Contenu | Rechercher | Menus

Annonce

La nouvelle clé USB Ubuntu-fr est en prévente
Rendez-vous sur la boutique En Vente Libre

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#551 Le 11/03/2018, à 16:16

??

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

Le rendu de la commande étant
'/etc/fstab' -> '/etc/fstab.2018-03-10'
c'est probablement en faisant de cette façon que cela résout le problème de traduction   "copyed to" en "copié dans"
(Oui, le fichier de sortie a été automatiquement fabriqué.)

Tu peux donc faire l'étape B

Dernière modification par ?? (Le 11/03/2018, à 16:19)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#552 Le 11/03/2018, à 16:37

PPdM

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

BryBry a écrit :

Je ne comprends plus : dis-moi tu veux me dire que en passant cette commande j'ai automatiquement fait une copie ou je me trompe !

PPdM
J'avais apporté ma réponse page 11 # 263 et avec les vacances scolaires avec ma tribu envahissante et les problèmes d'instalation j'ai complétement oublier de voir avec toi. Milles excuses !!! yikes

J'ai bien étudié  son offre très  généreuse mais j'espère qu'il ne lui fera pas défaut !
On ne peut pas decement refuser une telle offre ! Merci milles fois ! Le plus facile pour nous c'est de l'envoyer par relais colis en frais à payer par le destinataire. Ça ne coûtera pas un kopec à PPdM et pour moi ce la solution la plus économique et la plus sûre.
Par contre je voudrais quand même installer le disque dur sur ma tour si c'est possible car avec les vacances mes petits enfants vont débarquer et j'aurai un 2ème pc à leur disposition.

J'habite en région parisienne aux portes du pays de "Mickey" si tu vois ce que je veux dire ! Si tu veux je te donne tous les renseignements par mail !

Tu vas là tu fais un bon d’envoi pour un colis standard de  10 kg  que tu m’envoie par mel .

Je t'avais envoyé un MP pour te l'expliquer, mais il semble que tu ne l'ai pas reçu.

Hors ligne

#553 Le 11/03/2018, à 16:54

BryBry

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

J'ai fait la suite : Gedit c'est sans problème. Quant à l'enregistrement j'espère qu'il est bon : comme prévu je l'ai fait dans Home Brybry, mais là il y avait la liste habituel de "desktop à exemples"; Sans précision, je n'ai rien choisi et il s'est donc enregistré à côté.

Voici le rendu que tu attends :

brybry@brybry-EL1200:~$ cd /home/brybry && sudo cp -v fstab  /etc/fstab
[sudo] Mot de passe de brybry : 
'fstab' -> '/etc/fstab'
brybry@brybry-EL1200:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=e3eda709-72a5-42f3-bc9b-4d6ee64845c3  /   ext4    errors=remount-ro  0  1
#
# /MY-DATA was on /dev/sda7 during installation
UUID=ed4b9c75-88dc-4c13-9ee5-0dcfbe8d79cb  /MY-DATA  ext4    defaults,nofail  0  2
#
# swap was on /dev/sda5 during installation
UUID=142f150e-7868-44be-a275-fa5ac71b0648  none  swap    sw,nofail  0  0
brybry@brybry-EL1200:~$ 

Hors ligne

#554 Le 12/03/2018, à 08:51

moko138

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

Bonjour ! Désolé de mon absence.
Oui, c'est parfait :
  bon pour la copie de sécurité
  bon pour le fstab corrigé.
smile
Tu peux redémarrer sans souci.
  - -

Merci à ?? !


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#555 Le 12/03/2018, à 10:19

BryBry

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

moko138 Tu n'as pas a être désolé pour ton absence  ; on a tous une vie privée à assumer ! Bon, j'ai redémarré mais j'en suis toujours au même point avec mes clefs usb : elles ne s'ouvrent toujours pas, le message de problèmes logiciel dont j'ai parlé au # 521 s'affiche toulours et en permanence tout comme celui de la photo # 521 qui s'affiche toujours au démarrage !!!

Hors ligne

#556 Le 12/03/2018, à 10:31

moko138

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

Rappel : ton alimentation est minimale (220 W)

Donc démarre toujours sans ton imprimante usb !!! Ni aucun périphérique usb non nécessaire !
(Normalement, sur l'EL1200, ta souris et ton clavier ne sont pas usb mais PS2 (connecteurs ronds)).
Et dès que tu arrives sur le bureau, montre

dmesg

Serai dispo dans l'après-midi.


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#557 Le 12/03/2018, à 12:59

BryBry

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

oui je veux bien mais pourquoi ce message "problèmes logiciels", et pourquoi mes clés usb ne s'ouvrent toujours pas ?

Hors ligne

#558 Le 12/03/2018, à 15:07

LeJediGris

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

moko138 a écrit :

Rappel : ton alimentation est minimale (220 W)

Donc démarre toujours sans ton imprimante usb !!! Ni aucun périphérique usb non nécessaire !
(Normalement, sur l'EL1200, ta souris et ton clavier ne sont pas usb mais PS2 (connecteurs ronds)).
Et dès que tu arrives sur le bureau, montre

dmesg

Serai dispo dans l'après-midi.

Salut,

Oui je me tue à dire que c'est lié à l'alimentation... faudrait essayer avec un Hub USB alimenté !!

A+


%NOINDEX%
Matos Asus Zenbook 3 Deluxe UX490
"Home Made" Monstro: core i7 2600+16Go de mémoire+SSD C300 128Go SATAIII+MoBo Asus P8P67 DeLuxe avec Mint 18.3
+ "Terminator", Pentium 4 avec velociraptor, A la niche, place au Core 2 2660 aussi sous Mint 18.3, Freebox Revolution

Hors ligne

#559 Le 12/03/2018, à 18:33

BryBry

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

moko138 voici le retour de la commande que tu préconises # 556 :

brybry@brybry-EL1200:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-116-generic (buildd@lgw01-amd64-021) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #140-Ubuntu SMP Mon Feb 12 21:23:04 UTC 2018 (Ubuntu 4.4.0-116.140-generic 4.4.98)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-116-generic root=UUID=e3eda709-72a5-42f3-bc9b-4d6ee64845c3 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] tseg: 0057f00000
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000057edffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000057ee0000-0x0000000057ee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000057ee3000-0x0000000057eeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000057ef0000-0x0000000057efffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000058000000-0x000000005fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: eMachines EL1200/WMCP61M, BIOS R01-A0L 09/17/2008
[    0.000000] Kernel/User page tables isolation: disabled
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x57ee0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000f3c50-0x000f3c5f] mapped at [ffff8800000f3c50]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x02215000, 0x02215fff] PGTABLE
[    0.000000] BRK [0x02216000, 0x02216fff] PGTABLE
[    0.000000] BRK [0x02217000, 0x02217fff] PGTABLE
[    0.000000] BRK [0x02218000, 0x02218fff] PGTABLE
[    0.000000] BRK [0x02219000, 0x02219fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x337ec000-0x35bedfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F8080 000014 (v00 ACRSYS)
[    0.000000] ACPI: RSDT 0x0000000057EE3000 000038 (v01 ACRSYS ACRPRDCT 42302E31 NVDA 00000000)
[    0.000000] ACPI: FACP 0x0000000057EE3080 000074 (v01 ACRSYS ACRPRDCT 42302E31 NVDA 00000000)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
[    0.000000] ACPI: DSDT 0x0000000057EE3100 006E1B (v01 ACRSYS ACRPRDCT 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x0000000057EE0000 000040
[    0.000000] ACPI: SSDT 0x0000000057EEA000 000115 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 0x0000000057EEA140 000038 (v01 ACRSYS ACRPRDCT 42302E31 NVDA 00000098)
[    0.000000] ACPI: MCFG 0x0000000057EEA180 00003C (v01 ACRSYS ACRPRDCT 42302E31 NVDA 00000000)
[    0.000000] ACPI: APIC 0x0000000057EE9F40 000098 (v01 ACRSYS ACRPRDCT 42302E31 NVDA 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000057edffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x57edb000-0x57edffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x0000000057edffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000057edffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000057edffff]
[    0.000000] On node 0 totalpages: 360062
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 5564 pages used for memmap
[    0.000000]   DMA32 zone: 356064 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[    0.000000] smpboot: Allowing 4 CPUs, 3 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x60000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 34 pages/cpu @ffff880057c00000 s99544 r8192 d31528 u524288
[    0.000000] pcpu-alloc: s99544 r8192 d31528 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 354413
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-116-generic root=UUID=e3eda709-72a5-42f3-bc9b-4d6ee64845c3 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xea000000-0xebffffff] (32MB)
[    0.000000] Aperture too small (32 MB) than (64 MB)
[    0.000000] Memory: 1361408K/1440248K available (8530K kernel code, 1309K rwdata, 3992K rodata, 1508K init, 1316K bss, 78840K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2210.104 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.20 BogoMIPS (lpj=8840416)
[    0.004022] pid_max: default: 32768 minimum: 301
[    0.004033] ACPI: Core revision 20150930
[    0.012941] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.012978] Security Framework initialized
[    0.012981] Yama: becoming mindful.
[    0.013009] AppArmor: AppArmor initialized
[    0.013284] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.015079] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.016101] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.016107] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.016593] Initializing cgroup subsys io
[    0.016601] Initializing cgroup subsys memory
[    0.016621] Initializing cgroup subsys devices
[    0.016628] Initializing cgroup subsys freezer
[    0.016633] Initializing cgroup subsys net_cls
[    0.016639] Initializing cgroup subsys perf_event
[    0.016646] Initializing cgroup subsys net_prio
[    0.016653] Initializing cgroup subsys hugetlb
[    0.016659] Initializing cgroup subsys pids
[    0.016689] FEATURE SPEC_CTRL Not Present
[    0.016691] FEATURE IBPB Not Present
[    0.016694] mce: CPU supports 5 MCE banks
[    0.016704] LVT offset 0 assigned for vector 0xf9
[    0.016710] process: using AMD E400 aware idle routine
[    0.016713] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.016715] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.016719] Spectre V2 mitigation: Mitigation: Full AMD retpoline
[    0.016721] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[    0.027428] ftrace: allocating 32186 entries in 126 pages
[    0.048321] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.048326] smpboot: Max logical packages: 4
[    0.048857] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.092000] smpboot: CPU0: AMD Athlon(tm) Processor LE-1600 (family: 0xf, model: 0x5f, stepping: 0x3)
[    0.092000] Performance Events: AMD PMU driver.
[    0.092000] ... version:                0
[    0.092000] ... bit width:              48
[    0.092000] ... generic registers:      4
[    0.092000] ... value mask:             0000ffffffffffff
[    0.092000] ... max period:             00007fffffffffff
[    0.092000] ... fixed-purpose events:   0
[    0.092000] ... event mask:             000000000000000f
[    0.092000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.092000] x86: Booted up 1 node, 1 CPUs
[    0.092000] smpboot: Total of 1 processors activated (4420.20 BogoMIPS)
[    0.092000] devtmpfs: initialized
[    0.094565] evm: security.selinux
[    0.094566] evm: security.SMACK64
[    0.094568] evm: security.SMACK64EXEC
[    0.094569] evm: security.SMACK64TRANSMUTE
[    0.094571] evm: security.SMACK64MMAP
[    0.094572] evm: security.ima
[    0.094574] evm: security.capability
[    0.094653] PM: Registering ACPI NVS region [mem 0x57ee0000-0x57ee2fff] (12288 bytes)
[    0.094747] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.094763] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.094883] pinctrl core: initialized pinctrl subsystem
[    0.095042] RTC time:  8:02:21, date: 03/12/18
[    0.095215] NET: Registered protocol family 16
[    0.095448] cpuidle: using governor ladder
[    0.095452] cpuidle: using governor menu
[    0.095455] PCCT header not found.
[    0.095461] node 0 link 0: io port [8000, ffff]
[    0.095464] TOM: 0000000060000000 aka 1536M
[    0.095467] node 0 link 0: mmio [a0000, bffff]
[    0.095471] node 0 link 0: mmio [60000000, efffffff]
[    0.095473] node 0 link 0: mmio [f4000000, fe02ffff]
[    0.095475] node 0 link 0: mmio [f0000000, f03fffff]
[    0.095478] bus: [bus 00-04] on node 0 link 0
[    0.095480] bus: 00 [io  0x0000-0xffff]
[    0.095482] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.095484] bus: 00 [mem 0x60000000-0xf3ffffff]
[    0.095486] bus: 00 [mem 0xf4000000-0xfcffffffff]
[    0.095556] ACPI: bus type PCI registered
[    0.095559] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.095652] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.095656] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.095669] PCI: Using configuration type 1 for base access
[    0.097670] ACPI: Added _OSI(Module Device)
[    0.097672] ACPI: Added _OSI(Processor Device)
[    0.097674] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.097676] ACPI: Added _OSI(Processor Aggregator Device)
[    0.102745] ACPI: Interpreter enabled
[    0.102768] ACPI: (supports S0 S3 S4 S5)
[    0.102770] ACPI: Using IOAPIC for interrupt routing
[    0.102802] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.110983] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[    0.110992] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.111160] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
[    0.111243] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.111247] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.111250] acpi PNP0A08:00: _OSC: platform willing to grant [PME AER]
[    0.111253] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.112169] PCI host bridge to bus 0000:00
[    0.112174] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.112177] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.112179] pci_bus 0000:00: root bus resource [io  0x8000-0xffff window]
[    0.112182] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.112185] pci_bus 0000:00: root bus resource [io  0x1c00-0x1c80 window]
[    0.112188] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window]
[    0.112191] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.112194] pci_bus 0000:00: root bus resource [mem 0x60000000-0xefffffff window]
[    0.112197] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfe02ffff window]
[    0.112200] pci_bus 0000:00: root bus resource [bus 00-04]
[    0.112221] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[    0.112473] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[    0.112490] pci 0000:00:01.0: reg 0x18: [io  0x1d00-0x1dff]
[    0.112611] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[    0.112627] pci 0000:00:01.1: reg 0x10: [io  0xfc00-0xfc3f]
[    0.112643] pci 0000:00:01.1: reg 0x20: [io  0x1c00-0x1c3f]
[    0.112649] pci 0000:00:01.1: reg 0x24: [io  0xf400-0xf43f]
[    0.112673] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.112778] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[    0.112898] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[    0.112910] pci 0000:00:02.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
[    0.112945] pci 0000:00:02.0: supports D1 D2
[    0.112947] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.113004] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.113059] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[    0.113074] pci 0000:00:02.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff]
[    0.113112] pci 0000:00:02.1: supports D1 D2
[    0.113115] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.113185] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.113246] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[    0.113332] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.113384] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[    0.113401] pci 0000:00:05.0: reg 0x10: [mem 0xfe024000-0xfe027fff]
[    0.113439] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.113495] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.113554] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[    0.113579] pci 0000:00:06.0: reg 0x20: [io  0xf000-0xf00f]
[    0.113590] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.113593] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.113595] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.113598] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.113707] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[    0.113722] pci 0000:00:07.0: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[    0.113727] pci 0000:00:07.0: reg 0x14: [io  0xec00-0xec07]
[    0.113757] pci 0000:00:07.0: supports D1 D2
[    0.113760] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.113817] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.113869] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[    0.113882] pci 0000:00:08.0: reg 0x10: [io  0x09f0-0x09f7]
[    0.113887] pci 0000:00:08.0: reg 0x14: [io  0x0bf0-0x0bf3]
[    0.113892] pci 0000:00:08.0: reg 0x18: [io  0x0970-0x0977]
[    0.113897] pci 0000:00:08.0: reg 0x1c: [io  0x0b70-0x0b73]
[    0.113903] pci 0000:00:08.0: reg 0x20: [io  0xd800-0xd80f]
[    0.113908] pci 0000:00:08.0: reg 0x24: [mem 0xfe02c000-0xfe02cfff]
[    0.114017] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[    0.114030] pci 0000:00:08.1: reg 0x10: [io  0x09e0-0x09e7]
[    0.114035] pci 0000:00:08.1: reg 0x14: [io  0x0be0-0x0be3]
[    0.114040] pci 0000:00:08.1: reg 0x18: [io  0x0960-0x0967]
[    0.114045] pci 0000:00:08.1: reg 0x1c: [io  0x0b60-0x0b63]
[    0.114050] pci 0000:00:08.1: reg 0x20: [io  0xc400-0xc40f]
[    0.114055] pci 0000:00:08.1: reg 0x24: [mem 0xfe02b000-0xfe02bfff]
[    0.114171] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[    0.114204] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.114260] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.114315] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[    0.114346] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.114401] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.114455] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[    0.114486] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.114542] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.114595] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000
[    0.114606] pci 0000:00:0d.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[    0.114613] pci 0000:00:0d.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.114619] pci 0000:00:0d.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit]
[    0.114626] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.114737] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.114838] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.114938] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.115037] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.115201] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[    0.115206] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    0.115209] pci 0000:00:04.0:   bridge window [mem 0xfd800000-0xfd8fffff]
[    0.115213] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
[    0.115216] pci 0000:00:04.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.115219] pci 0000:00:04.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.115222] pci 0000:00:04.0:   bridge window [io  0x8000-0xffff window] (subtractive decode)
[    0.115225] pci 0000:00:04.0:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.115228] pci 0000:00:04.0:   bridge window [io  0x1c00-0x1c80 window] (subtractive decode)
[    0.115231] pci 0000:00:04.0:   bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode)
[    0.115234] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.115237] pci 0000:00:04.0:   bridge window [mem 0x60000000-0xefffffff window] (subtractive decode)
[    0.115240] pci 0000:00:04.0:   bridge window [mem 0xf4000000-0xfe02ffff window] (subtractive decode)
[    0.115279] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.115283] pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
[    0.115287] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.115291] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.115325] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.115329] pci 0000:00:0b.0:   bridge window [io  0x9000-0x9fff]
[    0.115333] pci 0000:00:0b.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.115337] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.115374] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.115378] pci 0000:00:0c.0:   bridge window [io  0x8000-0x8fff]
[    0.115382] pci 0000:00:0c.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.115386] pci 0000:00:0c.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.116221] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.116285] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.116346] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.116407] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.116468] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.116529] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.116590] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.116651] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.116714] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
[    0.116775] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.116837] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[    0.116905] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[    0.116967] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
[    0.117028] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.117090] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15)
[    0.117151] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[    0.117212] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.117275] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[    0.117344] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[    0.117447] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.117543] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.117638] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.117733] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.117827] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.117922] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.118017] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[    0.118112] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.118207] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0, disabled.
[    0.118303] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[    0.118399] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[    0.118494] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0, disabled.
[    0.118590] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0, disabled.
[    0.118686] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0, disabled.
[    0.118782] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[    0.118878] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[    0.118974] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[    0.119071] ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0, disabled.
[    0.119167] ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0, disabled.
[    0.119463] vgaarb: setting as boot device: PCI:0000:00:0d.0
[    0.119466] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[    0.119469] vgaarb: loaded
[    0.119470] vgaarb: bridge control possible 0000:00:0d.0
[    0.119849] SCSI subsystem initialized
[    0.119922] libata version 3.00 loaded.
[    0.119956] ACPI: bus type USB registered
[    0.119979] usbcore: registered new interface driver usbfs
[    0.119994] usbcore: registered new interface driver hub
[    0.120016] usbcore: registered new device driver usb
[    0.120209] PCI: Using ACPI for IRQ routing
[    0.121659] PCI: pci_cache_line_size set to 64 bytes
[    0.121672] pci 0000:00:01.0: can't claim BAR 2 [io  0x1d00-0x1dff]: no compatible bridge window
[    0.121705] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.121708] e820: reserve RAM buffer [mem 0x57ee0000-0x57ffffff]
[    0.121880] NetLabel: Initializing
[    0.121882] NetLabel:  domain hash size = 128
[    0.121883] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.121902] NetLabel:  unlabeled traffic allowed by default
[    0.122005] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.122012] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[    0.122016] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.124070] clocksource: Switched to clocksource hpet
[    0.137272] AppArmor: AppArmor Filesystem Enabled
[    0.137391] pnp: PnP ACPI init
[    0.137667] system 00:00: [io  0x1000-0x107f] has been reserved
[    0.137671] system 00:00: [io  0x1080-0x10ff] has been reserved
[    0.137674] system 00:00: [io  0x1400-0x147f] has been reserved
[    0.137677] system 00:00: [io  0x1480-0x14ff] has been reserved
[    0.137680] system 00:00: [io  0x1800-0x187f] has been reserved
[    0.137683] system 00:00: [io  0x1880-0x18ff] has been reserved
[    0.137686] system 00:00: [io  0x2000-0x207f] has been reserved
[    0.137688] system 00:00: [io  0x2080-0x20ff] has been reserved
[    0.137695] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.137820] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.137824] system 00:01: [io  0x0295-0x0314] has been reserved
[    0.137828] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.137919] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.138409] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.138471] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.139171] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.139175] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.139307] system 00:06: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.139311] system 00:06: [mem 0xfeff0000-0xfeff00ff] has been reserved
[    0.139314] system 00:06: [mem 0x57ee0000-0x57efffff] could not be reserved
[    0.139317] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
[    0.139320] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.139323] system 00:06: [mem 0x00100000-0x57edffff] could not be reserved
[    0.139326] system 00:06: [mem 0x58000000-0x5fffffff] has been reserved
[    0.139329] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.139332] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.139335] system 00:06: [mem 0xfefff000-0xfeffffff] has been reserved
[    0.139338] system 00:06: [mem 0xfff80000-0xfff80fff] has been reserved
[    0.139341] system 00:06: [mem 0xfff90000-0xfffbffff] has been reserved
[    0.139344] system 00:06: [mem 0xfffed000-0xfffeffff] has been reserved
[    0.139348] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.139359] pnp: PnP ACPI: found 7 devices
[    0.146034] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.146067] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
[    0.146072] pci 0000:00:01.0: BAR 2: assigned [io  0x0800-0x08ff]
[    0.146078] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.146082] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    0.146086] pci 0000:00:04.0:   bridge window [mem 0xfd800000-0xfd8fffff]
[    0.146090] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
[    0.146095] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.146097] pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
[    0.146101] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.146104] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.146108] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.146111] pci 0000:00:0b.0:   bridge window [io  0x9000-0x9fff]
[    0.146115] pci 0000:00:0b.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.146118] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.146122] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.146125] pci 0000:00:0c.0:   bridge window [io  0x8000-0x8fff]
[    0.146128] pci 0000:00:0c.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.146131] pci 0000:00:0c.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.146137] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.146139] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.146142] pci_bus 0000:00: resource 6 [io  0x8000-0xffff window]
[    0.146145] pci_bus 0000:00: resource 7 [io  0x03b0-0x03df window]
[    0.146147] pci_bus 0000:00: resource 8 [io  0x1c00-0x1c80 window]
[    0.146150] pci_bus 0000:00: resource 9 [mem 0xfec80000-0xfecbffff window]
[    0.146153] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window]
[    0.146155] pci_bus 0000:00: resource 11 [mem 0x60000000-0xefffffff window]
[    0.146158] pci_bus 0000:00: resource 12 [mem 0xf4000000-0xfe02ffff window]
[    0.146161] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.146163] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff]
[    0.146166] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
[    0.146169] pci_bus 0000:01: resource 4 [io  0x0000-0x03af window]
[    0.146171] pci_bus 0000:01: resource 5 [io  0x03e0-0x0cf7 window]
[    0.146174] pci_bus 0000:01: resource 6 [io  0x8000-0xffff window]
[    0.146177] pci_bus 0000:01: resource 7 [io  0x03b0-0x03df window]
[    0.146179] pci_bus 0000:01: resource 8 [io  0x1c00-0x1c80 window]
[    0.146182] pci_bus 0000:01: resource 9 [mem 0xfec80000-0xfecbffff window]
[    0.146185] pci_bus 0000:01: resource 10 [mem 0x000a0000-0x000bffff window]
[    0.146187] pci_bus 0000:01: resource 11 [mem 0x60000000-0xefffffff window]
[    0.146190] pci_bus 0000:01: resource 12 [mem 0xf4000000-0xfe02ffff window]
[    0.146193] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.146196] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.146198] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.146201] pci_bus 0000:03: resource 0 [io  0x9000-0x9fff]
[    0.146204] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.146206] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.146209] pci_bus 0000:04: resource 0 [io  0x8000-0x8fff]
[    0.146212] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[    0.146215] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.146272] NET: Registered protocol family 2
[    0.146562] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.146705] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.146915] TCP: Hash tables configured (established 16384 bind 16384)
[    0.147042] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.147081] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.147175] NET: Registered protocol family 1
[    0.147529] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[    0.216308] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[    0.216441] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.216487] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.216542] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.216594] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.216646] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.216702] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.216761] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.216823] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.216830] pci 0000:00:0d.0: Video device with shadowed ROM
[    0.216841] PCI: CLS 64 bytes, default 64
[    0.216928] Unpacking initramfs...
[    1.057566] Freeing initrd memory: 36872K
[    1.057983] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fdb7bdb37e, max_idle_ns: 440795287942 ns
[    1.058066] Scanning for low memory corruption every 60 seconds
[    1.058582] audit: initializing netlink subsys (disabled)
[    1.058617] audit: type=2000 audit(1520841741.056:1): initialized
[    1.059028] Initialise system trusted keyring
[    1.059199] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.061667] zbud: loaded
[    1.062005] VFS: Disk quotas dquot_6.6.0
[    1.062058] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.062496] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.062891] fuse init (API version 7.23)
[    1.063111] Key type big_key registered
[    1.063134] Allocating IMA MOK and blacklist keyrings.
[    1.063525] Key type asymmetric registered
[    1.063529] Asymmetric key parser 'x509' registered
[    1.063584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.063621] io scheduler noop registered
[    1.063625] io scheduler deadline registered (default)
[    1.063674] io scheduler cfq registered
[    1.064081] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.064094] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.064254] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.064260] ACPI: Power Button [PWRB]
[    1.064333] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.064336] ACPI: Power Button [PWRF]
[    1.064728] ACPI: Invalid passive threshold
[    1.065011] thermal LNXTHERM:00: registered as thermal_zone0
[    1.065014] ACPI: Thermal Zone [THRM] (57 C)
[    1.065052] GHES: HEST is not enabled!
[    1.065206] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.067287] Linux agpgart interface v0.103
[    1.069379] loop: module loaded
[    1.069736] libphy: Fixed MDIO Bus: probed
[    1.069741] tun: Universal TUN/TAP device driver, 1.6
[    1.069742] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.069802] PPP generic driver version 2.4.2
[    1.069885] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.069891] ehci-pci: EHCI PCI platform driver
[    1.070098] ehci-pci 0000:00:02.1: EHCI Host Controller
[    1.070107] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.070120] ehci-pci 0000:00:02.1: debug port 1
[    1.070167] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    1.070192] ehci-pci 0000:00:02.1: irq 21, io mem 0xfe02e000
[    1.080018] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.080124] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.080127] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.080130] usb usb1: Product: EHCI Host Controller
[    1.080133] usb usb1: Manufacturer: Linux 4.4.0-116-generic ehci_hcd
[    1.080135] usb usb1: SerialNumber: 0000:00:02.1
[    1.080282] hub 1-0:1.0: USB hub found
[    1.080292] hub 1-0:1.0: 10 ports detected
[    1.080566] ehci-platform: EHCI generic platform driver
[    1.080583] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.080589] ohci-pci: OHCI PCI platform driver
[    1.080691] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    1.080698] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.080729] ohci-pci 0000:00:02.0: irq 22, io mem 0xfe02f000
[    1.138043] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.138047] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.138049] usb usb2: Product: OHCI PCI host controller
[    1.138052] usb usb2: Manufacturer: Linux 4.4.0-116-generic ohci_hcd
[    1.138054] usb usb2: SerialNumber: 0000:00:02.0
[    1.138175] hub 2-0:1.0: USB hub found
[    1.138185] hub 2-0:1.0: 10 ports detected
[    1.138448] ohci-platform: OHCI generic platform driver
[    1.138463] uhci_hcd: USB Universal Host Controller Interface driver
[    1.138557] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.138998] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.139004] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.139174] mousedev: PS/2 mouse device common for all mice
[    1.139372] rtc_cmos 00:02: RTC can wake from S4
[    1.139542] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.139584] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.139594] i2c /dev entries driver
[    1.139682] device-mapper: uevent: version 1.0.3
[    1.139778] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.139807] ledtrig-cpu: registered to indicate activity on CPUs
[    1.140284] NET: Registered protocol family 10
[    1.140566] NET: Registered protocol family 17
[    1.140585] Key type dns_resolver registered
[    1.140769] microcode: AMD CPU family 0xf not supported
[    1.140956] registered taskstats version 1
[    1.140976] Loading compiled-in X.509 certificates
[    1.142301] Loaded X.509 cert 'Build time autogenerated kernel key: aa84f01984fbd529c105810b59e379d349698248'
[    1.142328] zswap: loaded using pool lzo/zbud
[    1.145172] Key type trusted registered
[    1.149641] Key type encrypted registered
[    1.149655] AppArmor: AppArmor sha1 policy hashing enabled
[    1.149660] ima: No TPM chip found, activating TPM-bypass!
[    1.149695] evm: HMAC attrs: 0x1
[    1.149996]   Magic number: 10:689:17
[    1.150139] rtc_cmos 00:02: setting system clock to 2018-03-12 08:02:23 UTC (1520841743)
[    1.150314] powernow_k8: fid 0xe (2200 MHz), vid 0xc
[    1.150316] powernow_k8: fid 0xc (2000 MHz), vid 0xe
[    1.150318] powernow_k8: fid 0xa (1800 MHz), vid 0x10
[    1.150319] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[    1.150345] powernow_k8: Found 1 AMD Athlon(tm) Processor LE-1600 (1 cpu cores) (version 2.20.00)
[    1.150358] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.150360] EDD information not available.
[    1.150426] PM: Hibernation image not present or could not be loaded.
[    1.153121] Freeing unused kernel memory: 1508K
[    1.153129] Write protecting the kernel read-only data: 14336k
[    1.155061] Freeing unused kernel memory: 1700K
[    1.155496] Freeing unused kernel memory: 104K
[    1.164103] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.173072] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.173193] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.173217] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.176680] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.176720] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.190155] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.190194] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.190205] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.191596] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.191621] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.328364] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.367176] pata_amd 0000:00:06.0: version 0.4.1
[    1.371659] scsi host0: pata_amd
[    1.377433] scsi host1: pata_amd
[    1.377520] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.377523] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.377711] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.378026] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[    1.383048] Floppy drive(s): fd0 is unknown type 13 (usb?), fd1 is unknown type 15 (usb?)
[    1.392489] usb 1-9: new high-speed USB device number 2 using ehci-pci
[    1.524842] usb 1-9: New USB device found, idVendor=0bda, idProduct=8812
[    1.524848] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.524851] usb 1-9: Product: AC1200 wireless Adapter
[    1.524853] usb 1-9: Manufacturer: Realtek
[    1.524855] usb 1-9: SerialNumber: 123456
[    1.543022] ata2: port disabled--ignoring
[    1.636018] usb 1-10: new high-speed USB device number 3 using ehci-pci
[    1.900576] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:72:aa:c3:ed
[    1.900580] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    1.900715] sata_nv 0000:00:08.0: version 3.5
[    1.901014] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    1.902355] forcedeth 0000:00:07.0 enp0s7: renamed from eth0
[    1.904558] scsi host2: sata_nv
[    1.904822] scsi host3: sata_nv
[    1.904883] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
[    1.904886] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
[    1.905201] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[    1.906143] scsi host4: sata_nv
[    1.906376] scsi host5: sata_nv
[    1.906434] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23
[    1.906436] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23
[    2.226258] ata3: SATA link down (SStatus 0 SControl 300)
[    2.327087] usb 1-10: New USB device found, idVendor=0bda, idProduct=0158
[    2.327091] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.327093] usb 1-10: Product: USB2.0-CRW
[    2.327095] usb 1-10: Manufacturer: Generic
[    2.327098] usb 1-10: SerialNumber: 20060413092100000
[    2.335784] usbcore: registered new interface driver usb-storage
[    2.338789] usbcore: registered new interface driver uas
[    2.340851] ums-realtek 1-10:1.0: USB Mass Storage device detected
[    2.343602] scsi host6: usb-storage 1-10:1.0
[    2.343852] usbcore: registered new interface driver ums-realtek
[    2.380042] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.388120] ata5.00: ATAPI: HL-DT-ST DVDRAM GH15F, EG00, max UDMA/100
[    2.404112] ata5.00: configured for UDMA/100
[    2.576716] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    2.692038] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.700386] ata4.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133
[    2.700389] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.716354] ata4.00: configured for UDMA/133
[    2.716526] scsi 3:0:0:0: Direct-Access     ATA      ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5
[    2.716822] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.716825] sd 3:0:0:0: [sda] 4096-byte physical blocks
[    2.716882] sd 3:0:0:0: [sda] Write Protect is off
[    2.716885] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.716910] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.717221] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    2.721469] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH15F     EG00 PQ: 0 ANSI: 5
[    2.743734] sr 4:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.743738] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.743889] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.743964] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    2.746156]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    2.746621] sd 3:0:0:0: [sda] Attached SCSI disk
[    3.066257] ata6: SATA link down (SStatus 0 SControl 300)
[    3.352619] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.353112] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.355725] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    4.400029] floppy0: no floppy controllers found
[    4.554630] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.250484] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.250633] systemd[1]: Detected architecture x86-64.
[    5.260934] systemd[1]: Set hostname to <brybry-EL1200>.
[    5.562996] random: nonblocking pool is initialized
[    6.244932] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.245134] systemd[1]: Listening on Journal Socket.
[    6.245166] systemd[1]: Reached target Remote File Systems (Pre).
[    6.245326] systemd[1]: Created slice System Slice.
[    6.252601] systemd[1]: Starting Load Kernel Modules...
[    6.253521] systemd[1]: Started Braille Device Support.
[    6.256845] systemd[1]: Mounting Huge Pages File System...
[    6.256959] systemd[1]: Reached target Remote File Systems.
[    6.257109] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.257220] systemd[1]: Listening on udev Kernel Socket.
[    6.257259] systemd[1]: Reached target User and Group Name Lookups.
[    6.258170] systemd[1]: Started Read required files in advance.
[    6.258353] systemd[1]: Reached target Encrypted Volumes.
[    6.258490] systemd[1]: Listening on Journal Audit Socket.
[    6.258674] systemd[1]: Created slice User and Session Slice.
[    6.258752] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.259657] systemd[1]: Mounting Debug File System...
[    6.259986] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.325934] systemd[1]: Reached target Slices.
[    6.326087] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.327126] systemd[1]: Mounting POSIX Message Queue File System...
[    6.327263] systemd[1]: Listening on Syslog Socket.
[    6.331121] systemd[1]: Starting Journal Service...
[    6.331346] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.331476] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    6.331581] systemd[1]: Listening on udev Control Socket.
[    6.334213] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.335205] systemd[1]: Starting Set console keymap...
[    6.343257] systemd[1]: Starting Uncomplicated firewall...
[    6.574406] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.576054] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.587130] systemd[1]: Started Uncomplicated firewall.
[    6.697927] lp: driver loaded but no devices found
[    6.730765] ppdev: user-space parallel port driver
[    6.735457] systemd[1]: Mounted Debug File System.
[    6.735524] systemd[1]: Mounted Huge Pages File System.
[    6.735552] systemd[1]: Mounted POSIX Message Queue File System.
[    6.832230] systemd[1]: Started Load Kernel Modules.
[    6.833234] systemd[1]: Starting Apply Kernel Variables...
[    6.834276] systemd[1]: Mounting FUSE Control File System...
[    6.846412] systemd[1]: Mounted FUSE Control File System.
[    6.915989] systemd[1]: Started Journal Service.
[    8.069866] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.489785] systemd-journald[231]: Received request to flush runtime journal from PID 1
[    9.543771] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[    9.543844] i2c i2c-1: nForce2 SMBus adapter at 0xf400
[    9.552590] wmi: Mapper loaded
[    9.624901] Floppy drive(s): fd0 is unknown type 13 (usb?), fd1 is unknown type 15 (usb?)
[   10.105283] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.485751] EDAC MC: Ver: 3.0.0
[   10.486175] [drm] Initialized drm 1.1.0 20060810
[   10.506271] MCE: In-kernel MCE decoding enabled.
[   10.546730] AMD64 EDAC driver v3.4.0
[   10.546780] EDAC amd64: DRAM ECC disabled.
[   10.546785] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.552450] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   10.825454] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   10.825472] snd_hda_intel 0000:00:05.0: Disabling MSI
[   11.026404] kvm: Nested Virtualization enabled
[   11.588056] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   11.588063] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.588066] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   11.588069] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.588072] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   11.588074] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.588077] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   11.588080] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   11.588082] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   11.634886] nvidia: module license 'NVIDIA' taints kernel.
[   11.634891] Disabling lock debugging due to kernel taint
[   11.663275] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   11.683483] RTL871X: module init start
[   11.683489] RTL871X: rtl8812au v4.3.8_12175.20140902
[   11.683491] RTL871X: build time: Mar  7 2018 14:56:05
[   11.690865] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 21
[   11.690887] vgaarb: device changed decodes: PCI:0000:00:0d.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   11.694090] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:00:0d.0 on minor 0
[   11.694104] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.135  Tue Jan 17 15:26:26 PST 2017
[   11.726832] audit: type=1400 audit(1520841754.072:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=549 comm="apparmor_parser"
[   11.726855] audit: type=1400 audit(1520841754.072:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=549 comm="apparmor_parser"
[   11.768513] audit: type=1400 audit(1520841754.116:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=554 comm="apparmor_parser"
[   11.768527] audit: type=1400 audit(1520841754.116:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=554 comm="apparmor_parser"
[   11.768534] audit: type=1400 audit(1520841754.116:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=554 comm="apparmor_parser"
[   11.768541] audit: type=1400 audit(1520841754.116:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=554 comm="apparmor_parser"
[   11.821949] audit: type=1400 audit(1520841754.168:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4110/usr/lib/snapd/snap-confine" pid=555 comm="apparmor_parser"
[   11.821964] audit: type=1400 audit(1520841754.168:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4110/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=555 comm="apparmor_parser"
[   11.821972] audit: type=1400 audit(1520841754.168:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4110/usr/lib/snapd/snap-confine//snap_update_ns" pid=555 comm="apparmor_parser"
[   11.893944] audit: type=1400 audit(1520841754.240:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=556 comm="apparmor_parser"
[   12.650201] floppy0: no floppy controllers found
[   12.694594] RTL871X: rtw_ndev_init(wlan0)
[   12.694999] usbcore: registered new interface driver rtl8812au
[   12.695002] RTL871X: module init ret=0
[   13.512926] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input5
[   13.513014] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[   13.513088] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[   13.513174] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[   13.513260] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[   13.513336] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[   13.513413] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[   13.625743] rtl8812au 1-9:1.0 enx1817253526ce: renamed from wlan0
[   13.673754] acer_wmi: Acer Laptop ACPI-WMI Extras
[   13.989419] Adding 4194300k swap on /dev/sda5.  Priority:-1 extents:1 across:4194300k FS
[   22.802027] IPv6: ADDRCONF(NETDEV_UP): enx1817253526ce: link is not ready
[   23.210839] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   24.436097] IPv6: ADDRCONF(NETDEV_UP): enx1817253526ce: link is not ready
[   24.437065] cfg80211: World regulatory domain updated:
[   24.437068] cfg80211:  DFS Master region: unset
[   24.437068] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   24.437072] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   24.437073] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   24.437075] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   24.437076] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   24.437079] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   24.437080] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   24.437081] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   24.437083] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   24.452420] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   24.453050] forcedeth 0000:00:07.0 enp0s7: MSI enabled
[   24.453266] forcedeth 0000:00:07.0 enp0s7: no link during initialization
[   24.453610] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   24.610987] RTL871X: set bssid:00:00:00:00:00:00
[   24.611006] RTL871X: set ssid [g\xffffffc6isQ\xffffffffJ\xffffffec)ͺ\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9fɚ\xffffff9c8?K3QȠ\xffffffc2\xffffff8bR] fw_state=0x00000008
[   24.656287] IPv6: ADDRCONF(NETDEV_UP): enx1817253526ce: link is not ready
[   25.726424] audit_printk_skb: 75 callbacks suppressed
[   25.726431] audit: type=1400 audit(1520841768.072:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/4110/usr/lib/snapd/snap-confine" pid=1075 comm="apparmor_parser"
[   25.727006] audit: type=1400 audit(1520841768.072:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/4110/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1075 comm="apparmor_parser"
[   25.727357] audit: type=1400 audit(1520841768.072:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/4110/usr/lib/snapd/snap-confine//snap_update_ns" pid=1075 comm="apparmor_parser"
[   25.761706] audit: type=1400 audit(1520841768.108:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=1101 comm="apparmor_parser"
[   26.085376] audit: type=1400 audit(1520841768.432:41): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.minecraft.minecraft" pid=1117 comm="apparmor_parser"
[   26.242542] audit: type=1400 audit(1520841768.588:42): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.skype.skype" pid=1138 comm="apparmor_parser"
[   28.920732] RTL871X: indicate disassoc
[   29.793320] RTL871X: set ssid [freebox30] fw_state=0x00000008
[   29.793343] RTL871X: set bssid:14:0c:76:75:bf:4a
[   30.199509] RTL871X: start auth
[   30.202646] RTL871X: auth success, start assoc
[   30.206433] RTL871X: assoc success
[   30.206533] IPv6: ADDRCONF(NETDEV_CHANGE): enx1817253526ce: link becomes ready
[  103.960048] usb 2-8: new full-speed USB device number 2 using ohci-pci
[  104.176110] usb 2-8: New USB device found, idVendor=058f, idProduct=9381
[  104.176116] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  104.176119] usb 2-8: Product: Mass Storage Device
[  104.176122] usb 2-8: Manufacturer: Generic
[  104.176124] usb 2-8: SerialNumber: 00000000
[  104.179212] usb-storage 2-8:1.0: USB Mass Storage device detected
[  104.192228] scsi host7: usb-storage 2-8:1.0
[  105.201202] scsi 7:0:0:0: Direct-Access     Generic  Flash Disk       8.01 PQ: 0 ANSI: 2
[  105.208314] sd 7:0:0:0: Attached scsi generic sg3 type 0
[  105.229190] sd 7:0:0:0: [sdc] 255998 512-byte logical blocks: (131 MB/125 MiB)
[  105.242219] sd 7:0:0:0: [sdc] Write Protect is off
[  105.242226] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
[  105.255202] sd 7:0:0:0: [sdc] No Caching mode page found
[  105.255211] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  105.335229]  sdc:
[  105.380203] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 2456.968026] usb 1-10: reset high-speed USB device number 3 using ehci-pci
[ 3477.765714] usb 2-8: USB disconnect, device number 2
[ 6037.819268] perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[14625.656051] usb 1-10: reset high-speed USB device number 3 using ehci-pci
[18563.972503] RTL871X: linked_status_chk(enx1817253526ce) disconnect or roaming
[18572.157569] RTL871X: indicate disassoc
[18588.356289] IPv6: ADDRCONF(NETDEV_UP): enx1817253526ce: link is not ready
[18791.399085] RTL871X: set ssid [freebox30] fw_state=0x00000008
[18791.399109] RTL871X: set bssid:14:0c:76:75:bf:4a
[18791.435879] RTL871X: start auth
[18791.439807] RTL871X: auth success, start assoc
[18791.443975] RTL871X: assoc success
[18791.444066] IPv6: ADDRCONF(NETDEV_CHANGE): enx1817253526ce: link becomes ready
[18892.942741] RTL871X: sta recv deauth reason code(3) sta:14:0c:76:75:bf:4a, ignore = 0
[18892.946236] RTL871X: indicate disassoc
[18908.155247] IPv6: ADDRCONF(NETDEV_UP): enx1817253526ce: link is not ready
[18972.331133] RTL871X: set ssid [freebox30] fw_state=0x00000008
[18972.331156] RTL871X: set bssid:14:0c:76:75:bf:4a
[18972.476772] RTL871X: start auth
[18972.480267] RTL871X: auth success, start assoc
[18972.484291] RTL871X: assoc success
[18972.484369] IPv6: ADDRCONF(NETDEV_CHANGE): enx1817253526ce: link becomes ready
[25802.124048] usb 1-10: reset high-speed USB device number 3 using ehci-pci
[27461.204031] usb 1-10: reset high-speed USB device number 3 using ehci-pci
brybry@brybry-EL1200:~$ 

Hors ligne

#560 Le 12/03/2018, à 19:19

moko138

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

Merci. Apparemment, ton système démarre en 30" à partir du chargement du noyau.
Et il n'y a aucun message d'erreur.
  - -

Il y a un trou bizarre entre 1'45" et 41' :

[  105.380203] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 2456.968026] usb 1-10: reset high-speed USB device number 3 using ehci-pci

qui ne permet guère de comprendre ce qui se passe avec le périphérique usb
"idVendor=058f, idProduct=9381", presque inconnu de la Toile.

Mais ceci :

[  104.176122] usb 2-8: Manufacturer: Generic
(...)
[  105.229190] sd 7:0:0:0: [sdc] 255998 512-byte logical blocks: (131 MB/125 MiB)

suggère une bête contrefaçon (à moins que tu n'aies vraiment une clef de 131 Mo).

Donc je te prie de montrer

dmesg | head -853 | tail -12

%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#561 Le 12/03/2018, à 19:24

BryBry

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

Voilà :

brybry@brybry-EL1200:~$ dmesg | head -853 | tail -12
[  105.208314] sd 7:0:0:0: Attached scsi generic sg3 type 0
[  105.229190] sd 7:0:0:0: [sdc] 255998 512-byte logical blocks: (131 MB/125 MiB)
[  105.242219] sd 7:0:0:0: [sdc] Write Protect is off
[  105.242226] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
[  105.255202] sd 7:0:0:0: [sdc] No Caching mode page found
[  105.255211] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  105.335229]  sdc:
[  105.380203] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 2456.968026] usb 1-10: reset high-speed USB device number 3 using ehci-pci
[ 3477.765714] usb 2-8: USB disconnect, device number 2
[ 6037.819268] perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[14625.656051] usb 1-10: reset high-speed USB device number 3 using ehci-pci
brybry@brybry-EL1200:~$ 

Tu me parles d'une clé de 131 MB. Pour info, j'ai bien une clé usb publicitaire hynix de 130 MB qui me dépanne bien car elle, elle s'allume et s'ouvre sans problème. J'ai aussi une clé neuve Lexar de 64 GO qui je n'ai pas encore utilisé et qui semble fonctionner.contrairement aux autres que je possède (PNY, Xérox et Cibox) : alors pourquoi celles qui contiennent mes dossiers importants ne s'ouvrent-elles pas ? Pourquoi les unes et pas les autres ? Bizarre... lol

Dernière modification par BryBry (Le 12/03/2018, à 19:45)

Hors ligne

#562 Le 12/03/2018, à 19:49

moko138

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

Ok. Oublie cette "clef" pour l'instant.
  - -

Si tu veux en tester une autre,
Tu la branches, (elle seule),
tu attends 30 secondes,
puis tu nous montres :

lsusb ; echo ; lsusb -t

et

dmesg | grep -Evi "80211|dhcp|ipv6|network|ufw|wlan" | tail -25

%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#563 Le 12/03/2018, à 20:11

BryBry

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

Voilà pour la Xérox qui s'allume seulement :

brybry@brybry-EL1200:~$ lsusb ; echo ; lsusb -t
Bus 001 Device 005: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 007: ID 058f:9381 Alcor Micro Corp. 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/10p, 12M
    |__ Port 8: Dev 7, If 0, Class=Mass Storage, Driver=usb-storage, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M
    |__ Port 9: Dev 5, If 0, Class=Vendor Specific Class, Driver=rtl8812au, 480M
brybry@brybry-EL1200:~$ et
et : commande introuvable
brybry@brybry-EL1200:~$ 
brybry@brybry-EL1200:~$ dmesg | grep -Evi "80211|dhcp|ipv6|network|ufw|wlan" | tail -25
[35826.992069] usb 2-8: Product: Mass Storage Device
[35826.992074] usb 2-8: Manufacturer: Generic
[35826.992079] usb 2-8: SerialNumber: 00000000
[35826.995230] usb-storage 2-8:1.0: USB Mass Storage device detected
[35826.995814] scsi host12: usb-storage 2-8:1.0
[35827.172046] usb 2-10: new full-speed USB device number 8 using ohci-pci
[35828.000113] scsi 12:0:0:0: Direct-Access     Generic  Flash Disk       8.01 PQ: 0 ANSI: 2
[35828.001056] sd 12:0:0:0: Attached scsi generic sg2 type 0
[35828.022105] sd 12:0:0:0: [sdb] 255998 512-byte logical blocks: (131 MB/125 MiB)
[35828.033102] sd 12:0:0:0: [sdb] Write Protect is off
[35828.033111] sd 12:0:0:0: [sdb] Mode Sense: 03 00 00 00
[35828.044081] sd 12:0:0:0: [sdb] No Caching mode page found
[35828.044088] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[35828.124086]  sdb:
[35828.161091] sd 12:0:0:0: [sdb] Attached SCSI removable disk
[35832.348042] usb 2-10: device descriptor read/64, error -110
[35847.628046] usb 2-10: device descriptor read/64, error -110
[35847.908035] usb 2-10: new full-speed USB device number 9 using ohci-pci
[35853.084035] usb 2-10: device descriptor read/64, error -110
[35868.364059] usb 2-10: device descriptor read/64, error -110
[35868.644149] usb 2-10: new full-speed USB device number 10 using ohci-pci
[35879.052034] usb 2-10: device not accepting address 10, error -110
[35879.228028] usb 2-10: new full-speed USB device number 11 using ohci-pci
[35889.636037] usb 2-10: device not accepting address 11, error -110
[35889.636077] usb usb2-port10: unable to enumerate USB device
brybry@brybry-EL1200:~$ 

Maintenant pour la Cibox :

brybry@brybry-EL1200:~$ lsusb ; echo ; lsusb -t
Bus 001 Device 005: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 007: ID 058f:9381 Alcor Micro Corp. 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/10p, 12M
    |__ Port 8: Dev 7, If 0, Class=Mass Storage, Driver=usb-storage, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M
    |__ Port 9: Dev 5, If 0, Class=Vendor Specific Class, Driver=rtl8812au, 480M
brybry@brybry-EL1200:~$ et
et : commande introuvable
brybry@brybry-EL1200:~$ 
brybry@brybry-EL1200:~$ dmesg | grep -Evi "80211|dhcp|ipv6|network|ufw|wlan" | tail -25
[35826.992069] usb 2-8: Product: Mass Storage Device
[35826.992074] usb 2-8: Manufacturer: Generic
[35826.992079] usb 2-8: SerialNumber: 00000000
[35826.995230] usb-storage 2-8:1.0: USB Mass Storage device detected
[35826.995814] scsi host12: usb-storage 2-8:1.0
[35827.172046] usb 2-10: new full-speed USB device number 8 using ohci-pci
[35828.000113] scsi 12:0:0:0: Direct-Access     Generic  Flash Disk       8.01 PQ: 0 ANSI: 2
[35828.001056] sd 12:0:0:0: Attached scsi generic sg2 type 0
[35828.022105] sd 12:0:0:0: [sdb] 255998 512-byte logical blocks: (131 MB/125 MiB)
[35828.033102] sd 12:0:0:0: [sdb] Write Protect is off
[35828.033111] sd 12:0:0:0: [sdb] Mode Sense: 03 00 00 00
[35828.044081] sd 12:0:0:0: [sdb] No Caching mode page found
[35828.044088] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[35828.124086]  sdb:
[35828.161091] sd 12:0:0:0: [sdb] Attached SCSI removable disk
[35832.348042] usb 2-10: device descriptor read/64, error -110
[35847.628046] usb 2-10: device descriptor read/64, error -110
[35847.908035] usb 2-10: new full-speed USB device number 9 using ohci-pci
[35853.084035] usb 2-10: device descriptor read/64, error -110
[35868.364059] usb 2-10: device descriptor read/64, error -110
[35868.644149] usb 2-10: new full-speed USB device number 10 using ohci-pci
[35879.052034] usb 2-10: device not accepting address 10, error -110
[35879.228028] usb 2-10: new full-speed USB device number 11 using ohci-pci
[35889.636037] usb 2-10: device not accepting address 11, error -110
[35889.636077] usb usb2-port10: unable to enumerate USB device
brybry@brybry-EL1200:~$ 

On termine par la clé PNY :

brybry@brybry-EL1200:~$ lsusb ; echo ; lsusb -t
Bus 001 Device 005: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/10p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M
    |__ Port 9: Dev 5, If 0, Class=Vendor Specific Class, Driver=rtl8812au, 480M
brybry@brybry-EL1200:~$ dmesg | grep -Evi "80211|dhcp|ipv6|network|ufw|wlan" | tail -25
[35826.992074] usb 2-8: Manufacturer: Generic
[35826.992079] usb 2-8: SerialNumber: 00000000
[35826.995230] usb-storage 2-8:1.0: USB Mass Storage device detected
[35826.995814] scsi host12: usb-storage 2-8:1.0
[35827.172046] usb 2-10: new full-speed USB device number 8 using ohci-pci
[35828.000113] scsi 12:0:0:0: Direct-Access     Generic  Flash Disk       8.01 PQ: 0 ANSI: 2
[35828.001056] sd 12:0:0:0: Attached scsi generic sg2 type 0
[35828.022105] sd 12:0:0:0: [sdb] 255998 512-byte logical blocks: (131 MB/125 MiB)
[35828.033102] sd 12:0:0:0: [sdb] Write Protect is off
[35828.033111] sd 12:0:0:0: [sdb] Mode Sense: 03 00 00 00
[35828.044081] sd 12:0:0:0: [sdb] No Caching mode page found
[35828.044088] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[35828.124086]  sdb:
[35828.161091] sd 12:0:0:0: [sdb] Attached SCSI removable disk
[35832.348042] usb 2-10: device descriptor read/64, error -110
[35847.628046] usb 2-10: device descriptor read/64, error -110
[35847.908035] usb 2-10: new full-speed USB device number 9 using ohci-pci
[35853.084035] usb 2-10: device descriptor read/64, error -110
[35868.364059] usb 2-10: device descriptor read/64, error -110
[35868.644149] usb 2-10: new full-speed USB device number 10 using ohci-pci
[35879.052034] usb 2-10: device not accepting address 10, error -110
[35879.228028] usb 2-10: new full-speed USB device number 11 using ohci-pci
[35889.636037] usb 2-10: device not accepting address 11, error -110
[35889.636077] usb usb2-port10: unable to enumerate USB device
[36143.184697] usb 2-8: USB disconnect, device number 7
brybry@brybry-EL1200:~$ 

Dernière modification par BryBry (Le 12/03/2018, à 23:11)

Hors ligne

#564 Le 12/03/2018, à 20:45

moko138

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

La clé PNY
Elle n'apparaît pas du tout.
Si ça donne la même absence de réaction sur d'autres pc : direction la poubelle.
  - -

Pour la Lexar et la Cibox :
En fait, tu as copié-collé deux fois de suite les retours de la clef
"idVendor=058f" (= Alcor), "idProduct=9381" que nous avions vue précédemment et écartée.

Pour la Hynix :    (ajout en fin de #561)
Tu ne nous as rien montré non plus.


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#565 Le 12/03/2018, à 20:56

??

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

BryBry a écrit :
brybry@brybry-EL1200:~$ dmesg | grep -Evi "80211|dhcp|ipv6|network|ufw|wlan" | tail -25
[35828.124086]  sdb:
[35832.348042] usb 2-10: device descriptor read/64, error -110
[35847.628046] usb 2-10: device descriptor read/64, error -110
[35853.084035] usb 2-10: device descriptor read/64, error -110
[35868.364059] usb 2-10: device descriptor read/64, error -110
[35879.052034] usb 2-10: device not accepting address 10, error -110
[35889.636037] usb 2-10: device not accepting address 11, error -110

Bonsoir
J'interprète ces erreurs comme un manque de fourniture suffisante de puissance électrique... C'est classique pour un disque externe. Je n'avais pas encore vu pour une clé.


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#566 Le 12/03/2018, à 21:34

BryBry

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

La clé PNY j'ai des dossiers administratifs à y récupérer.

La clé Hynix c'est la clé publicitaire de 130 MB et pour elle voilà :

brybry@brybry-EL1200:~$ lsusb ; echo ; lsusb -t
Bus 001 Device 005: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
Bus 001 Device 021: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/10p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M
    |__ Port 7: Dev 21, If 0, Class=Mass Storage, Driver=usb-storage, 480M
    |__ Port 9: Dev 5, If 0, Class=Vendor Specific Class, Driver=rtl8812au, 480M
brybry@brybry-EL1200:~$ dmesg | grep -Evi "80211|dhcp|ipv6|network|ufw|wlan" | tail -25
[40505.343858] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[40505.343861] usb 1-7: Product: USB DISK
[40505.343864] usb 1-7: Manufacturer: SMI Corporation
[40505.343866] usb 1-7: SerialNumber: AA04012700407
[40505.346686] usb-storage 1-7:1.0: USB Mass Storage device detected
[40505.355132] scsi host18: usb-storage 1-7:1.0
[40505.664166] usb 1-7: USB disconnect, device number 20
[40506.252045] usb 1-7: new high-speed USB device number 21 using ehci-pci
[40506.387354] usb 1-7: New USB device found, idVendor=090c, idProduct=1000
[40506.387362] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[40506.387365] usb 1-7: Product: USB DISK
[40506.387368] usb 1-7: Manufacturer: SMI Corporation
[40506.387371] usb 1-7: SerialNumber: AA04012700407
[40506.391688] usb-storage 1-7:1.0: USB Mass Storage device detected
[40506.391980] scsi host19: usb-storage 1-7:1.0
[40507.394014] scsi 19:0:0:0: Direct-Access     SMI      USB DISK         3000 PQ: 0 ANSI: 0 CCS
[40507.397980] sd 19:0:0:0: Attached scsi generic sg2 type 0
[40507.399478] sd 19:0:0:0: [sdb] 252928 512-byte logical blocks: (129 MB/124 MiB)
[40507.400702] sd 19:0:0:0: [sdb] Write Protect is off
[40507.400708] sd 19:0:0:0: [sdb] Mode Sense: 43 00 00 00
[40507.402876] sd 19:0:0:0: [sdb] No Caching mode page found
[40507.402885] sd 19:0:0:0: [sdb] Assuming drive cache: write through
[40507.500532]  sdb: sdb1
[40507.506638] sd 19:0:0:0: [sdb] Attached SCSI removable disk
[40508.363002] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
brybry@brybry-EL1200:~$ 

Pour la Xérox :

brybry@brybry-EL1200:~$ lsusb ; echo ; lsusb -t
Bus 001 Device 005: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 012: ID 058f:9381 Alcor Micro Corp. 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/10p, 12M
    |__ Port 7: Dev 12, If 0, Class=Mass Storage, Driver=usb-storage, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M
    |__ Port 9: Dev 5, If 0, Class=Vendor Specific Class, Driver=rtl8812au, 480M
brybry@brybry-EL1200:~$ dmesg | grep -Evi "80211|dhcp|ipv6|network|ufw|wlan" | tail -25
[40947.384096] usb 2-7: Product: Mass Storage Device
[40947.384102] usb 2-7: Manufacturer: Generic
[40947.384107] usb 2-7: SerialNumber: 00000000
[40947.387269] usb-storage 2-7:1.0: USB Mass Storage device detected
[40947.387702] scsi host20: usb-storage 2-7:1.0
[40947.564033] usb 2-10: new full-speed USB device number 13 using ohci-pci
[40948.392180] scsi 20:0:0:0: Direct-Access     Generic  Flash Disk       8.01 PQ: 0 ANSI: 2
[40948.393827] sd 20:0:0:0: Attached scsi generic sg2 type 0
[40948.417315] sd 20:0:0:0: [sdb] 255998 512-byte logical blocks: (131 MB/125 MiB)
[40948.428158] sd 20:0:0:0: [sdb] Write Protect is off
[40948.428173] sd 20:0:0:0: [sdb] Mode Sense: 03 00 00 00
[40948.439153] sd 20:0:0:0: [sdb] No Caching mode page found
[40948.439170] sd 20:0:0:0: [sdb] Assuming drive cache: write through
[40948.522169]  sdb:
[40948.559121] sd 20:0:0:0: [sdb] Attached SCSI removable disk
[40952.747479] usb 2-10: device descriptor read/64, error -110
[40968.024028] usb 2-10: device descriptor read/64, error -110
[40968.304047] usb 2-10: new full-speed USB device number 14 using ohci-pci
[40973.480037] usb 2-10: device descriptor read/64, error -110
[40988.760051] usb 2-10: device descriptor read/64, error -110
[40989.040059] usb 2-10: new full-speed USB device number 15 using ohci-pci
[40999.448046] usb 2-10: device not accepting address 15, error -110
[40999.624038] usb 2-10: new full-speed USB device number 16 using ohci-pci
[41010.032025] usb 2-10: device not accepting address 16, error -110
[41010.032055] usb usb2-port10: unable to enumerate USB device
brybry@brybry-EL1200:~$ 

Dernière modification par BryBry (Le 12/03/2018, à 23:10)

Hors ligne

#567 Le 12/03/2018, à 21:44

BryBry

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

Oups ! J'ai oublié la Cibox 32 GO] :

brybry@brybry-EL1200:~$ lsusb ; echo ; lsusb -t
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/10p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M
brybry@brybry-EL1200:~$ dmesg | grep -Evi "80211|dhcp|ipv6|network|ufw|wlan" | tail -25
[40948.392180] scsi 20:0:0:0: Direct-Access     Generic  Flash Disk       8.01 PQ: 0 ANSI: 2
[40948.393827] sd 20:0:0:0: Attached scsi generic sg2 type 0
[40948.417315] sd 20:0:0:0: [sdb] 255998 512-byte logical blocks: (131 MB/125 MiB)
[40948.428158] sd 20:0:0:0: [sdb] Write Protect is off
[40948.428173] sd 20:0:0:0: [sdb] Mode Sense: 03 00 00 00
[40948.439153] sd 20:0:0:0: [sdb] No Caching mode page found
[40948.439170] sd 20:0:0:0: [sdb] Assuming drive cache: write through
[40948.522169]  sdb:
[40948.559121] sd 20:0:0:0: [sdb] Attached SCSI removable disk
[40952.747479] usb 2-10: device descriptor read/64, error -110
[40968.024028] usb 2-10: device descriptor read/64, error -110
[40968.304047] usb 2-10: new full-speed USB device number 14 using ohci-pci
[40973.480037] usb 2-10: device descriptor read/64, error -110
[40988.760051] usb 2-10: device descriptor read/64, error -110
[40989.040059] usb 2-10: new full-speed USB device number 15 using ohci-pci
[40999.448046] usb 2-10: device not accepting address 15, error -110
[40999.624038] usb 2-10: new full-speed USB device number 16 using ohci-pci
[41010.032025] usb 2-10: device not accepting address 16, error -110
[41010.032055] usb usb2-port10: unable to enumerate USB device
[41193.137277] usb 2-7: USB disconnect, device number 12
[41800.566792] usb 1-9: USB disconnect, device number 5
[41800.567269] RTL871X: indicate disassoc
[41800.567704] RTL871X: rtw_ndev_uninit(enx1817253526ce)
[41800.568341] RTL871X: rtw_cmd_thread: DriverStopped(1) SurpriseRemoved(1) break at line 565
[41800.580243] RTL871X: rtw_dev_unload: driver not in IPS
brybry@brybry-EL1200:~$ 

Je me trompe peut-ëtre, mais j'ai l'impression que c'est le même résultat que pour La lexar alors je j'ai fermé le terminal entre les 2 et que j'ai attendu 5 mn entre chaque !

Hors ligne

#568 Le 12/03/2018, à 21:51

moko138

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

??,

[35827.172046] usb 2-10: new full-speed USB device number 8 using ohci-pci

Mais
1) il n'y avait aucun "device 8" (= périphérique 8) dans lsusb :

brybry@brybry-EL1200:~$ lsusb ; echo ; lsusb -t
Bus 001 Device 005: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 007: ID 058f:9381 Alcor Micro Corp. 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Le driver ohci est mal employé : on devrait avoir soit ehci (pour usb2) soit uhci (pour usb1). (Il n'y a pas d'usb3 sur l'EL1200).

À titre de comparaison, sur la 12.04 de mon EL1300, à l'instant :

moko@12.04-sur-EL1300:~$ dmesg | grep ohci
moko@12.04-sur-EL1300:~$ dmesg | grep ehci
[301762.996042] usb 1-10: new high-speed USB device number 13 using ehci_hcd
[304757.736030] usb 1-8: reset high-speed USB device number 4 using ehci_hcd
[333110.492047] usb 1-8: reset high-speed USB device number 4 using ehci_hcd
[361957.936036] usb 1-8: reset high-speed USB device number 4 using ehci_hcd
[387652.768025] usb 1-8: reset high-speed USB device number 4 using ehci_hcd
[515566.128050] usb 1-8: reset high-speed USB device number 4 using ehci_hcd
moko@12.04-sur-EL1300:~$ dmesg | grep uhci
moko@12.04-sur-EL1300:~$ 

moko@12.04-sur-EL1300:~$ lsusb ; echo ; lsusb -t
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter           # wifi
Bus 001 Device 004: ID 1bcf:0c31 Sunplus Innovation Technology Inc. Serial-ATA bridge    # Adaptateur à 2 prises usb pour 1 DDE
Bus 001 Device 005: ID 058f:6361 Alcor Micro Corp. Multimedia Card Reader
Bus 002 Device 002: ID 05e3:0604 Genesys Logic, Inc. USB 1.1 Hub                     # HUB externe
Bus 002 Device 003: ID 045e:0084 Microsoft Corp. Basic Optical Mouse

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M   # OHCI pourtant, pour l'un des hubs INTERNES
    |__ Port 5: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M            # HUB externe
        |__ Port 1: Dev 3, If 0, Class=HID, Driver=usbhid, 1.5M       # Souris
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/10p, 480M
    |__ Port 6: Dev 3, If 0, Class=vend., Driver=rt2800usb, 480Mr      # wifi
    |__ Port 8: Dev 4, If 0, Class=stor., Driver=usb-storage, 480M     # Adaptateur à 2 prises usb pour 1 DDE

%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#569 Le 12/03/2018, à 22:01

moko138

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

La clé Hynix
est parfaitement reconnue :

Bus 001 Device 021: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M  # sur un des hubs internes
    |__ Port 7: Dev 21, If 0, Class=Mass Storage, Driver=usb-storage, 480M  # la clef Silicon Motion (précédemment Feiya Technology)

[40507.399478] sd 19:0:0:0: [sdb] 252928 512-byte logical blocks: (129 MB/124 MiB)

mais elle a besoin d'être vérifiée depuis un windows quelconque (celui de ta fille ?) et éjectée correctement :

[40508.363002] FAT-fs (sdb1): Volume was not properly unmounted

= "Le volume sdb1 N'a PAS été démonté correctement."


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#570 Le 12/03/2018, à 22:15

??

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

BryBry a écrit :

Oups ! J'ai oublié la Cibox 32 GO] :

[41193.137277] usb 2-7: USB disconnect, device number 12
[41800.566792] usb 1-9: USB disconnect, device number 5
brybry@brybry-EL1200:~$ 

Je me trompe peut-être, mais j'ai l'impression que c'est le même résultat que pour La lexar alors que j'ai fermé le terminal entre les 2 et que j'ai attendu 5 mn entre chaque !

Cette clé n'est pas correctement vue. Elle semble immédiatement déconnectée.

Nota 41800-41193 = 600 soit 10 minutes.


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#571 Le 12/03/2018, à 22:44

moko138

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

En effet la Cibox, n'apparaît même pas dans lsusb :

brybry@brybry-EL1200:~$ lsusb ; echo ; lsusb -t
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/10p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M
brybry@brybry-EL1200:~$

  - -

Pour la soi-disant Lexar Xerox :
Elle apparaît comme une Alcor ("058f") modèle" 9381" :

brybry@brybry-EL1200:~$ lsusb ; echo ; lsusb -t
Bus 001 Device 005: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 012: ID 058f:9381 Alcor Micro Corp. 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/10p, 12M
    |__ Port 7: Dev 12, If 0, Class=Mass Storage, Driver=usb-storage, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M
    |__ Port 9: Dev 5, If 0, Class=Vendor Specific Class, Driver=rtl8812au, 480M
brybry@brybry-EL1200:~$

Mais ensuite :

[40947.384102] usb 2-7: Manufacturer: Generic
[40947.384107] usb 2-7: SerialNumber: 00000000

Ça pue la contrefaçon.


Si ces deux clefs ne fonctionnent pas non plus sur d'autres pc, tu prends tes tickets de caisse et tu te fais rembourser.

Dernière modification par moko138 (Le 13/03/2018, à 01:52)


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#572 Le 12/03/2018, à 23:32

BryBry

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

Oh ! Oh !J'ai fait une erreur ce n'est pas la Léxar (qui est à peine sorti de son emballage) mais de la Xérox dont-il s'agit. Excuses-moi ! "Trop de X tue le X"...: lol Je l'ai rectifié sur mes précédents messages !
Tu dis que les clefs n'ont pas été correctement éjectées : rappelles toi la précision que j'ai apporté au # 533  :

Mais difficile d'enlever proprement la clé : comme elle n'apparaît nulle part tout comme la dongle, je ne peux pas cliquer sur éjecter pour les enlever comme je le ferais avec un cd pour le sortir du lecteur !

'est la même chose avec ma clé Hynix ou ma clé neuve Léxar que j'ai récemment essayé car dès que la clé est ouverte et que j'accède aux dossiers l'icône qui est apparue dans le lanceur disparaît aussi vite qu'elle est venue. Je dois donc quitter la clé en cliquant sur le rond rouge en haut à gauche de la fenêtre ainsi ouverte et la retirer directement car comme je l'ai déjà expliqué je me retrouve sans icône où cliquer sur éjecter pour faire les choses correctement.

Hors ligne

#573 Le 13/03/2018, à 01:39

moko138

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

1) Éjecter proprement :
Dans les conditions difficiles que tu décris, tu peux néanmoins voir si la clef est encore montée

1.1) première possibilité, en tapant

mount -l | tail -2

où mount affiche les 2 derniers volumes montés, le plus récent à la fin, et où l'option -l affiche en bout de ligne l'étiquette.
Par exemple chez moi :

/dev/sdb4 on /media/Data_HT200 type ext4 (rw,nosuid,nodev,uhelper=udisks) [Data_HT200]
/dev/sr0 on /media/ONE_HOUR_PHOTO type udf (ro,nosuid,nodev,uid=1000,gid=1000,iocharset=utf8,umask=0077,dmode=0500,uhelper=udisks) [ONE_HOUR_PHOTO]

Tu peux voir que le dernier truc monté et encore monté, c'est le DVD de "One Hour Photo".
Et que le volume précédent c'est sdb4 monté sur /media/ Data_HT200.

Donc si j'ai branché une clef après le DVD, il est certain qu'elle n'est plus montée.

  - -

Chez toi, si Nautilus n'affiche plus ta clef, mais que tu la vois dans

mount -l | tail -2

Alors elle apparaîtra comme

/dev/sdc1 on /media/brybry/****-****  type fusebulk (...)

Et pour l'éjecter, tu feras

sudo umount /dev/sdc1

  - -

1.2) Deuxième possibilité, en tapant

df -Th | grep -E "sd|Type"

Tu verras

Sys. de fichiers Type     Taille Utilisé Dispo Uti% Monté sur
/dev/sda1        ext4       50G    7,0G     40G  14% /
/dev/sda7        ext4       800G    100G   690G  16% /MY-DATA
/dev/sdc1        fat32       64G    11M     63G   1% /media/brybry/****-****

Et tu reconnaîtras ta clef (si elle est montée)
Et tu la démonteras pareillement :

sudo umount /dev/sdc1

= =


2) Si des clefs neuves sont défectueuses, c'est retour magasin !

Dernière modification par moko138 (Le 13/03/2018, à 01:50)


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#574 Le 13/03/2018, à 01:43

moko138

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

En parlant de /MY-DATA, il me revient que

/!\ nous avons encore à faire soit les "bind" soit les liens !


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#575 Le 13/03/2018, à 12:13

BryBry

Re : (RÉSOLU) Une nouvelle alerte 'affiche en permanence sur mon PC.

Les clés dont je te parle ne sont pas neuves, neuves elles ont entre 1 et 2 ans et contiennent des dossiers administratifs importants.

Quant aux clés neuves :
1) La Léxar :

brybry@brybry-EL1200:~$ lsusb ; echo ; lsusb -t 
Bus 001 Device 023: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
Bus 001 Device 026: ID 05dc:c75c Lexar Media, Inc. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/10p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M
    |__ Port 8: Dev 26, If 0, Class=Mass Storage, Driver=usb-storage, 480M
    |__ Port 9: Dev 23, If 0, Class=Vendor Specific Class, Driver=rtl8812au, 480M
brybry@brybry-EL1200:~$ dmesg | grep -Evi "80211|dhcp|ipv6|network|ufw|wlan" | tail -25
[93120.071877] sd 22:0:0:0: [sdb] 125034496 512-byte logical blocks: (64.0 GB/59.6 GiB)
[93120.073752] sd 22:0:0:0: [sdb] Write Protect is off
[93120.073762] sd 22:0:0:0: [sdb] Mode Sense: 23 00 00 00
[93120.074883] sd 22:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[93120.623463]  sdb: sdb1
[93120.629506] sd 22:0:0:0: [sdb] Attached SCSI removable disk
[93121.323216] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[93204.660523] usb 1-8: USB disconnect, device number 25
[93212.976043] usb 1-8: new high-speed USB device number 26 using ehci-pci
[93213.288741] usb 1-8: New USB device found, idVendor=05dc, idProduct=c75c
[93213.288748] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[93213.288751] usb 1-8: Product: USB Flash Drive
[93213.288754] usb 1-8: Manufacturer: Lexar
[93213.288757] usb 1-8: SerialNumber: 286B35E396C75E8E0CF0
[93213.290496] usb-storage 1-8:1.0: USB Mass Storage device detected
[93213.290756] scsi host23: usb-storage 1-8:1.0
[93214.691829] scsi 23:0:0:0: Direct-Access     Lexar    USB Flash Drive  8.07 PQ: 0 ANSI: 4
[93214.694762] sd 23:0:0:0: Attached scsi generic sg2 type 0
[93214.695912] sd 23:0:0:0: [sdb] 125034496 512-byte logical blocks: (64.0 GB/59.6 GiB)
[93214.697027] sd 23:0:0:0: [sdb] Write Protect is off
[93214.697037] sd 23:0:0:0: [sdb] Mode Sense: 23 00 00 00
[93214.698531] sd 23:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[93215.244598]  sdb: sdb1
[93215.250162] sd 23:0:0:0: [sdb] Attached SCSI removable disk
[93216.689884] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
brybry@brybry-EL1200:~$ 

2) La clé usb sans marque qui m'a été offert lors de l'achat de la Léxar :

brybry@brybry-EL1200:~$ lsusb ; echo ; lsusb -t
Bus 001 Device 023: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
Bus 001 Device 028: ID 048d:1234 Integrated Technology Express, Inc. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/10p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M
    |__ Port 8: Dev 28, If 0, Class=Mass Storage, Driver=usb-storage, 480M[/code
    |__ Port 9: Dev 23, If 0, Class=Vendor Specific Class, Driver=rtl8812au, 480M
brybry@brybry-EL1200:~$ dmesg | grep -Evi "80211|dhcp|ipv6|network|ufw|wlan" | tail -25
[93214.697027] sd 23:0:0:0: [sdb] Write Protect is off
[93214.697037] sd 23:0:0:0: [sdb] Mode Sense: 23 00 00 00
[93214.698531] sd 23:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[93215.244598]  sdb: sdb1
[93215.250162] sd 23:0:0:0: [sdb] Attached SCSI removable disk
[93216.689884] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[93399.998683] usb 1-8: USB disconnect, device number 26
[93400.312025] usb 1-8: new high-speed USB device number 27 using ehci-pci
[93407.360035] usb 1-8: new high-speed USB device number 28 using ehci-pci
[93407.492969] usb 1-8: New USB device found, idVendor=048d, idProduct=1234
[93407.492980] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[93407.492986] usb 1-8: Product: UDisk           
[93407.492992] usb 1-8: Manufacturer: General 
[93407.492997] usb 1-8: SerialNumber: Љ
[93407.495879] usb-storage 1-8:1.0: USB Mass Storage device detected
[93407.498586] scsi host24: usb-storage 1-8:1.0
[93408.499649] scsi 24:0:0:0: Direct-Access     General  UDisk            5.00 PQ: 0 ANSI: 2
[93408.508175] sd 24:0:0:0: Attached scsi generic sg2 type 0
[93408.508775] sd 24:0:0:0: [sdb] 131072000 512-byte logical blocks: (67.1 GB/62.5 GiB)
[93408.510261] sd 24:0:0:0: [sdb] Write Protect is off
[93408.510268] sd 24:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[93408.510962] sd 24:0:0:0: [sdb] No Caching mode page found
[93408.510968] sd 24:0:0:0: [sdb] Assuming drive cache: write through
[93408.516494]  sdb: sdb1
[93408.519090] sd 24:0:0:0: [sdb] Attached SCSI removable disk
brybry@brybry-EL1200:~$
 

Ce qui est étonnant c'est que même lorsque j'ouvre les 3 clés qui fonctionnent (les 2 ci-dessus et la clé Hynix) la fenêtre "impossible de monter le volume de.....GB ou MB" (selon le CAS) continue d'apparaître et ne se ferme que lorsque j'éjecte la clé !

Maintenant je vais rebrancher les 3 autres clés et les éjecter selon tes consignes pour voir ce qui se passe !

Hors ligne