Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 28/05/2017, à 12:53

Frost69

Webcam intégré non reconnu par "Skype" & "Cheese"

Bonjour wink ;

Je possède un "ASUS K75VM" sur le quel je vient d’installer "Ubuntu 16.04 LTS (64 Bits)".
Tout marche parfaitement sauf la webcam qui n'est ni reconnu par "Skype" ni par "Cheese".
J'ai acheté ce PC car il avait justement une webcam intégré hmm donc toute solution est la bienvenu.

Linuxement.


Asus-G74Sx
SSD Sandsik 1 Tera
Ubuntu 20.04.1 LTS

Hors ligne

#2 Le 28/05/2017, à 13:07

abelthorne

Re : Webcam intégré non reconnu par "Skype" & "Cheese"

Première chose à vérifier : est-ce que la webcam est listée par lspci ou lsusb ?

Hors ligne

#3 Le 28/05/2017, à 13:21

Frost69

Re : Webcam intégré non reconnu par "Skype" & "Cheese"

Bonjour abelthorne

Je ne parvient pas bien a déchiffrer les résultat obtenu par lspci et lsusb je poste donc ce que ca m'affiche :

Commande lspci :

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)
03:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)


Commande lsusb :

Bus 002 Device 004: ID 15d9:0a4d Trust International B.V. Optical Mouse
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 13d3:3362 IMC Networks Atheros AR3012 Bluetooth 4.0 Adapter
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

la voit tu quelle que part ??

Merci.


Asus-G74Sx
SSD Sandsik 1 Tera
Ubuntu 20.04.1 LTS

Hors ligne

#4 Le 28/05/2017, à 13:30

abelthorne

Re : Webcam intégré non reconnu par "Skype" & "Cheese"

À première vue, je n'ai pas l'impression qu'il y ait de webcam dans la liste... Ça se complique. Tu es sûr qu'elle fonctionne (par exemple sur un Windows qui aurait été installé sur ce PC avant) ?

Hors ligne

#5 Le 28/05/2017, à 14:05

Frost69

Re : Webcam intégré non reconnu par "Skype" & "Cheese"

oui elle fonctionnait bien avant sous win 7


Asus-G74Sx
SSD Sandsik 1 Tera
Ubuntu 20.04.1 LTS

Hors ligne

#6 Le 28/05/2017, à 14:14

abelthorne

Re : Webcam intégré non reconnu par "Skype" & "Cheese"

Est-ce que par hasard il n'y aurait pas un bouton sur le PC (ou une combinaison de touches avec Fn et une qui montre un picto de caméra / appareil photo − on en voit deux exemples ) pour l'activer ?

Essaie aussi ces deux commandes pour vérifier le matos détecté :

sudo lshw
inxi -Fx

Dernière modification par abelthorne (Le 28/05/2017, à 14:16)

Hors ligne

#7 Le 28/05/2017, à 14:25

Frost69

Re : Webcam intégré non reconnu par "Skype" & "Cheese"

j'ai bien une touche avec un appareille photo (sur la touche "v") mais quand je fais "fn" plus la touche en question ca ne m'active pas la cam roll


Asus-G74Sx
SSD Sandsik 1 Tera
Ubuntu 20.04.1 LTS

Hors ligne

#8 Le 28/05/2017, à 14:30

xubu1957

Re : Webcam intégré non reconnu par "Skype" & "Cheese"

Bonjour,

Essaies avec : guvcview

sudo apt-get install guvcview

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#9 Le 28/05/2017, à 14:39

Frost69

Re : Webcam intégré non reconnu par "Skype" & "Cheese"

Salut xubu1957;

Avec "guvcview" j’obtiens le message "guvcview error no video device found".


Asus-G74Sx
SSD Sandsik 1 Tera
Ubuntu 20.04.1 LTS

Hors ligne

#10 Le 28/05/2017, à 14:52

xubu1957

Re : Webcam intégré non reconnu par "Skype" & "Cheese"


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#11 Le 28/05/2017, à 15:03

abelthorne

Re : Webcam intégré non reconnu par "Skype" & "Cheese"

Tu peux donner le retour des deux commandes que j'avais rajoutées dans mon message #6 ?

Et quand tu appuies sur la combinaison de touches pour la cam, est-ce qu'il y a du changement dans dmesg ou lsusb ?

EDIT : après une petite recherche, la combinaison Fn+v sur ton portable sert apparemment de raccourci vers une appli qui gère la cam (sur Windows), ça ne sert pas vraiment à l'activer.

Dernière modification par abelthorne (Le 28/05/2017, à 15:06)

Hors ligne

#12 Le 28/05/2017, à 15:49

Frost69

Re : Webcam intégré non reconnu par "Skype" & "Cheese"

@xubu1957

xubu1957 a écrit :

Tu avais redémarré l'ordi ?

oui ça a été fait.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

@abelthorne

abelthorne a écrit :

Tu peux donner le retour des deux commandes que j'avais rajoutées dans mon message #6

Voici;

Commande sudo lshw :

asus-k75vm                
    description: Ordinateur Bloc -notes
    produit: K75VM
    fabriquant: ASUSTeK COMPUTER INC.
    version: 1.0
    numéro de série: C4N0CJ559994142
    bits: 64 bits
    fonctionnalités: smbios-2.7 dmi-2.7 vsyscall32
    configuration: boot=normal chassis=notebook family=K uuid=64515149-76F3-11E1-921F-10BF4846C8AF
  *-core
       description: Carte mère
       produit: K75VM
       fabriquant: ASUSTeK COMPUTER INC.
       identifiant matériel: 0
       version: 1.0
       numéro de série: C4N0CJ559994142
       emplacement: To be filled by O.E.M.
     *-firmware
          description: BIOS
          fabriquant: American Megatrends Inc.
          identifiant matériel: 0
          version: 208
          date: 03/14/2012
          taille: 64KiB
          capacité: 4032KiB
          fonctionnalités: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
     *-cache:0
          description: L2 cache
          identifiant matériel: 3d
          emplacement: CPU Internal L2
          taille: 1MiB
          capacité: 1MiB
          fonctionnalités: internal write-through instruction
          configuration: level=2
     *-cache:1
          description: L1 cache
          identifiant matériel: 3e
          emplacement: CPU Internal L1
          taille: 256KiB
          capacité: 256KiB
          fonctionnalités: internal write-through
          configuration: level=1
     *-cache:2
          description: L3 cache
          identifiant matériel: 3f
          emplacement: CPU Internal L3
          taille: 6MiB
          capacité: 6MiB
          fonctionnalités: internal write-back instruction
          configuration: level=3
     *-memory
          description: Mémoire Système
          identifiant matériel: 40
          emplacement: Carte mère
          taille: 4GiB
        *-bank:0
             description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2016-06-24 06:52+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2016-06-27 17:08+0000X-Generator: Launchpad (build 18115) [vide]
             produit: [Empty]
             fabriquant: [Empty]
             identifiant matériel: 0
             numéro de série: [Empty]
             emplacement: ChannelA-DIMM0
        *-bank:1
             description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2016-06-24 06:52+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2016-06-27 17:08+0000X-Generator: Launchpad (build 18115) [vide]
             produit: [Empty]
             fabriquant: [Empty]
             identifiant matériel: 1
             numéro de série: [Empty]
             emplacement: ChannelA-DIMM1
        *-bank:2
             description: SODIMM DDR3 Synchrone 1333 MHz (0,8 ns)
             produit: CMSO4GX3M1A1333C9
             fabriquant: AMI
             identifiant matériel: 2
             numéro de série: 03000000
             emplacement: ChannelB-DIMM0
             taille: 4GiB
             bits: 64 bits
             horloge: 1333MHz (0.8ns)
        *-bank:3
             description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2016-06-24 06:52+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2016-06-27 17:08+0000X-Generator: Launchpad (build 18115) [vide]
             produit: [Empty]
             fabriquant: [Empty]
             identifiant matériel: 3
             numéro de série: [Empty]
             emplacement: ChannelB-DIMM1
     *-cpu
          description: CPU
          produit: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
          fabriquant: Intel Corp.
          identifiant matériel: 41
          information bus: cpu@0
          version: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
          emplacement: SOCKET 0
          taille: 3143MHz
          capacité: 3800MHz
          bits: 64 bits
          horloge: 100MHz
          fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm epb tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms xsaveopt dtherm ida arat pln pts cpufreq
          configuration: cores=4 enabledcores=4 threads=8
     *-pci
          description: Host bridge
          produit: 3rd Gen Core processor DRAM Controller
          fabriquant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 09
          bits: 32 bits
          horloge: 33MHz
          configuration: driver=ivb_uncore
          ressources: irq:0
        *-pci:0
             description: PCI bridge
             produit: Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port
             fabriquant: Intel Corporation
             identifiant matériel: 1
             information bus: pci@0000:00:01.0
             version: 09
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm msi pciexpress normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:24 portE/S:e000(taille=4096) mémoire:f6000000-f70fffff portE/S:e0000000(taille=301989888)
           *-display
                description: VGA compatible controller
                produit: GF108M [GeForce GT 630M]
                fabriquant: NVIDIA Corporation
                identifiant matériel: 0
                information bus: pci@0000:01:00.0
                version: a1
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
                configuration: driver=nouveau latency=0
                ressources: irq:30 mémoire:f6000000-f6ffffff mémoire:e0000000-efffffff mémoire:f0000000-f1ffffff portE/S:e000(taille=128) mémoire:f7000000-f707ffff
        *-display
             description: VGA compatible controller
             produit: 3rd Gen Core processor Graphics Controller
             fabriquant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 09
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             ressources: irq:31 mémoire:f7400000-f77fffff mémoire:d0000000-dfffffff portE/S:f000(taille=64)
        *-usb:0
             description: USB controller
             produit: 7 Series/C210 Series Chipset Family USB xHCI Host Controller
             fabriquant: Intel Corporation
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 04
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi xhci bus_master cap_list
             configuration: driver=xhci_hcd latency=0
             ressources: irq:27 mémoire:f7900000-f790ffff
           *-usbhost:0
                produit: xHCI Host Controller
                fabriquant: Linux 4.4.0-78-generic xhci-hcd
                identifiant matériel: 0
                information bus: usb@4
                nom logique: usb4
                version: 4.04
                fonctionnalités: usb-3.00
                configuration: driver=hub slots=4 speed=5000Mbit/s
           *-usbhost:1
                produit: xHCI Host Controller
                fabriquant: Linux 4.4.0-78-generic xhci-hcd
                identifiant matériel: 1
                information bus: usb@3
                nom logique: usb3
                version: 4.04
                fonctionnalités: usb-2.00
                configuration: driver=hub slots=4 speed=480Mbit/s
        *-communication
             description: Communication controller
             produit: 7 Series/C210 Series Chipset Family MEI Controller #1
             fabriquant: Intel Corporation
             identifiant matériel: 16
             information bus: pci@0000:00:16.0
             version: 04
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration: driver=mei_me latency=0
             ressources: irq:32 mémoire:f791a000-f791a00f
        *-usb:1
             description: USB controller
             produit: 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2
             fabriquant: Intel Corporation
             identifiant matériel: 1a
             information bus: pci@0000:00:1a.0
             version: 04
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             ressources: irq:16 mémoire:f7918000-f79183ff
           *-usbhost
                produit: EHCI Host Controller
                fabriquant: Linux 4.4.0-78-generic ehci_hcd
                identifiant matériel: 1
                information bus: usb@1
                nom logique: usb1
                version: 4.04
                fonctionnalités: usb-2.00
                configuration: driver=hub slots=2 speed=480Mbit/s
              *-usb
                   description: Concentrateur USB
                   produit: Integrated Rate Matching Hub
                   fabriquant: Intel Corp.
                   identifiant matériel: 1
                   information bus: usb@1:1
                   version: 0.00
                   fonctionnalités: usb-2.00
                   configuration: driver=hub slots=6 speed=480Mbit/s
                 *-usb
                      description: Interface sans fil Bluetooth
                      produit: Bluetooth USB Host Controller
                      fabriquant: Atheros Communications
                      identifiant matériel: 3
                      information bus: usb@1:1.3
                      version: 0.02
                      numéro de série: Alaska Day 2006
                      fonctionnalités: bluetooth usb-1.10
                      configuration: driver=btusb maxpower=100mA speed=12Mbit/s
        *-multimedia
             description: Audio device
             produit: 7 Series/C210 Series Chipset Family High Definition Audio Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1b
             information bus: pci@0000:00:1b.0
             version: 04
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi pciexpress bus_master cap_list
             configuration: driver=snd_hda_intel latency=0
             ressources: irq:33 mémoire:f7910000-f7913fff
        *-pci:1
             description: PCI bridge
             produit: 7 Series/C210 Series Chipset Family PCI Express Root Port 1
             fabriquant: Intel Corporation
             identifiant matériel: 1c
             information bus: pci@0000:00:1c.0
             version: c4
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:25 portE/S:d000(taille=4096) portE/S:f2100000(taille=1048576)
           *-network
                description: Ethernet interface
                produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                fabriquant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0
                information bus: pci@0000:02:00.0
                nom logique: enp2s0
                version: 07
                numéro de série: 10:bf:48:46:c8:af
                taille: 10Mbit/s
                capacité: 1Gbit/s
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
                ressources: irq:28 portE/S:d000(taille=256) mémoire:f2104000-f2104fff mémoire:f2100000-f2103fff
        *-pci:2
             description: PCI bridge
             produit: 7 Series/C210 Series Chipset Family PCI Express Root Port 2
             fabriquant: Intel Corporation
             identifiant matériel: 1c.1
             information bus: pci@0000:00:1c.1
             version: c4
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:26 mémoire:f7800000-f78fffff
           *-network
                description: Interface réseau sans fil
                produit: AR9485 Wireless Network Adapter
                fabriquant: Qualcomm Atheros
                identifiant matériel: 0
                information bus: pci@0000:03:00.0
                nom logique: wlp3s0
                version: 01
                numéro de série: 00:08:ca:85:6e:d3
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress bus_master cap_list rom ethernet physical wireless
                configuration: broadcast=yes driver=ath9k driverversion=4.4.0-78-generic firmware=N/A ip=192.168.0.20 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
                ressources: irq:17 mémoire:f7800000-f787ffff mémoire:f7880000-f788ffff
        *-usb:2
             description: USB controller
             produit: 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1
             fabriquant: Intel Corporation
             identifiant matériel: 1d
             information bus: pci@0000:00:1d.0
             version: 04
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             ressources: irq:23 mémoire:f7917000-f79173ff
           *-usbhost
                produit: EHCI Host Controller
                fabriquant: Linux 4.4.0-78-generic ehci_hcd
                identifiant matériel: 1
                information bus: usb@2
                nom logique: usb2
                version: 4.04
                fonctionnalités: usb-2.00
                configuration: driver=hub slots=2 speed=480Mbit/s
              *-usb
                   description: Concentrateur USB
                   produit: Integrated Rate Matching Hub
                   fabriquant: Intel Corp.
                   identifiant matériel: 1
                   information bus: usb@2:1
                   version: 0.00
                   fonctionnalités: usb-2.00
                   configuration: driver=hub slots=6 speed=480Mbit/s
                 *-usb
                      description: Souris
                      produit: USB OPTICAL MOUSE
                      fabriquant: Trust International B.V.
                      identifiant matériel: 6
                      information bus: usb@2:1.6
                      version: 1.00
                      fonctionnalités: usb-1.10
                      configuration: driver=usbhid maxpower=100mA speed=1Mbit/s
        *-isa
             description: ISA bridge
             produit: HM76 Express Chipset LPC Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1f
             information bus: pci@0000:00:1f.0
             version: 04
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: isa bus_master cap_list
             configuration: driver=lpc_ich latency=0
             ressources: irq:0
        *-storage
             description: SATA controller
             produit: 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
             fabriquant: Intel Corporation
             identifiant matériel: 1f.2
             information bus: pci@0000:00:1f.2
             version: 04
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: storage msi pm ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             ressources: irq:29 portE/S:f0b0(taille=8) portE/S:f0a0(taille=4) portE/S:f090(taille=8) portE/S:f080(taille=4) portE/S:f060(taille=32) mémoire:f7916000-f79167ff
        *-serial NON-RÉCLAMÉ
             description: SMBus
             produit: 7 Series/C210 Series Chipset Family SMBus Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1f.3
             information bus: pci@0000:00:1f.3
             version: 04
             bits: 64 bits
             horloge: 33MHz
             configuration: latency=0
             ressources: mémoire:f7915000-f79150ff portE/S:f040(taille=32)
     *-scsi:0
          identifiant matériel: 1
          nom logique: scsi0
          fonctionnalités: emulated
        *-disk
             description: ATA Disk
             produit: WDC WD7500BPKT-2
             fabriquant: Western Digital
             identifiant matériel: 0.0.0
             information bus: scsi@0:0.0.0
             nom logique: /dev/sda
             version: 1A01
             numéro de série: WD-WX71A92J4325
             taille: 698GiB (750GB)
             fonctionnalités: partitioned partitioned:dos
             configuration: ansiversion=5 logicalsectorsize=512 sectorsize=4096 signature=ad00e400
           *-volume:0
                description: Volume EXT4
                fabriquant: Linux
                identifiant matériel: 1
                information bus: scsi@0:0.0.0,1
                nom logique: /dev/sda1
                nom logique: /
                version: 1.0
                numéro de série: 4d655d06-d6f8-4caf-8f01-0bbc85b4da92
                taille: 694GiB
                capacité: 694GiB
                fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
                configuration: created=2017-05-28 02:15:01 filesystem=ext4 lastmountpoint=/ modified=2017-05-28 14:48:03 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2017-05-28 13:43:32 state=mounted
           *-volume:1
                description: Extended partition
                identifiant matériel: 2
                information bus: scsi@0:0.0.0,2
                nom logique: /dev/sda2
                taille: 3980MiB
                capacité: 3980MiB
                fonctionnalités: primary extended partitioned partitioned:extended
              *-logicalvolume
                   description: Linux swap / Solaris partition
                   identifiant matériel: 5
                   nom logique: /dev/sda5
                   capacité: 3980MiB
                   fonctionnalités: nofs
     *-scsi:1
          identifiant matériel: 2
          nom logique: scsi2
          fonctionnalités: emulated
        *-cdrom
             description: DVD-RAM writer
             produit: DVD-RAM UJ8B0
             fabriquant: MATSHITA
             identifiant matériel: 0.0.0
             information bus: scsi@2:0.0.0
             nom logique: /dev/cdrom
             nom logique: /dev/cdrw
             nom logique: /dev/dvd
             nom logique: /dev/dvdrw
             nom logique: /dev/sr0
             version: 1.00
             fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             configuration: ansiversion=5 status=nodisc
  *-power NON-RÉCLAMÉ
       description: To Be Filled By O.E.M.
       produit: To Be Filled By O.E.M.
       fabriquant: To Be Filled By O.E.M.
       identifiant matériel: 1
       version: To Be Filled By O.E.M.
       numéro de série: To Be Filled By O.E.M.
       capacité: 32768mWh

Commande inxi -Fx :

System:    Host: Asus-K75VM Kernel: 4.4.0-78-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: Unity 7.4.0 (Gtk 3.18.9-1ubuntu3.3) Distro: Ubuntu 16.04 xenial
Machine:   Mobo: ASUSTeK model: K75VM v: 1.0 Bios: American Megatrends v: 208 date: 03/14/2012
CPU:       Quad core Intel Core i7-3610QM (-HT-MCP-) cache: 6144 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 18359
           clock speeds: max: 3300 MHz 1: 1200 MHz 2: 1201 MHz 3: 1221 MHz 4: 1297 MHz 5: 1250 MHz 6: 2370 MHz
           7: 1246 MHz 8: 1201 MHz
Graphics:  Card-1: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0
           Card-2: NVIDIA GF108M [GeForce GT 630M] bus-ID: 01:00.0
           Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa) FAILED: nouveau
           Resolution: 1600x900@59.98hz, 1024x768@60.00hz
           GLX Renderer: Mesa DRI Intel Ivybridge Mobile GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
Audio:     Card Intel 7 Series/C210 Series Family High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture v: k4.4.0-78-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: d000 bus-ID: 02:00.0
           IF: enp2s0 state: down mac: 10:bf:48:46:c8:af
           Card-2: Qualcomm Atheros AR9485 Wireless Network Adapter driver: ath9k bus-ID: 03:00.0
           IF: wlp3s0 state: up mac: 00:08:ca:85:6e:d3
Drives:    HDD Total Size: 750.2GB (2.8% used) ID-1: /dev/sda model: WDC_WD7500BPKT size: 750.2GB temp: 39C
Partition: ID-1: / size: 684G used: 16G (3%) fs: ext4 dev: /dev/sda1
           ID-2: swap-1 size: 4.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 61.0C mobo: 27.8C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 239 Uptime: 43 min Memory: 913.1/3837.6MB Init: systemd runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481) inxi: 2.2.35 
abelthorne a écrit :

Et quand tu appuies sur la combinaison de touches pour la cam, est-ce qu'il y a du changement dans dmesg ou lsusb ?

Commande dmesg (sans l'appui sur la combinaison de touche) :

[    0.000000] microcode: CPU0 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-78-generic (buildd@lgw01-11) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #99-Ubuntu SMP Thu Apr 27 15:29:09 UTC 2017 (Ubuntu 4.4.0-78.99-generic 4.4.62)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-78-generic root=UUID=4d655d06-d6f8-4caf-8f01-0bbc85b4da92 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c8eabfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c8eac000-0x00000000c911afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c911b000-0x00000000c953bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c953c000-0x00000000c95c3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c95c4000-0x00000000c9843fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c9844000-0x00000000c9848fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000c9849000-0x00000000c988bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c988c000-0x00000000c9c89fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c9c8a000-0x00000000c9ff4fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c9ff5000-0x00000000c9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. K75VM/K75VM, BIOS 208 03/14/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x12fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 120000000 mask FF0000000 write-back
[    0.000000]   3 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   4 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   5 base 0CC000000 mask FFC000000 uncachable
[    0.000000]   6 base 0CB000000 mask FFF000000 uncachable
[    0.000000]   7 base 12FE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 4GB, range: 512MB, type WB
[    0.000000] reg 2, base: 4608MB, range: 256MB, type WB
[    0.000000] reg 3, base: 3584MB, range: 512MB, type UC
[    0.000000] reg 4, base: 3328MB, range: 256MB, type UC
[    0.000000] reg 5, base: 3264MB, range: 64MB, type UC
[    0.000000] reg 6, base: 3248MB, range: 16MB, type UC
[    0.000000] reg 7, base: 4862MB, range: 2MB, type UC
[    0.000000] total RAM covered: 4014M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 4M 	num_reg: 8  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 128MB, type WB
[    0.000000] reg 3, base: 3200MB, range: 32MB, type WB
[    0.000000] reg 4, base: 3232MB, range: 16MB, type WB
[    0.000000] reg 5, base: 4GB, range: 512MB, type WB
[    0.000000] reg 6, base: 4608MB, range: 256MB, type WB
[    0.000000] reg 7, base: 4862MB, range: 2MB, type UC
[    0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc20-0x000fcc2f] mapped at [ffff8800000fcc20]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
[    0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[    0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[    0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[    0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[    0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33754000-0x35ba1fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000C97DB080 00007C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000C97E91F8 0000F4 (v04 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000C97DB190 00E062 (v02 _ASUS_ Notebook 00000117 INTL 20091112)
[    0.000000] ACPI: FACS 0x00000000C9838F80 000040
[    0.000000] ACPI: APIC 0x00000000C97E92F0 000092 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000C97E9388 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000C97E93C8 0006E9 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[    0.000000] ACPI: HPET 0x00000000C97E9AB8 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000C97E9AF0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000C97E9E60 0008E4 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000C97EA748 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000C97EB1E0 00075D (v01 SgRef  SgTabl   00001000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000C97EB940 0013CA (v01 OptRef OptTabl  00001000 INTL 20051117)
[    0.000000] ACPI: SLIC 0x00000000C97ECD10 000176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x12fdf5000-0x12fdf9fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000012fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000c8eabfff]
[    0.000000]   node   0: [mem 0x00000000c988c000-0x00000000c9c89fff]
[    0.000000]   node   0: [mem 0x00000000c9ff5000-0x00000000c9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000012fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fdfffff]
[    0.000000] On node 0 totalpages: 1019472
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12803 pages used for memmap
[    0.000000]   DMA32 zone: 819380 pages, LIFO batch:31
[    0.000000]   Normal zone: 3064 pages used for memmap
[    0.000000]   Normal zone: 196096 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xcb200000-0xcf1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc8eac000-0xc911afff]
[    0.000000] PM: Registered nosave memory: [mem 0xc911b000-0xc953bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc953c000-0xc95c3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc95c4000-0xc9843fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9844000-0xc9848fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9849000-0xc988bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9c8a000-0xc9ff4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88012fa00000 s98264 r8192 d28712 u262144
[    0.000000] pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1003520
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-78-generic root=UUID=4d655d06-d6f8-4caf-8f01-0bbc85b4da92 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3889188K/4077888K available (8469K kernel code, 1294K rwdata, 3984K rodata, 1484K init, 1316K bss, 188700K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2294.894 MHz processor
[    0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.78 BogoMIPS (lpj=9179576)
[    0.000040] pid_max: default: 32768 minimum: 301
[    0.000047] ACPI: Core revision 20150930
[    0.011495] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.011517] Security Framework initialized
[    0.011519] Yama: becoming mindful.
[    0.011538] AppArmor: AppArmor initialized
[    0.011806] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012910] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.013412] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.013418] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.013641] Initializing cgroup subsys io
[    0.013645] Initializing cgroup subsys memory
[    0.013653] Initializing cgroup subsys devices
[    0.013655] Initializing cgroup subsys freezer
[    0.013657] Initializing cgroup subsys net_cls
[    0.013659] Initializing cgroup subsys perf_event
[    0.013661] Initializing cgroup subsys net_prio
[    0.013665] Initializing cgroup subsys hugetlb
[    0.013667] Initializing cgroup subsys pids
[    0.013689] CPU: Physical Processor ID: 0
[    0.013690] CPU: Processor Core ID: 0
[    0.013695] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.013696] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.014081] mce: CPU supports 9 MCE banks
[    0.014096] CPU0: Thermal monitoring enabled (TM1)
[    0.014102] process: using mwait in idle threads
[    0.014106] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.014107] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.014562] Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
[    0.019131] ftrace: allocating 32120 entries in 126 pages
[    0.035120] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.035122] smpboot: Max logical packages: 2
[    0.035195] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.035648] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.075336] TSC deadline timer enabled
[    0.075340] smpboot: CPU0: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.075358] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.075379] ... version:                3
[    0.075380] ... bit width:              48
[    0.075381] ... generic registers:      4
[    0.075382] ... value mask:             0000ffffffffffff
[    0.075383] ... max period:             00007fffffffffff
[    0.075383] ... fixed-purpose events:   3
[    0.075384] ... event mask:             000000070000000f
[    0.076218] x86: Booting SMP configuration:
[    0.076220] .... node  #0, CPUs:      #1
[    0.077196] microcode: CPU1 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.079782] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.079864]  #2
[    0.080613] microcode: CPU2 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.083185]  #3
[    0.083958] microcode: CPU3 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.086536]  #4 #5 #6 #7
[    0.098261] x86: Booted up 1 node, 8 CPUs
[    0.098264] smpboot: Total of 8 processors activated (36718.30 BogoMIPS)
[    0.106085] devtmpfs: initialized
[    0.108419] evm: security.selinux
[    0.108420] evm: security.SMACK64
[    0.108421] evm: security.SMACK64EXEC
[    0.108421] evm: security.SMACK64TRANSMUTE
[    0.108422] evm: security.SMACK64MMAP
[    0.108423] evm: security.ima
[    0.108424] evm: security.capability
[    0.108491] PM: Registering ACPI NVS region [mem 0xc911b000-0xc953bfff] (4329472 bytes)
[    0.108544] PM: Registering ACPI NVS region [mem 0xc95c4000-0xc9843fff] (2621440 bytes)
[    0.108576] PM: Registering ACPI NVS region [mem 0xc9849000-0xc988bfff] (274432 bytes)
[    0.108661] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.108676] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.108784] pinctrl core: initialized pinctrl subsystem
[    0.108893] RTC time: 12:48:01, date: 05/28/17
[    0.109007] NET: Registered protocol family 16
[    0.117881] cpuidle: using governor ladder
[    0.129877] cpuidle: using governor menu
[    0.129883] PCCT header not found.
[    0.129985] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.129986] ACPI: bus type PCI registered
[    0.129988] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.130066] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.130068] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.130078] PCI: Using configuration type 1 for base access
[    0.130117] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.146325] ACPI: Added _OSI(Module Device)
[    0.146327] ACPI: Added _OSI(Processor Device)
[    0.146328] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.146329] ACPI: Added _OSI(Processor Aggregator Device)
[    0.149593] ACPI: Executed 1 blocks of module-level executable AML code
[    0.152980] ACPI: Dynamic OEM Table Load:
[    0.152987] ACPI: SSDT 0xFFFF8800C48AB000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.153586] ACPI: Dynamic OEM Table Load:
[    0.153591] ACPI: SSDT 0xFFFF8800C48C9800 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.154125] ACPI: Dynamic OEM Table Load:
[    0.154129] ACPI: SSDT 0xFFFF8800C48B5400 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.155689] ACPI : EC: EC started
[    0.155790] ACPI: Interpreter enabled
[    0.155810] ACPI: (supports S0 S3 S4 S5)
[    0.155811] ACPI: Using IOAPIC for interrupt routing
[    0.155837] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.328135] ACPI: Power Resource [FN00] (off)
[    0.328216] ACPI: Power Resource [FN01] (off)
[    0.328294] ACPI: Power Resource [FN02] (off)
[    0.328370] ACPI: Power Resource [FN03] (off)
[    0.328446] ACPI: Power Resource [FN04] (off)
[    0.328988] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.328993] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.329247] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.329249] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.329681] PCI host bridge to bus 0000:00
[    0.329685] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.329687] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.329688] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.329690] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.329692] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.329693] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.329695] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.329697] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.329698] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.329700] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[    0.329702] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.329710] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.329806] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.329839] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.329885] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.329925] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.329938] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[    0.329944] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.329948] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.330062] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.330095] pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
[    0.330157] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.330204] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.330242] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.330270] pci 0000:00:16.0: reg 0x10: [mem 0xf791a000-0xf791a00f 64bit]
[    0.330328] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.330414] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.330444] pci 0000:00:1a.0: reg 0x10: [mem 0xf7918000-0xf79183ff]
[    0.330521] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.330580] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.330620] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.330648] pci 0000:00:1b.0: reg 0x10: [mem 0xf7910000-0xf7913fff 64bit]
[    0.330713] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.330764] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.330804] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.330881] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.330932] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.330969] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.331047] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.331097] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.331142] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.331172] pci 0000:00:1d.0: reg 0x10: [mem 0xf7917000-0xf79173ff]
[    0.331247] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.331305] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.331344] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    0.331523] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.331549] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.331557] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.331566] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.331574] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.331583] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.331591] pci 0000:00:1f.2: reg 0x24: [mem 0xf7916000-0xf79167ff]
[    0.331625] pci 0000:00:1f.2: PME# supported from D3hot
[    0.331702] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.331720] pci 0000:00:1f.3: reg 0x10: [mem 0xf7915000-0xf79150ff 64bit]
[    0.331742] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.331879] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
[    0.331901] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.331912] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.331923] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.331931] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.331939] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.332025] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.342010] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.342013] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.342015] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.342018] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.342149] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.342321] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.342444] pci 0000:02:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    0.342520] pci 0000:02:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.342778] pci 0000:02:00.0: supports D1 D2
[    0.342780] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.342914] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.354058] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.354062] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.354071] pci 0000:00:1c.0:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.354159] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[    0.354230] pci 0000:03:00.0: reg 0x10: [mem 0xf7800000-0xf787ffff 64bit]
[    0.354318] pci 0000:03:00.0: reg 0x30: [mem 0xf7880000-0xf788ffff pref]
[    0.354410] pci 0000:03:00.0: supports D1 D2
[    0.354412] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.354469] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.366035] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.366042] pci 0000:00:1c.1:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.446282] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.446333] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.446381] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.446428] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.446475] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.446523] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.446571] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.446617] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.446905] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.446964] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.447066] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.447068] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.447072] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.447073] vgaarb: loaded
[    0.447075] vgaarb: bridge control possible 0000:01:00.0
[    0.447076] vgaarb: no bridge control possible 0000:00:02.0
[    0.447287] SCSI subsystem initialized
[    0.447329] libata version 3.00 loaded.
[    0.447351] ACPI: bus type USB registered
[    0.447366] usbcore: registered new interface driver usbfs
[    0.447374] usbcore: registered new interface driver hub
[    0.447394] usbcore: registered new device driver usb
[    0.447530] PCI: Using ACPI for IRQ routing
[    0.449078] PCI: pci_cache_line_size set to 64 bytes
[    0.449133] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.449135] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.449136] e820: reserve RAM buffer [mem 0xc8eac000-0xcbffffff]
[    0.449138] e820: reserve RAM buffer [mem 0xc9c8a000-0xcbffffff]
[    0.449139] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
[    0.449141] e820: reserve RAM buffer [mem 0x12fe00000-0x12fffffff]
[    0.449257] NetLabel: Initializing
[    0.449258] NetLabel:  domain hash size = 128
[    0.449259] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.449271] NetLabel:  unlabeled traffic allowed by default
[    0.449337] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.449342] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.452359] amd_nb: Cannot enumerate AMD northbridges
[    0.452375] clocksource: Switched to clocksource hpet
[    0.458238] AppArmor: AppArmor Filesystem Enabled
[    0.458310] pnp: PnP ACPI init
[    0.458416] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.458421] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.458500] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.458502] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.458504] system 00:01: [io  0xffff] has been reserved
[    0.458506] system 00:01: [io  0xffff] has been reserved
[    0.458508] system 00:01: [io  0x0400-0x0453] could not be reserved
[    0.458509] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.458511] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.458513] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.458516] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.458540] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.458589] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.458592] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.458642] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.458645] system 00:04: [mem 0xff000000-0xff000fff] has been reserved
[    0.458647] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.458703] pnp 00:05: Plug and Play ACPI device, IDs ETD010a PNP0f13 (active)
[    0.458738] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.528642] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.528645] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.528647] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.528650] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.528653] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.528654] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.528656] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.528658] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.528660] system 00:07: [mem 0xff010000-0xffffffff] has been reserved
[    0.528662] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.528664] system 00:07: [mem 0xcf200000-0xcf200fff] has been reserved
[    0.528667] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.528809] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[    0.528812] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[    0.528814] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.528845] pnp: PnP ACPI: found 9 devices
[    0.535142] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.535173] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.535176] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.535179] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.535182] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.535186] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.535189] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.535197] pci 0000:00:1c.0:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.535203] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.535209] pci 0000:00:1c.1:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.535219] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.535221] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.535223] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.535224] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.535226] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.535228] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.535229] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.535231] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.535233] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.535234] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff window]
[    0.535236] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.535238] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.535239] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.535241] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.535243] pci_bus 0000:02: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.535245] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.535276] NET: Registered protocol family 2
[    0.535435] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.535513] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.535630] TCP: Hash tables configured (established 32768 bind 32768)
[    0.535654] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.535671] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.535727] NET: Registered protocol family 1
[    0.535744] pci 0000:00:02.0: Video device with shadowed ROM
[    0.576495] PCI: CLS 64 bytes, default 64
[    0.576546] Unpacking initramfs...
[    1.161428] Freeing initrd memory: 37176K (ffff880033754000 - ffff880035ba2000)
[    1.161486] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.161489] software IO TLB [mem 0xc4eac000-0xc8eac000] (64MB) mapped at [ffff8800c4eac000-ffff8800c8eabfff]
[    1.161570] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    1.161572] hw unit of domain pp0-core 2^-16 Joules
[    1.161573] hw unit of domain package 2^-16 Joules
[    1.161574] hw unit of domain pp1-gpu 2^-16 Joules
[    1.161770] Scanning for low memory corruption every 60 seconds
[    1.162160] audit: initializing netlink subsys (disabled)
[    1.162176] audit: type=2000 audit(1495975682.148:1): initialized
[    1.162642] Initialise system trusted keyring
[    1.162770] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.164140] zbud: loaded
[    1.164333] VFS: Disk quotas dquot_6.6.0
[    1.164384] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.164635] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.164879] fuse init (API version 7.23)
[    1.165012] Key type big_key registered
[    1.165026] Allocating IMA MOK and blacklist keyrings.
[    1.165454] Key type asymmetric registered
[    1.165457] Asymmetric key parser 'x509' registered
[    1.165494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.165530] io scheduler noop registered
[    1.165533] io scheduler deadline registered (default)
[    1.165562] io scheduler cfq registered
[    1.166152] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    1.166154] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.166157] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    1.166179] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.166181] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.166186] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.166210] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    1.166212] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.166217] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    1.166224] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.166230] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.166259] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[    1.166260] vesafb: scrolling: redraw
[    1.166262] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.166273] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 5632k, total 5632k
[    1.166368] Console: switching to colour frame buffer device 200x56
[    1.166390] fb0: VESA VGA frame buffer device
[    1.166407] intel_idle: MWAIT substates: 0x21120
[    1.166408] intel_idle: v0.4.1 model 0x3A
[    1.166409] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.236498] ACPI: AC Adapter [ACAD] (off-line)
[    1.236594] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.236598] ACPI: Power Button [PWRB]
[    1.236638] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.236677] ACPI: Lid Switch [LID0]
[    1.236716] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.236719] ACPI: Sleep Button [SLPB]
[    1.236754] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.236757] ACPI: Power Button [PWRF]
[    1.237754] thermal LNXTHERM:00: registered as thermal_zone0
[    1.237757] ACPI: Thermal Zone [TZ00] (28 C)
[    1.238105] thermal LNXTHERM:01: registered as thermal_zone1
[    1.238107] ACPI: Thermal Zone [TZ01] (61 C)
[    1.238152] GHES: HEST is not enabled!
[    1.238357] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.476378] ACPI: Battery Slot [BAT1] (battery present)
[    1.476648] Linux agpgart interface v0.103
[    1.479305] loop: module loaded
[    1.479508] libphy: Fixed MDIO Bus: probed
[    1.479512] tun: Universal TUN/TAP device driver, 1.6
[    1.479513] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.479554] PPP generic driver version 2.4.2
[    1.479610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.479615] ehci-pci: EHCI PCI platform driver
[    1.479738] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.479745] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.479758] ehci-pci 0000:00:1a.0: debug port 2
[    1.483647] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.483659] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7918000
[    1.492338] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.492375] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.492377] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.492378] usb usb1: Product: EHCI Host Controller
[    1.492380] usb usb1: Manufacturer: Linux 4.4.0-78-generic ehci_hcd
[    1.492382] usb usb1: SerialNumber: 0000:00:1a.0
[    1.492522] hub 1-0:1.0: USB hub found
[    1.492528] hub 1-0:1.0: 2 ports detected
[    1.492748] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.492753] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.492764] ehci-pci 0000:00:1d.0: debug port 2
[    1.496675] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.496685] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7917000
[    1.508361] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.508388] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.508390] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.508392] usb usb2: Product: EHCI Host Controller
[    1.508393] usb usb2: Manufacturer: Linux 4.4.0-78-generic ehci_hcd
[    1.508395] usb usb2: SerialNumber: 0000:00:1d.0
[    1.508523] hub 2-0:1.0: USB hub found
[    1.508529] hub 2-0:1.0: 2 ports detected
[    1.508640] ehci-platform: EHCI generic platform driver
[    1.508651] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.508656] ohci-pci: OHCI PCI platform driver
[    1.508667] ohci-platform: OHCI generic platform driver
[    1.508675] uhci_hcd: USB Universal Host Controller Interface driver
[    1.508785] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.508790] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.509877] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.509883] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.509968] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.509969] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.509971] usb usb3: Product: xHCI Host Controller
[    1.509973] usb usb3: Manufacturer: Linux 4.4.0-78-generic xhci-hcd
[    1.509974] usb usb3: SerialNumber: 0000:00:14.0
[    1.510100] hub 3-0:1.0: USB hub found
[    1.510109] hub 3-0:1.0: 4 ports detected
[    1.510420] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.510423] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.510451] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.510453] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.510455] usb usb4: Product: xHCI Host Controller
[    1.510456] usb usb4: Manufacturer: Linux 4.4.0-78-generic xhci-hcd
[    1.510458] usb usb4: SerialNumber: 0000:00:14.0
[    1.510580] hub 4-0:1.0: USB hub found
[    1.510589] hub 4-0:1.0: 4 ports detected
[    1.510931] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.526045] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.526050] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.526227] mousedev: PS/2 mouse device common for all mice
[    1.526603] rtc_cmos 00:02: RTC can wake from S4
[    1.526733] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.526760] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.526768] i2c /dev entries driver
[    1.526819] device-mapper: uevent: version 1.0.3
[    1.526883] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.526905] Intel P-state driver initializing.
[    1.527319] ledtrig-cpu: registered to indicate activity on CPUs
[    1.528102] NET: Registered protocol family 10
[    1.528447] NET: Registered protocol family 17
[    1.528471] Key type dns_resolver registered
[    1.529026] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529039] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529075] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529117] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529160] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529177] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529211] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529252] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529344] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.529698] registered taskstats version 1
[    1.529728] Loading compiled-in X.509 certificates
[    1.531479] Loaded X.509 cert 'Build time autogenerated kernel key: 779fd75203f0d36b99b83c7328fac831ec7adf9e'
[    1.531524] zswap: loaded using pool lzo/zbud
[    1.534423] Key type trusted registered
[    1.537774] Key type encrypted registered
[    1.537780] AppArmor: AppArmor sha1 policy hashing enabled
[    1.537783] ima: No TPM chip found, activating TPM-bypass!
[    1.537814] evm: HMAC attrs: 0x1
[    1.538167]   Magic number: 1:159:836
[    1.538305] rtc_cmos 00:02: setting system clock to 2017-05-28 12:48:02 UTC (1495975682)
[    1.538366] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.538367] EDD information not available.
[    1.538430] PM: Hibernation image not present or could not be loaded.
[    1.539403] Freeing unused kernel memory: 1484K (ffffffff81f45000 - ffffffff820b8000)
[    1.539404] Write protecting the kernel read-only data: 14336k
[    1.539651] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.539876] Freeing unused kernel memory: 1760K (ffff880001848000 - ffff880001a00000)
[    1.540305] Freeing unused kernel memory: 112K (ffff880001de4000 - ffff880001e00000)
[    1.547989] random: systemd-udevd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.548046] random: systemd-udevd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.548058] random: systemd-udevd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.548495] random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.548541] random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.548887] random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.548932] random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.548983] random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.549022] random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.549059] random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.637407] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.638280] wmi: Mapper loaded
[    1.718690] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.718716] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.719125] ahci 0000:00:1f.2: version 3.0
[    1.719305] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.719504] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000670000, 10:bf:48:46:c8:af, XID 0c900800 IRQ 28
[    1.719507] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.720575] [drm] Initialized drm 1.1.0 20060810
[    1.732373] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.732378] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    1.738095] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.741050] scsi host0: ahci
[    1.741191] scsi host1: ahci
[    1.741288] scsi host2: ahci
[    1.741388] scsi host3: ahci
[    1.741479] scsi host4: ahci
[    1.741578] scsi host5: ahci
[    1.741631] ata1: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916100 irq 29
[    1.741632] ata2: DUMMY
[    1.741634] ata3: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916200 irq 29
[    1.741636] ata4: DUMMY
[    1.741637] ata5: DUMMY
[    1.741638] ata6: DUMMY
[    1.742394] [drm] Memory usable by graphics device = 2048M
[    1.742397] checking generic (d0000000 580000) vs hw (d0000000 10000000)
[    1.742398] fb: switching to inteldrmfb from VESA VGA
[    1.742422] Console: switching to colour dummy device 80x25
[    1.742480] [drm] Replacing VGA console driver
[    1.746192] MXM: GUID detected in BIOS
[    1.746242] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    1.746281] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    1.746480] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    1.746483] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    1.746501] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[    1.746602] nouveau 0000:01:00.0: NVIDIA GF108 (0c1480a1)
[    1.748434] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.748435] [drm] Driver supports precise vblank timestamp query.
[    1.749133] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    1.763152] nouveau 0000:01:00.0: bios: version 70.08.a8.00.39
[    1.781562] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.782136] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.782353] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/LNXVIDEO:00/input/input7
[    1.782538] fbcon: inteldrmfb (fb0) is primary device
[    1.782598] Console: switching to colour frame buffer device 200x56
[    1.782617] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.782979] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.783106] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[    1.783203] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    1.804334] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.824349] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.890431] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[    1.936713] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.936715] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.937002] hub 1-1:1.0: USB hub found
[    1.937053] hub 1-1:1.0: 6 ports detected
[    1.957067] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.957070] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.957388] hub 2-1:1.0: USB hub found
[    1.957460] hub 2-1:1.0: 6 ports detected
[    2.012491] vga_switcheroo: enabled
[    2.012651] [TTM] Zone  kernel: Available graphics memory: 1964876 kiB
[    2.012661] [TTM] Initializing pool allocator
[    2.012668] [TTM] Initializing DMA pool allocator
[    2.012679] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[    2.012681] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    2.012684] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    2.012686] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    2.012687] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[    2.012689] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000000
[    2.024297] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.024318] [drm] Driver supports precise vblank timestamp query.
[    2.060359] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.062755] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    2.062767] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.062769] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.063908] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    2.065042] ata1.00: ATA-8: WDC WD7500BPKT-22PK4T0, 01.01A01, max UDMA/133
[    2.065044] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.067438] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    2.067441] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.067443] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.069707] ata1.00: configured for UDMA/133
[    2.069958] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPKT-2 1A01 PQ: 0 ANSI: 5
[    2.070274] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.070299] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[    2.070302] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.070389] sd 0:0:0:0: [sda] Write Protect is off
[    2.070391] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.070478] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.075610] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[    2.075633] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[    2.124490] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo ffff880128ecdc00
[    2.124588] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[    2.124593] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    2.155659]  sda: sda1 sda2 < sda5 >
[    2.156228] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.160358] tsc: Refined TSC clocksource calibration: 2294.786 MHz
[    2.160366] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f7e44a7, max_idle_ns: 440795281465 ns
[    2.208394] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    2.228360] usb 2-1.6: new low-speed USB device number 3 using ehci-pci
[    2.302901] usb 1-1.3: New USB device found, idVendor=13d3, idProduct=3362
[    2.302908] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.302912] usb 1-1.3: Product: Bluetooth USB Host Controller
[    2.302924] usb 1-1.3: Manufacturer: Atheros Communications
[    2.302925] usb 1-1.3: SerialNumber: Alaska Day 2006
[    2.324507] usb 2-1.6: New USB device found, idVendor=15d9, idProduct=0a4d
[    2.324510] usb 2-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.324511] usb 2-1.6: Product:  USB OPTICAL MOUSE
[    2.327930] hidraw: raw HID events driver (C) Jiri Kosina
[    2.331362] usbcore: registered new interface driver usbhid
[    2.331363] usbhid: USB HID core driver
[    2.333973] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:15D9:0A4D.0001/input/input9
[    2.334066] hid-generic 0003:15D9:0A4D.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.6/input0
[    2.392386] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.394145] ata3.00: ATAPI: MATSHITADVD-RAM UJ8B0, 1.00, max UDMA/100
[    2.396395] ata3.00: configured for UDMA/100
[    2.398833] scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8B0    1.00 PQ: 0 ANSI: 5
[    2.414115] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.414121] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.414314] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.414409] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.848590] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[    2.867589] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[    2.871737] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.888274] psmouse serio1: elantech: Elan sample query result 05, 24, 64
[    3.007667] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[    3.160594] clocksource: Switched to clocksource tsc
[    3.618142] random: nonblocking pool is initialized
[    3.755597] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.755734] systemd[1]: Detected architecture x86-64.
[    3.769641] systemd[1]: Set hostname to <Asus-K75VM>.
[    5.506244] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.506310] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.506349] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.506387] systemd[1]: Listening on udev Control Socket.
[    5.506406] systemd[1]: Listening on Syslog Socket.
[    5.506413] systemd[1]: Reached target Remote File Systems (Pre).
[    5.506430] systemd[1]: Listening on udev Kernel Socket.
[    5.506452] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.506481] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.506535] systemd[1]: Listening on Journal Audit Socket.
[    5.506543] systemd[1]: Reached target Encrypted Volumes.
[    5.506550] systemd[1]: Reached target Remote File Systems.
[    5.506629] systemd[1]: Created slice System Slice.
[    5.506648] systemd[1]: Reached target User and Group Name Lookups.
[    5.506689] systemd[1]: Created slice User and Session Slice.
[    5.506696] systemd[1]: Reached target Slices.
[    5.506722] systemd[1]: Listening on Journal Socket.
[    5.532324] systemd[1]: Mounting Debug File System...
[    5.532891] systemd[1]: Mounting Huge Pages File System...
[    5.533359] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.533696] systemd[1]: Started Braille Device Support.
[    5.534283] systemd[1]: Started Read required files in advance.
[    5.535731] systemd[1]: Starting Load Kernel Modules...
[    5.536046] systemd[1]: Starting Uncomplicated firewall...
[    5.536459] systemd[1]: Mounting POSIX Message Queue File System...
[    5.536780] systemd[1]: Starting Journal Service...
[    5.537075] systemd[1]: Starting Set console keymap...
[    5.537164] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    5.945890] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.960274] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.092784] lp: driver loaded but no devices found
[    6.124958] systemd[1]: Started Journal Service.
[    6.151195] ppdev: user-space parallel port driver
[    7.800162] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    7.800445] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[    7.800451] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    7.800595] nouveau 0000:01:00.0: DRM: suspending console...
[    7.800598] nouveau 0000:01:00.0: DRM: suspending display...
[    7.800610] nouveau 0000:01:00.0: DRM: evicting buffers...
[    7.800612] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[    7.800667] nouveau 0000:01:00.0: DRM: suspending client object trees...
[    7.800808] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[    8.914645] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    9.410162] systemd-journald[280]: Received request to flush runtime journal from PID 1
[    9.612132] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.675211] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[    9.675219] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.675223] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[    9.675227] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[    9.675231] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.675233] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[    9.675237] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[    9.675240] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.675242] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[    9.675246] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[    9.675249] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.675251] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.834050] AVX version of gcm_enc/dec engaged.
[    9.834052] AES CTR mode by8 optimization enabled
[    9.967962] Bluetooth: Core ver 2.21
[    9.967976] NET: Registered protocol family 31
[    9.967977] Bluetooth: HCI device and connection manager initialized
[    9.967980] Bluetooth: HCI socket layer initialized
[    9.967982] Bluetooth: L2CAP socket layer initialized
[    9.967986] Bluetooth: SCO socket layer initialized
[   10.232585] usbcore: registered new interface driver btusb
[   10.322504] usbcore: registered new interface driver ath3k
[   10.737498] intel_rapl: Found RAPL domain package
[   10.737501] intel_rapl: Found RAPL domain core
[   10.737502] intel_rapl: Found RAPL domain uncore
[   10.737507] intel_rapl: RAPL package 0 domain package locked by BIOS
[   10.871798] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.871801] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.871802] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   10.871804] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   10.871805] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   10.871806] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   10.871807] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   10.883208] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.883285] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.883354] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.052533] asus_wmi: ASUS WMI generic driver loaded
[   11.126665] asus_wmi: Initialization: 0x1
[   11.126699] asus_wmi: BIOS WMI version: 7.8
[   11.126726] asus_wmi: SFUN value: 0x4a0077
[   11.127197] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input13
[   11.127595] asus_wmi: Number of fans: 0
[   11.290920] ath: phy0: Disable PLL PowerSave
[   11.299342] ath: phy0: ASPM enabled: 0x43
[   11.299344] ath: EEPROM regdomain: 0x60
[   11.299345] ath: EEPROM indicates we should expect a direct regpair map
[   11.299346] ath: Country alpha2 being used: 00
[   11.299347] ath: Regpair used: 0x60
[   11.412124] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.412441] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90001100000, irq=17
[   11.626123] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[   12.329836] cfg80211: World regulatory domain updated:
[   12.329841] cfg80211:  DFS Master region: unset
[   12.329841] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.329844] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.329845] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.329846] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   12.329848] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   12.329849] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   12.329850] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   12.329851] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   12.329852] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   14.368349] audit: type=1400 audit(1495975695.326:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=755 comm="apparmor_parser"
[   14.369843] audit: type=1400 audit(1495975695.326:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=757 comm="apparmor_parser"
[   14.369849] audit: type=1400 audit(1495975695.326:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=757 comm="apparmor_parser"
[   14.398586] audit: type=1400 audit(1495975695.354:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=765 comm="apparmor_parser"
[   14.534703] audit: type=1400 audit(1495975695.490:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=758 comm="apparmor_parser"
[   14.534919] audit: type=1400 audit(1495975695.490:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=767 comm="apparmor_parser"
[   14.536348] audit: type=1400 audit(1495975695.494:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=752 comm="apparmor_parser"
[   14.536352] audit: type=1400 audit(1495975695.494:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=752 comm="apparmor_parser"
[   14.536356] audit: type=1400 audit(1495975695.494:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=752 comm="apparmor_parser"
[   14.536359] audit: type=1400 audit(1495975695.494:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=752 comm="apparmor_parser"
[   15.278143] Adding 4075516k swap on /dev/sda5.  Priority:-1 extents:1 across:4075516k FS
[   15.580105] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   15.729553] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   15.729561] nouveau 0000:01:00.0: DRM: resuming display...
[   15.729578] nouveau 0000:01:00.0: DRM: resuming console...
[   17.761871] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.761874] Bluetooth: BNEP filters: protocol multicast
[   17.761879] Bluetooth: BNEP socket layer initialized
[   22.218570] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   22.233349] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   22.236776] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   22.613502] r8169 0000:02:00.0 enp2s0: link down
[   22.613568] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   23.801772] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   25.696081] wlp3s0: authenticate with 42:03:81:d1:d4:50
[   25.717689] wlp3s0: send auth to 42:03:81:d1:d4:50 (try 1/3)
[   25.719604] wlp3s0: authenticated
[   25.723201] wlp3s0: associate with 42:03:81:d1:d4:50 (try 1/3)
[   25.732508] wlp3s0: RX AssocResp from 42:03:81:d1:d4:50 (capab=0x411 status=0 aid=3)
[   25.732618] wlp3s0: associated
[   25.732628] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   28.895987] Bluetooth: RFCOMM TTY layer initialized
[   28.895995] Bluetooth: RFCOMM socket layer initialized
[   28.895999] Bluetooth: RFCOMM ver 1.11
[   39.050697] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 2.
[   39.050711] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000042 66000106 
[   68.800637] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 2.
[   68.800658] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000042 66000106 
[   98.842008] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 2.
[   98.842019] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000042 66000106 
[   98.842035] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device

Commande dmesg (avec l'appui sur la combinaison de touche) :

[    0.000000] microcode: CPU0 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-78-generic (buildd@lgw01-11) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #99-Ubuntu SMP Thu Apr 27 15:29:09 UTC 2017 (Ubuntu 4.4.0-78.99-generic 4.4.62)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-78-generic root=UUID=4d655d06-d6f8-4caf-8f01-0bbc85b4da92 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c8eabfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c8eac000-0x00000000c911afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c911b000-0x00000000c953bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c953c000-0x00000000c95c3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c95c4000-0x00000000c9843fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c9844000-0x00000000c9848fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000c9849000-0x00000000c988bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c988c000-0x00000000c9c89fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c9c8a000-0x00000000c9ff4fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c9ff5000-0x00000000c9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. K75VM/K75VM, BIOS 208 03/14/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x12fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 120000000 mask FF0000000 write-back
[    0.000000]   3 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   4 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   5 base 0CC000000 mask FFC000000 uncachable
[    0.000000]   6 base 0CB000000 mask FFF000000 uncachable
[    0.000000]   7 base 12FE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 4GB, range: 512MB, type WB
[    0.000000] reg 2, base: 4608MB, range: 256MB, type WB
[    0.000000] reg 3, base: 3584MB, range: 512MB, type UC
[    0.000000] reg 4, base: 3328MB, range: 256MB, type UC
[    0.000000] reg 5, base: 3264MB, range: 64MB, type UC
[    0.000000] reg 6, base: 3248MB, range: 16MB, type UC
[    0.000000] reg 7, base: 4862MB, range: 2MB, type UC
[    0.000000] total RAM covered: 4014M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 4M 	num_reg: 8  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 128MB, type WB
[    0.000000] reg 3, base: 3200MB, range: 32MB, type WB
[    0.000000] reg 4, base: 3232MB, range: 16MB, type WB
[    0.000000] reg 5, base: 4GB, range: 512MB, type WB
[    0.000000] reg 6, base: 4608MB, range: 256MB, type WB
[    0.000000] reg 7, base: 4862MB, range: 2MB, type UC
[    0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc20-0x000fcc2f] mapped at [ffff8800000fcc20]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
[    0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[    0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[    0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[    0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[    0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33754000-0x35ba1fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000C97DB080 00007C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000C97E91F8 0000F4 (v04 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000C97DB190 00E062 (v02 _ASUS_ Notebook 00000117 INTL 20091112)
[    0.000000] ACPI: FACS 0x00000000C9838F80 000040
[    0.000000] ACPI: APIC 0x00000000C97E92F0 000092 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000C97E9388 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000C97E93C8 0006E9 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[    0.000000] ACPI: HPET 0x00000000C97E9AB8 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000C97E9AF0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000C97E9E60 0008E4 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000C97EA748 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000C97EB1E0 00075D (v01 SgRef  SgTabl   00001000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000C97EB940 0013CA (v01 OptRef OptTabl  00001000 INTL 20051117)
[    0.000000] ACPI: SLIC 0x00000000C97ECD10 000176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x12fdf5000-0x12fdf9fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000012fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000c8eabfff]
[    0.000000]   node   0: [mem 0x00000000c988c000-0x00000000c9c89fff]
[    0.000000]   node   0: [mem 0x00000000c9ff5000-0x00000000c9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000012fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fdfffff]
[    0.000000] On node 0 totalpages: 1019472
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12803 pages used for memmap
[    0.000000]   DMA32 zone: 819380 pages, LIFO batch:31
[    0.000000]   Normal zone: 3064 pages used for memmap
[    0.000000]   Normal zone: 196096 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xcb200000-0xcf1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc8eac000-0xc911afff]
[    0.000000] PM: Registered nosave memory: [mem 0xc911b000-0xc953bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc953c000-0xc95c3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc95c4000-0xc9843fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9844000-0xc9848fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9849000-0xc988bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9c8a000-0xc9ff4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88012fa00000 s98264 r8192 d28712 u262144
[    0.000000] pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1003520
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-78-generic root=UUID=4d655d06-d6f8-4caf-8f01-0bbc85b4da92 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3889188K/4077888K available (8469K kernel code, 1294K rwdata, 3984K rodata, 1484K init, 1316K bss, 188700K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2294.894 MHz processor
[    0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.78 BogoMIPS (lpj=9179576)
[    0.000040] pid_max: default: 32768 minimum: 301
[    0.000047] ACPI: Core revision 20150930
[    0.011495] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.011517] Security Framework initialized
[    0.011519] Yama: becoming mindful.
[    0.011538] AppArmor: AppArmor initialized
[    0.011806] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012910] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.013412] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.013418] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.013641] Initializing cgroup subsys io
[    0.013645] Initializing cgroup subsys memory
[    0.013653] Initializing cgroup subsys devices
[    0.013655] Initializing cgroup subsys freezer
[    0.013657] Initializing cgroup subsys net_cls
[    0.013659] Initializing cgroup subsys perf_event
[    0.013661] Initializing cgroup subsys net_prio
[    0.013665] Initializing cgroup subsys hugetlb
[    0.013667] Initializing cgroup subsys pids
[    0.013689] CPU: Physical Processor ID: 0
[    0.013690] CPU: Processor Core ID: 0
[    0.013695] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.013696] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.014081] mce: CPU supports 9 MCE banks
[    0.014096] CPU0: Thermal monitoring enabled (TM1)
[    0.014102] process: using mwait in idle threads
[    0.014106] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.014107] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.014562] Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
[    0.019131] ftrace: allocating 32120 entries in 126 pages
[    0.035120] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.035122] smpboot: Max logical packages: 2
[    0.035195] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.035648] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.075336] TSC deadline timer enabled
[    0.075340] smpboot: CPU0: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.075358] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.075379] ... version:                3
[    0.075380] ... bit width:              48
[    0.075381] ... generic registers:      4
[    0.075382] ... value mask:             0000ffffffffffff
[    0.075383] ... max period:             00007fffffffffff
[    0.075383] ... fixed-purpose events:   3
[    0.075384] ... event mask:             000000070000000f
[    0.076218] x86: Booting SMP configuration:
[    0.076220] .... node  #0, CPUs:      #1
[    0.077196] microcode: CPU1 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.079782] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.079864]  #2
[    0.080613] microcode: CPU2 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.083185]  #3
[    0.083958] microcode: CPU3 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.086536]  #4 #5 #6 #7
[    0.098261] x86: Booted up 1 node, 8 CPUs
[    0.098264] smpboot: Total of 8 processors activated (36718.30 BogoMIPS)
[    0.106085] devtmpfs: initialized
[    0.108419] evm: security.selinux
[    0.108420] evm: security.SMACK64
[    0.108421] evm: security.SMACK64EXEC
[    0.108421] evm: security.SMACK64TRANSMUTE
[    0.108422] evm: security.SMACK64MMAP
[    0.108423] evm: security.ima
[    0.108424] evm: security.capability
[    0.108491] PM: Registering ACPI NVS region [mem 0xc911b000-0xc953bfff] (4329472 bytes)
[    0.108544] PM: Registering ACPI NVS region [mem 0xc95c4000-0xc9843fff] (2621440 bytes)
[    0.108576] PM: Registering ACPI NVS region [mem 0xc9849000-0xc988bfff] (274432 bytes)
[    0.108661] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.108676] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.108784] pinctrl core: initialized pinctrl subsystem
[    0.108893] RTC time: 12:48:01, date: 05/28/17
[    0.109007] NET: Registered protocol family 16
[    0.117881] cpuidle: using governor ladder
[    0.129877] cpuidle: using governor menu
[    0.129883] PCCT header not found.
[    0.129985] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.129986] ACPI: bus type PCI registered
[    0.129988] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.130066] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.130068] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.130078] PCI: Using configuration type 1 for base access
[    0.130117] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.146325] ACPI: Added _OSI(Module Device)
[    0.146327] ACPI: Added _OSI(Processor Device)
[    0.146328] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.146329] ACPI: Added _OSI(Processor Aggregator Device)
[    0.149593] ACPI: Executed 1 blocks of module-level executable AML code
[    0.152980] ACPI: Dynamic OEM Table Load:
[    0.152987] ACPI: SSDT 0xFFFF8800C48AB000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.153586] ACPI: Dynamic OEM Table Load:
[    0.153591] ACPI: SSDT 0xFFFF8800C48C9800 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.154125] ACPI: Dynamic OEM Table Load:
[    0.154129] ACPI: SSDT 0xFFFF8800C48B5400 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.155689] ACPI : EC: EC started
[    0.155790] ACPI: Interpreter enabled
[    0.155810] ACPI: (supports S0 S3 S4 S5)
[    0.155811] ACPI: Using IOAPIC for interrupt routing
[    0.155837] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.328135] ACPI: Power Resource [FN00] (off)
[    0.328216] ACPI: Power Resource [FN01] (off)
[    0.328294] ACPI: Power Resource [FN02] (off)
[    0.328370] ACPI: Power Resource [FN03] (off)
[    0.328446] ACPI: Power Resource [FN04] (off)
[    0.328988] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.328993] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.329247] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.329249] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.329681] PCI host bridge to bus 0000:00
[    0.329685] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.329687] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.329688] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.329690] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.329692] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.329693] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.329695] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.329697] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.329698] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.329700] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[    0.329702] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.329710] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.329806] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.329839] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.329885] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.329925] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.329938] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[    0.329944] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.329948] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.330062] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.330095] pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
[    0.330157] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.330204] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.330242] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.330270] pci 0000:00:16.0: reg 0x10: [mem 0xf791a000-0xf791a00f 64bit]
[    0.330328] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.330414] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.330444] pci 0000:00:1a.0: reg 0x10: [mem 0xf7918000-0xf79183ff]
[    0.330521] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.330580] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.330620] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.330648] pci 0000:00:1b.0: reg 0x10: [mem 0xf7910000-0xf7913fff 64bit]
[    0.330713] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.330764] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.330804] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.330881] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.330932] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.330969] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.331047] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.331097] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.331142] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.331172] pci 0000:00:1d.0: reg 0x10: [mem 0xf7917000-0xf79173ff]
[    0.331247] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.331305] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.331344] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    0.331523] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.331549] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.331557] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.331566] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.331574] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.331583] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.331591] pci 0000:00:1f.2: reg 0x24: [mem 0xf7916000-0xf79167ff]
[    0.331625] pci 0000:00:1f.2: PME# supported from D3hot
[    0.331702] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.331720] pci 0000:00:1f.3: reg 0x10: [mem 0xf7915000-0xf79150ff 64bit]
[    0.331742] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.331879] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
[    0.331901] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.331912] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.331923] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.331931] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.331939] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.332025] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.342010] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.342013] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.342015] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.342018] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.342149] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.342321] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.342444] pci 0000:02:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    0.342520] pci 0000:02:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.342778] pci 0000:02:00.0: supports D1 D2
[    0.342780] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.342914] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.354058] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.354062] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.354071] pci 0000:00:1c.0:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.354159] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[    0.354230] pci 0000:03:00.0: reg 0x10: [mem 0xf7800000-0xf787ffff 64bit]
[    0.354318] pci 0000:03:00.0: reg 0x30: [mem 0xf7880000-0xf788ffff pref]
[    0.354410] pci 0000:03:00.0: supports D1 D2
[    0.354412] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.354469] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.366035] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.366042] pci 0000:00:1c.1:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.446282] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.446333] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.446381] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.446428] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.446475] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.446523] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.446571] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.446617] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.446905] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.446964] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.447066] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.447068] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.447072] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.447073] vgaarb: loaded
[    0.447075] vgaarb: bridge control possible 0000:01:00.0
[    0.447076] vgaarb: no bridge control possible 0000:00:02.0
[    0.447287] SCSI subsystem initialized
[    0.447329] libata version 3.00 loaded.
[    0.447351] ACPI: bus type USB registered
[    0.447366] usbcore: registered new interface driver usbfs
[    0.447374] usbcore: registered new interface driver hub
[    0.447394] usbcore: registered new device driver usb
[    0.447530] PCI: Using ACPI for IRQ routing
[    0.449078] PCI: pci_cache_line_size set to 64 bytes
[    0.449133] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.449135] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.449136] e820: reserve RAM buffer [mem 0xc8eac000-0xcbffffff]
[    0.449138] e820: reserve RAM buffer [mem 0xc9c8a000-0xcbffffff]
[    0.449139] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
[    0.449141] e820: reserve RAM buffer [mem 0x12fe00000-0x12fffffff]
[    0.449257] NetLabel: Initializing
[    0.449258] NetLabel:  domain hash size = 128
[    0.449259] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.449271] NetLabel:  unlabeled traffic allowed by default
[    0.449337] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.449342] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.452359] amd_nb: Cannot enumerate AMD northbridges
[    0.452375] clocksource: Switched to clocksource hpet
[    0.458238] AppArmor: AppArmor Filesystem Enabled
[    0.458310] pnp: PnP ACPI init
[    0.458416] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.458421] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.458500] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.458502] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.458504] system 00:01: [io  0xffff] has been reserved
[    0.458506] system 00:01: [io  0xffff] has been reserved
[    0.458508] system 00:01: [io  0x0400-0x0453] could not be reserved
[    0.458509] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.458511] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.458513] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.458516] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.458540] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.458589] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.458592] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.458642] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.458645] system 00:04: [mem 0xff000000-0xff000fff] has been reserved
[    0.458647] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.458703] pnp 00:05: Plug and Play ACPI device, IDs ETD010a PNP0f13 (active)
[    0.458738] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.528642] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.528645] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.528647] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.528650] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.528653] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.528654] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.528656] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.528658] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.528660] system 00:07: [mem 0xff010000-0xffffffff] has been reserved
[    0.528662] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.528664] system 00:07: [mem 0xcf200000-0xcf200fff] has been reserved
[    0.528667] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.528809] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[    0.528812] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[    0.528814] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.528845] pnp: PnP ACPI: found 9 devices
[    0.535142] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.535173] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.535176] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.535179] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.535182] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.535186] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.535189] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.535197] pci 0000:00:1c.0:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.535203] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.535209] pci 0000:00:1c.1:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.535219] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.535221] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.535223] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.535224] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.535226] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.535228] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.535229] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.535231] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.535233] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.535234] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff window]
[    0.535236] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.535238] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.535239] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.535241] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.535243] pci_bus 0000:02: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.535245] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.535276] NET: Registered protocol family 2
[    0.535435] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.535513] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.535630] TCP: Hash tables configured (established 32768 bind 32768)
[    0.535654] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.535671] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.535727] NET: Registered protocol family 1
[    0.535744] pci 0000:00:02.0: Video device with shadowed ROM
[    0.576495] PCI: CLS 64 bytes, default 64
[    0.576546] Unpacking initramfs...
[    1.161428] Freeing initrd memory: 37176K (ffff880033754000 - ffff880035ba2000)
[    1.161486] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.161489] software IO TLB [mem 0xc4eac000-0xc8eac000] (64MB) mapped at [ffff8800c4eac000-ffff8800c8eabfff]
[    1.161570] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    1.161572] hw unit of domain pp0-core 2^-16 Joules
[    1.161573] hw unit of domain package 2^-16 Joules
[    1.161574] hw unit of domain pp1-gpu 2^-16 Joules
[    1.161770] Scanning for low memory corruption every 60 seconds
[    1.162160] audit: initializing netlink subsys (disabled)
[    1.162176] audit: type=2000 audit(1495975682.148:1): initialized
[    1.162642] Initialise system trusted keyring
[    1.162770] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.164140] zbud: loaded
[    1.164333] VFS: Disk quotas dquot_6.6.0
[    1.164384] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.164635] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.164879] fuse init (API version 7.23)
[    1.165012] Key type big_key registered
[    1.165026] Allocating IMA MOK and blacklist keyrings.
[    1.165454] Key type asymmetric registered
[    1.165457] Asymmetric key parser 'x509' registered
[    1.165494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.165530] io scheduler noop registered
[    1.165533] io scheduler deadline registered (default)
[    1.165562] io scheduler cfq registered
[    1.166152] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    1.166154] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.166157] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    1.166179] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.166181] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.166186] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.166210] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    1.166212] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.166217] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    1.166224] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.166230] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.166259] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[    1.166260] vesafb: scrolling: redraw
[    1.166262] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.166273] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 5632k, total 5632k
[    1.166368] Console: switching to colour frame buffer device 200x56
[    1.166390] fb0: VESA VGA frame buffer device
[    1.166407] intel_idle: MWAIT substates: 0x21120
[    1.166408] intel_idle: v0.4.1 model 0x3A
[    1.166409] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.236498] ACPI: AC Adapter [ACAD] (off-line)
[    1.236594] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.236598] ACPI: Power Button [PWRB]
[    1.236638] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.236677] ACPI: Lid Switch [LID0]
[    1.236716] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.236719] ACPI: Sleep Button [SLPB]
[    1.236754] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.236757] ACPI: Power Button [PWRF]
[    1.237754] thermal LNXTHERM:00: registered as thermal_zone0
[    1.237757] ACPI: Thermal Zone [TZ00] (28 C)
[    1.238105] thermal LNXTHERM:01: registered as thermal_zone1
[    1.238107] ACPI: Thermal Zone [TZ01] (61 C)
[    1.238152] GHES: HEST is not enabled!
[    1.238357] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.476378] ACPI: Battery Slot [BAT1] (battery present)
[    1.476648] Linux agpgart interface v0.103
[    1.479305] loop: module loaded
[    1.479508] libphy: Fixed MDIO Bus: probed
[    1.479512] tun: Universal TUN/TAP device driver, 1.6
[    1.479513] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.479554] PPP generic driver version 2.4.2
[    1.479610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.479615] ehci-pci: EHCI PCI platform driver
[    1.479738] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.479745] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.479758] ehci-pci 0000:00:1a.0: debug port 2
[    1.483647] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.483659] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7918000
[    1.492338] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.492375] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.492377] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.492378] usb usb1: Product: EHCI Host Controller
[    1.492380] usb usb1: Manufacturer: Linux 4.4.0-78-generic ehci_hcd
[    1.492382] usb usb1: SerialNumber: 0000:00:1a.0
[    1.492522] hub 1-0:1.0: USB hub found
[    1.492528] hub 1-0:1.0: 2 ports detected
[    1.492748] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.492753] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.492764] ehci-pci 0000:00:1d.0: debug port 2
[    1.496675] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.496685] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7917000
[    1.508361] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.508388] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.508390] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.508392] usb usb2: Product: EHCI Host Controller
[    1.508393] usb usb2: Manufacturer: Linux 4.4.0-78-generic ehci_hcd
[    1.508395] usb usb2: SerialNumber: 0000:00:1d.0
[    1.508523] hub 2-0:1.0: USB hub found
[    1.508529] hub 2-0:1.0: 2 ports detected
[    1.508640] ehci-platform: EHCI generic platform driver
[    1.508651] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.508656] ohci-pci: OHCI PCI platform driver
[    1.508667] ohci-platform: OHCI generic platform driver
[    1.508675] uhci_hcd: USB Universal Host Controller Interface driver
[    1.508785] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.508790] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.509877] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.509883] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.509968] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.509969] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.509971] usb usb3: Product: xHCI Host Controller
[    1.509973] usb usb3: Manufacturer: Linux 4.4.0-78-generic xhci-hcd
[    1.509974] usb usb3: SerialNumber: 0000:00:14.0
[    1.510100] hub 3-0:1.0: USB hub found
[    1.510109] hub 3-0:1.0: 4 ports detected
[    1.510420] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.510423] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.510451] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.510453] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.510455] usb usb4: Product: xHCI Host Controller
[    1.510456] usb usb4: Manufacturer: Linux 4.4.0-78-generic xhci-hcd
[    1.510458] usb usb4: SerialNumber: 0000:00:14.0
[    1.510580] hub 4-0:1.0: USB hub found
[    1.510589] hub 4-0:1.0: 4 ports detected
[    1.510931] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.526045] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.526050] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.526227] mousedev: PS/2 mouse device common for all mice
[    1.526603] rtc_cmos 00:02: RTC can wake from S4
[    1.526733] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.526760] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.526768] i2c /dev entries driver
[    1.526819] device-mapper: uevent: version 1.0.3
[    1.526883] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.526905] Intel P-state driver initializing.
[    1.527319] ledtrig-cpu: registered to indicate activity on CPUs
[    1.528102] NET: Registered protocol family 10
[    1.528447] NET: Registered protocol family 17
[    1.528471] Key type dns_resolver registered
[    1.529026] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529039] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529075] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529117] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529160] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529177] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529211] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529252] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x1c
[    1.529344] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.529698] registered taskstats version 1
[    1.529728] Loading compiled-in X.509 certificates
[    1.531479] Loaded X.509 cert 'Build time autogenerated kernel key: 779fd75203f0d36b99b83c7328fac831ec7adf9e'
[    1.531524] zswap: loaded using pool lzo/zbud
[    1.534423] Key type trusted registered
[    1.537774] Key type encrypted registered
[    1.537780] AppArmor: AppArmor sha1 policy hashing enabled
[    1.537783] ima: No TPM chip found, activating TPM-bypass!
[    1.537814] evm: HMAC attrs: 0x1
[    1.538167]   Magic number: 1:159:836
[    1.538305] rtc_cmos 00:02: setting system clock to 2017-05-28 12:48:02 UTC (1495975682)
[    1.538366] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.538367] EDD information not available.
[    1.538430] PM: Hibernation image not present or could not be loaded.
[    1.539403] Freeing unused kernel memory: 1484K (ffffffff81f45000 - ffffffff820b8000)
[    1.539404] Write protecting the kernel read-only data: 14336k
[    1.539651] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.539876] Freeing unused kernel memory: 1760K (ffff880001848000 - ffff880001a00000)
[    1.540305] Freeing unused kernel memory: 112K (ffff880001de4000 - ffff880001e00000)
[    1.547989] random: systemd-udevd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.548046] random: systemd-udevd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.548058] random: systemd-udevd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.548495] random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.548541] random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.548887] random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.548932] random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.548983] random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.549022] random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.549059] random: udevadm: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
[    1.637407] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.638280] wmi: Mapper loaded
[    1.718690] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.718716] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.719125] ahci 0000:00:1f.2: version 3.0
[    1.719305] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.719504] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000670000, 10:bf:48:46:c8:af, XID 0c900800 IRQ 28
[    1.719507] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.720575] [drm] Initialized drm 1.1.0 20060810
[    1.732373] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.732378] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    1.738095] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.741050] scsi host0: ahci
[    1.741191] scsi host1: ahci
[    1.741288] scsi host2: ahci
[    1.741388] scsi host3: ahci
[    1.741479] scsi host4: ahci
[    1.741578] scsi host5: ahci
[    1.741631] ata1: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916100 irq 29
[    1.741632] ata2: DUMMY
[    1.741634] ata3: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916200 irq 29
[    1.741636] ata4: DUMMY
[    1.741637] ata5: DUMMY
[    1.741638] ata6: DUMMY
[    1.742394] [drm] Memory usable by graphics device = 2048M
[    1.742397] checking generic (d0000000 580000) vs hw (d0000000 10000000)
[    1.742398] fb: switching to inteldrmfb from VESA VGA
[    1.742422] Console: switching to colour dummy device 80x25
[    1.742480] [drm] Replacing VGA console driver
[    1.746192] MXM: GUID detected in BIOS
[    1.746242] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    1.746281] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    1.746480] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    1.746483] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    1.746501] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[    1.746602] nouveau 0000:01:00.0: NVIDIA GF108 (0c1480a1)
[    1.748434] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.748435] [drm] Driver supports precise vblank timestamp query.
[    1.749133] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    1.763152] nouveau 0000:01:00.0: bios: version 70.08.a8.00.39
[    1.781562] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.782136] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.782353] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/LNXVIDEO:00/input/input7
[    1.782538] fbcon: inteldrmfb (fb0) is primary device
[    1.782598] Console: switching to colour frame buffer device 200x56
[    1.782617] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.782979] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.783106] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[    1.783203] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    1.804334] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.824349] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.890431] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[    1.936713] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.936715] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.937002] hub 1-1:1.0: USB hub found
[    1.937053] hub 1-1:1.0: 6 ports detected
[    1.957067] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.957070] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.957388] hub 2-1:1.0: USB hub found
[    1.957460] hub 2-1:1.0: 6 ports detected
[    2.012491] vga_switcheroo: enabled
[    2.012651] [TTM] Zone  kernel: Available graphics memory: 1964876 kiB
[    2.012661] [TTM] Initializing pool allocator
[    2.012668] [TTM] Initializing DMA pool allocator
[    2.012679] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[    2.012681] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    2.012684] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    2.012686] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    2.012687] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[    2.012689] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000000
[    2.024297] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.024318] [drm] Driver supports precise vblank timestamp query.
[    2.060359] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.062755] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    2.062767] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.062769] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.063908] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    2.065042] ata1.00: ATA-8: WDC WD7500BPKT-22PK4T0, 01.01A01, max UDMA/133
[    2.065044] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.067438] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    2.067441] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.067443] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.069707] ata1.00: configured for UDMA/133
[    2.069958] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPKT-2 1A01 PQ: 0 ANSI: 5
[    2.070274] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.070299] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[    2.070302] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.070389] sd 0:0:0:0: [sda] Write Protect is off
[    2.070391] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.070478] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.075610] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[    2.075633] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[    2.124490] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo ffff880128ecdc00
[    2.124588] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[    2.124593] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    2.155659]  sda: sda1 sda2 < sda5 >
[    2.156228] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.160358] tsc: Refined TSC clocksource calibration: 2294.786 MHz
[    2.160366] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f7e44a7, max_idle_ns: 440795281465 ns
[    2.208394] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    2.228360] usb 2-1.6: new low-speed USB device number 3 using ehci-pci
[    2.302901] usb 1-1.3: New USB device found, idVendor=13d3, idProduct=3362
[    2.302908] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.302912] usb 1-1.3: Product: Bluetooth USB Host Controller
[    2.302924] usb 1-1.3: Manufacturer: Atheros Communications
[    2.302925] usb 1-1.3: SerialNumber: Alaska Day 2006
[    2.324507] usb 2-1.6: New USB device found, idVendor=15d9, idProduct=0a4d
[    2.324510] usb 2-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.324511] usb 2-1.6: Product:  USB OPTICAL MOUSE
[    2.327930] hidraw: raw HID events driver (C) Jiri Kosina
[    2.331362] usbcore: registered new interface driver usbhid
[    2.331363] usbhid: USB HID core driver
[    2.333973] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:15D9:0A4D.0001/input/input9
[    2.334066] hid-generic 0003:15D9:0A4D.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.6/input0
[    2.392386] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.394145] ata3.00: ATAPI: MATSHITADVD-RAM UJ8B0, 1.00, max UDMA/100
[    2.396395] ata3.00: configured for UDMA/100
[    2.398833] scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8B0    1.00 PQ: 0 ANSI: 5
[    2.414115] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.414121] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.414314] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.414409] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.848590] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[    2.867589] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[    2.871737] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.888274] psmouse serio1: elantech: Elan sample query result 05, 24, 64
[    3.007667] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[    3.160594] clocksource: Switched to clocksource tsc
[    3.618142] random: nonblocking pool is initialized
[    3.755597] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.755734] systemd[1]: Detected architecture x86-64.
[    3.769641] systemd[1]: Set hostname to <Asus-K75VM>.
[    5.506244] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.506310] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.506349] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.506387] systemd[1]: Listening on udev Control Socket.
[    5.506406] systemd[1]: Listening on Syslog Socket.
[    5.506413] systemd[1]: Reached target Remote File Systems (Pre).
[    5.506430] systemd[1]: Listening on udev Kernel Socket.
[    5.506452] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.506481] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.506535] systemd[1]: Listening on Journal Audit Socket.
[    5.506543] systemd[1]: Reached target Encrypted Volumes.
[    5.506550] systemd[1]: Reached target Remote File Systems.
[    5.506629] systemd[1]: Created slice System Slice.
[    5.506648] systemd[1]: Reached target User and Group Name Lookups.
[    5.506689] systemd[1]: Created slice User and Session Slice.
[    5.506696] systemd[1]: Reached target Slices.
[    5.506722] systemd[1]: Listening on Journal Socket.
[    5.532324] systemd[1]: Mounting Debug File System...
[    5.532891] systemd[1]: Mounting Huge Pages File System...
[    5.533359] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.533696] systemd[1]: Started Braille Device Support.
[    5.534283] systemd[1]: Started Read required files in advance.
[    5.535731] systemd[1]: Starting Load Kernel Modules...
[    5.536046] systemd[1]: Starting Uncomplicated firewall...
[    5.536459] systemd[1]: Mounting POSIX Message Queue File System...
[    5.536780] systemd[1]: Starting Journal Service...
[    5.537075] systemd[1]: Starting Set console keymap...
[    5.537164] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    5.945890] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.960274] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.092784] lp: driver loaded but no devices found
[    6.124958] systemd[1]: Started Journal Service.
[    6.151195] ppdev: user-space parallel port driver
[    7.800162] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    7.800445] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[    7.800451] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    7.800595] nouveau 0000:01:00.0: DRM: suspending console...
[    7.800598] nouveau 0000:01:00.0: DRM: suspending display...
[    7.800610] nouveau 0000:01:00.0: DRM: evicting buffers...
[    7.800612] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[    7.800667] nouveau 0000:01:00.0: DRM: suspending client object trees...
[    7.800808] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[    8.914645] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    9.410162] systemd-journald[280]: Received request to flush runtime journal from PID 1
[    9.612132] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.675211] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[    9.675219] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.675223] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[    9.675227] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[    9.675231] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.675233] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[    9.675237] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[    9.675240] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.675242] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[    9.675246] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[    9.675249] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.675251] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.834050] AVX version of gcm_enc/dec engaged.
[    9.834052] AES CTR mode by8 optimization enabled
[    9.967962] Bluetooth: Core ver 2.21
[    9.967976] NET: Registered protocol family 31
[    9.967977] Bluetooth: HCI device and connection manager initialized
[    9.967980] Bluetooth: HCI socket layer initialized
[    9.967982] Bluetooth: L2CAP socket layer initialized
[    9.967986] Bluetooth: SCO socket layer initialized
[   10.232585] usbcore: registered new interface driver btusb
[   10.322504] usbcore: registered new interface driver ath3k
[   10.737498] intel_rapl: Found RAPL domain package
[   10.737501] intel_rapl: Found RAPL domain core
[   10.737502] intel_rapl: Found RAPL domain uncore
[   10.737507] intel_rapl: RAPL package 0 domain package locked by BIOS
[   10.871798] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.871801] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.871802] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   10.871804] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   10.871805] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   10.871806] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   10.871807] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   10.883208] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.883285] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.883354] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.052533] asus_wmi: ASUS WMI generic driver loaded
[   11.126665] asus_wmi: Initialization: 0x1
[   11.126699] asus_wmi: BIOS WMI version: 7.8
[   11.126726] asus_wmi: SFUN value: 0x4a0077
[   11.127197] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input13
[   11.127595] asus_wmi: Number of fans: 0
[   11.290920] ath: phy0: Disable PLL PowerSave
[   11.299342] ath: phy0: ASPM enabled: 0x43
[   11.299344] ath: EEPROM regdomain: 0x60
[   11.299345] ath: EEPROM indicates we should expect a direct regpair map
[   11.299346] ath: Country alpha2 being used: 00
[   11.299347] ath: Regpair used: 0x60
[   11.412124] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.412441] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90001100000, irq=17
[   11.626123] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[   12.329836] cfg80211: World regulatory domain updated:
[   12.329841] cfg80211:  DFS Master region: unset
[   12.329841] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.329844] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.329845] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.329846] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   12.329848] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   12.329849] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   12.329850] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   12.329851] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   12.329852] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   14.368349] audit: type=1400 audit(1495975695.326:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=755 comm="apparmor_parser"
[   14.369843] audit: type=1400 audit(1495975695.326:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=757 comm="apparmor_parser"
[   14.369849] audit: type=1400 audit(1495975695.326:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=757 comm="apparmor_parser"
[   14.398586] audit: type=1400 audit(1495975695.354:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=765 comm="apparmor_parser"
[   14.534703] audit: type=1400 audit(1495975695.490:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=758 comm="apparmor_parser"
[   14.534919] audit: type=1400 audit(1495975695.490:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=767 comm="apparmor_parser"
[   14.536348] audit: type=1400 audit(1495975695.494:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=752 comm="apparmor_parser"
[   14.536352] audit: type=1400 audit(1495975695.494:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=752 comm="apparmor_parser"
[   14.536356] audit: type=1400 audit(1495975695.494:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=752 comm="apparmor_parser"
[   14.536359] audit: type=1400 audit(1495975695.494:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=752 comm="apparmor_parser"
[   15.278143] Adding 4075516k swap on /dev/sda5.  Priority:-1 extents:1 across:4075516k FS
[   15.580105] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   15.729553] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   15.729561] nouveau 0000:01:00.0: DRM: resuming display...
[   15.729578] nouveau 0000:01:00.0: DRM: resuming console...
[   17.761871] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.761874] Bluetooth: BNEP filters: protocol multicast
[   17.761879] Bluetooth: BNEP socket layer initialized
[   22.218570] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   22.233349] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   22.236776] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   22.613502] r8169 0000:02:00.0 enp2s0: link down
[   22.613568] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   23.801772] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   25.696081] wlp3s0: authenticate with 42:03:81:d1:d4:50
[   25.717689] wlp3s0: send auth to 42:03:81:d1:d4:50 (try 1/3)
[   25.719604] wlp3s0: authenticated
[   25.723201] wlp3s0: associate with 42:03:81:d1:d4:50 (try 1/3)
[   25.732508] wlp3s0: RX AssocResp from 42:03:81:d1:d4:50 (capab=0x411 status=0 aid=3)
[   25.732618] wlp3s0: associated
[   25.732628] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   28.895987] Bluetooth: RFCOMM TTY layer initialized
[   28.895995] Bluetooth: RFCOMM socket layer initialized
[   28.895999] Bluetooth: RFCOMM ver 1.11
[   39.050697] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 2.
[   39.050711] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000042 66000106 
[   68.800637] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 2.
[   68.800658] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000042 66000106 
[   98.842008] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 2.
[   98.842019] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000042 66000106 
[   98.842035] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device

Commande lsusb (sans ou avec l'appui sur la combinaison de touche identique) :

Bus 002 Device 003: ID 15d9:0a4d Trust International B.V. Optical Mouse
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 13d3:3362 IMC Networks Atheros AR3012 Bluetooth 4.0 Adapter
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Asus-G74Sx
SSD Sandsik 1 Tera
Ubuntu 20.04.1 LTS

Hors ligne

#13 Le 28/05/2017, à 16:02

abelthorne

Re : Webcam intégré non reconnu par "Skype" & "Cheese"

Là, ça confirme juste qu'il n'y a vraiment aucune webcam de détectée...

Hors ligne

#14 Le 28/05/2017, à 16:19

xubu1957

Re : Webcam intégré non reconnu par "Skype" & "Cheese"

MicP a écrit :

Regarde si tu n'a pas la web cam désactivée dans les paramètres du BIOS de ta machine.

Dans cette discussion pour un autre modèle ASUS : Résolu - Webcam sur netbook Eee PC 901, Lubuntu 14.04.3


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne