Contenu | Rechercher | Menus

Annonce

Ubuntu 16.04 LTS
Commandez vos DVD et clés USB Ubuntu-fr !

Appel à contributeurs. Réunion pour la refonte du wiki lundi 26 juin

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

#51 Le 30/12/2016, à 11:06

CN46400

Re : Pagaille dans le landernau

jordanne@jordanne-desktop:~$ sudo apt-get install --no-install-recommends smartmontools
[sudo] password for jordanne: 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Paquets suggérés :
  gsmartcontrol smart-notifier
Paquets recommandés :
  mailx mailutils
Les NOUVEAUX paquets suivants seront installés :
  smartmontools
0 mis à jour, 1 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 455 ko dans les archives.
Après cette opération, 1 315 ko d'espace disque supplémentaires seront utilisés.
Réception de : 1 http://fr.archive.ubuntu.com/ubuntu/ precise/main smartmontools i386 5.41+svn3365-1 [455 kB]
455 ko réceptionnés en 0s (602 ko/s)   
Sélection du paquet smartmontools précédemment désélectionné.
(Lecture de la base de données... 263704 fichiers et répertoires déjà installés.)
Dépaquetage de smartmontools (à partir de .../smartmontools_5.41+svn3365-1_i386.deb) ...
Traitement des actions différées (« triggers ») pour « man-db »...
Traitement des actions différées (« triggers ») pour « ureadahead »...
ureadahead will be reprofiled on next reboot
Paramétrage de smartmontools (5.41+svn3365-1) ...
jordanne@jordanne-desktop:~$ 
jordanne@jordanne-desktop:~$ sudo smartctl -s on -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-119-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Deskstar T7K250
Device Model:     HDT722525DLAT80
Serial Number:    VD241DT7CAWK5C
LU WWN Device Id: 5 000cca 20cc4f325
Firmware Version: V44OA96A
User Capacity:    250 059 350 016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 1
Local Time is:    Fri Dec 30 09:44:50 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 4797) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  80) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   096   096   016    Pre-fail  Always       -       131078
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   114   114   024    Pre-fail  Always       -       305 (Average 307)
  4 Start_Stop_Count        0x0012   099   099   000    Old_age   Always       -       7718
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       1
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   020    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       18216
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       7434
192 Power-Off_Retract_Count 0x0032   094   094   050    Old_age   Always       -       8171
193 Load_Cycle_Count        0x0012   094   094   050    Old_age   Always       -       8171
194 Temperature_Celsius     0x0002   148   148   000    Old_age   Always       -       37 (Min/Max 12/50)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       1
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

jordanne@jordanne-desktop:~$ 
jordanne@jordanne-desktop:~$ sudo smartctl -s on -a /dev/sdb
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-119-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Maxtor DiamondMax 21
Device Model:     MAXTOR STM3160215A
Serial Number:    9RA0LCKS
Firmware Version: 3.AAC
User Capacity:    160 041 885 696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Fri Dec 30 09:46:56 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  430) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  54) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   119   097   006    Pre-fail  Always       -       205705014
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   093   093   020    Old_age   Always       -       7854
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   087   060   030    Pre-fail  Always       -       486858865
  9 Power_On_Hours          0x0032   055   055   000    Old_age   Always       -       39443
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   093   093   020    Old_age   Always       -       7497
187 Reported_Uncorrect      0x0032   088   088   000    Old_age   Always       -       12
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   074   046   045    Old_age   Always       -       26 (Min/Max 26/26)
194 Temperature_Celsius     0x0022   026   054   000    Old_age   Always       -       26 (0 14 0 0)
195 Hardware_ECC_Recovered  0x001a   085   064   000    Old_age   Always       -       86803354
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       2
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 42 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 42 occurred at disk power-on lifetime: 29926 hours (1246 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 b9 51 ae ed  Error: UNC at LBA = 0x0dae51b9 = 229527993

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 58 b8 51 ae ed 00      00:00:54.621  READ DMA
  27 00 00 00 00 00 e0 00      00:00:54.550  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02      00:00:54.538  IDENTIFY DEVICE
  ef 03 42 00 00 00 a0 02      00:00:54.521  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:00:54.462  READ NATIVE MAX ADDRESS EXT

Error 41 occurred at disk power-on lifetime: 29926 hours (1246 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 b9 51 ae ed  Error: UNC at LBA = 0x0dae51b9 = 229527993

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 58 b8 51 ae ed 00      00:00:48.489  READ DMA
  27 00 00 00 00 00 e0 00      00:00:48.429  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02      00:00:48.422  IDENTIFY DEVICE
  ef 03 42 00 00 00 a0 02      00:00:45.552  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:00:45.483  READ NATIVE MAX ADDRESS EXT

Error 40 occurred at disk power-on lifetime: 29926 hours (1246 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 b9 51 ae ed  Error: UNC at LBA = 0x0dae51b9 = 229527993

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 58 b8 51 ae ed 00      00:00:48.489  READ DMA
  27 00 00 00 00 00 e0 00      00:00:48.429  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02      00:00:48.422  IDENTIFY DEVICE
  ef 03 42 00 00 00 a0 02      00:00:45.552  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:00:45.483  READ NATIVE MAX ADDRESS EXT

Error 39 occurred at disk power-on lifetime: 29926 hours (1246 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 b9 51 ae ed  Error: UNC at LBA = 0x0dae51b9 = 229527993

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 58 b8 51 ae ed 00      00:00:39.491  READ DMA
  27 00 00 00 00 00 e0 00      00:00:39.488  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02      00:00:39.485  IDENTIFY DEVICE
  ef 03 42 00 00 00 a0 02      00:00:45.552  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:00:45.483  READ NATIVE MAX ADDRESS EXT

Error 38 occurred at disk power-on lifetime: 29926 hours (1246 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 b9 51 ae ed  Error: UNC at LBA = 0x0dae51b9 = 229527993

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 58 b8 51 ae ed 00      00:00:39.491  READ DMA
  27 00 00 00 00 00 e0 00      00:00:39.488  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02      00:00:39.485  IDENTIFY DEVICE
  ef 03 42 00 00 00 a0 02      00:00:39.481  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:00:39.477  READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

jordanne@jordanne-desktop:~$ 
jordanne@jordanne-desktop:~$ sudo smartctl -s on -a /dev/sdc
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-119-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Maxtor DiamondMax 21
Device Model:     MAXTOR STM3160215A
Serial Number:    9RA9ZBVS
Firmware Version: 3.AAD
User Capacity:    160 041 885 696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Fri Dec 30 09:50:26 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  430) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  54) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   119   097   006    Pre-fail  Always       -       203937669
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   094   094   020    Old_age   Always       -       6287
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   083   060   030    Pre-fail  Always       -       213908258
  9 Power_On_Hours          0x0032   089   089   000    Old_age   Always       -       10213
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   095   095   020    Old_age   Always       -       5935
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   073   047   045    Old_age   Always       -       27 (Min/Max 27/27)
194 Temperature_Celsius     0x0022   027   053   000    Old_age   Always       -       27 (0 14 0 0)
195 Hardware_ECC_Recovered  0x001a   087   068   000    Old_age   Always       -       127081431
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

jordanne@jordanne-desktop:~$ 

Hors ligne

#52 Le 30/12/2016, à 11:18

CN46400

Re : Pagaille dans le landernau

Réponse 5 à #50

jordanne@jordanne-desktop:~$ df -Th | grep -Ev "devpts|none|proc|sys|tmpfs|udev"; echo; df -Ti | grep -Ev "devpts|none|proc|sys|tmpfs|udev"
Sys. de fichiers Type     Taille Utilisé Dispo Uti% Monté sur
/dev/sda5        ext4       113G     40G   68G  37% /
/dev/sdb1        ext2        73G     52M   69G   1% /media/xubuntu
/dev/sdc1        fuseblk     66G    4,2G   62G   7% /media/System
/dev/sdc5        ext4        47G    5,3G   39G  13% /media/c04045bf-9b9f-465e-9fb9-3f0b59d1006a
/dev/sdb5        ext4        74G     36G   35G  51% /media/e7d1c76c-9514-4b58-8d36-3741887af58a
/dev/sdc7        ext4        35G    5,3G   28G  17% /media/71498932-389d-406f-aade-6b6d6b58c85e
/dev/sda1        fuseblk    117G    8,7G  109G   8% /media/System_
Réponse 5 à #50

Sys. de fichiers Type        Inœuds  IUtil.    ILibre IUti% Monté sur
/dev/sda5        ext4       7512064  391497   7120567    6% /
/dev/sdb1        ext2       4808704      15   4808689    1% /media/xubuntu
/dev/sdc1        fuseblk   64816416   22265  64794151    1% /media/System
/dev/sdc5        ext4       3088384  286745   2801639   10% /media/c04045bf-9b9f-465e-9fb9-3f0b59d1006a
/dev/sdb5        ext4       4874240 1219356   3654884   26% /media/e7d1c76c-9514-4b58-8d36-3741887af58a
/dev/sdc7        ext4       2281104  259165   2021939   12% /media/71498932-389d-406f-aade-6b6d6b58c85e
/dev/sda1        fuseblk  113531632   56897 113474735    1% /media/System_
jordanne@jordanne-desktop:~$

Dernière modification par CN46400 (Le 30/12/2016, à 11:21)

Hors ligne