BIOS lent à démarrer

paulwoisard · Le 21/04/2016, à 14:27

Bonjour,

J'ai un problème gênant, la page du BIOS au démarrage met environ cinq minutes à apparaître.

Après Ubuntu (15.10) démarre relativement normalement, il y a des erreurs message du forum que j'ai ouvert . Le problème ne m’empêche pas de me servir du PC.

Mais ce temps de latence est très ennuyant.
Si quelqu'un peut m'aider.

Merci d'avance.

Pour info, le PC est un HP Pavilion dv6710ef, un vieux pc portable.

Dernière modification par paulwoisard (Le 21/04/2016, à 19:03)

Bougron · Le 21/04/2016, à 17:32

Bonjour
Il faudrait que tu donnes la totalité du fichier de trace du boot et non un petit morceau

dmesg   >trace.txt
gedit trace.txt

et un état de la qualité du disque.
Tu installes l'application GSMARTCONTROL via la logithèque et tu donnes le résultat de la commande

sudo smartctl  -s   on  -a  /dev/sda

paulwoisard · Le 21/04/2016, à 18:50

Bonjour,

La première commande renvoi ceci :

paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$ dmesg >trace.txt
paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$ gedit trace.txt

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-35-generic (buildd@lgw01-43) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #40-Ubuntu SMP Tue Mar 15 22:15:45 UTC 2016 (Ubuntu 4.2.0-35.40-generic 4.2.8-ckt5)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-35-generic root=UUID=fc7186f2-db44-4466-8de1-933590c90406 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] tseg: 007ff80000
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff5ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff60000-0x000000007ff6dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007ff6e000-0x000000007ff6efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ff6f000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv6700 Notebook PC    /30D0, BIOS F.27     01/11/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7ff60 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DEFFF uncachable
[    0.000000]   DF000-DFFFF write-protect
[    0.000000]   E0000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000f8640-0x000f864f] mapped at [ffff8800000f8640]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x021f1000, 0x021f1fff] PGTABLE
[    0.000000] BRK [0x021f2000, 0x021f2fff] PGTABLE
[    0.000000] BRK [0x021f3000, 0x021f3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[    0.000000]  [mem 0x7fc00000-0x7fdfffff] page 2M
[    0.000000] BRK [0x021f4000, 0x021f4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x60000000-0x7fbfffff]
[    0.000000]  [mem 0x60000000-0x7fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[    0.000000]  [mem 0x40000000-0x5fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ff5ffff]
[    0.000000]  [mem 0x7fe00000-0x7ff5ffff] page 4k
[    0.000000] BRK [0x021f5000, 0x021f5fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x340d0000-0x3605ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F8590 000024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 0x000000007FF643CD 00006C (v01 HPQOEM SLIC-MPC 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 0x000000007FF6D8E8 0000F4 (v03 NVIDIA MCP65-E  06040000 PTL_ 000F4240)
[    0.000000] ACPI: DSDT 0x000000007FF64439 00943B (v01 NVIDIA MCP65    06040000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x000000007FF6EFC0 000040
[    0.000000] ACPI: FACS 0x000000007FF6EFC0 000040
[    0.000000] ACPI: SRAT 0x000000007FF6D9DC 0000A0 (v01 AMD    HAMMER   06040000 AMD  00000001)
[    0.000000] ACPI: WDAT 0x000000007FF6DA7C 000104 (v01 PTLTD  WDATTBL  06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 0x000000007FF6DB80 000206 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
[    0.000000] ACPI: MCFG 0x000000007FF6DD86 00003C (v01 HP       MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: HPET 0x000000007FF6DDC2 000038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
[    0.000000] ACPI: APIC 0x000000007FF6DDFA 000068 (v01 HP     ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 0x000000007FF6DE62 000028 (v01 HP     $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 0x000000007FF6DE8A 000176 (v01 HPQOEM SLIC-MPC 06040000  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x7fffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x7ff5ffff] -> [mem 0x00000000-0x7ff5ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7ff5b000-0x7ff5ffff]
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007ff5ffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ff5ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ff5ffff]
[    0.000000] On node 0 totalpages: 524028
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8126 pages used for memmap
[    0.000000]   DMA32 zone: 520032 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88007fc00000 s96728 r8192 d30248 u1048576
[    0.000000] pcpu-alloc: s96728 r8192 d30248 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515817
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-35-generic root=UUID=fc7186f2-db44-4466-8de1-933590c90406 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xf382000000-0xf383ffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 2012008K/2096112K available (8182K kernel code, 1239K rwdata, 3804K rodata, 1464K init, 1292K bss, 84104K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:16640 nr_irqs:440 16
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-1.
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2009.067 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.13 BogoMIPS (lpj=8036268)
[    0.004021] pid_max: default: 32768 minimum: 301
[    0.004030] ACPI: Core revision 20150619
[    0.015694] ACPI: All ACPI Tables successfully acquired
[    0.015727] Security Framework initialized
[    0.015743] AppArmor: AppArmor initialized
[    0.015744] Yama: becoming mindful.
[    0.016037] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.017220] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.017834] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.017841] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.018176] Initializing cgroup subsys blkio
[    0.018182] Initializing cgroup subsys memory
[    0.018196] Initializing cgroup subsys devices
[    0.018200] Initializing cgroup subsys freezer
[    0.018204] Initializing cgroup subsys net_cls
[    0.018208] Initializing cgroup subsys perf_event
[    0.018212] Initializing cgroup subsys net_prio
[    0.018216] Initializing cgroup subsys hugetlb
[    0.018243] CPU: Physical Processor ID: 0
[    0.018245] CPU: Processor Core ID: 0
[    0.018248] mce: CPU supports 5 MCE banks
[    0.018258] LVT offset 0 assigned for vector 0xf9
[    0.018262] process: using AMD E400 aware idle routine
[    0.018265] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.018267] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.018567] Freeing SMP alternatives memory: 28K (ffffffff820a5000 - ffffffff820ac000)
[    0.024008] ftrace: allocating 30947 entries in 121 pages
[    0.040650] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080000] smpboot: CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (fam: 0f, model: 68, stepping: 02)
[    0.080000] Performance Events: AMD PMU driver.
[    0.080000] ... version:                0
[    0.080000] ... bit width:              48
[    0.080000] ... generic registers:      4
[    0.080000] ... value mask:             0000ffffffffffff
[    0.080000] ... max period:             00007fffffffffff
[    0.080000] ... fixed-purpose events:   0
[    0.080000] ... event mask:             000000000000000f
[    0.080000] x86: Booting SMP configuration:
[    0.080000] .... node  #0, CPUs:      #1
[    0.080281] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.156034] process: System has AMD C1E enabled
[    0.156047] x86: Booted up 1 node, 2 CPUs
[    0.156051] smpboot: Total of 2 processors activated (8036.34 BogoMIPS)
[    0.156039] process: Switch to broadcast mode on CPU1
[    0.156657] process: Switch to broadcast mode on CPU0
[    0.156657] devtmpfs: initialized
[    0.162340] evm: security.selinux
[    0.162342] evm: security.SMACK64
[    0.162344] evm: security.SMACK64EXEC
[    0.162345] evm: security.SMACK64TRANSMUTE
[    0.162346] evm: security.SMACK64MMAP
[    0.162348] evm: security.ima
[    0.162349] evm: security.capability
[    0.162402] PM: Registering ACPI NVS region [mem 0x7ff6e000-0x7ff6efff] (4096 bytes)
[    0.162402] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.162402] pinctrl core: initialized pinctrl subsystem
[    0.162402] RTC time: 16:36:41, date: 04/21/16
[    0.162402] NET: Registered protocol family 16
[    0.168010] cpuidle: using governor ladder
[    0.176008] cpuidle: using governor menu
[    0.176011] node 0 link 0: io port [1000, fffff]
[    0.176014] TOM: 0000000080000000 aka 2048M
[    0.176017] node 0 link 0: mmio [a0000, bffff]
[    0.176021] node 0 link 0: mmio [80000000, dfffffff]
[    0.176023] node 0 link 0: mmio [e0000000, efffffff]
[    0.176025] node 0 link 0: mmio [f0000000, fe0bffff]
[    0.176028] bus: [bus 00-ff] on node 0 link 0
[    0.176031] bus: 00 [io  0x0000-0xffff]
[    0.176033] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.176035] bus: 00 [mem 0x80000000-0xfcffffffff]
[    0.176094] Simple Boot Flag at 0x36 set to 0x1
[    0.176151] ACPI: bus type PCI registered
[    0.176154] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.176268] PCI: MMCONFIG for domain 0000 [bus 00-08] at [mem 0xe0000000-0xe08fffff] (base 0xe0000000)
[    0.176272] PCI: MMCONFIG at [mem 0xe0000000-0xe08fffff] reserved in E820
[    0.176287] PCI: Using configuration type 1 for base access
[    0.176502] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.176503] mtrr: probably your BIOS does not setup all CPUs.
[    0.176505] mtrr: corrected configuration.
[    0.180154] ACPI: Added _OSI(Module Device)
[    0.180157] ACPI: Added _OSI(Processor Device)
[    0.180159] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.180161] ACPI: Added _OSI(Processor Aggregator Device)
[    0.183277] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.184407] ACPI : EC: EC started
[    0.184475] ACPI: Interpreter enabled
[    0.184484] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    0.184490] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.184508] ACPI: (supports S0 S3 S4 S5)
[    0.184510] ACPI: Using IOAPIC for interrupt routing
[    0.184545] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.192341] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.192352] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.192360] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.192429] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cd1ff])
[    0.192435] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-08] only partially covers this bridge
[    0.192645] PCI host bridge to bus 0000:00
[    0.192649] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.192652] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.192655] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.192658] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.192662] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.192664] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.192667] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.192670] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.192673] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.192676] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.192679] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.192682] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.192685] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.192688] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.192691] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.192694] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.192697] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.192700] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.192720] pci 0000:00:00.0: [10de:0444] type 00 class 0x050000
[    0.192963] pci 0000:00:01.0: [10de:0442] type 00 class 0x060100
[    0.192972] pci 0000:00:01.0: reg 0x10: [io  0x1d00-0x1dff]
[    0.193095] pci 0000:00:01.1: [10de:0446] type 00 class 0x0c0500
[    0.193106] pci 0000:00:01.1: reg 0x10: [io  0x3080-0x30bf]
[    0.193123] pci 0000:00:01.1: reg 0x20: [io  0x3040-0x307f]
[    0.193129] pci 0000:00:01.1: reg 0x24: [io  0x3000-0x303f]
[    0.193157] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.193271] pci 0000:00:01.3: [10de:0447] type 00 class 0x0b4000
[    0.193290] pci 0000:00:01.3: reg 0x10: [mem 0xf2200000-0xf227ffff]
[    0.193479] pci 0000:00:02.0: [10de:0454] type 00 class 0x0c0310
[    0.193489] pci 0000:00:02.0: reg 0x10: [mem 0xf2486000-0xf2486fff]
[    0.193527] pci 0000:00:02.0: supports D1 D2
[    0.193530] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.193637] pci 0000:00:02.1: [10de:0455] type 00 class 0x0c0320
[    0.193648] pci 0000:00:02.1: reg 0x10: [mem 0xf2488000-0xf24880ff]
[    0.193690] pci 0000:00:02.1: supports D1 D2
[    0.193693] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.193809] pci 0000:00:06.0: [10de:0450] type 00 class 0x020000
[    0.193819] pci 0000:00:06.0: reg 0x10: [mem 0xf2487000-0xf2487fff]
[    0.193824] pci 0000:00:06.0: reg 0x14: [io  0x30e0-0x30e7]
[    0.193856] pci 0000:00:06.0: supports D1 D2
[    0.193859] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.193940] pci 0000:00:06.0: System wakeup disabled by ACPI
[    0.194003] pci 0000:00:07.0: [10de:044a] type 00 class 0x040300
[    0.194014] pci 0000:00:07.0: reg 0x10: [mem 0xf2480000-0xf2483fff]
[    0.194058] pci 0000:00:07.0: PME# supported from D3hot D3cold
[    0.194172] pci 0000:00:08.0: [10de:0449] type 01 class 0x060401
[    0.194251] pci 0000:00:08.0: System wakeup disabled by ACPI
[    0.194312] pci 0000:00:09.0: [10de:0448] type 00 class 0x01018a
[    0.194336] pci 0000:00:09.0: reg 0x20: [io  0x30c0-0x30cf]
[    0.194348] pci 0000:00:09.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.194350] pci 0000:00:09.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.194353] pci 0000:00:09.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.194356] pci 0000:00:09.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.194463] pci 0000:00:0a.0: [10de:045d] type 00 class 0x010185
[    0.194472] pci 0000:00:0a.0: reg 0x10: [io  0x30f8-0x30ff]
[    0.194478] pci 0000:00:0a.0: reg 0x14: [io  0x30ec-0x30ef]
[    0.194483] pci 0000:00:0a.0: reg 0x18: [io  0x30f0-0x30f7]
[    0.194489] pci 0000:00:0a.0: reg 0x1c: [io  0x30e8-0x30eb]
[    0.194494] pci 0000:00:0a.0: reg 0x20: [io  0x30d0-0x30df]
[    0.194499] pci 0000:00:0a.0: reg 0x24: [mem 0xf2484000-0xf2485fff]
[    0.194619] pci 0000:00:0b.0: [10de:045b] type 01 class 0x060400
[    0.194652] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.194703] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.194765] pci 0000:00:0c.0: [10de:045a] type 01 class 0x060400
[    0.194796] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.194905] pci 0000:00:0d.0: [10de:0458] type 01 class 0x060400
[    0.194936] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195047] pci 0000:00:0e.0: [10de:0459] type 01 class 0x060400
[    0.195078] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195190] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.195292] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.195398] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.195496] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.195654] pci 0000:07:05.0: [1180:0832] type 00 class 0x0c0010
[    0.195664] pci 0000:07:05.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.195666] pci 0000:07:05.0: MMC cards are now supported by standard SDHCI controller
[    0.195677] pci 0000:07:05.0: reg 0x10: [mem 0xf2100000-0xf21007ff]
[    0.195734] pci 0000:07:05.0: supports D1 D2
[    0.195737] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196060] pci 0000:07:05.1: [1180:0822] type 00 class 0x080500
[    0.196073] pci 0000:07:05.1: reg 0x10: [mem 0xf2100800-0xf21008ff]
[    0.196129] pci 0000:07:05.1: supports D1 D2
[    0.196132] pci 0000:07:05.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196197] pci 0000:07:05.2: [1180:0592] type 00 class 0x088000
[    0.196210] pci 0000:07:05.2: reg 0x10: [mem 0xf2101000-0xf21010ff]
[    0.196265] pci 0000:07:05.2: supports D1 D2
[    0.196268] pci 0000:07:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196334] pci 0000:07:05.3: [1180:0852] type 00 class 0x088000
[    0.196347] pci 0000:07:05.3: reg 0x10: [mem 0xf2101400-0xf21014ff]
[    0.196402] pci 0000:07:05.3: supports D1 D2
[    0.196405] pci 0000:07:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196492] pci 0000:00:08.0: PCI bridge to [bus 07] (subtractive decode)
[    0.196498] pci 0000:00:08.0:   bridge window [mem 0xf2100000-0xf21fffff]
[    0.196502] pci 0000:00:08.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.196505] pci 0000:00:08.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.196509] pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.196511] pci 0000:00:08.0:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[    0.196514] pci 0000:00:08.0:   bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[    0.196518] pci 0000:00:08.0:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[    0.196521] pci 0000:00:08.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.196523] pci 0000:00:08.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.196527] pci 0000:00:08.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.196530] pci 0000:00:08.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.196533] pci 0000:00:08.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.196536] pci 0000:00:08.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.196539] pci 0000:00:08.0:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[    0.196542] pci 0000:00:08.0:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[    0.196545] pci 0000:00:08.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.196548] pci 0000:00:08.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.196552] pci 0000:00:08.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.196621] acpiphp: Slot [1] registered
[    0.196627] pci 0000:00:0b.0: PCI bridge to [bus 01]
[    0.196691] pci 0000:03:00.0: [168c:001c] type 00 class 0x020000
[    0.196711] pci 0000:03:00.0: reg 0x10: [mem 0xf2000000-0xf200ffff 64bit]
[    0.196858] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.196866] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.196871] pci 0000:00:0c.0:   bridge window [mem 0xf2000000-0xf20fffff]
[    0.196941] pci 0000:05:00.0: [10de:0427] type 00 class 0x030000
[    0.196961] pci 0000:05:00.0: reg 0x10: [mem 0xce000000-0xceffffff]
[    0.196978] pci 0000:05:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.196996] pci 0000:05:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit]
[    0.197009] pci 0000:05:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.197022] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.200020] pci 0000:00:0d.0: PCI bridge to [bus 05]
[    0.200025] pci 0000:00:0d.0:   bridge window [io  0x4000-0x4fff]
[    0.200029] pci 0000:00:0d.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.200033] pci 0000:00:0d.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.200111] acpiphp: Slot [1-1] registered
[    0.200117] pci 0000:00:0e.0: PCI bridge to [bus 09]
[    0.200122] pci 0000:00:0e.0:   bridge window [io  0x5000-0x5fff]
[    0.200125] pci 0000:00:0e.0:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.200130] pci 0000:00:0e.0:   bridge window [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.200147] pci_bus 0000:00: on NUMA node 0
[    0.200781] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *15
[    0.200888] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *10
[    0.200990] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
[    0.201092] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
[    0.201193] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *11
[    0.201295] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[    0.201396] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
[    0.201497] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *15
[    0.201598] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
[    0.201699] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
[    0.201803] ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7
[    0.201904] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
[    0.202010] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *11
[    0.202116] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
[    0.202219] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5
[    0.202325] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *0, disabled.
[    0.202861] ACPI: Enabled 4 GPEs in block 00 to 1F
[    0.202922] ACPI : EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.204031] vgaarb: setting as boot device: PCI:0000:05:00.0
[    0.204031] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.204031] vgaarb: loaded
[    0.204031] vgaarb: bridge control possible 0000:05:00.0
[    0.204434] SCSI subsystem initialized
[    0.204468] libata version 3.00 loaded.
[    0.204468] ACPI: bus type USB registered
[    0.204468] usbcore: registered new interface driver usbfs
[    0.204468] usbcore: registered new interface driver hub
[    0.204468] usbcore: registered new device driver usb
[    0.208016] PCI: Using ACPI for IRQ routing
[    0.208123] PCI: pci_cache_line_size set to 64 bytes
[    0.208191] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.208193] e820: reserve RAM buffer [mem 0x7ff60000-0x7fffffff]
[    0.208382] NetLabel: Initializing
[    0.208384] NetLabel:  domain hash size = 128
[    0.208385] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.208402] NetLabel:  unlabeled traffic allowed by default
[    0.208443] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.208443] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.208443] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.210119] clocksource: Switched to clocksource hpet
[    0.219566] AppArmor: AppArmor Filesystem Enabled
[    0.219690] pnp: PnP ACPI init
[    0.220323] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.220330] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.220411] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20150619/dsopcode-236)
[    0.220418] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node ffff88007d0a5460), AE_AML_BUFFER_LIMIT (20150619/psparse-536)
[    0.220430] ACPI Error: Method execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node ffff88007d0a5460), AE_AML_BUFFER_LIMIT (20150619/uteval-103)
[    0.220439] pnp 00:01: can't evaluate _CRS: 12298
[    0.220491] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.220569] system 00:02: [io  0x0360-0x0361] has been reserved
[    0.220573] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.220577] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.220637] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.220691] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.220745] pnp 00:05: Plug and Play ACPI device, IDs SYN013b SYN0100 SYN0002 PNP0f13 (active)
[    0.221183] system 00:06: [mem 0xffc00000-0xffffffff] could not be reserved
[    0.221187] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.221190] system 00:06: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.221194] system 00:06: [mem 0xfec80000-0xfec80fff] has been reserved
[    0.221197] system 00:06: [mem 0xfef00000-0xfef00fff] has been reserved
[    0.221202] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.221302] pnp: PnP ACPI: found 7 devices
[    0.229770] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.229811] pci 0000:00:08.0: PCI bridge to [bus 07]
[    0.229817] pci 0000:00:08.0:   bridge window [mem 0xf2100000-0xf21fffff]
[    0.229823] pci 0000:00:0b.0: PCI bridge to [bus 01]
[    0.229829] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.229833] pci 0000:00:0c.0:   bridge window [mem 0xf2000000-0xf20fffff]
[    0.229842] pci 0000:05:00.0: BAR 6: no space for [mem size 0x00020000 pref]
[    0.229846] pci 0000:05:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
[    0.229848] pci 0000:00:0d.0: PCI bridge to [bus 05]
[    0.229852] pci 0000:00:0d.0:   bridge window [io  0x4000-0x4fff]
[    0.229855] pci 0000:00:0d.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.229859] pci 0000:00:0d.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.229864] pci 0000:00:0e.0: PCI bridge to [bus 09]
[    0.229866] pci 0000:00:0e.0:   bridge window [io  0x5000-0x5fff]
[    0.229870] pci 0000:00:0e.0:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.229874] pci 0000:00:0e.0:   bridge window [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.229880] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.229882] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.229885] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.229889] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.229891] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.229895] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.229898] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.229901] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.229904] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.229907] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.229910] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.229913] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.229916] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.229919] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.229922] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.229926] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window]
[    0.229929] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff window]
[    0.229932] pci_bus 0000:07: resource 1 [mem 0xf2100000-0xf21fffff]
[    0.229935] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.229938] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.229942] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.229945] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.229948] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.229952] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.229955] pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.229958] pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.229962] pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.229965] pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.229968] pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.229971] pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.229975] pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.229978] pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff window]
[    0.229981] pci_bus 0000:07: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.229985] pci_bus 0000:07: resource 19 [mem 0xfed40000-0xfed44fff window]
[    0.229988] pci_bus 0000:07: resource 20 [mem 0x80000000-0xfebfffff window]
[    0.229992] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
[    0.229994] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.229997] pci_bus 0000:05: resource 1 [mem 0xcc000000-0xceffffff]
[    0.230000] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.230004] pci_bus 0000:09: resource 0 [io  0x5000-0x5fff]
[    0.230006] pci_bus 0000:09: resource 1 [mem 0xf0000000-0xf1ffffff]
[    0.230010] pci_bus 0000:09: resource 2 [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.230064] NET: Registered protocol family 2
[    0.230310] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.230415] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.230546] TCP: Hash tables configured (established 16384 bind 16384)
[    0.230628] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.230654] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.230762] NET: Registered protocol family 1
[    0.231074] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
[    0.284280] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17
[    0.284371] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284420] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284480] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284536] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284596] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284658] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284694] pci 0000:05:00.0: Video device with shadowed ROM
[    0.284698] PCI: CLS 64 bytes, default 64
[    0.284801] Trying to unpack rootfs image as initramfs...
[    1.070707] Freeing initrd memory: 32320K (ffff8800340d0000 - ffff880036060000)
[    1.071131] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cf5a375cea, max_idle_ns: 440795255557 ns
[    1.071162] microcode: AMD CPU family 0xf not supported
[    1.071370] Scanning for low memory corruption every 60 seconds
[    1.071841] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.071866] Initialise system trusted keyring
[    1.071898] audit: initializing netlink subsys (disabled)
[    1.071926] audit: type=2000 audit(1461256601.068:1): initialized
[    1.072467] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.075462] zpool: loaded
[    1.075465] zbud: loaded
[    1.075785] VFS: Disk quotas dquot_6.6.0
[    1.075848] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.076810] fuse init (API version 7.23)
[    1.077076] Key type big_key registered
[    1.077792] Key type asymmetric registered
[    1.077797] Asymmetric key parser 'x509' registered
[    1.077821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.077882] io scheduler noop registered
[    1.077886] io scheduler deadline registered (default)
[    1.077949] io scheduler cfq registered
[    1.078390] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.078402] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.078458] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[    1.078459] vesafb: scrolling: redraw
[    1.078462] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.078486] vesafb: framebuffer at 0xcd000000, mapped to 0xffffc90000400000, using 4032k, total 4032k
[    1.097908] Console: switching to colour frame buffer device 160x50
[    1.120504] fb0: VESA VGA frame buffer device
[    1.121068] ACPI: AC Adapter [ACAD] (on-line)
[    1.121181] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.121425] ACPI: Lid Switch [LID]
[    1.121502] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.121506] ACPI: Power Button [PWRB]
[    1.121566] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.121570] ACPI: Sleep Button [SLPB]
[    1.121634] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.121637] ACPI: Power Button [PWRF]
[    1.121713] ACPI: processor limited to max C-state 1
[    1.122264] [Firmware Bug]: Invalid critical threshold (0)
[    1.122926] thermal LNXTHERM:00: registered as thermal_zone0
[    1.122928] ACPI: Thermal Zone [THRM] (52 C)
[    1.122983] GHES: HEST is not enabled!
[    1.123216] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.126649] Linux agpgart interface v0.103
[    1.130015] brd: module loaded
[    1.131683] loop: module loaded
[    1.132123] libphy: Fixed MDIO Bus: probed
[    1.132128] tun: Universal TUN/TAP device driver, 1.6
[    1.132129] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.132246] PPP generic driver version 2.4.2
[    1.132404] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.132413] ehci-pci: EHCI PCI platform driver
[    1.132552] ehci-pci 0000:00:02.1: EHCI Host Controller
[    1.132562] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.132573] ehci-pci 0000:00:02.1: debug port 1
[    1.132636] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    1.132661] ehci-pci 0000:00:02.1: irq 17, io mem 0xf2488000
[    1.148035] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.148113] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.148117] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.148119] usb usb1: Product: EHCI Host Controller
[    1.148122] usb usb1: Manufacturer: Linux 4.2.0-35-generic ehci_hcd
[    1.148124] usb usb1: SerialNumber: 0000:00:02.1
[    1.148337] hub 1-0:1.0: USB hub found
[    1.148348] hub 1-0:1.0: 10 ports detected
[    1.148711] ehci-platform: EHCI generic platform driver
[    1.148740] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.148747] ohci-pci: OHCI PCI platform driver
[    1.148840] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    1.148850] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.148893] ohci-pci 0000:00:02.0: irq 18, io mem 0xf2486000
[    1.206072] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.206075] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.206078] usb usb2: Product: OHCI PCI host controller
[    1.206081] usb usb2: Manufacturer: Linux 4.2.0-35-generic ohci_hcd
[    1.206084] usb usb2: SerialNumber: 0000:00:02.0
[    1.206258] hub 2-0:1.0: USB hub found
[    1.206269] hub 2-0:1.0: 10 ports detected
[    1.206783] ohci-platform: OHCI generic platform driver
[    1.206807] uhci_hcd: USB Universal Host Controller Interface driver
[    1.206911] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.229304] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.229311] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.229550] mousedev: PS/2 mouse device common for all mice
[    1.231461] rtc_cmos 00:03: RTC can wake from S4
[    1.231654] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.231697] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.231710] i2c /dev entries driver
[    1.231855] device-mapper: uevent: version 1.0.3
[    1.231977] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    1.232021] ledtrig-cpu: registered to indicate activity on CPUs
[    1.232222] PCCT header not found.
[    1.232595] NET: Registered protocol family 10
[    1.232875] NET: Registered protocol family 17
[    1.232893] Key type dns_resolver registered
[    1.233431] Loading compiled-in X.509 certificates
[    1.234880] Loaded X.509 cert 'Build time autogenerated kernel key: d2cd13f45fa3b012fc89b8d500f91dcca4d9e0a8'
[    1.234906] registered taskstats version 1
[    1.234931] zswap: loading zswap
[    1.234934] zswap: using zbud pool
[    1.234942] zswap: using lzo compressor
[    1.238767] Key type trusted registered
[    1.245935] Key type encrypted registered
[    1.245949] AppArmor: AppArmor sha1 policy hashing enabled
[    1.245954] ima: No TPM chip found, activating TPM-bypass!
[    1.245996] evm: HMAC attrs: 0x1
[    1.246387]   Magic number: 12:842:641
[    1.246528] rtc_cmos 00:03: setting system clock to 2016-04-21 16:36:42 UTC (1461256602)
[    1.246782] powernow_k8: fid 0xc (2000 MHz), vid 0x12
[    1.246784] powernow_k8: fid 0xa (1800 MHz), vid 0x13
[    1.246786] powernow_k8: fid 0x8 (1600 MHz), vid 0x14
[    1.246788] powernow_k8: fid 0x0 (800 MHz), vid 0x1e
[    1.246821] powernow_k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 (2 cpu cores) (version 2.20.00)
[    1.246836] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.246838] EDD information not available.
[    1.246929] PM: Hibernation image not present or could not be loaded.
[    1.253030] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.392378] ACPI: Battery Slot [BAT0] (battery present)
[    1.393378] Freeing unused kernel memory: 1464K (ffffffff81f37000 - ffffffff820a5000)
[    1.393383] Write protecting the kernel read-only data: 14336k
[    1.394829] Freeing unused kernel memory: 2044K (ffff880001801000 - ffff880001a00000)
[    1.395060] Freeing unused kernel memory: 292K (ffff880001db7000 - ffff880001e00000)
[    1.416676] random: systemd-udevd urandom read with 8 bits of entropy available
[    1.495769] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.499146] acpi device:26: registered as cooling_device2
[    1.499239] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/LNXVIDEO:01/input/input6
[    1.506322] pata_amd 0000:00:09.0: version 0.4.1
[    1.512044] scsi host0: pata_amd
[    1.512205] scsi host1: pata_amd
[    1.512267] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[    1.512270] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[    1.512327] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.512584] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[    1.515451] sdhci: Secure Digital Host Controller Interface driver
[    1.515455] sdhci: Copyright(c) Pierre Ossman
[    1.518406] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 22)
[    1.518662] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
[    1.519705] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.525161] sdhci-pci 0000:07:05.1: No vmmc regulator found
[    1.525168] sdhci-pci 0000:07:05.1: No vqmmc regulator found
[    1.526168] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.530724] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.531738] mmc0: SDHCI controller on PCI [0000:07:05.1] using DMA
[    1.532052] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
[    1.588093] firewire_ohci 0000:07:05.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    1.696320] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2
[    1.696332] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
[    1.728244] ata1.00: configured for MWDMA2
[    1.731316] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632N  0503 PQ: 0 ANSI: 5
[    1.757662] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.757667] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.757824] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.758005] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.758106] ata2: port disabled--ignoring
[    2.048969] forcedeth 0000:00:06.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:0b:b6:7a
[    2.048974] forcedeth 0000:00:06.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    2.050105] forcedeth 0000:00:06.0 enp0s6: renamed from eth0
[    2.050169] ahci 0000:00:0a.0: version 3.0
[    2.050410] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
[    2.050456] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[    2.050517] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    2.050521] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led clo pio ccc 
[    2.051408] scsi host2: ahci
[    2.051560] scsi host3: ahci
[    2.051707] scsi host4: ahci
[    2.051841] scsi host5: ahci
[    2.051916] ata3: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484100 irq 23
[    2.051919] ata4: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484180 irq 23
[    2.051922] ata5: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484200 irq 23
[    2.051925] ata6: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484280 irq 23
[    2.088153] firewire_core 0000:07:05.0: created device fw0: GUID 00241b004359ae00, S400
[    2.372030] ata6: SATA link down (SStatus 0 SControl 300)
[    2.372054] ata5: SATA link down (SStatus 0 SControl 300)
[    2.372083] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.372097] ata4: SATA link down (SStatus 0 SControl 300)
[    2.374518] ata3.00: ATA-8: SAMSUNG HM160HI, HH100-10, max UDMA/100
[    2.374521] ata3.00: 312581808 sectors, multi 16: LBA48 
[    2.377033] ata3.00: configured for UDMA/100
[    2.377190] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HM160HI  0-10 PQ: 0 ANSI: 5
[    2.377580] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.377651] sd 2:0:0:0: [sda] Write Protect is off
[    2.377654] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.377685] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.377707] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.430447]  sda: sda1 sda2 < sda5 >
[    2.430901] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.577227] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0/0x0, board id: 0, fw id: 300495
[    2.658489] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    7.915890] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    8.577139] random: nonblocking pool is initialized
[    9.127757] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    9.277726] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    9.277977] systemd[1]: Detected architecture x86-64.
[    9.293003] systemd[1]: Set hostname to <maryxaviere-HP-Pavilion-dv6700-Notebook-PC>.
[   10.541207] systemd[1]: Reached target User and Group Name Lookups.
[   10.541553] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.541585] systemd[1]: Reached target Encrypted Volumes.
[   10.541651] systemd[1]: Created slice Root Slice.
[   10.541732] systemd[1]: Listening on udev Control Socket.
[   10.541873] systemd[1]: Created slice User and Session Slice.
[   10.541940] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   10.541992] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.542015] systemd[1]: Reached target Remote File Systems (Pre).
[   10.542069] systemd[1]: Listening on udev Kernel Socket.
[   10.542191] systemd[1]: Listening on Journal Audit Socket.
[   10.542332] systemd[1]: Created slice System Slice.
[   10.543472] systemd[1]: Starting Increase datagram queue length...
[   10.543557] systemd[1]: Reached target Slices.
[   10.543895] systemd[1]: Created slice system-getty.slice.
[   10.544077] systemd[1]: Listening on Journal Socket.
[   10.545208] systemd[1]: Mounting Debug File System...
[   10.546633] systemd[1]: Started Read required files in advance.
[   10.673462] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   10.674754] systemd[1]: Starting Remount Root and Kernel File Systems...
[   10.676195] systemd[1]: Starting Setup Virtual Console...
[   10.677514] systemd[1]: Mounting Huge Pages File System...
[   10.678939] systemd[1]: Started Braille Device Support.
[   10.680413] systemd[1]: Mounting POSIX Message Queue File System...
[   10.780743] systemd[1]: Starting Load Kernel Modules...
[   10.780910] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.782211] systemd[1]: Starting udev Coldplug all Devices...
[   10.783608] systemd[1]: Starting Uncomplicated firewall...
[   10.829512] systemd[1]: Started Setup Virtual Console.
[   10.968429] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   10.969855] systemd[1]: Starting Create Static Device Nodes in /dev...
[   11.229060] systemd[1]: Mounted Debug File System.
[   11.229132] systemd[1]: Mounted POSIX Message Queue File System.
[   11.229161] systemd[1]: Mounted Huge Pages File System.
[   11.229573] systemd[1]: Started Increase datagram queue length.
[   11.238725] systemd[1]: Listening on Syslog Socket.
[   11.240052] systemd[1]: Starting Journal Service...
[   11.250370] systemd[1]: Started Uncomplicated firewall.
[   11.332087] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   11.333825] systemd[1]: Started Remount Root and Kernel File Systems.
[   11.452251] systemd[1]: Starting Load/Save Random Seed...
[   11.777830] systemd[1]: Started udev Coldplug all Devices.
[   11.911125] lp: driver loaded but no devices found
[   12.015389] ppdev: user-space parallel port driver
[   12.093728] systemd[1]: Started Journal Service.
[   12.330404] systemd-journald[226]: Received request to flush runtime journal from PID 1
[   15.959685] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[   15.959764] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[   16.053980] wmi: Mapper loaded
[   16.188464] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.292483] MCE: In-kernel MCE decoding enabled.
[   16.431141] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   16.432121] r592: driver successfully loaded
[   16.490357] EDAC MC: Ver: 3.0.0
[   16.589781] AMD64 EDAC driver v3.4.0
[   16.589834] EDAC amd64: DRAM ECC disabled.
[   16.589841] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   16.817737] [drm] Initialized drm 1.1.0 20060810
[   17.127927] input: HP WMI hotkeys as /devices/virtual/input/input8
[   17.153147] r852: Non dma capable device detected, dma disabled
[   17.153165] r852: driver loaded successfully
[   17.528240] kvm: disabled by bios
[   17.552731] kvm: disabled by bios
[   18.582501] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[   18.582533] snd_hda_intel 0000:00:07.0: Disabling MSI
[   18.847909] ath5k 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   18.848809] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 16
[   18.848906] ath5k 0000:03:00.0: registered as 'phy0'
[   19.112020] CE: hpet increased min_delta_ns to 11521 nsec
[   19.171674] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[   19.256031] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[   19.256038] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.256041] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   19.256044] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   19.256047] snd_hda_codec_conexant hdaudioC0D0:    dig-out=0x1c/0x0
[   19.256050] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   19.256053] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x17
[   19.366443] ath: EEPROM regdomain: 0x67
[   19.366448] ath: EEPROM indicates we should expect a direct regpair map
[   19.366452] ath: Country alpha2 being used: 00
[   19.366454] ath: Regpair used: 0x67
[   19.392051] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   19.546806] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   19.547238] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   19.550274] ath5k 0000:03:00.0 wlp3s0: renamed from wlan0
[   19.768843] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
[   19.768942] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
[   20.924895] cfg80211: World regulatory domain updated:
[   20.924903] cfg80211:  DFS Master region: unset
[   20.924905] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.924909] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.924911] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.924914] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   20.924917] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   20.924920] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   20.924923] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   20.924925] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   20.924928] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   22.312638] nvidia: module license 'NVIDIA' taints kernel.
[   22.312644] Disabling lock debugging due to kernel taint
[   22.326277] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   22.337653] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[   22.337694] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   22.339013] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:05:00.0 on minor 0
[   22.339032] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.96  Sun Nov  8 22:33:28 PST 2015
[   22.586007] Adding 2095100k swap on /dev/sda5.  Priority:-1 extents:1 across:2095100k FS
[   22.984867] audit: type=1400 audit(1461256624.236:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=438 comm="apparmor_parser"
[   22.984884] audit: type=1400 audit(1461256624.236:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=438 comm="apparmor_parser"
[   23.166401] audit: type=1400 audit(1461256624.416:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=438 comm="apparmor_parser"
[   23.166417] audit: type=1400 audit(1461256624.416:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=438 comm="apparmor_parser"
[   23.166425] audit: type=1400 audit(1461256624.416:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=438 comm="apparmor_parser"
[   23.166434] audit: type=1400 audit(1461256624.416:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=438 comm="apparmor_parser"
[   23.634889] audit: type=1400 audit(1461256624.884:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=438 comm="apparmor_parser"
[   23.634906] audit: type=1400 audit(1461256624.884:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=438 comm="apparmor_parser"
[   23.634915] audit: type=1400 audit(1461256624.884:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=438 comm="apparmor_parser"
[   23.634924] audit: type=1400 audit(1461256624.884:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=438 comm="apparmor_parser"
[   25.706541] zram: Added device: zram0
[   25.706675] zram: Added device: zram1
[   25.864575] cgroup: new mount options do not match the existing superblock, will be ignored
[   26.400677] zram0: detected capacity change from 0 to 524328960
[   26.633407] Adding 512036k swap on /dev/zram0.  Priority:5 extents:1 across:512036k SSFS
[   26.635002] zram1: detected capacity change from 0 to 524328960
[   26.641253] Adding 512036k swap on /dev/zram1.  Priority:5 extents:1 across:512036k SSFS
[   33.301700] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   33.310926] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   33.313645] IPv6: ADDRCONF(NETDEV_UP): enp0s6: link is not ready
[   33.314468] forcedeth 0000:00:06.0 enp0s6: no link during initialization
[   33.314774] IPv6: ADDRCONF(NETDEV_UP): enp0s6: link is not ready
[   34.378025] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   36.623086] wlp3s0: authenticate with 40:f2:01:73:fa:4c
[   36.627225] wlp3s0: send auth to 40:f2:01:73:fa:4c (try 1/3)
[   36.629140] wlp3s0: authenticated
[   36.632160] wlp3s0: associate with 40:f2:01:73:fa:4c (try 1/3)
[   36.635165] wlp3s0: RX AssocResp from 40:f2:01:73:fa:4c (capab=0x431 status=0 aid=4)
[   36.635262] wlp3s0: associated
[   36.635313] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   36.645836] ath: EEPROM regdomain: 0x80fa
[   36.645842] ath: EEPROM indicates we should expect a country code
[   36.645844] ath: doing EEPROM country->regdmn map search
[   36.645846] ath: country maps to regdmn code: 0x37
[   36.645848] ath: Country alpha2 being used: FR
[   36.645849] ath: Regpair used: 0x37
[   36.645852] ath: regdomain 0x80fa dynamically updated by country IE
[   36.645856] cfg80211: Regulatory domain changed to country: FR
[   36.645858] cfg80211:  DFS Master region: ETSI
[   36.645860] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   36.645863] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   36.645866] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   36.645869] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   36.645872] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[   36.645874] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   43.665469] NVRM: Your system is not currently configured to drive a VGA console
[   43.665477] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   43.665480] NVRM: requires the use of a text-mode VGA console. Use of other console
[   43.665483] NVRM: drivers including, but not limited to, vesafb, may result in
[   43.665485] NVRM: corruption and stability problems, and is not supported.

La deuxième commande cela :

paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$ sudo smartctl  -s   on  -a  /dev/sda
Mot de passe [sudo] pour paul : 
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.0-35-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint M5
Device Model:     SAMSUNG HM160HI
Serial Number:    S18PJF0PC50365
LU WWN Device Id: 5 0f0000 000350365
Firmware Version: HH100-10
User Capacity:    160 041 885 696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0
SATA Version is:  SATA 2.5, 1.5 Gb/s
Local Time is:    Thu Apr 21 18:48:46 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (  32)	The self-test routine was interrupted
					by the host with a hard or soft reset.
Total time to complete Offline 
data collection: 		(   62) seconds.
Offline data collection
capabilities: 			 (0x51) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  62) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   051    Pre-fail  Always       -       22
  3 Spin_Up_Time            0x0007   252   252   025    Pre-fail  Always       -       2062
  4 Start_Stop_Count        0x0032   097   097   000    Old_age   Always       -       3326
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   252   252   051    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0025   252   252   015    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       3283
 10 Spin_Retry_Count        0x0033   252   252   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       892
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1694
184 End-to-End_Error        0x0033   252   252   070    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       210
188 Command_Timeout         0x0032   252   252   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   061   045   040    Old_age   Always       -       39 (Min/Max 16/55)
191 G-Sense_Error_Rate      0x0032   098   098   000    Old_age   Always       -       22449
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       62
193 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       19552
194 Temperature_Celsius     0x0022   061   045   000    Old_age   Always       -       39 (Min/Max 16/55)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       16969
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   252   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000a   100   100   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x0032   252   252   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Interrupted [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$

Bougron · Le 21/04/2016, à 19:50

Il n'y a rien d'anormal pour la mise en route de UBUNTU faite en 44 secondes et le disque dur est en bon état malgré deux compteurs

191 G-Sense_Error_Rate      0x0032   098   098   000    Old_age   Always       -       22449
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       16969

paulwoisard · Le 21/04/2016, à 19:57

Ok Cool, mais il y a un truc pour le bios qui met de longues minutes à charger.

J'ai lu sur certain forum qu'il fallait flasher le BIOS (compliqué car il n'y a plus qu'Ubuntu) ou de démonté le PC pour enlever la pile et la remettre (compliqué c'est un portable).

Est-ce que ces méthodes seraient efficaces ?

Sinon, je me demandais si je bootais sur les cd de réparation de windows du PC, est-ce que je pourrais avoir un invite de commande pour flashé le BIOS ?

Ou faut-il laisser le pc en l'état ?

Bougron · Le 21/04/2016, à 20:16

Pour mettre à jour le bios, Chaque bios à sa façon de faire.
Cela va de la connexion directe du bios a son fabriquant et le téléchargement direct du nouveau bios.
a la fabrication d'une disquette d'installation
en passant par la mise à jour via windows ou la création d'une clé USB au format DOS

Lorsqu'un bios est en train de se mettre à jour, L'opération ne doit pas être interrompue.
Certains rares bios contrôlent que le logiciel qu'on veut leur faire utiliser est vraisemblable. La majorité NON
En règle générale, on met à jour le bios pour résoudre un problème et pas pour le plaisir d'avoir la dernière version.
Le constructeur indique toujours la raison de l'arrivée d'un nouveau bios. Mais l'explication peux être du style 'résolution de quelques bugs' ou 'permet de booter en LEGACY'

Tu peux te connecter au site du fournisseur du bios pour en savoir plus. Je peux d'aider à le trouver si tu donnes la référence commerciale du micro ou au pire de la carte mère si tu as assemblé toi-même le micro..

A noter que tu devrais regarder dans le bios les options générales.
Il peut y avoir une option de ce style.
Inspecter la totalité du matériel afin de tout rebâtir
Repartir avec la table de matériel qui a été constituée.

Ajout => le bios http://support.hp.com/ch-fr/drivers/sel … C11TA930O2
et son utilisation http://h10032.www1.hp.com/ctg/Manual/c00820099

Dernière modification par Bougron (Le 21/04/2016, à 22:06)

paulwoisard · Le 21/04/2016, à 20:46

Le PC c'est un HP Pavilion dv6710ef, la mise à jour du bios est un exécutable pour Windows. J'avais essayé de booter sur un live CD de Malekal, pour installer la mise à jour mais cela n'avait pas marché, il y avait un message comme quoi que la mise à jour ne s'appliquait pas à ce PC.

Sinon j'ai repéré l'autre jour dans le BIOS qu'il y avait une option pour analyser le boot et une autre pour analyser le disque dur, j'essaye ça.

paulwoisard · Le 21/04/2016, à 21:12

Dans le BIOS j'ai effectué un test de la mémoire et utilisé l'option remettre les paramètres par défaut.
Le reboot a été plus rapide pour accéder au BIOS mais l'erreur sur les ports USB est réapparu.
device descriptor read/64, error -62

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-35-generic (buildd@lgw01-43) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #40-Ubuntu SMP Tue Mar 15 22:15:45 UTC 2016 (Ubuntu 4.2.0-35.40-generic 4.2.8-ckt5)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-35-generic root=UUID=fc7186f2-db44-4466-8de1-933590c90406 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] tseg: 007ff80000
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff5ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff60000-0x000000007ff6dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007ff6e000-0x000000007ff6efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ff6f000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv6700 Notebook PC    /30D0, BIOS F.27     01/11/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7ff60 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DEFFF uncachable
[    0.000000]   DF000-DFFFF write-protect
[    0.000000]   E0000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000f8640-0x000f864f] mapped at [ffff8800000f8640]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x021f1000, 0x021f1fff] PGTABLE
[    0.000000] BRK [0x021f2000, 0x021f2fff] PGTABLE
[    0.000000] BRK [0x021f3000, 0x021f3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[    0.000000]  [mem 0x7fc00000-0x7fdfffff] page 2M
[    0.000000] BRK [0x021f4000, 0x021f4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x60000000-0x7fbfffff]
[    0.000000]  [mem 0x60000000-0x7fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[    0.000000]  [mem 0x40000000-0x5fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ff5ffff]
[    0.000000]  [mem 0x7fe00000-0x7ff5ffff] page 4k
[    0.000000] BRK [0x021f5000, 0x021f5fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x340d0000-0x3605ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F8590 000024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 0x000000007FF643CD 00006C (v01 HPQOEM SLIC-MPC 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 0x000000007FF6D8E8 0000F4 (v03 NVIDIA MCP65-E  06040000 PTL_ 000F4240)
[    0.000000] ACPI: DSDT 0x000000007FF64439 00943B (v01 NVIDIA MCP65    06040000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x000000007FF6EFC0 000040
[    0.000000] ACPI: FACS 0x000000007FF6EFC0 000040
[    0.000000] ACPI: SRAT 0x000000007FF6D9DC 0000A0 (v01 AMD    HAMMER   06040000 AMD  00000001)
[    0.000000] ACPI: WDAT 0x000000007FF6DA7C 000104 (v01 PTLTD  WDATTBL  06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 0x000000007FF6DB80 000206 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
[    0.000000] ACPI: MCFG 0x000000007FF6DD86 00003C (v01 HP       MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: HPET 0x000000007FF6DDC2 000038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
[    0.000000] ACPI: APIC 0x000000007FF6DDFA 000068 (v01 HP     ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 0x000000007FF6DE62 000028 (v01 HP     $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 0x000000007FF6DE8A 000176 (v01 HPQOEM SLIC-MPC 06040000  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x7fffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x7ff5ffff] -> [mem 0x00000000-0x7ff5ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7ff5b000-0x7ff5ffff]
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007ff5ffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ff5ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ff5ffff]
[    0.000000] On node 0 totalpages: 524028
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8126 pages used for memmap
[    0.000000]   DMA32 zone: 520032 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88007fc00000 s96728 r8192 d30248 u1048576
[    0.000000] pcpu-alloc: s96728 r8192 d30248 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515817
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-35-generic root=UUID=fc7186f2-db44-4466-8de1-933590c90406 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x100000000-0x101ffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 2012008K/2096112K available (8182K kernel code, 1239K rwdata, 3804K rodata, 1464K init, 1292K bss, 84104K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:16640 nr_irqs:440 16
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-1.
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2009.061 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.004017] Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.12 BogoMIPS (lpj=8036244)
[    0.004022] pid_max: default: 32768 minimum: 301
[    0.004030] ACPI: Core revision 20150619
[    0.015677] ACPI: All ACPI Tables successfully acquired
[    0.015710] Security Framework initialized
[    0.015726] AppArmor: AppArmor initialized
[    0.015728] Yama: becoming mindful.
[    0.016021] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.017205] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.017817] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.017824] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.018158] Initializing cgroup subsys blkio
[    0.018164] Initializing cgroup subsys memory
[    0.018178] Initializing cgroup subsys devices
[    0.018182] Initializing cgroup subsys freezer
[    0.018186] Initializing cgroup subsys net_cls
[    0.018190] Initializing cgroup subsys perf_event
[    0.018194] Initializing cgroup subsys net_prio
[    0.018198] Initializing cgroup subsys hugetlb
[    0.018224] CPU: Physical Processor ID: 0
[    0.018226] CPU: Processor Core ID: 0
[    0.018229] mce: CPU supports 5 MCE banks
[    0.018239] LVT offset 0 assigned for vector 0xf9
[    0.018243] process: using AMD E400 aware idle routine
[    0.018246] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.018248] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.018549] Freeing SMP alternatives memory: 28K (ffffffff820a5000 - ffffffff820ac000)
[    0.024008] ftrace: allocating 30947 entries in 121 pages
[    0.040650] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080000] smpboot: CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (fam: 0f, model: 68, stepping: 02)
[    0.080000] Performance Events: AMD PMU driver.
[    0.080000] ... version:                0
[    0.080000] ... bit width:              48
[    0.080000] ... generic registers:      4
[    0.080000] ... value mask:             0000ffffffffffff
[    0.080000] ... max period:             00007fffffffffff
[    0.080000] ... fixed-purpose events:   0
[    0.080000] ... event mask:             000000000000000f
[    0.080000] x86: Booting SMP configuration:
[    0.080000] .... node  #0, CPUs:      #1
[    0.080280] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.008000] process: System has AMD C1E enabled
[    0.156044] process: Switch to broadcast mode on CPU1
[    0.156053] x86: Booted up 1 node, 2 CPUs
[    0.156056] smpboot: Total of 2 processors activated (8036.33 BogoMIPS)
[    0.156658] process: Switch to broadcast mode on CPU0
[    0.156658] devtmpfs: initialized
[    0.162341] evm: security.selinux
[    0.162343] evm: security.SMACK64
[    0.162345] evm: security.SMACK64EXEC
[    0.162346] evm: security.SMACK64TRANSMUTE
[    0.162347] evm: security.SMACK64MMAP
[    0.162348] evm: security.ima
[    0.162350] evm: security.capability
[    0.162403] PM: Registering ACPI NVS region [mem 0x7ff6e000-0x7ff6efff] (4096 bytes)
[    0.162403] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.162403] pinctrl core: initialized pinctrl subsystem
[    0.162403] RTC time: 19:00:17, date: 04/21/16
[    0.162403] NET: Registered protocol family 16
[    0.168009] cpuidle: using governor ladder
[    0.176009] cpuidle: using governor menu
[    0.176010] node 0 link 0: io port [1000, fffff]
[    0.176014] TOM: 0000000080000000 aka 2048M
[    0.176017] node 0 link 0: mmio [a0000, bffff]
[    0.176021] node 0 link 0: mmio [80000000, dfffffff]
[    0.176023] node 0 link 0: mmio [e0000000, efffffff]
[    0.176025] node 0 link 0: mmio [f0000000, fe0bffff]
[    0.176028] bus: [bus 00-ff] on node 0 link 0
[    0.176030] bus: 00 [io  0x0000-0xffff]
[    0.176033] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.176034] bus: 00 [mem 0x80000000-0xfcffffffff]
[    0.176094] Simple Boot Flag at 0x36 set to 0x80
[    0.176152] ACPI: bus type PCI registered
[    0.176155] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.176268] PCI: MMCONFIG for domain 0000 [bus 00-08] at [mem 0xe0000000-0xe08fffff] (base 0xe0000000)
[    0.176272] PCI: MMCONFIG at [mem 0xe0000000-0xe08fffff] reserved in E820
[    0.176287] PCI: Using configuration type 1 for base access
[    0.176502] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.176504] mtrr: probably your BIOS does not setup all CPUs.
[    0.176505] mtrr: corrected configuration.
[    0.180155] ACPI: Added _OSI(Module Device)
[    0.180158] ACPI: Added _OSI(Processor Device)
[    0.180160] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.180162] ACPI: Added _OSI(Processor Aggregator Device)
[    0.183280] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.184408] ACPI : EC: EC started
[    0.184476] ACPI: Interpreter enabled
[    0.184485] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    0.184491] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.184509] ACPI: (supports S0 S3 S4 S5)
[    0.184512] ACPI: Using IOAPIC for interrupt routing
[    0.184546] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.192342] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.192353] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.192361] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.192431] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cd1ff])
[    0.192436] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-08] only partially covers this bridge
[    0.192650] PCI host bridge to bus 0000:00
[    0.192654] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.192658] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.192660] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.192663] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.192667] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.192669] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.192673] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.192675] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.192679] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.192681] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.192685] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.192687] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.192690] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.192693] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.192696] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.192699] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.192702] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.192705] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.192725] pci 0000:00:00.0: [10de:0444] type 00 class 0x050000
[    0.192967] pci 0000:00:01.0: [10de:0442] type 00 class 0x060100
[    0.192976] pci 0000:00:01.0: reg 0x10: [io  0x1d00-0x1dff]
[    0.193099] pci 0000:00:01.1: [10de:0446] type 00 class 0x0c0500
[    0.193111] pci 0000:00:01.1: reg 0x10: [io  0x3080-0x30bf]
[    0.193127] pci 0000:00:01.1: reg 0x20: [io  0x3040-0x307f]
[    0.193134] pci 0000:00:01.1: reg 0x24: [io  0x3000-0x303f]
[    0.193161] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.193275] pci 0000:00:01.3: [10de:0447] type 00 class 0x0b4000
[    0.193293] pci 0000:00:01.3: reg 0x10: [mem 0xf2200000-0xf227ffff]
[    0.193481] pci 0000:00:02.0: [10de:0454] type 00 class 0x0c0310
[    0.193492] pci 0000:00:02.0: reg 0x10: [mem 0xf2486000-0xf2486fff]
[    0.193530] pci 0000:00:02.0: supports D1 D2
[    0.193533] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.193639] pci 0000:00:02.1: [10de:0455] type 00 class 0x0c0320
[    0.193651] pci 0000:00:02.1: reg 0x10: [mem 0xf2488000-0xf24880ff]
[    0.193693] pci 0000:00:02.1: supports D1 D2
[    0.193696] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.193812] pci 0000:00:06.0: [10de:0450] type 00 class 0x020000
[    0.193821] pci 0000:00:06.0: reg 0x10: [mem 0xf2487000-0xf2487fff]
[    0.193827] pci 0000:00:06.0: reg 0x14: [io  0x30e0-0x30e7]
[    0.193859] pci 0000:00:06.0: supports D1 D2
[    0.193861] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.193944] pci 0000:00:06.0: System wakeup disabled by ACPI
[    0.194005] pci 0000:00:07.0: [10de:044a] type 00 class 0x040300
[    0.194017] pci 0000:00:07.0: reg 0x10: [mem 0xf2480000-0xf2483fff]
[    0.194061] pci 0000:00:07.0: PME# supported from D3hot D3cold
[    0.194176] pci 0000:00:08.0: [10de:0449] type 01 class 0x060401
[    0.194254] pci 0000:00:08.0: System wakeup disabled by ACPI
[    0.194315] pci 0000:00:09.0: [10de:0448] type 00 class 0x01018a
[    0.194339] pci 0000:00:09.0: reg 0x20: [io  0x30c0-0x30cf]
[    0.194351] pci 0000:00:09.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.194353] pci 0000:00:09.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.194356] pci 0000:00:09.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.194359] pci 0000:00:09.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.194466] pci 0000:00:0a.0: [10de:045d] type 00 class 0x010185
[    0.194474] pci 0000:00:0a.0: reg 0x10: [io  0x30f8-0x30ff]
[    0.194480] pci 0000:00:0a.0: reg 0x14: [io  0x30ec-0x30ef]
[    0.194485] pci 0000:00:0a.0: reg 0x18: [io  0x30f0-0x30f7]
[    0.194490] pci 0000:00:0a.0: reg 0x1c: [io  0x30e8-0x30eb]
[    0.194496] pci 0000:00:0a.0: reg 0x20: [io  0x30d0-0x30df]
[    0.194501] pci 0000:00:0a.0: reg 0x24: [mem 0xf2484000-0xf2485fff]
[    0.194620] pci 0000:00:0b.0: [10de:045b] type 01 class 0x060400
[    0.194653] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.194704] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.194767] pci 0000:00:0c.0: [10de:045a] type 01 class 0x060400
[    0.194798] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.194907] pci 0000:00:0d.0: [10de:0458] type 01 class 0x060400
[    0.194938] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195049] pci 0000:00:0e.0: [10de:0459] type 01 class 0x060400
[    0.195080] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195193] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.195295] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.195402] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.195500] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.195658] pci 0000:07:05.0: [1180:0832] type 00 class 0x0c0010
[    0.195668] pci 0000:07:05.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.195670] pci 0000:07:05.0: MMC cards are now supported by standard SDHCI controller
[    0.195681] pci 0000:07:05.0: reg 0x10: [mem 0xf2100000-0xf21007ff]
[    0.196012] pci 0000:07:05.0: supports D1 D2
[    0.196015] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196082] pci 0000:07:05.1: [1180:0822] type 00 class 0x080500
[    0.196095] pci 0000:07:05.1: reg 0x10: [mem 0xf2100800-0xf21008ff]
[    0.196151] pci 0000:07:05.1: supports D1 D2
[    0.196154] pci 0000:07:05.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196219] pci 0000:07:05.2: [1180:0592] type 00 class 0x088000
[    0.196232] pci 0000:07:05.2: reg 0x10: [mem 0xf2101000-0xf21010ff]
[    0.196287] pci 0000:07:05.2: supports D1 D2
[    0.196290] pci 0000:07:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196355] pci 0000:07:05.3: [1180:0852] type 00 class 0x088000
[    0.196369] pci 0000:07:05.3: reg 0x10: [mem 0xf2101400-0xf21014ff]
[    0.196423] pci 0000:07:05.3: supports D1 D2
[    0.196426] pci 0000:07:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196512] pci 0000:00:08.0: PCI bridge to [bus 07] (subtractive decode)
[    0.196517] pci 0000:00:08.0:   bridge window [mem 0xf2100000-0xf21fffff]
[    0.196522] pci 0000:00:08.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.196525] pci 0000:00:08.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.196528] pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.196531] pci 0000:00:08.0:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[    0.196534] pci 0000:00:08.0:   bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[    0.196538] pci 0000:00:08.0:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[    0.196541] pci 0000:00:08.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.196543] pci 0000:00:08.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.196547] pci 0000:00:08.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.196550] pci 0000:00:08.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.196553] pci 0000:00:08.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.196556] pci 0000:00:08.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.196559] pci 0000:00:08.0:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[    0.196562] pci 0000:00:08.0:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[    0.196565] pci 0000:00:08.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.196568] pci 0000:00:08.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.196571] pci 0000:00:08.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.196640] acpiphp: Slot [1] registered
[    0.196647] pci 0000:00:0b.0: PCI bridge to [bus 01]
[    0.196711] pci 0000:03:00.0: [168c:001c] type 00 class 0x020000
[    0.196730] pci 0000:03:00.0: reg 0x10: [mem 0xf2000000-0xf200ffff 64bit]
[    0.196877] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.196885] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.196890] pci 0000:00:0c.0:   bridge window [mem 0xf2000000-0xf20fffff]
[    0.196961] pci 0000:05:00.0: [10de:0427] type 00 class 0x030000
[    0.196981] pci 0000:05:00.0: reg 0x10: [mem 0xce000000-0xceffffff]
[    0.196999] pci 0000:05:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.197017] pci 0000:05:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit]
[    0.197030] pci 0000:05:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.197043] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.200020] pci 0000:00:0d.0: PCI bridge to [bus 05]
[    0.200025] pci 0000:00:0d.0:   bridge window [io  0x4000-0x4fff]
[    0.200028] pci 0000:00:0d.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.200033] pci 0000:00:0d.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.200109] acpiphp: Slot [1-1] registered
[    0.200116] pci 0000:00:0e.0: PCI bridge to [bus 09]
[    0.200120] pci 0000:00:0e.0:   bridge window [io  0x5000-0x5fff]
[    0.200124] pci 0000:00:0e.0:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.200129] pci 0000:00:0e.0:   bridge window [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.200146] pci_bus 0000:00: on NUMA node 0
[    0.200774] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *15
[    0.200880] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *10
[    0.200981] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
[    0.201083] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
[    0.201184] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *11
[    0.201286] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[    0.201386] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
[    0.201488] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *15
[    0.201589] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
[    0.201689] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
[    0.201793] ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7
[    0.201895] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
[    0.202000] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *11
[    0.202106] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
[    0.202209] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5
[    0.202314] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *0, disabled.
[    0.202836] ACPI: Enabled 4 GPEs in block 00 to 1F
[    0.202897] ACPI : EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.204032] vgaarb: setting as boot device: PCI:0000:05:00.0
[    0.204032] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.204032] vgaarb: loaded
[    0.204032] vgaarb: bridge control possible 0000:05:00.0
[    0.204427] SCSI subsystem initialized
[    0.204461] libata version 3.00 loaded.
[    0.204461] ACPI: bus type USB registered
[    0.204461] usbcore: registered new interface driver usbfs
[    0.204461] usbcore: registered new interface driver hub
[    0.204461] usbcore: registered new device driver usb
[    0.204461] PCI: Using ACPI for IRQ routing
[    0.208103] PCI: pci_cache_line_size set to 64 bytes
[    0.208170] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.208173] e820: reserve RAM buffer [mem 0x7ff60000-0x7fffffff]
[    0.208357] NetLabel: Initializing
[    0.208358] NetLabel:  domain hash size = 128
[    0.208360] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.208377] NetLabel:  unlabeled traffic allowed by default
[    0.208416] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.208416] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.208416] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.210116] clocksource: Switched to clocksource hpet
[    0.219515] AppArmor: AppArmor Filesystem Enabled
[    0.219639] pnp: PnP ACPI init
[    0.220265] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.220271] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.220353] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20150619/dsopcode-236)
[    0.220360] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node ffff88007d0a5460), AE_AML_BUFFER_LIMIT (20150619/psparse-536)
[    0.220373] ACPI Error: Method execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node ffff88007d0a5460), AE_AML_BUFFER_LIMIT (20150619/uteval-103)
[    0.220380] pnp 00:01: can't evaluate _CRS: 12298
[    0.220434] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.220513] system 00:02: [io  0x0360-0x0361] has been reserved
[    0.220516] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.220520] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.220580] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.220633] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.220686] pnp 00:05: Plug and Play ACPI device, IDs SYN013b SYN0100 SYN0002 PNP0f13 (active)
[    0.221126] system 00:06: [mem 0xffc00000-0xffffffff] could not be reserved
[    0.221130] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.221133] system 00:06: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.221137] system 00:06: [mem 0xfec80000-0xfec80fff] has been reserved
[    0.221140] system 00:06: [mem 0xfef00000-0xfef00fff] has been reserved
[    0.221145] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.221244] pnp: PnP ACPI: found 7 devices
[    0.229739] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.229780] pci 0000:00:08.0: PCI bridge to [bus 07]
[    0.229786] pci 0000:00:08.0:   bridge window [mem 0xf2100000-0xf21fffff]
[    0.229792] pci 0000:00:0b.0: PCI bridge to [bus 01]
[    0.229798] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.229802] pci 0000:00:0c.0:   bridge window [mem 0xf2000000-0xf20fffff]
[    0.229811] pci 0000:05:00.0: BAR 6: no space for [mem size 0x00020000 pref]
[    0.229815] pci 0000:05:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
[    0.229818] pci 0000:00:0d.0: PCI bridge to [bus 05]
[    0.229821] pci 0000:00:0d.0:   bridge window [io  0x4000-0x4fff]
[    0.229825] pci 0000:00:0d.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.229828] pci 0000:00:0d.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.229833] pci 0000:00:0e.0: PCI bridge to [bus 09]
[    0.229836] pci 0000:00:0e.0:   bridge window [io  0x5000-0x5fff]
[    0.229839] pci 0000:00:0e.0:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.229843] pci 0000:00:0e.0:   bridge window [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.229848] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.229851] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.229854] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.229857] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.229860] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.229863] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.229866] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.229870] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.229872] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.229875] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.229878] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.229881] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.229884] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.229888] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.229891] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.229894] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window]
[    0.229897] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff window]
[    0.229901] pci_bus 0000:07: resource 1 [mem 0xf2100000-0xf21fffff]
[    0.229904] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.229907] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.229910] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.229913] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.229917] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.229920] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.229923] pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.229927] pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.229930] pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.229933] pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.229937] pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.229940] pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.229943] pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.229946] pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff window]
[    0.229950] pci_bus 0000:07: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.229953] pci_bus 0000:07: resource 19 [mem 0xfed40000-0xfed44fff window]
[    0.229956] pci_bus 0000:07: resource 20 [mem 0x80000000-0xfebfffff window]
[    0.229960] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
[    0.229963] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.229966] pci_bus 0000:05: resource 1 [mem 0xcc000000-0xceffffff]
[    0.229969] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.229972] pci_bus 0000:09: resource 0 [io  0x5000-0x5fff]
[    0.229975] pci_bus 0000:09: resource 1 [mem 0xf0000000-0xf1ffffff]
[    0.229978] pci_bus 0000:09: resource 2 [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.230031] NET: Registered protocol family 2
[    0.230277] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.230381] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.230513] TCP: Hash tables configured (established 16384 bind 16384)
[    0.230595] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.230621] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.230728] NET: Registered protocol family 1
[    0.231039] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
[    0.284281] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17
[    0.284372] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284420] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284481] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284537] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284596] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284658] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.284693] pci 0000:05:00.0: Video device with shadowed ROM
[    0.284697] PCI: CLS 64 bytes, default 64
[    0.284801] Trying to unpack rootfs image as initramfs...
[    1.070703] Freeing initrd memory: 32320K (ffff8800340d0000 - ffff880036060000)
[    1.071128] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cf59dba2ac, max_idle_ns: 440795228842 ns
[    1.071159] microcode: AMD CPU family 0xf not supported
[    1.071365] Scanning for low memory corruption every 60 seconds
[    1.071835] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.071859] Initialise system trusted keyring
[    1.071891] audit: initializing netlink subsys (disabled)
[    1.071920] audit: type=2000 audit(1461265217.068:1): initialized
[    1.072462] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.075449] zpool: loaded
[    1.075452] zbud: loaded
[    1.075772] VFS: Disk quotas dquot_6.6.0
[    1.075835] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.076804] fuse init (API version 7.23)
[    1.077065] Key type big_key registered
[    1.077780] Key type asymmetric registered
[    1.077784] Asymmetric key parser 'x509' registered
[    1.077811] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.077873] io scheduler noop registered
[    1.077877] io scheduler deadline registered (default)
[    1.077940] io scheduler cfq registered
[    1.078389] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.078401] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.078457] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[    1.078459] vesafb: scrolling: redraw
[    1.078461] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.078485] vesafb: framebuffer at 0xcd000000, mapped to 0xffffc90000400000, using 4032k, total 4032k
[    1.100400] Console: switching to colour frame buffer device 160x50
[    1.120951] fb0: VESA VGA frame buffer device
[    1.121562] ACPI: AC Adapter [ACAD] (on-line)
[    1.121695] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.121940] ACPI: Lid Switch [LID]
[    1.122017] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.122022] ACPI: Power Button [PWRB]
[    1.122082] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.122086] ACPI: Sleep Button [SLPB]
[    1.122148] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.122151] ACPI: Power Button [PWRF]
[    1.122232] ACPI: processor limited to max C-state 1
[    1.122807] [Firmware Bug]: Invalid critical threshold (0)
[    1.123502] thermal LNXTHERM:00: registered as thermal_zone0
[    1.123505] ACPI: Thermal Zone [THRM] (65 C)
[    1.123572] GHES: HEST is not enabled!
[    1.123785] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.127206] Linux agpgart interface v0.103
[    1.130644] brd: module loaded
[    1.132438] loop: module loaded
[    1.132953] libphy: Fixed MDIO Bus: probed
[    1.132958] tun: Universal TUN/TAP device driver, 1.6
[    1.132960] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.133041] PPP generic driver version 2.4.2
[    1.133171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.133180] ehci-pci: EHCI PCI platform driver
[    1.133295] ehci-pci 0000:00:02.1: EHCI Host Controller
[    1.133306] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.133318] ehci-pci 0000:00:02.1: debug port 1
[    1.133354] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    1.133380] ehci-pci 0000:00:02.1: irq 17, io mem 0xf2488000
[    1.148035] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.148109] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.148112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.148115] usb usb1: Product: EHCI Host Controller
[    1.148118] usb usb1: Manufacturer: Linux 4.2.0-35-generic ehci_hcd
[    1.148121] usb usb1: SerialNumber: 0000:00:02.1
[    1.148333] hub 1-0:1.0: USB hub found
[    1.148343] hub 1-0:1.0: 10 ports detected
[    1.148706] ehci-platform: EHCI generic platform driver
[    1.148735] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.148742] ohci-pci: OHCI PCI platform driver
[    1.148835] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    1.148844] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.148884] ohci-pci 0000:00:02.0: irq 18, io mem 0xf2486000
[    1.206072] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.206075] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.206078] usb usb2: Product: OHCI PCI host controller
[    1.206080] usb usb2: Manufacturer: Linux 4.2.0-35-generic ohci_hcd
[    1.206083] usb usb2: SerialNumber: 0000:00:02.0
[    1.206268] hub 2-0:1.0: USB hub found
[    1.206279] hub 2-0:1.0: 10 ports detected
[    1.206785] ohci-platform: OHCI generic platform driver
[    1.206808] uhci_hcd: USB Universal Host Controller Interface driver
[    1.206909] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.230342] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.230348] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.230593] mousedev: PS/2 mouse device common for all mice
[    1.231982] rtc_cmos 00:03: RTC can wake from S4
[    1.232191] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.232234] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.232247] i2c /dev entries driver
[    1.232396] device-mapper: uevent: version 1.0.3
[    1.232522] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    1.232553] ledtrig-cpu: registered to indicate activity on CPUs
[    1.232754] PCCT header not found.
[    1.233131] NET: Registered protocol family 10
[    1.233416] NET: Registered protocol family 17
[    1.233435] Key type dns_resolver registered
[    1.233979] Loading compiled-in X.509 certificates
[    1.235424] Loaded X.509 cert 'Build time autogenerated kernel key: d2cd13f45fa3b012fc89b8d500f91dcca4d9e0a8'
[    1.235451] registered taskstats version 1
[    1.235478] zswap: loading zswap
[    1.235481] zswap: using zbud pool
[    1.235490] zswap: using lzo compressor
[    1.239291] Key type trusted registered
[    1.246384] Key type encrypted registered
[    1.246398] AppArmor: AppArmor sha1 policy hashing enabled
[    1.246403] ima: No TPM chip found, activating TPM-bypass!
[    1.246446] evm: HMAC attrs: 0x1
[    1.246825]   Magic number: 12:542:41
[    1.246843] bdi 7:6: hash matches
[    1.246970] rtc_cmos 00:03: setting system clock to 2016-04-21 19:00:18 UTC (1461265218)
[    1.247235] powernow_k8: fid 0xc (2000 MHz), vid 0x12
[    1.247237] powernow_k8: fid 0xa (1800 MHz), vid 0x13
[    1.247239] powernow_k8: fid 0x8 (1600 MHz), vid 0x14
[    1.247240] powernow_k8: fid 0x0 (800 MHz), vid 0x1e
[    1.247274] powernow_k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 (2 cpu cores) (version 2.20.00)
[    1.247290] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.247291] EDD information not available.
[    1.247385] PM: Hibernation image not present or could not be loaded.
[    1.254858] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.392351] ACPI: Battery Slot [BAT0] (battery present)
[    1.393350] Freeing unused kernel memory: 1464K (ffffffff81f37000 - ffffffff820a5000)
[    1.393356] Write protecting the kernel read-only data: 14336k
[    1.394796] Freeing unused kernel memory: 2044K (ffff880001801000 - ffff880001a00000)
[    1.395040] Freeing unused kernel memory: 292K (ffff880001db7000 - ffff880001e00000)
[    1.416866] random: systemd-udevd urandom read with 8 bits of entropy available
[    1.479901] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.485939] acpi device:26: registered as cooling_device2
[    1.486039] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/LNXVIDEO:01/input/input6
[    1.502983] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.503237] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[    1.508638] sdhci: Secure Digital Host Controller Interface driver
[    1.508645] sdhci: Copyright(c) Pierre Ossman
[    1.510816] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 22)
[    1.511046] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
[    1.512074] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.512084] sdhci-pci 0000:07:05.1: No vmmc regulator found
[    1.512086] sdhci-pci 0000:07:05.1: No vqmmc regulator found
[    1.513085] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.514250] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.515260] mmc0: SDHCI controller on PCI [0000:07:05.1] using DMA
[    1.517518] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
[    1.572068] firewire_ohci 0000:07:05.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.028957] forcedeth 0000:00:06.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:0b:b6:7a
[    2.028964] forcedeth 0000:00:06.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    2.029134] pata_amd 0000:00:09.0: version 0.4.1
[    2.030855] forcedeth 0000:00:06.0 enp0s6: renamed from eth0
[    2.031057] scsi host0: pata_amd
[    2.031246] scsi host1: pata_amd
[    2.031312] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[    2.031315] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[    2.031381] ahci 0000:00:0a.0: version 3.0
[    2.031621] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
[    2.031667] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[    2.031729] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    2.031733] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led clo pio ccc 
[    2.033014] scsi host2: ahci
[    2.033196] scsi host3: ahci
[    2.033325] scsi host4: ahci
[    2.033443] scsi host5: ahci
[    2.033518] ata3: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484100 irq 23
[    2.033521] ata4: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484180 irq 23
[    2.033524] ata5: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484200 irq 23
[    2.033527] ata6: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484280 irq 23
[    2.072180] firewire_core 0000:07:05.0: created device fw0: GUID 00241b004359ae00, S400
[    2.212311] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2
[    2.212321] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
[    2.244253] ata1.00: configured for MWDMA2
[    2.247382] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632N  0503 PQ: 0 ANSI: 5
[    2.269540] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.269544] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.269733] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.269860] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.269975] ata2: port disabled--ignoring
[    2.352029] ata5: SATA link down (SStatus 0 SControl 300)
[    2.352052] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.352118] ata6: SATA link down (SStatus 0 SControl 300)
[    2.352135] ata4: SATA link down (SStatus 0 SControl 300)
[    2.354485] ata3.00: ATA-8: SAMSUNG HM160HI, HH100-10, max UDMA/100
[    2.354488] ata3.00: 312581808 sectors, multi 16: LBA48 
[    2.356994] ata3.00: configured for UDMA/100
[    2.357108] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HM160HI  0-10 PQ: 0 ANSI: 5
[    2.357398] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.357476] sd 2:0:0:0: [sda] Write Protect is off
[    2.357479] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.357507] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.357614] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.400734]  sda: sda1 sda2 < sda5 >
[    2.401175] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.572427] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0/0x0, board id: 0, fw id: 300495
[    2.652984] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   36.976031] usb 2-4: new full-speed USB device number 18 using ohci-pci
[   37.160027] usb 2-4: device descriptor read/64, error -62
[   37.444026] usb 2-4: device descriptor read/64, error -62
[   37.724026] usb 2-4: new full-speed USB device number 19 using ohci-pci
[   37.908027] usb 2-4: device descriptor read/64, error -62
[   38.192027] usb 2-4: device descriptor read/64, error -62
[   38.472027] usb 2-4: new full-speed USB device number 20 using ohci-pci
[   38.880032] usb 2-4: device not accepting address 20, error -62
[   41.288027] usb 2-4: new full-speed USB device number 30 using ohci-pci
[   41.472026] usb 2-4: device descriptor read/64, error -62
[   41.756027] usb 2-4: device descriptor read/64, error -62
[   43.276027] usb 2-4: new full-speed USB device number 36 using ohci-pci
[   43.460026] usb 2-4: device descriptor read/64, error -62
[   43.744026] usb 2-4: device descriptor read/64, error -62
[   72.136024] random: nonblocking pool is initialized
[  126.882759] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[  158.352032] usb 2-4: new full-speed USB device number 120 using ohci-pci
[  158.918581] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[  159.079559] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[  159.079814] systemd[1]: Detected architecture x86-64.
[  159.094853] systemd[1]: Set hostname to <maryxaviere-HP-Pavilion-dv6700-Notebook-PC>.
[  159.776032] usb 2-4: new full-speed USB device number 125 using ohci-pci
[  160.343118] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  160.343177] systemd[1]: Reached target User and Group Name Lookups.
[  160.343199] systemd[1]: Reached target Remote File Systems (Pre).
[  160.343257] systemd[1]: Created slice Root Slice.
[  160.343353] systemd[1]: Listening on udev Kernel Socket.
[  160.343440] systemd[1]: Listening on Journal Socket.
[  160.343472] systemd[1]: Reached target Encrypted Volumes.
[  160.343642] systemd[1]: Created slice System Slice.
[  160.344775] systemd[1]: Starting Remount Root and Kernel File Systems...
[  160.346091] systemd[1]: Started Read required files in advance.
[  160.459457] systemd[1]: Starting Load Kernel Modules...
[  160.460831] systemd[1]: Mounting Debug File System...
[  160.461219] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  160.596513] systemd[1]: Starting Uncomplicated firewall...
[  160.597870] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[  160.598109] systemd[1]: Listening on udev Control Socket.
[  160.599390] systemd[1]: Starting udev Coldplug all Devices...
[  160.600709] systemd[1]: Starting Setup Virtual Console...
[  160.600927] systemd[1]: Created slice User and Session Slice.
[  160.601053] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  160.601270] systemd[1]: Created slice system-getty.slice.
[  160.602507] systemd[1]: Started Braille Device Support.
[  160.603918] systemd[1]: Mounting POSIX Message Queue File System...
[  160.604185] systemd[1]: Listening on Journal Audit Socket.
[  160.604309] systemd[1]: Listening on Journal Socket (/dev/log).
[  160.604369] systemd[1]: Reached target Slices.
[  160.605672] systemd[1]: Starting Increase datagram queue length...
[  160.607046] systemd[1]: Mounting Huge Pages File System...
[  160.747386] systemd[1]: Started Setup Virtual Console.
[  160.891553] systemd[1]: Started Create list of required static device nodes for the current kernel.
[  160.892981] systemd[1]: Starting Create Static Device Nodes in /dev...
[  161.052287] systemd[1]: Started Uncomplicated firewall.
[  161.207533] systemd[1]: Mounted Debug File System.
[  161.207608] systemd[1]: Mounted POSIX Message Queue File System.
[  161.207638] systemd[1]: Mounted Huge Pages File System.
[  161.208374] systemd[1]: Started Increase datagram queue length.
[  161.216887] systemd[1]: Listening on Syslog Socket.
[  161.218233] systemd[1]: Starting Journal Service...
[  161.377667] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[  161.378954] systemd[1]: Started Remount Root and Kernel File Systems.
[  161.503447] lp: driver loaded but no devices found
[  161.573897] systemd[1]: Starting Load/Save Random Seed...
[  161.574945] systemd[1]: Started udev Coldplug all Devices.
[  161.585750] ppdev: user-space parallel port driver
[  161.776758] systemd[1]: Started Load Kernel Modules.
[  161.778120] systemd[1]: Starting Apply Kernel Variables...
[  161.779487] systemd[1]: Mounting FUSE Control File System...
[  161.783203] systemd[1]: Mounted FUSE Control File System.
[  162.161080] systemd[1]: Started Journal Service.
[  162.192037] usb 2-4: new full-speed USB device number 8 using ohci-pci
[  162.333546] systemd-journald[230]: Received request to flush runtime journal from PID 1
[  162.376034] usb 2-4: device descriptor read/64, error -62
[  162.664036] usb 2-4: device descriptor read/64, error -62
[  166.323951] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[  166.324339] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[  166.418247] wmi: Mapper loaded
[  166.641020] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  166.689963] MCE: In-kernel MCE decoding enabled.
[  166.806517] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[  166.807347] r592: driver successfully loaded
[  166.865759] EDAC MC: Ver: 3.0.0
[  166.949667] AMD64 EDAC driver v3.4.0
[  166.949714] EDAC amd64: DRAM ECC disabled.
[  166.949720] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[  167.205677] [drm] Initialized drm 1.1.0 20060810
[  167.734858] input: HP WMI hotkeys as /devices/virtual/input/input8
[  167.771267] r852: Non dma capable device detected, dma disabled
[  167.771286] r852: driver loaded successfully
[  168.267491] kvm: disabled by bios
[  169.144558] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[  169.144590] snd_hda_intel 0000:00:07.0: Disabling MSI
[  169.344609] ath5k 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[  169.344857] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 16
[  169.344965] ath5k 0000:03:00.0: registered as 'phy0'
[  169.668652] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[  169.780044] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[  169.780053] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  169.780057] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[  169.780060] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[  169.780062] snd_hda_codec_conexant hdaudioC0D0:    dig-out=0x1c/0x0
[  169.780064] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[  169.780068] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x17
[  169.859673] ath: EEPROM regdomain: 0x67
[  169.859678] ath: EEPROM indicates we should expect a direct regpair map
[  169.859682] ath: Country alpha2 being used: 00
[  169.859684] ath: Regpair used: 0x67
[  169.920039] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[  169.955264] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[  169.955700] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[  169.959484] ath5k 0000:03:00.0 wlp3s0: renamed from wlan0
[  170.368858] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
[  170.368959] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
[  170.726908] cfg80211: World regulatory domain updated:
[  170.726915] cfg80211:  DFS Master region: unset
[  170.726917] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  170.726921] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  170.726923] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  170.726926] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[  170.726930] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  170.726933] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  170.726935] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[  170.726938] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[  170.726940] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[  172.312036] nvidia: module license 'NVIDIA' taints kernel.
[  172.312043] Disabling lock debugging due to kernel taint
[  172.326459] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[  172.337296] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[  172.337336] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[  172.338050] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:05:00.0 on minor 0
[  172.338063] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.96  Sun Nov  8 22:33:28 PST 2015
[  172.703599] Adding 2095100k swap on /dev/sda5.  Priority:-1 extents:1 across:2095100k FS
[  173.007280] audit: type=1400 audit(1461265390.256:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=436 comm="apparmor_parser"
[  173.007296] audit: type=1400 audit(1461265390.256:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=436 comm="apparmor_parser"
[  173.171145] audit: type=1400 audit(1461265390.420:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=436 comm="apparmor_parser"
[  173.171162] audit: type=1400 audit(1461265390.420:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=436 comm="apparmor_parser"
[  173.171170] audit: type=1400 audit(1461265390.420:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=436 comm="apparmor_parser"
[  173.171178] audit: type=1400 audit(1461265390.420:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=436 comm="apparmor_parser"
[  173.348341] audit: type=1400 audit(1461265390.600:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=436 comm="apparmor_parser"
[  173.348360] audit: type=1400 audit(1461265390.600:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=436 comm="apparmor_parser"
[  173.348368] audit: type=1400 audit(1461265390.600:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=436 comm="apparmor_parser"
[  173.348376] audit: type=1400 audit(1461265390.600:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=436 comm="apparmor_parser"
[  176.588031] usb 2-4: new full-speed USB device number 64 using ohci-pci
[  177.020030] usb 2-4: new full-speed USB device number 65 using ohci-pci
[  177.204031] usb 2-4: device descriptor read/64, error -62
[  177.492040] usb 2-4: device descriptor read/64, error -62
[  177.772033] usb 2-4: new full-speed USB device number 66 using ohci-pci
[  177.956029] usb 2-4: device descriptor read/64, error -62
[  178.240028] usb 2-4: device descriptor read/64, error -62
[  178.520027] usb 2-4: new full-speed USB device number 67 using ohci-pci
[  178.928029] usb 2-4: device not accepting address 67, error -62
[  179.104054] usb 2-4: new full-speed USB device number 68 using ohci-pci
[  179.512030] usb 2-4: device not accepting address 68, error -62
[  179.512171] usb usb2-port4: unable to enumerate USB device
[  180.217188] zram: Added device: zram0
[  180.225876] zram: Added device: zram1
[  180.452755] cgroup: new mount options do not match the existing superblock, will be ignored
[  180.567292] zram0: detected capacity change from 0 to 524328960
[  180.573526] Adding 512036k swap on /dev/zram0.  Priority:5 extents:1 across:512036k SSFS
[  180.576253] zram1: detected capacity change from 0 to 524328960
[  180.582637] Adding 512036k swap on /dev/zram1.  Priority:5 extents:1 across:512036k SSFS
[  182.888349] IPv6: ADDRCONF(NETDEV_UP): enp0s6: link is not ready
[  182.889185] forcedeth 0000:00:06.0 enp0s6: no link during initialization
[  182.889494] IPv6: ADDRCONF(NETDEV_UP): enp0s6: link is not ready
[  182.893845] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  182.903093] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  183.092606] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  184.034948] wlp3s0: authenticate with 40:f2:01:73:fa:4c
[  184.039096] wlp3s0: send auth to 40:f2:01:73:fa:4c (try 1/3)
[  184.042621] wlp3s0: authenticated
[  184.044082] wlp3s0: associate with 40:f2:01:73:fa:4c (try 1/3)
[  184.047104] wlp3s0: RX AssocResp from 40:f2:01:73:fa:4c (capab=0x431 status=0 aid=5)
[  184.047197] wlp3s0: associated
[  184.047253] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[  184.089843] ath: EEPROM regdomain: 0x80fa
[  184.089849] ath: EEPROM indicates we should expect a country code
[  184.089851] ath: doing EEPROM country->regdmn map search
[  184.089853] ath: country maps to regdmn code: 0x37
[  184.089855] ath: Country alpha2 being used: FR
[  184.089857] ath: Regpair used: 0x37
[  184.089859] ath: regdomain 0x80fa dynamically updated by country IE
[  184.089862] cfg80211: Regulatory domain changed to country: FR
[  184.089864] cfg80211:  DFS Master region: ETSI
[  184.089867] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  184.089870] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  184.089872] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  184.089875] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  184.089878] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[  184.089880] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[  186.820026] CE: hpet increased min_delta_ns to 11521 nsec
[  187.537137] NVRM: Your system is not currently configured to drive a VGA console
[  187.537145] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[  187.537149] NVRM: requires the use of a text-mode VGA console. Use of other console
[  187.537151] NVRM: drivers including, but not limited to, vesafb, may result in
[  187.537153] NVRM: corruption and stability problems, and is not supported.

Par contre là Ubuntu a démarré un peu plus lentement.

Dernière modification par paulwoisard (Le 21/04/2016, à 21:13)

Bougron · Le 21/04/2016, à 21:21

Quel périphérique as-tu branché sur le port USB?
Si ce n'est pas avec lui que tu bootes, tu devrais le débrancher.

Comme tu dis, 3 minutes pour booter dont plus d'une minute dans ce creneau

   72.136024] random: nonblocking pool is initialized
[  126.882759] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[  158.352032] usb 2-4: new full-speed USB device number 120 using ohci-pci
[  158.918581] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[  159.079559] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[  159.079814] systemd[1]: Detected architecture x86-64.

A comparer à ce qui pourrait être (disque dur et non SSD)

u1604btrfs@u1604btrfs:~$ dmesg|grep x86-64
[    9.435534] systemd[1]: Detected architecture x86-64.

Pour savoir ce qui est connecté, tu peux faire cette commande

sudo lshw -sanitize

Dernière modification par Bougron (Le 21/04/2016, à 21:45)

paulwoisard · Le 21/04/2016, à 21:26

rien (peut-être la webcam du PC, comment savoir ce qui est connecté en usb sur le PC ?) et la en redémarrant la page du BIOS est réapparu normalement, mais le message sur les ports usb a disparu ce coup ci et Ubuntu a démarré lentement.

D'ailleurs la webcam ne marche pas.

Dernière modification par paulwoisard (Le 21/04/2016, à 21:29)

paulwoisard · Le 22/04/2016, à 18:53

paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~/Téléchargements$ sudo lshw -sanitize
computer                  
    description: Computer
    bits: 64 bits
    fonctionnalités: smbios-2.4 vsyscall32
  *-core
       description: Motherboard
       identifiant matériel: 0
     *-memory:0
          description: Mémoire système
          identifiant matériel: 3
          taille: 1999MiB
     *-cpu
          produit: AMD Turion(tm) 64 X2 Mobile Technology TL-60
          fabriquant: Advanced Micro Devices [AMD]
          identifiant matériel: 4
          information bus: cpu@0
          taille: 2GHz
          capacité: 2GHz
          bits: 64 bits
          fonctionnalités: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp x86-64 3dnowext 3dnow rep_good nopl extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch vmmcall lbrv cpufreq
     *-memory:1 NON-RÉCLAMÉ
          description: RAM memory
          produit: MCP65 Memory Controller
          fabriquant: NVIDIA Corporation
          identifiant matériel: 0
          information bus: pci@0000:00:00.0
          version: a3
          bits: 32 bits
          horloge: 66MHz (15.2ns)
          fonctionnalités: ht bus_master cap_list
          configuration: latency=0
     *-isa
          description: ISA bridge
          produit: MCP65 LPC Bridge
          fabriquant: NVIDIA Corporation
          identifiant matériel: 1
          information bus: pci@0000:00:01.0
          version: a3
          bits: 32 bits
          horloge: 66MHz
          fonctionnalités: isa bus_master
          configuration: latency=0
          ressources: portE/S:1d00(taille=256)
     *-serial
          description: SMBus
          produit: MCP65 SMBus
          fabriquant: NVIDIA Corporation
          identifiant matériel: 1.1
          information bus: pci@0000:00:01.1
          version: a1
          bits: 32 bits
          horloge: 66MHz
          fonctionnalités: pm cap_list
          configuration: driver=nForce2_smbus latency=0
          ressources: irq:10 portE/S:3080(taille=64) portE/S:3040(taille=64) portE/S:3000(taille=64)
     *-processor NON-RÉCLAMÉ
          description: Co-processor
          produit: MCP65 SMU
          fabriquant: NVIDIA Corporation
          identifiant matériel: 1.3
          information bus: pci@0000:00:01.3
          version: a1
          bits: 32 bits
          horloge: 66MHz
          fonctionnalités: bus_master
          configuration: latency=0 maxlatency=1 mingnt=3
          ressources: mémoire:f2200000-f227ffff
     *-usb:0
          description: USB controller
          produit: MCP65 USB 1.1 OHCI Controller
          fabriquant: NVIDIA Corporation
          identifiant matériel: 2
          information bus: pci@0000:00:02.0
          version: a3
          bits: 32 bits
          horloge: 66MHz
          fonctionnalités: pm ohci bus_master cap_list
          configuration: driver=ohci-pci latency=0 maxlatency=1 mingnt=3
          ressources: irq:18 mémoire:f2486000-f2486fff
        *-usbhost
             produit: OHCI PCI host controller
             fabriquant: Linux 4.4.0-21-generic ohci_hcd
             identifiant matériel: 1
             information bus: usb@2
             nom logique: usb2
             version: 4.04
             fonctionnalités: usb-1.10
             configuration: driver=hub slots=10 speed=12Mbit/s
     *-usb:1
          description: USB controller
          produit: MCP65 USB 2.0 EHCI Controller
          fabriquant: NVIDIA Corporation
          identifiant matériel: 2.1
          information bus: pci@0000:00:02.1
          version: a3
          bits: 32 bits
          horloge: 66MHz
          fonctionnalités: debug pm ehci bus_master cap_list
          configuration: driver=ehci-pci latency=0 maxlatency=1 mingnt=3
          ressources: irq:17 mémoire:f2488000-f24880ff
        *-usbhost
             produit: EHCI Host Controller
             fabriquant: Linux 4.4.0-21-generic ehci_hcd
             identifiant matériel: 1
             information bus: usb@1
             nom logique: usb1
             version: 4.04
             fonctionnalités: usb-2.00
             configuration: driver=hub slots=10 speed=480Mbit/s
     *-network
          description: Ethernet interface
          produit: MCP65 Ethernet
          fabriquant: NVIDIA Corporation
          identifiant matériel: 6
          information bus: pci@0000:00:06.0
          nom logique: enp0s6
          version: a3
          numéro de série: [REMOVED]
          capacité: 1Gbit/s
          bits: 32 bits
          horloge: 66MHz
          fonctionnalités: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
          configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 latency=0 link=no maxlatency=20 mingnt=1 multicast=yes port=MII
          ressources: irq:20 mémoire:f2487000-f2487fff portE/S:30e0(taille=8)
     *-multimedia
          description: Audio device
          produit: MCP65 High Definition Audio
          fabriquant: NVIDIA Corporation
          identifiant matériel: 7
          information bus: pci@0000:00:07.0
          version: a1
          bits: 32 bits
          horloge: 66MHz
          fonctionnalités: pm msi ht bus_master cap_list
          configuration: driver=snd_hda_intel latency=0 maxlatency=5 mingnt=2
          ressources: irq:21 mémoire:f2480000-f2483fff
     *-pci:0
          description: PCI bridge
          produit: MCP65 PCI bridge
          fabriquant: NVIDIA Corporation
          identifiant matériel: 8
          information bus: pci@0000:00:08.0
          version: a1
          bits: 32 bits
          horloge: 66MHz
          fonctionnalités: pci ht subtractive_decode bus_master cap_list
          ressources: mémoire:f2100000-f21fffff
        *-firewire
             description: FireWire (IEEE 1394)
             produit: R5C832 IEEE 1394 Controller
             fabriquant: Ricoh Co Ltd
             identifiant matériel: 5
             information bus: pci@0000:07:05.0
             version: 05
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pm ohci bus_master cap_list
             configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=2
             ressources: irq:5 mémoire:f2100000-f21007ff
        *-generic:0
             description: SD Host controller
             produit: R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
             fabriquant: Ricoh Co Ltd
             identifiant matériel: 5.1
             information bus: pci@0000:07:05.1
             version: 22
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pm bus_master cap_list
             configuration: driver=sdhci-pci latency=64
             ressources: irq:7 mémoire:f2100800-f21008ff
        *-generic:1
             description: System peripheral
             produit: R5C592 Memory Stick Bus Host Adapter
             fabriquant: Ricoh Co Ltd
             identifiant matériel: 5.2
             information bus: pci@0000:07:05.2
             version: 12
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pm bus_master cap_list
             configuration: driver=r592 latency=64
             ressources: irq:7 mémoire:f2101000-f21010ff
        *-generic:2
             description: System peripheral
             produit: xD-Picture Card Controller
             fabriquant: Ricoh Co Ltd
             identifiant matériel: 5.3
             information bus: pci@0000:07:05.3
             version: 12
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pm bus_master cap_list
             configuration: driver=r852 latency=64
             ressources: irq:7 mémoire:f2101400-f21014ff
     *-ide:0
          description: IDE interface
          produit: MCP65 IDE
          fabriquant: NVIDIA Corporation
          identifiant matériel: 9
          information bus: pci@0000:00:09.0
          version: a1
          bits: 32 bits
          horloge: 66MHz
          fonctionnalités: ide pm bus_master cap_list
          configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3
          ressources: irq:0 portE/S:1f0(taille=8) portE/S:3f6 portE/S:170(taille=8) portE/S:376 portE/S:30c0(taille=16)
     *-ide:1
          description: IDE interface
          produit: MCP65 SATA Controller
          fabriquant: NVIDIA Corporation
          identifiant matériel: a
          information bus: pci@0000:00:0a.0
          version: a3
          bits: 32 bits
          horloge: 66MHz
          fonctionnalités: ide pm bus_master cap_list
          configuration: driver=ahci latency=0 maxlatency=1 mingnt=3
          ressources: irq:23 portE/S:30f8(taille=8) portE/S:30ec(taille=4) portE/S:30f0(taille=8) portE/S:30e8(taille=4) portE/S:30d0(taille=16) mémoire:f2484000-f2485fff
     *-pci:1
          description: PCI bridge
          produit: MCP65 PCI Express bridge
          fabriquant: NVIDIA Corporation
          identifiant matériel: b
          information bus: pci@0000:00:0b.0
          version: a1
          bits: 32 bits
          horloge: 33MHz
          fonctionnalités: pci pm msi ht pciexpress normal_decode bus_master cap_list
          configuration: driver=pcieport
          ressources: irq:24
     *-pci:2
          description: PCI bridge
          produit: MCP65 PCI Express bridge
          fabriquant: NVIDIA Corporation
          identifiant matériel: c
          information bus: pci@0000:00:0c.0
          version: a1
          bits: 32 bits
          horloge: 33MHz
          fonctionnalités: pci pm msi ht pciexpress normal_decode bus_master cap_list
          configuration: driver=pcieport
          ressources: irq:25 mémoire:f2000000-f20fffff
        *-network
             description: Interface réseau sans fil
             produit: AR242x / AR542x Wireless Network Adapter (PCI-Express)
             fabriquant: Qualcomm Atheros
             identifiant matériel: 0
             information bus: pci@0000:03:00.0
             nom logique: wlp3s0
             version: 01
             numéro de série: [REMOVED]
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
             configuration: broadcast=yes driver=ath5k driverversion=4.4.0-21-generic firmware=N/A ip=[REMOVED] latency=0 link=yes multicast=yes wireless=IEEE 802.11bg
             ressources: irq:16 mémoire:f2000000-f200ffff
     *-pci:3
          description: PCI bridge
          produit: MCP65 PCI Express bridge
          fabriquant: NVIDIA Corporation
          identifiant matériel: d
          information bus: pci@0000:00:0d.0
          version: a1
          bits: 32 bits
          horloge: 33MHz
          fonctionnalités: pci pm msi ht pciexpress normal_decode bus_master cap_list
          configuration: driver=pcieport
          ressources: irq:26 portE/S:4000(taille=4096) mémoire:cc000000-ceffffff portE/S:d0000000(taille=268435456)
        *-display
             description: VGA compatible controller
             produit: G86M [GeForce 8400M GS]
             fabriquant: NVIDIA Corporation
             identifiant matériel: 0
             information bus: pci@0000:05:00.0
             version: a1
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
             configuration: driver=nvidia latency=0
             ressources: irq:28 mémoire:ce000000-ceffffff mémoire:d0000000-dfffffff mémoire:cc000000-cdffffff portE/S:4000(taille=128)
     *-pci:4
          description: PCI bridge
          produit: MCP65 PCI Express bridge
          fabriquant: NVIDIA Corporation
          identifiant matériel: e
          information bus: pci@0000:00:0e.0
          version: a1
          bits: 32 bits
          horloge: 33MHz
          fonctionnalités: pci pm msi ht pciexpress normal_decode bus_master cap_list
          configuration: driver=pcieport
          ressources: irq:27 portE/S:5000(taille=4096) mémoire:f0000000-f1ffffff portE/S:f2600000(taille=2097152)
     *-pci:5
          description: Host bridge
          produit: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 100
          information bus: pci@0000:00:18.0
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-pci:6
          description: Host bridge
          produit: K8 [Athlon64/Opteron] Address Map
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 101
          information bus: pci@0000:00:18.1
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-pci:7
          description: Host bridge
          produit: K8 [Athlon64/Opteron] DRAM Controller
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 102
          information bus: pci@0000:00:18.2
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-pci:8
          description: Host bridge
          produit: K8 [Athlon64/Opteron] Miscellaneous Control
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 103
          information bus: pci@0000:00:18.3
          version: 00
          bits: 32 bits
          horloge: 33MHz
          configuration: driver=k8temp
          ressources: irq:0
     *-scsi:0
          identifiant matériel: 5
          nom logique: scsi0
          fonctionnalités: emulated
        *-cdrom
             description: DVD-RAM writer
             produit: CDDVDW TS-L632N
             fabriquant: TSSTcorp
             identifiant matériel: 0.0.0
             information bus: scsi@0:0.0.0
             nom logique: /dev/cdrom
             nom logique: /dev/cdrw
             nom logique: /dev/dvd
             nom logique: /dev/dvdrw
             nom logique: /dev/sr0
             version: 0503
             fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             configuration: ansiversion=5 status=nodisc
     *-scsi:1
          identifiant matériel: f
          nom logique: scsi2
          fonctionnalités: emulated
        *-disk
             description: ATA Disk
             produit: SAMSUNG HM160HI
             identifiant matériel: 0.0.0
             information bus: scsi@2:0.0.0
             nom logique: /dev/sda
             version: 0-10
             numéro de série: [REMOVED]
             taille: 149GiB (160GB)
             fonctionnalités: partitioned partitioned:dos
             configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=145e69c8
           *-volume:0
                description: Volume EXT4
                fabriquant: Linux
                identifiant matériel: 1
                information bus: scsi@2:0.0.0,1
                nom logique: /dev/sda1
                nom logique: /
                version: 1.0
                numéro de série: [REMOVED]
                taille: 147GiB
                capacité: 147GiB
                fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
                configuration: created=2016-04-10 09:06:31 filesystem=ext4 lastmountpoint=/ modified=2016-04-21 22:18:06 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2016-04-22 17:42:17 state=mounted
           *-volume:1
                description: Extended partition
                identifiant matériel: 2
                information bus: scsi@2:0.0.0,2
                nom logique: /dev/sda2
                taille: 2046MiB
                capacité: 2046MiB
                fonctionnalités: primary extended partitioned partitioned:extended
              *-logicalvolume
                   description: Linux swap / Solaris partition
                   identifiant matériel: 5
                   nom logique: /dev/sda5
                   capacité: 2046MiB
                   fonctionnalités: nofs

paulwoisard · Le 23/04/2016, à 15:55

Bonjour,

J'ai mis à jour le BIOS, il démarre plus vite mais pas Ubuntu et les erreurs par rapport aux ports USB ont disparu lors de la commande dmesg, il y a d'autre truc :

paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-21-generic (buildd@lgw01-21) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #37-Ubuntu SMP Mon Apr 18 18:33:37 UTC 2016 (Ubuntu 4.4.0-21.37-generic 4.4.6)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=fc7186f2-db44-4466-8de1-933590c90406 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] tseg: 007ff80000
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff5ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff60000-0x000000007ff6dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007ff6e000-0x000000007ff6efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ff6f000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv6700 Notebook PC    /30D0, BIOS F.34     03/22/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7ff60 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DEFFF uncachable
[    0.000000]   DF000-DFFFF write-protect
[    0.000000]   E0000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000f8640-0x000f864f] mapped at [ffff8800000f8640]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] BRK [0x021fe000, 0x021fefff] PGTABLE
[    0.000000] BRK [0x021ff000, 0x021fffff] PGTABLE
[    0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33ca6000-0x35e4afff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F8590 000024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 0x000000007FF6428E 00006C (v01 HPQOEM SLIC-MPC 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 0x000000007FF6D8E8 0000F4 (v03 NVIDIA MCP65-E  06040000 PTL_ 000F4240)
[    0.000000] ACPI: DSDT 0x000000007FF642FA 00957A (v01 NVIDIA MCP65    06040000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x000000007FF6EFC0 000040
[    0.000000] ACPI: FACS 0x000000007FF6EFC0 000040
[    0.000000] ACPI: SRAT 0x000000007FF6D9DC 0000A0 (v01 AMD    HAMMER   06040000 AMD  00000001)
[    0.000000] ACPI: WDAT 0x000000007FF6DA7C 000104 (v01 PTLTD  WDATTBL  06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 0x000000007FF6DB80 000206 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
[    0.000000] ACPI: MCFG 0x000000007FF6DD86 00003C (v01 HP       MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: HPET 0x000000007FF6DDC2 000038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
[    0.000000] ACPI: APIC 0x000000007FF6DDFA 000068 (v01 HP     ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 0x000000007FF6DE62 000028 (v01 HP     $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 0x000000007FF6DE8A 000176 (v01 HPQOEM SLIC-MPC 06040000  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x7fffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x7ff5ffff] -> [mem 0x00000000-0x7ff5ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7ff5b000-0x7ff5ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007ff5ffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ff5ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ff5ffff]
[    0.000000] On node 0 totalpages: 524028
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8126 pages used for memmap
[    0.000000]   DMA32 zone: 520032 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88007fc00000 s98008 r8192 d28968 u1048576
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515817
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=fc7186f2-db44-4466-8de1-933590c90406 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x180000000-0x181ffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 2009824K/2096112K available (8356K kernel code, 1278K rwdata, 3920K rodata, 1476K init, 1292K bss, 86288K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:16640 nr_irqs:440 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2009.111 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.22 BogoMIPS (lpj=8036444)
[    0.004020] pid_max: default: 32768 minimum: 301
[    0.004028] ACPI: Core revision 20150930
[    0.014729] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.014764] Security Framework initialized
[    0.014767] Yama: becoming mindful.
[    0.014789] AppArmor: AppArmor initialized
[    0.015040] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.016312] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.016927] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.016934] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.017273] Initializing cgroup subsys io
[    0.017280] Initializing cgroup subsys memory
[    0.017292] Initializing cgroup subsys devices
[    0.017297] Initializing cgroup subsys freezer
[    0.017301] Initializing cgroup subsys net_cls
[    0.017305] Initializing cgroup subsys perf_event
[    0.017310] Initializing cgroup subsys net_prio
[    0.017314] Initializing cgroup subsys hugetlb
[    0.017320] Initializing cgroup subsys pids
[    0.017345] CPU: Physical Processor ID: 0
[    0.017347] CPU: Processor Core ID: 0
[    0.017349] mce: CPU supports 5 MCE banks
[    0.017358] LVT offset 0 assigned for vector 0xf9
[    0.017362] process: using AMD E400 aware idle routine
[    0.017365] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.017367] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.017696] Freeing SMP alternatives memory: 28K (ffffffff820b2000 - ffffffff820b9000)
[    0.020014] ftrace: allocating 31878 entries in 125 pages
[    0.032186] smpboot: Max logical packages: 1
[    0.032191] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.032712] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072000] smpboot: CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (family: 0xf, model: 0x68, stepping: 0x2)
[    0.072000] Performance Events: AMD PMU driver.
[    0.072000] ... version:                0
[    0.072000] ... bit width:              48
[    0.072000] ... generic registers:      4
[    0.072000] ... value mask:             0000ffffffffffff
[    0.072000] ... max period:             00007fffffffffff
[    0.072000] ... fixed-purpose events:   0
[    0.072000] ... event mask:             000000000000000f
[    0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.072000] x86: Booting SMP configuration:
[    0.072000] .... node  #0, CPUs:      #1
[    0.148041] x86: Booted up 1 node, 2 CPUs
[    0.148045] smpboot: Total of 2 processors activated (8036.44 BogoMIPS)
[    0.148106] process: System has AMD C1E enabled
[    0.148106] process: Switch to broadcast mode on CPU1
[    0.148652] process: Switch to broadcast mode on CPU0
[    0.148652] devtmpfs: initialized
[    0.154468] evm: security.selinux
[    0.154470] evm: security.SMACK64
[    0.154471] evm: security.SMACK64EXEC
[    0.154473] evm: security.SMACK64TRANSMUTE
[    0.154474] evm: security.SMACK64MMAP
[    0.154475] evm: security.ima
[    0.154476] evm: security.capability
[    0.154533] PM: Registering ACPI NVS region [mem 0x7ff6e000-0x7ff6efff] (4096 bytes)
[    0.154533] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.154533] pinctrl core: initialized pinctrl subsystem
[    0.154533] RTC time: 14:40:20, date: 04/23/16
[    0.154533] NET: Registered protocol family 16
[    0.168004] cpuidle: using governor ladder
[    0.180005] cpuidle: using governor menu
[    0.180010] PCCT header not found.
[    0.180018] node 0 link 0: io port [1000, fffff]
[    0.180021] TOM: 0000000080000000 aka 2048M
[    0.180024] node 0 link 0: mmio [a0000, bffff]
[    0.180028] node 0 link 0: mmio [80000000, dfffffff]
[    0.180030] node 0 link 0: mmio [e0000000, efffffff]
[    0.180033] node 0 link 0: mmio [f0000000, fe0bffff]
[    0.180035] bus: [bus 00-ff] on node 0 link 0
[    0.180038] bus: 00 [io  0x0000-0xffff]
[    0.180040] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.180042] bus: 00 [mem 0x80000000-0xfcffffffff]
[    0.180107] Simple Boot Flag at 0x36 set to 0x1
[    0.180153] ACPI: bus type PCI registered
[    0.180156] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.180267] PCI: MMCONFIG for domain 0000 [bus 00-08] at [mem 0xe0000000-0xe08fffff] (base 0xe0000000)
[    0.180271] PCI: MMCONFIG at [mem 0xe0000000-0xe08fffff] reserved in E820
[    0.180286] PCI: Using configuration type 1 for base access
[    0.180481] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.180483] mtrr: probably your BIOS does not setup all CPUs.
[    0.180484] mtrr: corrected configuration.
[    0.196146] ACPI: Added _OSI(Module Device)
[    0.196149] ACPI: Added _OSI(Processor Device)
[    0.196151] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.196152] ACPI: Added _OSI(Processor Aggregator Device)
[    0.199312] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.200502] ACPI : EC: EC started
[    0.200574] ACPI: Interpreter enabled
[    0.200583] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.200589] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.200607] ACPI: (supports S0 S3 S4 S5)
[    0.200609] ACPI: Using IOAPIC for interrupt routing
[    0.200640] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.208312] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.208322] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.208330] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.208344] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-08] only partially covers this bridge
[    0.208403] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cd1ff])
[    0.208659] PCI host bridge to bus 0000:00
[    0.208663] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.208667] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.208670] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.208673] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.208676] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.208679] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.208682] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.208685] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.208689] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.208691] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.208695] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.208698] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.208701] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.208704] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.208707] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.208710] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.208713] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.208717] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.208738] pci 0000:00:00.0: [10de:0444] type 00 class 0x050000
[    0.208999] pci 0000:00:01.0: [10de:0442] type 00 class 0x060100
[    0.209009] pci 0000:00:01.0: reg 0x10: [io  0x1d00-0x1dff]
[    0.209144] pci 0000:00:01.1: [10de:0446] type 00 class 0x0c0500
[    0.209160] pci 0000:00:01.1: reg 0x10: [io  0x3080-0x30bf]
[    0.209178] pci 0000:00:01.1: reg 0x20: [io  0x3040-0x307f]
[    0.209184] pci 0000:00:01.1: reg 0x24: [io  0x3000-0x303f]
[    0.209208] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.209335] pci 0000:00:01.3: [10de:0447] type 00 class 0x0b4000
[    0.209357] pci 0000:00:01.3: reg 0x10: [mem 0xf2200000-0xf227ffff]
[    0.209555] pci 0000:00:02.0: [10de:0454] type 00 class 0x0c0310
[    0.209569] pci 0000:00:02.0: reg 0x10: [mem 0xf2486000-0xf2486fff]
[    0.209605] pci 0000:00:02.0: supports D1 D2
[    0.209608] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.209723] pci 0000:00:02.1: [10de:0455] type 00 class 0x0c0320
[    0.209739] pci 0000:00:02.1: reg 0x10: [mem 0xf2488000-0xf24880ff]
[    0.209779] pci 0000:00:02.1: supports D1 D2
[    0.209782] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.209905] pci 0000:00:06.0: [10de:0450] type 00 class 0x020000
[    0.209918] pci 0000:00:06.0: reg 0x10: [mem 0xf2487000-0xf2487fff]
[    0.209924] pci 0000:00:06.0: reg 0x14: [io  0x30e0-0x30e7]
[    0.209953] pci 0000:00:06.0: supports D1 D2
[    0.209956] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.210043] pci 0000:00:06.0: System wakeup disabled by ACPI
[    0.210107] pci 0000:00:07.0: [10de:044a] type 00 class 0x040300
[    0.210124] pci 0000:00:07.0: reg 0x10: [mem 0xf2480000-0xf2483fff]
[    0.210164] pci 0000:00:07.0: PME# supported from D3hot D3cold
[    0.210293] pci 0000:00:08.0: [10de:0449] type 01 class 0x060401
[    0.210379] pci 0000:00:08.0: System wakeup disabled by ACPI
[    0.210441] pci 0000:00:09.0: [10de:0448] type 00 class 0x01018a
[    0.210468] pci 0000:00:09.0: reg 0x20: [io  0x30c0-0x30cf]
[    0.210480] pci 0000:00:09.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.210482] pci 0000:00:09.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.210486] pci 0000:00:09.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.210489] pci 0000:00:09.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.210603] pci 0000:00:0a.0: [10de:045d] type 00 class 0x010185
[    0.210614] pci 0000:00:0a.0: reg 0x10: [io  0x30f8-0x30ff]
[    0.210620] pci 0000:00:0a.0: reg 0x14: [io  0x30ec-0x30ef]
[    0.210625] pci 0000:00:0a.0: reg 0x18: [io  0x30f0-0x30f7]
[    0.210630] pci 0000:00:0a.0: reg 0x1c: [io  0x30e8-0x30eb]
[    0.210636] pci 0000:00:0a.0: reg 0x20: [io  0x30d0-0x30df]
[    0.210642] pci 0000:00:0a.0: reg 0x24: [mem 0xf2484000-0xf2485fff]
[    0.210764] pci 0000:00:0b.0: [10de:045b] type 01 class 0x060400
[    0.210800] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.210860] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.210922] pci 0000:00:0c.0: [10de:045a] type 01 class 0x060400
[    0.210956] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.211068] pci 0000:00:0d.0: [10de:0458] type 01 class 0x060400
[    0.211102] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.211212] pci 0000:00:0e.0: [10de:0459] type 01 class 0x060400
[    0.211246] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.211363] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.211468] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.212056] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.212160] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.212319] pci 0000:07:05.0: [1180:0832] type 00 class 0x0c0010
[    0.212334] pci 0000:07:05.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.212336] pci 0000:07:05.0: MMC cards are now supported by standard SDHCI controller
[    0.212346] pci 0000:07:05.0: reg 0x10: [mem 0x00000000-0x000007ff]
[    0.212391] pci 0000:07:05.0: supports D1 D2
[    0.212394] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.212462] pci 0000:07:05.1: [1180:0822] type 00 class 0x080500
[    0.212480] pci 0000:07:05.1: reg 0x10: [mem 0xf2100800-0xf21008ff]
[    0.212534] pci 0000:07:05.1: supports D1 D2
[    0.212537] pci 0000:07:05.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.212603] pci 0000:07:05.2: [1180:0592] type 00 class 0x088000
[    0.212621] pci 0000:07:05.2: reg 0x10: [mem 0xf2101000-0xf21010ff]
[    0.212675] pci 0000:07:05.2: supports D1 D2
[    0.212678] pci 0000:07:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.212741] pci 0000:07:05.3: [1180:0852] type 00 class 0x088000
[    0.212760] pci 0000:07:05.3: reg 0x10: [mem 0xf2101400-0xf21014ff]
[    0.212812] pci 0000:07:05.3: supports D1 D2
[    0.212815] pci 0000:07:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.212901] pci 0000:00:08.0: PCI bridge to [bus 07] (subtractive decode)
[    0.212906] pci 0000:00:08.0:   bridge window [mem 0xf2100000-0xf21fffff]
[    0.212911] pci 0000:00:08.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.212914] pci 0000:00:08.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.212917] pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.212921] pci 0000:00:08.0:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[    0.212924] pci 0000:00:08.0:   bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[    0.212928] pci 0000:00:08.0:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[    0.212931] pci 0000:00:08.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.212934] pci 0000:00:08.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.212938] pci 0000:00:08.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.212941] pci 0000:00:08.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.212948] pci 0000:00:08.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.212951] pci 0000:00:08.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.212954] pci 0000:00:08.0:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[    0.212958] pci 0000:00:08.0:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[    0.212961] pci 0000:00:08.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.212964] pci 0000:00:08.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.212968] pci 0000:00:08.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.213038] acpiphp: Slot [1] registered
[    0.213045] pci 0000:00:0b.0: PCI bridge to [bus 01]
[    0.213112] pci 0000:03:00.0: [168c:001c] type 00 class 0x020000
[    0.213145] pci 0000:03:00.0: reg 0x10: [mem 0xf2000000-0xf200ffff 64bit]
[    0.213288] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.213297] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.213302] pci 0000:00:0c.0:   bridge window [mem 0xf2000000-0xf20fffff]
[    0.213371] pci 0000:05:00.0: [10de:0427] type 00 class 0x030000
[    0.213405] pci 0000:05:00.0: reg 0x10: [mem 0xce000000-0xceffffff]
[    0.213423] pci 0000:05:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.213441] pci 0000:05:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit]
[    0.213453] pci 0000:05:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.213466] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.220023] pci 0000:00:0d.0: PCI bridge to [bus 05]
[    0.220027] pci 0000:00:0d.0:   bridge window [io  0x4000-0x4fff]
[    0.220031] pci 0000:00:0d.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.220036] pci 0000:00:0d.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.220117] acpiphp: Slot [1-1] registered
[    0.220124] pci 0000:00:0e.0: PCI bridge to [bus 09]
[    0.220129] pci 0000:00:0e.0:   bridge window [io  0x5000-0x5fff]
[    0.220132] pci 0000:00:0e.0:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.220137] pci 0000:00:0e.0:   bridge window [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.220805] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *15
[    0.220914] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *10
[    0.221017] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
[    0.221122] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
[    0.221226] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *11
[    0.221329] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[    0.221433] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
[    0.221536] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *15
[    0.221640] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
[    0.221743] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
[    0.221847] ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7
[    0.221950] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
[    0.222053] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *11
[    0.222156] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
[    0.222262] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5
[    0.222365] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *0, disabled.
[    0.222892] ACPI: Enabled 4 GPEs in block 00 to 1F
[    0.222956] ACPI : EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.223131] vgaarb: setting as boot device: PCI:0000:05:00.0
[    0.223131] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.223131] vgaarb: loaded
[    0.223131] vgaarb: bridge control possible 0000:05:00.0
[    0.223131] SCSI subsystem initialized
[    0.223131] libata version 3.00 loaded.
[    0.223131] ACPI: bus type USB registered
[    0.223131] usbcore: registered new interface driver usbfs
[    0.223131] usbcore: registered new interface driver hub
[    0.223131] usbcore: registered new device driver usb
[    0.224050] PCI: Using ACPI for IRQ routing
[    0.224156] PCI: pci_cache_line_size set to 64 bytes
[    0.224222] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.224225] e820: reserve RAM buffer [mem 0x7ff60000-0x7fffffff]
[    0.224411] NetLabel: Initializing
[    0.224413] NetLabel:  domain hash size = 128
[    0.224415] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.224433] NetLabel:  unlabeled traffic allowed by default
[    0.224470] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.224470] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.224470] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.226121] clocksource: Switched to clocksource hpet
[    0.235860] AppArmor: AppArmor Filesystem Enabled
[    0.235980] pnp: PnP ACPI init
[    0.236629] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.236636] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.236715] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20150930/dsopcode-236)
[    0.236721] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPC0.PMIO._CRS] (Node ffff88007d0a7500), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[    0.236734] ACPI Error: Method execution failed [\_SB.PCI0.LPC0.PMIO._CRS] (Node ffff88007d0a7500), AE_AML_BUFFER_LIMIT (20150930/uteval-103)
[    0.236742] pnp 00:01: can't evaluate _CRS: 12298
[    0.236796] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.236879] system 00:02: [io  0x0360-0x0361] has been reserved
[    0.236883] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.236887] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.236949] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.237005] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.237056] pnp 00:05: Plug and Play ACPI device, IDs SYN013b SYN0100 SYN0002 PNP0f13 (active)
[    0.237536] system 00:06: [mem 0xffc00000-0xffffffff] could not be reserved
[    0.237540] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.237544] system 00:06: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.237547] system 00:06: [mem 0xfec80000-0xfec80fff] has been reserved
[    0.237551] system 00:06: [mem 0xfef00000-0xfef00fff] has been reserved
[    0.237555] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.237661] pnp: PnP ACPI: found 7 devices
[    0.246065] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.246114] pci 0000:07:05.0: BAR 0: assigned [mem 0xf2100000-0xf21007ff]
[    0.246121] pci 0000:00:08.0: PCI bridge to [bus 07]
[    0.246126] pci 0000:00:08.0:   bridge window [mem 0xf2100000-0xf21fffff]
[    0.246132] pci 0000:00:0b.0: PCI bridge to [bus 01]
[    0.246139] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.246143] pci 0000:00:0c.0:   bridge window [mem 0xf2000000-0xf20fffff]
[    0.246150] pci 0000:05:00.0: BAR 6: no space for [mem size 0x00020000 pref]
[    0.246154] pci 0000:05:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
[    0.246157] pci 0000:00:0d.0: PCI bridge to [bus 05]
[    0.246160] pci 0000:00:0d.0:   bridge window [io  0x4000-0x4fff]
[    0.246164] pci 0000:00:0d.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.246167] pci 0000:00:0d.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.246172] pci 0000:00:0e.0: PCI bridge to [bus 09]
[    0.246175] pci 0000:00:0e.0:   bridge window [io  0x5000-0x5fff]
[    0.246179] pci 0000:00:0e.0:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.246183] pci 0000:00:0e.0:   bridge window [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.246190] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.246193] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.246196] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.246199] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.246202] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.246206] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.246208] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.246211] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.246215] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.246218] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.246221] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.246224] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.246227] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.246230] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.246234] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.246237] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window]
[    0.246240] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff window]
[    0.246244] pci_bus 0000:07: resource 1 [mem 0xf2100000-0xf21fffff]
[    0.246247] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.246250] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.246254] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.246257] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.246260] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.246263] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.246266] pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.246270] pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.246273] pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.246276] pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.246280] pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.246283] pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.246287] pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.246290] pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff window]
[    0.246293] pci_bus 0000:07: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.246297] pci_bus 0000:07: resource 19 [mem 0xfed40000-0xfed44fff window]
[    0.246300] pci_bus 0000:07: resource 20 [mem 0x80000000-0xfebfffff window]
[    0.246304] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
[    0.246307] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.246310] pci_bus 0000:05: resource 1 [mem 0xcc000000-0xceffffff]
[    0.246313] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.246317] pci_bus 0000:09: resource 0 [io  0x5000-0x5fff]
[    0.246319] pci_bus 0000:09: resource 1 [mem 0xf0000000-0xf1ffffff]
[    0.246323] pci_bus 0000:09: resource 2 [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.246381] NET: Registered protocol family 2
[    0.246612] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.246712] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.246842] TCP: Hash tables configured (established 16384 bind 16384)
[    0.246926] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.246950] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.247057] NET: Registered protocol family 1
[    0.300141] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.300189] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.300250] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.300306] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.300366] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.300428] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.300465] pci 0000:05:00.0: Video device with shadowed ROM
[    0.300468] PCI: CLS 64 bytes, default 64
[    0.300556] Trying to unpack rootfs image as initramfs...
[    1.137698] Freeing initrd memory: 34452K (ffff880033ca6000 - ffff880035e4b000)
[    1.138051] ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 10
[    1.138255] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 11
[    1.138456] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
[    1.138677] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17
[    1.138882] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[    1.139088] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[    1.139311] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
[    1.139562] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
[    1.139736] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
[    1.139979] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 16
[    1.140191] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[    1.140337] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cf5cd0676e, max_idle_ns: 440795241666 ns
[    1.140415] Scanning for low memory corruption every 60 seconds
[    1.140869] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.140905] audit: initializing netlink subsys (disabled)
[    1.140932] audit: type=2000 audit(1461422420.140:1): initialized
[    1.141368] Initialise system trusted keyring
[    1.141543] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.144232] zbud: loaded
[    1.144561] VFS: Disk quotas dquot_6.6.0
[    1.144620] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.145426] fuse init (API version 7.23)
[    1.145647] Key type big_key registered
[    1.146502] Key type asymmetric registered
[    1.146508] Asymmetric key parser 'x509' registered
[    1.146573] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.146632] io scheduler noop registered
[    1.146637] io scheduler deadline registered (default)
[    1.146688] io scheduler cfq registered
[    1.147138] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.147150] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.147195] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[    1.147197] vesafb: scrolling: redraw
[    1.147200] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.147225] vesafb: framebuffer at 0xcd000000, mapped to 0xffffc90000400000, using 4032k, total 4032k
[    1.168302] Console: switching to colour frame buffer device 160x50
[    1.190746] fb0: VESA VGA frame buffer device
[    1.191311] ACPI: AC Adapter [ACAD] (on-line)
[    1.191416] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.191679] ACPI: Lid Switch [LID]
[    1.191752] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.191757] ACPI: Power Button [PWRB]
[    1.191814] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.191818] ACPI: Sleep Button [SLPB]
[    1.191872] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.191875] ACPI: Power Button [PWRF]
[    1.191921] ACPI: processor limited to max C-state 1
[    1.192514] [Firmware Bug]: Invalid critical threshold (0)
[    1.193169] thermal LNXTHERM:00: registered as thermal_zone0
[    1.193172] ACPI: Thermal Zone [THRM] (62 C)
[    1.193233] GHES: HEST is not enabled!
[    1.193429] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.196489] Linux agpgart interface v0.103
[    1.201254] brd: module loaded
[    1.204130] loop: module loaded
[    1.204732] libphy: Fixed MDIO Bus: probed
[    1.204737] tun: Universal TUN/TAP device driver, 1.6
[    1.204738] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.204812] PPP generic driver version 2.4.2
[    1.204949] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.204960] ehci-pci: EHCI PCI platform driver
[    1.205043] ehci-pci 0000:00:02.1: EHCI Host Controller
[    1.205053] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.205064] ehci-pci 0000:00:02.1: debug port 1
[    1.205103] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    1.205129] ehci-pci 0000:00:02.1: irq 17, io mem 0xf2488000
[    1.220029] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.220105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.220108] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.220111] usb usb1: Product: EHCI Host Controller
[    1.220114] usb usb1: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
[    1.220117] usb usb1: SerialNumber: 0000:00:02.1
[    1.220301] hub 1-0:1.0: USB hub found
[    1.220312] hub 1-0:1.0: 10 ports detected
[    1.220657] ehci-platform: EHCI generic platform driver
[    1.220688] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.220695] ohci-pci: OHCI PCI platform driver
[    1.220770] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    1.220779] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.220820] ohci-pci 0000:00:02.0: irq 18, io mem 0xf2486000
[    1.278069] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.278072] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.278075] usb usb2: Product: OHCI PCI host controller
[    1.278078] usb usb2: Manufacturer: Linux 4.4.0-21-generic ohci_hcd
[    1.278081] usb usb2: SerialNumber: 0000:00:02.0
[    1.278264] hub 2-0:1.0: USB hub found
[    1.278275] hub 2-0:1.0: 10 ports detected
[    1.278806] ohci-platform: OHCI generic platform driver
[    1.278829] uhci_hcd: USB Universal Host Controller Interface driver
[    1.278944] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.302149] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.302155] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.302388] mousedev: PS/2 mouse device common for all mice
[    1.303620] rtc_cmos 00:03: RTC can wake from S4
[    1.303821] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.303865] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.303878] i2c /dev entries driver
[    1.303971] device-mapper: uevent: version 1.0.3
[    1.304103] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.304124] ledtrig-cpu: registered to indicate activity on CPUs
[    1.304768] NET: Registered protocol family 10
[    1.305069] NET: Registered protocol family 17
[    1.305085] Key type dns_resolver registered
[    1.305366] microcode: AMD CPU family 0xf not supported
[    1.305636] registered taskstats version 1
[    1.305661] Loading compiled-in X.509 certificates
[    1.307098] Loaded X.509 cert 'Build time autogenerated kernel key: fc7c0e9f152f32eca50ea2d9722926e5127af244'
[    1.307126] zswap: loaded using pool lzo/zbud
[    1.310593] Key type trusted registered
[    1.317084] Key type encrypted registered
[    1.317099] AppArmor: AppArmor sha1 policy hashing enabled
[    1.317105] ima: No TPM chip found, activating TPM-bypass!
[    1.317139] evm: HMAC attrs: 0x1
[    1.317506]   Magic number: 12:333:688
[    1.317649] rtc_cmos 00:03: setting system clock to 2016-04-23 14:40:21 UTC (1461422421)
[    1.317909] powernow_k8: fid 0xc (2000 MHz), vid 0x12
[    1.317912] powernow_k8: fid 0xa (1800 MHz), vid 0x13
[    1.317913] powernow_k8: fid 0x8 (1600 MHz), vid 0x14
[    1.317915] powernow_k8: fid 0x0 (800 MHz), vid 0x1e
[    1.317964] powernow_k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 (2 cpu cores) (version 2.20.00)
[    1.317975] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.317976] EDD information not available.
[    1.318071] PM: Hibernation image not present or could not be loaded.
[    1.326003] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.460364] ACPI: Battery Slot [BAT0] (battery present)
[    1.463054] Freeing unused kernel memory: 1476K (ffffffff81f41000 - ffffffff820b2000)
[    1.463061] Write protecting the kernel read-only data: 14336k
[    1.464451] Freeing unused kernel memory: 1872K (ffff88000182c000 - ffff880001a00000)
[    1.465277] Freeing unused kernel memory: 176K (ffff880001dd4000 - ffff880001e00000)
[    1.485416] random: systemd-udevd urandom read with 8 bits of entropy available
[    1.546521] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.555847] acpi device:26: registered as cooling_device2
[    1.555948] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/LNXVIDEO:01/input/input6
[    1.558745] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.572428] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.578168] sdhci: Secure Digital Host Controller Interface driver
[    1.578172] sdhci: Copyright(c) Pierre Ossman
[    1.580506] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 22)
[    1.581550] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.581561] sdhci-pci 0000:07:05.1: No vmmc regulator found
[    1.581564] sdhci-pci 0000:07:05.1: No vqmmc regulator found
[    1.582561] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.583755] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.584765] mmc0: SDHCI controller on PCI [0000:07:05.1] using DMA
[    1.587083] firewire_ohci 0000:07:05.0: enabling device (0100 -> 0102)
[    1.640129] firewire_ohci 0000:07:05.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.088967] forcedeth 0000:00:06.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:0b:b6:7a
[    2.088973] forcedeth 0000:00:06.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    2.089163] pata_amd 0000:00:09.0: version 0.4.1
[    2.090061] forcedeth 0000:00:06.0 enp0s6: renamed from eth0
[    2.090740] scsi host0: pata_amd
[    2.090988] scsi host1: pata_amd
[    2.091059] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[    2.091061] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[    2.091174] ahci 0000:00:0a.0: version 3.0
[    2.091215] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[    2.091277] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    2.091282] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led clo pio ccc 
[    2.092306] scsi host2: ahci
[    2.092677] scsi host3: ahci
[    2.093493] scsi host4: ahci
[    2.093725] scsi host5: ahci
[    2.093814] ata3: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484100 irq 23
[    2.093817] ata4: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484180 irq 23
[    2.093819] ata5: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484200 irq 23
[    2.093822] ata6: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484280 irq 23
[    2.140165] firewire_core 0000:07:05.0: created device fw0: GUID 00241b004359ae00, S400
[    2.272368] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2
[    2.272379] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
[    2.304253] ata1.00: configured for MWDMA2
[    2.307432] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632N  0503 PQ: 0 ANSI: 5
[    2.325606] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.325610] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.325816] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.325988] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.326094] ata2: port disabled--ignoring
[    2.412035] ata6: SATA link down (SStatus 0 SControl 300)
[    2.412054] ata5: SATA link down (SStatus 0 SControl 300)
[    2.412068] ata4: SATA link down (SStatus 0 SControl 300)
[    2.412081] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.414512] ata3.00: ATA-8: SAMSUNG HM160HI, HH100-10, max UDMA/100
[    2.414515] ata3.00: 312581808 sectors, multi 16: LBA48 
[    2.417021] ata3.00: configured for UDMA/100
[    2.417244] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HM160HI  0-10 PQ: 0 ANSI: 5
[    2.417615] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.417677] sd 2:0:0:0: [sda] Write Protect is off
[    2.417681] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.417708] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.418031] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.467796]  sda: sda1 sda2 < sda5 >
[    2.468271] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.635474] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0/0x0, board id: 0, fw id: 300495
[    2.714205] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   41.132572] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[   41.132577] EXT4-fs (sda1): write access will be enabled during recovery
[   41.879424] random: nonblocking pool is initialized
[   41.882557] EXT4-fs (sda1): recovery complete
[   41.901561] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   43.440798] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   43.441005] systemd[1]: Detected architecture x86-64.
[   43.452486] systemd[1]: Set hostname to <maryxaviere-HP-Pavilion-dv6700-Notebook-PC>.
[   45.278546] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   45.278609] systemd[1]: Reached target Remote File Systems (Pre).
[   45.278630] systemd[1]: Reached target Remote File Systems.
[   45.278855] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   45.278930] systemd[1]: Listening on Syslog Socket.
[   45.279045] systemd[1]: Listening on Journal Audit Socket.
[   45.279068] systemd[1]: Reached target User and Group Name Lookups.
[   45.279127] systemd[1]: Listening on udev Control Socket.
[   45.279349] systemd[1]: Created slice System Slice.
[   45.279530] systemd[1]: Created slice system-getty.slice.
[   45.279606] systemd[1]: Listening on Journal Socket.
[   45.328254] systemd[1]: Starting Uncomplicated firewall...
[   45.329261] systemd[1]: Mounting Debug File System...
[   45.330429] systemd[1]: Starting Remount Root and Kernel File Systems...
[   45.331561] systemd[1]: Started Read required files in advance.
[   45.333596] systemd[1]: Starting Braille Device Support...
[   45.333734] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   45.333861] systemd[1]: Listening on Journal Socket (/dev/log).
[   45.576286] systemd[1]: Starting Load Kernel Modules...
[   45.577583] systemd[1]: Mounting Huge Pages File System...
[   45.578744] systemd[1]: Mounting POSIX Message Queue File System...
[   45.578817] systemd[1]: Reached target Encrypted Volumes.
[   45.579093] systemd[1]: Created slice User and Session Slice.
[   45.579130] systemd[1]: Reached target Slices.
[   45.580410] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   45.580543] systemd[1]: Listening on udev Kernel Socket.
[   45.582013] systemd[1]: Starting Journal Service...
[   45.797493] systemd[1]: Started Uncomplicated firewall.
[   45.928319] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   45.940332] systemd[1]: Starting Create Static Device Nodes in /dev...
[   46.311446] systemd[1]: Mounted POSIX Message Queue File System.
[   46.312247] systemd[1]: Mounted Debug File System.
[   46.312289] systemd[1]: Mounted Huge Pages File System.
[   46.368065] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   46.369332] systemd[1]: Started Remount Root and Kernel File Systems.
[   46.556284] systemd[1]: Starting udev Coldplug all Devices...
[   46.557537] systemd[1]: Starting Load/Save Random Seed...
[   46.856757] lp: driver loaded but no devices found
[   46.944541] systemd[1]: Started Journal Service.
[   47.016539] ppdev: user-space parallel port driver
[   47.415107] systemd-journald[235]: Received request to flush runtime journal from PID 1
[   51.985105] wmi: Mapper loaded
[   52.896698] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[   52.896814] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[   53.108772] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   53.411692] EDAC MC: Ver: 3.0.0
[   53.453933] MCE: In-kernel MCE decoding enabled.
[   53.604048] AMD64 EDAC driver v3.4.0
[   53.604098] EDAC amd64: DRAM ECC disabled.
[   53.604105] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   53.746780] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   53.753537] r592: driver successfully loaded
[   53.892300] [drm] Initialized drm 1.1.0 20060810
[   54.697031] r852: Non dma capable device detected, dma disabled
[   54.697048] r852: driver loaded successfully
[   55.105693] input: HP WMI hotkeys as /devices/virtual/input/input8
[   55.602002] kvm: disabled by bios
[   55.632806] kvm: disabled by bios
[   55.926516] snd_hda_intel 0000:00:07.0: Disabling MSI
[   56.039205] ath5k 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   56.039831] ath5k 0000:03:00.0: registered as 'phy0'
[   56.542818] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[   56.555059] ath: EEPROM regdomain: 0x67
[   56.555065] ath: EEPROM indicates we should expect a direct regpair map
[   56.555068] ath: Country alpha2 being used: 00
[   56.555070] ath: Regpair used: 0x67
[   56.628043] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[   56.628050] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   56.628054] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   56.628056] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   56.628059] snd_hda_codec_conexant hdaudioC0D0:    dig-out=0x1c/0x0
[   56.628061] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   56.628065] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x17
[   56.764040] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   56.795961] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   56.796507] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   56.798616] ath5k 0000:03:00.0 wlp3s0: renamed from wlan0
[   57.140850] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
[   57.140972] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
[   58.018093] Adding 2095100k swap on /dev/sda5.  Priority:-1 extents:1 across:2095100k FS
[   58.371947] cfg80211: World regulatory domain updated:
[   58.371953] cfg80211:  DFS Master region: unset
[   58.371956] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   58.371959] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   58.371962] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   58.371964] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   58.371967] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   58.371970] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   58.371973] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   58.371975] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   58.371977] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   59.674697] nvidia: module license 'NVIDIA' taints kernel.
[   59.674704] Disabling lock debugging due to kernel taint
[   59.688515] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   59.699137] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   59.699856] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:05:00.0 on minor 0
[   59.699868] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.96  Sun Nov  8 22:33:28 PST 2015
[   60.236979] nvidia_uvm: Loaded the UVM driver, major device number 247
[   61.128152] audit: type=1400 audit(1461422481.308:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=534 comm="apparmor_parser"
[   61.128162] audit: type=1400 audit(1461422481.308:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=534 comm="apparmor_parser"
[   61.128168] audit: type=1400 audit(1461422481.308:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=534 comm="apparmor_parser"
[   61.128174] audit: type=1400 audit(1461422481.308:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=534 comm="apparmor_parser"
[   61.217999] audit: type=1400 audit(1461422481.396:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=533 comm="apparmor_parser"
[   61.218010] audit: type=1400 audit(1461422481.396:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=533 comm="apparmor_parser"
[   61.261529] audit: type=1400 audit(1461422481.440:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=539 comm="apparmor_parser"
[   61.455369] audit: type=1400 audit(1461422481.632:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=540 comm="apparmor_parser"
[   61.455386] audit: type=1400 audit(1461422481.632:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=540 comm="apparmor_parser"
[   61.479725] NVRM: Your system is not currently configured to drive a VGA console
[   61.479732] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   61.479735] NVRM: requires the use of a text-mode VGA console. Use of other console
[   61.479737] NVRM: drivers including, but not limited to, vesafb, may result in
[   61.479739] NVRM: corruption and stability problems, and is not supported.
[   61.552747] audit: type=1400 audit(1461422481.732:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=541 comm="apparmor_parser"
[   62.593707] cgroup: new mount options do not match the existing superblock, will be ignored
[   62.922985] zram: Added device: zram0
[   62.923854] zram: Added device: zram1
[   63.800861] zram0: detected capacity change from 0 to 524247040
[   64.227444] Adding 511956k swap on /dev/zram0.  Priority:5 extents:1 across:511956k SSFS
[   64.229104] zram1: detected capacity change from 0 to 524247040
[   64.237326] Adding 511956k swap on /dev/zram1.  Priority:5 extents:1 across:511956k SSFS
[   73.619273] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   73.628492] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   73.641622] IPv6: ADDRCONF(NETDEV_UP): enp0s6: link is not ready
[   73.642418] forcedeth 0000:00:06.0 enp0s6: no link during initialization
[   73.642780] IPv6: ADDRCONF(NETDEV_UP): enp0s6: link is not ready
[   75.215856] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   76.204484] wlp3s0: authenticate with 40:f2:01:73:fa:4c
[   76.208593] wlp3s0: send auth to 40:f2:01:73:fa:4c (try 1/3)
[   76.210983] wlp3s0: authenticated
[   76.212066] wlp3s0: associate with 40:f2:01:73:fa:4c (try 1/3)
[   76.215082] wlp3s0: RX AssocResp from 40:f2:01:73:fa:4c (capab=0x431 status=0 aid=4)
[   76.215172] wlp3s0: associated
[   76.215226] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   76.386337] ath: EEPROM regdomain: 0x80fa
[   76.386342] ath: EEPROM indicates we should expect a country code
[   76.386345] ath: doing EEPROM country->regdmn map search
[   76.386346] ath: country maps to regdmn code: 0x37
[   76.386348] ath: Country alpha2 being used: FR
[   76.386350] ath: Regpair used: 0x37
[   76.386352] ath: regdomain 0x80fa dynamically updated by country IE
[   76.386356] cfg80211: Regulatory domain changed to country: FR
[   76.386357] cfg80211:  DFS Master region: ETSI
[   76.386360] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   76.386363] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   76.386366] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   76.386369] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   76.386371] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[   76.386374] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$

Dernière modification par paulwoisard (Le 23/04/2016, à 16:01)

Bougron · Le 23/04/2016, à 16:11

Je n'avais pas pensé à une mise à jour du bios!
Ton nouveau démarrage serait correct en temps, s'il y avait pas ce petit problème d'arrêt de 38 secondes que je ne sais pas expliquer.

[    2.714205] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   41.132572] EXT4-fs (sda1): INFO: recovery required on readonly filesystem

paulwoisard · Le 23/04/2016, à 16:18

Je ne sais pas pourquoi mais de temps en temps, le PC se fige quelques secondes.

Il y a 10 jours, j'ai commandé de la RAM sur internet (pour passer de 2Go à 4Go) je devrais la recevoir la semaine prochaine.

J'ai acheté cette RAM, car je me demande si ce n'est pas parce qu'il y a peu de mémoire que le PC se fige.

Qu'en penses-tu ?

Bougron · Le 23/04/2016, à 16:45

Avec 2 Go de RAM, si tu utilises assez fortement, il est possible que cela swappe.

Tu peux regarder l'utilisation du swap en direct en lançant l'application "moniteur systeme".

paulwoisard · Le 23/04/2016, à 16:59

Aujourd'hui la partition swap est de 3Go, est-ce que lorsque je passerais de 2 à 4Go de RAM, devrais-je modifier la taille de la partition swap ?

Bougron · Le 23/04/2016, à 18:12

Vaste débat sur ce problème
La règle ancienne est globalement si RAM < 1, 0 Go swap = 2,5 fois la RAM sinon 1,5 fois avec cette règle tu es arrivé à 3 Go de swap
C'est une règle que je n'ai jamais compris car certainement trop simpliste
Si tu te rappelles que le SWAP sert à mettre ce qui déborde le la RAM, on devrait arriver à dire que plus la taille de la RAM est grande, moins cela doit déborder!!!!
En fait cela dépend des applications qui vont consommer.
Si ta RAM actuelle ne déborde pas dans le swap, elle ne débordera pas non plus plus tard.
Si elle déborde, plus tard elle débordera moins souvent.
Donc si actuellement le débordement dans le swap qui devient trop petit pour libérer de la mémoire forçant arrêter des applications, ne se produit pas, tu n'as pas lieu d'augmenter la taille du swap. autrement tu aurait du déjà le faire.

Il me semble que la vraie question est: Si j'augmente la taille de la RAM de 2 Go, puis-je diminuer la taille du swap de 2 Go?
Ma réponse: puisque cela fonctionne, ne touches à rien, attends de manquer de place disque pour l'envisager.

Mais il y a une exception, si tu envisages d'hiberner, il faut que la partition swap puisse contenir ce qui est opérationnel en RAM. Dans ce contexte, on ne prend aucun risque. On met la taille de la RAM. Mais on pourrait ne mettre que la taille effectivement utilisée au moment de la demande de mise en hibernation, spécialement varipour la RAM de taille importante.

Dernière modification par Bougron (Le 23/04/2016, à 18:15)

moko138 · Le 23/04/2016, à 19:10

Bougron a écrit :

Je n'avais pas pensé à une mise à jour du bios!
Ton nouveau démarrage serait correct en temps, s'il y avait pas ce petit problème d'arrêt de 38 secondes que je ne sais pas expliquer.
[    2.714205] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   41.132572] EXT4-fs (sda1): INFO: recovery required on readonly filesystem

paulwoisard a écrit :

le PC est un HP Pavilion dv6710ef, un vieux pc portable.

smartctl...

paulwoisard · Le 23/04/2016, à 21:33

J'ai lancer le daemon smartd, pour l'instant il ne me dis rien de spécial.
Mais si grâce à lui il s'avère que le hdd est fatigué, existe-t-il un logiciel de clone de disque, comme Acronis True Image sous windows ?

moko138 · Le 24/04/2016, à 00:39

Donne

sudo smartctl -s on -a /dev/sda

paulwoisard · Le 24/04/2016, à 07:55

tiens :

paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$ sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de paul : 
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint M5
Device Model:     SAMSUNG HM160HI
Serial Number:    S18PJF0PC50365
LU WWN Device Id: 5 0f0000 000350365
Firmware Version: HH100-10
User Capacity:    160 041 885 696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0
SATA Version is:  SATA 2.5, 1.5 Gb/s
Local Time is:    Sun Apr 24 07:53:55 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (  32)	The self-test routine was interrupted
					by the host with a hard or soft reset.
Total time to complete Offline 
data collection: 		(   62) seconds.
Offline data collection
capabilities: 			 (0x51) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  62) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   051    Pre-fail  Always       -       24
  3 Spin_Up_Time            0x0007   252   252   025    Pre-fail  Always       -       2000
  4 Start_Stop_Count        0x0032   097   097   000    Old_age   Always       -       3373
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   252   252   051    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0025   252   252   015    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       3301
 10 Spin_Retry_Count        0x0033   252   252   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       917
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1719
184 End-to-End_Error        0x0033   252   252   070    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       210
188 Command_Timeout         0x0032   252   252   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   068   045   040    Old_age   Always       -       32 (Min/Max 16/55)
191 G-Sense_Error_Rate      0x0032   098   098   000    Old_age   Always       -       24062
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       70
193 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       19596
194 Temperature_Celsius     0x0022   064   045   000    Old_age   Always       -       32 (Min/Max 16/55)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       20012
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   252   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000a   100   100   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x0032   252   252   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Aborted by host               150%      3285         -
# 2  Short offline       Completed without error       00%      3285         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Interrupted [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$

moko138 · Le 24/04/2016, à 09:11

Le disque est en meilleur état que ce que j'imaginais.
Donc ce n'est peut-être pas la cause du démarrage lent.

en.wikipedia.org/wiki/S.M.A.R.T. a écrit :

191 G-sense Error Rate The count of errors resulting from externally induced shock & vibration.

Ligne à surveiller, 24.000 erreurs par vibration en 3.300 heures ?!
- -
Comme on voit que ce disque a connu des coups de chaud (55°C), veille à ce que ça ne se produise plus.
- -
Tu parles de 5 minutes. Mais ton dmesg est incomplet (76 secondes).
J'y relève 2 choses :
1) zram. À ta place, je désactiverai la compression de la ram. Au moins à titre de test.
2) :

[   61.479725] NVRM: Your system is not currently configured to drive a VGA console
[   61.479732] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   61.479735] NVRM: requires the use of a text-mode VGA console. Use of other console
[   61.479737] NVRM: drivers including, but not limited to, vesafb, may result in
[   61.479739] NVRM: corruption and stability problems, and is not supported.

D'après mes 1ères recherches, il faut adapter, dans /etc/default/grub, ce paragraphe

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

et la ligne commençant par

GRUB_CMDLINE_LINUX_DEFAULT=

Donne

cat /etc/default/grub

et

sudo lshw -c display

paulwoisard · Le 24/04/2016, à 09:23

Pour désactiver ZRAM j'ai fait ceci (cela suffit-il ?) :

paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$ sudo apt-get remove --purge zram-config

Première commande :

paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$ cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

GRUB_GFXPAYLOAD_LINUX=1280x800
paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$

Deuxième Commande :

paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$ sudo lshw -c display
  *-display               
       description: VGA compatible controller
       produit: G86M [GeForce 8400M GS]
       fabriquant: NVIDIA Corporation
       identifiant matériel: 0
       information bus: pci@0000:05:00.0
       version: a1
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
       configuration: driver=nvidia latency=0
       ressources: irq:28 mémoire:ce000000-ceffffff mémoire:d0000000-dfffffff mémoire:cc000000-cdffffff portE/S:4000(taille=128)
paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$

Dernière modification par paulwoisard (Le 24/04/2016, à 09:35)

Nuliel · Le 24/04/2016, à 10:03

Bonjour,

Peux tu donner le retour de cette commande:

sudo tune2fs -l /dev/sdaX

où sdaX est la partition racine

sudo fdisk -l

pour la connaître

paulwoisard · Le 24/04/2016, à 10:10

Bonjour,

Voici :

paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$ sudo fdisk -l
[sudo] Mot de passe de paul : 
Disque /dev/ram0 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram1 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram2 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram3 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram4 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram5 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram6 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram7 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram8 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram9 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram10 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram11 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram12 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram13 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram14 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram15 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disque /dev/sda : 149,1 GiB, 160041885696 octets, 312581808 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x145e69c8

Périphérique Amorçage     Start       Fin  Secteurs   Size Id Type
/dev/sda1    *             2048 308387839 308385792 147,1G 83 Linux
/dev/sda2             308389886 312580095   4190210     2G  5 Étendue
/dev/sda5             308389888 312580095   4190208     2G 82 partition d'échang
paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$

Et :

paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$ sudo tune2fs -l /dev/sda1
[sudo] Mot de passe de paul : 
tune2fs 1.42.13 (17-May-2015)
Filesystem volume name:   <none>
Last mounted on:          /
Filesystem UUID:          fc7186f2-db44-4466-8de1-933590c90406
Filesystem magic number:  0xEF53
Filesystem revision #:    1 (dynamic)
Filesystem features:      has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize
Filesystem flags:         signed_directory_hash 
Default mount options:    user_xattr acl
Filesystem state:         clean
Errors behavior:          Continue
Filesystem OS type:       Linux
Inode count:              9641984
Block count:              38548224
Reserved block count:     1927411
Free blocks:              33874272
Free inodes:              9328664
First block:              0
Block size:               4096
Fragment size:            4096
Reserved GDT blocks:      1014
Blocks per group:         32768
Fragments per group:      32768
Inodes per group:         8192
Inode blocks per group:   512
Flex block group size:    16
Filesystem created:       Sun Apr 10 09:06:31 2016
Last mount time:          Sun Apr 24 09:56:12 2016
Last write time:          Thu Apr 21 22:18:06 2016
Mount count:              91
Maximum mount count:      -1
Last checked:             Sun Apr 10 09:06:31 2016
Check interval:           0 (<none>)
Lifetime writes:          67 GB
Reserved blocks uid:      0 (user root)
Reserved blocks gid:      0 (group root)
First inode:              11
Inode size:	          256
Required extra isize:     28
Desired extra isize:      28
Journal inode:            8
First orphan inode:       6422557
Default directory hash:   half_md4
Directory Hash Seed:      6164b15a-7777-440e-a517-6715a179e736
Journal backup:           inode blocks
paul@maryxaviere-HP-Pavilion-dv6700-Notebook-PC:~$

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 21/04/2016, à 14:27

BIOS lent à démarrer

#2 Le 21/04/2016, à 17:32

Re : BIOS lent à démarrer

#3 Le 21/04/2016, à 18:50

Re : BIOS lent à démarrer

#4 Le 21/04/2016, à 19:50

Re : BIOS lent à démarrer

#5 Le 21/04/2016, à 19:57

Re : BIOS lent à démarrer

#6 Le 21/04/2016, à 20:16

Re : BIOS lent à démarrer

#7 Le 21/04/2016, à 20:46

Re : BIOS lent à démarrer

#8 Le 21/04/2016, à 21:12

Re : BIOS lent à démarrer

#9 Le 21/04/2016, à 21:21

Re : BIOS lent à démarrer

#10 Le 21/04/2016, à 21:26

Re : BIOS lent à démarrer

#11 Le 22/04/2016, à 18:53

Re : BIOS lent à démarrer

#12 Le 23/04/2016, à 15:55

Re : BIOS lent à démarrer

#13 Le 23/04/2016, à 16:11

Re : BIOS lent à démarrer

#14 Le 23/04/2016, à 16:18

Re : BIOS lent à démarrer

#15 Le 23/04/2016, à 16:45

Re : BIOS lent à démarrer

#16 Le 23/04/2016, à 16:59

Re : BIOS lent à démarrer

#17 Le 23/04/2016, à 18:12

Re : BIOS lent à démarrer

#18 Le 23/04/2016, à 19:10

Re : BIOS lent à démarrer

#19 Le 23/04/2016, à 21:33

Re : BIOS lent à démarrer

#20 Le 24/04/2016, à 00:39

Re : BIOS lent à démarrer

#21 Le 24/04/2016, à 07:55

Re : BIOS lent à démarrer

#22 Le 24/04/2016, à 09:11

Re : BIOS lent à démarrer

#23 Le 24/04/2016, à 09:23

Re : BIOS lent à démarrer

#24 Le 24/04/2016, à 10:03

Re : BIOS lent à démarrer

#25 Le 24/04/2016, à 10:10

Re : BIOS lent à démarrer

Pied de page des forums