Pages : 1
#1 Le 10/09/2016, à 14:08
- MC44
démarrage trés lent d'ubuntu 16.04 LTS
Bonjour et merci d'avance pour l'aide...
Depuis la mise à jour de 14 vers 16, lenteur au démarrage : 1minute pour accéder au login MDP puis 30 secondes pour accéder au bureau.
J'ai vu dans une discussion que cela pouvait venir d'un problème UUID notament dans le FSTAB.
contenu du FSTAB :
michel@michel-Inspiron-530:~$ pg /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# /boot was on /dev/sda1 during installation
UUID=3c1e507e-c4d4-4506-b820-efe75e6e839a /boot ext2 defaults 0 2
# /dev/mapper/ubuntu--vg-root
UUID=47cc3546-b4b2-4c40-bd99-5d8561c36efa / ext4 errors=remount-ro 0 1
# /dev/mapper/ubuntu--vg-swap_1
UUID=de52eca9-7541-4796-b7e3-81bebb80d18e none swap sw 0 0
# /dev/sda5la commande blkid donne ce résultat :
michel@michel-Inspiron-530:~$ sudo blkid
/dev/sda1: UUID="3c1e507e-c4d4-4506-b820-efe75e6e839a" TYPE="ext2" PARTUUID="000e95fd-01"
/dev/sda5: UUID="69ZtXv-6hzu-NhmZ-kIuz-me4K-EVwE-1uo94H" TYPE="LVM2_member" PARTUUID="000e95fd-05"
/dev/mapper/ubuntu--vg-root: UUID="47cc3546-b4b2-4c40-bd99-5d8561c36efa" TYPE="ext4"
/dev/mapper/ubuntu--vg-swap_1: UUID="de52eca9-7541-4796-b7e3-81bebb80d18e" TYPE="swap"Gparted me donne un résultat un peu différent :
sda1
et
sda5
Avec la version précedente le demarrage était rapide c'est ce qui m'interroge.
Merci de votre aide.
Hors ligne
#2 Le 10/09/2016, à 14:29
- Bougron
Re : démarrage trés lent d'ubuntu 16.04 LTS
BonjourD
Le démarrage est trop rapide pour que cela soit lié à un mauvais UUID (90 secondes d'attente avant d'avoir le logging
Peux-tu fournir la trace du démarrage
dmesg >TRACE.txt
gedit TRACE.txten postant la volumineuse liste affichée.
Tu donneras aussi le retour de
systemd-analyze blame Dernière modification par Bougron (Le 10/09/2016, à 14:30)
Hors ligne
#3 Le 10/09/2016, à 18:34
- MC44
Re : démarrage trés lent d'ubuntu 16.04 LTS
Merci pour ton aide.
Voici le resultat de TRACE.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-36-generic (buildd@lcy01-01) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #55-Ubuntu SMP Thu Aug 11 18:01:55 UTC 2016 (Ubuntu 4.4.0-36.55-generic 4.4.16)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4.0-36-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f58ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f590000-0x000000007f5e2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f5e3000-0x000000007f5effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f5f0000-0x000000007f5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Dell Inc. Inspiron 530/0RY007, BIOS 1.0.18 02/24/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7f590 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CAFFF write-protect
[ 0.000000] CB000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 base 07F600000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 2038MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 2038M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2038MB, range: 2MB, type UC
[ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000f3f00-0x000f3f0f] mapped at [ffff8800000f3f00]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33908000-0x35c7bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F97A0 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x000000007F5E3080 00005C (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x000000007F5E7200 0000F4 (v03 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20150930/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20150930/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20150930/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/8 (20150930/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20150930/tbfadt-704)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20150930/tbfadt-704)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20150930/tbfadt-704)
[ 0.000000] ACPI: DSDT 0x000000007F5E3200 003FFC (v01 DELL AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x000000007F590000 000040
[ 0.000000] ACPI: FACS 0x000000007F590000 000040
[ 0.000000] ACPI: HPET 0x000000007F5E73C0 000038 (v01 DELL FX09 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 0x000000007F5E7400 00003C (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SLIC 0x000000007F5E7440 000176 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DMY2 0x000000007F5E75C0 000080 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 0x000000007F5E7300 000084 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 0x000000007F5E7CA0 000380 (v01 PmRef CpuPm 00003000 INTL 20041203)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f58ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x7f58b000-0x7f58ffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007f58ffff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f58ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f58ffff]
[ 0.000000] On node 0 totalpages: 521517
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8087 pages used for memmap
[ 0.000000] DMA32 zone: 517520 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x7f800000-0x7fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88007f200000 s98008 r8192 d28968 u524288
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513345
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-36-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1997656K/2086068K available (8394K kernel code, 1282K rwdata, 3944K rodata, 1480K init, 1292K bss, 88412K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2327.451 MHz processor
[ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4654.90 BogoMIPS (lpj=9309804)
[ 0.004016] pid_max: default: 32768 minimum: 301
[ 0.004023] ACPI: Core revision 20150930
[ 0.011056] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.011084] Security Framework initialized
[ 0.011088] Yama: becoming mindful.
[ 0.011111] AppArmor: AppArmor initialized
[ 0.011308] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012207] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.012680] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.012684] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.012989] Initializing cgroup subsys io
[ 0.012995] Initializing cgroup subsys memory
[ 0.013005] Initializing cgroup subsys devices
[ 0.013009] Initializing cgroup subsys freezer
[ 0.013013] Initializing cgroup subsys net_cls
[ 0.013016] Initializing cgroup subsys perf_event
[ 0.013020] Initializing cgroup subsys net_prio
[ 0.013024] Initializing cgroup subsys hugetlb
[ 0.013028] Initializing cgroup subsys pids
[ 0.013055] CPU: Physical Processor ID: 0
[ 0.013056] CPU: Processor Core ID: 0
[ 0.013058] mce: CPU supports 6 MCE banks
[ 0.013066] CPU0: Thermal monitoring enabled (TM2)
[ 0.013071] process: using mwait in idle threads
[ 0.013077] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.013078] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.013435] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000)
[ 0.016008] ftrace: allocating 31996 entries in 125 pages
[ 0.028119] smpboot: Max logical packages: 2
[ 0.028123] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.028489] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (family: 0x6, model: 0xf, stepping: 0xb)
[ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.072000] core: PEBS disabled due to CPU errata
[ 0.072000] ... version: 2
[ 0.072000] ... bit width: 40
[ 0.072000] ... generic registers: 2
[ 0.072000] ... value mask: 000000ffffffffff
[ 0.072000] ... max period: 000000007fffffff
[ 0.072000] ... fixed-purpose events: 3
[ 0.072000] ... event mask: 0000000700000003
[ 0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072000] x86: Booting SMP configuration:
[ 0.072000] .... node #0, CPUs: #1
[ 0.072000] x86: Booted up 1 node, 2 CPUs
[ 0.072000] smpboot: Total of 2 processors activated (9309.80 BogoMIPS)
[ 0.072121] devtmpfs: initialized
[ 0.073425] evm: security.selinux
[ 0.073427] evm: security.SMACK64
[ 0.073428] evm: security.SMACK64EXEC
[ 0.073430] evm: security.SMACK64TRANSMUTE
[ 0.073431] evm: security.SMACK64MMAP
[ 0.073432] evm: security.ima
[ 0.073434] evm: security.capability
[ 0.076034] PM: Registering ACPI NVS region [mem 0x7f590000-0x7f5e2fff] (339968 bytes)
[ 0.076127] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.076170] pinctrl core: initialized pinctrl subsystem
[ 0.076179] RTC time: 16:18:43, date: 09/10/16
[ 0.076302] NET: Registered protocol family 16
[ 0.084006] cpuidle: using governor ladder
[ 0.092004] cpuidle: using governor menu
[ 0.092009] PCCT header not found.
[ 0.092077] ACPI: bus type PCI registered
[ 0.092079] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.092167] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.092171] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.092191] PCI: Using configuration type 1 for base access
[ 0.104098] ACPI: Added _OSI(Module Device)
[ 0.104100] ACPI: Added _OSI(Processor Device)
[ 0.104102] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.104104] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.107687] ACPI: Dynamic OEM Table Load:
[ 0.107693] ACPI: SSDT 0xFFFF88007C88F800 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
[ 0.108106] ACPI: Dynamic OEM Table Load:
[ 0.108111] ACPI: SSDT 0xFFFF88007C232600 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
[ 0.108430] ACPI: Interpreter enabled
[ 0.108436] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.108441] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.108456] ACPI: (supports S0 S3 S4 S5)
[ 0.108457] ACPI: Using IOAPIC for interrupt routing
[ 0.108482] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.112660] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.112667] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.112672] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.112915] PCI host bridge to bus 0000:00
[ 0.112919] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.112922] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.112924] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.112926] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.112929] pci_bus 0000:00: root bus resource [mem 0x7f600000-0xfebfffff window]
[ 0.112931] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.112941] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.113052] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.113091] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.113176] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
[ 0.113189] pci 0000:00:02.0: reg 0x10: [mem 0xfdf00000-0xfdf7ffff]
[ 0.113195] pci 0000:00:02.0: reg 0x14: [io 0xff00-0xff07]
[ 0.113201] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.113206] pci 0000:00:02.0: reg 0x1c: [mem 0xfdb00000-0xfdbfffff]
[ 0.113330] pci 0000:00:19.0: [8086:10c0] type 00 class 0x020000
[ 0.113354] pci 0000:00:19.0: reg 0x10: [mem 0xfdfc0000-0xfdfdffff]
[ 0.113362] pci 0000:00:19.0: reg 0x14: [mem 0xfdfff000-0xfdffffff]
[ 0.113370] pci 0000:00:19.0: reg 0x18: [io 0xfe00-0xfe1f]
[ 0.113416] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.113464] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.113517] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.113560] pci 0000:00:1a.0: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.113633] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.113684] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.113727] pci 0000:00:1a.1: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.113800] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.113851] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.113894] pci 0000:00:1a.2: reg 0x20: [io 0xfb00-0xfb1f]
[ 0.113968] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.114025] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.114051] pci 0000:00:1a.7: reg 0x10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.114120] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.114171] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.114223] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.114249] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
[ 0.114305] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.114356] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.114406] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.114450] pci 0000:00:1d.0: reg 0x20: [io 0xfa00-0xfa1f]
[ 0.114523] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.114573] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.114616] pci 0000:00:1d.1: reg 0x20: [io 0xf900-0xf91f]
[ 0.114689] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.114738] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.114782] pci 0000:00:1d.2: reg 0x20: [io 0xf800-0xf81f]
[ 0.114855] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.114910] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.114937] pci 0000:00:1d.7: reg 0x10: [mem 0xfdffd000-0xfdffd3ff]
[ 0.115005] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.115055] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.115105] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.115191] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.115243] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[ 0.115323] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.115328] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.115332] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[ 0.115336] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
[ 0.115438] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
[ 0.115457] pci 0000:00:1f.2: reg 0x10: [io 0xf700-0xf707]
[ 0.115465] pci 0000:00:1f.2: reg 0x14: [io 0xf600-0xf603]
[ 0.115472] pci 0000:00:1f.2: reg 0x18: [io 0xf500-0xf507]
[ 0.115480] pci 0000:00:1f.2: reg 0x1c: [io 0xf400-0xf403]
[ 0.115487] pci 0000:00:1f.2: reg 0x20: [io 0xf300-0xf30f]
[ 0.115495] pci 0000:00:1f.2: reg 0x24: [io 0xf200-0xf20f]
[ 0.115601] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.115618] pci 0000:00:1f.3: reg 0x10: [mem 0xfdffc000-0xfdffc0ff 64bit]
[ 0.115637] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.115740] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[ 0.115759] pci 0000:00:1f.5: reg 0x10: [io 0xf000-0xf007]
[ 0.115766] pci 0000:00:1f.5: reg 0x14: [io 0xef00-0xef03]
[ 0.115774] pci 0000:00:1f.5: reg 0x18: [io 0xee00-0xee07]
[ 0.115781] pci 0000:00:1f.5: reg 0x1c: [io 0xed00-0xed03]
[ 0.115789] pci 0000:00:1f.5: reg 0x20: [io 0xec00-0xec0f]
[ 0.115796] pci 0000:00:1f.5: reg 0x24: [io 0xeb00-0xeb0f]
[ 0.115932] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.115936] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.115939] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.115943] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.116020] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.116024] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.116028] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.116033] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.116036] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.116038] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.116041] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.116043] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.116046] pci 0000:00:1e.0: bridge window [mem 0x7f600000-0xfebfffff window] (subtractive decode)
[ 0.116541] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.116604] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.116667] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.116731] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.116792] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.116853] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.116913] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.116974] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 0.117073] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.117175] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.117175] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.117175] vgaarb: loaded
[ 0.117175] vgaarb: bridge control possible 0000:00:02.0
[ 0.117175] SCSI subsystem initialized
[ 0.117175] libata version 3.00 loaded.
[ 0.117175] ACPI: bus type USB registered
[ 0.117175] usbcore: registered new interface driver usbfs
[ 0.117175] usbcore: registered new interface driver hub
[ 0.117175] usbcore: registered new device driver usb
[ 0.117175] PCI: Using ACPI for IRQ routing
[ 0.123117] PCI: pci_cache_line_size set to 64 bytes
[ 0.123158] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.123160] e820: reserve RAM buffer [mem 0x7f590000-0x7fffffff]
[ 0.123295] NetLabel: Initializing
[ 0.123297] NetLabel: domain hash size = 128
[ 0.123298] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.123317] NetLabel: unlabeled traffic allowed by default
[ 0.123344] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.123344] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.123344] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.125014] amd_nb: Cannot enumerate AMD northbridges
[ 0.125014] clocksource: Switched to clocksource hpet
[ 0.133143] AppArmor: AppArmor Filesystem Enabled
[ 0.133238] pnp: PnP ACPI init
[ 0.133439] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.133442] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.133445] system 00:00: [io 0x0290-0x0297] has been reserved
[ 0.133448] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.133453] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133538] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.133685] pnp 00:02: [dma 2]
[ 0.133724] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.133821] system 00:03: [io 0x0400-0x04bf] could not be reserved
[ 0.133825] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134048] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.134052] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134160] system 00:05: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.134163] system 00:05: [mem 0x7f600000-0x7f6fffff] has been reserved
[ 0.134166] system 00:05: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.134169] system 00:05: [mem 0x7f590000-0x7f5fffff] could not be reserved
[ 0.134171] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.134174] system 00:05: [mem 0x00100000-0x7f58ffff] could not be reserved
[ 0.134177] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.134179] system 00:05: [mem 0xfed14000-0xfed1dfff] has been reserved
[ 0.134182] system 00:05: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.134184] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.134187] system 00:05: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.134189] system 00:05: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.134192] system 00:05: [mem 0x000e0000-0x000effff] has been reserved
[ 0.134196] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.134204] pnp: PnP ACPI: found 6 devices
[ 0.141083] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.141107] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.141111] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.141115] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.141118] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.141123] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.141126] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.141131] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.141135] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.141141] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.141143] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.141146] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.141148] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.141151] pci_bus 0000:00: resource 8 [mem 0x7f600000-0xfebfffff window]
[ 0.141153] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.141155] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.141158] pci_bus 0000:01: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.141160] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.141162] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.141165] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.141167] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
[ 0.141169] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
[ 0.141172] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.141174] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.141176] pci_bus 0000:02: resource 8 [mem 0x7f600000-0xfebfffff window]
[ 0.141215] NET: Registered protocol family 2
[ 0.141420] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.141485] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.141579] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.141625] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.141641] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.141700] NET: Registered protocol family 1
[ 0.141719] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.142798] PCI: CLS 64 bytes, default 64
[ 0.142856] Trying to unpack rootfs image as initramfs...
[ 0.811710] Freeing initrd memory: 36304K (ffff880033908000 - ffff880035c7c000)
[ 0.811960] Scanning for low memory corruption every 60 seconds
[ 0.812435] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.812489] audit: initializing netlink subsys (disabled)
[ 0.812517] audit: type=2000 audit(1473524323.812:1): initialized
[ 0.812919] Initialise system trusted keyring
[ 0.813064] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.815338] zbud: loaded
[ 0.815554] VFS: Disk quotas dquot_6.6.0
[ 0.815603] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.815989] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.816336] fuse init (API version 7.23)
[ 0.816513] Key type big_key registered
[ 0.816535] Allocating IMA MOK and blacklist keyrings.
[ 0.816910] Key type asymmetric registered
[ 0.816913] Asymmetric key parser 'x509' registered
[ 0.816964] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.816995] io scheduler noop registered
[ 0.816999] io scheduler deadline registered (default)
[ 0.817042] io scheduler cfq registered
[ 0.817358] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.817367] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.817412] intel_idle: does not run on family 6 model 15
[ 0.817506] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.817511] ACPI: Power Button [PWRB]
[ 0.817570] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.817573] ACPI: Power Button [PWRF]
[ 0.818136] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.818138] ACPI: Thermal Zone [THRM] (40 C)
[ 0.818181] GHES: HEST is not enabled!
[ 0.818290] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.820148] Linux agpgart interface v0.103
[ 0.820219] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[ 0.820237] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.821093] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.821218] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.824545] brd: module loaded
[ 0.825882] loop: module loaded
[ 0.826070] ata_piix 0000:00:1f.2: version 2.13
[ 0.826182] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.826949] scsi host0: ata_piix
[ 0.827063] scsi host1: ata_piix
[ 0.827118] ata1: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[ 0.827123] ata2: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[ 0.827205] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.827641] scsi host2: ata_piix
[ 0.827734] scsi host3: ata_piix
[ 0.827790] ata3: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xec00 irq 19
[ 0.827793] ata4: SATA max UDMA/133 cmd 0xee00 ctl 0xed00 bmdma 0xec08 irq 19
[ 0.827917] libphy: Fixed MDIO Bus: probed
[ 0.827920] tun: Universal TUN/TAP device driver, 1.6
[ 0.827922] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.827976] PPP generic driver version 2.4.2
[ 0.828063] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.828070] ehci-pci: EHCI PCI platform driver
[ 0.828175] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.828183] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.828195] ehci-pci 0000:00:1a.7: debug port 1
[ 0.832105] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.832125] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdffe000
[ 0.844025] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.844091] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.844095] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.844098] usb usb1: Product: EHCI Host Controller
[ 0.844100] usb usb1: Manufacturer: Linux 4.4.0-36-generic ehci_hcd
[ 0.844103] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.844252] hub 1-0:1.0: USB hub found
[ 0.844260] hub 1-0:1.0: 6 ports detected
[ 0.844523] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.844530] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.844540] ehci-pci 0000:00:1d.7: debug port 1
[ 0.848432] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.848444] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffd000
[ 0.860041] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.860083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.860086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.860089] usb usb2: Product: EHCI Host Controller
[ 0.860092] usb usb2: Manufacturer: Linux 4.4.0-36-generic ehci_hcd
[ 0.860094] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.860236] hub 2-0:1.0: USB hub found
[ 0.860243] hub 2-0:1.0: 6 ports detected
[ 0.860417] ehci-platform: EHCI generic platform driver
[ 0.860432] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.860437] ohci-pci: OHCI PCI platform driver
[ 0.860452] ohci-platform: OHCI generic platform driver
[ 0.860463] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.860546] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.860553] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.860560] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.860584] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fd00
[ 0.860632] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.860635] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.860637] usb usb3: Product: UHCI Host Controller
[ 0.860639] usb usb3: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 0.860641] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.860757] hub 3-0:1.0: USB hub found
[ 0.860764] hub 3-0:1.0: 2 ports detected
[ 0.860939] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.860945] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.860951] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.860974] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fc00
[ 0.861021] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.861023] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.861026] usb usb4: Product: UHCI Host Controller
[ 0.861028] usb usb4: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 0.861030] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.861147] hub 4-0:1.0: USB hub found
[ 0.861154] hub 4-0:1.0: 2 ports detected
[ 0.861323] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.861330] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.861336] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.861353] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fb00
[ 0.861399] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.861402] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.861404] usb usb5: Product: UHCI Host Controller
[ 0.861406] usb usb5: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 0.861409] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.861524] hub 5-0:1.0: USB hub found
[ 0.861531] hub 5-0:1.0: 2 ports detected
[ 0.861700] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.861707] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.861713] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.861730] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fa00
[ 0.861774] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.861777] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.861779] usb usb6: Product: UHCI Host Controller
[ 0.861781] usb usb6: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 0.861784] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.861903] hub 6-0:1.0: USB hub found
[ 0.861910] hub 6-0:1.0: 2 ports detected
[ 0.862083] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.862092] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.862099] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.862117] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f900
[ 0.862161] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.862163] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.862166] usb usb7: Product: UHCI Host Controller
[ 0.862168] usb usb7: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 0.862170] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.862286] hub 7-0:1.0: USB hub found
[ 0.862293] hub 7-0:1.0: 2 ports detected
[ 0.862463] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.862470] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.862476] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.862493] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f800
[ 0.862537] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.862539] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.862542] usb usb8: Product: UHCI Host Controller
[ 0.862544] usb usb8: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 0.862546] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.862671] hub 8-0:1.0: USB hub found
[ 0.862678] hub 8-0:1.0: 2 ports detected
[ 0.862834] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.863183] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.863189] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.863348] mousedev: PS/2 mouse device common for all mice
[ 0.863501] rtc_cmos 00:01: RTC can wake from S4
[ 0.863617] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.863639] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.863648] i2c /dev entries driver
[ 0.863717] device-mapper: uevent: version 1.0.3
[ 0.863798] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.863817] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.864210] NET: Registered protocol family 10
[ 0.864419] NET: Registered protocol family 17
[ 0.864434] Key type dns_resolver registered
[ 0.864636] microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb6
[ 0.864645] microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb6
[ 0.864685] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.864860] registered taskstats version 1
[ 0.864874] Loading compiled-in X.509 certificates
[ 0.866046] Loaded X.509 cert 'Build time autogenerated kernel key: 181cd957879f68b474ab1d0c92722cd44e756f77'
[ 0.866066] zswap: loaded using pool lzo/zbud
[ 0.868316] Key type trusted registered
[ 0.872008] Key type encrypted registered
[ 0.872015] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.872020] ima: No TPM chip found, activating TPM-bypass!
[ 0.872053] evm: HMAC attrs: 0x1
[ 0.872290] Magic number: 0:737:337
[ 0.872329] thermal thermal_zone0: hash matches
[ 0.872338] tty tty58: hash matches
[ 0.872407] rtc_cmos 00:01: setting system clock to 2016-09-10 16:18:44 UTC (1473524324)
[ 0.872845] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.872847] EDD information not available.
[ 0.872907] PM: Hibernation image not present or could not be loaded.
[ 1.154599] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.165187] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.172022] usb 2-5: new high-speed USB device number 2 using ehci-pci
[ 1.300028] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 1.363112] usb 2-5: New USB device found, idVendor=0644, idProduct=0200
[ 1.363115] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.363118] usb 2-5: Product: CA-200
[ 1.363121] usb 2-5: Manufacturer: TEAC
[ 1.363123] usb 2-5: SerialNumber: 00000210FD5C
[ 1.475045] usb 4-1: New USB device found, idVendor=413c, idProduct=3012
[ 1.475048] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.475051] usb 4-1: Product: Dell USB Optical Mouse
[ 1.475054] usb 4-1: Manufacturer: Dell
[ 1.620129] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.620140] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.632068] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.632080] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.632090] ata2.01: link offline, clearing class 3 to NONE
[ 1.640129] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-H73N, B103, max UDMA/100
[ 1.656130] ata2.00: configured for UDMA/100
[ 1.660509] ata1.00: ATA-8: WDC WD5000AAKS-75YGA0, 12.01C02, max UDMA/133
[ 1.660512] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.676596] ata1.00: configured for UDMA/133
[ 1.676735] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-7 1C02 PQ: 0 ANSI: 5
[ 1.676922] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.676959] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.676982] sd 0:0:0:0: [sda] Write Protect is off
[ 1.676985] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.677021] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.678570] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H73N B103 PQ: 0 ANSI: 5
[ 1.685534] sda: sda1 sda2 < sda5 >
[ 1.685873] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.686311] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.686314] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.686446] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.686520] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.688201] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[ 1.688204] Write protecting the kernel read-only data: 14336k
[ 1.688970] Freeing unused kernel memory: 1832K (ffff880001836000 - ffff880001a00000)
[ 1.689437] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[ 1.700641] random: systemd-udevd urandom read with 11 bits of entropy available
[ 1.760630] [drm] Initialized drm 1.1.0 20060810
[ 1.767500] pps_core: LinuxPPS API ver. 1 registered
[ 1.767504] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.769457] PTP clock support registered
[ 1.774869] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.774873] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.775063] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.793981] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.808035] tsc: Refined TSC clocksource calibration: 2327.499 MHz
[ 1.808040] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x218cae85130, max_idle_ns: 440795262788 ns
[ 1.816035] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 1.871680] FDC 0 is a post-1991 82077
[ 1.877031] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.892326] usbcore: registered new interface driver usbhid
[ 1.892330] usbhid: USB HID core driver
[ 1.897154] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 1.902266] scsi host4: usb-storage 2-5:1.0
[ 1.902376] usbcore: registered new interface driver usb-storage
[ 1.904068] usbcore: registered new interface driver uas
[ 1.964541] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1a:a0:9c:dd:0d
[ 1.964546] e1000e 0000:00:19.0 eth0: Intel(R) PRO/10/100 Network Connection
[ 1.964571] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 7, PBA No: FFFFFF-0FF
[ 1.965334] [drm] Memory usable by graphics device = 512M
[ 1.965337] [drm] Replacing VGA console driver
[ 1.965999] Console: switching to colour dummy device 80x25
[ 2.017061] usb 5-1: New USB device found, idVendor=046d, idProduct=092f
[ 2.017066] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.017069] usb 5-1: Product: Camera
[ 2.017071] usb 5-1: Manufacturer:
[ 2.024124] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.024127] [drm] Driver supports precise vblank timestamp query.
[ 2.024799] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.025822] [drm] initialized overlay support
[ 2.025906] [drm:intel_opregion_init [i915]] *ERROR* No ACPI video bus found
[ 2.025954] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 2.117093] fbcon: inteldrmfb (fb0) is primary device
[ 2.124210] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:413C:3012.0001/input/input5
[ 2.124357] hid-generic 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1a.1-1/input0
[ 2.274188] Console: switching to colour frame buffer device 210x65
[ 2.279113] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.464049] usb 5-2: new low-speed USB device number 3 using uhci_hcd
[ 2.638050] usb 5-2: New USB device found, idVendor=413c, idProduct=2003
[ 2.638054] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.638057] usb 5-2: Product: Dell USB Keyboard
[ 2.638060] usb 5-2: Manufacturer: Dell
[ 2.656534] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:413C:2003.0002/input/input6
[ 2.712197] hid-generic 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.2-2/input0
[ 2.808067] clocksource: Switched to clocksource tsc
[ 2.910252] scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.12 PQ: 0 ANSI: 0
[ 2.913745] scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.12 PQ: 0 ANSI: 0
[ 2.917370] scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.12 PQ: 0 ANSI: 0
[ 2.920622] scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.12 PQ: 0 ANSI: 0
[ 2.920951] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.921587] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 2.921781] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 2.921959] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 3.164007] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 3.168493] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3.172865] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 3.177492] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 8.249198] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 8.752217] random: nonblocking pool is initialized
[ 9.657369] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 9.657501] systemd[1]: Detected architecture x86-64.
[ 9.666023] systemd[1]: Set hostname to <michel-Inspiron-530>.
[ 13.769135] systemd[1]: Listening on Syslog Socket.
[ 13.769332] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 13.769381] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.769427] systemd[1]: Listening on Journal Socket.
[ 13.769448] systemd[1]: Reached target Remote File Systems (Pre).
[ 13.769479] systemd[1]: Listening on Journal Socket (/dev/log).
[ 13.769585] systemd[1]: Created slice User and Session Slice.
[ 13.769621] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 13.769654] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 13.769728] systemd[1]: Listening on Journal Audit Socket.
[ 13.769767] systemd[1]: Listening on udev Control Socket.
[ 13.769846] systemd[1]: Created slice System Slice.
[ 13.780155] systemd[1]: Started Read required files in advance.
[ 13.948160] systemd[1]: Started Braille Device Support.
[ 14.076138] systemd[1]: Starting Load Kernel Modules...
[ 14.076779] systemd[1]: Starting Set console keymap...
[ 14.077440] systemd[1]: Mounting Debug File System...
[ 14.077498] systemd[1]: Reached target Slices.
[ 14.077534] systemd[1]: Reached target User and Group Name Lookups.
[ 14.077684] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 14.077741] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 14.078300] systemd[1]: Mounting Huge Pages File System...
[ 14.078962] systemd[1]: Mounting POSIX Message Queue File System...
[ 14.079047] systemd[1]: Listening on udev Kernel Socket.
[ 14.079122] systemd[1]: Listening on LVM2 poll daemon socket.
[ 14.079149] systemd[1]: Reached target Encrypted Volumes.
[ 14.079834] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 14.079903] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 14.080510] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 14.081182] systemd[1]: Starting Uncomplicated firewall...
[ 14.081214] systemd[1]: Reached target Remote File Systems.
[ 14.081944] systemd[1]: Starting Journal Service...
[ 14.545575] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 14.556328] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 14.619670] systemd[1]: Started Uncomplicated firewall.
[ 14.961789] systemd[1]: Mounted Debug File System.
[ 14.961832] systemd[1]: Mounted POSIX Message Queue File System.
[ 14.961854] systemd[1]: Mounted Huge Pages File System.
[ 15.276718] lp: driver loaded but no devices found
[ 15.401103] ppdev: user-space parallel port driver
[ 15.633871] systemd[1]: Started Load Kernel Modules.
[ 15.644146] systemd[1]: Mounting FUSE Control File System...
[ 15.644786] systemd[1]: Starting Apply Kernel Variables...
[ 15.647585] systemd[1]: Mounted FUSE Control File System.
[ 15.861253] systemd[1]: Started Journal Service.
[ 20.792858] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 21.278319] systemd-journald[791]: Received request to flush runtime journal from PID 1
[ 22.173042] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000429-0x0000000000000429 (\PM2S) (20150930/utaddress-254)
[ 22.173049] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.173053] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x00000000000004B8-0x00000000000004BB (\GPO2) (20150930/utaddress-254)
[ 22.173057] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.173059] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048C-0x000000000000048F (\GPO_) (20150930/utaddress-254)
[ 22.173063] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.173065] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 22.247962] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.304246] dell_smm_hwmon: unable to get SMM Dell signature
[ 23.677621] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 24.066300] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 24.066306] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.066309] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 24.066311] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 24.066314] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 24.066317] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 24.066319] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 24.066322] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 24.080427] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 24.080510] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 24.080588] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 24.080663] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 24.080737] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 24.080811] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 24.080886] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 24.080960] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 24.210506] coretemp coretemp.0: Using relative temperature scale!
[ 24.210521] coretemp coretemp.0: Using relative temperature scale!
[ 25.864168] media: Linux media interface: v0.10
[ 26.045025] Linux video capture interface: v2.00
[ 26.180500] gspca_main: v2.14.0 registered
[ 26.245894] gspca_main: spca561-2.14.0 probing 046d:092f
[ 26.302142] input: spca561 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/input/input15
[ 26.302284] usbcore: registered new interface driver spca561
[ 28.680339] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 28.813143] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 28.814538] Adding 2084860k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:2084860k FS
[ 38.641609] audit: type=1400 audit(1473524362.263:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2057 comm="apparmor_parser"
[ 38.641620] audit: type=1400 audit(1473524362.263:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2057 comm="apparmor_parser"
[ 38.641627] audit: type=1400 audit(1473524362.263:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2057 comm="apparmor_parser"
[ 38.641633] audit: type=1400 audit(1473524362.263:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2057 comm="apparmor_parser"
[ 38.642517] audit: type=1400 audit(1473524362.263:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=2056 comm="apparmor_parser"
[ 38.642527] audit: type=1400 audit(1473524362.263:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=2056 comm="apparmor_parser"
[ 38.688794] audit: type=1400 audit(1473524362.311:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=2058 comm="apparmor_parser"
[ 38.688807] audit: type=1400 audit(1473524362.311:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=2058 comm="apparmor_parser"
[ 38.688813] audit: type=1400 audit(1473524362.311:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=2058 comm="apparmor_parser"
[ 38.688820] audit: type=1400 audit(1473524362.311:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=2058 comm="apparmor_parser"
[ 38.892522] cgroup: new mount options do not match the existing superblock, will be ignored
[ 43.698246] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 43.888179] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.612768] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 45.612775] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 45.612807] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes readyEt pour systemd-analyze blame :
michel@michel-Inspiron-530:~$ systemd-analyze blame
11.830s dev-mapper-ubuntu\x2d\x2dvg\x2droot.device
9.877s apparmor.service
9.498s plymouth-read-write.service
8.380s NetworkManager-wait-online.service
3.613s systemd-udevd.service
3.582s snapd.firstboot.service
3.269s NetworkManager.service
3.160s lvm2-monitor.service
2.865s systemd-fsck@dev-disk-by\x2duuid-3c1e507e\x2dc4d4\x2d4506\x2db8
2.831s thermald.service
2.776s nmbd.service
2.690s accounts-daemon.service
2.631s samba-ad-dc.service
2.630s ModemManager.service
2.415s systemd-tmpfiles-setup-dev.service
2.313s grub-common.service
2.031s keyboard-setup.service
1.779s systemd-journald.service
1.713s console-setup.service
1.557s systemd-modules-load.service
1.395s gpu-manager.service
1.284s systemd-tmpfiles-setup.service
1.117s lightdm.service
1.059s colord.service
1.008s networking.service
959ms apport.service
916ms rsyslog.service
884ms sys-kernel-debug.mount
883ms dev-hugepages.mount
...skipping...
464ms dev-disk-by\x2duuid-de52eca9\x2d7541\x2d4796\x2db7e3\x2d81bebb8
435ms systemd-journal-flush.service
371ms smbd.service
350ms systemd-random-seed.service
301ms systemd-update-utmp.service
295ms systemd-localed.service
260ms polkitd.service
219ms resolvconf.service
198ms boot.mount
193ms systemd-timesyncd.service
185ms systemd-remount-fs.service
142ms plymouth-start.service
72ms setvtrgb.service
62ms snapd.socket
61ms snapd.boot-ok.service
49ms systemd-hostnamed.service
48ms user@1000.service
9ms systemd-update-utmp-runlevel.service
7ms ureadahead-stop.service
5ms rtkit-daemon.service
3ms sys-fs-fuse-connections.mount
3ms plymouth-quit-wait.service
2ms rc-local.service
...skipping...
464ms dev-disk-by\x2duuid-de52eca9\x2d7541\x2d4796\x2db7e3\x2d81bebb8
435ms systemd-journal-flush.service
371ms smbd.service
350ms systemd-random-seed.service
301ms systemd-update-utmp.service
295ms systemd-localed.service
260ms polkitd.service
219ms resolvconf.service
198ms boot.mount
193ms systemd-timesyncd.service
185ms systemd-remount-fs.service
142ms plymouth-start.service
72ms setvtrgb.service
62ms snapd.socket
61ms snapd.boot-ok.service
49ms systemd-hostnamed.service
48ms user@1000.service
9ms systemd-update-utmp-runlevel.service
7ms ureadahead-stop.service
5ms rtkit-daemon.service
3ms sys-fs-fuse-connections.mount
3ms plymouth-quit-wait.service
2ms rc-local.service
lines 46-68/68 (END)Merci.
Hors ligne
#4 Le 12/09/2016, à 12:10
- MC44
Re : démarrage trés lent d'ubuntu 16.04 LTS
Suite à la demande de "Bougron", j'ai envoyé les données mais depuis pas de réponse...
Ces données sont peut-être incomplètes ou complexes...
Un petit signe de vie me permettra d'avance en complétant par d'autres infos si nécessaire.
Merci d'avance.
Hors ligne
#5 Le 12/09/2016, à 12:53
- Bougron
Re : démarrage trés lent d'ubuntu 16.04 LTS
Bonjour
Tout simplement, je n'ai pas d'idée sur le démarrage de ubuntu pour savoir ce qui se passe après la 45eme seconde qui est la fin du boot
[ 45.612807] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes readyDernière modification par Bougron (Le 12/09/2016, à 12:54)
Hors ligne
#6 Le 12/09/2016, à 14:26
- MC44
Re : démarrage trés lent d'ubuntu 16.04 LTS
j'ai relancé la procedure et j'obtiens le résultat effectivement différent que voici :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-36-generic (buildd@lcy01-01) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #55-Ubuntu SMP Thu Aug 11 18:01:55 UTC 2016 (Ubuntu 4.4.0-36.55-generic 4.4.16)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4.0-36-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f58ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f590000-0x000000007f5e2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f5e3000-0x000000007f5effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f5f0000-0x000000007f5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Dell Inc. Inspiron 530/0RY007, BIOS 1.0.18 02/24/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7f590 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CAFFF write-protect
[ 0.000000] CB000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 base 07F600000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 2038MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 2038M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2038MB, range: 2MB, type UC
[ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000f3f00-0x000f3f0f] mapped at [ffff8800000f3f00]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33908000-0x35c7bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F97A0 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x000000007F5E3080 00005C (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x000000007F5E7200 0000F4 (v03 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20150930/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20150930/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20150930/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/8 (20150930/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20150930/tbfadt-704)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20150930/tbfadt-704)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20150930/tbfadt-704)
[ 0.000000] ACPI: DSDT 0x000000007F5E3200 003FFC (v01 DELL AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x000000007F590000 000040
[ 0.000000] ACPI: FACS 0x000000007F590000 000040
[ 0.000000] ACPI: HPET 0x000000007F5E73C0 000038 (v01 DELL FX09 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 0x000000007F5E7400 00003C (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SLIC 0x000000007F5E7440 000176 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DMY2 0x000000007F5E75C0 000080 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 0x000000007F5E7300 000084 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 0x000000007F5E7CA0 000380 (v01 PmRef CpuPm 00003000 INTL 20041203)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f58ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x7f58b000-0x7f58ffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007f58ffff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f58ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f58ffff]
[ 0.000000] On node 0 totalpages: 521517
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8087 pages used for memmap
[ 0.000000] DMA32 zone: 517520 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x7f800000-0x7fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88007f200000 s98008 r8192 d28968 u524288
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513345
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-36-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1997656K/2086068K available (8394K kernel code, 1282K rwdata, 3944K rodata, 1480K init, 1292K bss, 88412K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2327.300 MHz processor
[ 0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4654.60 BogoMIPS (lpj=9309200)
[ 0.004016] pid_max: default: 32768 minimum: 301
[ 0.004022] ACPI: Core revision 20150930
[ 0.011055] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.011083] Security Framework initialized
[ 0.011086] Yama: becoming mindful.
[ 0.011109] AppArmor: AppArmor initialized
[ 0.011305] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012202] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.012670] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.012675] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.012978] Initializing cgroup subsys io
[ 0.012984] Initializing cgroup subsys memory
[ 0.012995] Initializing cgroup subsys devices
[ 0.012998] Initializing cgroup subsys freezer
[ 0.013003] Initializing cgroup subsys net_cls
[ 0.013006] Initializing cgroup subsys perf_event
[ 0.013010] Initializing cgroup subsys net_prio
[ 0.013013] Initializing cgroup subsys hugetlb
[ 0.013018] Initializing cgroup subsys pids
[ 0.013043] CPU: Physical Processor ID: 0
[ 0.013045] CPU: Processor Core ID: 0
[ 0.013047] mce: CPU supports 6 MCE banks
[ 0.013056] CPU0: Thermal monitoring enabled (TM2)
[ 0.013060] process: using mwait in idle threads
[ 0.013066] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.013068] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.013419] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000)
[ 0.016008] ftrace: allocating 31996 entries in 125 pages
[ 0.028117] smpboot: Max logical packages: 2
[ 0.028122] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.028489] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (family: 0x6, model: 0xf, stepping: 0xb)
[ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.072000] core: PEBS disabled due to CPU errata
[ 0.072000] ... version: 2
[ 0.072000] ... bit width: 40
[ 0.072000] ... generic registers: 2
[ 0.072000] ... value mask: 000000ffffffffff
[ 0.072000] ... max period: 000000007fffffff
[ 0.072000] ... fixed-purpose events: 3
[ 0.072000] ... event mask: 0000000700000003
[ 0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072000] x86: Booting SMP configuration:
[ 0.072000] .... node #0, CPUs: #1
[ 0.072000] x86: Booted up 1 node, 2 CPUs
[ 0.072000] smpboot: Total of 2 processors activated (9309.20 BogoMIPS)
[ 0.072120] devtmpfs: initialized
[ 0.073418] evm: security.selinux
[ 0.073420] evm: security.SMACK64
[ 0.073421] evm: security.SMACK64EXEC
[ 0.073423] evm: security.SMACK64TRANSMUTE
[ 0.073424] evm: security.SMACK64MMAP
[ 0.073425] evm: security.ima
[ 0.073426] evm: security.capability
[ 0.076037] PM: Registering ACPI NVS region [mem 0x7f590000-0x7f5e2fff] (339968 bytes)
[ 0.076129] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.076171] pinctrl core: initialized pinctrl subsystem
[ 0.076179] RTC time: 9:16:51, date: 09/12/16
[ 0.076302] NET: Registered protocol family 16
[ 0.084006] cpuidle: using governor ladder
[ 0.092004] cpuidle: using governor menu
[ 0.092009] PCCT header not found.
[ 0.092079] ACPI: bus type PCI registered
[ 0.092082] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.092168] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.092172] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.092192] PCI: Using configuration type 1 for base access
[ 0.104097] ACPI: Added _OSI(Module Device)
[ 0.104100] ACPI: Added _OSI(Processor Device)
[ 0.104102] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.104103] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.107696] ACPI: Dynamic OEM Table Load:
[ 0.107703] ACPI: SSDT 0xFFFF88007C88FC00 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
[ 0.108095] ACPI: Dynamic OEM Table Load:
[ 0.108101] ACPI: SSDT 0xFFFF88007C232600 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
[ 0.108418] ACPI: Interpreter enabled
[ 0.108424] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.108429] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.108444] ACPI: (supports S0 S3 S4 S5)
[ 0.108446] ACPI: Using IOAPIC for interrupt routing
[ 0.108470] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.112637] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.112644] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.112649] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.112893] PCI host bridge to bus 0000:00
[ 0.112897] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.112900] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.112902] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.112905] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.112907] pci_bus 0000:00: root bus resource [mem 0x7f600000-0xfebfffff window]
[ 0.112910] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.112919] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.113031] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.113069] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.113156] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
[ 0.113169] pci 0000:00:02.0: reg 0x10: [mem 0xfdf00000-0xfdf7ffff]
[ 0.113175] pci 0000:00:02.0: reg 0x14: [io 0xff00-0xff07]
[ 0.113180] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.113185] pci 0000:00:02.0: reg 0x1c: [mem 0xfdb00000-0xfdbfffff]
[ 0.113310] pci 0000:00:19.0: [8086:10c0] type 00 class 0x020000
[ 0.113333] pci 0000:00:19.0: reg 0x10: [mem 0xfdfc0000-0xfdfdffff]
[ 0.113341] pci 0000:00:19.0: reg 0x14: [mem 0xfdfff000-0xfdffffff]
[ 0.113349] pci 0000:00:19.0: reg 0x18: [io 0xfe00-0xfe1f]
[ 0.113396] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.113444] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.113497] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.113540] pci 0000:00:1a.0: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.113613] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.113665] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.113708] pci 0000:00:1a.1: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.113781] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.113831] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.113874] pci 0000:00:1a.2: reg 0x20: [io 0xfb00-0xfb1f]
[ 0.113946] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.114003] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.114030] pci 0000:00:1a.7: reg 0x10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.114098] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.114148] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.114201] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.114225] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
[ 0.114281] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.114331] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.114381] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.114424] pci 0000:00:1d.0: reg 0x20: [io 0xfa00-0xfa1f]
[ 0.114497] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.114547] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.114591] pci 0000:00:1d.1: reg 0x20: [io 0xf900-0xf91f]
[ 0.114663] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.114712] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.114755] pci 0000:00:1d.2: reg 0x20: [io 0xf800-0xf81f]
[ 0.114828] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.114883] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.114910] pci 0000:00:1d.7: reg 0x10: [mem 0xfdffd000-0xfdffd3ff]
[ 0.114978] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.115027] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.115078] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.115163] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.115215] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[ 0.115295] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.115300] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.115304] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[ 0.115307] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
[ 0.115410] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
[ 0.115429] pci 0000:00:1f.2: reg 0x10: [io 0xf700-0xf707]
[ 0.115436] pci 0000:00:1f.2: reg 0x14: [io 0xf600-0xf603]
[ 0.115444] pci 0000:00:1f.2: reg 0x18: [io 0xf500-0xf507]
[ 0.115451] pci 0000:00:1f.2: reg 0x1c: [io 0xf400-0xf403]
[ 0.115459] pci 0000:00:1f.2: reg 0x20: [io 0xf300-0xf30f]
[ 0.115466] pci 0000:00:1f.2: reg 0x24: [io 0xf200-0xf20f]
[ 0.115572] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.115588] pci 0000:00:1f.3: reg 0x10: [mem 0xfdffc000-0xfdffc0ff 64bit]
[ 0.115607] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.115709] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[ 0.115728] pci 0000:00:1f.5: reg 0x10: [io 0xf000-0xf007]
[ 0.115735] pci 0000:00:1f.5: reg 0x14: [io 0xef00-0xef03]
[ 0.115743] pci 0000:00:1f.5: reg 0x18: [io 0xee00-0xee07]
[ 0.115750] pci 0000:00:1f.5: reg 0x1c: [io 0xed00-0xed03]
[ 0.115758] pci 0000:00:1f.5: reg 0x20: [io 0xec00-0xec0f]
[ 0.115765] pci 0000:00:1f.5: reg 0x24: [io 0xeb00-0xeb0f]
[ 0.115902] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.115905] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.115908] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.115913] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.115986] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.115990] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.115994] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.116003] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.116005] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.116008] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.116010] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.116013] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.116015] pci 0000:00:1e.0: bridge window [mem 0x7f600000-0xfebfffff window] (subtractive decode)
[ 0.116510] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.116572] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.116635] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.116699] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.116760] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.116821] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.116882] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.116943] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 0.117042] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.117145] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.117145] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.117145] vgaarb: loaded
[ 0.117145] vgaarb: bridge control possible 0000:00:02.0
[ 0.117145] SCSI subsystem initialized
[ 0.117145] libata version 3.00 loaded.
[ 0.117145] ACPI: bus type USB registered
[ 0.117145] usbcore: registered new interface driver usbfs
[ 0.117145] usbcore: registered new interface driver hub
[ 0.117145] usbcore: registered new device driver usb
[ 0.117145] PCI: Using ACPI for IRQ routing
[ 0.123078] PCI: pci_cache_line_size set to 64 bytes
[ 0.123118] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.123120] e820: reserve RAM buffer [mem 0x7f590000-0x7fffffff]
[ 0.123257] NetLabel: Initializing
[ 0.123259] NetLabel: domain hash size = 128
[ 0.123260] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.123278] NetLabel: unlabeled traffic allowed by default
[ 0.123305] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.123305] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.123305] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.125013] amd_nb: Cannot enumerate AMD northbridges
[ 0.125013] clocksource: Switched to clocksource hpet
[ 0.133008] AppArmor: AppArmor Filesystem Enabled
[ 0.133101] pnp: PnP ACPI init
[ 0.133305] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.133308] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.133311] system 00:00: [io 0x0290-0x0297] has been reserved
[ 0.133313] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.133319] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133407] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.133552] pnp 00:02: [dma 2]
[ 0.133590] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.133688] system 00:03: [io 0x0400-0x04bf] could not be reserved
[ 0.133692] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.133914] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.133918] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134027] system 00:05: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.134030] system 00:05: [mem 0x7f600000-0x7f6fffff] has been reserved
[ 0.134033] system 00:05: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.134035] system 00:05: [mem 0x7f590000-0x7f5fffff] could not be reserved
[ 0.134038] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.134041] system 00:05: [mem 0x00100000-0x7f58ffff] could not be reserved
[ 0.134044] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.134046] system 00:05: [mem 0xfed14000-0xfed1dfff] has been reserved
[ 0.134049] system 00:05: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.134052] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.134054] system 00:05: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.134057] system 00:05: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.134059] system 00:05: [mem 0x000e0000-0x000effff] has been reserved
[ 0.134063] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.134071] pnp: PnP ACPI: found 6 devices
[ 0.140946] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.140969] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.140973] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.140977] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.140980] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.140985] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.140988] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.140993] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.140996] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.141003] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.141005] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.141008] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.141010] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.141012] pci_bus 0000:00: resource 8 [mem 0x7f600000-0xfebfffff window]
[ 0.141015] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.141017] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.141019] pci_bus 0000:01: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.141022] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.141024] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.141026] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.141028] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
[ 0.141031] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
[ 0.141033] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.141035] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.141038] pci_bus 0000:02: resource 8 [mem 0x7f600000-0xfebfffff window]
[ 0.141075] NET: Registered protocol family 2
[ 0.141276] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.141339] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.141431] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.141477] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.141491] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.141549] NET: Registered protocol family 1
[ 0.141568] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.142644] PCI: CLS 64 bytes, default 64
[ 0.142703] Trying to unpack rootfs image as initramfs...
[ 0.810718] Freeing initrd memory: 36304K (ffff880033908000 - ffff880035c7c000)
[ 0.810971] Scanning for low memory corruption every 60 seconds
[ 0.811413] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.811466] audit: initializing netlink subsys (disabled)
[ 0.811496] audit: type=2000 audit(1473671811.808:1): initialized
[ 0.811887] Initialise system trusted keyring
[ 0.812053] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.814287] zbud: loaded
[ 0.814500] VFS: Disk quotas dquot_6.6.0
[ 0.814549] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.814934] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.815262] fuse init (API version 7.23)
[ 0.815442] Key type big_key registered
[ 0.815463] Allocating IMA MOK and blacklist keyrings.
[ 0.815832] Key type asymmetric registered
[ 0.815836] Asymmetric key parser 'x509' registered
[ 0.815887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.815917] io scheduler noop registered
[ 0.815920] io scheduler deadline registered (default)
[ 0.815963] io scheduler cfq registered
[ 0.816291] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.816300] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.816337] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.816339] vesafb: scrolling: redraw
[ 0.816341] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.816357] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 5120k, total 5120k
[ 0.816481] Console: switching to colour frame buffer device 160x64
[ 0.816516] fb0: VESA VGA frame buffer device
[ 0.816537] intel_idle: does not run on family 6 model 15
[ 0.816628] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.816633] ACPI: Power Button [PWRB]
[ 0.816694] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.816696] ACPI: Power Button [PWRF]
[ 0.817244] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.817246] ACPI: Thermal Zone [THRM] (40 C)
[ 0.817288] GHES: HEST is not enabled!
[ 0.817388] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.819221] Linux agpgart interface v0.103
[ 0.819291] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[ 0.819307] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.820171] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.820290] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.823610] brd: module loaded
[ 0.824968] loop: module loaded
[ 0.825154] ata_piix 0000:00:1f.2: version 2.13
[ 0.825268] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.826022] scsi host0: ata_piix
[ 0.826128] scsi host1: ata_piix
[ 0.826186] ata1: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[ 0.826190] ata2: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[ 0.826270] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.826691] scsi host2: ata_piix
[ 0.826782] scsi host3: ata_piix
[ 0.826837] ata3: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xec00 irq 19
[ 0.826840] ata4: SATA max UDMA/133 cmd 0xee00 ctl 0xed00 bmdma 0xec08 irq 19
[ 0.826962] libphy: Fixed MDIO Bus: probed
[ 0.826966] tun: Universal TUN/TAP device driver, 1.6
[ 0.826967] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.827022] PPP generic driver version 2.4.2
[ 0.827092] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.827098] ehci-pci: EHCI PCI platform driver
[ 0.827204] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.827214] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.827225] ehci-pci 0000:00:1a.7: debug port 1
[ 0.831130] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.831142] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdffe000
[ 0.840027] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.840077] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.840081] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.840084] usb usb1: Product: EHCI Host Controller
[ 0.840086] usb usb1: Manufacturer: Linux 4.4.0-36-generic ehci_hcd
[ 0.840089] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.840242] hub 1-0:1.0: USB hub found
[ 0.840250] hub 1-0:1.0: 6 ports detected
[ 0.840512] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.840519] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.840530] ehci-pci 0000:00:1d.7: debug port 1
[ 0.844435] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.844447] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffd000
[ 0.856042] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.856094] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.856098] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.856100] usb usb2: Product: EHCI Host Controller
[ 0.856103] usb usb2: Manufacturer: Linux 4.4.0-36-generic ehci_hcd
[ 0.856105] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.856245] hub 2-0:1.0: USB hub found
[ 0.856252] hub 2-0:1.0: 6 ports detected
[ 0.856427] ehci-platform: EHCI generic platform driver
[ 0.856442] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.856446] ohci-pci: OHCI PCI platform driver
[ 0.856460] ohci-platform: OHCI generic platform driver
[ 0.856470] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.856553] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.856559] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.856566] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.856589] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fd00
[ 0.856634] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.856637] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.856639] usb usb3: Product: UHCI Host Controller
[ 0.856642] usb usb3: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 0.856644] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.856759] hub 3-0:1.0: USB hub found
[ 0.856766] hub 3-0:1.0: 2 ports detected
[ 0.856944] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.856952] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.856959] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.856981] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fc00
[ 0.857026] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.857028] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.857031] usb usb4: Product: UHCI Host Controller
[ 0.857033] usb usb4: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 0.857035] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.857154] hub 4-0:1.0: USB hub found
[ 0.857161] hub 4-0:1.0: 2 ports detected
[ 0.857334] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.857341] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.857347] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.857364] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fb00
[ 0.857409] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.857412] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.857414] usb usb5: Product: UHCI Host Controller
[ 0.857416] usb usb5: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 0.857419] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.857532] hub 5-0:1.0: USB hub found
[ 0.857541] hub 5-0:1.0: 2 ports detected
[ 0.857711] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.857717] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.857723] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.857741] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fa00
[ 0.857785] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.857788] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.857790] usb usb6: Product: UHCI Host Controller
[ 0.857792] usb usb6: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 0.857794] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.857917] hub 6-0:1.0: USB hub found
[ 0.857924] hub 6-0:1.0: 2 ports detected
[ 0.858097] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.858104] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.858110] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.858127] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f900
[ 0.858172] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.858175] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.858177] usb usb7: Product: UHCI Host Controller
[ 0.858179] usb usb7: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 0.858181] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.858298] hub 7-0:1.0: USB hub found
[ 0.858305] hub 7-0:1.0: 2 ports detected
[ 0.858476] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.858483] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.858489] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.858507] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f800
[ 0.858551] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.858554] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.858556] usb usb8: Product: UHCI Host Controller
[ 0.858559] usb usb8: Manufacturer: Linux 4.4.0-36-generic uhci_hcd
[ 0.858561] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.858674] hub 8-0:1.0: USB hub found
[ 0.858681] hub 8-0:1.0: 2 ports detected
[ 0.858839] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.859184] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.859189] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.859343] mousedev: PS/2 mouse device common for all mice
[ 0.859496] rtc_cmos 00:01: RTC can wake from S4
[ 0.859613] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.859635] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.859644] i2c /dev entries driver
[ 0.859718] device-mapper: uevent: version 1.0.3
[ 0.859798] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.859818] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.860208] NET: Registered protocol family 10
[ 0.860416] NET: Registered protocol family 17
[ 0.860432] Key type dns_resolver registered
[ 0.860643] microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb6
[ 0.860650] microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb6
[ 0.860690] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.860864] registered taskstats version 1
[ 0.860879] Loading compiled-in X.509 certificates
[ 0.862049] Loaded X.509 cert 'Build time autogenerated kernel key: 181cd957879f68b474ab1d0c92722cd44e756f77'
[ 0.862069] zswap: loaded using pool lzo/zbud
[ 0.864288] Key type trusted registered
[ 0.867988] Key type encrypted registered
[ 0.867994] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.867999] ima: No TPM chip found, activating TPM-bypass!
[ 0.868037] evm: HMAC attrs: 0x1
[ 0.868270] Magic number: 0:592:272
[ 0.868380] rtc_cmos 00:01: setting system clock to 2016-09-12 09:16:52 UTC (1473671812)
[ 0.868820] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.868822] EDD information not available.
[ 0.868881] PM: Hibernation image not present or could not be loaded.
[ 1.154607] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.165215] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.168018] usb 2-5: new high-speed USB device number 2 using ehci-pci
[ 1.296028] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 1.358989] usb 2-5: New USB device found, idVendor=0644, idProduct=0200
[ 1.358993] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.358996] usb 2-5: Product: CA-200
[ 1.358998] usb 2-5: Manufacturer: TEAC
[ 1.359001] usb 2-5: SerialNumber: 00000210FD5C
[ 1.471041] usb 4-1: New USB device found, idVendor=413c, idProduct=3012
[ 1.471045] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.471047] usb 4-1: Product: Dell USB Optical Mouse
[ 1.471050] usb 4-1: Manufacturer: Dell
[ 1.608043] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 1.628111] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.628122] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.636174] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.636191] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.636201] ata2.01: link offline, clearing class 3 to NONE
[ 1.644125] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-H73N, B103, max UDMA/100
[ 1.660130] ata2.00: configured for UDMA/100
[ 1.671236] ata1.00: ATA-8: WDC WD5000AAKS-75YGA0, 12.01C02, max UDMA/133
[ 1.671239] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.685006] ata1.00: configured for UDMA/133
[ 1.685143] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-7 1C02 PQ: 0 ANSI: 5
[ 1.685326] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.685368] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.685384] sd 0:0:0:0: [sda] Write Protect is off
[ 1.685388] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.685427] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.687127] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H73N B103 PQ: 0 ANSI: 5
[ 1.696262] sda: sda1 sda2 < sda5 >
[ 1.696618] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.702334] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.702337] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.702473] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.702546] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.704215] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[ 1.704218] Write protecting the kernel read-only data: 14336k
[ 1.704993] Freeing unused kernel memory: 1832K (ffff880001836000 - ffff880001a00000)
[ 1.705462] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[ 1.716787] random: systemd-udevd urandom read with 11 bits of entropy available
[ 1.765378] pps_core: LinuxPPS API ver. 1 registered
[ 1.765382] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.767002] PTP clock support registered
[ 1.772698] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.772702] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.773365] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.790774] [drm] Initialized drm 1.1.0 20060810
[ 1.808023] tsc: Refined TSC clocksource calibration: 2327.499 MHz
[ 1.808028] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x218cae85130, max_idle_ns: 440795262788 ns
[ 1.810609] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.818500] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.825336] usbcore: registered new interface driver usbhid
[ 1.825339] usbhid: USB HID core driver
[ 1.898075] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 1.900744] scsi host4: usb-storage 2-5:1.0
[ 1.900854] usbcore: registered new interface driver usb-storage
[ 1.902525] usbcore: registered new interface driver uas
[ 1.907706] FDC 0 is a post-1991 82077
[ 1.944243] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1a:a0:9c:dd:0d
[ 1.944249] e1000e 0000:00:19.0 eth0: Intel(R) PRO/10/100 Network Connection
[ 1.944273] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 7, PBA No: FFFFFF-0FF
[ 1.945021] [drm] Memory usable by graphics device = 512M
[ 1.945025] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[ 1.945027] fb: switching to inteldrmfb from VESA VGA
[ 1.945066] Console: switching to colour dummy device 80x25
[ 1.945157] [drm] Replacing VGA console driver
[ 2.005927] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.005930] [drm] Driver supports precise vblank timestamp query.
[ 2.007169] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.009061] usb 5-1: New USB device found, idVendor=046d, idProduct=092f
[ 2.009066] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.009069] usb 5-1: Product: Camera
[ 2.009071] usb 5-1: Manufacturer:
[ 2.024432] [drm] initialized overlay support
[ 2.095538] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:413C:3012.0001/input/input5
[ 2.095873] hid-generic 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1a.1-1/input0
[ 2.110222] [drm:intel_opregion_init [i915]] *ERROR* No ACPI video bus found
[ 2.110291] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 2.117130] fbcon: inteldrmfb (fb0) is primary device
[ 2.117222] Console: switching to colour frame buffer device 210x65
[ 2.117271] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.456027] usb 5-2: new low-speed USB device number 3 using uhci_hcd
[ 2.812076] clocksource: Switched to clocksource tsc
[ 2.834049] usb 5-2: New USB device found, idVendor=413c, idProduct=2003
[ 2.834053] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.834056] usb 5-2: Product: Dell USB Keyboard
[ 2.834058] usb 5-2: Manufacturer: Dell
[ 2.852525] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:413C:2003.0002/input/input6
[ 2.908192] hid-generic 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.2-2/input0
[ 2.910269] scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.12 PQ: 0 ANSI: 0
[ 2.913887] scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.12 PQ: 0 ANSI: 0
[ 2.917385] scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.12 PQ: 0 ANSI: 0
[ 2.920746] scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.12 PQ: 0 ANSI: 0
[ 2.921064] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.921260] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 2.921446] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 2.921627] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 2.943503] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3.161122] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 3.173761] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 3.177887] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 8.682020] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 9.037513] random: nonblocking pool is initialized
[ 10.091356] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 10.091487] systemd[1]: Detected architecture x86-64.
[ 10.099999] systemd[1]: Set hostname to <michel-Inspiron-530>.
[ 14.228023] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 14.228180] systemd[1]: Created slice User and Session Slice.
[ 14.228209] systemd[1]: Listening on LVM2 poll daemon socket.
[ 14.228234] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 14.228246] systemd[1]: Reached target Encrypted Volumes.
[ 14.228257] systemd[1]: Reached target Remote File Systems (Pre).
[ 14.228298] systemd[1]: Listening on udev Control Socket.
[ 14.228325] systemd[1]: Listening on udev Kernel Socket.
[ 14.228361] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 14.228393] systemd[1]: Listening on Syslog Socket.
[ 14.228425] systemd[1]: Listening on Journal Socket (/dev/log).
[ 14.228466] systemd[1]: Listening on Journal Socket.
[ 14.228616] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 14.228699] systemd[1]: Created slice System Slice.
[ 14.240145] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 14.240708] systemd[1]: Started Read required files in advance.
[ 14.464087] systemd[1]: Mounting Huge Pages File System...
[ 14.464167] systemd[1]: Reached target Slices.
[ 14.464782] systemd[1]: Mounting Debug File System...
[ 14.465434] systemd[1]: Started Braille Device Support.
[ 14.465670] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 14.465701] systemd[1]: Reached target Remote File Systems.
[ 14.466242] systemd[1]: Starting Set console keymap...
[ 14.466279] systemd[1]: Reached target User and Group Name Lookups.
[ 14.466373] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 14.467149] systemd[1]: Mounting POSIX Message Queue File System...
[ 14.467821] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 14.712147] systemd[1]: Starting Load Kernel Modules...
[ 14.712248] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 14.712943] systemd[1]: Starting Uncomplicated firewall...
[ 14.713082] systemd[1]: Listening on Journal Audit Socket.
[ 14.713752] systemd[1]: Starting Journal Service...
[ 14.715510] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 14.748164] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 15.153282] systemd[1]: Started Uncomplicated firewall.
[ 15.254061] systemd[1]: Mounted Huge Pages File System.
[ 15.254525] systemd[1]: Mounted Debug File System.
[ 15.254552] systemd[1]: Mounted POSIX Message Queue File System.
[ 15.926472] lp: driver loaded but no devices found
[ 16.017676] ppdev: user-space parallel port driver
[ 16.183998] systemd[1]: Started Load Kernel Modules.
[ 16.196189] systemd[1]: Starting Apply Kernel Variables...
[ 16.196911] systemd[1]: Mounting FUSE Control File System...
[ 16.202208] systemd[1]: Mounted FUSE Control File System.
[ 16.490641] systemd[1]: Started Journal Service.
[ 21.392857] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 21.794615] systemd-journald[783]: Received request to flush runtime journal from PID 1
[ 22.590578] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000429-0x0000000000000429 (\PM2S) (20150930/utaddress-254)
[ 22.590586] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.590590] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x00000000000004B8-0x00000000000004BB (\GPO2) (20150930/utaddress-254)
[ 22.590594] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.590596] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048C-0x000000000000048F (\GPO_) (20150930/utaddress-254)
[ 22.590600] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.590602] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 22.640521] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.837129] dell_smm_hwmon: unable to get SMM Dell signature
[ 24.128527] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 24.442074] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 24.442080] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.442083] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 24.442085] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 24.442087] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 24.442090] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 24.442093] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 24.442095] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 24.456184] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 24.456271] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 24.456348] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 24.456426] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 24.456501] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 24.456578] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 24.456655] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 24.456731] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 24.636215] coretemp coretemp.0: Using relative temperature scale!
[ 24.636229] coretemp coretemp.0: Using relative temperature scale!
[ 26.280500] media: Linux media interface: v0.10
[ 26.418459] Linux video capture interface: v2.00
[ 26.622796] gspca_main: v2.14.0 registered
[ 26.713081] gspca_main: spca561-2.14.0 probing 046d:092f
[ 26.770142] input: spca561 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/input/input15
[ 26.770278] usbcore: registered new interface driver spca561
[ 28.522881] Adding 2084860k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:2084860k FS
[ 28.617322] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 28.666291] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 39.440893] audit: type=1400 audit(1473671851.067:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2045 comm="apparmor_parser"
[ 39.440905] audit: type=1400 audit(1473671851.067:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2045 comm="apparmor_parser"
[ 39.440912] audit: type=1400 audit(1473671851.067:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2045 comm="apparmor_parser"
[ 39.440918] audit: type=1400 audit(1473671851.067:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2045 comm="apparmor_parser"
[ 39.443275] audit: type=1400 audit(1473671851.067:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=2044 comm="apparmor_parser"
[ 39.443285] audit: type=1400 audit(1473671851.067:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=2044 comm="apparmor_parser"
[ 39.488020] audit: type=1400 audit(1473671851.111:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=2046 comm="apparmor_parser"
[ 39.488034] audit: type=1400 audit(1473671851.115:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=2046 comm="apparmor_parser"
[ 39.488041] audit: type=1400 audit(1473671851.115:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=2046 comm="apparmor_parser"
[ 39.488048] audit: type=1400 audit(1473671851.115:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=2046 comm="apparmor_parser"
[ 40.181472] cgroup: new mount options do not match the existing superblock, will be ignored
[ 45.343459] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.528147] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 46.972771] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 46.972779] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 46.972811] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 628.452764] perf interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 995.305617] PM: Syncing filesystems ... done.
[ 995.873899] PM: Preparing system for sleep (mem)
[ 995.874064] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 995.875885] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 995.877044] PM: Suspending system (mem)
[ 995.877080] Suspending console(s) (use no_console_suspend to debug)
[ 995.877962] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 995.878666] e1000e: EEE TX LPI TIMER: 00000000
[ 995.988272] sd 0:0:0:0: [sda] Stopping disk
[ 996.548035] PM: suspend of devices complete after 670.648 msecs
[ 996.564029] PM: late suspend of devices complete after 15.991 msecs
[ 996.564343] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 996.564386] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[ 996.564394] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 996.564440] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 996.564486] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[ 996.564490] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[ 996.564524] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 996.564530] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 996.564578] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 996.580038] PM: noirq suspend of devices complete after 16.006 msecs
[ 996.580453] ACPI: Preparing to enter system sleep state S3
[ 996.580780] PM: Saving platform NVS memory
[ 996.581058] Disabling non-boot CPUs ...
[ 996.581314] Broke affinity for irq 19
[ 996.581317] Broke affinity for irq 21
[ 996.581320] Broke affinity for irq 23
[ 996.581322] Broke affinity for irq 26
[ 996.582337] smpboot: CPU 1 is now offline
[ 996.592251] ACPI: Low-level resume complete
[ 996.592251] PM: Restoring platform NVS memory
[ 996.592251] Enabling non-boot CPUs ...
[ 996.612262] x86: Booting SMP configuration:
[ 996.612264] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 996.614925] cache: parent cpu1 should not be sleeping
[ 996.615139] CPU1 is up
[ 996.616967] ACPI: Waking up from system sleep state S3
[ 996.617520] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 996.617523] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[ 996.617550] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[ 996.617574] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 996.617597] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 996.617621] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[ 996.632114] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 996.636073] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 996.636225] PM: noirq resume of devices complete after 18.942 msecs
[ 996.636455] PM: early resume of devices complete after 0.211 msecs
[ 996.640024] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 996.641762] usb usb3: root hub lost power or was reset
[ 996.641794] usb usb4: root hub lost power or was reset
[ 996.641823] usb usb5: root hub lost power or was reset
[ 996.641938] usb usb6: root hub lost power or was reset
[ 996.641970] usb usb7: root hub lost power or was reset
[ 996.642000] usb usb8: root hub lost power or was reset
[ 996.642813] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 996.656593] sd 0:0:0:0: [sda] Starting disk
[ 996.697083] [drm:intel_opregion_init [i915]] *ERROR* No ACPI video bus found
[ 996.974585] ata3: SATA link down (SStatus 0 SControl 300)
[ 996.985166] ata4: SATA link down (SStatus 0 SControl 300)
[ 996.985168] usb 5-1: reset full-speed USB device number 2 using uhci_hcd
[ 997.132031] usb 4-1: reset low-speed USB device number 2 using uhci_hcd
[ 997.384091] usb 5-2: reset low-speed USB device number 3 using uhci_hcd
[ 997.440093] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 997.440104] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 997.440113] ata2.01: link offline, clearing class 3 to NONE
[ 997.452156] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 997.452158] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 997.452160] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 997.468137] ata2.00: configured for UDMA/100
[ 997.704134] PM: resume of devices complete after 1067.676 msecs
[ 997.704432] PM: Finishing wakeup.
[ 997.704433] Restarting tasks ...
[ 997.704469] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 997.704479] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 997.704483] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 997.704488] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 997.704493] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 997.706495] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 997.706507] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 997.706512] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 997.706517] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 997.706521] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 997.706561] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 997.706566] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 997.706569] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 997.706574] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 997.706578] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 997.706616] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 997.706620] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 997.706623] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 997.706628] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 997.706633] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 997.706668] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 997.706672] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 997.706676] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 997.706681] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 997.706685] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 997.706720] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 997.706724] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 997.706728] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 997.706733] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 997.706737] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 997.707127] done.
[ 998.452793] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 998.452799] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 1002.456039] ata1.00: link is slow to respond, please be patient (ready=0)
[ 1006.168074] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1006.168087] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1006.176146] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 1006.176150] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 1006.176153] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1006.201288] ata1.00: configured for UDMA/133
[ 1010.124064] e1000e: eth0 NIC Link is Down
[ 1010.395852] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1010.592170] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1011.993626] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 1011.993635] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 1011.993674] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4943.691772] PM: Syncing filesystems ... done.
[ 4943.887286] PM: Preparing system for sleep (mem)
[ 4943.887463] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 4943.889992] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4943.891211] PM: Suspending system (mem)
[ 4943.891254] Suspending console(s) (use no_console_suspend to debug)
[ 4943.892197] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4943.892837] e1000e: EEE TX LPI TIMER: 00000000
[ 4944.004266] sd 0:0:0:0: [sda] Stopping disk
[ 4944.576035] PM: suspend of devices complete after 684.457 msecs
[ 4944.592029] PM: late suspend of devices complete after 15.991 msecs
[ 4944.592345] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 4944.592387] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[ 4944.592398] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 4944.592443] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 4944.592487] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[ 4944.592492] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[ 4944.592525] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 4944.592531] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 4944.592579] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 4944.608037] PM: noirq suspend of devices complete after 16.005 msecs
[ 4944.608451] ACPI: Preparing to enter system sleep state S3
[ 4944.608754] PM: Saving platform NVS memory
[ 4944.609040] Disabling non-boot CPUs ...
[ 4944.609275] Broke affinity for irq 1
[ 4944.609288] Broke affinity for irq 12
[ 4944.609297] Broke affinity for irq 19
[ 4944.609300] Broke affinity for irq 21
[ 4944.609304] Broke affinity for irq 23
[ 4944.609306] Broke affinity for irq 26
[ 4944.610321] smpboot: CPU 1 is now offline
[ 4944.620250] ACPI: Low-level resume complete
[ 4944.620250] PM: Restoring platform NVS memory
[ 4944.620250] Enabling non-boot CPUs ...
[ 4944.640262] x86: Booting SMP configuration:
[ 4944.640263] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4944.642939] cache: parent cpu1 should not be sleeping
[ 4944.643159] CPU1 is up
[ 4944.644999] ACPI: Waking up from system sleep state S3
[ 4944.645503] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 4944.645505] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[ 4944.645537] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[ 4944.645557] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 4944.645573] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 4944.645589] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[ 4944.660076] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 4944.664114] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 4944.664250] PM: noirq resume of devices complete after 18.908 msecs
[ 4944.664480] PM: early resume of devices complete after 0.210 msecs
[ 4944.680020] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 4944.681756] usb usb3: root hub lost power or was reset
[ 4944.681788] usb usb4: root hub lost power or was reset
[ 4944.681818] usb usb5: root hub lost power or was reset
[ 4944.681934] usb usb6: root hub lost power or was reset
[ 4944.681966] usb usb7: root hub lost power or was reset
[ 4944.681996] usb usb8: root hub lost power or was reset
[ 4944.682823] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 4944.688613] sd 0:0:0:0: [sda] Starting disk
[ 4944.728069] [drm:intel_opregion_init [i915]] *ERROR* No ACPI video bus found
[ 4945.010613] ata4: SATA link down (SStatus 0 SControl 300)
[ 4945.021192] usb 5-1: reset full-speed USB device number 2 using uhci_hcd
[ 4945.021243] ata3: SATA link down (SStatus 0 SControl 300)
[ 4945.168043] usb 4-1: reset low-speed USB device number 2 using uhci_hcd
[ 4945.420134] usb 5-2: reset low-speed USB device number 3 using uhci_hcd
[ 4945.488090] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4945.488101] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 4945.488110] ata2.01: link offline, clearing class 3 to NONE
[ 4945.496148] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 4945.496151] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 4945.496153] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 4945.512148] ata2.00: configured for UDMA/100
[ 4945.740130] PM: resume of devices complete after 1075.648 msecs
[ 4945.740434] PM: Finishing wakeup.
[ 4945.740435] Restarting tasks ...
[ 4945.740470] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4945.740480] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 4945.740484] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 4945.740490] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 4945.740494] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 4945.744521] done.
[ 4945.744710] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4945.744723] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 4945.744728] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 4945.744733] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 4945.744738] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 4945.744778] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4945.744783] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 4945.744786] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 4945.744791] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 4945.744796] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 4945.744834] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4945.744838] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 4945.744841] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 4945.744846] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 4945.744850] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 4945.744884] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4945.744888] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 4945.744891] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 4945.744896] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 4945.744900] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 4945.744934] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4945.744939] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 4945.744942] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 4945.744946] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 4945.744950] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 4946.320784] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 4946.320791] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 4950.512039] ata1.00: link is slow to respond, please be patient (ready=0)
[ 4954.168108] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4954.168191] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 4954.176382] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 4954.176387] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 4954.176390] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 4954.193066] ata1.00: configured for UDMA/133
[ 4958.725945] e1000e: eth0 NIC Link is Down
[ 4959.043951] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4959.236180] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4960.672779] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 4960.672787] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 4960.672821] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes readyJespére que cela te donnera des éléments nouveaux.
Hors ligne
#7 Le 12/09/2016, à 14:43
- Bougron
Re : démarrage trés lent d'ubuntu 16.04 LTS
Ce qu'on peut faire, c'est regarder l'état du disque.
Tu installes l'application GSMARTCONTROL qui est dans la logithèque et tu donnes le résultat de la commande
sudo smartctl -s on -a /dev/sdaJe pense tout simplement que la version 16.04.1 a plus d'application à initialiser et que cela prend plus de temps
Hors ligne
#8 Le 12/09/2016, à 15:14
- MC44
Re : démarrage trés lent d'ubuntu 16.04 LTS
le resultat donne ceci :
michel@michel-Inspiron-530:~$ sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de michel :
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue (SATA)
Device Model: WDC WD5000AAKS-75YGA0
Serial Number: WD-WCAS82681691
LU WWN Device Id: 5 0014ee 200bdadcc
Firmware Version: 12.01C02
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Mon Sep 12 15:11:34 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 112) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (13200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 154) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 198 197 051 Pre-fail Always - 17200
3 Spin_Up_Time 0x0003 177 175 021 Pre-fail Always - 6133
4 Start_Stop_Count 0x0032 093 093 000 Old_age Always - 7296
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 100 253 051 Old_age Always - 0
9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 17370
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 093 093 000 Old_age Always - 7294
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 340
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 7300
194 Temperature_Celsius 0x0022 111 106 000 Old_age Always - 39
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 198 198 000 Old_age Always - 167
198 Offline_Uncorrectable 0x0010 198 198 000 Old_age Offline - 176
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 194 194 051 Old_age Offline - 426
SMART Error Log Version: 1
ATA Error Count: 6613 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 6613 occurred at disk power-on lifetime: 17365 hours (723 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 40 00 ae fd e0 Error: UNC 64 sectors at LBA = 0x00fdae00 = 16625152
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 00 ae fd 39 00 00:01:05.801 READ DMA EXT
25 00 40 c0 ad fd 39 00 00:01:05.800 READ DMA EXT
25 00 40 80 ad fd 39 00 00:01:05.799 READ DMA EXT
25 00 40 40 ad fd 39 00 00:01:05.799 READ DMA EXT
25 00 40 00 ad fd 39 00 00:01:05.798 READ DMA EXT
Error 6612 occurred at disk power-on lifetime: 17365 hours (723 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 98 92 06 e0 Error: UNC 8 sectors at LBA = 0x00069298 = 430744
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 98 92 06 3a 08 01:40:50.881 READ DMA EXT
25 00 08 80 71 06 3a 08 01:40:50.881 READ DMA EXT
25 00 08 b8 46 06 3a 08 01:40:50.874 READ DMA EXT
25 00 08 28 dc 04 3a 08 01:40:50.874 READ DMA EXT
25 00 08 f0 1b 01 3a 08 01:40:50.874 READ DMA EXT
Error 6611 occurred at disk power-on lifetime: 17363 hours (723 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 18 f2 05 e0 Error: UNC 8 sectors at LBA = 0x0005f218 = 389656
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 18 f2 05 3a 00 01:25:17.107 READ DMA EXT
25 00 20 a0 df fc 39 00 01:25:17.107 READ DMA EXT
25 00 08 08 32 fc 39 00 01:25:17.107 READ DMA EXT
25 00 08 f8 2b fc 39 00 01:25:17.107 READ DMA EXT
25 00 08 a0 29 fc 39 00 01:25:17.106 READ DMA EXT
Error 6610 occurred at disk power-on lifetime: 17363 hours (723 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 40 80 81 fe e0 Error: UNC 64 sectors at LBA = 0x00fe8180 = 16679296
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 80 81 fe 39 00 01:25:09.514 READ DMA EXT
25 00 40 40 81 fe 39 00 01:25:09.513 READ DMA EXT
25 00 40 00 81 fe 39 00 01:25:09.503 READ DMA EXT
25 00 40 c0 80 fe 39 00 01:25:09.493 READ DMA EXT
25 00 40 80 80 fe 39 00 01:25:09.493 READ DMA EXT
Error 6609 occurred at disk power-on lifetime: 17353 hours (723 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 40 80 6e fd e0 Error: AMNF 64 sectors at LBA = 0x00fd6e80 = 16608896
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 80 6e fd 39 00 00:02:33.890 READ DMA EXT
25 00 40 40 6e fd 39 00 00:02:33.890 READ DMA EXT
25 00 40 00 6e fd 39 00 00:02:33.889 READ DMA EXT
25 00 40 c0 6d fd 39 00 00:02:33.888 READ DMA EXT
25 00 40 80 6d fd 39 00 00:02:33.887 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 13422 968663958
# 2 Short offline Completed: read failure 10% 10975 969128611
# 3 Short offline Completed: read failure 80% 10790 969128611
# 4 Short offline Completed: read failure 90% 10629 969128611
# 5 Short offline Completed: read failure 10% 10453 969132557
# 6 Short offline Completed: read failure 90% 10292 969140374
# 7 Short offline Completed: read failure 10% 10205 969143675
# 8 Short offline Completed without error 00% 9986 -
# 9 Short offline Completed without error 00% 9364 -
#10 Short offline Completed without error 00% 9096 -
#11 Extended offline Completed: read failure 90% 4475 898954098
#12 Short offline Completed: read failure 90% 4475 898954098
#13 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Hors ligne
#9 Le 12/09/2016, à 15:16
- MC44
Re : démarrage trés lent d'ubuntu 16.04 LTS
On dirait qu'il y a des erreurs mais je suis incapable de les comprendre encore moins de les réparer.
A suivre !
Hors ligne
#10 Le 13/09/2016, à 10:05
- Bougron
Re : démarrage trés lent d'ubuntu 16.04 LTS
Bonjour.
Il y a des anomalies sur le disque. J'ai noté
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
#11 Extended offline Completed: read failure 90% 4475 898954098
#12 Short offline Completed: read failure 90% 4475 898954098
# 1 Short offline Completed: read failure 90% 13422 968663958
# 2 Short offline Completed: read failure 10% 10975 969128611
# 3 Short offline Completed: read failure 80% 10790 969128611
# 4 Short offline Completed: read failure 90% 10629 969128611
# 5 Short offline Completed: read failure 10% 10453 969132557
# 6 Short offline Completed: read failure 90% 10292 969140374
# 7 Short offline Completed: read failure 10% 10205 969143675et surtout
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 198 198 000 Old_age Always - 167Soit l'existence de 167 secteurs devenus illisibles dont aucun n'est corrigé.
Il me semble que pour résoudre ce problème, il faut reformater les partitions qui contiennent les secteurs en question.
ou faire des commandes badblocks (je ne suis pas spécialiste).
J'ai aussi vu les 5 dernières erreurs.
Error 6613 occurred at disk power-on lifetime: 17365 hours (723 days + 13 hours)
Error 6612 occurred at disk power-on lifetime: 17365 hours (723 days + 13 hours)
Error 6611 occurred at disk power-on lifetime: 17363 hours (723 days + 11 hours)
Error 6610 occurred at disk power-on lifetime: 17363 hours (723 days + 11 hours)
Error 6609 occurred at disk power-on lifetime: 17353 hours (723 days + 1 hours)sachant que ton disque à 17370 heures de fonctionnement.
9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 17370Je pense que c'est le moment de te mettre en chasse d'un disque de remplacement.
Sachant qu'il peut encore fonctionner pas mal de temps.
Je te conseille de refaire cette commande tous les 15 jours ou tous les mois et de voir l'évolution. Si tu vois une aggravation rapide, il faudra accélérer le processus de remplacement. Penses à vérifier que tes données personnelles sont bien sauvegardées ailleurs.
La commande suivante devrait en dire plus
badblocks -s -v /dev/sdaDernière modification par Bougron (Le 13/09/2016, à 10:14)
Hors ligne
#11 Le 13/09/2016, à 19:52
- MC44
Re : démarrage trés lent d'ubuntu 16.04 LTS
merci pour ton analyse.
Effectivement le matériel n'est pas tout neuf.
Je fais des sauvegardes mais je vais être encore plus vigilant et penser à renouveler le matériel !!!!
Je pense que ce sont les vérifications qui retardent le démarrage.
Merci pour ton diagnostic.
Faut-il faire quelque chose de particulier pour clore ce fil ?
Pour moi c'est résolu.
Hors ligne
Pages : 1