#1 Le 15/10/2016, à 06:42
- ludo77
probleme gsmartcontrol (erreur 197,198)
Bonjour,
avec gsmartcontrol j'ai des erreurs qui sont apparu.
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-42-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue Mobile
Device Model: WDC WD10JPVX-80JC3T0
Serial Number: WD-WXW1E54TSEM3
LU WWN Device Id: 5 0014ee 65a1bdffb
Firmware Version: 01.01A01
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Oct 15 06:33:58 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (18720) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 209) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 36
3 Spin_Up_Time 0x0027 182 179 021 Pre-fail Always - 1858
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1423
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7584
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1415
191 G-Sense_Error_Rate 0x0032 007 007 000 Old_age Always - 93
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 59
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 8812
194 Temperature_Celsius 0x0022 110 095 000 Old_age Always - 37
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 2
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 2
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 4
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 7584 1848470808
# 2 Conveyance offline Completed: read failure 90% 7578 1848470808
# 3 Short offline Completed without error 00% 7578 -
# 4 Extended offline Completed: read failure 90% 7576 1848470808
# 5 Conveyance offline Completed: read failure 90% 7576 1848470808
# 6 Short offline Completed: read failure 90% 7576 1848470808
# 7 Extended offline Completed without error 00% 7226 -
# 8 Conveyance offline Completed without error 00% 7223 -
# 9 Short offline Completed without error 00% 7223 -
#10 Conveyance offline Completed without error 00% 7037 -
#11 Short offline Completed without error 00% 7037 -
#12 Conveyance offline Completed without error 00% 6808 -
#13 Short offline Completed without error 00% 6808 -
#14 Conveyance offline Completed without error 00% 6680 -
#15 Short offline Completed without error 00% 6680 -
#16 Conveyance offline Completed without error 00% 6632 -
#17 Short offline Completed without error 00% 6632 -
#18 Short offline Completed without error 00% 6558 -
#19 Short offline Completed without error 00% 5696 -
#20 Conveyance offline Completed without error 00% 5442 -
#21 Short offline Completed without error 00% 5440 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.pouvez vous m'aider
Je ne sais pas comment resoudre mon probleme
Merci
Hors ligne
#2 Le 15/10/2016, à 09:29
- ludo77
Re : probleme gsmartcontrol (erreur 197,198)
j'ai vu qu'il fallait reallouer les secteurs defectueux.
Est ce bien ce qu'il faut faire?
https://www.aplu.fr/v2/post/2016/01/07/ … defectueux
Dernière modification par ludo77 (Le 15/10/2016, à 11:29)
Hors ligne