#1 Le 10/05/2017, à 06:45
- latheon21
[Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Bonjour,
j'ai un nouveau PC que j'ai voulu installer en double boot entre son Windows 10 présent à l'achat et kubuntu 16.04. Ma première installation s'est passé sans problème (avec Grub sur la partition EFI).
Mais... J'ai des instabilités dans le démarrage de kubuntu après la sélection dans grub que je n'arrive pas à comprendre. Toute aide me sera précieuse.
Les symptômes:
- premier plantage: au démarrage, après grub, l'affichage initial (kubuntu en blanc sur fond noir) apparait puis reste gelé... Je tente un redémarrage et là, toujours après grub, écran noir. Il se trouve que j'ai encore la main: après avoir tapé login, mot de passe et reboot, ça redémarre effectivement. En allant en mode dépannage, j'ai essayé de m'en sortir. J'ai remarqué en particulier que le xorg.conf avait disparu de /etc/X11/ Je n'ai pas réussi à le recréer. Après plusieurs tentatives pour comprendre le problème, j'ai réinstallé le système...
- second plantage: même point de départ, écran kubuntu de démarrage puis fond noir, mais j'ai la main. Je reboot, mode dépannage. Là, le xorg.conf est encore absent. Je fais un nvidia-xconfig et cette fois-ci, il marche (erreurs lors du premier plantage). Je redémarre, tout baigne.
- troisième plantage: rebelotte... Je ne suis pas chez moi, ma femme m'a décrit le problème, qui semble identique... Je devrais attendre la fin de semaine pour faire les tests et voir si c'est encore un problème de xorg.conf...
Bref, inutile de dire qu'entre chaque plantage, les démarrages ont fonctionné sans problèmes un certain nombre de fois...
Mes questions:
- quelqu'un peut-il m'expliquer pourquoi le système se vautre de temps en temps au démarrage ? Comment se fait-il qu'une fois que c'est installé comme il faut et que ça marche, tout d'un coup ça déconne ? J'imagine que le système fait tout seul une modif quelque part (une tentative de mise à jour?) qui se plante et me déteriore le système... Y a-t-il moyen de bloquer ça pour qu'il ne change jamais rien au démarrage ? pour que toute modif se passe pendant que je suis connecté et disponible pour dépanner un problème sans bousiller mon démarrage ?
- Est-ce qu'il peut y avoir un rapport avec le fait que ce soit kubuntu et pas ubuntu (unity) ? Si j'installe ubuntu à la place de kubuntu, je crains que le problème soit le même... J'ai raison ?
Mon ordi:
- carte mère MSI avec processeur AMD Ryzen5 1400
- carte graphique Nvidia GeForce GTX 1060
- SSD 180 Go partagé entre windows 10 et le / de linux
- HDD de 1To partagé entre windows 10 (ntfs) et le /home de linux (ext4)
Merci d'avance pour vos conseils
Dernière modification par latheon21 (Le 05/06/2017, à 01:04)
Hors ligne
#2 Le 10/05/2017, à 19:54
- lucmars
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Déjà, Xorg.conf n'est pas dans /etc mais, de mémoire, dans /usr/bin (sinon cherche dans la doc).
Je pense que ta cg pose probleme. À l'affichage du grub tu dois pouvoir passer l'option "nomodeset", t'auras un affichage merdique mais qui te permettra d'installer le pilote proprio de nvidia (si disponible).
Est-ce qu'en mode "essayer" avec ton support live, cela fonctionne pour le moins, car cela pourra être utile afin de diagnostics.
Gaulois Matter !
Hors ligne
#3 Le 10/05/2017, à 22:18
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Merci pour ta réaction, lucmars.
Je ne suis pas un spécialiste de ce qui s'installe sur / , même si je ne suis pas complètement perdu quand je regarde dedans. Je me suis appuyé sur ce que je pouvais trouver dans les forums pour mes premières réparations.
Ma carte graphique n'a pas posé de problème à l'installation. Après l'install et la première mise à jour de tous les paquets, j'avais une faible résolution. En installant nvidia-375, la résolution est devenue optimale et tout se passe bien. Jusqu'à ce que le démarrage se plante.
Comme j'ai dit, au second plantage, nvidia-xconfig a bien remis un xorg.conf dans /etc/X11 et ça a réglé le problème. Il y a eu plusieurs (j'ai pas compté...) redémarrages qui ont parfaitement fonctionnés entre chaque plantage.
Je ne suis pas chez moi cette semaine donc je ne pourrai pas donner de diagnostiques plus précis avant samedi, mais si quelqu'un a une idée de réponse aux questions que j'ai posées ci-dessus, ça m'aiderait à préparer ce que je compte faire pour réparer (ou changer de distrib..)
Merci d'avance.
Hors ligne
#4 Le 14/05/2017, à 14:30
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Je tente à nouveau de comprendre mon problème. Ce troisième plantage ne ressemble pas du tout au second (ni au premier: pas du tout les mêmes erreurs dans les fichiers). Ce que j'ai fait la seconde fois et qui avait permis de rétablir le démarrage ne fonctionne pas du tout maintenant. xorg.conf est présent, nvidia-xconfig marche bien et refait un xorg.conf similaire, etc, etc... Mais toujours cet écran noir et l'accès à une invit invisible (je tape mon login/passwd, puis je peux taper reboot et ça redémarre). Je ne vois pas d'autre solution que de réinstaller...
Je retente ma question:
qu'est-ce qui se passe dans le démarrage qui pourrait expliquer qu'après une install qui a réussi, un fonctionnement sans problème pendant une dizaine de démarrages, tout d'un coup ça ne démarre plus ??
Ce genre d'instabilité n'encourage pas à rester sur ce système...
Merci pour votre attention.
Hors ligne
#5 Le 14/05/2017, à 14:45
- malbo
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Tu as écrit "carte graphique Nvidia GeForce GTX 1600" mais je pense que c'est "GTX 1060". Tu peux confirmer (et rectifier dans le post #1) ?
Hors ligne
#6 Le 14/05/2017, à 15:39
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Oui, bien sûr, désolé pour cette typo...
Hors ligne
#7 Le 15/05/2017, à 09:09
- malbo
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
latheon21 a écrit :
Comment se fait-il qu'une fois que c'est installé comme il faut et que ça marche, tout d'un coup ça déconne ? J'imagine que le système fait tout seul une modif quelque part (une tentative de mise à jour?) qui se plante et me déteriore le système... Y a-t-il moyen de bloquer ça pour qu'il ne change jamais rien au démarrage ? pour que toute modif se passe pendant que je suis connecté et disponible pour dépanner un problème sans bousiller mon démarrage ?
Depuis la version 16.04, le paramétrage par défaut des mises à jour a changé : quand il y a des mises à jour de sécurité, ces mise à jour sont téléchargées et installées automatiquement en arrière plan sans que tu sois informé de rien (voir paramétrage par défaut au début de ce post). Si tu as un ordi poussif comme le mien, tu te rends compte qu'il se passe quelque chose à l'ouverture de session parce que le lancement d'une application est tout mou alors qu'il se fait normalement très rapidement. C'est parce que les mises à jour de sécurité se font en arrière plan comme j'ai dit et que ça pompe les ressources de l'ordi le temps que ces mises à jour soient accomplies..
latheon21 a écrit :
Est-ce qu'il peut y avoir un rapport avec le fait que ce soit kubuntu et pas ubuntu (unity) ? Si j'installe ubuntu à la place de kubuntu, je crains que le problème soit le même... J'ai raison ?
Tu as raison.
Dernière modification par malbo (Le 15/05/2017, à 09:15)
Hors ligne
#8 Le 15/05/2017, à 17:00
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
N'arrivant à rien avec ce troisième plantage, j'ai réinstallé... Mais cette fois-ci Ubuntu 16.04 (pas Kubuntu). Pour l'instant, tout va bien (ça y est, je sens que ça va déconner sous peu !!)... On verra combien de temps ça tient.
En même temps, j'ai pas vraiment envie d'attendre le plantage... Je vais désactiver les mises à jour automatique comme indiqué dans le post que tu pointais.
Merci pour ta réponse !
A suivre...
Hors ligne
#9 Le 15/05/2017, à 17:22
- malbo
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
latheon21 a écrit :
En même temps, j'ai pas vraiment envie d'attendre le plantage... Je vais désactiver les mises à jour automatique comme indiqué dans le post que tu pointais.
En principe, tu devrais avoir une notification comme quoi des mises à jour sont disponibles (puisque tu vas prendre le réglage "Lorsqu’il y a des mises à jour de sécurité : Afficher immédiatement"). Donne des nouvelles pour dire si au moins tu es notifié comme ça devrait...
Dernière modification par malbo (Le 15/05/2017, à 17:24)
Hors ligne
#10 Le 15/05/2017, à 17:42
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Ok, je tiendrai au courant.
Au fait, j'ai oublié: en réponse au message de lucmars, j'avais essayé de rajouter le nomodeset au moment de grub (e avant que ça ne démarre, je descends sur la ligne " linux /boot/(...) quiet splash $vt_handoff " et je tape nomodeset à la fin de la ligne, puis je lance le boot), ça ne changeait rien à mon écran obstinément noir... Mon pilote propriétaire nvidia-375 était installé et fonctionnel avant les plantages.
Autre point, sur cette install (ubuntu), j'ai vérifié: pas de trace de xorg.conf dans /etc/X11, donc ça n'avait rien à voir ? Je ne comprends pas du coup comment je suis sorti indemne de mon deuxième plantage... Hummm....
Si ça venait bien des mises à jour de sécurité, est-ce qu'il y a un endroit où on peut voir les jours où de telles mises à jour ont été diffusées ? Pour voir s'il y a corrélation avec mes plantages...
Merci !
Dernière modification par latheon21 (Le 15/05/2017, à 17:43)
Hors ligne
#11 Le 15/05/2017, à 18:44
- malbo
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Si lucmars t'a conseillé de rajouter le nomodeset, c'est parce qu'il ignorait que tu avais déjà installé auparavant le pilote propriétaire nvidia-375. Quand le pilote propriétaire est installé, il ne faut plus utiliser nomodeset.
latheon21 a écrit :
Si ça venait bien des mises à jour de sécurité, est-ce qu'il y a un endroit où on peut voir les jours où de telles mises à jour ont été diffusées ? Pour voir s'il y a corrélation avec mes plantages...
Je ne sais pas répondre à ça.
Hors ligne
#12 Le 20/05/2017, à 15:42
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
bon, après presque une semaine de bonheur, le problème est revenu.
Quand je boot en recovery mode, je peux avoir accès à la ligne de commande et comprendre un peu plus. Pour info, j'ai fait des mises à jour ce matin via le gestionnaire (en le lançant moi même, il ne m'indiquait rien tout seul). J'en avais fait jeudi aussi, via synaptic.
Cet après-midi, de nouveau, bloqué sur une écran violet avec ubuntu écrit au milieu.... En tapant mon login, mot de passe puis reboot, ça redémarre et je peux passer en recovery mode.
Là, je mets en place le réseau, puis je fais un dpkg. Il y a un paquet à télécharger... Je dis ok mais ça ne marche pas.
Je passe alors en admin.
apt update => un paquet à mettre à jour.
apt full-upgrade => cherche à mettre à jour unattended-upgrades
N'arrive pas à le télécharger.
Message:
Err:1 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main i386 unattended-upgrades all 0.9ubuntu0.6
Erreur temporaire de résolution de " fr.archive.ubuntu.com "
Fin du bal, totalement bloqué, impossible de booter.
Bref...
Une idée de solution ?
Comment je vire cette putain de mise à jour de merde qui me pourrit la vie ?
Merci d'avance
Hors ligne
#13 Le 20/05/2017, à 18:55
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
J'ai essayé de bloquer la mise à jour de unattended-upgrades, via dpkg.
J'ai modifié /etc/apt/apt.conf.d/50unattended-upgrades pour commenter toute mise à jour automatique.
Rien à faire...
J'ai essayé de démarrer en failsafeX... Il a râlé qu'il n'y avait pas de /etc/X11/xorg.conf ... (cf plus haut...) J'ai fait un nvidia-xconfig qui lui en a fait un sans broncher. Malgré cela, pas moyen d'avoir autre chose qu'un écran noir...
J'ai finalement carrément fait un apt purge unattended-upgrades et je l'ai marqué en hold. Bon, il n'avait plus besoin d'aucune mise à jour (en recovery mode toujours). Mais démarrage normal toujours bloqué sur écran noir.
J'ai essayé de faire un bisnext mais il m'a mis le même type d'erreur à l'apt install que quand il voulait mettre à jour unattended-upgrades (cf post juste au-dessus)...
Du coup, j'ai lancé une session live à partir du cd et j'ai pu avoir le bisnext:
https://paste.debian.net/933369
Il y a des passages des logs... Pour info, à 9:17, je me suis loggé sans problème, mais il m'annoncait un problème logiciel. Je crois me souvenir que j'ai fait une mise à jour avec le gestionnaire (il n'annonçait rien), puis j'ai rebooté pour voir. Redémarrage sans problème (ça doit être 9:24) mais toujours problème logiciel.
Finalement, 15:09... Je ne sais pas si ça correspond à l'heure de la première tentative de démarrage qui a échoué ou si c'est l'heure à laquelle j'ai démarré en recovery mode.
Bref, je sais pas si ça aide, mais en attendant, je vais sans doute réinstaller et totalement éradiquer toute mise à jour a posteriori, histoire de voir si ça vient vraiment de là ou bien d'une opération du saint esprit pour me punir de je ne sais quel outrage...
Hors ligne
#14 Le 21/05/2017, à 06:16
- malbo
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Ton rapport Bisnext est là :
Posting 933369 from bn-db4fe posted at 2017-05-20 16:21:46 expires: 2017-06-19 16:21:46
May 20, 2017, bisnext report id db4fe
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.8.0-36-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine: Device: desktop Mobo: MSI model: B350M GAMING PRO (MS-7A39) v: 1.0
UEFI: American Megatrends v: 2.40 date: 04/10/2017
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Quad core AMD Ryzen 5 1400 (-HT-MCP-) cache: 2048 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 25600
clock speeds: min/max: 1550/3200 MHz 1: 1550 MHz 2: 1550 MHz
3: 1550 MHz 4: 1550 MHz 5: 1550 MHz 6: 1550 MHz 7: 1550 MHz
8: 1550 MHz
Memory: Array-1 capacity: 16 GB devices: 2 EC: None
Device-1: DIMM 0 size: 8 GB speed: 1067 MHz type: DDR4
manufacturer: N/A part: F4-2400C15-8GVR
Device-2: DIMM 0 size: 8 GB speed: 1067 MHz type: DDR4
manufacturer: N/A part: F4-2400C15-8GVR
Graphics: Card: NVIDIA Device 1c02 bus-ID: 22:00.0 chip-ID: 10de:1c02
Display Server: X.Org 1.18.4 drivers: fbdev (unloaded: modesetting,vesa) FAILED: nouveau
tty size: 1280x1024@77.00hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.8, 128 bits)
GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
Audio: Card-1 Advanced Micro Devices [AMD] Device 1457
driver: snd_hda_intel bus-ID: 24:00.3 chip-ID: 1022:1457
Card-2 NVIDIA Device 10f1
driver: snd_hda_intel bus-ID: 22:00.1 chip-ID: 10de:10f1
Sound: Advanced Linux Sound Architecture v: k4.8.0-36-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: f000
bus-ID: 1e:00.0 chip-ID: 10ec:8168
IF: enp30s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1180.3GB (0.2% used)
ID-1: /dev/sda model: INTEL_SSDSC2KW18 size: 180.0GB
ID-2: /dev/sdb model: WDC_WD10EZEX size: 1000.2GB
Optical: /dev/sr0 model: N/A
rev: N/A dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 125x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: N/A
Partition: ID-1: swap-1 size: 2.00GB used: 0.00GB (0%) fs: swap dev: /dev/sda4
label: N/A uuid: c351b88e-721b-4aea-9cd9-964647a560c3
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/ram0 size: 0.07G label: N/A uuid: N/A
ID-2: /dev/ram1 size: 0.07G label: N/A uuid: N/A
ID-3: /dev/ram2 size: 0.07G label: N/A uuid: N/A
ID-4: /dev/ram3 size: 0.07G label: N/A uuid: N/A
ID-5: /dev/ram4 size: 0.07G label: N/A uuid: N/A
ID-6: /dev/ram5 size: 0.07G label: N/A uuid: N/A
ID-7: /dev/ram6 size: 0.07G label: N/A uuid: N/A
ID-8: /dev/ram7 size: 0.07G label: N/A uuid: N/A
ID-9: /dev/ram8 size: 0.07G label: N/A uuid: N/A
ID-10: /dev/ram9 size: 0.07G label: N/A uuid: N/A
ID-11: /dev/ram10 size: 0.07G label: N/A uuid: N/A
ID-12: /dev/ram11 size: 0.07G label: N/A uuid: N/A
ID-13: /dev/ram12 size: 0.07G label: N/A uuid: N/A
ID-14: /dev/ram13 size: 0.07G label: N/A uuid: N/A
ID-15: /dev/ram14 size: 0.07G label: N/A uuid: N/A
ID-16: /dev/ram15 size: 0.07G label: N/A uuid: N/A
ID-17: /dev/sda1 size: 0.52G
fs: FAT (32 bit) label: BOOT uuid: 1E39-18FC
ID-18: /dev/sda2 size: 0.13G label: N/A uuid: N/A
ID-19: /dev/sda3 size: 155.27G
fs: NTFS label: SSD uuid: B2703C99703C65EF
ID-20: /dev/sda5 size: 22.12G
fs: ext4 label: N/A uuid: a69272ba-2871-4974-b3c4-df7e1eb382ee
ID-21: /dev/sdb1 size: 916.32G
fs: NTFS label: HDD uuid: 845828B35828A640
ID-22: /dev/sdb2 size: 83.89G
fs: ext4 label: N/A uuid: 20ae83b3-36f8-4216-b242-ee06dba38546
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb cdrom:[Ubuntu 16.04.2 LTS _Xenial Xerus_ - Release amd64 (20170215.2)]/ xenial main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu/ xenial main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu/ xenial-updates main restricted universe multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 11.0% command: compiz pid: 2448 mem: 241.18MB (1.5%)
2: cpu: 1.2% command: Xorg pid: 1675 mem: 93.59MB (0.5%)
3: cpu: 0.9% command: init pid: 1 mem: 5.79MB (0.0%)
4: cpu: 0.4% command: bash pid: 5539 mem: 4.45MB (0.0%)
5: cpu: 0.3% command: gnome-terminal-server pid: 3039 mem: 34.32MB (0.2%)
6: cpu: 0.3% command: nautilus pid: 2707 mem: 44.98MB (0.2%)
7: cpu: 0.1% command: unity-scope-loader pid: 2981 mem: 23.52MB (0.1%)
8: cpu: 0.1% command: ibus-ui-gtk3 pid: 2414 mem: 49.66MB (0.3%)
9: cpu: 0.1% command: hud-service pid: 2398 mem: 34.40MB (0.2%)
10: cpu: 0.1% command: unity-panel-service pid: 2396 mem: 52.50MB (0.3%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 241.18MB (1.5%) command: compiz pid: 2448 cpu: 11.0%
2: mem: 93.59MB (0.5%) command: Xorg pid: 1675 cpu: 1.2%
3: mem: 58.38MB (0.3%) command: evolution-calendar-factory pid: 2795 cpu: 0.0%
4: mem: 52.50MB (0.3%) command: unity-panel-service pid: 2396 cpu: 0.1%
5: mem: 50.94MB (0.3%) command: evolution-calendar-factory-subprocess pid: 2837 cpu: 0.0%
6: mem: 50.86MB (0.3%) command: unity-settings-daemon pid: 2377 cpu: 0.1%
7: mem: 49.66MB (0.3%) command: ibus-ui-gtk3 pid: 2414 cpu: 0.1%
8: mem: 48.65MB (0.3%) command: evolution-calendar-factory-subprocess pid: 2825 cpu: 0.0%
9: mem: 46.46MB (0.2%) command: bamfdaemon pid: 2378 cpu: 0.0%
10: mem: 44.98MB (0.2%) command: nautilus pid: 2707 cpu: 0.3%
Info: Processes: 255 Uptime: 9 min Memory: 839.2/16037.0MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0006
Timeout: 2 seconds
BootOrder: 0006,0004,0000,0005,0002,0001
Boot0000* Windows Boot Manager HD(1,GPT,4155b90c-010e-4591-96ed-79613dd91be4,0x800,0xf9800)/File(\EFI\MICROSOFT\BOOT\BOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* Hard Drive BBS(HD,,0x0)/VenHw(5ce8128b-2cec-40f0-8372-80640e3dc858,0200)..GO..NO..........I.N.T.E.L. .S.S.D.S.C.2.K.W.1.8.0.H.6...................\.,.@.r.d.=.X..........A.................................>..Gd-.;.A..MQ..L.V.C.T.L.2.6.5.6.2.0.J.Q.8.1.B.0.N.G. . ........BO..NO..........W.D.C. .W.D.1.0.E.Z.E.X.-.0.8.W.N.4.A.0...................\.,.@.r.d.=.X..........A.................................>..Gd-.;.A..MQ..L. . . . .W. .-.D.C.W.6.C.5.Y.X.F.1.A.L.A........BO
Boot0002* CD/DVD Drive BBS(CDROM,,0x0)/VenHw(5ce8128b-2cec-40f0-8372-80640e3dc858,0300)..GO..NO..........D.R.W.-.2.4.D.5.M.T...................\.,.@.r.d.=.X..........A.................................>..Gd-.;.A..MQ..L.3.K.G.C.Q.6.2.9.5.0. .4. . . . . . . . ........BO
Boot0004* ubuntu HD(1,GPT,4155b90c-010e-4591-96ed-79613dd91be4,0x800,0xf9800)/File(\EFI\UBUNTU\SHIMX64.EFI)..BO
Boot0005* UEFI: PXE IP4 Realtek PCIe GBE Family Controller PciRoot(0x0)/Pci(0x1,0x3)/Pci(0x0,0x2)/Pci(0x4,0x0)/Pci(0x0,0x0)/MAC(4ccc6afcd84b,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)..BO
Boot0006* UEFI: DRW-24D5MT PciRoot(0x0)/Pci(0x1,0x3)/Pci(0x0,0x1)/Sata(4,65535,0)/CDROM(1,0xe18,0x1300)..BO
vfat partition details:
/dev/sda1: LABEL="BOOT" UUID="1E39-18FC" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="4155b90c-010e-4591-96ed-79613dd91be4"
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
/dev/sda1@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
/dev/sda5:Ubuntu 16.04.2 LTS (16.04):Ubuntu:linux
_____________________________ md5sum of EFI files _____________________________
EFI files in /dev/sda1:\n1650105fea8c992858d224d8f546b3d2 /EFI/Microsoft/Boot/memtest.efi
34a5c2687e10f4cad35391d68ff32a6c /EFI/ubuntu/grubx64.efi
3aef9c72ad50faa8db576c01f85a0915 /EFI/ubuntu/shimx64.efi
61c7898dd613614b15cee0081226572c /EFI/ubuntu/fbx64.efi
7e5846c5c982a2037ae885d96f1163d3 /EFI/Boot/bootx64.efi
7e5846c5c982a2037ae885d96f1163d3 /EFI/Microsoft/Boot/bootmgfw.efi
bf39cf9416a9403d40a9b69541486e74 /EFI/ubuntu/mmx64.efi
d73bbea8b6c047d2a706472f87d3ccdb /EFI/ubuntu/fwupx64.efi
e46ce79ec4662e061924f9a9e31ab4c3 /EFI/Microsoft/Boot/bootmgr.efi\n\n
========================= Boot Information Details ============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi /EFI/Boot/bootx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi /EFI/ubuntu/mmx64.efi
/EFI/ubuntu/fbx64.efi
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /Windows/System32/winload.exe
sda4: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disk /dev/sda: 167.7 GiB, 180045766656 bytes, 351651888 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 351,651,887 351,651,887 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,023,999 1,021,952 EFI System partition
/dev/sda2 1,024,000 1,286,143 262,144 Microsoft Reserved Partition (Windows)
/dev/sda3 1,286,144 304,547,839 303,261,696 Data partition (Windows/Linux)
/dev/sda4 347,746,304 351,649,791 3,903,488 Swap partition (Linux)
/dev/sda5 304,547,840 347,745,105 43,197,266 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 1,789,683,711 1,789,681,664 Data partition (Windows/Linux)
/dev/sdb2 1,789,683,712 1,953,523,711 163,840,000 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 1E39-18FC vfat BOOT
/dev/sda2
/dev/sda3 B2703C99703C65EF ntfs SSD
/dev/sda4 c351b88e-721b-4aea-9cd9-964647a560c3 swap
/dev/sda5 a69272ba-2871-4974-b3c4-df7e1eb382ee ext4
/dev/sdb1 845828B35828A640 ntfs HDD
/dev/sdb2 20ae83b3-36f8-4216-b242-ee06dba38546 ext4
/dev/sr0 2017-02-15-21-44-13-00 iso9660 Ubuntu 16.04.2 LTS amd64
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 May 20 16:12 ata-DRW-24D5MT_K3CG6Q92054 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 20 16:12 ata-INTEL_SSDSC2KW180H6_CVLT626502QJ180BGN -> ../../sda
lrwxrwxrwx 1 root root 10 May 20 16:13 ata-INTEL_SSDSC2KW180H6_CVLT626502QJ180BGN-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 20 16:13 ata-INTEL_SSDSC2KW180H6_CVLT626502QJ180BGN-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 20 16:13 ata-INTEL_SSDSC2KW180H6_CVLT626502QJ180BGN-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 May 20 16:13 ata-INTEL_SSDSC2KW180H6_CVLT626502QJ180BGN-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 May 20 16:13 ata-INTEL_SSDSC2KW180H6_CVLT626502QJ180BGN-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 May 20 16:12 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y5FXA1AL -> ../../sdb
lrwxrwxrwx 1 root root 10 May 20 16:13 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y5FXA1AL-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 May 20 16:13 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y5FXA1AL-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 May 20 16:13 usb-HP_Photosmart_8100_MY53F2N0DT0486-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 9 May 20 16:12 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 20 16:12 wwn-0x50014ee2b9047064 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 20 16:13 wwn-0x50014ee2b9047064-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 May 20 16:13 wwn-0x50014ee2b9047064-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 May 20 16:12 wwn-0x55cd2e414d0b354f -> ../../sda
lrwxrwxrwx 1 root root 10 May 20 16:13 wwn-0x55cd2e414d0b354f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 20 16:13 wwn-0x55cd2e414d0b354f-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 20 16:13 wwn-0x55cd2e414d0b354f-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 May 20 16:13 wwn-0x55cd2e414d0b354f-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 May 20 16:13 wwn-0x55cd2e414d0b354f-part5 -> ../../sda5
_________________________ "ls -R /dev/mapper/" output _________________________
None
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
__________________________=== Boot Files Content ===___________________________
___________________________ sda5/boot/grub/grub.cfg: ___________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-a69272ba-2871-4974-b3c4-df7e1eb382ee' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 a69272ba-2871-4974-b3c4-df7e1eb382ee
else
search --no-floppy --fs-uuid --set=root a69272ba-2871-4974-b3c4-df7e1eb382ee
fi
linux /boot/vmlinuz-4.8.0-52-generic.efi.signed root=UUID=a69272ba-2871-4974-b3c4-df7e1eb382ee ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-52-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-1E39-18FC' {
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 1E39-18FC
else
search --no-floppy --fs-uuid --set=root 1E39-18FC
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda5/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=a69272ba-2871-4974-b3c4-df7e1eb382ee / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=1E39-18FC /boot/efi vfat umask=0077 0 1
# /home was on /dev/sdb2 during installation
UUID=20ae83b3-36f8-4216-b242-ee06dba38546 /home ext4 defaults 0 2
# /winfiles was on /dev/sdb1 during installation
UUID=845828B35828A640 /winfiles ntfs defaults,umask=007,gid=46 0 0
# swap was on /dev/sda4 during installation
UUID=c351b88e-721b-4aea-9cd9-964647a560c3 none swap sw 0 0
____________________________ sda5/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
_________ Devices which don't seem to have a corresponding hard drive: _________
sdc
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
______________________________ Boot-up Statistics ______________________________
Startup finished in 37.640s (firmware) + 14.784s (loader) + 45.914s (kernel) + 59.355s (userspace) = 2min 37.695s
blame, first 10:
dev-sda4.device 59.457s
dev-sr0.device 58.050s
dev-loop0.device 58.040s
snapd.autoimport.service 41.907s
udev-configure-printer@-devices-pci0000:00-0000:00:01.3-0000:03:00.0-usb1-1\x2d6-1\x2d6.2.service 39.857s
NetworkManager.service 35.023s
ModemManager.service 34.873s
accounts-daemon.service 28.361s
thermald.service 21.608s
rsyslog.service 18.953s
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @59.305s
2 multi-user.target @59.305s
3 getty.target @52.000s
4 getty@tty1.service @51.999s
5 rc-local.service @51.993s +2ms
6 network.target @51.973s
7 NetworkManager.service @16.949s +35.023s
8 dbus.service @15.339s
9 basic.target @15.338s
10 sockets.target @15.338s
11 snapd.socket @15.319s +18ms
12 sysinit.target @15.318s
13 apparmor.service @8.931s +6.386s
14 local-fs.target @8.931s
15 tmp.mount @8.924s +5ms
16 local-fs-pre.target @8.924s
17 lvm2-monitor.service @1.330s +7.187s
18 lvm2-lvmetad.service @7.685s
19 system.slice @1.295s
20 -.slice @1.293s
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 15G 704M 13G 203M 1.3G 14G
Swap: 1.9G 0B 1.9G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
aufs / aufs 7.9G 188M 7.7G 3% 1%
/dev/loop0 /rofs squashfs 1.4G 1.4G 0 100% 100%
/dev/sda5 /tmp/bisnext-UBRZB5Xy/mnt/sda5 ext4 21G 5.6G 14G 30% 18%
/dev/sr0 /cdrom iso9660 1.5G 1.5G 0 100% -
_________________________________ USB devices __________________________________
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 03f0:0941 Hewlett-Packard
Bus 001 Device 004: ID 03f0:ba02 Hewlett-Packard PhotoSmart 8100 series
Bus 001 Device 003: ID 046a:b090 Cherry GmbH
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/10p, 480M
|__ Port 6: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 4, If 1, Class=Vendor Specific Class, Driver=, 12M
|__ Port 2: Dev 4, If 2, Class=Mass Storage, Driver=usb-storage, 12M
|__ Port 2: Dev 4, If 0, Class=Printer, Driver=usblp, 12M
|__ Port 4: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
_______________________________ Wireless Status _______________________________
None
___________________________________ Modules Loaded ____________________________
Module Size Used by
8250_dw 16384 0
ablk_helper 16384 1 aesni_intel
aesni_intel 167936 0
aes_x86_64 20480 1 aesni_intel
ahci 36864 3
aufs 241664 4836
autofs4 40960 2
btrfs 1056768 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 24576 3 ablk_helper,ghash_clmulni_intel,aesni_intel
dm_log 20480 2 dm_mirror,dm_region_hash
dm_mirror 24576 0
dm_region_hash 24576 1 dm_mirror
drm 368640 3 nouveau,ttm,drm_kms_helper
drm_kms_helper 167936 1 nouveau
fb_sys_fops 16384 1 drm_kms_helper
fjes 28672 0
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
gpio_amdpt 16384 0
gpio_generic 16384 1 gpio_amdpt
hfs 57344 0
hfsplus 106496 0
hid 122880 2 hid_generic,usbhid
hid_generic 16384 0
i2c_algo_bit 16384 1 nouveau
i2c_designware_core 20480 1 i2c_designware_platform
i2c_designware_platform 16384 0
i2c_piix4 24576 0
input_leds 16384 0
irqbypass 16384 1 kvm
isofs 40960 1
jfs 184320 0
kvm 598016 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
lrw 16384 1 aesni_intel
mac_hid 16384 0
mii 16384 1 r8169
minix 40960 0
msdos 20480 0
mxm_wmi 16384 1 nouveau
nls_iso8859_1 16384 0
nls_utf8 16384 1
nouveau 1572864 0
ntfs 102400 0
parport 49152 3 lp,parport_pc,ppdev
parport_pc 32768 1
ppdev 20480 0
psmouse 139264 0
qnx4 16384 0
r8169 81920 0
raid6_pq 102400 1 btrfs
serio_raw 16384 0
shpchp 36864 0
snd 86016 21 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
snd_hda_codec 135168 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 45056 1
snd_hda_codec_realtek 86016 1
snd_hda_core 86016 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel 36864 5
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 110592 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
soundcore 16384 1 snd
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
ttm 102400 1 nouveau
uas 24576 0
ufs 73728 0
usbhid 53248 0
usblp 20480 0
usb_storage 73728 1 uas
video 40960 1 nouveau
wmi 16384 2 mxm_wmi,nouveau
xfs 1048576 0
xor 24576 1 btrfs
______________________________ Additional Drivers _____________________________
== cpu-microcode.py ==
driver : amd64-microcode - distro non-free
== /sys/devices/pci0000:00/0000:00:03.1/0000:22:00.0 ==
modalias : pci:v000010DEd00001C02sv00001462sd00008C95bc03sc00i00
vendor : NVIDIA Corporation
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-375 - distro non-free recommended
__________________________________ Locales ___________________________________
locale command output:
LANG=en_US.UTF-8
LANGUAGE=
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
/etc/default/locale:
LANG="en_US.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="us"
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
Live Session
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 212 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic-hwe-16.04 4.8.0.36.8
linux-headers-4.8.0-36 4.8.0-36.36~16.04.1
linux-headers-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-headers-generic-hwe-16.04 4.8.0.36.8
linux-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-generic-hwe-16.04 4.8.0.36.8
linux-signed-generic-hwe-16.04 4.8.0.36.8
linux-signed-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-signed-image-generic-hwe-16.04 4.8.0.36.8
File list in /boot directory:
abi-4.8.0-36-generic
config-4.8.0-36-generic
grub
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.8.0-36-generic
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xdd01d000 ACPI=0xdd01d000 SMBIOS=0xde259000 ESRT=0xd9489b98 MEMATTR=0xd9416018
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160422/tbfadt-658)
[ 0.000000] ACPI: UEFI 0x00000000DD02F2F0 000042 (v01 00000000 00000000)
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.027040] efi_bgrt: Ignoring BGRT: Incorrect BMP magic number 0x0 (expected 0x4d42)
[ 0.425587] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.431356] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.436782] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.474752] SCSI subsystem initialized
[ 0.513327] pci 0000:04:06.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.513330] pci 0000:04:06.0: BAR 13: failed to assign [io size 0x1000]
[ 0.513332] pci 0000:04:06.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.513334] pci 0000:04:06.0: BAR 13: failed to assign [io size 0x1000]
[ 4.404114] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 5.428037] pciehp 0000:04:06.0:pcie204: Timeout on hotplug command 0x13f1 (issued 1024 msec ago)
[ 6.452038] pciehp 0000:04:06.0:pcie204: Timeout on hotplug command 0x17f1 (issued 1024 msec ago)
[ 6.452123] efifb: probing for efifb
[ 6.452146] efifb: framebuffer at 0xf1000000, using 5120k, total 5120k
[ 6.452147] efifb: mode is 1280x1024x32, linelength=5120, pages=1
[ 6.452147] efifb: scrolling: redraw
[ 6.452148] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 6.456060] fb0: EFI VGA frame buffer device
[ 6.541680] EFI Variables Facility v0.08 2004-May-17
[ 6.563377] WARNING: CPU: 6 PID: 1 at /build/linux-hwe-eyfT8D/linux-hwe-4.8.0/lib/kobject.c:210 kobject_add_internal+0x26c/0x330
[ 6.563419] kobject_create_and_add: kobject_add error: -22
[ 6.635126] scsi host0: ahci
[ 6.635204] scsi host1: ahci
[ 6.635265] scsi host2: ahci
[ 6.635320] scsi host3: ahci
[ 6.635376] scsi host4: ahci
[ 6.635435] scsi host5: ahci
[ 6.635496] scsi host6: ahci
[ 6.635555] scsi host7: ahci
[ 6.635952] scsi host8: ahci
[ 6.659154] nouveau: probe of 0000:22:00.0 failed with error -12
[ 6.951826] ata9: SATA link down (SStatus 0 SControl 300)
[ 7.112004] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7.113346] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2KW18 036C PQ: 0 ANSI: 5
[ 7.143949] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.143958] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB)
[ 7.145349] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.620006] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7.621433] scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[ 7.652158] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 7.652166] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 7.697754] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 8.123999] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.129943] scsi 4:0:0:0: CD-ROM ASUS DRW-24D5MT 1.00 PQ: 0 ANSI: 5
[ 8.147989] sr 4:0:0:0: [sr0] scsi3-mmc drive: 47x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 8.148131] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 8.148189] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 8.309986] scsi host9: usb-storage 1-6.2:1.2
[ 8.463409] ata6: SATA link down (SStatus 0 SControl 300)
[ 9.338023] scsi 9:0:0:0: Direct-Access HP Photosmart 8100 1.00 PQ: 0 ANSI: 2
[ 9.338285] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 9.340029] sd 9:0:0:0: [sdc] Attached SCSI removable disk
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ PixArt HP X500 USB Optical Mouse id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ Cherry USB keyboard id=8 [slave keyboard (3)]
↳ Cherry USB keyboard id=9 [slave keyboard (3)]
xrandr:
Screen 0: minimum 1280 x 1024, current 1280 x 1024, maximum 1280 x 1024
default connected primary 1280x1024+0+0 0mm x 0mm
1280x1024 77.00*
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 103.450] (==) No Layout section. Using the first Screen section.
[ 103.450] (==) No screen section available. Using defaults.
[ 103.450] (**) |-->Screen "Default Screen Section" (0)
[ 103.450] (**) | |-->Monitor "<default monitor>"
[ 103.450] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 105.569] (--) PCI:*(0:34:0:0) 10de:1c02:1462:8c95 rev 161, Mem @ 0xfc000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 105.569] (II) LoadModule: "glx"
[ 105.571] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 111.299] (II) LoadModule: "nvidia"
[ 111.301] (WW) Warning, couldn't open module nvidia
[ 111.301] (II) UnloadModule: "nvidia"
[ 111.301] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 111.301] (II) LoadModule: "nouveau"
[ 111.302] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 111.692] (II) LoadModule: "modesetting"
[ 111.693] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 111.694] (II) LoadModule: "fbdev"
[ 111.694] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 112.125] (II) LoadModule: "vesa"
[ 112.125] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 112.126] (II) LoadModule: "nvidia"
[ 112.126] (WW) Warning, couldn't open module nvidia
[ 112.126] (II) UnloadModule: "nvidia"
[ 112.126] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 112.126] (II) LoadModule: "nouveau"
[ 112.126] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 112.126] (II) UnloadModule: "nouveau"
[ 112.126] (II) LoadModule: "modesetting"
[ 112.126] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 112.126] (II) UnloadModule: "modesetting"
[ 112.126] (II) LoadModule: "fbdev"
[ 112.126] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 112.126] (II) UnloadModule: "fbdev"
[ 112.126] (II) LoadModule: "vesa"
[ 112.127] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 112.127] (II) UnloadModule: "vesa"
[ 112.251] (EE) [drm] Failed to open DRM device for pci:0000:22:00.0: -19
[ 112.371] (EE) [drm] Failed to open DRM device for pci:0000:22:00.0: -19
[ 112.371] (EE) open /dev/dri/card0: No such file or directory
[ 112.371] (EE) open /dev/dri/card0: No such file or directory
[ 112.371] (WW) Falling back to old probe method for modesetting
[ 112.371] (EE) open /dev/dri/card0: No such file or directory
[ 112.371] (EE) open /dev/dri/card0: No such file or directory
[ 112.371] (II) Loading sub module "fbdevhw"
[ 112.371] (II) LoadModule: "fbdevhw"
[ 112.371] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 112.628] (WW) Falling back to old probe method for vesa
[ 112.628] (EE) Screen 0 deleted because of no matching config section.
[ 112.628] (II) UnloadModule: "modesetting"
[ 112.628] (EE) Screen 0 deleted because of no matching config section.
[ 112.628] (II) UnloadModule: "modesetting"
[ 112.629] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 112.629] (II) FBDEV(0): checking modes against monitor...
[ 112.629] (II) Loading sub module "fb"
[ 112.629] (II) LoadModule: "fb"
[ 112.629] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 112.740] (II) Loading sub module "shadow"
[ 112.740] (II) LoadModule: "shadow"
[ 112.740] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 112.741] (II) UnloadModule: "vesa"
[ 112.742] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[ 113.135] (II) AIGLX: Screen 0 is not DRI2 capable
[ 113.135] (EE) AIGLX: reverting to software rendering
[ 123.011] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 124.199] (II) LoadModule: "evdev"
[ 124.199] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 124.371] (WW) config/udev: device PixArt HP X500 USB Optical Mouse already added. Ignoring.
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-36-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-36-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? no
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? yes
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 10de:1c02
BusID "PCI:34@0:0:0"
Is boot vga? yes
Error: can't access /sys/bus/pci/devices/0000:22:00.0/driver
The device is not bound to any driver. Skipping...
Error : Failed to open /dev/dri
Error : Failed to open /dev/dri
Error : Failed to open /dev/dri
Error : Failed to open /dev/dri
Does it require offloading? no
I couldn't open /var/lib/ubuntu-drivers-common/last_gfx_boot for reading.
Create /var/lib/ubuntu-drivers-common/last_gfx_boot for the 1st time
last cards number = 1
Has amd? no
Has intel? no
Has nvidia? no
How many cards? 0
The number of cards has changed!
Has the system changed? Yes
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
System configuration has changed
==============================================================================
# System Information for Ubuntu 16.04.2 LTS in /dev/sda5
==============================================================================
_____________________________ Upgradable Packages _____________________________
None
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
__________________ Configuration files of uninstalled packages: ________________
Package Version
linux-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-36-generic 4.8.0-36.36~16.04.1
snap-confine 2.25
Use the following command to clean old configuration files:
sudo apt purge linux-image-4.8.0-36-generic linux-image-extra-4.8.0-36-generic snap-confine
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic-hwe-16.04 4.8.0.52.23
linux-headers-4.8.0-51 4.8.0-51.54~16.04.1
linux-headers-4.8.0-51-generic 4.8.0-51.54~16.04.1
linux-headers-4.8.0-52 4.8.0-52.55~16.04.1
linux-headers-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-headers-generic-hwe-16.04 4.8.0.52.23
linux-image-4.8.0-51-generic 4.8.0-51.54~16.04.1
linux-image-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-image-extra-4.8.0-51-generic 4.8.0-51.54~16.04.1
linux-image-extra-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-image-generic-hwe-16.04 4.8.0.52.23
linux-signed-generic-hwe-16.04 4.8.0.52.23
linux-signed-image-4.8.0-51-generic 4.8.0-51.54~16.04.1
linux-signed-image-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-signed-image-generic-hwe-16.04 4.8.0.52.23
File list in /boot directory:
abi-4.8.0-51-generic
abi-4.8.0-52-generic
config-4.8.0-51-generic
config-4.8.0-52-generic
efi
grub
initrd.img-4.8.0-51-generic
initrd.img-4.8.0-52-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.8.0-51-generic
System.map-4.8.0-52-generic
vmlinuz-4.8.0-51-generic
vmlinuz-4.8.0-51-generic.efi.signed
vmlinuz-4.8.0-52-generic
vmlinuz-4.8.0-52-generic.efi.signed
__________________________________ Locales ___________________________________
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="nodeadkeys"
XKBOPTIONS=""
BACKSPACE="guess"
_________________________________ System Logs ________________________________
Selection of relevent log entries:
May 20 09:17:01 Tyrion CRON[2802]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 20 09:17:13 Tyrion com.canonical.Unity.Scope.Applications[1209]: Error loading package indexes: Couldn't stat '/var/cache/software-center/xapian'
May 20 09:17:13 Tyrion com.canonical.Unity.Scope.Applications[1209]: (unity-scope-loader:2816): unity-applications-daemon-CRITICAL **: daemon.vala:144: Failed to load Software Center index. 'Apps Available for Download' will not be listed
May 20 09:17:52 Tyrion org.debian.apt[877]: /usr/lib/python3/dist-packages/aptdaemon/progress.py:491: Warning: Source ID 88 was not found when attempting to remove it
May 20 09:17:52 Tyrion org.debian.apt[877]: /usr/lib/python3/dist-packages/aptdaemon/progress.py:491: Warning: Source ID 89 was not found when attempting to remove it
May 20 09:18:09 Tyrion gnome-session[1521]: gnome-session-binary[1521]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:18:09 Tyrion gnome-session-binary[1521]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:18:09 Tyrion gnome-session-binary[1521]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:18:09 Tyrion gnome-session[1521]: gnome-session-binary[1521]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:18:09 Tyrion gnome-session[1521]: gnome-session-binary[1521]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:18:09 Tyrion gnome-session-binary[1521]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:18:09 Tyrion gnome-session[1521]: gnome-session-binary[1521]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:18:09 Tyrion gnome-session[1521]: gnome-session-binary[1521]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:18:09 Tyrion gnome-session-binary[1521]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:18:09 Tyrion gnome-session[1521]: gnome-session-binary[1521]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:18:09 Tyrion gnome-session-binary[1521]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:18:09 Tyrion gnome-session-binary[1521]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:18:09 Tyrion systemd[1]: Closed Load/Save RF Kill Switch Status /dev/rfkill Watch.
May 20 09:18:09 Tyrion NetworkManager[910]: <warn> [1495264689.6261] error requesting auth for org.freedesktop.NetworkManager.reload: Authorization check failed: Message recipient disconnected from message bus without replying
May 20 09:18:09 Tyrion NetworkManager[910]: <warn> [1495264689.6262] error requesting auth for org.freedesktop.NetworkManager.settings.modify.hostname: Authorization check failed: Message recipient disconnected from message bus without replying
May 20 09:18:09 Tyrion NetworkManager[910]: <warn> [1495264689.6262] error requesting auth for org.freedesktop.NetworkManager.settings.modify.own: Authorization check failed: Message recipient disconnected from message bus without replying
May 20 09:18:09 Tyrion NetworkManager[910]: <warn> [1495264689.6262] error requesting auth for org.freedesktop.NetworkManager.settings.modify.system: Authorization check failed: Message recipient disconnected from message bus without replying
May 20 09:18:09 Tyrion NetworkManager[910]: <warn> [1495264689.6263] error requesting auth for org.freedesktop.NetworkManager.wifi.share.open: Authorization check failed: Message recipient disconnected from message bus without replying
May 20 09:18:09 Tyrion NetworkManager[910]: <warn> [1495264689.6263] error requesting auth for org.freedesktop.NetworkManager.wifi.share.protected: Authorization check failed: Message recipient disconnected from message bus without replying
May 20 09:18:09 Tyrion NetworkManager[910]: <warn> [1495264689.6263] error requesting auth for org.freedesktop.NetworkManager.network-control: Authorization check failed: Message recipient disconnected from message bus without replying
May 20 09:18:09 Tyrion NetworkManager[910]: <warn> [1495264689.6263] error requesting auth for org.freedesktop.NetworkManager.enable-disable-wimax: Authorization check failed: Message recipient disconnected from message bus without replying
May 20 09:18:09 Tyrion NetworkManager[910]: <warn> [1495264689.6263] error requesting auth for org.freedesktop.NetworkManager.enable-disable-wwan: Authorization check failed: Message recipient disconnected from message bus without replying
May 20 09:18:09 Tyrion NetworkManager[910]: <warn> [1495264689.6263] error requesting auth for org.freedesktop.NetworkManager.enable-disable-wifi: Authorization check failed: Message recipient disconnected from message bus without replying
May 20 09:18:09 Tyrion NetworkManager[910]: <warn> [1495264689.6264] error requesting auth for org.freedesktop.NetworkManager.sleep-wake: Authorization check failed: Message recipient disconnected from message bus without replying
May 20 09:18:09 Tyrion NetworkManager[910]: <warn> [1495264689.6264] error requesting auth for org.freedesktop.NetworkManager.enable-disable-network: Authorization check failed: Message recipient disconnected from message bus without replying
May 20 09:18:54 Tyrion systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
May 20 09:18:54 Tyrion systemd[1]: Started File System Check Daemon to report status.
May 20 09:18:54 Tyrion ntfs-3g[701]: Cmdline options: rw,umask=007,gid=46
May 20 09:18:54 Tyrion ntfs-3g[701]: Warning : using problematic uid==0 and gid!=0
May 20 09:18:54 Tyrion kernel: [ 0.000000] efi: EFI v2.60 by American Megatrends
May 20 09:18:54 Tyrion kernel: [ 0.000000] efi: ACPI 2.0=0xdd01d000 ACPI=0xdd01d000 SMBIOS=0xde259000 ESRT=0xd942ec18 MEMATTR=0xd9412018
May 20 09:18:54 Tyrion kernel: [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160422/tbfadt-658)
May 20 09:18:54 Tyrion kernel: [ 0.000000] ACPI: UEFI 0x00000000DD02F2F0 000042 (v01 00000000 00000000)
May 20 09:18:54 Tyrion kernel: [ 0.000000] tsc: Fast TSC calibration failed
May 20 09:18:54 Tyrion kernel: [ 0.018530] efi_bgrt: Ignoring BGRT: Incorrect BMP magic number 0x0 (expected 0x4d42)
May 20 09:18:54 Tyrion kernel: [ 0.421884] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
May 20 09:18:54 Tyrion kernel: [ 0.427641] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
May 20 09:18:54 Tyrion kernel: [ 0.433085] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
May 20 09:18:54 Tyrion kernel: [ 0.471019] SCSI subsystem initialized
May 20 09:18:54 Tyrion kernel: [ 0.508818] pci 0000:04:06.0: BAR 14: failed to assign [mem size 0x00200000]
May 20 09:18:54 Tyrion kernel: [ 0.508821] pci 0000:04:06.0: BAR 13: failed to assign [io size 0x1000]
May 20 09:18:54 Tyrion kernel: [ 0.508823] pci 0000:04:06.0: BAR 14: failed to assign [mem size 0x00200000]
May 20 09:18:54 Tyrion kernel: [ 0.508825] pci 0000:04:06.0: BAR 13: failed to assign [io size 0x1000]
May 20 09:18:54 Tyrion kernel: [ 1.013865] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
May 20 09:18:54 Tyrion kernel: [ 2.027791] pciehp 0000:04:06.0:pcie204: Timeout on hotplug command 0x13f1 (issued 1016 msec ago)
May 20 09:18:54 Tyrion kernel: [ 3.051825] pciehp 0000:04:06.0:pcie204: Timeout on hotplug command 0x17f1 (issued 1024 msec ago)
May 20 09:18:54 Tyrion kernel: [ 3.051900] efifb: probing for efifb
May 20 09:18:54 Tyrion kernel: [ 3.051918] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
May 20 09:18:54 Tyrion kernel: [ 3.051918] efifb: mode is 1024x768x32, linelength=4096, pages=1
May 20 09:18:54 Tyrion kernel: [ 3.051919] efifb: scrolling: redraw
May 20 09:18:54 Tyrion kernel: [ 3.051920] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
May 20 09:18:54 Tyrion kernel: [ 3.052077] fb0: EFI VGA frame buffer device
May 20 09:18:54 Tyrion kernel: [ 3.135920] EFI Variables Facility v0.08 2004-May-17
May 20 09:18:54 Tyrion kernel: [ 3.156886] WARNING: CPU: 6 PID: 1 at /build/linux-hwe-X3pKE5/linux-hwe-4.8.0/lib/kobject.c:210 kobject_add_internal+0x26c/0x330
May 20 09:18:54 Tyrion kernel: [ 3.156928] kobject_create_and_add: kobject_add error: -22
May 20 09:18:54 Tyrion kernel: [ 3.233345] scsi host0: ahci
May 20 09:18:54 Tyrion kernel: [ 3.233625] scsi host1: ahci
May 20 09:18:54 Tyrion kernel: [ 3.234853] scsi host2: ahci
May 20 09:18:54 Tyrion kernel: [ 3.234926] scsi host3: ahci
May 20 09:18:54 Tyrion kernel: [ 3.234981] scsi host4: ahci
May 20 09:18:54 Tyrion kernel: [ 3.235033] scsi host5: ahci
May 20 09:18:54 Tyrion kernel: [ 3.235086] scsi host6: ahci
May 20 09:18:54 Tyrion kernel: [ 3.235137] scsi host7: ahci
May 20 09:18:54 Tyrion kernel: [ 3.235834] scsi host8: ahci
May 20 09:18:54 Tyrion kernel: [ 3.247214] nvidia: module verification failed: signature and/or required key missing - tainting kernel
May 20 09:18:54 Tyrion kernel: [ 3.547560] ata9: SATA link down (SStatus 0 SControl 300)
May 20 09:18:54 Tyrion kernel: [ 3.707881] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 20 09:18:54 Tyrion kernel: [ 3.709230] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2KW18 036C PQ: 0 ANSI: 5
May 20 09:18:54 Tyrion kernel: [ 3.739768] sd 0:0:0:0: Attached scsi generic sg0 type 0
May 20 09:18:54 Tyrion kernel: [ 3.739787] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB)
May 20 09:18:54 Tyrion kernel: [ 3.741146] sd 0:0:0:0: [sda] Attached SCSI disk
May 20 09:18:54 Tyrion kernel: [ 4.211919] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 20 09:18:54 Tyrion kernel: [ 4.213382] scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
May 20 09:18:54 Tyrion kernel: [ 4.248105] sd 1:0:0:0: Attached scsi generic sg1 type 0
May 20 09:18:54 Tyrion kernel: [ 4.248197] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
May 20 09:18:54 Tyrion kernel: [ 4.312898] sd 1:0:0:0: [sdb] Attached SCSI disk
May 20 09:18:54 Tyrion kernel: [ 4.723950] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 20 09:18:54 Tyrion kernel: [ 4.729137] scsi 4:0:0:0: CD-ROM ASUS DRW-24D5MT 1.00 PQ: 0 ANSI: 5
May 20 09:18:54 Tyrion kernel: [ 4.759251] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
May 20 09:18:54 Tyrion kernel: [ 4.759389] sr 4:0:0:0: Attached scsi CD-ROM sr0
May 20 09:18:54 Tyrion kernel: [ 4.759453] sr 4:0:0:0: Attached scsi generic sg2 type 5
May 20 09:18:54 Tyrion kernel: [ 4.913594] scsi host9: usb-storage 1-6.2:1.2
May 20 09:18:54 Tyrion kernel: [ 5.076419] ata6: SATA link down (SStatus 0 SControl 300)
May 20 09:18:54 Tyrion kernel: [ 5.727604] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
May 20 09:18:54 Tyrion kernel: [ 5.937522] scsi 9:0:0:0: Direct-Access HP Photosmart 8100 1.00 PQ: 0 ANSI: 2
May 20 09:18:54 Tyrion kernel: [ 5.937764] sd 9:0:0:0: Attached scsi generic sg3 type 0
May 20 09:18:54 Tyrion kernel: [ 5.939199] sd 9:0:0:0: [sdc] Attached SCSI removable disk
May 20 09:18:54 Tyrion kernel: [ 7.203235] audit: type=1400 audit(1495264734.527:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=846 comm="apparmor_parser"
May 20 09:18:54 Tyrion kernel: [ 7.203242] audit: type=1400 audit(1495264734.527:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=846 comm="apparmor_parser"
May 20 09:18:54 Tyrion kernel: [ 7.203966] audit: type=1400 audit(1495264734.531:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=842 comm="apparmor_parser"
May 20 09:18:54 Tyrion kernel: [ 7.203971] audit: type=1400 audit(1495264734.531:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=842 comm="apparmor_parser"
May 20 09:18:54 Tyrion kernel: [ 7.203975] audit: type=1400 audit(1495264734.531:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=842 comm="apparmor_parser"
May 20 09:18:54 Tyrion kernel: [ 7.203979] audit: type=1400 audit(1495264734.531:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=842 comm="apparmor_parser"
May 20 09:18:54 Tyrion kernel: [ 7.204517] audit: type=1400 audit(1495264734.531:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=841 comm="apparmor_parser"
May 20 09:18:54 Tyrion kernel: [ 7.204522] audit: type=1400 audit(1495264734.531:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=841 comm="apparmor_parser"
May 20 09:18:54 Tyrion kernel: [ 7.205233] audit: type=1400 audit(1495264734.531:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=847 comm="apparmor_parser"
May 20 09:18:54 Tyrion kernel: [ 7.205258] audit: type=1400 audit(1495264734.531:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=849 comm="apparmor_parser"
May 20 09:18:54 Tyrion thermald[881]: THD engine start failed
May 20 09:18:54 Tyrion NetworkManager[940]: <info> [1495264734.6502] manager[0x1b6e200]: monitoring kernel firmware directory '/lib/firmware'.
May 20 09:18:54 Tyrion NetworkManager[940]: <info> [1495264734.6761] settings: loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-settings-plugin-ifupdown.so)
May 20 09:18:54 Tyrion NetworkManager[940]: <info> [1495264734.6761] settings: loaded plugin keyfile: (c) 2007 - 2015 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
May 20 09:18:54 Tyrion NetworkManager[940]: <info> [1495264734.6764] settings: loaded plugin ofono: (C) 2013-2016 Canonical Ltd. To report bugs please use the NetworkManager mailing list. (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-settings-plugin-ofono.so)
May 20 09:18:54 Tyrion /usr/lib/snapd/snapd[947]: stateengine.go:98: state ensure error: Post https://search.apps.ubuntu.com/api/v1/snaps/metadata: dial tcp: lookup search.apps.ubuntu.com on [::1]:53: read udp [::1]:56037->[::1]:53: read: connection refused
May 20 09:18:54 Tyrion snapd[947]: 2017/05/20 09:18:54.698090 stateengine.go:98: state ensure error: Post https://search.apps.ubuntu.com/api/v1/snaps/metadata: dial tcp: lookup search.apps.ubuntu.com on [::1]:53: read udp [::1]:56037->[::1]:53: read: connection refused
May 20 09:18:54 Tyrion colord[1032]: (colord:1032): Cd-WARNING **: failed to get session [pid 888]: Aucun périphérique ou adresse
May 20 09:18:54 Tyrion NetworkManager[940]: nm_device_get_device_type: assertion 'NM_IS_DEVICE (self)' failed
May 20 09:18:54 Tyrion whoopsie[946]: [09:18:54] GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: La propriété « state » n'existe pas
May 20 09:18:54 Tyrion NetworkManager[940]: <warn> [1495264734.7468] failed to enumerate oFono devices: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
May 20 09:18:56 Tyrion org.a11y.Bus[1218]: ** (process:1335): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
May 20 09:18:56 Tyrion NetworkManager[940]: <info> [1495264736.3839] dhcp4 (enp30s0): activation: beginning transaction (timeout in 45 seconds)
May 20 09:18:57 Tyrion org.gnome.ScreenSaver[1218]: ** (gnome-screensaver:1615): WARNING **: Couldn't get presence status: The name org.gnome.SessionManager was not provided by any .service files
May 20 09:18:59 Tyrion /hpfax: [1801]: error: Failed to create /var/spool/cups/tmp/.hplip
May 20 09:19:00 Tyrion gnome-session[1533]: (process:1851): indicator-application-service-WARNING **: Name Lost
May 20 09:19:00 Tyrion gnome-session[1533]: (nautilus:1859): GLib-GIO-CRITICAL **: g_dbus_interface_skeleton_unexport: assertion 'interface_->priv->connections != NULL' failed
May 20 09:19:00 Tyrion gnome-session[1533]: (nautilus:1859): GLib-GIO-CRITICAL **: g_dbus_interface_skeleton_unexport: assertion 'interface_->priv->connections != NULL' failed
May 20 09:19:00 Tyrion gnome-session[1533]: (nautilus:1859): Gtk-CRITICAL **: gtk_icon_theme_get_for_screen: assertion 'GDK_IS_SCREEN (screen)' failed
May 20 09:19:00 Tyrion gnome-session[1533]: (nautilus:1859): GLib-GObject-WARNING **: invalid (NULL) pointer instance
May 20 09:19:00 Tyrion gnome-session[1533]: (nautilus:1859): GLib-GObject-CRITICAL **: g_signal_connect_object: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed
May 20 09:19:00 Tyrion gnome-session[1533]: (gnome-software:1845): Gs-WARNING **: Failed to create permission org.freedesktop.packagekit.trigger-offline-update: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Action org.freedesktop.packagekit.trigger-offline-update is not registered
May 20 09:19:00 Tyrion gnome-session[1533]: (gnome-software:1845): Gs-WARNING **: Failed to create permission org.freedesktop.packagekit.trigger-offline-update: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Action org.freedesktop.packagekit.trigger-offline-update is not registered
May 20 09:19:21 Tyrion org.gnome.zeitgeist.Engine[1218]: ** (zeitgeist-datahub:1937): WARNING **: zeitgeist-datahub.vala:229: Unable to get name "org.gnome.zeitgeist.datahub" on the bus!
May 20 09:19:21 Tyrion gnome-session[1533]: ** (zeitgeist-datahub:1915): WARNING **: kde-recent-document-provider.vala:174: Couldn't find actor for 'LibreOffice'.
May 20 09:19:22 Tyrion gnome-session[1533]: message repeated 9 times: [ ** (zeitgeist-datahub:1915): WARNING **: kde-recent-document-provider.vala:174: Couldn't find actor for 'LibreOffice'.]
May 20 09:19:22 Tyrion pulseaudio[1662]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out
May 20 09:24:07 Tyrion whoopsie[946]: [09:24:07] Sent; server replied with: No error
May 20 09:24:07 Tyrion com.canonical.Unity.Scope.Applications[1218]: Error loading package indexes: Couldn't stat '/var/cache/software-center/xapian'
May 20 09:24:07 Tyrion com.canonical.Unity.Scope.Applications[1218]: (unity-scope-loader:2373): unity-applications-daemon-CRITICAL **: daemon.vala:144: Failed to load Software Center index. 'Apps Available for Download' will not be listed
May 20 09:24:14 Tyrion whoopsie[946]: [09:24:14] Sent; server replied with: No error
May 20 09:26:36 Tyrion gnome-session[1533]: gnome-session-binary[1533]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:26:36 Tyrion gnome-session-binary[1533]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:26:36 Tyrion gnome-session[1533]: gnome-session-binary[1533]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:26:36 Tyrion gnome-session[1533]: message repeated 2 times: [ gnome-session-binary[1533]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed]
May 20 09:26:36 Tyrion gnome-session-binary[1533]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:26:36 Tyrion gnome-session-binary[1533]: message repeated 2 times: [ GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed]
May 20 09:26:36 Tyrion gnome-session[1533]: gnome-session-binary[1533]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:26:36 Tyrion gnome-session-binary[1533]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:26:36 Tyrion gnome-session[1533]: gnome-session-binary[1533]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:26:36 Tyrion gnome-session-binary[1533]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:26:36 Tyrion gnome-session[1533]: gnome-session-binary[1533]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:26:36 Tyrion gnome-session[1533]: gnome-session-binary[1533]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:26:36 Tyrion gnome-session-binary[1533]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 09:26:36 Tyrion gnome-session-binary[1533]: GLib-GObject-CRITICAL: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
May 20 15:09:39 Tyrion kernel: [ 0.000000] efi: EFI v2.60 by American Megatrends
May 20 15:09:39 Tyrion kernel: [ 0.000000] efi: ACPI 2.0=0xdd01d000 ACPI=0xdd01d000 SMBIOS=0xde259000 ESRT=0xd942ec18 MEMATTR=0xd9412018
May 20 15:09:39 Tyrion kernel: [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160422/tbfadt-658)
May 20 15:09:39 Tyrion kernel: [ 0.000000] ACPI: UEFI 0x00000000DD02F2F0 000042 (v01 00000000 00000000)
May 20 15:09:39 Tyrion kernel: [ 0.000000] tsc: Fast TSC calibration failed
May 20 15:09:39 Tyrion kernel: [ 0.018656] efi_bgrt: Ignoring BGRT: Incorrect BMP magic number 0x0 (expected 0x4d42)
May 20 15:09:39 Tyrion kernel: [ 0.420569] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
May 20 15:09:39 Tyrion kernel: [ 0.426326] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
May 20 15:09:39 Tyrion kernel: [ 0.431760] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
May 20 15:09:39 Tyrion kernel: [ 0.469746] SCSI subsystem initialized
May 20 15:09:39 Tyrion kernel: [ 0.507920] pci 0000:04:06.0: BAR 14: failed to assign [mem size 0x00200000]
May 20 15:09:39 Tyrion kernel: [ 0.507924] pci 0000:04:06.0: BAR 13: failed to assign [io size 0x1000]
May 20 15:09:39 Tyrion kernel: [ 0.507925] pci 0000:04:06.0: BAR 14: failed to assign [mem size 0x00200000]
May 20 15:09:39 Tyrion kernel: [ 0.507927] pci 0000:04:06.0: BAR 13: failed to assign [io size 0x1000]
May 20 15:09:39 Tyrion kernel: [ 1.012902] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
May 20 15:09:39 Tyrion kernel: [ 2.026683] pciehp 0000:04:06.0:pcie204: Timeout on hotplug command 0x13f1 (issued 1012 msec ago)
May 20 15:09:39 Tyrion kernel: [ 3.050712] pciehp 0000:04:06.0:pcie204: Timeout on hotplug command 0x17f1 (issued 1024 msec ago)
May 20 15:09:39 Tyrion kernel: [ 3.134729] EFI Variables Facility v0.08 2004-May-17
May 20 15:09:39 Tyrion kernel: [ 3.155743] WARNING: CPU: 6 PID: 1 at /build/linux-hwe-X3pKE5/linux-hwe-4.8.0/lib/kobject.c:210 kobject_add_internal+0x26c/0x330
May 20 15:09:39 Tyrion kernel: [ 3.155784] kobject_create_and_add: kobject_add error: -22
May 20 15:09:39 Tyrion kernel: [ 3.223341] scsi host0: ahci
May 20 15:09:39 Tyrion kernel: [ 3.223434] scsi host1: ahci
May 20 15:09:39 Tyrion kernel: [ 3.223499] scsi host2: ahci
May 20 15:09:39 Tyrion kernel: [ 3.223560] scsi host3: ahci
May 20 15:09:39 Tyrion kernel: [ 3.223621] scsi host4: ahci
May 20 15:09:39 Tyrion kernel: [ 3.223679] scsi host5: ahci
May 20 15:09:39 Tyrion kernel: [ 3.223757] scsi host6: ahci
May 20 15:09:39 Tyrion kernel: [ 3.223841] scsi host7: ahci
May 20 15:09:39 Tyrion kernel: [ 3.224234] scsi host8: ahci
May 20 15:09:39 Tyrion kernel: [ 3.245186] nvidia: module verification failed: signature and/or required key missing - tainting kernel
May 20 15:09:39 Tyrion kernel: [ 3.534999] ata9: SATA link down (SStatus 0 SControl 300)
May 20 15:09:39 Tyrion kernel: [ 3.694772] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 20 15:09:39 Tyrion kernel: [ 3.696039] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2KW18 036C PQ: 0 ANSI: 5
May 20 15:09:39 Tyrion kernel: [ 3.726579] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB)
May 20 15:09:39 Tyrion kernel: [ 3.726716] sd 0:0:0:0: Attached scsi generic sg0 type 0
May 20 15:09:39 Tyrion kernel: [ 3.728054] sd 0:0:0:0: [sda] Attached SCSI disk
May 20 15:09:39 Tyrion kernel: [ 4.202819] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 20 15:09:39 Tyrion kernel: [ 4.204324] scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
May 20 15:09:39 Tyrion kernel: [ 4.242968] sd 1:0:0:0: Attached scsi generic sg1 type 0
May 20 15:09:39 Tyrion kernel: [ 4.243160] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
May 20 15:09:39 Tyrion kernel: [ 4.306538] sd 1:0:0:0: [sdb] Attached SCSI disk
May 20 15:09:39 Tyrion kernel: [ 4.718836] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 20 15:09:39 Tyrion kernel: [ 4.724037] scsi 4:0:0:0: CD-ROM ASUS DRW-24D5MT 1.00 PQ: 0 ANSI: 5
May 20 15:09:39 Tyrion kernel: [ 4.754129] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
May 20 15:09:39 Tyrion kernel: [ 4.754579] sr 4:0:0:0: Attached scsi CD-ROM sr0
May 20 15:09:39 Tyrion kernel: [ 4.754646] sr 4:0:0:0: Attached scsi generic sg2 type 5
May 20 15:09:39 Tyrion kernel: [ 4.888421] scsi host9: usb-storage 1-6.2:1.2
May 20 15:09:39 Tyrion kernel: [ 5.070680] ata6: SATA link down (SStatus 0 SControl 300)
May 20 15:09:39 Tyrion kernel: [ 5.643017] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
May 20 15:09:39 Tyrion kernel: [ 5.816256] audit: type=1400 audit(1495285779.140:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=511 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 5.816260] audit: type=1400 audit(1495285779.140:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=511 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 5.816264] audit: type=1400 audit(1495285779.140:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=511 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 5.888563] audit: type=1400 audit(1495285779.212:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=549 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 5.888569] audit: type=1400 audit(1495285779.212:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=549 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 5.888572] audit: type=1400 audit(1495285779.212:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=549 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 5.888575] audit: type=1400 audit(1495285779.212:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=549 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 5.908217] scsi 9:0:0:0: Direct-Access HP Photosmart 8100 1.00 PQ: 0 ANSI: 2
May 20 15:09:39 Tyrion kernel: [ 5.910747] sd 9:0:0:0: Attached scsi generic sg3 type 0
May 20 15:09:39 Tyrion kernel: [ 5.912803] sd 9:0:0:0: [sdc] Attached SCSI removable disk
May 20 15:09:39 Tyrion kernel: [ 6.048813] audit: type=1400 audit(1495285779.372:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=814 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 6.048821] audit: type=1400 audit(1495285779.372:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=814 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 6.048824] audit: type=1400 audit(1495285779.372:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=814 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 6.048827] audit: type=1400 audit(1495285779.372:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=814 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 6.049012] audit: type=1400 audit(1495285779.372:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=813 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 6.049017] audit: type=1400 audit(1495285779.372:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=813 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 6.049628] audit: type=1400 audit(1495285779.372:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=821 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 6.050823] audit: type=1400 audit(1495285779.376:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=823 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 6.052533] audit: type=1400 audit(1495285779.376:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=819 comm="apparmor_parser"
May 20 15:09:39 Tyrion kernel: [ 6.054590] audit: type=1400 audit(1495285779.380:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=820 comm="apparmor_parser"
May 20 15:10:09 Tyrion kernel: [ 35.901232] audit: type=1400 audit(1495285809.224:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1595 comm="apparmor_parser"
May 20 15:10:09 Tyrion kernel: [ 35.901236] audit: type=1400 audit(1495285809.224:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1595 comm="apparmor_parser"
May 20 15:10:09 Tyrion kernel: [ 35.920967] audit: type=1400 audit(1495285809.248:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=1595 comm="apparmor_parser"
May 20 15:11:33 Tyrion dbus[464]: [system] Activated service 'org.freedesktop.systemd1' failed: Launch helper exited with unknown return code 1
May 20 15:11:33 Tyrion dbus[464]: [system] Activated service 'org.freedesktop.login1' failed: Launch helper exited with unknown return code 1
May 20 15:11:36 Tyrion dbus[464]: [system] Activated service 'org.freedesktop.systemd1' failed: Launch helper exited with unknown return code 1
May 20 15:11:36 Tyrion dbus[464]: [system] Activated service 'org.freedesktop.login1' failed: Launch helper exited with unknown return code 1
May 20 15:11:36 Tyrion dbus[464]: [system] Activated service 'org.freedesktop.systemd1' failed: Launch helper exited with unknown return code 1
May 20 15:11:36 Tyrion dbus[464]: [system] Activated service 'org.freedesktop.login1' failed: Launch helper exited with unknown return code 1
May 20 15:11:36 Tyrion dbus[464]: [system] Activated service 'org.freedesktop.systemd1' failed: Launch helper exited with unknown return code 1
May 20 15:11:36 Tyrion dbus[464]: [system] Activated service 'org.freedesktop.login1' failed: Launch helper exited with unknown return code 1
May 20 15:11:36 Tyrion dbus[464]: [system] Activated service 'org.freedesktop.systemd1' failed: Launch helper exited with unknown return code 1
May 20 15:11:45 Tyrion dbus[464]: [system] Activated service 'org.freedesktop.systemd1' failed: Launch helper exited with unknown return code 1
_____________________________________ Xorg ____________________________________
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.114] (==) No Layout section. Using the first Screen section.
[ 7.114] (==) No screen section available. Using defaults.
[ 7.114] (**) |-->Screen "Default Screen Section" (0)
[ 7.114] (**) | |-->Monitor "<default monitor>"
[ 7.115] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.117] (--) PCI:*(0:34:0:0) 10de:1c02:1462:8c95 rev 161, Mem @ 0xfc000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 7.117] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 7.117] (II) LoadModule: "glx"
[ 7.117] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 7.170] (II) LoadModule: "nvidia"
[ 7.170] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 7.175] (II) LoadModule: "nouveau"
[ 7.175] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 7.176] (II) LoadModule: "modesetting"
[ 7.176] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 7.176] (II) LoadModule: "fbdev"
[ 7.176] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 7.176] (II) LoadModule: "vesa"
[ 7.177] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7.179] (II) Loading sub module "fb"
[ 7.179] (II) LoadModule: "fb"
[ 7.179] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.179] (II) Loading sub module "wfb"
[ 7.179] (II) LoadModule: "wfb"
[ 7.179] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 7.180] (II) Loading sub module "ramdac"
[ 7.180] (II) LoadModule: "ramdac"
[ 7.182] (WW) Falling back to old probe method for modesetting
[ 7.182] (WW) Falling back to old probe method for fbdev
[ 7.182] (II) Loading sub module "fbdevhw"
[ 7.182] (II) LoadModule: "fbdevhw"
[ 7.182] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 7.182] (WW) Falling back to old probe method for vesa
[ 7.182] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.951] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 7.958] (II) UnloadModule: "nouveau"
[ 7.958] (II) UnloadModule: "modesetting"
[ 7.958] (II) UnloadModule: "fbdev"
[ 7.958] (II) UnloadModule: "vesa"
[ 8.059] (II) Loading sub module "dri2"
[ 8.059] (II) LoadModule: "dri2"
[ 8.101] (II) LoadModule: "evdev"
[ 8.101] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 469.610] (II) UnloadModule: "evdev"
[ 469.610] (II) UnloadModule: "evdev"
[ 469.610] (II) UnloadModule: "evdev"
[ 469.610] (II) UnloadModule: "evdev"
[ 469.610] (II) UnloadModule: "evdev"
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-52-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-52-generic/updates/dkms
Found nvidia module: nvidia_375_uvm.ko
Is nvidia loaded? yes
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? no
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? yes
Is fglrx kernel module available? no
Is nvidia kernel module available? yes
Vendor/Device Id: 10de:1c02
BusID "PCI:34@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Does it require offloading? no
last cards number = 1
Has amd? no
Has intel? no
Has nvidia? yes
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/nvidia-375/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/nvidia-375/ld.so.conf
Is nvidia enabled? yes
Is nvidia egl enabled? yes
Is fglrx enabled? no
Is mesa enabled? no
Is mesa egl enabled? no
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? yes
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? yes
Is prime egl available? no
Single card detected
Driver is already loaded and enabled
Nothing to do
No change - nothing to do
Nvidia packages and kernel files:
nvidia-375 375.39-0ubuntu0.16.04.1
nvidia-opencl-icd-375 375.39-0ubuntu0.16.04.1
nvidia-prime 0.8.2
nvidia-settings 361.42-0ubuntu1
bbswitch-dkms 0.8-3ubuntu1
Apr 26 20:13 /lib/modules/4.8.0-51-generic/kernel/drivers/video/fbdev/nvidia/nvidiafb.ko
May 14 18:49 /lib/modules/4.8.0-51-generic/updates/dkms/nvidia_375.ko
May 14 18:49 /lib/modules/4.8.0-51-generic/updates/dkms/nvidia_375_drm.ko
May 14 18:49 /lib/modules/4.8.0-51-generic/updates/dkms/nvidia_375_modeset.ko
May 14 18:49 /lib/modules/4.8.0-51-generic/updates/dkms/nvidia_375_uvm.ko
Apr 28 20:43 /lib/modules/4.8.0-52-generic/kernel/drivers/video/fbdev/nvidia/nvidiafb.ko
May 18 23:02 /lib/modules/4.8.0-52-generic/updates/dkms/nvidia_375.ko
May 18 23:02 /lib/modules/4.8.0-52-generic/updates/dkms/nvidia_375_drm.ko
May 18 23:02 /lib/modules/4.8.0-52-generic/updates/dkms/nvidia_375_modeset.ko
May 18 23:02 /lib/modules/4.8.0-52-generic/updates/dkms/nvidia_375_uvm.ko
May 14 18:48 /lib/nvidia-375
============================ Disks SMART Attributes ===========================
### ATA disks: sda sdb
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: INTEL SSDSC2KW180H6
LU WWN Device Id: 5 5cd2e4 14d0b354f
Firmware Version: LSF036C
User Capacity: 180,045,766,656 bytes [180 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat May 20 16:21:43 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 4
12 Power_Cycle_Count -O--CK 100 100 000 - 65
170 Unknown_Attribute PO--CK 100 100 010 - 0
171 Unknown_Attribute -O--CK 100 100 010 - 0
172 Unknown_Attribute -O--CK 100 100 010 - 0
174 Unknown_Attribute -O--CK 100 100 000 - 6
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 090 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 020 029 000 - 20 (Min/Max 13/29)
192 Power-Off_Retract_Count -O--CK 100 100 000 - 6
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
225 Unknown_SSD_Attribute -O--CK 100 100 000 - 5371
226 Unknown_SSD_Attribute -O--CK 100 100 000 - 0
227 Unknown_SSD_Attribute -O--CK 100 100 000 - 0
228 Power-off_Retract_Count -O--CK 100 100 000 - 0
232 Available_Reservd_Space PO--CK 100 100 010 - 0
233 Media_Wearout_Indicator -O--CK 100 100 000 - 0
241 Total_LBAs_Written -O--CK 100 100 000 - 5371
242 Total_LBAs_Read -O--CK 100 100 000 - 8310
249 Unknown_Attribute -O--CK 100 100 000 - 124
252 Unknown_Attribute -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD10EZEX-08WN4A0
LU WWN Device Id: 5 0014ee 2b9047064
Firmware Version: 01.01A01
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat May 20 16:21:43 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 174 172 021 - 2300
4 Start_Stop_Count -O--CK 100 100 000 - 79
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 134
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 64
192 Power-Off_Retract_Count -O--CK 200 200 000 - 5
193 Load_Cycle_Count -O--CK 200 200 000 - 184
194 Temperature_Celsius -O---K 117 112 000 - 26
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
### USB disks: sdc
# Drive sdc:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
=============================== StdErr Messages ===============================
xrandr: Failed to get size of gamma for output defaultSur cette page qui concerne ton processeur AMD Ryzen 5 1400, on peut lire : "We recommend using Ryzen only with Linux kernels 4.10 and later.". La version 16.04.2 que tu utilises est actuellement avec le noyau 4.8 ce qui ne semble pas convenir : tu devrais la remplacer par la version 17.04
Dernière modification par malbo (Le 21/05/2017, à 06:41)
Hors ligne
#15 Le 22/05/2017, à 09:40
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Merci beaucoup Malbo d'avoir déniché cette information. Je vais mettre en place la 17.04, en espérant que ça aide.
Hors ligne
#16 Le 22/05/2017, à 11:16
- malbo
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Donne des nouvelles (en espérant qu'elles soient bonnes).
Hors ligne
#17 Le 24/05/2017, à 21:25
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Bon, je n'ai pas pris le temps de faire cette mise à jour suffisamment rapidement (eh oui, la vie est remplie d'autres impératifs...) et me voilà replanté. J'ai des mises à jour à faire, mais ça ne semble pas la cause, puisqu'il ne fait rien tout seul.
Apparemment, mon réseau ne marche pas. Pourtant l'ethernet semble actif d'après ifconfig... Le apt-upgrade hurle à chque paquet qu'il n'arrive pas à le récupérer... Bon... Est-ce un indice ? Je ne sais pas...
Cette instabilité (il n'y a pas d'autre mot quand un système qui ne change pas se comporte tout d'un coup de façon hystérique et refuse de booter comme il l'a fait plein de fois avant) vient peut-être de cette incompatibilité de kernel ? Je vais réinstaller en 17.04, mais ce sera mon dernier essai. Si ça plante encore après, adieu ubuntu...
Hors ligne
#18 Le 24/05/2017, à 21:30
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Je trouve quand même ahurissant de me retrouver bloqué ainsi. J'ai vraiment du mal à concevoir que quelque chose puisse tout d'un coup basculer dans un état modifié où une erreur qui n'existait pas avant apparait et arrête le processus de boot, sans aucun retour en arrière possible... Mais je ne dois pas m'y connaitre assez en hardware pour concevoir ça...
Hors ligne
#19 Le 24/05/2017, à 21:35
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Autre chose:
avant la bifurcation, le grub me donnait 10s avant de booter.
Maintenant, il me donne 30s...
J'avais déjà remarqué ça sur le plantages précédent. Un autre indice ? Je ne suis pas capable d'interpréter, mais il me semble que c'est le signe que quelque chose a changé dans le grub... Ce qui n'est pas normal, puisque je lui ai demandé de ne rien changer dans le système... Ah, ces trucs automatisés...
Hors ligne
#20 Le 25/05/2017, à 00:39
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
J'ai réinstallé ubuntu 17.04.
A suivre...
Hors ligne
#21 Le 25/05/2017, à 05:56
- malbo
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Bonjour,
Tu mentionnais 30s avant de booter dans le post #19. Qu'en est-il après cette dernière réinstallation ?
Tant que la situation est stable, je te prie de faire un rapport Bisnext depuis une session de ton Kubuntu (ou Ubuntu ?) réinstallé.
Dernière modification par malbo (Le 25/05/2017, à 06:26)
Hors ligne
#22 Le 25/05/2017, à 14:50
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Pour les 30s, il semble (d'après ce que j'ai lu par-ci par-là) que ce soit une valeur par défaut qui se met en place quand un démarrage n'a pas réussi. Ce qui est cohérent avec mon expérience. Après la nouvelle installation (Ubuntu, pas kubuntu, je passe le détail sur les négociations familiales...), le décompte est revenu à 10s.
Pour bisnext, je le fais dès que j'ai un moment.
Hors ligne
#23 Le 28/05/2017, à 10:46
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Voici le rapport bisnext, pour cette nouvelle installation Ubuntu 17.04
https://paste.debian.net/940616/
Je tiendrai au courant de la stabilité.
Hors ligne
#24 Le 01/06/2017, à 14:06
- malbo
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Excuse-moi, j'avais zappé ton post 23. Je colle le rapport Bisnext (https://paste.debian.net/940616/) ci-dessous :
Posting 940616 from bn-dcb20 posted at 2017-05-25 14:12:09 expires: 2017-06-24 14:12:09
May 25, 2017, bisnext report id dcb20
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.10.0-21-generic x86_64 (64 bit gcc: 6.3.0)
Desktop: N/A dm: lightdm Distro: Ubuntu 17.04
Machine: Device: desktop Mobo: MSI model: B350M GAMING PRO (MS-7A39) v: 1.0
UEFI: American Megatrends v: 2.40 date: 04/10/2017
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Quad core AMD Ryzen 5 1400 (-HT-MCP-) cache: 2048 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 25599
clock speeds: min/max: 1550/3200 MHz 1: 1550 MHz 2: 1550 MHz
3: 1550 MHz 4: 1550 MHz 5: 1550 MHz 6: 1550 MHz 7: 1550 MHz
8: 2800 MHz
Memory: Array-1 capacity: 16 GB devices: 2 EC: None
Device-1: DIMM 0 size: 8 GB speed: 1067 MHz type: DDR4
manufacturer: N/A part: F4-2400C15-8GVR
Device-2: DIMM 0 size: 8 GB speed: 1067 MHz type: DDR4
manufacturer: N/A part: F4-2400C15-8GVR
Graphics: Card: NVIDIA GP106 [GeForce GTX 1060 3GB]
bus-ID: 22:00.0 chip-ID: 10de:1c02
Display Server: X.Org 1.19.3 drivers: nvidia (unloaded: modesetting,fbdev,vesa,nouveau)
tty size: 1920x1080@60.00hz
GLX Renderer: GeForce GTX 1060 3GB/PCIe/SSE2
GLX Version: 4.5.0 NVIDIA 375.39 Direct Rendering: Yes
Audio: Card-1 Advanced Micro Devices [AMD] Device 1457
driver: snd_hda_intel bus-ID: 24:00.3 chip-ID: 1022:1457
Card-2 NVIDIA GP106 High Definition Audio Controller
driver: snd_hda_intel bus-ID: 22:00.1 chip-ID: 10de:10f1
Sound: Advanced Linux Sound Architecture v: k4.10.0-21-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: f000
bus-ID: 1e:00.0 chip-ID: 10ec:8168
IF: enp30s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1180.3GB (7.4% used)
ID-1: /dev/sda model: INTEL_SSDSC2KW18 size: 180.0GB
ID-2: /dev/sdb model: WDC_WD10EZEX size: 1000.2GB
Optical: /dev/sr0 model: N/A
rev: N/A dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 12x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: N/A
Partition: ID-1: / size: 21G used: 5.4G (29%) fs: ext4 dev: /dev/sda5
label: N/A uuid: 2f076a6d-221d-40c7-b673-ee1500d38f36
ID-2: /boot/efi size: 495M used: 29M (6%) fs: vfat dev: /dev/sda1
label: BOOT uuid: 1E39-18FC
ID-3: /stockage size: 184G used: 63G (36%) fs: ext4 dev: /dev/sdb3
label: N/A uuid: a7d85848-9595-41fc-b6c4-055029b37ed1
ID-4: /home size: 77G used: 13G (18%) fs: ext4 dev: /dev/sdb2
label: N/A uuid: 20ae83b3-36f8-4216-b242-ee06dba38546
ID-5: swap-1 size: 2.00GB used: 0.00GB (0%) fs: swap dev: /dev/sda4
label: N/A uuid: c351b88e-721b-4aea-9cd9-964647a560c3
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sda2 size: 0.13G label: N/A uuid: N/A
ID-2: /dev/sda3 size: 155.27G
fs: NTFS label: SSD uuid: B2703C99703C65EF
ID-3: /dev/sdb1 size: 716.32G
fs: NTFS label: HDD uuid: 845828B35828A640
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://fr.archive.ubuntu.com/ubuntu/ zesty main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ zesty universe
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates universe
deb http://fr.archive.ubuntu.com/ubuntu/ zesty multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu zesty-security main restricted
deb http://security.ubuntu.com/ubuntu zesty-security universe
deb http://security.ubuntu.com/ubuntu zesty-security multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 20.6% command: firefox pid: 2377 mem: 413.61MB (2.5%)
2: cpu: 2.4% command: Xorg pid: 1210 mem: 59.31MB (0.3%)
3: cpu: 2.1% command: compiz pid: 1799 mem: 142.59MB (0.8%)
4: cpu: 0.9% daemon: ~irq/243-nvidia~ pid: 1216 mem: 0.00MB (0.0%)
5: cpu: 0.8% command: gnome-terminal-server pid: 2474 mem: 37.03MB (0.2%)
6: cpu: 0.5% command: bash pid: 4756 mem: 4.58MB (0.0%)
7: cpu: 0.3% command: init pid: 1 mem: 7.48MB (0.0%)
8: cpu: 0.2% command: gnome-software pid: 1962 mem: 79.69MB (0.4%)
9: cpu: 0.2% command: nautilus pid: 1890 mem: 45.92MB (0.2%)
10: cpu: 0.1% command: packagekitd pid: 4723 mem: 12.63MB (0.0%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 413.61MB (2.5%) command: firefox pid: 2377 cpu: 20.6%
2: mem: 142.59MB (0.8%) command: compiz pid: 1799 cpu: 2.1%
3: mem: 79.69MB (0.4%) command: gnome-software pid: 1962 cpu: 0.2%
4: mem: 59.31MB (0.3%) command: Xorg pid: 1210 cpu: 2.4%
5: mem: 51.68MB (0.3%) command: fwupd pid: 2012 cpu: 0.1%
6: mem: 45.92MB (0.2%) command: nautilus pid: 1890 cpu: 0.2%
7: mem: 39.89MB (0.2%) command: ibus-ui-gtk3 pid: 1405 cpu: 0.0%
8: mem: 37.03MB (0.2%) command: gnome-terminal-server pid: 2474 cpu: 0.8%
9: mem: 35.67MB (0.2%) command: unity-panel-service pid: 1811 cpu: 0.0%
10: mem: 34.73MB (0.2%) command: indicator-datetime-service pid: 1599 cpu: 0.0%
Info: Processes: 252 Uptime: 7 min Memory: 1042.9/16033.4MB
Init: systemd v: 232 runlevel: 5 default: 2 Gcc sys: 6.3.0
Client: Shell (bash 4.4.71 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0003
Timeout: 2 seconds
BootOrder: 0003,0000,0002,0005,0001
Boot0000* Windows Boot Manager HD(1,GPT,4155b90c-010e-4591-96ed-79613dd91be4,0x800,0xf9800)/File(\EFI\MICROSOFT\BOOT\BOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* Hard Drive BBS(HD,,0x0)/VenHw(5ce8128b-2cec-40f0-8372-80640e3dc858,0200)..GO..NO..........I.N.T.E.L. .S.S.D.S.C.2.K.W.1.8.0.H.6...................\.,.@.r.d.=.X..........A.................................>..Gd-.;.A..MQ..L.V.C.T.L.2.6.5.6.2.0.J.Q.8.1.B.0.N.G. . ........BO..NO..........W.D.C. .W.D.1.0.E.Z.E.X.-.0.8.W.N.4.A.0...................\.,.@.r.d.=.X..........A.................................>..Gd-.;.A..MQ..L. . . . .W. .-.D.C.W.6.C.5.Y.X.F.1.A.L.A........BO
Boot0002* CD/DVD Drive BBS(CDROM,,0x0)/VenHw(5ce8128b-2cec-40f0-8372-80640e3dc858,0300)..GO..NO..........D.R.W.-.2.4.D.5.M.T...................\.,.@.r.d.=.X..........A.................................>..Gd-.;.A..MQ..L.3.K.G.C.Q.6.2.9.5.0. .4. . . . . . . . ........BO
Boot0003* ubuntu HD(1,GPT,4155b90c-010e-4591-96ed-79613dd91be4,0x800,0xf9800)/File(\EFI\UBUNTU\SHIMX64.EFI)
Boot0005* UEFI: PXE IP4 Realtek PCIe GBE Family Controller PciRoot(0x0)/Pci(0x1,0x3)/Pci(0x0,0x2)/Pci(0x4,0x0)/Pci(0x0,0x0)/MAC(4ccc6afcd84b,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)..BO
vfat partition details:
/dev/sda1: LABEL="BOOT" UUID="1E39-18FC" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="4155b90c-010e-4591-96ed-79613dd91be4"
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
/dev/sda1@/EFI/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
_____________________________ md5sum of EFI files _____________________________
EFI files in /dev/sda1:
04461732d55beb15f0f29f59eca7f418 /EFI/ubuntu/grubx64.efi
0f08ecaaa01879b16987aeafd1fe20cc /EFI/ubuntu/fwupx64.efi
1650105fea8c992858d224d8f546b3d2 /EFI/Microsoft/Boot/memtest.efi
3aef9c72ad50faa8db576c01f85a0915 /EFI/ubuntu/shimx64.efi
61c7898dd613614b15cee0081226572c /EFI/ubuntu/fbx64.efi
7e5846c5c982a2037ae885d96f1163d3 /EFI/Boot/bootx64.efi
7e5846c5c982a2037ae885d96f1163d3 /EFI/Microsoft/Boot/bootmgfw.efi
bf39cf9416a9403d40a9b69541486e74 /EFI/ubuntu/mmx64.efi
e46ce79ec4662e061924f9a9e31ab4c3 /EFI/Microsoft/Boot/bootmgr.efi
========================= Boot Information Details ============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi /EFI/Boot/bootx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi /EFI/ubuntu/mmx64.efi
/EFI/ubuntu/fbx64.efi
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /Windows/System32/winload.exe
sda4: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 17.04
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disque /dev/sda : 167,7 GiB, 180045766656 octets, 351651888 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 351,651,887 351,651,887 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,023,999 1,021,952 EFI System partition
/dev/sda2 1,024,000 1,286,143 262,144 Microsoft Reserved Partition (Windows)
/dev/sda3 1,286,144 304,547,839 303,261,696 Data partition (Windows/Linux)
/dev/sda4 347,746,304 351,649,791 3,903,488 Swap partition (Linux)
/dev/sda5 304,547,840 347,745,105 43,197,266 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disque /dev/sdb : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 1,399,058,688 1,399,056,641 Data partition (Windows/Linux)
/dev/sdb2 1,789,683,712 1,953,523,711 163,840,000 Data partition (Linux)
/dev/sdb3 1,399,060,480 1,789,683,711 390,623,232 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 1E39-18FC vfat BOOT
/dev/sda2
/dev/sda3 B2703C99703C65EF ntfs SSD
/dev/sda4 c351b88e-721b-4aea-9cd9-964647a560c3 swap
/dev/sda5 2f076a6d-221d-40c7-b673-ee1500d38f36 ext4
/dev/sdb1 845828B35828A640 ntfs HDD
/dev/sdb2 20ae83b3-36f8-4216-b242-ee06dba38546 ext4
/dev/sdb3 a7d85848-9595-41fc-b6c4-055029b37ed1 ext4
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 mai 25 16:04 ata-DRW-24D5MT_K3CG6Q92054 -> ../../sr0
lrwxrwxrwx 1 root root 9 mai 25 16:04 ata-INTEL_SSDSC2KW180H6_CVLT626502QJ180BGN -> ../../sda
lrwxrwxrwx 1 root root 10 mai 25 16:04 ata-INTEL_SSDSC2KW180H6_CVLT626502QJ180BGN-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai 25 16:04 ata-INTEL_SSDSC2KW180H6_CVLT626502QJ180BGN-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 25 16:04 ata-INTEL_SSDSC2KW180H6_CVLT626502QJ180BGN-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 mai 25 16:04 ata-INTEL_SSDSC2KW180H6_CVLT626502QJ180BGN-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 mai 25 16:04 ata-INTEL_SSDSC2KW180H6_CVLT626502QJ180BGN-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 mai 25 16:04 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y5FXA1AL -> ../../sdb
lrwxrwxrwx 1 root root 10 mai 25 16:04 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y5FXA1AL-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 mai 25 16:04 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y5FXA1AL-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 mai 25 16:04 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y5FXA1AL-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 9 mai 25 16:04 usb-HP_Photosmart_8100_MY53F2N0DT0486-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 9 mai 25 16:04 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 mai 25 16:04 wwn-0x50014ee2b9047064 -> ../../sdb
lrwxrwxrwx 1 root root 10 mai 25 16:04 wwn-0x50014ee2b9047064-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 mai 25 16:04 wwn-0x50014ee2b9047064-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 mai 25 16:04 wwn-0x50014ee2b9047064-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 9 mai 25 16:04 wwn-0x55cd2e414d0b354f -> ../../sda
lrwxrwxrwx 1 root root 10 mai 25 16:04 wwn-0x55cd2e414d0b354f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai 25 16:04 wwn-0x55cd2e414d0b354f-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 25 16:04 wwn-0x55cd2e414d0b354f-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 mai 25 16:04 wwn-0x55cd2e414d0b354f-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 mai 25 16:04 wwn-0x55cd2e414d0b354f-part5 -> ../../sda5
_________________________ "ls -R /dev/mapper/" output _________________________
None
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda5 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdb3 /stockage ext4 (rw,relatime,data=ordered)
/dev/sdb2 /home ext4 (rw,relatime,data=ordered)
__________________________=== Boot Files Content ===___________________________
___________________________ sda5/boot/grub/grub.cfg: ___________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-2f076a6d-221d-40c7-b673-ee1500d38f36' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 2f076a6d-221d-40c7-b673-ee1500d38f36
else
search --no-floppy --fs-uuid --set=root 2f076a6d-221d-40c7-b673-ee1500d38f36
fi
linux /boot/vmlinuz-4.10.0-21-generic.efi.signed root=UUID=2f076a6d-221d-40c7-b673-ee1500d38f36 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-21-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-1E39-18FC' {
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 1E39-18FC
else
search --no-floppy --fs-uuid --set=root 1E39-18FC
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda5/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=2f076a6d-221d-40c7-b673-ee1500d38f36 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=1E39-18FC /boot/efi vfat umask=0077 0 1
# /home was on /dev/sdb2 during installation
UUID=20ae83b3-36f8-4216-b242-ee06dba38546 /home ext4 defaults 0 2
# /stockage was on /dev/sdb3 during installation
UUID=a7d85848-9595-41fc-b6c4-055029b37ed1 /stockage ext4 defaults 0 2
# swap was on /dev/sda4 during installation
UUID=c351b88e-721b-4aea-9cd9-964647a560c3 none swap sw 0 0
____________________________ sda5/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
_________ Devices which don't seem to have a corresponding hard drive: _________
sdc
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.10.0-21-generic.efi.signed root=UUID=2f076a6d-221d-40c7-b673-ee1500d38f36 ro quiet splash vt.handoff=7
______________________________ Boot-up Statistics ______________________________
Startup finished in 23.798s (firmware) + 3.330s (loader) + 5.279s (kernel) + 8.624s (userspace) = 41.032s
blame, first 10:
udev-configure-printer@-devices-pci0000:00-0000:00:01.3-0000:03:00.0-usb1-1\x2d6-1\x2d6.2.service 7.045s
fwupd.service 1.330s
systemd-resolved.service 888ms
dev-sda5.device 863ms
systemd-timesyncd.service 292ms
systemd-fsck@dev-disk-by\x2duuid-1E39\x2d18FC.service 240ms
systemd-fsck@dev-disk-by\x2duuid-20ae83b3\x2d36f8\x2d4216\x2db242\x2dee06dba38546.service 197ms
networking.service 195ms
systemd-modules-load.service 128ms
keyboard-setup.service 107ms
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @2.529s
2 multi-user.target @2.528s
3 systemd-resolved.service @1.640s +888ms
4 network.target @1.638s
5 NetworkManager.service @1.588s +47ms
6 dbus.service @1.561s
7 basic.target @1.560s
8 sockets.target @1.560s
9 snapd.socket @1.559s +592us
10 sysinit.target @1.557s
11 systemd-timesyncd.service @1.265s +292ms
12 systemd-tmpfiles-setup.service @1.254s +7ms
13 local-fs.target @1.253s
14 run-user-1000-gvfs.mount @3.367s
15 run-user-1000.mount @2.918s
16 local-fs-pre.target @271ms
17 keyboard-setup.service @163ms +107ms
18 systemd-journald.socket @162ms
19 -.mount @149ms
20 system.slice @161ms
21 -.slice @149ms
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 15G 990M 13G 18M 763M 14G
Swap: 1.9G 0B 1.9G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sda1 /boot/efi vfat 495M 29M 467M 6% -
/dev/sda5 / ext4 21G 5.4G 14G 29% 17%
/dev/sdb2 /home ext4 77G 13G 61G 18% 1%
/dev/sdb3 /stockage ext4 184G 63G 112G 36% 1%
Swap partition for hibernation : UUID=c351b88e-721b-4aea-9cd9-964647a560c3
_________________________________ USB devices __________________________________
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 03f0:0941 Hewlett-Packard
Bus 001 Device 004: ID 03f0:ba02 Hewlett-Packard PhotoSmart 8100 series
Bus 001 Device 003: ID 046a:b090 Cherry GmbH
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/10p, 480M
|__ Port 6: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 4, If 1, Class=Vendor Specific Class, Driver=, 12M
|__ Port 2: Dev 4, If 2, Class=Mass Storage, Driver=usb-storage, 12M
|__ Port 2: Dev 4, If 0, Class=Printer, Driver=usblp, 12M
|__ Port 4: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
_______________________________ Wireless Status _______________________________
None
___________________________________ Modules Loaded ____________________________
Module Size Used by
8250_dw 16384 0
aesni_intel 167936 0
aes_x86_64 20480 1 aesni_intel
ahci 36864 5
autofs4 40960 2
btrfs 1093632 0
ccp 57344 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel
crypto_simd 16384 1 aesni_intel
drm 352256 4 nvidia_drm,drm_kms_helper
drm_kms_helper 151552 1 nvidia_drm
edac_core 53248 0
edac_mce_amd 28672 0
fb_sys_fops 16384 1 drm_kms_helper
fjes 73728 0
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
gpio_amdpt 16384 0
gpio_generic 16384 1 gpio_amdpt
hfs 57344 0
hfsplus 106496 0
hid 114688 2 hid_generic,usbhid
hid_generic 16384 0
i2c_designware_core 20480 1 i2c_designware_platform
i2c_designware_platform 16384 0
i2c_piix4 24576 0
input_leds 16384 0
ip_tables 24576 0
irqbypass 16384 1 kvm
jfs 184320 0
kvm 593920 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
mac_hid 16384 0
mii 16384 1 r8169
minix 36864 0
msdos 20480 0
nls_iso8859_1 16384 1
ntfs 102400 0
nvidia 12136448 59 nvidia_modeset,nvidia_uvm
nvidia_drm 49152 1
nvidia_modeset 790528 4 nvidia_drm
nvidia_uvm 647168 0
parport 49152 3 lp,parport_pc,ppdev
parport_pc 32768 1
pcbc 16384 0
ppdev 20480 0
qnx4 16384 0
r8169 81920 0
raid6_pq 114688 1 btrfs
shpchp 36864 0
snd 77824 19 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 49152 1
snd_hda_codec_realtek 90112 1
snd_hda_core 81920 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel 36864 4
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 102400 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
soundcore 16384 1 snd
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
uas 24576 0
ufs 73728 0
usbhid 53248 0
usblp 20480 0
usb_storage 69632 1 uas
wmi 16384 0
xfs 1191936 0
xor 24576 1 btrfs
x_tables 36864 1 ip_tables
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:03.1/0000:22:00.0 ==
modalias : pci:v000010DEd00001C02sv00001462sd00008C95bc03sc00i00
model : GP106 [GeForce GTX 1060 3GB]
vendor : NVIDIA Corporation
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-375 - distro non-free recommended
== cpu-microcode.py ==
driver : amd64-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr,us
variant: oss,
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT=""
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
None
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.10.0.21.23
linux-headers-4.10.0-19 4.10.0-19.21
linux-headers-4.10.0-19-generic 4.10.0-19.21
linux-headers-4.10.0-21 4.10.0-21.23
linux-headers-4.10.0-21-generic 4.10.0-21.23
linux-headers-generic 4.10.0.21.23
linux-image-4.10.0-19-generic 4.10.0-19.21
linux-image-4.10.0-21-generic 4.10.0-21.23
linux-image-extra-4.10.0-19-generic 4.10.0-19.21
linux-image-extra-4.10.0-21-generic 4.10.0-21.23
linux-image-generic 4.10.0.21.23
linux-signed-generic 4.10.0.21.23
linux-signed-image-4.10.0-21-generic 4.10.0-21.23
linux-signed-image-generic 4.10.0.21.23
File list in /boot directory:
abi-4.10.0-19-generic
abi-4.10.0-21-generic
config-4.10.0-19-generic
config-4.10.0-21-generic
efi
grub
initrd.img-4.10.0-19-generic
initrd.img-4.10.0-21-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.10.0-19-generic
System.map-4.10.0-21-generic
vmlinuz-4.10.0-19-generic
vmlinuz-4.10.0-21-generic
vmlinuz-4.10.0-21-generic.efi.signed
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xdd01d000 ACPI=0xdd01d000 SMBIOS=0xde259000 ESRT=0xd9669898 MEMATTR=0xd9416018
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160930/tbfadt-658)
[ 0.000000] ACPI: UEFI 0x00000000DD02F2F0 000042 (v01 00000000 00000000)
[ 0.414833] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.420560] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.426040] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.463986] SCSI subsystem initialized
[ 0.464201] Registered efivars operations
[ 0.503882] pci 0000:04:06.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.503885] pci 0000:04:06.0: BAR 13: failed to assign [io size 0x1000]
[ 0.503887] pci 0000:04:06.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.503889] pci 0000:04:06.0: BAR 13: failed to assign [io size 0x1000]
[ 1.032713] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 2.062784] pciehp 0000:04:06.0:pcie204: Timeout on hotplug command 0x13f1 (issued 1028 msec ago)
[ 3.086817] pciehp 0000:04:06.0:pcie204: Timeout on hotplug command 0x17f1 (issued 1024 msec ago)
[ 3.086883] efifb: probing for efifb
[ 3.086902] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
[ 3.086903] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 3.086903] efifb: scrolling: redraw
[ 3.086904] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.087030] fb0: EFI VGA frame buffer device
[ 3.169457] EFI Variables Facility v0.08 2004-May-17
[ 3.259482] scsi host0: ahci
[ 3.259584] scsi host1: ahci
[ 3.259672] scsi host2: ahci
[ 3.259758] scsi host3: ahci
[ 3.259840] scsi host4: ahci
[ 3.259921] scsi host5: ahci
[ 3.260003] scsi host6: ahci
[ 3.260083] scsi host7: ahci
[ 3.260441] scsi host8: ahci
[ 3.274028] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 3.575017] ata9: SATA link down (SStatus 0 SControl 300)
[ 3.734848] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.736168] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2KW18 036C PQ: 0 ANSI: 5
[ 3.767038] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.767130] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB)
[ 3.768557] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.242862] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.244172] scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[ 4.275145] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.275183] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 4.358759] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.750880] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.757270] scsi 4:0:0:0: CD-ROM ASUS DRW-24D5MT 1.00 PQ: 0 ANSI: 5
[ 4.786125] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.786265] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.786320] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 4.932796] scsi host9: usb-storage 1-6.2:1.2
[ 5.102641] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.788870] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 5.943368] scsi 9:0:0:0: Direct-Access HP Photosmart 8100 1.00 PQ: 0 ANSI: 2
[ 5.946155] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 5.947446] sd 9:0:0:0: [sdc] Attached SCSI removable disk
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ PixArt HP X500 USB Optical Mouse id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ Cherry USB keyboard id=8 [slave keyboard (3)]
↳ Cherry USB keyboard id=9 [slave keyboard (3)]
xrandr:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DVI-D-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.00*+ 59.94 50.00
1680x1050 59.95
1600x900 60.00
1440x900 59.89
1280x1024 75.02 60.02
1280x800 59.81
1280x720 60.00 59.94 50.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x576 50.00
720x480 59.94
640x480 75.00 72.81 59.94
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.021] (==) No Layout section. Using the first Screen section.
[ 7.021] (==) No screen section available. Using defaults.
[ 7.021] (**) |-->Screen "Default Screen Section" (0)
[ 7.021] (**) | |-->Monitor "<default monitor>"
[ 7.021] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.023] (--) PCI:*(0:34:0:0) 10de:1c02:1462:8c95 rev 161, Mem @ 0xfc000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 7.023] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 7.023] (II) LoadModule: "glx"
[ 7.023] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 7.053] (II) LoadModule: "nvidia"
[ 7.053] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 7.053] (II) LoadModule: "nouveau"
[ 7.053] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 7.054] (II) LoadModule: "modesetting"
[ 7.054] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 7.054] (II) LoadModule: "fbdev"
[ 7.054] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 7.054] (II) LoadModule: "vesa"
[ 7.054] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7.055] (II) Loading sub module "fb"
[ 7.055] (II) LoadModule: "fb"
[ 7.055] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.055] (II) Loading sub module "wfb"
[ 7.055] (II) LoadModule: "wfb"
[ 7.055] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 7.055] (II) Loading sub module "ramdac"
[ 7.055] (II) LoadModule: "ramdac"
[ 7.056] (WW) Falling back to old probe method for modesetting
[ 7.056] (WW) Falling back to old probe method for fbdev
[ 7.056] (II) Loading sub module "fbdevhw"
[ 7.056] (II) LoadModule: "fbdevhw"
[ 7.056] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 7.056] (WW) Falling back to old probe method for vesa
[ 7.056] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.813] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 7.821] (II) UnloadModule: "nouveau"
[ 7.821] (II) UnloadModule: "modesetting"
[ 7.821] (II) UnloadModule: "fbdev"
[ 7.821] (II) UnloadModule: "vesa"
[ 7.919] (II) Loading sub module "dri2"
[ 7.919] (II) LoadModule: "dri2"
[ 7.952] (II) LoadModule: "libinput"
[ 7.952] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-21-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-21-generic/updates/dkms
Found nvidia module: nvidia_375_uvm.ko
Is nvidia loaded? yes
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? no
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? yes
Is fglrx kernel module available? no
Is nvidia kernel module available? yes
Vendor/Device Id: 10de:1c02
BusID "PCI:34@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Does it require offloading? no
last cards number = 1
Has amd? no
Has intel? no
Has nvidia? yes
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/nvidia-375/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/nvidia-375/ld.so.conf
Is nvidia enabled? yes
Is nvidia egl enabled? yes
Is fglrx enabled? no
Is mesa enabled? no
Is mesa egl enabled? no
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? yes
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? yes
Is prime egl available? no
Single card detected
Driver is already loaded and enabled
Nothing to do
No change - nothing to do
Nvidia packages and kernel files:
nvidia-375 375.39-0ubuntu5
nvidia-opencl-icd-375 375.39-0ubuntu5
nvidia-prime 0.8.4
nvidia-settings 367.35-0ubuntu1
bbswitch-dkms 0.8-4ubuntu1
Apr 6 18:28 /lib/modules/4.10.0-19-generic/kernel/drivers/video/fbdev/nvidia/nvidiafb.ko
Apr 28 12:41 /lib/modules/4.10.0-21-generic/kernel/drivers/video/fbdev/nvidia/nvidiafb.ko
May 25 00:22 /lib/modules/4.10.0-21-generic/updates/dkms/nvidia_375.ko
May 25 00:22 /lib/modules/4.10.0-21-generic/updates/dkms/nvidia_375_drm.ko
May 25 00:22 /lib/modules/4.10.0-21-generic/updates/dkms/nvidia_375_modeset.ko
May 25 00:22 /lib/modules/4.10.0-21-generic/updates/dkms/nvidia_375_uvm.ko
May 25 00:21 /lib/nvidia-375
============================ Disks SMART Attributes ===========================
### ATA disks: sda sdb
# Drive sda:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: INTEL SSDSC2KW180H6
LU WWN Device Id: 5 5cd2e4 14d0b354f
Firmware Version: LSF036C
User Capacity: 180 045 766 656 bytes [180 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu May 25 16:12:07 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 5
12 Power_Cycle_Count -O--CK 100 100 000 - 78
170 Unknown_Attribute PO--CK 100 100 010 - 0
171 Unknown_Attribute -O--CK 100 100 010 - 0
172 Unknown_Attribute -O--CK 100 100 010 - 0
174 Unknown_Attribute -O--CK 100 100 000 - 6
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 090 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 024 029 000 - 24 (Min/Max 13/29)
192 Power-Off_Retract_Count -O--CK 100 100 000 - 6
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
225 Unknown_SSD_Attribute -O--CK 100 100 000 - 7205
226 Unknown_SSD_Attribute -O--CK 100 100 000 - 0
227 Unknown_SSD_Attribute -O--CK 100 100 000 - 0
228 Power-off_Retract_Count -O--CK 100 100 000 - 0
232 Available_Reservd_Space PO--CK 100 100 010 - 0
233 Media_Wearout_Indicator -O--CK 100 100 000 - 0
241 Total_LBAs_Written -O--CK 100 100 000 - 7205
242 Total_LBAs_Read -O--CK 100 100 000 - 10205
249 Unknown_Attribute -O--CK 100 100 000 - 165
252 Unknown_Attribute -O--CK 100 100 000 - 1
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
# Drive sdb:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD10EZEX-08WN4A0
LU WWN Device Id: 5 0014ee 2b9047064
Firmware Version: 01.01A01
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu May 25 16:12:07 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 174 172 021 - 2258
4 Start_Stop_Count -O--CK 100 100 000 - 96
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 171
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 77
192 Power-Off_Retract_Count -O--CK 200 200 000 - 5
193 Load_Cycle_Count -O--CK 200 200 000 - 233
194 Temperature_Celsius -O---K 115 112 000 - 28
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
### USB disks: sdc
# Drive sdc:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.Tout semble parfait dans ce rapport.
Hors ligne
#25 Le 05/06/2017, à 01:03
- latheon21
Re : [Résolu] Instabilité au démarrage de Kubuntu et Ubuntu 16.04
Bon, je croise les doigts mais ça a l'air de tenir... Le problème venait donc bien apparemment de cette incompatibilité du noyau avec mon proc. Merci beaucoup Malbo pour avoir pointé cela et avoir résolu ce problème !
Je mets à jour mon titre.
Hors ligne