Pages : 1
#1 Le 18/07/2017, à 20:52
- Nasca
Xubuntu lent au démarrage
Bonjour,
J'ai installé Xubuntu 32-bit sur un vieux pc (windows XP). Le démarrage est assez lent. L'écran s’éteint 3 fois avant de s'allumer et de charger xubuntu.
A part cela, tout fonctionne. J'ai utilisé l'outil bisnext pour essayer de comprendre. Il m'indique qu'il faut vérifier les fichiers de /dev/sda1. Je l'ai fait via fsck. Aucun problème.
Je ne vois pas d'où vient le soucis. Pourquoi bisnext m'indique ce message ?
Voilà les partis Hardware and System Summary, Boot Information Details et Drive/Partition Info du fichier bisnext.
=== Hints ===
None
bisnext 0.1
WARNING !!!
The filesystem in the following devices is inconsistent and needs a filesystem check !!!
/dev/sda1
============================ Hardware and System Summary ======================
System: Kernel: 4.8.0-58-generic i686 (32 bit gcc: 5.4.0)
Desktop: Xfce 4.12.3 (Gtk 2.24.28) dm: lightdm
Distro: Ubuntu 16.04.2 LTS
Machine: Device: desktop System: HP Pavilion 061 product: RF770AA-ABF a1604.fr v: 0nx0114RE101ASTE300
Mobo: ECS model: Asterope3 v: 1.0
BIOS: American Megatrends v: 3.19 date: 09/06/2006
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Single core Intel Pentium 4 (-HT-) cache: 1024 KB
flags: (lm nx pae sse sse2 sse3) bmips: 6131
clock speeds: max: 3065 MHz 1: 3065 MHz 2: 3065 MHz
Memory: Array-1 capacity: 1 GB devices: 2 EC: None
Device-1: DIMM0 size: No Module Installed type: N/A
Device-2: DIMM1 size: 1 GB speed: N/A type: DDR2
manufacturer: N/A part: N/A
Graphics: Card: Advanced Micro Devices [AMD/ATI] RC410 [Radeon Xpress 200/1100]
bus-ID: 01:05.0 chip-ID: 1002:5a61
Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
Resolution: 1024x768@75.03hz
OpenGL: renderer: Gallium 0.4 on ATI RC410
version: 2.1 Mesa 12.0.6 Direct Render: Yes
Audio: Card Advanced Micro Devices [AMD/ATI] IXP SB4x0 High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:14.2 chip-ID: 1002:437b
Sound: Advanced Linux Sound Architecture v: k4.8.0-58-generic
Network: Card: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
driver: 8139too v: 0.9.28 port: e800
bus-ID: 02:05.0 chip-ID: 10ec:8139
IF: enp2s5 state: unknown speed: 100 Mbps duplex: full
mac: <filter>
Drives: HDD Total Size: 250.1GB (2.9% used)
ID-1: /dev/sda model: WDC_WD2500JS size: 250.1GB
temp: 31C
Optical-1: /dev/sr0 model: TSST CD/DVDW TS-H652L
rev: 0603 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 40x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 227G used: 4.8G (3%) fs: ext4 dev: /dev/dm-0
label: N/A uuid: 6dbec53f-8c33-44f3-b7f5-b03913cd6001
ID-2: /boot size: 472M used: 111M (25%) fs: ext2 dev: /dev/sda1
label: N/A uuid: 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
ID-3: swap-1 size: 2.08GB used: 0.00GB (0%) fs: swap dev: /dev/dm-1
label: N/A uuid: baed4c80-4282-41ee-bb8d-e247db33ed36
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
deb http://archive.canonical.com/ubuntu xenial partner
deb-src http://archive.canonical.com/ubuntu xenial partner
deb http://security.ubuntu.com/ubuntu xenial-security main restricted
deb http://security.ubuntu.com/ubuntu xenial-security universe
deb http://security.ubuntu.com/ubuntu xenial-security multiverse
deb http://archive.canonical.com/ xenial partner
deb-src http://archive.canonical.com/ xenial partner
Active apt sources in file: /etc/apt/sources.list.d/mozillateam-ubuntu-firefox-next-xenial.list
deb http://ppa.launchpad.net/mozillateam/firefox-next/ubuntu xenial main
Processes: CPU: % used - Memory: MB / % used - top 5 active
1: cpu: 3.5% command: Xorg pid: 1073 mem: 39.13MB (4.1%)
2: cpu: 2.8% command: init pid: 1 mem: 4.87MB (0.5%)
3: cpu: 2.5% command: blueman-applet (started by: python3) pid: 1566 mem: 44.16MB (4.7%)
4: cpu: 2.0% command: plank pid: 1549 mem: 28.75MB (3.0%)
5: cpu: 1.9% command: applet.py (started by: python3) pid: 1551 mem: 24.00MB (2.5%)
Info: Processes: 202 Uptime: 1 min Memory: 273.2/934.7MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481 running in bash) inxi: 2.3.23
_______________________________ UEFI settings _________________________________
Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.
Secure Boot disabled or not available on this system.
========================= Boot Information Details ============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext2
Boot sector type:
Boot sector info:
Operating System:
Boot files: /grub/grub.cfg /grub/i386-pc/core.img
xubuntu-vg-root: _______________________________________________________________
File system: ext4
Boot sector type:
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /etc/fstab /etc/default/grub
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disque /dev/sda : 232,9 GiB, 250059350016 octets, 488397168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 999,423 997,376 83 Linux
/dev/sda2 1,001,470 488,396,799 487,395,330 5 Extended
/dev/sda5 1,001,472 488,396,799 487,395,328 8e Linux LVM
Hors ligne
#2 Le 18/07/2017, à 22:26
- moko138
Re : Xubuntu lent au démarrage
Soit tu désires trouver seul diagnostic et remède,
alors tu peux couper tout, à ta guise ;
soit tu sollicites l'aide d'un forum,
alors tu évites de couper dans le rapport justement conçu pour donner à tes dépanneurs une vue d'ensemble.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#3 Le 18/07/2017, à 23:26
- Nasca
Re : Xubuntu lent au démarrage
ah j'avais cru lire qu'il ne fallait pas tout mettre. Uniquement ce qui est "important".
Voilà le rapport complet.
Jul 18, 2017, bisnext report id 9de76
=== Hints ===
None
bisnext 0.1
WARNING !!!
The filesystem in the following devices is inconsistent and needs a filesystem check !!!
/dev/sda1
============================ Hardware and System Summary ======================
System: Kernel: 4.8.0-58-generic i686 (32 bit gcc: 5.4.0)
Desktop: Xfce 4.12.3 (Gtk 2.24.28) dm: lightdm
Distro: Ubuntu 16.04.2 LTS
Machine: Device: desktop System: HP Pavilion 061 product: RF770AA-ABF a1604.fr v: 0nx0114RE101ASTE300
Mobo: ECS model: Asterope3 v: 1.0
BIOS: American Megatrends v: 3.19 date: 09/06/2006
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Single core Intel Pentium 4 (-HT-) cache: 1024 KB
flags: (lm nx pae sse sse2 sse3) bmips: 6131
clock speeds: max: 3065 MHz 1: 3065 MHz 2: 3065 MHz
Memory: Array-1 capacity: 1 GB devices: 2 EC: None
Device-1: DIMM0 size: No Module Installed type: N/A
Device-2: DIMM1 size: 1 GB speed: N/A type: DDR2
manufacturer: N/A part: N/A
Graphics: Card: Advanced Micro Devices [AMD/ATI] RC410 [Radeon Xpress 200/1100]
bus-ID: 01:05.0 chip-ID: 1002:5a61
Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
Resolution: 1024x768@75.03hz
OpenGL: renderer: Gallium 0.4 on ATI RC410
version: 2.1 Mesa 12.0.6 Direct Render: Yes
Audio: Card Advanced Micro Devices [AMD/ATI] IXP SB4x0 High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:14.2 chip-ID: 1002:437b
Sound: Advanced Linux Sound Architecture v: k4.8.0-58-generic
Network: Card: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
driver: 8139too v: 0.9.28 port: e800
bus-ID: 02:05.0 chip-ID: 10ec:8139
IF: enp2s5 state: unknown speed: 100 Mbps duplex: full
mac: <filter>
Drives: HDD Total Size: 250.1GB (2.9% used)
ID-1: /dev/sda model: WDC_WD2500JS size: 250.1GB
temp: 31C
Optical-1: /dev/sr0 model: TSST CD/DVDW TS-H652L
rev: 0603 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 40x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 227G used: 4.8G (3%) fs: ext4 dev: /dev/dm-0
label: N/A uuid: 6dbec53f-8c33-44f3-b7f5-b03913cd6001
ID-2: /boot size: 472M used: 111M (25%) fs: ext2 dev: /dev/sda1
label: N/A uuid: 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
ID-3: swap-1 size: 2.08GB used: 0.00GB (0%) fs: swap dev: /dev/dm-1
label: N/A uuid: baed4c80-4282-41ee-bb8d-e247db33ed36
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
deb http://archive.canonical.com/ubuntu xenial partner
deb-src http://archive.canonical.com/ubuntu xenial partner
deb http://security.ubuntu.com/ubuntu xenial-security main restricted
deb http://security.ubuntu.com/ubuntu xenial-security universe
deb http://security.ubuntu.com/ubuntu xenial-security multiverse
deb http://archive.canonical.com/ xenial partner
deb-src http://archive.canonical.com/ xenial partner
Active apt sources in file: /etc/apt/sources.list.d/mozillateam-ubuntu-firefox-next-xenial.list
deb http://ppa.launchpad.net/mozillateam/firefox-next/ubuntu xenial main
Processes: CPU: % used - Memory: MB / % used - top 5 active
1: cpu: 3.5% command: Xorg pid: 1073 mem: 39.13MB (4.1%)
2: cpu: 2.8% command: init pid: 1 mem: 4.87MB (0.5%)
3: cpu: 2.5% command: blueman-applet (started by: python3) pid: 1566 mem: 44.16MB (4.7%)
4: cpu: 2.0% command: plank pid: 1549 mem: 28.75MB (3.0%)
5: cpu: 1.9% command: applet.py (started by: python3) pid: 1551 mem: 24.00MB (2.5%)
Info: Processes: 202 Uptime: 1 min Memory: 273.2/934.7MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481 running in bash) inxi: 2.3.23
_______________________________ UEFI settings _________________________________
Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
None
========================= Boot Information Details ============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext2
Boot sector type:
Boot sector info:
Operating System:
Boot files: /grub/grub.cfg /grub/i386-pc/core.img
xubuntu-vg-root: _______________________________________________________________
File system: ext4
Boot sector type:
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /etc/fstab /etc/default/grub
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disque /dev/sda : 232,9 GiB, 250059350016 octets, 488397168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 999,423 997,376 83 Linux
/dev/sda2 1,001,470 488,396,799 487,395,330 5 Extended
/dev/sda5 1,001,472 488,396,799 487,395,328 8e Linux LVM
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/mapper/xubuntu--vg-root 6dbec53f-8c33-44f3-b7f5-b03913cd6001 ext4
/dev/mapper/xubuntu--vg-swap_1 baed4c80-4282-41ee-bb8d-e247db33ed36 swap
/dev/sda1 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a ext2
/dev/sda5 iB1Uxi-15wA-3BuN-vqyq-x23t-981h-ldS41K LVM2_member
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 Jul 18 20:04 ata-TSSTcorpCD_DVDW_TS-H652L -> ../../sr0
lrwxrwxrwx 1 root root 9 Jul 18 20:04 ata-WDC_WD2500JS-60NCB1_WD-WCANK7132308 -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 18 20:05 ata-WDC_WD2500JS-60NCB1_WD-WCANK7132308-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 18 20:04 ata-WDC_WD2500JS-60NCB1_WD-WCANK7132308-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jul 18 20:04 ata-WDC_WD2500JS-60NCB1_WD-WCANK7132308-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Jul 18 20:04 dm-name-xubuntu--vg-root -> ../../dm-0
lrwxrwxrwx 1 root root 10 Jul 18 20:04 dm-name-xubuntu--vg-swap_1 -> ../../dm-1
lrwxrwxrwx 1 root root 10 Jul 18 20:04 dm-uuid-LVM-6T1hn0kEwUVZ12RxtF18uGcjfs5tNZAeUcbGaVtJWJMLG11pfcALGVLk37uEWLMO -> ../../dm-0
lrwxrwxrwx 1 root root 10 Jul 18 20:04 dm-uuid-LVM-6T1hn0kEwUVZ12RxtF18uGcjfs5tNZAedkbFw2YgF29fQGLMSVZiFh2iuHGXfMP3 -> ../../dm-1
lrwxrwxrwx 1 root root 10 Jul 18 20:04 lvm-pv-uuid-iB1Uxi-15wA-3BuN-vqyq-x23t-981h-ldS41K -> ../../sda5
lrwxrwxrwx 1 root root 9 Jul 18 20:04 usb-Generic_USB_CF_Reader_058F312D81B-0:1 -> ../../sdc
lrwxrwxrwx 1 root root 9 Jul 18 20:04 usb-Generic_USB_MS_Reader_058F312D81B-0:3 -> ../../sde
lrwxrwxrwx 1 root root 9 Jul 18 20:04 usb-Generic_USB_SD_Reader_058F312D81B-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 9 Jul 18 20:04 usb-Generic_USB_SM_Reader_058F312D81B-0:2 -> ../../sdd
_________________________ "ls -R /dev/mapper/" output _________________________
xubuntu--vg-root
xubuntu--vg-swap_1
_________________________=== Boot Files Contents ===___________________________
_____________________________ sda1/grub/grub.cfg: ______________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod lvm
insmod ext2
set root='lvmid/6T1hn0-kEwU-VZ12-RxtF-18uG-cjfs-5tNZAe/UcbGaV-tJWJ-MLG1-1pfc-ALGV-Lk37-uEWLMO'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='lvmid/6T1hn0-kEwU-VZ12-RxtF-18uG-cjfs-5tNZAe/UcbGaV-tJWJ-MLG1-1pfc-ALGV-Lk37-uEWLMO' 6dbec53f-8c33-44f3-b7f5-b03913cd6001
else
search --no-floppy --fs-uuid --set=root 6dbec53f-8c33-44f3-b7f5-b03913cd6001
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-6dbec53f-8c33-44f3-b7f5-b03913cd6001' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
else
search --no-floppy --fs-uuid --set=root 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
fi
linux /vmlinuz-4.8.0-58-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash $vt_handoff
initrd /initrd.img-4.8.0-58-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-6dbec53f-8c33-44f3-b7f5-b03913cd6001' {
menuentry 'Ubuntu, avec Linux 4.8.0-58-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-advanced-6dbec53f-8c33-44f3-b7f5-b03913cd6001' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
else
search --no-floppy --fs-uuid --set=root 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
fi
echo 'Chargement de Linux 4.8.0-58-generic…'
linux /vmlinuz-4.8.0-58-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-58-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-init-upstart-6dbec53f-8c33-44f3-b7f5-b03913cd6001' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
else
search --no-floppy --fs-uuid --set=root 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
fi
echo 'Chargement de Linux 4.8.0-58-generic…'
linux /vmlinuz-4.8.0-58-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-58-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-recovery-6dbec53f-8c33-44f3-b7f5-b03913cd6001' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
else
search --no-floppy --fs-uuid --set=root 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
fi
echo 'Chargement de Linux 4.8.0-58-generic…'
linux /vmlinuz-4.8.0-58-generic root=/dev/mapper/xubuntu--vg-root ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, avec Linux 4.8.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-36-generic-advanced-6dbec53f-8c33-44f3-b7f5-b03913cd6001' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
else
search --no-floppy --fs-uuid --set=root 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
fi
echo 'Chargement de Linux 4.8.0-36-generic…'
linux /vmlinuz-4.8.0-36-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.8.0-36-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-36-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-36-generic-init-upstart-6dbec53f-8c33-44f3-b7f5-b03913cd6001' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
else
search --no-floppy --fs-uuid --set=root 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
fi
echo 'Chargement de Linux 4.8.0-36-generic…'
linux /vmlinuz-4.8.0-36-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.8.0-36-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-36-generic-recovery-6dbec53f-8c33-44f3-b7f5-b03913cd6001' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
else
search --no-floppy --fs-uuid --set=root 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
fi
echo 'Chargement de Linux 4.8.0-36-generic…'
linux /vmlinuz-4.8.0-36-generic root=/dev/mapper/xubuntu--vg-root ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /initrd.img-4.8.0-36-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
else
search --no-floppy --fs-uuid --set=root 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
fi
knetbsd /memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
else
search --no-floppy --fs-uuid --set=root 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a
fi
linux16 /memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
___________________ xubuntu-vg-root/etc/fstab, Legacy mode: ____________________
/dev/mapper/xubuntu--vg-root / ext4 errors=remount-ro 0 1
UUID=7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a /boot ext2 defaults 0 2
/dev/mapper/xubuntu--vg-swap_1 none swap sw 0 0
______________________ xubuntu-vg-root/etc/default/grub: _______________________
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
_________ Devices which don't seem to have a corresponding hard drive: _________
sdb sdc sdd sde
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/vmlinuz-4.8.0-58-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash vt.handoff=7
______________________________ Boot-up Statistics ______________________________
Startup finished in 9.778s (kernel) + 36.416s (userspace) = 46.195s
blame, first 5:
dev-mapper-xubuntu\x2d\x2dvg\x2droot.device 11.564s
NetworkManager-wait-online.service 6.524s
systemd-udev-settle.service 6.400s
ufw.service 5.400s
lvm2-activation-net.service 4.382s
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 934M 236M 263M 9.8M 434M 543M
Swap: 1.9G 0B 1.9G
Swappiness = 5
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/mapper/xubuntu--vg-root / ext4 227G 4.8G 211G 3% 2%
/dev/sda1 /boot ext2 472M 111M 337M 25% 1%
Swap partition for hibernation : UUID=baed4c80-4282-41ee-bb8d-e247db33ed36
_______________________________ Wireless Status _______________________________
None
_______________________________ Modules Loaded _______________________________
Excerpt:
ati_agp 16384 0
drm 311296 6 radeon,ttm,drm_kms_helper
drm_kms_helper 155648 1 radeon
i2c_algo_bit 16384 1 radeon
pata_atiixp 16384 0
radeon 1470464 3
ttm 94208 1 radeon
______________________________ Additional Drivers _____________________________
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
_____________________________ Upgradable Packages _____________________________
evince 3.18.2-1ubuntu4.1 from:3.18.2-1ubuntu4
evince-common 3.18.2-1ubuntu4.1 from:3.18.2-1ubuntu4
firefox 55.0~b10+build1-0ubuntu0.16.04.1 from:55.0~b8+build1-0ubuntu0.16.04.1
firefox-locale-en 55.0~b10+build1-0ubuntu0.16.04.1 from:55.0~b8+build1-0ubuntu0.16.04.1
firefox-locale-fr 55.0~b10+build1-0ubuntu0.16.04.1 from:55.0~b8+build1-0ubuntu0.16.04.1
libasn1-8-heimdal 1.7~git20150920+dfsg-4ubuntu1.16.04.1 from:1.7~git20150920+dfsg-4ubuntu1
libepoxy0 1.3.1-1ubuntu0.16.04.2 from:1.3.1-1ubuntu0.16.04.1
libevdocument3-4 3.18.2-1ubuntu4.1 from:3.18.2-1ubuntu4
libevview3-3 3.18.2-1ubuntu4.1 from:3.18.2-1ubuntu4
libgssapi3-heimdal 1.7~git20150920+dfsg-4ubuntu1.16.04.1 from:1.7~git20150920+dfsg-4ubuntu1
libhcrypto4-heimdal 1.7~git20150920+dfsg-4ubuntu1.16.04.1 from:1.7~git20150920+dfsg-4ubuntu1
libheimbase1-heimdal 1.7~git20150920+dfsg-4ubuntu1.16.04.1 from:1.7~git20150920+dfsg-4ubuntu1
libheimntlm0-heimdal 1.7~git20150920+dfsg-4ubuntu1.16.04.1 from:1.7~git20150920+dfsg-4ubuntu1
libhx509-5-heimdal 1.7~git20150920+dfsg-4ubuntu1.16.04.1 from:1.7~git20150920+dfsg-4ubuntu1
libkrb5-26-heimdal 1.7~git20150920+dfsg-4ubuntu1.16.04.1 from:1.7~git20150920+dfsg-4ubuntu1
libroken18-heimdal 1.7~git20150920+dfsg-4ubuntu1.16.04.1 from:1.7~git20150920+dfsg-4ubuntu1
libsmbclient 2:4.3.11+dfsg-0ubuntu0.16.04.9 from:2:4.3.11+dfsg-0ubuntu0.16.04.8
libthunarx-2-0 1.6.11-0ubuntu0.16.04.2 from:1.6.11-0ubuntu0.16.04.1
libwbclient0 2:4.3.11+dfsg-0ubuntu0.16.04.9 from:2:4.3.11+dfsg-0ubuntu0.16.04.8
libwind0-heimdal 1.7~git20150920+dfsg-4ubuntu1.16.04.1 from:1.7~git20150920+dfsg-4ubuntu1
samba-libs 2:4.3.11+dfsg-0ubuntu0.16.04.9 from:2:4.3.11+dfsg-0ubuntu0.16.04.8
thunar 1.6.11-0ubuntu0.16.04.2 from:1.6.11-0ubuntu0.16.04.1
thunar-data 1.6.11-0ubuntu0.16.04.2 from:1.6.11-0ubuntu0.16.04.1
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
The following package was automatically installed and is no longer required:
snap-confine
Use 'sudo apt autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 23 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version Status
linux-generic-hwe-16.04 4.8.0.58.29 [installed]
linux-headers-4.8.0-36 4.8.0-36.36~16.04.1 [installed,automatic]
linux-headers-4.8.0-36-generic 4.8.0-36.36~16.04.1 [installed,automatic]
linux-headers-4.8.0-58 4.8.0-58.63~16.04.1 [installed,automatic]
linux-headers-4.8.0-58-generic 4.8.0-58.63~16.04.1 [installed,automatic]
linux-headers-generic-hwe-16.04 4.8.0.58.29 [installed,automatic]
linux-hwe-edge-tools-4.10.0-26 4.10.0-26.30~16.04.1 [installed,automatic]
linux-image-4.8.0-36-generic 4.8.0-36.36~16.04.1 [installed,automatic]
linux-image-4.8.0-58-generic 4.8.0-58.63~16.04.1 [installed,automatic]
linux-image-extra-4.8.0-36-generic 4.8.0-36.36~16.04.1 [installed,automatic]
linux-image-extra-4.8.0-58-generic 4.8.0-58.63~16.04.1 [installed,automatic]
linux-image-generic-hwe-16.04 4.8.0.58.29 [installed,automatic]
linux-tools-4.10.0-26-generic 4.10.0-26.30~16.04.1 [installed,automatic]
linux-tools-common 4.4.0-83.106 [installed,automatic]
linux-tools-virtual-hwe-16.04-edge 4.10.0.26.19 [installed,automatic]
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.082907] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.124223] ACPI Error: Method parse/execution failed [\_PR.CPU1._PDC] (Node f6c84be8), AE_INVALID_TABLE_LENGTH (20160422/psparse-542)
[ 0.124354] ACPI Error: Method parse/execution failed [\_PR.CPU2._PDC] (Node f6c844e0), AE_INVALID_TABLE_LENGTH (20160422/psparse-542)
[ 0.129942] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.145309] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.145817] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[ 1.951018] x86/mm: Checked W+X mappings: FAILED, 96 W+X pages found.
[ 19.431661] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 49.580136] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 49.584135] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 49.590133] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 49.594139] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 66.643917] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 66.649771] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 67.007061] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[ 67.022680] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
_____________________________________ Xorg ____________________________________
Partial log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 41.469] (--) PCI:*(0:1:5:0) 1002:5a61:103c:2a3d rev 0, Mem @ 0xd0000000/268435456, 0xfeaf0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-58-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-58-generic/updates/dkms
Is radeon loaded? yes
Vendor/Device Id: 1002:5a61
BusID "PCI:1@0:5:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "radeon"
Found "/dev/dri/card0", driven by "radeon"
output 0:
card0-VGA-1
Number of connected outputs for /dev/dri/card0: 1
Skipping "/dev/dri/card0", driven by "radeon"
Skipping "/dev/dri/card0", driven by "radeon"
last cards number = 1
Has amd? yes
How many cards? 1
main_arch_path i386-linux-gnu, other_arch_path x86_64-linux-gnu
Current alternative: /usr/lib/i386-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/i386-linux-gnu/mesa-egl/ld.so.conf
Is mesa enabled? yes
Is mesa egl enabled? yes
Is mesa available? yes
Is mesa egl available? yes
Single card detected
Kernel Module is not loaded
Nothing to do
No change - nothing to do
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.8.0-58-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE Serial ATA
Device Model: WDC WD2500JS-60NCB1
Firmware Version: 10.02E02
User Capacity: 250 059 350 016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Tue Jul 18 20:06:50 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
3 Spin_Up_Time PO---- 214 184 021 - 4300
4 Start_Stop_Count -O--CK 091 091 000 - 9998
9 Power_On_Hours -O--CK 084 084 000 - 12199
12 Power_Cycle_Count -O--CK 091 091 000 - 9946
190 Airflow_Temperature_Cel -O---K 069 042 045 Past 31
194 Temperature_Celsius -O---K 119 092 000 - 31
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 5
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
### USB disks: sdb sdc sdd sde
# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.8.0-58-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
# Drive sdc:
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.8.0-58-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
# Drive sdd:
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.8.0-58-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
# Drive sde:
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.8.0-58-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
Hors ligne
#4 Le 19/07/2017, à 07:11
- malbo
Re : Xubuntu lent au démarrage
Bonjour,
Dans le rapport, dans la partie "System Logs", on voit plusieurs lignes :
logitech-hidpp-device 0003:046D:402D.0004: error in parameter
Tu utilises une souris sans fil ?
EDIT : s'agissant du message :
WARNING !!!
The filesystem in the following devices is inconsistent and needs a filesystem check !!!
/dev/sda1
Je suppose que c'est un bug de Bisnext parce que cette partition sda1 est parfaitement lisible. La partie "sda1/grub/grub.cfg" du rapport le prouve : si le système de fichiers de cette partition était défectueux, le fichier grub.cfg qui se trouve sur cette partition serait illisible.
Dernière modification par malbo (Le 19/07/2017, à 08:24)
Hors ligne
#5 Le 19/07/2017, à 09:06
- tarkan99
Re : Xubuntu lent au démarrage
Hello,
Pour un vieux PC, je conseille également un test de la RAM via MEMTEST (accessible au menu grub, à afficher si besoin en appuyant sur Maj au démarrage du PC).
1go de RAM : pas un peu juste pour xubuntu ? après ça n'explique pas les problèmes de démarrage.
xubuntu 22.04.1 sur machine assemblée base de Core i5 9400
Hors ligne
#6 Le 19/07/2017, à 09:37
- Bougron
Re : Xubuntu lent au démarrage
Bonjour.
On voit d'ailleur le dérapage dans cette liste.
sda1: __________________________________________________________________________
File system: ext2
Boot sector type:
Boot sector info:
Operating System:
Boot files: /grub/grub.cfg /grub/i386-pc/core.img
xubuntu-vg-root: _______________________________________________________________
File system: ext4
Boot sector type:
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /etc/fstab /etc/default/grub
et aussi
dev/sda1 7c5a17e6-50ba-47b3-9a9d-0ecab8dee61a ext2
Dernière modification par Bougron (Le 19/07/2017, à 09:41)
Hors ligne
#7 Le 19/07/2017, à 15:10
- moko138
Re : Xubuntu lent au démarrage
On voit rarement la ligne 190 de l'état smart :
190 Temperature Difference or Airflow Temperature
Value is equal to (100-temp. °C), allowing manufacturer to set a minimum threshold which corresponds to a maximum temperature. This also follows the convention of 100 being a best-case value and lower values being undesirable. However, some older drives may instead report raw Temperature (identical to 0xC2 [soit 194] ) or Temperature minus 50 here.
mais ce WD Caviar a franchi son seuil ("threshold") de 55°C (=100-"45") :
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
190 Airflow_Temperature_Cel -O---K 069 042 045 Past 31
avec un pire ('worst") de 58°C (=100-"42") pendant un certain temps... temps probablement lui-même excessif.
- -
1) les sdb, sdc, sdd et sde :
est-ce un lecteur de cartes intégré et vide ? Ou démarres-tu avec 4 supports externes branchés ?
2) Peux-tu donner, seul mais complet, le retour de
sudo smartctl -s on -a /dev/sda
?
Merci !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#8 Le 20/07/2017, à 20:53
- Nasca
Re : Xubuntu lent au démarrage
@malbo en effet, j’utilise une souris sans fil.
@tarkan99 je sais qu’un Go de Ram c’est un peu juste pour Xubuntu. Seulement, j’ai installé Lubuntu sur le pc d’une de mes tantes, elle a détesté. Xubuntu est plus user-friendly (enfin je trouve). De plus, ce pc est destiné à quelqu’un qui veut juste aller sur internet.
@moko138 J’ai du changé le ventirad d’origine. Il faisait énormément de bruit.
1) le pc possède plusieurs lecteurs de cartes intégrés qui sont vides. Aucun support externe n’est branché quand je démarre ce pc.
2) Voilà le retour complet (;)) de la commande
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.8.0-58-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE Serial ATA
Device Model: WDC WD2500JS-60NCB1
Serial Number: WD-WCANK7132308
Firmware Version: 10.02E02
User Capacity: 250 059 350 016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Thu Jul 20 20:03:25 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7680) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 90) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 213 184 021 Pre-fail Always - 4308
4 Start_Stop_Count 0x0032 090 090 000 Old_age Always - 10001
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 12199
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 091 091 000 Old_age Always - 9949
190 Airflow_Temperature_Cel 0x0022 075 042 045 Old_age Always In_the_past 25
194 Temperature_Celsius 0x0022 125 092 000 Old_age Always - 25
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 5
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short captive Completed without error 00% 12199 -
# 2 Conveyance offline Completed without error 00% 5541 -
# 3 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
De temps en temps, quand je démarre le pc, il y a un message qui apparaît :
lvmetad is not active yet; using direct activation during sysinit
Apparemment, c'est pas grave.
Hors ligne
#9 Le 20/07/2017, à 21:10
- nam1962
Re : Xubuntu lent au démarrage
Y-a t'il moyen de rajouter un peu de RAM à cet ordi ?
...sinon il faudra mieux (pour le confort et la stabilité) te diriger vers DF Linux, par exemple (même une spartiate Lubuntu sera à l'étroit)
[ Modéré ]
Hors ligne
Pages : 1