Contenu | Rechercher | Menus

Annonce

Ubuntu 16.04 LTS
Commandez vos DVD et clés USB Ubuntu-fr !

Pour en savoir un peu plus sur l'équipe du forum.

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

#26 Le 02/06/2017, à 16:05

DANIELF01

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

Salut Ylag,
j'ai fait un sudo nano /etc/default/grub et j'ai enregistré le fichier avec l'option nomedeset
suivi d' un sudo update-grub
puis sudo reboot
et cela a fonctionné mais j'ai une mauvaise résolution d'écran (caractères/icônes trop gros)
je redonne le retour de la commande sudo nano /etc/default/grub

  GNU nano 2.5.3    Fichier : /etc/default/grub               


# The resolution used on graphical terminal
# note that you can use only modes which your graphic card su$
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" pa$
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entri$
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"






^G Aide     ^O Écrire   ^W Chercher ^K Couper   ^J Justifier
^X Quitter  ^R Lire fich^\ Remplacer^U Coller   ^T Orthograp.

Hors ligne

#27 Le 02/06/2017, à 16:36

ylag

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

Salut,

Le retour dans votre commentaire précédent ne semble pas complet, il manque des lignes.
Pour lister le fichier, faites plutôt :

cat /etc/default/grub

Avez-vous tenté un démarrage normal sans l'option nomodeset (il faut effacer nomodeset de la ligne de commande pour ce faire.) ?

Deux façon de modifier la ligne de commande au démarrage :

Dans le menu GRUB au démarrage, faire "e" pour entrer dans le mode édition. Repérez et effacez l'option nomodeset de la ligne de commande, puis faites "Ctrl+X" pour continuer le démarrage. Ceci désactive de façon temporaire l'option jusqu'au démarrage suivant.

Vous pouvez aussi directement éditer le fichier /etc/default/grub dans une session active et y effacer l'option nomodeset. Enregistrez et fermez ensuite le fichier, puis faites :

sudo update-grub

...avant de redémarrer.
Cette manip désactive de façon définitive l'option.

A+

Dernière modification par ylag (Le 02/06/2017, à 17:27)

Hors ligne

#28 Le 02/06/2017, à 22:54

LeoMajor

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

bonsoir,

copier-coller le rapport  bisnext.
et aussi, dans une console, terminal,  le retour de

dmesg -T | grep -i "tpm\|cpuidle"

Hors ligne

#29 Le 03/06/2017, à 14:41

DANIELF01

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

Bonjour,
je redonne le retour de la commande(en mode nomodeset):

danarrow@danarrow-System-Product-Name:~$ cat /etc/default/grub# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
danarrow@danarrow-System-Product-Name:~$ 

Hors ligne

#30 Le 03/06/2017, à 14:47

DANIELF01

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

Salut,
je n'arrive plus à exécuter cette cde: sudo nano /etc/default/grub
voici le retour:

Le fichier _ est ouvert (par root avec nano 2.5.3, PID 2117)  
 O Oui
 N Non          ^C Annuler

Hors ligne

#31 Le 03/06/2017, à 15:04

DANIELF01

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

Voici le rapport bisnext:

danarrow@danarrow-System-Product-Name:~$ sudo bash bisnext --pastebin

bisnext 0.03

...hardware and system summary
...boot info
Identifying MBRs...
Computing Partition Table of /dev/sda...
Searching sda1 for information... 
Searching sda2 for information... 
Searching sda5 for information... 
Collecting hardware and system information...
...system
...packages
...
...
...disks health

Finished, bisnext report id 7369c available in file bisnext.txt
located in directory /home/danarrow

bisnext report also available at https://paste.debian.net/963486/
danarrow@danarrow-System-Product-Name:~$ 

Opening report in text editor...

Jun  3 2017, bisnext report id 7369c also available at https://paste.debian.net/963486/

                                 bisnext 0.03


============================ Hardware and System Summary ======================

System:    Kernel: 4.8.0-53-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine:   Device: desktop Mobo: ASUSTeK model: P5V-VM DH v: 1.XX
           BIOS: Phoenix v: ASUS P5V-VM DH 0501 date: 08/04/2006
Battery    No battery data found in /sys or dmidecode. Is one present?
CPU:       Dual core Intel Core2 6300 (-MCP-) cache: 2048 KB
           flags: (lm nx sse sse2 sse3 ssse3 vmx) bmips: 7447
           clock speeds: min/max: 1600/1867 MHz 1: 1600 MHz 2: 1600 MHz
Memory:    Array-1 capacity: 4 GB (est) devices: 2 EC: None
           max module size: 2 GB (est)
           Device-1: N/A size: N/A speed: N/A type: N/A
           manufacturer: N/A part: N/A
           Device-2: A0 size: 1 GB (Single-bank) speed: 533 MHz type: DDR2
           manufacturer: N/A part: N/A
           Device-3: A1 size: 2 GB speed: 533 MHz type: DDR2
           manufacturer: N/A part: N/A
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Turks XT [Radeon HD 6670/7670]
           bus-ID: 02:00.0 chip-ID: 1002:6758
           Display Server: X.Org 1.18.4 drivers: fbdev,ati (unloaded: modesetting,vesa,radeon)
           tty size: 640x480@73.00hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 4.0, 128 bits)
           GLX Version: 3.0 Mesa 17.1.0 Direct Rendering: Yes
Audio:     Card-1 VIA VT8237A/VT8251 HDA Controller
           driver: snd_hda_intel bus-ID: 04:01.0 chip-ID: 1106:3288
           Card-2 Advanced Micro Devices [AMD/ATI] Turks/Whistler HDMI Audio [Radeon HD 6000 Series]
           driver: snd_hda_intel bus-ID: 02:00.1 chip-ID: 1002:aa90
           Sound: Advanced Linux Sound Architecture v: k4.8.0-53-generic
Network:   Card-1: VIA VT6102/VT6103 [Rhine-II]
           driver: via-rhine port: d000 bus-ID: 00:12.0 chip-ID: 1106:3065
           IF: enp0s18 state: down mac: <filter>
           Card-2: Realtek RTL8187 Wireless Adapter
           driver: rtl8187 usb-ID: 001-006 chip-ID: 0bda:8187
           IF: wlx0015af053c73 state: N/A mac: N/A
           Card-3:  Atheros AR9271 802.11n
           driver: ath9k_htc usb-ID: 001-009 chip-ID: 0cf3:9271
           IF: wlxb0487a88a93c state: N/A mac: N/A
Drives:    HDD Total Size: 320.1GB (3.5% used)
           ID-1: /dev/sda model: MAXTOR_STM332062 size: 320.1GB
          
           Optical: /dev/sr0 model: ATAPI DVD DW 8X16X8X16
           rev: L.02 dev-links: cdrom,cdrw,dvd,dvdrw
           Features: speed: 48x multisession: yes
           audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running
Partition: ID-1: / size: 291G used: 7.6G (3%) fs: ext4 dev: /dev/sda1
           label: N/A uuid: eff8c143-18ed-46fa-8b6f-680dc2d77c9f
           ID-2: swap-1 size: 3.22GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
           label: N/A uuid: 0de64e8d-9f36-4f69-86a3-b1a7faa88637
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors:   None detected - is lm-sensors installed and configured?
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
           deb http://archive.canonical.com/ubuntu xenial partner
           deb http://security.ubuntu.com/ubuntu xenial-security main restricted
           deb http://security.ubuntu.com/ubuntu xenial-security universe
           deb http://security.ubuntu.com/ubuntu xenial-security multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
           1: cpu: 13.1% command: compiz pid: 1179 mem: 139.97MB (4.6%)
           2: cpu: 8.7% command: firefox pid: 1658 mem: 255.21MB (8.4%)
           3: cpu: 6.9% command: Xorg pid: 904 mem: 56.20MB (1.8%)
           4: cpu: 0.4% command: gnome-software pid: 1322 mem: 87.71MB (2.9%)
           5: cpu: 0.3% command: bash pid: 4417 mem: 4.37MB (0.1%)
           6: cpu: 0.2% command: gnome-terminal-server pid: 2066 mem: 35.34MB (1.1%)
           7: cpu: 0.1% command: unity-panel-service pid: 1157 mem: 54.91MB (1.8%)
           8: cpu: 0.1% command: init pid: 1 mem: 5.68MB (0.1%)
           9: cpu: 0.0% command: sed pid: 4464 mem: 1.06MB (0.0%)
           10: cpu: 0.0% command: bash pid: 4462 mem: 3.14MB (0.1%)
           Memory: MB / % used - CPU: % used - top 10 active
           1: mem: 255.21MB (8.4%) command: firefox pid: 1658 cpu: 8.7%
           2: mem: 139.97MB (4.6%) command: compiz pid: 1179 cpu: 13.1%
           3: mem: 87.71MB (2.9%) command: gnome-software pid: 1322 cpu: 0.4%
           4: mem: 58.60MB (1.9%) command: evolution-calendar-factory pid: 1488 cpu: 0.0%
           5: mem: 56.20MB (1.8%) command: Xorg pid: 904 cpu: 6.9%
           6: mem: 54.91MB (1.8%) command: unity-panel-service pid: 1157 cpu: 0.1%
           7: mem: 54.53MB (1.8%) command: evolution-calendar-factory-subprocess pid: 1559 cpu: 0.0%
           8: mem: 54.27MB (1.8%) command: unity-settings-daemon pid: 1139 cpu: 0.0%
           9: mem: 51.11MB (1.6%) command: evolution-calendar-factory-subprocess pid: 1571 cpu: 0.0%
           10: mem: 50.30MB (1.6%) command: ibus-ui-gtk3 pid: 1114 cpu: 0.0%
Info:      Processes: 190 Uptime: 25 min Memory: 870.4/3006.5MB
           Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481 running in bash) inxi: 2.3.11


_______________________________ UEFI settings _________________________________

Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.


__________________________________ Secure Boot ________________________________

Secure Boot disabled or not available on this system.


__________________________________ OS prober ________________________________

None


_____________________________ md5sum of EFI files _____________________________

None


========================= Boot Information Details ============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location. It also 
    embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
    
    config script
    ---------------------------------------------------------------------------
    (,msdos1)/boot/grub
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.2 LTS
    Boot files:         /boot/grub/grub.cfg /etc/fstab /etc/default/grub  
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

_________________________=== Drive/Partition Info ===__________________________

Drive: sda _____________________________________________________________________
Disque /dev/sda : 298,1 GiB, 320072933376 octets, 625142448 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   618,854,399   618,852,352  83 Linux
/dev/sda2         618,856,446   625,141,759     6,285,314   5 Extended
/dev/sda5         618,856,448   625,141,759     6,285,312  82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        eff8c143-18ed-46fa-8b6f-680dc2d77c9f   ext4       
/dev/sda5        0de64e8d-9f36-4f69-86a3-b1a7faa88637   swap       

_________________________ "ls -l /dev/disk/by_id" output ______________________

total 0
lrwxrwxrwx 1 root root  9 juin   3 15:29 ata-ATAPI_DVD_DW_8X16X8X16 -> ../../sr0
lrwxrwxrwx 1 root root  9 juin   3 15:29 ata-MAXTOR_STM3320620A_5QF128WE -> ../../sda
lrwxrwxrwx 1 root root 10 juin   3 15:29 ata-MAXTOR_STM3320620A_5QF128WE-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juin   3 15:29 ata-MAXTOR_STM3320620A_5QF128WE-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 juin   3 15:29 ata-MAXTOR_STM3320620A_5QF128WE-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 juin   3 15:30 usb-Generic_USB_CF_Reader_058F312D81B-0:1 -> ../../sdc
lrwxrwxrwx 1 root root  9 juin   3 15:30 usb-Generic_USB_MS_Reader_058F312D81B-0:3 -> ../../sde
lrwxrwxrwx 1 root root  9 juin   3 15:30 usb-Generic_USB_SD_Reader_058F312D81B-0:0 -> ../../sdb
lrwxrwxrwx 1 root root  9 juin   3 15:30 usb-Generic_USB_SM_Reader_058F312D81B-0:2 -> ../../sdd


_________________________ "ls -R /dev/mapper/" output _________________________

None


________________________________ Mount points _________________________________

Device           Mount_Point              Type       Options
/dev/sda1        /                                   ext4 (rw,relatime,errors=remount-ro,data=ordered)



__________________________=== Boot Files Content ===___________________________


___________________________ sda1/boot/grub/grub.cfg: ___________________________

File size: 11472, Line count: 315, Menu entries (sub entries included) : 9

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/10_linux ###

--- Notice bisnext removed top of file content from the report for readability

menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-eff8c143-18ed-46fa-8b6f-680dc2d77c9f' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  eff8c143-18ed-46fa-8b6f-680dc2d77c9f
	else
	  search --no-floppy --fs-uuid --set=root eff8c143-18ed-46fa-8b6f-680dc2d77c9f
	fi
        linux	/boot/vmlinuz-4.8.0-53-generic root=UUID=eff8c143-18ed-46fa-8b6f-680dc2d77c9f ro  quiet splash nomodeset $vt_handoff
	initrd	/boot/initrd.img-4.8.0-53-generic
}

--- Notice bisnext removed the submenu section from the report for readability

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  eff8c143-18ed-46fa-8b6f-680dc2d77c9f
	else
	  search --no-floppy --fs-uuid --set=root eff8c143-18ed-46fa-8b6f-680dc2d77c9f
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  eff8c143-18ed-46fa-8b6f-680dc2d77c9f
	else
	  search --no-floppy --fs-uuid --set=root eff8c143-18ed-46fa-8b6f-680dc2d77c9f
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

_______________________________ sda1/etc/fstab: ________________________________

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=eff8c143-18ed-46fa-8b6f-680dc2d77c9f /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=0de64e8d-9f36-4f69-86a3-b1a7faa88637 none            swap    sw              0       0

____________________________ sda1/etc/default/grub: ____________________________

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

_________ Devices which don't seem to have a corresponding hard drive: _________

sdb sdc sdd sde 


===============================================================================
                          Running System Information                           
===============================================================================

______________________________ Kernel parameters ______________________________

BOOT_IMAGE=/boot/vmlinuz-4.8.0-53-generic root=UUID=eff8c143-18ed-46fa-8b6f-680dc2d77c9f ro quiet splash nomodeset vt.handoff=7


______________________________ Boot-up Statistics ______________________________

Startup finished in 5.614s (kernel) + 30.826s (userspace) = 36.440s


blame, first 10:
dev-sda1.device          14.385s
ModemManager.service     13.450s
accounts-daemon.service  9.679s
apparmor.service         9.553s
apport.service           6.712s
networking.service       6.677s
rsyslog.service          6.247s
systemd-logind.service   6.237s
ondemand.service         6.230s
lightdm.service          6.101s


critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

  1 graphical.target @30.527s
  2 multi-user.target @30.527s
  3 ModemManager.service @17.076s +13.450s
  4 basic.target @16.822s
  5 sockets.target @16.821s
  6 snapd.socket @16.819s +2ms
  7 sysinit.target @16.705s
  8 swap.target @16.705s
  9 dev-disk-by\x2duuid-0de64e8d\x2d9f36\x2d4f69\x2d86a3\x2db1a7faa88637.swap @16.505s +199ms
 10 dev-disk-by\x2duuid-0de64e8d\x2d9f36\x2d4f69\x2d86a3\x2db1a7faa88637.device @16.491s


_________________________ RAM usage & Free disk space _________________________

              total        used        free      shared  buff/cache   available
Mem:           2.9G        798M        1.4G        9.1M        766M        2.0G
Swap:          3.0G          0B        3.0G
Swappiness = 60

Filesystem     Mounted on Type  Size  Used Avail Use% IUse%
/dev/sda1      /          ext4  291G  7.6G  269G   3%    2%

Swap partition for hibernation : UUID=0de64e8d-9f36-4f69-86a3-b1a7faa88637


_________________________________ USB devices __________________________________

Bus 001 Device 007: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 006: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 001 Device 009: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
    |__ Port 2: Dev 9, If 0, Class=Vendor Specific Class, Driver=ath9k_htc, 480M
    |__ Port 3: Dev 6, If 0, Class=(Defined at Interface level), Driver=rtl8187, 480M
    |__ Port 5: Dev 7, If 0, Class=Mass Storage, Driver=usb-storage, 480M


_______________________________ Wireless Status _______________________________

0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no
1: phy1: Wireless LAN
	Soft blocked: no
	Hard blocked: no


___________________________________ Modules Loaded ____________________________

Module                  Size  Used by
ahci                   36864  0
arc4                   16384  4
asus_atk0110           20480  0
ath                    32768  3 ath9k_htc,ath9k_hw,ath9k_common
ath9k_common           36864  1 ath9k_htc
ath9k_htc              77824  0
ath9k_hw              475136  2 ath9k_htc,ath9k_common
autofs4                40960  2
btrfs                1060864  0
ccm                    20480  1
cfg80211              581632  5 ath9k_htc,mac80211,ath,rtl8187,ath9k_common
coretemp               16384  0
drm                   368640  2 ttm,drm_kms_helper
drm_kms_helper        167936  0
eeprom_93cx6           16384  1 rtl8187
fb_sys_fops            16384  1 drm_kms_helper
fjes                   28672  0
hfs                    57344  0
hfsplus               106496  0
hid                   122880  2 hid_generic,usbhid
hid_generic            16384  0
i2c_algo_bit           16384  0
i2c_viapro             16384  0
input_leds             16384  0
irqbypass              16384  1 kvm
jfs                   184320  0
kvm                   598016  1 kvm_intel
kvm_intel             192512  0
libahci                32768  1 ahci
libcrc32c              16384  1 xfs
lp                     20480  0
mac80211              761856  2 ath9k_htc,rtl8187
mac_hid                16384  0
mii                    16384  1 via_rhine
minix                  40960  0
msdos                  20480  0
ntfs                  102400  0
parport                49152  3 lp,parport_pc,ppdev
parport_pc             32768  1
pata_acpi              16384  0
pata_jmicron           16384  0
pata_via               16384  2
ppdev                  20480  0
qnx4                   16384  0
raid6_pq              102400  1 btrfs
rtl8187                40960  0
sata_via               20480  0
serio_raw              16384  0
shpchp                 36864  0
snd                    86016  21 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_hda_codec_analog,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_pcm
snd_hda_codec         135168  4 snd_hda_intel,snd_hda_codec_analog,snd_hda_codec_hdmi,snd_hda_codec_generic
snd_hda_codec_analog    16384  1
snd_hda_codec_generic    73728  1 snd_hda_codec_analog
snd_hda_codec_hdmi     45056  1
snd_hda_core           86016  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_analog,snd_hda_codec_hdmi,snd_hda_codec_generic
snd_hda_intel          36864  5
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               110592  4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_timer              32768  2 snd_seq,snd_pcm
soundcore              16384  1 snd
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
ttm                   102400  0
uas                    24576  0
ufs                    73728  0
usbhid                 53248  0
usb_storage            73728  1 uas
via_rhine              36864  0
xfs                  1048576  0
xor                    24576  1 btrfs


______________________________ Additional Drivers _____________________________

== cpu-microcode.py ==
driver   : intel-microcode - distro non-free


__________________________________ Locales ___________________________________

locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=

/etc/default/locale:
#  File generated by update-locale
LANG="fr_FR.UTF-8"

Active keyboard layout:
rules:      evdev
model:      pc105
layout:     fr,fr,us
variant:    latin9,oss,

Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""
BACKSPACE="guess"


_____________________________ Upgradable Packages _____________________________

None


________________________ Package Configuration Pending ________________________

None


__________________________ Package Installation Pending _______________________

Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.


__________________ Configuration files of uninstalled packages: ________________

Package                              Version
snap-confine                         2.25
xserver-xorg-core-hwe-16.04          2:1.18.4-1ubuntu6.1~16.04.1
xserver-xorg-hwe-16.04               1:7.7+13ubuntu4~16.04.2
xserver-xorg-video-intel-hwe-16.04   2:2.99.917+git20160706-1ubuntu1~16.04.1
xserver-xorg-video-vmware-hwe-16.04  1:13.1.0-2ubuntu3~16.04.1


Use the following command to clean old configuration files:

sudo apt purge snap-confine xserver-xorg-core-hwe-16.04 xserver-xorg-hwe-16.04 xserver-xorg-video-intel-hwe-16.04 xserver-xorg-video-vmware-hwe-16.04


_________________________ Kernel Packages Installed __________________________

Package                             Version
linux-generic-hwe-16.04             4.8.0.53.24
linux-headers-4.8.0-36              4.8.0-36.36~16.04.1
linux-headers-4.8.0-36-generic      4.8.0-36.36~16.04.1
linux-headers-4.8.0-53              4.8.0-53.56~16.04.1
linux-headers-4.8.0-53-generic      4.8.0-53.56~16.04.1
linux-headers-generic-hwe-16.04     4.8.0.53.24
linux-image-4.8.0-36-generic        4.8.0-36.36~16.04.1
linux-image-4.8.0-53-generic        4.8.0-53.56~16.04.1
linux-image-extra-4.8.0-36-generic  4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-53-generic  4.8.0-53.56~16.04.1
linux-image-generic-hwe-16.04       4.8.0.53.24


Files in /boot directory:
abi-4.8.0-36-generic
abi-4.8.0-53-generic
config-4.8.0-36-generic
config-4.8.0-53-generic
grub
initrd.img-4.8.0-36-generic
initrd.img-4.8.0-53-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.8.0-36-generic
System.map-4.8.0-53-generic
vmlinuz-4.8.0-36-generic
vmlinuz-4.8.0-53-generic



_________________________________ System Logs ________________________________

Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


Selection of relevent log entries:
[    0.153651] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.164530] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.183881] SCSI subsystem initialized
[    1.167363] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.412135] scsi host0: sata_via
[    1.413127] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[    1.413196] scsi host1: sata_via
[    1.413289] ata1: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 21
[    1.413291] ata2: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 21
[    1.415021] scsi host3: pata_via
[    1.415166] scsi host4: pata_via
[    1.415250] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
[    1.415252] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
[    1.415786] scsi host2: ahci
[    1.415950] scsi host5: ahci
[    1.416799] scsi host6: pata_jmicron
[    1.416945] scsi host7: pata_jmicron
[    1.417026] ata7: PATA max UDMA/100 cmd 0xbc00 ctl 0xb800 bmdma 0xac00 irq 29
[    1.417028] ata8: PATA max UDMA/100 cmd 0xb400 ctl 0xb000 bmdma 0xac08 irq 29
[    1.427297] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000
[    1.620039] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.730742] ata6: SATA link down (SStatus 0 SControl 300)
[    1.732427] ata5: SATA link down (SStatus 0 SControl 300)
[    1.836046] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.846954] scsi 3:0:0:0: Direct-Access     ATA      MAXTOR STM332062 D    PQ: 0 ANSI: 5
[    1.876346] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    1.876627] sd 3:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.878720] scsi 3:0:1:0: CD-ROM            ATAPI    DVD DW 8X16X8X16 L.02 PQ: 0 ANSI: 5
[    1.903191] sr 3:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.903531] sr 3:0:1:0: Attached scsi CD-ROM sr0
[    1.903811] sr 3:0:1:0: Attached scsi generic sg1 type 5
[    1.949226] sd 3:0:0:0: [sda] Attached SCSI disk
[    6.744038] usb 1-2: device descriptor read/64, error -110
[   12.477430] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   17.134771] snd_hda_intel 0000:04:01.0: CORB reset timeout#1, CORBRP = 0
[   17.339614] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[   20.156052] snd_hda_intel 0000:02:00.1: azx_get_response timeout, switching to polling mode: last cmd=0x000f0001
[   22.360041] usb 1-2: device descriptor read/64, error -110
[   27.740040] usb 1-2: device descriptor read/64, error -110
[   43.352044] usb 1-2: device descriptor read/64, error -110
[   54.192318] usb 1-2: device not accepting address 4, error -110
[   64.944047] usb 1-2: device not accepting address 5, error -110
[   67.155010] scsi host8: usb-storage 1-5:1.0
[   68.160876] scsi 8:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[   68.161355] scsi 8:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[   68.161975] scsi 8:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[   68.162475] scsi 8:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[   68.162921] sd 8:0:0:0: Attached scsi generic sg2 type 0
[   68.163190] sd 8:0:0:1: Attached scsi generic sg3 type 0
[   68.163459] sd 8:0:0:2: Attached scsi generic sg4 type 0
[   68.163721] sd 8:0:0:3: Attached scsi generic sg5 type 0
[   68.176640] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[   68.178497] sd 8:0:0:1: [sdc] Attached SCSI removable disk
[   68.179508] sd 8:0:0:2: [sdd] Attached SCSI removable disk
[   68.181555] sd 8:0:0:3: [sde] Attached SCSI removable disk
[   70.490662] usb 2-2: device descriptor read/64, error -110
[   86.104148] usb 2-2: device descriptor read/64, error -110
[   91.484222] usb 2-2: device descriptor read/64, error -110
[  107.096106] usb 2-2: device descriptor read/64, error -110
[  117.936080] usb 2-2: device not accepting address 4, error -110
[  128.696042] usb 2-2: device not accepting address 5, error -110
[  152.479877] usb 1-2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[  156.167991] wlxb0487a88a93c: RX AssocResp from 00:19:70:90:46:f4 (capab=0x431 status=0 aid=5)


_____________________________________ Xorg ____________________________________

xinput:
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ Logitech USB Optical Mouse              	id=10	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Power Button                            	id=7	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=8	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=9	[slave  keyboard (3)]


xrandr:
Screen 0: minimum 640 x 480, current 640 x 480, maximum 640 x 480
default connected primary 640x480+0+0 0mm x 0mm
   640x480       73.00* 


Selection of relevent log entries:
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    38.046] (==) No Layout section.  Using the first Screen section.
[    38.046] (==) No screen section available. Using defaults.
[    38.046] (**) |-->Screen "Default Screen Section" (0)
[    38.046] (**) |   |-->Monitor "<default monitor>"
[    38.117] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    38.162] (--) PCI:*(0:2:0:0) 1002:6758:174b:e194 rev 0, Mem @ 0xc0000000/268435456, 0xdfec0000/131072, I/O @ 0x0000cc00/256, BIOS @ 0x????????/131072
[    38.162] (II) LoadModule: "glx"
[    38.215] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    43.188] (II) LoadModule: "ati"
[    43.188] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    43.189] (II) LoadModule: "radeon"
[    43.189] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    43.268] (II) LoadModule: "modesetting"
[    43.268] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    43.268] (II) LoadModule: "fbdev"
[    43.268] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    43.268] (II) LoadModule: "vesa"
[    43.269] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    43.297] (EE) open /dev/dri/card0: No such file or directory
[    43.297] (WW) Falling back to old probe method for modesetting
[    43.297] (EE) open /dev/dri/card0: No such file or directory
[    43.297] (II) Loading sub module "fbdevhw"
[    43.297] (II) LoadModule: "fbdevhw"
[    43.297] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    43.297] (WW) Falling back to old probe method for vesa
[    43.297] (EE) Screen 0 deleted because of no matching config section.
[    43.297] (II) UnloadModule: "radeon"
[    43.297] (EE) Screen 0 deleted because of no matching config section.
[    43.297] (II) UnloadModule: "modesetting"
[    43.297] (II) FBDEV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    43.297] (II) FBDEV(0): checking modes against monitor...
[    43.297] (II) Loading sub module "fb"
[    43.297] (II) LoadModule: "fb"
[    43.298] (II) Loading /usr/lib/xorg/modules/libfb.so
[    43.312] (II) Loading sub module "shadow"
[    43.312] (II) LoadModule: "shadow"
[    43.312] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    43.370] (II) UnloadModule: "vesa"
[    43.370] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[    43.503] (II) AIGLX: Screen 0 is not DRI2 capable
[    43.503] (EE) AIGLX: reverting to software rendering
[    45.080] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    45.220] (II) LoadModule: "evdev"
[    45.220] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so


GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-53-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-53-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? no
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 1002:6758
BusID "PCI:2@0:0:0"
Is boot vga? yes
Error: can't access /sys/bus/pci/devices/0000:02:00.0/driver
The device is not bound to any driver. Skipping...
Error : Failed to open /dev/dri
Error : Failed to open /dev/dri
Error : Failed to open /dev/dri
Error : Failed to open /dev/dri
Does it require offloading? no
last cards number = 0
Has amd? no
Has intel? no
Has nvidia? no
How many cards? 0
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no


============================ Disks SMART Attributes ===========================

### ATA disks: sda

# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Maxtor DiamondMax 21
Device Model:     MAXTOR STM3320620A
Firmware Version: 3.AAD
User Capacity:    320 072 933 376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7 (minor revision not indicated)
Local Time is:    Sat Jun  3 15:55:35 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   117   098   006    -    132425886
  3 Spin_Up_Time            PO----   096   095   000    -    0
  4 Start_Stop_Count        -O--CK   086   086   020    -    14702
  5 Reallocated_Sector_Ct   PO--CK   100   100   036    -    2
  7 Seek_Error_Rate         POSR--   078   060   030    -    43638744503
  9 Power_On_Hours          -O--CK   086   086   000    -    13108
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   086   086   020    -    14771
187 Reported_Uncorrect      -O--CK   001   001   000    -    125
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   059   051   045    -    41 (Min/Max 40/41)
194 Temperature_Celsius     -O---K   041   049   000    -    41 (0 13 0 0 0)
195 Hardware_ECC_Recovered  -O-RC-   072   057   000    -    16324511
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
198 Offline_Uncorrectable   ----C-   100   100   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ------   100   253   000    -    0
202 Data_Address_Mark_Errs  -O--CK   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
ATA Error Count: 125 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 125 occurred at disk power-on lifetime: 3249 hours (135 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 72 43 9c e0  Error: UNC at LBA = 0x009c4372 = 10240882

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff 42 9c e0 00      00:07:37.406  READ DMA EXT
  25 00 80 21 1b 62 e0 00      00:07:37.405  READ DMA EXT
  35 00 02 4b 00 60 e0 00      00:07:37.404  WRITE DMA EXT
  25 00 80 4b 00 60 e0 00      00:07:37.403  READ DMA EXT
  25 00 80 a3 8e 63 e0 00      00:07:37.402  READ DMA EXT

Error 124 occurred at disk power-on lifetime: 3229 hours (134 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 72 43 9c e0  Error: UNC at LBA = 0x009c4372 = 10240882

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 80 ff 42 9c e0 00      00:17:16.494  READ DMA EXT
  35 00 80 af 5a 67 e0 00      00:17:16.504  WRITE DMA EXT
  25 00 80 d7 d7 ce e0 00      00:17:16.503  READ DMA EXT
  35 00 80 2f 5a 67 e0 00      00:17:16.503  WRITE DMA EXT
  25 00 80 57 d7 ce e0 00      00:17:16.502  READ DMA EXT

Error 123 occurred at disk power-on lifetime: 3224 hours (134 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 05 72 43 9c e0  Error: UNC 5 sectors at LBA = 0x009c4372 = 10240882

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 05 72 43 9c e0 00      00:12:07.691  READ DMA EXT
  27 00 00 00 00 00 e0 00      00:12:05.806  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 02      00:12:05.737  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 02      00:12:05.722  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:12:09.844  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 122 occurred at disk power-on lifetime: 3224 hours (134 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 05 72 43 9c e0  Error: UNC 5 sectors at LBA = 0x009c4372 = 10240882

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 05 72 43 9c e0 00      00:12:07.691  READ DMA EXT
  27 00 00 00 00 00 e0 00      00:12:05.806  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 02      00:12:05.737  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 02      00:12:05.722  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:12:05.705  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 121 occurred at disk power-on lifetime: 3224 hours (134 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 05 72 43 9c e0  Error: UNC 5 sectors at LBA = 0x009c4372 = 10240882

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 05 72 43 9c e0 00      00:12:01.671  READ DMA EXT
  27 00 00 00 00 00 e0 00      00:12:05.806  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 02      00:12:05.737  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 02      00:12:05.722  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:12:05.705  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]



### USB disks: sdb sdc sdd sde

# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sdc:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sdd:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sde:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.




=============================== StdErr Messages ===============================

xrandr: Failed to get size of gamma for output default

Hors ligne

#32 Le 03/06/2017, à 15:06

DANIELF01

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

bonjour, voici le retour de la cde: dmesg -T | grep -i "tpm\|cpuidle"

danarrow@danarrow-System-Product-Name:~$ dmesg -T | grep -i "tpm\|cpuidle"
[sam. juin  3 15:29:19 2017] cpuidle: using governor ladder
[sam. juin  3 15:29:19 2017] cpuidle: using governor menu
[sam. juin  3 15:29:20 2017] ima: No TPM chip found, activating TPM-bypass!
danarrow@danarrow-System-Product-Name:~$ 

merci encore!
Daniel

Hors ligne

#33 Le 04/06/2017, à 14:26

LeoMajor

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

ben, j'ai l'impression que tu tournes sous du vesa ou pseudo vesa ( 640x480@73.00hz ), ancienne carte mère  avec un chipet graphique intégré ( pilote openchrome), mais inhibé au niveau du bios ou non détecté, cpu non hybride.

si la mémoire graphique de la radeon est faible (256 Mo), cela sera insuffisant avec compiz & unity, et préferer xubuntu. 

_teste avec radeon
soit éditer le /etc/default/grub ou autre méthode  booter  au menu du grub, Editer (touche E je crois) , Compléter et Booter (F10)

 
radeon.modeset=1 radeon.pcie_gen2=0 radeon.dpm=0

_essaie aussi avec vesa ou openchrome

sudo apt install xserver-xorg-video-openchrome   # ou xserver-xorg-video-vesa

éditer le /etc/default/grub

GRUB_CMDLINE_LINUX_DEFAULT="nomodeset  video=1024x768 " 

à chaque modification de ce fichier

sudo update-grub

pour dépanner en 640x480,
-installe  arandr

 sudo apt install arandr

-puis tape

unxrandr
arandr

     
pour compléter

video="nom_du_connecteur":1280x1024

Hors ligne

#34 Le 04/06/2017, à 20:06

DANIELF01

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

Bonsoir LeoMajor,
j'ai édité et rajouté la ligne que tu m'as dit: GRUB_CMDLINE_LINUX_DEFAULT="nomodeset  video=1024x768 " dans le grub

  GNU nano 2.5.3    Fichier : /etc/default/grub               

# If you change this file, run 'update-grub' afterwards to up$
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debi$
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset  video=1024x768 "
GRUB_CMDLINE_LINUX=""
radeon.modeset=1 radeon.pcie_gen2=0 radeon.dpm=0

# Uncomment to enable BadRAM filtering, modify to suit your n$
# This works with Linux (no patch required) and with any kern$
# the memory map information from GRUB (GNU Mach, kernel of F$
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

                   [ Lecture de 35 lignes ]
^G Aide     ^O Écrire   ^W Chercher ^K Couper   ^J Justifier
^X Quitter  ^R Lire fich^\ Remplacer^U Coller   ^T Orthograp.

et lors du sudo update-grub , voici le retour:

sudo update-grub
/usr/sbin/grub-mkconfig: 13: /etc/default/grub: radeon.modeset=1: not found
danarrow@danarrow-System-Product-Name:~$ 

Hors ligne

#35 Le 04/06/2017, à 21:09

LeoMajor

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

non, c'est 2 choix distincts;
A/ avec radeon

GRUB_CMDLINE_LINUX_DEFAULT="radeon.modeset=1 radeon.pcie_gen2=0 radeon.dpm=0"

B/ avec vesa ou openchrome

GRUB_CMDLINE_LINUX_DEFAULT="nomodeset  video=1024x768"

C/ autre possibilité avec radeon

éditer et insérer dans le fichier suivant /etc/initramfs-tools/modules

sudo nano /etc/initramfs-tools/modules
drm
radeon  modeset=1  pcie_gen2=0  dpm=0

executer

sudo  update-initramfs  -u -k $(uname -r)
sudo update-grub

et redémarrer

Hors ligne

#36 Le 05/06/2017, à 08:46

DANIELF01

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

Bonjour LeoMajor,

voici le résultats des trois tests:

A/ avec radeon
GRUB_CMDLINE_LINUX_DEFAULT="radeon.modeset=1 radeon.pcie_gen2=0 radeon.dpm=0"
résultat: écran figé

B/ avec vesa ou openchrome
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset  video=1024x768"
Résultat: cela fonctionne mais mauvaise résolution (640x480)

C/ autre possibilité avec radeon
éditer et insérer dans le fichier suivant /etc/initramfs-tools/modules
sudo nano /etc/initramfs-tools/modules
drm
radeon  modeset=1  pcie_gen2=0  dpm=0
executer:sudo  update-initramfs  -u -k $(uname -r)
sudo update-grub
résultat: écran figée

NB: j'avais déjà testé avec un autre moniteur: j'avais un écran figé
J'en conclu qu' avec ma configuration Ubuntu 16.04 n'arrive pas à gérer les écrans.
Mon écran est un DELL Modèle N° D1028LR (il accepte 1280x1240 60hz)

merci encore

Hors ligne

#37 Le 05/06/2017, à 10:20

lepetit

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

jcomprends pas, ton ecran est branché sur ta carte graphique ou ton chipset ?


1)pc principale: core i3 4170, 8go de ram, nvidia 960 @ ubuntu 17.10
2)mini pc: amd 5350 mini itx fanless, 8go de ram, ssd @ linux mint cinnamon
3)mini pc 2: intel core 2 duo t4200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce
4)netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 16.04

Hors ligne

#38 Le 05/06/2017, à 10:43

DANIELF01

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

bonjour LePetit,

ton écran est branché sur ta carte graphique ou ton chipset ?

je ne sais pas: quelle ligne de commande je dois effectuer pour te répondre?
merci

Hors ligne

#39 Le 05/06/2017, à 12:06

lepetit

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

.... aucune, juste regarder ou est foutu mis le cable de l'écran, si il est mis sur la carte mere ou la carte graphique


1)pc principale: core i3 4170, 8go de ram, nvidia 960 @ ubuntu 17.10
2)mini pc: amd 5350 mini itx fanless, 8go de ram, ssd @ linux mint cinnamon
3)mini pc 2: intel core 2 duo t4200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce
4)netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 16.04

Hors ligne

#40 Le 05/06/2017, à 12:30

LeoMajor

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

bonjour,

donne le retour des commandes

lspci -nn -k | awk '/\[03..\]/,/driver/'
while read item; do echo -e "${item} valeur=$(cat ${item} 2>/dev/null)"; udevadm info -q all -p "${item}" 2>/dev/null ; done  < <(find /sys/devices -regex "^/sys/devices/.*0[0-9]:0[0-9]\.0/.*") | grep boot_vga

Hors ligne

#41 Le 05/06/2017, à 13:20

DANIELF01

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

Re-bonjour LePetit,

mon écran est bien branché sur la carte Graphique Radéon HD6670

Hors ligne

#42 Le 05/06/2017, à 13:25

DANIELF01

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

Bonjour LéoMajor,

voici le retour des cdes demandées:

danarrow@danarrow-System-Product-Name:~$ lspci -nn -k | awk '/\[03..\]/,/driver/'
02:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Turks XT [Radeon HD 6670/7670] [1002:6758]
	Subsystem: PC Partner Limited / Sapphire Technology Turks XT [Radeon HD 6670/7670] [174b:e194]
	Kernel modules: radeon
02:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Turks/Whistler HDMI Audio [Radeon HD 6000 Series] [1002:aa90]
	Subsystem: PC Partner Limited / Sapphire Technology Turks/Whistler HDMI Audio [Radeon HD 6000 Series] [174b:aa90]
	Kernel driver in use: snd_hda_intel
danarrow@danarrow-System-Product-Name:~$ 

le retour de la seconde commande:

danarrow@danarrow-System-Product-Name:~$ while read item; do echo -e "${item} valeur=$(cat ${item} 2>/dev/null)"; udevadm info -q all -p "${item}" 2>/dev/null ; done  < <(find /sys/devices -regex "^/sys/devices/.*0[0-9]:0[0-9]\.0/.*") | grep boot_vga
/sys/devices/pci0000:00/0000:00:02.0/0000:02:00.0/boot_vga valeur=1
danarrow@danarrow-System-Product-Name:~$ 

Dernière modification par DANIELF01 (Le 05/06/2017, à 13:28)

Hors ligne

#43 Le 05/06/2017, à 14:14

LeoMajor

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

tu n'as pas de dri sur la radeon
à tester

sudo aptitude  purge libegl1-mesa-lts-xenial libgl1-mesa-glx-lts-xenial libglapi-mesa-lts-xenial libgles1-mesa-lts-xenial libgles2-mesa-lts-xenial libwayland-egl1-mesa-lts-xenial mesa-vdpau-drivers mesa-vdpau-drivers-lts-xenial

sudo aptitude install libegl1-mesa libegl1-mesa-drivers libgl1-mesa-dri libgl1-mesa-glx libglapi-mesa libgles2-mesa libglu1-mesa libglw1-mesa libopenvg1-mesa libosmesa6 libwayland-egl1-mesa mesa-utils mesa-utils-extra

sudo aptitude install libvdpau-va-gl1 libvdpau1 vdpau-va-driver vdpauinfo gstreamer1.0-vaapi libgstreamer-vaapi1.0-0

Hors ligne

#44 Le 05/06/2017, à 20:26

DANIELF01

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

Bonsoir LeoMajor,
j'ai du ajouter à ma liste de dépôts: le ppa: xorg-edgers pour pouvoir installer certains paquets.

j'ai installé tous les paquets sauf [b]libopenvg1-mesa[/b]; [b]libosmesa6[/b] et [b]libstreamer-vaapi1.0-0[/b]: Il ne trouve pas ces 3 paquets. je les ai retirés de la commande puis j'ai éxécuté la cde puis j'ai fait un sudo apt-get update && sudo apt-get full-upgrade et j'ai redémarré.
Résultat: pas d'amélioration: écran toujours en 640x480

Merci encore

Hors ligne

#45 Le 05/06/2017, à 23:13

LeoMajor

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

regarde dans les logs

dmesg -T | grep -i "drm\|\<dri\>\|radeon"
grep -i "\<dri\>\|drm\|radeon\|err" /var/log/Xorg.0.log
sudo lsof -p $(pidof X) | egrep 'drm|dri|radeon'
while read item; do echo -e "${item} valeur=$(cat ${item} 2>/dev/null)"; udevadm info -q all -p "${item}" 2>/dev/null ; done  < <(find /sys/devices -regex "^/sys/devices/.*02:00\.0/.*") | grep "drm\|dri"

du déjà vu

sudo aptitude reinstall  libdrm-radeon1 radeontop xserver-xorg-video-ati-lts-xenial xserver-xorg-video-radeon-lts-xenial

teste aussi sans options grub

GRUB_CMDLINE_LINUX_DEFAULT=""

Hors ligne

#46 Le 08/06/2017, à 19:26

DANIELF01

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

Bonjour LéoMajor,
voilà une bonne chose:
en cherchant sur le Net, pourquoi le pilote libre Radeon n'était pas chargé: j'ai vu qu'il fallait enlever l'option "nomodeset" du fichier grub.conf

En lançant la commande lshw -c video, dans le retour, il y a une ligne [b]configuaration: driver= radeon latency=0[/b]
qui signifie que le pilote libre RADEON est bien chargé

Bon j'ai toujours un écran figé

En éditant le fichier /var/log/Xorg.0.log j'ai relevé quelques erreurs:
no layout section
no screen section available
no monitor specified for screen "Default screen Section"
could'nt open module ATI

Dois-je paramétrer manuellement les sections manquantes du serveur graphique Xorg ?
si oui , j'aurai besoin d'un coup de main

Hors ligne

#47 Le 08/06/2017, à 20:02

ylag

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

Bonsoir,

DANIELF01 a écrit :

en cherchant sur le Net, pourquoi le pilote libre Radeon n'était pas chargé: j'ai vu qu'il fallait enlever l'option "nomodeset" du fichier grub.conf

Au commentaire #25, je vous suggérais de tenter un redémarrage sans l'option nomodeset. Je n'aurai pas été assez clair, désolé...

A+

Hors ligne

#48 Le 08/06/2017, à 20:02

LeoMajor

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

bonsoir,
oui cela va de soit que radeon fonctionne en kms.   radeon.modeset=1  (par défaut)
Tu ne l'avais pas compris ?

donne le retour de

cat  /var/log/Xorg.0.log

tu as peut-être un problème de version pci express/ carte mère

sudo lspci -s 02:00.0 -vv

pour compléter ou pas ?

 radeon.pcie_gen2=0 
 radeon.pcie_gen2=1
cat /etc/X11/xorg.conf
ls /etc/X11/xorg.conf.d/
sudo mv /etc/X11/xorg.conf  /etc/X11/xorg.conf.20170608

Hors ligne

#49 Le 09/06/2017, à 08:29

DANIELF01

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

Bonjour LeoMajor,

je précise que je suis en mode de récupération.

voici le retour concernant la  version pci express/ carte mère  :

danarrow@danarrow-System-Product-Name:~$ lspci -s 02:00.0 -vv
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Turks XT [Radeon HD 6670/7670] (prog-if 00 [VGA controller])
	Subsystem: PC Partner Limited / Sapphire Technology Turks XT [Radeon HD 6670/7670]
	Physical Slot: 0
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at dfec0000 (64-bit, non-prefetchable) [size=128K]
	Region 4: I/O ports at cc00 [size=256]
	Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel modules: radeon

Comme la commande cat /etc/X11/conf.org retourne pas de fichier de ce type, j'ai localisé mon xorg.conf : voici le retour de la commande locate xorg.conf

danarrow@danarrow-System-Product-Name:~$ locate xorg.conf
/home/danarrow/xorg.conf.new
/usr/share/X11/xorg.conf.d
/usr/share/X11/xorg.conf.d/10-amdgpu.conf
/usr/share/X11/xorg.conf.d/10-evdev.conf
/usr/share/X11/xorg.conf.d/10-quirks.conf
/usr/share/X11/xorg.conf.d/10-radeon.conf
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf
/usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf
/usr/share/X11/xorg.conf.d/50-synaptics.conf
/usr/share/X11/xorg.conf.d/50-vmmouse.conf
/usr/share/X11/xorg.conf.d/50-wacom.conf
/usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf
/usr/share/man/man5/xorg.conf.5.gz
/usr/share/man/man5/xorg.conf.d.5.gz
danarrow@danarrow-System-Product-Name:~$ 

merci encore de te pencher sur mon problème.

Hors ligne

#50 Le 09/06/2017, à 08:49

DANIELF01

Re : Ecran figé à l'installation (CG AMD RADEON HD6670)

Re-bonjour,
voici le fichier xorg.0.log (je l'ai édité en mode normal puis copié dans un dossier pour l'envoyer en mode de récupération)

[    48.331] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    48.331] X Protocol Version 11, Revision 0
[    48.331] Build Operating System: Linux 4.4.0-45-generic x86_64 Ubuntu
[    48.331] Current Operating System: Linux danarrow-System-Product-Name 4.8.0-54-generic #57~16.04.1-Ubuntu SMP Wed May 24 16:22:28 UTC 2017 x86_64
[    48.331] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-54-generic root=UUID=eff8c143-18ed-46fa-8b6f-680dc2d77c9f ro quiet splash vt.handoff=7
[    48.331] Build Date: 02 November 2016  10:06:10PM
[    48.331] xorg-server 2:1.18.4-0ubuntu0.2 (For technical support please see http://www.ubuntu.com/support) 
[    48.331] Current version of pixman: 0.33.6
[    48.331] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    48.331] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    48.331] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun  9 09:31:48 2017
[    48.368] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    48.368] (==) No Layout section.  Using the first Screen section.
[    48.368] (==) No screen section available. Using defaults.
[    48.368] (**) |-->Screen "Default Screen Section" (0)
[    48.368] (**) |   |-->Monitor "<default monitor>"
[    48.404] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    48.404] (==) Automatically adding devices
[    48.404] (==) Automatically enabling devices
[    48.404] (==) Automatically adding GPU devices
[    48.404] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    48.404] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    48.404] 	Entry deleted from font path.
[    48.404] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    48.404] 	Entry deleted from font path.
[    48.404] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    48.404] 	Entry deleted from font path.
[    48.404] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    48.404] 	Entry deleted from font path.
[    48.404] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    48.404] 	Entry deleted from font path.
[    48.404] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    48.404] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    48.404] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    48.465] (II) Loader magic: 0x563553debdc0
[    48.465] (II) Module ABI versions:
[    48.465] 	X.Org ANSI C Emulation: 0.4
[    48.465] 	X.Org Video Driver: 20.0
[    48.465] 	X.Org XInput driver : 22.1
[    48.465] 	X.Org Server Extension : 9.0
[    48.466] (++) using VT number 7

[    48.466] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    48.467] (II) xfree86: Adding drm device (/dev/dri/card0)
[    48.470] (--) PCI:*(0:2:0:0) 1002:6758:174b:e194 rev 0, Mem @ 0xc0000000/268435456, 0xdfec0000/131072, I/O @ 0x0000cc00/256, BIOS @ 0x????????/131072
[    48.470] (II) LoadModule: "glx"
[    48.552] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    49.326] (II) Module glx: vendor="X.Org Foundation"
[    49.326] 	compiled for 1.18.4, module version = 1.0.0
[    49.326] 	ABI class: X.Org Server Extension, version 9.0
[    49.326] (==) AIGLX enabled
[    49.326] (II) Applying OutputClass "Radeon" to /dev/dri/card0
[    49.326] 	loading driver: radeon
[    49.326] (==) Matched radeon as autoconfigured driver 0
[    49.326] (==) Matched ati as autoconfigured driver 1
[    49.326] (==) Matched ati as autoconfigured driver 2
[    49.326] (==) Matched modesetting as autoconfigured driver 3
[    49.326] (==) Matched fbdev as autoconfigured driver 4
[    49.326] (==) Matched vesa as autoconfigured driver 5
[    49.326] (==) Assigned the driver to the xf86ConfigLayout
[    49.326] (II) LoadModule: "radeon"
[    49.326] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    49.357] (II) Module radeon: vendor="X.Org Foundation"
[    49.357] 	compiled for 1.18.4, module version = 7.8.99
[    49.357] 	Module class: X.Org Video Driver
[    49.357] 	ABI class: X.Org Video Driver, version 20.0
[    49.357] (II) LoadModule: "ati"
[    49.357] (WW) Warning, couldn't open module ati
[    49.357] (II) UnloadModule: "ati"
[    49.357] (II) Unloading ati
[    49.357] (EE) Failed to load module "ati" (module does not exist, 0)
[    49.357] (II) LoadModule: "modesetting"
[    49.358] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    49.358] (II) Module modesetting: vendor="X.Org Foundation"
[    49.358] 	compiled for 1.18.4, module version = 1.18.4
[    49.358] 	Module class: X.Org Video Driver
[    49.358] 	ABI class: X.Org Video Driver, version 20.0
[    49.358] (II) LoadModule: "fbdev"
[    49.358] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    49.358] (II) Module fbdev: vendor="X.Org Foundation"
[    49.358] 	compiled for 1.18.1, module version = 0.4.4
[    49.358] 	Module class: X.Org Video Driver
[    49.358] 	ABI class: X.Org Video Driver, version 20.0
[    49.358] (II) LoadModule: "vesa"
[    49.358] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    49.358] (II) Module vesa: vendor="X.Org Foundation"
[    49.358] 	compiled for 1.18.1, module version = 2.3.4
[    49.358] 	Module class: X.Org Video Driver
[    49.358] 	ABI class: X.Org Video Driver, version 20.0
[    49.358] (II) Applying OutputClass "Radeon" to /dev/dri/card0
[    49.358] 	loading driver: radeon
[    49.358] (==) Matched radeon as autoconfigured driver 0
[    49.358] (==) Matched ati as autoconfigured driver 1
[    49.358] (==) Matched ati as autoconfigured driver 2
[    49.358] (==) Matched modesetting as autoconfigured driver 3
[    49.358] (==) Matched fbdev as autoconfigured driver 4
[    49.358] (==) Matched vesa as autoconfigured driver 5
[    49.359] (==) Assigned the driver to the xf86ConfigLayout
[    49.359] (II) LoadModule: "radeon"
[    49.359] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    49.359] (II) Module radeon: vendor="X.Org Foundation"
[    49.359] 	compiled for 1.18.4, module version = 7.8.99
[    49.359] 	Module class: X.Org Video Driver
[    49.359] 	ABI class: X.Org Video Driver, version 20.0
[    49.359] (II) LoadModule: "ati"
[    49.359] (WW) Warning, couldn't open module ati
[    49.359] (II) UnloadModule: "ati"
[    49.359] (II) Unloading ati
[    49.359] (EE) Failed to load module "ati" (module does not exist, 0)
[    49.359] (II) LoadModule: "modesetting"
[    49.359] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    49.359] (II) Module modesetting: vendor="X.Org Foundation"
[    49.359] 	compiled for 1.18.4, module version = 1.18.4
[    49.359] 	Module class: X.Org Video Driver
[    49.359] 	ABI class: X.Org Video Driver, version 20.0
[    49.359] (II) UnloadModule: "modesetting"
[    49.359] (II) Unloading modesetting
[    49.359] (II) Failed to load module "modesetting" (already loaded, 0)
[    49.359] (II) LoadModule: "fbdev"
[    49.360] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    49.360] (II) Module fbdev: vendor="X.Org Foundation"
[    49.360] 	compiled for 1.18.1, module version = 0.4.4
[    49.360] 	Module class: X.Org Video Driver
[    49.360] 	ABI class: X.Org Video Driver, version 20.0
[    49.360] (II) UnloadModule: "fbdev"
[    49.360] (II) Unloading fbdev
[    49.360] (II) Failed to load module "fbdev" (already loaded, 0)
[    49.360] (II) LoadModule: "vesa"
[    49.360] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    49.360] (II) Module vesa: vendor="X.Org Foundation"
[    49.360] 	compiled for 1.18.1, module version = 2.3.4
[    49.360] 	Module class: X.Org Video Driver
[    49.360] 	ABI class: X.Org Video Driver, version 20.0
[    49.360] (II) UnloadModule: "vesa"
[    49.360] (II) Unloading vesa
[    49.360] (II) Failed to load module "vesa" (already loaded, 0)
[    49.360] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
	ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
	ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
	ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
	ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
	ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
	ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
	ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
	ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
	ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
	ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
	ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
	ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
	ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
	ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
	ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
	ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
	ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
	ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
	ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
	ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
	ATI Radeon 9800PRO, ATI Radeon 9800XT,
	ATI Radeon Mobility 9600/9700 (M10/M11),
	ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
	ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
	ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
	ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
	ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
	ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
	ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
	ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
	ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
	ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
	ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
	ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
	ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
	ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
	ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
	ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
	ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
	ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
	ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
	ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
	ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
	ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
	ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
	ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
	ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
	ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
	ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
	ATI FireGL V3350, ATI Mobility Radeon X1450,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
	ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
	ATI FireGL V3400, ATI Mobility FireGL V5250,
	ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
	ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
	ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
	ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
	ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
	ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
	ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
	ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
	ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
	AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
	ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
	ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
	ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
	ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
	ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
	ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
	ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
	ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
	ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
	ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
	ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
	REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
	ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
	AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
	ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
	MULLINS, KAVERI, HAWAII
[    49.363] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    49.363] (II) FBDEV: driver for framebuffer: fbdev
[    49.363] (II) VESA: driver for VESA chipsets: vesa
[    49.419] (II) [KMS] Kernel modesetting enabled.
[    49.419] (WW) Falling back to old probe method for modesetting
[    49.420] (WW) Falling back to old probe method for fbdev
[    49.420] (II) Loading sub module "fbdevhw"
[    49.420] (II) LoadModule: "fbdevhw"
[    49.420] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    49.420] (II) Module fbdevhw: vendor="X.Org Foundation"
[    49.420] 	compiled for 1.18.4, module version = 0.0.2
[    49.420] 	ABI class: X.Org Video Driver, version 20.0
[    49.420] (WW) Falling back to old probe method for vesa
[    49.420] (II) RADEON(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    49.420] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    49.420] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    49.420] (==) RADEON(0): Default visual is TrueColor
[    49.420] (==) RADEON(0): RGB weight 888
[    49.420] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    49.420] (--) RADEON(0): Chipset: "TURKS" (ChipID = 0x6758)
[    49.421] (II) Loading sub module "fb"
[    49.421] (II) LoadModule: "fb"
[    49.421] (II) Loading /usr/lib/xorg/modules/libfb.so
[    49.440] (II) Module fb: vendor="X.Org Foundation"
[    49.440] 	compiled for 1.18.4, module version = 1.0.0
[    49.440] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    49.440] (II) Loading sub module "dri2"
[    49.440] (II) LoadModule: "dri2"
[    49.440] (II) Module "dri2" already built-in
[    49.440] (II) Loading sub module "glamoregl"
[    49.440] (II) LoadModule: "glamoregl"
[    49.440] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    49.583] (II) Module glamoregl: vendor="X.Org Foundation"
[    49.583] 	compiled for 1.18.4, module version = 1.0.0
[    49.583] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    49.583] (II) glamor: OpenGL accelerated X.org driver based.
[    51.619] (II) glamor: EGL version 1.4 (DRI2):
[    51.694] (II) RADEON(0): glamor detected, initialising EGL layer.
[    51.694] (II) RADEON(0): KMS Color Tiling: enabled
[    51.694] (II) RADEON(0): KMS Color Tiling 2D: enabled
[    51.694] (II) RADEON(0): KMS Pageflipping: enabled
[    51.841] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[    51.842] (II) RADEON(0): Output HDMI-0 has no monitor section
[    51.879] (II) RADEON(0): Output DVI-0 has no monitor section
[    52.024] (II) RADEON(0): EDID for output DisplayPort-0
[    52.026] (II) RADEON(0): EDID for output HDMI-0
[    52.063] (II) RADEON(0): EDID for output DVI-0
[    52.063] (II) RADEON(0): Manufacturer: DEL  Model: 730b  Serial#: 1110979923
[    52.063] (II) RADEON(0): Year: 1998  Week: 43
[    52.063] (II) RADEON(0): EDID Version: 1.1
[    52.063] (II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    52.063] (II) RADEON(0): Sync:  Separate
[    52.063] (II) RADEON(0): Max Image Size [cm]: horiz.: 30  vert.: 23
[    52.063] (II) RADEON(0): Gamma: 2.85
[    52.063] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    52.063] (II) RADEON(0): redX: 0.625 redY: 0.340   greenX: 0.285 greenY: 0.605
[    52.063] (II) RADEON(0): blueX: 0.150 blueY: 0.065   whiteX: 0.281 whiteY: 0.311
[    52.063] (II) RADEON(0): Supported established timings:
[    52.063] (II) RADEON(0): 720x400@70Hz
[    52.063] (II) RADEON(0): 640x480@60Hz
[    52.063] (II) RADEON(0): 640x480@75Hz
[    52.063] (II) RADEON(0): 800x600@60Hz
[    52.063] (II) RADEON(0): 800x600@75Hz
[    52.063] (II) RADEON(0): 1024x768@60Hz
[    52.063] (II) RADEON(0): 1024x768@75Hz
[    52.063] (II) RADEON(0): Manufacturer's mask: 0
[    52.063] (II) RADEON(0): Supported standard timings:
[    52.063] (II) RADEON(0): #0: hsize: 1024  vsize 768  refresh: 85  vid: 22881
[    52.063] (II) RADEON(0): #1: hsize: 800  vsize 600  refresh: 85  vid: 22853
[    52.063] (II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    52.063] (II) RADEON(0): #3: hsize: 640  vsize 480  refresh: 85  vid: 22833
[    52.063] (II) RADEON(0): Supported detailed timing:
[    52.063] (II) RADEON(0): clock: 28.3 MHz   Image Size:  250 x 184 mm
[    52.063] (II) RADEON(0): h_active: 720  h_sync: 738  h_sync_end 846 h_blank_end 900 h_border: 0
[    52.063] (II) RADEON(0): v_active: 350  v_sync: 388  v_sync_end 390 v_blanking: 449 v_border: 0
[    52.063] (II) RADEON(0): Serial No: 85270LB85SA8
[    52.063] (II) RADEON(0): Monitor name: DELL D1028LR
[    52.063] (II) RADEON(0): Ranges: V min: 48 V max: 120 Hz, H min: 30 H max: 69 kHz,
[    52.063] (II) RADEON(0): EDID (in hex):
[    52.063] (II) RADEON(0): 	00ffffffffffff0010ac0b7353353842
[    52.063] (II) RADEON(0): 	2b080101081e17b9e800b2a057499b26
[    52.063] (II) RADEON(0): 	10484fa54a0061594559818031590101
[    52.063] (II) RADEON(0): 	010101010101100bd0b4205e6310126c
[    52.063] (II) RADEON(0): 	6208fab80000001a000000ff00383532
[    52.063] (II) RADEON(0): 	37304c4238355341380a000000fc0044
[    52.063] (II) RADEON(0): 	454c4c2044313032384c520a000000fd
[    52.063] (II) RADEON(0): 	0030781e45ff000a20202020202000a4
[    52.063] (II) RADEON(0): Printing probed modes for output DVI-0
[    52.063] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    52.063] (II) RADEON(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz e)
[    52.063] (II) RADEON(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    52.063] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    52.063] (II) RADEON(0): Modeline "800x600"x85.1   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz e)
[    52.063] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    52.063] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    52.063] (II) RADEON(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz e)
[    52.063] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    52.063] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    52.063] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    52.063] (II) RADEON(0): Modeline "720x350"x70.1   28.32  720 738 846 900  350 388 390 449 +hsync -vsync (31.5 kHz e)
[    52.063] (II) RADEON(0): Output DisplayPort-0 disconnected
[    52.063] (II) RADEON(0): Output HDMI-0 disconnected
[    52.063] (II) RADEON(0): Output DVI-0 connected
[    52.063] (II) RADEON(0): Using exact sizes for initial modes
[    52.063] (II) RADEON(0): Output DVI-0 using initial mode 1024x768 +0+0
[    52.063] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    52.063] (II) RADEON(0): mem size init: gart size :3fdde000 vram size: s:40000000 visible:3f79d000
[    52.063] (==) RADEON(0): DPI set to (96, 96)
[    52.063] (II) Loading sub module "ramdac"
[    52.064] (II) LoadModule: "ramdac"
[    52.064] (II) Module "ramdac" already built-in
[    52.064] (II) UnloadModule: "modesetting"
[    52.064] (II) Unloading modesetting
[    52.064] (II) UnloadModule: "fbdev"
[    52.064] (II) Unloading fbdev
[    52.064] (II) UnloadSubModule: "fbdevhw"
[    52.064] (II) Unloading fbdevhw
[    52.064] (II) UnloadModule: "vesa"
[    52.064] (II) Unloading vesa
[    52.064] (--) Depth 24 pixmap format is 32 bpp
[    52.079] (II) RADEON(0): [DRI2] Setup complete
[    52.079] (II) RADEON(0): [DRI2]   DRI driver: r600
[    52.079] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[    52.079] (II) RADEON(0): Front buffer size: 3072K
[    52.079] (II) RADEON(0): VRAM usage limit set to 933138K
[    52.089] (II) RADEON(0): SYNC extension fences enabled
[    52.089] (II) RADEON(0): Present extension enabled
[    52.089] (==) RADEON(0): DRI3 enabled
[    52.090] (==) RADEON(0): Backing store enabled
[    52.090] (II) RADEON(0): Direct rendering enabled
[    52.313] (II) RADEON(0): Use GLAMOR acceleration.
[    52.313] (II) RADEON(0): Acceleration enabled
[    52.313] (==) RADEON(0): DPMS enabled
[    52.313] (==) RADEON(0): Silken mouse enabled
[    52.350] (II) RADEON(0): Set up textured video (glamor)
[    52.350] (II) RADEON(0): [XvMC] Associated with GLAMOR Textured Video.
[    52.350] (II) RADEON(0): [XvMC] Extension initialized.
[    52.350] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    52.413] (--) RandR disabled
[    52.430] (II) SELinux: Disabled on system
[    52.434] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    52.434] (II) AIGLX: enabled GLX_ARB_create_context
[    52.434] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    52.434] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    52.434] (II) AIGLX: enabled GLX_INTEL_swap_event
[    52.434] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    52.434] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    52.434] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    52.434] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    52.434] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    52.434] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    52.435] (II) AIGLX: Loaded and initialized r600
[    52.435] (II) GLX: Initialized DRI2 GL provider for screen 0
[    52.469] (II) RADEON(0): Setting screen physical size to 270 x 203
[    52.988] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    52.988] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    52.988] (II) LoadModule: "evdev"
[    52.988] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    53.099] (II) Module evdev: vendor="X.Org Foundation"
[    53.099] 	compiled for 1.18.1, module version = 2.10.1
[    53.099] 	Module class: X.Org XInput Driver
[    53.099] 	ABI class: X.Org XInput driver, version 22.1
[    53.099] (II) Using input driver 'evdev' for 'Power Button'
[    53.099] (**) Power Button: always reports core events
[    53.099] (**) evdev: Power Button: Device: "/dev/input/event2"
[    53.099] (--) evdev: Power Button: Vendor 0 Product 0x1
[    53.099] (--) evdev: Power Button: Found keys
[    53.099] (II) evdev: Power Button: Configuring as keyboard
[    53.099] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    53.099] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    53.099] (**) Option "xkb_rules" "evdev"
[    53.099] (**) Option "xkb_model" "pc105"
[    53.099] (**) Option "xkb_layout" "fr"
[    53.099] (**) Option "xkb_variant" "latin9"
[    53.131] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    53.131] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    53.131] (II) Using input driver 'evdev' for 'Power Button'
[    53.131] (**) Power Button: always reports core events
[    53.131] (**) evdev: Power Button: Device: "/dev/input/event0"
[    53.131] (--) evdev: Power Button: Vendor 0 Product 0x1
[    53.131] (--) evdev: Power Button: Found keys
[    53.131] (II) evdev: Power Button: Configuring as keyboard
[    53.131] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    53.131] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    53.131] (**) Option "xkb_rules" "evdev"
[    53.131] (**) Option "xkb_model" "pc105"
[    53.131] (**) Option "xkb_layout" "fr"
[    53.131] (**) Option "xkb_variant" "latin9"
[    53.132] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    53.132] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    53.132] (II) Using input driver 'evdev' for 'Sleep Button'
[    53.132] (**) Sleep Button: always reports core events
[    53.132] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    53.132] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    53.132] (--) evdev: Sleep Button: Found keys
[    53.132] (II) evdev: Sleep Button: Configuring as keyboard
[    53.132] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    53.132] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    53.133] (**) Option "xkb_rules" "evdev"
[    53.133] (**) Option "xkb_model" "pc105"
[    53.133] (**) Option "xkb_layout" "fr"
[    53.133] (**) Option "xkb_variant" "latin9"
[    53.134] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[    53.134] (II) No input driver specified, ignoring this device.
[    53.134] (II) This device may have been added with another device file.
[    53.134] (II) config/udev: Adding input device HDA VIA VT82xx Rear Mic (/dev/input/event4)
[    53.134] (II) No input driver specified, ignoring this device.
[    53.134] (II) This device may have been added with another device file.
[    53.135] (II) config/udev: Adding input device HDA VIA VT82xx Front Mic (/dev/input/event5)
[    53.135] (II) No input driver specified, ignoring this device.
[    53.135] (II) This device may have been added with another device file.
[    53.135] (II) config/udev: Adding input device HDA VIA VT82xx Line (/dev/input/event6)
[    53.135] (II) No input driver specified, ignoring this device.
[    53.135] (II) This device may have been added with another device file.
[    53.136] (II) config/udev: Adding input device HDA VIA VT82xx Line Out (/dev/input/event7)
[    53.136] (II) No input driver specified, ignoring this device.
[    53.136] (II) This device may have been added with another device file.
[    53.136] (II) config/udev: Adding input device HDA VIA VT82xx Front Headphone (/dev/input/event8)
[    53.136] (II) No input driver specified, ignoring this device.
[    53.136] (II) This device may have been added with another device file.
[    53.137] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    53.137] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    53.137] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    53.137] (**) AT Translated Set 2 keyboard: always reports core events
[    53.137] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    53.137] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    53.137] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    53.137] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    53.137] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    53.137] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    53.137] (**) Option "xkb_rules" "evdev"
[    53.137] (**) Option "xkb_model" "pc105"
[    53.137] (**) Option "xkb_layout" "fr"
[    53.137] (**) Option "xkb_variant" "latin9"
[    62.061] (II) RADEON(0): EDID vendor "DEL", prod id 29451
[    62.061] (II) RADEON(0): Using EDID range info for horizontal sync
[    62.061] (II) RADEON(0): Using EDID range info for vertical refresh
[    62.061] (II) RADEON(0): Printing DDC gathered Modelines:
[    62.061] (II) RADEON(0): Modeline "720x350"x0.0   28.32  720 738 846 900  350 388 390 449 +hsync -vsync (31.5 kHz e)
[    62.061] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    62.061] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    62.061] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    62.061] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    62.061] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    62.061] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    62.061] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    62.061] (II) RADEON(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz e)
[    62.061] (II) RADEON(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz e)
[    62.061] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    62.061] (II) RADEON(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz e)
[    62.555] (II) RADEON(0): EDID vendor "DEL", prod id 29451
[    62.555] (II) RADEON(0): Using hsync ranges from config file
[    62.555] (II) RADEON(0): Using vrefresh ranges from config file
[    62.555] (II) RADEON(0): Printing DDC gathered Modelines:
[    62.555] (II) RADEON(0): Modeline "720x350"x0.0   28.32  720 738 846 900  350 388 390 449 +hsync -vsync (31.5 kHz e)
[    62.555] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    62.555] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    62.555] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    62.555] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    62.555] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    62.555] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    62.555] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    62.555] (II) RADEON(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz e)
[    62.555] (II) RADEON(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz e)
[    62.555] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    62.555] (II) RADEON(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz e)
[    63.715] (II) RADEON(0): Allocate new frame buffer 1280x1024 stride 1280
[    63.720] (II) RADEON(0): VRAM usage limit set to 931294K
[    63.947] (II) RADEON(0): EDID vendor "DEL", prod id 29451
[    63.947] (II) RADEON(0): Using hsync ranges from config file
[    63.947] (II) RADEON(0): Using vrefresh ranges from config file
[    63.947] (II) RADEON(0): Printing DDC gathered Modelines:
[    63.947] (II) RADEON(0): Modeline "720x350"x0.0   28.32  720 738 846 900  350 388 390 449 +hsync -vsync (31.5 kHz e)
[    63.947] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    63.947] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    63.947] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    63.947] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    63.948] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    63.948] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    63.948] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    63.948] (II) RADEON(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz e)
[    63.948] (II) RADEON(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz e)
[    63.948] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    63.948] (II) RADEON(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz e)
[    65.513] (II) RADEON(0): EDID vendor "DEL", prod id 29451
[    65.513] (II) RADEON(0): Using hsync ranges from config file
[    65.513] (II) RADEON(0): Using vrefresh ranges from config file
[    65.513] (II) RADEON(0): Printing DDC gathered Modelines:
[    65.513] (II) RADEON(0): Modeline "720x350"x0.0   28.32  720 738 846 900  350 388 390 449 +hsync -vsync (31.5 kHz e)
[    65.513] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    65.513] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    65.513] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    65.513] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    65.513] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    65.513] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    65.513] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    65.513] (II) RADEON(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz e)
[    65.513] (II) RADEON(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz e)
[    65.513] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    65.513] (II) RADEON(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz e)
[    68.095] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    68.095] (II) No input driver specified, ignoring this device.
[    68.095] (II) This device may have been added with another device file.
[    68.096] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event10)
[    68.096] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    68.096] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    68.096] (**) Logitech USB Optical Mouse: always reports core events
[    68.096] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event10"
[    68.156] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc018
[    68.156] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[    68.156] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    68.156] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    68.156] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    68.156] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    68.156] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    68.156] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    68.156] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    68.156] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-2/4-2:1.0/0003:046D:C018.0001/input/input10/event10"
[    68.156] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)
[    68.157] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    68.157] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    68.157] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    68.157] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    68.157] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[   234.100] (II) AIGLX: Suspending AIGLX clients for VT switch

Hors ligne