[Résolu]Carte son NVIDIA Corporation Hight Definition Audio Controller

Ch@rly · Le 04/03/2017, à 16:28

Bonjour à tous, étant néophyte sous linux, je me lance sur le forum.
Voila mon petit souci : mon ordinateur fonctionnant sous ubuntu 16.04 LTS n'émet pas de son en 5.1.
Voici le résultat de la commande aplay -l :

charles@principal:~$ aplay -l
**** Liste des Périphériques Matériels PLAYBACK ****
carte 0: PCH [HDA Intel PCH], périphérique 0: ALC887-VD Analog [ALC887-VD Analog]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: PCH [HDA Intel PCH], périphérique 1: ALC887-VD Digital [ALC887-VD Digital]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 1: NVidia [HDA NVidia], périphérique 3: HDMI 0 [HDMI 0]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 1: NVidia [HDA NVidia], périphérique 7: HDMI 0 [HDMI 0]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 1: NVidia [HDA NVidia], périphérique 8: HDMI 0 [HDMI 0]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 1: NVidia [HDA NVidia], périphérique 9: HDMI 0 [HDMI 0]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0

Voici le résultat de la commande lspci -v

charles@principal:~$ lspci -v
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
	Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller
	Flags: bus master, fast devsel, latency 0
	Capabilities: <access denied>
	Kernel driver in use: ivb_uncore
	Kernel modules: ie31200_edac

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 24
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: f6000000-f70fffff
	Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
	Subsystem: ASUSTeK Computer Inc. P8 series motherboard
	Flags: bus master, fast devsel, latency 0, IRQ 27
	Memory at f7109000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. P8 series motherboard
	Flags: bus master, medium devsel, latency 0, IRQ 23
	Memory at f7107000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
	Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family High Definition Audio Controller
	Flags: bus master, fast devsel, latency 0, IRQ 28
	Memory at f7100000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 18
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. P8 series motherboard
	Flags: bus master, medium devsel, latency 0, IRQ 23
	Memory at f7106000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation H61 Express Chipset Family LPC Controller (rev 05)
	Subsystem: ASUSTeK Computer Inc. H61 Express Chipset Family LPC Controller
	Flags: bus master, medium devsel, latency 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
	I/O ports at f0d0 [size=8]
	I/O ports at f0c0 [size=4]
	I/O ports at f0b0 [size=8]
	I/O ports at f0a0 [size=4]
	I/O ports at f090 [size=16]
	I/O ports at f080 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix
	Kernel modules: pata_acpi

00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
	Subsystem: ASUSTeK Computer Inc. P8 series motherboard
	Flags: medium devsel, IRQ 11
	Memory at f7105000 (64-bit, non-prefetchable) [size=256]
	I/O ports at f000 [size=32]
	Kernel modules: i2c_i801

00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller (rev 05) (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
	I/O ports at f070 [size=8]
	I/O ports at f060 [size=4]
	I/O ports at f050 [size=8]
	I/O ports at f040 [size=4]
	I/O ports at f030 [size=16]
	I/O ports at f020 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix
	Kernel modules: pata_acpi

01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2) (prog-if 00 [VGA controller])
	Subsystem: eVga.com. Corp. GT218 [GeForce 210]
	Flags: bus master, fast devsel, latency 0, IRQ 26
	Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
	Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Memory at f0000000 (64-bit, prefetchable) [size=32M]
	I/O ports at e000 [size=128]
	Expansion ROM at f7000000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau
	Kernel modules: nvidiafb, nouveau

01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
	Subsystem: eVga.com. Corp. High Definition Audio Controller
	Flags: bus master, fast devsel, latency 0, IRQ 17
	Memory at f7080000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
	Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards
	Flags: bus master, fast devsel, latency 0, IRQ 25
	I/O ports at d000 [size=256]
	Memory at f2104000 (64-bit, prefetchable) [size=4K]
	Memory at f2100000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

Malheureusement, je crois que ma carte NVIDIA n'est pas reconnue

charles@principal:~$ cat /proc/asound/modules
 0 snd_hda_intel
 1 snd_hda_intel

Pourtant alsamixer reconnait bien les 5 HP et le caisson de basse, mais le son ne sort de que 2 HP (certes en stéréo).
Quelqu'un pourrait-il m'aider ?

Dernière modification par Ch@rly (Le 10/03/2017, à 17:20)

xubu1957 · Le 04/03/2017, à 16:46

Bonjour,

Tu avais regardé la Doc : pulseaudio ?

Tu avais installé : pavucontrol ?

Dernière modification par xubu1957 (Le 04/03/2017, à 16:47)

Ch@rly · Le 05/03/2017, à 02:00

Merci pour ta réponse, mais rien n'est simple.
J'ai effectivement changé la ligne pour indiquer qu'il y a 6 HP, mais lorsque je relance le demon :

charles@principal:~$ pulseaudio -k
charles@principal:~$ pulseaudio -D
E: [pulseaudio] main.c: Échec lors du démarrage du démon.

Une idée ?
Voici mon fichier de conf :

# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no

; high-priority = yes
; nice-level = -11

; realtime-scheduling = yes
; realtime-priority = 5

; exit-idle-time = 20
; scache-idle-time = 20

; dl-search-path = (depends on architecture)

; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa

; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0

; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = yes
; lfe-crossover-freq = 120

flat-volumes = no

; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000

; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 6
; default-channel-map = front-left,front-right

; default-fragments = 4
; default-fragment-size-msec = 25

; enable-deferred-volume = yes
deferred-volume-safety-margin-usec = 1
; deferred-volume-extra-delay-usec = 0

Et oui, pavucontrol est installé.

xubu1957 · Le 05/03/2017, à 08:07

Bonjour,

Et en lançant par le terminal :

pavucontrol

tu n'as pas moyen de gérer les sorties du son ?

(edit)

Tu avais aussi regardé, dans cette documentation : listes_d_ordinateurs_et_la_solution ?

Tu utilises quel noyau ?

uname -r

Dernière modification par xubu1957 (Le 05/03/2017, à 08:36)

Ch@rly · Le 05/03/2017, à 11:47

Bonjour,
En lançant pavucontrol, je vois les deux options, mais si je choisis High Definition Audio Controller Digital Stereo (HDMI) aucun son ne sort.
Quand à l'autre commande, voila le résultat :

visiteur@principal:~$ uname -r
4.4.0-64-generic

xubu1957 · Le 05/03/2017, à 12:27

Tu as une option Audio Interne dans le BIOS ?

comme dans cette discussion : [RESOLU]Pas de Son après installation d'une Nivida GTX 580: nvidia-331

Ch@rly · Le 10/03/2017, à 17:19

Bonjour,
je n'ai plus le temps pour l'instant de m'occuper de cette carte. Je marque donc le sujet comme résolu pour le moment et le ré-ouvrirai dès que j'aurai un moment
Merci pour ton aide.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 04/03/2017, à 16:28

[Résolu]Carte son NVIDIA Corporation Hight Definition Audio Controller

#2 Le 04/03/2017, à 16:46

Re : [Résolu]Carte son NVIDIA Corporation Hight Definition Audio Controller

#3 Le 05/03/2017, à 02:00

Re : [Résolu]Carte son NVIDIA Corporation Hight Definition Audio Controller

#4 Le 05/03/2017, à 08:07

Re : [Résolu]Carte son NVIDIA Corporation Hight Definition Audio Controller

#5 Le 05/03/2017, à 11:47

Re : [Résolu]Carte son NVIDIA Corporation Hight Definition Audio Controller

#6 Le 05/03/2017, à 12:27

Re : [Résolu]Carte son NVIDIA Corporation Hight Definition Audio Controller

#7 Le 10/03/2017, à 17:19

Re : [Résolu]Carte son NVIDIA Corporation Hight Definition Audio Controller

Pied de page des forums