Ubuntu 3.19.0-15.15-generic 3.19.3)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf0cffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0d0000-0x00000000bf0d01ff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf0d0200-0x00000000bf0d1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf0d2000-0x00000000bf1cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf1d0000-0x00000000bf1effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf1f0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: TOSHIBA TECRA S11/Portable PC, BIOS Version 2.60 07/29/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 4094MB, range: 2MB, type UC
[ 0.000000] reg 1, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 4GB, range: 1GB, type WB
[ 0.000000] total RAM covered: 4096M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 4GB, range: 1GB, type WB
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20000000-0x377fffff]
[ 0.000000] [mem 0x20000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01c52000, 0x01c52fff] PGTABLE
[ 0.000000] BRK [0x01c53000, 0x01c53fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35720000-0x36b87fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F0030 000014 (v00 TOSHIB)
[ 0.000000] ACPI: RSDT 0xBF1EF038 000050 (v01 TOSHIB A0076 00000002 01000013)
[ 0.000000] ACPI: FACP 0xBF1EE000 000081 (v02 TOSHIB A0076 00000002 LOHR 0000005F)
[ 0.000000] ACPI: DSDT 0xBF1DC000 009C56 (v02 TOSHIB A0076 20100729 INTL 20061109)
[ 0.000000] ACPI: FACS 0xBF15A000 000040
[ 0.000000] ACPI: HPET 0xBF1ED000 000038 (v01 TOSHIB A0076 00000001 LOHR 0000005F)
[ 0.000000] ACPI: APIC 0xBF1EC000 0000BC (v01 TOSHIB A0076 00000001 LOHR 0000005F)
[ 0.000000] ACPI: MCFG 0xBF1EB000 00003C (v01 TOSHIB A0076 00000001 LOHR 0000005F)
[ 0.000000] ACPI: ASF! 0xBF1EA000 0000A0 (v32 TOSHIB A0076 00000001 LOHR 0000005F)
[ 0.000000] ACPI: TCPA 0xBF1E9000 000032 (v02 TOSHIB A0076 00000000 LOHR 0000005F)
[ 0.000000] ACPI: BOOT 0xBF1E8000 000028 (v01 TOSHIB A0076 00000000 LOHR 0000005F)
[ 0.000000] ACPI: SLIC 0xBF1E7000 000176 (v01 TOSHIB A0076 00000000 LOHR 0000005F)
[ 0.000000] ACPI: SSDT 0xBF1DB000 0002A2 (v01 TOSHIB SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0xBF1D8000 00072A (v01 TOSHIB PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0xBF1D7000 000A10 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4100MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x37ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf0cffff]
[ 0.000000] node 0: [mem 0x00000000-0x37ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x37ffffff]
[ 0.000000] On node 0 totalpages: 1011821
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 2190 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 783570 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 17 pages/cpu @f6c4f000 s40320 r0 d29312 u69632
[ 0.000000] pcpu-alloc: s40320 r0 d29312 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1009591
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-15-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] CPU0 microcode updated early to revision 0x4, date = 2013-06-28
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:00138000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 3971232K/4047284K available (7108K kernel code, 709K rwdata, 2996K rodata, 888K init, 796K bss, 76052K reserved, 0K cma-reserved, 3134280K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1a93000 - 0xc1b71000 ( 888 kB)
.data : 0xc16f16b6 - 0xc1a91780 (3712 kB)
.text : 0xc1000000 - 0xc16f16b6 (7109 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:488 16
[ 0.000000] CPU 0 irqstacks, hard=f3838000 soft=f383a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2660.100 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.20 BogoMIPS (lpj=10640400)
[ 0.000030] pid_max: default: 32768 minimum: 301
[ 0.000034] ACPI: Core revision 20141107
[ 0.007407] ACPI: All ACPI Tables successfully acquired
[ 0.008411] Security Framework initialized
[ 0.008427] AppArmor: AppArmor initialized
[ 0.008428] Yama: becoming mindful.
[ 0.008464] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.008465] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.008626] Initializing cgroup subsys memory
[ 0.008631] Initializing cgroup subsys devices
[ 0.008634] Initializing cgroup subsys freezer
[ 0.008636] Initializing cgroup subsys net_cls
[ 0.008638] Initializing cgroup subsys blkio
[ 0.008639] Initializing cgroup subsys perf_event
[ 0.008641] Initializing cgroup subsys net_prio
[ 0.008643] Initializing cgroup subsys hugetlb
[ 0.008661] CPU: Physical Processor ID: 0
[ 0.008662] CPU: Processor Core ID: 0
[ 0.008666] mce: CPU supports 9 MCE banks
[ 0.008674] CPU0: Thermal monitoring handled by SMI
[ 0.008684] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009070] Freeing SMP alternatives memory: 32K (c1b71000 - c1b79000)
[ 0.010332] ftrace: allocating 29374 entries in 58 pages
[ 0.021925] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.022429] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062118] smpboot: CPU0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz (fam: 06, model: 25, stepping: 05)
[ 0.167177] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.167192] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.167194] ... version: 3
[ 0.167195] ... bit width: 48
[ 0.167195] ... generic registers: 4
[ 0.167196] ... value mask: 0000ffffffffffff
[ 0.167197] ... max period: 000000007fffffff
[ 0.167198] ... fixed-purpose events: 3
[ 0.167199] ... event mask: 000000070000000f
[ 0.167946] CPU 1 irqstacks, hard=f3998000 soft=f399a000
[ 0.167948] x86: Booting SMP configuration:
[ 0.167949] .... node #0, CPUs: #1
[ 0.178974] Initializing CPU#1
[ 0.179006] CPU1: Thermal monitoring handled by SMI
[ 0.181200] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.181292] CPU 2 irqstacks, hard=f3a72000 soft=f3a74000
[ 0.181294] #2
[ 0.192220] CPU2 microcode updated early to revision 0x4, date = 2013-06-28
[ 0.192221] Initializing CPU#2
[ 0.192249] CPU2: Thermal monitoring handled by SMI
[ 0.194435] CPU 3 irqstacks, hard=f3ad6000 soft=f3ad8000
[ 0.194439] #3
[ 0.205363] Initializing CPU#3
[ 0.205392] CPU3: Thermal monitoring handled by SMI
[ 0.207505] x86: Booted up 1 node, 4 CPUs
[ 0.207509] smpboot: Total of 4 processors activated (21280.80 BogoMIPS)
[ 0.210077] devtmpfs: initialized
[ 0.210377] evm: security.selinux
[ 0.210378] evm: security.SMACK64
[ 0.210379] evm: security.SMACK64EXEC
[ 0.210380] evm: security.SMACK64TRANSMUTE
[ 0.210381] evm: security.SMACK64MMAP
[ 0.210382] evm: security.ima
[ 0.210382] evm: security.capability
[ 0.210456] PM: Registering ACPI NVS region [mem 0xbf0d0000-0xbf0d01ff] (512 bytes)
[ 0.210458] PM: Registering ACPI NVS region [mem 0xbf0d2000-0xbf1cffff] (1040384 bytes)
[ 0.210624] pinctrl core: initialized pinctrl subsystem
[ 0.210732] RTC time: 16:45:31, date: 03/16/16
[ 0.210829] NET: Registered protocol family 16
[ 0.210997] EISA bus registered
[ 0.219168] cpuidle: using governor ladder
[ 0.230353] cpuidle: using governor menu
[ 0.230494] ACPI: bus type PCI registered
[ 0.230496] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.230570] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.230573] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.230574] PCI: Using MMCONFIG for extended config space
[ 0.230575] PCI: Using configuration type 1 for base access
[ 0.243614] ACPI: Added _OSI(Module Device)
[ 0.243616] ACPI: Added _OSI(Processor Device)
[ 0.243617] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.243618] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.245987] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.246910] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.248772] ACPI: Dynamic OEM Table Load:
[ 0.248779] ACPI: SSDT 0xF3B91000 0004A1 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.249180] ACPI: Dynamic OEM Table Load:
[ 0.249185] ACPI: SSDT 0xF3A80000 0008B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.250270] ACPI: Dynamic OEM Table Load:
[ 0.250275] ACPI: SSDT 0xF3A7A000 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.250687] ACPI: Dynamic OEM Table Load:
[ 0.250690] ACPI: SSDT 0xF3B74800 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.251442] ACPI: Interpreter enabled
[ 0.251451] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.251454] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.251466] ACPI: (supports S0 S3 S4 S5)
[ 0.251468] ACPI: Using IOAPIC for interrupt routing
[ 0.251490] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.255335] ACPI: Power Resource [PDOC] (off)
[ 0.258582] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.258587] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.258591] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.259139] PCI host bridge to bus 0000:00
[ 0.259142] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.259143] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.259145] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.259147] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.259148] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.259151] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.259153] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.259154] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.259156] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
[ 0.259163] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.259183] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.259260] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.259294] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.259400] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.259429] pci 0000:00:16.0: reg 0x10: [mem 0xd7328000-0xd732800f 64bit]
[ 0.259523] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.259620] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.259645] pci 0000:00:19.0: reg 0x10: [mem 0xd7300000-0xd731ffff]
[ 0.259656] pci 0000:00:19.0: reg 0x14: [mem 0xd7325000-0xd7325fff]
[ 0.259667] pci 0000:00:19.0: reg 0x18: [io 0x4020-0x403f]
[ 0.259754] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.260233] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.260281] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.260305] pci 0000:00:1a.0: reg 0x10: [mem 0xd7327c00-0xd7327fff]
[ 0.260417] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.260467] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.260513] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.260536] pci 0000:00:1b.0: reg 0x10: [mem 0xd7320000-0xd7323fff 64bit]
[ 0.260645] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.260696] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.260737] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.260843] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.260934] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.261039] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.261092] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.261132] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[ 0.261238] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.261290] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.261342] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.261366] pci 0000:00:1d.0: reg 0x10: [mem 0xd7327800-0xd7327bff]
[ 0.261474] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.261524] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.261564] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.261705] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.262323] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.262354] pci 0000:00:1f.2: reg 0x10: [io 0x4048-0x404f]
[ 0.262365] pci 0000:00:1f.2: reg 0x14: [io 0x405c-0x405f]
[ 0.262376] pci 0000:00:1f.2: reg 0x18: [io 0x4040-0x4047]
[ 0.262386] pci 0000:00:1f.2: reg 0x1c: [io 0x4058-0x405b]
[ 0.262397] pci 0000:00:1f.2: reg 0x20: [io 0x4000-0x401f]
[ 0.262407] pci 0000:00:1f.2: reg 0x24: [mem 0xd7327000-0xd73277ff]
[ 0.262475] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.262569] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.262596] pci 0000:00:1f.6: reg 0x10: [mem 0xd7324000-0xd7324fff 64bit]
[ 0.262801] pci 0000:01:00.0: [10de:0a6a] type 00 class 0x030000
[ 0.262816] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.262829] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.262842] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.262851] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.262860] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.262970] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 0.262984] pci 0000:01:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff]
[ 0.263131] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.263133] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.263135] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.263138] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.263268] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500
[ 0.263288] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.263300] pci 0000:02:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.263301] pci 0000:02:00.0: MMC cards are now supported by standard SDHCI controller
[ 0.263322] pci 0000:02:00.0: reg 0x10: [mem 0xd7200200-0xd72002ff]
[ 0.263500] pci 0000:02:00.0: supports D1 D2
[ 0.263501] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.263618] pci 0000:02:00.1: [1180:e230] type 00 class 0x088000
[ 0.263645] pci 0000:02:00.1: reg 0x10: [mem 0xd7200100-0xd72001ff]
[ 0.264259] pci 0000:02:00.1: supports D1 D2
[ 0.264260] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274415] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.274428] pci 0000:00:1c.0: bridge window [mem 0xd7200000-0xd72fffff]
[ 0.274556] pci 0000:03:00.0: [8086:422c] type 00 class 0x028000
[ 0.274600] pci 0000:03:00.0: reg 0x10: [mem 0xd7100000-0xd7101fff 64bit]
[ 0.274804] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.274845] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.282380] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.282392] pci 0000:00:1c.1: bridge window [mem 0xd7100000-0xd71fffff]
[ 0.282506] acpiphp: Slot [1] registered
[ 0.282512] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.282517] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.282521] pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd70fffff]
[ 0.282528] pci 0000:00:1c.2: bridge window [mem 0xd3100000-0xd50fffff 64bit pref]
[ 0.282616] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.282628] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.282630] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.282631] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.282633] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.282634] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.282636] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.282637] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.282639] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[ 0.282716] pci_bus 0000:00: on NUMA node 0
[ 0.282877] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.282924] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[ 0.282969] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.283015] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.283061] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 *6 7 10 12 14 15)
[ 0.283105] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.283149] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.283192] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.283364] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.283368] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.283371] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.283408] PCI host bridge to bus 0000:ff
[ 0.283409] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.283414] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.283455] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.283503] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.283544] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.283583] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.283622] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.283668] pci_bus 0000:ff: on NUMA node 0
[ 0.283984] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.284101] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.284103] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.284105] vgaarb: loaded
[ 0.284107] vgaarb: bridge control possible 0000:01:00.0
[ 0.284329] SCSI subsystem initialized
[ 0.284365] libata version 3.00 loaded.
[ 0.284390] ACPI: bus type USB registered
[ 0.284406] usbcore: registered new interface driver usbfs
[ 0.284415] usbcore: registered new interface driver hub
[ 0.284432] usbcore: registered new device driver usb
[ 0.284559] PCI: Using ACPI for IRQ routing
[ 0.294280] PCI: pci_cache_line_size set to 64 bytes
[ 0.294413] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.294415] e820: reserve RAM buffer [mem 0xbf0d0000-0xbfffffff]
[ 0.294517] NetLabel: Initializing
[ 0.294518] NetLabel: domain hash size = 128
[ 0.294519] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.294529] NetLabel: unlabeled traffic allowed by default
[ 0.294624] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.294629] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.296665] Switched to clocksource hpet
[ 0.303192] AppArmor: AppArmor Filesystem Enabled
[ 0.303267] pnp: PnP ACPI init
[ 0.303477] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.303479] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.303481] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.303483] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.303484] system 00:00: [mem 0xd7400000-0xd7400fff] has been reserved
[ 0.303486] system 00:00: [mem 0xfeb00000-0xfeb03fff] has been reserved
[ 0.303488] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.303489] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.303491] system 00:00: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.303493] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.303497] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303743] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.303821] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.303824] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.303864] system 00:03: [io 0x1000-0x100f] has been reserved
[ 0.303866] system 00:03: [io 0x1010-0x1013] has been reserved
[ 0.303868] system 00:03: [io 0xffff] has been reserved
[ 0.303870] system 00:03: [io 0x0400-0x047f] could not be reserved
[ 0.303872] system 00:03: [io 0x0500-0x053f] has been reserved
[ 0.303874] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303911] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.303913] system 00:04: [io 0x01e0-0x01e7] has been reserved
[ 0.303915] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303947] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.304132] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.304169] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.304193] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.304284] pnp: PnP ACPI: found 9 devices
[ 0.304288] PnPBIOS: Disabled by ACPI PNP
[ 0.341335] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.341354] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.341357] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.341368] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.341370] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.341390] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.341392] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.341393] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.341395] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.341405] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd7500000-0xd76fffff 64bit pref]
[ 0.341411] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd7700000-0xd78fffff 64bit pref]
[ 0.341413] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.341416] pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.341419] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[ 0.341421] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.341423] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.341426] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.341428] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.341431] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.341434] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.341440] pci 0000:00:1c.0: bridge window [mem 0xd7200000-0xd72fffff]
[ 0.341445] pci 0000:00:1c.0: bridge window [mem 0xd7500000-0xd76fffff 64bit pref]
[ 0.341452] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.341455] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
[ 0.341461] pci 0000:00:1c.1: bridge window [mem 0xd7100000-0xd71fffff]
[ 0.341466] pci 0000:00:1c.1: bridge window [mem 0xd7700000-0xd78fffff 64bit pref]
[ 0.341473] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.341476] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.341482] pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd70fffff]
[ 0.341486] pci 0000:00:1c.2: bridge window [mem 0xd3100000-0xd50fffff 64bit pref]
[ 0.341493] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.341507] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.341508] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.341510] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.341511] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.341513] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.341514] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.341516] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.341517] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xfeafffff]
[ 0.341519] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.341521] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.341522] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.341524] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.341525] pci_bus 0000:02: resource 1 [mem 0xd7200000-0xd72fffff]
[ 0.341527] pci_bus 0000:02: resource 2 [mem 0xd7500000-0xd76fffff 64bit pref]
[ 0.341529] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
[ 0.341530] pci_bus 0000:03: resource 1 [mem 0xd7100000-0xd71fffff]
[ 0.341532] pci_bus 0000:03: resource 2 [mem 0xd7700000-0xd78fffff 64bit pref]
[ 0.341533] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.341535] pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd70fffff]
[ 0.341536] pci_bus 0000:04: resource 2 [mem 0xd3100000-0xd50fffff 64bit pref]
[ 0.341538] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.341540] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.341542] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.341543] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.341544] pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.341546] pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.341547] pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.341549] pci_bus 0000:06: resource 11 [mem 0xc0000000-0xfeafffff]
[ 0.341575] NET: Registered protocol family 2
[ 0.341731] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.341743] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.341758] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.341774] TCP: reno registered
[ 0.341775] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.341780] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.341818] NET: Registered protocol family 1
[ 0.342387] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.342445] PCI: CLS 64 bytes, default 64
[ 0.342490] Trying to unpack rootfs image as initramfs...
[ 0.656482] Freeing initrd memory: 20896K (f5720000 - f6b88000)
[ 0.656597] Simple Boot Flag at 0x7c set to 0x1
[ 0.656847] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x4
[ 0.656853] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x4
[ 0.656857] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x4
[ 0.656864] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x4
[ 0.656940] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.656967] Scanning for low memory corruption every 60 seconds
[ 0.657356] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.657391] Initialise system trusted keyring
[ 0.657415] audit: initializing netlink subsys (disabled)
[ 0.657430] audit: type=2000 audit(1458146731.552:1): initialized
[ 0.657713] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.659125] zpool: loaded
[ 0.659127] zbud: loaded
[ 0.659210] VFS: Disk quotas dquot_6.5.2
[ 0.659244] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.659689] fuse init (API version 7.23)
[ 0.659850] Key type big_key registered
[ 0.660458] Key type asymmetric registered
[ 0.660461] Asymmetric key parser 'x509' registered
[ 0.660476] bounce: pool size: 64 pages
[ 0.660509] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.660559] io scheduler noop registered
[ 0.660562] io scheduler deadline registered (default)
[ 0.660596] io scheduler cfq registered
[ 0.661421] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.661436] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.661464] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.661466] vesafb: scrolling: redraw
[ 0.661467] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.661480] vesafb: framebuffer at 0xd1000000, mapped to 0xf8480000, using 1216k, total 1216k
[ 0.661566] Console: switching to colour frame buffer device 80x30
[ 0.661577] fb0: VESA VGA frame buffer device
[ 0.661591] intel_idle: MWAIT substates: 0x1120
[ 0.661592] intel_idle: v0.4 model 0x25
[ 0.661593] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.661831] ACPI: AC Adapter [ADP1] (on-line)
[ 0.661913] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.661917] ACPI: Power Button [PWRB]
[ 0.661953] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.661967] ACPI: Lid Switch [LID]
[ 0.662002] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.662004] ACPI: Power Button [PWRF]
[ 0.662404] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.662406] ACPI: Thermal Zone [TZ01] (92 C)
[ 0.662431] GHES: HEST is not enabled!
[ 0.662533] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.662707] ACPI: Battery Slot [BAT1] (battery present)
[ 0.662732] isapnp: Scanning for PnP cards...
[ 0.683212] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.685094] Linux agpgart interface v0.103
[ 0.685439] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
[ 0.744868] tpm_tis 00:01: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us
[ 0.804858] tpm_tis 00:01: Adjusting TPM timeout parameters.
[ 0.973821] isapnp: No Plug & Play device found
[ 1.584921] tpm_tis 00:01: TPM is disabled/deactivated (0x7)
[ 1.587438] brd: module loaded
[ 1.588143] loop: module loaded
[ 1.588340] libphy: Fixed MDIO Bus: probed
[ 1.588342] tun: Universal TUN/TAP device driver, 1.6
[ 1.588343] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.588390] PPP generic driver version 2.4.2
[ 1.588463] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.588468] ehci-pci: EHCI PCI platform driver
[ 1.588622] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.588628] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.588643] ehci-pci 0000:00:1a.0: debug port 2
[ 1.592562] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.592577] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd7327c00
[ 1.600810] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.600847] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.600849] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.600851] usb usb1: Product: EHCI Host Controller
[ 1.600852] usb usb1: Manufacturer: Linux 3.19.0-15-generic ehci_hcd
[ 1.600853] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.600960] hub 1-0:1.0: USB hub found
[ 1.600967] hub 1-0:1.0: 3 ports detected
[ 1.601210] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.601215] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.601229] ehci-pci 0000:00:1d.0: debug port 2
[ 1.605141] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.605154] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd7327800
[ 1.616817] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.616844] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.616845] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.616847] usb usb2: Product: EHCI Host Controller
[ 1.616848] usb usb2: Manufacturer: Linux 3.19.0-15-generic ehci_hcd
[ 1.616850] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.617002] hub 2-0:1.0: USB hub found
[ 1.617006] hub 2-0:1.0: 3 ports detected
[ 1.617108] ehci-platform: EHCI generic platform driver
[ 1.617116] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.617125] ohci-pci: OHCI PCI platform driver
[ 1.617136] ohci-platform: OHCI generic platform driver
[ 1.617143] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.617191] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.618565] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.618569] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.618687] mousedev: PS/2 mouse device common for all mice
[ 1.618871] rtc_cmos 00:05: RTC can wake from S4
[ 1.619007] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.619038] rtc_cmos 00:05: alarms up to one year, 242 bytes nvram, hpet irqs
[ 1.619046] i2c /dev entries driver
[ 1.619080] device-mapper: uevent: version 1.0.3
[ 1.619142] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 1.619161] platform eisa.0: Probing EISA bus 0
[ 1.619163] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.619164] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.619166] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.619167] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.619169] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.619170] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.619171] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.619173] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.619174] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.619176] platform eisa.0: EISA: Detected 0 cards
[ 1.619190] cpufreq-nforce2: No nForce2 chipset.
[ 1.619197] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.619205] PCCT header not found.
[ 1.619206] ACPI PCC probe failed.
[ 1.619293] TCP: cubic registered
[ 1.619388] NET: Registered protocol family 10
[ 1.619593] NET: Registered protocol family 17
[ 1.619603] Key type dns_resolver registered
[ 1.619802] Using IPI No-Shortcut mode
[ 1.620038] Loading compiled-in X.509 certificates
[ 1.622605] Loaded X.509 cert 'Magrathea: Glacier signing key: 9b23c11a9a02c71e89328f2ab21d0a23af16d7ed'
[ 1.622617] registered taskstats version 1
[ 1.624771] Key type trusted registered
[ 1.628595] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.629391] Key type encrypted registered
[ 1.629402] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.652881] tsc: Refined TSC clocksource calibration: 2659.997 MHz
[ 1.676942] tpm_tis 00:01: A TPM error (7) occurred attempting to read a pcr value
[ 1.676947] ima: No TPM chip found, activating TPM-bypass!
[ 1.676992] evm: HMAC attrs: 0x1
[ 1.677742] Magic number: 8:117:793
[ 1.677906] rtc_cmos 00:05: setting system clock to 2016-03-16 16:45:33 UTC (1458146733)
[ 1.678047] ACPI: Invalid _PSD:coord_type
[ 1.678064] ACPI: Invalid _PSD:coord_type
[ 1.678082] ACPI: Invalid _PSD:coord_type
[ 1.678096] ACPI: Invalid _PSD:coord_type
[ 1.678828] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.678830] EDD information not available.
[ 1.678892] PM: Hibernation image not present or could not be loaded.
[ 1.679194] Freeing unused kernel memory: 888K (c1a93000 - c1b71000)
[ 1.679261] Write protecting the kernel text: 7112k
[ 1.679402] Write protecting the kernel read-only data: 3000k
[ 1.679403] NX-protecting the kernel data: 5176k
[ 1.689045] random: systemd-udevd urandom read with 0 bits of entropy available
[ 1.714312] pps_core: LinuxPPS API ver. 1 registered
[ 1.714316] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.716661] sdhci: Secure Digital Host Controller Interface driver
[ 1.716663] sdhci: Copyright(c) Pierre Ossman
[ 1.719609] PTP clock support registered
[ 1.719787] ahci 0000:00:1f.2: version 3.0
[ 1.720003] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.720038] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x22 impl SATA mode
[ 1.720041] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 1.722153] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 1.722327] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.722334] sdhci-pci 0000:02:00.0: No vmmc regulator found
[ 1.722337] sdhci-pci 0000:02:00.0: No vqmmc regulator found
[ 1.723533] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 1.727767] scsi host0: ahci
[ 1.729875] scsi host1: ahci
[ 1.730480] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.730482] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 1.731678] scsi host2: ahci
[ 1.731878] scsi host3: ahci
[ 1.732025] scsi host4: ahci
[ 1.732171] scsi host5: ahci
[ 1.732226] ata1: DUMMY
[ 1.732229] ata2: SATA max UDMA/133 abar m2048@0xd7327000 port 0xd7327180 irq 25
[ 1.732230] ata3: DUMMY
[ 1.732231] ata4: DUMMY
[ 1.732232] ata5: DUMMY
[ 1.732235] ata6: SATA max UDMA/133 abar m2048@0xd7327000 port 0xd7327380 irq 25
[ 1.732536] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.905652] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:23:18:ed:af:89
[ 1.905655] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.905707] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: FFFFFF-0FF
[ 1.912948] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.928956] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.045666] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.045673] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.046180] hub 1-1:1.0: USB hub found
[ 2.046401] hub 1-1:1.0: 6 ports detected
[ 2.048892] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.050736] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 2.050741] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT1._SDD] (Node f389cc30), AE_NOT_FOUND (20141107/psparse-536)
[ 2.050753] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 2.050756] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT1._GTF] (Node f389cc48), AE_NOT_FOUND (20141107/psparse-536)
[ 2.050762] ata2.00: ATAPI: MATSHITADVD-RAM UJ890AS, 1.00, max UDMA/100
[ 2.053430] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 2.053439] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT1._SDD] (Node f389cc30), AE_NOT_FOUND (20141107/psparse-536)
[ 2.053463] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 2.053472] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT1._GTF] (Node f389cc48), AE_NOT_FOUND (20141107/psparse-536)
[ 2.053478] ata2.00: configured for UDMA/100
[ 2.060800] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890AS 1.00 PQ: 0 ANSI: 5
[ 2.061511] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.061517] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.061843] hub 2-1:1.0: USB hub found
[ 2.061938] hub 2-1:1.0: 8 ports detected
[ 2.079766] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.079771] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.080045] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.080126] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 2.317192] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[ 2.333256] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[ 2.396945] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.411682] usb 1-1.2: New USB device found, idVendor=08ff, idProduct=168b
[ 2.411689] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.411693] usb 1-1.2: Product: Fingerprint Sensor
[ 2.425932] usb 2-1.5: New USB device found, idVendor=0b97, idProduct=7761
[ 2.425938] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.426376] hub 2-1.5:1.0: USB hub found
[ 2.426482] hub 2-1.5:1.0: 4 ports detected
[ 2.481214] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 2.575089] usb 1-1.3: New USB device found, idVendor=18a5, idProduct=0302
[ 2.575096] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.575100] usb 1-1.3: Product: STORE N GO
[ 2.575104] usb 1-1.3: Manufacturer: Verbatim
[ 2.575107] usb 1-1.3: SerialNumber: 018000000002E975
[ 2.580981] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 2.581096] scsi host6: usb-storage 1-1.3:1.0
[ 2.581165] usbcore: registered new interface driver usb-storage
[ 2.584400] usbcore: registered new interface driver uas
[ 2.645217] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[ 2.653194] Switched to clocksource tsc
[ 2.697200] usb 2-1.5.2: new full-speed USB device number 4 using ehci-pci
[ 2.743449] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b130
[ 2.743456] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.743460] usb 1-1.4: Product: USB2.0 UVC WebCam
[ 2.743464] usb 1-1.4: Manufacturer: Chicony
[ 2.743467] usb 1-1.4: SerialNumber: CNA8155-000001
[ 2.790605] usb 2-1.5.2: New USB device found, idVendor=0b97, idProduct=7772
[ 2.790611] usb 2-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.790616] usb 2-1.5.2: Product: O2Micro CCID SC Reader
[ 2.790619] usb 2-1.5.2: Manufacturer: O2
[ 2.817266] usb 1-1.5: new high-speed USB device number 6 using ehci-pci
[ 2.913125] usb 1-1.5: New USB device found, idVendor=0930, idProduct=1311
[ 2.913132] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.913136] usb 1-1.5: Product: F3607gw
[ 2.913139] usb 1-1.5: Manufacturer: 0 F3607gw
[ 2.913143] usb 1-1.5: SerialNumber: 3564000300825090
[ 2.988000] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[ 3.003465] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
[ 3.582374] scsi 6:0:0:0: Direct-Access Verbatim STORE N GO 1.00 PQ: 0 ANSI: 2
[ 3.582889] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 3.583852] sd 6:0:0:0: [sda] 31299584 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 3.584797] sd 6:0:0:0: [sda] Write Protect is off
[ 3.584804] sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 3.585952] sd 6:0:0:0: [sda] No Caching mode page found
[ 3.585958] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 3.593389] sda: sda1 sda2 < sda5 >
[ 3.598125] sd 6:0:0:0: [sda] Attached SCSI removable disk
[ 4.080150] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.600666] systemd[1]: Inserted module 'autofs4'
[ 4.659264] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 4.659391] systemd[1]: Detected architecture x86.
[ 4.668245] systemd[1]: Set hostname to <rastaman-weed>.
[ 5.052612] systemd[1]: Reached target Encrypted Volumes.
[ 5.052623] systemd[1]: Starting Encrypted Volumes.
[ 5.052658] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.052665] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.052812] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.052822] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.052833] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.052839] systemd[1]: Starting Remote File Systems (Pre).
[ 5.052863] systemd[1]: Created slice Root Slice.
[ 5.052869] systemd[1]: Starting Root Slice.
[ 5.052896] systemd[1]: Listening on Journal Audit Socket.
[ 5.052902] systemd[1]: Starting Journal Audit Socket.
[ 5.052921] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.052927] systemd[1]: Starting fsck to fsckd communication Socket.
[ 5.052994] systemd[1]: Created slice User and Session Slice.
[ 5.053002] systemd[1]: Starting User and Session Slice.
[ 5.053024] systemd[1]: Listening on udev Control Socket.
[ 5.053030] systemd[1]: Starting udev Control Socket.
[ 5.053047] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.053053] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.053077] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.053083] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.053119] systemd[1]: Listening on Journal Socket.
[ 5.053141] systemd[1]: Starting Journal Socket.
[ 5.074190] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.074203] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.074230] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.074238] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.074260] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.074267] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.074340] systemd[1]: Created slice System Slice.
[ 5.074353] systemd[1]: Starting System Slice.
[ 5.074851] systemd[1]: Starting Nameserver information manager...
[ 5.075330] systemd[1]: Started Read required files in advance.
[ 5.075480] systemd[1]: Starting Read required files in advance...
[ 5.076034] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.076482] systemd[1]: Mounting Huge Pages File System...
[ 5.117421] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.117578] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.117588] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.117963] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.118416] systemd[1]: Starting Setup Virtual Console...
[ 5.119110] systemd[1]: Mounting Debug File System...
[ 5.119577] systemd[1]: Starting Uncomplicated firewall...
[ 5.119641] systemd[1]: Listening on udev Kernel Socket.
[ 5.119656] systemd[1]: Starting udev Kernel Socket.
[ 5.120221] systemd[1]: Starting udev Coldplug all Devices...
[ 5.120253] systemd[1]: Reached target Slices.
[ 5.120265] systemd[1]: Starting Slices.
[ 5.120895] systemd[1]: Started Braille Device Support.
[ 5.120954] systemd[1]: Starting Braille Device Support...
[ 5.121411] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 5.121509] systemd[1]: Created slice system-getty.slice.
[ 5.121519] systemd[1]: Starting system-getty.slice.
[ 5.121971] systemd[1]: Starting Increase datagram queue length...
[ 5.210825] systemd[1]: Starting Load Kernel Modules...
[ 5.211622] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.211828] systemd[1]: Started Setup Virtual Console.
[ 5.212307] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.266831] systemd[1]: Started Uncomplicated firewall.
[ 5.314350] systemd[1]: Mounted Huge Pages File System.
[ 5.314998] systemd[1]: Mounted Debug File System.
[ 5.315028] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.316587] systemd[1]: Started Increase datagram queue length.
[ 5.318404] systemd[1]: Started udev Coldplug all Devices.
[ 5.333143] systemd[1]: Starting udev Wait for Complete Device Initialization...
[ 5.333202] systemd[1]: Listening on Syslog Socket.
[ 5.333215] systemd[1]: Starting Syslog Socket.
[ 5.333678] systemd[1]: Starting Journal Service...
[ 5.338028] systemd[1]: Started Nameserver information manager.
[ 5.641785] lp: driver loaded but no devices found
[ 5.672639] ppdev: user-space parallel port driver
[ 5.710641] systemd[1]: Started Journal Service.
[ 5.949334] random: nonblocking pool is initialized
[ 8.246989] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[ 8.250561] acpi device:02: registered as cooling_device4
[ 8.250663] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[ 8.254873] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20141107/utaddress-258)
[ 8.254880] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.254884] ACPI Warning: SystemIO range 0x00000540-0x0000054f conflicts with OpRegion 0x00000500-0x0000057b (\GPIO) (20141107/utaddress-258)
[ 8.254888] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.254890] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x0000057b (\GPIO) (20141107/utaddress-258)
[ 8.254893] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.254895] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x0000057b (\GPIO) (20141107/utaddress-258)
[ 8.254899] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.254900] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.288351] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[ 8.288410] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 8.293594] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[ 8.293910] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 8.294316] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 8.307129] toshiba_haps: Toshiba HDD Active Protection Sensor device
[ 8.418148] toshiba_haps: HDD protection level set to: 2
[ 8.460029] wmi: Mapper loaded
[ 8.492771] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.526126] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.20
[ 8.526657] input: Toshiba input device as /devices/virtual/input/input9
[ 8.679504] cfg80211: Calling CRDA to update world regulatory domain
[ 8.698392] toshiba_acpi: Illumination device not available
[ 8.700875] toshiba_acpi: Keyboard illumination not available
[ 8.779348] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 8.779351] Copyright(c) 2003- 2014 Intel Corporation
[ 8.779490] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.871927] media: Linux media interface: v0.10
[ 8.879125] cdc_wdm 1-1.5:1.5: cdc-wdm0: USB WDM device
[ 8.879186] cdc_wdm 1-1.5:1.8: cdc-wdm1: USB WDM device
[ 8.879204] usbcore: registered new interface driver cdc_wdm
[ 8.879564] cdc_acm 1-1.5:1.1: ttyACM0: USB ACM device
[ 8.880923] cdc_acm 1-1.5:1.3: ttyACM1: USB ACM device
[ 8.883536] [drm] Initialized drm 1.1.0 20060810
[ 8.885408] cdc_acm 1-1.5:1.9: ttyACM2: USB ACM device
[ 8.889392] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[ 8.895197] usbcore: registered new interface driver cdc_acm
[ 8.895200] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8.917423] Linux video capture interface: v2.00
[ 8.933255] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[ 8.961625] usb 1-1.6: new full-speed USB device number 7 using ehci-pci
[ 9.009929] cdc_ether 1-1.5:1.6 wwan0: register 'cdc_ether' at usb-0000:00:1a.0-1.5, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 9.009952] usbcore: registered new interface driver cdc_ether
[ 9.046851] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 9.228911] uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b130)
[ 9.249975] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 9.250021] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 9.251037] input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10
[ 9.251104] usbcore: registered new interface driver uvcvideo
[ 9.251105] USB Video Class driver (1.1.1)
[ 9.344628] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.344632] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.344634] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 9.344635] sound hdaudioC0D0: mono: mono_out=0x0
[ 9.344636] sound hdaudioC0D0: inputs:
[ 9.344638] sound hdaudioC0D0: Internal Mic=0x19
[ 9.344640] sound hdaudioC0D0: Mic=0x18
[ 9.368198] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 9.374987] checking generic (d1000000 130000) vs hw (c0000000 10000000)
[ 9.374991] checking generic (d1000000 130000) vs hw (d0000000 2000000)
[ 9.374992] fb: switching to nouveaufb from VESA VGA
[ 9.375026] Console: switching to colour dummy device 80x25
[ 9.375379] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8500a2
[ 9.375382] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 9.375383] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 9.407835] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 9.407923] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 9.407926] nouveau [ VBIOS][0000:01:00.0] version 70.18.47.00.07
[ 9.408709] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 9.408747] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 9.408749] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 9.408750] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 9.411562] nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
[ 9.421181] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 9.421185] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 9.421187] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 9.421190] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 9.421253] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 9.455648] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 9.487970] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.488179] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.701657] cfg80211: World regulatory domain updated:
[ 9.701661] cfg80211: DFS Master region: unset
[ 9.701662] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.701664] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9.701666] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9.701667] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9.701669] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9.701670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9.996504] usb 1-1.6: New USB device found, idVendor=0930, idProduct=0508
[ 9.996508] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.996510] usb 1-1.6: Product: EYSNJCSAX-A
[ 9.996511] usb 1-1.6: Manufacturer: TAIYO YUDEN
[ 10.033697] Adding 4050940k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:4050940k FS
[ 10.081431] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 10.081449] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 10.081455] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 10.083838] Bluetooth: Core ver 2.20
[ 10.083851] NET: Registered protocol family 31
[ 10.083852] Bluetooth: HCI device and connection manager initialized
[ 10.083855] Bluetooth: HCI socket layer initialized
[ 10.083857] Bluetooth: L2CAP socket layer initialized
[ 10.083862] Bluetooth: SCO socket layer initialized
[ 10.084322] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 10.084419] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 10.084517] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 10.084600] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 10.097417] usbcore: registered new interface driver btusb
[ 10.101368] nouveau [ CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[ 10.101373] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 405 MHz
[ 10.101376] nouveau [ CLK][0000:01:00.0] 0f: core 535 MHz shader 1230 MHz memory 790 MHz
[ 10.101420] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 10.101683] [TTM] Zone kernel: Available graphics memory: 429384 kiB
[ 10.101684] [TTM] Zone highmem: Available graphics memory: 1996524 kiB
[ 10.101686] [TTM] Initializing pool allocator
[ 10.101691] [TTM] Initializing DMA pool allocator
[ 10.101701] nouveau [ DRM] VRAM: 512 MiB
[ 10.101702] nouveau [ DRM] GART: 1048576 MiB
[ 10.101706] nouveau [ DRM] TMDS table version 2.0
[ 10.101709] nouveau [ DRM] DCB version 4.0
[ 10.101711] nouveau [ DRM] DCB outp 00: 010003f3 00010035
[ 10.101712] nouveau [ DRM] DCB outp 01: 02811300 00000000
[ 10.101714] nouveau [ DRM] DCB outp 02: 02822362 00020010
[ 10.101715] nouveau [ DRM] DCB outp 03: 01833310 00000000
[ 10.101716] nouveau [ DRM] DCB outp 04: 088443c6 0f220010
[ 10.101718] nouveau [ DRM] DCB outp 05: 08844382 00020010
[ 10.101719] nouveau [ DRM] DCB conn 00: 00000040
[ 10.101721] nouveau [ DRM] DCB conn 01: 00000100
[ 10.101722] nouveau [ DRM] DCB conn 02: 00001231
[ 10.101723] nouveau [ DRM] DCB conn 03: 00000351
[ 10.101724] nouveau [ DRM] DCB conn 04: 00202446
[ 10.101733] nouveau [ DRM] BIOS FP mode: 1600x900 (97790kHz pixel clock)
[ 10.132895] nouveau W[ DRM] unknown connector type 51
[ 10.133099] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.133101] [drm] Driver supports precise vblank timestamp query.
[ 10.167236] nouveau [ DRM] MM: using COPY for buffer copies
[ 11.132789] nouveau [ DRM] allocated 1600x900 fb: 0x70000, bo f1080400
[ 11.132889] fbcon: nouveaufb (fb0) is primary device
[ 11.132961] Console: switching to colour frame buffer device 200x56
[ 11.132996] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 11.132997] nouveau 0000:01:00.0: registered panic notifier
[ 11.139781] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0
[ 17.403855] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 17.437663] systemd-journald[255]: Received request to flush runtime journal from PID 1
[ 17.508580] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 17.524431] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 17.623992] audit: type=1400 audit(1458146749.439:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=550 comm="apparmor_parser"
[ 17.624002] audit: type=1400 audit(1458146749.439:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=550 comm="apparmor_parser"
[ 17.626060] audit: type=1400 audit(1458146749.439:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=550 comm="apparmor_parser"
[ 17.626067] audit: type=1400 audit(1458146749.439:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=550 comm="apparmor_parser"
[ 17.626072] audit: type=1400 audit(1458146749.439:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=550 comm="apparmor_parser"
[ 17.626078] audit: type=1400 audit(1458146749.439:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=550 comm="apparmor_parser"
[ 17.637269] audit: type=1400 audit(1458146749.451:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=550 comm="apparmor_parser"
[ 17.637279] audit: type=1400 audit(1458146749.451:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=550 comm="apparmor_parser"
[ 17.637284] audit: type=1400 audit(1458146749.451:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=550 comm="apparmor_parser"
[ 17.637289] audit: type=1400 audit(1458146749.451:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=550 comm="apparmor_parser"
[ 17.751762] cgroup: new mount options do not match the existing superblock, will be ignored
[ 18.041605] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.041608] Bluetooth: BNEP filters: protocol multicast
[ 18.041612] Bluetooth: BNEP socket layer initialized
[ 18.047554] Bluetooth: RFCOMM TTY layer initialized
[ 18.047560] Bluetooth: RFCOMM socket layer initialized
[ 18.047565] Bluetooth: RFCOMM ver 1.11
[ 18.897377] cdc_wdm 1-1.5:1.5: wdm_int_callback - 0 bytes
[ 18.898380] cdc_wdm 1-1.5:1.8: wdm_int_callback - 0 bytes
[ 19.349636] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 19.356411] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 19.569914] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 19.576755] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 22.804615] wlan0: authenticate with c8:cb:b8:a1:55:50
[ 22.837604] wlan0: send auth to c8:cb:b8:a1:55:50 (try 1/3)
[ 22.840315] wlan0: authenticated
[ 22.840625] wlan0: waiting for beacon from c8:cb:b8:a1:55:50
[ 22.874899] wlan0: associate with c8:cb:b8:a1:55:50 (try 1/3)
[ 22.878657] wlan0: RX AssocResp from c8:cb:b8:a1:55:50 (capab=0x431 status=0 aid=1)
[ 22.887537] wlan0: associated
[ 39.114698] show_signal_msg: 36 callbacks suppressed
[ 39.114703] nm-applet[1210]: segfault at c ip 08075359 sp bfc710a4 error 4 in nm-applet[8048000+5d000]
rastaman@rastaman-weed:~$ sudo lshw
[sudo] password for rastaman:
rastaman-weed
description: Computer
bits: 32 bits
fonctionnalités: smbios-2.4
*-core
description: Motherboard
identifiant matériel: 0
*-memory
description: Mémoire système
identifiant matériel: 0
taille: 3899MiB
*-cpu
produit: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz
fabriquant: Intel Corp.
identifiant matériel: 1
information bus: cpu@0
version: 6.5.5
numéro de série: 0002-0655-0000-0000-0000-0000
taille: 2533MHz
capacité: 2667MHz
bits: 64 bits
fonctionnalités: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt aes lahf_lm ida arat dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq
configuration: id=0
*-logicalcpu:0
description: CPU Logique
identifiant matériel: 0.1
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:1
description: CPU Logique
identifiant matériel: 0.2
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:2
description: CPU Logique
identifiant matériel: 0.3
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:3
description: CPU Logique
identifiant matériel: 0.4
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:4
description: CPU Logique
identifiant matériel: 0.5
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:5
description: CPU Logique
identifiant matériel: 0.6
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:6
description: CPU Logique
identifiant matériel: 0.7
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:7
description: CPU Logique
identifiant matériel: 0.8
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:8
description: CPU Logique
identifiant matériel: 0.9
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:9
description: CPU Logique
identifiant matériel: 0.a
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:10
description: CPU Logique
identifiant matériel: 0.b
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:11
description: CPU Logique
identifiant matériel: 0.c
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:12
description: CPU Logique
identifiant matériel: 0.d
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:13
description: CPU Logique
identifiant matériel: 0.e
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:14
description: CPU Logique
identifiant matériel: 0.f
bits: 64 bits
fonctionnalités: logical
*-logicalcpu:15
description: CPU Logique
identifiant matériel: 0.10
bits: 64 bits
fonctionnalités: logical
*-pci:0
description: Host bridge
produit: Core Processor DRAM Controller
fabriquant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 02
bits: 32 bits
horloge: 33MHz
*-pci:0
description: PCI bridge
produit: Core Processor PCI Express x16 Root Port
fabriquant: Intel Corporation
identifiant matériel: 1
information bus: pci@0000:00:01.0
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:24 portE/S:3000(taille=4096) mémoire:d2000000-d30fffff portE/S:c0000000(taille=301989888)
*-display
description: VGA compatible controller
produit: GT218M [NVS 2100M]
fabriquant: NVIDIA Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: a2
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=0
ressources: irq:30 mémoire:d2000000-d2ffffff mémoire:c0000000-cfffffff mémoire:d0000000-d1ffffff portE/S:3000(taille=128) mémoire:d3080000-d30fffff
*-multimedia
description: Audio device
produit: High Definition Audio Controller
fabriquant: NVIDIA Corporation
identifiant matériel: 0.1
information bus: pci@0000:01:00.1
version: a1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:16 mémoire:d3000000-d3003fff
*-communication
description: Communication controller
produit: 5 Series/3400 Series Chipset HECI Controller
fabriquant: Intel Corporation
identifiant matériel: 16
information bus: pci@0000:00:16.0
version: 06
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=mei_me latency=0
ressources: irq:27 mémoire:d7328000-d732800f
*-network
description: Ethernet interface
produit: 82577LM Gigabit Network Connection
fabriquant: Intel Corporation
identifiant matériel: 19
information bus: pci@0000:00:19.0
nom logique: eth0
version: 06
numéro de série: 00:23:18:ed:af:89
capacité: 1Gbit/s
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=0.12-3 latency=0 link=no multicast=yes port=twisted pair
ressources: irq:26 mémoire:d7300000-d731ffff mémoire:d7325000-d7325fff portE/S:4020(taille=32)
*-usb:0
description: USB controller
produit: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
fabriquant: Intel Corporation
identifiant matériel: 1a
information bus: pci@0000:00:1a.0
version: 06
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:16 mémoire:d7327c00-d7327fff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 3.19.0-15-generic ehci_hcd
identifiant matériel: 1
information bus: usb@1
nom logique: usb1
version: 3.19
fonctionnalités: usb-2.00
configuration: driver=hub slots=3 speed=480Mbit/s
*-usb
description: Concentrateur USB
produit: Integrated Rate Matching Hub
fabriquant: Intel Corp.
identifiant matériel: 1
information bus: usb@1:1
version: 0.00
fonctionnalités: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-usb:0 NON-RÉCLAMÉ
description: Périphérique USB générique
produit: Fingerprint Sensor
fabriquant: AuthenTec, Inc.
identifiant matériel: 2
information bus: usb@1:1.2
version: 25.01
fonctionnalités: usb-2.00
configuration: maxpower=100mA speed=12Mbit/s
*-usb:1
description: Périphérique de stockage de masse
produit: STORE N GO
fabriquant: Verbatim
identifiant matériel: 3
information bus: usb@1:1.3
nom logique: scsi6
version: 1.00
numéro de série: 018000000002E975
fonctionnalités: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=100mA speed=480Mbit/s
*-disk
description: SCSI Disk
identifiant matériel: 0.0.0
information bus: scsi@6:0.0.0
nom logique: /dev/sda
taille: 14GiB (16GB)
fonctionnalités: partitioned partitioned:dos
configuration: logicalsectorsize=512 sectorsize=512 signature=4b3ba8a4
*-volume:0
description: Linux filesystem partition
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@6:0.0.0,1
nom logique: /dev/sda1
nom logique: /boot
version: 1.0
numéro de série: 9c06cb7a-c0b4-4b56-aeaf-2850862284ac
taille: 243MiB
capacité: 243MiB
fonctionnalités: primary bootable extended_attributes ext2 initialized
configuration: filesystem=ext2 lastmountpoint=/boot modified=2016-03-16 16:22:21 mount.fstype=ext2 mount.options=rw,relatime mounted=2016-03-16 15:51:40 state=mounted
*-volume:1
description: Extended partition
identifiant matériel: 2
information bus: scsi@6:0.0.0,2
nom logique: /dev/sda2
taille: 14GiB
capacité: 14GiB
fonctionnalités: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux LVM Physical Volume partition
identifiant matériel: 5
nom logique: /dev/sda5
numéro de série: p2AJK3-0owk-tBmu-mGNu-RGwI-jadb-sHneLZ
taille: 14GiB
capacité: 14GiB
fonctionnalités: multi lvm2
*-usb:2
description: Vidéo
produit: USB2.0 UVC WebCam
fabriquant: Chicony
identifiant matériel: 4
information bus: usb@1:1.4
version: 77.30
numéro de série: CNA8155-000001
fonctionnalités: usb-2.00
configuration: driver=uvcvideo maxpower=500mA speed=480Mbit/s
*-usb:3
description: Périphérique de communication
produit: F3607gw
fabriquant: 0F3607gw
identifiant matériel: 5
information bus: usb@1:1.5
version: 0.00
numéro de série: 3564000300825090
fonctionnalités: usb-2.00
configuration: driver=cdc_acm maxpower=20mA speed=480Mbit/s
*-usb:4
description: Interface sans fil Bluetooth
produit: EYSNJCSAX-A
fabriquant: TAIYO YUDEN
identifiant matériel: 6
information bus: usb@1:1.6
version: 52.76
fonctionnalités: bluetooth usb-2.00
configuration: driver=btusb speed=12Mbit/s
*-multimedia
description: Audio device
produit: 5 Series/3400 Series Chipset High Definition Audio
fabriquant: Intel Corporation
identifiant matériel: 1b
information bus: pci@0000:00:1b.0
version: 06
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:29 mémoire:d7320000-d7323fff
*-pci:1
description: PCI bridge
produit: 5 Series/3400 Series Chipset PCI Express Root Port 1
fabriquant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: 06
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:16 portE/S:5000(taille=4096) mémoire:d7200000-d72fffff portE/S:d7500000(taille=2097152)
*-generic:0
description: SD Host controller
produit: MMC/SD Host Controller
fabriquant: Ricoh Co Ltd
identifiant matériel: 0
information bus: pci@0000:02:00.0
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: msi pm pciexpress bus_master cap_list
configuration: driver=sdhci-pci latency=0
ressources: irq:16 mémoire:d7200200-d72002ff
*-generic:1 NON-RÉCLAMÉ
description: System peripheral
produit: R5U2xx (R5U230 / R5U231 / R5U241) [Memory Stick Host Controller]
fabriquant: Ricoh Co Ltd
identifiant matériel: 0.1
information bus: pci@0000:02:00.1
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: msi pm pciexpress bus_master cap_list
configuration: latency=0
ressources: mémoire:d7200100-d72001ff
*-pci:2
description: PCI bridge
produit: 5 Series/3400 Series Chipset PCI Express Root Port 2
fabriquant: Intel Corporation
identifiant matériel: 1c.1
information bus: pci@0000:00:1c.1
version: 06
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:17 portE/S:6000(taille=4096) mémoire:d7100000-d71fffff portE/S:d7700000(taille=2097152)
*-network
description: Interface réseau sans fil
produit: Centrino Advanced-N 6200
fabriquant: Intel Corporation
identifiant matériel: 0
information bus: pci@0000:03:00.0
nom logique: wlan0
version: 35
numéro de série: 00:27:10:59:33:34
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=3.19.0-15-generic firmware=9.221.4.1 build 25532 ip=192.168.0.81 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
ressources: irq:28 mémoire:d7100000-d7101fff
*-pci:3
description: PCI bridge
produit: 5 Series/3400 Series Chipset PCI Express Root Port 3
fabriquant: Intel Corporation
identifiant matériel: 1c.2
information bus: pci@0000:00:1c.2
version: 06
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:18 portE/S:2000(taille=4096) mémoire:d5100000-d70fffff portE/S:d3100000(taille=33554432)
*-usb:1
description: USB controller
produit: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
fabriquant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: 06
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:23 mémoire:d7327800-d7327bff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 3.19.0-15-generic ehci_hcd
identifiant matériel: 1
information bus: usb@2
nom logique: usb2
version: 3.19
fonctionnalités: usb-2.00
configuration: driver=hub slots=3 speed=480Mbit/s
*-usb
description: Concentrateur USB
produit: Integrated Rate Matching Hub
fabriquant: Intel Corp.
identifiant matériel: 1
information bus: usb@2:1
version: 0.00
fonctionnalités: usb-2.00
configuration: driver=hub slots=8 speed=480Mbit/s
*-usb
description: Concentrateur USB
produit: Oz776 1.1 Hub
fabriquant: O2 Micro, Inc.
identifiant matériel: 5
information bus: usb@2:1.5
version: 1.10
fonctionnalités: usb-1.10
configuration: driver=hub maxpower=2mA slots=4 speed=12Mbit/s
*-usb NON-RÉCLAMÉ
description: Lecteur de carte à puce
produit: O2Micro CCID SC Reader
fabriquant: O2
identifiant matériel: 2
information bus: usb@2:1.5.2
version: 1.10
fonctionnalités: usb-1.10
configuration: speed=12Mbit/s
*-pci:4
description: PCI bridge
produit: 82801 Mobile PCI Bridge
fabriquant: Intel Corporation
identifiant matériel: 1e
information bus: pci@0000:00:1e.0
version: a6
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci subtractive_decode bus_master cap_list
*-isa
description: ISA bridge
produit: Mobile 5 Series Chipset LPC Interface Controller
fabriquant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 06
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
ressources: irq:0
*-storage
description: SATA controller
produit: 5 Series/3400 Series Chipset 6 port SATA AHCI Controller
fabriquant: Intel Corporation
identifiant matériel: 1f.2
information bus: pci@0000:00:1f.2
version: 06
bits: 32 bits
horloge: 66MHz
fonctionnalités: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
ressources: irq:25 portE/S:4048(taille=8) portE/S:405c(taille=4) portE/S:4040(taille=8) portE/S:4058(taille=4) portE/S:4000(taille=32) mémoire:d7327000-d73277ff
*-generic
description: Signal processing controller
produit: 5 Series/3400 Series Chipset Thermal Subsystem
fabriquant: Intel Corporation
identifiant matériel: 1f.6
information bus: pci@0000:00:1f.6
version: 06
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=intel ips latency=0
ressources: irq:18 mémoire:d7324000-d7324fff
*-pci:1
description: Host bridge
produit: Core Processor QuickPath Architecture Generic Non-core Registers
fabriquant: Intel Corporation
identifiant matériel: 101
information bus: pci@0000:ff:00.0
version: 02
bits: 32 bits
horloge: 33MHz
*-pci:2
description: Host bridge
produit: Core Processor QuickPath Architecture System Address Decoder
fabriquant: Intel Corporation
identifiant matériel: 102
information bus: pci@0000:ff:00.1
version: 02
bits: 32 bits
horloge: 33MHz
*-pci:3
description: Host bridge
produit: Core Processor QPI Link 0
fabriquant: Intel Corporation
identifiant matériel: 103
information bus: pci@0000:ff:02.0
version: 02
bits: 32 bits
horloge: 33MHz
*-pci:4
description: Host bridge
produit: 1st Generation Core Processor QPI Physical 0
fabriquant: Intel Corporation
identifiant matériel: 104
information bus: pci@0000:ff:02.1
version: 02
bits: 32 bits
horloge: 33MHz
*-pci:5
description: Host bridge
produit: 1st Generation Core Processor Reserved
fabriquant: Intel Corporation
identifiant matériel: 105
information bus: pci@0000:ff:02.2
version: 02
bits: 32 bits
horloge: 33MHz
*-pci:6
description: Host bridge
produit: 1st Generation Core Processor Reserved
fabriquant: Intel Corporation
identifiant matériel: 106
information bus: pci@0000:ff:02.3
version: 02
bits: 32 bits
horloge: 33MHz
*-scsi
identifiant matériel: 2
nom logique: scsi1
fonctionnalités: emulated
*-cdrom
description: DVD-RAM writer
produit: DVD-RAM UJ890AS
fabriquant: MATSHITA
identifiant matériel: 0.0.0
information bus: scsi@1:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/cdrw
nom logique: /dev/dvd
nom logique: /dev/dvdrw
nom logique: /dev/sr0
version: 1.00
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=ready
*-medium
identifiant matériel: 0
nom logique: /dev/cdrom
*-network DÉSACTIVÉ
description: Ethernet interface
identifiant matériel: 1
nom logique: wwan0
numéro de série: 02:80:37:ec:02:00
fonctionnalités: ethernet physical
configuration: broadcast=yes driver=cdc_ether driverversion=22-Aug-2005 firmware=Mobile Broadband Network Device link=no multicast=yes
rastaman@rastaman-weed:~$ Hors ligne
#8 Le 16/03/2016, à 19:27
- moko138
Re : installation sur usb3.0 lent tres lent
lshw a écrit :
*-usb:0
description: USB controller
produit: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
Apparemment ta carte mère n'est pas équipée d'usb3
-------------
Par ailleurs, sur ta SanDisk (et non scandisk, qui est une commande de windows), tu as fait une installation en LVM
*-disk
description: SCSI Disk
produit: Cruzer Blade
fabriquant: SanDisk
nom logique: /dev/sda
taille: 29GiB (32GB)
fonctionnalités: removable
*-medium
nom logique: /dev/sda
taille: 29GiB (32GB)
*-volume:0
nom logique: /dev/sda1
nom logique: /boot
taille: 243MiB
*-volume:1
description: Extended partition
nom logique: /dev/sda2
*-logicalvolume
description: Linux LVM Physical Volume partition
nom logique: /dev/sda5
capacité: 29GiB
fonctionnalités: multi lvm2LVM, donc chiffrée. Le savais-tu ?
Correction : on peut obtenir un LVM non chiffré. Cf. ./viewtopic.php?pid=13599911#p13599911
Dernière modification par moko138 (Le 16/03/2016, à 20:20)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#9 Le 16/03/2016, à 19:46
- windaube21
Re : installation sur usb3.0 lent tres lent
oui ma carte mere n'est pas equiper en USB3.0 mais ce n'est pas une surprisse ...sur la boite c’était marquer compatible usb 2.0 je me suis dit "cool si elle peut aller vite en 3.0 en 2.0 elle doit aller pas trop mal "
pour la sandisk l’installation n'est pas chiffrer j'ai décocher cette option a l'install mais jai fait "installer avec LVM" car en plus petit en bas il avait quelle que chose qui disait que LVM s'occupait de faire les partitions et tout le tralalal a la bonne taille et heureusement car entre la partition d’amorçage le swap et je ne sait plus quoi cette outils est bien pratique
chiffrée ou non la sandisk fonctionne a merveille 
bref mon problème vient vraiment du faite que les clé "malade" sont compatible usb 3 ? car en vitesse de lecture sa semble tenir la route tout de meme
Hors ligne
#10 Le 16/03/2016, à 20:16
- moko138
Re : installation sur usb3.0 lent tres lent
NB : LVM n'implique pas chiffrement (je corrige plus haut).
- -
Comme ta carte n'est pas matériellement équipée usb3, elle fonctionne en usb2, donc les débits voisins de 20 Mo/s que tu obtiens sont normaux (c'est ce que j'ai chez moi).
- -
Sur la carte que tu dis malade :
[ 5.052612] systemd[1]: Reached target Encrypted Volumes.
[ 5.052623] systemd[1]: Starting Encrypted Volumes.
Il y a chiffrement.
- -
Sur la carte que tu dis valide :
Je ne vois pas trace de chiffrement. Mais :
[ 311.709346] sr 1:0:0:0: [sr0] Sense Key : Hardware Error [current]
[ 311.709354] sr 1:0:0:0: [sr0] ASC=0x9 <<vendor>> ASCQ=0x90
[ 311.709357] sr 1:0:0:0: [sr0] CDB:
[ 311.709360] Read(10): 28 00 00 00 00 00 00 00 08 00
[ 311.709374] blk_update_request: I/O error, dev sr0, sector 0
Avec une erreur sur le secteur 0, c'est étonnant qu'elle fonctionne.
Si elle est sous garantie...
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#11 Le 16/03/2016, à 20:40
- windaube21
Re : installation sur usb3.0 lent tres lent
je vais de nouveau installer ubuntu en etant sur que le chifrement soit desactivé cette fois
et pour la valide la clé est neuve et je me vois mal aller a boulanger dire " bon alor cette clé vous la mettez sur un pc elle fonctionne mais le secteur 0 est mort il m'en faudrai une autre svp ":lol:
sur une clé malade je vient de tester un copie d'un fichier volumineux depuis mon NAS ( le tout en gigabit pas de souci ) ben j’obtiens une copie a 4mo/s ... bon cest pas super super mais bon cela n'explique pas pourquoi le systeme rame a ce point alor qu'il arrive tres bien a lire et ecrire sur sont stockage
meme a l'arret de la machine sur une clé valide en 10seconde le pc est éteint ... la quant je fait etiendre il me met un ecran noir pendant une minutes avant de s’arrêter
Hors ligne
#12 Le 16/03/2016, à 20:53
- moko138
Re : installation sur usb3.0 lent tres lent
Il faut être précis :
j'ai cru comprendre que tu avais au moins 4 clefs/cartes-mémoire (les unes live, d'autres avec vraie installation, les autres de stockage), un DDE, un NAS...
Je ne sais jamais de quoi tu parles.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#13 Le 16/03/2016, à 21:04
- windaube21
Re : installation sur usb3.0 lent tres lent
désoler alor je vais tout résumer
j'ai une clé 8go lambda que je prepare sous windows avec lili usb pour accueil un live ubuntu en 14.04 ou 15.04
je boot sur le live et apres je suis les etapes d'install
jai installer ubuntu 14.04 avec cette methode sur plusieur clé ou disque dur externe
1- sandisk 16go 2.0 > ras un peut la clé lente mais sans plus
2- un DD 3.5 alimenter usb 2.0 > super sa tourne niquelle
3- sandisk 32go 2.0 > ras super
4- ryval 16go 3.0 et 2.0 > systeme super lent
5- verbatim 16ho 3.0 et 2.0 > systeme super lent
pour éviter tout confusion les test ont eter fait avec la sandisk 32go qui va bien et la verbatim 16go
j'ai des probleme sur la ryval et la verbatim qui sont compatible 3.0 et retroconpatible avec de l'usb 2.0
et pour le nas cetait un test de copie d'un fichier volumineux du nas vers ubuntu pour voir comment le systeme se comportait avec quelle que chose qui allai le saturer en ecriture sur la clé
autre chose intéresante ( ou pas ) quant ont lance le live ont arrive sur un menu qui propose soit tester ubuntu soit installer ubuntu
alor avec une clé connu pour aller bien > je fait installe et tout va bien
avec une clé qui va mal quant je fait installe sa mouline et sa resque bloquer, je suis obliger de fair quitter; aller sur le bureau et lancer l'installation depuis l'utilitaire quil y a sur le bureau
les clé en usb3.0 semble posser probleme a l'installation directement
Hors ligne
Pages : 1