#1 Le 20/03/2016, à 05:37
- MonPersoPrefereEstMortEnc
[Résolu]L'écran devient illisible tout plein de rayures Xfce
Bonjour,
Hier j'avais installé Ubuntu 15. Mais un léger ralentissement, un écran qui devient illisible avec rayures et la suggestion de quelqu'un m'ont convaincue d'installer Xubuntu. Je viens d'installer Xubuntu 14.04.4. LTS. Mais voilà: Xubuntu fait la même chose qu'Ubuntu avec l'écran.
Je décrit le problème: Je travaille un temps (environ 15 à 20 min. puis tout à coup, l'écran devient illisible avec tout plein de rayures. Si je réussis à travers les lignes à trouver une fenêtre déjà ouverte: Je la prends, je la bouge, et les rayures disparaissent au fur et à mesure que la fenêtre oblige un rafraîchissement.
Voici des lignes (EE) de mon fichier Xorg.0.log en espérant que ceci puisse vous aider:
(EE) [mi] EQ overflowing. Additional events will be discarded until existing events are processed.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x48) [0x559d80dea308]
(EE) 1: /usr/bin/X (mieqEnqueue+0x22b) [0x559d80dcce9b]
(EE) 2: /usr/bin/X (QueuePointerEvents+0x52) [0x559d80cb4232]
(EE) 3: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f6db9ebe000+0x5f97) [0x7f6db9ec3f97]
(EE) 4: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f6db9ebe000+0x6795) [0x7f6db9ec4795]
(EE) 5: /usr/bin/X (0x559d80c49000+0x916a8) [0x559d80cda6a8]
(EE) 6: /usr/bin/X (0x559d80c49000+0xb9640) [0x559d80d02640]
(EE) 7: /lib/x86_64-linux-gnu/libc.so.6 (0x7f6dbfc14000+0x36d40) [0x7f6dbfc4ad40]
(EE) 8: /lib/x86_64-linux-gnu/libc.so.6 (ioctl+0x7) [0x7f6dbfd05337]
(EE) 9: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f6dbba04000+0x129d1) [0x7f6dbba169d1]
(EE) 10: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f6dbba04000+0x2e5ca) [0x7f6dbba325ca]
(EE) 11: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f6dbba04000+0x419ae) [0x7f6dbba459ae]
(EE) 12: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f6dbba04000+0x59abe) [0x7f6dbba5dabe]
(EE) 13: /usr/bin/X (_CallCallbacks+0x34) [0x559d80ca2444]
(EE) 14: /usr/bin/X (WriteToClient+0x1a6) [0x559d80dedbf6]
(EE) 15: /usr/bin/X (WriteEventsToClient+0x252) [0x559d80ca80d2]
(EE) 16: /usr/bin/X (0x559d80c49000+0x126b5a) [0x559d80d6fb5a]
(EE) 17: /usr/bin/X (DamageReportDamage+0x18d) [0x559d80d7569d]
(EE) 18: /usr/bin/X (0x559d80c49000+0x12cd6a) [0x559d80d75d6a]
(EE) 19: /usr/bin/X (0x559d80c49000+0x130017) [0x559d80d79017]
(EE) 20: /usr/bin/X (0x559d80c49000+0x5081d) [0x559d80c9981d]
(EE) 21: /usr/bin/X (0x559d80c49000+0x5433e) [0x559d80c9d33e]
(EE) 22: /usr/bin/X (0x559d80c49000+0x5818b) [0x559d80ca118b]
(EE) 23: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0x7f6dbfc35ec5]
(EE) 24: /usr/bin/X (0x559d80c49000+0x4370e) [0x559d80c8c70e]
(EE)
(EE) [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
(EE) [mi] mieq is *NOT* the cause. It is a victim.
[ 2180.294] [mi] Increasing EQ size to 1024 to prevent dropped events.
[ 2180.311] [mi] EQ processing has resumed after 83 dropped events.
[ 2180.311] [mi] This may be caused my a misbehaving driver monopolizing the server's resources.Modération : merci à l'avenir d'utiliser les balises code (explications ici).
Dernière modification par MonPersoPrefereEstMortEnc (Le 22/03/2016, à 18:53)
Hors ligne
#2 Le 20/03/2016, à 07:45
- F50
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
Salut,
Donne le retour de :
lspci -v#3 Le 20/03/2016, à 09:56
- Karpon
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
Bonjour,
A tout hasard, et sans prétentions, j'ai eu le même souci, souci qui disparaît si on accepte les pilotes nvedia (sous réserve que les cartes utilisées soient de cette marque, évidemment...).
Bon, je ne suis pas un expert, donc, prudence...
Machine assemblée perso - xubuntu 20.04 - Xfce 4.14
Carte-mère : MSI H110 PRO D - Ram DDR3 16 G° - CPU Intel S1151
Carte graphique : NVIDIA Corporation - GeForce 210/PCIe/SSE2 - Vers 3.3.3 NVIDIA 340.108
Hors ligne
#4 Le 20/03/2016, à 10:07
- moko138
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
F50 est un spécialiste. 
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#5 Le 20/03/2016, à 11:03
- F50
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
Comme dirait Oscar Wilde :
"Un spécialiste est un homme qui sait de plus en plus de choses, sur un sujet de plus en plus restreint, et qui finit par tout savoir… sur rien."
#6 Le 20/03/2016, à 11:06
- Compte supprimé
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
L'auteur de ce sujet est au Québec. C'est la nuit pour encore un moment 
#7 Le 20/03/2016, à 22:52
- MonPersoPrefereEstMortEnc
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
Je suis effectivement au Québec... Alors désolée pour les délais de réponse.
Alors voici la réponse du lspci -v
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
Subsystem: Gateway, Inc. Device 7201
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Gateway, Inc. Device 7201
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at 70100000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 20e0 [size=8]
Memory at 60000000 (32-bit, prefetchable) [size=256M]
Memory at 70180000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
Subsystem: Gateway, Inc. Device 7201
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at 701c0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-f81fffff
Prefetchable memory behind bridge: 00000000f8200000-00000000f83fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f8400000-f85fffff
Prefetchable memory behind bridge: 00000000f8600000-00000000f87fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f8800000-f89fffff
Prefetchable memory behind bridge: 00000000f8a00000-00000000f8bfffff
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Gateway, Inc. Device 7201
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 2080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Gateway, Inc. Device 7201
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 2060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Gateway, Inc. Device 7201
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 2040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Gateway, Inc. Device 7201
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 2020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Gateway, Inc. Device 7201
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at 701c4000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 70000000-700fffff
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
Subsystem: Gateway, Inc. Device 7201
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Gateway, Inc. Device 7201
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4
I/O ports at 0170 [size=8]
I/O ports at 0374
I/O ports at 20b0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Gateway, Inc. Device 7201
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at 20c8 [size=8]
I/O ports at 20ec [size=4]
I/O ports at 20c0 [size=8]
I/O ports at 20e8 [size=4]
I/O ports at 20a0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
Subsystem: Gateway, Inc. Device 7201
Flags: medium devsel, IRQ 11
I/O ports at 2000 [size=32]
04:05.0 Communication controller: Conexant Systems, Inc. Device 2f40
Subsystem: Conexant Systems, Inc. Device 2000
Flags: bus master, fast Back2Back, medium devsel, latency 32, IRQ 10
Memory at 70000000 (32-bit, non-prefetchable) [size=64K]
I/O ports at 1040 [size=8]
Capabilities: <access denied>
04:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 01)
Subsystem: Gateway, Inc. Device 7201
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at 70010000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 1000 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100Modération - Rappel : merci à l'avenir d'utiliser les balises code (explications ici).
-Merci Modération. Je suis nouvelle alors je fais encore tout plein d'erreur. Je le ferai à l'avenir.
Dernière modification par MonPersoPrefereEstMortEnc (Le 21/03/2016, à 00:47)
Hors ligne
#8 Le 21/03/2016, à 00:21
- Tristan07
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
Salut,
Si je ne dis pas trop de conneries la carte graphique est INtel, il ne devrait pas y avoir trop de problème 
A tout hasard, dans les paramètres systeme mais cela concerne le "screen tearing" il y a une option décochée par défaut (dernier onglet de mémoire) concernant "synchroniser vertical blank"
Debian 9 Stable sur portable et poste fixe
Hors ligne
#9 Le 21/03/2016, à 00:22
- MonPersoPrefereEstMortEnc
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
Juste en info supplémentaire je crois importante: Mardi passé, j'ai installé Ubuntu 32 bit, et avec lui je n'avais pas de problème d'écran. Mais comme il y avait plusieurs logiciels que je ne pouvais pas installer, j'ai décidé d'installer Ubuntu 64 bit avant hier. Les problèmes sont venus avec ces versions de 64 bits... si c'est lié, je ne suis pas certaine.
Hors ligne
#10 Le 21/03/2016, à 07:11
- F50
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
Tu as en effet une intel qui pose rarement problème. Quelle est précisément ta machine ?
En attendant, en début de session lance la commande top dans un terminal, surveille le régulièrement pour voir si quelque chose ne prend pas de la ressource anormalement (cpu %), particulièrement lorsque le dysfonctionnement se produit. Va aussi dans Peaufinage des fenêtres et désactive le compositeur, histoire de tester la réaction général.
Donne le retour de cette commande au début de la session et lors du dysfonctionnement :
cat /var/log/Xorg.0.log#11 Le 21/03/2016, à 18:21
- Compte supprimé
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
https://forum.ubuntu-fr.org/viewtopic.p … #p21481184
Intel Pentium 4HT H5088 Processeur 641 3.20GHz
1.5 G de RAM
Peux-tu donner la marque et le nom complet de ta machine stp ?
Dernière modification par Compte supprimé (Le 21/03/2016, à 18:22)
#12 Le 21/03/2016, à 18:39
- moko138
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
lspci -v a écrit :
04:05.0 Communication controller: Conexant Systems, Inc. Device 2f40
Subsystem: Conexant Systems, Inc. Device 2000
Flags: bus master, fast Back2Back, medium devsel, latency 32, IRQ 10
N'y a-t-il pas de prise RJ45 sur ta tour, pour que tu laisses (apparemment) une carte réseau, qui consomme une IRQ ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#13 Le 21/03/2016, à 18:49
- MonPersoPrefereEstMortEnc
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
moko138 a écrit :
N'y a-t-il pas de prise RJ45 sur ta tour, pour que tu laisses (apparemment) une carte réseau, qui consomme une IRQ ?
Cet ordi n'est pas branché par WiFi. Il est directement branché par un fil à mon modem Internet.
Le hardware, je ne m'y connais que vraiment peu. Donc désolée si ma réponse n'est pas celle attendu. En fait, je ne comprends pas comment mon branchement RJ45 pourrait nuire à l'affichage... mais comme je l'ai dit, le hardware je ne m'y connais pas.
Hors ligne
#14 Le 21/03/2016, à 18:55
- MonPersoPrefereEstMortEnc
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
Tamarou a écrit :
Peux-tu donner la marque et le nom complet de ta machine stp ?
C'est un emachines H5088
Hors ligne
#15 Le 21/03/2016, à 19:04
- MonPersoPrefereEstMortEnc
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
F50 a écrit :
Donne le retour de cette commande au début de la session :
cat /var/log/Xorg.0.log
Donc voici mon début de session:
[ 25.489]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 25.489] X Protocol Version 11, Revision 0
[ 25.489] Build Operating System: Linux 3.19.0-43-generic x86_64 Ubuntu
[ 25.489] Current Operating System: Linux Xubu14 4.2.0-34-generic #39~14.04.1-Ubuntu SMP Fri Mar 11 11:38:02 UTC 2016 x86_64
[ 25.489] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-34-generic root=UUID=a02aba4c-598e-4fa4-916a-abe0a5165e19 ro quiet splash vt.handoff=7
[ 25.489] Build Date: 15 January 2016 10:17:33PM
[ 25.489] xorg-server 2:1.17.2-1ubuntu9.1~trusty1 (For technical support please see http://www.ubuntu.com/support)
[ 25.489] Current version of pixman: 0.30.2
[ 25.489] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.489] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.490] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 21 12:58:44 2016
[ 25.516] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 25.517] (==) No Layout section. Using the first Screen section.
[ 25.517] (==) No screen section available. Using defaults.
[ 25.517] (**) |-->Screen "Default Screen Section" (0)
[ 25.517] (**) | |-->Monitor "<default monitor>"
[ 25.518] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 25.518] (==) Automatically adding devices
[ 25.518] (==) Automatically enabling devices
[ 25.518] (==) Automatically adding GPU devices
[ 25.518] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 25.518] Entry deleted from font path.
[ 25.518] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 25.518] Entry deleted from font path.
[ 25.518] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 25.518] Entry deleted from font path.
[ 25.518] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 25.518] Entry deleted from font path.
[ 25.519] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 25.519] Entry deleted from font path.
[ 25.519] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 25.519] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 25.519] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 25.519] (II) Loader magic: 0x55f7bf386c80
[ 25.519] (II) Module ABI versions:
[ 25.519] X.Org ANSI C Emulation: 0.4
[ 25.519] X.Org Video Driver: 19.0
[ 25.519] X.Org XInput driver : 21.0
[ 25.519] X.Org Server Extension : 9.0
[ 25.519] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 25.522] (--) PCI:*(0:0:2:0) 8086:2772:107b:7201 rev 2, Mem @ 0x70100000/524288, 0x60000000/268435456, 0x70180000/262144, I/O @ 0x000020e0/8
[ 25.522] (II) LoadModule: "glx"
[ 25.539] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.654] (II) Module glx: vendor="X.Org Foundation"
[ 25.654] compiled for 1.17.2, module version = 1.0.0
[ 25.654] ABI class: X.Org Server Extension, version 9.0
[ 25.654] (==) AIGLX enabled
[ 25.654] (==) Matched intel as autoconfigured driver 0
[ 25.654] (==) Matched intel as autoconfigured driver 1
[ 25.654] (==) Matched modesetting as autoconfigured driver 2
[ 25.654] (==) Matched fbdev as autoconfigured driver 3
[ 25.654] (==) Matched vesa as autoconfigured driver 4
[ 25.654] (==) Assigned the driver to the xf86ConfigLayout
[ 25.654] (II) LoadModule: "intel"
[ 25.655] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 25.661] (II) Module intel: vendor="X.Org Foundation"
[ 25.661] compiled for 1.17.2, module version = 2.99.917
[ 25.661] Module class: X.Org Video Driver
[ 25.661] ABI class: X.Org Video Driver, version 19.0
[ 25.661] (II) LoadModule: "modesetting"
[ 25.662] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 25.662] (II) Module modesetting: vendor="X.Org Foundation"
[ 25.662] compiled for 1.17.2, module version = 1.17.2
[ 25.662] Module class: X.Org Video Driver
[ 25.662] ABI class: X.Org Video Driver, version 19.0
[ 25.662] (II) LoadModule: "fbdev"
[ 25.663] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 25.663] (II) Module fbdev: vendor="X.Org Foundation"
[ 25.663] compiled for 1.17.2, module version = 0.4.4
[ 25.663] Module class: X.Org Video Driver
[ 25.663] ABI class: X.Org Video Driver, version 19.0
[ 25.663] (II) LoadModule: "vesa"
[ 25.663] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 25.664] (II) Module vesa: vendor="X.Org Foundation"
[ 25.664] compiled for 1.17.2, module version = 2.3.4
[ 25.664] Module class: X.Org Video Driver
[ 25.664] ABI class: X.Org Video Driver, version 19.0
[ 25.664] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 25.665] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 25.665] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 25.665] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 25.665] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 25.665] (II) FBDEV: driver for framebuffer: fbdev
[ 25.665] (II) VESA: driver for VESA chipsets: vesa
[ 25.665] (++) using VT number 7
[ 25.666] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150522
[ 25.666] (II) intel(0): SNA compiled: xserver-xorg-video-intel-lts-wily 2:2.99.917+git20150808-0ubuntu4~trusty2 (Adam Conrad <adconrad@ubuntu.com>)
[ 25.666] (II) intel(0): SNA compiled for use with valgrind
[ 25.666] (WW) Falling back to old probe method for modesetting
[ 25.666] (WW) Falling back to old probe method for fbdev
[ 25.666] (II) Loading sub module "fbdevhw"
[ 25.666] (II) LoadModule: "fbdevhw"
[ 25.667] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 25.667] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 25.667] compiled for 1.17.2, module version = 0.0.2
[ 25.667] ABI class: X.Org Video Driver, version 19.0
[ 25.667] (WW) Falling back to old probe method for vesa
[ 25.668] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945G
[ 25.668] (--) intel(0): CPU: x86-64, sse2, sse3; using a maximum of 1 threads
[ 25.668] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 25.668] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 25.668] (==) intel(0): RGB weight 888
[ 25.668] (==) intel(0): Default visual is TrueColor
[ 25.669] (II) intel(0): Output VGA1 has no monitor section
[ 25.669] (II) intel(0): Enabled output VGA1
[ 25.669] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 25.669] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 25.669] (II) intel(0): Enabled output VIRTUAL1
[ 25.669] (--) intel(0): Output VGA1 using initial mode 1280x1024 on pipe 0
[ 25.669] (==) intel(0): TearFree disabled
[ 25.669] (==) intel(0): DPI set to (96, 96)
[ 25.669] (II) Loading sub module "dri2"
[ 25.669] (II) LoadModule: "dri2"
[ 25.670] (II) Module "dri2" already built-in
[ 25.670] (II) Loading sub module "present"
[ 25.670] (II) LoadModule: "present"
[ 25.670] (II) Module "present" already built-in
[ 25.670] (II) UnloadModule: "modesetting"
[ 25.670] (II) Unloading modesetting
[ 25.670] (II) UnloadModule: "fbdev"
[ 25.670] (II) Unloading fbdev
[ 25.670] (II) UnloadSubModule: "fbdevhw"
[ 25.670] (II) Unloading fbdevhw
[ 25.670] (II) UnloadModule: "vesa"
[ 25.670] (II) Unloading vesa
[ 25.670] (==) Depth 24 pixmap format is 32 bpp
[ 25.671] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 25.671] (==) intel(0): Backing store enabled
[ 25.671] (==) intel(0): Silken mouse enabled
[ 25.671] (II) intel(0): HW Cursor enabled
[ 25.671] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 25.671] (==) intel(0): DPMS enabled
[ 25.671] (==) intel(0): Display hotplug detection enabled
[ 25.671] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 25.671] (II) intel(0): [DRI2] Setup complete
[ 25.671] (II) intel(0): [DRI2] DRI driver: i915
[ 25.671] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 25.672] (II) intel(0): direct rendering: DRI2 enabled
[ 25.672] (II) intel(0): hardware support for Present enabled
[ 25.672] (--) RandR disabled
[ 25.701] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 25.701] (II) AIGLX: enabled GLX_ARB_create_context
[ 25.701] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 25.701] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 25.702] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 25.702] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 25.702] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 25.702] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 25.702] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 25.702] (II) AIGLX: Loaded and initialized i915
[ 25.702] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 25.720] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 25.721] (II) intel(0): Setting screen physical size to 338 x 270
[ 25.740] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 25.750] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 25.750] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.750] (II) LoadModule: "evdev"
[ 25.750] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.769] (II) Module evdev: vendor="X.Org Foundation"
[ 25.769] compiled for 1.17.2, module version = 2.9.2
[ 25.769] Module class: X.Org XInput Driver
[ 25.769] ABI class: X.Org XInput driver, version 21.0
[ 25.769] (II) Using input driver 'evdev' for 'Power Button'
[ 25.769] (**) Power Button: always reports core events
[ 25.770] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 25.770] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 25.770] (--) evdev: Power Button: Found keys
[ 25.770] (II) evdev: Power Button: Configuring as keyboard
[ 25.770] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 25.770] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 25.770] (**) Option "xkb_rules" "evdev"
[ 25.770] (**) Option "xkb_model" "pc105"
[ 25.770] (**) Option "xkb_layout" "ca"
[ 25.775] (II) XKB: reuse xkmfile /var/lib/xkb/server-3BCFF748FFB6BCDACC88715CBF6A9DF905CD3181.xkm
[ 25.777] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 25.777] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 25.777] (II) Using input driver 'evdev' for 'Sleep Button'
[ 25.777] (**) Sleep Button: always reports core events
[ 25.777] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[ 25.777] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 25.777] (--) evdev: Sleep Button: Found keys
[ 25.777] (II) evdev: Sleep Button: Configuring as keyboard
[ 25.777] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 25.777] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 25.777] (**) Option "xkb_rules" "evdev"
[ 25.777] (**) Option "xkb_model" "pc105"
[ 25.777] (**) Option "xkb_layout" "ca"
[ 25.779] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event4)
[ 25.780] (II) No input driver specified, ignoring this device.
[ 25.780] (II) This device may have been added with another device file.
[ 25.781] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
[ 25.781] (II) No input driver specified, ignoring this device.
[ 25.781] (II) This device may have been added with another device file.
[ 25.782] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
[ 25.782] (II) No input driver specified, ignoring this device.
[ 25.782] (II) This device may have been added with another device file.
[ 25.782] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event7)
[ 25.782] (II) No input driver specified, ignoring this device.
[ 25.782] (II) This device may have been added with another device file.
[ 25.783] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event8)
[ 25.783] (II) No input driver specified, ignoring this device.
[ 25.783] (II) This device may have been added with another device file.
[ 25.785] (II) config/udev: Adding input device Microsoft Microsoft Basic Optical Mouse v2.0 (/dev/input/event3)
[ 25.785] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : Applying InputClass "evdev pointer catchall"
[ 25.785] (II) Using input driver 'evdev' for 'Microsoft Microsoft Basic Optical Mouse v2.0 '
[ 25.785] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : always reports core events
[ 25.785] (**) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Device: "/dev/input/event3"
[ 25.840] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Vendor 0x45e Product 0xcb
[ 25.840] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Found 3 mouse buttons
[ 25.840] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Found scroll wheel(s)
[ 25.840] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Found relative axes
[ 25.840] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Found x and y relative axes
[ 25.840] (II) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Configuring as mouse
[ 25.840] (II) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Adding scrollwheel support
[ 25.840] (**) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : YAxisMapping: buttons 4 and 5
[ 25.840] (**) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.840] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:045E:00CB.0001/input/input3/event3"
[ 25.840] (II) XINPUT: Adding extended input device "Microsoft Microsoft Basic Optical Mouse v2.0 " (type: MOUSE, id 8)
[ 25.840] (II) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : initialized for relative axes.
[ 25.841] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) keeping acceleration scheme 1
[ 25.841] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration profile 0
[ 25.841] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration factor: 2.000
[ 25.841] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration threshold: 4
[ 25.842] (II) config/udev: Adding input device Microsoft Microsoft Basic Optical Mouse v2.0 (/dev/input/mouse0)
[ 25.842] (II) No input driver specified, ignoring this device.
[ 25.842] (II) This device may have been added with another device file.
[ 25.843] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 25.843] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 25.843] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 25.843] (**) AT Translated Set 2 keyboard: always reports core events
[ 25.843] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 25.843] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 25.843] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 25.843] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 25.843] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 25.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 25.843] (**) Option "xkb_rules" "evdev"
[ 25.843] (**) Option "xkb_model" "pc105"
[ 25.843] (**) Option "xkb_layout" "ca"
[ 29.373] (II) intel(0): EDID vendor "DEL", prod id 28686
[ 29.373] (II) intel(0): Using EDID range info for horizontal sync
[ 29.373] (II) intel(0): Using EDID range info for vertical refresh
[ 29.373] (II) intel(0): Printing DDC gathered Modelines:
[ 29.373] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 29.373] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 29.373] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 29.373] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 29.373] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 29.373] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 29.373] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 29.373] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 29.373] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 29.373] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)D'ici 15 à 20 min, je devrais avoir un dysfonctionnement et si l'ordi ne plante pas (ce qui arrive de temps à autres avec le brouillage d'écran, je vais pouvoir vous donner la suite.
Hors ligne
#16 Le 21/03/2016, à 19:12
- MonPersoPrefereEstMortEnc
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
F50 a écrit :
Donne le retour de cette commande lors du dysfonctionnement :
cat /var/log/Xorg.0.log
Voici le dysfonctionnement:
dianedany@Xubu14:~$ cat /var/log/Xorg.0.log
[ 25.489]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 25.489] X Protocol Version 11, Revision 0
[ 25.489] Build Operating System: Linux 3.19.0-43-generic x86_64 Ubuntu
[ 25.489] Current Operating System: Linux Xubu14 4.2.0-34-generic #39~14.04.1-Ubuntu SMP Fri Mar 11 11:38:02 UTC 2016 x86_64
[ 25.489] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-34-generic root=UUID=a02aba4c-598e-4fa4-916a-abe0a5165e19 ro quiet splash vt.handoff=7
[ 25.489] Build Date: 15 January 2016 10:17:33PM
[ 25.489] xorg-server 2:1.17.2-1ubuntu9.1~trusty1 (For technical support please see http://www.ubuntu.com/support)
[ 25.489] Current version of pixman: 0.30.2
[ 25.489] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.489] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.490] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 21 12:58:44 2016
[ 25.516] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 25.517] (==) No Layout section. Using the first Screen section.
[ 25.517] (==) No screen section available. Using defaults.
[ 25.517] (**) |-->Screen "Default Screen Section" (0)
[ 25.517] (**) | |-->Monitor "<default monitor>"
[ 25.518] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 25.518] (==) Automatically adding devices
[ 25.518] (==) Automatically enabling devices
[ 25.518] (==) Automatically adding GPU devices
[ 25.518] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 25.518] Entry deleted from font path.
[ 25.518] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 25.518] Entry deleted from font path.
[ 25.518] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 25.518] Entry deleted from font path.
[ 25.518] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 25.518] Entry deleted from font path.
[ 25.519] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 25.519] Entry deleted from font path.
[ 25.519] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 25.519] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 25.519] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 25.519] (II) Loader magic: 0x55f7bf386c80
[ 25.519] (II) Module ABI versions:
[ 25.519] X.Org ANSI C Emulation: 0.4
[ 25.519] X.Org Video Driver: 19.0
[ 25.519] X.Org XInput driver : 21.0
[ 25.519] X.Org Server Extension : 9.0
[ 25.519] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 25.522] (--) PCI:*(0:0:2:0) 8086:2772:107b:7201 rev 2, Mem @ 0x70100000/524288, 0x60000000/268435456, 0x70180000/262144, I/O @ 0x000020e0/8
[ 25.522] (II) LoadModule: "glx"
[ 25.539] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.654] (II) Module glx: vendor="X.Org Foundation"
[ 25.654] compiled for 1.17.2, module version = 1.0.0
[ 25.654] ABI class: X.Org Server Extension, version 9.0
[ 25.654] (==) AIGLX enabled
[ 25.654] (==) Matched intel as autoconfigured driver 0
[ 25.654] (==) Matched intel as autoconfigured driver 1
[ 25.654] (==) Matched modesetting as autoconfigured driver 2
[ 25.654] (==) Matched fbdev as autoconfigured driver 3
[ 25.654] (==) Matched vesa as autoconfigured driver 4
[ 25.654] (==) Assigned the driver to the xf86ConfigLayout
[ 25.654] (II) LoadModule: "intel"
[ 25.655] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 25.661] (II) Module intel: vendor="X.Org Foundation"
[ 25.661] compiled for 1.17.2, module version = 2.99.917
[ 25.661] Module class: X.Org Video Driver
[ 25.661] ABI class: X.Org Video Driver, version 19.0
[ 25.661] (II) LoadModule: "modesetting"
[ 25.662] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 25.662] (II) Module modesetting: vendor="X.Org Foundation"
[ 25.662] compiled for 1.17.2, module version = 1.17.2
[ 25.662] Module class: X.Org Video Driver
[ 25.662] ABI class: X.Org Video Driver, version 19.0
[ 25.662] (II) LoadModule: "fbdev"
[ 25.663] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 25.663] (II) Module fbdev: vendor="X.Org Foundation"
[ 25.663] compiled for 1.17.2, module version = 0.4.4
[ 25.663] Module class: X.Org Video Driver
[ 25.663] ABI class: X.Org Video Driver, version 19.0
[ 25.663] (II) LoadModule: "vesa"
[ 25.663] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 25.664] (II) Module vesa: vendor="X.Org Foundation"
[ 25.664] compiled for 1.17.2, module version = 2.3.4
[ 25.664] Module class: X.Org Video Driver
[ 25.664] ABI class: X.Org Video Driver, version 19.0
[ 25.664] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 25.665] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 25.665] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 25.665] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 25.665] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 25.665] (II) FBDEV: driver for framebuffer: fbdev
[ 25.665] (II) VESA: driver for VESA chipsets: vesa
[ 25.665] (++) using VT number 7
[ 25.666] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150522
[ 25.666] (II) intel(0): SNA compiled: xserver-xorg-video-intel-lts-wily 2:2.99.917+git20150808-0ubuntu4~trusty2 (Adam Conrad <adconrad@ubuntu.com>)
[ 25.666] (II) intel(0): SNA compiled for use with valgrind
[ 25.666] (WW) Falling back to old probe method for modesetting
[ 25.666] (WW) Falling back to old probe method for fbdev
[ 25.666] (II) Loading sub module "fbdevhw"
[ 25.666] (II) LoadModule: "fbdevhw"
[ 25.667] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 25.667] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 25.667] compiled for 1.17.2, module version = 0.0.2
[ 25.667] ABI class: X.Org Video Driver, version 19.0
[ 25.667] (WW) Falling back to old probe method for vesa
[ 25.668] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945G
[ 25.668] (--) intel(0): CPU: x86-64, sse2, sse3; using a maximum of 1 threads
[ 25.668] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 25.668] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 25.668] (==) intel(0): RGB weight 888
[ 25.668] (==) intel(0): Default visual is TrueColor
[ 25.669] (II) intel(0): Output VGA1 has no monitor section
[ 25.669] (II) intel(0): Enabled output VGA1
[ 25.669] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 25.669] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 25.669] (II) intel(0): Enabled output VIRTUAL1
[ 25.669] (--) intel(0): Output VGA1 using initial mode 1280x1024 on pipe 0
[ 25.669] (==) intel(0): TearFree disabled
[ 25.669] (==) intel(0): DPI set to (96, 96)
[ 25.669] (II) Loading sub module "dri2"
[ 25.669] (II) LoadModule: "dri2"
[ 25.670] (II) Module "dri2" already built-in
[ 25.670] (II) Loading sub module "present"
[ 25.670] (II) LoadModule: "present"
[ 25.670] (II) Module "present" already built-in
[ 25.670] (II) UnloadModule: "modesetting"
[ 25.670] (II) Unloading modesetting
[ 25.670] (II) UnloadModule: "fbdev"
[ 25.670] (II) Unloading fbdev
[ 25.670] (II) UnloadSubModule: "fbdevhw"
[ 25.670] (II) Unloading fbdevhw
[ 25.670] (II) UnloadModule: "vesa"
[ 25.670] (II) Unloading vesa
[ 25.670] (==) Depth 24 pixmap format is 32 bpp
[ 25.671] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 25.671] (==) intel(0): Backing store enabled
[ 25.671] (==) intel(0): Silken mouse enabled
[ 25.671] (II) intel(0): HW Cursor enabled
[ 25.671] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 25.671] (==) intel(0): DPMS enabled
[ 25.671] (==) intel(0): Display hotplug detection enabled
[ 25.671] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 25.671] (II) intel(0): [DRI2] Setup complete
[ 25.671] (II) intel(0): [DRI2] DRI driver: i915
[ 25.671] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 25.672] (II) intel(0): direct rendering: DRI2 enabled
[ 25.672] (II) intel(0): hardware support for Present enabled
[ 25.672] (--) RandR disabled
[ 25.701] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 25.701] (II) AIGLX: enabled GLX_ARB_create_context
[ 25.701] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 25.701] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 25.702] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 25.702] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 25.702] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 25.702] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 25.702] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 25.702] (II) AIGLX: Loaded and initialized i915
[ 25.702] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 25.720] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 25.721] (II) intel(0): Setting screen physical size to 338 x 270
[ 25.740] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 25.750] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 25.750] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.750] (II) LoadModule: "evdev"
[ 25.750] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.769] (II) Module evdev: vendor="X.Org Foundation"
[ 25.769] compiled for 1.17.2, module version = 2.9.2
[ 25.769] Module class: X.Org XInput Driver
[ 25.769] ABI class: X.Org XInput driver, version 21.0
[ 25.769] (II) Using input driver 'evdev' for 'Power Button'
[ 25.769] (**) Power Button: always reports core events
[ 25.770] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 25.770] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 25.770] (--) evdev: Power Button: Found keys
[ 25.770] (II) evdev: Power Button: Configuring as keyboard
[ 25.770] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 25.770] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 25.770] (**) Option "xkb_rules" "evdev"
[ 25.770] (**) Option "xkb_model" "pc105"
[ 25.770] (**) Option "xkb_layout" "ca"
[ 25.775] (II) XKB: reuse xkmfile /var/lib/xkb/server-3BCFF748FFB6BCDACC88715CBF6A9DF905CD3181.xkm
[ 25.777] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 25.777] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 25.777] (II) Using input driver 'evdev' for 'Sleep Button'
[ 25.777] (**) Sleep Button: always reports core events
[ 25.777] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[ 25.777] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 25.777] (--) evdev: Sleep Button: Found keys
[ 25.777] (II) evdev: Sleep Button: Configuring as keyboard
[ 25.777] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 25.777] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 25.777] (**) Option "xkb_rules" "evdev"
[ 25.777] (**) Option "xkb_model" "pc105"
[ 25.777] (**) Option "xkb_layout" "ca"
[ 25.779] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event4)
[ 25.780] (II) No input driver specified, ignoring this device.
[ 25.780] (II) This device may have been added with another device file.
[ 25.781] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
[ 25.781] (II) No input driver specified, ignoring this device.
[ 25.781] (II) This device may have been added with another device file.
[ 25.782] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
[ 25.782] (II) No input driver specified, ignoring this device.
[ 25.782] (II) This device may have been added with another device file.
[ 25.782] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event7)
[ 25.782] (II) No input driver specified, ignoring this device.
[ 25.782] (II) This device may have been added with another device file.
[ 25.783] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event8)
[ 25.783] (II) No input driver specified, ignoring this device.
[ 25.783] (II) This device may have been added with another device file.
[ 25.785] (II) config/udev: Adding input device Microsoft Microsoft Basic Optical Mouse v2.0 (/dev/input/event3)
[ 25.785] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : Applying InputClass "evdev pointer catchall"
[ 25.785] (II) Using input driver 'evdev' for 'Microsoft Microsoft Basic Optical Mouse v2.0 '
[ 25.785] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : always reports core events
[ 25.785] (**) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Device: "/dev/input/event3"
[ 25.840] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Vendor 0x45e Product 0xcb
[ 25.840] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Found 3 mouse buttons
[ 25.840] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Found scroll wheel(s)
[ 25.840] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Found relative axes
[ 25.840] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Found x and y relative axes
[ 25.840] (II) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Configuring as mouse
[ 25.840] (II) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Adding scrollwheel support
[ 25.840] (**) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : YAxisMapping: buttons 4 and 5
[ 25.840] (**) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.840] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:045E:00CB.0001/input/input3/event3"
[ 25.840] (II) XINPUT: Adding extended input device "Microsoft Microsoft Basic Optical Mouse v2.0 " (type: MOUSE, id 8)
[ 25.840] (II) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : initialized for relative axes.
[ 25.841] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) keeping acceleration scheme 1
[ 25.841] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration profile 0
[ 25.841] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration factor: 2.000
[ 25.841] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration threshold: 4
[ 25.842] (II) config/udev: Adding input device Microsoft Microsoft Basic Optical Mouse v2.0 (/dev/input/mouse0)
[ 25.842] (II) No input driver specified, ignoring this device.
[ 25.842] (II) This device may have been added with another device file.
[ 25.843] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 25.843] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 25.843] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 25.843] (**) AT Translated Set 2 keyboard: always reports core events
[ 25.843] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 25.843] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 25.843] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 25.843] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 25.843] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 25.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 25.843] (**) Option "xkb_rules" "evdev"
[ 25.843] (**) Option "xkb_model" "pc105"
[ 25.843] (**) Option "xkb_layout" "ca"
[ 29.373] (II) intel(0): EDID vendor "DEL", prod id 28686
[ 29.373] (II) intel(0): Using EDID range info for horizontal sync
[ 29.373] (II) intel(0): Using EDID range info for vertical refresh
[ 29.373] (II) intel(0): Printing DDC gathered Modelines:
[ 29.373] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 29.373] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 29.373] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 29.373] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 29.373] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 29.373] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 29.373] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 29.373] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 29.373] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 29.373] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
(EE) [mi] EQ overflowing. Additional events will be discarded until existing events are processed.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x48) [0x55f7bf103308]
(EE) 1: /usr/bin/X (mieqEnqueue+0x22b) [0x55f7bf0e5e9b]
(EE) 2: /usr/bin/X (QueuePointerEvents+0x52) [0x55f7befcd232]
(EE) 3: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f78039d6000+0x5f97) [0x7f78039dbf97]
(EE) 4: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f78039d6000+0x6795) [0x7f78039dc795]
(EE) 5: /usr/bin/X (0x55f7bef62000+0x916a8) [0x55f7beff36a8]
(EE) 6: /usr/bin/X (0x55f7bef62000+0xb9640) [0x55f7bf01b640]
(EE) 7: /lib/x86_64-linux-gnu/libc.so.6 (0x7f780972c000+0x36d40) [0x7f7809762d40]
(EE) 8: /lib/x86_64-linux-gnu/libc.so.6 (ioctl+0x7) [0x7f780981d337]
(EE) 9: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f780551c000+0x23e6e) [0x7f780553fe6e]
(EE) 10: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f780551c000+0x27434) [0x7f7805543434]
(EE) 11: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f780551c000+0x5a1e3) [0x7f78055761e3]
(EE) 12: /usr/bin/X (BlockHandler+0x44) [0x55f7befbaab4]
(EE) 13: /usr/bin/X (WaitForSomething+0x144) [0x55f7bf1005f4]
(EE) 14: /usr/bin/X (0x55f7bef62000+0x54091) [0x55f7befb6091]
(EE) 15: /usr/bin/X (0x55f7bef62000+0x5818b) [0x55f7befba18b]
(EE) 16: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0x7f780974dec5]
(EE) 17: /usr/bin/X (0x55f7bef62000+0x4370e) [0x55f7befa570e]
(EE)
(EE) [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
(EE) [mi] mieq is *NOT* the cause. It is a victim.
[ 409.844] [mi] Increasing EQ size to 1024 to prevent dropped events.
[ 409.846] [mi] EQ processing has resumed after 25 dropped events.
[ 409.846] [mi] This may be caused my a misbehavinJe ne suis pas certaine que ce soit le plus "frais" après le dysfonctionnement, car j'ai du m'y reprendre 2 ou 3 fois car le terminal n'apparaissait qu'aux travers des lignes et j'ai du y aller à l'aveuglette. Je ne sais même pas si ce que j'ai copié comprends tout... parce que, encore une fois, j'y allais à tatons sans vraiment voir ce que je faisais.
Par chance, Firefox s'affiche bien une fois que j'ai rétrécie et réagrandit la fenêtre.
Hors ligne
#17 Le 21/03/2016, à 20:35
- Hugopix
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
#tapelinscruste
Es-ce que ton écran est semblable à celui-ci screenshot
Si oui j'avais déjà ouvert un topic ici j'ai du me rabattre sur un environnement de bureau Xfce pour éviter ces bug
Mais si il y a une nouvelle solution je suis preneur 
Pensez à passer vos sujets [Résolu] .
Hors ligne
#18 Le 21/03/2016, à 21:16
- MonPersoPrefereEstMortEnc
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
Hugopix a écrit :
Es-ce que ton écran est semblable à celui-ci
Non, mon écran ressemble à ceci:
Hors ligne
#19 Le 21/03/2016, à 21:26
- F50
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
C'est pas un 32 bit ce processeur ?
#20 Le 21/03/2016, à 21:38
- MonPersoPrefereEstMortEnc
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
F50 a écrit :
C'est pas un 32 bit ce processeur ?
Selon le
site d'Intel les processeurs 641 sont des 64 bits. À moins que ce qui est inscrit sur ma tour ne soit pas ce qu'il y ait dedans... mais ça m'étonnerait beaucoup.
Hors ligne
#21 Le 21/03/2016, à 21:48
- MonPersoPrefereEstMortEnc
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
Mais, F50, je viens de voir dans une des analyses que j'ai lancée, qu'il était écrit:
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Gateway, Inc. Device 7201
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at 70100000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 20e0 [size=8]
Memory at 60000000 (32-bit, prefetchable) [size=256M]
Memory at 70180000 (32-bit, non-prefetchable) [size=256K]Donc, on dirait que même si j'ai un processeur 64 bit, que mon contrôleur graphique a 32 bit lui. Est-ce je peux faire quelque chose avec ça?
Hors ligne
#22 Le 21/03/2016, à 21:59
- Compte supprimé
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
C'est cette machine ? Elle a été vendue au Canada.
http://panam.gateway.com/emachines/emac … 82mv.shtml
Si oui, voir ce sujet résolu.
https://forum.ubuntu-fr.org/viewtopic.p … #p21461755
Dernière modification par Compte supprimé (Le 21/03/2016, à 22:05)
#23 Le 21/03/2016, à 22:06
- F50
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
Ça semble vraiment être du 32 bit... Si c'est avéré, la seule chose à faire est d'installer l'os en 32 bit, y'a pas de miracle.
#24 Le 22/03/2016, à 01:17
- MonPersoPrefereEstMortEnc
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
F50 a écrit :
Ça semble vraiment être du 32 bit... Si c'est avéré, la seule chose à faire est d'installer l'os en 32 bit, y'a pas de miracle.
J'ai un grave problème si c'est ça. Parce que la grande raison qui m'a fait installer Linux, c'est que mon cours sur Citrix ne supportera plus mon Win Vista à partir du 1er avril. Je ne pourrai donc plus suivre mes cours à partir de mon ordi Windows. Ils me suggéraient d'en acheter un autre. J'ai plutôt décidé d'installer Linux. Citrix supporte Linux...MAIS seulement Chrome qui roule sur Linux. Et le site de Chrome vient d'annoncer qu'il ne supportait plus le 32 bit. D'où l'obligation du 64 bit... d'où mon installation du Ubuntu 64 bit puis du Xubuntu 64 bit. Car Chrome m'est essentiel.
Mais bon, lit ma réponse suivante, je crois qu'il y a de l'espoir.
Hors ligne
#25 Le 22/03/2016, à 01:22
- MonPersoPrefereEstMortEnc
Re : [Résolu]L'écran devient illisible tout plein de rayures Xfce
Tamarou a écrit :
C'est cette machine ? Elle a été vendue au Canada.
http://panam.gateway.com/emachines/emac … 82mv.shtmlSi oui, voir ce sujet résolu.
https://forum.ubuntu-fr.org/viewtopic.p … #p21461755
Oui c'est bien ma machine. J'ai fait toutes les installations requises.
Aussi, lors de mon dernier boot, il y a eu une mises-à-jour automatique sur mon ordi.
Je suis présentement dessus depuis plus d'une heure et l'écran est demeurer stable. Il y a eu cependant quelques temps où tout devenait figé... mais si ce n'est que ça, je peux vivre avec. Et peut-être qu'au prochain reboot ce sera encore mieux.
Je laisse encore le poste ouvert car je ne peux pas dire avec cette heure sans problème que tout est ok. Je vais lui laisser encore un peu de temps et je reviens vous donner des nouvelles.
Hors ligne