Configuration carte graphique (résolu)

kloklo28 · Le 29/12/2016, à 17:19

Bonjour,
On va dire débutant, mais je m'accroche pour comprendre pourquoi j'ai un démarrage lent et des messages au boot.

kloklo28@kloklo28-Aspire-7750G:~$ lshw -enable pci -class display
ATTENTION: ce programme devrait être lancé en tant que super-utilisateur.
  *-display               
       description: VGA compatible controller
       produit: Whistler [Radeon HD 6630M/6650M/6750M/7670M/7690M]
       fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
       identifiant matériel: 0
       information bus: pci@0000:01:00.0
       version: 00
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: vga_controller bus_master cap_list rom
       configuration: driver=radeon latency=0
       ressources: irq:34 mémoire:b0000000-bfffffff mémoire:c0300000-c031ffff portE/S:3000(taille=256) mémoire:c0340000-c035ffff
ATTENTION: les informations sont potentiellement incomplètes ou erronées, vous devriez lancer ce programme en tant que super-utilisateur.
kloklo28@kloklo28-Aspire-7750G:~$ grep /drivers/ /var/log/Xorg.0.log
[    76.995] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    76.996] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    77.053] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    77.053] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    77.053] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

Dernière modification par kloklo28 (Le 06/01/2017, à 20:13)

hibou7 · Le 30/12/2016, à 02:04

Salut kloklo28

peux tu relancer la commande, en mode sudo cette fois, et envoyer le retour?

sudo lshw -enable pci -class display

Dernière modification par hibou7 (Le 30/12/2016, à 02:06)

kloklo28 · Le 30/12/2016, à 12:48

Hello hibou7

En premier merci pour ta participation,mais sache que j'en suis au balbutiement, alors allons-y.

kloklo28@kloklo28-Aspire-7750G:~$ sudo lshw ~enable pci -class display
[sudo] password for kloklo28: 
Hardware Lister (lshw) - B.02.16
usage: lshw [-format] [-options ...]
       lshw -version

	-version        affiche la version de lshw (B.02.16)

formats disposibles
	-html           affiche l'arborescence en HTML
	-xml            affiche l'arborescence en XML
	-short          affiche seulement les chemins matériels
	-businfo        affiche les informations de bus

options disponibles
	-class CLASS    affiche seulement une certaine classe de matériel
	-C CLASS        raccourci pour '-class CLASS'
	-c CLASS        raccourci pour '-class CLASS'
	-disable TEST   désactive un test (pci, isapnp, cpuid, etc. )
	-enable TEST    active un test (pci, isapnp, cpuid, etc. )
	-quiet          mode silencieux: pas d'affichage lors de l'analyse
	-sanitize       omet les informations sensibles (comme les numéros de série, etc.)
	-numeric        affiche les ID numériques (PCI, USB, etc.)

MrKebi · Le 30/12/2016, à 15:25

Hello, il y a une erreur dans la commande que tu as donné : ce n'est pas sudo lshw ~enable pci -class display mais bien comme te l'a donné hibou7 sudo lshw -enable pci -class display. Pour éviter les erreurs sur les retours de commandes, il est fortement de copier/coller directement les commandes données dans ton terminal

kloklo28 · Le 30/12/2016, à 18:59

Ok Blabladodo, je ne maîtrise pas encore toutes les astuces, j'ai fais un copier/coller cette fois çi.

kloklo28@kloklo28-Aspire-7750G:~$ sudo lshw -enable pci -class display
[sudo] password for kloklo28: 
  *-display               
       description: VGA compatible controller
       produit: Whistler [Radeon HD 6630M/6650M/6750M/7670M/7690M]
       fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
       identifiant matériel: 0
       information bus: pci@0000:01:00.0
       version: 00
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm pciexpress msi vga_controller bus_master cap_list rom
       configuration: driver=radeon latency=0
       ressources: irq:34 mémoire:b0000000-bfffffff mémoire:c0300000-c031ffff portE/S:3000(taille=256) mémoire:c0340000-c035ffff
kloklo28@kloklo28-Aspire-7750G:~$

hibou7 · Le 30/12/2016, à 22:16

,,,je m'accroche pour comprendre pourquoi j'ai un démarrage lent et des messages au boot.

.

Quelques messages au boot, ça peut être tout à fait normal. J'en ai aussi.

Pour le démarrage lent, peux tu nous dire combien de minutes?
Pour suivre le démarrage de ta machine, la commande c'est

dmesg

Tu peux la lancer sans autre et publier le retour ici.

Dernière modification par hibou7 (Le 30/12/2016, à 22:17)

kloklo28 · Le 30/12/2016, à 22:44

Je ne sais si la manip est bonne, mais je tente. Il y a beaucoup de ligne.

f8800ab63f000-ffff8800af63efff]
[    0.829394] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.829395] hw unit of domain pp0-core 2^-16 Joules
[    0.829397] hw unit of domain package 2^-16 Joules
[    0.829398] hw unit of domain pp1-gpu 2^-16 Joules
[    0.829493] Scanning for low memory corruption every 60 seconds
[    0.829914] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.829953] audit: initializing netlink subsys (disabled)
[    0.829970] audit: type=2000 audit(1483121541.788:1): initialized
[    0.830366] Initialise system trusted keyring
[    0.830483] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.832095] zbud: loaded
[    0.832318] VFS: Disk quotas dquot_6.6.0
[    0.832361] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.832646] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.832891] fuse init (API version 7.23)
[    0.833034] Key type big_key registered
[    0.833066] Allocating IMA MOK and blacklist keyrings.
[    0.833482] Key type asymmetric registered
[    0.833485] Asymmetric key parser 'x509' registered
[    0.833523] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.833557] io scheduler noop registered
[    0.833560] io scheduler deadline registered (default)
[    0.833595] io scheduler cfq registered
[    0.834179] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.834187] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.834224] intel_idle: MWAIT substates: 0x21120
[    0.834225] intel_idle: v0.4.1 model 0x2A
[    0.834226] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.039962] ACPI: AC Adapter [ACAD] (on-line)
[    1.040046] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[    1.040051] ACPI: Power Button [PWRB]
[    1.040090] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input1
[    1.040119] ACPI: Lid Switch [LID0]
[    1.040157] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2
[    1.040160] ACPI: Sleep Button [SLPB]
[    1.040200] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.040202] ACPI: Power Button [PWRF]
[    1.040644] GHES: HEST is not enabled!
[    1.040887] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.399823] ACPI: Battery Slot [BAT0] (battery present)
[    1.400055] Linux agpgart interface v0.103
[    1.403333] brd: module loaded
[    1.404682] loop: module loaded
[    1.404914] libphy: Fixed MDIO Bus: probed
[    1.404917] tun: Universal TUN/TAP device driver, 1.6
[    1.404918] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.404959] PPP generic driver version 2.4.2
[    1.405016] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.405020] ehci-pci: EHCI PCI platform driver
[    1.405152] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.405158] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.405174] ehci-pci 0000:00:1a.0: debug port 2
[    1.409096] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.409110] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc130a000
[    1.419881] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.419993] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.419996] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.419998] usb usb1: Product: EHCI Host Controller
[    1.420000] usb usb1: Manufacturer: Linux 4.4.0-57-generic ehci_hcd
[    1.420001] usb usb1: SerialNumber: 0000:00:1a.0
[    1.420235] hub 1-0:1.0: USB hub found
[    1.420244] hub 1-0:1.0: 2 ports detected
[    1.420512] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.420521] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.420536] ehci-pci 0000:00:1d.0: debug port 2
[    1.424448] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.424461] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1309000
[    1.435889] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.435995] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.435998] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.436000] usb usb2: Product: EHCI Host Controller
[    1.436002] usb usb2: Manufacturer: Linux 4.4.0-57-generic ehci_hcd
[    1.436004] usb usb2: SerialNumber: 0000:00:1d.0
[    1.436248] hub 2-0:1.0: USB hub found
[    1.436257] hub 2-0:1.0: 2 ports detected
[    1.436385] ehci-platform: EHCI generic platform driver
[    1.436403] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.436409] ohci-pci: OHCI PCI platform driver
[    1.436422] ohci-platform: OHCI generic platform driver
[    1.436431] uhci_hcd: USB Universal Host Controller Interface driver
[    1.436543] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.436549] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[    1.436747] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[    1.436959] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.436961] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.436963] usb usb3: Product: xHCI Host Controller
[    1.436964] usb usb3: Manufacturer: Linux 4.4.0-57-generic xhci-hcd
[    1.436966] usb usb3: SerialNumber: 0000:05:00.0
[    1.437155] hub 3-0:1.0: USB hub found
[    1.437168] hub 3-0:1.0: 2 ports detected
[    1.437269] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.437274] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[    1.440154] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.440171] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.440173] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.440175] usb usb4: Product: xHCI Host Controller
[    1.440177] usb usb4: Manufacturer: Linux 4.4.0-57-generic xhci-hcd
[    1.440179] usb usb4: SerialNumber: 0000:05:00.0
[    1.440371] hub 4-0:1.0: USB hub found
[    1.440385] hub 4-0:1.0: 2 ports detected
[    1.440531] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    1.497123] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.497127] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.497431] mousedev: PS/2 mouse device common for all mice
[    1.500359] rtc_cmos 00:01: RTC can wake from S4
[    1.500572] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.500606] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.500615] i2c /dev entries driver
[    1.500672] device-mapper: uevent: version 1.0.3
[    1.500782] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.500802] Intel P-state driver initializing.
[    1.501195] ledtrig-cpu: registered to indicate activity on CPUs
[    1.502262] NET: Registered protocol family 10
[    1.502769] NET: Registered protocol family 17
[    1.502802] Key type dns_resolver registered
[    1.503339] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
[    1.503359] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
[    1.503391] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
[    1.503416] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
[    1.503525] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.504012] registered taskstats version 1
[    1.504049] Loading compiled-in X.509 certificates
[    1.506821] Loaded X.509 cert 'Build time autogenerated kernel key: b6199044dc0d1db0336e3627c6468585f3036ddc'
[    1.506879] zswap: loaded using pool lzo/zbud
[    1.509428] Key type trusted registered
[    1.512698] Key type encrypted registered
[    1.512707] AppArmor: AppArmor sha1 policy hashing enabled
[    1.512712] ima: No TPM chip found, activating TPM-bypass!
[    1.512734] evm: HMAC attrs: 0x1
[    1.513142]   Magic number: 12:370:242
[    1.513251] rtc_cmos 00:01: setting system clock to 2016-12-30 18:12:23 UTC (1483121543)
[    1.513320] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.513322] EDD information not available.
[    1.513399] PM: Hibernation image not present or could not be loaded.
[    1.514293] Freeing unused kernel memory: 1496K (ffffffff81f47000 - ffffffff820bd000)
[    1.514296] Write protecting the kernel read-only data: 14336k
[    1.514838] Freeing unused kernel memory: 2008K (ffff88000180a000 - ffff880001a00000)
[    1.515211] Freeing unused kernel memory: 120K (ffff880001de2000 - ffff880001e00000)
[    1.526303] systemd-udevd[135]: starting version 204
[    1.536597] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.563161] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.731914] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.747869] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[    1.747871] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.828112] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[    1.828117] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[    1.864394] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.864405] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.864872] hub 1-1:1.0: USB hub found
[    1.865006] hub 1-1:1.0: 6 ports detected
[    1.880233] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.880246] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.880710] hub 2-1:1.0: USB hub found
[    1.880875] hub 2-1:1.0: 6 ports detected
[    1.901359] usb 3-2: New USB device found, idVendor=4168, idProduct=1012
[    1.901370] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.901376] usb 3-2: Product: Targus Wireless Mouse
[    1.901381] usb 3-2: Manufacturer: reserved
[    1.960522] ahci 0000:00:1f.2: version 3.0
[    1.960678] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.975926] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.975933] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst 
[    1.984853] scsi host0: ahci
[    1.985003] scsi host1: ahci
[    1.985127] scsi host2: ahci
[    1.985233] scsi host3: ahci
[    1.985333] scsi host4: ahci
[    1.985432] scsi host5: ahci
[    1.985486] ata1: SATA max UDMA/133 abar m2048@0xc1308000 port 0xc1308100 irq 30
[    1.985487] ata2: DUMMY
[    1.985490] ata3: SATA max UDMA/133 abar m2048@0xc1308000 port 0xc1308200 irq 30
[    1.985492] ata4: DUMMY
[    1.985493] ata5: DUMMY
[    1.985494] ata6: DUMMY
[    1.990615] hidraw: raw HID events driver (C) Jiri Kosina
[    1.991946] atl1c 0000:02:00.0: version 1.0.1.1-NAPI
[    2.001676] usbcore: registered new interface driver usbhid
[    2.001679] usbhid: USB HID core driver
[    2.003507] input: reserved Targus Wireless Mouse as /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb3/3-2/3-2:1.0/0003:4168:1012.0001/input/input7
[    2.003684] hid-generic 0003:4168:1012.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [reserved Targus Wireless Mouse] on usb-0000:05:00.0-2/input0
[    2.135939] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    2.279622] usb 1-1.3: New USB device found, idVendor=064e, idProduct=d20c
[    2.279627] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.279629] usb 1-1.3: Product: 1.3M HD WebCam
[    2.279630] usb 1-1.3: Manufacturer: SuYin
[    2.279632] usb 1-1.3: SerialNumber: HF2015-A821-OV01-VA-R01.01.01
[    2.303946] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.306900] ata1.00: ATA-7: FUJITSU MHV2120BH, 00000029, max UDMA/100
[    2.306910] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.311917] ata1.00: configured for UDMA/100
[    2.312155] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2120B 0029 PQ: 0 ANSI: 5
[    2.312391] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    2.312447] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.312463] sd 0:0:0:0: [sda] Write Protect is off
[    2.312467] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.312488] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.351953] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    2.370549]  sda: sda1 sda2 < sda5 >
[    2.371078] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.457867] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0138
[    2.457872] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.457874] usb 1-1.4: Product: USB2.0-CRW
[    2.457876] usb 1-1.4: Manufacturer: Generic
[    2.457877] usb 1-1.4: SerialNumber: 20090516388200000
[    2.467451] usbcore: registered new interface driver usb-storage
[    2.469014] usbcore: registered new interface driver uas
[    2.470448] ums-realtek 1-1.4:1.0: USB Mass Storage device detected
[    2.489585] scsi host6: usb-storage 1-1.4:1.0
[    2.489678] usbcore: registered new interface driver ums-realtek
[    2.632003] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.633828] ata3.00: ATAPI: MATSHITADVD-RAM UJ8B0, 1.00, max UDMA/100
[    2.638820] ata3.00: configured for UDMA/100
[    2.650186] scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8B0    1.00 PQ: 0 ANSI: 5
[    2.671359] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.671363] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.671600] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.671710] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.690681] usb 1-1.4: USB disconnect, device number 4
[    2.827993] clocksource: Switched to clocksource tsc
[    3.216506] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.867479] psmouse serio1: synaptics: queried max coordinates: x [..5774], y [..5022]
[    3.940432] random: nonblocking pool is initialized
[    4.103340] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1694, fw id: 705179
[    4.253472] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[   16.873009] Adding 4173820k swap on /dev/sda5.  Priority:-1 extents:1 across:4173820k FS
[   17.381875] systemd-udevd[333]: starting version 204
[   17.696091] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[   17.697751] wmi: Mapper loaded
[   17.713581] lp: driver loaded but no devices found
[   17.720577] ppdev: user-space parallel port driver
[   17.901918] acpi device:35: registered as cooling_device4
[   17.901985] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:34/LNXVIDEO:01/input/input8
[   17.902086] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   17.905157] acer_wmi: Acer Laptop ACPI-WMI Extras
[   17.905168] acer_wmi: Function bitmap for Communication Button: 0x1
[   17.905373] input: Acer WMI hotkeys as /devices/virtual/input/input9
[   17.905593] input: Acer BMA150 accelerometer as /devices/virtual/input/input10
[   18.290882] intel_rapl: Found RAPL domain package
[   18.290888] intel_rapl: Found RAPL domain core
[   18.290895] intel_rapl: RAPL package 0 domain package locked by BIOS
[   18.411234] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.411542] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[   18.411551] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.411556] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   18.411562] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.411564] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   18.411570] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.411572] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   18.411577] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.411579] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   18.666638] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   18.672619] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   18.741611] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x598301f0
[   18.743050] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   18.743055] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.743057] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   18.743059] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   18.743060] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   18.743063] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x1b
[   18.743065] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   18.749670] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   18.749755] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   18.761723] [drm] Initialized drm 1.1.0 20060810
[   19.286361] [drm] radeon kernel modesetting enabled.
[   19.289049] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[   19.289052] AMD IOMMUv2 functionality not available on this system
[   19.466159] CRAT table not found
[   19.466163] Finished initializing topology ret=0
[   19.466219] kfd kfd: Initialized module
[   19.466762] [drm] initializing kernel modesetting (TURKS 0x1002:0x6741 0x1025:0x050E).
[   19.466779] [drm] register mmio base: 0xC0300000
[   19.466781] [drm] register mmio size: 131072
[   19.466834] ATOM BIOS: Acer
[   19.467009] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   19.467013] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[   19.467016] [drm] Detected VRAM RAM=1024M, BAR=256M
[   19.467018] [drm] RAM width 128bits DDR
[   19.467221] [TTM] Zone  kernel: Available graphics memory: 2013912 kiB
[   19.467223] [TTM] Initializing pool allocator
[   19.467229] [TTM] Initializing DMA pool allocator
[   19.467255] [drm] radeon: 1024M of VRAM memory ready
[   19.467258] [drm] radeon: 1024M of GTT memory ready.
[   19.467272] [drm] Loading TURKS Microcode
[   19.820540] audit: type=1400 audit(1483121561.798:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=443 comm="apparmor_parser"
[   19.820548] audit: type=1400 audit(1483121561.798:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=443 comm="apparmor_parser"
[   19.820553] audit: type=1400 audit(1483121561.798:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=443 comm="apparmor_parser"
[   19.820564] audit: type=1400 audit(1483121561.798:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=441 comm="apparmor_parser"
[   19.820571] audit: type=1400 audit(1483121561.798:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=441 comm="apparmor_parser"
[   19.820576] audit: type=1400 audit(1483121561.798:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=441 comm="apparmor_parser"
[   19.821125] audit: type=1400 audit(1483121561.798:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=443 comm="apparmor_parser"
[   19.821130] audit: type=1400 audit(1483121561.798:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=443 comm="apparmor_parser"
[   19.821363] audit: type=1400 audit(1483121561.802:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=441 comm="apparmor_parser"
[   19.821373] audit: type=1400 audit(1483121561.802:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=441 comm="apparmor_parser"
[   20.006370] cfg80211: World regulatory domain updated:
[   20.006375] cfg80211:  DFS Master region: unset
[   20.006376] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.006379] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.006381] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.006383] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.006384] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.006386] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.439542] media: Linux media interface: v0.10
[   20.516270] Linux video capture interface: v2.00
[   20.554201] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (064e:d20c)
[   20.557503] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input14
[   20.557597] usbcore: registered new interface driver uvcvideo
[   20.557599] USB Video Class driver (1.1.1)
[   20.664487] [drm] Internal thermal controller with fan control
[   20.668897] [drm] radeon: dpm initialized
[   20.755605] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   20.756337] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   20.763354] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[   20.763480] radeon 0000:01:00.0: WB enabled
[   20.763484] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800a3664c00
[   20.763486] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800a3664c0c
[   20.764935] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118
[   20.764937] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   20.764938] [drm] Driver supports precise vblank timestamp query.
[   20.764939] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   20.764986] radeon 0000:01:00.0: radeon: using MSI.
[   20.765029] [drm] radeon: irq initialized.
[   20.781554] [drm] ring test on 0 succeeded in 2 usecs
[   20.781569] [drm] ring test on 3 succeeded in 9 usecs
[   20.957522] [drm] ring test on 5 succeeded in 2 usecs
[   20.957533] [drm] UVD initialized successfully.
[   20.957826] [drm] ib test on ring 0 succeeded in 0 usecs
[   20.957880] [drm] ib test on ring 3 succeeded in 0 usecs
[   21.530821] wl: module license 'MIXED/Proprietary' taints kernel.
[   21.530830] Disabling lock debugging due to kernel taint
[   21.533261] wl: module verification failed: signature and/or required key missing - tainting kernel
[   21.605413] [drm] ib test on ring 5 succeeded
[   21.608371] wlan0: Broadcom BCM4358 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
[   21.669327] [drm] radeon atom DIG backlight initialized
[   21.669332] [drm] Radeon Display Connectors
[   21.669334] [drm] Connector 0:
[   21.669335] [drm]   LVDS-1
[   21.669337] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[   21.669338] [drm]   Encoders:
[   21.669339] [drm]     LCD1: INTERNAL_UNIPHY
[   21.669340] [drm] Connector 1:
[   21.669341] [drm]   HDMI-A-1
[   21.669342] [drm]   HPD1
[   21.669344] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   21.669345] [drm]   Encoders:
[   21.669346] [drm]     DFP1: INTERNAL_UNIPHY1
[   21.669346] [drm] Connector 2:
[   21.669347] [drm]   VGA-1
[   21.669349] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[   21.669350] [drm]   Encoders:
[   21.669351] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   21.884174] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   22.166611] init: failsafe main process (643) killed by TERM signal
[   23.346825] [drm] fb mappable at 0xB0475000
[   23.346829] [drm] vram apper at 0xB0000000
[   23.346830] [drm] size 5787648
[   23.346831] [drm] fb depth is 24
[   23.346832] [drm]    pitch is 6400
[   23.346952] fbcon: radeondrmfb (fb0) is primary device
[   30.200570] Console: switching to colour frame buffer device 200x56
[   30.207103] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   30.638108] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[   30.741296] audit_printk_skb: 165 callbacks suppressed
[   30.741297] audit: type=1400 audit(1483121572.718:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1013 comm="apparmor_parser"
[   30.784197] Bluetooth: Core ver 2.21
[   30.784217] NET: Registered protocol family 31
[   30.784218] Bluetooth: HCI device and connection manager initialized
[   30.784222] Bluetooth: HCI socket layer initialized
[   30.784225] Bluetooth: L2CAP socket layer initialized
[   30.784232] Bluetooth: SCO socket layer initialized
[   30.811561] Bluetooth: RFCOMM TTY layer initialized
[   30.811569] Bluetooth: RFCOMM socket layer initialized
[   30.811573] Bluetooth: RFCOMM ver 1.11
[   30.857448] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   30.857449] Bluetooth: BNEP filters: protocol multicast
[   30.857452] Bluetooth: BNEP socket layer initialized
[   31.222441] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full Duplex>
[   65.426853] init: plymouth-upstart-bridge main process ended, respawning
[   65.433305] init: plymouth-upstart-bridge main process (1384) terminated with status 1
[   65.433317] init: plymouth-upstart-bridge main process ended, respawning
[   80.938422] UDF-fs: error (device sr0): udf_read_inode: (ino 2293422) failed !bh
[   80.972734] UDF-fs: error (device sr0): udf_read_inode: (ino 2293421) failed !bh
[   81.006817] UDF-fs: error (device sr0): udf_read_inode: (ino 2293420) failed !bh
[   81.040598] UDF-fs: error (device sr0): udf_read_inode: (ino 2293419) failed !bh
[   81.040606] UDF-fs: Failed to read VAT inode from the last recorded block (2293422), retrying with the last block of the device (2293423).
[   81.350407] UDF-fs: INFO Mounting volume 'UDF Volume', timestamp 2015/06/17 18:30 (103c)
[ 7537.604618] systemd-hostnamed[2652]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 7948.936240] systemd-hostnamed[2740]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
kloklo28@kloklo28-Aspire-7750G:~$

kloklo28 · Le 30/12/2016, à 22:58

Depuis le rédaction de mon premier message, j'ai deux remarques à faire, la première il m’apparaît par deux fois un message avec tty1 login.... le 1er à 40 sec le 2ème à 2mn et la j'ai l'écran.
Mon Bios est bien sur le disque Dur mais j'entends le CD démarrer plusieurs fois lors du boot.
Une autre remarque j'ai un décalage d'une heure entre mon PC qui lui est à l'heure et l'envoi des messages sur le forum.

Dernière modification par kloklo28 (Le 30/12/2016, à 23:17)

hibou7 · Le 30/12/2016, à 23:13

Très bien c'est ça.
la première colonne entre crochets, c'est le temps écoulé lors de l'initialisation de la machine en sec.
À la sec 18 il y a un recommandation.

[   18.411551] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Jusquà la sec 31 il n'y a pas de trop grosse attente.

La plus grosse attente, c'est jusqu'à la seconde 7948.
Tu as vraiment attendu 132 minutes (=2h12) pour que ton système démarre?

Dernière modification par hibou7 (Le 31/12/2016, à 00:00)

hibou7 · Le 30/12/2016, à 23:24

il m’apparaît par deux fois un message avec tty1 login

Oui ça peut arriver, que lors du démarrage le système s'arrête un court moment sur la console ne t'inquiète pas pour cela.

Mon Bios est bien sur le disque Dur mais j'entends le CD démarrer plusieurs fois lors du boot.

Tu veux dire que le système - le BIOS c'est autre chose - a été installé sur le disque dur, mais malgré cela la machine tente de booter sur CD. Le lecteur CD est il vide?

Une autre remarque j'ai un décalage d'une heure entre mon PC qui lui est à l'heure et l'envoi des messages sur le forum.

Oui, moi aussi, ça n'est pas un problème.

kloklo28 · Le 30/12/2016, à 23:28

hibou7 a écrit :

La plus grosse attente, c'est jusqu'à la seconde 7948.
Tu as vraiment attendu 132 minutes (=2h21) pour que ton système démarre?

Non je n'ai jamais attendu si longtemps, au grand maximum 7 à 8 minutes. Pour info lors de la demande login je ne fais aucune action ne sachant ce que je dois faire.
Nos messages se sont croisés, je ne suis pas très rapide, c'est peut-être l'âge 73 printemps

hibou7 · Le 30/12/2016, à 23:38

7-8 minutes c'est quand même énorme.
Peux-tu en dire un peu plus sur ton système?
Quelle variantes d'ubuntu utilises-tu?
Quelle version? Une mise à niveau (migration) a-t-elle eu lieu?
Quel modèle d'ordi?

[EDIT] le dmesg semble indiquer (dernières lignes) qu'il y a un problème avec systemd.
Tu pourrais tenter de démarrer avec upstart (as-tu cette option au démarrage?) ou alors installer le paquet supplémentaire libnss-myhostname par Synaptic.

Dernière modification par hibou7 (Le 30/12/2016, à 23:45)

kloklo28 · Le 30/12/2016, à 23:48

J'ai saisi l'histoire des crochets qui donnent le temps, effectivement la dernière ligne peut chagriner, bref.
je me suis mal exprimé, sur le setup du PC j'ai bien en premier le disque dur du PC le lecteur de DVD est en 3 car il y a un emplacement pour un second DD
Le lecteur de disque est vide.

J'ai planché cet après midi pour installer dans la barre en haut du bureau Unity un indicateur pour CapsLock et connecter mon imprimante en wifi, un peu hard mais tout est fonctionnel.

Deux minutes ce n'est pas catastrophique, mais mon Win10 avec un SSD à l'allure d'une ferrarri, un peu d'humour ça fat pas de mal.

kloklo28 · Le 31/12/2016, à 11:00

Modifier l'heure dans profil, mettre greenwich l'heure d'envoi est en correspondance avec le PC

Dernière modification par kloklo28 (Le 31/12/2016, à 11:01)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 29/12/2016, à 17:19

Configuration carte graphique (résolu)

#2 Le 30/12/2016, à 02:04

Re : Configuration carte graphique (résolu)

#3 Le 30/12/2016, à 12:48

Re : Configuration carte graphique (résolu)

#4 Le 30/12/2016, à 15:25

Re : Configuration carte graphique (résolu)

#5 Le 30/12/2016, à 18:59

Re : Configuration carte graphique (résolu)

#6 Le 30/12/2016, à 22:16

Re : Configuration carte graphique (résolu)

#7 Le 30/12/2016, à 22:44

Re : Configuration carte graphique (résolu)

#8 Le 30/12/2016, à 22:58

Re : Configuration carte graphique (résolu)

#9 Le 30/12/2016, à 23:13

Re : Configuration carte graphique (résolu)

#10 Le 30/12/2016, à 23:24

Re : Configuration carte graphique (résolu)

#11 Le 30/12/2016, à 23:28

Re : Configuration carte graphique (résolu)

#12 Le 30/12/2016, à 23:38

Re : Configuration carte graphique (résolu)

#13 Le 30/12/2016, à 23:48

Re : Configuration carte graphique (résolu)

#14 Le 31/12/2016, à 11:00

Re : Configuration carte graphique (résolu)

Pied de page des forums