Contenu | Rechercher | Menus

Annonce

Ubuntu-fr vend de superbes t-shirts et de belles clés USB 32Go
Rendez-vous sur la boutique En Vente Libre

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#901 Le 23/08/2018, à 22:00

ares

Re : fil pour elleji

Bonjour,

elleji a écrit :

(...)
j'espere etre clair !

Ben non !
* Quelle version Ubuntu ?
* Si une seule version Ubuntu sur plusieurs partitions donc sur tout le DD = une unique partition de démarrage dans Grub pour ce « nouvel ubuntu »
Regarde la doc partition(s)
Regarde la doc Grub
Solution 1 : ICI
Solution 2 : ICI

Et ce qui fonctionne toujours et n'a jamais changé depuis le début de ce forum d'entraide :
            LIRE LA DOCUMENTATION AVANT TOUTE UTILISATION !
Principe valable aussi pour : frigo, four, TV, phone,  tante camping, lave-linge, PC, sèche cheveux, grille pain, etc

@+

Dernière modification par ares (Le 23/08/2018, à 22:02)

Hors ligne

#902 Le 24/08/2018, à 06:04

elleji

Re : fil pour elleji

signalement  : j'ai un ubuntu 18.04.1 dfférent sur plusieur partitions , avant je pouvais redémarrer et changer de partition en gardant internet , maintenant je suis obliger d'arreter l'ordi. !
j'espere etre clair cette fois !


celui qui ne cherche qu'à s'occuper et c'est tout ce qu'il a trouvé ...

Hors ligne

#903 Le 24/08/2018, à 06:15

ares

Re : fil pour elleji

elleji a écrit :

j'espere etre clair cette fois !

Ben non !

* tu as installé plusieurs fois Ubuntu sur plusieurs partitions ?
* tu as installé Ubuntu répartie sur plusieurs partitions ?

Autres question :
* TU AS LU LES DOCUMENTATIONS DES LIENS ?

@+

Hors ligne

#904 Le 24/08/2018, à 07:05

alex2423

Re : fil pour elleji

elleji a écrit :

signalement  : j'ai un ubuntu 18.04.1 dfférent sur plusieur partitions

Okay, tu as plusieurs Ubuntu 18.04 installé sur ton PC.
Est ce que tu peux nous donner tes partitions ?

Pour lister tes partitions,peux tu executer la commande :

lsblk

Hors ligne

#905 Le 24/08/2018, à 07:06

elleji

Re : fil pour elleji

* tu as installé plusieurs fois Ubuntu sur plusieurs partitions ?
oui ! mais je n'arrive à avoir internet que si j'éteint si je veux changer de partition


celui qui ne cherche qu'à s'occuper et c'est tout ce qu'il a trouvé ...

Hors ligne

#906 Le 24/08/2018, à 07:20

elleji

Re : fil pour elleji

alex2423 a écrit :

Est ce que tu peux nous donner tes partitions ?

sda4 et sda7


celui qui ne cherche qu'à s'occuper et c'est tout ce qu'il a trouvé ...

Hors ligne

#907 Le 24/08/2018, à 07:22

alex2423

Re : fil pour elleji

elleji a écrit :

oui ! mais je n'arrive à avoir internet que si j'éteint si je veux changer de partition

On va pas parler de choses concrètes chaque chose en son temps.
Tu vas donner tes partitions en executant la commande :

lsblk

Il faut que l'on y aille étape par étape pour que l'on comprenne au mieux ton problème. S'il te plait, est ce que tu peux executer cette commande sur un Ubuntu ou tu as accès Internet.

Hors ligne

#908 Le 24/08/2018, à 07:42

elleji

Re : fil pour elleji

~ > lsblk
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
loop0    7:0    0  86,9M  1 loop /snap/core/4917
loop1    7:1    0    13M  1 loop /snap/gnome-characters/103
loop2    7:2    0   2,3M  1 loop /snap/gnome-calculator/180
loop3    7:3    0   3,2M  1 loop /snap/gnome-sudoku/34
loop4    7:4    0  14,5M  1 loop /snap/gnome-logs/37
loop5    7:5    0  34,7M  1 loop /snap/gtk-common-themes/319
loop6    7:6    0   3,7M  1 loop /snap/gnome-system-monitor/51
loop7    7:7    0    87M  1 loop /snap/core/5145
loop8    7:8    0 140,9M  1 loop /snap/gnome-3-26-1604/70
loop9    7:9    0   3,7M  1 loop /snap/gnome-system-monitor/54
loop10   7:10   0    13M  1 loop /snap/gnome-characters/117
loop11   7:11   0   2,3M  1 loop /snap/gnome-calculator/199
loop12   7:12   0  14,5M  1 loop /snap/gnome-logs/40
sda      8:0    0 111,8G  0 disk
├─sda1   8:1    0   512M  0 part /boot/efi
├─sda2   8:2    0    15M  0 part
├─sda3   8:3    0    15M  0 part
├─sda4   8:4    0   7,4G  0 part /
├─sda5   8:5    0     2G  0 part
└─sda7   8:7    0  21,6G  0 part
sr0     11:0    1  1024M  0 rom 
~ >


celui qui ne cherche qu'à s'occuper et c'est tout ce qu'il a trouvé ...

Hors ligne

#909 Le 24/08/2018, à 10:36

alex2423

Re : fil pour elleji

Okay, la prochaine fois essaie d'utiliser le bouton les "<>" en bleue pour mettre entre balise.

 lsblk
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
loop0    7:0    0  86,9M  1 loop /snap/core/4917
loop1    7:1    0    13M  1 loop /snap/gnome-characters/103
loop2    7:2    0   2,3M  1 loop /snap/gnome-calculator/180
loop3    7:3    0   3,2M  1 loop /snap/gnome-sudoku/34
loop4    7:4    0  14,5M  1 loop /snap/gnome-logs/37
loop5    7:5    0  34,7M  1 loop /snap/gtk-common-themes/319
loop6    7:6    0   3,7M  1 loop /snap/gnome-system-monitor/51
loop7    7:7    0    87M  1 loop /snap/core/5145
loop8    7:8    0 140,9M  1 loop /snap/gnome-3-26-1604/70
loop9    7:9    0   3,7M  1 loop /snap/gnome-system-monitor/54
loop10   7:10   0    13M  1 loop /snap/gnome-characters/117
loop11   7:11   0   2,3M  1 loop /snap/gnome-calculator/199
loop12   7:12   0  14,5M  1 loop /snap/gnome-logs/40
sda      8:0    0 111,8G  0 disk 
├─sda1   8:1    0   512M  0 part /boot/efi
├─sda2   8:2    0    15M  0 part 
├─sda3   8:3    0    15M  0 part 
├─sda4   8:4    0   7,4G  0 part /
├─sda5   8:5    0     2G  0 part 
└─sda7   8:7    0  21,6G  0 part 
sr0     11:0    1  1024M  0 rom  

Peux tu me confirmer que tu as 2 Ubuntu 18.44 ?

Est ce que tes 2 Ubuntu 18.4 sont installées chacune sur /dev/sda4 et sur /dev/sda7 ?

Hors ligne

#910 Le 24/08/2018, à 11:09

elleji

Re : fil pour elleji

oui


celui qui ne cherche qu'à s'occuper et c'est tout ce qu'il a trouvé ...

Hors ligne

#911 Le 25/08/2018, à 07:00

alex2423

Re : fil pour elleji

J'ai un peu de mal à comprendre ton problème, on va essayer de l'éclaircir

Rapide rappel :
Grub est un bootloader, il te permet de charger un OS (un Ubuntu, ou tout autre OS, distribution  linux). Il est utilisé au démarrage du PC.

Maintenant reprenons ce que tu avais dit :

elleji a écrit :

j'ai un nouvel ubuntu sur plusieurs partitions , avant je pouvais redémarrer et passer par grub changer de partition en gardant internet , maintenant je suis obliger d'arreter l'ordi. !
j'espere etre clair !

Au moment où Grub est utilisé pour charger un OS, aucun OS est utilisé, donc ton PC n'utilise pas internet.

Pour passer dans ton cas de Ubuntu sur sda5 à Ubuntu sur sda7, tu es obligé de redémarrer ton poste.


A mon tour, j'espère avoir été clair dans mon explications. Peut être que mon scénario va te permettre d'y voir plus clair.


Exemple de scénario  :
Tu es sur Ubuntu installé sur sda5. A un moment, tu veux passer au Ubuntu de sda7. Tu vas donc devoir redémarrer ton PC . Tu tombera de nouveau sur Grub. Au lieu de sélectionner Ubuntu sur sda5,  tu sélectionneras  cette fois-ci Ubuntu sur sda7. Pendant tout cette période de redémarrage pour basculer sur un autre OS, ton ordinateur n'est pas connecté à Internet. Lorsque Ubuntu sur sda7 sera redémarré, tu pourras établir une connexion Internet. Ce n'est qu'à ce moment là!..

Hors ligne

#912 Le 25/08/2018, à 07:14

elleji

Re : fil pour elleji

voila je suis sda7 avec internet pour aller sur sda5 et avoir internet je dois pas redemarer simplement et choisir sda5 mais éteindre et démarrer puis choisir sda5
j'espere plus clair ;-)
ps : sda2 sda3 sda5 sont des données que je garde sous la main !
aussi j'ai retrecie sda7

Dernière modification par elleji (Le 25/08/2018, à 07:40)


celui qui ne cherche qu'à s'occuper et c'est tout ce qu'il a trouvé ...

Hors ligne

#913 Le 25/08/2018, à 08:57

alex2423

Re : fil pour elleji

J'y vois plus clair en effet ! Ton problème n'est pas la connexion internet mais la fonction redémarrage de ton PC. Il  t'ai possible d'éteindre ton PC mais il ne t'est pas possible de redémarrer ton PC. A chaque fois tu es obligé d'éteindre logiciellement avec Ubuntu puis tu es obligé d'appuyer sur le bouton power de ton PC pour le rallumer.

Dans ce cas, est ce que tu pourrais essayer la commande suivante pour redémarrer en ligne de commande ?

reboot

Tu as aura certainement un problème de droit. Tu ne sera pas autorisé. Dans ce cas, tapes cette commande :

sudo reboot

Dernière modification par alex2423 (Le 25/08/2018, à 09:01)

Hors ligne

#914 Le 25/08/2018, à 09:17

elleji

Re : fil pour elleji

j'ai fait et marche pas  , a tous hasard un dmesg :

[    0.000000] Linux version 4.15.0-32-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #35-Ubuntu SMP Fri Aug 10 17:58:07 UTC 2018 (Ubuntu 4.15.0-32.35-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-32-generic root=UUID=557cbc05-f621-4c8a-9719-3f1ec55b9605 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000076914fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000076915000-0x0000000079a76fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079a77000-0x0000000079a97fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079a98000-0x0000000079ae6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000079ae7000-0x0000000079e11fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079e12000-0x0000000079e67fff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000079e68000-0x000000007a1d3fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a1d4000-0x000000007a1d4fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007a1d5000-0x000000007a1fefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a1ff000-0x000000007a766fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a767000-0x000000007a768fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a769000-0x000000007affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by American Megatrends
[    0.000000] efi:  ACPI=0x79a98000  ACPI 2.0=0x79a98000  SMBIOS=0x79cdd000  SMBIOS 3.0=0x79cdc000  ESRT=0x7597f298 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Notebook                         W94_95_97PU/W94_95_97PU, BIOS 1.05.04 04/14/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-6FFFF write-back
[    0.000000]   70000-7FFFF uncachable
[    0.000000]   80000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007B000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 0100000000 mask 7F80000000 write-back
[    0.000000]   4 base 00FF800000 mask 7FFF800000 write-combining
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x000000007597f298 to 0x000000007597f2d0.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x15f73f000, 0x15f73ffff] PGTABLE
[    0.000000] BRK [0x15f740000, 0x15f740fff] PGTABLE
[    0.000000] BRK [0x15f741000, 0x15f741fff] PGTABLE
[    0.000000] BRK [0x15f742000, 0x15f742fff] PGTABLE
[    0.000000] BRK [0x15f743000, 0x15f743fff] PGTABLE
[    0.000000] BRK [0x15f744000, 0x15f744fff] PGTABLE
[    0.000000] BRK [0x15f745000, 0x15f745fff] PGTABLE
[    0.000000] BRK [0x15f746000, 0x15f746fff] PGTABLE
[    0.000000] BRK [0x15f747000, 0x15f747fff] PGTABLE
[    0.000000] BRK [0x15f748000, 0x15f748fff] PGTABLE
[    0.000000] BRK [0x15f749000, 0x15f749fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3163b000-0x34b14fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x0000000079A98000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x0000000079A980B0 0000CC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x0000000079AA2330 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x0000000079A98220 00A105 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x0000000079AB6080 000040
[    0.000000] ACPI: FPDT 0x0000000079AA2450 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x0000000079AA24A0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x0000000079AA2540 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x0000000079AA2580 000038 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: LPIT 0x0000000079AA25C0 00005C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: APIC 0x0000000079AA2620 000084 (v03 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: PRAM 0x0000000079AA26B0 000030 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: WSMT 0x0000000079AA26E0 000028 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: SSDT 0x0000000079AA2710 0010FB (v02 INTEL  DptfTab  00000003 BRXT 0100000D)
[    0.000000] ACPI: SSDT 0x0000000079AA3810 00002C (v01 Intel_ Platform 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x0000000079AA3840 000400 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x0000000079AA3C40 00072B (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x0000000079AA4370 000228 (v02 PmRef  Cpu0Tst  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x0000000079AA45A0 00017C (v02 PmRef  ApTst    00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x0000000079AA4720 002652 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x0000000079AA6D80 000042 (v01 ALASKA A M I    00000000      00000000)
[    0.000000] ACPI: BGRT 0x0000000079AA6DD0 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: TPM2 0x0000000079AA6E10 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.000000] ACPI: DMAR 0x0000000079AA6E50 0000A8 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: WDAT 0x0000000079AA6F00 000104 (v01                 00000000      00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x17ffd5000-0x17fffffff]
[    0.000000] tsc: Using PIT calibration value
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000003efff]
[    0.000000]   node   0: [mem 0x0000000000040000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000012151000-0x0000000076914fff]
[    0.000000]   node   0: [mem 0x0000000079a77000-0x0000000079a97fff]
[    0.000000]   node   0: [mem 0x0000000079e68000-0x000000007a1d3fff]
[    0.000000]   node   0: [mem 0x000000007a1ff000-0x000000007a766fff]
[    0.000000]   node   0: [mem 0x000000007a769000-0x000000007affffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.000000] On node 0 totalpages: 1005804
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 23 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7462 pages used for memmap
[    0.000000]   DMA32 zone: 477520 pages, LIFO batch:31
[    0.000000]   Normal zone: 8192 pages used for memmap
[    0.000000]   Normal zone: 524288 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[    0.000000] PM: Registered nosave memory: [mem 0x76915000-0x79a76fff]
[    0.000000] PM: Registered nosave memory: [mem 0x79a98000-0x79ae6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x79ae7000-0x79e11fff]
[    0.000000] PM: Registered nosave memory: [mem 0x79e12000-0x79e67fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a1d4000-0x7a1d4fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a1d5000-0x7a1fefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a767000-0x7a768fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd1000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe041fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xcfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 990063
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-32-generic root=UUID=557cbc05-f621-4c8a-9719-3f1ec55b9605 ro quiet splash
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3730340K/4023216K available (12300K kernel code, 2470K rwdata, 4244K rodata, 2408K init, 2416K bss, 292876K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39116 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[    0.000000] hpet clockevent registered
[    0.004000] APIC: Switch to symmetric I/O mode setup
[    0.004000] DMAR: Host address width 39
[    0.004000] DMAR: DRHD base: 0x000000fed64000 flags: 0x0
[    0.004000] DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.004000] DMAR: DRHD base: 0x000000fed65000 flags: 0x1
[    0.004000] DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.004000] DMAR: RMRR base: 0x00000079a12000 end: 0x00000079a31fff
[    0.004000] DMAR: RMRR base: 0x0000007be00000 end: 0x0000007fffffff
[    0.004000] DMAR-IR: IOAPIC id 1 under DRHD base  0xfed65000 IOMMU 1
[    0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed65000
[    0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.004000] x2apic enabled
[    0.004000] Switched APIC routing to cluster x2apic.
[    0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.032000] tsc: PIT calibration matches HPET. 1 loops
[    0.032000] tsc: Detected 1094.433 MHz processor
[    0.032000] tsc: Detected 1094.400 MHz TSC
[    0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=4377600)
[    0.032000] pid_max: default: 32768 minimum: 301
[    0.036120] Security Framework initialized
[    0.036124] Yama: becoming mindful.
[    0.036193] AppArmor: AppArmor initialized
[    0.037937] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.038807] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.038875] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.038906] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.039508] mce: CPU supports 7 MCE banks
[    0.039568] CPU0: Thermal monitoring enabled (TM1)
[    0.039650] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.039653] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.039657] Spectre V2 : Mitigation: Full generic retpoline
[    0.039659] Speculative Store Bypass: Vulnerable
[    0.059472] Freeing SMP alternatives memory: 36K
[    0.068231] TSC deadline timer enabled
[    0.068242] smpboot: CPU0: Intel(R) Pentium(R) CPU N4200 @ 1.10GHz (family: 0x6, model: 0x5c, stepping: 0x9)
[    0.068409] mce: [Hardware Error]: Machine check events logged
[    0.068415] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 4: a600000000020408
[    0.068427] mce: [Hardware Error]: TSC 0 ADDR fef13580 
[    0.068438] mce: [Hardware Error]: PROCESSOR 0:506c9 TIME 1535184121 SOCKET 0 APIC 0 microcode 2c
[    0.068576] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.068617] ... version:                4
[    0.068618] ... bit width:              48
[    0.068620] ... generic registers:      4
[    0.068621] ... value mask:             0000ffffffffffff
[    0.068623] ... max period:             00007fffffffffff
[    0.068625] ... fixed-purpose events:   3
[    0.068626] ... event mask:             000000070000000f
[    0.068730] Hierarchical SRCU implementation.
[    0.070968] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.071015] smp: Bringing up secondary CPUs ...
[    0.071330] x86: Booting SMP configuration:
[    0.071334] .... node  #0, CPUs:      #1 #2 #3
[    0.076793] smp: Brought up 1 node, 4 CPUs
[    0.076793] smpboot: Max logical packages: 1
[    0.076793] smpboot: Total of 4 processors activated (8755.20 BogoMIPS)
[    0.080504] devtmpfs: initialized
[    0.080504] x86/mm: Memory block size: 128MB
[    0.081327] evm: security.selinux
[    0.081329] evm: security.SMACK64
[    0.081331] evm: security.SMACK64EXEC
[    0.081332] evm: security.SMACK64TRANSMUTE
[    0.081333] evm: security.SMACK64MMAP
[    0.081335] evm: security.apparmor
[    0.081336] evm: security.ima
[    0.081338] evm: security.capability
[    0.081388] PM: Registering ACPI NVS region [mem 0x79a98000-0x79ae6fff] (323584 bytes)
[    0.081388] PM: Registering ACPI NVS region [mem 0x7a1d4000-0x7a1d4fff] (4096 bytes)
[    0.081388] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.081388] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.081388] pinctrl core: initialized pinctrl subsystem
[    0.081388] RTC time:  8:02:01, date: 08/25/18
[    0.085640] NET: Registered protocol family 16
[    0.085896] audit: initializing netlink subsys (disabled)
[    0.085914] audit: type=2000 audit(1535184121.084:1): state=initialized audit_enabled=0 res=1
[    0.085914] cpuidle: using governor ladder
[    0.085914] cpuidle: using governor menu
[    0.085914] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.085914] ACPI: bus type PCI registered
[    0.085914] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.085914] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.085914] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.085914] PCI: Using configuration type 1 for base access
[    0.090281] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.090281] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.090281] ACPI: Added _OSI(Module Device)
[    0.090281] ACPI: Added _OSI(Processor Device)
[    0.090281] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.090281] ACPI: Added _OSI(Processor Aggregator Device)
[    0.090281] ACPI: Added _OSI(Linux-Dell-Video)
[    0.092038] ACPI: Executed 2 blocks of module-level executable AML code
[    0.107923] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.110968] ACPI: Dynamic OEM Table Load:
[    0.110985] ACPI: SSDT 0xFFFF8FFF7A21C000 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.112567] ACPI: Dynamic OEM Table Load:
[    0.112581] ACPI: SSDT 0xFFFF8FFF7A21CA00 00015F (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.113405] ACPI: Dynamic OEM Table Load:
[    0.113418] ACPI: SSDT 0xFFFF8FFF7A1ED300 00008D (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.116922] ACPI: EC: EC started
[    0.116925] ACPI: EC: interrupt blocked
[    0.224164] ACPI: \_SB_.PCI0.SBRG.EC__: Used as first EC
[    0.224170] ACPI: \_SB_.PCI0.SBRG.EC__: GPE=0x2c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.224174] ACPI: \_SB_.PCI0.SBRG.EC__: Used as boot DSDT EC to handle transactions
[    0.224175] ACPI: Interpreter enabled
[    0.224253] ACPI: (supports S0 S3 S4 S5)
[    0.224256] ACPI: Using IOAPIC for interrupt routing
[    0.224374] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.225250] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.251131] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.251147] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.251320] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.253509] PCI host bridge to bus 0000:00
[    0.253516] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.253520] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.253524] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.253528] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.253532] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[    0.253536] pci_bus 0000:00: root bus resource [mem 0x7be00001-0x7bffffff window]
[    0.253539] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
[    0.253543] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[    0.253547] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.253570] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
[    0.254358] pci 0000:00:00.1: [8086:5a8c] type 00 class 0x118000
[    0.254410] pci 0000:00:00.1: reg 0x10: [mem 0x91510000-0x91517fff 64bit]
[    0.255226] pci 0000:00:02.0: [8086:5a84] type 00 class 0x030000
[    0.255253] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.255268] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.255279] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.255317] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.256127] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300
[    0.256176] pci 0000:00:0e.0: reg 0x10: [mem 0x91518000-0x9151bfff 64bit]
[    0.256232] pci 0000:00:0e.0: reg 0x20: [mem 0x91200000-0x912fffff 64bit]
[    0.256330] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[    0.257142] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
[    0.257195] pci 0000:00:0f.0: reg 0x10: [mem 0x91523000-0x91523fff 64bit]
[    0.257355] pci 0000:00:0f.0: PME# supported from D3hot
[    0.258048] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
[    0.258078] pci 0000:00:12.0: reg 0x10: [mem 0x9151c000-0x9151dfff]
[    0.258091] pci 0000:00:12.0: reg 0x14: [mem 0x91520000-0x915200ff]
[    0.258103] pci 0000:00:12.0: reg 0x18: [io  0xf090-0xf097]
[    0.258115] pci 0000:00:12.0: reg 0x1c: [io  0xf080-0xf083]
[    0.258128] pci 0000:00:12.0: reg 0x20: [io  0xf060-0xf07f]
[    0.258141] pci 0000:00:12.0: reg 0x24: [mem 0x9151f000-0x9151f7ff]
[    0.258205] pci 0000:00:12.0: PME# supported from D3hot
[    0.258873] pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400
[    0.258988] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[    0.259671] pci 0000:00:13.2: [8086:5ada] type 01 class 0x060400
[    0.259783] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
[    0.260488] pci 0000:00:14.0: [8086:5ad6] type 01 class 0x060400
[    0.260610] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[    0.261326] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
[    0.261365] pci 0000:00:15.0: reg 0x10: [mem 0x91500000-0x9150ffff 64bit]
[    0.261462] pci 0000:00:15.0: PME# supported from D3hot D3cold
[    0.262187] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
[    0.262998] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
[    0.263076] pci 0000:00:1f.1: reg 0x10: [mem 0x9151e000-0x9151e0ff 64bit]
[    0.263159] pci 0000:00:1f.1: reg 0x20: [io  0xf040-0xf05f]
[    0.264196] pci 0000:01:00.0: [10ec:5287] type 00 class 0xff0000
[    0.264236] pci 0000:01:00.0: reg 0x10: [mem 0x91415000-0x91415fff]
[    0.264301] pci 0000:01:00.0: reg 0x30: [mem 0x91400000-0x9140ffff pref]
[    0.264314] pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[    0.264441] pci 0000:01:00.0: supports D1 D2
[    0.264445] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.264636] pci 0000:01:00.1: [10ec:8168] type 00 class 0x020000
[    0.264677] pci 0000:01:00.1: reg 0x10: [io  0xe000-0xe0ff]
[    0.264718] pci 0000:01:00.1: reg 0x18: [mem 0x91414000-0x91414fff 64bit]
[    0.264745] pci 0000:01:00.1: reg 0x20: [mem 0x91410000-0x91413fff 64bit]
[    0.264771] pci 0000:01:00.1: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[    0.264889] pci 0000:01:00.1: supports D1 D2
[    0.264893] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.276056] pci 0000:00:13.0: PCI bridge to [bus 01]
[    0.276065] pci 0000:00:13.0:   bridge window [io  0xe000-0xefff]
[    0.276073] pci 0000:00:13.0:   bridge window [mem 0x91400000-0x914fffff]
[    0.276352] pci 0000:02:00.0: [168c:003e] type 00 class 0x028000
[    0.276591] pci 0000:02:00.0: reg 0x10: [mem 0x91000000-0x911fffff 64bit]
[    0.277380] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.288137] pci 0000:00:13.2: PCI bridge to [bus 02]
[    0.288146] pci 0000:00:13.2:   bridge window [mem 0x91000000-0x911fffff]
[    0.288318] pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000
[    0.288355] pci 0000:03:00.0: reg 0x10: [mem 0x91300000-0x91300fff]
[    0.288425] pci 0000:03:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[    0.288538] pci 0000:03:00.0: supports D1 D2
[    0.288542] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[    0.300062] pci 0000:00:14.0: PCI bridge to [bus 03]
[    0.300071] pci 0000:00:14.0:   bridge window [mem 0x91300000-0x913fffff]
[    0.301057] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.301332] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.301619] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.301887] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.302157] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.302424] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.302691] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.302962] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.305552] ACPI: EC: interrupt unblocked
[    0.305599] ACPI: EC: event unblocked
[    0.305637] ACPI: \_SB_.PCI0.SBRG.EC__: GPE=0x2c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.305641] ACPI: \_SB_.PCI0.SBRG.EC__: Used as boot DSDT EC to handle transactions and events
[    0.306269] SCSI subsystem initialized
[    0.306309] libata version 3.00 loaded.
[    0.306309] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.306309] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.306309] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.306309] vgaarb: loaded
[    0.306309] ACPI: bus type USB registered
[    0.306309] usbcore: registered new interface driver usbfs
[    0.306309] usbcore: registered new interface driver hub
[    0.306309] usbcore: registered new device driver usb
[    0.306309] EDAC MC: Ver: 3.0.0
[    0.306309] Registered efivars operations
[    0.340080] PCI: Using ACPI for IRQ routing
[    0.365653] PCI: pci_cache_line_size set to 64 bytes
[    0.365891] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
[    0.365894] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.365897] e820: reserve RAM buffer [mem 0x76915000-0x77ffffff]
[    0.365899] e820: reserve RAM buffer [mem 0x79a98000-0x7bffffff]
[    0.365903] e820: reserve RAM buffer [mem 0x7a1d4000-0x7bffffff]
[    0.365906] e820: reserve RAM buffer [mem 0x7a767000-0x7bffffff]
[    0.365908] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[    0.368002] NetLabel: Initializing
[    0.368002] NetLabel:  domain hash size = 128
[    0.368002] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.368002] NetLabel:  unlabeled traffic allowed by default
[    0.369121] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.369139] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[    0.372009] clocksource: Switched to clocksource hpet
[    0.406082] VFS: Disk quotas dquot_6.6.0
[    0.406127] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.406397] AppArmor: AppArmor Filesystem Enabled
[    0.406472] pnp: PnP ACPI init
[    0.406976] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.406981] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.406985] system 00:00: [io  0x0500-0x05fe] has been reserved
[    0.406990] system 00:00: [io  0x0600-0x061f] has been reserved
[    0.406994] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.406999] system 00:00: [io  0x3322-0x3323] has been reserved
[    0.407013] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.407111] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.407182] pnp 00:02: Plug and Play ACPI device, IDs ETD0421 PNP0f13 (active)
[    0.407618] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[    0.407623] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.407627] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.407632] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.407636] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.407640] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.407645] system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved
[    0.407649] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.407654] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.407666] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.408250] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.408849] pnp: PnP ACPI: found 5 devices
[    0.421530] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.421591] pci 0000:00:13.0: PCI bridge to [bus 01]
[    0.421598] pci 0000:00:13.0:   bridge window [io  0xe000-0xefff]
[    0.421606] pci 0000:00:13.0:   bridge window [mem 0x91400000-0x914fffff]
[    0.421618] pci 0000:00:13.2: PCI bridge to [bus 02]
[    0.421626] pci 0000:00:13.2:   bridge window [mem 0x91000000-0x911fffff]
[    0.421637] pci 0000:00:14.0: PCI bridge to [bus 03]
[    0.421644] pci 0000:00:14.0:   bridge window [mem 0x91300000-0x913fffff]
[    0.421656] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.421661] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.421665] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.421669] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.421673] pci_bus 0000:00: resource 8 [mem 0x7c000001-0x7fffffff window]
[    0.421676] pci_bus 0000:00: resource 9 [mem 0x7be00001-0x7bffffff window]
[    0.421680] pci_bus 0000:00: resource 10 [mem 0x80000000-0xcfffffff window]
[    0.421684] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xefffffff window]
[    0.421688] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.421692] pci_bus 0000:01: resource 1 [mem 0x91400000-0x914fffff]
[    0.421696] pci_bus 0000:02: resource 1 [mem 0x91000000-0x911fffff]
[    0.421700] pci_bus 0000:03: resource 1 [mem 0x91300000-0x913fffff]
[    0.421994] NET: Registered protocol family 2
[    0.422477] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.422750] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.423113] TCP: Hash tables configured (established 32768 bind 32768)
[    0.423212] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.423289] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.423458] NET: Registered protocol family 1
[    0.423507] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.424190] PCI: CLS 0 bytes, default 64
[    0.424294] Unpacking initramfs...
[    2.515615] Freeing initrd memory: 54120K
[    2.515693] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.515700] software IO TLB [mem 0x6e999000-0x72999000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    2.515792] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
[    2.515863] clocksource: Switched to clocksource tsc
[    2.516100] Scanning for low memory corruption every 60 seconds
[    2.517683] Initialise system trusted keyrings
[    2.517719] Key type blacklist registered
[    2.517798] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    2.521093] zbud: loaded
[    2.522488] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.522867] fuse init (API version 7.26)
[    2.526655] Key type asymmetric registered
[    2.526658] Asymmetric key parser 'x509' registered
[    2.526761] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    2.526841] io scheduler noop registered
[    2.526843] io scheduler deadline registered
[    2.526967] io scheduler cfq registered (default)
[    2.528312] efifb: probing for efifb
[    2.528348] efifb: framebuffer at 0x80000000, using 5632k, total 5632k
[    2.528351] efifb: mode is 1600x900x32, linelength=6400, pages=1
[    2.528353] efifb: scrolling: redraw
[    2.528357] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.539818] Console: switching to colour frame buffer device 200x56
[    2.550990] fb0: EFI VGA frame buffer device
[    2.551019] intel_idle: MWAIT substates: 0x11242020
[    2.551021] intel_idle: v0.4.1 model 0x5C
[    2.551545] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.551834] ACPI: AC Adapter [AC] (on-line)
[    2.551981] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.552043] ACPI: Power Button [PWRB]
[    2.552146] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    2.552192] ACPI: Sleep Button [SLPB]
[    2.552289] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    2.552338] ACPI: Lid Switch [LID0]
[    2.555787] ACPI: Invalid active0 threshold
[    2.556049] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.556281] thermal LNXTHERM:00: registered as thermal_zone0
[    2.556284] ACPI: Thermal Zone [TZ0] (43 C)
[    2.556740] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.557904] ACPI: Battery Slot [BAT0] (battery present)
[    2.562849] Linux agpgart interface v0.103
[    2.567376] loop: module loaded
[    2.567839] libphy: Fixed MDIO Bus: probed
[    2.567842] tun: Universal TUN/TAP device driver, 1.6
[    2.567969] PPP generic driver version 2.4.2
[    2.568159] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.568167] ehci-pci: EHCI PCI platform driver
[    2.568191] ehci-platform: EHCI generic platform driver
[    2.568215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.568219] ohci-pci: OHCI PCI platform driver
[    2.568237] ohci-platform: OHCI generic platform driver
[    2.568260] uhci_hcd: USB Universal Host Controller Interface driver
[    2.568672] xhci_hcd 0000:00:15.0: xHCI Host Controller
[    2.568691] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[    2.569823] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
[    2.569835] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[    2.570138] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.570142] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.570146] usb usb1: Product: xHCI Host Controller
[    2.570150] usb usb1: Manufacturer: Linux 4.15.0-32-generic xhci-hcd
[    2.570153] usb usb1: SerialNumber: 0000:00:15.0
[    2.570483] hub 1-0:1.0: USB hub found
[    2.570510] hub 1-0:1.0: 8 ports detected
[    2.572148] xhci_hcd 0000:00:15.0: xHCI Host Controller
[    2.572159] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[    2.572256] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    2.572261] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.572265] usb usb2: Product: xHCI Host Controller
[    2.572268] usb usb2: Manufacturer: Linux 4.15.0-32-generic xhci-hcd
[    2.572271] usb usb2: SerialNumber: 0000:00:15.0
[    2.572576] hub 2-0:1.0: USB hub found
[    2.572600] hub 2-0:1.0: 7 ports detected
[    2.574108] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.141151] i8042: Detected active multiplexing controller, rev 1.1
[    3.143049] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.143061] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    3.143135] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    3.143201] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    3.143264] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    3.143676] mousedev: PS/2 mouse device common for all mice
[    3.144193] rtc_cmos 00:04: RTC can wake from S4
[    3.144790] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    3.144906] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    3.144930] i2c /dev entries driver
[    3.145077] device-mapper: uevent: version 1.0.3
[    3.145276] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    3.145291] intel_pstate: Intel P-state driver initializing
[    3.145922] ledtrig-cpu: registered to indicate activity on CPUs
[    3.145926] EFI Variables Facility v0.08 2004-May-17
[    3.149833] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    3.186034] NET: Registered protocol family 10
[    3.193288] Segment Routing with IPv6
[    3.193322] NET: Registered protocol family 17
[    3.193479] Key type dns_resolver registered
[    3.194281] intel_rdt: Intel RDT L2 allocation detected
[    3.194310] RAS: Correctable Errors collector initialized.
[    3.194366] microcode: sig=0x506c9, pf=0x1, revision=0x2c
[    3.194553] microcode: Microcode Update Driver: v2.2.
[    3.194573] sched_clock: Marking stable (3194546139, 0)->(3167696420, 26849719)
[    3.194926] registered taskstats version 1
[    3.194940] Loading compiled-in X.509 certificates
[    3.199270] Loaded X.509 cert 'Build time autogenerated kernel key: cfed0c3f90bc86a77e51937f71922b89c4c6bbd5'
[    3.200425] Couldn't get size: 0x800000000000000e
[    3.200463] MODSIGN: Couldn't get UEFI db list
[    3.205447] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[    3.206030] Couldn't get size: 0x800000000000000e
[    3.206061] MODSIGN: Couldn't get UEFI dbx list
[    3.206101] zswap: loaded using pool lzo/zbud
[    3.212507] Key type big_key registered
[    3.212512] Key type trusted registered
[    3.215491] Key type encrypted registered
[    3.215495] AppArmor: AppArmor sha1 policy hashing enabled
[    3.215499] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    3.215526] evm: HMAC attrs: 0x1
[    3.216208]   Magic number: 14:698:18
[    3.216222]  ep_81: hash matches
[    3.216225]  ep_81: hash matches
[    3.216489] rtc_cmos 00:04: setting system clock to 2018-08-25 08:02:04 UTC (1535184124)
[    3.216673] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.216674] EDD information not available.
[    3.219776] Freeing unused kernel memory: 2408K
[    3.244101] Write protecting the kernel read-only data: 20480k
[    3.245160] Freeing unused kernel memory: 2008K
[    3.250872] Freeing unused kernel memory: 1900K
[    3.261683] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.261683] x86/mm: Checking user space page tables
[    3.272065] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.388040] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    3.411241] ahci 0000:00:12.0: version 3.0
[    3.411532] ahci 0000:00:12.0: SSS flag set, parallel bus scan disabled
[    3.412930] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.412946] r8169 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control
[    3.425158] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    3.425162] ahci 0000:00:12.0: flags: 64bit ncq sntf stag pm clo only pmp pio slum part deso sadm apst 
[    3.427222] r8169 0000:01:00.1 eth0: RTL8411 at 0x        (ptrval), 80:fa:5b:46:aa:69, XID 1c800800 IRQ 124
[    3.427226] r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.428288] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
[    3.428318] scsi host0: ahci
[    3.429087] scsi host1: ahci
[    3.429203] ata1: SATA max UDMA/133 abar m2048@0x9151f000 port 0x9151f100 irq 123
[    3.429206] ata2: SATA max UDMA/133 abar m2048@0x9151f000 port 0x9151f180 irq 123
[    3.429277] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
[    3.474939] r8169 0000:01:00.1 enp1s0f1: renamed from eth0
[    3.496107] [drm] Memory usable by graphics device = 1024M
[    3.496111] checking generic (80000000 580000) vs hw (80000000 10000000)
[    3.496112] fb: switching to inteldrmfb from EFI VGA
[    3.496147] Console: switching to colour dummy device 80x25
[    3.496344] [drm] Replacing VGA console driver
[    3.496507] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.496508] [drm] Driver supports precise vblank timestamp query.
[    3.496651] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.497076] [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)
[    3.523226] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    3.525169] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.525614] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    3.542965] usb 1-1: New USB device found, idVendor=0461, idProduct=4d20
[    3.542968] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.542970] usb 1-1: Product: USB Optical Mouse
[    3.543691] fbcon: inteldrmfb (fb0) is primary device
[    3.668069] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[    3.836244] usb 1-7: New USB device found, idVendor=04f2, idProduct=b59d
[    3.836247] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.836248] usb 1-7: Product: Chicony USB2.0 Camera
[    3.836250] usb 1-7: Manufacturer: Chicony Electronics Co.,Ltd.
[    3.836251] usb 1-7: SerialNumber: 200901010001
[    3.964065] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[    4.021228] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.021718] ata1.00: ATA-11: PH5-CE120, F/W:1.0, max UDMA/133
[    4.021720] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.022123] ata1.00: configured for UDMA/133
[    4.022452] scsi 0:0:0:0: Direct-Access     ATA      PH5-CE120        1.0  PQ: 0 ANSI: 5
[    4.022851] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.023116] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    4.023168] sd 0:0:0:0: [sda] Write Protect is off
[    4.023170] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.023218] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.025858]  sda: sda1 sda2 sda3 sda4 sda5 sda7
[    4.027158] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.113342] usb 1-8: New USB device found, idVendor=0cf3, idProduct=e300
[    4.113345] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.130162] hidraw: raw HID events driver (C) Jiri Kosina
[    4.134242] usbcore: registered new interface driver usbhid
[    4.134243] usbhid: USB HID core driver
[    4.137662] input: USB Optical Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1:1.0/0003:0461:4D20.0001/input/input11
[    4.137814] hid-generic 0003:0461:4D20.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:15.0-1/input0
[    4.289173] psmouse serio2: elantech: assuming hardware version 4 (with firmware version 0x461f00)
[    4.389059] psmouse serio2: elantech: Synaptics capabilities query result 0x20, 0x15, 0x0c.
[    4.488420] psmouse serio2: elantech: Elan sample query result 00, 7a, 75
[    4.520070] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.573994] ata2.00: ATAPI: HL-DT-ST DVDRAM GUD0N, 1.00, max UDMA/133
[    4.578255] ata2.00: configured for UDMA/133
[    4.584271] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUD0N     1.00 PQ: 0 ANSI: 5
[    4.802873] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.802875] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.803058] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.803168] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.818439] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input9
[    4.828282] [drm] RC6 on
[    5.312508] Console: switching to colour frame buffer device 200x56
[    5.334278] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.361370] random: fast init done
[    5.365978] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.365988] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.365994] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.365996] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.366005] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.366011] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.366014] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.366029] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.366211] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.366213] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.366215] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.366216] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.644028] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    5.849699] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.937599] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.956373] systemd[1]: Detected architecture x86-64.
[    5.960729] systemd[1]: Set hostname to <luc-W94-95-97PU>.
[    6.109430] systemd[1]: Reached target Remote File Systems.
[    6.109608] systemd[1]: Reached target User and Group Name Lookups.
[    6.109699] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.110032] systemd[1]: Created slice System Slice.
[    6.110214] systemd[1]: Listening on udev Control Socket.
[    6.110311] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.110403] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.155601] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[    6.168292] lp: driver loaded but no devices found
[    6.185176] ppdev: user-space parallel port driver
[    6.250025] systemd-journald[267]: Received request to flush runtime journal from PID 1
[    6.257572] Adding 1045896k swap on /swapfile.  Priority:-2 extents:5 across:1078664k SSFS
[    6.554347] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.569461] tpm tpm0: A TPM error (378) occurred get tpm pcr allocation
[    6.696276] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.740806] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.741185] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.781686] Bluetooth: Core ver 2.22
[    6.781714] NET: Registered protocol family 31
[    6.781716] Bluetooth: HCI device and connection manager initialized
[    6.781721] Bluetooth: HCI socket layer initialized
[    6.781724] Bluetooth: L2CAP socket layer initialized
[    6.781732] Bluetooth: SCO socket layer initialized
[    6.790176] media: Linux media interface: v0.10
[    6.791307] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.791311] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.791314] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    6.791315] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    6.791316] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    6.791319] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    6.791320] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    6.808245] usbcore: registered new interface driver btusb
[    6.826516] Linux video capture interface: v2.00
[    6.836641] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input14
[    6.836728] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input15
[    6.836798] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input16
[    6.836872] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input17
[    6.836944] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input18
[    6.837014] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input19
[    6.837079] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input20
[    6.865920] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    6.865922] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    6.865923] RAPL PMU: hw unit of domain package 2^-14 Joules
[    6.865924] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    6.865925] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    6.895386] SSE version of gcm_enc/dec engaged.
[    6.897138] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[    6.899838] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    6.902600] uvcvideo: Found UVC 1.00 device Chicony USB2.0 Camera (04f2:b59d)
[    6.907254] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
[    6.907258] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
[    6.907260] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
[    6.907350] input: Chicony USB2.0 Camera: Chicony  as /devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7:1.0/input/input21
[    6.907451] usbcore: registered new interface driver uvcvideo
[    6.907453] USB Video Class driver (1.1.1)
[    6.917248] random: crng init done
[    7.121142] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
[    7.121183] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
[    7.121224] EDAC pnd2: b_cr_touud_hi_pci=000000001 ret=0
[    7.121265] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
[    7.121305] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
[    7.121346] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
[    7.121387] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
[    7.121467] EDAC pnd2: b_cr_slice_channel_hash=8000000480000001 ret=0
[    7.121508] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
[    7.121549] EDAC pnd2: d_cr_drp0=0c000c007 ret=0
[    7.121588] EDAC pnd2: d_cr_drp0=000000000 ret=2
[    7.121628] EDAC pnd2: d_cr_drp0=000000000 ret=2
[    7.121668] EDAC pnd2: d_cr_drp0=000000000 ret=2
[    7.121669] EDAC pnd2: ECC disabled on channel 0
[    7.121669] EDAC pnd2: Failed to register device with error -22.
[    7.133365] intel_telemetry_core Init
[    7.153445] intel_rapl: Found RAPL domain package
[    7.153449] intel_rapl: Found RAPL domain core
[    7.153451] intel_rapl: Found RAPL domain uncore
[    7.153453] intel_rapl: Found RAPL domain dram
[    7.195462] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[    7.195495] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[    7.216175] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[    7.216180] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[    7.216761] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb
[    7.288108] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 20d869c3
[    7.875464] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[    7.878402] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[    7.879045] ath10k_pci 0000:02:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[    7.965715] ath: EEPROM regdomain: 0x6c
[    7.965718] ath: EEPROM indicates we should expect a direct regpair map
[    7.965721] ath: Country alpha2 being used: 00
[    7.965721] ath: Regpair used: 0x6c
[    7.975661] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[    9.788165] audit: type=1400 audit(1535184131.067:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=668 comm="apparmor_parser"
[    9.788170] audit: type=1400 audit(1535184131.067:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=668 comm="apparmor_parser"
[    9.788173] audit: type=1400 audit(1535184131.067:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=668 comm="apparmor_parser"
[    9.789595] audit: type=1400 audit(1535184131.067:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=669 comm="apparmor_parser"
[    9.789601] audit: type=1400 audit(1535184131.067:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=669 comm="apparmor_parser"
[    9.789835] audit: type=1400 audit(1535184131.067:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=665 comm="apparmor_parser"
[    9.789839] audit: type=1400 audit(1535184131.067:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=665 comm="apparmor_parser"
[    9.789842] audit: type=1400 audit(1535184131.067:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=665 comm="apparmor_parser"
[    9.789844] audit: type=1400 audit(1535184131.067:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=665 comm="apparmor_parser"
[    9.791884] audit: type=1400 audit(1535184131.067:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=670 comm="apparmor_parser"
[   33.893054] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   33.893057] Bluetooth: BNEP filters: protocol multicast
[   33.893064] Bluetooth: BNEP socket layer initialized
[   34.186788] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[   34.210222] r8169 0000:01:00.1 enp1s0f1: link down
[   34.210495] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[   34.216264] r8169 0000:01:00.1 enp1s0f1: link down
[   34.217267] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   35.997476] r8169 0000:01:00.1 enp1s0f1: link up
[   35.997490] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[   35.997490] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[   72.190950] Bluetooth: RFCOMM TTY layer initialized
[   72.190958] Bluetooth: RFCOMM socket layer initialized
[   72.190968] Bluetooth: RFCOMM ver 1.11
[   74.524445] rfkill: input handler disabled

Dernière modification par elleji (Le 25/08/2018, à 09:18)


celui qui ne cherche qu'à s'occuper et c'est tout ce qu'il a trouvé ...

Hors ligne

#915 Le 25/08/2018, à 09:36

alex2423

Re : fil pour elleji

J'ai regardé un peu mai j'ai rien trouvé de suspect.

Quand tu as tapé commande :

sudo reboot

Qu'est ce qui s'est passé exactement ? As tu eu un message d'erreur? Est ce que l'on t'as rendu la main?

Hors ligne

#916 Le 25/08/2018, à 09:55

elleji

Re : fil pour elleji

en fait suite à un reboot : éxécution et plus d'internet !

Dernière modification par elleji (Le 25/08/2018, à 10:07)


celui qui ne cherche qu'à s'occuper et c'est tout ce qu'il a trouvé ...

Hors ligne

#917 Le 25/08/2018, à 10:22

alex2423

Re : fil pour elleji

Où la, comment veux tu que je devine? Lorsque l'on te donnes des trucs à faire, il faut dire précisément ce qui se passe. Ton PC reboot bien. Je pensais que tu ne pouvais pas rebooter ton PC.

Maintenant je commence à comprendre, ton problème n'est pas l'impossibilité de redémarrer. Tu peux redémarrer sans problème ton PC. Ton problème est : 
1/ tu redémarre ton PC logiciellement
2/ tu es de-nouveau sur un Ubuntu chargé
3/ mais ta connexion Internet n'est pas lancé automatiquement

Par contre lorsque
1/ tu éteins ton ordinateur logiciellement avec Ubuntu
2/ puis tu appuis sur le bouton Power de ton ordi pour le rallumer
3/ tu es de-nouveau sur un Ubuntu chargé
4/ mais cette fois-ci ta connexion Internet se lance automatiquement

Tu peux confirmer que ton problème suivant STP :
ta connexion Internet ne se lance  pas  automatiquement au démarrage de Ubuntu
Est bien cela ton problème?

Dernière modification par alex2423 (Le 25/08/2018, à 10:23)

Hors ligne

#918 Le 25/08/2018, à 11:45

elleji

Re : fil pour elleji

"la connexion Internet ne se lance  pas  automatiquement au démarrage de Ubuntu" si je redémarre logiciellement  !

Dernière modification par elleji (Le 25/08/2018, à 11:57)


celui qui ne cherche qu'à s'occuper et c'est tout ce qu'il a trouvé ...

Hors ligne

#919 Le 25/08/2018, à 12:44

alex2423

Re : fil pour elleji

Très bien. C'est curieux ton histoire que le simple fait que tu redémarre ton pc logiciellement empêche la connexion automatique.

Tu es sous Ubuntu Gnome. Je pense que c'est le logiciel "Network Manager", il faudra voir à ce niveau là..
Sa doc :
https://doc.ubuntu-fr.org/network-manager

Tu utilises une connexion Ethernet ou wifi?

Hors ligne

#920 Le 25/08/2018, à 12:52

elleji

Re : fil pour elleji

ethernet


celui qui ne cherche qu'à s'occuper et c'est tout ce qu'il a trouvé ...

Hors ligne

#921 Le 25/08/2018, à 14:16

alex2423

Re : fil pour elleji

Okay
Tu n'as pas une icône en haut à droite pour activer / désactiver le réseau ? Est ce que tu peux essayer de désactiver ton réseau Ethernet puis de le réactiver? Qu'est ce que cela donne quand tu fais cela?

Hors ligne

#922 Le 25/08/2018, à 14:27

elleji

Re : fil pour elleji

ça reste pareil !
je pense que je vais éteindre ! ;-)


celui qui ne cherche qu'à s'occuper et c'est tout ce qu'il a trouvé ...

Hors ligne

#923 Le 25/08/2018, à 14:42

alex2423

Re : fil pour elleji

Je ne connais pas gnome. J'utilise  xubuntu avec Xfce. Peut être que quelqu'un pourrait te dire précisément ce qu'il faut faire sur la gestion de la connexion internet si besoin.

Quand tu n'as pas internet, tu peux donner le retour de la commande  STP

ifconfig -a

Dernière modification par alex2423 (Le 25/08/2018, à 14:44)

Hors ligne

#924 Le 25/08/2018, à 15:06

elleji

Re : fil pour elleji

ifconfig pas installé et pas de connexion internet !


celui qui ne cherche qu'à s'occuper et c'est tout ce qu'il a trouvé ...

Hors ligne

#925 Le 25/08/2018, à 15:31

alex2423

Re : fil pour elleji

Je comprends. Je viens de voir que depuis la version de 18.04, la commande ifconfig n'existe plus. Ultra relou, devoir apprendre une nouvelle commande! Pfff

https://doc.ubuntu-fr.org/tutoriel/conn … adresse_ip

Tapes la commande à la place

ip a

Cette fois-ci, tu devrais avoir un résultat. Est ce que tu pourrais le donner uniquement si tu n'as pas Internet.

Dernière modification par alex2423 (Le 25/08/2018, à 15:33)

Hors ligne