#26 Le 29/03/2017, à 10:11
- philburgt
Re : [Résolu] Lenteur Ubuntu 16 04
Après modif et redémarrage les temps d'ouverture restent inchangés.
http://slexy.org/view/s20K9k5hSY
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos7)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disque /dev/sda : 465,8 GiB, 500107862016 octets, 976773168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 40,962,047 40,960,000 83 Linux
/dev/sda2 40,964,094 976,772,667 935,808,574 5 Extended
/dev/sda5 40,964,096 43,012,095 2,048,000 82 Linux swap / Solaris
/dev/sda6 43,014,144 915,333,119 872,318,976 83 Linux
/dev/sda7 915,335,168 976,772,667 61,437,500 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 bb66d2c2-7089-4561-a246-3b7dabef0457 ext4
/dev/sda5 ca1a9cde-d671-4509-8d61-89994b189713 swap
/dev/sda6 dc2d5104-516e-4324-ba88-c6c1552067f5 ext4
/dev/sda7 fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509 ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 mars 29 10:03 ata-HL-DT-ST_DVDRAM_GH22NS50_12A272C95198 -> ../../sr0
lrwxrwxrwx 1 root root 9 mars 29 10:03 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911 -> ../../sda
lrwxrwxrwx 1 root root 10 mars 29 10:03 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mars 29 10:03 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mars 29 10:03 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 mars 29 10:03 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 mars 29 10:03 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part7 -> ../../sda7
lrwxrwxrwx 1 root root 9 mars 29 10:03 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 mars 29 10:03 wwn-0x50014ee00178fe33 -> ../../sda
lrwxrwxrwx 1 root root 10 mars 29 10:03 wwn-0x50014ee00178fe33-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mars 29 10:03 wwn-0x50014ee00178fe33-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mars 29 10:03 wwn-0x50014ee00178fe33-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 mars 29 10:03 wwn-0x50014ee00178fe33-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 mars 29 10:03 wwn-0x50014ee00178fe33-part7 -> ../../sda7
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda7 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-bb66d2c2-7089-4561-a246-3b7dabef0457' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
linux /boot/vmlinuz-4.4.0-66-generic root=UUID=bb66d2c2-7089-4561-a246-3b7dabef0457 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-66-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=bb66d2c2-7089-4561-a246-3b7dabef0457 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda6 during installation
UUID=dc2d5104-516e-4324-ba88-c6c1552067f5 /home ext4 defaults 0 2
# swap was on /dev/sda5 during installation
UUID=ca1a9cde-d671-4509-8d61-89994b189713 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
1.344463348 = 1.443606528 boot/grub/grub.cfg 1
0.817115784 = 0.877371392 boot/grub/i386-pc/core.img 1
10.990798950 = 11.801280512 boot/vmlinuz-3.13.0-112-generic 1
1.406726837 = 1.510461440 boot/vmlinuz-4.4.0-66-generic 1
1.406726837 = 1.510461440 vmlinuz 1
10.990798950 = 11.801280512 vmlinuz.old 1
6.647541046 = 7.137742848 boot/initrd.img-3.13.0-112-generic 4
14.518726349 = 15.589363712 boot/initrd.img-4.4.0-66-generic 2
14.518726349 = 15.589363712 initrd.img 2
6.647541046 = 7.137742848 initrd.img.old 4
=========================== sda7/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
else
search --no-floppy --fs-uuid --set=root fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
else
search --no-floppy --fs-uuid --set=root fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
fi
linux /boot/vmlinuz-4.4.0-70-generic root=UUID=fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-70-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
else
search --no-floppy --fs-uuid --set=root fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
else
search --no-floppy --fs-uuid --set=root fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 16.04.2 LTS (16.04) (sur /dev/sda1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-bb66d2c2-7089-4561-a246-3b7dabef0457' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
linux /boot/vmlinuz-4.4.0-66-generic root=UUID=bb66d2c2-7089-4561-a246-3b7dabef0457 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-66-generic
}
--------------------------------------------------------------------------------
=============================== sda7/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda7 during installation
UUID=fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=ca1a9cde-d671-4509-8d61-89994b189713 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
438.617568970 = 470.962028544 boot/grub/grub.cfg 1
446.604515076 = 479.537946624 boot/grub/i386-pc/core.img 1
437.976287842 = 470.273458176 boot/vmlinuz-4.4.0-31-generic 1
441.361373901 = 473.908166656 boot/vmlinuz-4.4.0-70-generic 1
441.361373901 = 473.908166656 vmlinuz 1
437.976287842 = 470.273458176 vmlinuz.old 1
438.617443085 = 470.961893376 boot/initrd.img-4.4.0-31-generic 4
454.738945007 = 488.272224256 boot/initrd.img-4.4.0-70-generic 2
454.738945007 = 488.272224256 initrd.img 2
438.617443085 = 470.961893376 initrd.img.old 4
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 1c 00 00 00 c4 1f 06 00 78 91 aa ff 0e 00 00 00 |........x.......|
00000010 00 41 0e 10 4b 86 02 0d 06 00 00 00 00 00 00 00 |.A..K...........|
00000020 1c 00 00 00 e4 1f 06 00 68 91 aa ff 1b 00 00 00 |........h.......|
00000030 00 45 0e 10 43 86 02 0d 06 00 00 00 00 00 00 00 |.E..C...........|
00000040 1c 00 00 00 04 20 06 00 68 91 aa ff 38 00 00 00 |..... ..h...8...|
00000050 00 48 0e 10 45 86 02 0d 06 00 00 00 00 00 00 00 |.H..E...........|
00000060 1c 00 00 00 24 20 06 00 88 91 aa ff 14 00 00 00 |....$ ..........|
00000070 00 48 0e 10 43 86 02 0d 06 00 00 00 00 00 00 00 |.H..C...........|
00000080 1c 00 00 00 44 20 06 00 88 91 aa ff 82 00 00 00 |....D ..........|
00000090 00 41 0e 10 45 86 02 0d 06 4f 83 03 00 00 00 00 |.A..E....O......|
000000a0 1c 00 00 00 64 20 06 00 f8 91 aa ff 0b 00 00 00 |....d ..........|
000000b0 00 41 0e 10 48 86 02 0d 06 00 00 00 00 00 00 00 |.A..H...........|
000000c0 1c 00 00 00 84 20 06 00 78 a7 aa ff 1b 00 00 00 |..... ..x.......|
000000d0 00 41 0e 10 4f 86 02 0d 06 00 00 00 00 00 00 00 |.A..O...........|
000000e0 1c 00 00 00 a4 20 06 00 78 a7 aa ff 1b 00 00 00 |..... ..x.......|
000000f0 00 41 0e 10 4f 86 02 0d 06 00 00 00 00 00 00 00 |.A..O...........|
00000100 1c 00 00 00 c4 20 06 00 a8 91 aa ff 9d 00 00 00 |..... ..........|
00000110 00 41 0e 10 43 86 02 0d 06 56 8c 03 83 04 00 00 |.A..C....V......|
00000120 1c 00 00 00 e4 20 06 00 28 92 aa ff 8f 01 00 00 |..... ..(.......|
00000130 00 41 0e 10 4a 86 02 0d 06 49 83 04 8c 03 00 00 |.A..J....I......|
00000140 1c 00 00 00 04 21 06 00 98 93 aa ff 2f 01 00 00 |.....!....../...|
00000150 00 4f 0e 10 49 86 02 0d 06 00 00 00 00 00 00 00 |.O..I...........|
00000160 1c 00 00 00 24 21 06 00 a8 94 aa ff 7f 00 00 00 |....$!..........|
00000170 00 41 0e 10 43 86 02 0d 06 45 8c 03 41 83 04 00 |.A..C....E..A...|
00000180 24 00 00 00 44 21 06 00 08 95 aa ff ba 00 00 00 |$...D!..........|
00000190 00 41 0e 10 43 86 02 0d 06 45 8f 03 47 8d 05 8e |.A..C....E..G...|
000001a0 04 46 83 07 8c 06 00 00 24 00 00 00 6c 21 06 00 |.F......$...l!..|
000001b0 a0 95 aa ff df 04 00 00 00 41 0e 10 43 86 00 fe |.........A..C...|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 40 1f 00 00 fe |...........@....|
000001d0 ff ff 05 fe ff ff 02 40 1f 00 00 90 fe 33 00 00 |.......@.....3..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
==================================== inxi report: ==============================
System: Kernel: 4.4.0-70-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine: Device: desktop Mobo: ASUSTeK model: P5KPL/EPU v: Rev X.0x
BIOS: American Megatrends v: 0308 date: 03/11/2009
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Dual core Intel Core2 Duo E8400 (-MCP-) cache: 6144 KB bmips: 11988
clock speeds: min/max: 1998/2997 MHz 1: 1998 MHz 2: 2997 MHz
CPU Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov
constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts est flexpriority
fpu fxsr ht lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat
pbe pdcm pebs pge pni pse pse36 rep_good sep smx ss sse sse2 sse4_1
ssse3 syscall tm tm2 tpr_shadow tsc vme vmx vnmi xsave xtpr
Memory: Array-1 capacity: 8 GB (est) devices: 4 EC: None
max module size: 4 GB
Device-1: DIMM0 size: 2 GB (Double-bank) speed: 800 MHz type: DDR2
manufacturer: N/A part: N/A
Device-2: DIMM1 size: No Module Installed type: N/A
Device-3: DIMM2 size: 2 GB (Double-bank) speed: 800 MHz type: DDR2
manufacturer: N/A part: N/A
Device-4: DIMM3 size: No Module Installed type: N/A
Graphics: Card: NVIDIA G98 [GeForce 8400 GS Rev. 2]
bus-ID: 01:00.0 chip-ID: 10de:06e4
Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: modesetting,fbdev,vesa)
tty size: 1920x1080@60.00hz
GLX Renderer: Gallium 0.4 on NV98
GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
Audio: Card-1 Intel NM10/ICH7 Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:27d8
Card-2 Logitech Webcam C170
driver: USB Audio usb-ID: 001-004 chip-ID: 046d:082b
Sound: Advanced Linux Sound Architecture v: k4.4.0-70-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: e800
bus-ID: 02:00.0 chip-ID: 10ec:8168
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 500.1GB (2.5% used)
ID-1: /dev/sda model: WDC_WD5000AAKS size: 500.1GB
Optical: /dev/sr0 model: HL-DT-ST DVDRAM GH22NS50
rev: TN00 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 48x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 29G used: 11G (40%) fs: ext4 dev: /dev/sda7
label: N/A uuid: fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
ID-2: swap-1 size: 1.05GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
label: N/A uuid: ca1a9cde-d671-4509-8d61-89994b189713
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sda1 size: 20.97G
fs: ext4 label: N/A uuid: bb66d2c2-7089-4561-a246-3b7dabef0457
ID-2: /dev/sda6 size: 446.63G
fs: ext4 label: N/A uuid: dc2d5104-516e-4324-ba88-c6c1552067f5
ID-3: /dev/fd0 size: 0.00G label: N/A uuid: N/A
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://archive.ubuntu.com/ubuntu xenial main restricted
deb http://archive.ubuntu.com/ubuntu xenial-updates main restricted
deb http://archive.ubuntu.com/ubuntu xenial universe
deb http://archive.ubuntu.com/ubuntu xenial-updates universe
deb http://archive.ubuntu.com/ubuntu xenial multiverse
deb http://archive.ubuntu.com/ubuntu xenial-updates multiverse
deb http://archive.ubuntu.com/ubuntu xenial-backports main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu xenial-security main restricted
deb http://archive.ubuntu.com/ubuntu xenial-security universe
deb http://archive.ubuntu.com/ubuntu xenial-security multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 7.5% command: firefox pid: 1677 mem: 295.42MB (8.4%)
2: cpu: 5.3% command: plugin-container pid: 1832 mem: 170.93MB (4.8%)
3: cpu: 4.8% command: Xorg pid: 896 mem: 68.28MB (1.9%)
4: cpu: 2.3% command: compiz pid: 1308 mem: 107.20MB (3.0%)
5: cpu: 1.3% command: gnome-software pid: 1475 mem: 86.88MB (2.4%)
6: cpu: 0.4% command: bash pid: 2210 mem: 4.41MB (0.1%)
7: cpu: 0.4% command: gnome-terminal-server pid: 1942 mem: 34.49MB (0.9%)
8: cpu: 0.3% command: fwupd pid: 1569 mem: 31.41MB (0.8%)
9: cpu: 0.3% command: init pid: 1 mem: 5.68MB (0.1%)
10: cpu: 0.2% command: nautilus pid: 1490 mem: 54.45MB (1.5%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 295.42MB (8.4%) command: firefox pid: 1677 cpu: 7.5%
2: mem: 170.93MB (4.8%) command: plugin-container pid: 1832 cpu: 5.3%
3: mem: 107.20MB (3.0%) command: compiz pid: 1308 cpu: 2.3%
4: mem: 86.88MB (2.4%) command: gnome-software pid: 1475 cpu: 1.3%
5: mem: 68.28MB (1.9%) command: Xorg pid: 896 cpu: 4.8%
6: mem: 60.15MB (1.7%) command: evolution-calendar-factory pid: 1573 cpu: 0.0%
7: mem: 54.45MB (1.5%) command: nautilus pid: 1490 cpu: 0.2%
8: mem: 51.41MB (1.4%) command: unity-settings-daemon pid: 1274 cpu: 0.1%
9: mem: 50.45MB (1.4%) command: unity-panel-service pid: 1286 cpu: 0.1%
10: mem: 49.41MB (1.4%) command: ibus-ui-gtk3 pid: 1243 cpu: 0.1%
Info: Processes: 200 Uptime: 4 min Memory: 825.6/3511.6MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8
=================================== rfkill: ===================================
=================================== lsusb: ====================================
Bus 001 Device 004: ID 046d:082b Logitech, Inc. Webcam C170
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0a81:0101 Chesen Electronics Corp. Keyboard
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c526 Logitech, Inc. Nano Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
|__ Port 4: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 4, If 2, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 4: Dev 4, If 3, Class=Audio, Driver=snd-usb-audio, 480M
=================================== cmdline: ==================================
BOOT_IMAGE=/boot/vmlinuz-4.4.0-70-generic root=UUID=fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509 ro quiet splash vt.handoff=7
==================================== dmesg: ===================================
[ 0.121375] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.125702] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 8.233834] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 266.520024] blk_update_request: I/O error, dev fd0, sector 0
[ 266.520029] floppy: error -5 while reading block 0
[ 271.396025] blk_update_request: I/O error, dev fd0, sector 0
[ 271.396031] floppy: error -5 while reading block 0
[ 277.596027] blk_update_request: I/O error, dev fd0, sector 0
[ 277.596033] floppy: error -5 while reading block 0
============================= boot-up statistics: =============================
Startup finished in 3.831s (kernel) + 20.650s (userspace) = 24.481s
blame, first 10:
dev-sda7.device 9.347s
networking.service 8.896s
speech-dispatcher.service 8.781s
apparmor.service 6.810s
grub-common.service 5.833s
irqbalance.service 5.679s
apport.service 5.555s
ondemand.service 5.431s
ModemManager.service 4.276s
thermald.service 3.661s
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @20.633s
2 multi-user.target @20.633s
3 grub-common.service @14.799s +5.833s
4 basic.target @11.380s
5 sockets.target @11.380s
6 snapd.socket @11.332s +46ms
7 sysinit.target @11.332s
8 swap.target @11.332s
9 dev-disk-by\x2duuid-ca1a9cde\x2dd671\x2d4509\x2d8d61\x2d89994b189713.swap @11.207s +124ms
10 dev-disk-by\x2duuid-ca1a9cde\x2dd671\x2d4509\x2d8d61\x2d89994b189713.device @11.161s
================================== locales: ===================================
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr,us
variant: oss,
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
BACKSPACE="guess"
====================================== Modules: ================================
Module Size Used by
8250_fintek 16384 0
asus_atk0110 20480 0
autofs4 40960 2
coretemp 16384 0
drm 364544 11 ttm,drm_kms_helper,nouveau
drm_kms_helper 155648 1 nouveau
fb_sys_fops 16384 1 drm_kms_helper
fjes 28672 0
floppy 73728 0
gpio_ich 16384 0
hid 118784 2 hid_generic,usbhid
hid_generic 16384 0
i2c_algo_bit 16384 1 nouveau
input_leds 16384 0
irqbypass 16384 1 kvm
joydev 20480 0
kvm 544768 1 kvm_intel
kvm_intel 172032 0
lp 20480 0
lpc_ich 24576 0
mac_hid 16384 0
media 24576 2 uvcvideo,videodev
mii 16384 1 r8169
mxm_wmi 16384 1 nouveau
nouveau 1495040 8
parport 49152 3 lp,ppdev,parport_pc
parport_pc 32768 1
pata_acpi 16384 0
ppdev 20480 0
psmouse 131072 0
r8169 81920 0
serio_raw 16384 0
shpchp 36864 0
snd 81920 20 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
snd_hda_codec 135168 3 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel
snd_hda_codec_generic 77824 1 snd_hda_codec_realtek
snd_hda_codec_realtek 86016 1
snd_hda_core 73728 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hda_intel 40960 3
snd_hwdep 16384 2 snd_usb_audio,snd_hda_codec
snd_pcm 106496 4 snd_usb_audio,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_rawmidi 32768 2 snd_usbmidi_lib,snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 32768 2 snd_pcm,snd_seq
snd_usb_audio 176128 1
snd_usbmidi_lib 36864 1 snd_usb_audio
soundcore 16384 1 snd
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
ttm 94208 1 nouveau
usbhid 49152 0
uvcvideo 90112 0
v4l2_common 16384 1 videobuf2_v4l2
video 40960 1 nouveau
videobuf2_core 36864 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 28672 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 176128 4 uvcvideo,v4l2_common,videobuf2_core,videobuf2_v4l2
wmi 20480 2 mxm_wmi,nouveau
==================================== xorg: ===================================
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=8 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=9 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ CHESEN USB Keyboard id=10 [slave keyboard (3)]
↳ CHESEN USB Keyboard id=11 [slave keyboard (3)]
↳ Webcam C170 id=12 [slave keyboard (3)]
xrandr:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
DVI-I-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
1920x1080 60.00*+
1600x1200 60.00
1680x1050 59.88
1280x1024 75.02 60.02
1440x900 74.98 59.90
1152x864 75.00
1280x720 60.00
1024x768 75.08 70.07 60.00
832x624 74.55
800x600 72.19 75.00 60.32 56.25
640x480 75.00 72.81 66.67 60.00
720x400 70.08
VGA-1 disconnected (normal left inverted right x axis y axis)
============================== Additional drivers: =============================
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
model : G98 [GeForce 8400 GS Rev. 2]
modalias : pci:v000010DEd000006E4sv00001458sd000034BAbc03sc00i00
vendor : NVIDIA Corporation
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-340 - distro non-free recommended
driver : nvidia-304 - distro non-free
============================= Upgradable packages: =============================
apparmor 2.10.95-0ubuntu2.6 from:2.10.95-0ubuntu2.5
libapparmor-perl 2.10.95-0ubuntu2.6 from:2.10.95-0ubuntu2.5
libapparmor1 2.10.95-0ubuntu2.6 from:2.10.95-0ubuntu2.5
================================ Broken packages: ==============================
aptitude program not available on this system.
======================== Package configuration pending: ========================
None
========================== Package install interrupted: ========================
Reading package lists...
Building dependency tree...
Reading state information...
The following package was automatically installed and is no longer required:
ubuntu-core-launcher
Use 'sudo apt autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
========================= UEFI Boot Manager settings: ==========================
efibootmgr: EFI variables are not supported on this system.
================================== Secure Boot: ================================
Secure Boot disabled or not supported on this system.
============================ Disks SMART attributes: ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-70-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue (SATA)
Device Model: WDC WD5000AAKS-00M9A0
LU WWN Device Id: 5 0014ee 00178fe33
Firmware Version: 05.01D05
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Mar 29 10:08:06 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 142 140 021 - 3891
4 Start_Stop_Count -O--CK 096 096 000 - 4101
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 090 090 000 - 7670
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 096 096 000 - 4100
192 Power-Off_Retract_Count -O--CK 200 200 000 - 39
193 Load_Cycle_Count -O--CK 199 199 000 - 4061
194 Temperature_Celsius -O---K 109 099 000 - 34
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 1
198 Offline_Uncorrectable ----CK 200 200 000 - 1
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
=============================== StdErr Messages: ===============================
E: Aucun paquet n'a été trouvé
Hors ligne
#27 Le 29/03/2017, à 10:27
- malbo
Re : [Résolu] Lenteur Ubuntu 16 04
Je crois qu'il faut essayer de blacklister le module floppy suivant la procédure détaillée dans ce post de winux : https://forum.ubuntu-fr.org/viewtopic.p … #p21542716
La première commande à passer dans un terminal est donc la suivante (ne cherche même pas à la taper. Utilise le copier-coller) :
echo "blacklist floppy" | sudo tee /etc/modprobe.d/blacklist-floppy.conf
Ton mot de passe sera demandé normalement.
Tu peux ensuite poursuivre toute la procédure complète du post de winux.
Quelque soit le résultat, refais un rapport bisnext et colle-le dans ta réponse.
Dernière modification par malbo (Le 29/03/2017, à 10:29)
Hors ligne
#28 Le 29/03/2017, à 10:35
- philburgt
Re : [Résolu] Lenteur Ubuntu 16 04
bisnext 0.01
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos7)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disque /dev/sda : 465,8 GiB, 500107862016 octets, 976773168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 40,962,047 40,960,000 83 Linux
/dev/sda2 40,964,094 976,772,667 935,808,574 5 Extended
/dev/sda5 40,964,096 43,012,095 2,048,000 82 Linux swap / Solaris
/dev/sda6 43,014,144 915,333,119 872,318,976 83 Linux
/dev/sda7 915,335,168 976,772,667 61,437,500 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 bb66d2c2-7089-4561-a246-3b7dabef0457 ext4
/dev/sda5 ca1a9cde-d671-4509-8d61-89994b189713 swap
/dev/sda6 dc2d5104-516e-4324-ba88-c6c1552067f5 ext4
/dev/sda7 fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509 ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 mars 29 10:03 ata-HL-DT-ST_DVDRAM_GH22NS50_12A272C95198 -> ../../sr0
lrwxrwxrwx 1 root root 9 mars 29 10:03 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911 -> ../../sda
lrwxrwxrwx 1 root root 10 mars 29 10:03 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mars 29 10:03 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mars 29 10:03 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 mars 29 10:03 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 mars 29 10:03 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part7 -> ../../sda7
lrwxrwxrwx 1 root root 9 mars 29 10:03 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 mars 29 10:03 wwn-0x50014ee00178fe33 -> ../../sda
lrwxrwxrwx 1 root root 10 mars 29 10:03 wwn-0x50014ee00178fe33-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mars 29 10:03 wwn-0x50014ee00178fe33-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mars 29 10:03 wwn-0x50014ee00178fe33-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 mars 29 10:03 wwn-0x50014ee00178fe33-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 mars 29 10:03 wwn-0x50014ee00178fe33-part7 -> ../../sda7
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda7 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-bb66d2c2-7089-4561-a246-3b7dabef0457' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
linux /boot/vmlinuz-4.4.0-66-generic root=UUID=bb66d2c2-7089-4561-a246-3b7dabef0457 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-66-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=bb66d2c2-7089-4561-a246-3b7dabef0457 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda6 during installation
UUID=dc2d5104-516e-4324-ba88-c6c1552067f5 /home ext4 defaults 0 2
# swap was on /dev/sda5 during installation
UUID=ca1a9cde-d671-4509-8d61-89994b189713 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
1.344463348 = 1.443606528 boot/grub/grub.cfg 1
0.817115784 = 0.877371392 boot/grub/i386-pc/core.img 1
10.990798950 = 11.801280512 boot/vmlinuz-3.13.0-112-generic 1
1.406726837 = 1.510461440 boot/vmlinuz-4.4.0-66-generic 1
1.406726837 = 1.510461440 vmlinuz 1
10.990798950 = 11.801280512 vmlinuz.old 1
6.647541046 = 7.137742848 boot/initrd.img-3.13.0-112-generic 4
14.518726349 = 15.589363712 boot/initrd.img-4.4.0-66-generic 2
14.518726349 = 15.589363712 initrd.img 2
6.647541046 = 7.137742848 initrd.img.old 4
=========================== sda7/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
else
search --no-floppy --fs-uuid --set=root fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
else
search --no-floppy --fs-uuid --set=root fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
fi
linux /boot/vmlinuz-4.4.0-70-generic root=UUID=fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-70-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
else
search --no-floppy --fs-uuid --set=root fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
else
search --no-floppy --fs-uuid --set=root fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 16.04.2 LTS (16.04) (sur /dev/sda1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-bb66d2c2-7089-4561-a246-3b7dabef0457' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
linux /boot/vmlinuz-4.4.0-66-generic root=UUID=bb66d2c2-7089-4561-a246-3b7dabef0457 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-66-generic
}
--------------------------------------------------------------------------------
=============================== sda7/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda7 during installation
UUID=fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=ca1a9cde-d671-4509-8d61-89994b189713 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
438.617568970 = 470.962028544 boot/grub/grub.cfg 1
446.604515076 = 479.537946624 boot/grub/i386-pc/core.img 1
437.976287842 = 470.273458176 boot/vmlinuz-4.4.0-31-generic 1
441.361373901 = 473.908166656 boot/vmlinuz-4.4.0-70-generic 1
441.361373901 = 473.908166656 vmlinuz 1
437.976287842 = 470.273458176 vmlinuz.old 1
438.617443085 = 470.961893376 boot/initrd.img-4.4.0-31-generic 4
447.782218933 = 480.802496512 boot/initrd.img-4.4.0-70-generic 3
447.782218933 = 480.802496512 initrd.img 3
438.617443085 = 470.961893376 initrd.img.old 4
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 1c 00 00 00 c4 1f 06 00 78 91 aa ff 0e 00 00 00 |........x.......|
00000010 00 41 0e 10 4b 86 02 0d 06 00 00 00 00 00 00 00 |.A..K...........|
00000020 1c 00 00 00 e4 1f 06 00 68 91 aa ff 1b 00 00 00 |........h.......|
00000030 00 45 0e 10 43 86 02 0d 06 00 00 00 00 00 00 00 |.E..C...........|
00000040 1c 00 00 00 04 20 06 00 68 91 aa ff 38 00 00 00 |..... ..h...8...|
00000050 00 48 0e 10 45 86 02 0d 06 00 00 00 00 00 00 00 |.H..E...........|
00000060 1c 00 00 00 24 20 06 00 88 91 aa ff 14 00 00 00 |....$ ..........|
00000070 00 48 0e 10 43 86 02 0d 06 00 00 00 00 00 00 00 |.H..C...........|
00000080 1c 00 00 00 44 20 06 00 88 91 aa ff 82 00 00 00 |....D ..........|
00000090 00 41 0e 10 45 86 02 0d 06 4f 83 03 00 00 00 00 |.A..E....O......|
000000a0 1c 00 00 00 64 20 06 00 f8 91 aa ff 0b 00 00 00 |....d ..........|
000000b0 00 41 0e 10 48 86 02 0d 06 00 00 00 00 00 00 00 |.A..H...........|
000000c0 1c 00 00 00 84 20 06 00 78 a7 aa ff 1b 00 00 00 |..... ..x.......|
000000d0 00 41 0e 10 4f 86 02 0d 06 00 00 00 00 00 00 00 |.A..O...........|
000000e0 1c 00 00 00 a4 20 06 00 78 a7 aa ff 1b 00 00 00 |..... ..x.......|
000000f0 00 41 0e 10 4f 86 02 0d 06 00 00 00 00 00 00 00 |.A..O...........|
00000100 1c 00 00 00 c4 20 06 00 a8 91 aa ff 9d 00 00 00 |..... ..........|
00000110 00 41 0e 10 43 86 02 0d 06 56 8c 03 83 04 00 00 |.A..C....V......|
00000120 1c 00 00 00 e4 20 06 00 28 92 aa ff 8f 01 00 00 |..... ..(.......|
00000130 00 41 0e 10 4a 86 02 0d 06 49 83 04 8c 03 00 00 |.A..J....I......|
00000140 1c 00 00 00 04 21 06 00 98 93 aa ff 2f 01 00 00 |.....!....../...|
00000150 00 4f 0e 10 49 86 02 0d 06 00 00 00 00 00 00 00 |.O..I...........|
00000160 1c 00 00 00 24 21 06 00 a8 94 aa ff 7f 00 00 00 |....$!..........|
00000170 00 41 0e 10 43 86 02 0d 06 45 8c 03 41 83 04 00 |.A..C....E..A...|
00000180 24 00 00 00 44 21 06 00 08 95 aa ff ba 00 00 00 |$...D!..........|
00000190 00 41 0e 10 43 86 02 0d 06 45 8f 03 47 8d 05 8e |.A..C....E..G...|
000001a0 04 46 83 07 8c 06 00 00 24 00 00 00 6c 21 06 00 |.F......$...l!..|
000001b0 a0 95 aa ff df 04 00 00 00 41 0e 10 43 86 00 fe |.........A..C...|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 40 1f 00 00 fe |...........@....|
000001d0 ff ff 05 fe ff ff 02 40 1f 00 00 90 fe 33 00 00 |.......@.....3..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
==================================== inxi report: ==============================
System: Kernel: 4.4.0-70-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine: Device: desktop Mobo: ASUSTeK model: P5KPL/EPU v: Rev X.0x
BIOS: American Megatrends v: 0308 date: 03/11/2009
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Dual core Intel Core2 Duo E8400 (-MCP-) cache: 6144 KB bmips: 11988
clock speeds: min/max: 1998/2997 MHz 1: 2997 MHz 2: 1998 MHz
CPU Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov
constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts est flexpriority
fpu fxsr ht lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat
pbe pdcm pebs pge pni pse pse36 rep_good sep smx ss sse sse2 sse4_1
ssse3 syscall tm tm2 tpr_shadow tsc vme vmx vnmi xsave xtpr
Memory: Array-1 capacity: 8 GB (est) devices: 4 EC: None
max module size: 4 GB
Device-1: DIMM0 size: 2 GB (Double-bank) speed: 800 MHz type: DDR2
manufacturer: N/A part: N/A
Device-2: DIMM1 size: No Module Installed type: N/A
Device-3: DIMM2 size: 2 GB (Double-bank) speed: 800 MHz type: DDR2
manufacturer: N/A part: N/A
Device-4: DIMM3 size: No Module Installed type: N/A
Graphics: Card: NVIDIA G98 [GeForce 8400 GS Rev. 2]
bus-ID: 01:00.0 chip-ID: 10de:06e4
Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: modesetting,fbdev,vesa)
tty size: 1920x1080@60.00hz
GLX Renderer: Gallium 0.4 on NV98
GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
Audio: Card-1 Intel NM10/ICH7 Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:27d8
Card-2 Logitech Webcam C170
driver: USB Audio usb-ID: 001-004 chip-ID: 046d:082b
Sound: Advanced Linux Sound Architecture v: k4.4.0-70-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: e800
bus-ID: 02:00.0 chip-ID: 10ec:8168
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 500.1GB (2.5% used)
ID-1: /dev/sda model: WDC_WD5000AAKS size: 500.1GB
Optical: /dev/sr0 model: HL-DT-ST DVDRAM GH22NS50
rev: TN00 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 48x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 29G used: 11G (40%) fs: ext4 dev: /dev/sda7
label: N/A uuid: fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509
ID-2: swap-1 size: 1.05GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
label: N/A uuid: ca1a9cde-d671-4509-8d61-89994b189713
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sda1 size: 20.97G
fs: ext4 label: N/A uuid: bb66d2c2-7089-4561-a246-3b7dabef0457
ID-2: /dev/sda6 size: 446.63G
fs: ext4 label: N/A uuid: dc2d5104-516e-4324-ba88-c6c1552067f5
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://archive.ubuntu.com/ubuntu xenial main restricted
deb http://archive.ubuntu.com/ubuntu xenial-updates main restricted
deb http://archive.ubuntu.com/ubuntu xenial universe
deb http://archive.ubuntu.com/ubuntu xenial-updates universe
deb http://archive.ubuntu.com/ubuntu xenial multiverse
deb http://archive.ubuntu.com/ubuntu xenial-updates multiverse
deb http://archive.ubuntu.com/ubuntu xenial-backports main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu xenial-security main restricted
deb http://archive.ubuntu.com/ubuntu xenial-security universe
deb http://archive.ubuntu.com/ubuntu xenial-security multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 13.4% command: firefox pid: 1677 mem: 354.12MB (10.0%)
2: cpu: 12.6% command: plugin-container pid: 1832 mem: 829.80MB (23.6%)
3: cpu: 4.3% command: Xorg pid: 896 mem: 71.99MB (2.0%)
4: cpu: 2.4% command: bash pid: 10491 mem: 4.47MB (0.1%)
5: cpu: 1.1% command: compiz pid: 1308 mem: 108.80MB (3.0%)
6: cpu: 0.4% command: gnome-terminal-server pid: 4731 mem: 34.59MB (0.9%)
7: cpu: 0.3% command: pulseaudio pid: 1366 mem: 12.41MB (0.3%)
8: cpu: 0.1% command: gnome-software pid: 1475 mem: 86.89MB (2.4%)
9: cpu: 0.0% command: sed pid: 11563 mem: 1.06MB (0.0%)
10: cpu: 0.0% command: bash pid: 11561 mem: 3.29MB (0.0%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 829.80MB (23.6%) command: plugin-container pid: 1832 cpu: 12.6%
2: mem: 354.12MB (10.0%) command: firefox pid: 1677 cpu: 13.4%
3: mem: 108.80MB (3.0%) command: compiz pid: 1308 cpu: 1.1%
4: mem: 86.89MB (2.4%) command: gnome-software pid: 1475 cpu: 0.1%
5: mem: 71.99MB (2.0%) command: Xorg pid: 896 cpu: 4.3%
6: mem: 60.15MB (1.7%) command: evolution-calendar-factory pid: 1573 cpu: 0.0%
7: mem: 54.53MB (1.5%) command: nautilus pid: 1490 cpu: 0.0%
8: mem: 51.51MB (1.4%) command: unity-settings-daemon pid: 1274 cpu: 0.0%
9: mem: 51.12MB (1.4%) command: evolution-calendar-factory-subprocess pid: 1624 cpu: 0.0%
10: mem: 51.08MB (1.4%) command: evolution-calendar-factory-subprocess pid: 1606 cpu: 0.0%
Info: Processes: 174 Uptime: 30 min Memory: 1553.6/3511.6MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8
=================================== rfkill: ===================================
=================================== lsusb: ====================================
Bus 001 Device 004: ID 046d:082b Logitech, Inc. Webcam C170
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0a81:0101 Chesen Electronics Corp. Keyboard
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c526 Logitech, Inc. Nano Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
|__ Port 4: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 4, If 2, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 4: Dev 4, If 3, Class=Audio, Driver=snd-usb-audio, 480M
=================================== cmdline: ==================================
BOOT_IMAGE=/boot/vmlinuz-4.4.0-70-generic root=UUID=fb8e81a5-1971-4ad1-ad40-4b4e9cd4d509 ro quiet splash vt.handoff=7
==================================== dmesg: ===================================
[ 0.121375] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.125702] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 8.233834] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 266.520024] blk_update_request: I/O error, dev fd0, sector 0
[ 266.520029] floppy: error -5 while reading block 0
[ 271.396025] blk_update_request: I/O error, dev fd0, sector 0
[ 271.396031] floppy: error -5 while reading block 0
[ 277.596027] blk_update_request: I/O error, dev fd0, sector 0
[ 277.596033] floppy: error -5 while reading block 0
[ 294.200026] blk_update_request: I/O error, dev fd0, sector 0
[ 294.200032] floppy: error -5 while reading block 0
============================= boot-up statistics: =============================
Startup finished in 3.831s (kernel) + 20.650s (userspace) = 24.481s
blame, first 10:
dev-sda7.device 9.347s
networking.service 8.896s
speech-dispatcher.service 8.781s
apparmor.service 6.810s
grub-common.service 5.833s
irqbalance.service 5.679s
apport.service 5.555s
ondemand.service 5.431s
ModemManager.service 4.276s
thermald.service 3.661s
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @20.633s
2 multi-user.target @20.633s
3 grub-common.service @14.799s +5.833s
4 basic.target @11.380s
5 sockets.target @11.380s
6 snapd.socket @11.332s +46ms
7 sysinit.target @11.332s
8 swap.target @11.332s
9 dev-disk-by\x2duuid-ca1a9cde\x2dd671\x2d4509\x2d8d61\x2d89994b189713.swap @11.207s +124ms
10 dev-disk-by\x2duuid-ca1a9cde\x2dd671\x2d4509\x2d8d61\x2d89994b189713.device @11.161s
================================== locales: ===================================
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr,us
variant: oss,
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
BACKSPACE="guess"
====================================== Modules: ================================
Module Size Used by
8250_fintek 16384 0
asus_atk0110 20480 0
autofs4 40960 2
coretemp 16384 0
cpuid 16384 0
drm 364544 11 ttm,drm_kms_helper,nouveau
drm_kms_helper 155648 1 nouveau
fb_sys_fops 16384 1 drm_kms_helper
fjes 28672 0
gpio_ich 16384 0
hid 118784 2 hid_generic,usbhid
hid_generic 16384 0
i2c_algo_bit 16384 1 nouveau
input_leds 16384 0
irqbypass 16384 1 kvm
joydev 20480 0
kvm 544768 1 kvm_intel
kvm_intel 172032 0
lp 20480 0
lpc_ich 24576 0
mac_hid 16384 0
media 24576 2 uvcvideo,videodev
mii 16384 1 r8169
mxm_wmi 16384 1 nouveau
nouveau 1495040 8
parport 49152 3 lp,ppdev,parport_pc
parport_pc 32768 1
pata_acpi 16384 0
ppdev 20480 0
psmouse 131072 0
r8169 81920 0
serio_raw 16384 0
shpchp 36864 0
snd 81920 23 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
snd_hda_codec 135168 3 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel
snd_hda_codec_generic 77824 1 snd_hda_codec_realtek
snd_hda_codec_realtek 86016 1
snd_hda_core 73728 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hda_intel 40960 5
snd_hwdep 16384 2 snd_usb_audio,snd_hda_codec
snd_pcm 106496 5 snd_usb_audio,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_rawmidi 32768 2 snd_usbmidi_lib,snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 32768 2 snd_pcm,snd_seq
snd_usb_audio 176128 1
snd_usbmidi_lib 36864 1 snd_usb_audio
soundcore 16384 1 snd
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
ttm 94208 1 nouveau
usbhid 49152 0
uvcvideo 90112 0
v4l2_common 16384 1 videobuf2_v4l2
video 40960 1 nouveau
videobuf2_core 36864 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 28672 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 176128 4 uvcvideo,v4l2_common,videobuf2_core,videobuf2_v4l2
wmi 20480 2 mxm_wmi,nouveau
==================================== xorg: ===================================
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=8 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=9 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ CHESEN USB Keyboard id=10 [slave keyboard (3)]
↳ CHESEN USB Keyboard id=11 [slave keyboard (3)]
↳ Webcam C170 id=12 [slave keyboard (3)]
xrandr:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
DVI-I-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
1920x1080 60.00*+
1600x1200 60.00
1680x1050 59.88
1280x1024 75.02 60.02
1440x900 74.98 59.90
1152x864 75.00
1280x720 60.00
1024x768 75.08 70.07 60.00
832x624 74.55
800x600 72.19 75.00 60.32 56.25
640x480 75.00 72.81 66.67 60.00
720x400 70.08
VGA-1 disconnected (normal left inverted right x axis y axis)
============================== Additional drivers: =============================
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
model : G98 [GeForce 8400 GS Rev. 2]
vendor : NVIDIA Corporation
modalias : pci:v000010DEd000006E4sv00001458sd000034BAbc03sc00i00
driver : nvidia-304 - distro non-free
driver : nvidia-340 - distro non-free recommended
driver : xserver-xorg-video-nouveau - distro free builtin
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
============================= Upgradable packages: =============================
apparmor 2.10.95-0ubuntu2.6 from:2.10.95-0ubuntu2.5
libapparmor-perl 2.10.95-0ubuntu2.6 from:2.10.95-0ubuntu2.5
libapparmor1 2.10.95-0ubuntu2.6 from:2.10.95-0ubuntu2.5
================================ Broken packages: ==============================
aptitude program not available on this system.
======================== Package configuration pending: ========================
None
========================== Package install interrupted: ========================
Reading package lists...
Building dependency tree...
Reading state information...
The following package was automatically installed and is no longer required:
ubuntu-core-launcher
Use 'sudo apt autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
========================= UEFI Boot Manager settings: ==========================
efibootmgr: EFI variables are not supported on this system.
================================== Secure Boot: ================================
Secure Boot disabled or not supported on this system.
============================ Disks SMART attributes: ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-70-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue (SATA)
Device Model: WDC WD5000AAKS-00M9A0
LU WWN Device Id: 5 0014ee 00178fe33
Firmware Version: 05.01D05
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Mar 29 10:34:05 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 142 140 021 - 3891
4 Start_Stop_Count -O--CK 096 096 000 - 4101
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 090 090 000 - 7670
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 096 096 000 - 4100
192 Power-Off_Retract_Count -O--CK 200 200 000 - 39
193 Load_Cycle_Count -O--CK 199 199 000 - 4061
194 Temperature_Celsius -O---K 108 099 000 - 35
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 1
198 Offline_Uncorrectable ----CK 200 200 000 - 1
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
=============================== StdErr Messages: ===============================
E: Aucun paquet n'a été trouvé
Hors ligne
#29 Le 29/03/2017, à 10:41
- moko138
Re : [Résolu] Lenteur Ubuntu 16 04
Il faut l'installer sur une clé USB. Moi je le fais depuis Windows avec cette recette mais si tu n'as que Ubuntu, tu peux utiliser une des méthodes proposées dans 5. Création d'un live-USB depuis Ubuntu. Il est possible que UNetbootin pour Linux te donne satisfaction. EDIT : je viens de voir qu'il y a une buse qui a cru utile d'écrire ceci s'agissant de UNetbootin : "Obsolète. Si par le passé ce software donnait de bons résultats il n'est malheureusement plus d'actualité et ne fonctionne pas avec les hardwares récents qui utilisent EFI" Quel sombre crétin...
Tu as bien fait de le dire. !) J'ai remis la formulation antérieure :
compatible avec de nombreuses distributions. Attention: crée un menu de boot non-standard.
Ça convient ?
Je signale à la modération la double modification.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#30 Le 29/03/2017, à 10:47
- malbo
Re : [Résolu] Lenteur Ubuntu 16 04
Je suppose qu'il n'y a pas d'amélioration du problème de lenteur. Si c'est bien le cas, je ne sais pas quoi te suggérer pour faire vivre cette installation. Mais Laurent85 aura sans doute quelque chose à te proposer. Si ce n'était pas le cas, et qu'un grand silence glacé tombait sur ce fil, je te conseillerais de faire une installation toute neuve de Ubuntu 14.04 sur sda7. Le but étant de vérifier que le problème de lenteur disparaît quand tu utilises 14.04.
Dernière modification par malbo (Le 29/03/2017, à 10:50)
Hors ligne
#31 Le 29/03/2017, à 10:50
- philburgt
Re : [Résolu] Lenteur Ubuntu 16 04
Pas de changement effectivement. En attendant je prépare la clef USB.
Hors ligne
#32 Le 29/03/2017, à 10:58
- malbo
Re : [Résolu] Lenteur Ubuntu 16 04
Attention. Ton installation précédente utilisait la version "de base" de la 14.04, équipée du noyau 3.13.0-8x (je viens de le contrôler ICI). Il est donc impératif que tu installes la version 14.04.1 64 bits (et non pas la version 14.04.5 64 bits qui vient avec le noyau et la gestion de l'affichage de Ubuntu 16.04). Le fichier ubuntu-14.04.1-desktop-amd64.iso à télécharger à l'avance est là : http://old-releases.ubuntu.com/releases … -amd64.iso
Hors ligne
#33 Le 29/03/2017, à 11:34
- Laurent85
Re : [Résolu] Lenteur Ubuntu 16 04
La version Ubuntu installée dans sda1, c'est la 16.04.2, elle est lente aussi ?
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
...
sda7: __________________________________________________________________________File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
Hors ligne
#34 Le 29/03/2017, à 11:39
- philburgt
Re : [Résolu] Lenteur Ubuntu 16 04
Oui, c'est celle qui a été installée avec la mise à niveau depuis 14 04, à l'origine de ce fil.
Dernière modification par philburgt (Le 29/03/2017, à 14:00)
Hors ligne
#35 Le 29/03/2017, à 11:59
- malbo
Re : [Résolu] Lenteur Ubuntu 16 04
En fait, la désignation Ubuntu 16.04.2 est trompeuse. Le noyau qui a été installé par la mise à niveau est de la famille 4.4.0-x comme tu peux voir dans cet extrait du post #28 :
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-bb66d2c2-7089-4561-a246-3b7dabef0457' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
linux /boot/vmlinuz-4.4.0-66-generic root=UUID=bb66d2c2-7089-4561-a246-3b7dabef0457 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-66-generic
}
C'est normal que ce soit un noyau de cette famille 4.4.0-x qui soit installé : j'ai déjà étudié la chose dans ce post : https://forum.ubuntu-fr.org/viewtopic.php?id=2005724
C'est la raison pour laquelle j'avais bien précisé dans le post #6 d'installer à partir de l'ISO ubuntu-16.04.1-desktop-amd64.iso : je savais que cet ISO allait bien installer un noyau de la famille 4.4.0-x
Hors ligne
#36 Le 29/03/2017, à 14:14
- philburgt
Re : [Résolu] Lenteur Ubuntu 16 04
Je lance une session live de 14 04 01
j'imagine que la procédure est la même que précédemment pour le formatage de sda7 et l’installation de 14 04 sur cette partition.
Merci de ta confirmation.
Je pense que si une idée de génie survient concernant la 16 04 je pourrais toujours la reprendre sur sda1, ai-je juste?
Hors ligne
#37 Le 29/03/2017, à 15:47
- malbo
Re : [Résolu] Lenteur Ubuntu 16 04
Je pense que si une idée de génie survient concernant la 16 04 je pourrais toujours la reprendre sur sda1, ai-je juste?
Oui.
Mais il y a une possibilité moins agréable, c'est que ton pb de lenteur soit présent quelque soit la version (16.04 ou 14.04) pour une raison qui resterait à déterminer. On croise les doigts.
Hors ligne
#38 Le 29/03/2017, à 17:00
- philburgt
Re : [Résolu] Lenteur Ubuntu 16 04
J'ai installé 14 04 01 et fait les mises à jour.
Après redémarrage la vitesse est redevenue "normale" pour l'ouverture de firefox. La navigation me semble lente.
J'ai toujours le flopy dans le lanceur et un volume 21 GB alors que rien n'est connecté.
http://paste.openstack.org/show/604671
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos7)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 têtes, 63 secteurs/piste, 60801 cylindres, total 976773168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 40,962,047 40,960,000 83 Linux
/dev/sda2 40,964,094 976,772,667 935,808,574 5 Extended
/dev/sda5 40,964,096 43,012,095 2,048,000 82 Linux swap / Solaris
/dev/sda6 43,014,144 915,333,119 872,318,976 83 Linux
/dev/sda7 915,335,168 976,772,667 61,437,500 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 bb66d2c2-7089-4561-a246-3b7dabef0457 ext4
/dev/sda5 ca1a9cde-d671-4509-8d61-89994b189713 swap
/dev/sda6 dc2d5104-516e-4324-ba88-c6c1552067f5 ext4
/dev/sda7 c33af8df-ece3-49be-9c7d-be10cdc3aa27 ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 mars 29 16:45 ata-HL-DT-ST_DVDRAM_GH22NS50_12A272C95198 -> ../../sr0
lrwxrwxrwx 1 root root 9 mars 29 16:45 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911 -> ../../sda
lrwxrwxrwx 1 root root 10 mars 29 16:46 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mars 29 16:45 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mars 29 16:45 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 mars 29 16:46 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 mars 29 16:45 ata-WDC_WD5000AAKS-00M9A0_WD-WMAVC0156911-part7 -> ../../sda7
lrwxrwxrwx 1 root root 9 mars 29 16:45 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 mars 29 16:45 wwn-0x50014ee00178fe33 -> ../../sda
lrwxrwxrwx 1 root root 10 mars 29 16:46 wwn-0x50014ee00178fe33-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mars 29 16:45 wwn-0x50014ee00178fe33-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mars 29 16:45 wwn-0x50014ee00178fe33-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 mars 29 16:46 wwn-0x50014ee00178fe33-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 mars 29 16:45 wwn-0x50014ee00178fe33-part7 -> ../../sda7
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /media/duburgt/bb66d2c2-7089-4561-a246-3b7dabef0457 ext4 (rw,nosuid,nodev,uhelper=udisks2)
/dev/sda6 /media/duburgt/dc2d5104-516e-4324-ba88-c6c1552067f5 ext4 (rw,nosuid,nodev,uhelper=udisks2)
/dev/sda7 / ext4 (rw,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-bb66d2c2-7089-4561-a246-3b7dabef0457' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
linux /boot/vmlinuz-4.4.0-66-generic root=UUID=bb66d2c2-7089-4561-a246-3b7dabef0457 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-66-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=bb66d2c2-7089-4561-a246-3b7dabef0457 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda6 during installation
UUID=dc2d5104-516e-4324-ba88-c6c1552067f5 /home ext4 defaults 0 2
# swap was on /dev/sda5 during installation
UUID=ca1a9cde-d671-4509-8d61-89994b189713 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
1.344463348 = 1.443606528 boot/grub/grub.cfg 1
0.817115784 = 0.877371392 boot/grub/i386-pc/core.img 1
10.990798950 = 11.801280512 boot/vmlinuz-3.13.0-112-generic 1
1.406726837 = 1.510461440 boot/vmlinuz-4.4.0-66-generic 1
1.406726837 = 1.510461440 vmlinuz 1
10.990798950 = 11.801280512 vmlinuz.old 1
6.647541046 = 7.137742848 boot/initrd.img-3.13.0-112-generic 4
14.518726349 = 15.589363712 boot/initrd.img-4.4.0-66-generic 2
14.518726349 = 15.589363712 initrd.img 2
6.647541046 = 7.137742848 initrd.img.old 4
=========================== sda7/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 c33af8df-ece3-49be-9c7d-be10cdc3aa27
else
search --no-floppy --fs-uuid --set=root c33af8df-ece3-49be-9c7d-be10cdc3aa27
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-c33af8df-ece3-49be-9c7d-be10cdc3aa27' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 c33af8df-ece3-49be-9c7d-be10cdc3aa27
else
search --no-floppy --fs-uuid --set=root c33af8df-ece3-49be-9c7d-be10cdc3aa27
fi
linux /boot/vmlinuz-3.13.0-113-generic root=UUID=c33af8df-ece3-49be-9c7d-be10cdc3aa27 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-113-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 c33af8df-ece3-49be-9c7d-be10cdc3aa27
else
search --no-floppy --fs-uuid --set=root c33af8df-ece3-49be-9c7d-be10cdc3aa27
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 c33af8df-ece3-49be-9c7d-be10cdc3aa27
else
search --no-floppy --fs-uuid --set=root c33af8df-ece3-49be-9c7d-be10cdc3aa27
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 16.04.2 LTS (16.04) (sur /dev/sda1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-bb66d2c2-7089-4561-a246-3b7dabef0457' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 bb66d2c2-7089-4561-a246-3b7dabef0457
else
search --no-floppy --fs-uuid --set=root bb66d2c2-7089-4561-a246-3b7dabef0457
fi
linux /boot/vmlinuz-4.4.0-66-generic root=UUID=bb66d2c2-7089-4561-a246-3b7dabef0457 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-66-generic
}
--------------------------------------------------------------------------------
=============================== sda7/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda7 during installation
UUID=c33af8df-ece3-49be-9c7d-be10cdc3aa27 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=ca1a9cde-d671-4509-8d61-89994b189713 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sda7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
440.885025024 = 473.396690944 boot/grub/grub.cfg 1
440.853080750 = 473.362391040 boot/grub/i386-pc/core.img 1
442.400955200 = 475.024408576 boot/vmlinuz-3.13.0-113-generic 1
437.799343109 = 470.083465216 boot/vmlinuz-3.13.0-32-generic 1
442.400955200 = 475.024408576 vmlinuz 1
437.799343109 = 470.083465216 vmlinuz.old 1
437.468849182 = 469.728600064 boot/initrd.img-3.13.0-113-generic 1
437.097667694 = 469.330046976 boot/initrd.img-3.13.0-32-generic 3
437.468849182 = 469.728600064 initrd.img 1
437.097667694 = 469.330046976 initrd.img.old 3
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 1c 00 00 00 c4 1f 06 00 78 91 aa ff 0e 00 00 00 |........x.......|
00000010 00 41 0e 10 4b 86 02 0d 06 00 00 00 00 00 00 00 |.A..K...........|
00000020 1c 00 00 00 e4 1f 06 00 68 91 aa ff 1b 00 00 00 |........h.......|
00000030 00 45 0e 10 43 86 02 0d 06 00 00 00 00 00 00 00 |.E..C...........|
00000040 1c 00 00 00 04 20 06 00 68 91 aa ff 38 00 00 00 |..... ..h...8...|
00000050 00 48 0e 10 45 86 02 0d 06 00 00 00 00 00 00 00 |.H..E...........|
00000060 1c 00 00 00 24 20 06 00 88 91 aa ff 14 00 00 00 |....$ ..........|
00000070 00 48 0e 10 43 86 02 0d 06 00 00 00 00 00 00 00 |.H..C...........|
00000080 1c 00 00 00 44 20 06 00 88 91 aa ff 82 00 00 00 |....D ..........|
00000090 00 41 0e 10 45 86 02 0d 06 4f 83 03 00 00 00 00 |.A..E....O......|
000000a0 1c 00 00 00 64 20 06 00 f8 91 aa ff 0b 00 00 00 |....d ..........|
000000b0 00 41 0e 10 48 86 02 0d 06 00 00 00 00 00 00 00 |.A..H...........|
000000c0 1c 00 00 00 84 20 06 00 78 a7 aa ff 1b 00 00 00 |..... ..x.......|
000000d0 00 41 0e 10 4f 86 02 0d 06 00 00 00 00 00 00 00 |.A..O...........|
000000e0 1c 00 00 00 a4 20 06 00 78 a7 aa ff 1b 00 00 00 |..... ..x.......|
000000f0 00 41 0e 10 4f 86 02 0d 06 00 00 00 00 00 00 00 |.A..O...........|
00000100 1c 00 00 00 c4 20 06 00 a8 91 aa ff 9d 00 00 00 |..... ..........|
00000110 00 41 0e 10 43 86 02 0d 06 56 8c 03 83 04 00 00 |.A..C....V......|
00000120 1c 00 00 00 e4 20 06 00 28 92 aa ff 8f 01 00 00 |..... ..(.......|
00000130 00 41 0e 10 4a 86 02 0d 06 49 83 04 8c 03 00 00 |.A..J....I......|
00000140 1c 00 00 00 04 21 06 00 98 93 aa ff 2f 01 00 00 |.....!....../...|
00000150 00 4f 0e 10 49 86 02 0d 06 00 00 00 00 00 00 00 |.O..I...........|
00000160 1c 00 00 00 24 21 06 00 a8 94 aa ff 7f 00 00 00 |....$!..........|
00000170 00 41 0e 10 43 86 02 0d 06 45 8c 03 41 83 04 00 |.A..C....E..A...|
00000180 24 00 00 00 44 21 06 00 08 95 aa ff ba 00 00 00 |$...D!..........|
00000190 00 41 0e 10 43 86 02 0d 06 45 8f 03 47 8d 05 8e |.A..C....E..G...|
000001a0 04 46 83 07 8c 06 00 00 24 00 00 00 6c 21 06 00 |.F......$...l!..|
000001b0 a0 95 aa ff df 04 00 00 00 41 0e 10 43 86 00 fe |.........A..C...|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 40 1f 00 00 fe |...........@....|
000001d0 ff ff 05 fe ff ff 02 40 1f 00 00 90 fe 33 00 00 |.......@.....3..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
==================================== inxi report: ==============================
System: Kernel: 3.13.0-113-generic x86_64 (64 bit gcc: 4.8.4)
Desktop: N/A dm: lightdm Distro: Ubuntu 14.04.5 LTS
Machine: Device: desktop Mobo: ASUSTeK model: P5KPL/EPU v: Rev X.0x
BIOS: American Megatrends v: 0308 date: 03/11/2009
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Dual core Intel Core2 Duo E8400 (-MCP-) cache: 6144 KB bmips: 11987
clock speeds: min/max: 1998/2997 MHz 1: 1998 MHz 2: 2997 MHz
CPU Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov
constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts est flexpriority
fpu fxsr ht lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat
pbe pdcm pebs pge pni pse pse36 rep_good sep smx ss sse sse2 sse4_1
ssse3 syscall tm tm2 tpr_shadow tsc vme vmx vnmi xsave xtpr
Memory: Array-1 capacity: 8 GB (est) devices: 4 EC: None
max module size: 4 GB
Device-1: DIMM0 size: 2 GB (Double-bank) speed: 800 MHz type: DDR2
manufacturer: N/A part: N/A
Device-2: DIMM1 size: No Module Installed type: N/A
Device-3: DIMM2 size: 2 GB (Double-bank) speed: 800 MHz type: DDR2
manufacturer: N/A part: N/A
Device-4: DIMM3 size: No Module Installed type: N/A
Graphics: Card: NVIDIA G98 [GeForce 8400 GS Rev. 2]
bus-ID: 01:00.0 chip-ID: 10de:06e4
Display Server: X.Org 1.15.1 drivers: nouveau (unloaded: modesetting,fbdev,vesa)
tty size: 1920x1080@60.0hz
GLX Renderer: Gallium 0.4 on NV98
GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
Audio: Card-1 Intel NM10/ICH7 Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:27d8
Card-2 Logitech Webcam C170
driver: USB Audio usb-ID: 001-004 chip-ID: 046d:082b
Sound: Advanced Linux Sound Architecture v: k3.13.0-113-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: e800
bus-ID: 02:00.0 chip-ID: 10ec:8168
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 500.1GB (9.0% used)
ID-1: /dev/sda model: WDC_WD5000AAKS size: 500.1GB
Optical: /dev/sr0 model: HL-DT-ST DVDRAM GH22NS50
rev: TN00 dev-links: cdrom
Features: speed: 48x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 29G used: 4.7G (18%) fs: ext4 dev: /dev/sda7
label: N/A uuid: c33af8df-ece3-49be-9c7d-be10cdc3aa27
ID-2: /media/duburgt/bb66d2c2-7089-4561-a246-3b7dabef0457 size: 20G used: 7.7G (43%) fs: ext4 dev: /dev/sda1
label: N/A uuid: bb66d2c2-7089-4561-a246-3b7dabef0457
ID-3: /media/duburgt/dc2d5104-516e-4324-ba88-c6c1552067f5 size: 410G used: 29G (8%) fs: ext4 dev: /dev/sda6
label: N/A uuid: dc2d5104-516e-4324-ba88-c6c1552067f5
ID-4: swap-1 size: 1.05GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
label: N/A uuid: ca1a9cde-d671-4509-8d61-89994b189713
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/fd0 size: 0.00G label: N/A uuid: N/A
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://archive.ubuntu.com/ubuntu trusty main restricted
deb-src http://archive.ubuntu.com/ubuntu trusty main restricted
deb http://archive.ubuntu.com/ubuntu trusty-updates main restricted
deb-src http://archive.ubuntu.com/ubuntu trusty-updates main restricted
deb http://archive.ubuntu.com/ubuntu trusty universe
deb-src http://archive.ubuntu.com/ubuntu trusty universe
deb http://archive.ubuntu.com/ubuntu trusty-updates universe
deb-src http://archive.ubuntu.com/ubuntu trusty-updates universe
deb http://archive.ubuntu.com/ubuntu trusty multiverse
deb-src http://archive.ubuntu.com/ubuntu trusty multiverse
deb http://archive.ubuntu.com/ubuntu trusty-updates multiverse
deb-src http://archive.ubuntu.com/ubuntu trusty-updates multiverse
deb http://archive.ubuntu.com/ubuntu trusty-backports main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu trusty-backports main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu trusty-security main restricted
deb-src http://archive.ubuntu.com/ubuntu trusty-security main restricted
deb http://archive.ubuntu.com/ubuntu trusty-security universe
deb-src http://archive.ubuntu.com/ubuntu trusty-security universe
deb http://archive.ubuntu.com/ubuntu trusty-security multiverse
deb-src http://archive.ubuntu.com/ubuntu trusty-security multiverse
deb http://extras.ubuntu.com/ubuntu trusty main
deb-src http://extras.ubuntu.com/ubuntu trusty main
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 20.2% command: firefox pid: 1837 mem: 295.24MB (8.4%)
2: cpu: 14.9% command: plugin-container pid: 1941 mem: 275.84MB (7.8%)
3: cpu: 2.2% command: X pid: 1044 mem: 51.33MB (1.4%)
4: cpu: 1.4% command: compiz pid: 1563 mem: 108.93MB (3.1%)
5: cpu: 0.8% command: bash pid: 3139 mem: 3.05MB (0.0%)
6: cpu: 0.4% command: gnome-terminal pid: 2325 mem: 19.05MB (0.5%)
7: cpu: 0.4% command: nautilus pid: 1592 mem: 40.04MB (1.1%)
8: cpu: 0.2% command: unity-scope-loader pid: 2251 mem: 20.87MB (0.5%)
9: cpu: 0.1% command: unity-scope-home pid: 2235 mem: 16.92MB (0.4%)
10: cpu: 0.1% command: hud-service pid: 1216 mem: 23.18MB (0.6%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 295.24MB (8.4%) command: firefox pid: 1837 cpu: 20.2%
2: mem: 275.84MB (7.8%) command: plugin-container pid: 1941 cpu: 14.9%
3: mem: 108.93MB (3.1%) command: compiz pid: 1563 cpu: 1.4%
4: mem: 51.33MB (1.4%) command: X pid: 1044 cpu: 2.2%
5: mem: 47.96MB (1.3%) command: evolution-calendar-factory pid: 1600 cpu: 0.0%
6: mem: 40.04MB (1.1%) command: nautilus pid: 1592 cpu: 0.4%
7: mem: 23.18MB (0.6%) command: hud-service pid: 1216 cpu: 0.1%
8: mem: 20.87MB (0.5%) command: unity-scope-loader pid: 2251 cpu: 0.2%
9: mem: 20.02MB (0.5%) command: nm-applet pid: 1596 cpu: 0.0%
10: mem: 19.05MB (0.5%) command: gnome-terminal pid: 2325 cpu: 0.4%
Info: Processes: 175 Uptime: 9 min Memory: 845.3/3513.2MB
Init: Upstart v: 1.12.1 runlevel: 2 default: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.111 running in bash) inxi: 2.3.8
=================================== rfkill: ===================================
=================================== lsusb: ====================================
Bus 001 Device 004: ID 046d:082b Logitech, Inc. Webcam C170
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0a81:0101 Chesen Electronics Corp. Keyboard
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c526 Logitech, Inc. Nano Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
|__ Port 4: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 4, If 2, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 4: Dev 4, If 3, Class=Audio, Driver=snd-usb-audio, 480M
=================================== cmdline: ==================================
BOOT_IMAGE=/boot/vmlinuz-3.13.0-113-generic root=UUID=c33af8df-ece3-49be-9c7d-be10cdc3aa27 ro quiet splash vt.handoff=7
==================================== dmesg: ===================================
[ 0.093713] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.098192] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 14.691561] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 98.573290] systemd-hostnamed[2105]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 306.036035] end_request: I/O error, dev fd0, sector 0
[ 309.252025] end_request: I/O error, dev fd0, sector 0
[ 551.396028] end_request: I/O error, dev fd0, sector 0
[ 557.780030] end_request: I/O error, dev fd0, sector 0
================================== locales: ===================================
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
/etc/default/locale:
LANG="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr,us
variant: oss,
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
====================================== Modules: ================================
Module Size Used by
asus_atk0110 18657 0
bluetooth 391136 10 bnep,rfcomm
bnep 19624 2
coretemp 13435 0
drm 303102 5 ttm,drm_kms_helper,nouveau
drm_kms_helper 55071 1 nouveau
floppy 69418 0
gpio_ich 13476 0
hid 106148 2 hid_generic,usbhid
hid_generic 12548 0
i2c_algo_bit 13413 1 nouveau
joydev 17381 0
kvm 455843 1 kvm_intel
kvm_intel 143187 0
lp 17759 0
lpc_ich 21080 0
mac_hid 13205 0
mii 13934 1 r8169
mxm_wmi 13021 1 nouveau
nouveau 1097288 3
parport 42348 3 lp,ppdev,parport_pc
parport_pc 32701 1
pata_acpi 13038 0
ppdev 17671 0
psmouse 106692 0
r8169 71677 0
rfcomm 69160 0
serio_raw 13462 0
shpchp 37032 0
snd 69416 20 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
snd_hda_codec 193017 2 snd_hda_codec_realtek,snd_hda_intel
snd_hda_codec_realtek 65904 1
snd_hda_intel 56611 3
snd_hwdep 13602 2 snd_usb_audio,snd_hda_codec
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
snd_pcm 102099 3 snd_usb_audio,snd_hda_codec,snd_hda_intel
snd_rawmidi 30731 2 snd_usbmidi_lib,snd_seq_midi
snd_seq 61616 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_timer 29549 2 snd_pcm,snd_seq
snd_usb_audio 155107 1
snd_usbmidi_lib 29282 1 snd_usb_audio
soundcore 12680 1 snd
ttm 93424 1 nouveau
usbhid 52659 0
uvcvideo 80885 0
video 19476 1 nouveau
videobuf2_core 40664 1 uvcvideo
videobuf2_memops 13362 1 videobuf2_vmalloc
videobuf2_vmalloc 13216 1 uvcvideo
videodev 134688 2 uvcvideo,videobuf2_core
wmi 19177 2 mxm_wmi,nouveau
==================================== xorg: ===================================
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=8 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=9 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ CHESEN USB Keyboard id=10 [slave keyboard (3)]
↳ CHESEN USB Keyboard id=11 [slave keyboard (3)]
↳ Webcam C170 id=12 [slave keyboard (3)]
xrandr:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
DVI-I-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
1920x1080 60.0*+
1600x1200 60.0
1680x1050 59.9
1280x1024 75.0 60.0
1440x900 75.0 59.9
1152x864 75.0
1280x720 60.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 60.0
720x400 70.1
VGA-1 disconnected (normal left inverted right x axis y axis)
============================== Additional drivers: =============================
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd000006E4sv00001458sd000034BAbc03sc00i00
model : G98 [GeForce 8400 GS Rev. 2]
vendor : NVIDIA Corporation
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-340 - distro non-free recommended
driver : nvidia-173 - distro non-free
driver : nvidia-304 - distro non-free
============================= Upgradable packages: =============================
libmm-glib0 1.0.0-2ubuntu1.1 from:1.0.0-2ubuntu1
libnautilus-extension1a 1:3.10.1-0ubuntu9.11 from:1:3.10.1-0ubuntu9.3
modemmanager 1.0.0-2ubuntu1.1 from:1.0.0-2ubuntu1
nautilus 1:3.10.1-0ubuntu9.11 from:1:3.10.1-0ubuntu9.3
nautilus-data 1:3.10.1-0ubuntu9.11 from:1:3.10.1-0ubuntu9.3
oneconf 0.3.7.14.04.1 from:0.3.7
oneconf-common 0.3.7.14.04.1 from:0.3.7
python-oneconf 0.3.7.14.04.1 from:0.3.7
python3-oneconf 0.3.7.14.04.1 from:0.3.7
================================ Broken packages: ==============================
aptitude program not available on this system.
======================== Package configuration pending: ========================
None
========================== Package install interrupted: ========================
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 9 not upgraded.
================================== Secure Boot: ================================
Secure Boot disabled or not supported on this system.
============================ Disks SMART attributes: ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-113-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue (SATA)
Device Model: WDC WD5000AAKS-00M9A0
LU WWN Device Id: 5 0014ee 00178fe33
Firmware Version: 05.01D05
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Mar 29 16:55:19 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 142 140 021 - 3900
4 Start_Stop_Count -O--CK 096 096 000 - 4103
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 090 090 000 - 7675
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 096 096 000 - 4102
192 Power-Off_Retract_Count -O--CK 200 200 000 - 39
193 Load_Cycle_Count -O--CK 199 199 000 - 4063
194 Temperature_Celsius -O---K 106 099 000 - 37
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 1
198 Offline_Uncorrectable ----CK 200 200 000 - 1
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
=============================== StdErr Messages: ===============================
E: Aucun paquet n'a été trouvé
Je pars, retour mardi...
Dernière modification par philburgt (Le 29/03/2017, à 17:19)
Hors ligne
#39 Le 29/03/2017, à 18:21
- malbo
Re : [Résolu] Lenteur Ubuntu 16 04
Extrait du rapport que tu as collé dans le post #38 :
=================================== cmdline: ==================================
BOOT_IMAGE=/boot/vmlinuz-3.13.0-113-generic root=UUID=c33af8df-ece3-49be-9c7d-be10cdc3aa27 ro quiet splash vt.handoff=7
C'est le noyau de la famille 3.13.0-x qui est utilisé donc c'est bien ce qui était attendu. Tu signales que "la vitesse est redevenue "normale" pour l'ouverture de firefox." mais dans le post #1, tu avais écrit "tout est bcp plus lent". Hormis Firefox, est-ce que tout est redevenu aussi rapide qu'avant ou pas ?
Hors ligne
#40 Le 29/03/2017, à 18:41
- philburgt
Re : [Résolu] Lenteur Ubuntu 16 04
La navigation est plus lente qu'avant. Le chargement des images (firefox ou visionneuse). L'actualisation des pages web.
J'ai relancer la 16 04 du sda1 et à part l'ouverture de firefox c'est mieux que la 14 04 (qui plante en plus). Donc je vais rester sur la 16 04 pour le moment qui a plus d'avantage que d'inconvénient.
Je reviens mardi pour des tests plus poussés.
Déjà un immense merci pour toute cette expertise et cette patience une fois de plus.
Hors ligne
#41 Le 29/03/2017, à 18:50
- malbo
Re : [Résolu] Lenteur Ubuntu 16 04
Coup de théâtre : la 16.04 issue de la migration est finalement la moins mauvaise. Moi, je crois que je vais en rester là...
Hors ligne
#42 Le 29/03/2017, à 21:52
- Laurent85
Re : [Résolu] Lenteur Ubuntu 16 04
Oui, c'est celle qui a été installée avec la mise à niveau depuis 14 04, à l'origine de ce fil.
Bah non, le premier rapport bisnext a été généré à partir du système sur sda7, qui au départ était encore la version 16.04.1. Je crois qu'on se mélange les pinceaux avec ces deux systèmes. Les deux sont lents si je comprends bien ! et les deux ont été mis à niveau de 14.04 vers 16.04 ?
1er rapport :
bisnext report id 1791b
...
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
2è rapport
bisnext report id 229f4
...
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
Je pense que ce que tu appelles lenteur n'a rien d'anormal compte tenu de ton matériel
Machine: Device: desktop Mobo: ASUSTeK model: P5KPL/EPU v: Rev X.0x
BIOS: American Megatrends v: 0308 date: 03/11/2009
...
CPU: Dual core Intel Core2 Duo E8400
...
Graphics: Card: NVIDIA G98 [GeForce 8400 GS Rev. 2]
et des temps donnés par systemd :
============================= boot-up statistics: =============================
Startup finished in 3.831s (kernel) + 20.650s (userspace) = 24.481s
...
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.1 graphical.target @20.633s
2 multi-user.target @20.633s
Dernière modification par Laurent85 (Le 29/03/2017, à 21:53)
Hors ligne
#43 Le 04/04/2017, à 09:28
- philburgt
Re : [Résolu] Lenteur Ubuntu 16 04
Je pense que ce que tu appelles lenteur n'a rien d'anormal compte tenu de ton matériel
Je me doutais que mon matériel commençait à dater. Juste une dernière question avant d'écrire [résolu],pensez vous que je doive tout changer ou simplement changer des composants?
Dernière modification par philburgt (Le 05/04/2017, à 08:15)
Hors ligne
#44 Le 04/04/2017, à 18:02
- Laurent85
Re : [Résolu] Lenteur Ubuntu 16 04
Tu aurais à changer la carte mère aussi, autant te dire qu'il faut changer d'ordi.
Hors ligne