#1 Le 26/12/2016, à 22:49
- palefragger
Problème de démarrage Ubuntu 16.10 sur MSI GL62-6QD-470XFR
Bonsoir,
J'ai eu pour Noël un portable MSI GL62-6QD-470XFR (i5 6300HQ, Nvidia GTX950M, 8Go RAM) sans OS. Après plusieurs freezes lors de l'installation d'Ubuntu 16.10, je suis rapidement venu à suivre le tuto d'obibann qui avait réussi l'installation sur un MSI GP62-6QE-408XFR (même processeur et carte graphique).
Hier, j'ai donc décidé d'installer Ubuntu 16.10 (que j'avais également sur mon ancien PC) mais à l'issue de l'installation des soucis persistent et m'empêchent de profiter de ce nouveau PC.
J'ai donc procédé aux modifs dans le BIOS (touche "Suppr") et installé Ubuntu via UNetbootin.
A la 1ère ouverture de session, j'ai découvert que le TouchPad était inactif !!! N'ayant pas de souris et n'étant pas habitué aux touches de raccourcis, c'est un peu galère mais pas insurmontable.
A la troisième ouverture/étape 5 (soit après l'installation des pilotes graphiques), et bien, ça freeze sur le fond mauve de lancement (avant même l'apparition du mot "ubuntu") : Ubuntu se fige et impossible d'accéder à quoique ce soit d'où extinction forcée avec le bouton d'allumage. Je ne comprends pas ce que j'ai raté car j'ai suivi scrupuleusement le tuto à la lettre.
Pour arriver à ouvrir une session, je suis donc obligé de passer par l'étape 3 (ajout de "nouveau.blacklist=1 acpi=off" dans les options de démarrage de Grub).
Vu le nombre de personnes ayant effectué cette installation, je pense ne pas être le seul dans ce cas cependant je n'ai rien trouvé de concluant sur les fils de discussion (ou je suis passé à côté). J'ai beau chercher avec "google" mais je reste bloqué.
Une âme charitable pourrait-elle m'indiquer ce qu'il me manque pour activer le TouchPad et pour lancer Ubuntu normalement, bref avoir une installation propre ???
D'avance, merci beaucoup ^^
PS: Touchpad
la commande : "xinput list" ne fait pas apparaître le Touchpad
la commande : "egrep -i 'synap|alps|etps' /proc/bus/input/devices" ne me donne rien.
Dernière modification par palefragger (Le 27/12/2016, à 15:01)
Hors ligne
#2 Le 27/12/2016, à 08:40
- malbo
Re : Problème de démarrage Ubuntu 16.10 sur MSI GL62-6QD-470XFR
Pour arriver à ouvrir une session, je suis donc obligé de passer par l'étape 3 (ajout de "nouveau.blacklist=1 acpi=off" dans les options de démarrage de Grub).
Au lieu d'ajouter "nouveau.blacklist=1 acpi=off", je te suggère d'ajouter nomodeset et de vérifier si tu obtiens un fonctionnement du Touchpad. Motif : je n'en suis pas certain mais je pense que c'est le paramètre acpi=off qui empêche le fonctionnement du Touchpad.
Hors ligne
#3 Le 27/12/2016, à 14:39
- palefragger
Re : Problème de démarrage Ubuntu 16.10 sur MSI GL62-6QD-470XFR
Merci pour cette réponse rapide qui a effectivement résolu le problème du Touchpad !!! Super
Cependant, à chaque lancement, je suis obligé d'ajouter l'option "nomodeset" dans les options de démarrage sans quoi Ubuntu reste figé sur l'écran "mauve".
Aurais-tu une idée sur ce qui pose problème ???
Dernière modification par palefragger (Le 28/12/2016, à 00:40)
Hors ligne
#4 Le 02/01/2017, à 21:02
- palefragger
Re : Problème de démarrage Ubuntu 16.10 sur MSI GL62-6QD-470XFR
Bonsoir et bonne année tout le monde,
Quelqu'un aurait-il une explication ou la réponse à mon problème d'ouverture d'Ubuntu ???
Hors ligne
#5 Le 04/01/2017, à 10:29
- malbo
Re : Problème de démarrage Ubuntu 16.10 sur MSI GL62-6QD-470XFR
Bonjour et bonne année palefragger,
Pour faire un état des lieux avant d'aller plus loin, je te prie de faire un Boot-Info depuis une session de ton Ubuntu installé (en ajoutant "nomodeset" puisque c'est nécessaire) et de donner l'URL de ce Boot-Info dans ta réponse.
Hors ligne
#6 Le 04/01/2017, à 10:53
- palefragger
Re : Problème de démarrage Ubuntu 16.10 sur MSI GL62-6QD-470XFR
Encore une fois merci de m'apporter ton aide ^^
J'espère que ce Boot-info t'aiguillera sur mon problème (car moi, je suis un peu dépassé).
Hors ligne
#7 Le 04/01/2017, à 13:07
- malbo
Re : Problème de démarrage Ubuntu 16.10 sur MSI GL62-6QD-470XFR
Ton Boot-Info est là :
Boot Info Script cfd9efe + Boot-Repair extra info [Boot-Info 26Apr2016]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.10
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 82,034,687 82,032,640 83 Linux
/dev/sda2 82,036,734 1,953,523,711 1,871,486,978 5 Extended
/dev/sda5 82,036,736 1,937,506,303 1,855,469,568 83 Linux
/dev/sda6 1,937,508,352 1,953,523,711 16,015,360 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 70349c35-1582-46a3-835a-9f603dea9df5 ext4
/dev/sda5 e9474948-8c02-4f76-90ee-5042ce6b83dc ext4
/dev/sda6 a9588758-3f9f-42da-8ae6-d66a1ec4f20a swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 4 09:39 ata-HL-DT-ST_DVDRAM_GUD0N_KZSG85E0423 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 4 09:49 ata-WDC_WD10JPVX-22JC3T0_WD-WXR1EB51XZDL -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 4 09:49 ata-WDC_WD10JPVX-22JC3T0_WD-WXR1EB51XZDL-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 4 09:49 ata-WDC_WD10JPVX-22JC3T0_WD-WXR1EB51XZDL-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 4 09:49 ata-WDC_WD10JPVX-22JC3T0_WD-WXR1EB51XZDL-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Jan 4 09:49 ata-WDC_WD10JPVX-22JC3T0_WD-WXR1EB51XZDL-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 Jan 4 09:39 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 4 09:49 wwn-0x50014ee6b18d1547 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 4 09:49 wwn-0x50014ee6b18d1547-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 4 09:49 wwn-0x50014ee6b18d1547-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 4 09:49 wwn-0x50014ee6b18d1547-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Jan 4 09:49 wwn-0x50014ee6b18d1547-part6 -> ../../sda6
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda5 /home ext4 (rw,relatime,data=ordered)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 70349c35-1582-46a3-835a-9f603dea9df5
else
search --no-floppy --fs-uuid --set=root 70349c35-1582-46a3-835a-9f603dea9df5
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-70349c35-1582-46a3-835a-9f603dea9df5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 70349c35-1582-46a3-835a-9f603dea9df5
else
search --no-floppy --fs-uuid --set=root 70349c35-1582-46a3-835a-9f603dea9df5
fi
linux /boot/vmlinuz-4.8.0-32-generic root=UUID=70349c35-1582-46a3-835a-9f603dea9df5 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-32-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-70349c35-1582-46a3-835a-9f603dea9df5' {
menuentry 'Ubuntu, avec Linux 4.8.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-32-generic-advanced-70349c35-1582-46a3-835a-9f603dea9df5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 70349c35-1582-46a3-835a-9f603dea9df5
else
search --no-floppy --fs-uuid --set=root 70349c35-1582-46a3-835a-9f603dea9df5
fi
echo 'Chargement de Linux 4.8.0-32-generic…'
linux /boot/vmlinuz-4.8.0-32-generic root=UUID=70349c35-1582-46a3-835a-9f603dea9df5 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-32-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-32-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-32-generic-init-upstart-70349c35-1582-46a3-835a-9f603dea9df5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 70349c35-1582-46a3-835a-9f603dea9df5
else
search --no-floppy --fs-uuid --set=root 70349c35-1582-46a3-835a-9f603dea9df5
fi
echo 'Chargement de Linux 4.8.0-32-generic…'
linux /boot/vmlinuz-4.8.0-32-generic root=UUID=70349c35-1582-46a3-835a-9f603dea9df5 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-32-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-32-generic-recovery-70349c35-1582-46a3-835a-9f603dea9df5' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 70349c35-1582-46a3-835a-9f603dea9df5
else
search --no-floppy --fs-uuid --set=root 70349c35-1582-46a3-835a-9f603dea9df5
fi
echo 'Chargement de Linux 4.8.0-32-generic…'
linux /boot/vmlinuz-4.8.0-32-generic root=UUID=70349c35-1582-46a3-835a-9f603dea9df5 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-32-generic
}
menuentry 'Ubuntu, avec Linux 4.8.0-22-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-22-generic-advanced-70349c35-1582-46a3-835a-9f603dea9df5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 70349c35-1582-46a3-835a-9f603dea9df5
else
search --no-floppy --fs-uuid --set=root 70349c35-1582-46a3-835a-9f603dea9df5
fi
echo 'Chargement de Linux 4.8.0-22-generic…'
linux /boot/vmlinuz-4.8.0-22-generic root=UUID=70349c35-1582-46a3-835a-9f603dea9df5 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-22-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-22-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-22-generic-init-upstart-70349c35-1582-46a3-835a-9f603dea9df5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 70349c35-1582-46a3-835a-9f603dea9df5
else
search --no-floppy --fs-uuid --set=root 70349c35-1582-46a3-835a-9f603dea9df5
fi
echo 'Chargement de Linux 4.8.0-22-generic…'
linux /boot/vmlinuz-4.8.0-22-generic root=UUID=70349c35-1582-46a3-835a-9f603dea9df5 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-22-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-22-generic-recovery-70349c35-1582-46a3-835a-9f603dea9df5' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 70349c35-1582-46a3-835a-9f603dea9df5
else
search --no-floppy --fs-uuid --set=root 70349c35-1582-46a3-835a-9f603dea9df5
fi
echo 'Chargement de Linux 4.8.0-22-generic…'
linux /boot/vmlinuz-4.8.0-22-generic root=UUID=70349c35-1582-46a3-835a-9f603dea9df5 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-22-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 70349c35-1582-46a3-835a-9f603dea9df5
else
search --no-floppy --fs-uuid --set=root 70349c35-1582-46a3-835a-9f603dea9df5
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 70349c35-1582-46a3-835a-9f603dea9df5
else
search --no-floppy --fs-uuid --set=root 70349c35-1582-46a3-835a-9f603dea9df5
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=70349c35-1582-46a3-835a-9f603dea9df5 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda5 during installation
UUID=e9474948-8c02-4f76-90ee-5042ce6b83dc /home ext4 defaults 0 2
# swap was on /dev/sda6 during installation
UUID=a9588758-3f9f-42da-8ae6-d66a1ec4f20a none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
34.135047913 = 36.652228608 boot/grub/grub.cfg 1
32.131752014 = 34.501206016 boot/grub/i386-pc/core.img 1
1.293094635 = 1.388449792 boot/vmlinuz-4.8.0-22-generic 1
34.570617676 = 37.119918080 boot/vmlinuz-4.8.0-32-generic 1
34.570617676 = 37.119918080 vmlinuz 1
1.293094635 = 1.388449792 vmlinuz.old 1
35.008121490 = 37.589684224 boot/initrd.img-4.8.0-22-generic 2
35.046497345 = 37.630889984 boot/initrd.img-4.8.0-32-generic 2
35.046497345 = 37.630889984 initrd.img 2
35.008121490 = 37.589684224 initrd.img.old 2
ADDITIONAL INFORMATION :
=================== log of boot-info 2017-01-04__09h48 ===================
boot-info version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa40
boot-info is executed in installed-session (Ubuntu 16.10, yakkety, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.8.0-32-generic root=UUID=70349c35-1582-46a3-835a-9f603dea9df5 ro nomodeset quiet splash
Partition 2 does not start on physical sector boundary.
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 16.10 CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="70349c35-1582-46a3-835a-9f603dea9df5" TYPE="ext4" PARTUUID="788d8f45-01"
/dev/sda5: UUID="e9474948-8c02-4f76-90ee-5042ce6b83dc" TYPE="ext4" PARTUUID="788d8f45-05"
/dev/sda6: UUID="a9588758-3f9f-42da-8ae6-d66a1ec4f20a" TYPE="swap" PARTUUID="788d8f45-06"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Partition 2 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 oct. 12 22:48 grub.d
total 76
-rwxr-xr-x 1 root root 9791 sept. 6 16:10 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 sept. 6 16:10 10_linux
-rwxr-xr-x 1 root root 11082 sept. 6 16:10 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 sept. 6 16:10 30_os-prober
-rwxr-xr-x 1 root root 1418 sept. 6 16:10 30_uefi-firmware
-rwxr-xr-x 1 root root 214 sept. 6 16:10 40_custom
-rwxr-xr-x 1 root root 216 sept. 6 16:10 41_custom
-rw-r--r-- 1 root root 483 sept. 6 16:10 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
EFI in dmesg.
[ 0.000000] ACPI: UEFI 0x00000000775FD3D0 000042 (v01 00000000 00000000)
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, signed grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, .
sda5 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /home.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD10JPVX-22J (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 42.0GB 42.0GB primary ext4 boot
2 42.0GB 1000GB 958GB extended
5 42.0GB 992GB 950GB logical ext4
6 992GB 1000GB 8200MB logical linux-swap(v1)
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:msdos:ATA WDC WD10JPVX-22J:;
1:1049kB:42.0GB:42.0GB:ext4::boot;
2:42.0GB:1000GB:958GB:::;
5:42.0GB:992GB:950GB:ext4::;
6:992GB:1000GB:8200MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sr0 rom 1024M
sda disk 931,5G
sda2 part 1K
sda5 part ext4 884,8G
sda1 part ext4 39,1G
sda6 part swap 7,7G
KNAME ROTA RO RM STATE MOUNTPOINT
sr0 1 0 1 running
sda 1 0 0 running
sda2 1 0 0
sda5 1 0 0 /home
sda1 1 0 0 /
sda6 1 0 0 [SWAP]
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4019040k,nr_inodes=1004760,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=808168k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (rw,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids,release_agent=/run/cgmanager/agents/cgm-release-agent.pids)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,clone_children)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb,release_agent=/run/cgmanager/agents/cgm-release-agent.hugetlb)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=10935)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sda5 on /home type ext4 (rw,relatime,data=ordered)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=808164k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
=================== ls:
/sys/block/sda (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dvd dvdrw ecryptfs fd full fuse hpet hugepages hwrng initctl input kmsg kvm lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sda6 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type
Partition 2 does not start on physical sector boundary.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 790M 9.8M 780M 2% /run
/dev/sda1 ext4 39G 4.9G 32G 14% /
tmpfs tmpfs 3.9G 140K 3.9G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/sda5 ext4 870G 125M 826G 1% /home
tmpfs tmpfs 790M 112K 790M 1% /run/user/1000
=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x788d8f45
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 82034687 82032640 39.1G 83 Linux
/dev/sda2 82036734 1953523711 1871486978 892.4G 5 Extended
/dev/sda5 82036736 1937506303 1855469568 884.8G 83 Linux
/dev/sda6 1937508352 1953523711 16015360 7.7G 82 Linux swap / Solaris
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== User settings
The settings chosen by the user will not act on the boot.
paste.ubuntu.com ko (), using paste.debian
paste.debian.net ko (), using paste2
Tout me parait correct là-dedans. Ton souci est uniquement un problème graphique à mon avis. Je te suggère de créer une nouvelle discussion dans la rubrique spécialisée Affichage et cartes graphiques. Dans cette nouvelle discussion, je te prie de donner le lien vers la présente discussion afin que les contributeurs puissent avoir des infos utiles. J'aurais bien voulu t'aider pour ce pb graphique mais je suis trop mauvais dans ce domaine.
Dernière modification par malbo (Le 04/01/2017, à 13:10)
Hors ligne
#8 Le 04/01/2017, à 13:42
- palefragger
Re : Problème de démarrage Ubuntu 16.10 sur MSI GL62-6QD-470XFR
Je vais suivre ton conseil malbo et ouvrir une nouvelle discussion. Merci en tout cas d'avoir pris le temps de me lire et d'avoir essayé de m'aider
Nouvelle discussion ici : affichage et cartes graphiques
Dernière modification par palefragger (Le 08/01/2017, à 21:57)
Hors ligne