Pages : 1
#1 Le 22/05/2017, à 09:10
- QLSVB
Ubuntu 16.04 vidéo saccade
Bonjour,
Je sais qu'il y a eu quelques discussion sur ce sujet mais je n'y ai pas trouvé la solution.
Mon soucis est que lors de lectures vidéo, après une certaine durée (genre 10 minutes il me semble que cela dépend de la qualité de vidéo), l'image commence à saccader quelques secondes. Puis elle redevient fluide pdt style 30 sec et saccade de nouveau quelques secondes etc... Le son lui continue sans autre et l'image, quand elle reprend, rejoint le son.
Ceci arrive autant lors de lectures sur internet (exemple: téléboy ou viméo), que lors de lectures de film enregistré sur mon disque dur.
Ce que je trouve étrange, c'est que j'ai un autre ordinateur portable qui a environ 10 ans. Sur celui-là j'avais installé il y a deux ans Ubuntu (14.04 x32) pour lui redonner vie et il n'a pas ce problème lors de lecture vidéo (par contre il est très lent pour tout le reste... :-)). Convaincu par Ubuntu, j'ai décidé d'aussi en faire l'installation (16.04) sur mon portable qui a environ deux ans et c'est avec celui-là que j'ai des soucis... D'ailleurs depuis cette installation il chauffe plus que sous windows et la batterie ce vide plus rapidement.
Voilà si quelqu'un a une idée, je l’accueillerais avec grande reconnaissance!
Excellente journée
Marc
P.S. je suis ce qu'on appellerais un vrai débutant. Mes compétences se limites à installer un programme ou recopier une commande dans le terminal... 
Hors ligne
#2 Le 22/05/2017, à 09:12
- Caribou22
Re : Ubuntu 16.04 vidéo saccade
Bonjour ! 
Peut-être un soucis de pilote graphique ? Peux-tu nous fournir un rapport bisnext ?
Pour ton vieux PC, regarde le lien 1 de ma signature s'il rame trop
Hors ligne
#3 Le 23/05/2017, à 08:48
- QLSVB
Re : Ubuntu 16.04 vidéo saccade
Bonjour!
Merci pour la réponse!
J'ai suivi la démarche indiquée pour fournir un rapport bisnext. Est-ce que le lien qui suit est suffisant? https://paste.debian.net/935010/
Pour info, entre deux j'ai "installer" ou "configuré" (je sais pas quel est le bon terme 
) zram.
Ok cool, merci pour l'info concernant mon vieux pc, j'irais lire tout ça!
Hors ligne
#4 Le 23/05/2017, à 08:59
- tarkan99
Re : Ubuntu 16.04 vidéo saccade
Salut !
un expert SMART pourra confirmer : le disque présente quelques soucis à mon sens (usure mécanique ?) :
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 17
11 Calibration_Retry_Count -O--CK 100 100 000 - 124
191 G-Sense_Error_Rate -O---K 100 100 000 - 686
199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 1
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 1277surtout le Multi_Zone_Error_Rate
Dans l'attente de l'avis d'un expert, je te conseille de vérifier que tes données sont bien sauvegardées.
G-Sense_Error_Rate 686 : le PC n'est pas un shaker ! as-t-il fait une chute importante en étant actif ?
Après, je ne peux pas dire que cela impact les perf pendant le décodage vidéo.
https://en.wikipedia.org/wiki/S.M.A.R.T.
Dernière modification par tarkan99 (Le 23/05/2017, à 09:05)
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#5 Le 23/05/2017, à 09:00
- Caribou22
Re : Ubuntu 16.04 vidéo saccade
C'est ça Je le colle ici :
May 23, 2017, bisnext report id f2d4b
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.8.0-52-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine: Device: laptop System: SAMSUNG product: 270E5G/270E5U v: 0.1
Mobo: SAMSUNG model: NP270E5G-K03CH v: FAB1
UEFI: Phoenix v: P03RCB date: 10/24/2013
Chassis: type: 9 v: 0.1
Battery BAT1: charge: 13.3 Wh 38.0% condition: 35.0/44.0 Wh (80%)
volts: 10.5/11.1
model: SAMSUNG status: Discharging
CPU: Dual core Intel Core i5-3230M (-HT-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10376
clock speeds: min/max: 1200/3200 MHz 1: 1223 MHz 2: 1208 MHz
3: 1399 MHz 4: 1250 MHz
Memory: Array-1 capacity: 32 GB devices: 4 EC: None
Device-1: ChannelA-DIMM0 size: 8 GB speed: 1333 MHz type: DDR3
manufacturer: Samsung part: M471B1G73DB0-YK0
Device-2: ChannelA-DIMM1 size: No Module Installed type: N/A
Device-3: ChannelB-DIMM0 size: No Module Installed type: N/A
Device-4: ChannelB-DIMM1 size: No Module Installed type: N/A
Graphics: Card: Intel 3rd Gen Core processor Graphics Controller
bus-ID: 00:02.0 chip-ID: 8086:0166
Display Server: X.Org 1.18.4 drivers: modesetting (unloaded: fbdev,vesa)
tty size: 1366x768@60.07hz
GLX Renderer: Mesa DRI Intel Ivybridge Mobile
GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
Audio: Card Intel 7 Series/C210 Series Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:1e20
Sound: Advanced Linux Sound Architecture v: k4.8.0-52-generic
Network: Card-1: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter
driver: ath9k bus-ID: 01:00.0 chip-ID: 168c:0036
IF: wlp1s0 state: up mac: <filter>
Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
driver: r8169 v: 2.3LK-NAPI port: 2000
bus-ID: 02:00.0 chip-ID: 10ec:8136
IF: enp2s0 state: down mac: <filter>
Drives: HDD Total Size: 750.2GB (48.9% used)
ID-1: /dev/sda model: ST750LM022_HN size: 750.2GB
Optical: /dev/sr0 model: Slimtype DVD A DU8A5SH
rev: NS21 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 680G used: 331G (52%) fs: ext4 dev: /dev/sda2
label: N/A uuid: 82f417d5-2749-48e9-9024-a113922280ff
ID-2: /boot/efi size: 511M used: 3.5M (1%) fs: vfat dev: /dev/sda1
label: N/A uuid: 57BE-F1D2
ID-3: swap-1 size: 8.46GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
label: N/A uuid: e25e1513-8c0f-469f-9eba-b926911389fb
ID-4: swap-2 size: 1.03GB used: 0.00GB (0%) fs: swap dev: /dev/zram0
label: N/A uuid: N/A
ID-5: swap-3 size: 1.03GB used: 0.00GB (0%) fs: swap dev: /dev/zram1
label: N/A uuid: N/A
ID-6: swap-4 size: 1.03GB used: 0.00GB (0%) fs: swap dev: /dev/zram2
label: N/A uuid: N/A
ID-7: swap-5 size: 1.03GB used: 0.00GB (0%) fs: swap dev: /dev/zram3
label: N/A uuid: N/A
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://ubuntu.ethz.ch/ubuntu/ xenial main restricted
deb http://ubuntu.ethz.ch/ubuntu/ xenial-updates main restricted
deb http://ubuntu.ethz.ch/ubuntu/ xenial universe
deb http://ubuntu.ethz.ch/ubuntu/ xenial-updates universe
deb http://ubuntu.ethz.ch/ubuntu/ xenial multiverse
deb http://ubuntu.ethz.ch/ubuntu/ xenial-updates multiverse
deb http://ubuntu.ethz.ch/ubuntu/ xenial-backports main restricted universe multiverse
deb http://archive.canonical.com/ubuntu xenial partner
deb-src http://archive.canonical.com/ubuntu xenial partner
deb http://ubuntu.ethz.ch/ubuntu/ xenial-security main restricted
deb http://ubuntu.ethz.ch/ubuntu/ xenial-security universe
deb http://ubuntu.ethz.ch/ubuntu/ xenial-security multiverse
Active apt sources in file: /etc/apt/sources.list.d/appgrid-ubuntu-stable-xenial.list
deb http://ppa.launchpad.net/appgrid/stable/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/gambas-team-ubuntu-gambas3-xenial.list
deb http://ppa.launchpad.net/gambas-team/gambas3/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/ubuntu-wine-ubuntu-ppa-xenial.list
deb http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu xenial main
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 8.3% command: firefox pid: 4677 mem: 277.11MB (3.5%)
2: cpu: 5.0% command: nautilus pid: 1731 mem: 122.68MB (1.5%)
3: cpu: 3.5% command: thunderbird pid: 4214 mem: 269.67MB (3.4%)
4: cpu: 2.6% command: Xorg pid: 998 mem: 89.48MB (1.1%)
5: cpu: 2.5% command: compiz pid: 1780 mem: 100.30MB (1.2%)
6: cpu: 0.6% command: gnome-terminal-server pid: 4787 mem: 37.43MB (0.4%)
7: cpu: 0.4% command: hud-service pid: 1575 mem: 47.98MB (0.6%)
8: cpu: 0.3% command: bash pid: 7194 mem: 4.36MB (0.0%)
9: cpu: 0.3% command: gnome-software pid: 1736 mem: 112.42MB (1.4%)
10: cpu: 0.2% command: unity-panel-service pid: 1612 mem: 33.78MB (0.4%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 277.11MB (3.5%) command: firefox pid: 4677 cpu: 8.3%
2: mem: 269.67MB (3.4%) command: thunderbird pid: 4214 cpu: 3.5%
3: mem: 122.68MB (1.5%) command: nautilus pid: 1731 cpu: 5.0%
4: mem: 112.42MB (1.4%) command: gnome-software pid: 1736 cpu: 0.3%
5: mem: 100.30MB (1.2%) command: compiz pid: 1780 cpu: 2.5%
6: mem: 89.48MB (1.1%) command: Xorg pid: 998 cpu: 2.6%
7: mem: 61.11MB (0.7%) command: evolution-calendar-factory pid: 1812 cpu: 0.0%
8: mem: 52.54MB (0.6%) command: evolution-calendar-factory-subprocess pid: 1855 cpu: 0.0%
9: mem: 49.64MB (0.6%) command: evolution-calendar-factory-subprocess pid: 1869 cpu: 0.0%
10: mem: 47.98MB (0.6%) command: hud-service pid: 1575 cpu: 0.4%
Info: Processes: 229 Uptime: 30 min Memory: 1268.0/7858.9MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 000B
Timeout: 0 seconds
BootOrder: 000B,0004,0006,0003,0007,0008,0009,000A
Boot0000 Setup FvFile(721c8b66-426c-4e86-8e99-3457c46ab0b9)
Boot0001 Boot Menu FvFile(86488440-41bb-42c7-93ac-450fbf7766bf)
Boot0002 Recovery FvFile(ab4579c4-3bc5-4489-a88e-0f21e6cebf85)
Boot0003* SATA HDD: VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,91af625956449f41a7b91f4f892ab0f600)
Boot0004* SATA CD: VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,aea2090adfde214e8b3a5e471856a354)
Boot0005* CD-ROM: VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,be9d0102e211f3489efa0b983c96839b)
Boot0006* USB CD: VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,86701296aa5a7848b66cd49dd3ba6a55)
Boot0007* USB FDD: VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,6ff015a28830b543a8b8641009461e49)
Boot0008* USB HDD: VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,33e821aaaf33bc4789bd419f88c50803)
Boot0009* NETWORK: VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,78a84aaf2b2afc4ea79cf5cc8f3d3803)
Boot000A* Windows Boot Manager HD(2,GPT,82a098a5-769c-4ec0-966f-2207e635194b,0xfa000,0x96000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...o................
Boot000B* ubuntu HD(1,GPT,7d19d9f2-4cca-47d8-acc3-9f2cb223daf1,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)
vfat partition details:
/dev/sda1: UUID="57BE-F1D2" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="7d19d9f2-4cca-47d8-acc3-9f2cb223daf1"
__________________________________ Secure Boot ________________________________
Secure Boot active
__________________________________ OS prober ________________________________
None
_____________________________ md5sum of EFI files _____________________________
EFI files in /dev/sda1:
34a5c2687e10f4cad35391d68ff32a6c /EFI/ubuntu/grubx64.efi
3aef9c72ad50faa8db576c01f85a0915 /EFI/ubuntu/shimx64.efi
61c7898dd613614b15cee0081226572c /EFI/ubuntu/fbx64.efi
bf39cf9416a9403d40a9b69541486e74 /EFI/ubuntu/mmx64.efi
d73bbea8b6c047d2a706472f87d3ccdb /EFI/ubuntu/fwupx64.efi
========================= Boot Information Details ============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi /EFI/ubuntu/mmx64.efi
/EFI/ubuntu/fbx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disque /dev/sda : 698.7 GiB, 750156374016 octets, 1465149168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,465,149,167 1,465,149,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,448,624,127 1,447,573,504 Data partition (Linux)
/dev/sda3 1,448,624,128 1,465,147,391 16,523,264 Swap partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 57BE-F1D2 vfat
/dev/sda2 82f417d5-2749-48e9-9024-a113922280ff ext4
/dev/sda3 e25e1513-8c0f-469f-9eba-b926911389fb swap
/dev/zram0 09d2214f-9971-46e2-9d2a-6403bb52c222 swap
/dev/zram1 82edba44-76a3-4f62-b5c9-e3ea86bbcece swap
/dev/zram2 4673e19a-39d9-48b1-8b7a-89d8151cd366 swap
/dev/zram3 b655b8ae-4055-41c7-8190-cc4d48d76976 swap
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 mai 23 08:07 ata-SlimtypeDVD_A_DU8A5SH_A5903738ADD1N38L0D1P -> ../../sr0
lrwxrwxrwx 1 root root 9 mai 23 08:07 ata-ST750LM022_HN-M750MBB_S31XJ9ADA09763 -> ../../sda
lrwxrwxrwx 1 root root 10 mai 23 08:07 ata-ST750LM022_HN-M750MBB_S31XJ9ADA09763-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai 23 08:07 ata-ST750LM022_HN-M750MBB_S31XJ9ADA09763-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 23 08:07 ata-ST750LM022_HN-M750MBB_S31XJ9ADA09763-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 mai 23 08:07 wwn-0x50004cf20b9af952 -> ../../sda
lrwxrwxrwx 1 root root 10 mai 23 08:07 wwn-0x50004cf20b9af952-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai 23 08:07 wwn-0x50004cf20b9af952-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 23 08:07 wwn-0x50004cf20b9af952-part3 -> ../../sda3
_________________________ "ls -R /dev/mapper/" output _________________________
None
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda2 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
__________________________=== Boot Files Content ===___________________________
___________________________ sda2/boot/grub/grub.cfg: ___________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-82f417d5-2749-48e9-9024-a113922280ff' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 82f417d5-2749-48e9-9024-a113922280ff
else
search --no-floppy --fs-uuid --set=root 82f417d5-2749-48e9-9024-a113922280ff
fi
linux /boot/vmlinuz-4.8.0-52-generic.efi.signed root=UUID=82f417d5-2749-48e9-9024-a113922280ff ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-52-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda2/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=82f417d5-2749-48e9-9024-a113922280ff / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=57BE-F1D2 /boot/efi vfat umask=0077 0 1
# swap was on /dev/sda3 during installation
UUID=e25e1513-8c0f-469f-9eba-b926911389fb none swap sw 0 0
____________________________ sda2/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.8.0-52-generic.efi.signed root=UUID=82f417d5-2749-48e9-9024-a113922280ff ro quiet splash vt.handoff=7
______________________________ Boot-up Statistics ______________________________
Startup finished in 3ms (firmware) + 4ms (loader) + 3.487s (kernel) + 30.570s (userspace) = 34.065s
blame, first 10:
dev-sda2.device 12.384s
apparmor.service 9.374s
plymouth-read-write.service 9.095s
ModemManager.service 4.456s
NetworkManager.service 4.234s
accounts-daemon.service 4.166s
thermald.service 3.996s
plymouth-start.service 2.980s
grub-common.service 2.854s
systemd-udevd.service 2.788s
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @29.539s
2 multi-user.target @29.539s
3 getty.target @29.539s
4 getty@tty1.service @29.538s
5 rc-local.service @29.532s +968us
6 network.target @29.519s
7 NetworkManager.service @25.285s +4.234s
8 dbus.service @25.015s
9 basic.target @25.009s
10 sockets.target @25.009s
11 snapd.socket @24.954s +51ms
12 sysinit.target @24.925s
13 apparmor.service @15.550s +9.374s
14 local-fs.target @15.490s
15 boot-efi.mount @15.388s +100ms
16 systemd-fsck@dev-disk-by\x2duuid-57BE\x2dF1D2.service @14.468s +841ms
17 dev-disk-by\x2duuid-57BE\x2dF1D2.device @14.437s
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 7.7G 1.1G 4.4G 168M 2.2G 6.1G
Swap: 11G 0B 11G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/loop0 /snap/core/1689 squashfs 80M 80M 0 100% 100%
/dev/sda1 /boot/efi vfat 511M 3.5M 508M 1% -
/dev/sda2 / ext4 680G 331G 315G 52% 1%
Swap partition for hibernation : UUID=e25e1513-8c0f-469f-9eba-b926911389fb
_________________________________ USB devices __________________________________
Bus 002 Device 003: ID 045e:0083 Microsoft Corp. Basic Optical Mouse
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 2232:1041 Silicon Motion
Bus 001 Device 005: ID 0cf3:3004 Atheros Communications, Inc. AR3012 Bluetooth 4.0
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/3p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
|__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/3p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
|__ Port 3: Dev 5, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 3: Dev 5, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 4: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
_______________________________ Wireless Status _______________________________
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
___________________________________ Modules Loaded ____________________________
Module Size Used by
ahci 36864 3
arc4 16384 2
ath 32768 3 ath9k_hw,ath9k,ath9k_common
ath3k 20480 0
ath9k 147456 0
ath9k_common 36864 1 ath9k
ath9k_hw 475136 2 ath9k,ath9k_common
autofs4 40960 2
binfmt_misc 20480 1
bluetooth 557056 32 btrtl,btintel,bnep,btbcm,rfcomm,ath3k,btusb
bnep 20480 2
btbcm 16384 1 btusb
btintel 16384 1 btusb
btrfs 1060864 0
btrtl 16384 1 btusb
btusb 45056 0
ccm 20480 1
cfg80211 581632 4 mac80211,ath9k,ath,ath9k_common
coretemp 16384 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 24576 1 ghash_clmulni_intel
dell_smo8800 16384 0
drm 368640 5 i915,drm_kms_helper
drm_kms_helper 167936 1 i915
fb_sys_fops 16384 1 drm_kms_helper
fjes 28672 0
ghash_clmulni_intel 16384 0
hfs 57344 0
hfsplus 106496 0
hid 122880 2 hid_generic,usbhid
hid_generic 16384 0
i2c_algo_bit 16384 1 i915
i915 1314816 100
input_leds 16384 0
intel_cstate 16384 0
intel_powerclamp 16384 0
intel_rapl 20480 0
intel_rapl_perf 16384 0
irqbypass 16384 1 kvm
jfs 184320 0
joydev 20480 0
kvm 598016 1 kvm_intel
kvm_intel 192512 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
lpc_ich 24576 0
mac80211 761856 1 ath9k
mac_hid 16384 0
media 40960 2 uvcvideo,videodev
mei 102400 1 mei_me
mei_me 40960 0
mii 16384 1 r8169
minix 40960 0
msdos 20480 0
ntfs 102400 0
parport 49152 3 lp,parport_pc,ppdev
parport_pc 32768 0
ppdev 20480 0
psmouse 139264 0
qnx4 16384 0
r8169 81920 0
raid6_pq 102400 1 btrfs
rfcomm 77824 0
serio_raw 16384 0
shpchp 36864 0
snd 86016 17 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
snd_hda_codec 135168 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 45056 1
snd_hda_codec_realtek 86016 1
snd_hda_core 86016 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel 36864 3
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 110592 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
soundcore 16384 1 snd
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
uas 24576 0
ufs 73728 0
usbhid 53248 0
usb_storage 73728 1 uas
uvcvideo 90112 0
video 40960 1 i915
videobuf2_core 40960 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 24576 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 180224 3 uvcvideo,videobuf2_core,videobuf2_v4l2
wmi 16384 0
x86_pkg_temp_thermal 16384 0
xfs 1048576 0
xor 24576 1 btrfs
zram 24576 4
______________________________ Additional Drivers _____________________________
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_CH.UTF-8
LANGUAGE=fr_CH:fr
LC_CTYPE="fr_CH.UTF-8"
LC_NUMERIC="fr_CH.UTF-8"
LC_TIME="fr_CH.UTF-8"
LC_COLLATE="fr_CH.UTF-8"
LC_MONETARY="fr_CH.UTF-8"
LC_MESSAGES="fr_CH.UTF-8"
LC_PAPER="fr_CH.UTF-8"
LC_NAME="fr_CH.UTF-8"
LC_ADDRESS="fr_CH.UTF-8"
LC_TELEPHONE="fr_CH.UTF-8"
LC_MEASUREMENT="fr_CH.UTF-8"
LC_IDENTIFICATION="fr_CH.UTF-8"
LC_ALL=
/etc/default/locale:
# File generated by update-locale
LANG="fr_CH.UTF-8"
LANGUAGE="fr_CH:fr"
Active keyboard layout:
rules: evdev
model: pc105
layout: ch,us
variant: fr,
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="ch"
XKBVARIANT="fr"
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
apport 2.20.1-0ubuntu2.6 from:2.20.1-0ubuntu2.5
apport-gtk 2.20.1-0ubuntu2.6 from:2.20.1-0ubuntu2.5
libwhoopsie0 0.2.52.3 from:0.2.52.2
python3-apport 2.20.1-0ubuntu2.6 from:2.20.1-0ubuntu2.5
python3-problem-report 2.20.1-0ubuntu2.6 from:2.20.1-0ubuntu2.5
whoopsie 0.2.52.3 from:0.2.52.2
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
ca-certificates-java default-jre:i386 default-jre-headless:i386 enchant:i386
flightgear-data-ai flightgear-data-aircrafts flightgear-data-all
flightgear-data-base flightgear-data-models fonts-dejavu-extra freeglut3
glib-networking:i386 gstreamer1.0-plugins-base:i386
gstreamer1.0-plugins-good:i386 gstreamer1.0-x:i386 java-common kde-l10n-engb
kde-l10n-fr lame:i386 libaa1:i386 libaec0 libarmadillo6 libarpack2
libaspell15:i386 libatk1.0-0:i386 libavc1394-0:i386 libavdevice-ffmpeg56
libcaca0:i386 libcairo-gobject2:i386 libcairo2:i386 libcdparanoia0:i386
libcoin80v5 libdap17v5 libdapclient6v5 libdatrie1:i386 libdbus-glib-1-2:i386
libdv4:i386 libegl1-mesa:i386 libenchant1c2a:i386 libepsilon1 libfreexl1
libgbm1:i386 libgdal1i libgdk-pixbuf2.0-0:i386 libgeoclue0:i386
libgeos-3.5.0 libgeos-c1v5 libgif7:i386 libgraphicsmagick-q16-3
libgraphite2-3:i386 libgstreamer-plugins-base1.0-0:i386
libgstreamer-plugins-good1.0-0:i386 libgstreamer1.0-0:i386 libgtk2.0-0:i386
libgudev-1.0-0:i386 libharfbuzz-icu0:i386 libharfbuzz0b:i386 libhdf4-0-alt
libhdf5-10 libhtsengine1 libhunspell-1.3-0:i386 libiec61883-0:i386
libjavascriptcoregtk-1.0-0:i386 libjs-excanvas libjs-jquery-flot
libjs-leaflet libkmlbase1 libkmldom1 libkmlengine1 libminizip1
libmp3lame0:i386 libnetcdf11 libnspr4:i386 libnss3:i386 libogdi3.2
libopenjp2-7 libopenscenegraph100v5 libopenthreads20 libopus0:i386
libp11-kit-gnome-keyring:i386 libpango-1.0-0:i386 libpangocairo-1.0-0:i386
libpangoft2-1.0-0:i386 libpcsclite1:i386 libpixman-1-0:i386 libplib1
libproj9 libproxy1v5:i386 libraw1394-11:i386 libsecret-1-0:i386
libshout3:i386 libsimgearcore3.4.0v5 libsimgearscene3.4.0v5 libslang2:i386
libsoup2.4-1:i386 libspatialite7 libspeex1:i386 libsuperlu4 libsz2
libtag1v5:i386 libtag1v5-vanilla:i386 libthai0:i386 libtheora0:i386
liburiparser1 libvisual-0.4-0:i386 libwavpack1:i386 libwayland-client0:i386
libwayland-server0:i386 libwebkitgtk-1.0-0:i386 libwebp5:i386
libxcb-render0:i386 libxcb-shm0:i386 libxcb-xfixes0:i386 libxerces-c3.1
libxine2 libxine2-bin libxine2-doc libxine2-ffmpeg libxine2-misc-plugins
libxine2-plugins libxtst6:i386 libxv1:i386 openjdk-8-jre:i386
openjdk-8-jre-headless:i386 openjdk-9-jre-headless proj-bin proj-data
snap-confine wine-gecko2.21 wine-gecko2.21:i386 wine-mono0.0.8
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.
__________________ Configuration files of uninstalled packages: ________________
Package Version
appgrid 0.278
fgo 1.5.5-2
flightgear 3.4.0-3ubuntu1
wine1.6 1:1.6.2-0ubuntu14
Use the following command to clean old configuration files:
sudo apt purge appgrid fgo flightgear wine1.6
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic-hwe-16.04 4.8.0.52.23
linux-headers-4.8.0-36 4.8.0-36.36~16.04.1
linux-headers-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-headers-4.8.0-52 4.8.0-52.55~16.04.1
linux-headers-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-headers-generic-hwe-16.04 4.8.0.52.23
linux-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-image-extra-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-image-generic-hwe-16.04 4.8.0.52.23
linux-signed-generic-hwe-16.04 4.8.0.52.23
linux-signed-image-4.8.0-52-generic 4.8.0-52.55~16.04.1
linux-signed-image-generic-hwe-16.04 4.8.0.52.23
File list in /boot directory:
abi-4.8.0-36-generic
abi-4.8.0-52-generic
config-4.8.0-36-generic
config-4.8.0-52-generic
efi
grub
initrd.img-4.8.0-36-generic
initrd.img-4.8.0-52-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.8.0-36-generic
System.map-4.8.0-52-generic
vmlinuz-4.8.0-36-generic
vmlinuz-4.8.0-52-generic
vmlinuz-4.8.0-52-generic.efi.signed
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd.
[ 0.000000] efi: ACPI=0xdaffe000 ACPI 2.0=0xdaffe014 SMBIOS=0xdae8b000
[ 0.000000] ACPI: UEFI 0x00000000DAFE7000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 0x00000000DAFE6000 00003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DAFE5000 00022E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.235478] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.242406] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.268612] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.348241] SCSI subsystem initialized
[ 0.926751] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.927149] efifb: probing for efifb
[ 0.927158] efifb: framebuffer at 0xe0000000, using 4128k, total 4128k
[ 0.927159] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.927159] efifb: scrolling: redraw
[ 0.927160] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.927266] fb0: EFI VGA frame buffer device
[ 0.975303] EFI Variables Facility v0.08 2004-May-17
[ 0.983495] EFI: Loaded cert ': 3d5bb49f5d3b7b9741b5cf19e3a82ced' linked to '.builtin_trusted_keys'
[ 0.983513] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.builtin_trusted_keys'
[ 0.983527] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.builtin_trusted_keys'
[ 0.985307] EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.builtin_trusted_keys'
[ 1.075922] scsi host0: ahci
[ 1.076064] scsi host1: ahci
[ 1.076270] scsi host2: ahci
[ 1.076422] scsi host3: ahci
[ 1.076606] scsi host4: ahci
[ 1.076782] scsi host5: ahci
[ 1.087970] fb: switching to inteldrmfb from EFI VGA
[ 1.390506] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.390526] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.403682] scsi 0:0:0:0: Direct-Access ATA ST750LM022 HN-M7 0003 PQ: 0 ANSI: 5
[ 1.435540] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 1.435564] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.439923] scsi 2:0:0:0: CD-ROM Slimtype DVD A DU8A5SH NS21 PQ: 0 ANSI: 5
[ 1.473333] sr 2:0:0:0: [sr0] scsi3-mmc drive: 8x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.473516] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.473769] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.504721] sd 0:0:0:0: [sda] Attached SCSI disk
[ 10.464267] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 11.564177] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160422/utaddress-255)
[ 11.564185] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
[ 11.564187] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
[ 11.564190] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
[ 20.283856] usb 1-1.3: device descriptor read/64, error -110
[ 28.310380] audit: type=1400 audit(1495519669.803:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/1689/usr/lib/snapd/snap-confine" pid=712 comm="apparmor_parser"
[ 28.310388] audit: type=1400 audit(1495519669.803:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/1689/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=712 comm="apparmor_parser"
[ 28.312051] audit: type=1400 audit(1495519669.807:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=710 comm="apparmor_parser"
[ 28.312057] audit: type=1400 audit(1495519669.807:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=710 comm="apparmor_parser"
[ 28.313880] audit: type=1400 audit(1495519669.807:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=711 comm="apparmor_parser"
[ 28.313888] audit: type=1400 audit(1495519669.807:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=711 comm="apparmor_parser"
[ 28.313893] audit: type=1400 audit(1495519669.807:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=711 comm="apparmor_parser"
[ 28.313897] audit: type=1400 audit(1495519669.807:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=711 comm="apparmor_parser"
[ 28.313926] audit: type=1400 audit(1495519669.807:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=716 comm="apparmor_parser"
[ 28.313932] audit: type=1400 audit(1495519669.807:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=716 comm="apparmor_parser"
[ 35.926465] audit: type=1400 audit(1495519677.419:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/1689/usr/lib/snapd/snap-confine" pid=1048 comm="apparmor_parser"
[ 35.944544] audit: type=1400 audit(1495519677.439:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/1689/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1048 comm="apparmor_parser"
[ 35.976880] audit: type=1400 audit(1495519677.471:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=1050 comm="apparmor_parser"
[ 37.708641] wlp1s0: RX AssocResp from a8:d3:f7:26:26:9e (capab=0x1411 status=0 aid=3)
[ 194.873809] wlp1s0: RX AssocResp from a8:d3:f7:26:26:9e (capab=0x1411 status=0 aid=3)
[ 234.871659] wlp1s0: RX AssocResp from a8:d3:f7:26:26:9e (capab=0x1411 status=0 aid=3)
[ 330.290661] scsi host6: usb-storage 2-1.2:1.0
[ 331.303027] scsi 6:0:0:0: Direct-Access WD Elements 1078 1056 PQ: 0 ANSI: 6
[ 331.304521] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 334.375132] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[ 334.573525] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 404.950987] wlp1s0: RX AssocResp from a8:d3:f7:26:26:9e (capab=0x1411 status=0 aid=3)
[ 746.492201] scsi host6: usb-storage 2-1.2:1.0
[ 747.508158] scsi 6:0:0:0: Direct-Access WD Elements 1078 1056 PQ: 0 ANSI: 6
[ 747.508977] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 750.580423] sd 6:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[ 750.782518] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 1712.942977] wlp1s0: RX AssocResp from a8:d3:f7:26:26:9e (capab=0x1411 status=0 aid=3)
[ 1740.928697] wlp1s0: RX AssocResp from a8:d3:f7:26:26:9e (capab=0x1411 status=0 aid=3)
[ 1751.942502] wlp1s0: RX AssocResp from a8:d3:f7:26:26:9e (capab=0x1411 status=0 aid=3)
[ 1756.939345] wlp1s0: RX AssocResp from a8:d3:f7:26:26:9e (capab=0x1411 status=0 aid=3)
[ 1764.947879] wlp1s0: RX AssocResp from a8:d3:f7:26:26:9e (capab=0x1411 status=0 aid=3)
[ 1771.942026] wlp1s0: RX AssocResp from a8:d3:f7:26:26:9e (capab=0x1411 status=0 aid=3)
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Microsoft Basic Optical Mouse id=10 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ WebCam SC-10HDD12636N id=9 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
xrandr:
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS-1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 60.07*+
1360x768 59.80 59.96
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
960x600 60.00
960x540 59.99
800x600 60.00 60.32 56.25
840x525 60.01 59.88
800x512 60.17
700x525 59.98
640x512 60.02
720x450 59.89
640x480 60.00 59.94
680x384 59.80 59.96
576x432 60.06
512x384 60.00
400x300 60.32 56.34
320x240 60.05
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 33.955] (==) No Layout section. Using the first Screen section.
[ 33.955] (==) No screen section available. Using defaults.
[ 33.955] (**) |-->Screen "Default Screen Section" (0)
[ 33.955] (**) | |-->Monitor "<default monitor>"
[ 33.967] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 33.995] (--) PCI:*(0:0:2:0) 8086:0166:144d:c736 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[ 33.995] (II) LoadModule: "glx"
[ 34.101] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 35.436] (II) LoadModule: "modesetting"
[ 35.436] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 35.436] (II) LoadModule: "fbdev"
[ 35.436] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 35.436] (II) LoadModule: "vesa"
[ 35.436] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 35.446] (WW) Falling back to old probe method for fbdev
[ 35.446] (II) Loading sub module "fbdevhw"
[ 35.446] (II) LoadModule: "fbdevhw"
[ 35.446] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 35.446] (WW) Falling back to old probe method for vesa
[ 35.446] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 35.446] (II) Loading sub module "glamoregl"
[ 35.446] (II) LoadModule: "glamoregl"
[ 35.446] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 37.138] (II) modeset(0): Output LVDS-1 has no monitor section
[ 37.139] (II) modeset(0): Output VGA-1 has no monitor section
[ 37.139] (II) modeset(0): Output HDMI-1 has no monitor section
[ 37.140] (II) modeset(0): Output DP-1 has no monitor section
[ 37.142] (II) Loading sub module "fb"
[ 37.142] (II) LoadModule: "fb"
[ 37.142] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 37.159] (II) UnloadModule: "fbdev"
[ 37.159] (II) UnloadModule: "vesa"
[ 37.439] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 37.482] (II) modeset(0): Setting screen physical size to 361 x 203
[ 37.572] (II) LoadModule: "evdev"
[ 37.572] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 37.678] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[ 37.678] (II) LoadModule: "synaptics"
[ 37.678] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-52-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-52-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:166
BusID "PCI:0@0:2:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
card0-LVDS-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
Single card detected
Nothing to do
No change - nothing to do
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-52-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST750LM022 HN-M750MBB
LU WWN Device Id: 5 0004cf 20b9af952
Firmware Version: 2AR20003
User Capacity: 750'156'374'016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue May 23 08:37:51 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 17
2 Throughput_Performance -OS--K 252 252 000 - 0
3 Spin_Up_Time PO---K 089 088 025 - 3464
4 Start_Stop_Count -O--CK 097 097 000 - 3657
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
7 Seek_Error_Rate -OSR-K 252 252 051 - 0
8 Seek_Time_Performance --S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 4525
10 Spin_Retry_Count -O--CK 252 252 051 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 124
12 Power_Cycle_Count -O--CK 097 097 000 - 3632
191 G-Sense_Error_Rate -O---K 100 100 000 - 686
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
194 Temperature_Celsius -O---- 064 048 000 - 36 (Min/Max 8/52)
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--CK 252 252 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 1
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 1277
223 Load_Retry_Count -O--CK 100 100 000 - 124
225 Load_Cycle_Count -O--CK 090 090 000 - 107363
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors LoggedEt là je bloque 
Intel i5 + 4 Go de RAL + graphiques Intel... Tout devrait bien rouler normalement 
Avis aux experts.
Hors ligne
#6 Le 23/05/2017, à 09:38
- QLSVB
Re : Ubuntu 16.04 vidéo saccade
@tarkan99: Hello, de manière générale j'ai toujours fait attention car je suis conscient de la fragilité. Cependant je ne suis pas le seul à utiliser ce portable et je ne peux pas exclure qu'il ait une fois été posé un peu brusquement...
Concernant la sauvegarde des données, j'ai régulièrement copié tout ce que j'ai d'important sur un disque dur externe et vais dès lors m'assurer que cela continue! Quoi qu'il en soit merci de m'y avoir rendu attentif!
@Caribou22: Ok, quoi qu'il en soit merci pour ta démarche. Je suis allé faire un tour sur le premier lien de ta signature, vraiment super comme article. Je vais testé ça dès que j'aurais le temps!!
Hors ligne
#7 Le 23/05/2017, à 11:25
- tarkan99
Re : Ubuntu 16.04 vidéo saccade
toujours en attendant l'avis d'un expert SMART, je conseille de surveiller les données SMART régulièrement.
Pas besoin de faire un bisnext à chaque fois.
l'outil smart est maintenant installé.
Quand le problème de saccade apparait, peux-tu faire :
sudo smartctl -a /dev/sdaet fournir ici le compte rendu (en utilisant les balises code <>)
ainsi de
free -h
topDernière modification par tarkan99 (Le 23/05/2017, à 11:46)
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#8 Le 23/05/2017, à 11:44
- lepetit
Re : Ubuntu 16.04 vidéo saccade
les disque dur sur laptop c'est la plaie, ya pas besoin de le poser brusquemment pour le flinguer
il suffit qu'il ne soit pas dans une position "droite" (genre sur tes genoux dans le canapé) pour qu'il y'est un risque a flinguer a terme le disque dur.
avec un ssd tu n'as pas ce problème.
-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10
Hors ligne
#9 Le 23/05/2017, à 11:47
- tarkan99
Re : Ubuntu 16.04 vidéo saccade
@QLSVB : le PC est-il utilisé dans les transports en commun ?
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#10 Le 23/05/2017, à 13:42
- Laurent85
Re : Ubuntu 16.04 vidéo saccade
Bonjour, donne le retour de cette commande quand ça saccade, copie colle dans le terminal :
wget https://github.com/smxi/inxi/raw/master/inxi --quiet --output-document /run/shm/inxi && bash /run/shm/inxi -c0 -tcm20Dernière modification par Laurent85 (Le 23/05/2017, à 13:46)
Hors ligne
#11 Le 23/05/2017, à 14:21
- QLSVB
Re : Ubuntu 16.04 vidéo saccade
@Tarkan99 et Laurent85, je vais tacher de faire ces deux entrées la prochaine fois que je regarde un film et que ça saccade puis je mettrais le résultat ici. Je n'ai pas le temps d'en regarder un aujourd'hui mais dès que l'occasion se donne je reviens à vous. Sinon pour répondre à la question de Tarkan99, le PC reste à la maison mais il vadrouille facilement du bureau au canapé et même au lit...
@lepetit: Je savais pas qu'il pouvait même être sensible à l'inclinaison... Un ssd est un disque dur flash? Si oui c'est bien dans cette direction que je souhaitais m'orienter lors du prochain achat...
Petite remarque rien à voir: Je trouve vraiment beau le nombre de personnes comme vous qui sont prêt à donner de leur temps pour aider les autres. Merci!
Hors ligne
#12 Le 29/05/2017, à 08:21
- QLSVB
Re : Ubuntu 16.04 vidéo saccade
Bonjour à tous
Comme je l'avais mis dans mon poste #3, j'ai effectué "l'installation" de Zram. Dès lors j'ai eu la possibilité de regarder un film en ligne et un déjà enregistré sur le disque dur et je n'ai plus eu de problème de saccade. De plus il me semble qu'il chauffe moins.
Cela dit j'ai un peu soucis que ce ne soit qu'un pansement sur une blessure, un moyen de contourner le vrai problème... (Puisque au regard du hardware il ne devrait pas y avoir ce soucis). Mais bon, je ne veux pas trop perdre de temps avec ça et encore moins en faire perdre puisqu'à présent ça fonctionne.
Encore merci et excellente journée.
Hors ligne