#1 Le 13/04/2016, à 19:17
- phil01150
Allumage ordinateur très très long
Bonjour,
Je démarre avec Ubuntu 14.04 lts Unity, je l'ai installé avec une session Windows vista il y a environ 1 mois.
Configue:
Processeur Core 2 Duo T5800
Fréquence du processeur (GHz) 2
Quantité de mémoire vive 4096 Mo
Type de mémoire vive DDR2
Capacité de stockage principal (Go) 250
Type SSD
Partition Ubuntu 65Go
Depuis environ 2 semaines sans mauvaise manip (apparemment), l'ordinateur s'allume en environ 15 minutes, mais sans message d'erreur, et il s'éteint correctement.
je viens de faire un boot infos
http://paste.ubuntu.com/15816006/
Si quelqu'un peut me dire ce qu'il en est je lui serait très reconnaissant.
Par avance merci
Hors ligne
#2 Le 13/04/2016, à 19:29
- moko138
Re : Allumage ordinateur très très long
Donne le retour de
ls -la | grep xsession Et peux-tu faire
cd && dmesg > dmesg_$(date +%Y%m%d-%Hh%M).txtet coller ici, entre balises-code, le fichier ainsi produit dans ton /home ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#3 Le 13/04/2016, à 20:09
- willcoyote
Re : Allumage ordinateur très très long
Bonjour
Tu peux essayer bootchart
https://doc.ubuntu-fr.org/bootchart
Bootchart est un outil d'analyse du démarrage de Linux.
Hors ligne
#4 Le 20/04/2016, à 19:53
- phil01150
Re : Allumage ordinateur très très long
Bonjour,
Désolé du délai mais j'étais en déplacement....
Moko 138, voici le retour de la 1ere commande
-rw------- 1 stefetphil stefetphil 871 avril 20 19:36 .xsession-errors-rw------- 1 stefetphil stefetphil 1785 avril 18 20:34 .xsession-errors.oldet voici la seconde ne donne rien
Est ce normale?
Dernière modification par phil01150 (Le 20/04/2016, à 19:54)
Hors ligne
#5 Le 20/04/2016, à 20:50
- moko138
Re : Allumage ordinateur très très long
Le premier retour ne montre pas de taille anormale.
La seconde commande, j'ai oublié de le préciser mais si, je l'avais précisé !, redirige son retour dans un fichier
dmesg_<date>.txt dans ton home.
C'est le contenu de ce fichier qui est, en principe, révélateur.
Dernière modification par moko138 (Le 20/04/2016, à 20:52)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#6 Le 20/04/2016, à 21:09
- phil01150
Re : Allumage ordinateur très très long
Désolé moko, mais la le "rédige son retour dans un fichier"...
peut tu m'expliquer stp
Hors ligne
#7 Le 20/04/2016, à 21:36
- moko138
Re : Allumage ordinateur très très long
"redirige" pas "rédige".
Si tu demandes, disons, sudo fdisk -l, tu auras le retour dans le terminal lui-même.
Avec un inconvénient :
si le retour est très long, difficultés pour sélectionner l'ensemble,
et retour perdu quand tu fermes le terminal.
Remède : au lieu d'afficher le retour dans le terminal, envoyer le retour dans un fichier texte.
C'est ce que permet la commande >
Ça s'appelle une "redirection".
Bref, si
coller ici, entre balises-code, le fichier ainsi produit dans ton /home
n'est pas clair,
si
un fichier dmesg_<date>.txt dans ton home
n'est pas clair,
alors va voir dans ton home.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#8 Le 20/04/2016, à 21:40
- Rufus T. Firefly
Re : Allumage ordinateur très très long
Quand tu fais ceci :
commande > toto.txt1) ça crée le fichier toto.txt s'il n'existe pas déjà
2) ça exécute la commande et si elle renvoie des messages, ils n'apparaissent pas à l'écran, mais tu les retrouves dans le fichier toto.txt.
Comme c'est un fichier texte tout ce qu'il y a de plus ordinaire, tu peux l'ouvrir, copier ce qu'il y a dedans (donc les messages), le mettre sur une clef usb, etc.
Grillé ! 
Dernière modification par Rufus T. Firefly (Le 20/04/2016, à 21:41)
La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme
Hors ligne
#9 Le 25/04/2016, à 19:36
- phil01150
Re : Allumage ordinateur très très long
Bonsoir
Voici le retour récupéré dans le /home
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-58-generic (buildd@lgw01-39) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64~14.04.1-Ubuntu SMP Fri Mar 18 19:05:43 UTC 2016 (Ubuntu 3.19.0-58.64~14.04.1-generic 3.19.8-ckt16)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-58-generic root=UUID=032282a0-0564-4289-89fd-8c7bf73761dc ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf8a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf8a1000-0x00000000bf8a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf8a7000-0x00000000bf9bcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf9bd000-0x00000000bfa0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfa0f000-0x00000000bfb07fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfb08000-0x00000000bfd0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd0f000-0x00000000bfd17fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd18000-0x00000000bfd1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd1f000-0x00000000bfd64fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd65000-0x00000000bfd9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfd9f000-0x00000000bfdfffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. R610 /R610 , BIOS 02LK.MP00.20080926.SCY 09/26/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0xbfd65 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFE00000 mask FFFE00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3070MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 3070M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3070MB, range: 2MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000f7380-0x000f738f] mapped at [ffff8800000f7380]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf600000-0xbf7fffff]
[ 0.000000] [mem 0xbf600000-0xbf7fffff] page 2M
[ 0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xa0000000-0xbf5fffff]
[ 0.000000] [mem 0xa0000000-0xbf5fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x80000000-0x9fffffff]
[ 0.000000] [mem 0x80000000-0x9fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0xbf800000-0xbf8a0fff]
[ 0.000000] [mem 0xbf800000-0xbf8a0fff] page 4k
[ 0.000000] BRK [0x01fd9000, 0x01fd9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf8a7000-0xbf9bcfff]
[ 0.000000] [mem 0xbf8a7000-0xbf9bcfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfa0f000-0xbfb07fff]
[ 0.000000] [mem 0xbfa0f000-0xbfb07fff] page 4k
[ 0.000000] BRK [0x01fda000, 0x01fdafff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbfd0f000-0xbfd17fff]
[ 0.000000] [mem 0xbfd0f000-0xbfd17fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfd1f000-0xbfd64fff]
[ 0.000000] [mem 0xbfd1f000-0xbfd64fff] page 4k
[ 0.000000] RAMDISK: [mem 0x35a1c000-0x36d05fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F72E0 000024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 0x00000000BFDF8657 00006C (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFDE8000 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 0x00000000BFDE9000 006533 (v02 Intel CANTIGA 06040000 INTL 20050624)
[ 0.000000] ACPI: FACS 0x00000000BFD9EFC0 000040
[ 0.000000] ACPI: FACS 0x00000000BFD9EFC0 000040
[ 0.000000] ACPI: HPET 0x00000000BFDFED86 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 0x00000000BFDFEDBE 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 0x00000000BFDFEDFA 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BFDFEE62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 0x00000000BFDFEE8A 000176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 0x00000000BFDE7000 0005F9 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x00000000BFDE6000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x00000000BFDE5000 00020F (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bfd64fff]
[ 0.000000] NODE_DATA(0) allocated [mem 0xbfd60000-0xbfd64fff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bbe00000-ffff8800bedfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xbfd64fff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf8a0fff]
[ 0.000000] node 0: [mem 0xbf8a7000-0xbf9bcfff]
[ 0.000000] node 0: [mem 0xbfa0f000-0xbfb07fff]
[ 0.000000] node 0: [mem 0xbfd0f000-0xbfd17fff]
[ 0.000000] node 0: [mem 0xbfd1f000-0xbfd64fff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0xbfd64fff]
[ 0.000000] On node 0 totalpages: 785052
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12214 pages used for memmap
[ 0.000000] DMA32 zone: 781055 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf8a1000-0xbf8a6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf9bd000-0xbfa0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfb08000-0xbfd0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfd18000-0xbfd1efff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff8800bf400000 s86144 r8192 d32640 u1048576
[ 0.000000] pcpu-alloc: s86144 r8192 d32640 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 772753
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-58-generic root=UUID=032282a0-0564-4289-89fd-8c7bf73761dc ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3054840K/3140208K available (7950K kernel code, 1174K rwdata, 3760K rodata, 1412K init, 1292K bss, 85368K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16640 nr_irqs:440 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1995.043 MHz processor
[ 0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.08 BogoMIPS (lpj=7980172)
[ 0.004018] pid_max: default: 32768 minimum: 301
[ 0.004025] ACPI: Core revision 20141107
[ 0.010565] ACPI: All ACPI Tables successfully acquired
[ 0.010596] Security Framework initialized
[ 0.010620] AppArmor: AppArmor initialized
[ 0.010621] Yama: becoming mindful.
[ 0.011077] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013600] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014982] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.014995] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.015404] Initializing cgroup subsys memory
[ 0.015417] Initializing cgroup subsys devices
[ 0.015422] Initializing cgroup subsys freezer
[ 0.015426] Initializing cgroup subsys net_cls
[ 0.015430] Initializing cgroup subsys blkio
[ 0.015434] Initializing cgroup subsys perf_event
[ 0.015437] Initializing cgroup subsys net_prio
[ 0.015441] Initializing cgroup subsys hugetlb
[ 0.015471] CPU: Physical Processor ID: 0
[ 0.015473] CPU: Processor Core ID: 0
[ 0.015475] mce: CPU supports 6 MCE banks
[ 0.015484] CPU0: Thermal monitoring enabled (TM2)
[ 0.015489] process: using mwait in idle threads
[ 0.015496] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.015496] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.015611] Freeing SMP alternatives memory: 32K (ffffffff81e88000 - ffffffff81e90000)
[ 0.019848] ftrace: allocating 30047 entries in 118 pages
[ 0.032557] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073476] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
[ 0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.076000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.076000] ... version: 2
[ 0.076000] ... bit width: 40
[ 0.076000] ... generic registers: 2
[ 0.076000] ... value mask: 000000ffffffffff
[ 0.076000] ... max period: 000000007fffffff
[ 0.076000] ... fixed-purpose events: 3
[ 0.076000] ... event mask: 0000000700000003
[ 0.076000] x86: Booting SMP configuration:
[ 0.076000] .... node #0, CPUs: #1
[ 0.086580] x86: Booted up 1 node, 2 CPUs
[ 0.086585] smpboot: Total of 2 processors activated (7980.17 BogoMIPS)
[ 0.086632] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088059] devtmpfs: initialized
[ 0.100701] evm: security.selinux
[ 0.100704] evm: security.SMACK64
[ 0.100705] evm: security.SMACK64EXEC
[ 0.100707] evm: security.SMACK64TRANSMUTE
[ 0.100708] evm: security.SMACK64MMAP
[ 0.100710] evm: security.ima
[ 0.100711] evm: security.capability
[ 0.100732] PM: Registering ACPI NVS region [mem 0xbfd65000-0xbfd9efff] (237568 bytes)
[ 0.100732] pinctrl core: initialized pinctrl subsystem
[ 0.100732] RTC time: 18:49:04, date: 04/25/16
[ 0.100732] NET: Registered protocol family 16
[ 0.104007] cpuidle: using governor ladder
[ 0.108006] cpuidle: using governor menu
[ 0.108066] ACPI: bus type PCI registered
[ 0.108069] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.108173] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.108177] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.108686] PCI: Using configuration type 1 for base access
[ 0.116139] ACPI: Added _OSI(Module Device)
[ 0.116143] ACPI: Added _OSI(Processor Device)
[ 0.116145] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.116146] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.123484] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.124949] ACPI: Dynamic OEM Table Load:
[ 0.124959] ACPI: SSDT 0xFFFF8800BB0D2800 000265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.125502] ACPI: Dynamic OEM Table Load:
[ 0.125513] ACPI: SSDT 0xFFFF8800BB1CA000 000C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.126443] ACPI: Dynamic OEM Table Load:
[ 0.126451] ACPI: SSDT 0xFFFF8800BB19F200 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.126927] ACPI: Dynamic OEM Table Load:
[ 0.126935] ACPI: SSDT 0xFFFF8800BB0C2A80 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.128143] ACPI: Interpreter enabled
[ 0.128143] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.128143] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.128143] ACPI: (supports S0 S3 S4 S5)
[ 0.128143] ACPI: Using IOAPIC for interrupt routing
[ 0.128143] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.128586] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.133216] ACPI: Power Resource [FN00] (off)
[ 0.133216] ACPI: Power Resource [FN01] (off)
[ 0.133216] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.133216] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.133216] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.133950] PCI host bridge to bus 0000:00
[ 0.133954] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.133958] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.133960] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.133966] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.133968] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.133971] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.133973] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.133985] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.134015] DMAR: Forcing write-buffer flush capability
[ 0.134017] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.134122] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[ 0.134180] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.134228] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.134330] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.134395] pci 0000:00:1a.0: reg 0x20: [io 0x1800-0x181f]
[ 0.136054] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.136118] pci 0000:00:1a.1: reg 0x20: [io 0x1820-0x183f]
[ 0.136269] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.136333] pci 0000:00:1a.2: reg 0x20: [io 0x1840-0x185f]
[ 0.136499] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.136528] pci 0000:00:1a.7: reg 0x10: [mem 0xf6204800-0xf6204bff]
[ 0.136654] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.136773] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.136800] pci 0000:00:1b.0: reg 0x10: [mem 0xf6200000-0xf6203fff 64bit]
[ 0.136921] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.136977] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.137042] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.137170] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.137228] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.137296] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.137424] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.137486] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.137551] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.137678] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.137739] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.137809] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.137873] pci 0000:00:1d.0: reg 0x20: [io 0x1860-0x187f]
[ 0.138025] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.138089] pci 0000:00:1d.1: reg 0x20: [io 0x1880-0x189f]
[ 0.138242] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.138305] pci 0000:00:1d.2: reg 0x20: [io 0x18a0-0x18bf]
[ 0.138470] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.138499] pci 0000:00:1d.7: reg 0x10: [mem 0xf6204c00-0xf6204fff]
[ 0.138626] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.138741] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.138866] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.138932] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.139189] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.139221] pci 0000:00:1f.2: reg 0x10: [io 0x18f0-0x18f7]
[ 0.139234] pci 0000:00:1f.2: reg 0x14: [io 0x18e4-0x18e7]
[ 0.139247] pci 0000:00:1f.2: reg 0x18: [io 0x18e8-0x18ef]
[ 0.139259] pci 0000:00:1f.2: reg 0x1c: [io 0x18e0-0x18e3]
[ 0.139272] pci 0000:00:1f.2: reg 0x20: [io 0x18c0-0x18df]
[ 0.139285] pci 0000:00:1f.2: reg 0x24: [mem 0xf6204000-0xf62047ff]
[ 0.139366] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.139476] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.139501] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
[ 0.139534] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.139748] pci 0000:01:00.0: [10de:06e8] type 00 class 0x030000
[ 0.139773] pci 0000:01:00.0: reg 0x10: [mem 0xce000000-0xceffffff]
[ 0.139794] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.139816] pci 0000:01:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit]
[ 0.139830] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
[ 0.139844] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.148025] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.148029] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.148033] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.148038] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.148171] pci 0000:02:00.0: [168c:001c] type 00 class 0x020000
[ 0.148209] pci 0000:02:00.0: reg 0x10: [mem 0xf3000000-0xf300ffff 64bit]
[ 0.148396] pci 0000:02:00.0: PME# supported from D3hot
[ 0.148440] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.148497] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.148510] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.148516] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.148522] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf3ffffff]
[ 0.148530] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
[ 0.148646] acpiphp: Slot [1] registered
[ 0.148654] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.148659] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.148665] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf4ffffff]
[ 0.148673] pci 0000:00:1c.2: bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
[ 0.148963] pci 0000:06:00.0: [11ab:4363] type 00 class 0x020000
[ 0.149171] pci 0000:06:00.0: reg 0x10: [mem 0xf5000000-0xf5003fff 64bit]
[ 0.149270] pci 0000:06:00.0: reg 0x18: [io 0x5000-0x50ff]
[ 0.149633] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.150240] pci 0000:06:00.0: supports D1 D2
[ 0.150243] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.150353] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.150524] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[ 0.150529] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.150535] pci 0000:00:1c.3: bridge window [mem 0xf5000000-0xf5ffffff]
[ 0.150543] pci 0000:00:1c.3: bridge window [mem 0xf2000000-0xf2ffffff 64bit pref]
[ 0.150656] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
[ 0.150671] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.150674] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.150677] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.150679] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.150682] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.150684] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.148356] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 0.148419] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.148479] ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
[ 0.148538] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[ 0.148597] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
[ 0.148657] ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
[ 0.148715] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[ 0.148773] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[ 0.152257] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 0.152314] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.152323] ACPI : EC: 0 stale EC events cleared
[ 0.152323] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.152323] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.152323] vgaarb: loaded
[ 0.152323] vgaarb: bridge control possible 0000:01:00.0
[ 0.152365] SCSI subsystem initialized
[ 0.152428] libata version 3.00 loaded.
[ 0.152466] ACPI: bus type USB registered
[ 0.152494] usbcore: registered new interface driver usbfs
[ 0.152508] usbcore: registered new interface driver hub
[ 0.152525] usbcore: registered new device driver usb
[ 0.152597] PCI: Using ACPI for IRQ routing
[ 0.164862] PCI: pci_cache_line_size set to 64 bytes
[ 0.164992] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff]
[ 0.164994] e820: reserve RAM buffer [mem 0xbf8a1000-0xbfffffff]
[ 0.164997] e820: reserve RAM buffer [mem 0xbf9bd000-0xbfffffff]
[ 0.164999] e820: reserve RAM buffer [mem 0xbfb08000-0xbfffffff]
[ 0.165001] e820: reserve RAM buffer [mem 0xbfd18000-0xbfffffff]
[ 0.165003] e820: reserve RAM buffer [mem 0xbfd65000-0xbfffffff]
[ 0.165172] NetLabel: Initializing
[ 0.165174] NetLabel: domain hash size = 128
[ 0.165175] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.165195] NetLabel: unlabeled traffic allowed by default
[ 0.165226] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.165226] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.165226] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.166084] Switched to clocksource hpet
[ 0.174179] AppArmor: AppArmor Filesystem Enabled
[ 0.174297] pnp: PnP ACPI init
[ 0.174723] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.174729] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.174766] pnp 00:01: disabling [io 0x5000-0x500f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x5000-0x5fff]
[ 0.174783] pnp 00:01: disabling [io 0x5000-0x500f disabled] because it overlaps 0000:06:00.0 BAR 2 [io 0x5000-0x50ff]
[ 0.174818] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.174821] system 00:01: [io 0x0480-0x048f] has been reserved
[ 0.174824] system 00:01: [io 0xffff] has been reserved
[ 0.174827] system 00:01: [io 0xffff] has been reserved
[ 0.174830] system 00:01: [io 0x0400-0x047f] could not be reserved
[ 0.174833] system 00:01: [io 0x0480-0x048f] has been reserved
[ 0.174836] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.174838] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.174841] system 00:01: [io 0xfe00] has been reserved
[ 0.174845] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174916] system 00:02: [io 0x06a0-0x06af] has been reserved
[ 0.174919] system 00:02: [io 0x06b0-0x06ff] has been reserved
[ 0.174923] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174975] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.175018] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.175060] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.175243] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.175247] system 00:06: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.175249] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.175252] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.175255] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.175258] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.175261] system 00:06: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.175263] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.175267] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.175580] pnp: PnP ACPI: found 7 devices
[ 0.183257] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff 64bit]
[ 0.183273] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
[ 0.183276] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
[ 0.183280] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.183283] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.183288] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.183292] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.183298] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.183302] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.183309] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf3ffffff]
[ 0.183315] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
[ 0.183323] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.183327] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.183334] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf4ffffff]
[ 0.183339] pci 0000:00:1c.2: bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
[ 0.183349] pci 0000:06:00.0: BAR 6: assigned [mem 0xf5020000-0xf503ffff pref]
[ 0.183352] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[ 0.183356] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.183363] pci 0000:00:1c.3: bridge window [mem 0xf5000000-0xf5ffffff]
[ 0.183368] pci 0000:00:1c.3: bridge window [mem 0xf2000000-0xf2ffffff 64bit pref]
[ 0.183377] pci 0000:00:1e.0: PCI bridge to [bus 08]
[ 0.183393] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.183396] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.183399] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.183401] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.183404] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.183406] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.183409] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.183412] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[ 0.183414] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.183417] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.183420] pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf3ffffff]
[ 0.183422] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref]
[ 0.183425] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.183427] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf4ffffff]
[ 0.183430] pci_bus 0000:04: resource 2 [mem 0xf1000000-0xf1ffffff 64bit pref]
[ 0.183433] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 0.183435] pci_bus 0000:06: resource 1 [mem 0xf5000000-0xf5ffffff]
[ 0.183438] pci_bus 0000:06: resource 2 [mem 0xf2000000-0xf2ffffff 64bit pref]
[ 0.183440] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 0.183443] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 0.183446] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.183448] pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.183451] pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.183453] pci_bus 0000:08: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.183492] NET: Registered protocol family 2
[ 0.183743] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.183902] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.184113] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.184166] TCP: reno registered
[ 0.184177] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.184211] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.184289] NET: Registered protocol family 1
[ 0.185683] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.185717] PCI: CLS 64 bytes, default 64
[ 0.185798] Trying to unpack rootfs image as initramfs...
[ 0.608547] Freeing initrd memory: 19368K (ffff880035a1c000 - ffff880036d06000)
[ 0.608651] Simple Boot Flag at 0x37 set to 0x1
[ 0.608858] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
[ 0.608868] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
[ 0.608970] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.609012] Scanning for low memory corruption every 60 seconds
[ 0.609404] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.609431] Initialise system trusted keyring
[ 0.609458] audit: initializing netlink subsys (disabled)
[ 0.609486] audit: type=2000 audit(1461610144.608:1): initialized
[ 0.609949] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.612613] zpool: loaded
[ 0.612617] zbud: loaded
[ 0.612818] VFS: Disk quotas dquot_6.5.2
[ 0.612874] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.613656] fuse init (API version 7.23)
[ 0.613867] Key type big_key registered
[ 0.614324] Key type asymmetric registered
[ 0.614329] Asymmetric key parser 'x509' registered
[ 0.614386] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.614427] io scheduler noop registered
[ 0.614431] io scheduler deadline registered (default)
[ 0.614481] io scheduler cfq registered
[ 0.615392] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.615416] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.615472] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.615474] vesafb: scrolling: redraw
[ 0.615476] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.616520] vesafb: framebuffer at 0xcd000000, mapped to 0xffffc90010780000, using 1216k, total 1216k
[ 0.616665] Console: switching to colour frame buffer device 80x30
[ 0.616679] fb0: VESA VGA frame buffer device
[ 0.616717] intel_idle: does not run on family 6 model 15
[ 0.617167] ACPI: AC Adapter [ADP1] (on-line)
[ 0.617297] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.617412] ACPI: Lid Switch [LID0]
[ 0.617479] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.617484] ACPI: Power Button [PWRB]
[ 0.617585] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.617588] ACPI: Sleep Button [SLPB]
[ 0.617648] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.617651] ACPI: Power Button [PWRF]
[ 0.619242] Monitor-Mwait will be used to enter C-1 state
[ 0.619249] Monitor-Mwait will be used to enter C-2 state
[ 0.619253] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.619258] ACPI: acpi_idle registered with cpuidle
[ 0.620653] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.620656] ACPI: Thermal Zone [TZ00] (53 C)
[ 0.621378] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.621382] ACPI: Thermal Zone [TZ01] (53 C)
[ 0.621455] GHES: HEST is not enabled!
[ 0.621699] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.625542] ACPI: Battery Slot [BAT1] (battery present)
[ 0.625546] Linux agpgart interface v0.103
[ 0.627794] brd: module loaded
[ 0.628914] loop: module loaded
[ 0.629214] libphy: Fixed MDIO Bus: probed
[ 0.629218] tun: Universal TUN/TAP device driver, 1.6
[ 0.629220] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.629287] PPP generic driver version 2.4.2
[ 0.629398] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.629405] ehci-pci: EHCI PCI platform driver
[ 0.629549] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.629557] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.629575] ehci-pci 0000:00:1a.7: debug port 1
[ 0.633493] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.633516] ehci-pci 0000:00:1a.7: irq 19, io mem 0xf6204800
[ 0.644044] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.644147] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.644153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.644157] usb usb1: Product: EHCI Host Controller
[ 0.644161] usb usb1: Manufacturer: Linux 3.19.0-58-generic ehci_hcd
[ 0.644165] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.644339] hub 1-0:1.0: USB hub found
[ 0.644349] hub 1-0:1.0: 6 ports detected
[ 0.644673] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.644681] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.644696] ehci-pci 0000:00:1d.7: debug port 1
[ 0.648600] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.648619] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf6204c00
[ 0.660043] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.660117] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.660122] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.660127] usb usb2: Product: EHCI Host Controller
[ 0.660131] usb usb2: Manufacturer: Linux 3.19.0-58-generic ehci_hcd
[ 0.660135] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.660310] hub 2-0:1.0: USB hub found
[ 0.660319] hub 2-0:1.0: 6 ports detected
[ 0.660534] ehci-platform: EHCI generic platform driver
[ 0.660550] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.660556] ohci-pci: OHCI PCI platform driver
[ 0.660573] ohci-platform: OHCI generic platform driver
[ 0.660586] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.660692] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.660699] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.660708] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.660744] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.660801] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.660805] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.660807] usb usb3: Product: UHCI Host Controller
[ 0.660810] usb usb3: Manufacturer: Linux 3.19.0-58-generic uhci_hcd
[ 0.660812] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.660968] hub 3-0:1.0: USB hub found
[ 0.660977] hub 3-0:1.0: 2 ports detected
[ 0.661196] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.661203] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.661212] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.661245] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.661305] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.661308] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.661311] usb usb4: Product: UHCI Host Controller
[ 0.661313] usb usb4: Manufacturer: Linux 3.19.0-58-generic uhci_hcd
[ 0.661316] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.661465] hub 4-0:1.0: USB hub found
[ 0.661474] hub 4-0:1.0: 2 ports detected
[ 0.661679] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.661686] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.661695] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.661719] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[ 0.661777] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.661780] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.661783] usb usb5: Product: UHCI Host Controller
[ 0.661785] usb usb5: Manufacturer: Linux 3.19.0-58-generic uhci_hcd
[ 0.661788] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.661942] hub 5-0:1.0: USB hub found
[ 0.661950] hub 5-0:1.0: 2 ports detected
[ 0.662161] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.662168] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.662177] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.662201] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 0.662257] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.662260] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.662263] usb usb6: Product: UHCI Host Controller
[ 0.662266] usb usb6: Manufacturer: Linux 3.19.0-58-generic uhci_hcd
[ 0.662268] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.662415] hub 6-0:1.0: USB hub found
[ 0.662423] hub 6-0:1.0: 2 ports detected
[ 0.662630] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.662637] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.662649] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.662672] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 0.662727] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.662731] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.662733] usb usb7: Product: UHCI Host Controller
[ 0.662736] usb usb7: Manufacturer: Linux 3.19.0-58-generic uhci_hcd
[ 0.662738] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.662883] hub 7-0:1.0: USB hub found
[ 0.662892] hub 7-0:1.0: 2 ports detected
[ 0.663099] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.663108] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.663118] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.663154] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.663213] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.663216] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.663218] usb usb8: Product: UHCI Host Controller
[ 0.663221] usb usb8: Manufacturer: Linux 3.19.0-58-generic uhci_hcd
[ 0.663223] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.663374] hub 8-0:1.0: USB hub found
[ 0.663382] hub 8-0:1.0: 2 ports detected
[ 0.663566] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.666001] i8042: Detected active multiplexing controller, rev 1.1
[ 0.667128] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.667134] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.667175] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.667210] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.667248] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.667449] mousedev: PS/2 mouse device common for all mice
[ 0.667955] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.667990] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.668010] i2c /dev entries driver
[ 0.668118] device-mapper: uevent: version 1.0.3
[ 0.668227] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 0.668251] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.668465] PCCT header not found.
[ 0.668594] TCP: cubic registered
[ 0.668765] NET: Registered protocol family 10
[ 0.669064] NET: Registered protocol family 17
[ 0.669079] Key type dns_resolver registered
[ 0.669511] Loading compiled-in X.509 certificates
[ 0.670851] Loaded X.509 cert 'Magrathea: Glacier signing key: deb3430a26e67d3d3b54b9dd1325b33a46b2f2dd'
[ 0.670871] registered taskstats version 1
[ 0.673434] Key type trusted registered
[ 0.677825] Key type encrypted registered
[ 0.677833] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.677838] ima: No TPM chip found, activating TPM-bypass!
[ 0.677868] evm: HMAC attrs: 0x1
[ 0.678495] Magic number: 12:563:848
[ 0.678636] rtc_cmos 00:03: setting system clock to 2016-04-25 18:49:05 UTC (1461610145)
[ 0.679226] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.679229] EDD information not available.
[ 0.679364] PM: Hibernation image not present or could not be loaded.
[ 0.679985] Freeing unused kernel memory: 1412K (ffffffff81d27000 - ffffffff81e88000)
[ 0.679988] Write protecting the kernel read-only data: 12288k
[ 0.680332] Freeing unused kernel memory: 228K (ffff8800017c7000 - ffff880001800000)
[ 0.680546] Freeing unused kernel memory: 336K (ffff880001bac000 - ffff880001c00000)
[ 0.692476] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.696096] systemd-udevd[104]: starting version 204
[ 0.752102] sky2: driver version 1.30
[ 0.752363] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 0.753375] sky2 0000:06:00.0 eth0: addr 00:13:77:d3:19:e7
[ 0.761993] ahci 0000:00:1f.2: version 3.0
[ 0.762221] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.762262] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.762266] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 0.788736] scsi host0: ahci
[ 0.788917] scsi host1: ahci
[ 0.792200] scsi host2: ahci
[ 0.795938] scsi host3: ahci
[ 0.798075] scsi host4: ahci
[ 0.798237] scsi host5: ahci
[ 0.798324] ata1: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204100 irq 29
[ 0.798328] ata2: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204180 irq 29
[ 0.798330] ata3: DUMMY
[ 0.798332] ata4: DUMMY
[ 0.798335] ata5: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204300 irq 29
[ 0.798339] ata6: SATA max UDMA/133 abar m2048@0xf6204000 port 0xf6204380 irq 29
[ 0.956121] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.116039] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.117658] ata1.00: supports DRM functions and may not be fully accessible
[ 1.117831] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.117836] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
[ 1.117841] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.118433] ata1.00: supports DRM functions and may not be fully accessible
[ 1.118547] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.118675] ata1.00: configured for UDMA/133
[ 1.118841] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 1.119173] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.119175] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.119320] sd 0:0:0:0: [sda] Write Protect is off
[ 1.119324] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.119376] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.119975] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.120718] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.180460] usb 1-3: New USB device found, idVendor=0ac8, idProduct=c302
[ 1.180466] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.180471] usb 1-3: Product: Vega USB 2.0 Camera.
[ 1.180476] usb 1-3: Manufacturer: Vimicro Corp.
[ 1.436053] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.436535] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, SC05, max UDMA/100
[ 1.436542] ata2.00: applying bridge limits
[ 1.437535] ata2.00: configured for UDMA/100
[ 1.440678] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A SC05 PQ: 0 ANSI: 5
[ 1.463932] sr 1:0:0:0: [sr0] scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.463935] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.464114] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.464199] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.552563] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0, board id: 0, fw id: 437321
[ 1.589245] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[ 1.784048] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.104045] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.170448] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 2.294678] random: init urandom read with 37 bits of entropy available
[ 2.331212] init: plymouth-upstart-bridge main process (178) terminated with status 1
[ 2.331230] init: plymouth-upstart-bridge main process ended, respawning
[ 2.341441] init: plymouth-upstart-bridge main process (188) terminated with status 1
[ 2.341458] init: plymouth-upstart-bridge main process ended, respawning
[ 2.351141] init: plymouth-upstart-bridge main process (191) terminated with status 1
[ 2.351166] init: plymouth-upstart-bridge main process ended, respawning
[ 2.502834] Adding 3139580k swap on /dev/sda5. Priority:-1 extents:1 across:3139580k SSFS
[ 2.701057] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 2.727023] systemd-udevd[321]: starting version 204
[ 2.825266] lp: driver loaded but no devices found
[ 2.837774] ppdev: user-space parallel port driver
[ 3.006896] random: nonblocking pool is initialized
[ 3.215474] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.472883] audit: type=1400 audit(1461602948.290:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=482 comm="apparmor_parser"
[ 3.472893] audit: type=1400 audit(1461602948.290:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=482 comm="apparmor_parser"
[ 3.473445] audit: type=1400 audit(1461602948.290:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=482 comm="apparmor_parser"
[ 3.496077] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258)
[ 3.496088] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.496093] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\GPIO) (20141107/utaddress-258)
[ 3.496098] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.496100] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\GPIO) (20141107/utaddress-258)
[ 3.496104] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.496106] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.496290] Bluetooth: Core ver 2.20
[ 3.496341] NET: Registered protocol family 31
[ 3.496344] Bluetooth: HCI device and connection manager initialized
[ 3.496572] Bluetooth: HCI socket layer initialized
[ 3.496578] Bluetooth: L2CAP socket layer initialized
[ 3.496587] Bluetooth: SCO socket layer initialized
[ 3.521997] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.522002] Bluetooth: BNEP filters: protocol multicast
[ 3.522009] Bluetooth: BNEP socket layer initialized
[ 3.542152] Bluetooth: RFCOMM TTY layer initialized
[ 3.542166] Bluetooth: RFCOMM socket layer initialized
[ 3.542173] Bluetooth: RFCOMM ver 1.11
[ 3.614428] [drm] Initialized drm 1.1.0 20060810
[ 3.618961] cfg80211: Calling CRDA to update world regulatory domain
[ 3.637057] audit: type=1400 audit(1461602948.454:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=512 comm="apparmor_parser"
[ 3.637068] audit: type=1400 audit(1461602948.454:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=512 comm="apparmor_parser"
[ 3.637074] audit: type=1400 audit(1461602948.454:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=512 comm="apparmor_parser"
[ 3.637625] audit: type=1400 audit(1461602948.454:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=512 comm="apparmor_parser"
[ 3.637632] audit: type=1400 audit(1461602948.454:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=512 comm="apparmor_parser"
[ 3.637924] audit: type=1400 audit(1461602948.454:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=512 comm="apparmor_parser"
[ 3.662897] ACPI: Video Device [NVID] (multi-head: yes rom: no post: no)
[ 3.662977] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 3.668389] acpi device:02: registered as cooling_device4
[ 3.670459] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input13
[ 3.688681] media: Linux media interface: v0.10
[ 3.693967] wmi: Mapper loaded
[ 3.698194] Linux video capture interface: v2.00
[ 3.726105] uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302)
[ 3.751244] input: Vega USB 2.0 Camera. as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input14
[ 3.751345] usbcore: registered new interface driver uvcvideo
[ 3.751347] USB Video Class driver (1.1.1)
[ 3.776946] checking generic (cd000000 130000) vs hw (d0000000 10000000)
[ 3.776951] checking generic (cd000000 130000) vs hw (cc000000 2000000)
[ 3.776953] fb: switching to nouveaufb from VESA VGA
[ 3.777000] Console: switching to colour dummy device 80x25
[ 3.782214] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x298400a2
[ 3.782220] nouveau [ DEVICE][0000:01:00.0] Chipset: G98 (NV98)
[ 3.782223] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 3.812056] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 3.812200] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 3.812204] nouveau [ VBIOS][0000:01:00.0] version 62.98.3c.00.00
[ 3.812641] ath5k 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.812781] ath5k 0000:02:00.0: registered as 'phy0'
[ 3.836905] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 3.837168] nouveau W[ VBIOS][0000:01:00.0] M0203T not found
[ 3.837172] nouveau W[ VBIOS][0000:01:00.0] M0203E not matched!
[ 3.837195] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 3.837198] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 3.837200] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 3.839638] nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 3.883693] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 3.883726] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 3.883735] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 3.904510] nouveau [ CLK][0000:01:00.0] 03: core 169 MHz shader 338 MHz memory 100 MHz
[ 3.904531] nouveau [ CLK][0000:01:00.0] 05: core 275 MHz shader 550 MHz memory 250 MHz
[ 3.904535] nouveau [ CLK][0000:01:00.0] 07: core 500 MHz shader 1000 MHz memory 410 MHz
[ 3.904540] nouveau [ CLK][0000:01:00.0] 0f: core 529 MHz shader 1300 MHz memory 410 MHz
[ 3.904649] nouveau [ CLK][0000:01:00.0] --: core 275 MHz shader 550 MHz memory 249 MHz
[ 3.905569] [TTM] Zone kernel: Available graphics memory: 1538108 kiB
[ 3.905573] [TTM] Initializing pool allocator
[ 3.905592] [TTM] Initializing DMA pool allocator
[ 3.905624] nouveau [ DRM] VRAM: 512 MiB
[ 3.905627] nouveau [ DRM] GART: 1048576 MiB
[ 3.905632] nouveau [ DRM] TMDS table version 2.0
[ 3.905639] nouveau [ DRM] DCB version 4.0
[ 3.905642] nouveau [ DRM] DCB outp 00: 01011323 00010034
[ 3.905645] nouveau [ DRM] DCB outp 01: 02000300 00000028
[ 3.905648] nouveau [ DRM] DCB outp 02: 04022332 00020010
[ 3.905650] nouveau [ DRM] DCB conn 00: 00000000
[ 3.905653] nouveau [ DRM] DCB conn 01: 00000140
[ 3.905655] nouveau [ DRM] DCB conn 02: 00001261
[ 3.926775] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.926780] [drm] Driver supports precise vblank timestamp query.
[ 3.956313] nouveau [ DRM] MM: using M2MF for buffer copies
[ 4.053231] samsung_laptop: detected SABI interface: SwSmi@
[ 4.053235] samsung_laptop: Backlight controlled by ACPI video driver
[ 4.429068] init: failsafe main process (581) killed by TERM signal
[ 4.530346] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.530352] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.530355] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 4.530358] sound hdaudioC0D0: mono: mono_out=0x0
[ 4.530360] sound hdaudioC0D0: inputs:
[ 4.530364] sound hdaudioC0D0: Internal Mic=0x19
[ 4.530367] sound hdaudioC0D0: Mic=0x18
[ 4.565013] cfg80211: World regulatory domain updated:
[ 4.565018] cfg80211: DFS Master region: unset
[ 4.565020] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.565023] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.565026] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.565029] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.565032] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.565035] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.624642] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.624808] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.624980] input: HDA Intel HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 4.812617] sky2 0000:06:00.0 eth0: enabling interface
[ 4.814820] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.055359] nouveau [ DRM] allocated 1366x768 fb: 0x70000, bo ffff8800ba1b9800
[ 5.055623] fbcon: nouveaufb (fb0) is primary device
[ 5.055710] Console: switching to colour frame buffer device 170x48
[ 5.055748] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 5.055751] nouveau 0000:01:00.0: registered panic notifier
[ 5.080116] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0
[ 5.140168] ath: EEPROM regdomain: 0x65
[ 5.140173] ath: EEPROM indicates we should expect a direct regpair map
[ 5.140176] ath: Country alpha2 being used: 00
[ 5.140178] ath: Regpair used: 0x65
[ 5.217263] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.217658] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 5.244439] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.108573] wlan0: authenticate with 00:1d:6a:1c:72:bd
[ 7.119374] wlan0: send auth to 00:1d:6a:1c:72:bd (try 1/3)
[ 7.121991] wlan0: authenticated
[ 7.124129] wlan0: associate with 00:1d:6a:1c:72:bd (try 1/3)
[ 7.127478] wlan0: RX AssocResp from 00:1d:6a:1c:72:bd (capab=0x431 status=0 aid=5)
[ 7.127575] wlan0: associated
[ 7.127589] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 7.128193] cfg80211: Calling CRDA for country: FR
[ 7.131040] ath: EEPROM regdomain: 0x80fa
[ 7.131044] ath: EEPROM indicates we should expect a country code
[ 7.131046] ath: doing EEPROM country->regdmn map search
[ 7.131048] ath: country maps to regdmn code: 0x37
[ 7.131050] ath: Country alpha2 being used: FR
[ 7.131051] ath: Regpair used: 0x37
[ 7.131053] ath: regdomain 0x80fa dynamically updated by country IE
[ 7.131057] cfg80211: Regulatory domain changed to country: FR
[ 7.131059] cfg80211: DFS Master region: unset
[ 7.131060] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7.131063] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.131066] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.131069] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 7.131071] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 7.131074] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 7.156750] wlan0: deauthenticating from 00:1d:6a:1c:72:bd by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 7.272404] cfg80211: Calling CRDA to update world regulatory domain
[ 7.273152] wlan0: authenticate with 00:1d:6a:1c:72:bd
[ 7.277420] wlan0: send auth to 00:1d:6a:1c:72:bd (try 1/3)
[ 7.277592] cfg80211: World regulatory domain updated:
[ 7.277596] cfg80211: DFS Master region: unset
[ 7.277598] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7.277601] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7.277604] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7.277607] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7.277610] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7.277613] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7.279528] wlan0: authenticated
[ 7.280317] wlan0: associate with 00:1d:6a:1c:72:bd (try 1/3)
[ 7.283650] wlan0: RX AssocResp from 00:1d:6a:1c:72:bd (capab=0x431 status=0 aid=5)
[ 7.283751] wlan0: associated
[ 7.283795] cfg80211: Calling CRDA for country: FR
[ 7.286552] ath: EEPROM regdomain: 0x80fa
[ 7.286556] ath: EEPROM indicates we should expect a country code
[ 7.286558] ath: doing EEPROM country->regdmn map search
[ 7.286560] ath: country maps to regdmn code: 0x37
[ 7.286562] ath: Country alpha2 being used: FR
[ 7.286563] ath: Regpair used: 0x37
[ 7.286565] ath: regdomain 0x80fa dynamically updated by country IE
[ 7.286569] cfg80211: Regulatory domain changed to country: FR
[ 7.286571] cfg80211: DFS Master region: unset
[ 7.286573] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7.286575] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.286578] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.286581] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 7.286583] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 7.286586] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 7.374452] init: plymouth-upstart-bridge main process ended, respawning
[ 7.383326] init: plymouth-upstart-bridge main process (1132) terminated with status 1
[ 7.383346] init: plymouth-upstart-bridge main process ended, respawning
[ 220.244085] ath5k: ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000
[ 735.599184] audit_printk_skb: 153 callbacks suppressed
[ 735.599189] audit: type=1400 audit(1461603675.927:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2330 comm="apparmor_parser"
[ 735.599200] audit: type=1400 audit(1461603675.927:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2330 comm="apparmor_parser"
[ 735.599857] audit: type=1400 audit(1461603675.927:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2330 comm="apparmor_parser"
[ 1626.851811] perf interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 2258.183421] systemd-hostnamed[3468]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!Désolé mais je débute avec Ubuntu
Cordialement
Dernière modification par phil01150 (Le 25/04/2016, à 19:39)
Hors ligne
#10 Le 25/04/2016, à 21:59
- moko138
Re : Allumage ordinateur très très long
phil01150 a écrit :
Désolé mais je débute avec Ubuntu
Ah ! Mais alors, sois le bienvenu ! 
- -
Avant que je n'oublie, note quelque part
- que, comme Vista, sauf prolongation, cessera d'être maintenu en avril 2017, tu passeras peut-être à un successeur,
- et que win7 et win8 ont la détestable habitude d'écraser Linux quand il est installé comme le tien, avec une partition étendue ne commençant pas par sda5.
parted -l, extrait de ton boot-info
parted -l (extrait de ton boot-info) a écrit :
Model: ATA Samsung SSD 850 (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 4096B 10.7GB 10.7GB primary ntfs diag
2 10.7GB 84.9GB 74.1GB primary ntfs boot
3 84.9GB 180GB 95.1GB primary ntfs
4 180GB 250GB 70.0GB extended
6 180GB 247GB 66.8GB logical ext4
5 247GB 250GB 3215MB logical linux-swap(v1)
- donc qu'il faudra, avant de passer au windows suivant,
soit prendre des mesures préventives (Babdu89 ou Bougron se feront un plaisir de t'y aider),
soit te préparer à réinstaller, mais de toute façon, sauvegarder d'abord le plus précieux : tes données.
_ _ _ _
Tu as un démarrage très rapide jusqu'à
[ 7.383346] init: plymouth-upstart-bridge main process endedet là, il y a un trou de plus de 3"30"" jusqu'à la prise en charge de ta carte wifi
[ 220.244085] ath5k(Le 1er nombre, ce sont les secondes écoulées depuis le démarrage du noyau. Donc 220-7 = 3'43'').
Puis encore un trou de 8'30'' jusqu'à
[ 735.599184] audit_printk_skb: 153 callbacks suppressedqui est un bug de Trusty avec certains pc.
Puis encore un trou de 15' jusqu'à
[ 1626.851811] perf interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000qui est un autre bug de Trusty avec certains pc, dont j'ai oublié la solution, nous allons la retrouver.
Bref, tu n'as fait aucune erreur, bravo !
1600 secondes, ça nous met à 27', c'est inacceptable.
Soit nous arrivons à corriger cela rapidement, soit ça vaudra le coup de tester, d'abord en live, la Xenial (16.04). Elle n'a que 4 jours, mais c'est aussi une LTS, maintenue sur 5 ans.
Dernière modification par moko138 (Le 26/04/2016, à 07:12)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#11 Le 26/04/2016, à 19:19
- LeoMajor
Re : Allumage ordinateur très très long
bonsoir,
il y a de nombreuses causes qui peuvent expliquer un long boot
-périphériques usb, mal reconnus, ou pris pour autre chose, à débrancher ( une caméra, webcam pris pour un disque dur, matériel exotique, matériel trop récent, ...) et rebrancher progressivement un par un.
-corruption de secteurs défectueux sur eq. disques durs. -> fsck
-boot options du kernel; de l'option facultative à l'option obligatoire, il y a qu' en faisant les tests que tu le sauras. une par une ou toutes ...
egrep -i '(error|panic|not|can|mount|usb|pci|debug|disable)' /tmp/log
[ 0.000000] NX (Execute Disable) protection: active
noexec32=yesref ingérance ou pas ?!
[ 0.128143] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
pci=nocrs[Firmware Bug] ACPI No _BQC method, cannot determine initial brightness
acpi_backlight=vendoregrep -i '(ASPM)' /tmp/log
[ 0.133216] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.133216] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.148497] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 3.812641] ath5k 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
pcie_aspm=off - disables ASPM
pcie_aspm=performance - disables ASPM and clock power management
"pcie_aspm=off" has seemed to help some users with some PCIe devices that case Linux hang at boot time.--> renseigner /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash noexec32=yes pci=nocrs acpi_backlight=vendor pcie_aspm=off"sudo update-grub2
-bios/efi options
-technologie hybride (ce n'est pas ton cas d'après ton matériel)
...
Hors ligne
#12 Le 27/04/2016, à 18:06
- phil01150
Re : Allumage ordinateur très très long
Bonjour,
Donc il y bien un problème;)
Par contre vous me faites un peu peur dons les explications, "pour un novice"
Sinon en ce qui concerne des périphériques de branchés, et bien il n'y en a pas
Que dois-je faire?
Hors ligne
#13 Le 27/04/2016, à 18:41
- zephirin
Re : Allumage ordinateur très très long
Perso je sauvegarde et je réinstalle tout, d'abord Vista puis Ubuntu.
AIO tactile 27" Samsung i5 8GB DDR3 W11 - tour Antec Asus P5GCMX1333 W11
iMac 27" fin 2009 i5 750 16GBssd2TB cg512 HighSierra - MacBookAir 13" 2017 i5 8GB ssd120 Monterey - MacBookPro mi 2012 8GB DDR3 Catalina
Hors ligne
#14 Le 27/04/2016, à 18:59
- Rufus T. Firefly
Re : Allumage ordinateur très très long
[ 220.244085] ath5kÇa c'est un driver wifi... Il se peut que ce ne soit pas le bon pour ta carte (une mise à jour foireuse ?)...
Renvoie
lspci | grep -i netDernière modification par Rufus T. Firefly (Le 27/04/2016, à 19:00)
La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme
Hors ligne
#15 Le 27/04/2016, à 19:05
- moko138
Re : Allumage ordinateur très très long
Puisque le pilote de ta carte wifi semble poser un problème
[ 7.383346] init: plymouth-upstart-bridge main process ended, respawning
# TROU de 213 secondes
[ 220.244085] ath5k: ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000donne déjà les 3 retours séparés et complets, même si le 2nd semble vide, de
lsmod | grep athcat /etc/modprobe.d/blacklist.conf | grep athls -l /etc/modprobe.d/ | grep ath%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#16 Le 27/04/2016, à 19:19
- moko138
Re : Allumage ordinateur très très long
En complément de la commande de Rufus, peux-tu donner aussi
sudo lshw | grep wireless%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#17 Le 27/04/2016, à 20:37
- phil01150
Re : Allumage ordinateur très très long
zephirin a écrit :
Perso je sauvegarde et je réinstalle tout, d'abord Vista puis Ubuntu.
Je n'ai pas de cd d’installation de Vista le PC est de 2006
Rufus, voici le retour:
stefetphil@stefetphil:~$ lspci | grep -i net
02:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 13)Moko, voici le retour:
stefetphil@stefetphil:~$ lsmod | grep ath
ath5k 151552 0
ath 32768 1 ath5k
mac80211 720896 1 ath5k
cfg80211 532480 3 ath,ath5k,mac80211Effectivement la seconde commande ne donne rien
stefetphil@stefetphil:~$ ls -l /etc/modprobe.d/ | grep ath
-rw-r--r-- 1 root root 325 avril 10 2014 blacklist-ath_pci.confstefetphil@stefetphil:~$ sudo lshw | grep wireless
[sudo] password for stefetphil:
fonctionnalités: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ath5k driverversion=3.19.0-58-generic firmware=N/A ip=192.168.1.11 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgEn tout cas merci beaucoup messieurs pour le temps passé.
Hors ligne
#18 Le 28/04/2016, à 07:58
- moko138
Re : Allumage ordinateur très très long
Donne maintenant les retours complets de
cat /etc/modprobe.d/blacklist-ath_pci.confet de
cat /etc/modules-----
ps : ton retour vide aurait dû être ceci :
stefetphil@stefetphil:~$ cat /etc/modprobe.d/blacklist.conf | grep ath
stefetphil@stefetphil:~$Car un retour de commande complet comprend le retour du prompt.
S'il te plaît, retiens qu'un retour de commande complet est de la forme
moi@mon-pc:~$ commande
(...)
moi@mon-pc:~$et applique-le. Merci !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#19 Le 10/05/2016, à 18:06
- phil01150
Re : Allumage ordinateur très très long
Bonjour,
Voici les retours:
stefetphil@stefetphil:~$ cat /etc/modprobe.d/blacklist-ath_pci.conf
# For some Atheros 5K RF MACs, the madwifi driver loads buts fails to
# correctly initialize the hardware, leaving it in a state from
# which ath5k cannot recover. To prevent this condition, stop
# madwifi from loading by default. Use Jockey to select one driver
# or the other. (Ubuntu: #315056, #323830)
blacklist ath_pci
stefetphil@stefetphil:~$ stefetphil@stefetphil:~$ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# Parameters can be specified after the module name.
lp
rtc
stefetphil@stefetphil:~$ je pensais que le "prompt" était redondant
Cordialement
Hors ligne
#20 Le 12/05/2016, à 18:10
- moko138
Re : Allumage ordinateur très très long
phil01150 a écrit :
je pensais que le "prompt" était redondant
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#21 Le 12/05/2016, à 18:36
- phil01150
Re : Allumage ordinateur très très long
j'ai bien compris...
Donc sinon pour vous quel est le problème pour le démarrage?
Hors ligne
#22 Le 13/05/2016, à 17:13
- moko138
Re : Allumage ordinateur très très long
Exécute
echo ath5k | sudo tee -a /etc/modulesEt redémarre et lance, sitôt arrivé dans ta session,
cd && dmesg > dmesg_$(date +%Y%m%d-%Hh%M).txtet donne le nouveau fichier ainsi créé.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#23 Le 14/05/2016, à 12:17
- phil01150
Re : Allumage ordinateur très très long
Bonjour
stefetphil@stefetphil:~$ echo ath5k | sudo tee -a /etc/modules
[sudo] password for stefetphil:
ath5k
stefetphil@stefetphil:~$ et la seconde
stefetphil@stefetphil:~$ cd && dmesg > dmesg_$(date +%Y%m%d-%Hh%M).txt
.stefetphil@stefetphil:~$ .Dernière modification par phil01150 (Le 14/05/2016, à 12:24)
Hors ligne
#24 Le 14/05/2016, à 12:37
- moko138
Re : Allumage ordinateur très très long
moko138 a écrit :
...et donne le nouveau fichier ainsi créé.
comme tu as fait en #9.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#25 Le 14/05/2016, à 13:01
- phil01150
Re : Allumage ordinateur très très long
je ne comprend pas ce que tu me demande, désolé
Hors ligne