Pages : 1
#1 Le 14/04/2016, à 17:36
- Bougron
[FYI] Agrandissement d'une partition.
Agrandissement d'une partition.
Je ne pensais pas avoir cette surprise lorsque j'ai décidé d'agrandir une partition
GParted 0.18.0 --enable-libparted-dmraid --enable-online-resize
Libparted 2.3
Agrandir /dev/sda4 de 35.90 Gio à 70.26 Gio 00:00:00 ( ERREUR )
calibrer /dev/sda4 00:00:00 ( SUCCÈS )
chemin : /dev/sda4
début : 1772619776
fin : 1847904255
taille : 75284480 (35.90 Gio)
vérifier le système de fichiers sur /dev/sda4 et corriger les problèmes (si possible) 00:00:00 ( ERREUR )
ntfsresize -i -f -v /dev/sda4
ntfsresize v2013.1.13AR.1 (libntfs-3g)
Device name : /dev/sda4
NTFS volume version: 3.1
Cluster size : 4096 bytes
Current volume size: 38545543680 bytes (38546 MB)
Current device size: 38545653760 bytes (38546 MB)
Checking for bad sectors ...
Bad cluster: 0x60ba47 - 0x60ba47 (1)
ERROR: This software has detected that the disk has at least 1 bad sector.
****************************************************************************
* WARNING: The disk has bad sector. This means physical damage on the disk *
* surface caused by deterioration, manufacturing faults or other reason. *
* The reliability of the disk may stay stable or degrade fast. We suggest *
* making a full backup urgently by running 'ntfsclone --rescue ...' then *
* run 'chkdsk /f /r' on Windows and rebooot it TWICE! Then you can resize *
* NTFS safely by additionally using the --bad-sectors option of ntfsresize.*
****************************************************************************
========================================
car le disque me semble en bon état
u14044@u14044:~$ sudo smartctl -d sat -s on -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.2.0-34-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MQ01UBD100
Serial Number: Z39DTAA3T
LU WWN Device Id: 0 000000 000000000
Firmware Version: AX001U
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Apr 14 17:10:55 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 236) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 2590
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2521
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 1205
10 Spin_Retry_Count 0x0033 149 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 608
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 2
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 173
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 11363
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 40 (Min/Max 14/47)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
222 Loaded_Hours 0x0032 100 100 000 Old_age Always - 181
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 260
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Hors ligne
#2 Le 14/04/2016, à 17:59
- moko138
Re : [FYI] Agrandissement d'une partition.
Avais-tu omis de lui faire d'abord un chkdsk et une défragmentation ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#3 Le 14/04/2016, à 18:19
- Bougron
Re : [FYI] Agrandissement d'une partition.
Bonjour moko138.
Oui j'avais omis de ne pas faire chaque semaine ce contrôle.
Comme j'ai fais depuis un boot et rebranché le disque après, Il est maintenant SDB.
J'ai fait une capture d'écran http://hpics.li/67a244d On voit bien qu'actuellement il semble correct. Je me prépare à lancer windows
Maintenant je vais le démonter et contrairement au premier démontage, il va 'alerter" et rendre impossible un changement de taille. http://hpics.li/c97b883
Dernière modification par Bougron (Le 14/04/2016, à 18:20)
Hors ligne
#4 Le 14/04/2016, à 18:34
- moko138
Re : [FYI] Agrandissement d'une partition.
j'avais omis de ne pas faire chaque semaine ce contrôle.
Pas compris.
Avais-tu fait préalablement chkdsk et défragmentation?
- -
Sur tes captures, on ne voit pas d'espace non alloué contigu.
Donc je ne comprends pas comment tu as pu demander un agrandissement de 36 à 70G.
- -
Que venait faire l'option --enable-libparted-dmraid ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#5 Le 14/04/2016, à 23:29
- Bougron
Re : [FYI] Agrandissement d'une partition.
j'avais omis de ne pas faire chaque semaine ce contrôle.
Pas compris.
Avais-tu fait préalablement chkdsk et défragmentation?
- -
Il y a bien longtemps que je n'avais pas fait de chkdsk et encore plus longtemps que je n'avais pas fait de defragm. (Cette partition contient un windows XP de secours).
====> Le message d'erreur du chkdsk : CHKDSK a découvert de l'espace libre marqué alloué dans la bitmap du volume.
Donc voici le résultat après la seconde correction.
Le type du systŠme de fichiers est NTFS.
Le nom de volume est WINXPsda2.
CHKDSK est en train de v‚rifier les fichiers (‚tape 1 de 3)...
0 pour cent termin‚.
1 pour cent termin‚.
2 pour cent termin‚.
3 pour cent termin‚.
4 pour cent termin‚.
5 pour cent termin‚.
6 pour cent termin‚.
7 pour cent termin‚.
8 pour cent termin‚.
9 pour cent termin‚.
10 pour cent termin‚.
11 pour cent termin‚.
12 pour cent termin‚.
13 pour cent termin‚.
14 pour cent termin‚.
15 pour cent termin‚.
16 pour cent termin‚.
17 pour cent termin‚.
18 pour cent termin‚.
19 pour cent termin‚.
20 pour cent termin‚.
21 pour cent termin‚.
22 pour cent termin‚.
23 pour cent termin‚.
24 pour cent termin‚.
25 pour cent termin‚.
26 pour cent termin‚.
27 pour cent termin‚.
28 pour cent termin‚.
29 pour cent termin‚.
30 pour cent termin‚.
31 pour cent termin‚.
32 pour cent termin‚.
33 pour cent termin‚.
34 pour cent termin‚.
35 pour cent termin‚.
36 pour cent termin‚.
37 pour cent termin‚.
38 pour cent termin‚.
39 pour cent termin‚.
40 pour cent termin‚.
41 pour cent termin‚.
42 pour cent termin‚.
43 pour cent termin‚.
44 pour cent termin‚.
45 pour cent termin‚.
46 pour cent termin‚.
47 pour cent termin‚.
48 pour cent termin‚.
49 pour cent termin‚.
50 pour cent termin‚.
51 pour cent termin‚.
52 pour cent termin‚.
53 pour cent termin‚.
54 pour cent termin‚.
55 pour cent termin‚.
56 pour cent termin‚.
57 pour cent termin‚.
58 pour cent termin‚.
59 pour cent termin‚.
60 pour cent termin‚.
61 pour cent termin‚.
62 pour cent termin‚.
63 pour cent termin‚.
64 pour cent termin‚.
65 pour cent termin‚.
66 pour cent termin‚.
67 pour cent termin‚.
68 pour cent termin‚.
69 pour cent termin‚.
70 pour cent termin‚.
71 pour cent termin‚.
72 pour cent termin‚.
73 pour cent termin‚.
74 pour cent termin‚.
75 pour cent termin‚.
76 pour cent termin‚.
77 pour cent termin‚.
78 pour cent termin‚.
79 pour cent termin‚.
80 pour cent termin‚.
81 pour cent termin‚.
82 pour cent termin‚.
83 pour cent termin‚.
84 pour cent termin‚.
85 pour cent termin‚.
86 pour cent termin‚.
87 pour cent termin‚.
88 pour cent termin‚.
89 pour cent termin‚.
90 pour cent termin‚.
91 pour cent termin‚.
92 pour cent termin‚.
93 pour cent termin‚.
94 pour cent termin‚.
95 pour cent termin‚.
96 pour cent termin‚.
97 pour cent termin‚.
98 pour cent termin‚.
99 pour cent termin‚.
100 pour cent termin‚.
La v‚rification des fichiers est termin‚e.
CHKDSK est en train de v‚rifier les index (‚tape 2 de 3)...
0 pour cent termin‚.
1 pour cent termin‚.
2 pour cent termin‚.
3 pour cent termin‚.
4 pour cent termin‚.
5 pour cent termin‚.
6 pour cent termin‚.
7 pour cent termin‚.
8 pour cent termin‚.
9 pour cent termin‚.
10 pour cent termin‚.
11 pour cent termin‚.
12 pour cent termin‚.
13 pour cent termin‚.
14 pour cent termin‚.
15 pour cent termin‚.
16 pour cent termin‚.
17 pour cent termin‚.
18 pour cent termin‚.
19 pour cent termin‚.
20 pour cent termin‚.
21 pour cent termin‚.
22 pour cent termin‚.
23 pour cent termin‚.
24 pour cent termin‚.
25 pour cent termin‚.
26 pour cent termin‚.
27 pour cent termin‚.
28 pour cent termin‚.
29 pour cent termin‚.
30 pour cent termin‚.
31 pour cent termin‚.
32 pour cent termin‚.
33 pour cent termin‚.
34 pour cent termin‚.
35 pour cent termin‚.
36 pour cent termin‚.
37 pour cent termin‚.
38 pour cent termin‚.
39 pour cent termin‚.
40 pour cent termin‚.
41 pour cent termin‚.
42 pour cent termin‚.
43 pour cent termin‚.
44 pour cent termin‚.
45 pour cent termin‚.
46 pour cent termin‚.
47 pour cent termin‚.
48 pour cent termin‚.
49 pour cent termin‚.
50 pour cent termin‚.
51 pour cent termin‚.
52 pour cent termin‚.
53 pour cent termin‚.
54 pour cent termin‚.
55 pour cent termin‚.
56 pour cent termin‚.
57 pour cent termin‚.
58 pour cent termin‚.
59 pour cent termin‚.
60 pour cent termin‚.
61 pour cent termin‚.
62 pour cent termin‚.
63 pour cent termin‚.
64 pour cent termin‚.
65 pour cent termin‚.
66 pour cent termin‚.
67 pour cent termin‚.
68 pour cent termin‚.
69 pour cent termin‚.
70 pour cent termin‚.
71 pour cent termin‚.
72 pour cent termin‚.
73 pour cent termin‚.
74 pour cent termin‚.
75 pour cent termin‚.
76 pour cent termin‚.
77 pour cent termin‚.
78 pour cent termin‚.
79 pour cent termin‚.
80 pour cent termin‚.
81 pour cent termin‚.
82 pour cent termin‚.
83 pour cent termin‚.
84 pour cent termin‚.
85 pour cent termin‚.
86 pour cent termin‚.
87 pour cent termin‚.
88 pour cent termin‚.
89 pour cent termin‚.
90 pour cent termin‚.
91 pour cent termin‚.
92 pour cent termin‚.
93 pour cent termin‚.
94 pour cent termin‚.
95 pour cent termin‚.
96 pour cent termin‚.
97 pour cent termin‚.
98 pour cent termin‚.
99 pour cent termin‚.
100 pour cent termin‚.
La v‚rification des index est termin‚e.
CHKDSK est en train de v‚rifier les descripteurs de s‚curit‚ (‚tape 3 de 3)...
0 pour cent termin‚.
1 pour cent termin‚.
2 pour cent termin‚.
3 pour cent termin‚.
4 pour cent termin‚.
5 pour cent termin‚.
6 pour cent termin‚.
7 pour cent termin‚.
8 pour cent termin‚.
9 pour cent termin‚.
10 pour cent termin‚.
11 pour cent termin‚.
12 pour cent termin‚.
13 pour cent termin‚.
14 pour cent termin‚.
15 pour cent termin‚.
16 pour cent termin‚.
17 pour cent termin‚.
18 pour cent termin‚.
19 pour cent termin‚.
20 pour cent termin‚.
21 pour cent termin‚.
22 pour cent termin‚.
23 pour cent termin‚.
24 pour cent termin‚.
25 pour cent termin‚.
26 pour cent termin‚.
27 pour cent termin‚.
28 pour cent termin‚.
29 pour cent termin‚.
30 pour cent termin‚.
31 pour cent termin‚.
32 pour cent termin‚.
33 pour cent termin‚.
34 pour cent termin‚.
35 pour cent termin‚.
36 pour cent termin‚.
37 pour cent termin‚.
38 pour cent termin‚.
39 pour cent termin‚.
40 pour cent termin‚.
41 pour cent termin‚.
42 pour cent termin‚.
43 pour cent termin‚.
44 pour cent termin‚.
45 pour cent termin‚.
46 pour cent termin‚.
47 pour cent termin‚.
48 pour cent termin‚.
49 pour cent termin‚.
50 pour cent termin‚.
51 pour cent termin‚.
52 pour cent termin‚.
53 pour cent termin‚.
54 pour cent termin‚.
55 pour cent termin‚.
56 pour cent termin‚.
57 pour cent termin‚.
58 pour cent termin‚.
59 pour cent termin‚.
60 pour cent termin‚.
61 pour cent termin‚.
62 pour cent termin‚.
63 pour cent termin‚.
64 pour cent termin‚.
65 pour cent termin‚.
66 pour cent termin‚.
67 pour cent termin‚.
68 pour cent termin‚.
69 pour cent termin‚.
70 pour cent termin‚.
71 pour cent termin‚.
72 pour cent termin‚.
73 pour cent termin‚.
74 pour cent termin‚.
75 pour cent termin‚.
76 pour cent termin‚.
77 pour cent termin‚.
78 pour cent termin‚.
79 pour cent termin‚.
80 pour cent termin‚.
81 pour cent termin‚.
82 pour cent termin‚.
83 pour cent termin‚.
84 pour cent termin‚.
85 pour cent termin‚.
86 pour cent termin‚.
87 pour cent termin‚.
88 pour cent termin‚.
89 pour cent termin‚.
90 pour cent termin‚.
91 pour cent termin‚.
92 pour cent termin‚.
93 pour cent termin‚.
94 pour cent termin‚.
95 pour cent termin‚.
96 pour cent termin‚.
97 pour cent termin‚.
98 pour cent termin‚.
99 pour cent termin‚.
100 pour cent termin‚.
La v‚rification des descripteurs de s‚curit‚ est termin‚e.
CHKDSK v‚rifie le journal USN...
V‚rification du journal USN termin‚e.
Windows a v‚rifi‚ le systŠme de fichiers sans trouver de problŠme.
37642132 Ko d'espace disque au total.
18395228 Ko dans 87978 fichiers.
38888 Ko dans 10975 index.
4 Ko dans des secteurs d‚fectueux.
214184 Ko utilis‚s par le systŠme.
65536 Ko occup‚s par le fichier journal.
18993828 Ko disponibles sur le disque.
4096 octets dans chaque unit‚ d'allocation.
9410533 unit‚s d'allocation au total sur le disque.
4748457 unit‚s d'allocation disponibles sur le disque.
Sur tes captures, on ne voit pas d'espace non alloué contigu.
Donc je ne comprends pas comment tu as pu demander un agrandissement de 36 à 70G.
Comme l'agrandissement n'a pas été possible, j'ai créé un nouvelle partition ( SDB3) dont je n'avais pas l'utilité.
Dans cette partition, j'ai mis ce que j'avais à y mettre et je viens d'y recopier le contenu de cette partition (SDB4) que je ne peux agrandir.
- -
Que venait faire l'option --enable-libparted-dmraid ?
Sur ce point, absolument aucune idée. C'est par GPARTED que je voulais agrandir.
Maintenant, J'ai décalé la partition SDB3 sur la droite afin de permettre un éventuel agrandissement, Mais, dès le branchement du disque, la partition semble immédiatement en anomalie. http://hpics.li/04402a8 Je vais regarder si malgré tout la suite est possible.
Même problème. Mais j'ai vu que je me suis trompé dans la codif de la commande. Je relance donc avec chkdsk /f /r m:>chkdsk.txt. C'est sacrément plus long!!!!
Dernière modification par Bougron (Le 15/04/2016, à 01:25)
Hors ligne
#6 Le 15/04/2016, à 01:54
- moko138
Re : [FYI] Agrandissement d'une partition.
OK c'est un peu plus clair.
la partition semble immédiatement en anomalie
aux yeux de gparted. Mais
1) je crois que tu as oublié de redémarrer windows (si possible cet XP lui-même) deux fois, juste après le chkdsk.
2) cette anomalie aux yeux de gparted mais pas aux yeux de windows est classique, justement, me semble-t-il après l'oubli ci-dessus.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#7 Le 15/04/2016, à 02:04
- moko138
Re : [FYI] Agrandissement d'une partition.
chkdsk /f /r m:>chkdsk.txt
/f est inutile quand tu emploies /r
/f Corrige les erreurs sur le disque. Le disque doit être verrouillé. Si chkdsk ne peut pas verrouiller le lecteur, un message s'affiche vous demandant que si vous souhaitez vérifier le lecteur la prochaine fois que vous redémarrez l'ordinateur.
/r Localise les secteurs défectueux et récupère les informations lisibles. Le disque doit être verrouillé.
/r inclut la fonctionnalité de /f, avec une analyse supplémentaire des erreurs de disque physique./b NTFS seulement : efface la liste des clusters défectueux sur le volume et l'analyse (sic) à nouveau tous les clusters alloués et libres pour les erreurs.
/b inclut les fonctionnalités de /r. Utilisez ce paramètre après imaging un volume vers un nouveau lecteur de disque dur.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#8 Le 15/04/2016, à 03:16
- Bougron
Re : [FYI] Agrandissement d'une partition.
Bonsoir Moko138.
C'est juste un point. La première consigne de ubuntu est
* run 'chkdsk /f /r' on Windows and rebooot it TWICE!
Donc j'ai laissé /f mais je pense que ce n'est pas gênant.
Je n'ai pas booté deux fois windows XP mais j'ai démonté deux fois le disque externe en demandant un démontage en toute sécurité.
Je pense que cela revient au même. De plus, j'ai regardé le premier compte rendu, le second compte rendu, Il sont identiques.
D'ailleurs le 3eme et le 4e me semblent très semblables aux deux premiers.
La seconde consigne de ubuntu est
Then you can resize
NTFS safely by additionally using the --bad-sectors option of ntfsresize.*
Cela je voudrais bien comprendre comment faire avec gparted. Je vais renter de reprendre en ligne de commande.
La commande listée est
ntfsresize -i -f -v /dev/sdc4
donc probablement
ntfsresize -i -f -v --bad-sectors /dev/sdc4
Mais je suis convaincu qu'il faut d'autres paramètres par exemple la nouvelle taille
....
u14044@u14044:~$ sudo ntfsresize -i -f -v -b /dev/sdc4
[sudo] password for u14044:
ntfsresize v2013.1.13AR.1 (libntfs-3g)
Device name : /dev/sdc4
NTFS volume version: 3.1
Cluster size : 4096 bytes
Current volume size: 38545543680 bytes (38546 MB)
Current device size: 38545653760 bytes (38546 MB)
Checking for bad sectors ...
Bad cluster: 0x60ba47 - 0x60ba47 (1)
WARNING: This software has detected that the disk has at least 1 bad sector.
WARNING: Bad sectors can cause reliability problems and massive data loss!!!
Checking filesystem consistency ...
100.00 percent completed
Accounting clusters ...
Space in use : 19096 MB (49,5%)
Collecting resizing constraints ...
Estimating smallest shrunken size supported ...
File feature Last used at By inode
Multi-Record : 38206 MB 55608
$MFTMirr : 21819 MB 1
Compressed : 38540 MB 9566
Sparse : 38101 MB 44373
Ordinary : 38546 MB 71441
You might resize at 19095867392 bytes or 19096 MB (freeing 19450 MB).
Please make a test run using both the -n and -s options before real resizing!
u14044@u14044:~$
u14044@u14044:~$ sudo ntfsresize -n -f -v -b -s48332M /dev/sdc4
ntfsresize v2013.1.13AR.1 (libntfs-3g)
Device name : /dev/sdc4
NTFS volume version: 3.1
Cluster size : 4096 bytes
Current volume size: 38545543680 bytes (38546 MB)
Current device size: 38545653760 bytes (38546 MB)
New volume size : 48331993600 bytes (48332 MB)
ERROR: New size can't be bigger than the device size.
If you want to enlarge NTFS then first enlarge the device size by e.g. fdisk.
u14044@u14044:~$
Je verrais la suite demain.
Hors ligne
#9 Le 15/04/2016, à 03:51
- moko138
Re : [FYI] Agrandissement d'une partition.
Je n'ai pas booté deux fois windows XP mais j'ai démonté deux fois le disque externe en demandant un démontage en toute sécurité.
Ce n'est pas pareil.
Il faut laisser windows terminer sa cuisine interne.
- -
Par ailleurs, puisque tu veux redimensionner une NTFS et que tu as windows, je ne comprends pas que tu utilises cet outil linux qu'est ntfsresize.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#10 Le 15/04/2016, à 09:27
- Bougron
Re : [FYI] Agrandissement d'une partition.
Je n'ai pas booté deux fois windows XP mais j'ai démonté deux fois le disque externe en demandant un démontage en toute sécurité.
Ce n'est pas pareil.
Il faut laisser windows terminer sa cuisine interne..
Lorsque windows XP décide de m'indiquer que je peux démonter la partition en toute sécurité, j'ai confiance dans ce qu'il dit.
Lorsque je demande a windows XP de se terminer, et qu'il me dit qu'il s'arrêtera lorsque il aura fini d'installer ses mises à jours, et qu'il s'arrête enfin, je ne vois pas pourquoi il faudrait encore recommencer une fois de plus.
Par ailleurs, puisque tu veux redimensionner une NTFS et que tu as windows, je ne comprends pas que tu utilises cet outil linux qu'est ntfsresize.
Ce matin, au lieu de lancer ubuntu 14.04.4, j'ai lancé windows 10 et redimensionné sans problème.
Mais revenu sous ubuntu, le problème reste entier pour le seul logiciel de gestion de parrtition que je connaisse 'GPARTED".
Mais le logiciel conseillé par gparted est déconseillé par ubuntu
u14044@u14044:~$ sudo apt-get install ntfsprogs
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Aucune version du paquet ntfsprogs n'est disponible, mais il existe dans la base
de données. Cela signifie en général que le paquet est manquant, qu'il est devenu obsolète
ou qu'il n'est disponible que sur une autre source.
E: Le paquet « ntfsprogs » n'a pas de version susceptible d'être installée
u14044@u14044:~$
et ntfs-3g est installé par défaut.
Au lieu de me conseiller bêtement d'utiliser windows pour "CHECKER", il devrait me dire ce qu tu viens de me conseiller.
Remarque, Tout cela à cause de ce petit problème, insurmontable pour GPARTED 4 Ko dans des secteurs défectueux.
Dernière modification par Bougron (Le 15/04/2016, à 09:47)
Hors ligne
#11 Le 16/04/2016, à 05:59
- moko138
Re : [FYI] Agrandissement d'une partition.
ntfsresize n'est pas l'outil adapté. En tout cas pas seul :
man ntfsresize
Enlargement
To enlarge an NTFS filesystem, first you must enlarge the size of the underlying partition.
This can be done using fdisk(8) by deleting the partition and recreating it with a larger size.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne