Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 08/05/2016, à 16:07

Kuroux417

Ubuntu 16.04 plante plusieurs fois par jours.

Bonjour,

Je suis passé à Ubuntu 16.04 LTS, installation sans problème. Mais après quelques heures d'utilisation mon ordinateur plante. La première fois je me dis que ça doit être un problème technique donc je l'éteins "à la barbare" grâce au bouton sur l'alimentation. Je tiens à préciser que quand il plante je ne peux plus rien faire et que s'il y a une musique en route ou une vidéo le son de cette dernière fait un effet bizarre qui repasse le dernier passage en boucle. Je suis retourné sous la version 14.04 LTS car je n'en pouvais plus de ces plantages. Mais une question reste en suspend ; De quoi viennent-ils? De mon ordi ou d'Ubuntu lui-même?

Voici ma config :
AMD A4-3300
Radeon HD 6670
4go de RAM Corsair

En espérant faire la lumière sur ce problème. Bonne journée à tous.


Ordinateur de bureau : AMD A4-3300 2.5GHZ / RADEON HD 6670 / 4go de RAM Corsair / HDD 1To 7200 RPM --> Ubuntu 14.04 LTS
Netbook : Asus eeepc x101ch / Intel Atom 1.6GHZ / 1go de RAM / HDD 320go --> Xubuntu 16.04 LTS

Utilisateur de Linux depuis 2016.

Hors ligne

#2 Le 08/05/2016, à 16:25

malbo

Re : Ubuntu 16.04 plante plusieurs fois par jours.

J'ai bien noté que tu es retourné sous la version 14.04. Peux-tu passer cette commande dans un terminal (il y a un espace avant le -) :

uname -a 

Tu colleras le résultat de cette commande dans ta réponse à ce message.

Hors ligne

#3 Le 08/05/2016, à 16:42

Kuroux417

Re : Ubuntu 16.04 plante plusieurs fois par jours.

malbo a écrit :

J'ai bien noté que tu es retourné sous la version 14.04. Peux-tu passer cette commande dans un terminal (il y a un espace avant le -) :

uname -a 

Tu colleras le résultat de cette commande dans ta réponse à ce message.

Voilà la réponse :

Linux [mon prénom]-GA-A55M-S2V 4.2.0-27-generic #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:27 UTC 2016 i686 athlon i686 GNU/Linux


Ordinateur de bureau : AMD A4-3300 2.5GHZ / RADEON HD 6670 / 4go de RAM Corsair / HDD 1To 7200 RPM --> Ubuntu 14.04 LTS
Netbook : Asus eeepc x101ch / Intel Atom 1.6GHZ / 1go de RAM / HDD 320go --> Xubuntu 16.04 LTS

Utilisateur de Linux depuis 2016.

Hors ligne

#4 Le 08/05/2016, à 16:47

malbo

Re : Ubuntu 16.04 plante plusieurs fois par jours.

Kuroux417 a écrit :

4.2.0-27-generic

Ce n'est pas le noyau le mieux adapté à mon avis. Peux-tu faire un Boot-Info depuis une session de ton Ubuntu installé et donner l'URL de ce Boot-Info dans ta réponse ?

Hors ligne

#5 Le 08/05/2016, à 16:53

Kuroux417

Re : Ubuntu 16.04 plante plusieurs fois par jours.


Ordinateur de bureau : AMD A4-3300 2.5GHZ / RADEON HD 6670 / 4go de RAM Corsair / HDD 1To 7200 RPM --> Ubuntu 14.04 LTS
Netbook : Asus eeepc x101ch / Intel Atom 1.6GHZ / 1go de RAM / HDD 320go --> Xubuntu 16.04 LTS

Utilisateur de Linux depuis 2016.

Hors ligne

#6 Le 08/05/2016, à 17:11

malbo

Re : Ubuntu 16.04 plante plusieurs fois par jours.

Ton Boot-Info est là :

 Boot Info Script cfd9efe + Boot-Repair extra info      [Boot-Info 26Apr2016]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.4 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048 1,945,141,247 1,945,139,200  83 Linux
/dev/sda2       1,945,143,294 1,953,523,711     8,380,418   5 Extended
/dev/sda5       1,945,143,296 1,953,523,711     8,380,416  82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        148c40a6-0ed9-4899-9b33-1e09113aa374   ext4       
/dev/sda5        c1b3b116-a6c7-4744-9c55-9328177e63ca   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 May  8 17:51 ata-ST1000DM003-1SB10C_S9A0113R -> ../../sda
lrwxrwxrwx 1 root root 10 May  8 16:11 ata-ST1000DM003-1SB10C_S9A0113R-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May  8 16:11 ata-ST1000DM003-1SB10C_S9A0113R-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May  8 16:11 ata-ST1000DM003-1SB10C_S9A0113R-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 May  8 16:11 usb-Generic_USB_CF_Reader_2004888-0:1 -> ../../sdc
lrwxrwxrwx 1 root root  9 May  8 16:11 usb-Generic_USB_MS_Reader_2004888-0:3 -> ../../sde
lrwxrwxrwx 1 root root  9 May  8 16:11 usb-Generic_USB_SD_Reader_2004888-0:0 -> ../../sdb
lrwxrwxrwx 1 root root  9 May  8 16:11 usb-Generic_USB_SM_Reader_2004888-0:2 -> ../../sdd
lrwxrwxrwx 1 root root  9 May  8 17:51 wwn-0x5000c5008c43d336 -> ../../sda
lrwxrwxrwx 1 root root 10 May  8 16:11 wwn-0x5000c5008c43d336-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May  8 16:11 wwn-0x5000c5008c43d336-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May  8 16:11 wwn-0x5000c5008c43d336-part5 -> ../../sda5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,errors=remount-ro)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  148c40a6-0ed9-4899-9b33-1e09113aa374
else
  search --no-floppy --fs-uuid --set=root 148c40a6-0ed9-4899-9b33-1e09113aa374
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-148c40a6-0ed9-4899-9b33-1e09113aa374' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  148c40a6-0ed9-4899-9b33-1e09113aa374
	else
	  search --no-floppy --fs-uuid --set=root 148c40a6-0ed9-4899-9b33-1e09113aa374
	fi
	linux	/boot/vmlinuz-4.2.0-27-generic root=UUID=148c40a6-0ed9-4899-9b33-1e09113aa374 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.2.0-27-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-148c40a6-0ed9-4899-9b33-1e09113aa374' {
	menuentry 'Ubuntu, avec Linux 4.2.0-27-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.2.0-27-generic-advanced-148c40a6-0ed9-4899-9b33-1e09113aa374' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  148c40a6-0ed9-4899-9b33-1e09113aa374
		else
		  search --no-floppy --fs-uuid --set=root 148c40a6-0ed9-4899-9b33-1e09113aa374
		fi
		echo	'Chargement de Linux 4.2.0-27-generic…'
		linux	/boot/vmlinuz-4.2.0-27-generic root=UUID=148c40a6-0ed9-4899-9b33-1e09113aa374 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.2.0-27-generic
	}
	menuentry 'Ubuntu, with Linux 4.2.0-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.2.0-27-generic-recovery-148c40a6-0ed9-4899-9b33-1e09113aa374' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  148c40a6-0ed9-4899-9b33-1e09113aa374
		else
		  search --no-floppy --fs-uuid --set=root 148c40a6-0ed9-4899-9b33-1e09113aa374
		fi
		echo	'Chargement de Linux 4.2.0-27-generic…'
		linux	/boot/vmlinuz-4.2.0-27-generic root=UUID=148c40a6-0ed9-4899-9b33-1e09113aa374 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.2.0-27-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  148c40a6-0ed9-4899-9b33-1e09113aa374
	else
	  search --no-floppy --fs-uuid --set=root 148c40a6-0ed9-4899-9b33-1e09113aa374
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  148c40a6-0ed9-4899-9b33-1e09113aa374
	else
	  search --no-floppy --fs-uuid --set=root 148c40a6-0ed9-4899-9b33-1e09113aa374
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=148c40a6-0ed9-4899-9b33-1e09113aa374 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=c1b3b116-a6c7-4744-9c55-9328177e63ca none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

   4.136676788 = 4.441722880    boot/grub/grub.cfg                             1
 226.323238373 = 243.012726784  boot/grub/i386-pc/core.img                     1
   4.136669159 = 4.441714688    boot/vmlinuz-4.2.0-27-generic                  1
   4.136669159 = 4.441714688    vmlinuz                                        1
   3.133045197 = 3.364081664    boot/initrd.img-4.2.0-27-generic               2
   3.133045197 = 3.364081664    initrd.img                                     2

========= Devices which don't seem to have a corresponding hard drive: =========

sdb sdc sdd sde 


ADDITIONAL INFORMATION :
=================== log of boot-info 2016-05-08__17h51 ===================
boot-info version : 4ppa37
boot-sav version : 4ppa37
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa37
boot-info is executed in installed-session (Ubuntu 14.04.4 LTS, trusty, Ubuntu, i686)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.2.0-27-generic root=UUID=148c40a6-0ed9-4899-9b33-1e09113aa374 ro quiet splash vt.handoff=7

=================== os-prober:
/dev/disk/by-uuid/148c40a6-0ed9-4899-9b33-1e09113aa374:L'OS actuellement utilisé - Ubuntu 14.04.4 LTS CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="148c40a6-0ed9-4899-9b33-1e09113aa374" TYPE="ext4"
/dev/sda5: UUID="c1b3b116-a6c7-4744-9c55-9328177e63ca" TYPE="swap"

disk/by-uuid/148c40a6-0ed9-4899-9b33-1e09113aa374 (sda) has unknown type. Veuillez indiquer ce message à boot.repair@gmail.com

1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Linux not detected by os-prober on sda1. Veuillez indiquer ce message à boot.repair@gmail.com
Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.

=================== //etc/grub.d/ :
drwxr-xr-x  2 root root     4096 févr. 18 00:17 grub.d
total 76
-rwxr-xr-x 1 root root  9791 déc.  19 09:08 00_header
-rwxr-xr-x 1 root root  6058 mai   13  2015 05_debian_theme
-rwxr-xr-x 1 root root 11608 déc.  19 09:08 10_linux
-rwxr-xr-x 1 root root 10412 déc.  19 09:08 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 déc.  19 09:08 30_os-prober
-rwxr-xr-x 1 root root  1416 déc.  19 09:08 30_uefi-firmware
-rwxr-xr-x 1 root root   214 déc.  19 09:08 40_custom
-rwxr-xr-x 1 root root   216 déc.  19 09:08 41_custom
-rw-r--r-- 1 root root   483 déc.  19 09:08 README




=================== //etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not EFI-compatible.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA ST1000DM003-1SB1 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
1      1049kB  996GB   996GB   primary   ext4            boot
2      996GB   1000GB  4291MB  extended
5      996GB   1000GB  4291MB  logical   linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:msdos:ATA ST1000DM003-1SB1;
1:1049kB:996GB:996GB:ext4::boot;
2:996GB:1000GB:4291MB:::;
5:996GB:1000GB:4291MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        931,5G
sda1  part ext4   927,5G
sda2  part            1K
sda5  part swap       4G

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /
sda2     1  0  0
sda5     1  0  0         [SWAP]


=================== mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
tracefs on /var/lib/ureadahead/debugfs/tracing type tracefs (rw,relatime)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=gregory)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdd (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sde (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  ati autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet hwrng i2c-0 i2c-1 input kmsg log mapper mcelog mem memory_bandwidth ndctl0 net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdc sdd sde sg0 sg1 sg2 sg3 sg4 shm snapshot snd stderr stdin stdout uhid uinput urandom usb vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  2.0G   12K  2.0G   1% /dev
tmpfs          tmpfs     404M  1.3M  403M   1% /run
/dev/sda1      ext4      913G  4.5G  862G   1% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     2.0G  1.4M  2.0G   1% /run/shm
none           tmpfs     100M   68K  100M   1% /run/user

=================== fdisk -l:

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x000ab538

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048  1945141247   972569600   83  Linux
/dev/sda2      1945143294  1953523711     4190209    5  Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5      1945143296  1953523711     4190208   82  Linux swap / Solaris




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== Blockers in case of suggested repair
Veuillez utiliser ce logiciel dans une session-live (live-CD ou live-USB). Cela vous permettra d'utiliser cette fonctionnalité.


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [Linux] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

A mon avis, tu aurais dû installer Ubuntu 14.04.1 64 bits (*) qui vient avec le noyau 3.13.0-x (ma recette pour faire une LiveUSB de cette version ici). Mais si tu es certain que ton installation précédente de Ubuntu 14.04 était déjà avec le noyau 4.2.0-x comme ton install actuelle, oublie ma remarque et reste comme ça.

(*) ton installation actuelle est 32 bits alors que 64 bits serait plus adapté à ta machine.

Dernière modification par malbo (Le 08/05/2016, à 17:12)

Hors ligne

#7 Le 08/05/2016, à 17:42

Kuroux417

Re : Ubuntu 16.04 plante plusieurs fois par jours.

Merci je vais installer la version 64 bits d'Ubuntu 16.04 et voir si ça plante encore. Merci pour ton aide. Bonne journée.


Ordinateur de bureau : AMD A4-3300 2.5GHZ / RADEON HD 6670 / 4go de RAM Corsair / HDD 1To 7200 RPM --> Ubuntu 14.04 LTS
Netbook : Asus eeepc x101ch / Intel Atom 1.6GHZ / 1go de RAM / HDD 320go --> Xubuntu 16.04 LTS

Utilisateur de Linux depuis 2016.

Hors ligne

#8 Le 08/05/2016, à 19:57

malbo

Re : Ubuntu 16.04 plante plusieurs fois par jours.

Kuroux417 a écrit :

je vais installer la version 64 bits d'Ubuntu 16.04

Moi je ne t'ai absolument pas conseillé ça mais bon...

Hors ligne