#1 Le 11/05/2017, à 21:00
- Voulfma
Ubuntu pas reconnu après l'installation UEFI !
Bonjour, je vais essayer d’être le plus précis possible.
Etant ennuyé depuis peu par l'univers windows, j'ai voulu goûter a l'univers Linux.
J'ai crée une clé usb ou Ubuntu est bootable dessus.
Je l'installe, tout ce passe bien et lors de la demande de redémarrage de linux (a la fin), windows ce lance comme ça sans demander si on voulait lancer Ubuntu a la place.
Je regarde par le bios et je suis sur UEFI, je décide donc de passer sur Legacy pour voir si il ne serait pas installé sous Legacy, rien du tout.
Je devrais installer le bios d'Ubuntu sous UEFI ou quelque chose comme ça ?
Toute réponse qui peut m'aider serait la bienvenue
Merci
Hors ligne
#2 Le 11/05/2017, à 23:44
- Laurent85
Re : Ubuntu pas reconnu après l'installation UEFI !
Bonjour, démarre une session sur la clé usb d'installation et génère un rapport bisnext, vois la procédure ici https://doc.ubuntu-fr.org/bisnext#insta … onome_live
Hors ligne
#3 Le 12/05/2017, à 19:28
- Voulfma
Re : Ubuntu pas reconnu après l'installation UEFI !
Hors ligne
#4 Le 12/05/2017, à 19:42
- malbo
Re : Ubuntu pas reconnu après l'installation UEFI !
Ton rapport est là :
Posting 932191 from bn-99f26 posted at 2017-05-12 18:25:40 expires: 2017-06-11 18:25:40
May 12, 2017, bisnext report id 99f26
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.4.0-31-generic x86_64 (64 bit gcc: 5.3.1)
Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.1 LTS
Machine: Device: laptop System: Acer product: Aspire E5-573G v: V3.72
Mobo: Acer model: ZORO_BH v: Type2 - A01 Board Version
UEFI: Insyde v: V1.37 date: 02/16/2016
Battery BAT1: charge: 22.6 Wh 100.0% condition: 22.6/25.0 Wh (90%)
volts: 17.3/14.8
model: SANYO AL15A32 status: Full
CPU: Dual core Intel Pentium 3556U (-MCP-) cache: 2048 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 6784
clock speeds: min/max: 800/1700 MHz 1: 1700 MHz 2: 1700 MHz
Memory: Array-1 capacity: 16 GB devices: 2 EC: None
Device-1: ChannelA-DIMM0 size: 8 GB (Single-bank) speed: 1600 MHz
type: DDR3
manufacturer: Hynix/Hyundai part: HMT41GS6BFR8A-PB
Device-2: ChannelB-DIMM0 size: No Module Installed type: N/A
Device-3: N/A size: N/A type: N/A
Device-4: N/A size: N/A type: N/A
Device-5: N/A size: N/A type: N/A
Graphics: Card-1: Intel Haswell-ULT Integrated Graphics Controller
bus-ID: 00:02.0 chip-ID: 8086:0a06
Card-2: NVIDIA GK208M [GeForce 920M]
bus-ID: 04:00.0 chip-ID: 10de:1299
Display Server: X.Org 1.18.3 drivers: intel (unloaded: modesetting,fbdev,vesa) FAILED: nouveau
tty size: 1366x768@60.00hz, 1024x768@60.00hz
GLX Renderer: Mesa DRI Intel Haswell Mobile
GLX Version: 3.0 Mesa 11.2.0 Direct Rendering: Yes
Audio: Card-1 Intel 8 Series HD Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:9c20
Card-2 Intel Haswell-ULT HD Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0 chip-ID: 8086:0a0c
Sound: Advanced Linux Sound Architecture v: k4.4.0-31-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: 4000
bus-ID: 02:00.0 chip-ID: 10ec:8168
IF: enp2s0 state: down mac: <filter>
Card-2: Qualcomm Atheros Device 0042
driver: ath10k_pci bus-ID: 03:00.0 chip-ID: 168c:0042
IF: wlp3s0 state: up speed: N/A duplex: N/A mac: <filter>
Drives: HDD Total Size: 1508.3GB (2.5% used)
ID-1: USB /dev/sda model: Elements_25A2 size: 500.1GB
ID-2: /dev/sdb model: TOSHIBA_MQ01ABD1 size: 1000.2GB
ID-3: USB /dev/sdc model: USB_DISK_2.0 size: 8.0GB
Optical: /dev/sr0 model: HL-DT-ST DVDRAM GUE1N
rev: 1.00 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: /cdrom size: 7.5G used: 1.5G (19%) fs: vfat dev: /dev/sdc1
label: UBUNTU 16_0 uuid: 0205-B914
ID-2: / size: 3.9G used: 221M (6%) fs: overlay dev: /dev/cow
label: N/A uuid: N/A
ID-3: /media/ubuntu/Essentials size: 466G used: 26G (6%) fs: fuseblk dev: /dev/sda1
label: Essentials uuid: 0A448A61448A4EFF
ID-4: swap-1 size: 8.51GB used: 0.00GB (0%) fs: swap dev: /dev/sdb6
label: N/A uuid: d73b6144-d316-4997-80bd-849571560dbb
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/ram0 size: 0.07G label: N/A uuid: N/A
ID-2: /dev/ram1 size: 0.07G label: N/A uuid: N/A
ID-3: /dev/ram2 size: 0.07G label: N/A uuid: N/A
ID-4: /dev/ram3 size: 0.07G label: N/A uuid: N/A
ID-5: /dev/ram4 size: 0.07G label: N/A uuid: N/A
ID-6: /dev/ram5 size: 0.07G label: N/A uuid: N/A
ID-7: /dev/ram6 size: 0.07G label: N/A uuid: N/A
ID-8: /dev/ram7 size: 0.07G label: N/A uuid: N/A
ID-9: /dev/ram8 size: 0.07G label: N/A uuid: N/A
ID-10: /dev/ram9 size: 0.07G label: N/A uuid: N/A
ID-11: /dev/ram10 size: 0.07G label: N/A uuid: N/A
ID-12: /dev/ram11 size: 0.07G label: N/A uuid: N/A
ID-13: /dev/ram12 size: 0.07G label: N/A uuid: N/A
ID-14: /dev/ram13 size: 0.07G label: N/A uuid: N/A
ID-15: /dev/ram14 size: 0.07G label: N/A uuid: N/A
ID-16: /dev/ram15 size: 0.07G label: N/A uuid: N/A
ID-17: /dev/sdb1 size: 0.10G
fs: FAT (32 bit) label: ESP uuid: 3CD2-7D46
ID-18: /dev/sdb2 size: 0.02G label: N/A uuid: N/A
ID-19: /dev/sdb3 size: 598.62G
fs: NTFS label: Acer uuid: B246D3DE46D3A181
ID-20: /dev/sdb4 size: 0.52G
fs: NTFS label: Recovery uuid: 5C6AD6346AD60AA2
ID-21: /dev/sdb5 size: 392.43G
fs: ext4 label: N/A uuid: b38e2472-cb1d-4f8d-b744-dc560f305ac7
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb cdrom:[Ubuntu 16.04.1 LTS _Xenial Xerus_ - Release amd64 (20160719)]/ xenial main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu/ xenial main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu/ xenial-updates main restricted universe multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 16.7% command: firefox pid: 5136 mem: 421.44MB (5.3%)
2: cpu: 4.0% command: compiz pid: 4780 mem: 141.26MB (1.7%)
3: cpu: 3.0% command: Xorg pid: 4345 mem: 66.77MB (0.8%)
4: cpu: 2.2% command: init pid: 1 mem: 6.05MB (0.0%)
5: cpu: 0.8% command: gnome-terminal-server pid: 7286 mem: 34.71MB (0.4%)
6: cpu: 0.6% daemon: ~kworker/1:0~ pid: 14 mem: 0.00MB (0.0%)
7: cpu: 0.4% command: bash pid: 10423 mem: 4.43MB (0.0%)
8: cpu: 0.4% command: nm-applet pid: 4933 mem: 56.53MB (0.7%)
9: cpu: 0.4% command: nautilus pid: 4932 mem: 49.88MB (0.6%)
10: cpu: 0.3% command: NetworkManager pid: 4039 mem: 16.57MB (0.2%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 421.44MB (5.3%) command: firefox pid: 5136 cpu: 16.6%
2: mem: 141.26MB (1.7%) command: compiz pid: 4780 cpu: 4.0%
3: mem: 66.77MB (0.8%) command: Xorg pid: 4345 cpu: 3.0%
4: mem: 58.29MB (0.7%) command: evolution-calendar-factory pid: 4942 cpu: 0.0%
5: mem: 56.53MB (0.7%) command: nm-applet pid: 4933 cpu: 0.4%
6: mem: 50.94MB (0.6%) command: evolution-calendar-factory-subprocess pid: 5017 cpu: 0.0%
7: mem: 49.88MB (0.6%) command: nautilus pid: 4932 cpu: 0.4%
8: mem: 48.61MB (0.6%) command: evolution-calendar-factory-subprocess pid: 5029 cpu: 0.0%
9: mem: 34.71MB (0.4%) command: gnome-terminal-server pid: 7286 cpu: 0.8%
10: mem: 34.12MB (0.4%) command: hud-service pid: 4758 cpu: 0.0%
Info: Processes: 221 Uptime: 9 min Memory: 1002.4/7903.8MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 2001,0003,2002,2003
Boot0001* USB HDD: USB DISK 2.0 PciRoot(0x0)/Pci(0x1d,0x0)/USB(0,0)/USB(3,0)/HD(1,MBR,0x91,0x800,0xeeb800)RC
Boot0002* Unknown Device: HD(1,GPT,80e7aa86-8c6e-4e03-a6da-afeb72d69453,0x800,0x32000)/File(\EFI\ubuntu\shimx64.efi)RC
Boot0003* Windows Boot Manager HD(1,GPT,80e7aa86-8c6e-4e03-a6da-afeb72d69453,0x800,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
vfat partitions details:
/dev/sdb1: LABEL="ESP" UUID="3CD2-7D46" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="80e7aa86-8c6e-4e03-a6da-afeb72d69453"
/dev/sdc1: LABEL="UBUNTU 16_0" UUID="0205-B914" TYPE="vfat" PARTUUID="04cc315b-01"
__________________________________ Secure Boot ________________________________
Secure Boot active
__________________________________ OS prober ________________________________
/dev/sdb1@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
/dev/sdb5:Ubuntu 16.04.1 LTS (16.04):Ubuntu:linux
_____________________________ md5sum of EFI files _____________________________
EFI files in /dev/sdb1:
d73bbea8b6c047d2a706472f87d3ccdb /EFI/ubuntu/fwupx64.efi
34a5c2687e10f4cad35391d68ff32a6c /EFI/ubuntu/grubx64.efi
3aef9c72ad50faa8db576c01f85a0915 /EFI/ubuntu/shimx64.efi
bf39cf9416a9403d40a9b69541486e74 /EFI/ubuntu/mmx64.efi
61c7898dd613614b15cee0081226572c /EFI/ubuntu/fbx64.efi
ccf63a9c02e8ee8835c65c73315883fc /EFI/OEM/Boot/bootmgfw.efi
7e93c0a07734e78206f894900bcb2a9c /EFI/OEM/Boot/bootmgr.efi
7f419e5b77034c54ecfaae2bb57d7dad /EFI/OEM/Boot/memtest.efi
0afd2c9664820c9943273c5aecbcdff6 /EFI/Microsoft/Boot/bootmgr.efi
7cca888cd018f2fcf3be6383f7073d1e /EFI/Microsoft/Boot/memtest.efi
daeabb65729ee4bc93ff21b323761355 /EFI/Microsoft/Boot/bootmgfw.efi
daeabb65729ee4bc93ff21b323761355 /EFI/Boot/bootx64.efi
========================= Boot Information Details ============================
=> Windows 7/8/2012 is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
=> Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi /EFI/ubuntu/mmx64.efi
/EFI/ubuntu/fbx64.efi /EFI/OEM/Boot/bootmgfw.efi
/EFI/OEM/Boot/bootmgr.efi /EFI/OEM/Boot/memtest.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi
/EFI/Microsoft/Boot/bootmgfw.efi /EFI/Boot/bootx64.efi
sdb2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sdb3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Windows/System32/winload.exe
sdb4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sdb6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.03
Boot sector info: Syslinux looks at sector 32784 of /dev/sdc1 for its
second stage. The integrity check of Syslinux failed.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /casper/vmlinuz.efi
/EFI/BOOT/BOOTx64.EFI /EFI/BOOT/grubx64.efi
/ldlinux.sys
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.7 GiB, 500074283008 bytes, 976707584 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 976,705,535 976,703,488 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 206,847 204,800 EFI System partition
/dev/sdb2 206,848 239,615 32,768 Microsoft Reserved Partition (Windows)
/dev/sdb3 239,616 1,169,424,772 1,169,185,157 Data partition (Windows/Linux)
/dev/sdb4 R 1,952,499,712 1,953,523,711 1,024,000 Windows Recovery Environment (Windows)
/dev/sdb5 1,169,426,432 1,935,886,335 766,459,904 Data partition (Linux)
/dev/sdb6 1,935,886,336 1,952,499,711 16,613,376 Swap partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 7.5 GiB, 8011120640 bytes, 15646720 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 2,048 15,646,719 15,644,672 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 0A448A61448A4EFF ntfs Essentials
/dev/sdb1 3CD2-7D46 vfat ESP
/dev/sdb2
/dev/sdb3 B246D3DE46D3A181 ntfs Acer
/dev/sdb4 5C6AD6346AD60AA2 ntfs Recovery
/dev/sdb5 b38e2472-cb1d-4f8d-b744-dc560f305ac7 ext4
/dev/sdb6 d73b6144-d316-4997-80bd-849571560dbb swap
/dev/sdc1 0205-B914 vfat UBUNTU 16_0
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 May 12 18:16 ata-HL-DT-ST_DVDRAM_GUE1N_KXUG5C91202 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 12 18:16 ata-TOSHIBA_MQ01ABD100_36HWTZ8AT -> ../../sdb
lrwxrwxrwx 1 root root 10 May 12 18:16 ata-TOSHIBA_MQ01ABD100_36HWTZ8AT-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 May 12 18:16 ata-TOSHIBA_MQ01ABD100_36HWTZ8AT-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 May 12 18:16 ata-TOSHIBA_MQ01ABD100_36HWTZ8AT-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 May 12 18:16 ata-TOSHIBA_MQ01ABD100_36HWTZ8AT-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 10 May 12 18:16 ata-TOSHIBA_MQ01ABD100_36HWTZ8AT-part5 -> ../../sdb5
lrwxrwxrwx 1 root root 10 May 12 18:16 ata-TOSHIBA_MQ01ABD100_36HWTZ8AT-part6 -> ../../sdb6
lrwxrwxrwx 1 root root 9 May 12 18:16 usb-_USB_DISK_2.0_07BB0F01B2DE6485-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 May 12 18:16 usb-_USB_DISK_2.0_07BB0F01B2DE6485-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 May 12 18:16 usb-WD_Elements_25A2_5758413141383635595A585A-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 May 12 18:16 usb-WD_Elements_25A2_5758413141383635595A585A-0:0-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 May 12 18:16 wwn-0x50000396e1f875b2 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 12 18:16 wwn-0x50000396e1f875b2-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 May 12 18:16 wwn-0x50000396e1f875b2-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 May 12 18:16 wwn-0x50000396e1f875b2-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 May 12 18:16 wwn-0x50000396e1f875b2-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 10 May 12 18:16 wwn-0x50000396e1f875b2-part5 -> ../../sdb5
lrwxrwxrwx 1 root root 10 May 12 18:16 wwn-0x50000396e1f875b2-part6 -> ../../sdb6
lrwxrwxrwx 1 root root 9 May 12 18:16 wwn-0x5001480000000000 -> ../../sr0
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sdc1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda1 /media/ubuntu/Essentials fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
__________________________=== Boot Files Content ===___________________________
___________________________ sdb5/boot/grub/grub.cfg: ___________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b38e2472-cb1d-4f8d-b744-dc560f305ac7' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt5 --hint-efi=hd1,gpt5 --hint-baremetal=ahci1,gpt5 b38e2472-cb1d-4f8d-b744-dc560f305ac7
else
search --no-floppy --fs-uuid --set=root b38e2472-cb1d-4f8d-b744-dc560f305ac7
fi
linux /boot/vmlinuz-4.4.0-77-generic.efi.signed root=UUID=b38e2472-cb1d-4f8d-b744-dc560f305ac7 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-77-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sdb1)' --class windows --class os $menuentry_id_option 'osprober-efi-3CD2-7D46' {
insmod part_gpt
insmod fat
set root='hd1,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt1 --hint-efi=hd1,gpt1 --hint-baremetal=ahci1,gpt1 3CD2-7D46
else
search --no-floppy --fs-uuid --set=root 3CD2-7D46
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sdb5/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb5 during installation
UUID=b38e2472-cb1d-4f8d-b744-dc560f305ac7 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sdb1 during installation
UUID=3CD2-7D46 /boot/efi vfat umask=0077 0 1
# swap was on /dev/sdb6 during installation
UUID=d73b6144-d316-4997-80bd-849571560dbb none swap sw 0 0
____________________________ sdb5/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
___________________________ sdc1/boot/grub/grub.cfg: ___________________________
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash ---
initrd /casper/initrd.lz
}
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
______________________________ Boot-up Statistics ______________________________
Startup finished in 7.408s (firmware) + 5.337s (loader) + 29.508s (kernel) + 4.118s (userspace) = 46.373s
blame, first 10:
upower.service 40.097s
dev-sdb6.device 2.794s
dev-loop0.device 2.702s
dev-sdc1.device 2.505s
alsa-restore.service 2.275s
ModemManager.service 2.068s
accounts-daemon.service 1.645s
networking.service 1.462s
systemd-logind.service 1.356s
thermald.service 1.353s
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @3.949s
2 multi-user.target @3.948s
3 getty.target @3.946s
4 getty@tty1.service @3.946s
5 rc-local.service @3.931s +4ms
6 network.target @3.917s
7 NetworkManager.service @2.763s +1.153s
8 dbus.service @1.838s
9 basic.target @1.768s
10 sockets.target @1.768s
11 snapd.socket @1.730s +33ms
12 sysinit.target @1.728s
13 apparmor.service @1.483s +244ms
14 local-fs.target @1.482s
15 tmp.mount @1.479s +2ms
16 local-fs-pre.target @1.461s
17 lvm2-monitor.service @302ms +1.158s
18 lvm2-lvmetad.service @714ms
19 system.slice @290ms
20 -.slice @287ms
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 7.7G 848M 5.2G 518M 1.7G 6.1G
Swap: 7.9G 0B 7.9G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/cow / overlay 3.9G 221M 3.7G 6% 1%
/dev/loop0 /rofs squashfs 1.4G 1.4G 0 100% 100%
/dev/sdb5 /tmp/bisnext-ItSbiSLk/mnt/sdb5 ext4 360G 4.2G 338G 2% 1%
/dev/sdc1 /cdrom vfat 7.5G 1.5G 6.1G 19% -
_________________________________ USB devices __________________________________
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 1058:25a2 Western Digital Technologies, Inc.
Bus 003 Device 002: ID 05e3:0612 Genesys Logic, Inc.
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 008: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 002 Device 007: ID 04f2:b526 Chicony Electronics Co., Ltd
Bus 002 Device 005: ID 04ca:3015 Lite-On Technology Corp.
Bus 002 Device 003: ID 13fe:3e00 Kingston Technology Company Inc. Flash Drive
Bus 002 Device 006: ID 093a:2521 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 004: ID 1430:0150 RedOctane wireless receiver for skylanders wii
Bus 002 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
|__ Port 2: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
|__ Port 3: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 480M
|__ Port 2: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 4: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 5: Dev 5, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 5: Dev 5, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 7: Dev 7, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 7: Dev 7, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 8: Dev 8, If 0, Class=Vendor Specific Class, Driver=rtsx_usb, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
_______________________________ Wireless Status _______________________________
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: acer-wireless: Wireless LAN
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
___________________________________ Modules Loaded ____________________________
Module Size Used by
8250_dw 16384 0
acer_wmi 20480 0
acpi_pad 20480 0
ahci 36864 2
ansi_cprng 16384 0
arc4 16384 2
ath10k_core 311296 1 ath10k_pci
ath10k_pci 45056 0
ath 32768 1 ath10k_core
autofs4 40960 2
bluetooth 520192 29 bnep,btbcm,btrtl,btusb,rfcomm,btintel
bnep 20480 2
btbcm 16384 1 btusb
btintel 16384 1 btusb
btrfs 987136 0
btrtl 16384 1 btusb
btusb 45056 0
ccm 20480 1
cfg80211 565248 3 ath,mac80211,ath10k_core
coretemp 16384 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 20480 0
ctr 16384 1
dell_smo8800 16384 0
dm_log 20480 2 dm_region_hash,dm_mirror
dm_mirror 24576 0
dm_region_hash 24576 1 dm_mirror
drbg 32768 1
drm 360448 9 ttm,i915,drm_kms_helper,nouveau
drm_kms_helper 147456 2 i915,nouveau
dw_dmac 16384 0
dw_dmac_core 24576 1 dw_dmac
fb_sys_fops 16384 1 drm_kms_helper
fjes 28672 0
hfs 57344 0
hfsplus 106496 0
hid 118784 4 i2c_hid,hid_multitouch,hid_generic,usbhid
hid_generic 16384 0
hid_multitouch 20480 0
i2c_algo_bit 16384 2 i915,nouveau
i2c_designware_core 20480 1 i2c_designware_platform
i2c_designware_platform 16384 0
i2c_hid 20480 0
i915 1208320 5
input_leds 16384 0
intel_powerclamp 16384 0
intel_rapl 20480 0
irqbypass 16384 1 kvm
jfs 180224 0
joydev 20480 0
kvm 536576 1 kvm_intel
kvm_intel 172032 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
lpc_ich 24576 0
mac80211 737280 1 ath10k_core
mac_hid 16384 0
media 24576 2 uvcvideo,videodev
mei 98304 1 mei_me
mei_me 36864 0
memstick 20480 1 rtsx_usb_ms
mii 16384 1 r8169
minix 36864 0
msdos 20480 0
mxm_wmi 16384 1 nouveau
nls_iso8859_1 16384 1
nls_utf8 16384 0
nouveau 1495040 1
ntfs 98304 0
overlay 49152 1
parport 49152 3 lp,ppdev,parport_pc
parport_pc 32768 0
ppdev 20480 0
qnx4 16384 0
r8169 81920 0
raid6_pq 102400 1 btrfs
rfcomm 69632 2
rtsx_usb 24576 2 rtsx_usb_sdmmc,rtsx_usb_ms
rtsx_usb_ms 20480 0
rtsx_usb_sdmmc 28672 0
sdhci 45056 1 sdhci_acpi
sdhci_acpi 16384 0
serio_raw 16384 0
shpchp 36864 0
snd 81920 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
snd_hda_codec 135168 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_codec_generic 77824 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 53248 1
snd_hda_codec_realtek 86016 1
snd_hda_core 73728 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hda_intel 36864 5
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 106496 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 32768 2 snd_pcm,snd_seq
soundcore 16384 1 snd
sparse_keymap 16384 1 acer_wmi
spi_pxa2xx_platform 24576 0
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
tpm_crb 16384 0
ttm 94208 1 nouveau
uas 24576 0
ufs 73728 0
usbhid 49152 0
usb_storage 69632 2 uas
uvcvideo 90112 0
v4l2_common 16384 1 videobuf2_v4l2
video 40960 3 i915,acer_wmi,nouveau
videobuf2_core 36864 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 28672 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 176128 4 uvcvideo,v4l2_common,videobuf2_core,videobuf2_v4l2
wmi 20480 3 acer_wmi,mxm_wmi,nouveau
x86_pkg_temp_thermal 16384 0
xfs 970752 0
xor 24576 1 btrfs
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0 ==
model : GK208M [GeForce 920M]
vendor : NVIDIA Corporation
modalias : pci:v000010DEd00001299sv00001025sd00000988bc03sc02i00
driver : nvidia-375 - distro non-free recommended
driver : xserver-xorg-video-nouveau - distro free builtin
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=en_US.UTF-8
LANGUAGE=
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
/etc/default/locale:
LANG="en_US.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="us"
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
Live Session
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 461 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.4.0.31.33
linux-headers-4.4.0-31 4.4.0-31.50
linux-headers-4.4.0-31-generic 4.4.0-31.50
linux-headers-generic 4.4.0.31.33
linux-image-4.4.0-31-generic 4.4.0-31.50
linux-image-extra-4.4.0-31-generic 4.4.0-31.50
linux-image-generic 4.4.0.31.33
linux-signed-generic 4.4.0.31.33
linux-signed-image-4.4.0-31-generic 4.4.0-31.50
linux-signed-image-generic 4.4.0.31.33
File list in /boot directory:
abi-4.4.0-31-generic
config-4.4.0-31-generic
grub
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.4.0-31-generic
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.40 by INSYDE Corp.
[ 0.000000] efi: SMBIOS=0x9c663000 ESRT=0x9c76f518 ACPI 2.0=0x9cffd014
[ 0.000000] ACPI: UEFI 0x000000009CFFB000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: UEFI 0x000000009CFFA000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.159376] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.164938] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.164947] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.165012] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 4.371938] ACPI : EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
[ 4.372408] SCSI subsystem initialized
[ 11.835074] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 11.836177] efifb: probing for efifb
[ 11.836197] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 4128k, total 4128k
[ 11.836199] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 11.836200] efifb: scrolling: redraw
[ 11.836202] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 11.842447] fb0: EFI VGA frame buffer device
[ 11.872486] EFI Variables Facility v0.08 2004-May-17
[ 11.909132] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.system_keyring'
[ 11.909162] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.system_keyring'
[ 11.909171] EFI: Loaded cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5' linked to '.system_keyring'
[ 11.909182] EFI: Loaded cert 'Acer: c4f0474ae6b5e67a509d99132f49a4ec13f7ac68' linked to '.system_keyring'
[ 11.909522] EFI: Loaded cert 'LINPUS: 967f81f2f4f5ac0f24fca5e42982e4ad1e56ddff' linked to '.system_keyring'
[ 11.909854] EFI: Loaded cert 'Quanta NB4: 073d6a4c306ea5b9499e861c7ba55cde' linked to '.system_keyring'
[ 11.910689] EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.system_keyring'
[ 11.912041] EFI: Loaded cert 'Acer Database Forbidden: 9de028a2638669f109745d3e2a7ad5c9e64ed392' linked to '.system_blacklist_keyring'
[ 12.139086] fb: switching to inteldrmfb from EFI VGA
[ 12.147365] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 12.147432] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 12.147515] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 12.147721] pci 0000:04:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 12.197368] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS
[ 12.293163] scsi host0: ahci
[ 12.325208] scsi host1: ahci
[ 12.637834] scsi host2: usb-storage 3-2.3:1.0
[ 12.665145] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 12.677167] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 12.865844] scsi host3: usb-storage 2-4:1.0
[ 13.657092] scsi 2:0:0:0: Direct-Access WD Elements 25A2 1014 PQ: 0 ANSI: 6
[ 13.678685] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 13.679060] sd 2:0:0:0: [sda] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[ 13.857385] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 3J PQ: 0 ANSI: 5
[ 13.857728] sd 0:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 13.857943] sd 0:0:0:0: Attached scsi generic sg1 type 0
[ 13.860073] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE1N 1.00 PQ: 0 ANSI: 5
[ 13.870211] scsi 3:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
[ 13.870491] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 13.871091] sd 3:0:0:0: [sdc] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 13.879792] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 13.884728] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 13.884844] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 13.884900] sr 1:0:0:0: Attached scsi generic sg3 type 5
[ 13.911068] sd 0:0:0:0: [sdb] Attached SCSI disk
[ 18.968881] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 18.969010] ACPI: \_SB_.PCI0.RP05.PXSX: failed to evaluate _DSM
[ 18.969016] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 19.546880] sd 2:0:0:0: [sda] Attached SCSI disk
[ 25.976476] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 25.976612] ACPI: \_SB_.PCI0.RP05.PXSX: failed to evaluate _DSM
[ 25.976618] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 36.423184] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
[ 37.010718] ath10k_pci 0000:03:00.0: pci irq msi interrupts 1 irq_mode 0 reset_mode 0
[ 37.349553] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[ 43.775814] usb 2-8: reset high-speed USB device number 8 using xhci_hcd
[ 43.955620] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 43.955762] ACPI: \_SB_.PCI0.RP05.PXSX: failed to evaluate _DSM
[ 43.955768] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 48.887278] usb 2-8: device descriptor read/64, error -110
[ 64.106503] usb 2-8: device descriptor read/64, error -110
[ 64.326550] usb 2-8: reset high-speed USB device number 8 using xhci_hcd
[ 69.438301] usb 2-8: device descriptor read/64, error -110
[ 78.756156] wlp3s0: RX AssocResp from b8:26:6c:4d:0a:c1 (capab=0x411 status=0 aid=2)
[ 84.653485] usb 2-8: device descriptor read/64, error -110
[ 84.869442] usb 2-8: reset high-speed USB device number 8 using xhci_hcd
[ 582.385821] squashfs: SQUASHFS error: Can't find a SQUASHFS superblock on sdb2
>>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[ 582.746219] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 582.746348] ACPI: \_SB_.PCI0.RP05.PXSX: failed to evaluate _DSM
[ 582.746353] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 586.013680] squashfs: SQUASHFS error: Can't find a SQUASHFS superblock on sdb2
>>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ USB OPTICAL MOUSE id=11 [slave pointer (2)]
⎜ ↳ ELAN0501:00 04F3:300B Touchpad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Power Button id=9 [slave keyboard (3)]
↳ Sleep Button id=10 [slave keyboard (3)]
↳ HD WebCam id=12 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=14 [slave keyboard (3)]
↳ Acer WMI hotkeys id=15 [slave keyboard (3)]
xrandr:
Screen 0: minimum 8 x 8, current 2390 x 768, maximum 32767 x 32767
eDP1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 60.00*+
1360x768 59.80 59.96
1280x720 60.00
1024x768 60.00
1024x576 60.00
960x540 60.00
800x600 60.32 56.25
864x486 60.00
640x480 59.94
720x405 60.00
680x384 60.00
640x360 60.00
DP1 connected 1024x768+1366+0 (normal left inverted right x axis y axis) 304mm x 228mm
1024x768 60.00*+ 75.08 70.07
832x624 74.55
800x600 75.00 60.32
640x480 75.00 60.00 59.94
720x400 70.08
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 33.699] (==) No Layout section. Using the first Screen section.
[ 33.699] (==) No screen section available. Using defaults.
[ 33.699] (**) |-->Screen "Default Screen Section" (0)
[ 33.699] (**) | |-->Monitor "<default monitor>"
[ 33.699] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 33.770] (--) PCI:*(0:0:2:0) 8086:0a06:1025:0987 rev 11, Mem @ 0xb3400000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[ 33.770] (--) PCI: (0:4:0:0) 10de:1299:1025:0988 rev 161, Mem @ 0xb2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 33.770] (II) LoadModule: "glx"
[ 33.773] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 33.882] (II) LoadModule: "intel"
[ 33.883] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 33.915] (II) LoadModule: "nvidia"
[ 33.916] (WW) Warning, couldn't open module nvidia
[ 33.916] (II) UnloadModule: "nvidia"
[ 33.916] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 33.916] (II) LoadModule: "nouveau"
[ 33.916] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 33.927] (II) LoadModule: "modesetting"
[ 33.927] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 33.932] (II) LoadModule: "fbdev"
[ 33.932] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 33.932] (II) LoadModule: "vesa"
[ 33.932] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 33.936] (II) LoadModule: "intel"
[ 33.936] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 33.936] (II) UnloadModule: "intel"
[ 33.936] (II) LoadModule: "nvidia"
[ 33.936] (WW) Warning, couldn't open module nvidia
[ 33.936] (II) UnloadModule: "nvidia"
[ 33.936] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 33.936] (II) LoadModule: "nouveau"
[ 33.936] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 33.936] (II) UnloadModule: "nouveau"
[ 33.936] (II) LoadModule: "modesetting"
[ 33.936] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 33.937] (II) UnloadModule: "modesetting"
[ 33.937] (II) LoadModule: "fbdev"
[ 33.937] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 33.937] (II) UnloadModule: "fbdev"
[ 33.937] (II) LoadModule: "vesa"
[ 33.937] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 33.937] (II) UnloadModule: "vesa"
[ 33.962] (WW) Falling back to old probe method for modesetting
[ 33.962] (WW) Falling back to old probe method for fbdev
[ 33.962] (II) Loading sub module "fbdevhw"
[ 33.962] (II) LoadModule: "fbdevhw"
[ 33.962] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 33.969] (WW) Falling back to old probe method for vesa
[ 33.976] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 33.980] (II) intel(0): Output eDP1 has no monitor section
[ 34.000] (II) intel(0): Output HDMI1 has no monitor section
[ 34.000] (II) intel(0): Output DP1 has no monitor section
[ 34.000] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 34.000] (II) Loading sub module "dri2"
[ 34.000] (II) LoadModule: "dri2"
[ 34.000] (II) Loading sub module "present"
[ 34.000] (II) LoadModule: "present"
[ 34.000] (II) Loading sub module "dri2"
[ 34.000] (II) LoadModule: "dri2"
[ 34.000] (II) Loading sub module "fb"
[ 34.000] (II) LoadModule: "fb"
[ 34.001] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 34.003] (II) Loading sub module "shadowfb"
[ 34.003] (II) LoadModule: "shadowfb"
[ 34.003] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 34.004] (II) UnloadModule: "modesetting"
[ 34.004] (II) UnloadModule: "fbdev"
[ 34.004] (II) UnloadModule: "vesa"
[ 34.444] (II) Loading sub module "exa"
[ 34.444] (II) LoadModule: "exa"
[ 34.444] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 34.445] (II) EXA(256): Driver allocated offscreen pixmaps
[ 34.445] (II) UploadToScreen
[ 34.445] (II) DownloadFromScreen
[ 34.445] (EE) NOUVEAU(G0): [XvMC] Failed to initialize extension.
[ 34.602] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 34.608] (II) intel(0): Setting screen physical size to 361 x 203
[ 34.747] (II) LoadModule: "evdev"
[ 34.747] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 34.818] (**) ELAN0501:00 04F3:300B Touchpad: Applying InputClass "evdev touchscreen catchall"
[ 34.818] (II) LoadModule: "synaptics"
[ 34.819] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.4.0-31-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.4.0-31-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? yes
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:a06
BusID "PCI:0@0:2:0"
Is boot vga? yes
Vendor/Device Id: 10de:1299
BusID "PCI:4@0:0:0"
Is boot vga? no
Skipping "/dev/dri/card1", driven by "nouveau"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card1", driven by "nouveau"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card1", driven by "nouveau"
Number of connected outputs for /dev/dri/card1: 0
Skipping "/dev/dri/card1", driven by "nouveau"
Found "/dev/dri/card0", driven by "i915"
output 0:
eDP connector
output 1:
DisplayPort connector
Number of connected outputs for /dev/dri/card0: 2
Does it require offloading? yes
I couldn't open /var/lib/ubuntu-drivers-common/last_gfx_boot for reading.
Create /var/lib/ubuntu-drivers-common/last_gfx_boot for the 1st time
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? yes
How many cards? 2
The number of cards has changed!
Has the system changed? Yes
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
System configuration has changed
Intel IGP detected
Desktop system detected
or laptop with open drivers
Discrete NVIDIA card detected
System configuration has changed
Removing xorg.conf. Path: /etc/X11/xorg.conf
Moved /etc/X11/xorg.conf to /etc/X11/xorg.conf.05122017
==============================================================================
# System Information for Ubuntu 16.04.1 LTS in /dev/sdb5
==============================================================================
_____________________________ Upgradable Packages _____________________________
No data available.
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.4.0.77.83
linux-headers-4.4.0-31 4.4.0-31.50
linux-headers-4.4.0-31-generic 4.4.0-31.50
linux-headers-4.4.0-77 4.4.0-77.98
linux-headers-4.4.0-77-generic 4.4.0-77.98
linux-headers-generic 4.4.0.77.83
linux-image-4.4.0-31-generic 4.4.0-31.50
linux-image-4.4.0-77-generic 4.4.0-77.98
linux-image-extra-4.4.0-31-generic 4.4.0-31.50
linux-image-extra-4.4.0-77-generic 4.4.0-77.98
linux-image-generic 4.4.0.77.83
linux-signed-generic 4.4.0.77.83
linux-signed-image-4.4.0-77-generic 4.4.0-77.98
linux-signed-image-generic 4.4.0.77.83
File list in /boot directory:
abi-4.4.0-31-generic
abi-4.4.0-77-generic
config-4.4.0-31-generic
config-4.4.0-77-generic
efi
grub
initrd.img-4.4.0-31-generic
initrd.img-4.4.0-77-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.4.0-31-generic
System.map-4.4.0-77-generic
vmlinuz-4.4.0-31-generic
vmlinuz-4.4.0-77-generic
vmlinuz-4.4.0-77-generic.efi.signed
__________________________________ Locales ___________________________________
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
BACKSPACE="guess"
_________________________________ System Logs ________________________________
Selection of relevent log entries:
None
_____________________________________ Xorg ____________________________________
============================ Disks SMART Attributes ===========================
### ATA disks: sdb
# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-31-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD100
LU WWN Device Id: 5 000039 6e1f875b2
Firmware Version: AX003J
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri May 12 18:25:38 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1729
4 Start_Stop_Count -O--CK 100 100 000 - 1327
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 097 097 000 - 1243
10 Spin_Retry_Count PO--CK 126 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 538
191 G-Sense_Error_Rate -O--CK 100 100 000 - 280
192 Power-Off_Retract_Count -O--CK 100 100 000 - 39
193 Load_Cycle_Count -O--CK 100 100 000 - 2176
194 Temperature_Celsius -O---K 100 100 000 - 36 (Min/Max 17/50)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 0
222 Loaded_Hours -O--CK 098 098 000 - 1195
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 265
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
### USB disks: sda sdc
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-31-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Elements / My Passport (USB)
Device Model: WDC WD5000BMVW-11AJGS4
LU WWN Device Id: 5 0014ee 2b88f5500
Firmware Version: 01.01A01
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri May 12 18:25:38 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0
3 Spin_Up_Time POS--K 136 118 021 - 4191
4 Start_Stop_Count -O--CK 100 100 000 - 391
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 393
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 92
192 Power-Off_Retract_Count -O--CK 200 200 000 - 12
193 Load_Cycle_Count -O--CK 200 200 000 - 758
194 Temperature_Celsius -O---K 117 113 000 - 30
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
# Drive sdc:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-31-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
=============================== StdErr Messages ===============================
E: Couldn't create temporary file to work with /var/lib/apt/lists/fr.archive.ubuntu.com_ubuntu_dists_xenial_InRelease - mkstemp (30: Read-only file system)
E: The package lists or status file could not be parsed or opened.
Si le nom complet de ton modèle est Acer Aspire E5-573G-P35U, il y a une discussion sur l'install de ce modèle ici : https://forum.ubuntu-fr.org/viewtopic.php?id=2002807
Dernière modification par malbo (Le 12/05/2017, à 19:48)
Hors ligne
#5 Le 12/05/2017, à 19:58
- Laurent85
Re : Ubuntu pas reconnu après l'installation UEFI !
pc Acer il faut intervenir au niveau du bios pour déclarer Ubuntu comme système légitime, ça passe par création d'un mot de passe pour avoir accès à d'autres options, suis cette procédure https://forum.ubuntu-fr.org/viewtopic.p … #p21468818
https://ubuntuforums.org/showthread.php … st13628297
Désactive aussi Secure Boot dans le bios sinon l'installation du pilote Nvidia dans Pilotes additionnels ne marchera pas comme attendu.
Hors ligne
#6 Le 15/05/2017, à 14:35
- Voulfma
Re : Ubuntu pas reconnu après l'installation UEFI !
Salut !
Désolé du temps de réponse.
Comme tu l'a dit Laurent85 Il faut intervenir au niveau du bios !
Merci a vous ! <3
Hors ligne
#7 Le 15/05/2017, à 15:15
- malbo
Re : Ubuntu pas reconnu après l'installation UEFI !
Bonjour,
Pour qu'on ait l'état final de ton install, je te prie de faire un Boot-Info depuis une session de ton Ubuntu installé et de donner l'URL de ce Boot-Info dans ta réponse. Cela donnera un exemple d'install réussie pour ceux qui ont le même modèle ou un modèle approchant. A ce sujet, je t'ai questionné dans le post #4 sur le nom complet de ton modèle. Peux-tu répondre ?
Dernière modification par malbo (Le 15/05/2017, à 15:20)
Hors ligne