Contenu | Rechercher | Menus

Annonce

Ubuntu 16.04 LTS
Commandez vos DVD et clés USB Ubuntu-fr !

Pour en savoir un peu plus sur l'équipe du forum.

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

#1 Le 14/11/2017, à 09:58

OliDolly

[Résolu] Luminosité / Backlight / ERROR i915 HELP

Bonjour à tous,
Je viens vers vous car je suis passé ce weekend sur Ubuntu 17.10 (16.04 LTS avant ça) et j'ai un petit soucis avec le réglage de ma luminosité: Impossible de régler cette dernière avec les touches de mon clavier (bien que le "curseur petit soleil" s'affiche lorsque je tente de monter/baisser la luminosité).
Avec xcaliber pareil, je bouge le curseur mais aucun changement.
Pareil dans les paramètres de F.lux.
Ça me l'avait déjà fais avec la version 16.04LTS mais j'avais finalement réussi.
J'ai l'impression que le soucis vient plutôt d'un pilote ou d'un truc manquant... mais quoi!
un truc à voir avec Baclight peut-être...

Aidez-moi s'il vous plaît! sad

J'ai un packard bell easy note LS13HR, voici ce que me donne la commande lscpi -v:

olivia@olivia:~$ lspci -v
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
	Subsystem: Acer Incorporated [ALI] 2nd Generation Core Processor Family DRAM Controller
	Flags: bus master, fast devsel, latency 0
	Capabilities: <access denied>

00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Acer Incorporated [ALI] 2nd Generation Core Processor Family Integrated Graphics Controller
	Flags: bus master, fast devsel, latency 0, IRQ 25
	Memory at b0000000 (64-bit, non-prefetchable) [size=4M]
	Memory at a0000000 (64-bit, prefetchable) [size=256M]
	I/O ports at 3000 [size=64]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
	Subsystem: Acer Incorporated [ALI] 6 Series/C200 Series Chipset Family MEI Controller
	Flags: bus master, fast devsel, latency 0, IRQ 26
	Memory at b0604000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
	Flags: bus master, medium devsel, latency 0, IRQ 16
	Memory at b060a000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
	Subsystem: Acer Incorporated [ALI] 6 Series/C200 Series Chipset Family High Definition Audio Controller
	Flags: bus master, fast devsel, latency 0, IRQ 27
	Memory at b0600000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 17
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: b0500000-b05fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: b0400000-b04fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
	Flags: bus master, medium devsel, latency 0, IRQ 23
	Memory at b0609000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
	Subsystem: Acer Incorporated [ALI] HM65 Express Chipset Family LPC Controller
	Flags: bus master, medium devsel, latency 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Acer Incorporated [ALI] 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 24
	I/O ports at 3088 [size=8]
	I/O ports at 309c [size=4]
	I/O ports at 3080 [size=8]
	I/O ports at 3098 [size=4]
	I/O ports at 3060 [size=32]
	Memory at b0608000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
	Subsystem: Acer Incorporated [ALI] 6 Series/C200 Series Chipset Family SMBus Controller
	Flags: medium devsel, IRQ 7
	Memory at b0606000 (64-bit, non-prefetchable) [size=256]
	I/O ports at 3040 [size=32]
	Kernel modules: i2c_i801

02:00.0 Ethernet controller: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet (rev c0)
	Subsystem: Acer Incorporated [ALI] AR8151 v2.0 Gigabit Ethernet
	Flags: bus master, fast devsel, latency 0, IRQ 28
	Memory at b0500000 (64-bit, non-prefetchable) [size=256K]
	I/O ports at 2000 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: atl1c
	Kernel modules: atl1c

03:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
	Subsystem: Foxconn International, Inc. T77H167.00
	Flags: bus master, fast devsel, latency 0, IRQ 17
	Memory at b0400000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath9k
	Kernel modules: ath9k







Donc voilà pour ça, puis je fais dmesg, histoire de fouiner un peu et là je vois:

[ 1307.776367] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=79306 end=79307) time 338 us, min 894, max 899, scanline start 887, end 901




olivia@olivia:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x4e1 with crng_init=0
[    0.000000] Linux version 4.13.0-12-generic (buildd@lcy01-36) (gcc version 7.2.0 (Ubuntu 7.2.0-6ubuntu1)) #13-Ubuntu SMP Sat Sep 23 03:40:16 UTC 2017 (Ubuntu 4.13.0-12.13-generic 4.13.3)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-12-generic root=UUID=e8178a93-8a3f-4da2-8ec0-f51b0926c7fb ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096e3efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000096e3f000-0x0000000096ebefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000096ebf000-0x0000000096fbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000096fbf000-0x0000000096ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000096fff000-0x0000000096ffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000097000000-0x000000009f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Packard Bell EasyNote LS13HR/SJV70_HR, BIOS V1.11 05/24/2011
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x15fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 097000000 mask FFF000000 uncachable
[    0.000000]   3 base 098000000 mask FF8000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 140000000 mask FF0000000 write-back
[    0.000000]   7 base 150000000 mask FF0000000 write-back
[    0.000000]   8 base 15FE00000 mask FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x97000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff9114400fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff911440097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x28724000, 0x28724fff] PGTABLE
[    0.000000] BRK [0x28725000, 0x28725fff] PGTABLE
[    0.000000] BRK [0x28726000, 0x28726fff] PGTABLE
[    0.000000] BRK [0x28727000, 0x28727fff] PGTABLE
[    0.000000] BRK [0x28728000, 0x28728fff] PGTABLE
[    0.000000] BRK [0x28729000, 0x28729fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31f27000-0x34f8afff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x0000000096FFE120 00007C (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 0x0000000096FFC000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DSDT 0x0000000096FF0000 008F13 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: FACS 0x0000000096F6D000 000040
[    0.000000] ACPI: FACS 0x0000000096F6D000 000040
[    0.000000] ACPI: ASF! 0x0000000096FFD000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: HPET 0x0000000096FFB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: APIC 0x0000000096FFA000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MCFG 0x0000000096FF9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SLIC 0x0000000096FEF000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000096FEE000 000BC2 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: BOOT 0x0000000096FEC000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASPT 0x0000000096FE9000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000096FE8000 00090C (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000096FE7000 000996 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000015fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x15fdd2000-0x15fdfcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000015fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000096e3efff]
[    0.000000]   node   0: [mem 0x0000000096fff000-0x0000000096ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000015fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000015fdfffff]
[    0.000000] On node 0 totalpages: 1010652
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9593 pages used for memmap
[    0.000000]   DMA32 zone: 613952 pages, LIFO batch:31
[    0.000000]   Normal zone: 6136 pages used for memmap
[    0.000000]   Normal zone: 392704 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000097a00000-0x000000009f9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x96e3f000-0x96ebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x96ebf000-0x96fbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x96fbf000-0x96ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x97000000-0x9f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 39 pages/cpu @ffff91159fa00000 s119704 r8192 d31848 u262144
[    0.000000] pcpu-alloc: s119704 r8192 d31848 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 994703
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-12-generic root=UUID=e8178a93-8a3f-4da2-8ec0-f51b0926c7fb ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3839780K/4042608K available (9277K kernel code, 2478K rwdata, 3988K rodata, 2324K init, 2388K bss, 202828K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 37711 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2095.339 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.67 BogoMIPS (lpj=8381356)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.010057] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.010089] Security Framework initialized
[    0.010090] Yama: becoming mindful.
[    0.010108] AppArmor: AppArmor initialized
[    0.010833] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.011186] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.011205] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.011217] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.011442] CPU: Physical Processor ID: 0
[    0.011443] CPU: Processor Core ID: 0
[    0.011448] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.011448] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.011453] mce: CPU supports 7 MCE banks
[    0.011461] CPU0: Thermal monitoring enabled (TM1)
[    0.011471] process: using mwait in idle threads
[    0.011474] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.011475] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.011602] Freeing SMP alternatives memory: 36K
[    0.016073] smpboot: Max logical packages: 4
[    0.016151] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.016605] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.057638] TSC deadline timer enabled
[    0.057641] smpboot: CPU0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.057714] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.057739] ... version:                3
[    0.057739] ... bit width:              48
[    0.057740] ... generic registers:      4
[    0.057741] ... value mask:             0000ffffffffffff
[    0.057742] ... max period:             00007fffffffffff
[    0.057742] ... fixed-purpose events:   3
[    0.057743] ... event mask:             000000070000000f
[    0.057780] Hierarchical SRCU implementation.
[    0.058697] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.058718] smp: Bringing up secondary CPUs ...
[    0.058804] x86: Booting SMP configuration:
[    0.058806] .... node  #0, CPUs:      #1 #2 #3
[    0.064053] smp: Brought up 1 node, 4 CPUs
[    0.064053] smpboot: Total of 4 processors activated (16762.71 BogoMIPS)
[    0.067203] devtmpfs: initialized
[    0.067203] x86/mm: Memory block size: 128MB
[    0.068102] evm: security.selinux
[    0.068103] evm: security.SMACK64
[    0.068104] evm: security.SMACK64EXEC
[    0.068104] evm: security.SMACK64TRANSMUTE
[    0.068105] evm: security.SMACK64MMAP
[    0.068105] evm: security.ima
[    0.068106] evm: security.capability
[    0.068121] PM: Registering ACPI NVS region [mem 0x96ebf000-0x96fbefff] (1048576 bytes)
[    0.068121] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.068121] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.068184] pinctrl core: initialized pinctrl subsystem
[    0.068296] RTC time:  7:41:32, date: 11/14/17
[    0.068380] NET: Registered protocol family 16
[    0.068579] cpuidle: using governor ladder
[    0.068579] cpuidle: using governor menu
[    0.068579] PCCT header not found.
[    0.068579] Simple Boot Flag at 0x44 set to 0x1
[    0.068579] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.068579] ACPI: bus type PCI registered
[    0.068579] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.068579] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.068579] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.068579] PCI: Using configuration type 1 for base access
[    0.068579] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.068579] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.068579] mtrr: probably your BIOS does not setup all CPUs.
[    0.068579] mtrr: corrected configuration.
[    0.069278] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.069278] ACPI: Added _OSI(Module Device)
[    0.069278] ACPI: Added _OSI(Processor Device)
[    0.069278] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.069278] ACPI: Added _OSI(Processor Aggregator Device)
[    0.069278] ACPI: Executed 1 blocks of module-level executable AML code
[    0.073826] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.073826] ACPI: Dynamic OEM Table Load:
[    0.073826] ACPI: SSDT 0xFFFF91159A736800 00067C (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[    0.073829] ACPI: Dynamic OEM Table Load:
[    0.073829] ACPI: SSDT 0xFFFF91159A7FE800 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[    0.073829] ACPI: Dynamic OEM Table Load:
[    0.073829] ACPI: SSDT 0xFFFF91159A798000 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[    0.073829] ACPI: EC: EC started
[    0.073829] ACPI: EC: interrupt blocked
[    0.092133] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.092135] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.092137] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.092137] ACPI: Interpreter enabled
[    0.092164] ACPI: (supports S0 S3 S4 S5)
[    0.092165] ACPI: Using IOAPIC for interrupt routing
[    0.092193] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.092436] ACPI: Enabled 12 GPEs in block 00 to 3F
[    0.207869] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.207874] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.207911] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.208379] PCI host bridge to bus 0000:00
[    0.208382] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.208383] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.208384] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.208386] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[    0.208388] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.208396] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.208496] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.208508] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
[    0.208513] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.208518] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.208648] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.208686] pci 0000:00:16.0: reg 0x10: [mem 0xb0604000-0xb060400f 64bit]
[    0.208798] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.208901] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.209603] pci 0000:00:1a.0: reg 0x10: [mem 0xb060a000-0xb060a3ff]
[    0.211698] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.211793] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.211831] pci 0000:00:1b.0: reg 0x10: [mem 0xb0600000-0xb0603fff 64bit]
[    0.211960] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.212060] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.212195] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.212293] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.212427] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.212535] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.213225] pci 0000:00:1d.0: reg 0x10: [mem 0xb0609000-0xb06093ff]
[    0.215325] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.215414] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.215646] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.215680] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.215693] pci 0000:00:1f.2: reg 0x14: [io  0x309c-0x309f]
[    0.215706] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.215719] pci 0000:00:1f.2: reg 0x1c: [io  0x3098-0x309b]
[    0.215732] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.215746] pci 0000:00:1f.2: reg 0x24: [mem 0xb0608000-0xb06087ff]
[    0.215822] pci 0000:00:1f.2: PME# supported from D3hot
[    0.215905] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.215936] pci 0000:00:1f.3: reg 0x10: [mem 0xb0606000-0xb06060ff 64bit]
[    0.215973] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.216173] pci 0000:02:00.0: [1969:1083] type 00 class 0x020000
[    0.216226] pci 0000:02:00.0: reg 0x10: [mem 0xb0500000-0xb053ffff 64bit]
[    0.216244] pci 0000:02:00.0: reg 0x18: [io  0x2000-0x207f]
[    0.216420] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.228047] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.228056] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.228064] pci 0000:00:1c.0:   bridge window [mem 0xb0500000-0xb05fffff]
[    0.228191] pci 0000:03:00.0: [168c:002e] type 00 class 0x028000
[    0.228247] pci 0000:03:00.0: reg 0x10: [mem 0xb0400000-0xb040ffff 64bit]
[    0.228443] pci 0000:03:00.0: supports D1
[    0.228444] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[    0.240044] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.240057] pci 0000:00:1c.1:   bridge window [mem 0xb0400000-0xb04fffff]
[    0.296347] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.296406] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.296462] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.296517] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.296571] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.296626] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.296680] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.296734] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.296829] ACPI: EC: interrupt unblocked
[    0.296839] ACPI: EC: event unblocked
[    0.296846] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.296848] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.297080] SCSI subsystem initialized
[    0.297122] libata version 3.00 loaded.
[    0.297122] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.297122] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.297122] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.297122] vgaarb: loaded
[    0.297122] ACPI: bus type USB registered
[    0.297122] usbcore: registered new interface driver usbfs
[    0.297122] usbcore: registered new interface driver hub
[    0.297122] usbcore: registered new device driver usb
[    0.297122] EDAC MC: Ver: 3.0.0
[    0.297122] PCI: Using ACPI for IRQ routing
[    0.307684] PCI: pci_cache_line_size set to 64 bytes
[    0.307735] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.307736] e820: reserve RAM buffer [mem 0x96e3f000-0x97ffffff]
[    0.307738] e820: reserve RAM buffer [mem 0x97000000-0x97ffffff]
[    0.307739] e820: reserve RAM buffer [mem 0x15fe00000-0x15fffffff]
[    0.307838] NetLabel: Initializing
[    0.307839] NetLabel:  domain hash size = 128
[    0.307840] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.307858] NetLabel:  unlabeled traffic allowed by default
[    0.308056] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.308062] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.313022] clocksource: Switched to clocksource hpet
[    0.323971] VFS: Disk quotas dquot_6.6.0
[    0.323995] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.324115] AppArmor: AppArmor Filesystem Enabled
[    0.324164] pnp: PnP ACPI init
[    0.324307] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.324309] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.324310] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.324312] system 00:00: [io  0xffff] has been reserved
[    0.324313] system 00:00: [io  0xffff] has been reserved
[    0.324315] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.324316] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.324318] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.324322] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.324351] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.324395] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.324398] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.324431] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.324489] pnp 00:04: Plug and Play ACPI device, IDs SYN1b16 SYN1b00 SYN0002 PNP0f13 (active)
[    0.380225] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.380226] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.380228] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.380229] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.380231] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.380232] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.380234] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.380236] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.380238] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.380239] system 00:05: [mem 0x9fa00000-0x9fa00fff] has been reserved
[    0.380242] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.380442] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[    0.380443] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
[    0.380446] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.380462] pnp: PnP ACPI: found 7 devices
[    0.387213] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.387245] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.387249] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.387255] pci 0000:00:1c.0:   bridge window [mem 0xb0500000-0xb05fffff]
[    0.387267] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.387274] pci 0000:00:1c.1:   bridge window [mem 0xb0400000-0xb04fffff]
[    0.387286] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.387288] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.387289] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.387291] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[    0.387292] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.387294] pci_bus 0000:02: resource 1 [mem 0xb0500000-0xb05fffff]
[    0.387295] pci_bus 0000:03: resource 1 [mem 0xb0400000-0xb04fffff]
[    0.387385] NET: Registered protocol family 2
[    0.387544] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.387626] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.387692] TCP: Hash tables configured (established 32768 bind 32768)
[    0.387730] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.387745] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.387794] NET: Registered protocol family 1
[    0.387808] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.428203] pci 0000:02:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    0.428211] PCI: CLS 64 bytes, default 64
[    0.428256] Unpacking initramfs...
[    1.347159] Freeing initrd memory: 49552K
[    1.347184] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.347187] software IO TLB [mem 0x92e3f000-0x96e3f000] (64MB) mapped at [ffff9114d2e3f000-ffff9114d6e3efff]
[    1.347412] Scanning for low memory corruption every 60 seconds
[    1.347770] audit: initializing netlink subsys (disabled)
[    1.347826] audit: type=2000 audit(1510645293.347:1): state=initialized audit_enabled=0 res=1
[    1.348230] Initialise system trusted keyrings
[    1.348241] Key type blacklist registered
[    1.348285] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.349548] zbud: loaded
[    1.349959] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.350109] fuse init (API version 7.26)
[    1.351805] Key type asymmetric registered
[    1.351806] Asymmetric key parser 'x509' registered
[    1.351844] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.351883] io scheduler noop registered
[    1.351884] io scheduler deadline registered
[    1.351913] io scheduler cfq registered (default)
[    1.352409] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.352410] vesafb: scrolling: redraw
[    1.352412] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.352422] vesafb: framebuffer at 0xa0000000, mapped to 0xffff9f5801000000, using 3072k, total 3072k
[    1.352517] Console: switching to colour frame buffer device 128x48
[    1.352534] fb0: VESA VGA frame buffer device
[    1.352546] intel_idle: MWAIT substates: 0x21120
[    1.352547] intel_idle: v0.4.1 model 0x2A
[    1.352704] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.568218] ACPI: AC Adapter [ACAD] (off-line)
[    1.568302] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[    1.568312] ACPI: Power Button [PWRB]
[    1.568386] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input1
[    1.568414] ACPI: Lid Switch [LID0]
[    1.568444] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2
[    1.568452] ACPI: Sleep Button [SLPB]
[    1.568487] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.568612] ACPI: Power Button [PWRF]
[    1.569157] GHES: HEST is not enabled!
[    1.569339] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.016130] ACPI: Battery Slot [BAT0] (battery present)
[    2.016295] Linux agpgart interface v0.103
[    2.018320] loop: module loaded
[    2.018493] libphy: Fixed MDIO Bus: probed
[    2.018494] tun: Universal TUN/TAP device driver, 1.6
[    2.018533] PPP generic driver version 2.4.2
[    2.018579] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.018581] ehci-pci: EHCI PCI platform driver
[    2.018716] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.018722] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.018737] ehci-pci 0000:00:1a.0: debug port 2
[    2.022631] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.022651] ehci-pci 0000:00:1a.0: irq 16, io mem 0xb060a000
[    2.036029] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.036066] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.036068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.036069] usb usb1: Product: EHCI Host Controller
[    2.036070] usb usb1: Manufacturer: Linux 4.13.0-12-generic ehci_hcd
[    2.036072] usb usb1: SerialNumber: 0000:00:1a.0
[    2.036232] hub 1-0:1.0: USB hub found
[    2.036238] hub 1-0:1.0: 2 ports detected
[    2.036438] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.036443] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.036457] ehci-pci 0000:00:1d.0: debug port 2
[    2.040362] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.040371] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0609000
[    2.056026] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.056054] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.056055] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.056057] usb usb2: Product: EHCI Host Controller
[    2.056058] usb usb2: Manufacturer: Linux 4.13.0-12-generic ehci_hcd
[    2.056059] usb usb2: SerialNumber: 0000:00:1d.0
[    2.056199] hub 2-0:1.0: USB hub found
[    2.056206] hub 2-0:1.0: 2 ports detected
[    2.056299] ehci-platform: EHCI generic platform driver
[    2.056310] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.056312] ohci-pci: OHCI PCI platform driver
[    2.056320] ohci-platform: OHCI generic platform driver
[    2.056326] uhci_hcd: USB Universal Host Controller Interface driver
[    2.056377] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    2.094080] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.094084] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.094380] mousedev: PS/2 mouse device common for all mice
[    2.094859] rtc_cmos 00:01: RTC can wake from S4
[    2.095033] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.095066] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    2.095072] i2c /dev entries driver
[    2.095125] device-mapper: uevent: version 1.0.3
[    2.095192] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
[    2.095198] intel_pstate: Intel P-state driver initializing
[    2.095369] ledtrig-cpu: registered to indicate activity on CPUs
[    2.095790] NET: Registered protocol family 10
[    2.099559] Segment Routing with IPv6
[    2.099581] NET: Registered protocol family 17
[    2.099589] Key type dns_resolver registered
[    2.099879] RAS: Correctable Errors collector initialized.
[    2.099914] microcode: sig=0x206a7, pf=0x10, revision=0x29
[    2.099980] microcode: Microcode Update Driver: v2.2.
[    2.099989] sched_clock: Marking stable (2099972967, 0)->(2123655422, -23682455)
[    2.100234] registered taskstats version 1
[    2.100243] Loading compiled-in X.509 certificates
[    2.102959] Loaded X.509 cert 'Build time autogenerated kernel key: 5feeab8c84d7713cc9c6ad0c946dc3221ec2903d'
[    2.102979] zswap: loaded using pool lzo/zbud
[    2.104627] Key type big_key registered
[    2.104632] Key type trusted registered
[    2.106160] Key type encrypted registered
[    2.106164] AppArmor: AppArmor sha1 policy hashing enabled
[    2.106168] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    2.106188] evm: HMAC attrs: 0x1
[    2.106425]   Magic number: 9:954:672
[    2.106537] rtc_cmos 00:01: setting system clock to 2017-11-14 07:41:34 UTC (1510645294)
[    2.106592] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.106593] EDD information not available.
[    2.106633] PM: Hibernation image not present or could not be loaded.
[    2.109897] Freeing unused kernel memory: 2324K
[    2.109898] Write protecting the kernel read-only data: 14336k
[    2.110302] Freeing unused kernel memory: 952K
[    2.110601] Freeing unused kernel memory: 108K
[    2.112878] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.131684] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.364102] tsc: Refined TSC clocksource calibration: 2095.240 MHz
[    2.364109] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.364137] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e339fecabe, max_idle_ns: 440795202126 ns
[    2.384022] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.512840] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.512842] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.513256] hub 1-1:1.0: USB hub found
[    2.513336] hub 1-1:1.0: 6 ports detected
[    2.532832] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.532834] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.533254] hub 2-1:1.0: USB hub found
[    2.533339] hub 2-1:1.0: 6 ports detected
[    2.625742] ahci 0000:00:1f.2: version 3.0
[    2.625985] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.636096] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    2.636100] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst 
[    2.656025] scsi host0: ahci
[    2.658069] scsi host1: ahci
[    2.660837] scsi host2: ahci
[    2.660978] scsi host3: ahci
[    2.661109] scsi host4: ahci
[    2.661247] scsi host5: ahci
[    2.661315] ata1: SATA max UDMA/133 abar m2048@0xb0608000 port 0xb0608100 irq 24
[    2.661318] ata2: DUMMY
[    2.661321] ata3: SATA max UDMA/133 abar m2048@0xb0608000 port 0xb0608200 irq 24
[    2.661322] ata4: DUMMY
[    2.661323] ata5: DUMMY
[    2.661324] ata6: DUMMY
[    2.661481] atl1c 0000:02:00.0: version 1.0.1.1-NAPI
[    2.681128] atl1c 0000:02:00.0 enp2s0: renamed from eth0
[    2.686061] [drm] Memory usable by graphics device = 2048M
[    2.686064] checking generic (a0000000 300000) vs hw (a0000000 10000000)
[    2.686065] fb: switching to inteldrmfb from VESA VGA
[    2.686092] Console: switching to colour dummy device 80x25
[    2.686203] [drm] Replacing VGA console driver
[    2.692060] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.692061] [drm] Driver supports precise vblank timestamp query.
[    2.694881] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.739238] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[    2.739618] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.800094] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    2.820087] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
[    2.932079] usb 2-1.1: New USB device found, idVendor=192f, idProduct=0416
[    2.932085] usb 2-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.932089] usb 2-1.1: Product: USB Optical Mouse
[    2.936608] hidraw: raw HID events driver (C) Jiri Kosina
[    2.940813] usbcore: registered new interface driver usbhid
[    2.940814] usbhid: USB HID core driver
[    2.942624] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:192F:0416.0001/input/input7
[    2.942737] hid-generic 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[    2.959723] usb 1-1.3: New USB device found, idVendor=064e, idProduct=d20c
[    2.959727] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.959728] usb 1-1.3: Product: 1.3M HD WebCam
[    2.959730] usb 1-1.3: Manufacturer: SuYin
[    2.959731] usb 1-1.3: SerialNumber: HF2015-A821-OV01-VA-R01.01.01
[    2.975145] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.981537] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/133
[    2.981553] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.988052] ata1.00: configured for UDMA/133
[    2.988348] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[    3.020338] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.020437] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.020440] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.020462] sd 0:0:0:0: [sda] Write Protect is off
[    3.020465] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.020509] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.040011] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    3.060133] acpi device:2e: registered as cooling_device4
[    3.060246] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    3.073074] fbcon: inteldrmfb (fb0) is primary device
[    3.073146] Console: switching to colour frame buffer device 200x56
[    3.073173] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.080672]  sda: sda1 sda2 < sda5 sda6 >
[    3.081851] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.161072] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0138
[    3.161075] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.161076] usb 1-1.4: Product: USB2.0-CRW
[    3.161077] usb 1-1.4: Manufacturer: Generic
[    3.161078] usb 1-1.4: SerialNumber: 20090516388200000
[    3.170945] usbcore: registered new interface driver usb-storage
[    3.172585] usbcore: registered new interface driver uas
[    3.174094] ums-realtek 1-1.4:1.0: USB Mass Storage device detected
[    3.193106] scsi host6: usb-storage 1-1.4:1.0
[    3.193198] usbcore: registered new interface driver ums-realtek
[    3.303927] usb 1-1.4: USB disconnect, device number 4
[    3.335148] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.347654] ata3.00: ATAPI: PIONEER DVD-RW DVRTD10RS, 1.00, max UDMA/100
[    3.364639] ata3.00: configured for UDMA/100
[    3.370895] scsi 2:0:0:0: CD-ROM            PIONEER  DVD-RW DVRTD10RS 1.00 PQ: 0 ANSI: 5
[    3.388317] clocksource: Switched to clocksource tsc
[    3.390088] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.390093] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.390328] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    3.390462] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    4.140119] psmouse serio1: synaptics: queried max coordinates: x [..5774], y [..5022]
[    4.319290] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1694, fw id: 705179
[    4.387394] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.433369] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    6.120137] random: crng init done
[    6.507502] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.666006] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    6.666149] systemd[1]: Detected architecture x86-64.
[    6.675618] systemd[1]: Set hostname to <olivia>.
[    9.328819] systemd[1]: Listening on Syslog Socket.
[    9.328920] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.328993] systemd[1]: Listening on Network Service Netlink Socket.
[    9.329005] systemd[1]: Reached target User and Group Name Lookups.
[    9.329013] systemd[1]: Reached target Remote File Systems.
[    9.329158] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    9.329205] systemd[1]: Listening on Journal Socket.
[   10.225619] lp: driver loaded but no devices found
[   10.274237] ppdev: user-space parallel port driver
[   12.871606] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   13.074410] systemd-journald[272]: Received request to flush runtime journal from PID 1
[   14.419204] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   14.419206] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   14.419207] RAPL PMU: hw unit of domain package 2^-16 Joules
[   14.419207] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   14.504529] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.607979] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247)
[   14.607988] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.608003] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[   14.608009] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.608010] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[   14.608016] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.608017] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[   14.608025] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.608026] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   15.401202] acer_wmi: Acer Laptop ACPI-WMI Extras
[   15.401214] acer_wmi: Function bitmap for Communication Button: 0x1
[   15.401560] input: Acer WMI hotkeys as /devices/virtual/input/input9
[   16.213502] media: Linux media interface: v0.10
[   16.476103] Linux video capture interface: v2.00
[   16.760532] ath: phy0: ASPM enabled: 0x42
[   16.760535] ath: EEPROM regdomain: 0x65
[   16.760536] ath: EEPROM indicates we should expect a direct regpair map
[   16.760539] ath: Country alpha2 being used: 00
[   16.760540] ath: Regpair used: 0x65
[   16.761136] intel_rapl: Found RAPL domain package
[   16.761137] intel_rapl: Found RAPL domain core
[   16.761138] intel_rapl: Found RAPL domain uncore
[   16.761144] intel_rapl: RAPL package 0 domain package locked by BIOS
[   16.768740] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (064e:d20c)
[   16.773925] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[   16.773928] uvcvideo 1-1.3:1.0: Entity type for entity Extension 6 was not initialized!
[   16.773931] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[   16.774037] input: 1.3M HD WebCam: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10
[   16.774119] usbcore: registered new interface driver uvcvideo
[   16.774120] USB Video Class driver (1.1.1)
[   16.814983] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   16.986521] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   16.986991] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffff9f5800ef0000, irq=17
[   17.221976] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[   17.449309] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x598301f0
[   17.449892] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   17.449894] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   17.449895] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   17.449896] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   17.449897] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   17.449899] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x1b
[   17.449901] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   17.531877] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   17.531939] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   17.532015] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   22.085235] Adding 1998844k swap on /dev/sda1.  Priority:-1 extents:1 across:1998844k FS
[   23.103151] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   25.066583] audit: type=1400 audit(1510645317.460:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=652 comm="apparmor_parser"
[   25.066634] audit: type=1400 audit(1510645317.460:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=651 comm="apparmor_parser"
[   25.075403] audit: type=1400 audit(1510645317.468:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=654 comm="apparmor_parser"
[   25.186367] audit: type=1400 audit(1510645317.579:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=648 comm="apparmor_parser"
[   25.186371] audit: type=1400 audit(1510645317.579:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=648 comm="apparmor_parser"
[   25.186374] audit: type=1400 audit(1510645317.579:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=648 comm="apparmor_parser"
[   25.186376] audit: type=1400 audit(1510645317.579:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=648 comm="apparmor_parser"
[   25.249346] audit: type=1400 audit(1510645317.642:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=655 comm="apparmor_parser"
[   25.249351] audit: type=1400 audit(1510645317.642:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=655 comm="apparmor_parser"
[   25.281144] audit: type=1400 audit(1510645317.674:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=656 comm="apparmor_parser"
[   38.362928] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   38.387320] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   38.429440] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   38.448179] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   38.842512] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   40.741386] wlp3s0: authenticate with 00:25:15:a8:d4:ac
[   40.765936] wlp3s0: send auth to 00:25:15:a8:d4:ac (try 1/3)
[   40.782066] wlp3s0: authenticated
[   40.784081] wlp3s0: associate with 00:25:15:a8:d4:ac (try 1/3)
[   40.802569] wlp3s0: RX AssocResp from 00:25:15:a8:d4:ac (capab=0x411 status=0 aid=4)
[   40.802807] wlp3s0: associated
[   40.802827] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   81.384450] rfkill: input handler disabled
[   82.165508] do_general_protection: 12 callbacks suppressed
[   82.165513] traps: xcaliber[1442] general protection ip:7f12061a7c5b sp:7ffec28ac120 error:0 in libX11.so.6.3.0[7f1206187000+134000]
[  110.989234] wlp3s0: deauthenticating from 00:25:15:a8:d4:ac by local choice (Reason: 3=DEAUTH_LEAVING)
[  112.171980] wlp3s0: authenticate with 98:de:d0:fa:c5:21
[  112.196745] wlp3s0: send auth to 98:de:d0:fa:c5:21 (try 1/3)
[  112.199574] wlp3s0: authenticated
[  112.203407] wlp3s0: associate with 98:de:d0:fa:c5:21 (try 1/3)
[  112.207572] wlp3s0: RX AssocResp from 98:de:d0:fa:c5:21 (capab=0x431 status=0 aid=1)
[  112.207717] wlp3s0: associated
[  112.211752] ath: EEPROM regdomain: 0x80fa
[  112.211754] ath: EEPROM indicates we should expect a country code
[  112.211755] ath: doing EEPROM country->regdmn map search
[  112.211755] ath: country maps to regdmn code: 0x37
[  112.211756] ath: Country alpha2 being used: FR
[  112.211757] ath: Regpair used: 0x37
[  112.211759] ath: regdomain 0x80fa dynamically updated by country IE
[  117.599765] wlp3s0: AP 98:de:d0:fa:c5:21 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[  117.703317] wlp3s0: AP 98:de:d0:fa:c5:21 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[  136.855497] acer_wmi: Unknown function number - 4 - 1
[  137.068252] acer_wmi: Unknown function number - 4 - 0
[  137.288237] acer_wmi: Unknown function number - 4 - 0
[  137.479209] acer_wmi: Unknown function number - 4 - 0
[  137.479396] acer_wmi: Unknown function number - 4 - 0
[  137.979465] acer_wmi: Unknown function number - 4 - 1
[  137.979771] acer_wmi: Unknown function number - 4 - 1
[  138.219333] acer_wmi: Unknown function number - 4 - 2
[  138.219636] acer_wmi: Unknown function number - 4 - 2
[ 1174.625833] acer_wmi: Unknown function number - 4 - 1
[ 1174.626036] acer_wmi: Unknown function number - 4 - 1
[ 1174.873634] acer_wmi: Unknown function number - 4 - 0
[ 1174.873860] acer_wmi: Unknown function number - 4 - 0
[ 1175.617661] acer_wmi: Unknown function number - 4 - 1
[ 1175.617965] acer_wmi: Unknown function number - 4 - 1
[ 1175.825753] acer_wmi: Unknown function number - 4 - 2
[ 1175.826042] acer_wmi: Unknown function number - 4 - 2
[ 1176.025808] acer_wmi: Unknown function number - 4 - 3
[ 1176.026012] acer_wmi: Unknown function number - 4 - 3
[ 1176.213573] acer_wmi: Unknown function number - 4 - 4
[ 1176.213716] acer_wmi: Unknown function number - 4 - 4
[ 1176.645708] acer_wmi: Unknown function number - 4 - 3
[ 1176.645916] acer_wmi: Unknown function number - 4 - 3
[ 1176.873607] acer_wmi: Unknown function number - 4 - 2
[ 1176.873789] acer_wmi: Unknown function number - 4 - 2
[b][ 1307.776367] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=79306 end=79307) time 338 us, min 894, max 899, scanline start 887, end 901[/b]
[ 1360.581501] traps: xcaliber[4969] general protection ip:7f12d6063c5b sp:7ffdf5c677d0 error:0 in libX11.so.6.3.0[7f12d6043000+134000]
[ 1360.872998] traps: xcaliber[4974] general protection ip:7f344b509c5b sp:7fffb9b60d50 error:0 in libX11.so.6.3.0[7f344b4e9000+134000]
[ 1361.109720] traps: xcaliber[4979] general protection ip:7fd54a243c5b sp:7ffe8052d6f0 error:0 in libX11.so.6.3.0[7fd54a223000+134000]
[ 1361.347910] traps: xcaliber[4984] general protection ip:7fa5b4047c5b sp:7ffca67cd730 error:0 in libX11.so.6.3.0[7fa5b4027000+134000]
[ 1361.584204] traps: xcaliber[4989] general protection ip:7f0f44999c5b sp:7ffc4356c870 error:0 in libX11.so.6.3.0[7f0f44979000+134000]
[ 1361.810767] traps: xcaliber[4994] general protection ip:7fa40bfeac5b sp:7ffedc7611c0 error:0 in libX11.so.6.3.0[7fa40bfca000+134000]
[ 1362.034068] traps: xcaliber[4999] general protection ip:7fa9ae49bc5b sp:7ffc9462df70 error:0 in libX11.so.6.3.0[7fa9ae47b000+134000]
[ 1362.256991] traps: xcaliber[5004] general protection ip:7f89cce21c5b sp:7ffe2294f5e0 error:0 in libX11.so.6.3.0[7f89cce01000+134000]
[ 1367.706763] traps: xcaliber[5010] general protection ip:7f77c9415c5b sp:7ffc37de3570 error:0 in libX11.so.6.3.0[7f77c93f5000+134000]
[ 1368.305708] traps: xcaliber[5015] general protection ip:7f04b474bc5b sp:7ffc04e11290 error:0 in libX11.so.6.3.0[7f04b472b000+134000]
[ 1368.605862] traps: xcaliber[5020] general protection ip:7f7894b44c5b sp:7ffced9a9e00 error:0 in libX11.so.6.3.0[7f7894b24000+134000]
[ 1369.610239] traps: xcaliber[5025] general protection ip:7fd3ab60bc5b sp:7ffce4a615b0 error:0 in libX11.so.6.3.0[7fd3ab5eb000+134000]
[ 1369.845655] traps: xcaliber[5030] general protection ip:7f364fd7bc5b sp:7ffc736d77e0 error:0 in libX11.so.6.3.0[7f364fd5b000+134000]
[ 1370.085150] traps: xcaliber[5035] general protection ip:7f316a2c7c5b sp:7ffead8b6bd0 error:0 in libX11.so.6.3.0[7f316a2a7000+134000]
[ 1370.312498] traps: xcaliber[5040] general protection ip:7f97054bac5b sp:7fff2a7d9590 error:0 in libX11.so.6.3.0[7f970549a000+134000]
[ 1372.610564] traps: xcaliber[5045] general protection ip:7fc37076ac5b sp:7fff70b54950 error:0 in libX11.so.6.3.0[7fc37074a000+134000]
[ 1372.845081] traps: xcaliber[5050] general protection ip:7f2a4201ac5b sp:7ffeefa8a770 error:0 in libX11.so.6.3.0[7f2a41ffa000+134000]
[ 1373.083401] traps: xcaliber[5055] general protection ip:7f2ca7a70c5b sp:7ffe70cc6cf0 error:0 in libX11.so.6.3.0[7f2ca7a50000+134000]
[ 1373.308511] traps: xcaliber[5060] general protection ip:7f149c3c5c5b sp:7fff39d1c630 error:0 in libX11.so.6.3.0[7f149c3a5000+134000]
[ 1374.047264] traps: xcaliber[5065] general protection ip:7f00a56b5c5b sp:7ffe6478e780 error:0 in libX11.so.6.3.0[7f00a5695000+134000]
[ 1374.274515] traps: xcaliber[5070] general protection ip:7f029129bc5b sp:7fff56d9ce80 error:0 in libX11.so.6.3.0[7f029127b000+134000]
[ 1374.506305] traps: xcaliber[5075] general protection ip:7fb42a67dc5b sp:7ffcc47d3b90 error:0 in libX11.so.6.3.0[7fb42a65d000+134000]
[ 1377.050246] traps: xcaliber[5080] general protection ip:7f57adbddc5b sp:7ffced92f2a0 error:0 in libX11.so.6.3.0[7f57adbbd000+134000]
[ 1377.280840] traps: xcaliber[5085] general protection ip:7f7a20196c5b sp:7fff7f17c3e0 error:0 in libX11.so.6.3.0[7f7a20176000+134000]
[ 1377.506128] traps: xcaliber[5090] general protection ip:7efe73af4c5b sp:7ffd5093b060 error:0 in libX11.so.6.3.0[7efe73ad4000+134000]
[ 1377.738193] traps: xcaliber[5095] general protection ip:7f6346bfec5b sp:7fffbc80ce70 error:0 in libX11.so.6.3.0[7f6346bde000+134000]
[ 1378.617851] traps: xcaliber[5100] general protection ip:7f7dfa7b3c5b sp:7ffcd478f480 error:0 in libX11.so.6.3.0[7f7dfa793000+134000]
[ 1378.851890] traps: xcaliber[5105] general protection ip:7fc6bae93c5b sp:7ffe278be1e0 error:0 in libX11.so.6.3.0[7fc6bae73000+134000]
[ 1379.081889] traps: xcaliber[5110] general protection ip:7f050b4bcc5b sp:7ffeeddaa410 error:0 in libX11.so.6.3.0[7f050b49c000+134000]
[ 2081.576668] atkbd serio0: Unknown key pressed (translated set 2, code 0xe2 on isa0060/serio0).
[ 2081.576676] atkbd serio0: Use 'setkeycodes e062 <keycode>' to make it known.
[ 2081.592071] atkbd serio0: Unknown key released (translated set 2, code 0xe2 on isa0060/serio0).
[ 2081.592078] atkbd serio0: Use 'setkeycodes e062 <keycode>' to make it known.
[ 2198.293855] atkbd serio0: Unknown key pressed (translated set 2, code 0xe2 on isa0060/serio0).
[ 2198.293863] atkbd serio0: Use 'setkeycodes e062 <keycode>' to make it known.
[ 2198.306717] atkbd serio0: Unknown key released (translated set 2, code 0xe2 on isa0060/serio0).
[ 2198.306724] atkbd serio0: Use 'setkeycodes e062 <keycode>' to make it known.
[ 2498.029783] wlp3s0: authenticate with 98:de:d0:fa:c5:21
[ 2498.053819] wlp3s0: send auth to 98:de:d0:fa:c5:21 (try 1/3)
[ 2498.124089] wlp3s0: send auth to 98:de:d0:fa:c5:21 (try 2/3)
[ 2498.188351] wlp3s0: send auth to 98:de:d0:fa:c5:21 (try 3/3)
[ 2498.266151] wlp3s0: authentication with 98:de:d0:fa:c5:21 timed out
[ 2511.638085] wlp3s0: authenticate with 98:de:d0:fa:c5:21
[ 2511.661840] wlp3s0: send auth to 98:de:d0:fa:c5:21 (try 1/3)
[ 2511.664073] wlp3s0: authenticated
[ 2511.664424] wlp3s0: associate with 98:de:d0:fa:c5:21 (try 1/3)
[ 2511.672749] wlp3s0: RX AssocResp from 98:de:d0:fa:c5:21 (capab=0x431 status=0 aid=1)
[ 2511.672914] wlp3s0: associated
[ 2511.678480] ath: EEPROM regdomain: 0x80fa
[ 2511.678483] ath: EEPROM indicates we should expect a country code
[ 2511.678484] ath: doing EEPROM country->regdmn map search
[ 2511.678485] ath: country maps to regdmn code: 0x37
[ 2511.678486] ath: Country alpha2 being used: FR
[ 2511.678487] ath: Regpair used: 0x37
[ 2511.678489] ath: regdomain 0x80fa dynamically updated by country IE
[ 3346.071649] acer_wmi: Unknown function number - 2 - 97
[ 3348.443641] acer_wmi: Unknown function number - 2 - 97

Si quelqu'un peut m'aider à faire quelque chose, je ne comprends pas tout, mais j'aimerais vraiment pouvoir trouver la solution à mon problème de luminosité (ça fait mal aux yeux quand meme!!)


Modération : merci d'utiliser les balises code (explications ici).

Dernière modification par Ayral (Aujourd'hui à 12:14)

Hors ligne

#2 Le 15/11/2017, à 00:54

ptitjoz

Re : [Résolu] Luminosité / Backlight / ERROR i915 HELP

bonjour j'ai le même problème et en attendant j'ai fait cela https://forum.ubuntu-fr.org/viewtopic.p … #p21823249


Lubuntu 17.10 64 Bits

Hors ligne

#3 Le 15/11/2017, à 01:10

Roschan

Re : [Résolu] Luminosité / Backlight / ERROR i915 HELP

Alors je peux peut-être aider, j'ai un Packard Bell EasyNote TS13HR et je rencontre ce même problème à chaque OS que j'installe.

sudo nano /etc/default/grub

Et tu modifies la ligne GRUB_CMDLINE_LINUX_DEFAULT en y ajoutant

acpi_os=Linux acpi_backlight=vendor

(ajoute ça à l'intérieur des guillemets bien entendu)

Puis

sudo update-grub

et redémarrer.

Hors ligne

#4 Le 15/11/2017, à 08:48

OliDolly

Re : [Résolu] Luminosité / Backlight / ERROR i915 HELP

Bonjour Roschan merci beaucoup pourvotre réponse!!
Sur la line à modifier j'ai ça: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

Dois-je remplacer le "quiet splash" par ce que tu m'indiques?

Merci!

Hors ligne

#5 Le 15/11/2017, à 08:56

OliDolly

Re : [Résolu] Luminosité / Backlight / ERROR i915 HELP

Yeeeaaaaaah

j'ai rajouté à la suite de "quiet splash" entre guillements et ça marche impeccable!

Mes yeux vous dise merci beaucouuuuup! Moi également big_smile

bonne journée à vous!

Hors ligne