#26 Le 22/05/2017, à 17:39
- nam1962
Re : [résolu] Pas moyen d'installer correctement Ubuntu 16.04
Tu as bien lu, la sauvegarde est une précaution indispensable au cas ou un truc rate.
Il faut d'ailleurs faire au moins une sauvegarde par semaine, pas besoin d'attendre les grands travaux pour ça - Pour les sauvegardes je recommande d'ailleurs BackInTime.
Maintenant, après tu n'as pas dû tout lire car, oui on peut préserver le /home c'est une des beautés de GNU/Linux qui sépare administration de utilisation. ---> https://doc.ubuntu-fr.org/reinstallation_ubuntu
On peut même changer de distribution en préservant ses données !
[ Modéré ]
Hors ligne
#27 Le 22/05/2017, à 17:50
- Laurent85
Re : [résolu] Pas moyen d'installer correctement Ubuntu 16.04
hmm je déconseille la méthode 1, il faut faire place nette quand on réinstalle un système pour ne pas se retrouver avec une pollution provenant d'anciens fichiers système. On est pile là avec le cas de pierrotm dans l'illustration qu'il ne faut pas, c'est une mauvaise idée.
Hors ligne
#28 Le 22/05/2017, à 18:08
- pierrotm
Re : [résolu] Pas moyen d'installer correctement Ubuntu 16.04
Ah ben je m'apprêtais à suivre la méthode 1, donc je stoppe...
J'ai sauvegardé mon /home, un peu lourd, sur un disque dur externe. Peut-être que ce qui serait bien consisterait après la mise à jour à le recharger sur une partition séparée à partir de la sauvegarde. Car, si j'en juge par l'avertissement de la doc, déplacer le /home existant sur une partition séparée est une opération délicate et peu recommandée.
Ai-je bien compris ?
Pierrotm
Hors ligne
#29 Le 22/05/2017, à 18:17
- nam1962
Re : [résolu] Pas moyen d'installer correctement Ubuntu 16.04
...entre la méthode 1 et recopier un /home sauvegardé, quelle est la différence ? 
Pour faire tout bien, il faudrait effectivement avoir des.config tous neufs, mais....
- on perd tout ses réglages
- aller chercher ses données un peu partout est fastidieux.
Bref...
(la bécane sur laquelle j'écris ce post est passée de Xub devel à Manjaro unstable, puis OpenSUSE et retour Manjaro, avec le même /home depuis 2013...)
[ Modéré ]
Hors ligne
#30 Le 22/05/2017, à 19:11
- Laurent85
Re : [résolu] Pas moyen d'installer correctement Ubuntu 16.04
nam1962 a écrit :
...entre la méthode 1 et recopier un /home sauvegardé, quelle est la différence ?
Méthode 1 = risque de pollution du système
Restaurer /home = pas de risque de pollution du système
Hors ligne
#31 Le 22/05/2017, à 19:20
- nam1962
Re : [résolu] Pas moyen d'installer correctement Ubuntu 16.04
Qu'appelles-tu "risque de pollution du système" (en dehors du fait que recopier le /home mettra dans la même situation que garder le /home) ?
[ Modéré ]
Hors ligne
#32 Le 22/05/2017, à 19:42
- Laurent85
Re : [résolu] Pas moyen d'installer correctement Ubuntu 16.04
Relis mon message #16
Hors ligne
#33 Le 22/05/2017, à 20:32
- nam1962
Re : [résolu] Pas moyen d'installer correctement Ubuntu 16.04
Ah ouiche, je pensais à la situation avec /home séparé (ce que je fais sur toutes mes installs pour les raisons précitées.)
[ Modéré ]
Hors ligne
#34 Le 22/05/2017, à 20:50
- pierrotm
Re : [résolu] Pas moyen d'installer correctement Ubuntu 16.04
Bon ben,
Merci pour tout, tous deux. Je vais mettre à niveau, puis récupérer le /home que j'ai sauvegardé. Je mettrai un message pour dire si ça s'est, cette fois, bien passé (et j'espère ajouter "Résolu").
Et puis j'installerai BackinTime pour faire de la sauvegarde, comme Nam le conseille.
À plus,
Pierrotm
Hors ligne
#35 Le 10/06/2017, à 09:04
- xubu1957
Re : [résolu] Pas moyen d'installer correctement Ubuntu 16.04
Bonjour,
Copies pour historique, si besoin pour comparer avec : problème d'extinction avec un dual-boot
Fixe :
Posting 933457 from bn-e3c82 posted at 2017-05-21 10:36:35 expires: 2017-06-20 10:36:35
May 21, 2017, bisnext report id e3c82
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.8.0-36-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine: Device: desktop Mobo: Gigabyte model: B85M-D3H v: x.x
UEFI: American Megatrends v: F14 date: 09/19/2014
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Dual core Intel Core i3-4170 (-HT-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 14765
clock speeds: min/max: 800/3700 MHz 1: 803 MHz 2: 847 MHz
3: 833 MHz 4: 803 MHz
Memory: Array-1 capacity: 32 GB devices: 4 EC: None
Device-1: ChannelA-DIMM0 size: No Module Installed type: N/A
Device-2: ChannelA-DIMM1 size: 4 GB speed: 1333 MHz type: DDR3
manufacturer: Kingston part: 99U5474-028.A00LF
Device-3: ChannelB-DIMM0 size: No Module Installed type: N/A
Device-4: ChannelB-DIMM1 size: 4 GB speed: 1333 MHz type: DDR3
manufacturer: Kingston part: 99U5474-028.A00LF
Graphics: Card: Intel 4th Generation Core Processor Family Integrated Graphics Controller
bus-ID: 00:02.0 chip-ID: 8086:041e
Display Server: X.Org 1.18.4 drivers: modesetting (unloaded: fbdev,vesa)
tty size: 1920x1080@60.00hz
GLX Renderer: Mesa DRI Intel Haswell
GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:8c20
Card-2 Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0 chip-ID: 8086:0c0c
Sound: Advanced Linux Sound Architecture v: k4.8.0-36-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: e000
bus-ID: 02:00.0 chip-ID: 10ec:8168
IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1007.9GB (0.9% used)
ID-1: /dev/sda model: ST1000DM003 size: 1000.2GB
ID-2: USB /dev/sdb model: USB_DISK_2.0 size: 7.7GB
Optical: /dev/sr0 model: HL-DT-ST DVDRAM GH24NSD1
rev: LG00 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 94x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: /media/ubuntu/USB DISK size: 7.3G used: 547M (8%) fs: vfat dev: /dev/sdb1
label: USB DISK uuid: 6024-AF8E
ID-2: swap-1 size: 8.47GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
label: N/A uuid: a97ffc46-240e-45ed-a468-1e22034412f2
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/ram0 size: 0.07G label: N/A uuid: N/A
ID-2: /dev/ram1 size: 0.07G label: N/A uuid: N/A
ID-3: /dev/ram2 size: 0.07G label: N/A uuid: N/A
ID-4: /dev/ram3 size: 0.07G label: N/A uuid: N/A
ID-5: /dev/ram4 size: 0.07G label: N/A uuid: N/A
ID-6: /dev/ram5 size: 0.07G label: N/A uuid: N/A
ID-7: /dev/ram6 size: 0.07G label: N/A uuid: N/A
ID-8: /dev/ram7 size: 0.07G label: N/A uuid: N/A
ID-9: /dev/ram8 size: 0.07G label: N/A uuid: N/A
ID-10: /dev/ram9 size: 0.07G label: N/A uuid: N/A
ID-11: /dev/ram10 size: 0.07G label: N/A uuid: N/A
ID-12: /dev/ram11 size: 0.07G label: N/A uuid: N/A
ID-13: /dev/ram12 size: 0.07G label: N/A uuid: N/A
ID-14: /dev/ram13 size: 0.07G label: N/A uuid: N/A
ID-15: /dev/ram14 size: 0.07G label: N/A uuid: N/A
ID-16: /dev/ram15 size: 0.07G label: N/A uuid: N/A
ID-17: /dev/sda1 size: 523.03G
fs: ext4 label: N/A uuid: 41e3108e-3e9a-4cef-ad1d-f3f50cef5d50
ID-18: /dev/sda6 size: 468.71G
fs: ext4 label: N/A uuid: b54110fd-1826-4b2c-95ec-98f58340dfb1
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb cdrom:[Ubuntu 16.04.2 LTS _Xenial Xerus_ - Release amd64 (20170215.2)]/ xenial main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu/ xenial main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu/ xenial-updates main restricted universe multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 1.2% command: compiz pid: 2131 mem: 138.16MB (1.7%)
2: cpu: 0.9% command: Xorg pid: 1516 mem: 71.07MB (0.9%)
3: cpu: 0.5% command: USB (started by: gedit) pid: 2749 mem: 35.53MB (0.4%)
4: cpu: 0.5% command: init pid: 1 mem: 5.80MB (0.0%)
5: cpu: 0.3% command: bash pid: 5255 mem: 4.39MB (0.0%)
6: cpu: 0.3% command: gnome-terminal-server pid: 2619 mem: 33.76MB (0.4%)
7: cpu: 0.3% command: nautilus pid: 2205 mem: 52.56MB (0.6%)
8: cpu: 0.1% command: ibus-ui-gtk3 pid: 2079 mem: 28.75MB (0.3%)
9: cpu: 0.1% command: unity-panel-service pid: 2057 mem: 35.40MB (0.4%)
10: cpu: 0.1% command: unity-settings-daemon pid: 2045 mem: 34.41MB (0.4%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 138.16MB (1.7%) command: compiz pid: 2131 cpu: 1.2%
2: mem: 71.07MB (0.9%) command: Xorg pid: 1516 cpu: 0.9%
3: mem: 58.11MB (0.7%) command: evolution-calendar-factory pid: 2391 cpu: 0.0%
4: mem: 52.56MB (0.6%) command: nautilus pid: 2205 cpu: 0.3%
5: mem: 50.69MB (0.6%) command: evolution-calendar-factory-subprocess pid: 2453 cpu: 0.0%
6: mem: 48.78MB (0.6%) command: evolution-calendar-factory-subprocess pid: 2440 cpu: 0.0%
7: mem: 37.75MB (0.4%) command: hud-service pid: 2043 cpu: 0.1%
8: mem: 35.53MB (0.4%) command: USB (started by: gedit) pid: 2749 cpu: 0.5%
9: mem: 35.40MB (0.4%) command: unity-panel-service pid: 2057 cpu: 0.1%
10: mem: 34.41MB (0.4%) command: unity-settings-daemon pid: 2045 cpu: 0.1%
Info: Processes: 230 Uptime: 13 min Memory: 692.6/7867.2MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0004
Timeout: 1 seconds
BootOrder: 0004,0003,0002
Boot0002* Hard Drive BBS(HD,,0x0)AMGOAMNO........o.S.T.1.0.0.0.D.M.0.0.3.-.1.E.R.1.6.2....................A...........................>..Gd-.;.A..MQ..L. . . . . . . . . . . . .4.Z.9.Y.B.Y.R.L......AMBO
Boot0003* CD/DVD Drive BBS(CDROM,,0x0)AMGOAMNO........o.H.L.-.D.T.-.S.T. .D.V.D.R.A.M. .G.H.2.4.N.S.D.1....................A...........................>..Gd-.;.A..MQ..L.1.K.F.A.E.7.0.A.4.0. .1. . . . . . . . ......AMBO
Boot0004* UEFI: HL-DT-ST DVDRAM GH24NSD1 PciRoot(0x0)/Pci(0x1f,0x2)/Sata(4,65535,0)/CDROM(1,0xe18,0x1300)AMBO
vfat partition details:
/dev/sdb1: LABEL="USB DISK" UUID="6024-AF8E" TYPE="vfat" PARTUUID="c3072e18-01"
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
/dev/sda1:Ubuntu 16.04 LTS (16.04):Ubuntu:linux
/dev/sda6:Ubuntu 14.04.5 LTS (14.04):Ubuntu1:linux
_____________________________ md5sum of EFI files _____________________________
None
========================= Boot Information Details ============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location. It also
embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
(,msdos6)/boot/grub
---------------------------------------------------------------------------
=> Windows 2000/XP/2003 is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows XP: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,021,538,696 1,021,536,649 83 Linux
/dev/sda2 1,021,540,350 1,953,523,711 931,983,362 5 Extended
/dev/sda5 1,936,988,160 1,953,523,711 16,535,552 82 Linux swap / Solaris
/dev/sda6 1,021,540,352 1,936,988,159 915,447,808 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 7.2 GiB, 7743995904 bytes, 15124992 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 8,064 15,124,991 15,116,928 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 41e3108e-3e9a-4cef-ad1d-f3f50cef5d50 ext4
/dev/sda5 a97ffc46-240e-45ed-a468-1e22034412f2 swap
/dev/sda6 b54110fd-1826-4b2c-95ec-98f58340dfb1 ext4
/dev/sdb1 6024-AF8E vfat USB DISK
/dev/sr0 2017-02-15-21-44-13-00 iso9660 Ubuntu 16.04.2 LTS amd64
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 May 21 10:23 ata-HL-DT-ST_DVDRAM_GH24NSD1_K1AF7EA0041 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 21 10:23 ata-ST1000DM003-1ER162_Z4Y9YBLR -> ../../sda
lrwxrwxrwx 1 root root 10 May 21 10:24 ata-ST1000DM003-1ER162_Z4Y9YBLR-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 21 10:24 ata-ST1000DM003-1ER162_Z4Y9YBLR-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 21 10:24 ata-ST1000DM003-1ER162_Z4Y9YBLR-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 May 21 10:24 ata-ST1000DM003-1ER162_Z4Y9YBLR-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 May 21 10:28 usb-_USB_DISK_2.0_0705327F13378299-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 21 10:28 usb-_USB_DISK_2.0_0705327F13378299-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 May 21 10:23 wwn-0x5000c500870fc93c -> ../../sda
lrwxrwxrwx 1 root root 10 May 21 10:24 wwn-0x5000c500870fc93c-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 21 10:24 wwn-0x5000c500870fc93c-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 21 10:24 wwn-0x5000c500870fc93c-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 May 21 10:24 wwn-0x5000c500870fc93c-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 May 21 10:23 wwn-0x5001480000000000 -> ../../sr0
_________________________ "ls -R /dev/mapper/" output _________________________
None
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /media/ubuntu/USB DISK vfat (rw,nosuid,nodev,relatime,uid=999,gid=999,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2)
__________________________=== Boot Files Content ===___________________________
___________________________ sda1/boot/grub/grub.cfg: ___________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-41e3108e-3e9a-4cef-ad1d-f3f50cef5d50' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 41e3108e-3e9a-4cef-ad1d-f3f50cef5d50
else
search --no-floppy --fs-uuid --set=root 41e3108e-3e9a-4cef-ad1d-f3f50cef5d50
fi
linux /boot/vmlinuz-4.4.0-59-generic root=UUID=41e3108e-3e9a-4cef-ad1d-f3f50cef5d50 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-59-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda1/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=41e3108e-3e9a-4cef-ad1d-f3f50cef5d50 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=a97ffc46-240e-45ed-a468-1e22034412f2 none swap sw 0 0
____________________________ sda1/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
___________________________ sda6/boot/grub/grub.cfg: ___________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b54110fd-1826-4b2c-95ec-98f58340dfb1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 b54110fd-1826-4b2c-95ec-98f58340dfb1
else
search --no-floppy --fs-uuid --set=root b54110fd-1826-4b2c-95ec-98f58340dfb1
fi
linux /boot/vmlinuz-4.4.0-78-generic root=UUID=b54110fd-1826-4b2c-95ec-98f58340dfb1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-78-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 b54110fd-1826-4b2c-95ec-98f58340dfb1
else
search --no-floppy --fs-uuid --set=root b54110fd-1826-4b2c-95ec-98f58340dfb1
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 b54110fd-1826-4b2c-95ec-98f58340dfb1
else
search --no-floppy --fs-uuid --set=root b54110fd-1826-4b2c-95ec-98f58340dfb1
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 16.04 LTS (16.04) (sur /dev/sda1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-41e3108e-3e9a-4cef-ad1d-f3f50cef5d50' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 41e3108e-3e9a-4cef-ad1d-f3f50cef5d50
else
search --no-floppy --fs-uuid --set=root 41e3108e-3e9a-4cef-ad1d-f3f50cef5d50
fi
linux /boot/vmlinuz-4.4.0-59-generic root=UUID=41e3108e-3e9a-4cef-ad1d-f3f50cef5d50 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-59-generic
}
_______________________________ sda6/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=b54110fd-1826-4b2c-95ec-98f58340dfb1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=a97ffc46-240e-45ed-a468-1e22034412f2 none swap sw 0 0
____________________________ sda6/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
______________________________ Boot-up Statistics ______________________________
Startup finished in 45.929s (kernel) + 1min 5.874s (userspace) = 1min 51.803s
blame, first 10:
dev-sda5.device 1min 5.844s
dev-sr0.device 1min 4.417s
dev-loop0.device 1min 4.413s
snapd.autoimport.service 43.904s
NetworkManager.service 35.827s
ModemManager.service 34.266s
udev-configure-printer@-devices-pci0000:00-0000:00:14.0-usb3-3\x2d10.service 32.777s
alsa-restore.service 30.582s
accounts-daemon.service 27.773s
thermald.service 21.986s
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @1min 5.829s
2 multi-user.target @1min 5.829s
3 getty.target @57.782s
4 getty@tty1.service @57.781s
5 rc-local.service @57.774s +2ms
6 network.target @57.749s
7 NetworkManager.service @21.921s +35.827s
8 dbus.service @17.995s
9 basic.target @17.562s
10 sockets.target @17.562s
11 snapd.socket @17.555s +3ms
12 sysinit.target @17.554s
13 apparmor.service @9.314s +8.216s
14 local-fs.target @9.310s
15 tmp.mount @9.305s +3ms
16 local-fs-pre.target @9.304s
17 lvm2-monitor.service @2.583s +6.719s
18 lvm2-lvmetad.service @8.702s
19 lvm2-lvmetad.socket @2.582s
20 -.slice @1.447s
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 7.7G 570M 5.6G 459M 1.5G 6.4G
Swap: 7.9G 0B 7.9G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
aufs / aufs 3.9G 180M 3.7G 5% 1%
/dev/loop0 /rofs squashfs 1.4G 1.4G 0 100% 100%
/dev/sda1 /tmp/bisnext-PetbSTuH/mnt/sda1 ext4 480G 44G 412G 10% 2%
/dev/sda6 /tmp/bisnext-PetbSTuH/mnt/sda6 ext4 430G 36G 373G 9% 2%
/dev/sr0 /cdrom iso9660 1.5G 1.5G 0 100% -
_________________________________ USB devices __________________________________
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 046d:c062 Logitech, Inc. M-UAS144 [LS1 Laser Mouse]
Bus 003 Device 002: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 003 Device 004: ID 04f9:02e8 Brother Industries, Ltd
Bus 003 Device 005: ID 13fe:4100 Kingston Technology Company Inc. Flash drive
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
|__ Port 1: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 3: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 3: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 9: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 10: Dev 4, If 1, Class=Vendor Specific Class, Driver=, 480M
|__ Port 10: Dev 4, If 2, Class=Vendor Specific Class, Driver=, 480M
|__ Port 10: Dev 4, If 0, Class=Printer, Driver=usblp, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
_______________________________ Wireless Status _______________________________
None
___________________________________ Modules Loaded ____________________________
Module Size Used by
ablk_helper 16384 1 aesni_intel
aesni_intel 167936 0
aes_x86_64 20480 1 aesni_intel
ahci 36864 4
aufs 241664 5247
autofs4 40960 2
btrfs 1056768 0
coretemp 16384 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 24576 3 ablk_helper,ghash_clmulni_intel,aesni_intel
dm_log 20480 2 dm_mirror,dm_region_hash
dm_mirror 24576 0
dm_region_hash 24576 1 dm_mirror
drm 368640 8 i915,drm_kms_helper
drm_kms_helper 167936 1 i915
fb_sys_fops 16384 1 drm_kms_helper
fjes 28672 0
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
hfs 57344 0
hfsplus 106496 0
hid 122880 2 hid_generic,usbhid
hid_generic 16384 0
i2c_algo_bit 16384 1 i915
i915 1310720 97
input_leds 16384 0
intel_cstate 16384 0
intel_rapl 20480 0
intel_rapl_perf 16384 0
irqbypass 16384 1 kvm
isofs 40960 1
jfs 184320 0
kvm 598016 1 kvm_intel
kvm_intel 192512 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
lpc_ich 24576 0
lrw 16384 1 aesni_intel
mac_hid 16384 0
mei 102400 1 mei_me
mei_me 40960 0
mii 16384 1 r8169
minix 40960 0
msdos 20480 0
nls_iso8859_1 16384 0
nls_utf8 16384 1
ntfs 102400 0
parport 49152 3 lp,parport_pc,ppdev
parport_pc 32768 1
ppdev 20480 0
psmouse 139264 0
qnx4 16384 0
r8169 81920 0
raid6_pq 102400 1 btrfs
serio_raw 16384 0
shpchp 36864 0
snd 86016 21 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
snd_hda_codec 135168 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 45056 1
snd_hda_codec_realtek 86016 1
snd_hda_core 86016 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel 36864 5
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 110592 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
soundcore 16384 1 snd
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
tpm_infineon 20480 0
uas 24576 0
ufs 73728 0
usbhid 53248 0
usblp 20480 0
usb_storage 73728 1 uas
video 40960 1 i915
x86_pkg_temp_thermal 16384 0
xfs 1048576 0
xor 24576 1 btrfs
______________________________ Additional Drivers _____________________________
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=en_US.UTF-8
LANGUAGE=
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
/etc/default/locale:
LANG="en_US.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="us"
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
Live Session
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 212 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic-hwe-16.04 4.8.0.36.8
linux-headers-4.8.0-36 4.8.0-36.36~16.04.1
linux-headers-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-headers-generic-hwe-16.04 4.8.0.36.8
linux-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-generic-hwe-16.04 4.8.0.36.8
linux-signed-generic-hwe-16.04 4.8.0.36.8
linux-signed-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-signed-image-generic-hwe-16.04 4.8.0.36.8
File list in /boot directory:
abi-4.8.0-36-generic
config-4.8.0-36-generic
grub
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.8.0-36-generic
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xda9bb000 ACPI 2.0=0xda9bb000 SMBIOS=0xf04c0 MPS=0xfd440
[ 0.130251] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.132596] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.152363] SCSI subsystem initialized
[ 3.707232] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 3.707639] efifb: probing for efifb
[ 3.707651] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[ 3.707652] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 3.707652] efifb: scrolling: redraw
[ 3.707653] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.709656] fb0: EFI VGA frame buffer device
[ 3.800512] EFI Variables Facility v0.08 2004-May-17
[ 3.883559] scsi host0: ahci
[ 3.883645] scsi host1: ahci
[ 3.883713] scsi host2: ahci
[ 3.883777] scsi host3: ahci
[ 3.883837] scsi host4: ahci
[ 3.883901] scsi host5: ahci
[ 3.897358] fb: switching to inteldrmfb from EFI VGA
[ 4.197749] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.197768] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.198578] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 4.198580] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.198581] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 4.199365] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 4.199366] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.199367] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 4.202019] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 4.202020] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.202021] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 4.206226] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSD1 LG00 PQ: 0 ANSI: 5
[ 4.220819] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 4.220821] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.220821] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 4.222590] sr 4:0:0:0: [sr0] scsi3-mmc drive: 47x/94x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.222737] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.222817] sr 4:0:0:0: Attached scsi generic sg0 type 5
[ 4.222961] scsi 5:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[ 4.251205] sd 5:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 4.251222] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 4.292031] sd 5:0:0:0: [sda] Attached SCSI disk
[ 327.376081] scsi host6: usb-storage 3-1:1.0
[ 328.489411] scsi 6:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
[ 328.490517] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 329.750109] sd 6:0:0:0: [sdb] 15124992 512-byte logical blocks: (7.74 GB/7.21 GiB)
[ 329.774684] sd 6:0:0:0: [sdb] Attached SCSI removable disk
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=10 [slave pointer (2)]
⎜ ↳ Logitech USB Laser Mouse id=11 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Logitech USB Receiver id=9 [slave keyboard (3)]
xrandr:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
VGA-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
1920x1080 60.00*+
1680x1050 59.95
1280x1024 75.02 60.02
1440x900 74.98 59.89
1280x720 60.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 72.81 66.67 59.94
720x400 70.08
HDMI-1 disconnected (normal left inverted right x axis y axis)
HDMI-2 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 109.073] (==) No Layout section. Using the first Screen section.
[ 109.073] (==) No screen section available. Using defaults.
[ 109.073] (**) |-->Screen "Default Screen Section" (0)
[ 109.073] (**) | |-->Monitor "<default monitor>"
[ 109.073] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 111.405] (--) PCI:*(0:0:2:0) 8086:041e:1458:d000 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 111.405] (II) LoadModule: "glx"
[ 111.406] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 115.004] (II) LoadModule: "modesetting"
[ 115.005] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 115.006] (II) LoadModule: "fbdev"
[ 115.006] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 115.388] (II) LoadModule: "vesa"
[ 115.389] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 115.422] (WW) Falling back to old probe method for fbdev
[ 115.422] (II) Loading sub module "fbdevhw"
[ 115.422] (II) LoadModule: "fbdevhw"
[ 115.423] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 115.475] (WW) Falling back to old probe method for vesa
[ 115.475] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 115.475] (II) Loading sub module "glamoregl"
[ 115.475] (II) LoadModule: "glamoregl"
[ 115.475] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 118.322] (II) modeset(0): Output VGA-1 has no monitor section
[ 118.323] (II) modeset(0): Output HDMI-1 has no monitor section
[ 118.324] (II) modeset(0): Output HDMI-2 has no monitor section
[ 118.337] (II) modeset(0): Monitor name: Philips 247E4
[ 118.338] (II) Loading sub module "fb"
[ 118.338] (II) LoadModule: "fb"
[ 118.338] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 118.461] (II) UnloadModule: "fbdev"
[ 118.461] (II) UnloadModule: "vesa"
[ 118.579] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 118.624] (II) modeset(0): Setting screen physical size to 508 x 285
[ 122.494] (II) LoadModule: "evdev"
[ 122.494] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-36-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-36-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:41e
BusID "PCI:0@0:2:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
card0-VGA-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
I couldn't open /var/lib/ubuntu-drivers-common/last_gfx_boot for reading.
Create /var/lib/ubuntu-drivers-common/last_gfx_boot for the 1st time
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? Yes
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
System configuration has changed
Single card detected
Nothing to do
No change - nothing to do
==============================================================================
# System Information for Ubuntu 16.04 LTS in /dev/sda1
==============================================================================
_____________________________ Upgradable Packages _____________________________
No data available.
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.4.0.21.22
linux-headers-4.4.0-21 4.4.0-21.37
linux-headers-4.4.0-21-generic 4.4.0-21.37
linux-headers-generic 4.4.0.21.22
linux-image-4.4.0-21-generic 4.4.0-21.37
linux-image-extra-4.4.0-21-generic 4.4.0-21.37
linux-image-generic 4.4.0.21.22
File list in /boot directory:
abi-3.16.0-76-generic
abi-3.16.0-77-generic
abi-4.4.0-21-generic
abi-4.4.0-36-generic
abi-4.4.0-38-generic
abi-4.4.0-42-generic
abi-4.4.0-45-generic
abi-4.4.0-47-generic
abi-4.4.0-51-generic
abi-4.4.0-53-generic
abi-4.4.0-57-generic
abi-4.4.0-59-generic
config-3.16.0-76-generic
config-3.16.0-77-generic
config-4.4.0-21-generic
config-4.4.0-36-generic
config-4.4.0-38-generic
config-4.4.0-42-generic
config-4.4.0-45-generic
config-4.4.0-47-generic
config-4.4.0-51-generic
config-4.4.0-53-generic
config-4.4.0-57-generic
config-4.4.0-59-generic
grub
initrd.img-3.16.0-76-generic
initrd.img-3.16.0-77-generic
initrd.img-4.4.0-21-generic
initrd.img-4.4.0-36-generic
initrd.img-4.4.0-38-generic
initrd.img-4.4.0-42-generic
initrd.img-4.4.0-45-generic
initrd.img-4.4.0-47-generic
initrd.img-4.4.0-51-generic
initrd.img-4.4.0-53-generic
initrd.img-4.4.0-57-generic
initrd.img-4.4.0-59-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-3.16.0-76-generic
System.map-3.16.0-77-generic
System.map-4.4.0-21-generic
System.map-4.4.0-36-generic
System.map-4.4.0-38-generic
System.map-4.4.0-42-generic
System.map-4.4.0-45-generic
System.map-4.4.0-47-generic
System.map-4.4.0-51-generic
System.map-4.4.0-53-generic
System.map-4.4.0-57-generic
System.map-4.4.0-59-generic
vmlinuz-3.16.0-76-generic
vmlinuz-3.16.0-77-generic
vmlinuz-4.4.0-21-generic
vmlinuz-4.4.0-36-generic
vmlinuz-4.4.0-38-generic
vmlinuz-4.4.0-42-generic
vmlinuz-4.4.0-45-generic
vmlinuz-4.4.0-47-generic
vmlinuz-4.4.0-51-generic
vmlinuz-4.4.0-53-generic
vmlinuz-4.4.0-57-generic
vmlinuz-4.4.0-59-generic
__________________________________ Locales ___________________________________
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""
BACKSPACE="guess"
_________________________________ System Logs ________________________________
Selection of relevent log entries:
None
_____________________________________ Xorg ____________________________________
==============================================================================
# System Information for Ubuntu 14.04.5 LTS in /dev/sda6
==============================================================================
_____________________________ Upgradable Packages _____________________________
gir1.2-gtk-3.0 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libgail-3-0 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libgtk-3-0 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libgtk-3-bin 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libgtk-3-common 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libmm-glib0 1.0.0-2ubuntu1.1 from:1.0.0-2ubuntu1
libnautilus-extension1a 1:3.10.1-0ubuntu9.11 from:1:3.10.1-0ubuntu9.6
modemmanager 1.0.0-2ubuntu1.1 from:1.0.0-2ubuntu1
nautilus 1:3.10.1-0ubuntu9.11 from:1:3.10.1-0ubuntu9.6
nautilus-data 1:3.10.1-0ubuntu9.11 from:1:3.10.1-0ubuntu9.6
oneconf 0.3.7.14.04.1 from:0.3.7
oneconf-common 0.3.7.14.04.1 from:0.3.7
python-oneconf 0.3.7.14.04.1 from:0.3.7
python3-oneconf 0.3.7.14.04.1 from:0.3.7
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
None
__________________ Configuration files of uninstalled packages: ________________
Package Version
libegl1-mesa-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libgbm1-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libgl1-mesa-dri-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libgl1-mesa-glx-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libglapi-mesa-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libgles1-mesa-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libgles2-mesa-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libopenvg1-mesa-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libwayland-egl1-mesa-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libxatracker2-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
linux-image-3.16.0-30-generic 3.16.0-30.40~14.04.1
linux-image-3.16.0-77-generic 3.16.0-77.99~14.04.1
linux-image-4.4.0-59-generic 4.4.0-59.80~14.04.1
linux-image-4.4.0-62-generic 4.4.0-62.83~14.04.1
linux-image-4.4.0-63-generic 4.4.0-63.84~14.04.2
linux-image-4.4.0-64-generic 4.4.0-64.85~14.04.1
linux-image-4.4.0-66-generic 4.4.0-66.87~14.04.1
linux-image-4.4.0-67-generic 4.4.0-67.88~14.04.1
linux-image-4.4.0-70-generic 4.4.0-70.91~14.04.1
linux-image-4.4.0-71-generic 4.4.0-71.92~14.04.1
linux-image-4.4.0-72-generic 4.4.0-72.93~14.04.1
linux-image-extra-3.16.0-30-generic 3.16.0-30.40~14.04.1
linux-image-extra-3.16.0-77-generic 3.16.0-77.99~14.04.1
linux-image-extra-4.4.0-59-generic 4.4.0-59.80~14.04.1
linux-image-extra-4.4.0-62-generic 4.4.0-62.83~14.04.1
linux-image-extra-4.4.0-63-generic 4.4.0-63.84~14.04.2
linux-image-extra-4.4.0-64-generic 4.4.0-64.85~14.04.1
linux-image-extra-4.4.0-66-generic 4.4.0-66.87~14.04.1
linux-image-extra-4.4.0-67-generic 4.4.0-67.88~14.04.1
linux-image-extra-4.4.0-70-generic 4.4.0-70.91~14.04.1
linux-image-extra-4.4.0-71-generic 4.4.0-71.92~14.04.1
linux-image-extra-4.4.0-72-generic 4.4.0-72.93~14.04.1
xserver-xorg-core-lts-utopic 2:1.16.0-1ubuntu1.2~trusty2
xserver-xorg-lts-utopic 1:7.7+7ubuntu2~trusty1
xserver-xorg-video-intel-lts-utopic 2:2.99.914-1~exp1ubuntu4.5~trusty1
xserver-xorg-video-modesetting-lts-utopic 0.9.0-1build1~trusty1
xserver-xorg-video-openchrome-lts-utopic 1:0.3.3-1build2~trusty1
xserver-xorg-video-vmware-lts-utopic 1:13.0.2-3ubuntu1~trusty1
Use the following command to clean old configuration files:
sudo apt purge libegl1-mesa-lts-utopic:i386 libgbm1-lts-utopic:i386 libgl1-mesa-dri-lts-utopic:i386 libgl1-mesa-glx-lts-utopic:i386 libglapi-mesa-lts-utopic:i386 libgles1-mesa-lts-utopic:i386 libgles2-mesa-lts-utopic:i386 libopenvg1-mesa-lts-utopic:i386 libwayland-egl1-mesa-lts-utopic:i386 libxatracker2-lts-utopic:i386 linux-image-3.16.0-30-generic linux-image-3.16.0-77-generic linux-image-4.4.0-59-generic linux-image-4.4.0-62-generic linux-image-4.4.0-63-generic linux-image-4.4.0-64-generic linux-image-4.4.0-66-generic linux-image-4.4.0-67-generic linux-image-4.4.0-70-generic linux-image-4.4.0-71-generic linux-image-4.4.0-72-generic linux-image-extra-3.16.0-30-generic linux-image-extra-3.16.0-77-generic linux-image-extra-4.4.0-59-generic linux-image-extra-4.4.0-62-generic linux-image-extra-4.4.0-63-generic linux-image-extra-4.4.0-64-generic linux-image-extra-4.4.0-66-generic linux-image-extra-4.4.0-67-generic linux-image-extra-4.4.0-70-generic linux-image-extra-4.4.0-71-generic linux-image-extra-4.4.0-72-generic xserver-xorg-core-lts-utopic xserver-xorg-lts-utopic xserver-xorg-video-intel-lts-utopic xserver-xorg-video-modesetting-lts-utopic xserver-xorg-video-openchrome-lts-utopic xserver-xorg-video-vmware-lts-utopic
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic-lts-xenial 4.4.0.78.63
linux-headers-4.4.0-75 4.4.0-75.96~14.04.1
linux-headers-4.4.0-75-generic 4.4.0-75.96~14.04.1
linux-headers-4.4.0-78 4.4.0-78.99~14.04.2
linux-headers-4.4.0-78-generic 4.4.0-78.99~14.04.2
linux-headers-generic-lts-xenial 4.4.0.78.63
linux-image-4.4.0-75-generic 4.4.0-75.96~14.04.1
linux-image-4.4.0-78-generic 4.4.0-78.99~14.04.2
linux-image-extra-4.4.0-75-generic 4.4.0-75.96~14.04.1
linux-image-extra-4.4.0-78-generic 4.4.0-78.99~14.04.2
linux-image-generic-lts-xenial 4.4.0.78.63
File list in /boot directory:
abi-4.4.0-75-generic
abi-4.4.0-78-generic
config-4.4.0-75-generic
config-4.4.0-78-generic
grub
initrd.img-4.4.0-75-generic
initrd.img-4.4.0-78-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.4.0-75-generic
System.map-4.4.0-78-generic
vmlinuz-4.4.0-75-generic
vmlinuz-4.4.0-78-generic
__________________________________ Locales ___________________________________
/etc/default/locale:
LANG="fr_FR.UTF-8"
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""
_________________________________ System Logs ________________________________
Selection of relevent log entries:
May 21 11:17:01 pierrotm-B85M-D3H CRON[2811]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 21 12:14:51 pierrotm-B85M-D3H kernel: [ 5085.837996] scsi host6: usb-storage 3-5:1.0
May 21 12:14:52 pierrotm-B85M-D3H kernel: [ 5086.924762] scsi 6:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
May 21 12:14:52 pierrotm-B85M-D3H kernel: [ 5086.925750] sd 6:0:0:0: Attached scsi generic sg2 type 0
May 21 12:14:54 pierrotm-B85M-D3H kernel: [ 5088.142019] sd 6:0:0:0: [sdb] 15124992 512-byte logical blocks: (7.74 GB/7.21 GiB)
May 21 12:14:54 pierrotm-B85M-D3H kernel: [ 5088.165428] sd 6:0:0:0: [sdb] Attached SCSI removable disk
May 21 12:14:54 pierrotm-B85M-D3H kernel: [ 5088.475313] systemd-hostnamed[3159]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
May 21 12:17:02 pierrotm-B85M-D3H CRON[3227]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 21 12:21:38 pierrotm-B85M-D3H kernel: [ 5492.099247] systemd-hostnamed[3252]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
_____________________________________ Xorg ____________________________________
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.480] (==) No Layout section. Using the first Screen section.
[ 13.480] (==) No screen section available. Using defaults.
[ 13.480] (**) |-->Screen "Default Screen Section" (0)
[ 13.480] (**) | |-->Monitor "<default monitor>"
[ 13.539] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.566] (--) PCI:*(0:0:2:0) 8086:041e:1458:d000 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 13.566] (II) LoadModule: "glx"
[ 13.702] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.062] (II) LoadModule: "intel"
[ 14.062] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 14.107] (II) LoadModule: "modesetting"
[ 14.107] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 14.136] (II) LoadModule: "fbdev"
[ 14.136] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 14.178] (II) LoadModule: "vesa"
[ 14.178] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 14.192] (WW) Falling back to old probe method for modesetting
[ 14.192] (WW) Falling back to old probe method for fbdev
[ 14.192] (II) Loading sub module "fbdevhw"
[ 14.192] (II) LoadModule: "fbdevhw"
[ 14.192] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 14.210] (WW) Falling back to old probe method for vesa
[ 14.211] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 14.211] (II) intel(0): Output VGA1 has no monitor section
[ 14.211] (II) intel(0): Output HDMI1 has no monitor section
[ 14.211] (II) intel(0): Output HDMI2 has no monitor section
[ 14.211] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 14.211] (II) Loading sub module "dri2"
[ 14.211] (II) LoadModule: "dri2"
[ 14.211] (II) Loading sub module "present"
[ 14.212] (II) LoadModule: "present"
[ 14.212] (II) UnloadModule: "modesetting"
[ 14.212] (II) UnloadModule: "fbdev"
[ 14.212] (II) UnloadModule: "vesa"
[ 14.505] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14.510] (II) intel(0): Setting screen physical size to 507 x 285
[ 14.650] (II) LoadModule: "evdev"
[ 14.651] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5494.880] (II) UnloadModule: "evdev"
[ 5494.880] (II) UnloadModule: "evdev"
[ 5494.880] (II) UnloadModule: "evdev"
[ 5494.880] (II) UnloadModule: "evdev"
[ 5494.880] (II) UnloadModule: "evdev"
[ 5494.880] (II) UnloadModule: "evdev"
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.4.0-78-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.4.0-78-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:41e
BusID "PCI:0@0:2:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
card0-VGA-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? No
main_arch_path i386-linux-gnu, other_arch_path x86_64-linux-gnu
Current alternative: /usr/lib/i386-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/i386-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
Single card detected
Nothing to do
No change - nothing to do
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-1ER162
LU WWN Device Id: 5 000c50 0870fc93c
Firmware Version: CC45
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun May 21 10:36:33 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 108 099 006 - 18449328
3 Spin_Up_Time PO---- 097 097 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 480
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 070 060 030 - 11631928
9 Power_On_Hours -O--CK 096 096 000 - 3633
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 480
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0 0 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 066 061 045 - 34 (Min/Max 33/34)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 24
193 Load_Cycle_Count -O--CK 100 100 000 - 492
194 Temperature_Celsius -O---K 034 040 000 - 34 (0 14 0 0 0)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 3663h+30m+55.281s
241 Total_LBAs_Written ------ 100 253 000 - 1223455614
242 Total_LBAs_Read ------ 100 253 000 - 5344875356
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
### USB disks: sdb
# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
=============================== StdErr Messages ===============================
E: Couldn't create temporary file to work with /var/lib/apt/lists/fr.archive.ubuntu.com_ubuntu_dists_xenial_InRelease - mkstemp (30: Read-only file system)
E: The package lists or status file could not be parsed or opened.
W: Not using locking for read only lock file /var/lib/dpkg/lock
E: Unable to write to /var/cache/apt/
E: The package lists or status file could not be parsed or opened.Posting 933336 from bn-de2b4 posted at 2017-05-20 11:12:20 expires: 2017-06-19 11:12:20
May 20, 2017, bisnext report id de2b4
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.4.0-78-generic i686 (32 bit gcc: 4.8.4)
Desktop: N/A dm: lightdm Distro: Ubuntu 14.04.5 LTS
Machine: Device: desktop Mobo: Gigabyte model: B85M-D3H v: x.x
BIOS: American Megatrends v: F14 date: 09/19/2014
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Dual core Intel Core i3-4170 (-HT-MCP-) cache: 3072 KB
flags: (lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 14765
clock speeds: min/max: 800/3700 MHz 1: 3700 MHz 2: 3700 MHz
3: 3700 MHz 4: 3700 MHz
Memory: Array-1 capacity: 32 GB devices: 4 EC: None
Device-1: ChannelA-DIMM0 size: No Module Installed type: N/A
Device-2: ChannelA-DIMM1 size: 4 GB speed: 1333 MHz type: DDR3
manufacturer: Kingston part: 99U5474-028.A00LF
Device-3: ChannelB-DIMM0 size: No Module Installed type: N/A
Device-4: ChannelB-DIMM1 size: 4 GB speed: 1333 MHz type: DDR3
manufacturer: Kingston part: 99U5474-028.A00LF
Graphics: Card: Intel 4th Generation Core Processor Family Integrated Graphics Controller
bus-ID: 00:02.0 chip-ID: 8086:041e
Display Server: X.Org 1.18.3 drivers: intel (unloaded: modesetting,fbdev,vesa)
tty size: 1920x1080@60.0hz
GLX Renderer: Mesa DRI Intel Haswell x86/MMX/SSE2
GLX Version: 3.0 Mesa 11.2.0 Direct Rendering: Yes
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:8c20
Card-2 Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0 chip-ID: 8086:0c0c
Sound: Advanced Linux Sound Architecture v: k4.4.0-78-generic
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: e000
bus-ID: 02:00.0 chip-ID: 10ec:8168
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1000.2GB (4.6% used)
ID-1: /dev/sda model: ST1000DM003 size: 1000.2GB
Optical: /dev/sr0 model: HL-DT-ST DVDRAM GH24NSD1
rev: LG00 dev-links: cdrom
Features: speed: 12x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 430G used: 36G (9%) fs: ext4 dev: /dev/sda6
label: N/A uuid: b54110fd-1826-4b2c-95ec-98f58340dfb1
ID-2: swap-1 size: 8.47GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
label: N/A uuid: a97ffc46-240e-45ed-a468-1e22034412f2
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sda1 size: 523.03G
fs: ext4 label: N/A uuid: 41e3108e-3e9a-4cef-ad1d-f3f50cef5d50
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb [url]http://fr.archive.ubuntu.com/ubuntu/[/url] trusty main restricted
deb-src [url]http://fr.archive.ubuntu.com/ubuntu/[/url] trusty main restricted
deb [url]http://fr.archive.ubuntu.com/ubuntu/[/url] trusty-updates main restricted
deb-src [url]http://fr.archive.ubuntu.com/ubuntu/[/url] trusty-updates main restricted
deb [url]http://fr.archive.ubuntu.com/ubuntu/[/url] trusty universe
deb-src [url]http://fr.archive.ubuntu.com/ubuntu/[/url] trusty universe
deb [url]http://fr.archive.ubuntu.com/ubuntu/[/url] trusty-updates universe
deb-src [url]http://fr.archive.ubuntu.com/ubuntu/[/url] trusty-updates universe
deb [url]http://fr.archive.ubuntu.com/ubuntu/[/url] trusty multiverse
deb-src [url]http://fr.archive.ubuntu.com/ubuntu/[/url] trusty multiverse
deb [url]http://fr.archive.ubuntu.com/ubuntu/[/url] trusty-updates multiverse
deb-src [url]http://fr.archive.ubuntu.com/ubuntu/[/url] trusty-updates multiverse
deb [url]http://fr.archive.ubuntu.com/ubuntu/[/url] trusty-backports main restricted universe multiverse
deb-src [url]http://fr.archive.ubuntu.com/ubuntu/[/url] trusty-backports main restricted universe multiverse
deb [url]http://security.ubuntu.com/ubuntu[/url] trusty-security main restricted
deb-src [url]http://security.ubuntu.com/ubuntu[/url] trusty-security main restricted
deb [url]http://security.ubuntu.com/ubuntu[/url] trusty-security universe
deb-src [url]http://security.ubuntu.com/ubuntu[/url] trusty-security universe
deb [url]http://security.ubuntu.com/ubuntu[/url] trusty-security multiverse
deb-src [url]http://security.ubuntu.com/ubuntu[/url] trusty-security multiverse
deb [url]http://extras.ubuntu.com/ubuntu[/url] trusty main
deb-src [url]http://extras.ubuntu.com/ubuntu[/url] trusty main
deb [url]http://archive.canonical.com/[/url] trusty partner
Active apt sources in file: /etc/apt/sources.list.d/google-earth.list
deb [url]http://dl.google.com/linux/earth/deb/[/url] stable main
Active apt sources in file: /etc/apt/sources.list.d/yannubuntu-boot-repair-trusty.list
deb [url]http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu[/url] trusty main
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 15.5% command: firefox pid: 2827 mem: 332.09MB (4.1%)
2: cpu: 1.0% command: update-manager (started by: python3) pid: 24589 mem: 104.79MB (1.3%)
3: cpu: 0.6% command: compiz pid: 1954 mem: 105.21MB (1.3%)
4: cpu: 0.6% command: Xorg pid: 1104 mem: 76.70MB (0.9%)
5: cpu: 0.4% command: bash pid: 25406 mem: 4.00MB (0.0%)
6: cpu: 0.2% command: oneconf-service (started by: python3) pid: 24595 mem: 25.14MB (0.3%)
7: cpu: 0.1% command: aptd (started by: python3) pid: 24673 mem: 22.10MB (0.2%)
8: cpu: 0.1% command: gnome-terminal pid: 3040 mem: 31.81MB (0.3%)
9: cpu: 0.0% command: sed pid: 25459 mem: 1.34MB (0.0%)
10: cpu: 0.0% command: bash pid: 25457 mem: 2.79MB (0.0%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 332.09MB (4.1%) command: firefox pid: 2827 cpu: 15.5%
2: mem: 105.21MB (1.3%) command: compiz pid: 1954 cpu: 0.6%
3: mem: 104.79MB (1.3%) command: update-manager (started by: python3) pid: 24589 cpu: 1.0%
4: mem: 76.70MB (0.9%) command: Xorg pid: 1104 cpu: 0.6%
5: mem: 42.95MB (0.5%) command: evolution-calendar-factory pid: 1959 cpu: 0.0%
6: mem: 42.74MB (0.5%) command: nautilus pid: 1969 cpu: 0.0%
7: mem: 36.52MB (0.4%) command: evolution-alarm-notify pid: 2200 cpu: 0.0%
8: mem: 31.81MB (0.3%) command: gnome-terminal pid: 3040 cpu: 0.1%
9: mem: 29.45MB (0.3%) command: hud-service pid: 1796 cpu: 0.0%
10: mem: 26.45MB (0.3%) command: gnome-session pid: 1800 cpu: 0.0%
Info: Processes: 217 Uptime: 2:02 Memory: 760.6/7982.2MB
Init: Upstart v: 1.12.1 runlevel: 2 default: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.111 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
/dev/sda1:Ubuntu 16.04 LTS (16.04):Ubuntu:linux
========================= Boot Information Details ============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos6)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 têtes, 63 secteurs/piste, 121601 cylindres, total 1953525168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,021,538,696 1,021,536,649 83 Linux
/dev/sda2 1,021,540,350 1,953,523,711 931,983,362 5 Extended
/dev/sda5 1,936,988,160 1,953,523,711 16,535,552 82 Linux swap / Solaris
/dev/sda6 1,021,540,352 1,936,988,159 915,447,808 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 41e3108e-3e9a-4cef-ad1d-f3f50cef5d50 ext4
/dev/sda5 a97ffc46-240e-45ed-a468-1e22034412f2 swap
/dev/sda6 b54110fd-1826-4b2c-95ec-98f58340dfb1 ext4
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 mai 20 11:09 ata-HL-DT-ST_DVDRAM_GH24NSD1_K1AF7EA0041 -> ../../sr0
lrwxrwxrwx 1 root root 9 mai 20 11:10 ata-ST1000DM003-1ER162_Z4Y9YBLR -> ../../sda
lrwxrwxrwx 1 root root 10 mai 20 11:10 ata-ST1000DM003-1ER162_Z4Y9YBLR-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai 20 11:10 ata-ST1000DM003-1ER162_Z4Y9YBLR-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 20 11:10 ata-ST1000DM003-1ER162_Z4Y9YBLR-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 mai 20 11:10 ata-ST1000DM003-1ER162_Z4Y9YBLR-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 mai 20 11:10 wwn-0x5000c500870fc93c -> ../../sda
lrwxrwxrwx 1 root root 10 mai 20 11:10 wwn-0x5000c500870fc93c-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai 20 11:10 wwn-0x5000c500870fc93c-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 20 11:10 wwn-0x5000c500870fc93c-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 mai 20 11:10 wwn-0x5000c500870fc93c-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 mai 20 11:09 wwn-0x5001480000000000 -> ../../sr0
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda6 / ext4 (rw,errors=remount-ro)
__________________________=== Boot Files Content ===___________________________
___________________________ sda1/boot/grub/grub.cfg: ___________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-41e3108e-3e9a-4cef-ad1d-f3f50cef5d50' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 41e3108e-3e9a-4cef-ad1d-f3f50cef5d50
else
search --no-floppy --fs-uuid --set=root 41e3108e-3e9a-4cef-ad1d-f3f50cef5d50
fi
linux /boot/vmlinuz-4.4.0-59-generic root=UUID=41e3108e-3e9a-4cef-ad1d-f3f50cef5d50 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-59-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda1/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=41e3108e-3e9a-4cef-ad1d-f3f50cef5d50 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=a97ffc46-240e-45ed-a468-1e22034412f2 none swap sw 0 0
____________________________ sda1/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
___________________________ sda6/boot/grub/grub.cfg: ___________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b54110fd-1826-4b2c-95ec-98f58340dfb1' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 b54110fd-1826-4b2c-95ec-98f58340dfb1
else
search --no-floppy --fs-uuid --set=root b54110fd-1826-4b2c-95ec-98f58340dfb1
fi
linux /boot/vmlinuz-4.4.0-78-generic root=UUID=b54110fd-1826-4b2c-95ec-98f58340dfb1 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-78-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 b54110fd-1826-4b2c-95ec-98f58340dfb1
else
search --no-floppy --fs-uuid --set=root b54110fd-1826-4b2c-95ec-98f58340dfb1
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 b54110fd-1826-4b2c-95ec-98f58340dfb1
else
search --no-floppy --fs-uuid --set=root b54110fd-1826-4b2c-95ec-98f58340dfb1
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 16.04 LTS (16.04) (sur /dev/sda1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-41e3108e-3e9a-4cef-ad1d-f3f50cef5d50' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 41e3108e-3e9a-4cef-ad1d-f3f50cef5d50
else
search --no-floppy --fs-uuid --set=root 41e3108e-3e9a-4cef-ad1d-f3f50cef5d50
fi
linux /boot/vmlinuz-4.4.0-59-generic root=UUID=41e3108e-3e9a-4cef-ad1d-f3f50cef5d50 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-59-generic
}
_______________________________ sda6/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=b54110fd-1826-4b2c-95ec-98f58340dfb1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=a97ffc46-240e-45ed-a468-1e22034412f2 none swap sw 0 0
____________________________ sda6/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.4.0-78-generic root=UUID=b54110fd-1826-4b2c-95ec-98f58340dfb1 ro quiet splash vt.handoff=7
_________________________ RAM usage & Free disk space _________________________
total used free shared buffers cached
Mem: 7.8G 2.1G 5.7G 343M 212M 1.1G
-/+ buffers/cache: 753M 7.1G
Swap: 7.9G 0B 7.9G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sda6 / ext4 430G 36G 373G 9% 2%
Swap partition for hibernation : UUID=a97ffc46-240e-45ed-a468-1e22034412f2
_________________________________ USB devices __________________________________
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 046d:c062 Logitech, Inc. M-UAS144 [LS1 Laser Mouse]
Bus 003 Device 002: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 003 Device 004: ID 04f9:02e8 Brother Industries, Ltd MFC-J470DW
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
|__ Port 3: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 3: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 9: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 10: Dev 4, If 0, Class=Printer, Driver=usblp, 480M
|__ Port 10: Dev 4, If 1, Class=Vendor Specific Class, Driver=, 480M
|__ Port 10: Dev 4, If 2, Class=Vendor Specific Class, Driver=, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
___________________________________ Modules Loaded ____________________________
Module Size Used by
8250_fintek 16384 0
ablk_helper 16384 1 aesni_intel
aes_i586 20480 1 aesni_intel
aesni_intel 20480 0
ahci 36864 2
binfmt_misc 20480 1
bluetooth 466944 10 bnep,rfcomm
bnep 20480 2
btrfs 970752 0
coretemp 16384 0
crc32_pclmul 16384 0
cryptd 20480 1 ablk_helper
drm 303104 5 i915,drm_kms_helper
drm_kms_helper 135168 1 i915
fb_sys_fops 16384 1 drm_kms_helper
fjes 28672 0
gf128mul 16384 2 lrw,xts
hfs 53248 0
hfsplus 94208 0
hid 98304 2 hid_generic,usbhid
hid_generic 16384 0
i2c_algo_bit 16384 1 i915
i915 1114112 4
input_leds 16384 0
intel_powerclamp 16384 0
intel_rapl 20480 0
irqbypass 16384 1 kvm
jfs 172032 0
kvm 471040 1 kvm_intel
kvm_intel 159744 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 16384 0
lpc_ich 20480 0
lrw 16384 1 aesni_intel
mac_hid 16384 0
mei 94208 1 mei_me
mei_me 28672 0
mii 16384 1 r8169
minix 32768 0
msdos 20480 0
ntfs 98304 0
parport 45056 3 lp,ppdev,parport_pc
parport_pc 32768 1
ppdev 20480 0
psmouse 114688 0
qnx4 16384 0
r8169 77824 0
raid6_pq 102400 1 btrfs
rfcomm 65536 0
serio_raw 16384 0
shpchp 32768 0
snd 69632 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
snd_hda_codec 114688 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_codec_generic 69632 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 49152 1
snd_hda_codec_realtek 73728 1
snd_hda_core 61440 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hda_intel 32768 5
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 94208 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_rawmidi 28672 1 snd_seq_midi
snd_seq 57344 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 28672 2 snd_pcm,snd_seq
soundcore 16384 1 snd
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
tpm_infineon 20480 0
ufs 73728 0
usbhid 49152 0
usblp 20480 0
video 40960 1 i915
x86_pkg_temp_thermal 16384 0
xfs 860160 0
xor 28672 1 btrfs
xts 16384 1 aesni_intel
______________________________ Additional Drivers _____________________________
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
/etc/default/locale:
LANG="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr,fr,us
variant: latin9,oss,
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""
_____________________________ Upgradable Packages _____________________________
gir1.2-gtk-3.0 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libgail-3-0 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libgtk-3-0 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libgtk-3-bin 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libgtk-3-common 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libmm-glib0 1.0.0-2ubuntu1.1 from:1.0.0-2ubuntu1
libnautilus-extension1a 1:3.10.1-0ubuntu9.11 from:1:3.10.1-0ubuntu9.6
modemmanager 1.0.0-2ubuntu1.1 from:1.0.0-2ubuntu1
nautilus 1:3.10.1-0ubuntu9.11 from:1:3.10.1-0ubuntu9.6
nautilus-data 1:3.10.1-0ubuntu9.11 from:1:3.10.1-0ubuntu9.6
oneconf 0.3.7.14.04.1 from:0.3.7
oneconf-common 0.3.7.14.04.1 from:0.3.7
python-oneconf 0.3.7.14.04.1 from:0.3.7
python3-oneconf 0.3.7.14.04.1 from:0.3.7
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
account-plugin-windows-live kde-l10n-engb kde-l10n-fr libllvm3.5 libntdb1
libupstart1 python-ntdb
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 14 not upgraded.
__________________ Configuration files of uninstalled packages: ________________
Package Version
libegl1-mesa-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libgbm1-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libgl1-mesa-dri-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libgl1-mesa-glx-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libglapi-mesa-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libgles1-mesa-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libgles2-mesa-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libopenvg1-mesa-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libwayland-egl1-mesa-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
libxatracker2-lts-utopic:i386 10.3.2-0ubuntu1~trusty2
linux-image-3.16.0-30-generic 3.16.0-30.40~14.04.1
linux-image-3.16.0-77-generic 3.16.0-77.99~14.04.1
linux-image-4.4.0-59-generic 4.4.0-59.80~14.04.1
linux-image-4.4.0-62-generic 4.4.0-62.83~14.04.1
linux-image-4.4.0-63-generic 4.4.0-63.84~14.04.2
linux-image-4.4.0-64-generic 4.4.0-64.85~14.04.1
linux-image-4.4.0-66-generic 4.4.0-66.87~14.04.1
linux-image-4.4.0-67-generic 4.4.0-67.88~14.04.1
linux-image-4.4.0-70-generic 4.4.0-70.91~14.04.1
linux-image-4.4.0-71-generic 4.4.0-71.92~14.04.1
linux-image-4.4.0-72-generic 4.4.0-72.93~14.04.1
linux-image-extra-3.16.0-30-generic 3.16.0-30.40~14.04.1
linux-image-extra-3.16.0-77-generic 3.16.0-77.99~14.04.1
linux-image-extra-4.4.0-59-generic 4.4.0-59.80~14.04.1
linux-image-extra-4.4.0-62-generic 4.4.0-62.83~14.04.1
linux-image-extra-4.4.0-63-generic 4.4.0-63.84~14.04.2
linux-image-extra-4.4.0-64-generic 4.4.0-64.85~14.04.1
linux-image-extra-4.4.0-66-generic 4.4.0-66.87~14.04.1
linux-image-extra-4.4.0-67-generic 4.4.0-67.88~14.04.1
linux-image-extra-4.4.0-70-generic 4.4.0-70.91~14.04.1
linux-image-extra-4.4.0-71-generic 4.4.0-71.92~14.04.1
linux-image-extra-4.4.0-72-generic 4.4.0-72.93~14.04.1
xserver-xorg-core-lts-utopic 2:1.16.0-1ubuntu1.2~trusty2
xserver-xorg-lts-utopic 1:7.7+7ubuntu2~trusty1
xserver-xorg-video-intel-lts-utopic 2:2.99.914-1~exp1ubuntu4.5~trusty1
xserver-xorg-video-modesetting-lts-utopic 0.9.0-1build1~trusty1
xserver-xorg-video-openchrome-lts-utopic 1:0.3.3-1build2~trusty1
xserver-xorg-video-vmware-lts-utopic 1:13.0.2-3ubuntu1~trusty1
Use the following command to clean old configuration files:
sudo apt purge libegl1-mesa-lts-utopic:i386 libgbm1-lts-utopic:i386 libgl1-mesa-dri-lts-utopic:i386 libgl1-mesa-glx-lts-utopic:i386 libglapi-mesa-lts-utopic:i386 libgles1-mesa-lts-utopic:i386 libgles2-mesa-lts-utopic:i386 libopenvg1-mesa-lts-utopic:i386 libwayland-egl1-mesa-lts-utopic:i386 libxatracker2-lts-utopic:i386 linux-image-3.16.0-30-generic linux-image-3.16.0-77-generic linux-image-4.4.0-59-generic linux-image-4.4.0-62-generic linux-image-4.4.0-63-generic linux-image-4.4.0-64-generic linux-image-4.4.0-66-generic linux-image-4.4.0-67-generic linux-image-4.4.0-70-generic linux-image-4.4.0-71-generic linux-image-4.4.0-72-generic linux-image-extra-3.16.0-30-generic linux-image-extra-3.16.0-77-generic linux-image-extra-4.4.0-59-generic linux-image-extra-4.4.0-62-generic linux-image-extra-4.4.0-63-generic linux-image-extra-4.4.0-64-generic linux-image-extra-4.4.0-66-generic linux-image-extra-4.4.0-67-generic linux-image-extra-4.4.0-70-generic linux-image-extra-4.4.0-71-generic linux-image-extra-4.4.0-72-generic xserver-xorg-core-lts-utopic xserver-xorg-lts-utopic xserver-xorg-video-intel-lts-utopic xserver-xorg-video-modesetting-lts-utopic xserver-xorg-video-openchrome-lts-utopic xserver-xorg-video-vmware-lts-utopic
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic-lts-xenial 4.4.0.78.63
linux-headers-4.4.0-75 4.4.0-75.96~14.04.1
linux-headers-4.4.0-75-generic 4.4.0-75.96~14.04.1
linux-headers-4.4.0-78 4.4.0-78.99~14.04.2
linux-headers-4.4.0-78-generic 4.4.0-78.99~14.04.2
linux-headers-generic-lts-xenial 4.4.0.78.63
linux-image-4.4.0-75-generic 4.4.0-75.96~14.04.1
linux-image-4.4.0-78-generic 4.4.0-78.99~14.04.2
linux-image-extra-4.4.0-75-generic 4.4.0-75.96~14.04.1
linux-image-extra-4.4.0-78-generic 4.4.0-78.99~14.04.2
linux-image-generic-lts-xenial 4.4.0.78.63
File list in /boot directory:
abi-4.4.0-75-generic
abi-4.4.0-78-generic
config-4.4.0-75-generic
config-4.4.0-78-generic
grub
initrd.img-4.4.0-75-generic
initrd.img-4.4.0-78-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.4.0-75-generic
System.map-4.4.0-78-generic
vmlinuz-4.4.0-75-generic
vmlinuz-4.4.0-78-generic
_________________________________ System Logs ________________________________
Selection of relevent log entries:
[ 0.116147] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.118110] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.135952] SCSI subsystem initialized
[ 0.453805] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.810102] scsi host0: ahci
[ 0.810216] scsi host1: ahci
[ 0.810291] scsi host2: ahci
[ 0.810365] scsi host3: ahci
[ 0.810438] scsi host4: ahci
[ 0.810506] scsi host5: ahci
[ 1.127870] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.127890] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.128670] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.128673] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.128674] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.129445] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.129448] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.129450] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.130304] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.130307] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.130308] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.132152] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.132154] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.132156] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.136860] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSD1 LG00 PQ: 0 ANSI: 5
[ 1.154668] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.154780] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.154846] sr 4:0:0:0: Attached scsi generic sg0 type 5
[ 1.155012] scsi 5:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[ 1.155202] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 1.155210] sd 5:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.190976] sd 5:0:0:0: [sda] Attached SCSI disk
[ 2.445458] init: plymouth-upstart-bridge main process (192) terminated with status 1
[ 2.446958] init: plymouth-upstart-bridge main process (204) terminated with status 1
[ 2.448184] init: plymouth-upstart-bridge main process (206) terminated with status 1
[ 2.449495] init: plymouth-upstart-bridge main process (208) terminated with status 1
[ 2.450601] init: plymouth-upstart-bridge main process (210) terminated with status 1
[ 2.452028] init: plymouth-upstart-bridge main process (211) terminated with status 1
[ 5.466941] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 5.551272] WARNING! power/level is deprecated; use power/control instead
[ 8.278893] audit: type=1400 audit(1495271396.228:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=521 comm="apparmor_parser"
[ 8.278898] audit: type=1400 audit(1495271396.228:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=521 comm="apparmor_parser"
[ 8.278901] audit: type=1400 audit(1495271396.228:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=521 comm="apparmor_parser"
[ 8.278910] audit: type=1400 audit(1495271396.228:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=522 comm="apparmor_parser"
[ 8.278916] audit: type=1400 audit(1495271396.228:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=522 comm="apparmor_parser"
[ 8.278920] audit: type=1400 audit(1495271396.228:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=522 comm="apparmor_parser"
[ 10.597812] init: avahi-cups-reload main process (755) terminated with status 1
[ 11.831298] audit: type=1400 audit(1495271399.780:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=734 comm="apparmor_parser"
[ 11.831305] audit: type=1400 audit(1495271399.780:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=734 comm="apparmor_parser"
[ 12.371012] audit: type=1400 audit(1495271400.320:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=833 comm="apparmor_parser"
[ 12.371020] audit: type=1400 audit(1495271400.320:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=833 comm="apparmor_parser"
[ 13.306027] audit: type=1400 audit(1495271401.256:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=834 comm="apparmor_parser"
[ 13.306032] audit: type=1400 audit(1495271401.256:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=834 comm="apparmor_parser"
[ 13.306035] audit: type=1400 audit(1495271401.256:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=834 comm="apparmor_parser"
[ 13.306037] audit: type=1400 audit(1495271401.256:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=834 comm="apparmor_parser"
[ 13.306040] audit: type=1400 audit(1495271401.256:28): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=834 comm="apparmor_parser"
[ 13.306042] audit: type=1400 audit(1495271401.256:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=834 comm="apparmor_parser"
[ 13.428896] audit: type=1400 audit(1495271401.380:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=875 comm="apparmor_parser"
[ 17.320839] init: plymouth-upstart-bridge main process (1191) terminated with status 1
[ 440.515546] audit: type=1400 audit(1495271826.823:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2607 comm="apparmor_parser"
[ 440.515559] audit: type=1400 audit(1495271826.823:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2607 comm="apparmor_parser"
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=10 [slave pointer (2)]
⎜ ↳ Logitech USB Laser Mouse id=11 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Logitech USB Receiver id=9 [slave keyboard (3)]
xrandr:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
HDMI1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
VGA1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
1920x1080 60.0*+
1680x1050 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x720 60.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 72.8 66.7 60.0
720x400 70.1
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.762] (==) No Layout section. Using the first Screen section.
[ 15.762] (==) No screen section available. Using defaults.
[ 15.762] (**) |-->Screen "Default Screen Section" (0)
[ 15.762] (**) | |-->Monitor "<default monitor>"
[ 15.762] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 15.783] (--) PCI:*(0:0:2:0) 8086:041e:1458:d000 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 15.783] (II) LoadModule: "glx"
[ 15.925] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.320] (II) LoadModule: "intel"
[ 16.320] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 16.362] (II) LoadModule: "modesetting"
[ 16.362] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 16.385] (II) LoadModule: "fbdev"
[ 16.385] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 16.393] (II) LoadModule: "vesa"
[ 16.393] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 16.482] (WW) Falling back to old probe method for modesetting
[ 16.482] (WW) Falling back to old probe method for fbdev
[ 16.482] (II) Loading sub module "fbdevhw"
[ 16.482] (II) LoadModule: "fbdevhw"
[ 16.482] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 16.517] (WW) Falling back to old probe method for vesa
[ 16.517] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 16.518] (II) intel(0): Output VGA1 has no monitor section
[ 16.518] (II) intel(0): Output HDMI1 has no monitor section
[ 16.518] (II) intel(0): Output HDMI2 has no monitor section
[ 16.518] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 16.518] (II) Loading sub module "dri2"
[ 16.518] (II) LoadModule: "dri2"
[ 16.518] (II) Loading sub module "present"
[ 16.518] (II) LoadModule: "present"
[ 16.518] (II) UnloadModule: "modesetting"
[ 16.518] (II) UnloadModule: "fbdev"
[ 16.518] (II) UnloadModule: "vesa"
[ 17.020] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 17.031] (II) intel(0): Setting screen physical size to 507 x 285
[ 17.175] (II) LoadModule: "evdev"
[ 17.175] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.4.0-78-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.4.0-78-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:41e
BusID "PCI:0@0:2:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
card0-VGA-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? No
main_arch_path i386-linux-gnu, other_arch_path x86_64-linux-gnu
Current alternative: /usr/lib/i386-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/i386-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
Single card detected
Nothing to do
No change - nothing to do
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.2 2013-07-26 r3841 [i686-linux-4.4.0-78-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-1ER162
LU WWN Device Id: 5 000c50 0870fc93c
Firmware Version: CC45
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat May 20 13:12:19 2017 CEST
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
[url]http://knowledge.seagate.com/articles/en_US/FAQ/207931en[/url]
[url]http://knowledge.seagate.com/articles/en_US/FAQ/223651en[/url]
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 102 099 006 - 5170104
3 Spin_Up_Time PO---- 097 097 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 478
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 070 060 030 - 11604548
9 Power_On_Hours -O--CK 096 096 000 - 3622
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 478
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0 0 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 067 061 045 - 33 (Min/Max 17/33)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 24
193 Load_Cycle_Count -O--CK 100 100 000 - 489
194 Temperature_Celsius -O---K 033 040 000 - 33 (0 14 0 0 0)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 3652h+06m+20.905s
241 Total_LBAs_Written ------ 100 253 000 - 1221575796
242 Total_LBAs_Read ------ 100 253 000 - 5342964107
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors LoggedDernière modification par xubu1957 (Le 10/06/2017, à 09:24)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne