Contenu | Rechercher | Menus

Annonce

Ubuntu 16.04 LTS
Commandez vos DVD et clés USB Ubuntu-fr !

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

#26 Le 04/03/2017, à 14:49

devy1

Re : Installation SSD pour Ubuntu

et enfin :

 benoit@benoit:~$ sudo apt-get dist-upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  linux-image-4.2.0-35-generic linux-image-extra-4.2.0-35-generic
  linux-signed-image-4.2.0-35-generic
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.

Hors ligne

#27 Le 04/03/2017, à 14:51

devy1

Re : Installation SSD pour Ubuntu

Et toujours ....

benoit@benoit:~$ sudo apt-get install --install-recommends xserver-xorg-hwe-16.04
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet xserver-xorg-hwe-16.04
E: Couldn't find any package by glob 'xserver-xorg-hwe-16.04'
E: Impossible de trouver de paquet correspondant à l'expression rationnelle « xserver-xorg-hwe-16.04 »
benoit@benoit:~$ 
 

Hors ligne

#28 Le 04/03/2017, à 14:53

devy1

Re : Installation SSD pour Ubuntu

J'ai l'impression qu'il y a un probleme avec le lunchpad ... mais je ne sais pas ce que c'est ...

Hors ligne

#29 Le 04/03/2017, à 15:03

cqfd93

Re : Installation SSD pour Ubuntu

Modération : merci de respecter les règles du forum et d'arrêter de flooder : 10 messages entre 8h57 et 14h53, c'est beaucoup !!!
Même problème avec un autre de tes sujets :-(

En ligne

#30 Le 04/03/2017, à 22:49

devy1

Re : Installation SSD pour Ubuntu

En meme temps ça sert à quoi un forum si on peut pas parler ...
N'importe quoi ...

Hors ligne

#31 Le 06/03/2017, à 11:44

Ayral

Re : Installation SSD pour Ubuntu

devy1 a écrit :

En même temps ça sert à quoi un forum si on peut pas parler ...
N'importe quoi ...

C'est à dire qu'il serait opportun que tu tournes plusieurs fois ta souris sur le tapis avant de cliquer. Tu vas très vite, tu ne donnes pas les retours complets, tu essaies toutes sortes de choses, et tu ne lis pas vraiment les retours de tes commandes.
C'est comme ça quand j'ai commencé avec Ubuntu que j'ai bousillé mon système et dû tout réinstaller. Pour se dépanner il faut prendre les problèmes 1 par 1

Pour le moment et avant de faire pire, tu as un problème facile à régler, et le terminal te dit comment (pour le premier)

Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  linux-image-4.2.0-35-generic linux-image-extra-4.2.0-35-generic
  linux-signed-image-4.2.0-35-generic
Veuillez utiliser « sudo apt autoremove » pour les supprimer.

Ensuite

E: Impossible de trouver le paquet xserver-xorg-hwe-16.04
E: Couldn't find any package by glob 'xserver-xorg-hwe-16.04'
E: Impossible de trouver de paquet correspondant à l'expression rationnelle « xserver-xorg-hwe-16.04 »
benoit@benoit:~$ 

Soit le paquet n'existe pas dans les dépôts de tes sources, ou tu utilises le mauvais dépôt.

Enfin, si j'ai bien compris, le problème que tu as eu au post 25 n'a toujours pas été réglé jusqu'à plus ample informé.

 E: Failed to fetch http://ppa.launchpad.net/alex-wv/pulseaudio-equalizer-ppa/ubuntu/dists/xenial/main/binary-amd64/Packages  404  Not Found
E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place. 

Règle ça c'est une priorité.

Dernière modification par Ayral (Le 06/03/2017, à 11:50)


Pour mettre les retours de commande entre deux balises code, les explications sont là : https://forum.ubuntu-fr.org/viewtopic.php?id=1614731
Blog d'un retraité
Site de graphisme du fiston Loïc
Ubuntu 14.04 LTS sur un desktop et 14.04 sur un Dell Latitude 820

Hors ligne

#32 Le 06/03/2017, à 16:52

devy1

Re : Installation SSD pour Ubuntu

Merci Ayral.

Effectivement j'essaie plein de truc, j'ai eu pas mal de beugue a l’installation, peut être du au fait que HP ne soit pas très compatible ! Alors j'ai essayé pas mal de truc qui ont plus ou moins fonctionné, et je me demand toujours comment ma machine fonctionne avec ce que je lui fait faire ... lol
J'ai donc fait un sudo apt autoremove a la fin il a marqué Fait.
Pour ce qui est de mon post 25, je sais pas quoi faire .

Hors ligne

#33 Le 06/03/2017, à 18:19

Ayral

Re : Installation SSD pour Ubuntu

Bien déjà tu as un peu nettoyé les paquets inutiles avec autoremove. Tu pourras installer Kclean pour faire une nettoyage plus propre.

En attendant de faire de nouvelles bêtises, tu vas s'il te plaît nous donner les retours des commandes suivantes à passer dans un terminal..

Pour vérifier tes sources (dépôts et ppa)

find /etc/apt -name '*.list' -exec bash -c 'echo -e "\n$1\n"; nl -ba "$1"' _ '{}' \;

C'est la commande que cqfd93 wink propose, je me la suis copiée dans un coin de mon bureau.

Pour vérifier la mise à jour de tes sources et mettre à jour les paquets

sudo apt update && sudo apt dist-upgrade -y

le -y à la fin permet de ne pas intervenir entre les deux commandes en tapant o ou y. Les && entre les deux commandes permet de les concaténer (enchaîner).

Voilà, tu nous mets tout ça dans un message avec les balises code qui vont bien. Merci.

Dernière modification par Ayral (Le 06/03/2017, à 18:21)


Pour mettre les retours de commande entre deux balises code, les explications sont là : https://forum.ubuntu-fr.org/viewtopic.php?id=1614731
Blog d'un retraité
Site de graphisme du fiston Loïc
Ubuntu 14.04 LTS sur un desktop et 14.04 sur un Dell Latitude 820

Hors ligne

#34 Le 06/03/2017, à 19:32

devy1

Re : Installation SSD pour Ubuntu

Merci voila smile

 benoit@benoit:~$ find /etc/apt -name '*.list' -exec bash -c 'echo -e "\n$1\n"; nl -ba "$1"' _ '{}' \;

/etc/apt/sources.list.d/dropbox.list

     1	deb [arch=i386,amd64] http://linux.dropbox.com/ubuntu wily main

/etc/apt/sources.list.d/google-chrome.list

     1	### THIS FILE IS AUTOMATICALLY CONFIGURED ###
     2	# You may comment out this entry, but any other modifications may be lost.
     3	# deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main # désactivé pour la mise à niveau vers xenial

/etc/apt/sources.list.d/upubuntu-com-ubuntu-devel-wily.list

     1	# deb http://ppa.launchpad.net/upubuntu-com/devel/ubuntu xenial main # désactivé pour la mise à niveau vers xenial
     2	# deb-src http://ppa.launchpad.net/upubuntu-com/devel/ubuntu wily main

/etc/apt/sources.list.d/alex-wv-ubuntu-pulseaudio-equalizer-ppa-xenial.list

     1	deb http://ppa.launchpad.net/alex-wv/pulseaudio-equalizer-ppa/ubuntu xenial main
     2	# deb-src http://ppa.launchpad.net/alex-wv/pulseaudio-equalizer-ppa/ubuntu xenial main

/etc/apt/sources.list

     1	# deb cdrom:[Ubuntu 15.10 _Wily Werewolf_ - Release amd64 (20151021)]/ wily main restricted
     2	
     3	# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
     4	# newer versions of the distribution.
     5	deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
     6	deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
     7	
     8	## Major bug fix updates produced after the final release of the
     9	## distribution.
    10	
    11	## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
    12	## team. Also, please note that software in universe WILL NOT receive any
    13	## review or updates from the Ubuntu security team.
    14	deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
    15	deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial universe
    16	
    17	## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu 
    18	## team, and may not be under a free licence. Please satisfy yourself as to 
    19	## your rights to use the software. Also, please note that software in 
    20	## multiverse WILL NOT receive any review or updates from the Ubuntu
    21	## security team.
    22	deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
    23	deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
    24	
    25	## N.B. software from this repository may not have been tested as
    26	## extensively as that contained in the main release, although it includes
    27	## newer versions of some applications which may provide useful features.
    28	## Also, please note that software in backports WILL NOT receive any review
    29	## or updates from the Ubuntu security team.
    30	
    31	
    32	## Uncomment the following two lines to add software from Canonical's
    33	## 'partner' repository.
    34	## This software is not part of Ubuntu, but is offered by Canonical and the
    35	## respective vendors as a service to Ubuntu users.
    36	# deb http://archive.canonical.com/ubuntu wily partner
    37	# deb-src http://archive.canonical.com/ubuntu wily partner
 

et

benoit@benoit:~$ sudo apt update && sudo apt dist-upgrade -y
[sudo] Mot de passe de benoit : 
Atteint:1 http://fr.archive.ubuntu.com/ubuntu xenial InRelease
Ign:2 http://ppa.launchpad.net/alex-wv/pulseaudio-equalizer-ppa/ubuntu xenial InRelease
Err:3 http://ppa.launchpad.net/alex-wv/pulseaudio-equalizer-ppa/ubuntu xenial Release
  404  Not Found
Ign:4 http://linux.dropbox.com/ubuntu wily InRelease                        
Réception de:5 http://linux.dropbox.com/ubuntu wily Release [6 596 B]
Lecture des listes de paquets... Fait
E: The repository 'http://ppa.launchpad.net/alex-wv/pulseaudio-equalizer-ppa/ubuntu xenial Release' does not have a Release file.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
benoit@benoit:~$ 
  

ça, j'ai pas l'impression que se soit très normal ...

Hors ligne

#35 Le 06/03/2017, à 23:13

Ayral

Re : Installation SSD pour Ubuntu

Il me semble qu'il y a un mix étonnant entre les dépôts officiels et les ppa, et entre wily et xenial (15.10 et 16.04).
Il vaut mieux attendre des spécialistes des ppa et des sources avant de faire une sottise.

Déjà le ppa https://launchpad.net/~alex-wv/+archive … alizer-ppa n'est plus mis à jour depuis 3 ans la dernière version est pour la version Trusty, la 14.04. Il faut le désactiver, et retenter la commande

sudo apt update && sudo apt dist-upgrade -y

Edit : et là c'est tard pour moi, on verra demain !

Dernière modification par Ayral (Le 06/03/2017, à 23:30)


Pour mettre les retours de commande entre deux balises code, les explications sont là : https://forum.ubuntu-fr.org/viewtopic.php?id=1614731
Blog d'un retraité
Site de graphisme du fiston Loïc
Ubuntu 14.04 LTS sur un desktop et 14.04 sur un Dell Latitude 820

Hors ligne

#36 Le 07/03/2017, à 08:16

cqfd93

Re : Installation SSD pour Ubuntu

Bonjour,

Je vois plein de problèmes dans ces sources : un mélange wily / xenial, un ppa qui n'a pas de version xenial (qu'Ayral a mentionné) et un sources.list bordélique et surtout très incomplet. Je propose donc :

pour les ppa

cd /etc/apt/sources.list.d/
sudo sed -i 's/wily/xenial/' dropbox.list
sudo rm -v google-chrome* upubuntu-com* alex-wv-ubuntu*

pour sources.list, une remise à neuf complète
Pour ce qui suit, si tu obtiens un message d'erreur, arrête tout et dis-le ici.

  • Renomme sources.list en sources.bak :

    cd /etc/apt/
    sudo mv -v sources.list sources.bak
  • Ouvre un nouveau sources.list avec nano :

    sudo nano /etc/apt/sources.list
  • Colle ce qui suit avec un clic droit / coller :

    # deb cdrom:[Ubuntu 16.04.1 LTS _Xenial Xerus_ - Release amd64 (20160719)]/ xenial main restricted
    
    deb http://archive.ubuntu.com/ubuntu xenial main restricted universe multiverse
    deb http://archive.ubuntu.com/ubuntu xenial-updates main restricted universe multiverse
    deb http://archive.ubuntu.com/ubuntu xenial-backports main restricted universe multiverse
    deb http://archive.ubuntu.com/ubuntu xenial-security main restricted universe multiverse
    # deb-src http://archive.ubuntu.com/ubuntu xenial main restricted universe multiverse
    # deb-src http://archive.ubuntu.com/ubuntu xenial-updates main restricted universe multiverse
    # deb-src http://archive.ubuntu.com/ubuntu xenial-backports main restricted universe multiverse
    # deb-src http://archive.ubuntu.com/ubuntu xenial-security main restricted universe multiverse
    
    deb http://archive.canonical.com/ubuntu xenial partner
    # deb-src http://archive.canonical.com/ubuntu xenial partner
  • Enregistre avec ctrl-O suivi de Entrée et ferme avec ctrl-X.

  • Tu n'as plus qu'à faire les mises à jour :

    sudo apt update
    sudo apt full-upgrade

Donner les retours complets de toutes ces commandes !

Astuce pour copier / coller sans erreur :

  • triple clic gauche pour sélectionner et copier une ligne entière

  • clic molette pour coller dans le terminal

En ligne

#37 Le 07/03/2017, à 20:32

devy1

Re : Installation SSD pour Ubuntu

Donc j'ai fait tout ce que tu m'as demandé, j'avais préparé un retour dans un post, mais le temps que le full-upgrade se fasse, j'était déconnecté, donc j'ai tout perdu ce que j'avais noté ...
Mais bon tout c'est bien passé ...

Et maintenant, je fais quoi, je redémarre mon ordi ?

Hors ligne

#38 Le 07/03/2017, à 20:38

devy1

Re : Installation SSD pour Ubuntu

dans mon lanceur j'ai ça qui est apparu : Informations disponibles
Mettre à jour les information

Les données de certains paquets n'ont pas pu être téléchargées

Les paquet suivants nécessitent le téléchargement de données supplémentaires après leur installation, mais les données n'ont pas pu être téléchargées ou traitées.

ttf-mscorefonts-installer

Il s'agit d'un échec permanent rendant ces paquets inutilisables sur votre système. Vous devez probablement réparer votre connexion à Internet avant de corriger ce problème en supprimant et réinstallant les paquets.

Hors ligne

#39 Le 07/03/2017, à 23:18

Ayral

Re : Installation SSD pour Ubuntu

Essaie de prendre l'habitude de répondre dans un seul message, éventuellement en modifiant le premier, ça évitera le multi-postage.
Ensuite, au lieu de raconter ce que tu as lu dans les réponses du terminal, copie-colle intégralement les retours de commande entre balises code, comme indiqué plus haut au message 33 concernant les balises code. Lassant de le dire.


Pour mettre les retours de commande entre deux balises code, les explications sont là : https://forum.ubuntu-fr.org/viewtopic.php?id=1614731
Blog d'un retraité
Site de graphisme du fiston Loïc
Ubuntu 14.04 LTS sur un desktop et 14.04 sur un Dell Latitude 820

Hors ligne

#40 Le 07/03/2017, à 23:24

cqfd93

Re : Installation SSD pour Ubuntu

Bonsoir,

J'attends les retours complets de :

sudo apt update
sudo apt full-upgrade

En ligne

#41 Le 08/03/2017, à 08:11

devy1

Re : Installation SSD pour Ubuntu

Pour Ayral, si tu avais bien lu mon post 37 tu aurais compris, quand j'ai fais mon retour, je n'avais rien de plus a dire, c'est plus tard que je me suis aperçu de la fenêtre "information disponibles" donc deux post. Je ne savais pas qu'on pouvait modifier un post, je ferai cela dorénavant. Merci

Pour cqfd93 :

 benoit@benoit:~$ sudo apt update
[sudo] Mot de passe de benoit : 
Désolé, essayez de nouveau.
[sudo] Mot de passe de benoit : 
Atteint:1 http://archive.canonical.com/ubuntu xenial InRelease
Atteint:2 http://archive.ubuntu.com/ubuntu xenial InRelease                    
Atteint:3 http://archive.ubuntu.com/ubuntu xenial-updates InRelease            
Atteint:4 http://archive.ubuntu.com/ubuntu xenial-backports InRelease          
Atteint:5 http://archive.ubuntu.com/ubuntu xenial-security InRelease           
Ign:6 http://linux.dropbox.com/ubuntu xenial InRelease                         
Atteint:7 http://linux.dropbox.com/ubuntu xenial Release      
Lecture des listes de paquets... Fait                         
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
15 packages can be upgraded. Run 'apt list --upgradable' to see them.
benoit@benoit:~$ 

 
 benoit@benoit:~$ sudo apt full-upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  linux-headers-4.4.0-21 linux-headers-4.4.0-21-generic
  linux-image-4.4.0-21-generic linux-image-extra-4.4.0-21-generic
  linux-signed-image-4.4.0-21-generic ubuntu-core-launcher
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Les NOUVEAUX paquets suivants seront installés :
  linux-headers-4.4.0-66 linux-headers-4.4.0-66-generic
  linux-image-4.4.0-66-generic linux-image-extra-4.4.0-66-generic
  linux-signed-image-4.4.0-66-generic
Les paquets suivants seront mis à jour :
  desktop-file-utils firefox firefox-locale-en firefox-locale-fr
  libnm-glib-vpn1 libnm-glib4 libnm-util2 libnm0 linux-generic
  linux-headers-generic linux-image-generic linux-libc-dev
  linux-signed-generic linux-signed-image-generic network-manager
15 mis à jour, 5 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 120 Mo dans les archives.
Après cette opération, 296 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de:1 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 desktop-file-utils amd64 0.22-1ubuntu5.1 [43,8 kB]
Réception de:2 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 firefox amd64 52.0+build2-0ubuntu0.16.04.1 [46,8 MB]
Réception de:3 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 firefox-locale-en amd64 52.0+build2-0ubuntu0.16.04.1 [651 kB]
Réception de:4 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 firefox-locale-fr amd64 52.0+build2-0ubuntu0.16.04.1 [423 kB]
Réception de:5 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libnm-util2 amd64 1.2.6-0ubuntu0.16.04.1 [126 kB]
Réception de:6 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libnm-glib-vpn1 amd64 1.2.6-0ubuntu0.16.04.1 [14,2 kB]
Réception de:7 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libnm-glib4 amd64 1.2.6-0ubuntu0.16.04.1 [83,9 kB]
Réception de:8 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libnm0 amd64 1.2.6-0ubuntu0.16.04.1 [352 kB]
Réception de:9 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 linux-image-4.4.0-66-generic amd64 4.4.0-66.87 [21,8 MB]
Réception de:10 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 linux-image-extra-4.4.0-66-generic amd64 4.4.0-66.87 [36,0 MB]
Réception de:11 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 linux-generic amd64 4.4.0.66.70 [1 784 B]
Réception de:12 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 linux-image-generic amd64 4.4.0.66.70 [2 464 B]
Réception de:13 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 linux-signed-image-4.4.0-66-generic amd64 4.4.0-66.87 [4 072 B]
Réception de:14 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 linux-signed-generic amd64 4.4.0.66.70 [1 818 B]
Réception de:15 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 linux-signed-image-generic amd64 4.4.0.66.70 [2 502 B]
Réception de:16 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 linux-headers-4.4.0-66 all 4.4.0-66.87 [9 963 kB]
Réception de:17 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 linux-headers-4.4.0-66-generic amd64 4.4.0-66.87 [777 kB]
Réception de:18 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 linux-headers-generic amd64 4.4.0.66.70 [2 438 B]
Réception de:19 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 linux-libc-dev amd64 4.4.0-66.87 [833 kB]
Réception de:20 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 network-manager amd64 1.2.6-0ubuntu0.16.04.1 [1 968 kB]
120 Mo réceptionnés en 1min 30s (1 331 ko/s)                                   
(Lecture de la base de données... 303523 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../desktop-file-utils_0.22-1ubuntu5.1_amd64.deb ...
Dépaquetage de desktop-file-utils (0.22-1ubuntu5.1) sur (0.22-1ubuntu5) ...
Préparation du dépaquetage de .../firefox_52.0+build2-0ubuntu0.16.04.1_amd64.deb ...
Dépaquetage de firefox (52.0+build2-0ubuntu0.16.04.1) sur (51.0.1+build2-0ubuntu0.16.04.2) ...
Préparation du dépaquetage de .../firefox-locale-en_52.0+build2-0ubuntu0.16.04.1_amd64.deb ...
Dépaquetage de firefox-locale-en (52.0+build2-0ubuntu0.16.04.1) sur (51.0.1+build2-0ubuntu0.16.04.2) ...
Préparation du dépaquetage de .../firefox-locale-fr_52.0+build2-0ubuntu0.16.04.1_amd64.deb ...
Dépaquetage de firefox-locale-fr (52.0+build2-0ubuntu0.16.04.1) sur (51.0.1+build2-0ubuntu0.16.04.2) ...
Préparation du dépaquetage de .../libnm-util2_1.2.6-0ubuntu0.16.04.1_amd64.deb ...
Dépaquetage de libnm-util2:amd64 (1.2.6-0ubuntu0.16.04.1) sur (1.2.2-0ubuntu0.16.04.4) ...
Préparation du dépaquetage de .../libnm-glib-vpn1_1.2.6-0ubuntu0.16.04.1_amd64.deb ...
Dépaquetage de libnm-glib-vpn1:amd64 (1.2.6-0ubuntu0.16.04.1) sur (1.2.2-0ubuntu0.16.04.4) ...
Préparation du dépaquetage de .../libnm-glib4_1.2.6-0ubuntu0.16.04.1_amd64.deb ...
Dépaquetage de libnm-glib4:amd64 (1.2.6-0ubuntu0.16.04.1) sur (1.2.2-0ubuntu0.16.04.4) ...
Préparation du dépaquetage de .../libnm0_1.2.6-0ubuntu0.16.04.1_amd64.deb ...
Dépaquetage de libnm0:amd64 (1.2.6-0ubuntu0.16.04.1) sur (1.2.2-0ubuntu0.16.04.4) ...
Sélection du paquet linux-image-4.4.0-66-generic précédemment désélectionné.
Préparation du dépaquetage de .../linux-image-4.4.0-66-generic_4.4.0-66.87_amd64.deb ...
Done.
Dépaquetage de linux-image-4.4.0-66-generic (4.4.0-66.87) ...
Sélection du paquet linux-image-extra-4.4.0-66-generic précédemment désélectionné.
Préparation du dépaquetage de .../linux-image-extra-4.4.0-66-generic_4.4.0-66.87_amd64.deb ...
Dépaquetage de linux-image-extra-4.4.0-66-generic (4.4.0-66.87) ...
Préparation du dépaquetage de .../linux-generic_4.4.0.66.70_amd64.deb ...
Dépaquetage de linux-generic (4.4.0.66.70) sur (4.4.0.64.68) ...
Préparation du dépaquetage de .../linux-image-generic_4.4.0.66.70_amd64.deb ...
Dépaquetage de linux-image-generic (4.4.0.66.70) sur (4.4.0.64.68) ...
Sélection du paquet linux-signed-image-4.4.0-66-generic précédemment désélectionné.
Préparation du dépaquetage de .../linux-signed-image-4.4.0-66-generic_4.4.0-66.87_amd64.deb ...
Dépaquetage de linux-signed-image-4.4.0-66-generic (4.4.0-66.87) ...
Préparation du dépaquetage de .../linux-signed-generic_4.4.0.66.70_amd64.deb ...
Dépaquetage de linux-signed-generic (4.4.0.66.70) sur (4.4.0.64.68) ...
Préparation du dépaquetage de .../linux-signed-image-generic_4.4.0.66.70_amd64.deb ...
Dépaquetage de linux-signed-image-generic (4.4.0.66.70) sur (4.4.0.64.68) ...
Sélection du paquet linux-headers-4.4.0-66 précédemment désélectionné.
Préparation du dépaquetage de .../linux-headers-4.4.0-66_4.4.0-66.87_all.deb ...
Dépaquetage de linux-headers-4.4.0-66 (4.4.0-66.87) ...
Sélection du paquet linux-headers-4.4.0-66-generic précédemment désélectionné.
Préparation du dépaquetage de .../linux-headers-4.4.0-66-generic_4.4.0-66.87_amd64.deb ...
Dépaquetage de linux-headers-4.4.0-66-generic (4.4.0-66.87) ...
Préparation du dépaquetage de .../linux-headers-generic_4.4.0.66.70_amd64.deb ...
Dépaquetage de linux-headers-generic (4.4.0.66.70) sur (4.4.0.64.68) ...
Préparation du dépaquetage de .../linux-libc-dev_4.4.0-66.87_amd64.deb ...
Dépaquetage de linux-libc-dev:amd64 (4.4.0-66.87) sur (4.4.0-64.85) ...
Préparation du dépaquetage de .../network-manager_1.2.6-0ubuntu0.16.04.1_amd64.deb ...
Dépaquetage de network-manager (1.2.6-0ubuntu0.16.04.1) sur (1.2.2-0ubuntu0.16.04.4) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.5-1) ...
Traitement des actions différées (« triggers ») pour bamfdaemon (0.5.3~bzr0+16.04.20160824-0ubuntu1) ...
Rebuilding /usr/share/applications/bamf-2.index...
Traitement des actions différées (« triggers ») pour gnome-menus (3.13.3-6ubuntu3.1) ...
Traitement des actions différées (« triggers ») pour mime-support (3.59ubuntu1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu5) ...
Traitement des actions différées (« triggers ») pour dbus (1.10.6-1ubuntu3.3) ...
Traitement des actions différées (« triggers ») pour ureadahead (0.100.0-19) ...
ureadahead will be reprofiled on next reboot
Traitement des actions différées (« triggers ») pour systemd (229-4ubuntu16) ...
Paramétrage de desktop-file-utils (0.22-1ubuntu5.1) ...
Installation de la nouvelle version du fichier de configuration /etc/gnome/defaults.list ...
Paramétrage de firefox (52.0+build2-0ubuntu0.16.04.1) ...
Please restart all running instances of firefox, or you will experience problems.
Paramétrage de firefox-locale-en (52.0+build2-0ubuntu0.16.04.1) ...
Paramétrage de firefox-locale-fr (52.0+build2-0ubuntu0.16.04.1) ...
Paramétrage de libnm-util2:amd64 (1.2.6-0ubuntu0.16.04.1) ...
Paramétrage de libnm-glib-vpn1:amd64 (1.2.6-0ubuntu0.16.04.1) ...
Paramétrage de libnm-glib4:amd64 (1.2.6-0ubuntu0.16.04.1) ...
Paramétrage de libnm0:amd64 (1.2.6-0ubuntu0.16.04.1) ...
Paramétrage de linux-image-4.4.0-66-generic (4.4.0-66.87) ...
Running depmod.
update-initramfs: deferring update (hook will be called later)
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
run-parts: executing /etc/kernel/postinst.d/dkms 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
update-initramfs: Generating /boot/initrd.img-4.4.0-66-generic
run-parts: executing /etc/kernel/postinst.d/pm-utils 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
run-parts: executing /etc/kernel/postinst.d/unattended-upgrades 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
run-parts: executing /etc/kernel/postinst.d/update-notifier 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.4.0-66-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-66-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-64-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-64-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-22-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-22-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-21-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-21-generic
Adding boot menu entry for EFI firmware configuration
fait
Paramétrage de linux-image-extra-4.4.0-66-generic (4.4.0-66.87) ...
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
run-parts: executing /etc/kernel/postinst.d/dkms 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
update-initramfs: Generating /boot/initrd.img-4.4.0-66-generic
run-parts: executing /etc/kernel/postinst.d/pm-utils 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
run-parts: executing /etc/kernel/postinst.d/unattended-upgrades 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
run-parts: executing /etc/kernel/postinst.d/update-notifier 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.4.0-66-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-66-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-64-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-64-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-22-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-22-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-21-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-21-generic
Adding boot menu entry for EFI firmware configuration
fait
Paramétrage de linux-image-generic (4.4.0.66.70) ...
Paramétrage de linux-headers-4.4.0-66 (4.4.0-66.87) ...
Paramétrage de linux-headers-4.4.0-66-generic (4.4.0-66.87) ...
Examining /etc/kernel/header_postinst.d.
run-parts: executing /etc/kernel/header_postinst.d/dkms 4.4.0-66-generic /boot/vmlinuz-4.4.0-66-generic
Paramétrage de linux-headers-generic (4.4.0.66.70) ...
Paramétrage de linux-generic (4.4.0.66.70) ...
Paramétrage de linux-signed-image-4.4.0-66-generic (4.4.0-66.87) ...
warning: file-aligned section .text extends beyond end of file
warning: checksum areas are greater than image size. Invalid section table?
Création du fichier de configuration GRUB…
Attention : Définir GRUB_TIMEOUT à une valeur non nulle si GRUB_HIDDEN_TIMEOUT est définie n’est plus possible.
Image Linux trouvée : /boot/vmlinuz-4.4.0-66-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-66-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-64-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-64-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-22-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-22-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-21-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-21-generic
Adding boot menu entry for EFI firmware configuration
fait
Paramétrage de linux-signed-image-generic (4.4.0.66.70) ...
Paramétrage de linux-signed-generic (4.4.0.66.70) ...
Paramétrage de linux-libc-dev:amd64 (4.4.0-66.87) ...
Paramétrage de network-manager (1.2.6-0ubuntu0.16.04.1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu5) ...
benoit@benoit:~$ 
 

Il a travaillé pendant 3min ce matin contre 20 hier pour faire le full upgrade

Voila

Hors ligne

#42 Le 08/03/2017, à 08:25

cqfd93

Re : Installation SSD pour Ubuntu

Bonjour,

devy1 a écrit :

Il a travaillé pendant 3min ce matin contre 20 hier pour faire le full upgrade

C'est normal parce que tu avais pas mal de retard dans tes mises à jour à cause du manque de dépôts dans sources.list. Maintenant c'est à jour et tu peux finir par le ménage :

sudo apt-get clean
sudo apt-get autoremove
dpkg -l | grep ^rc | cut -d' ' -f3 | xargs sudo dpkg --purge

En ligne

#43 Le 08/03/2017, à 11:41

devy1

Re : Installation SSD pour Ubuntu

Donc voila :

 benoit@benoit:~$ sudo apt-get clean
[sudo] Mot de passe de benoit : 
benoit@benoit:~$ 
 benoit@benoit:~$ sudo apt-get autoremove
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les paquets suivants seront ENLEVÉS :
  linux-headers-4.4.0-21 linux-headers-4.4.0-21-generic linux-headers-4.4.0-22
  linux-headers-4.4.0-22-generic linux-image-4.4.0-21-generic
  linux-image-4.4.0-22-generic linux-image-extra-4.4.0-21-generic
  linux-image-extra-4.4.0-22-generic linux-signed-image-4.4.0-21-generic
  linux-signed-image-4.4.0-22-generic ubuntu-core-launcher
0 mis à jour, 0 nouvellement installés, 11 à enlever et 0 non mis à jour.
Après cette opération, 590 Mo d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] o
Annulation.
benoit@benoit:~$ 
benoit@benoit:~$ dpkg -l | grep ^rc | cut -d' ' -f3 | xargs sudo dpkg --purge
(Lecture de la base de données... 335830 fichiers et répertoires déjà installés.)
Suppression de fonts-droid (1:4.4.4r2-6ubuntu1) ...
Purge des fichiers de configuration de fonts-droid (1:4.4.4r2-6ubuntu1) ...
Suppression de gnome-ppp (0.3.23-1.2ubuntu1) ...
Purge des fichiers de configuration de gnome-ppp (0.3.23-1.2ubuntu1) ...
Suppression de gstreamer0.10-plugins-good:amd64 (0.10.31-3+nmu4ubuntu2~gcc5.1) ...
Purge des fichiers de configuration de gstreamer0.10-plugins-good:amd64 (0.10.31-3+nmu4ubuntu2~gcc5.1) ...
Suppression de inkscape (0.91-5ubuntu2) ...
Purge des fichiers de configuration de inkscape (0.91-5ubuntu2) ...
Suppression de libamd2.3.1:amd64 (1:4.2.1-3ubuntu1) ...
Purge des fichiers de configuration de libamd2.3.1:amd64 (1:4.2.1-3ubuntu1) ...
Suppression de libapt-inst1.7:amd64 (1.0.10.2ubuntu2) ...
Purge des fichiers de configuration de libapt-inst1.7:amd64 (1.0.10.2ubuntu2) ...
Suppression de libapt-pkg4.16:amd64 (1.0.10.2ubuntu2) ...
Purge des fichiers de configuration de libapt-pkg4.16:amd64 (1.0.10.2ubuntu2) ...
Suppression de libbasicusageenvironment0 (2014.01.13-1) ...
Purge des fichiers de configuration de libbasicusageenvironment0 (2014.01.13-1) ...
Suppression de libbind9-90 (1:9.9.5.dfsg-11ubuntu1.3) ...
Purge des fichiers de configuration de libbind9-90 (1:9.9.5.dfsg-11ubuntu1.3) ...
Suppression de libbonoboui2-0:amd64 (2.24.5-3ubuntu1) ...
Purge des fichiers de configuration de libbonoboui2-0:amd64 (2.24.5-3ubuntu1) ...
Suppression de libcamd2.3.1:amd64 (1:4.2.1-3ubuntu1) ...
Purge des fichiers de configuration de libcamd2.3.1:amd64 (1:4.2.1-3ubuntu1) ...
Suppression de libcamel-1.2-52 (3.16.5-1ubuntu3) ...
Purge des fichiers de configuration de libcamel-1.2-52 (3.16.5-1ubuntu3) ...
Suppression de libccolamd2.8.0:amd64 (1:4.2.1-3ubuntu1) ...
Purge des fichiers de configuration de libccolamd2.8.0:amd64 (1:4.2.1-3ubuntu1) ...
Suppression de libcdr-0.1-1v5 (0.1.1-2ubuntu1) ...
Purge des fichiers de configuration de libcdr-0.1-1v5 (0.1.1-2ubuntu1) ...
Suppression de libcheese-gtk23:amd64 (3.16.1-1ubuntu2) ...
Purge des fichiers de configuration de libcheese-gtk23:amd64 (3.16.1-1ubuntu2) ...
Suppression de libcheese7:amd64 (3.16.1-1ubuntu2) ...
Purge des fichiers de configuration de libcheese7:amd64 (3.16.1-1ubuntu2) ...
Suppression de libcholmod2.1.2:amd64 (1:4.2.1-3ubuntu1) ...
Purge des fichiers de configuration de libcholmod2.1.2:amd64 (1:4.2.1-3ubuntu1) ...
Suppression de libcolamd2.8.0:amd64 (1:4.2.1-3ubuntu1) ...
Purge des fichiers de configuration de libcolamd2.8.0:amd64 (1:4.2.1-3ubuntu1) ...
Suppression de libdns-export100 (1:9.9.5.dfsg-11ubuntu1.3) ...
Purge des fichiers de configuration de libdns-export100 (1:9.9.5.dfsg-11ubuntu1.3) ...
Suppression de libdns100 (1:9.9.5.dfsg-11ubuntu1.3) ...
Purge des fichiers de configuration de libdns100 (1:9.9.5.dfsg-11ubuntu1.3) ...
Suppression de libebook-contacts-1.2-1 (3.16.5-1ubuntu3) ...
Purge des fichiers de configuration de libebook-contacts-1.2-1 (3.16.5-1ubuntu3) ...
Suppression de libecal-1.2-18 (3.16.5-1ubuntu3) ...
Purge des fichiers de configuration de libecal-1.2-18 (3.16.5-1ubuntu3) ...
Suppression de libedata-cal-1.2-27 (3.16.5-1ubuntu3) ...
Purge des fichiers de configuration de libedata-cal-1.2-27 (3.16.5-1ubuntu3) ...
Suppression de libedataserver-1.2-20 (3.16.5-1ubuntu3) ...
Purge des fichiers de configuration de libedataserver-1.2-20 (3.16.5-1ubuntu3) ...
Suppression de libgee2:amd64 (0.6.8-2ubuntu1) ...
Purge des fichiers de configuration de libgee2:amd64 (0.6.8-2ubuntu1) ...
Suppression de libgif4:amd64 (4.1.6-11) ...
Purge des fichiers de configuration de libgif4:amd64 (4.1.6-11) ...
Suppression de libgif4:i386 (4.1.6-11) ...
Purge des fichiers de configuration de libgif4:i386 (4.1.6-11) ...
Suppression de libglew1.10:amd64 (1.10.0-3) ...
Purge des fichiers de configuration de libglew1.10:amd64 (1.10.0-3) ...
Suppression de libglewmx1.10:amd64 (1.10.0-3) ...
Purge des fichiers de configuration de libglewmx1.10:amd64 (1.10.0-3) ...
Suppression de libglib2.0-0:i386 (2.48.0-1ubuntu4) ...
Purge des fichiers de configuration de libglib2.0-0:i386 (2.48.0-1ubuntu4) ...
Suppression de libgnome-desktop-3-10:amd64 (3.16.2-2ubuntu2) ...
Purge des fichiers de configuration de libgnome-desktop-3-10:amd64 (3.16.2-2ubuntu2) ...
Suppression de libgnomecanvas2-0:amd64 (2.30.3-2) ...
Purge des fichiers de configuration de libgnomecanvas2-0:amd64 (2.30.3-2) ...
Suppression de libgnutls-deb0-28:amd64 (3.3.15-5ubuntu2) ...
Purge des fichiers de configuration de libgnutls-deb0-28:amd64 (3.3.15-5ubuntu2) ...
Suppression de libgnutls-deb0-28:i386 (3.3.15-5ubuntu2) ...
Purge des fichiers de configuration de libgnutls-deb0-28:i386 (3.3.15-5ubuntu2) ...
Suppression de libgroupsock1 (2014.01.13-1) ...
Purge des fichiers de configuration de libgroupsock1 (2014.01.13-1) ...
Suppression de libgsl0ldbl:amd64 (1.16+dfsg-4) ...
Purge des fichiers de configuration de libgsl0ldbl:amd64 (1.16+dfsg-4) ...
Suppression de libgstreamer-plugins-base0.10-0:i386 (0.10.36-2) ...
Purge des fichiers de configuration de libgstreamer-plugins-base0.10-0:i386 (0.10.36-2) ...
Suppression de libgstreamer0.10-0:i386 (0.10.36-1.5ubuntu1) ...
Purge des fichiers de configuration de libgstreamer0.10-0:i386 (0.10.36-1.5ubuntu1) ...
Suppression de libgtop2-10 (2.30.0.is.2.30.0-0ubuntu1) ...
Purge des fichiers de configuration de libgtop2-10 (2.30.0.is.2.30.0-0ubuntu1) ...
Suppression de libidl0:amd64 (0.8.14-1) ...
Purge des fichiers de configuration de libidl0:amd64 (0.8.14-1) ...
Suppression de libieee1284-3:i386 (0.2.11-12) ...
Purge des fichiers de configuration de libieee1284-3:i386 (0.2.11-12) ...
Suppression de libimobiledevice4:amd64 (1.1.6+dfsg-3.1build1) ...
Purge des fichiers de configuration de libimobiledevice4:amd64 (1.1.6+dfsg-3.1build1) ...
Suppression de libirs-export91 (1:9.9.5.dfsg-11ubuntu1.3) ...
Purge des fichiers de configuration de libirs-export91 (1:9.9.5.dfsg-11ubuntu1.3) ...
Suppression de libisc-export95 (1:9.9.5.dfsg-11ubuntu1.3) ...
Purge des fichiers de configuration de libisc-export95 (1:9.9.5.dfsg-11ubuntu1.3) ...
Suppression de libisc95 (1:9.9.5.dfsg-11ubuntu1.3) ...
Purge des fichiers de configuration de libisc95 (1:9.9.5.dfsg-11ubuntu1.3) ...
Suppression de libisccc90 (1:9.9.5.dfsg-11ubuntu1.3) ...
Purge des fichiers de configuration de libisccc90 (1:9.9.5.dfsg-11ubuntu1.3) ...
Suppression de libisccfg-export90 (1:9.9.5.dfsg-11ubuntu1.3) ...
Purge des fichiers de configuration de libisccfg-export90 (1:9.9.5.dfsg-11ubuntu1.3) ...
Suppression de libisccfg90 (1:9.9.5.dfsg-11ubuntu1.3) ...
Purge des fichiers de configuration de libisccfg90 (1:9.9.5.dfsg-11ubuntu1.3) ...
Suppression de libisl13:amd64 (0.14-2) ...
Purge des fichiers de configuration de libisl13:amd64 (0.14-2) ...
Suppression de liblivemedia23 (2014.01.13-1) ...
Purge des fichiers de configuration de liblivemedia23 (2014.01.13-1) ...
Suppression de liblouis2:amd64 (2.6.2-2) ...
Purge des fichiers de configuration de liblouis2:amd64 (2.6.2-2) ...
Suppression de liblwres90 (1:9.9.5.dfsg-11ubuntu1.3) ...
Purge des fichiers de configuration de liblwres90 (1:9.9.5.dfsg-11ubuntu1.3) ...
Suppression de libmagick++-6.q16-5v5:amd64 (8:6.8.9.9-5ubuntu2) ...
Purge des fichiers de configuration de libmagick++-6.q16-5v5:amd64 (8:6.8.9.9-5ubuntu2) ...
Suppression de libmetacity-private3 (1:3.17.2-4ubuntu1) ...
Purge des fichiers de configuration de libmetacity-private3 (1:3.17.2-4ubuntu1) ...
Suppression de libmwaw-0.3-3v5 (0.3.5-1ubuntu1) ...
Purge des fichiers de configuration de libmwaw-0.3-3v5 (0.3.5-1ubuntu1) ...
Suppression de libodfgen-0.1-1v5 (0.1.4-1ubuntu1) ...
Purge des fichiers de configuration de libodfgen-0.1-1v5 (0.1.4-1ubuntu1) ...
Suppression de libpgm-5.1-0:amd64 (5.1.118-1~dfsg-2ubuntu1) ...
Purge des fichiers de configuration de libpgm-5.1-0:amd64 (5.1.118-1~dfsg-2ubuntu1) ...
Suppression de libpoppler52:amd64 (0.33.0-0ubuntu3) ...
Purge des fichiers de configuration de libpoppler52:amd64 (0.33.0-0ubuntu3) ...
Suppression de libprocps3:amd64 (1:3.3.9-1ubuntu8) ...
Purge des fichiers de configuration de libprocps3:amd64 (1:3.3.9-1ubuntu8) ...
Suppression de libpth20:amd64 (2.0.7-20) ...
Purge des fichiers de configuration de libpth20:amd64 (2.0.7-20) ...
Suppression de libpython3.4:amd64 (3.4.3-9ubuntu1) ...
Purge des fichiers de configuration de libpython3.4:amd64 (3.4.3-9ubuntu1) ...
Suppression de libpython3.4-minimal:amd64 (3.4.3-9ubuntu1) ...
Purge des fichiers de configuration de libpython3.4-minimal:amd64 (3.4.3-9ubuntu1) ...
Suppression de libqapt3-runtime (3.0.2-0ubuntu1) ...
Purge des fichiers de configuration de libqapt3-runtime (3.0.2-0ubuntu1) ...
Suppression de libqca2v5:amd64 (2.1.0-0ubuntu10) ...
Purge des fichiers de configuration de libqca2v5:amd64 (2.1.0-0ubuntu10) ...
Suppression de libqpdf13v5:amd64 (5.1.3-2) ...
Purge des fichiers de configuration de libqpdf13v5:amd64 (5.1.3-2) ...
Suppression de libraw10:amd64 (0.16.2-1) ...
Purge des fichiers de configuration de libraw10:amd64 (0.16.2-1) ...
Suppression de libsodium13:amd64 (1.0.3-1) ...
Purge des fichiers de configuration de libsodium13:amd64 (1.0.3-1) ...
Suppression de libsoundtouch0:amd64 (1.9.0-1) ...
Purge des fichiers de configuration de libsoundtouch0:amd64 (1.9.0-1) ...
Suppression de libumfpack5.6.2:amd64 (1:4.2.1-3ubuntu1) ...
Purge des fichiers de configuration de libumfpack5.6.2:amd64 (1:4.2.1-3ubuntu1) ...
Suppression de libusageenvironment1 (2014.01.13-1) ...
Purge des fichiers de configuration de libusageenvironment1 (2014.01.13-1) ...
Suppression de libusbmuxd2:amd64 (1.0.9-1build1) ...
Purge des fichiers de configuration de libusbmuxd2:amd64 (1.0.9-1build1) ...
Suppression de libvoikko1v5:amd64 (3.7.1-1ubuntu1) ...
Purge des fichiers de configuration de libvoikko1v5:amd64 (3.7.1-1ubuntu1) ...
Suppression de libvpx2:amd64 (1.4.0-4) ...
Purge des fichiers de configuration de libvpx2:amd64 (1.4.0-4) ...
Suppression de libvpx2:i386 (1.4.0-4) ...
Purge des fichiers de configuration de libvpx2:i386 (1.4.0-4) ...
Suppression de libx264-146:amd64 (2:0.146.2555+git0c21480-1) ...
Purge des fichiers de configuration de libx264-146:amd64 (2:0.146.2555+git0c21480-1) ...
Suppression de libx265-59:amd64 (1.7-4) ...
Purge des fichiers de configuration de libx265-59:amd64 (1.7-4) ...
Suppression de libxtables10 (1.4.21-2ubuntu2) ...
Purge des fichiers de configuration de libxtables10 (1.4.21-2ubuntu2) ...
Suppression de libzmq3:amd64 (4.0.5+dfsg-3ubuntu1~gcc5.1) ...
Purge des fichiers de configuration de libzmq3:amd64 (4.0.5+dfsg-3ubuntu1~gcc5.1) ...
Suppression de linux-image-4.2.0-16-generic (4.2.0-16.19) ...
Purge des fichiers de configuration de linux-image-4.2.0-16-generic (4.2.0-16.19) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.2.0-16-generic /boot/vmlinuz-4.2.0-16-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.2.0-16-generic /boot/vmlinuz-4.2.0-16-generic
Suppression de linux-image-4.2.0-18-generic (4.2.0-18.22) ...
Purge des fichiers de configuration de linux-image-4.2.0-18-generic (4.2.0-18.22) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.2.0-18-generic /boot/vmlinuz-4.2.0-18-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.2.0-18-generic /boot/vmlinuz-4.2.0-18-generic
Suppression de linux-image-4.2.0-19-generic (4.2.0-19.23) ...
Purge des fichiers de configuration de linux-image-4.2.0-19-generic (4.2.0-19.23) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.2.0-19-generic /boot/vmlinuz-4.2.0-19-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.2.0-19-generic /boot/vmlinuz-4.2.0-19-generic
Suppression de linux-image-4.2.0-21-generic (4.2.0-21.25) ...
Purge des fichiers de configuration de linux-image-4.2.0-21-generic (4.2.0-21.25) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.2.0-21-generic /boot/vmlinuz-4.2.0-21-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.2.0-21-generic /boot/vmlinuz-4.2.0-21-generic
Suppression de linux-image-4.2.0-22-generic (4.2.0-22.27) ...
Purge des fichiers de configuration de linux-image-4.2.0-22-generic (4.2.0-22.27) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.2.0-22-generic /boot/vmlinuz-4.2.0-22-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.2.0-22-generic /boot/vmlinuz-4.2.0-22-generic
Suppression de linux-image-4.2.0-23-generic (4.2.0-23.28) ...
Purge des fichiers de configuration de linux-image-4.2.0-23-generic (4.2.0-23.28) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.2.0-23-generic /boot/vmlinuz-4.2.0-23-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.2.0-23-generic /boot/vmlinuz-4.2.0-23-generic
Suppression de linux-image-4.2.0-25-generic (4.2.0-25.30) ...
Purge des fichiers de configuration de linux-image-4.2.0-25-generic (4.2.0-25.30) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.2.0-25-generic /boot/vmlinuz-4.2.0-25-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.2.0-25-generic /boot/vmlinuz-4.2.0-25-generic
Suppression de linux-image-4.2.0-27-generic (4.2.0-27.32) ...
Purge des fichiers de configuration de linux-image-4.2.0-27-generic (4.2.0-27.32) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.2.0-27-generic /boot/vmlinuz-4.2.0-27-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.2.0-27-generic /boot/vmlinuz-4.2.0-27-generic
Suppression de linux-image-4.2.0-30-generic (4.2.0-30.36) ...
Purge des fichiers de configuration de linux-image-4.2.0-30-generic (4.2.0-30.36) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.2.0-30-generic /boot/vmlinuz-4.2.0-30-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.2.0-30-generic /boot/vmlinuz-4.2.0-30-generic
Suppression de linux-image-4.2.0-34-generic (4.2.0-34.39) ...
Purge des fichiers de configuration de linux-image-4.2.0-34-generic (4.2.0-34.39) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.2.0-34-generic /boot/vmlinuz-4.2.0-34-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.2.0-34-generic /boot/vmlinuz-4.2.0-34-generic
Suppression de linux-image-4.2.0-35-generic (4.2.0-35.40) ...
Purge des fichiers de configuration de linux-image-4.2.0-35-generic (4.2.0-35.40) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.2.0-35-generic /boot/vmlinuz-4.2.0-35-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 4.2.0-35-generic /boot/vmlinuz-4.2.0-35-generic
Suppression de linux-image-extra-4.2.0-16-generic (4.2.0-16.19) ...
Purge des fichiers de configuration de linux-image-extra-4.2.0-16-generic (4.2.0-16.19) ...
Suppression de linux-image-extra-4.2.0-18-generic (4.2.0-18.22) ...
Purge des fichiers de configuration de linux-image-extra-4.2.0-18-generic (4.2.0-18.22) ...
Suppression de linux-image-extra-4.2.0-19-generic (4.2.0-19.23) ...
Purge des fichiers de configuration de linux-image-extra-4.2.0-19-generic (4.2.0-19.23) ...
Suppression de linux-image-extra-4.2.0-21-generic (4.2.0-21.25) ...
Purge des fichiers de configuration de linux-image-extra-4.2.0-21-generic (4.2.0-21.25) ...
Suppression de linux-image-extra-4.2.0-22-generic (4.2.0-22.27) ...
Purge des fichiers de configuration de linux-image-extra-4.2.0-22-generic (4.2.0-22.27) ...
Suppression de linux-image-extra-4.2.0-23-generic (4.2.0-23.28) ...
Purge des fichiers de configuration de linux-image-extra-4.2.0-23-generic (4.2.0-23.28) ...
Suppression de linux-image-extra-4.2.0-25-generic (4.2.0-25.30) ...
Purge des fichiers de configuration de linux-image-extra-4.2.0-25-generic (4.2.0-25.30) ...
Suppression de linux-image-extra-4.2.0-27-generic (4.2.0-27.32) ...
Purge des fichiers de configuration de linux-image-extra-4.2.0-27-generic (4.2.0-27.32) ...
Suppression de linux-image-extra-4.2.0-30-generic (4.2.0-30.36) ...
Purge des fichiers de configuration de linux-image-extra-4.2.0-30-generic (4.2.0-30.36) ...
Suppression de linux-image-extra-4.2.0-34-generic (4.2.0-34.39) ...
Purge des fichiers de configuration de linux-image-extra-4.2.0-34-generic (4.2.0-34.39) ...
Suppression de linux-image-extra-4.2.0-35-generic (4.2.0-35.40) ...
Purge des fichiers de configuration de linux-image-extra-4.2.0-35-generic (4.2.0-35.40) ...
Suppression de linux-signed-image-4.2.0-18-generic (4.2.0-18.22) ...
Purge des fichiers de configuration de linux-signed-image-4.2.0-18-generic (4.2.0-18.22) ...
Suppression de linux-signed-image-4.2.0-19-generic (4.2.0-19.23) ...
Purge des fichiers de configuration de linux-signed-image-4.2.0-19-generic (4.2.0-19.23) ...
Suppression de linux-signed-image-4.2.0-21-generic (4.2.0-21.25) ...
Purge des fichiers de configuration de linux-signed-image-4.2.0-21-generic (4.2.0-21.25) ...
Suppression de linux-signed-image-4.2.0-22-generic (4.2.0-22.27) ...
Purge des fichiers de configuration de linux-signed-image-4.2.0-22-generic (4.2.0-22.27) ...
Suppression de linux-signed-image-4.2.0-23-generic (4.2.0-23.28) ...
Purge des fichiers de configuration de linux-signed-image-4.2.0-23-generic (4.2.0-23.28) ...
Suppression de linux-signed-image-4.2.0-25-generic (4.2.0-25.30) ...
Purge des fichiers de configuration de linux-signed-image-4.2.0-25-generic (4.2.0-25.30) ...
Suppression de linux-signed-image-4.2.0-27-generic (4.2.0-27.32) ...
Purge des fichiers de configuration de linux-signed-image-4.2.0-27-generic (4.2.0-27.32) ...
Suppression de linux-signed-image-4.2.0-30-generic (4.2.0-30.36) ...
Purge des fichiers de configuration de linux-signed-image-4.2.0-30-generic (4.2.0-30.36) ...
Suppression de linux-signed-image-4.2.0-34-generic (4.2.0-34.39) ...
Purge des fichiers de configuration de linux-signed-image-4.2.0-34-generic (4.2.0-34.39) ...
Suppression de linux-signed-image-4.2.0-35-generic (4.2.0-35.40) ...
Purge des fichiers de configuration de linux-signed-image-4.2.0-35-generic (4.2.0-35.40) ...
Suppression de myspell-en-au (2.1-5.4) ...
Purge des fichiers de configuration de myspell-en-au (2.1-5.4) ...
Suppression de openjdk-6-jre-headless:amd64 (6b38-1.13.10-0ubuntu0.15.10.1) ...
Purge des fichiers de configuration de openjdk-6-jre-headless:amd64 (6b38-1.13.10-0ubuntu0.15.10.1) ...
Suppression de perl-modules (5.20.2-6ubuntu0.2) ...
Purge des fichiers de configuration de perl-modules (5.20.2-6ubuntu0.2) ...
Suppression de python3.4 (3.4.3-9ubuntu1) ...
Purge des fichiers de configuration de python3.4 (3.4.3-9ubuntu1) ...
Suppression de python3.4-minimal (3.4.3-9ubuntu1) ...
Purge des fichiers de configuration de python3.4-minimal (3.4.3-9ubuntu1) ...
Suppression de telepathy-indicator (0.3.1+14.10.20140908-0ubuntu1) ...
Purge des fichiers de configuration de telepathy-indicator (0.3.1+14.10.20140908-0ubuntu1) ...
Suppression de ttf-indic-fonts-core (1:0.5.14ubuntu1) ...
Purge des fichiers de configuration de ttf-indic-fonts-core (1:0.5.14ubuntu1) ...
Traitement des actions différées (« triggers ») pour libglib2.0-0:amd64 (2.48.2-0ubuntu1) ...
benoit@benoit:~$ 
 

Hors ligne

#44 Le 08/03/2017, à 18:27

cqfd93

Re : Installation SSD pour Ubuntu

Après tout ça, ton système est propre, est-ce que tout marche bien ?

En ligne

#45 Le 08/03/2017, à 19:02

devy1

Re : Installation SSD pour Ubuntu

Ben j'ai pas vu trop de différence, il met toujours autant de temps à démarrer (je viens de faire deux redémarrages successifs, en 3 minutes 30 avant de pouvoir etre sur chrome ...).
Il a même planté sur minecraft cet après midi ...
Enfin bon, ça reste un ordi de maison, peut être réinstaller ubuntu sur un SSD ? Ou repasser sur 14.04, ou acheter un ordi asus ou autre marque plus compatible que HP ...
Qu'en pense-tu ?

Dernière modification par devy1 (Le 08/03/2017, à 19:12)

Hors ligne

#46 Le 08/03/2017, à 19:31

cqfd93

Re : Installation SSD pour Ubuntu

Pour ton problème de lenteur au démarrage, je n'ai rien à te suggérer, désolée.

En ligne

#47 Le 08/03/2017, à 19:45

Bougron

Re : Installation SSD pour Ubuntu

Bonsoir
Pour la durée anormalement longue de ton boot
Peux-tu donner l'état actuel du disque dur  paragraphe 4 de https://doc.ubuntu-fr.org/smartmontools

Ainsi qu'une trace du démarrage.J'en demanderais peut-être plus, si les 1000 lignes ne suffisent pas.

dmesg | head -1500 | tail -1000

Ubuntu  BASH 16.04.1 sous windows 10
Lubuntu 14.04.4 en 32 bits pour un vaio pcg-k215s
Ubuntu 16.04.2 avec le noyau 4.4.0-64 et  avec le noyau 4.8.0.36
Un site que les débutants en ubuntu doivent consulter  http://ubuntu.i17.fr/

Hors ligne

#48 Le 08/03/2017, à 20:05

lepetit

Re : Installation SSD pour Ubuntu

au final, tu l'as mis le kernel 4.8 ?

Hors ligne

#49 Le 08/03/2017, à 22:11

devy1

Re : Installation SSD pour Ubuntu

Bougron :

 benoit@benoit:~$ sudo smartctl -s on -a /dev/sdX
[sudo] Mot de passe de benoit : 
sudo: smartctl : commande introuvable
benoit@benoit:~$ sudo smartctl -s on -d ata -a /dev/sdX
sudo: smartctl : commande introuvable
benoit@benoit:~$ sudo smartctl -s on -d sat -a /dev/sdX
sudo: smartctl : commande introuvable
benoit@benoit:~$ sudo smartctl -s on -d scsi -a /dev/sdX
sudo: smartctl : commande introuvable
benoit@benoit:~$ sudo smartctl -s on -d auto -T verypermissive -a /dev/sdX
sudo: smartctl : commande introuvable
benoit@benoit:~$ sudo smartctl -s on -d test -T verypermissive -a /dev/sdX
sudo: smartctl : commande introuvable
benoit@benoit:~$ 

 

pour la trace de démarrage ;

benoit@benoit:~$ dmesg | head -1500 | tail -1000
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 00000001bf000000 aka 7152M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x7f000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[    0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[    0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[    0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[    0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[    0.000000] BRK [0x02211000, 0x02211fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33796000-0x35bc2fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007CEC8000 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x000000007CEC80A0 0000BC (v01 HPQOEM SLIC-MPC 01072009 HP   00010013)
[    0.000000] ACPI: FACP 0x000000007CED84C8 00010C (v05 HPQOEM SLIC-MPC 01072009 HP   00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
[    0.000000] ACPI: DSDT 0x000000007CEC81E8 0102DA (v02 HPQOEM 2268     00000000 ACPI 20051117)
[    0.000000] ACPI: FACS 0x000000007CFF9F80 000040
[    0.000000] ACPI: APIC 0x000000007CED85D8 00007E (v03 HPQOEM 2268     01072009 HP   00010013)
[    0.000000] ACPI: FPDT 0x000000007CED8658 000044 (v01 HPQOEM 2268     01072009 HP   00010013)
[    0.000000] ACPI: FIDT 0x000000007CED86A0 00009C (v01 HPQOEM 2268     01072009 HP   00010013)
[    0.000000] ACPI: WDAT 0x000000007CED8740 0001AC (v01 HPQOEM 2268     01072009 HP   00010013)
[    0.000000] ACPI: MCFG 0x000000007CED88F0 00003C (v01 HPQOEM 2268     01072009 HP   00010013)
[    0.000000] ACPI: BOOT 0x000000007CED8930 000028 (v01 HPQOEM 2268     01072009 HP   00010013)
[    0.000000] ACPI: MSDM 0x000000007CED8958 000055 (v03 HPQOEM SLIC-MPC 00000001 ACPI 00010013)
[    0.000000] ACPI: HPET 0x000000007CED89B0 000038 (v01 HPQOEM 2268     01072009 HP   00000005)
[    0.000000] ACPI: WDRT 0x000000007CED89E8 000047 (v01 HPQOEM 2268     01072009 HP   00000005)
[    0.000000] ACPI: UEFI 0x000000007CED8A30 000042 (v01 HPQOEM 2268     01072009 HP   00000000)
[    0.000000] ACPI: VFCT 0x000000007CED8A78 00EC84 (v01 HPQOEM 2268     00000001 AMD  31504F47)
[    0.000000] ACPI: SSDT 0x000000007CEE7700 000CB4 (v01 HPQOEM 2268     00000001 ACPI 00000001)
[    0.000000] ACPI: SSDT 0x000000007CEE83B8 00487A (v02 HPQOEM 2268     00000002 ACPI 04000000)
[    0.000000] ACPI: SSDT 0x000000007CEECC38 00071B (v01 HPQOEM 2268     00000001 ACPI 20051117)
[    0.000000] ACPI: SSDT 0x000000007CEED358 001207 (v01 HPQOEM 2268     00000001 ACPI 20051117)
[    0.000000] ACPI: SSDT 0x000000007CEEE560 001457 (v01 HPQOEM 2268     00000001 ACPI 20051117)
[    0.000000] ACPI: SSDT 0x000000007CEEF9B8 000FB2 (v01 HPQOEM 2268     00000001 ACPI 20051117)
[    0.000000] ACPI: BGRT 0x000000007CEF0970 000038 (v01 HPQOEM 2268     01072009 HP   00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001beffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1beff7000-0x1beffbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001beffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ce0dfff]
[    0.000000]   node   0: [mem 0x000000007e2ba000-0x000000007e2bafff]
[    0.000000]   node   0: [mem 0x000000007e2c3000-0x000000007e412fff]
[    0.000000]   node   0: [mem 0x000000007eaf7000-0x000000007eb56fff]
[    0.000000]   node   0: [mem 0x000000007eff0000-0x000000007effffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001beffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001beffffff]
[    0.000000] On node 0 totalpages: 1294190
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 23 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7936 pages used for memmap
[    0.000000]   DMA32 zone: 507855 pages, LIFO batch:31
[    0.000000]   Normal zone: 12224 pages used for memmap
[    0.000000]   Normal zone: 782336 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ce0e000-0x7ceb3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ceb4000-0x7cef0fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7cef1000-0x7d004fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d005000-0x7e271fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7e272000-0x7e2b9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7e2bb000-0x7e2c2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7e413000-0x7eaf6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7eb57000-0x7efeffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb01000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x7f000000-0xfeafffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff8801bec00000 s98264 r8192 d28712 u524288
[    0.000000] pcpu-alloc: s98264 r8192 d28712 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1273943
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-66-generic.efi.signed root=UUID=470a561f-9af9-44ff-beaf-432d071bf9c3 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4933832K/5176760K available (8452K kernel code, 1293K rwdata, 3980K rodata, 1488K init, 1316K bss, 242928K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1000 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1796.782 MHz processor
[    0.000049] Calibrating delay loop (skipped), value calculated using timer frequency.. 3593.56 BogoMIPS (lpj=7187128)
[    0.000056] pid_max: default: 32768 minimum: 301
[    0.000068] ACPI: Core revision 20150930
[    0.031986] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.032936] Security Framework initialized
[    0.032941] Yama: becoming mindful.
[    0.032968] AppArmor: AppArmor initialized
[    0.033903] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.037548] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.039214] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.039238] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.039661] Initializing cgroup subsys io
[    0.039669] Initializing cgroup subsys memory
[    0.039684] Initializing cgroup subsys devices
[    0.039689] Initializing cgroup subsys freezer
[    0.039695] Initializing cgroup subsys net_cls
[    0.039700] Initializing cgroup subsys perf_event
[    0.039706] Initializing cgroup subsys net_prio
[    0.039714] Initializing cgroup subsys hugetlb
[    0.039718] Initializing cgroup subsys pids
[    0.039767] CPU: Physical Processor ID: 0
[    0.039769] CPU: Processor Core ID: 0
[    0.048768] mce: CPU supports 6 MCE banks
[    0.048781] LVT offset 1 assigned for vector 0xf9
[    0.048788] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.048791] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[    0.049312] Freeing SMP alternatives memory: 32K (ffffffff820b9000 - ffffffff820c1000)
[    0.078311] ftrace: allocating 32123 entries in 126 pages
[    0.101154] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.101160] smpboot: Max logical packages: 1
[    0.101724] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.246350] smpboot: CPU0: AMD A4-6210 APU with AMD Radeon R3 Graphics (family: 0x16, model: 0x30, stepping: 0x1)
[    0.246387] Performance Events: AMD PMU driver.
[    0.246395] ... version:                0
[    0.246398] ... bit width:              48
[    0.246400] ... generic registers:      4
[    0.246402] ... value mask:             0000ffffffffffff
[    0.246404] ... max period:             00007fffffffffff
[    0.246406] ... fixed-purpose events:   0
[    0.246408] ... event mask:             000000000000000f
[    0.247815] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.247976] x86: Booting SMP configuration:
[    0.247980] .... node  #0, CPUs:      #1 #2 #3
[    0.282107] x86: Booted up 1 node, 4 CPUs
[    0.282116] smpboot: Total of 4 processors activated (14374.25 BogoMIPS)
[    0.283296] devtmpfs: initialized
[    0.291063] evm: security.selinux
[    0.291066] evm: security.SMACK64
[    0.291069] evm: security.SMACK64EXEC
[    0.291071] evm: security.SMACK64TRANSMUTE
[    0.291073] evm: security.SMACK64MMAP
[    0.291074] evm: security.ima
[    0.291076] evm: security.capability
[    0.291244] PM: Registering ACPI NVS region [mem 0x7cef1000-0x7d004fff] (1130496 bytes)
[    0.291285] PM: Registering ACPI NVS region [mem 0x7e2bb000-0x7e2c2fff] (32768 bytes)
[    0.291423] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.291585] pinctrl core: initialized pinctrl subsystem
[    0.291774] RTC time: 18:03:01, date: 03/08/17
[    0.292114] NET: Registered protocol family 16
[    0.302497] cpuidle: using governor ladder
[    0.314495] cpuidle: using governor menu
[    0.314515] PCCT header not found.
[    0.314677] Simple Boot Flag at 0x47 set to 0x1
[    0.314792] ACPI: bus type PCI registered
[    0.314796] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.314956] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.314961] PCI: not using MMCONFIG
[    0.314964] PCI: Using configuration type 1 for base access
[    0.314965] PCI: Using configuration type 1 for extended access
[    0.327443] ACPI: Added _OSI(Module Device)
[    0.327449] ACPI: Added _OSI(Processor Device)
[    0.327452] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.327455] ACPI: Added _OSI(Processor Aggregator Device)
[    0.332065] ACPI: Executed 1 blocks of module-level executable AML code
[    0.339804] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.343793] ACPI : EC: EC started
[    0.771436] ACPI: Interpreter enabled
[    0.771495] ACPI: (supports S0 S3 S4 S5)
[    0.771499] ACPI: Using IOAPIC for interrupt routing
[    0.771581] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.771681] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.771721] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.772678] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.772943] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.788984] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.788997] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.789365] acpi PNP0A08:00: _OSC: platform does not support [PME]
[    0.789713] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
[    0.790270] PCI host bridge to bus 0000:00
[    0.790277] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.790282] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.790286] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.790291] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.790295] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.790299] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.790303] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.790316] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.790331] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
[    0.790519] pci 0000:00:01.0: [1002:9850] type 00 class 0x030000
[    0.790552] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.790566] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[    0.790576] pci 0000:00:01.0: reg 0x20: [io  0xf000-0xf0ff]
[    0.790586] pci 0000:00:01.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
[    0.790596] pci 0000:00:01.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
[    0.790641] pci 0000:00:01.0: supports D1 D2
[    0.790645] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.790799] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[    0.790829] pci 0000:00:01.1: reg 0x10: [mem 0xfea64000-0xfea67fff 64bit]
[    0.790884] pci 0000:00:01.1: supports D1 D2
[    0.791007] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
[    0.791170] pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
[    0.791257] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[    0.791403] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
[    0.791487] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[    0.791631] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[    0.791715] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[    0.791793] pci 0000:00:02.3: System wakeup disabled by ACPI
[    0.791872] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
[    0.791956] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
[    0.792105] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
[    0.792129] pci 0000:00:08.0: reg 0x10: [mem 0xd0800000-0xd081ffff 64bit pref]
[    0.792138] pci 0000:00:08.0: reg 0x18: [mem 0xfe600000-0xfe6fffff]
[    0.792147] pci 0000:00:08.0: reg 0x1c: [mem 0xfea6f000-0xfea6ffff]
[    0.792161] pci 0000:00:08.0: reg 0x24: [mem 0xfea6a000-0xfea6bfff]
[    0.792320] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    0.792363] pci 0000:00:10.0: reg 0x10: [mem 0xfea68000-0xfea69fff 64bit]
[    0.792455] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.792533] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.792610] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
[    0.792643] pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
[    0.792654] pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
[    0.792665] pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
[    0.792676] pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
[    0.792687] pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
[    0.792699] pci 0000:00:11.0: reg 0x24: [mem 0xfea6e000-0xfea6e3ff]
[    0.792740] pci 0000:00:11.0: PME# supported from D3hot
[    0.792978] pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
[    0.793006] pci 0000:00:12.0: reg 0x10: [mem 0xfea6d000-0xfea6d0ff]
[    0.793081] pci 0000:00:12.0: supports D1 D2
[    0.793085] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.793159] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.793233] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
[    0.793261] pci 0000:00:13.0: reg 0x10: [mem 0xfea6c000-0xfea6c0ff]
[    0.793335] pci 0000:00:13.0: supports D1 D2
[    0.793339] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.793409] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.793482] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.793663] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.793692] pci 0000:00:14.2: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
[    0.793757] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.793830] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.793903] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.794101] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
[    0.794239] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
[    0.794383] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
[    0.794518] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
[    0.794658] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
[    0.794794] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
[    0.795051] pci 0000:00:02.1: PCI bridge to [bus 01]
[    0.795209] pci 0000:02:00.0: [10ec:b723] type 00 class 0x028000
[    0.795302] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.795381] pci 0000:02:00.0: reg 0x18: [mem 0xfe900000-0xfe903fff 64bit]
[    0.795578] pci 0000:02:00.0: supports D1 D2
[    0.795582] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.802532] pci 0000:00:02.2: PCI bridge to [bus 02]
[    0.802546] pci 0000:00:02.2:   bridge window [io  0xe000-0xefff]
[    0.802553] pci 0000:00:02.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.802729] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.802774] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.802799] pci 0000:03:00.0: reg 0x18: [mem 0xfe814000-0xfe814fff 64bit pref]
[    0.802816] pci 0000:03:00.0: reg 0x20: [mem 0xfe810000-0xfe813fff 64bit pref]
[    0.802827] pci 0000:03:00.0: reg 0x30: [mem 0xfe800000-0xfe80ffff pref]
[    0.802907] pci 0000:03:00.0: supports D1 D2
[    0.802911] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.803512] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.810480] pci 0000:00:02.3: PCI bridge to [bus 03]
[    0.810494] pci 0000:00:02.3:   bridge window [io  0xd000-0xdfff]
[    0.810500] pci 0000:00:02.3:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.810652] pci 0000:04:00.0: [10ec:5229] type 00 class 0xff0000
[    0.810693] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe700fff]
[    0.810811] pci 0000:04:00.0: supports D1 D2
[    0.810815] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[    0.818485] pci 0000:00:02.5: PCI bridge to [bus 04]
[    0.818501] pci 0000:00:02.5:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.821103] ACPI: IRQ 7 override to edge, high
[    0.821329] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.821475] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.821644] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.821812] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.821950] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.822070] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.822189] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.822323] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.823600] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.823886] vgaarb: setting as boot device: PCI:0000:00:01.0
[    0.823892] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.823901] vgaarb: loaded
[    0.823904] vgaarb: bridge control possible 0000:00:01.0
[    0.824503] SCSI subsystem initialized
[    0.824654] libata version 3.00 loaded.
[    0.824716] ACPI: bus type USB registered
[    0.824759] usbcore: registered new interface driver usbfs
[    0.824783] usbcore: registered new interface driver hub
[    0.824829] usbcore: registered new device driver usb
[    0.825317] PCI: Using ACPI for IRQ routing
[    0.833249] PCI: pci_cache_line_size set to 64 bytes
[    0.833414] e820: reserve RAM buffer [mem 0x7ce0e000-0x7fffffff]
[    0.833418] e820: reserve RAM buffer [mem 0x7e2bb000-0x7fffffff]
[    0.833421] e820: reserve RAM buffer [mem 0x7e413000-0x7fffffff]
[    0.833424] e820: reserve RAM buffer [mem 0x7eb57000-0x7fffffff]
[    0.833427] e820: reserve RAM buffer [mem 0x7f000000-0x7fffffff]
[    0.833430] e820: reserve RAM buffer [mem 0x1bf000000-0x1bfffffff]
[    0.833644] NetLabel: Initializing
[    0.833648] NetLabel:  domain hash size = 128
[    0.833649] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.833679] NetLabel:  unlabeled traffic allowed by default
[    0.833849] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.833856] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.835944] clocksource: Switched to clocksource hpet
[    0.849147] AppArmor: AppArmor Filesystem Enabled
[    0.849290] pnp: PnP ACPI init
[    0.849547] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.849557] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.849718] system 00:01: [mem 0x80000000-0xbfffffff] has been reserved
[    0.849724] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.849862] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.849954] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.850069] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.850075] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.850158] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.850222] pnp 00:06: Plug and Play ACPI device, IDs SYN1ebc PNP0f13 (active)
[    0.850726] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.850731] system 00:07: [io  0x040b] has been reserved
[    0.850735] system 00:07: [io  0x04d6] has been reserved
[    0.850740] system 00:07: [io  0x0c00-0x0c01] has been reserved
[    0.850743] system 00:07: [io  0x0c14] has been reserved
[    0.850747] system 00:07: [io  0x0c50-0x0c51] has been reserved
[    0.850751] system 00:07: [io  0x0c52] has been reserved
[    0.850755] system 00:07: [io  0x0c6c] has been reserved
[    0.850759] system 00:07: [io  0x0c6f] has been reserved
[    0.850762] system 00:07: [io  0x0cd0-0x0cd1] has been reserved
[    0.850766] system 00:07: [io  0x0cd2-0x0cd3] has been reserved
[    0.850770] system 00:07: [io  0x0cd4-0x0cd5] has been reserved
[    0.850774] system 00:07: [io  0x0cd6-0x0cd7] has been reserved
[    0.850778] system 00:07: [io  0x0cd8-0x0cdf] has been reserved
[    0.850782] system 00:07: [io  0x0800-0x089f] could not be reserved
[    0.850786] system 00:07: [io  0x0b20-0x0b3f] has been reserved
[    0.850790] system 00:07: [io  0x0900-0x090f] has been reserved
[    0.850794] system 00:07: [io  0x0910-0x091f] has been reserved
[    0.850798] system 00:07: [io  0xfe00-0xfefe] has been reserved
[    0.850803] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.850808] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.850812] system 00:07: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.850817] system 00:07: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.850821] system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.850825] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.850831] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.852817] pnp: PnP ACPI: found 8 devices
[    0.861493] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.861521] pci 0000:00:02.1: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.861528] pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.861535] pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.861565] pci 0000:00:02.1: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.861570] pci 0000:00:02.1: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.861575] pci 0000:00:02.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.861579] pci 0000:00:02.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.861584] pci 0000:00:02.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.861588] pci 0000:00:02.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.861598] pci 0000:00:02.1: BAR 14: assigned [mem 0xd0900000-0xd0afffff]
[    0.861610] pci 0000:00:02.1: BAR 15: assigned [mem 0xd0b00000-0xd0cfffff 64bit pref]
[    0.861617] pci 0000:00:02.1: BAR 13: assigned [io  0x1000-0x1fff]
[    0.861623] pci 0000:00:02.1: PCI bridge to [bus 01]
[    0.861628] pci 0000:00:02.1:   bridge window [io  0x1000-0x1fff]
[    0.861635] pci 0000:00:02.1:   bridge window [mem 0xd0900000-0xd0afffff]
[    0.861641] pci 0000:00:02.1:   bridge window [mem 0xd0b00000-0xd0cfffff 64bit pref]
[    0.861648] pci 0000:00:02.2: PCI bridge to [bus 02]
[    0.861653] pci 0000:00:02.2:   bridge window [io  0xe000-0xefff]
[    0.861659] pci 0000:00:02.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.861668] pci 0000:00:02.3: PCI bridge to [bus 03]
[    0.861673] pci 0000:00:02.3:   bridge window [io  0xd000-0xdfff]
[    0.861679] pci 0000:00:02.3:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.861688] pci 0000:00:02.5: PCI bridge to [bus 04]
[    0.861694] pci 0000:00:02.5:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.861706] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.861710] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.861714] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.861717] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.861721] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.861725] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.861729] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.861733] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.861736] pci_bus 0000:01: resource 1 [mem 0xd0900000-0xd0afffff]
[    0.861740] pci_bus 0000:01: resource 2 [mem 0xd0b00000-0xd0cfffff 64bit pref]
[    0.861744] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.861747] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.861751] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.861754] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.861758] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
[    0.861819] NET: Registered protocol family 2
[    0.862159] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.862441] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.862757] TCP: Hash tables configured (established 65536 bind 65536)
[    0.862829] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.862887] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.863047] NET: Registered protocol family 1
[    0.863083] pci 0000:00:01.0: Video device with shadowed ROM
[    0.900410] PCI: CLS 64 bytes, default 64
[    0.900565] Trying to unpack rootfs image as initramfs...
[    1.946534] Freeing initrd memory: 37044K (ffff880033796000 - ffff880035bc3000)
[    1.946619] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.946625] software IO TLB [mem 0x76728000-0x7a728000] (64MB) mapped at [ffff880076728000-ffff88007a727fff]
[    1.946726] perf: AMD NB counters detected
[    1.946731] perf: AMD L2I counters detected
[    1.946801] LVT offset 0 assigned for vector 0x400
[    1.946837] perf: AMD IBS detected (0x000000ff)
[    1.947009] Scanning for low memory corruption every 60 seconds
[    1.947755] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.947811] audit: initializing netlink subsys (disabled)
[    1.947881] audit: type=2000 audit(1488996181.820:1): initialized
[    1.948520] Initialise system trusted keyring
[    1.948776] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    1.948779] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.951766] zbud: loaded
[    1.952113] VFS: Disk quotas dquot_6.6.0
[    1.952179] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.952713] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.953247] fuse init (API version 7.23)
[    1.953507] Key type big_key registered
[    1.953533] Allocating IMA MOK and blacklist keyrings.
[    1.954439] Key type asymmetric registered
[    1.954445] Asymmetric key parser 'x509' registered
[    1.954526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.954591] io scheduler noop registered
[    1.954596] io scheduler deadline registered (default)
[    1.954658] io scheduler cfq registered
[    1.955523] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.955551] pciehp 0000:00:02.1:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
[    1.955628] pciehp 0000:00:02.1:pcie04: service driver pciehp loaded
[    1.955639] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.955708] efifb: probing for efifb
[    1.955738] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 1984k, total 1984k
[    1.955741] efifb: mode is 800x600x32, linelength=3328, pages=1
[    1.955742] efifb: scrolling: redraw
[    1.955746] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.955920] Console: switching to colour frame buffer device 100x37
[    1.955944] fb0: EFI VGA frame buffer device
[    2.012599] ACPI: AC Adapter [ACAD] (on-line)
[    2.012748] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.012756] ACPI: Power Button [PWRB]
[    2.012836] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    2.013137] ACPI: Lid Switch [LID]
[    2.013213] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.013218] ACPI: Power Button [PWRF]
[    2.013322] ACPI: acpi_idle registered with cpuidle
[    2.016950] thermal LNXTHERM:00: registered as thermal_zone0
[    2.016954] ACPI: Thermal Zone [THRM] (51 C)
[    2.017010] GHES: HEST is not enabled!
[    2.017288] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.020740] Linux agpgart interface v0.103
[    2.026725] brd: module loaded
[    2.029198] loop: module loaded
[    2.029646] libphy: Fixed MDIO Bus: probed
[    2.029652] tun: Universal TUN/TAP device driver, 1.6
[    2.029655] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.029759] PPP generic driver version 2.4.2
[    2.029886] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.029895] ehci-pci: EHCI PCI platform driver
[    2.030109] ehci-pci 0000:00:12.0: EHCI Host Controller
[    2.030121] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[    2.030129] ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.030141] ehci-pci 0000:00:12.0: debug port 2
[    2.030198] ehci-pci 0000:00:12.0: irq 18, io mem 0xfea6d000
[    2.039912] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[    2.040018] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.040023] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.040027] usb usb1: Product: EHCI Host Controller
[    2.040031] usb usb1: Manufacturer: Linux 4.4.0-66-generic ehci_hcd
[    2.040034] usb usb1: SerialNumber: 0000:00:12.0
[    2.040166] ACPI: Battery Slot [BAT0] (battery present)
[    2.040295] hub 1-0:1.0: USB hub found
[    2.040310] hub 1-0:1.0: 2 ports detected
[    2.040626] ehci-pci 0000:00:13.0: EHCI Host Controller
[    2.040637] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[    2.040645] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.040656] ehci-pci 0000:00:13.0: debug port 2
[    2.040695] ehci-pci 0000:00:13.0: irq 18, io mem 0xfea6c000
[    2.051986] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
[    2.052100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.052105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.052109] usb usb2: Product: EHCI Host Controller
[    2.052112] usb usb2: Manufacturer: Linux 4.4.0-66-generic ehci_hcd
[    2.052116] usb usb2: SerialNumber: 0000:00:13.0
[    2.052414] hub 2-0:1.0: USB hub found
[    2.052432] hub 2-0:1.0: 2 ports detected
[    2.052657] ehci-platform: EHCI generic platform driver
[    2.052695] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.052705] ohci-pci: OHCI PCI platform driver
[    2.052731] ohci-platform: OHCI generic platform driver
[    2.052750] uhci_hcd: USB Universal Host Controller Interface driver
[    2.052966] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    2.052978] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[    2.053185] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
[    2.053423] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.053427] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.053430] usb usb3: Product: xHCI Host Controller
[    2.053434] usb usb3: Manufacturer: Linux 4.4.0-66-generic xhci-hcd
[    2.053437] usb usb3: SerialNumber: 0000:00:10.0
[    2.053643] hub 3-0:1.0: USB hub found
[    2.053658] hub 3-0:1.0: 2 ports detected
[    2.053807] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    2.053813] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[    2.056571] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.056611] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.056614] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.056618] usb usb4: Product: xHCI Host Controller
[    2.056621] usb usb4: Manufacturer: Linux 4.4.0-66-generic xhci-hcd
[    2.056624] usb usb4: SerialNumber: 0000:00:10.0
[    2.056825] hub 4-0:1.0: USB hub found
[    2.056840] hub 4-0:1.0: 2 ports detected
[    2.057076] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.063600] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.063609] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.063901] mousedev: PS/2 mouse device common for all mice
[    2.064250] rtc_cmos 00:03: RTC can wake from S4
[    2.064402] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.064432] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.064447] i2c /dev entries driver
[    2.064546] device-mapper: uevent: version 1.0.3
[    2.064679] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.064718] ledtrig-cpu: registered to indicate activity on CPUs
[    2.064725] EFI Variables Facility v0.08 2004-May-17
[    2.069680] NET: Registered protocol family 10
[    2.070009] NET: Registered protocol family 17
[    2.070042] Key type dns_resolver registered
[    2.070472] microcode: CPU0: patch_level=0x07030105
[    2.070487] microcode: CPU1: patch_level=0x07030105
[    2.070516] microcode: CPU2: patch_level=0x07030105
[    2.070545] microcode: CPU3: patch_level=0x07030105
[    2.070645] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.070953] registered taskstats version 1
[    2.070982] Loading compiled-in X.509 certificates
[    2.072707] Loaded X.509 cert 'Build time autogenerated kernel key: 32ca4feee90b5cde51f5f8c0e024b22f8c679982'
[    2.072743] zswap: loaded using pool lzo/zbud
[    2.074569] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.076844] Key type trusted registered
[    2.083760] Key type encrypted registered
[    2.083776] AppArmor: AppArmor sha1 policy hashing enabled
[    2.083783] ima: No TPM chip found, activating TPM-bypass!
[    2.083825] evm: HMAC attrs: 0x1
[    2.084578]   Magic number: 9:5:89
[    2.084583]   hash matches /build/linux-9yOF0g/linux-4.4.0/drivers/base/power/main.c:611
[    2.084790] rtc_cmos 00:03: setting system clock to 2017-03-08 18:03:03 UTC (1488996183)
[    2.085036] acpi-cpufreq: overriding BIOS provided _PSD data
[    2.085355] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.085358] EDD information not available.
[    2.085505] PM: Hibernation image not present or could not be loaded.
[    2.088465] Freeing unused kernel memory: 1488K (ffffffff81f45000 - ffffffff820b9000)
[    2.088471] Write protecting the kernel read-only data: 14336k
[    2.089662] Freeing unused kernel memory: 1776K (ffff880001844000 - ffff880001a00000)
[    2.090317] Freeing unused kernel memory: 116K (ffff880001de3000 - ffff880001e00000)
[    2.108703] random: systemd-udevd: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
[    2.108874] random: systemd-udevd: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
[    2.108912] random: systemd-udevd: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
[    2.109973] random: udevadm: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
[    2.110090] random: udevadm: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
[    2.110730] random: udevadm: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
[    2.110868] random: udevadm: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
[    2.111003] random: udevadm: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
[    2.111135] random: udevadm: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
[    2.111275] random: udevadm: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
[    2.322181] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.322243] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    2.322604] acpi device:01: registered as cooling_device4
[    2.322733] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    2.322819] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    2.343307] wmi: Mapper loaded
[    2.349352] rtsx_pci 0000:04:00.0: enabling device (0000 -> 0002)
[    2.349545] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 34
[    2.351405] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.351438] r8169 0000:03:00.0: enabling device (0000 -> 0003)
[    2.351849] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.352068] r8169 0000:03:00.0 eth0: RTL8106e at 0xffffc90000cba000, a0:2b:b8:54:4d:2e, XID 04900000 IRQ 36
[    2.355223] [drm] Initialized drm 1.1.0 20060810
[    2.356322] ahci 0000:00:11.0: version 3.0
[    2.356604] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.356611] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    2.363858] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.363893] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[    2.415200] scsi host0: ahci
[    2.415417] scsi host1: ahci
[    2.415517] ata1: SATA max UDMA/133 abar m1024@0xfea6e000 port 0xfea6e100 irq 37
[    2.415522] ata2: SATA max UDMA/133 abar m1024@0xfea6e000 port 0xfea6e180 irq 37
[    2.421024] [drm] radeon kernel modesetting enabled.
[    2.425783] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.425789] AMD IOMMUv2 functionality not available on this system
[    2.431785] CRAT table not found
[    2.431790] Finished initializing topology ret=0
[    2.432022] kfd kfd: Initialized module
[    2.432412] checking generic (c0000000 1f0000) vs hw (c0000000 10000000)
[    2.432416] fb: switching to radeondrmfb from EFI VGA
[    2.432470] Console: switching to colour dummy device 80x25
[    2.433123] [drm] initializing kernel modesetting (MULLINS 0x1002:0x9850 0x103C:0x2268).
[    2.433146] [drm] register mmio base: 0xFEA00000
[    2.433149] [drm] register mmio size: 262144
[    2.433156] [drm] doorbell mmio base: 0xD0000000
[    2.433158] [drm] doorbell mmio size: 8388608
[    2.433167] [drm] ACPI VFCT contains a BIOS for 00:01.0 1002:9850, size 60416
[    2.433204] ATOM BIOS: AMD
[    2.433342] radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    2.433347] radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[    2.433351] [drm] Detected VRAM RAM=1024M, BAR=256M
[    2.433353] [drm] RAM width 128bits DDR
[    2.433461] [TTM] Zone  kernel: Available graphics memory: 2506394 kiB
[    2.433464] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.433467] [TTM] Initializing pool allocator
[    2.433482] [TTM] Initializing DMA pool allocator
[    2.433523] [drm] radeon: 1024M of VRAM memory ready
[    2.433526] [drm] radeon: 2048M of GTT memory ready.
[    2.433555] [drm] Loading mullins Microcode
[    2.433754] [drm] Internal thermal controller without fan control
[    2.435069] [drm] radeon: dpm initialized
[    2.435093] r8169 0000:03:00.0 eno1: renamed from eth0
[    2.437592] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[    2.438030] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    2.468869] [drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
[    2.469093] radeon 0000:00:01.0: WB enabled
[    2.469114] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b3559c00
[    2.469118] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8801b3559c04
[    2.469123] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8801b3559c08
[    2.469127] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b3559c0c
[    2.469131] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff8801b3559c10
[    2.469657] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90001436c98
[    2.469890] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff8801b3559c18
[    2.469894] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff8801b3559c1c
[    2.469899] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.469901] [drm] Driver supports precise vblank timestamp query.
[    2.469959] radeon 0000:00:01.0: radeon: using MSI.
[    2.469998] [drm] radeon: irq initialized.
[    2.474141] [drm] ring test on 0 succeeded in 3 usecs
[    2.474238] [drm] ring test on 1 succeeded in 2 usecs
[    2.474259] [drm] ring test on 2 succeeded in 2 usecs
[    2.474478] [drm] ring test on 3 succeeded in 4 usecs
[    2.474487] [drm] ring test on 4 succeeded in 4 usecs
[    2.484284] usb 1-1: New USB device found, idVendor=0438, idProduct=7900
[    2.484289] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.484689] hub 1-1:1.0: USB hub found
[    2.484750] hub 1-1:1.0: 4 ports detected
[    2.496256] usb 2-1: New USB device found, idVendor=0438, idProduct=7900
[    2.496262] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.496565] hub 2-1:1.0: USB hub found
[    2.496616] hub 2-1:1.0: 4 ports detected
[    2.500341] [drm] ring test on 5 succeeded in 2 usecs
[    2.500371] [drm] UVD initialized successfully.
[    2.532556] usb 3-2: New USB device found, idVendor=04f9, idProduct=0202
[    2.532560] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.532564] usb 3-2: Product: DCP-387C
[    2.532568] usb 3-2: Manufacturer: Brother
[    2.532571] usb 3-2: SerialNumber: BROA0F259701
[    2.532784] usb 3-2: ep 0x85 - rounding interval to 512 microframes, ep desc says 800 microframes
[    2.542803] usb-storage 3-2:1.2: USB Mass Storage device detected
[    2.543000] scsi host2: usb-storage 3-2:1.2
[    2.543143] usbcore: registered new interface driver usb-storage
[    2.545670] usbcore: registered new interface driver uas
[    2.609609] [drm] ring test on 6 succeeded in 9 usecs
[    2.609621] [drm] ring test on 7 succeeded in 2 usecs
[    2.609622] [drm] VCE initialized successfully.
[    2.612686] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.767938] usb 2-1.2: new high-speed USB device number 3 using ehci-pci
[    2.771917] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[    2.885169] usb 1-1.1: New USB device found, idVendor=1d57, idProduct=0001
[    2.885177] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.885181] usb 1-1.1: Product: 2.4G Mouse
[    2.885184] usb 1-1.1: Manufacturer: 2.4G KB
[    2.893070] hidraw: raw HID events driver (C) Jiri Kosina
[    2.903845] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.903879] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.904786] usbcore: registered new interface driver usbhid
[    2.904789] usbhid: USB HID core driver
[    2.908063] input: 2.4G KB 2.4G Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1D57:0001.0001/input/input7
[    2.908138] ata2.00: ATAPI: hp       DVDRW  SU208FB, HH01, max UDMA/100
[    2.909946] ata1.00: ATA-9: ST750LM022 HN-M750MBB, 2BA30001, max UDMA/133
[    2.909950] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.910778] ata2.00: configured for UDMA/100
[    2.916075] ata1.00: configured for UDMA/133
[    2.916361] scsi 0:0:0:0: Direct-Access     ATA      ST750LM022 HN-M7 0001 PQ: 0 ANSI: 5
[    2.916749] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[    2.916755] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.916820] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.916885] sd 0:0:0:0: [sda] Write Protect is off
[    2.916891] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.916951] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.918884] scsi 1:0:0:0: CD-ROM            hp       DVDRW  SU208FB   HH01 PQ: 0 ANSI: 5
[    2.930916] usb 2-1.2: New USB device found, idVendor=05c8, idProduct=036e
[    2.930925] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.930929] usb 2-1.2: Product: HP Truevision HD
[    2.930933] usb 2-1.2: Manufacturer: SunplusIT INC.
[    2.943884] tsc: Refined TSC clocksource calibration: 1796.630 MHz
[    2.943893] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e5ba04a27, max_idle_ns: 440795248952 ns
[    2.946312] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.946321] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.946669] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.946824] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.964200] hid-generic 0003:1D57:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G KB 2.4G Mouse] on usb-0000:00:12.0-1.1/input0
[    2.964772] input: 2.4G KB 2.4G Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1D57:0001.0002/input/input8
[    2.971826]  sda: sda1 sda2 sda3
[    2.972638] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.975803] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    3.020299] hid-generic 0003:1D57:0001.0002: input,hidraw1: USB HID v1.10 Mouse [2.4G KB 2.4G Mouse] on usb-0000:00:12.0-1.1/input1
[    3.087374] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=b001
[    3.087382] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.087386] usb 1-1.3: Product: Bluetooth Radio 
[    3.087390] usb 1-1.3: Manufacturer: Realtek 
[    3.087393] usb 1-1.3: SerialNumber: 00e04c000001
[    3.111873] [drm] ib test on ring 1 succeeded in 0 usecs
[    3.112399] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4712]
[    3.142449] psmouse serio1: synaptics: queried min coordinates: x [1326..], y [1200..]
[    3.201826] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x126800/0x0, board id: 2997, fw id: 1627552
[    3.239956] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    3.557169] scsi 2:0:0:0: Direct-Access     Brother  DCP-387C         1.00 PQ: 0 ANSI: 2
[    3.557852] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    3.611901] [drm] ib test on ring 2 succeeded in 0 usecs
[    3.611983] [drm] ib test on ring 3 succeeded in 0 usecs
[    3.612039] [drm] ib test on ring 4 succeeded in 0 usecs
[    3.617350] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    3.943963] clocksource: Switched to clocksource tsc
[    4.111893] [drm] ib test on ring 5 succeeded
[    4.112543] [drm] ib test on ring 6 succeeded
[    4.112993] [drm] ib test on ring 7 succeeded
[    4.117275] [drm] radeon atom DIG backlight initialized
[    4.117280] [drm] Radeon Display Connectors
[    4.117282] [drm] Connector 0:
[    4.117284] [drm]   eDP-1
[    4.117286] [drm]   HPD1
[    4.117290] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    4.117292] [drm]   Encoders:
[    4.117294] [drm]     LCD1: INTERNAL_UNIPHY
[    4.117295] [drm] Connector 1:
[    4.117297] [drm]   HDMI-A-1
[    4.117299] [drm]   HPD2
[    4.117301] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    4.117303] [drm]   Encoders:
[    4.117305] [drm]     DFP1: INTERNAL_UNIPHY
[    4.831413] [drm] fb mappable at 0xC0728000
[    4.831419] [drm] vram apper at 0xC0000000
[    4.831421] [drm] size 8294400
[    4.831423] [drm] fb depth is 24
[    4.831425] [drm]    pitch is 7680
[    4.831656] fbcon: radeondrmfb (fb0) is primary device
[    4.831794] Console: switching to colour frame buffer device 170x48
[    4.831838] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    4.908597] [drm] Initialized radeon 2.43.0 20080528 for 0000:00:01.0 on minor 0
[    5.073697] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    5.204887] random: nonblocking pool is initialized
[    6.450723] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    6.451079] systemd[1]: Detected architecture x86-64.
[    6.468832] systemd[1]: Set hostname to <benoit>.
[    8.621181] systemd[1]: Reached target Encrypted Volumes.
[    8.621383] systemd[1]: Listening on Syslog Socket.
[    8.621578] systemd[1]: Created slice User and Session Slice.
[    8.621858] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.621942] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.622033] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.622090] systemd[1]: Listening on udev Kernel Socket.
[    8.622116] systemd[1]: Reached target User and Group Name Lookups.
[    8.622171] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.622244] systemd[1]: Listening on udev Control Socket.
[    8.622377] systemd[1]: Listening on Journal Audit Socket.
[    8.622440] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.622589] systemd[1]: Created slice System Slice.
[    8.622628] systemd[1]: Reached target Slices.
[    8.622786] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    8.622876] systemd[1]: Listening on Journal Socket.
[    8.635752] systemd[1]: Starting Journal Service...
[    8.636829] systemd[1]: Mounting Huge Pages File System...
[    8.637860] systemd[1]: Starting Uncomplicated firewall...
[    8.639036] systemd[1]: Mounting POSIX Message Queue File System...
[    8.735711] systemd[1]: Starting Load Kernel Modules...
[    8.736792] systemd[1]: Started Braille Device Support.
[    8.738198] systemd[1]: Starting Set console keymap...
[    8.739411] systemd[1]: Started Read required files in advance.
[    8.740670] systemd[1]: Mounting Debug File System...
[    8.741842] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    9.000660] systemd[1]: Reached target Remote File Systems (Pre).
[    9.000719] systemd[1]: Reached target Remote File Systems.
[    9.014603] systemd[1]: Started Uncomplicated firewall.
[    9.160231] systemd[1]: Mounted Debug File System.
[    9.160318] systemd[1]: Mounted Huge Pages File System.
[    9.160358] systemd[1]: Mounted POSIX Message Queue File System.
[    9.176064] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    9.187783] systemd[1]: Starting Create Static Device Nodes in /dev...
[    9.766927] lp: driver loaded but no devices found
[    9.795863] ppdev: user-space parallel port driver
[    9.907773] systemd[1]: Started Load Kernel Modules.
[    9.939589] systemd[1]: Mounting FUSE Control File System...
[    9.940632] systemd[1]: Starting Apply Kernel Variables...
[    9.944914] systemd[1]: Mounted FUSE Control File System.
[   10.228980] systemd[1]: Started Journal Service.
[   14.669007] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   14.973072] systemd-journald[239]: Received request to flush runtime journal from PID 1
[   15.474364] Initializing HPQ6001 module
[   15.474497] input: HP Wireless hotkeys as /devices/virtual/input/input9
[   15.647404] hp_accel: laptop model unknown, using default axes configuration
[   15.659532] lis3lv02d: 8 bits 3DC sensor found
[   15.706850] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
[   15.845902] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.851976] ccp 0000:00:08.0: 4 command queues available
[   15.852266] ccp 0000:00:08.0: enabled
[   15.890473] EDAC MC: Ver: 3.0.0
[   16.027153] MCE: In-kernel MCE decoding enabled.
[   16.144817] AMD64 EDAC driver v3.4.0
[   16.144852] EDAC amd64: DRAM ECC disabled.
[   16.144864] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   16.197967] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   16.198152] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[   16.997333] AVX version of gcm_enc/dec engaged.
[   16.997340] AES CTR mode by8 optimization enabled
[   17.017487] snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002)
[   17.017656] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[   17.055015] snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
[   17.055729] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11
[   17.070766] snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
[   17.264204] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   17.264214] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   17.264218] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   17.264222] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   17.264225] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   17.264230] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x19
[   17.264234] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[   17.370714] snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
[   17.480570] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[   17.480703] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[   17.573110] Bluetooth: Core ver 2.21
[   17.573145] NET: Registered protocol family 31
[   17.573147] Bluetooth: HCI device and connection manager initialized
[   17.573155] Bluetooth: HCI socket layer initialized
[   17.573160] Bluetooth: L2CAP socket layer initialized
[   17.573170] Bluetooth: SCO socket layer initialized
[   17.670691] snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
[   17.940432] usblp 3-2:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0202
[   17.940508] usbcore: registered new interface driver usblp
[   17.970636] snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
[   18.000934] usbcore: registered new interface driver btusb
[   18.002181] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[   18.002187] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[   18.270624] snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
[   18.296334] rtl8723be 0000:02:00.0: enabling device (0000 -> 0003)
[   18.321391] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[   18.395411] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   18.395894] rtlwifi: rtlwifi: wireless switch is on
[   18.444357] kvm: disabled by bios
[   18.467527] kvm: disabled by bios
[   18.491583] kvm: disabled by bios
[   18.519413] kvm: disabled by bios
[   18.570601] snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
[   18.767055] Bluetooth: hci0: rom_version status=0 version=1
[   18.870477] snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
[   19.170556] snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
[   19.211342] media: Linux media interface: v0.10
[   19.289168] Linux video capture interface: v2.00
[   19.470459] snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
[   19.713104] uvcvideo: Found UVC 1.00 device HP Truevision HD (05c8:036e)
[   19.722338] input: HP Truevision HD as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input14
[   19.722967] usbcore: registered new interface driver uvcvideo
[   19.722974] USB Video Class driver (1.1.1)
[   20.350085] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[   20.350098] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff8801b90abf78), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   20.350115] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff8801b90ae550), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   20.350201] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[   20.350208] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff8801b90abf78), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   20.350221] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff8801b90ae550), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   20.350356] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[   20.350363] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff8801b90abf78), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   20.350376] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff8801b90ae550), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   20.350486] input: HP WMI hotkeys as /devices/virtual/input/input15
[   20.350769] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[   20.350777] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff8801b90abf78), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   20.350790] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff8801b90ae550), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   20.350874] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[   20.350881] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff8801b90abf78), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   20.350893] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff8801b90ae550), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   20.643280] rtl8723be 0000:02:00.0 wlo1: renamed from wlan0
[   21.998227] cfg80211: World regulatory domain updated:
[   21.998239] cfg80211:  DFS Master region: unset
[   21.998242] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   21.998247] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   21.998251] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   21.998255] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   21.998260] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   21.998265] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   21.998269] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   21.998272] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   21.998276] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   23.075395] Adding 5176316k swap on /dev/sda3.  Priority:-1 extents:1 across:5176316k FS
[   32.219143] audit: type=1400 audit(1488996213.631:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=930 comm="apparmor_parser"
[   32.222398] audit: type=1400 audit(1488996213.635:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=927 comm="apparmor_parser"
[   32.222417] audit: type=1400 audit(1488996213.635:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=927 comm="apparmor_parser"
[   32.222429] audit: type=1400 audit(1488996213.635:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=927 comm="apparmor_parser"
[   32.222440] audit: type=1400 audit(1488996213.635:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=927 comm="apparmor_parser"
[   32.223504] audit: type=1400 audit(1488996213.635:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=926 comm="apparmor_parser"
[   32.223522] audit: type=1400 audit(1488996213.635:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=926 comm="apparmor_parser"
[   32.226088] audit: type=1400 audit(1488996213.639:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=932 comm="apparmor_parser"
[   32.226110] audit: type=1400 audit(1488996213.639:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=932 comm="apparmor_parser"
[   32.228952] audit: type=1400 audit(1488996213.639:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=934 comm="apparmor_parser"
[   32.988828] cgroup: new mount options do not match the existing superblock, will be ignored
[   34.648617] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   34.648625] Bluetooth: BNEP filters: protocol multicast
[   34.648634] Bluetooth: BNEP socket layer initialized
[   40.042681] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   40.611827] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   40.621777] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   40.925836] r8169 0000:03:00.0 eno1: link down
[   40.925925] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   42.278574] usblp0: removed
[   42.312533] usblp 3-2:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0202
[   42.645510] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   46.464964] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   46.475609] vboxdrv: Found 4 processor cores
[   46.496582] vboxdrv: TSC mode is Invariant, tentative frequency 1796617191 Hz
[   46.496588] vboxdrv: Successfully loaded version 5.0.32_Ubuntu (interface 0x00240000)
[   46.508487] VBoxNetFlt: Successfully started.
[   46.518364] VBoxNetAdp: Successfully started.
[   46.528465] VBoxPciLinuxInit
[   46.533107] vboxpci: IOMMU not found (not registered)
[   52.793041] Bluetooth: RFCOMM TTY layer initialized
[   52.793057] Bluetooth: RFCOMM socket layer initialized
[   52.793068] Bluetooth: RFCOMM ver 1.11
[   76.726699] wlo1: authenticate with 72:0b:95:89:af:30
[   76.748056] wlo1: send auth to 72:0b:95:89:af:30 (try 1/3)
[   76.751056] wlo1: authenticated
[   76.753650] wlo1: associate with 72:0b:95:89:af:30 (try 1/3)
[   76.764274] wlo1: RX AssocResp from 72:0b:95:89:af:30 (capab=0x411 status=0 aid=3)
[   76.765508] wlo1: associated
[   76.765571] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[  608.871259] usblp0: removed
[  642.173076] usblp 3-2:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0202
[ 1117.135668] usblp0: removed
[ 1172.183281] usblp 3-2:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0202
[ 1315.635372] usblp0: removed
[ 1368.938856] usblp 3-2:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0202
[ 1431.143268] usblp0: removed
[ 1479.947343] usblp 3-2:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0202
[ 1725.294036] wlo1: deauthenticated from 72:0b:95:89:af:30 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA)
[ 1725.345545] wlo1: authenticate with 72:0b:95:89:af:30
[ 1725.357494] wlo1: send auth to 72:0b:95:89:af:30 (try 1/3)
[ 1725.358520] cfg80211: World regulatory domain updated:
[ 1725.358526] cfg80211:  DFS Master region: unset
[ 1725.358529] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1725.358534] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1725.358539] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1725.358542] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 1725.358547] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 1725.358551] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 1725.358555] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 1725.358559] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 1725.358562] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 1725.360952] wlo1: authenticated
[ 1725.364301] wlo1: associate with 72:0b:95:89:af:30 (try 1/3)
[ 1725.374613] wlo1: RX AssocResp from 72:0b:95:89:af:30 (capab=0x411 status=0 aid=1)
[ 1725.376589] wlo1: associated
[ 9613.062052] usblp0: removed
[ 9639.106934] usblp 3-2:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0202
[ 9698.863998] usblp0: removed
[ 9720.666064] usblp 3-2:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0202
[ 9733.776796] usblp0: removed
[ 9757.824833] usblp 3-2:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0202
benoit@benoit:~$ 
  

Lepetit j'avais essayé au post 20 mais ça s'etait soldé par un echec ... Penses-tu que je doive réessayer ?

Dernière modification par devy1 (Le 08/03/2017, à 22:16)

Hors ligne

#50 Le 08/03/2017, à 23:25

Bougron

Re : Installation SSD pour Ubuntu

Pour la trace, il n'y a rien de bien anormal.
Pour le smartctl, j'ai oublié de te dire qu'il fallait faire le paragraphe 2.1 avant la commande


Ubuntu  BASH 16.04.1 sous windows 10
Lubuntu 14.04.4 en 32 bits pour un vaio pcg-k215s
Ubuntu 16.04.2 avec le noyau 4.4.0-64 et  avec le noyau 4.8.0.36
Un site que les débutants en ubuntu doivent consulter  http://ubuntu.i17.fr/

Hors ligne