#1 Le 08/08/2017, à 06:22
- Petit-Prince75
[Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Bonjour,
Je suis nouveau sur Ubuntu et j'aurais besoin d'assistance.
Suite à un disque dur mort, j'ai décidé d'en racheter un et de migrer sur Ubuntu. J'ai téléchargé la version 16.04LTS. Tout s'est bien passé sauf.. qu'il est impossible de me connecter à internet avec un câble éthernet. Je n'ai pas de carte WiFi sur l'ordinateur. Mais un autre ordinateur sous Windows se connecte en WiFi sur ma box sans problème.
J'ai fouillé les forums en Français et en anglais avant de poster ici. Je me suis aperçu que ma carte realtek nécessitait un firmware que j'ai téléchargé. Mais rien du tout. Lorsque j'utilise la commande nmcli g ça me met : Etat : déconnecté - Connectivité Aucun. Avec nmcli d le périphérique enp3sO type éthernet est indisponible.
Avec Ifconfig je trouve :
enp3s0 Link encap:Ethernet HWaddr **:**:**:**:**:**
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:28 Adresse de base:0x6000
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:65536 Metric:1
Packets reçus:4996 erreurs:0 :0 overruns:0 frame:0
TX packets:14996 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:370384 (370,3 KB) Octets transmis370384 (370,3 KB)Pour ce qui est de cat /etc/network/interfaces:
auto lo
iface lo inet loopbackPlus étrange, j'ai testé :
sudo dhclent et sudo dhclent enp3s0et là... ça ne répond pas pendant plusieurs minutes puis ça se "connecte". Je mets des guillemets car si pour la première fois je vois Etat connecté et que les flèches haut/bas apparaissent en haut à droite de l'écran, lorsque j'ouvre Firefox, rien ne se passe sauf l'éternel message d'erreur. Si je reboot, ça revient à l'état précédent, sans connexion...
Si vous avez une idée, je suis preneur :)
Merci encore !
Modération : merci à l'avenir d'utiliser les balises code (explications ici).
Dernière modification par Petit-Prince75 (Le 20/08/2017, à 03:22)
Hors ligne
#2 Le 08/08/2017, à 21:13
- inbox
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Salut,
Donne le retour de :
lspcidmesgLes retours de commandes sont à coller entre balises code : bouton 
au dessus de la zone de réponse.
A+
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#3 Le 09/08/2017, à 01:47
- Petit-Prince75
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Bonsoir,
Désolé pour les balises !
Voilà le détails des deux commandes.
Depuis hier j'ai réussi à me connecter en empruntant une carte WiFi mais la connexion Ethernet ne marche toujours pas...
LSPCI :
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)
04:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)DMESG :
[ 0.000000] microcode: microcode updated early to revision 0x1c, date = 2015-02-26
[ 0.000000] Linux version 4.10.0-30-generic (buildd@lcy01-17) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #34~16.04.1-Ubuntu SMP Wed Aug 2 02:13:56 UTC 2017 (Ubuntu 4.10.0-30.34~16.04.1-generic 4.10.17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-30-generic.efi.signed root=UUID=a568d0f6-8dfa-49c0-baa6-01fc2188a1f5 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000008ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000090fff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000000091000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cc81efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc81f000-0x00000000ccf1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ccf20000-0x00000000ccf2ffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ccf30000-0x00000000cd052fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cd053000-0x00000000cd77afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cd77b000-0x00000000cd820fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cd821000-0x00000000cd821fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd822000-0x00000000cd864fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cd865000-0x00000000cdc86fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cdc87000-0x00000000cdff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdff4000-0x00000000cdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xccf23000 ACPI 2.0=0xccf23000 SMBIOS=0xcd6e0b98
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8Z77-V LX, BIOS 1502 11/09/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0CF000000 mask FFF000000 uncachable
[ 0.000000] 5 base 21FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] total RAM covered: 7918M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff885500098000] 98000 size 24576
[ 0.000000] BRK [0x14f828000, 0x14f828fff] PGTABLE
[ 0.000000] BRK [0x14f829000, 0x14f829fff] PGTABLE
[ 0.000000] BRK [0x14f82a000, 0x14f82afff] PGTABLE
[ 0.000000] BRK [0x14f82b000, 0x14f82bfff] PGTABLE
[ 0.000000] BRK [0x14f82c000, 0x14f82cfff] PGTABLE
[ 0.000000] BRK [0x14f82d000, 0x14f82dfff] PGTABLE
[ 0.000000] BRK [0x14f82e000, 0x14f82efff] PGTABLE
[ 0.000000] BRK [0x14f82f000, 0x14f82ffff] PGTABLE
[ 0.000000] BRK [0x14f830000, 0x14f830fff] PGTABLE
[ 0.000000] BRK [0x14f831000, 0x14f831fff] PGTABLE
[ 0.000000] BRK [0x14f832000, 0x14f832fff] PGTABLE
[ 0.000000] BRK [0x14f833000, 0x14f833fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x32fb8000-0x357d3fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000CCF23000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CCF23080 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CCF2DCA0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CCF23188 00AB17 (v02 ALASKA A M I 00000022 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CD051080 000040
[ 0.000000] ACPI: APIC 0x00000000CCF2DDB0 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CCF2DE28 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000CCF2DE70 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CCF2DEB0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CCF2DEE8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CCF2E258 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CCF2EC08 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: BGRT 0x00000000CCF2F7B0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DMAR 0x00000000CCF2F6F8 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21fdd0000-0x21fdfafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008ffff]
[ 0.000000] node 0: [mem 0x0000000000091000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.000000] node 0: [mem 0x0000000040005000-0x00000000cc81efff]
[ 0.000000] node 0: [mem 0x00000000cd821000-0x00000000cd821fff]
[ 0.000000] node 0: [mem 0x00000000cd865000-0x00000000cdc86fff]
[ 0.000000] node 0: [mem 0x00000000cdff4000-0x00000000cdffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[ 0.000000] On node 0 totalpages: 2017257
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13034 pages used for memmap
[ 0.000000] DMA32 zone: 834125 pages, LIFO batch:31
[ 0.000000] Normal zone: 18424 pages used for memmap
[ 0.000000] Normal zone: 1179136 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000cf200000-0x00000000df1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x00090fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc81f000-0xccf1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccf20000-0xccf2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccf30000-0xcd052fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd053000-0xcd77afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd77b000-0xcd820fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd822000-0xcd864fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcdc87000-0xcdff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff88571fa00000 s107992 r8192 d31272 u524288
[ 0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1985712
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-30-generic.efi.signed root=UUID=a568d0f6-8dfa-49c0-baa6-01fc2188a1f5 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7778536K/8069028K available (9060K kernel code, 1666K rwdata, 3828K rodata, 2228K init, 2364K bss, 290492K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:524544 nr_irqs:456 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3090.802 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6181.60 BogoMIPS (lpj=12363208)
[ 0.000022] pid_max: default: 32768 minimum: 301
[ 0.000029] ACPI: Core revision 20160930
[ 0.004501] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.004805] Security Framework initialized
[ 0.004806] Yama: becoming mindful.
[ 0.004817] AppArmor: AppArmor initialized
[ 0.005153] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006697] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007393] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.007399] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.007592] CPU: Physical Processor ID: 0
[ 0.007592] CPU: Processor Core ID: 0
[ 0.007596] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.007596] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.007598] mce: CPU supports 9 MCE banks
[ 0.007605] CPU0: Thermal monitoring enabled (TM1)
[ 0.007615] process: using mwait in idle threads
[ 0.007617] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.007618] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.007718] Freeing SMP alternatives memory: 32K
[ 0.011290] ftrace: allocating 34209 entries in 134 pages
[ 0.023392] smpboot: Max logical packages: 1
[ 0.023397] DMAR: Host address width 36
[ 0.023398] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.023403] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.023404] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.023406] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.023407] DMAR: RMRR base: 0x000000ccea2000 end: 0x000000cceb3fff
[ 0.023407] DMAR: RMRR base: 0x000000cf000000 end: 0x000000df1fffff
[ 0.023409] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.023409] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.023410] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.023647] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.023647] x2apic enabled
[ 0.023652] Switched APIC routing to cluster x2apic.
[ 0.024066] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063753] TSC deadline timer enabled
[ 0.063755] smpboot: CPU0: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.063796] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.063814] ... version: 3
[ 0.063814] ... bit width: 48
[ 0.063814] ... generic registers: 8
[ 0.063815] ... value mask: 0000ffffffffffff
[ 0.063815] ... max period: 00007fffffffffff
[ 0.063815] ... fixed-purpose events: 3
[ 0.063816] ... event mask: 00000007000000ff
[ 0.064440] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.064453] smp: Bringing up secondary CPUs ...
[ 0.064512] x86: Booting SMP configuration:
[ 0.064513] .... node #0, CPUs: #1 #2 #3
[ 0.072583] smp: Brought up 1 node, 4 CPUs
[ 0.072585] smpboot: Total of 4 processors activated (24726.41 BogoMIPS)
[ 0.075366] devtmpfs: initialized
[ 0.075417] x86/mm: Memory block size: 128MB
[ 0.077334] evm: security.selinux
[ 0.077335] evm: security.SMACK64
[ 0.077335] evm: security.SMACK64EXEC
[ 0.077335] evm: security.SMACK64TRANSMUTE
[ 0.077336] evm: security.SMACK64MMAP
[ 0.077336] evm: security.ima
[ 0.077336] evm: security.capability
[ 0.077392] PM: Registering ACPI NVS region [mem 0xccf30000-0xcd052fff] (1191936 bytes)
[ 0.077403] PM: Registering ACPI NVS region [mem 0xcd822000-0xcd864fff] (274432 bytes)
[ 0.077439] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.077446] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.077472] pinctrl core: initialized pinctrl subsystem
[ 0.077560] RTC time: 22:18:43, date: 08/08/17
[ 0.077625] NET: Registered protocol family 16
[ 0.091238] cpuidle: using governor ladder
[ 0.107241] cpuidle: using governor menu
[ 0.107243] PCCT header not found.
[ 0.107290] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.107291] ACPI: bus type PCI registered
[ 0.107293] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.107355] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.107357] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.107364] PCI: Using configuration type 1 for base access
[ 0.107485] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.107490] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.123277] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.123440] ACPI: Added _OSI(Module Device)
[ 0.123441] ACPI: Added _OSI(Processor Device)
[ 0.123441] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.123442] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.123581] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.126437] ACPI: Dynamic OEM Table Load:
[ 0.126442] ACPI: SSDT 0xFFFF8857161C1000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.126695] ACPI: Dynamic OEM Table Load:
[ 0.126699] ACPI: SSDT 0xFFFF8857161EE400 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.126885] ACPI: Dynamic OEM Table Load:
[ 0.126888] ACPI: SSDT 0xFFFF8857162EEE00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.127567] ACPI: Interpreter enabled
[ 0.127582] ACPI: (supports S0 S3 S4 S5)
[ 0.127583] ACPI: Using IOAPIC for interrupt routing
[ 0.127600] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.132058] ACPI: Power Resource [FN00] (off)
[ 0.132118] ACPI: Power Resource [FN01] (off)
[ 0.132175] ACPI: Power Resource [FN02] (off)
[ 0.132233] ACPI: Power Resource [FN03] (off)
[ 0.132291] ACPI: Power Resource [FN04] (off)
[ 0.132701] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.132704] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.132863] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.132957] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.132957] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.133256] PCI host bridge to bus 0000:00
[ 0.133258] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.133259] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.133259] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.133260] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.133261] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.133262] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.133263] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.133263] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.133264] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.133265] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.133266] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.133267] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.133268] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.133273] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.133347] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.133372] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.133410] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.133439] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
[ 0.133447] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.133452] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.133455] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.133553] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.133571] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.133636] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.133674] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.133702] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.133720] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1a000-0xf7c1a00f 64bit]
[ 0.133789] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.133858] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.133873] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c18000-0xf7c183ff]
[ 0.133952] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.133999] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.134028] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.134041] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
[ 0.134100] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.134142] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.134169] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.134240] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.134281] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.134313] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.134383] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.134424] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.134451] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[ 0.134521] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.134563] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.134593] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.134609] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c17000-0xf7c173ff]
[ 0.134687] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.134736] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.134764] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[ 0.134917] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.134929] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.134936] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.134942] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.134948] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.134954] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.134960] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c16000-0xf7c167ff]
[ 0.134996] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.135054] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.135067] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c15000-0xf7c150ff 64bit]
[ 0.135086] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.135180] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.135223] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.135293] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.135315] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.135347] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.135367] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.135480] pci 0000:03:00.0: supports D1 D2
[ 0.135481] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.135527] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.147278] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.147282] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.147291] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.147366] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[ 0.147491] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.147513] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.147522] pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.147523] pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.147524] pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.147524] pci 0000:00:1c.5: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.147525] pci 0000:00:1c.5: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 0.147526] pci 0000:00:1c.5: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.147527] pci 0000:00:1c.5: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.147528] pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.147528] pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.147529] pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.147530] pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.147531] pci 0000:00:1c.5: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.147639] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.147660] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.147660] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.147661] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.147662] pci 0000:04:00.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.147663] pci 0000:04:00.0: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 0.147664] pci 0000:04:00.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.147664] pci 0000:04:00.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.147665] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.147666] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.147667] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.147667] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.147668] pci 0000:04:00.0: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.148059] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.148097] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.148133] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.148167] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.148202] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.148239] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.148274] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.148308] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.148488] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.148658] SCSI subsystem initialized
[ 0.148681] libata version 3.00 loaded.
[ 0.148705] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.148706] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.148708] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.148708] vgaarb: loaded
[ 0.148721] ACPI: bus type USB registered
[ 0.148731] usbcore: registered new interface driver usbfs
[ 0.148737] usbcore: registered new interface driver hub
[ 0.148743] usbcore: registered new device driver usb
[ 0.148791] Registered efivars operations
[ 0.156541] PCI: Using ACPI for IRQ routing
[ 0.157952] PCI: pci_cache_line_size set to 64 bytes
[ 0.157991] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.157992] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.157993] e820: reserve RAM buffer [mem 0xcc81f000-0xcfffffff]
[ 0.157994] e820: reserve RAM buffer [mem 0xcd822000-0xcfffffff]
[ 0.157995] e820: reserve RAM buffer [mem 0xcdc87000-0xcfffffff]
[ 0.157995] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[ 0.157996] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[ 0.158064] NetLabel: Initializing
[ 0.158064] NetLabel: domain hash size = 128
[ 0.158065] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.158077] NetLabel: unlabeled traffic allowed by default
[ 0.158146] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.158149] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.160163] clocksource: Switched to clocksource hpet
[ 0.165509] VFS: Disk quotas dquot_6.6.0
[ 0.165524] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.165594] AppArmor: AppArmor Filesystem Enabled
[ 0.165631] pnp: PnP ACPI init
[ 0.165722] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.165725] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.165783] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.165784] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.165785] system 00:01: [io 0xffff] has been reserved
[ 0.165785] system 00:01: [io 0xffff] has been reserved
[ 0.165786] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.165787] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.165788] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.165789] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.165791] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.165810] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.165846] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.165848] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.165909] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.165911] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.165946] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.165948] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166099] pnp 00:06: [dma 0 disabled]
[ 0.166134] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.166288] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.166289] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.166290] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.166291] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.166292] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.166293] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.166294] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.166295] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.166296] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.166297] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.166298] system 00:07: [mem 0xdf200000-0xdf200fff] has been reserved
[ 0.166300] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166405] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[ 0.166406] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[ 0.166407] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.166421] pnp: PnP ACPI: found 9 devices
[ 0.172116] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.172156] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.172165] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.172175] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.172177] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.172182] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.172187] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.172206] pci 0000:00:1c.5: PCI bridge to [bus 04-05]
[ 0.172216] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.172217] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.172218] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.172219] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.172219] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.172220] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.172221] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.172222] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.172223] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.172224] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.172225] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.172225] pci_bus 0000:00: resource 15 [mem 0xdf200000-0xfeafffff window]
[ 0.172227] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.172227] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.172228] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.172229] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.172230] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.172231] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.172232] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.172233] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.172233] pci_bus 0000:04: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.172234] pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.172235] pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.172236] pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.172237] pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.172238] pci_bus 0000:04: resource 15 [mem 0xdf200000-0xfeafffff window]
[ 0.172239] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.172239] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.172240] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.172241] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.172242] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.172243] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.172243] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.172244] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.172245] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.172246] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.172247] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.172247] pci_bus 0000:05: resource 15 [mem 0xdf200000-0xfeafffff window]
[ 0.172311] NET: Registered protocol family 2
[ 0.172423] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.172517] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.172632] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.172648] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.172668] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.172704] NET: Registered protocol family 1
[ 0.172721] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.220272] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.220310] Unpacking initramfs...
[ 0.698268] Freeing initrd memory: 41072K
[ 0.698345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.698347] software IO TLB [mem 0xc64b2000-0xca4b2000] (64MB) mapped at [ffff8855c64b2000-ffff8855ca4b1fff]
[ 0.698518] Scanning for low memory corruption every 60 seconds
[ 0.698728] audit: initializing netlink subsys (disabled)
[ 0.698755] audit: type=2000 audit(1502230723.696:1): initialized
[ 0.699055] Initialise system trusted keyrings
[ 0.699107] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.700106] zbud: loaded
[ 0.700430] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.700556] fuse init (API version 7.26)
[ 0.701510] Key type asymmetric registered
[ 0.701511] Asymmetric key parser 'x509' registered
[ 0.701538] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.701558] io scheduler noop registered
[ 0.701559] io scheduler deadline registered
[ 0.701564] io scheduler cfq registered (default)
[ 0.701983] efifb: probing for efifb
[ 0.701991] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[ 0.701992] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.701992] efifb: scrolling: redraw
[ 0.701993] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.702054] Console: switching to colour frame buffer device 128x48
[ 0.702065] fb0: EFI VGA frame buffer device
[ 0.702070] intel_idle: MWAIT substates: 0x1120
[ 0.702071] intel_idle: v0.4.1 model 0x3A
[ 0.702176] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.702234] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.702236] ACPI: Power Button [PWRB]
[ 0.702261] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.702262] ACPI: Power Button [PWRF]
[ 0.702689] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.702786] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.702786] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.702944] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.702945] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.702976] GHES: HEST is not enabled!
[ 0.703023] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.723504] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.724622] Linux agpgart interface v0.103
[ 0.726159] loop: module loaded
[ 0.726270] libphy: Fixed MDIO Bus: probed
[ 0.726270] tun: Universal TUN/TAP device driver, 1.6
[ 0.726271] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.726292] PPP generic driver version 2.4.2
[ 0.726318] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.726320] ehci-pci: EHCI PCI platform driver
[ 0.726411] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.726415] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.726425] ehci-pci 0000:00:1a.0: debug port 2
[ 0.730330] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.730342] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7c18000
[ 0.744138] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.744195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.744196] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.744197] usb usb1: Product: EHCI Host Controller
[ 0.744197] usb usb1: Manufacturer: Linux 4.10.0-30-generic ehci_hcd
[ 0.744198] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.744331] hub 1-0:1.0: USB hub found
[ 0.744336] hub 1-0:1.0: 2 ports detected
[ 0.744486] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.744489] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.744498] ehci-pci 0000:00:1d.0: debug port 2
[ 0.748395] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.748398] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c17000
[ 0.764136] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.764193] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.764194] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.764195] usb usb2: Product: EHCI Host Controller
[ 0.764195] usb usb2: Manufacturer: Linux 4.10.0-30-generic ehci_hcd
[ 0.764196] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.764318] hub 2-0:1.0: USB hub found
[ 0.764321] hub 2-0:1.0: 2 ports detected
[ 0.764401] ehci-platform: EHCI generic platform driver
[ 0.764407] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.764409] ohci-pci: OHCI PCI platform driver
[ 0.764414] ohci-platform: OHCI generic platform driver
[ 0.764418] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.764497] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.764500] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.765570] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ 0.765574] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.765635] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.765636] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.765637] usb usb3: Product: xHCI Host Controller
[ 0.765637] usb usb3: Manufacturer: Linux 4.10.0-30-generic xhci-hcd
[ 0.765638] usb usb3: SerialNumber: 0000:00:14.0
[ 0.765759] hub 3-0:1.0: USB hub found
[ 0.765766] hub 3-0:1.0: 4 ports detected
[ 0.765998] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.766000] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.766020] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.766021] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.766021] usb usb4: Product: xHCI Host Controller
[ 0.766022] usb usb4: Manufacturer: Linux 4.10.0-30-generic xhci-hcd
[ 0.766023] usb usb4: SerialNumber: 0000:00:14.0
[ 0.766113] hub 4-0:1.0: USB hub found
[ 0.766119] hub 4-0:1.0: 4 ports detected
[ 0.766374] i8042: PNP: No PS/2 controller found.
[ 0.766467] mousedev: PS/2 mouse device common for all mice
[ 0.766621] rtc_cmos 00:02: RTC can wake from S4
[ 0.766754] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.766779] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.766783] i2c /dev entries driver
[ 0.766814] device-mapper: uevent: version 1.0.3
[ 0.766857] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 0.766861] intel_pstate: Intel P-state driver initializing
[ 0.767041] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.767042] EFI Variables Facility v0.08 2004-May-17
[ 0.771271] efivars: duplicate variable: SbAslBufferPtrVar-01f33c25-764d-43ea-aeea-6b5a41f3f3e8
[ 0.771641] NET: Registered protocol family 10
[ 0.774522] Segment Routing with IPv6
[ 0.774533] NET: Registered protocol family 17
[ 0.774539] Key type dns_resolver registered
[ 0.774788] microcode: sig=0x306a9, pf=0x2, revision=0x1c
[ 0.774882] microcode: Microcode Update Driver: v2.2.
[ 0.775009] registered taskstats version 1
[ 0.775016] Loading compiled-in X.509 certificates
[ 0.776696] Loaded X.509 cert 'Build time autogenerated kernel key: 620f588eea7f4d4895163d3415b9bd9e9d7a36b5'
[ 0.776706] zswap: loaded using pool lzo/zbud
[ 0.784809] Key type big_key registered
[ 0.784812] Key type trusted registered
[ 0.785959] Key type encrypted registered
[ 0.785960] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.785962] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.785975] evm: HMAC attrs: 0x1
[ 0.786155] Magic number: 13:219:350
[ 0.786247] rtc_cmos 00:02: setting system clock to 2017-08-08 22:18:44 UTC (1502230724)
[ 0.786274] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.786274] EDD information not available.
[ 0.786319] PM: Hibernation image not present or could not be loaded.
[ 0.787501] Freeing unused kernel memory: 2228K
[ 0.787502] Write protecting the kernel read-only data: 14336k
[ 0.787824] Freeing unused kernel memory: 1164K
[ 0.788243] Freeing unused kernel memory: 268K
[ 0.793524] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.801129] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.801183] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.801191] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.801535] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.801556] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.802475] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.802514] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.802547] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.802580] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.802614] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.818718] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.824433] wmi: Mapper loaded
[ 0.827457] [drm] Initialized
[ 0.827924] ahci 0000:00:1f.2: version 3.0
[ 0.828078] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2 impl SATA mode
[ 0.828079] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.828731] scsi host0: ahci
[ 0.828958] scsi host1: ahci
[ 0.829074] scsi host2: ahci
[ 0.832135] scsi host3: ahci
[ 0.832203] scsi host4: ahci
[ 0.832256] scsi host5: ahci
[ 0.832284] ata1: DUMMY
[ 0.832286] ata2: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16180 irq 28
[ 0.832286] ata3: DUMMY
[ 0.832286] ata4: DUMMY
[ 0.832287] ata5: DUMMY
[ 0.832287] ata6: DUMMY
[ 0.845030] [drm] Memory usable by graphics device = 2048M
[ 0.845031] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 0.845032] fb: switching to inteldrmfb from EFI VGA
[ 0.845050] Console: switching to colour dummy device 80x25
[ 0.845118] [drm] Replacing VGA console driver
[ 0.851194] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.851195] [drm] Driver supports precise vblank timestamp query.
[ 0.854695] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.037074] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.037248] acpi device:49: registered as cooling_device9
[ 1.037295] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 1.037335] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
[ 1.072125] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.092126] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[ 1.092145] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.095916] random: fast init done
[ 1.146493] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.147542] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
[ 1.147547] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff8857174d9320), AE_NOT_FOUND (20160930/psparse-543)
[ 1.150440] ata2.00: ATA-9: SanDisk SDSSDA120G, Z33130RL, max UDMA/133
[ 1.150441] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.155402] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
[ 1.155405] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff8857174d9320), AE_NOT_FOUND (20160930/psparse-543)
[ 1.160062] ata2.00: configured for UDMA/133
[ 1.160192] scsi 1:0:0:0: Direct-Access ATA SanDisk SDSSDA12 30RL PQ: 0 ANSI: 5
[ 1.200187] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.200219] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.200232] sd 1:0:0:0: [sda] Write Protect is off
[ 1.200233] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.200250] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.201260] sda: sda1 sda2 sda3
[ 1.201474] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.205574] fbcon: inteldrmfb (fb0) is primary device
[ 1.205622] Console: switching to colour frame buffer device 240x67
[ 1.205643] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.224468] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.224469] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.224612] hub 1-1:1.0: USB hub found
[ 1.224713] hub 1-1:1.0: 6 ports detected
[ 1.233024] usb 3-3: New USB device found, idVendor=10eb, idProduct=0001
[ 1.233026] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.233028] usb 3-3: Product: FreeBox 4
[ 1.233030] usb 3-3: Manufacturer: FreeBox SA
[ 1.233031] usb 3-3: SerialNumber: 1.00
[ 1.244492] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.244495] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.244761] hub 2-1:1.0: USB hub found
[ 1.244856] hub 2-1:1.0: 8 ports detected
[ 1.352091] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[ 1.494820] usb 3-4: New USB device found, idVendor=046d, idProduct=c52b
[ 1.494822] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.494824] usb 3-4: Product: USB Receiver
[ 1.494825] usb 3-4: Manufacturer: Logitech
[ 1.497847] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.502234] usbcore: registered new interface driver usbhid
[ 1.502234] usbhid: USB HID core driver
[ 1.504199] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[ 1.634181] input: Logitech K400 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:400E.0004/input/input3
[ 1.634406] logitech-hidpp-device 0003:046D:400E.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:14.0-4:1
[ 1.728073] tsc: Refined TSC clocksource calibration: 3090.564 MHz
[ 1.728080] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c8c75b1d2d, max_idle_ns: 440795233360 ns
[ 2.752161] clocksource: Switched to clocksource tsc
[ 6.506856] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.609464] efivars: duplicate variable: SbAslBufferPtrVar-01f33c25-764d-43ea-aeea-6b5a41f3f3e8
[ 6.617733] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 6.617821] systemd[1]: Detected architecture x86-64.
[ 6.617976] systemd[1]: Set hostname to <Tig>.
[ 6.682456] systemd[1]: Reached target User and Group Name Lookups.
[ 6.682550] systemd[1]: Created slice System Slice.
[ 6.682634] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.682657] systemd[1]: Listening on udev Kernel Socket.
[ 6.682709] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.682738] systemd[1]: Listening on Journal Socket.
[ 6.682977] systemd[1]: Started Read required files in advance.
[ 6.712234] lp: driver loaded but no devices found
[ 6.715625] ppdev: user-space parallel port driver
[ 6.787497] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 6.793126] systemd-journald[331]: Received request to flush runtime journal from PID 1
[ 6.849175] EDAC MC: Ver: 3.0.0
[ 6.855995] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160930/utaddress-247)
[ 6.856000] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.856002] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[ 6.856003] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.856004] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[ 6.856005] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.856006] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[ 6.856007] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.856007] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.862296] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.884590] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 6.884591] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 6.884592] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 6.884592] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 6.927475] AVX version of gcm_enc/dec engaged.
[ 6.927476] AES CTR mode by8 optimization enabled
[ 6.932036] cdc_ether 3-3:1.0 eth0: register 'cdc_ether' at usb-0000:00:14.0-3, CDC Ethernet Device, 00:07:cb:00:00:ff
[ 6.932051] usbcore: registered new interface driver cdc_ether
[ 6.964824] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 6.989717] kvm: disabled by bios
[ 6.990674] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 6.990675] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.990676] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.990677] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.990677] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 6.990678] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.990679] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 6.990680] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 6.990681] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 7.027366] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 7.033519] cdc_ether 3-3:1.0 enx0007cb0000ff: renamed from eth0
[ 7.040909] asus_wmi: ASUS WMI generic driver loaded
[ 7.041998] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 7.042033] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 7.042064] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.042095] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.042125] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.042156] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.042739] asus_wmi: Initialization: 0x0
[ 7.042756] asus_wmi: BIOS WMI version: 0.9
[ 7.042779] asus_wmi: SFUN value: 0x0
[ 7.042995] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
[ 7.043074] asus_wmi: Number of fans: 1
[ 7.044297] intel_rapl: Found RAPL domain package
[ 7.044298] intel_rapl: Found RAPL domain core
[ 7.044299] intel_rapl: Found RAPL domain uncore
[ 7.044302] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 7.297975] audit: type=1400 audit(1502230731.006:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=756 comm="apparmor_parser"
[ 7.297977] audit: type=1400 audit(1502230731.006:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=756 comm="apparmor_parser"
[ 7.299030] audit: type=1400 audit(1502230731.006:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=761 comm="apparmor_parser"
[ 7.299031] audit: type=1400 audit(1502230731.006:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=761 comm="apparmor_parser"
[ 7.299517] audit: type=1400 audit(1502230731.006:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=757 comm="apparmor_parser"
[ 7.299518] audit: type=1400 audit(1502230731.006:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=757 comm="apparmor_parser"
[ 7.299518] audit: type=1400 audit(1502230731.006:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=757 comm="apparmor_parser"
[ 7.299519] audit: type=1400 audit(1502230731.006:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=757 comm="apparmor_parser"
[ 7.300524] audit: type=1400 audit(1502230731.010:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=762 comm="apparmor_parser"
[ 7.302549] audit: type=1400 audit(1502230731.010:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=763 comm="apparmor_parser"
[ 7.410696] Adding 8069628k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:8069628k SSFS
[ 7.731768] IPv6: ADDRCONF(NETDEV_UP): enx0007cb0000ff: link is not ready
[ 7.731828] cdc_ether 3-3:1.0 enx0007cb0000ff: kevent 12 may have been dropped
[ 23.906237] random: crng init done
[ 4757.900580] usb 3-3: USB disconnect, device number 2
[ 4757.900695] cdc_ether 3-3:1.0 enx0007cb0000ff: unregister 'cdc_ether' usb-0000:00:14.0-3, CDC Ethernet DeviceMerci :)
Dernière modification par Petit-Prince75 (Le 09/08/2017, à 01:48)
Hors ligne
#4 Le 10/08/2017, à 10:59
- inbox
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Il semble que ton système doive être mis à jour pour que l'ethernet fonctionne.
Comme tu as une connexion wifi, fait ce qui suit :
sudo apt-get updatesudo apt-get install r8168-dkmsPour mettre tout ton système à jour :
sudo apt-get dist-upgradeUn problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#5 Le 11/08/2017, à 00:31
- Petit-Prince75
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Bonsoir,
Je viens d'essayer les commandes et cela me met un message d'erreur :
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
linux-headers-4.10.0-28 linux-headers-4.10.0-28-generic
linux-image-4.10.0-28-generic linux-image-extra-4.10.0-28-generic
linux-signed-image-4.10.0-28-generic
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
The following additional packages will be installed:
dkms
Les NOUVEAUX paquets suivants seront installés :
dkms r8168-dkms
0 mis à jour, 2 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 151 ko dans les archives.
Après cette opération, 1 374 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de:1 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 dkms all 2.2.0.3-2ubuntu11.3 [66,1 kB]
Réception de:2 http://fr.archive.ubuntu.com/ubuntu xenial/universe amd64 r8168-dkms all 8.041.00-1 [85,0 kB]
151 ko réceptionnés en 0s (494 ko/s)
Sélection du paquet dkms précédemment désélectionné.
(Lecture de la base de données... 254097 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../dkms_2.2.0.3-2ubuntu11.3_all.deb ...
Dépaquetage de dkms (2.2.0.3-2ubuntu11.3) ...
Sélection du paquet r8168-dkms précédemment désélectionné.
Préparation du dépaquetage de .../r8168-dkms_8.041.00-1_all.deb ...
Dépaquetage de r8168-dkms (8.041.00-1) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.5-1) ...
Paramétrage de dkms (2.2.0.3-2ubuntu11.3) ...
Paramétrage de r8168-dkms (8.041.00-1) ...
Loading new r8168-8.041.00 DKMS files...
First Installation: checking all kernels...
Building for 4.10.0-30-generic and 4.10.0-32-generic
Building initial module for 4.10.0-30-generic
Error! Bad return status for module build on kernel: 4.10.0-30-generic (x86_64)
Consult /var/lib/dkms/r8168/8.041.00/build/make.log for more information.Puis une fenêtre s'ouvre m'indique erreur programme. J'envoie le message et ça me renvoie sur cette page que je ne comprends pas 
https://bugs.launchpad.net/ubuntu/+sour … ug/1635824
Vu l'erreur je n'ai pas essayé la mise à jour de tout le système. Est ce que je peux le faire maintenant ou y a t-il autre chose à faire avant ?
Merci encore !
Hors ligne
#6 Le 11/08/2017, à 11:49
- inbox
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Tu vas supprimer le paquet qui ne passe pas :
sudo apt-get remove r8168-dkmsEnsuite mets à jour ton système :
sudo apt-get dist-upgradeUn problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#7 Le 14/08/2017, à 12:33
- Petit-Prince75
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
J'ai fait ça et la connexion ne marche toujours pas avec un câble éthernet...
Hors ligne
#8 Le 14/08/2017, à 13:39
- inbox
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
J'ai parcouru le lien de bug sur le launchpad ainsi que le forum à propos de "RTL8111/8168/8411".
Les noyaux après la version 4.4 ne sont pas compatibles avec l'ajout du module r8168-dkms.
Il te faut donc installer la version 16.04.1 LTS. La même version en Torrent, si tu préfère.
Teste la version en live, sur ton PC, avant d'installer.
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#9 Le 15/08/2017, à 17:40
- Petit-Prince75
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
J'avais aussi déjà vu d'autres messages sur le sujet mais rien ne m'avait fait avancer, et un certain nombre semblaient incompréhensibles...
Du coup, ça veut dire que c'est un problème lié à la carte réseau dont les pilotes sont incompatibles avec les dernières versions d'Ubuntu pour une connexion filaire ?
Si j'installe la version 16.04.1LTS et que ça fonctionne, est ce que ça voudra dire que je ne pourrai plus faire de mises à jour sur les prochaines versions car ça ne marchera probablement pas ?
J'essaye vite !
Hors ligne
#10 Le 15/08/2017, à 19:35
- inbox
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Si tu installes cette version, le système restera avec la version de noyau 4.4.xxxxx. Le système ne te proposera que ces versions la jusqu'en avril 2021.
Passé cette date, il faudra voir quoi faire. Mais les choses auront bien évolué entre temps...
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#11 Le 17/08/2017, à 00:46
- Petit-Prince75
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Un truc étrange : un ami m'a donné un câble pour connecter ma box à mon ordinateur en USB et... ça fonctionne. Bien moins vite qu'en WiFi ou Ethernet mais bizarrement ça marche. J'avais testé un autre câble Ethernet au cas où mais ça ne marchait pas non plus. Du coup, plutôt que modifier ma version d'Ubuntu (j'ai un peu peur de tout perdre et de passer trois heures à tout refaire), je vais peut-être rester sur celle-ci.
Mais comment ça se fait qu'un câble USB puisse fonctionner et pas un câble éthernet ?
Hors ligne
#12 Le 17/08/2017, à 12:17
- inbox
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Le système reconnaît lorsque le câble USB est utilisé comme câble réseau. Un pilote spécifique est chargé. Il m'est arrivé de l'utiliser lorsqu'il n'y a pas de pilote pour les composants wifi et ethernet.
Avec le câble USB tu ne passe pas par ta carte ethernet.
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#13 Le 18/08/2017, à 03:01
- Petit-Prince75
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Je comprends mieux. Au pire, peut-être que d'ici quelques temps, j'essaierai de changer de carte réseau et d'en prendre une avec des pilotes libres, ça m'ennuie d'être limité à des versions antérieures d'Ubuntu. Pour le moment je me contenterai du WiFi et USB.
Merci encore pour tout 
Hors ligne
#14 Le 18/08/2017, à 07:15
- xubu1957
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Bonjour,
Vu le noyau :
4.10.0-30-genericTon noyau est celui de la version 17.04 , regarde aussi cette solution :
Le 27/04/2017, Olivier33300 a écrit :
Bonjour,
Here is how to fix this problem.
Edit file /usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf and change it's content from :
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:wwan
To :[keyfile]
unmanaged-devices=*,except:type:ethernet,except:type:wifi,except:type:wwan
And then run :sudo service network-manager restartThat's all.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#15 Le 19/08/2017, à 03:08
- Petit-Prince75
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Bonsoir,
Merci pour la réponse !
J'ai juste deux petites questions et un... problème.
Les questions :
- Vu que, si j'ai bien compris ce que j'ai fait auparavant, j'ai supprimé le module 8168-dkms, faut-il que je le réinstalle ?
- Ce n'est pas problématique que j'ai le noyau de la version 17.04 sans avoir la version 17.04 installée ?
Le problème c'est que je n'ai pas ce fichier dans mon système. Je peux donc le créer mais pas l'éditer. Du coup, ça commence plutôt mal, surtout si je suis supposé l'avoir...
Hors ligne
#16 Le 19/08/2017, à 06:45
- xubu1957
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Bonjour,
- Ce n'est pas problématique que j'ai le noyau de la version 17.04 sans avoir la version 17.04 installée ?
C'est la nouvelle politique de Canonical > ubuntu.com/Kernel/RollingLTSEnablementStack#ga-16.04
traduction a écrit :
Proposition
À partir de la version Ubuntu 16.04 LTS, Xenial Xerus, l'équipe Kernel et Foundations a proposé de passer à un modèle légèrement différent pour le maintien des noyaux HWE. Au lieu de soutenir différentes piles HWE en parallèle jusqu'à ce que nous atteignions la version finale du 5e point d'un LTS, nous souhaitons que les utilisateurs avancent progressivement au fur et à mesure que les nouvelles Piles HWE sont introduites, c'est-à-dire. Instancier une pile HWE roulante. Ceci est mieux décrit avec le schéma suivant:
et schéma > 16.04.x_Ubuntu_Kernel_Support
J'approuve la proposition d' inbox :
inbox a écrit :
Les noyaux après la version 4.4 ne sont pas compatibles avec l'ajout du module r8168-dkms.
Il te faut donc installer la version 16.04.1 LTS. La même version en Torrent, si tu préfère.
Ou une autre possibilité > howtoinstall.co/en/ubuntu/xenial/r8168-dkms mais je ne suis pas expert pour apprécier la valeur de cette solution.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#17 Le 19/08/2017, à 20:10
- Petit-Prince75
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Pour le howtoinstall, de manière assez logique, j'ai toujours la même erreur de noyau dont avait parlé Inbox :
Error! Bad return status for module build on kernel: 4.10.0-30-generic (x86_64)Je pense me passer d'Ethernet pour pouvoir rester sur les versions plus récentes d'Ubuntu.
Et, si c'est lié à la carte réseau et qu'un jour j'ai besoin d'une connexion plus rapide, je changerai de carte pour en prendre une avec des pilotes libres. Je dois pouvoir trouver ça pour un prix très abordable et c'est simple à changer.
Merci encore
Hors ligne
#18 Le 20/08/2017, à 03:22
- Petit-Prince75
Re : [Résolu] Impossible de se connecter à Internet (Ubuntu 16.04 LTS).
Bon, je vais peut-être passer pour un idiot mais finalement ça marche. J'ai juste désactivé le mode routeur dans les paramètres de la freebox et depuis ça fonctionne avec un câble Ethernet...
Quand j'aurai le temps, j'essaierai de me mettre à tout ça parce que je ne comprends pas !
Hors ligne