#26 Le 14/02/2017, à 08:49
- moko138
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
1) UEFI
Pour l'UEFI, je suis incompétent, vois malbo ou Bougron. Mais, si tu utilises plusieurs systèmes dans ton pc, il est quasi obligatoire qu'ils soient tous installés dans le même mode, soit legacy, soit uefi.
- -
2) Partitionnement
sdb est ta clef d'installation
et sur sda, il n'y a qu'une partition (105 MB fat32 boot, esp)
Donc
soit tu fais toutes les partitions de sda à la main avant d'installer (là, si c'est ce que tu as voulu, on dirait que tu as oublié de valider tes choix dans gparted),
soit tu choisis "installer sur l'ensemble du disque".
- -
3) Accumulation de noyaux
Contre le bug des noyaux, il suffit d'appliquer une seule fois - combien de fois faudra-t-il le dire ??? - les six denières commandes de ce message de nany : ./viewtopic.php?pid=21300891#p21300891.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#27 Le 14/02/2017, à 12:22
- Compte supprimé
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Stop moko138 
Ce n'est pas à moi qu'il faut dire qu'il faut appliquer un script ou une méthode pour corriger l’inacceptable dans système informatique non-fini.
Il y a des développeurs qui pourraient mettre ton script dans une mise à jour, non ?
En attendant, bon nombre de débutants installent Ubuntu et ne se méfient pas de cette anomalie.
Demandons à emena si c'est normal de devoir nettoyer à la main un système informatique qui s'engorge ? ou si c'est normal de devoir appliquer un patch (le script que moko138 cite) ?
Au moins, autrefois avec GRUB1, le paramètre #howmany=3 réglait le problème, en ne gardant que les 3 derniers noyaux, ça c'est normal, il n'y avait pas besoin de sortir l'armada informatique.
#28 Le 15/02/2017, à 10:43
- emena
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Oups,
La, je ne comprend pas tout à fait de quoi vous parlez et à quoi servent ces procédures puisque j'installe un disque en effaçant tout. Je vais étudier cela.
Mon idée, c'est de pouvoir gérer des disques de plusieurs téra. Par ailleurs, puisque l'efi est censé être l'avenir, je me suis dit que j'allais installer en efi, la dernière installation, celle avec le disque en erreur, était de ce type.
le problème : si j'essaye avec une partition efi et que je mets les partition "/" et swap", le programme d'installation ne reconnaît pas de partition pour le boot, il me dit qu'il 'il doit y avoir une partition séparée pour le boot loader (bios)'
Si je prend l'option effacer et installer, il dit qu'il n'arrive pas a écrire le grub.
Bon, je vais faire quelques tests plus approfondi sur ce nouveau disque avec ma chance actuelle, il aura aussi un problème.
Enfin un point positif, le système ne se fige plus quand je suis sur le DVD d'installation, cela conforte l'idée que le problème venait du disque dur.
EM
Dernière modification par emena (Le 15/02/2017, à 11:40)
Ubuntu 22.04.4 LTS
Hors ligne
#29 Le 15/02/2017, à 10:52
- emena
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Question,
Est-ce qu'il y a des version de disque incompatible avec l'EFI ?
Je n'y avais pas pensé, je vais chercher, celui que j'essaye est Old_age
sudo smartctl -a /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green
Device Model: WDC WD10EADS-22M2B0
Serial Number: WD-WMAV50891595
LU WWN Device Id: 5 0014ee 001e38820
Firmware Version: 01.00A01
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Feb 15 09:21:09 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (20760) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 239) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 122 110 021 Pre-fail Always - 6858
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3306
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 11329
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3299
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 177
193 Load_Cycle_Count 0x0032 136 136 000 Old_age Always - 193879
194 Temperature_Celsius 0x0022 115 105 000 Old_age Always - 32
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 192 192 000 Old_age Always - 1465
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 15
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 142 114 000 Old_age Offline - 11605
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 11329 1149030779
# 2 Short offline Completed: read failure 90% 11329 1149030779
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.EM
Dernière modification par emena (Le 15/02/2017, à 11:36)
Ubuntu 22.04.4 LTS
Hors ligne
#30 Le 15/02/2017, à 11:44
- Compte supprimé
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Bonjour emena, quel est ton support d'installation, et la version ?
(je ne suis pas certain que Ubuntu 14.04 LTS supporte correctement EFI, la 16.04LTS doit mieux supporter, il peut y avoir des images ISOs spéciales pour EFI).
L'EFI n'est pas vraiment l'avenir, il a surtout été détourné par microsoft pour limiter les installation autres que windows.
Cependant, l'EFI EXIGE une partition de boot EFI - si tu ne peux pas désactiver ce mode dans le BIOS-EFI.
À lire :
uefi
et
[Tuto] Installer Ubuntu en mode EFI ou en mode BIOS
PS : je discutais juste d'un bogue conceptuel d'Ubuntu qui grossit avec les mises à jour, si on n'est pas informaticien ou passionné averti pour palier ce bogue mettant en panne Ubuntu avec le remplissage de la partition racine / suite aux mises à jours successives du noyau.
moko138 oublie qu'il a été débutant - et je repense toujours à mes galères sur ce nouveaux système en tant que débutant Debian en 2003.
Mark SHUTTLEWORTH, fondateur d'Ubuntu, l'indique lui-même : « Chaque manipulation réalisée à l'aide de lignes de commande est un bug qu'il faut corriger ». Cela montre la forte orientation vers l'utilisateur de cette distribution.
Ce n'est pas que moi qui pense ça moko138 ! 
#31 Le 15/02/2017, à 11:50
- Compte supprimé
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
emena, tu fais comme tu veux/peux (je suis conscient que des fois on voudrait, mais on ne peut pas acheter un disque dur neuf, sans erreur).
197 Current_Pending_Sector 0x0032 192 192 000 Old_age Always - 1465
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 15Si tu veux continuer avec ce disque, au risque des pertes de temps-argent (le temps c'est de l'argent), alors il faut que tu corriges ces erreurs.
Au hasard, pour inspirer tes recherches complémentaires :
Forcer un disque à réallouer des secteurs défectueux
et/ou
Linux : Corriger des secteurs défecteux sur un disque
édit : ça prolonge un peu la vie du disque qui n'est pas fiable (il a commencé à lâcher), mais cela permet d'économiser avant l'achat du disque suivant.
Dernière modification par Compte supprimé (Le 15/02/2017, à 11:52)
#32 Le 15/02/2017, à 15:38
- emena
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
deux disques nazes !
Après le processeur et là carte mère cet été, qui dit mieux ?
Bon ça doit être ça parce que des installations j'en ai fait plusieurs en bios et en efi, Je ne voyais pas de raison pour que ce que j'ai fais ne marche pas. J'ai toujours fait ainsi.
Je suis bonne pour aller acheter un disque dur, je n'en ai plus qu'un complet sans erreur, mais il a mon backup dessus, pas question que je le touche avant de pouvoir en faire un backup.
Dernière modification par emena (Le 15/02/2017, à 15:38)
Ubuntu 22.04.4 LTS
Hors ligne
#33 Le 15/02/2017, à 16:33
- moko138
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Je confirme que ce disque est mourant.
De plus, les WD "Caviar Green" étaient conçus uniquement pour le stockage de données, pas pour supporter un système d'exploitation.
À présent, pour éviter la mauvaise réputation des "caviar green", WD a fusionné les gammes "green" et "blue". Donc je ne conseille pas les WD blue non plus.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#34 Le 15/02/2017, à 16:41
- moko138
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Ludovic a écrit :
moko138 oublie qu'il a été débutant
Au contraire ! Mon goût personnel me porte vers le nettoyage à la main,
mais à ceux qui cherchent une utilisation sans souci, je conseille les 6 lignes de nany, parce qu'en les exécutant UNE fois, on se met définitivement à l'abri des accumulations de noyaux.
Tenter d'en dissuader tout le monde, c'est faire fi des préférences de chacun et lui fermer a priori une porte.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#35 Le 15/02/2017, à 16:52
- Compte supprimé
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
moko138 a écrit :
Ludovic a écrit :moko138 oublie qu'il a été débutant
Au contraire ! Mon goût personnel me porte vers le nettoyage à la main,
mais à ceux qui cherchent une utilisation sans souci, je conseille les 6 lignes de nany, parce qu'en les exécutant UNE fois, on se met définitivement à l'abri des accumulations de noyaux.Tenter d'en dissuader tout le monde, c'est faire fi des préférences de chacun et lui fermer a priori une porte.
Je ne tente pas du tout de l'en dissuader, au contraire, c'est la solution la plus simple, en attendant une correction de bogue urgente, rétablissant le paramètre #howmany dans GRUB-PC (ou GRUB 2), comme il était possible et simple de le faire dans GRUB 1.
#36 Le 15/02/2017, à 16:55
- Compte supprimé
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
J'ajoute que je remercie nany d'avoir fait la rédaction de ces lignes, qui patche le problème.
Mon oncle connaît Ubuntu depuis quelques années, mais sera incapable de faire cette opération non-user-friendly.
Tu ne te rends pas bien compte, je pense, moko138, que des gens sont ALLERGIQUES à la console.
#37 Le 15/02/2017, à 18:31
- moko138
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Fin du HS, en ce qui me concerne.
Ludovic, si tu veux continuer, le fil de nany est en ./viewtopic.php?id=1970941&p=1.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#38 Le 15/02/2017, à 18:53
- emena
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Hello,
Je ne m'était jamais posé la question des marques de disques, le reste oui, mais pas les disques. Idiot quand même quand on y pense.
Vous en avez à me recommander ?
Merci de toute vos réponses, même pour le patch que je n'est pas encore compris, mais ça viendra, je m'y mettrais Bientôt .:)
EM
Ubuntu 22.04.4 LTS
Hors ligne
#39 Le 15/02/2017, à 19:11
- moko138
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Pour les 3 To et plus, Ludovic a des statistiques récentes.
Mais pour installer un système, un petit disque suffit.
Les dernières stat' que je connaisse remontent à 3 ans et demi et n'incorporaient pas encore de SSD : ./viewtopic.php?pid=16222871#p16222871.
PPdM, qui gère professionnellement un gros parc de pc, conseille en plus de ne pas mettre le(s) système(s) sur le même disque que les données.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#40 Le 15/02/2017, à 19:19
- emena
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Hello,
Il met le home entier sur un autre disque ou seulement ses propres données ?
Je pense par exemple aux identités de mozilla. Je m'étais mise à sauvegarder tout le home pour ce type de données parfois bien utiles à récupérer.
1To ou 2 me suffisent, surtout si je split
Em
Ubuntu 22.04.4 LTS
Hors ligne
#41 Le 15/02/2017, à 20:42
- packard
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Salut, voila les dernières statistiques pour les disques dur :https://www.nextinpact.com/news/103121- … s-durs.htm
Linux Mint Mate 19.3 Tricia LTS + Seven+ W 10
PC 1 : Asrock 970 Extrème 4 .AMD FX 8350 Black E, Nvidia GTX 1050 TI, RAM : 16 Go Ballistik ,1 SSD Hyper X Savage + Kingston SSDNow UV400 + SSD Samsung.
PC 2 : Gigabyte GA-MA770A-DS-3P , Phenom II X4 965 Black E, Nvidia GTX 650 TI
Portables : DELL Latitude E 6410: i7-640M + Latiude E5530 : I5-3230M.
Hors ligne
#42 Le 15/02/2017, à 21:47
- moko138
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
emena a écrit :
Il met le home entier sur un autre disque ou seulement ses propres données ?
Je pense par exemple aux identités de mozilla. Je m'étais mise à sauvegarder tout le home pour ce type de données parfois bien utiles à récupérer.
L'idée étant que les écritures incessantes usent un disque,
je suppose que PPdM préfère isoler ses données sur un autre disque, tandis que le petit reste du home demeure avec le système.
En tout cas, c'est ce que je pratiquerais si j'avais deux disques dans mes pc.(*)
Et pour ton ou tes profils mozilla, rien ne t'empêche de sauvegarder ~/.mozilla/ et ~/.cache/mozilla/, après purge de leur "contenu web en cache", une fois par semaine, sur le disque des données.
(*) Même avec un seul disque, je pratique déjà { racine + home } sur une même partition, et données sur une autre, car ça offre deux gros avantages :
- facilité d'avoir plusieurs systèmes co-installés, avec accès aux mêmes données,
- facilité de faire une installation ou réinstallation sans perturbation des données (là, tu dois te sentir concernée ! )
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#43 Le 15/02/2017, à 22:33
- emena
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
moko138 a écrit :
(là, tu dois te sentir concernée !
un disque système, un disque de donnée, un disque de backup, c'est faisable. Si c'est le prix pour avoir la paix, je signe.
A priori, c'est le disque système qui est le plus sollicités, non ?
Connaissez-vous des tuto pas trop compliqué pour la surveillance des disques ?
EM
Dernière modification par emena (Le 15/02/2017, à 22:36)
Ubuntu 22.04.4 LTS
Hors ligne
#44 Le 15/02/2017, à 23:57
- Compte supprimé
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Emena, à chacun sa recette en fonction de ses moyens et priorités
Personnellement, je ne veux plus de disque durs dans mes ordinateurs, passés sous SSD, voire clés USB partitionnées et formatées comme disques durs :
ubuntu@ubuntu-64:~$ sudo fdisk -l /dev/sda
[sudo] Mot de passe de ubuntu :
Disque /dev/sda : 115,7 GiB, 124218507264 octets, 242614272 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xa0ff6299
Périphérique Amorçage Start Fin Secteurs Size Id Type
/dev/sda1 * 2048 35765719 35763672 17,1G 83 Linux
/dev/sda2 35766272 37814271 2048000 1000M 82 partition d'échange Linux / Solaris
/dev/sda3 37814272 242614271 204800000 97,7G 83 Linux
ubuntu@ubuntu-64:~$ et
ubuntu@ubuntu-64:~$ df -H |grep -v udev|grep -v tmpfs
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
/dev/sda1 18G 7,2G 9,9G 42% /
/dev/sda3 104G 78G 20G 80% /home
/dev/sdc1 1,0T 684G 316G 69% /media/ubuntu/TNT-1To
192.168.1.200:/volume1/Datas/Données 3,0T 2,9T 130G 96% /media/NASEn l'occurrence, c'est une clé USB de 128 Go, je fais pratiquement pareil pour un SSD de 128 Go.
C'est un système cache 0 dB (je ne supporte pas le bruit). L'alimentation de mon ordinateur principal est fanless également.
Il n'y a plus que les électrons qui tournent, mais je n'entends pas le bruit thermique que cela génère
Mes données communes (photographies, vidéos, documents, PDF, projets musicaux, …) principales sont sur le NAS en RAID1 logiciel, un étage dessous moi.
J'édite mes documents dans /home, je sauvegarde manuellement vers le NAS avec le logiciel FreeFileSync (indiqué par PPdM) et je garde quelques archives sur disques durs externes débranchés (en cas de foudre : plus d'ordinateur ni de NAS - mais les fichiers personnels auront une chance de survivre, sauf incendie).
à+
L_d_v_c@
#45 Le 16/02/2017, à 00:25
- Compte supprimé
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
emena a écrit :
…
Connaissez-vous des tuto pas trop compliqué pour la surveillance des disques ?EM
sudo apt install smart-notifier smartmontools gsmartcontrolÇa affichera les alertes à l'écran.
sudo /etc/init.d/smartmontools start
[ ok ] Starting smartmontools (via systemctl): smartmontools.service.
sudo sh -c 'echo test de message | smart-notifier --notify'Alors ensuite, tu installes smartmontools, mais il faut encore le configurer not-user-friendly :
https://doc.ubuntu-fr.org/smartmontools a écrit :
Par défaut, le demon smart n'est pas activé. Il est indispensable de le faire manuellement.
Éditez le fichier /etc/default/smartmontools et décommenter start_smartd=yes puis démarrer le service en tapant dans un terminal:
sudo /etc/init.d/smartmontools start
En tout cas c'est censé afficher les alertes à l'écran, il faut peut-être redémarrer ou j'ai oublié quelque chose ? moko138 ?
Puis tu peux éditer /etc/smartd.conf et mettre ton adresse mél après l'option -m, but-this-is-not-user-friendly pour recevoir les alertes sur ta boite mél :
sudo gedit /etc/smartd.confJe suis trop vieux pour comprendre pourquoi un truc qu'on vient d'installer, ne fonctionne pas directement.
Ça me rappelle windows : voulez-vous installer ? êtes-vous sûr de vouloir installer ? voulez-vous continuer ? attention, l'installation … appuyez sur continuer, continuer, continuer, suivant, suivant, suivant…
Aïe mes aïeux !
Dernière modification par Compte supprimé (Le 16/02/2017, à 00:25)
#46 Le 16/02/2017, à 22:55
- emena
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Hello,
Juste un petit mot pour vous dire qu'installer avec un nouveau disque, c'est un plaisir:). ça prend beaucoup moins de temps !
Demain, je vais remettre tous mes logiciels se sera un bon test pour savoir mes problèmes de plantage se reproduisent, mais pour le moment, je ne pense pas. J'ai déjà passé le cap fatidique des 10 première minutes.
En tout cas, en cas de problèmes, je continuerais à penser à mes erreurs potentielles, mais j'ajouterais les pannes de matériel à ma check list.
Bonne soirée
EM
Ubuntu 22.04.4 LTS
Hors ligne
#47 Le 19/02/2017, à 20:17
- emena
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Hello,
il semble qu'il y ai eu deux problème.
Tout va bien, sauf quand je lance thunderbird.
Je vais chercher un peu avant de mettre résolu.
Bon dilmanche
Ubuntu 22.04.4 LTS
Hors ligne
#48 Le 20/02/2017, à 01:07
- Compte supprimé
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Bonsoir emena,
tu peux lancer tes applications à partir d'une console afin de voir la sortie des codes erreurs que tu ne verrais pas à partir d'une exécution graphique.
Par exemple :
ubuntu@ubuntu-64:~$ thunderbird
ubuntu@ubuntu-64:~$ Dernière modification par Compte supprimé (Le 20/02/2017, à 01:07)
#49 Le 20/02/2017, à 19:36
- emena
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Hello,
Je vais essayer cela, bonne idée.
En attendant que cela se reproduise, ce n'est pas immédiat, j'ai fait un dmesg au démarrage.
Il y a cinq erreurs.
bizarre en dehors de thunderbird, ça marche
EM
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-62-generic (buildd@lcy01-30) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #83-Ubuntu SMP Wed Jan 18 14:10:15 UTC 2017 (Ubuntu 4.4.0-62.83-generic 4.4.40)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic root=UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a8f9bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a8f9c000-0x00000000a8fcafff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000a8fcb000-0x00000000aabf3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aabf4000-0x00000000aabf4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000aabf5000-0x00000000aac1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aac1f000-0x00000000b0765fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b0766000-0x00000000b1e46fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b1e47000-0x00000000b1e69fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b1e6a000-0x00000000b2065fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b2066000-0x00000000b279efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b279f000-0x00000000b32fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b32ff000-0x00000000b32fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b3300000-0x00000000b5ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000245ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/B150M-A/M.2, BIOS 0403 05/06/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x246000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00B8000000 mask 7FF8000000 uncachable
[ 0.000000] 2 base 00B4000000 mask 7FFC000000 uncachable
[ 0.000000] 3 base 00B3800000 mask 7FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xb3300 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcc50-0x000fcc5f] mapped at [ffff8800000fcc50]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
[ 0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[ 0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[ 0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[ 0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x337fe000-0x35bf6fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000A8F9C0A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000A8FBF598 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000A8F9C1F8 023399 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000B279EF80 000040
[ 0.000000] ACPI: APIC 0x00000000A8FBF6A8 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000A8FBF730 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000A8FBF778 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000A8FBF818 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000A8FBF858 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x00000000A8FBF890 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x00000000A8FBFC00 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000A8FBFC98 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000A8FBFEE0 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000A8FC2A90 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000A8FC3678 0004A3 (v02 INTEL zpodd 00001000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x00000000A8FC3B20 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x00000000A8FC3B58 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000A8FC3BB0 000705 (v02 INTEL xh_rvp08 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000A8FC42B8 005359 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000A8FC9618 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000A8FC9660 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x00000000A8FCA530 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000245ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x245ff5000-0x245ff9fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000245ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a8f9bfff]
[ 0.000000] node 0: [mem 0x00000000a8fcb000-0x00000000aabf3fff]
[ 0.000000] node 0: [mem 0x00000000aac1f000-0x00000000b0765fff]
[ 0.000000] node 0: [mem 0x00000000b1e6a000-0x00000000b2065fff]
[ 0.000000] node 0: [mem 0x00000000b32ff000-0x00000000b32fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000245ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000245ffffff]
[ 0.000000] On node 0 totalpages: 2058404
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11237 pages used for memmap
[ 0.000000] DMA32 zone: 719113 pages, LIFO batch:31
[ 0.000000] Normal zone: 20864 pages used for memmap
[ 0.000000] Normal zone: 1335296 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa8f9c000-0xa8fcafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaabf4000-0xaabf4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaabf5000-0xaac1efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb0766000-0xb1e46fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb1e47000-0xb1e69fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb2066000-0xb279efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb279f000-0xb32fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb3300000-0xb5ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb6000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xb6000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff880245c00000 s98264 r8192 d28712 u524288
[ 0.000000] pcpu-alloc: s98264 r8192 d28712 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2026218
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic root=UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7980248K/8233616K available (8436K kernel code, 1291K rwdata, 3960K rodata, 1488K init, 1316K bss, 253368K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1024 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 2712.067 MHz processor
[ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.13 BogoMIPS (lpj=10848268)
[ 0.000027] pid_max: default: 32768 minimum: 301
[ 0.000031] ACPI: Core revision 20150930
[ 0.025212] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20150930/dswload-210)
[ 0.025216] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150930/psobject-227)
[ 0.025262] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20150930/tbxfload-193)
[ 0.033038] ACPI Error: 1 table load failures, 8 successful (20150930/tbxfload-214)
[ 0.033054] Security Framework initialized
[ 0.033055] Yama: becoming mindful.
[ 0.033067] AppArmor: AppArmor initialized
[ 0.033462] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.034707] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.035244] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.035251] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.035399] Initializing cgroup subsys io
[ 0.035401] Initializing cgroup subsys memory
[ 0.035405] Initializing cgroup subsys devices
[ 0.035407] Initializing cgroup subsys freezer
[ 0.035408] Initializing cgroup subsys net_cls
[ 0.035410] Initializing cgroup subsys perf_event
[ 0.035411] Initializing cgroup subsys net_prio
[ 0.035413] Initializing cgroup subsys hugetlb
[ 0.035415] Initializing cgroup subsys pids
[ 0.035435] CPU: Physical Processor ID: 0
[ 0.035436] CPU: Processor Core ID: 0
[ 0.036510] mce: CPU supports 10 MCE banks
[ 0.036525] CPU0: Thermal monitoring enabled (TM1)
[ 0.036535] process: using mwait in idle threads
[ 0.036537] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.036538] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.036832] Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
[ 0.038348] ftrace: allocating 32065 entries in 126 pages
[ 0.049682] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.049683] smpboot: Max logical packages: 1
[ 0.050884] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.054033] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.093722] TSC deadline timer enabled
[ 0.093727] smpboot: CPU0: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.093738] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
[ 0.093762] ... version: 4
[ 0.093763] ... bit width: 48
[ 0.093763] ... generic registers: 8
[ 0.093764] ... value mask: 0000ffffffffffff
[ 0.093765] ... max period: 00007fffffffffff
[ 0.093765] ... fixed-purpose events: 3
[ 0.093766] ... event mask: 00000007000000ff
[ 0.094414] x86: Booting SMP configuration:
[ 0.094415] .... node #0, CPUs: #1
[ 0.097833] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.097882] #2 #3
[ 0.104936] x86: Booted up 1 node, 4 CPUs
[ 0.104939] smpboot: Total of 4 processors activated (21696.53 BogoMIPS)
[ 0.107910] devtmpfs: initialized
[ 0.109757] evm: security.selinux
[ 0.109758] evm: security.SMACK64
[ 0.109758] evm: security.SMACK64EXEC
[ 0.109759] evm: security.SMACK64TRANSMUTE
[ 0.109760] evm: security.SMACK64MMAP
[ 0.109760] evm: security.ima
[ 0.109761] evm: security.capability
[ 0.109804] PM: Registering ACPI NVS region [mem 0xaabf4000-0xaabf4fff] (4096 bytes)
[ 0.109805] PM: Registering ACPI NVS region [mem 0xb2066000-0xb279efff] (7573504 bytes)
[ 0.109928] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.109992] pinctrl core: initialized pinctrl subsystem
[ 0.110147] RTC time: 17:17:00, date: 02/20/17
[ 0.111122] NET: Registered protocol family 16
[ 0.119770] cpuidle: using governor ladder
[ 0.131762] cpuidle: using governor menu
[ 0.131771] PCCT header not found.
[ 0.131868] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.131869] ACPI: bus type PCI registered
[ 0.131870] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.131934] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.131936] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.131942] PCI: Using configuration type 1 for base access
[ 0.144069] ACPI: Added _OSI(Module Device)
[ 0.144071] ACPI: Added _OSI(Processor Device)
[ 0.144072] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.144073] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.150886] ACPI: Executed 25 blocks of module-level executable AML code
[ 0.156293] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.158945] ACPI: Dynamic OEM Table Load:
[ 0.158950] ACPI: SSDT 0xFFFF88023BC3A000 0005FD (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.159700] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.160960] ACPI: Dynamic OEM Table Load:
[ 0.160966] ACPI: SSDT 0xFFFF88023BDA9000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.162180] ACPI: Dynamic OEM Table Load:
[ 0.162184] ACPI: SSDT 0xFFFF88023BC3A800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.163146] ACPI: Dynamic OEM Table Load:
[ 0.163149] ACPI: SSDT 0xFFFF88023BE48200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.165503] ACPI: Interpreter enabled
[ 0.165534] ACPI: (supports S0 S3 S4 S5)
[ 0.165535] ACPI: Using IOAPIC for interrupt routing
[ 0.165563] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.167305] ACPI: Power Resource [PG00] (on)
[ 0.167622] ACPI: Power Resource [PG01] (on)
[ 0.167913] ACPI: Power Resource [PG02] (on)
[ 0.170195] ACPI: Power Resource [WRST] (on)
[ 0.170502] ACPI: Power Resource [WRST] (on)
[ 0.170814] ACPI: Power Resource [WRST] (on)
[ 0.171120] ACPI: Power Resource [WRST] (on)
[ 0.171425] ACPI: Power Resource [WRST] (on)
[ 0.171730] ACPI: Power Resource [WRST] (on)
[ 0.172034] ACPI: Power Resource [WRST] (on)
[ 0.172337] ACPI: Power Resource [WRST] (on)
[ 0.172641] ACPI: Power Resource [WRST] (on)
[ 0.172947] ACPI: Power Resource [WRST] (on)
[ 0.173255] ACPI: Power Resource [WRST] (on)
[ 0.173559] ACPI: Power Resource [WRST] (on)
[ 0.173865] ACPI: Power Resource [WRST] (on)
[ 0.174174] ACPI: Power Resource [WRST] (on)
[ 0.174480] ACPI: Power Resource [WRST] (on)
[ 0.174784] ACPI: Power Resource [WRST] (on)
[ 0.175087] ACPI: Power Resource [WRST] (on)
[ 0.175389] ACPI: Power Resource [WRST] (on)
[ 0.175693] ACPI: Power Resource [WRST] (on)
[ 0.175997] ACPI: Power Resource [WRST] (on)
[ 0.182079] ACPI: Power Resource [FN00] (off)
[ 0.182149] ACPI: Power Resource [FN01] (off)
[ 0.182219] ACPI: Power Resource [FN02] (off)
[ 0.182287] ACPI: Power Resource [FN03] (off)
[ 0.182355] ACPI: Power Resource [FN04] (off)
[ 0.183377] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.183383] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.183408] \_SB_.PCI0:_OSC invalid UUID
[ 0.183409] _OSC request data:1 1f 0
[ 0.183412] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.183943] PCI host bridge to bus 0000:00
[ 0.183946] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.183947] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.183949] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.183950] pci_bus 0000:00: root bus resource [mem 0xb8000000-0xf7ffffff window]
[ 0.183951] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.183952] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.183958] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[ 0.184212] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.184245] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.184342] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.184392] pci 0000:00:02.0: [8086:1912] type 00 class 0x038000
[ 0.184404] pci 0000:00:02.0: reg 0x10: [mem 0xf4000000-0xf4ffffff 64bit]
[ 0.184410] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.184415] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.184569] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.184594] pci 0000:00:14.0: reg 0x10: [mem 0xf7210000-0xf721ffff 64bit]
[ 0.184645] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.184771] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.184823] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.184853] pci 0000:00:16.0: reg 0x10: [mem 0xf722d000-0xf722dfff 64bit]
[ 0.184907] pci 0000:00:16.0: PME# supported from D3hot
[ 0.185029] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.185049] pci 0000:00:17.0: reg 0x10: [mem 0xf7228000-0xf7229fff]
[ 0.185055] pci 0000:00:17.0: reg 0x14: [mem 0xf722c000-0xf722c0ff]
[ 0.185062] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.185068] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.185074] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.185081] pci 0000:00:17.0: reg 0x24: [mem 0xf722b000-0xf722b7ff]
[ 0.185108] pci 0000:00:17.0: PME# supported from D3hot
[ 0.185219] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[ 0.185270] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.185365] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.185417] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.185472] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.185563] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.185614] pci 0000:00:1f.0: [8086:a148] type 00 class 0x060100
[ 0.185804] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.185816] pci 0000:00:1f.2: reg 0x10: [mem 0xf7224000-0xf7227fff]
[ 0.185960] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.185993] pci 0000:00:1f.3: reg 0x10: [mem 0xf7220000-0xf7223fff 64bit]
[ 0.186023] pci 0000:00:1f.3: reg 0x20: [mem 0xf7200000-0xf720ffff 64bit]
[ 0.186057] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.186183] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.186216] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.186269] pci 0000:00:1f.4: reg 0x10: [mem 0xf722a000-0xf722a0ff 64bit]
[ 0.186338] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.186530] pci 0000:01:00.0: [10de:00c3] type 00 class 0x030000
[ 0.186546] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.186554] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.186562] pci 0000:01:00.0: reg 0x1c: [mem 0xf5000000-0xf5ffffff 64bit]
[ 0.186572] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf701ffff pref]
[ 0.186608] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.193005] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.193036] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf70fffff]
[ 0.193039] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.193095] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.193129] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.193153] pci 0000:02:00.0: reg 0x18: [mem 0xf7104000-0xf7104fff 64bit]
[ 0.193168] pci 0000:02:00.0: reg 0x20: [mem 0xf7100000-0xf7103fff 64bit]
[ 0.193232] pci 0000:02:00.0: supports D1 D2
[ 0.193233] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193275] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.201014] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.201044] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.201046] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.201101] acpiphp: Slot [1] registered
[ 0.201109] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 0.202862] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.202904] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.202943] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.202982] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.203020] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.203058] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.203097] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.203135] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.203487] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.203576] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.203578] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.203579] vgaarb: loaded
[ 0.203579] vgaarb: bridge control possible 0000:01:00.0
[ 0.203752] SCSI subsystem initialized
[ 0.203775] libata version 3.00 loaded.
[ 0.203791] ACPI: bus type USB registered
[ 0.203803] usbcore: registered new interface driver usbfs
[ 0.203808] usbcore: registered new interface driver hub
[ 0.203818] usbcore: registered new device driver usb
[ 0.203922] PCI: Using ACPI for IRQ routing
[ 0.210590] PCI: pci_cache_line_size set to 64 bytes
[ 0.210629] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.210630] e820: reserve RAM buffer [mem 0xa8f9c000-0xabffffff]
[ 0.210631] e820: reserve RAM buffer [mem 0xaabf4000-0xabffffff]
[ 0.210632] e820: reserve RAM buffer [mem 0xb0766000-0xb3ffffff]
[ 0.210633] e820: reserve RAM buffer [mem 0xb2066000-0xb3ffffff]
[ 0.210634] e820: reserve RAM buffer [mem 0xb3300000-0xb3ffffff]
[ 0.210635] e820: reserve RAM buffer [mem 0x246000000-0x247ffffff]
[ 0.210725] NetLabel: Initializing
[ 0.210726] NetLabel: domain hash size = 128
[ 0.210726] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.210736] NetLabel: unlabeled traffic allowed by default
[ 0.210817] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.210821] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.212856] amd_nb: Cannot enumerate AMD northbridges
[ 0.212867] clocksource: Switched to clocksource hpet
[ 0.217115] AppArmor: AppArmor Filesystem Enabled
[ 0.217155] pnp: PnP ACPI init
[ 0.217319] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.217322] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217664] pnp 00:01: [dma 0 disabled]
[ 0.217766] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.218019] pnp 00:02: [dma 0 disabled]
[ 0.218051] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.218215] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.218216] system 00:03: [io 0xffff] has been reserved
[ 0.218218] system 00:03: [io 0xffff] has been reserved
[ 0.218219] system 00:03: [io 0xffff] has been reserved
[ 0.218220] system 00:03: [io 0x1800-0x18fe] could not be reserved
[ 0.218221] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.218223] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.218291] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.218293] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.218309] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.218336] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.218338] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.218532] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.218534] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.218535] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.218537] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.218538] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.218539] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.218541] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.218542] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.218543] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.218545] system 00:07: [mem 0xf7fc0000-0xf7fdffff] has been reserved
[ 0.218546] system 00:07: [mem 0xb3400000-0xb7fffffe] could not be reserved
[ 0.218548] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.218579] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.218581] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.218582] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.218583] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.218585] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.218586] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.218587] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.218589] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.218811] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.218813] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.219660] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.219662] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.219663] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.219665] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.220310] pnp: PnP ACPI: found 11 devices
[ 0.228416] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.228435] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.228437] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.228439] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[ 0.228442] pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.228443] pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.228445] pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.228446] pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.228448] pci 0000:00:1d.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.228449] pci 0000:00:1d.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.228451] pci 0000:00:1d.0: BAR 14: assigned [mem 0xb8000000-0xb81fffff]
[ 0.228455] pci 0000:00:1d.0: BAR 15: assigned [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.228457] pci 0000:00:1d.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.228458] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.228461] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf70fffff]
[ 0.228463] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.228466] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.228468] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.228471] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.228476] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 0.228479] pci 0000:00:1d.0: bridge window [io 0x2000-0x2fff]
[ 0.228483] pci 0000:00:1d.0: bridge window [mem 0xb8000000-0xb81fffff]
[ 0.228485] pci 0000:00:1d.0: bridge window [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.228490] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.228491] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.228492] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.228493] pci_bus 0000:00: resource 7 [mem 0xb8000000-0xf7ffffff window]
[ 0.228494] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.228496] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf70fffff]
[ 0.228497] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.228498] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.228499] pci_bus 0000:02: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.228500] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.228501] pci_bus 0000:03: resource 1 [mem 0xb8000000-0xb81fffff]
[ 0.228502] pci_bus 0000:03: resource 2 [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.228523] NET: Registered protocol family 2
[ 0.228626] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.228715] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.228796] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.228811] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.228828] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.228881] NET: Registered protocol family 1
[ 0.233589] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.233592] PCI: CLS 0 bytes, default 64
[ 0.233622] Trying to unpack rootfs image as initramfs...
[ 0.715807] Freeing initrd memory: 36836K (ffff8800337fe000 - ffff880035bf7000)
[ 0.715817] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.715819] software IO TLB [mem 0xac766000-0xb0766000] (64MB) mapped at [ffff8800ac766000-ffff8800b0765fff]
[ 0.715943] Scanning for low memory corruption every 60 seconds
[ 0.716236] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.716255] audit: initializing netlink subsys (disabled)
[ 0.716266] audit: type=2000 audit(1487611020.724:1): initialized
[ 0.716566] Initialise system trusted keyring
[ 0.716737] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.716738] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.717844] zbud: loaded
[ 0.718015] VFS: Disk quotas dquot_6.6.0
[ 0.718038] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.718224] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.718423] fuse init (API version 7.23)
[ 0.718527] Key type big_key registered
[ 0.718543] Allocating IMA MOK and blacklist keyrings.
[ 0.719398] Key type asymmetric registered
[ 0.719401] Asymmetric key parser 'x509' registered
[ 0.719427] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.719490] io scheduler noop registered
[ 0.719493] io scheduler deadline registered (default)
[ 0.719515] io scheduler cfq registered
[ 0.719878] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.719882] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.719906] intel_idle: MWAIT substates: 0x142120
[ 0.719907] intel_idle: v0.4.1 model 0x5E
[ 0.719908] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.720114] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.720117] ACPI: Sleep Button [SLPB]
[ 0.720141] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.720143] ACPI: Power Button [PWRB]
[ 0.720167] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.720168] ACPI: Power Button [PWRF]
[ 0.797073] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.797075] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.797188] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.797190] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.797223] GHES: HEST is not enabled!
[ 0.797485] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.818046] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.825244] Linux agpgart interface v0.103
[ 0.829215] brd: module loaded
[ 0.830742] loop: module loaded
[ 0.830885] libphy: Fixed MDIO Bus: probed
[ 0.830889] tun: Universal TUN/TAP device driver, 1.6
[ 0.830889] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.830943] PPP generic driver version 2.4.2
[ 0.831015] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.831019] ehci-pci: EHCI PCI platform driver
[ 0.831026] ehci-platform: EHCI generic platform driver
[ 0.831034] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.831037] ohci-pci: OHCI PCI platform driver
[ 0.831045] ohci-platform: OHCI generic platform driver
[ 0.831052] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.831156] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.831160] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.832239] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.832243] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.832307] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.832309] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.832310] usb usb1: Product: xHCI Host Controller
[ 0.832311] usb usb1: Manufacturer: Linux 4.4.0-62-generic xhci-hcd
[ 0.832312] usb usb1: SerialNumber: 0000:00:14.0
[ 0.832408] hub 1-0:1.0: USB hub found
[ 0.832420] hub 1-0:1.0: 12 ports detected
[ 0.839317] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.839319] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.839339] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.839340] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.839341] usb usb2: Product: xHCI Host Controller
[ 0.839342] usb usb2: Manufacturer: Linux 4.4.0-62-generic xhci-hcd
[ 0.839343] usb usb2: SerialNumber: 0000:00:14.0
[ 0.839458] hub 2-0:1.0: USB hub found
[ 0.839466] hub 2-0:1.0: 6 ports detected
[ 0.843057] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.846408] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.846411] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.846592] mousedev: PS/2 mouse device common for all mice
[ 0.846910] rtc_cmos 00:05: RTC can wake from S4
[ 0.847318] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.847399] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.847404] i2c /dev entries driver
[ 0.847438] device-mapper: uevent: version 1.0.3
[ 0.847528] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.847539] Intel P-state driver initializing.
[ 0.847541] intel_pstate: HWP enabled
[ 0.848704] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.849790] NET: Registered protocol family 10
[ 0.850093] NET: Registered protocol family 17
[ 0.850101] Key type dns_resolver registered
[ 0.850430] microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x84
[ 0.850472] microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x84
[ 0.850476] microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x84
[ 0.850543] microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x84
[ 0.850600] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.851006] registered taskstats version 1
[ 0.851020] Loading compiled-in X.509 certificates
[ 0.851500] Loaded X.509 cert 'Build time autogenerated kernel key: a630254739635d6fdc487c9f0afa5d9a0ff04f04'
[ 0.851511] zswap: loaded using pool lzo/zbud
[ 0.853362] Key type trusted registered
[ 0.857863] Key type encrypted registered
[ 0.857867] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.857870] ima: No TPM chip found, activating TPM-bypass!
[ 0.857882] evm: HMAC attrs: 0x1
[ 0.858763] Magic number: 5:2:290
[ 0.858780] tty tty23: hash matches
[ 0.859064] rtc_cmos 00:05: setting system clock to 2017-02-20 17:17:01 UTC (1487611021)
[ 0.859414] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.859415] EDD information not available.
[ 0.859522] PM: Hibernation image not present or could not be loaded.
[ 0.860471] Freeing unused kernel memory: 1488K (ffffffff81f44000 - ffffffff820b8000)
[ 0.860472] Write protecting the kernel read-only data: 14336k
[ 0.861297] Freeing unused kernel memory: 1792K (ffff880001840000 - ffff880001a00000)
[ 0.861697] Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
[ 0.872418] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 0.872460] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 0.872468] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 0.872806] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 0.872834] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 0.873083] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 0.873138] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 0.873166] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 0.873193] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 0.873222] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 0.889875] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.894157] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.897942] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.898103] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 0.898856] wmi: Mapper loaded
[ 0.922839] ahci 0000:00:17.0: version 3.0
[ 0.923961] [drm] Initialized drm 1.1.0 20060810
[ 0.925061] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.925067] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.934034] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0xffffc90000e90000, 70:8b:cd:a4:a3:63, XID 14100800 IRQ 123
[ 0.934036] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.937068] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.937071] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 0.964683] MXM: GUID detected in BIOS
[ 0.964961] nouveau 0000:01:00.0: NVIDIA NV41 (441300a2)
[ 0.968998] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 0.986333] scsi host0: ahci
[ 0.986792] scsi host1: ahci
[ 0.987214] scsi host2: ahci
[ 0.987639] scsi host3: ahci
[ 0.988211] scsi host4: ahci
[ 0.988579] scsi host5: ahci
[ 0.988617] ata1: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b100 irq 122
[ 0.988632] ata2: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b180 irq 122
[ 0.988646] ata3: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b200 irq 122
[ 0.988657] ata4: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b280 irq 122
[ 0.988701] ata5: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b300 irq 122
[ 0.988714] ata6: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b380 irq 122
[ 0.990039] [drm:i915_gem_init_stolen [i915_bpo]] *ERROR* conflict detected with stolen region: [0xb4000000 - 0xb8000000]
[ 0.990630] [drm] Memory usable by graphics device = 4096M
[ 0.990631] [drm] Replacing VGA console driver
[ 0.996060] nouveau 0000:01:00.0: bios: version 05.41.02.47.00
[ 0.997989] Console: switching to colour dummy device 80x25
[ 1.004309] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.004310] [drm] Driver supports precise vblank timestamp query.
[ 1.015209] [drm] Finished loading i915/skl_dmc_ver1.bin (v1.26)
[ 1.028702] [drm] Initialized i915_bpo 1.6.0 20160425 for 0000:00:02.0 on minor 0
[ 1.030525] nouveau 0000:01:00.0: fb: 256 MiB DDR1
[ 1.108545] [TTM] Zone kernel: Available graphics memory: 4010266 kiB
[ 1.108546] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.108547] [TTM] Initializing pool allocator
[ 1.108550] [TTM] Initializing DMA pool allocator
[ 1.108557] nouveau 0000:01:00.0: DRM: VRAM: 252 MiB
[ 1.108558] nouveau 0000:01:00.0: DRM: GART: 512 MiB
[ 1.108560] nouveau 0000:01:00.0: DRM: TMDS table version 1.1
[ 1.108561] nouveau 0000:01:00.0: DRM: DCB version 3.0
[ 1.108562] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028
[ 1.108563] nouveau 0000:01:00.0: DRM: DCB outp 01: 04011312 00000000
[ 1.108564] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028
[ 1.108565] nouveau 0000:01:00.0: DRM: DCB outp 03: 020223f1 0040c080
[ 1.108566] nouveau 0000:01:00.0: DRM: DCB conn 00: 0000
[ 1.108567] nouveau 0000:01:00.0: DRM: DCB conn 01: 2130
[ 1.108568] nouveau 0000:01:00.0: DRM: DCB conn 02: 0210
[ 1.108569] nouveau 0000:01:00.0: DRM: DCB conn 03: 0211
[ 1.108569] nouveau 0000:01:00.0: DRM: DCB conn 04: 0213
[ 1.108640] nouveau 0000:01:00.0: DRM: Saving VGA fonts
[ 1.153050] usb 1-5: new low-speed USB device number 2 using xhci_hcd
[ 1.168800] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.168801] [drm] Driver supports precise vblank timestamp query.
[ 1.168803] nouveau 0000:01:00.0: DRM: 0xD654: Parsing digital output script table
[ 1.226187] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[ 1.226191] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 3)
[ 1.285960] usb 1-5: New USB device found, idVendor=045e, idProduct=0039
[ 1.285962] usb 1-5: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 1.285963] usb 1-5: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 1.285964] usb 1-5: Manufacturer: Microsoft
[ 1.286211] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.290731] usbcore: registered new interface driver usbhid
[ 1.290732] usbhid: USB HID core driver
[ 1.292383] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:045E:0039.0001/input/input7
[ 1.293086] hid-generic 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-5/input0
[ 1.303846] i915_bpo 0000:00:02.0: No connectors reported connected with modes
[ 1.303848] [drm] Cannot find any crtc or sizes - going 1024x768
[ 1.309098] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.309117] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.309162] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.309890] ata2.00: ATA-10: WDC WD10EZEX-00WN4A0, 01.01A01, max UDMA/133
[ 1.309891] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.310776] ata2.00: configured for UDMA/133
[ 1.310975] ata6.00: ATAPI: ASUS BC-12D2HT, 1.00, max UDMA/100
[ 1.313185] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.313716] ata6.00: configured for UDMA/100
[ 1.317098] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.317116] ata3: SATA link down (SStatus 4 SControl 300)
[ 1.317928] ata1.00: ATA-10: WDC WD10EZEX-08WN4A0, 01.01A01, max UDMA/100
[ 1.317929] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.318840] ata1.00: configured for UDMA/100
[ 1.319442] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[ 1.319934] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.319953] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.319954] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.320225] scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-00W 1A01 PQ: 0 ANSI: 5
[ 1.320475] sd 0:0:0:0: [sda] Write Protect is off
[ 1.320476] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.320554] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.320560] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.320612] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.320613] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.320963] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.320964] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.321019] nouveau 0000:01:00.0: DRM: Load detected on output B
[ 1.321058] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.321314] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x9000, bo ffff880236f1ac00
[ 1.323113] scsi 5:0:0:0: CD-ROM ASUS BC-12D2HT 1.00 PQ: 0 ANSI: 5
[ 1.340722] sr 5:0:0:0: [sr0] scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.340722] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.340989] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.341034] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 1.361118] sdb: sdb1 sdb2 < sdb5 >
[ 1.361885] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.377751] sda: sda1 sda2 < sda5 >
[ 1.379385] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.452949] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[ 1.563618] Console: switching to colour frame buffer device 128x48
[ 1.564681] i915_bpo 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.564981] fbcon: nouveaufb (fb1) is primary device
[ 1.564981] fbcon: Remapping primary device, fb1, to tty 1-63
[ 1.582212] usb 1-6: New USB device found, idVendor=05e3, idProduct=0606
[ 1.582213] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.582214] usb 1-6: Product: USB2.0 Hub
[ 1.582913] hub 1-6:1.0: USB hub found
[ 1.583209] hub 1-6:1.0: 4 ports detected
[ 1.605159] nouveau 0000:01:00.0: DRM: Setting dpms mode 0 on TV encoder (output 3)
[ 1.605164] nouveau 0000:01:00.0: DRM: Output TV-1 is running on CRTC 1 using output B
[ 1.697026] usb 1-8: new high-speed USB device number 4 using xhci_hcd
[ 1.701040] nouveau 0000:01:00.0: DRM: Load detected on output B
[ 1.712990] tsc: Refined TSC clocksource calibration: 2712.003 MHz
[ 1.712991] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717892b384, max_idle_ns: 440795205011 ns
[ 1.718797] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[ 1.718799] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 1.829219] usb 1-8: New USB device found, idVendor=1a40, idProduct=0201
[ 1.829221] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.829223] usb 1-8: Product: USB 2.0 Hub [MTT]
[ 1.829747] hub 1-8:1.0: USB hub found
[ 1.829792] hub 1-8:1.0: 7 ports detected
[ 2.100939] usb 1-8.1: new low-speed USB device number 5 using xhci_hcd
[ 2.196173] usb 1-8.1: New USB device found, idVendor=046d, idProduct=c316
[ 2.196175] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.196176] usb 1-8.1: Product: Logitech USB Keyboard
[ 2.196177] usb 1-8.1: Manufacturer: Logitech
[ 2.196433] usb 1-8.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.200263] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:046D:C316.0002/input/input8
[ 2.253399] hid-generic 0003:046D:C316.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:14.0-8.1/input0
[ 2.259830] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.1/1-8.1:1.1/0003:046D:C316.0003/input/input9
[ 2.313378] hid-generic 0003:046D:C316.0003: input,hidraw2: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:14.0-8.1/input1
[ 2.388865] usb 1-8.5: new high-speed USB device number 6 using xhci_hcd
[ 2.477220] usb 1-8.5: New USB device found, idVendor=1a40, idProduct=0201
[ 2.477222] usb 1-8.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.477223] usb 1-8.5: Product: USB 2.0 Hub [MTT]
[ 2.477825] hub 1-8.5:1.0: USB hub found
[ 2.477930] hub 1-8.5:1.0: 7 ports detected
[ 2.488474] random: nonblocking pool is initialized
[ 2.713422] clocksource: Switched to clocksource tsc
[ 2.793129] [drm] RC6 on
[ 8.023188] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.917935] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 8.918018] systemd[1]: Detected architecture x86-64.
[ 8.926912] systemd[1]: Set hostname to <ano>.
[ 9.809298] systemd[1]: Listening on udev Kernel Socket.
[ 9.809331] systemd[1]: Reached target Encrypted Volumes.
[ 9.809354] systemd[1]: Listening on Journal Socket.
[ 9.809376] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.809427] systemd[1]: Created slice System Slice.
[ 9.820787] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 9.821083] systemd[1]: Started Braille Device Support.
[ 9.821623] systemd[1]: Starting Set console keymap...
[ 9.821869] systemd[1]: Started Read required files in advance.
[ 9.821919] systemd[1]: Reached target User and Group Name Lookups.
[ 9.822225] systemd[1]: Mounting Huge Pages File System...
[ 9.822488] systemd[1]: Mounting Debug File System...
[ 9.822562] systemd[1]: Listening on Journal Audit Socket.
[ 9.822582] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.836440] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 9.856837] systemd[1]: Starting Load Kernel Modules...
[ 9.856871] systemd[1]: Listening on Syslog Socket.
[ 9.857153] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.857163] systemd[1]: Reached target Remote File Systems (Pre).
[ 9.857173] systemd[1]: Reached target Remote File Systems.
[ 9.857311] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.948824] systemd[1]: Starting Uncomplicated firewall...
[ 9.948887] systemd[1]: Created slice User and Session Slice.
[ 9.948897] systemd[1]: Reached target Slices.
[ 9.948943] systemd[1]: Listening on udev Control Socket.
[ 9.949017] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 9.949313] systemd[1]: Starting Journal Service...
[ 10.148741] systemd[1]: Started Uncomplicated firewall.
[ 10.166382] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 10.176844] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 10.235314] systemd[1]: Mounted POSIX Message Queue File System.
[ 10.235333] systemd[1]: Mounted Debug File System.
[ 10.235341] systemd[1]: Mounted Huge Pages File System.
[ 10.280808] lp: driver loaded but no devices found
[ 10.405872] systemd[1]: Started Journal Service.
[ 10.583092] ppdev: user-space parallel port driver
[ 10.759793] parport_pc 00:01: reported by Plug and Play ACPI
[ 10.759861] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 10.856940] lp0: using parport0 (interrupt-driven).
[ 12.127561] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.272651] systemd-journald[265]: Received request to flush runtime journal from PID 1
[ 12.726436] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.824891] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 13.001387] Bluetooth: Core ver 2.21
[ 13.001396] NET: Registered protocol family 31
[ 13.001397] Bluetooth: HCI device and connection manager initialized
[ 13.001398] Bluetooth: HCI socket layer initialized
[ 13.001400] Bluetooth: L2CAP socket layer initialized
[ 13.001403] Bluetooth: SCO socket layer initialized
[ 13.285065] Bluetooth: HCI UART driver ver 2.3
[ 13.285081] Bluetooth: HCI UART protocol H4 registered
[ 13.285081] Bluetooth: HCI UART protocol BCSP registered
[ 13.285082] Bluetooth: HCI UART protocol LL registered
[ 13.285083] Bluetooth: HCI UART protocol ATH3K registered
[ 13.285083] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 13.285100] Bluetooth: HCI UART protocol Intel registered
[ 13.285108] Bluetooth: HCI UART protocol BCM registered
[ 13.285108] Bluetooth: HCI UART protocol QCA registered
[ 13.313505] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915_bpo])
[ 13.316351] AVX2 version of gcm_enc/dec engaged.
[ 13.316352] AES CTR mode by8 optimization enabled
[ 13.484559] nouveau 0000:01:00.0: DRM: Load detected on output B
[ 13.537900] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 13.537902] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.537904] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 13.537905] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 13.537906] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 13.537907] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 13.537908] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 13.537909] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 13.537910] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 13.605145] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 13.605183] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 13.605215] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 13.605247] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 13.605280] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 13.605312] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 13.605343] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 13.605375] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 13.851465] kvm: disabled by bios
[ 13.877181] kvm: disabled by bios
[ 13.909146] kvm: disabled by bios
[ 13.941382] kvm: disabled by bios
[ 14.111421] intel_rapl: Found RAPL domain package
[ 14.111424] intel_rapl: Found RAPL domain core
[ 14.111426] intel_rapl: Found RAPL domain uncore
[ 14.111427] intel_rapl: Found RAPL domain dram
[ 16.124406] asus_wmi: ASUS WMI generic driver loaded
[ 16.126028] asus_wmi: Initialization: 0x0
[ 16.126041] asus_wmi: BIOS WMI version: 0.9
[ 16.126086] asus_wmi: SFUN value: 0x0
[ 16.126258] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input18
[ 16.126332] asus_wmi: Number of fans: 1
[ 16.369560] EXT4-fs (sdb1): recovery complete
[ 16.369564] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 16.712821] Adding 8232956k swap on /dev/sda5. Priority:-1 extents:1 across:8232956k FS
[ 16.732035] audit: type=1400 audit(1487611037.366:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=811 comm="apparmor_parser"
[ 16.732040] audit: type=1400 audit(1487611037.366:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=811 comm="apparmor_parser"
[ 16.732043] audit: type=1400 audit(1487611037.366:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=811 comm="apparmor_parser"
[ 16.732046] audit: type=1400 audit(1487611037.366:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=811 comm="apparmor_parser"
[ 16.732319] audit: type=1400 audit(1487611037.366:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=810 comm="apparmor_parser"
[ 16.732323] audit: type=1400 audit(1487611037.366:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=810 comm="apparmor_parser"
[ 16.732750] audit: type=1400 audit(1487611037.370:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=814 comm="apparmor_parser"
[ 16.733581] audit: type=1400 audit(1487611037.370:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=816 comm="apparmor_parser"
[ 16.733600] audit: type=1400 audit(1487611037.370:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=816 comm="apparmor_parser"
[ 16.735259] audit: type=1400 audit(1487611037.370:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=818 comm="apparmor_parser"
[ 19.542530] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 20.319240] r8169 0000:02:00.0 enp2s0: link down
[ 20.319269] r8169 0000:02:00.0 enp2s0: link down
[ 20.319325] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 20.856475] nouveau 0000:01:00.0: DRM: Load detected on output B
[ 20.940470] nouveau 0000:01:00.0: DRM: Load detected on output B
[ 21.949468] r8169 0000:02:00.0 enp2s0: link up
[ 21.949475] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 32.328150] nouveau 0000:01:00.0: DRM: Load detected on output B
[ 32.412204] nouveau 0000:01:00.0: DRM: Load detected on output B
[ 35.063156] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 35.063157] Bluetooth: BNEP filters: protocol multicast
[ 35.063160] Bluetooth: BNEP socket layer initialized
[ 35.664063] nouveau 0000:01:00.0: DRM: Load detected on output B
[ 35.756101] nouveau 0000:01:00.0: DRM: Load detected on output B
[ 37.744029] nouveau 0000:01:00.0: DRM: Load detected on output B
[ 38.204056] nouveau 0000:01:00.0: DRM: Load detected on output B
ano@ano:~$ Dernière modification par emena (Le 20/02/2017, à 19:37)
Ubuntu 22.04.4 LTS
Hors ligne
#50 Le 23/02/2017, à 19:42
- emena
Re : [résolu]ubuntu 16 se plante toutes les heures - problèmes de disque ?
Hello,
Les erreurs que j'ai au démarrage semble être connues, d'autres les ont eu, je vais chercher.
En ce qui concerne ce qui fige mon pc, j'ai pu le reproduire avec Firefox et Thunderbird ouvert ensemble. L'erreur est dans firefox.
Voici les erreurs recueilli avec la commande
firefox 2>log.logBonne soirée
Anne-Marie
ATTENTION: default value of option force_s3tc_enable overridden by environment.
[Parent 2621] WARNING: pipe error (58): Connexion ré-initialisée par le correspondant: file /build/firefox-z5GTBX/firefox-51.0.1+build2/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 323
ATTENTION: default value of option force_s3tc_enable overridden by environment.
(firefox:2198): Gtk-CRITICAL **: gtk_clipboard_set_with_data: assertion 'targets != NULL' failed
(firefox:2198): Gtk-CRITICAL **: gtk_clipboard_set_with_data: assertion 'targets != NULL' failedUbuntu 22.04.4 LTS
Hors ligne