Contenu | Rechercher | Menus

Annonce

L'équipe des administrateurs et modérateurs du forum vous invite à prendre connaissance des nouvelles règles.
En cas de besoin, vous pouvez intervenir dans cette discussion.

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 01/03/2018, à 12:37

NewLinux2018

[Résolu] Clé WIFI EDUP (RTL8811AU)

Bonjour à tous,

Je rencontre un problème pour l'installation d'une clé WIFI EDUP

Pour connaître quel type de carte il s'agit, j'ai inséré la clé EDUP sur un poste WINDOWS.
Dans le gestionnaire de périphérique la clé est reconnu comme :
Realtek RTL8811AU Wireless LAN 802.11ac USB 2.0

Je suis sur une version Ubuntu 16.04.4 LTS \n \l d'ubuntu ou plus précisement :
Linux version 4.4.0-116-generic (buildd@lgw01-amd64-021) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #140-Ubuntu SMP Mon Feb 12 21:23:04 UTC 2018

Résultat de la commande lsusb :

Bus 002 Device 009: ID 0bda:0811 Realtek Semiconductor Corp. 
Bus 002 Device 008: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 004: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 002 Device 003: ID 413c:2107 Dell Computer Corp. 
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Résultat de la commande dmesg | tail -10
[66041.071482] usb 2-1.5: New USB device found, idVendor=0424, idProduct=2514
[66041.071487] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[66041.071916] hub 2-1.5:1.0: USB hub found
[66041.072052] hub 2-1.5:1.0: 4 ports detected
[66664.579989] usb 2-1.7: new high-speed USB device number 9 using ehci-pci
[66664.673107] usb 2-1.7: New USB device found, idVendor=0bda, idProduct=0811
[66664.673113] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[66664.673124] usb 2-1.7: Product: 802.11ac WLAN Adapter 
[66664.673127] usb 2-1.7: Manufacturer: Realtek 
[66664.673130] usb 2-1.7: SerialNumber: 00e04c000001
admposte@FRA-PST-Ubuntun:~/Downloads$ 

Résultat de la commande sudo bash install.sh le répertoire :
Comme le contenu est très long je mets juste la fin
La décompression du fichier se passe bien, il n'y a pas de message d'erreur.
Par contre pour la fin je ne vois pas comment résoudre le problème

scripts/Makefile.build:258: recipe for target '/home/admposte/Downloads/linux/driver/rtl8821AU_linux_v4.3.14_13455.20150212_BTCOEX20150128-51/core/rtw_cmd.o' failed
make[2]: *** [/home/admposte/Downloads/linux/driver/rtl8821AU_linux_v4.3.14_13455.20150212_BTCOEX20150128-51/core/rtw_cmd.o] Error 1
Makefile:1423: recipe for target '_module_/home/admposte/Downloads/linux/driver/rtl8821AU_linux_v4.3.14_13455.20150212_BTCOEX20150128-51' failed
make[1]: *** [_module_/home/admposte/Downloads/linux/driver/rtl8821AU_linux_v4.3.14_13455.20150212_BTCOEX20150128-51] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.4.0-116-generic'
Makefile:1551: recipe for target 'modules' failed
make: *** [modules] Error 2
##################################################
Compile make driver error: 2
Please check error Mesg
##################################################

Le pilote est issu du site du constructeur.

D'avance merci de votre aide.


Modération:
Pour un bon balisage consultez svp, Comment postez vos images tuto ici  les   Balises codes exemple
Donnez un retour complet depuis votre identifiant à votre identifiant, sera plus clair pour vous aider

Dernière modification par NewLinux2018 (Le 20/03/2018, à 12:53)

Hors ligne

#2 Le 01/03/2018, à 13:00

xubu1957

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Bonjour,

Pour ta clé wifi :

Bus 002 Device 009: ID 0bda:0811 Realtek Semiconductor Corp. 

Regarde dans cette discussion > [Résolu]pas de Wifi rtl8812au- echec de compilation - conflit kernel

toutafai a écrit :

Bonjour,

....

a faire pc relié au net via un cable :

sudo apt-get update
sudo apt-get install linux-headers-generic build-essential git
git clone https://github.com/gnab/rtl8812au.git
cd ~/rtl8812au
make
sudo make install
sudo modprobe 8812au

et a chaque fois qu'il y aura une mise a jour du noyau :

cd ~/rtl8812au
make clean
make
sudo make install
sudo modprobe 8812au

> [Résolu] Erreurs compil driver clé Wifi EW-7811UTC

Rajout - [SOLVED] Compiling RTL8821AU Wifi USB adapter failure (Compile make driver error: 2)

Dernière modification par xubu1957 (Le 01/03/2018, à 13:30)


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#3 Le 01/03/2018, à 14:53

NewLinux2018

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Bonjour,

Merci pour ton retour.

Il y a du mieux. smile

Pas de message d'erreur durant la compilation.

De plus lorsque j’insère la clé WIFI, la led de la clé clignote, elle bien vu.

Après reboot du système, je vois bien la liste des SSID WIFI disponible.
Après avoir sélectionné le SSID, j'ai saisi le mot de passe de la clé WIFI, mais rien, pas de connexion sur le SSID.

Je redémarre une nouvelle vois le poste, et dans la liste des SSID plus rien ne s'affiche.
Le curseur de recherche tourne en rond et rien ne s'affiche. sad

Encore une fois merci pour votre aide.

Hors ligne

#4 Le 01/03/2018, à 14:56

xubu1957

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Avec la commande :

sudo modprobe 8812au

il ressort un message d'erreur ?


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#5 Le 01/03/2018, à 15:06

NewLinux2018

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Non pas de message d'erreur

Info suite à la commande

dmesg | tail -50
[ 2645.306784] RTL871X:  power-on :REG_SYS_CLKR 0x09=0x30. REG_CR 0x100=0xea.
[ 2645.306786] RTL871X:  MAC has not been powered on yet.
[ 2645.314160] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2645.378406] RTL871X: FirmwareDownload8812 fw source from Header
[ 2645.378412] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2645.378415] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2645.417907] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00060605
[ 2645.419777] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2645.447529] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 2645.447534] RTL871X: FWDL success. write_fw:1, 68ms
[ 2645.447536] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2645.472031] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2645.659030] RTL871X: HW_VAR_BASIC_RATE: 0x15f -> 0x15f -> 0x15f
[ 2645.672031] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 2645.672673] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2645.758154] RTL871X: pDM_Odm TxPowerTrackControl = 1
[ 2645.759026] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2645.760152] RTL871X: MAC Address from REG_MACID = e8:4e:06:35:93:8d
[ 2645.760154] RTL871X: rtl8812au_hal_init in 452ms
[ 2645.760797] RTL871X: hw_var_set_opmode()-5008 mode = 2
[ 2645.761290] RTL871X: <===  rtw_ips_pwr_up.............. in 456ms
[ 2645.761292] RTL871X: nolinked power save leave
[ 2645.761403] RTL871X: ==> ips_leave.....LED(0x01828282)...
[ 2647.159156] RTL871X: HW_VAR_BASIC_RATE: 0x150 -> 0x150 -> 0x150
[ 2647.764277] RTL871X: IsBtDisabled=1, IsBtControlLps=0
[ 2649.755655] RTL871X: HW_VAR_BASIC_RATE: 0x15f -> 0x15f -> 0x15f
[ 2649.768234] RTL871X: IsBtDisabled=1, IsBtControlLps=0
[ 2649.769277] RTL871X: survey done event(0) band:0 for enxe84e0635938d
[ 2649.772780] RTL871X: rtw_indicate_scan_done(enxe84e0635938d)
[ 2649.776243] RTL871X: IsBtDisabled=1, IsBtControlLps=0
[ 2650.108909] RTL871X: ==>rtw_ps_processor .fw_state(8)
[ 2650.108914] RTL871X: ==>ips_enter cnts:5
[ 2650.108916] RTL871X: nolinked power save enter
[ 2650.108918] RTL871X: ===> rtw_ips_pwr_down...................
[ 2650.108920] RTL871X: ====> rtw_ips_dev_unload...
[ 2650.119946] RTL871X: usb_read_port_cancel
[ 2650.120148] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) 
[ 2650.120397] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) 
[ 2650.120645] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) 
[ 2650.120896] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) 
[ 2650.121146] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) 
[ 2650.121396] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) 
[ 2650.121646] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) 
[ 2650.121898] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) 
[ 2650.121902] RTL871X: usb_write_port_cancel 
[ 2650.121915] RTL871X: ==> rtl8812au_hal_deinit 
[ 2650.122924] RTL871X:  hal_poweroff_8812au
[ 2650.126899] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2650.129650] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2650.130149] RTL871X: <=== rtw_ips_pwr_down..................... in 20ms

Dernière modification par NewLinux2018 (Le 01/03/2018, à 15:20)

Hors ligne

#6 Le 01/03/2018, à 15:07

xubu1957

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Pour ajouter toi-même les balises code à ton précédent message…   Merci wink

  • Cliquer sur  le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message

1485703524.png

_ _ _

Il faut donner, en se servant du : Retour utilisable de commande,  ces informations : Configuration wifi ou un wificheck

Nota : un fichier wificheck.log est créé dans votre répertoire personnel, collez l'intégralité de son contenu dans votre discussion.

Dernière modification par xubu1957 (Le 01/03/2018, à 15:32)


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#7 Le 01/03/2018, à 16:12

NewLinux2018

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

SI je comprend bien tu veux le résultat de chacune des commandes qu'il y a dans le lien Configuration WIFI

Donc voici le résultat pour chacune des commandes

admposte@FRA-PST-Ubuntun:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.4 LTS"
admposte@FRA-PST-Ubuntun:~$ lsusb
Bus 002 Device 009: ID 0bda:0811 Realtek Semiconductor Corp. 
Bus 002 Device 006: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 005: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 002 Device 004: ID 413c:2107 Dell Computer Corp. 
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
admposte@FRA-PST-Ubuntun:~$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
00:1f.0 ISA bridge: Intel Corporation Q65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
admposte@FRA-PST-Ubuntun:~$ lspci -k -nn | grep -A 3 -i net
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
	Subsystem: Dell 82579LM Gigabit Network Connection [1028:047e]
	Kernel driver in use: e1000e
	Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04)
admposte@FRA-PST-Ubuntun:~$ lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
	Subsystem: Dell 2nd Generation Core Processor Family DRAM Controller
	Kernel driver in use: snb_uncore
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
	DeviceName:  Onboard IGD
	Subsystem: Dell 2nd Generation Core Processor Family Integrated Graphics Controller
	Kernel driver in use: i915
	Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
	Subsystem: Dell 6 Series/C200 Series Chipset Family MEI Controller
	Kernel driver in use: mei_me
	Kernel modules: mei_me
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
	Subsystem: Dell 82579LM Gigabit Network Connection
	Kernel driver in use: e1000e
	Kernel modules: e1000e
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
	Subsystem: Dell 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
	Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
	DeviceName:  Onboard Audio
	Subsystem: Dell 6 Series/C200 Series Chipset Family High Definition Audio Controller
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
	Subsystem: Dell 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
	Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
00:1f.0 ISA bridge: Intel Corporation Q65 Express Chipset Family LPC Controller (rev 04)
	Subsystem: Dell Q65 Express Chipset Family LPC Controller
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 04)
	Subsystem: Dell 6 Series/C200 Series Chipset Family SATA AHCI Controller
	Kernel driver in use: ahci
	Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
	Subsystem: Dell 6 Series/C200 Series Chipset Family SMBus Controller
	Kernel modules: i2c_i801
admposte@FRA-PST-Ubuntun:~$ sudo lshw -C network
  *-network               
       description: Ethernet interface
       product: 82579LM Gigabit Network Connection
       vendor: Intel Corporation
       physical id: 19
       bus info: pci@0000:00:19.0
       logical name: enp0s25
       version: 04
       serial: 18:03:73:47:0d:54
       size: 1Gbit/s
       capacity: 1Gbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.13-4 ip=192.168.3.160 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
       resources: irq:25 memory:e1a00000-e1a1ffff memory:e1a80000-e1a80fff ioport:3080(size=32)
  *-network
       description: Wireless interface
       physical id: 1
       bus info: usb@2:1.7
       logical name: enxe84e0635938d
       serial: e8:4e:06:35:93:8d
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8821au multicast=yes wireless=unassociated
admposte@FRA-PST-Ubuntun:~$ lsmod
Module                  Size  Used by
cfg80211              565248  0
8812au                991232  0
8821au               1912832  0
dcdbas                 16384  0
intel_rapl             20480  0
snd_hda_codec_hdmi     53248  1
snd_hda_codec_realtek    90112  1
snd_hda_codec_generic    77824  1 snd_hda_codec_realtek
snd_hda_intel          40960  6
snd_hda_codec         135168  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_core           77824  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
x86_pkg_temp_thermal    16384  0
intel_powerclamp       16384  0
snd_hwdep              16384  1 snd_hda_codec
coretemp               16384  0
kvm_intel             172032  0
kvm                   548864  1 kvm_intel
snd_pcm               106496  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
input_leds             16384  0
irqbypass              16384  1 kvm
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
ghash_clmulni_intel    16384  0
snd_seq_midi           16384  0
cryptd                 20480  1 ghash_clmulni_intel
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              32768  2 snd_pcm,snd_seq
mei_me                 36864  0
snd                    81920  23 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
mei                    98304  1 mei_me
serio_raw              16384  0
soundcore              16384  1 snd
shpchp                 36864  0
8250_fintek            16384  0
lpc_ich                24576  0
mac_hid                16384  0
parport_pc             32768  1
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,ppdev,parport_pc
autofs4                40960  2
hid_generic            16384  0
usbhid                 49152  0
hid                   122880  2 hid_generic,usbhid
i915                 1232896  6
i2c_algo_bit           16384  1 i915
drm_kms_helper        155648  1 i915
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
drm                   364544  8 i915,drm_kms_helper
psmouse               131072  0
e1000e                241664  0
ahci                   36864  2
libahci                32768  1 ahci
ptp                    20480  1 e1000e
pps_core               20480  1 ptp
fjes                   28672  0
video                  40960  1 i915
admposte@FRA-PST-Ubuntun:~$ iwconfig
lo        no wireless extensions.

enp0s25   no wireless extensions.

enxe84e0635938d  unassociated  Nickname:"<WIFI@REALTEK>"
          Mode:Managed  Frequency=2.412 GHz  Access Point: Not-Associated   
          Sensitivity:0/0  
          Retry:off   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
admposte@FRA-PST-Ubuntun:~$ ifconfig
enp0s25   Link encap:Ethernet  HWaddr 18:03:73:47:0d:54  
          inet addr:192.168.3.160  Bcast:192.168.3.255  Mask:255.255.255.0
          inet6 addr: fe80::3174:7d7c:59ec:4ef3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:24566 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5201 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:11926260 (11.9 MB)  TX bytes:1040501 (1.0 MB)
          Interrupt:20 Memory:e1a00000-e1a20000 

enxe84e0635938d Link encap:Ethernet  HWaddr e8:4e:06:35:93:8d  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:255707 errors:0 dropped:0 overruns:0 frame:0
          TX packets:255707 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1 
          RX bytes:197196901 (197.1 MB)  TX bytes:197196901 (197.1 MB)
admposte@FRA-PST-Ubuntun:~$ sudo iwlist scan
lo        Interface doesn't support scanning.

enp0s25   Interface doesn't support scanning.

enxe84e0635938d  No scan results
admposte@FRA-PST-Ubuntun:~$ uname -r -m
4.4.0-116-generic x86_64
admposte@FRA-PST-Ubuntun:~$ cat /ect/network/interfaces
cat: /ect/network/interfaces: No such file or directory
admposte@FRA-PST-Ubuntun:~$ cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
admposte@FRA-PST-Ubuntun:~$ nm-tool
No command 'nm-tool' found, did you mean:
 Command 'dm-tool' from package 'lightdm' (main)
nm-tool: command not found
admposte@FRA-PST-Ubuntun:~$ sudo rfkill list
admposte@FRA-PST-Ubuntun:~$ nmcli connection show
NAME                UUID                                  TYPE             DEVICE  
Wired connection 1  e71d92a3-84c8-336a-ac15-a78296c9c47e  802-3-ethernet   enp0s25 
MALT_BORNE          72f766bb-8a47-4ec9-a28c-346d6c2b1887  802-11-wireless  --      
MALT_BYOD           76ca4fcb-1590-4226-b2e7-6cd0affd93ef  802-11-wireless  --  

Hors ligne

#8 Le 01/03/2018, à 16:19

NewLinux2018

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Contenu du fichier wificheck.log


>>    cat /etc/lsb-release 

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.4 LTS"

>>    lsusb 

Bus 002 Device 010: ID 0bda:0811 Realtek Semiconductor Corp. 
Bus 002 Device 006: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 005: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 002 Device 004: ID 413c:2107 Dell Computer Corp. 
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

>>    lspci -k -nn | grep -A 3 -i net 

00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
	Subsystem: Dell 82579LM Gigabit Network Connection [1028:047e]
	Kernel driver in use: e1000e
	Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04)

>>    sudo lshw -C network 

  *-network
       description: Ethernet interface
       product: 82579LM Gigabit Network Connection
       vendor: Intel Corporation
       physical id: 19
       bus info: pci@0000:00:19.0
       logical name: enp0s25
       version: 04
       serial: 18:03:73:47:0d:54
       size: 1Gbit/s
       capacity: 1Gbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.13-4 ip=192.168.3.160 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
       resources: irq:25 memory:e1a00000-e1a1ffff memory:e1a80000-e1a80fff ioport:3080(size=32)
  *-network
       description: Wireless interface
       physical id: 1
       bus info: usb@2:1.8
       logical name: enxe84e0635938d
       serial: e8:4e:06:35:93:8d
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8821au multicast=yes wireless=unassociated

>>    lsmod 

Module                  Size  Used by
cfg80211              565248  0
8812au                991232  0
8821au               1912832  0
dcdbas                 16384  0
intel_rapl             20480  0
snd_hda_codec_hdmi     53248  1
snd_hda_codec_realtek    90112  1
snd_hda_codec_generic    77824  1 snd_hda_codec_realtek
snd_hda_intel          40960  6
snd_hda_codec         135168  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_core           77824  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
x86_pkg_temp_thermal    16384  0
intel_powerclamp       16384  0
snd_hwdep              16384  1 snd_hda_codec
coretemp               16384  0
kvm_intel             172032  0
kvm                   548864  1 kvm_intel
snd_pcm               106496  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
input_leds             16384  0
irqbypass              16384  1 kvm
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
ghash_clmulni_intel    16384  0
snd_seq_midi           16384  0
cryptd                 20480  1 ghash_clmulni_intel
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              32768  2 snd_pcm,snd_seq
mei_me                 36864  0
snd                    81920  23 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
mei                    98304  1 mei_me
serio_raw              16384  0
soundcore              16384  1 snd
shpchp                 36864  0
8250_fintek            16384  0
lpc_ich                24576  0
mac_hid                16384  0
parport_pc             32768  1
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,ppdev,parport_pc
autofs4                40960  2
hid_generic            16384  0
usbhid                 49152  0
hid                   122880  2 hid_generic,usbhid
i915                 1232896  6
i2c_algo_bit           16384  1 i915
drm_kms_helper        155648  1 i915
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
drm                   364544  8 i915,drm_kms_helper
psmouse               131072  0
e1000e                241664  0
ahci                   36864  2
libahci                32768  1 ahci
ptp                    20480  1 e1000e
pps_core               20480  1 ptp
fjes                   28672  0
video                  40960  1 i915
>>    iwconfig 

enxe84e0635938d  unassociated  Nickname:"<WIFI@REALTEK>"
          Mode:Managed  Frequency=2.412 GHz  Access Point: Not-Associated   
          Sensitivity:0/0  
          Retry:off   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0


>>    ifconfig -a 

enp0s25   Link encap:Ethernet  HWaddr 18:03:73:47:0d:54  
          inet addr:192.168.3.160  Bcast:192.168.3.255  Mask:255.255.255.0
          inet6 addr: fe80::3174:7d7c:59ec:4ef3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:27295 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5645 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:12679468 (12.6 MB)  TX bytes:1100598 (1.1 MB)
          Interrupt:20 Memory:e1a00000-e1a20000 

enxe84e0635938d Link encap:Ethernet  HWaddr e8:4e:06:35:93:8d  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:1 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:261710 errors:0 dropped:0 overruns:0 frame:0
          TX packets:261710 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1 
          RX bytes:201334495 (201.3 MB)  TX bytes:201334495 (201.3 MB)


>>    sudo iwlist scan 

enxe84e0635938d  No scan results


>>    uname -r -m 

4.4.0-116-generic x86_64

>>    cat /etc/network/interfaces 

# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback

>>    nm-tool 


>>    nmcli dev wifi 

*  SSID  MODE  CHAN  RATE  SIGNAL  BARS  SECURITY 

>>    nmcli connection list (< 15.04) ou nmcli connection show (>= 15.04) 

NAME                UUID                                  TYPE             DEVICE  
Wired connection 1  e71d92a3-84c8-336a-ac15-a78296c9c47e  802-3-ethernet   enp0s25 
MALT_BORNE          72f766bb-8a47-4ec9-a28c-346d6c2b1887  802-11-wireless  --      
MALT_BYOD           76ca4fcb-1590-4226-b2e7-6cd0affd93ef  802-11-wireless  --      

>>    nmcli connection status 


>>    sudo rfkill list

Hors ligne

#9 Le 01/03/2018, à 16:19

xubu1957

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Le 19/08/2007, mr_pouit a écrit :

Lorsque vous avez un souci avec le wi-fi, postez, dans votre premier message,...

Je fais appliquer les instructions. smile

et aussi :

le 31/10/2012, pour le script du wificheck, cracolinux a écrit :

Plusieurs intérêts :

Faciliter la récolte des infos pour les débutants

Faciliter le travail de ceux qui apportent leur aide (questions redondantes, demandes de plus de précision,etc.)

Standardiser l'aspect des fils de discussions pour faciliter les comparaisons et les recherches

Tente :

sudo ifconfig enxe84e0635938d up

Dernière modification par xubu1957 (Le 01/03/2018, à 16:29)


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#10 Le 01/03/2018, à 16:21

NewLinux2018

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Encore merci pour les infos.

Hors ligne

#11 Le 01/03/2018, à 16:40

NewLinux2018

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Pas d'erreur en retour de la commande, la led de la clé WIFI clignote à intervalle régulier.

La liste des accès WIFI est vide avec le message aucun réseau disponible

Hors ligne

#12 Le 01/03/2018, à 16:42

xubu1957

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Tu as plusieurs noyaux d'installés ?

Donne les noyaux présents :

dpkg -l | grep -Ei "linux-(g|h|i|lo|si|t)" | sort -k3 | tr -s " " | cut -d" " -s -f1,2,3 | column -s" " -t

Tu as un chiffrement WPA 2 seul, voir au § 1 >  [Tuto] Pas de Wi-fi ? Eléments importants à vérifier

Dernière modification par xubu1957 (Le 01/03/2018, à 16:44)


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#13 Le 01/03/2018, à 16:54

NewLinux2018

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

L'installation de la distribution est toute fraîche de cette semaine.

Résultat de la commande

admposte@FRA-PST-Ubuntun:~$ dpkg -l | grep -Ei "linux-(g|h|i|lo|si|t)" | sort -k3 | tr -s " " | cut -d" " -s -f1,2,3 | column -s" " -t
ii  linux-generic                        4.4.0.116.122
ii  linux-headers-generic                4.4.0.116.122
ii  linux-image-generic                  4.4.0.116.122
ii  linux-headers-4.4.0-116              4.4.0-116.140
ii  linux-image-extra-4.4.0-116-generic  4.4.0-116.140
ii  linux-headers-4.4.0-116-generic      4.4.0-116.140
ii  linux-image-4.4.0-116-generic        4.4.0-116.140
ii  linux-headers-4.4.0-21               4.4.0-21.37
ii  linux-image-extra-4.4.0-21-generic   4.4.0-21.37
ii  linux-headers-4.4.0-21-generic       4.4.0-21.37
ii  linux-image-4.4.0-21-generic         4.4.0-21.37

Hors ligne

#14 Le 01/03/2018, à 16:58

xubu1957

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

J'ai édité mon message #12, tu as quel chiffrement sur la Box (ou le routeur) ?


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#15 Le 01/03/2018, à 17:05

NewLinux2018

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Résultat de la commande

admposte@FRA-PST-Ubuntun:~$ nmcli dev wifi
*  SSID  MODE  CHAN  RATE  SIGNAL  BARS  SECURITY 

En fait la liste des réseaux est vide pour le WIFI

Hors ligne

#16 Le 01/03/2018, à 17:10

NewLinux2018

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Sinon en chiffrement c'est WEP 2

Hors ligne

#17 Le 01/03/2018, à 17:23

xubu1957

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Fais voir :

dmesg | grep 8812

Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#18 Le 01/03/2018, à 17:26

NewLinux2018

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Le résultat de la commande est longue :


admposte@FRA-PST-Ubuntun:~/rtl8812au$ dmesg | grep 8812
[   18.102697] RTL871X: ReadChipVersion8812A SYS_CFG(0xF0)=0x04411535 
[   18.102818] RTL871X: _ConfigChipOutEP_8812 OutEpQueueSel(0x07), OutEpNumber(4) 
[   18.102819] RTL871X: ====> ReadAdapterInfo8812AU
[   18.247949] RTL871X: hal_ReadMACAddress_8812AU MAC Address from EFUSE = e8:4e:06:35:93:8d
[   18.247953] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found 
[   18.247955] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found 
[   18.247957] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found 
[   18.247959] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found 
[   18.248065] RTL871X: Hal_EfuseParseBTCoexistInfo8812A: BTCoexist=Disable, AntNum=1
[   18.248070] RTL871X: Hal_ReadRemoteWakeup_8812A...bSupportRemoteWakeup(1)
[   18.251564] RTL871X: ReadAdapterInfo8812AU <====
[   18.293819] usbcore: registered new interface driver rtl8812au
[   36.366828] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[   36.431830] RTL871X: FirmwareDownload8812 fw source from Header
[   36.431834] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[   36.431836] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[   36.473202] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[   36.500954] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000602c6
[   36.500958] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[   36.526079] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[   36.722458] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[   36.722957] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[   36.812083] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[   36.813211] RTL871X: rtl8812au_hal_init in 452ms
[   41.615911] RTL871X: rtl8812_set_FwJoinBssReport_cmd mstatus(0)
[   41.635627] RTL871X: ==> rtl8812au_hal_deinit 
[   41.636616] RTL871X:  hal_poweroff_8812au
[   41.640492] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[   41.644121] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[   60.819639] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[   60.886014] RTL871X: FirmwareDownload8812 fw source from Header
[   60.886018] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[   60.886020] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[   60.928515] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[   60.956265] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[   60.956270] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[   60.980645] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[   61.178269] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[   61.178771] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[   61.268016] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[   61.269143] RTL871X: rtl8812au_hal_init in 460ms
[   65.583311] RTL871X: ==> rtl8812au_hal_deinit 
[   65.584298] RTL871X:  hal_poweroff_8812au
[   65.588424] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[   65.591174] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[   93.722516] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[   93.787265] RTL871X: FirmwareDownload8812 fw source from Header
[   93.787269] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[   93.787272] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[   93.830520] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[   93.858313] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 32ms), REG_MCUFWDL:0x000606c6
[   93.858329] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[   93.882533] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[   94.082283] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[   94.082769] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[   94.177145] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[   94.178273] RTL871X: rtl8812au_hal_init in 468ms
[   98.540085] RTL871X: ==> rtl8812au_hal_deinit 
[   98.542553] RTL871X:  hal_poweroff_8812au
[   98.546551] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[   98.549425] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[  136.726968] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[  136.791216] RTL871X: FirmwareDownload8812 fw source from Header
[  136.791221] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[  136.791223] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[  136.834215] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  136.861969] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (194, 28ms), REG_MCUFWDL:0x000606c6
[  136.861975] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[  136.886219] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[  137.083483] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[  137.083971] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[  137.174592] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[  137.175719] RTL871X: rtl8812au_hal_init in 456ms
[  141.544767] RTL871X: ==> rtl8812au_hal_deinit 
[  141.545813] RTL871X:  hal_poweroff_8812au
[  141.549625] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  141.552502] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[  189.724244] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[  189.788527] RTL871X: FirmwareDownload8812 fw source from Header
[  189.788533] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[  189.788544] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[  189.831004] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  189.858748] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[  189.858755] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[  189.882996] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[  190.082497] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[  190.083034] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[  190.171747] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[  190.172875] RTL871X: rtl8812au_hal_init in 456ms
[  194.566302] RTL871X: ==> rtl8812au_hal_deinit 
[  194.567467] RTL871X:  hal_poweroff_8812au
[  194.571280] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  194.574030] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[  252.742239] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[  252.806474] RTL871X: FirmwareDownload8812 fw source from Header
[  252.806479] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[  252.806482] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[  252.848097] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  252.875850] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[  252.875857] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[  252.900099] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[  253.102264] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[  253.102725] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[  253.191600] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[  253.192728] RTL871X: rtl8812au_hal_init in 456ms
[  257.536397] RTL871X: ==> rtl8812au_hal_deinit 
[  257.537381] RTL871X:  hal_poweroff_8812au
[  257.541382] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  257.544133] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[  315.755701] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[  315.819953] RTL871X: FirmwareDownload8812 fw source from Header
[  315.819958] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[  315.819961] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[  315.861448] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  315.889205] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[  315.889211] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[  315.913577] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[  316.114204] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[  316.114702] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[  316.203578] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[  316.204706] RTL871X: rtl8812au_hal_init in 456ms
[  320.551627] RTL871X: ==> rtl8812au_hal_deinit 
[  320.552610] RTL871X:  hal_poweroff_8812au
[  320.556736] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  320.559517] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[  378.714054] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[  378.778304] RTL871X: FirmwareDownload8812 fw source from Header
[  378.778309] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[  378.778312] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[  378.819802] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  378.847558] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (214, 28ms), REG_MCUFWDL:0x000606c6
[  378.847565] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[  378.871804] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[  379.069306] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[  379.069805] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[  379.158680] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[  379.159808] RTL871X: rtl8812au_hal_init in 452ms
[  383.540357] RTL871X: ==> rtl8812au_hal_deinit 
[  383.541463] RTL871X:  hal_poweroff_8812au
[  383.545338] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  383.548089] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[  441.748031] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[  441.812282] RTL871X: FirmwareDownload8812 fw source from Header
[  441.812286] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[  441.812289] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[  441.853782] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  441.881660] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (223, 28ms), REG_MCUFWDL:0x000606c6
[  441.881667] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[  441.905907] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[  442.102409] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[  442.102908] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[  442.191689] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[  442.192791] RTL871X: rtl8812au_hal_init in 452ms
[  446.522205] RTL871X: ==> rtl8812au_hal_deinit 
[  446.523316] RTL871X:  hal_poweroff_8812au
[  446.527191] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  446.529941] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[  504.761510] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[  504.825760] RTL871X: FirmwareDownload8812 fw source from Header
[  504.825765] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[  504.825768] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[  504.867508] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  504.895262] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[  504.895268] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[  504.919510] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[  505.116139] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[  505.116703] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[  505.205511] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[  505.206639] RTL871X: rtl8812au_hal_init in 452ms
[  509.555934] RTL871X: ==> rtl8812au_hal_deinit 
[  509.556919] RTL871X:  hal_poweroff_8812au
[  509.560794] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  509.563544] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[  567.734753] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[  567.798989] RTL871X: FirmwareDownload8812 fw source from Header
[  567.798994] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[  567.798997] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[  567.840485] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  567.868239] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[  567.868244] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[  567.892488] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[  568.092740] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[  568.093266] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[  568.182115] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[  568.183244] RTL871X: rtl8812au_hal_init in 456ms
[  572.546286] RTL871X: ==> rtl8812au_hal_deinit 
[  572.547271] RTL871X:  hal_poweroff_8812au
[  572.551147] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  572.553898] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[  630.755091] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[  630.819715] RTL871X: FirmwareDownload8812 fw source from Header
[  630.819720] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[  630.819723] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[  630.861089] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  630.888842] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[  630.888848] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[  630.913091] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[  631.110717] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[  631.111216] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[  631.199968] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[  631.201096] RTL871X: rtl8812au_hal_init in 452ms
[  635.581535] RTL871X: ==> rtl8812au_hal_deinit 
[  635.582641] RTL871X:  hal_poweroff_8812au
[  635.586537] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  635.589252] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[  693.710068] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[  693.774318] RTL871X: FirmwareDownload8812 fw source from Header
[  693.774324] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[  693.774327] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[  693.815817] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  693.843570] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (210, 32ms), REG_MCUFWDL:0x000606c6
[  693.843576] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[  693.867945] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[  694.066195] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[  694.066721] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[  694.155604] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[  694.156700] RTL871X: rtl8812au_hal_init in 452ms
[  698.529743] RTL871X: ==> rtl8812au_hal_deinit 
[  698.530744] RTL871X:  hal_poweroff_8812au
[  698.534603] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  698.537354] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[  756.756421] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[  756.820673] RTL871X: FirmwareDownload8812 fw source from Header
[  756.820679] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[  756.820681] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[  756.862420] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  756.890173] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (221, 32ms), REG_MCUFWDL:0x000606c6
[  756.890179] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[  756.914424] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[  757.113298] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[  757.113812] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[  757.199946] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[  757.201055] RTL871X: rtl8812au_hal_init in 452ms
[  761.556470] RTL871X: ==> rtl8812au_hal_deinit 
[  761.557454] RTL871X:  hal_poweroff_8812au
[  761.561329] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  761.564082] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[  819.708151] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[  819.772400] RTL871X: FirmwareDownload8812 fw source from Header
[  819.772405] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[  819.772408] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[  819.813775] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  819.841651] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (223, 32ms), REG_MCUFWDL:0x000606c6
[  819.841658] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[  819.865900] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[  820.068152] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[  820.068656] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[  820.157658] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[  820.158782] RTL871X: rtl8812au_hal_init in 456ms
[  824.488614] RTL871X: ==> rtl8812au_hal_deinit 
[  824.489683] RTL871X:  hal_poweroff_8812au
[  824.493558] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  824.496309] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[  882.731878] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[  882.796128] RTL871X: FirmwareDownload8812 fw source from Header
[  882.796133] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[  882.796136] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[  882.838000] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  882.865754] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[  882.865761] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[  882.890003] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[  883.086755] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[  883.087268] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[  883.176177] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[  883.177259] RTL871X: rtl8812au_hal_init in 452ms
[  887.585205] RTL871X: ==> rtl8812au_hal_deinit 
[  887.586176] RTL871X:  hal_poweroff_8812au
[  887.590177] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  887.592915] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[  945.709732] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[  945.773980] RTL871X: FirmwareDownload8812 fw source from Header
[  945.773986] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[  945.773989] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[  945.815478] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  945.843233] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[  945.843241] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[  945.867479] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[  946.064983] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[  946.065610] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[  946.154983] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[  946.156111] RTL871X: rtl8812au_hal_init in 452ms
[  950.497153] RTL871X: ==> rtl8812au_hal_deinit 
[  950.498264] RTL871X:  hal_poweroff_8812au
[  950.502140] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[  950.504891] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1008.756209] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1008.820460] RTL871X: FirmwareDownload8812 fw source from Header
[ 1008.820466] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1008.820469] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1008.862081] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1008.889834] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (221, 28ms), REG_MCUFWDL:0x000606c6
[ 1008.889840] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1008.914209] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1009.111585] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1009.112212] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1009.201084] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1009.202213] RTL871X: rtl8812au_hal_init in 452ms
[ 1013.543132] RTL871X: ==> rtl8812au_hal_deinit 
[ 1013.544140] RTL871X:  hal_poweroff_8812au
[ 1013.547991] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1013.550746] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1065.668894] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1065.733766] RTL871X: FirmwareDownload8812 fw source from Header
[ 1065.733772] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1065.733775] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1065.775770] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1065.803390] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (220, 28ms), REG_MCUFWDL:0x000606c6
[ 1065.803396] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1065.827767] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1066.027393] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1066.028022] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1066.117268] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1066.118395] RTL871X: rtl8812au_hal_init in 460ms
[ 1070.447565] RTL871X: ==> rtl8812au_hal_deinit 
[ 1070.448707] RTL871X:  hal_poweroff_8812au
[ 1070.452550] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1070.455300] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1128.709745] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1128.773992] RTL871X: FirmwareDownload8812 fw source from Header
[ 1128.773996] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1128.773999] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1128.816371] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1128.844246] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 1128.844253] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1128.868495] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1129.065495] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1129.066125] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1129.155120] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1129.156248] RTL871X: rtl8812au_hal_init in 452ms
[ 1133.493057] RTL871X: ==> rtl8812au_hal_deinit 
[ 1133.494244] RTL871X:  hal_poweroff_8812au
[ 1133.498187] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1133.500905] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1191.755496] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1191.819973] RTL871X: FirmwareDownload8812 fw source from Header
[ 1191.819980] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1191.819983] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1191.861471] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1191.889226] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 1191.889234] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1191.913471] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1192.110976] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1192.111511] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1192.200473] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1192.201602] RTL871X: rtl8812au_hal_init in 452ms
[ 1196.549272] RTL871X: ==> rtl8812au_hal_deinit 
[ 1196.550256] RTL871X:  hal_poweroff_8812au
[ 1196.554131] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1196.556882] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1254.725326] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1254.794581] RTL871X: FirmwareDownload8812 fw source from Header
[ 1254.794588] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1254.794591] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1254.836451] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1254.864327] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (223, 32ms), REG_MCUFWDL:0x000606c6
[ 1254.864334] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1254.888575] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1255.087575] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1255.088074] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1255.174576] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1255.175704] RTL871X: rtl8812au_hal_init in 456ms
[ 1259.526373] RTL871X: ==> rtl8812au_hal_deinit 
[ 1259.527384] RTL871X:  hal_poweroff_8812au
[ 1259.531622] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1259.534360] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1317.762928] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1317.827557] RTL871X: FirmwareDownload8812 fw source from Header
[ 1317.827563] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1317.827565] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1317.869332] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1317.897179] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (223, 32ms), REG_MCUFWDL:0x000606c6
[ 1317.897186] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1317.921427] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1318.120806] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1318.121304] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1318.211179] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1318.212308] RTL871X: rtl8812au_hal_init in 456ms
[ 1322.554977] RTL871X: ==> rtl8812au_hal_deinit 
[ 1322.555962] RTL871X:  hal_poweroff_8812au
[ 1322.559962] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1322.562963] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1380.712906] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1380.777282] RTL871X: FirmwareDownload8812 fw source from Header
[ 1380.777287] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1380.777291] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1380.818778] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1380.846534] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 1380.846540] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1380.870797] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1381.068157] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1381.068785] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1381.157563] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1381.158664] RTL871X: rtl8812au_hal_init in 452ms
[ 1385.517706] RTL871X: ==> rtl8812au_hal_deinit 
[ 1385.518688] RTL871X:  hal_poweroff_8812au
[ 1385.522564] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1385.525314] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1443.758884] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1443.823759] RTL871X: FirmwareDownload8812 fw source from Header
[ 1443.823765] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1443.823768] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1443.865633] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1443.893386] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 32ms), REG_MCUFWDL:0x000606c6
[ 1443.893394] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1443.917634] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1444.115885] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1444.116400] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1444.205135] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1444.206263] RTL871X: rtl8812au_hal_init in 456ms
[ 1448.557812] RTL871X: ==> rtl8812au_hal_deinit 
[ 1448.558792] RTL871X:  hal_poweroff_8812au
[ 1448.562667] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1448.565419] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1506.705736] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1506.769985] RTL871X: FirmwareDownload8812 fw source from Header
[ 1506.769991] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1506.769994] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1506.811484] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1506.839239] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 1506.839246] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1506.863486] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1507.063908] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1507.064363] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1507.153113] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1507.154242] RTL871X: rtl8812au_hal_init in 456ms
[ 1511.558417] RTL871X: ==> rtl8812au_hal_deinit 
[ 1511.559397] RTL871X:  hal_poweroff_8812au
[ 1511.563397] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1511.566146] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1569.709464] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1569.773714] RTL871X: FirmwareDownload8812 fw source from Header
[ 1569.773718] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1569.773721] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1569.815238] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1569.843090] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (223, 32ms), REG_MCUFWDL:0x000606c6
[ 1569.843096] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1569.867465] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1570.067467] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1570.067966] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1570.156716] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1570.157844] RTL871X: rtl8812au_hal_init in 456ms
[ 1574.493887] RTL871X: ==> rtl8812au_hal_deinit 
[ 1574.494872] RTL871X:  hal_poweroff_8812au
[ 1574.498748] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1574.501514] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1602.190211] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1602.254712] RTL871X: FirmwareDownload8812 fw source from Header
[ 1602.254717] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1602.254719] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1602.296459] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1602.324213] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 1602.324221] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1602.348591] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1602.546211] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1602.546783] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1602.635471] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1602.636591] RTL871X: rtl8812au_hal_init in 456ms
[ 1606.981010] RTL871X: ==> rtl8812au_hal_deinit 
[ 1606.981993] RTL871X:  hal_poweroff_8812au
[ 1606.985994] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1606.988746] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1665.760823] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1665.825193] RTL871X: FirmwareDownload8812 fw source from Header
[ 1665.825199] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1665.825202] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1665.866566] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1665.894319] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 32ms), REG_MCUFWDL:0x000606c6
[ 1665.894325] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1665.918709] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1666.121570] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1666.122069] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1666.213194] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1666.214449] RTL871X: rtl8812au_hal_init in 464ms
[ 1670.552133] RTL871X: ==> rtl8812au_hal_deinit 
[ 1670.553103] RTL871X:  hal_poweroff_8812au
[ 1670.557227] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1670.559979] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1728.747545] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1728.811796] RTL871X: FirmwareDownload8812 fw source from Header
[ 1728.811800] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1728.811803] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1728.853294] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1728.881072] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 32ms), REG_MCUFWDL:0x000606c6
[ 1728.881087] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1728.905420] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1729.104173] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1729.104707] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1729.193549] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1729.194676] RTL871X: rtl8812au_hal_init in 456ms
[ 1733.579472] RTL871X: ==> rtl8812au_hal_deinit 
[ 1733.580454] RTL871X:  hal_poweroff_8812au
[ 1733.584455] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1733.587206] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1791.744275] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1791.808523] RTL871X: FirmwareDownload8812 fw source from Header
[ 1791.808527] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1791.808530] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1791.849896] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1791.877649] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 1791.877654] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1791.901898] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1792.099025] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1792.099525] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1792.188275] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1792.189406] RTL871X: rtl8812au_hal_init in 452ms
[ 1796.548573] RTL871X: ==> rtl8812au_hal_deinit 
[ 1796.549561] RTL871X:  hal_poweroff_8812au
[ 1796.553557] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1796.556308] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1854.702503] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1854.766750] RTL871X: FirmwareDownload8812 fw source from Header
[ 1854.766754] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1854.766757] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1854.809249] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1854.837002] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (221, 28ms), REG_MCUFWDL:0x000606c6
[ 1854.837008] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1854.861376] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1855.058644] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1855.059128] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1855.147877] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1855.149007] RTL871X: rtl8812au_hal_init in 452ms
[ 1859.496468] RTL871X: ==> rtl8812au_hal_deinit 
[ 1859.497426] RTL871X:  hal_poweroff_8812au
[ 1859.501410] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1859.504161] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1917.754730] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1917.818981] RTL871X: FirmwareDownload8812 fw source from Header
[ 1917.818988] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1917.818991] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1917.860852] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1917.888608] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (221, 28ms), REG_MCUFWDL:0x000606c6
[ 1917.888616] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1917.912982] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1918.112856] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1918.113374] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1918.202231] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1918.203359] RTL871X: rtl8812au_hal_init in 456ms
[ 1922.577531] RTL871X: ==> rtl8812au_hal_deinit 
[ 1922.578515] RTL871X:  hal_poweroff_8812au
[ 1922.582390] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1922.585140] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1980.753083] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1980.817457] RTL871X: FirmwareDownload8812 fw source from Header
[ 1980.817462] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1980.817465] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1980.858956] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1980.886710] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (221, 28ms), REG_MCUFWDL:0x000606c6
[ 1980.886717] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1980.911082] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1981.107835] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 1981.108353] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1981.197209] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1981.198337] RTL871X: rtl8812au_hal_init in 452ms
[ 1985.560682] RTL871X: ==> rtl8812au_hal_deinit 
[ 1985.561616] RTL871X:  hal_poweroff_8812au
[ 1985.565491] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1985.568278] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2043.742810] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2043.807060] RTL871X: FirmwareDownload8812 fw source from Header
[ 2043.807066] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2043.807069] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2043.848559] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2043.876313] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 2043.876320] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2043.900560] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2044.098311] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 2044.098811] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2044.187688] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2044.188816] RTL871X: rtl8812au_hal_init in 456ms
[ 2048.515303] RTL871X: ==> rtl8812au_hal_deinit 
[ 2048.516233] RTL871X:  hal_poweroff_8812au
[ 2048.520094] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2048.522911] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2106.698913] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2106.763163] RTL871X: FirmwareDownload8812 fw source from Header
[ 2106.763168] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2106.763171] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2106.805036] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2106.832790] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 32ms), REG_MCUFWDL:0x000606c6
[ 2106.832797] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2106.857164] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2107.056082] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 2107.056539] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2107.145414] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2107.146543] RTL871X: rtl8812au_hal_init in 456ms
[ 2111.516101] RTL871X: ==> rtl8812au_hal_deinit 
[ 2111.517071] RTL871X:  hal_poweroff_8812au
[ 2111.520946] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2111.523698] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2169.732642] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2169.796890] RTL871X: FirmwareDownload8812 fw source from Header
[ 2169.796895] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2169.796898] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2169.838406] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2169.866146] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (221, 32ms), REG_MCUFWDL:0x000606c6
[ 2169.866152] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2169.890516] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2170.090393] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 2170.090892] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2170.179767] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2170.180896] RTL871X: rtl8812au_hal_init in 456ms
[ 2174.521324] RTL871X: ==> rtl8812au_hal_deinit 
[ 2174.522436] RTL871X:  hal_poweroff_8812au
[ 2174.526378] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2174.529051] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2232.721243] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2232.785619] RTL871X: FirmwareDownload8812 fw source from Header
[ 2232.785625] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2232.785627] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2232.829117] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2232.856871] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 32ms), REG_MCUFWDL:0x000606c6
[ 2232.856878] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2232.881120] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2233.079745] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 2233.080268] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2233.176254] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2233.177377] RTL871X: rtl8812au_hal_init in 464ms
[ 2237.527667] RTL871X: ==> rtl8812au_hal_deinit 
[ 2237.528653] RTL871X:  hal_poweroff_8812au
[ 2237.532545] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2237.535281] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2295.734347] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2295.798613] RTL871X: FirmwareDownload8812 fw source from Header
[ 2295.798619] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2295.798622] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2295.839970] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2295.867723] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (221, 28ms), REG_MCUFWDL:0x000606c6
[ 2295.867729] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2295.892098] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2296.089474] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 2296.090000] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2296.185788] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2296.186853] RTL871X: rtl8812au_hal_init in 460ms
[ 2300.561895] RTL871X: ==> rtl8812au_hal_deinit 
[ 2300.562881] RTL871X:  hal_poweroff_8812au
[ 2300.566756] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2300.569507] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2358.749949] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2358.814200] RTL871X: FirmwareDownload8812 fw source from Header
[ 2358.814206] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2358.814209] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2358.855573] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2358.883328] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 32ms), REG_MCUFWDL:0x000606c6
[ 2358.883335] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2358.907575] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2359.106452] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 2359.106951] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2359.201701] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2359.202830] RTL871X: rtl8812au_hal_init in 460ms
[ 2363.624002] RTL871X: ==> rtl8812au_hal_deinit 
[ 2363.624984] RTL871X:  hal_poweroff_8812au
[ 2363.628859] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2363.631610] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2421.714302] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2421.778551] RTL871X: FirmwareDownload8812 fw source from Header
[ 2421.778555] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2421.778558] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2421.820073] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2421.847803] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 2421.847809] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2421.872053] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2422.072806] RTL871X: ==>  _InitAntenna_Selection_8812A ....
[ 2422.073304] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2422.171054] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2422.172313] RTL871X: rtl8812au_hal_init in 468ms
[ 2426.550852] RTL871X: ==> rtl8812au_hal_deinit 
[ 2426.551836] RTL871X:  hal_poweroff_8812au
[ 2426.555837] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2426.558588] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0

Hors ligne

#19 Le 01/03/2018, à 17:40

xubu1957

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Montre :

modinfo 8812au | grep -i version

d'après > ubuntuforums.org


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#20 Le 01/03/2018, à 17:43

NewLinux2018

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

admposte@FRA-PST-Ubuntun:~/rtl8812au$ modinfo 8812au | grep -i version
version:        v4.2.2_7502.20130517
srcversion:     E96B8D9016B150E0F37C9AE
vermagic:       4.4.0-116-generic SMP mod_unload modversions retpoline 
parm:           rtw_chip_version:int

Hors ligne

#21 Le 01/03/2018, à 18:02

xubu1957

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Dans ton message # 1:

v4.3.14_13455.20150212_BTCOEX20150128-51/core/rtw_cmd.o] Error 1

et au #20 :

v4.2.2_7502.20130517

Une version ancienne du pilote wifi, est installée.

(edit=messages regroupés)

_ _ _

En s'inspirant de :

chili555 a écrit :

You STILL have the wrong driver installed. We'll have to struggle a bit to remove it.
Vous avez toujours le mauvais pilote installé. Nous allons devoir lutter un peu pour l'enlever.

cd  ~/Documents/linux/driver/rtl8821AU_linux_v4.3.14_13455.20150212_BTCOEX20150128-51
sudo make uninstall

Il faudrait supprimer le pilote ancien avec sa référence.


_ _ _


Vu la Doc > wifi_chipset_realtek_rtl8812au

Avant de pouvoir essayer :

sudo apt-get update && sudo apt-get install rtl8812au-dkms

Dernière modification par xubu1957 (Le 01/03/2018, à 18:24)


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#22 Le 01/03/2018, à 18:41

NewLinux2018

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

J'ai juste saisie cette commande pour l'instant et voici le résultat

Est-ce que je dois faire aussi les commandes en début de message ?

admposte@FRA-PST-Ubuntun:~$ sudo apt-get update && sudo apt-get install rtl8812au-dkms
[sudo] password for admposte: 
Atteint:1 http://ppa.launchpad.net/noobslab/macbuntu/ubuntu xenial InRelease
Ign:2 http://dl.google.com/linux/chrome/deb stable InRelease              
Atteint:3 http://ppa.launchpad.net/webupd8team/y-ppa-manager/ubuntu xenial InRelease
Atteint:4 http://dl.google.com/linux/chrome/deb stable Release               
Atteint:5 http://es-mirrors.evowise.com/ubuntu xenial InRelease              
Atteint:6 http://es-mirrors.evowise.com/ubuntu xenial-updates InRelease
Atteint:7 http://es-mirrors.evowise.com/ubuntu xenial-backports InRelease
Atteint:8 http://es-mirrors.evowise.com/ubuntu xenial-security InRelease
Lecture des listes de paquets... Fait                          
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
The following additional packages will be installed:
  dkms
Les NOUVEAUX paquets suivants seront installés :
  dkms rtl8812au-dkms
0 mis à jour, 2 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 1 090 ko dans les archives.
Après cette opération, 8 044 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [Y/n] y
Réception de:1 http://es-mirrors.evowise.com/ubuntu xenial-updates/main amd64 dkms all 2.2.0.3-2ubuntu11.5 [66,3 kB]
Réception de:2 http://es-mirrors.evowise.com/ubuntu xenial/universe amd64 rtl8812au-dkms all 4.3.8.12175.20140902+dfsg-0ubuntu2 [1 024 kB]
1 090 ko réceptionnés en 0s (2 266 ko/s)  
Sélection du paquet dkms précédemment désélectionné.
(Lecture de la base de données... 203726 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../dkms_2.2.0.3-2ubuntu11.5_all.deb ...
Dépaquetage de dkms (2.2.0.3-2ubuntu11.5) ...
Sélection du paquet rtl8812au-dkms précédemment désélectionné.
Préparation du dépaquetage de .../rtl8812au-dkms_4.3.8.12175.20140902+dfsg-0ubuntu2_all.deb ...
Dépaquetage de rtl8812au-dkms (4.3.8.12175.20140902+dfsg-0ubuntu2) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.5-1) ...
Paramétrage de dkms (2.2.0.3-2ubuntu11.5) ...
Paramétrage de rtl8812au-dkms (4.3.8.12175.20140902+dfsg-0ubuntu2) ...
Loading new rtl8812au-4.3.8.12175.20140902+dfsg DKMS files...
First Installation: checking all kernels...
Building only for 4.4.0-116-generic
Building initial module for 4.4.0-116-generic
Done.

8812au:
Running module version sanity check.
 - Original module
 - Installation
   - Installing to /lib/modules/4.4.0-116-generic/updates/dkms/

depmod....

DKMS: install completed.

Hors ligne

#23 Le 01/03/2018, à 18:54

NewLinux2018

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Dès les premières commande de saisie la clé était bien vu et je pouvais voir la liste de SSID disponible, et maintenant la clé est toujours vu dans les paramétres mais n'affiche plus de liste de SSID.

Entre j'ai éteint et redémarré le système

Encore merci pour ces efforts

Hors ligne

#24 Le 01/03/2018, à 18:54

xubu1957

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Tu n'as toujours pas de wifi ?


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#25 Le 01/03/2018, à 18:58

NewLinux2018

Re : [Résolu] Clé WIFI EDUP (RTL8811AU)

Non toujours pas malheureusement

Hors ligne