#26 Le 02/05/2018, à 11:04
- malbo
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Je te prie de déconnecter ta clé USB de 16 Go, de refaire un Boot-Info et d'en donner l'URL dans ta réponse.
Hors ligne
#27 Le 02/05/2018, à 11:35
- moko138
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Il y a un disque non-partitionné et formaté en ntfs :
blkid /dev/sdb: LABEL="Documents" UUID="45AB2FEB454943A3" TYPE="ntfs" PTTYPE="dos" parted -lm: /dev/sdb:1000GB:scsi:512:4096:loop:ATA TOSHIBA HDWD110:; # Noter "LOOP" 1:0.00B:1000GB:1000GB:ntfs::; fdisk -l Disk identifier: 0x00000000
En théorie, Linux sait s'en accomoder (pour windows, je ne sais pas).
Mais ce n'est pas recommandé.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#28 Le 02/05/2018, à 12:54
- Skp
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Merci a tous pour vos interventions.
Depuis la modification du fstab comme indiqué par Malbo, j'ai a nouveau des gros problemes pour booter. J'ai du effectuer une dizaine de hard reset pour reussir à lancer une session.
A plusieurs reprises le boot s'est bloqué apres l'ecran du bios, affichant ceci:
Là j'ai reussi a lancer une session, dont voici le Boot info demandé, sans la clé USB
@Moko138: je ne comprends pas quand tu dis que le disque n'est pas partionné, car en fait j'ai des fichiers sur ce disque et j'y accede, donc pour moi il y a une partition dessus que j'ai d'ailleurs fait moi meme a partir de l'utilitaire "Disque"
Hors ligne
#29 Le 02/05/2018, à 13:31
- ??
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Bonjour a vous deux et merci pour vos reponses
@xubu: merci pour l'infos, je ferais ca maintenant !
@diesel: Donc tu me conseilles de réinstaller la 17.10 ou d’attendre la sortie de la 18.04 LTS (prévue pour le 26 avril, je crois) ?
Voici les résultats demandés:
# /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda2 during installation UUID=b115105a-3ed5-46dc-8523-122b04ca0d5f / ext4 errors=remount-ro 0 1 # /boot/efi was on /dev/sda1 during installation UUID=3DE6-0CDC /boot/efi vfat umask=0077 0 1 /swapfile none swap sw 0 0 /dev/disk/by-uuid/45AB2FEB454943A3 /mnt/45AB2FEB454943A3 auto nosuid,nodev,nofail,x-gvfs-show 0 0 /dev/disk/by-uuid/0256533A56532DA3 /mnt/0256533A56532DA3 auto nosuid,nodev,nofail,x-gvfs-show 0 0
Bonjour
Je ne sais que te dire pour tes problèmes
Dans un premier temps, modifies les deux lignes en questions pour qu'elles deviennent
####### /dev/disk/by-uuid/45AB2FEB454943A3 /mnt/45AB2FEB454943A3 auto nosuid,nodev,nofail,x-gvfs-show 0 0
UUID=0256533A56532DA3 /mnt/0256533A56532DA3 defaults,umask=007,uid=1000,gid=46,windows_names,errors=remount-ro 0 0
car cette ligne, personne n'apprécie de ne pas voir sdb1 mais seulement sdb
/dev/sdb: LABEL="DonnM-CM-)es" UUID="45AB2FEB454943A3
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#30 Le 02/05/2018, à 13:40
- ??
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Bonjour
Je te prie de booter avec ton support d'installation
D'y installer smartctl https://doc.ubuntu-fr.org/smartmontools
et de jouer les paragraphes 1 et 3.1 en donnant le résultat pour les trois disques.
Dernière modification par ?? (Le 02/05/2018, à 14:54)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#31 Le 02/05/2018, à 14:47
- malbo
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Ton Boot-Info est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Windows 2000/XP/2003 is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdc1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb: ___________________________________________________________________________
File system: ntfs
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 488,397,167 488,397,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 488,396,799 487,346,176 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 63 1,953,522,143 1,953,522,081 7 NTFS / exFAT / HPFS
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop10 squashfs
/dev/loop11 squashfs
/dev/loop12 squashfs
/dev/loop13 squashfs
/dev/loop14 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/loop8 squashfs
/dev/loop9 squashfs
/dev/sda1 3DE6-0CDC vfat
/dev/sda2 b115105a-3ed5-46dc-8523-122b04ca0d5f ext4
/dev/sdb 45AB2FEB454943A3 ntfs Documents
/dev/sdc1 0256533A56532DA3 ntfs Photo
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 May 2 12:46 ata-HL-DT-ST_DVDRAM_GSA-H60N_K1281U43457 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 2 12:47 ata-ST31000340SV_5QJ13HJY -> ../../sdc
lrwxrwxrwx 1 root root 10 May 2 12:47 ata-ST31000340SV_5QJ13HJY-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 May 2 12:47 ata-Samsung_SSD_860_EVO_250GB_S3YJNB0K278527M -> ../../sda
lrwxrwxrwx 1 root root 10 May 2 12:47 ata-Samsung_SSD_860_EVO_250GB_S3YJNB0K278527M-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 2 12:47 ata-Samsung_SSD_860_EVO_250GB_S3YJNB0K278527M-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 May 2 12:47 ata-TOSHIBA_HDWD110_X7M2S63FS -> ../../sdb
lrwxrwxrwx 1 root root 9 May 2 12:46 usb-Generic_Flash_HS-CF_26020128B005-0:0 -> ../../sde
lrwxrwxrwx 1 root root 9 May 2 12:46 usb-Generic_Flash_HS-COMBO_26020128B005-0:1 -> ../../sdf
lrwxrwxrwx 1 root root 9 May 2 12:46 usb-Generic_STORAGE_DEVICE_000000000903-0:0 -> ../../sdd
lrwxrwxrwx 1 root root 9 May 2 12:47 wwn-0x5000039fd3cf5753 -> ../../sdb
lrwxrwxrwx 1 root root 9 May 2 12:47 wwn-0x5000c500139a60cb -> ../../sdc
lrwxrwxrwx 1 root root 10 May 2 12:47 wwn-0x5000c500139a60cb-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 May 2 12:47 wwn-0x5002538e40170479 -> ../../sda
lrwxrwxrwx 1 root root 10 May 2 12:47 wwn-0x5002538e40170479-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 2 12:47 wwn-0x5002538e40170479-part2 -> ../../sda2
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
========================== sda1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid b115105a-3ed5-46dc-8523-122b04ca0d5f root hd0,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b115105a-3ed5-46dc-8523-122b04ca0d5f
else
search --no-floppy --fs-uuid --set=root b115105a-3ed5-46dc-8523-122b04ca0d5f
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b115105a-3ed5-46dc-8523-122b04ca0d5f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b115105a-3ed5-46dc-8523-122b04ca0d5f
else
search --no-floppy --fs-uuid --set=root b115105a-3ed5-46dc-8523-122b04ca0d5f
fi
linux /boot/vmlinuz-4.15.0-20-generic root=UUID=b115105a-3ed5-46dc-8523-122b04ca0d5f ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.15.0-20-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-b115105a-3ed5-46dc-8523-122b04ca0d5f' {
menuentry 'Ubuntu, avec Linux 4.15.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-advanced-b115105a-3ed5-46dc-8523-122b04ca0d5f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b115105a-3ed5-46dc-8523-122b04ca0d5f
else
search --no-floppy --fs-uuid --set=root b115105a-3ed5-46dc-8523-122b04ca0d5f
fi
echo 'Chargement de Linux 4.15.0-20-generic…'
linux /boot/vmlinuz-4.15.0-20-generic root=UUID=b115105a-3ed5-46dc-8523-122b04ca0d5f ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-20-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-recovery-b115105a-3ed5-46dc-8523-122b04ca0d5f' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b115105a-3ed5-46dc-8523-122b04ca0d5f
else
search --no-floppy --fs-uuid --set=root b115105a-3ed5-46dc-8523-122b04ca0d5f
fi
echo 'Chargement de Linux 4.15.0-20-generic…'
linux /boot/vmlinuz-4.15.0-20-generic root=UUID=b115105a-3ed5-46dc-8523-122b04ca0d5f ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-20-generic
}
menuentry 'Ubuntu, avec Linux 4.15.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-15-generic-advanced-b115105a-3ed5-46dc-8523-122b04ca0d5f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b115105a-3ed5-46dc-8523-122b04ca0d5f
else
search --no-floppy --fs-uuid --set=root b115105a-3ed5-46dc-8523-122b04ca0d5f
fi
echo 'Chargement de Linux 4.15.0-15-generic…'
linux /boot/vmlinuz-4.15.0-15-generic.efi.signed root=UUID=b115105a-3ed5-46dc-8523-122b04ca0d5f ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-15-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-15-generic-recovery-b115105a-3ed5-46dc-8523-122b04ca0d5f' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b115105a-3ed5-46dc-8523-122b04ca0d5f
else
search --no-floppy --fs-uuid --set=root b115105a-3ed5-46dc-8523-122b04ca0d5f
fi
echo 'Chargement de Linux 4.15.0-15-generic…'
linux /boot/vmlinuz-4.15.0-15-generic.efi.signed root=UUID=b115105a-3ed5-46dc-8523-122b04ca0d5f ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-15-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
/etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=b115105a-3ed5-46dc-8523-122b04ca0d5f / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=3DE6-0CDC /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
#/dev/disk/by-uuid/0256533A56532DA3 /mnt/0256533A56532DA3 auto nosuid,nodev,nofail,x-gvfs-show 0 0
#/dev/disk/by-uuid/45AB2FEB454943A3 /mnt/45AB2FEB454943A3 auto nosuid,nodev,nofail,x-gvfs-show 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
148.650314331 = 159.612059648 boot/grub/grub.cfg 3
43.828990936 = 47.061020672 boot/vmlinuz-4.15.0-15-generic 1
44.110240936 = 47.363010560 boot/vmlinuz-4.15.0-15-generic.efi.signed 1
10.680530548 = 11.468132352 boot/vmlinuz-4.15.0-20-generic 2
10.680530548 = 11.468132352 vmlinuz 2
11.004108429 = 11.815571456 boot/initrd.img-4.15.0-15-generic 4
11.016597748 = 11.828981760 boot/initrd.img-4.15.0-20-generic 3
11.016597748 = 11.828981760 initrd.img 3
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdb
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 00 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 af 6d 70 74 00 00 00 00 |.........mpt....|
00000030 04 00 00 00 00 00 00 00 da 06 47 07 00 00 00 00 |..........G.....|
00000040 f6 00 00 00 01 00 00 00 a3 43 49 45 eb 2f ab 45 |.........CIE./.E|
00000050 00 00 00 00 0e 1f be 71 7c ac 22 c0 74 0b 56 b4 |.......q|.".t.V.|
00000060 0e bb 07 00 cd 10 5e eb f0 32 e4 cd 16 cd 19 eb |......^..2......|
00000070 fe 54 68 69 73 20 69 73 20 6e 6f 74 20 61 20 62 |.This is not a b|
00000080 6f 6f 74 61 62 6c 65 20 64 69 73 6b 2e 20 50 6c |ootable disk. Pl|
00000090 65 61 73 65 20 69 6e 73 65 72 74 20 61 20 62 6f |ease insert a bo|
000000a0 6f 74 61 62 6c 65 20 66 6c 6f 70 70 79 20 61 6e |otable floppy an|
000000b0 64 0d 0a 70 72 65 73 73 20 61 6e 79 20 6b 65 79 |d..press any key|
000000c0 20 74 6f 20 74 72 79 20 61 67 61 69 6e 20 2e 2e | to try again ..|
000000d0 2e 20 0d 0a 00 00 00 00 00 00 00 00 00 00 00 00 |. ..............|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdd sde sdf
ADDITIONAL INFORMATION :
=================== log of boot-info 20180502_1247 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=b115105a-3ed5-46dc-8523-122b04ca0d5f ro quiet splash
sdb may have broken partition table.
sdb may have broken partition table.
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 18.04 LTS CurrentSession:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: UUID="3DE6-0CDC" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="89e4024c-1382-4cca-9ef6-151c29bcfc76"
/dev/sda2: UUID="b115105a-3ed5-46dc-8523-122b04ca0d5f" TYPE="ext4" PARTUUID="7e6e2097-c9f3-45f0-80a4-af5a0d322b3d"
/dev/sdb: LABEL="Documents" UUID="45AB2FEB454943A3" TYPE="ntfs" PTTYPE="dos"
/dev/sdc1: LABEL="Photo" UUID="0256533A56532DA3" TYPE="ntfs" PARTUUID="e06de06c-01"
/dev/loop8: TYPE="squashfs"
/dev/loop9: TYPE="squashfs"
/dev/loop10: TYPE="squashfs"
/dev/loop11: TYPE="squashfs"
/dev/loop12: TYPE="squashfs"
/dev/loop13: TYPE="squashfs"
/dev/loop14: TYPE="squashfs"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 4 07:12 grub.d
total 80
-rwxr-xr-x 1 root root 9783 mars 4 14:11 00_header
-rwxr-xr-x 1 root root 6258 mars 4 14:11 05_debian_theme
-rwxr-xr-x 1 root root 12693 mars 4 14:11 10_linux
-rwxr-xr-x 1 root root 11298 mars 4 14:11 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars 4 14:11 30_os-prober
-rwxr-xr-x 1 root root 1418 mars 4 14:11 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mars 4 14:11 40_custom
-rwxr-xr-x 1 root root 216 mars 4 14:11 41_custom
-rw-r--r-- 1 root root 483 mars 4 14:11 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=3DE6-0CDC (sda1)
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
/usr/share/boot-sav/bs-cmd_terminal.sh: ligne 179: avertissement : command substitution: ignored null byte in input
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 1 seconds
BootOrder: 0000,0001,0002
Boot0000* ubuntu HD(1,GPT,89e4024c-1382-4cca-9ef6-151c29bcfc76,0x800,0x100000)/File(EFIUBUNTUSHIMX64.EFI)
Boot0001* Hard Drive BBS(HD,,0x0)/VenHw(5ce8128b-2cec-40f0-8372-80640e3dc858,0200)..GO..NO..........S.a.m.s.u.n.g. .S.S.D. .8.6.0. .E.V.O. .2.5.0.G.B....................,.@.r.d.=.X..........A.................................>..Gd-.;.A..MQ..L.3.S.J.Y.B.N.K.0.7.2.5.8.7.2. .M. . . . ........BO..NO..........T.O.S.H.I.B.A. .H.D.W.D.1.1.0....................,.@.r.d.=.X..........A.................................>..Gd-.;.A..MQ..L. . . . . . . . . . .X. .M.7.S.2.3.6.S.F........BO..NO..........S.T.3.1.0.0.0.3.4.0.S.V....................,.@.r.d.=.X..........A.................................>..Gd-.;.A..MQ..L. . . . . . . . . . . . .Q.5.1.J.H.3.Y.J........BO
Boot0002* CD/DVD Drive BBS(CDROM,,0x0)/VenHw(5ce8128b-2cec-40f0-8372-80640e3dc858,0300)..GO..NO..........H.L.-.D.T.-.S.T. .D.V.D.R.A.M._.G.S.A.-.H.6.0.N....................,.@.r.d.=.X..........A.................................>..Gd-.;.A..MQ..L.1.K.8.2.U.1.3.4.5.4. .7. . . . . . . . ........BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /boot/efi.
sdc1 : sdc, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdc1.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdc : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, no-os, 63 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:250GB:scsi:512:512:gpt:ATA Samsung SSD 860:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:250GB:250GB:ext4::;
BYT;
/dev/sdb:1000GB:scsi:512:4096:loop:ATA TOSHIBA HDWD110:;
1:0.00B:1000GB:1000GB:ntfs::;
BYT;
/dev/sdc:1000GB:scsi:512:512:msdos:ATA ST31000340SV:;
1:32.3kB:1000GB:1000GB:ntfs::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 162,1M
loop1 loop squashfs 140M
loop2 loop squashfs 86,6M
loop3 loop squashfs 1,6M
loop4 loop squashfs 2,3M
loop5 loop squashfs 13M
loop6 loop squashfs 12,2M
loop7 loop squashfs 21M
loop8 loop squashfs 164,3M
loop9 loop squashfs 86,5M
loop10 loop squashfs 3,3M
loop11 loop squashfs 3,7M
loop12 loop squashfs 140M
loop13 loop squashfs 82M
loop14 loop squashfs 21,6M
sda disk 232,9G
sda1 part vfat 512M
sda2 part ext4 232,4G
sdb disk ntfs 931,5G Documents
sdc disk 931,5G
sdc1 part ntfs 931,5G Photo
sr0 rom 1024M
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /snap/spotify/13
loop1 1 1 0 /snap/gnome-3-26-1604/59
loop2 1 1 0 /snap/core/4486
loop3 1 1 0 /snap/gnome-calculator/154
loop4 1 1 0 /snap/gnome-calculator/167
loop5 1 1 0 /snap/gnome-characters/86
loop6 1 1 0 /snap/gnome-characters/69
loop7 1 1 0 /snap/gnome-logs/25
loop8 1 1 0 /snap/bayam/31
loop9 1 1 0 /snap/core/4407
loop10 1 1 0 /snap/gnome-system-monitor/36
loop11 1 1 0 /snap/gnome-system-monitor/39
loop12 1 1 0 /snap/gnome-3-26-1604/62
loop13 1 1 0 /snap/core/4327
loop14 1 1 0 /snap/gnome-logs/31
sda 0 0 0 running
sda1 0 0 0 /boot/efi
sda2 0 0 0 /
sdb 1 0 0 running
sdc 1 0 0 running
sdc1 1 0 0 /mnt/boot-sav/sdc1
sr0 1 0 1 running
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=3896484k,nr_inodes=974121,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=791772k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=32,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=503)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/var/lib/snapd/snaps/spotify_13.snap on /snap/spotify/13 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_59.snap on /snap/gnome-3-26-1604/59 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_154.snap on /snap/gnome-calculator/154 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_4486.snap on /snap/core/4486 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_167.snap on /snap/gnome-calculator/167 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_86.snap on /snap/gnome-characters/86 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_69.snap on /snap/gnome-characters/69 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_25.snap on /snap/gnome-logs/25 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/bayam_31.snap on /snap/bayam/31 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_4407.snap on /snap/core/4407 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_36.snap on /snap/gnome-system-monitor/36 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_39.snap on /snap/gnome-system-monitor/39 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_62.snap on /snap/gnome-3-26-1604/62 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_4327.snap on /snap/core/4327 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_31.snap on /snap/gnome-logs/31 type squashfs (ro,nodev,relatime,x-gdu.hide)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=791768k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sdc1 on /mnt/boot-sav/sdc1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sde (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdf (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse gpiochip0 hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kfd kmsg lightnvm log lp0 mapper mcelog mem memory_bandwidth mqueue net network_latency network_throughput null parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sdb sdc sdc1 sdd sde sdf sg0 sg1 sg2 sg3 sg4 sg5 sg6 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 00 04 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 dc 0c e6 3d 4e 4f 20 4e 41 4d 45 20 20 |..)...=NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdc1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 10 00 3f 00 00 00 |........?...?...|
00000020 00 00 00 00 80 00 80 00 a0 61 70 74 00 00 00 00 |.........apt....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 a3 2d 53 56 3a 53 56 02 |.........-SV:SV.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.8G 0 3.8G 0% /dev
tmpfs tmpfs 774M 1.8M 772M 1% /run
/dev/sda2 ext4 228G 19G 198G 9% /
tmpfs tmpfs 3.8G 59M 3.8G 2% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.8G 0 3.8G 0% /sys/fs/cgroup
/dev/sda1 vfat 511M 4.7M 507M 1% /boot/efi
/dev/loop0 squashfs 163M 163M 0 100% /snap/spotify/13
/dev/loop1 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/59
/dev/loop3 squashfs 1.7M 1.7M 0 100% /snap/gnome-calculator/154
/dev/loop2 squashfs 87M 87M 0 100% /snap/core/4486
/dev/loop4 squashfs 2.4M 2.4M 0 100% /snap/gnome-calculator/167
/dev/loop5 squashfs 13M 13M 0 100% /snap/gnome-characters/86
/dev/loop6 squashfs 13M 13M 0 100% /snap/gnome-characters/69
/dev/loop7 squashfs 21M 21M 0 100% /snap/gnome-logs/25
/dev/loop8 squashfs 165M 165M 0 100% /snap/bayam/31
/dev/loop9 squashfs 87M 87M 0 100% /snap/core/4407
/dev/loop10 squashfs 3.4M 3.4M 0 100% /snap/gnome-system-monitor/36
/dev/loop11 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/39
/dev/loop12 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/62
/dev/loop13 squashfs 83M 83M 0 100% /snap/core/4327
/dev/loop14 squashfs 22M 22M 0 100% /snap/gnome-logs/31
tmpfs tmpfs 774M 40K 774M 1% /run/user/1000
/dev/sdc1 fuseblk 932G 917G 15G 99% /mnt/boot-sav/sdc1
=================== fdisk -l:
Disk /dev/loop0: 162.1 MiB, 169943040 bytes, 331920 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 140 MiB, 146841600 bytes, 286800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 86.6 MiB, 90759168 bytes, 177264 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 1.6 MiB, 1691648 bytes, 3304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 2.3 MiB, 2428928 bytes, 4744 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 13 MiB, 13594624 bytes, 26552 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 12.2 MiB, 12804096 bytes, 25008 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 21 MiB, 22003712 bytes, 42976 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: E0E6C731-8969-48BA-A1CB-73316A051F80
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 488396799 487346176 232.4G Linux filesystem
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xe06de06c
Device Boot Start End Sectors Size Id Type
/dev/sdc1 63 1953522143 1953522081 931.5G 7 HPFS/NTFS/exFAT
Disk /dev/loop8: 164.3 MiB, 172306432 bytes, 336536 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop9: 86.5 MiB, 90726400 bytes, 177200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop10: 3.3 MiB, 3411968 bytes, 6664 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop11: 3.7 MiB, 3813376 bytes, 7448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop12: 140 MiB, 146841600 bytes, 286800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop13: 82 MiB, 86011904 bytes, 167992 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop14: 21.6 MiB, 22609920 bytes, 44160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !
=================== User settings
The settings chosen by the user will not act on the boot.
On voit que tes deux lignes du fstab ont bien été commentées. J'ai vraiment du mal à imaginer pourquoi la suppression commenter les deux lignes pourries de ton fstab entraîne des difficultés à booter.
Pourrais-tu déconnecter physiquement le disque sdb (Toshiba HDWD110 de 1 To) et refaire des essais de démarrage pour vérifier si ça supprime les pb de démarrage ?
Si ça ne change rien, laisse sdb déconnecté et déconnecte physiquement le disque sdc (Seagate ST31000340SV de 1 To) et refais les essais de démarrage. Si les pb de démarrage sont toujours là alors que les deux disques durs sont enlevés, je donne ma langue aux chiens.
Dernière modification par malbo (Le 02/05/2018, à 14:49)
Hors ligne
#32 Le 02/05/2018, à 15:12
- moko138
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
je ne comprends pas quand tu dis que le disque n'est pas partionné
Imagine un livre ordinaire :
1) il commence par quelques pages de garde (blanches),
2) suivies d'une table des matières,
3) Ensuite seulement vient le corps du texte, éventuellement divisé en plusieurs chapitres.
Grosso modo, un disque partitionné est structuré de même
(les chapitres avec leur corps de texte étant les partitions avec leurs données).
- -
Mais on pourrait imaginer d'écrire dès la première page, comme sur un quotidien.
C'est le cas de ton TOSHIBA HDWD110.
Oui, il y a des données ; non, il n'a pas de partition.
Et c'est vu pareillement par plusieurs outils dans le boot-info.
En voici un 4ème :
=== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdb
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 00 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 af 6d 70 74 00 00 00 00 |.........mpt....|
00000030 04 00 00 00 00 00 00 00 da 06 47 07 00 00 00 00 |..........G.....|
00000040 f6 00 00 00 01 00 00 00 a3 43 49 45 eb 2f ab 45 |.........CIE./.E|
00000050 00 00 00 00 0e 1f be 71 7c ac 22 c0 74 0b 56 b4 |.......q|.".t.V.|
00000060 0e bb 07 00 cd 10 5e eb f0 32 e4 cd 16 cd 19 eb |......^..2......|
00000070 fe 54 68 69 73 20 69 73 20 6e 6f 74 20 61 20 62 |.This is not a b|
00000080 6f 6f 74 61 62 6c 65 20 64 69 73 6b 2e 20 50 6c |ootable disk. Pl|
00000090 65 61 73 65 20 69 6e 73 65 72 74 20 61 20 62 6f |ease insert a bo|
000000a0 6f 74 61 62 6c 65 20 66 6c 6f 70 70 79 20 61 6e |otable floppy an|
000000b0 64 0d 0a 70 72 65 73 73 20 61 6e 79 20 6b 65 79 |d..press any key|
000000c0 20 74 6f 20 74 72 79 20 61 67 61 69 6e 20 2e 2e | to try again ..|
000000d0 2e 20 0d 0a 00 00 00 00 00 00 00 00 00 00 00 00 |. ..............|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
les 1ers octets du disque sdb indiquent déjà "NTFS", alors qu'aucune table des partitions n'a été spécifiée.
P.S. : fais ce que te conseille malbo.
Dernière modification par moko138 (Le 02/05/2018, à 15:13)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#33 Le 02/05/2018, à 15:18
- moko138
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Je ne peux pas pour l'instant télécharger ton énorme photo (4,66 Mo). Mais sur la miniature je distingue des problèmes ACPI et IOMMU.
Ajout :
puis
Couldn't get UEFI db list
Dernière modification par moko138 (Le 02/05/2018, à 15:23)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#34 Le 03/05/2018, à 19:05
- Skp
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Bonjour Malbo et Molko,
Merci pour vos messages. Désolé pour mon absence de ces dernières 24h, je n’étais pas disponible.
J'ai déconnecté le DD Toshiba, et depuis 6 redémarrage sans aucun incident. On tient le bon bout !!
Du coup j'ai essayé dans l'utilitaire disque de demander le montage au demarrage du DD Seagate, et là , à nouveau, mon ordi qui ne boot plus.
Avant que vous me le demandiez, voici le Boot-info sans le DD Toshiba: ici
A bientot
Dernière modification par Skp (Le 03/05/2018, à 19:17)
Hors ligne
#35 Le 03/05/2018, à 19:15
- ??
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Bonjour à tous
J'espère donc bientôt avoir une réponse à ma demande ( https://forum.ubuntu-fr.org/viewtopic.p … #p21911591 )puisque tu es revenu.
Dernière modification par ?? (Le 03/05/2018, à 19:15)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#36 Le 03/05/2018, à 19:22
- cqfd93
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Modération
Bonjour,
Ce problème étant plus que probablement lié à celui de l'autre sujet, prière de continuer sur l'autre fil. Ici, on ferme (et je serais même tentée de fusionner les deux…)
− cqfd93 −
En ligne
#37 Le 03/05/2018, à 19:34
- Skp
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Salut ??,
Je n'avais pas vu tes réponses. Merci bcp.
Je n'ai plus le support d'installation (une clé USB que l'on m'avait prêté). Je vais m'en refaire une et je te tiens au courant. Je suis malheureusement assez pris en ce moment, donc je fais ca au plus vite. Merci encore pour l’intérêt porté a mon pb. C'est vraiment sympa
Hors ligne
#38 Le 03/05/2018, à 19:39
- ??
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Si tu as réussis à booter avec tes trois disques, tu peux aussi le faire à partir du ubuntu installé.
J'avais proposé d'utiliser un support d'installation car j'avais noté que booter à partir des disques était très aléatoire.
Ce qui m'a incité à penser à l'état du disque est ta phrase "tout à l'heure en utilisant libre office calc par exemple deux fois de suite."
Dernière modification par ?? (Le 03/05/2018, à 19:39)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#39 Le 03/05/2018, à 19:46
- Skp
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
@??: 3 messages au dessus du me conseilles de modifier le fstab, or dans l'autre discussion que j'avais ouverte on m'avait deja demandé de le modifier.
Voici donc mon nouveau fstab:
m3mo@arioul:~$ cat /etc/fstab
/etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=b115105a-3ed5-46dc-8523-122b04ca0d5f / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=3DE6-0CDC /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
#/dev/disk/by-uuid/0256533A56532DA3 /mnt/0256533A56532DA3 auto nosuid,nodev,nofail,x-gvfs-show 0 0
#/dev/disk/by-uuid/45AB2FEB454943A3 /mnt/45AB2FEB454943A3 auto nosuid,nodev,nofail,x-gvfs-show 0 0
Selon toi, la manip que tu m'avais conseillé est toujours valable ?
Merci d'avance
Dernière modification par Skp (Le 03/05/2018, à 19:47)
Hors ligne
#40 Le 03/05/2018, à 19:49
- ??
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Bonjour
Je te prie de booter avec ton support d'installation
D'y installer smartctl https://doc.ubuntu-fr.org/smartmontools
et de jouer les paragraphes 1 et 3.1 en donnant le résultat pour les trois disques.
C'est cela que je de demande. et dans l'échange d'après ( https://forum.ubuntu-fr.org/viewtopic.p … #p21912337 ) je t'explique pourquoi cela me semble devenir urgent.
Dernière modification par ?? (Le 03/05/2018, à 20:50)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#41 Le 03/05/2018, à 20:05
- cqfd93
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
@Skp :
Puisque tu m'as dit que tu y étais favorable, j'ai fusionné les deux sujets.
− cqfd93 −
En ligne
#42 Le 03/05/2018, à 23:29
- Skp
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Bonsoir
Merci cqfd pour la fusion !
Voici le résultat pour mes trois disques. Encore merci du temps que vous consacrez a mon probleme.
m3mo@arioul:~$ sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de m3mo :
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Samsung SSD 860 EVO 250GB
Serial Number: S3YJNB0K278527M
LU WWN Device Id: 5 002538 e40170479
Firmware Version: RVT01B6Q
User Capacity: 250059350016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: Unknown(0x09fc), ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu May 3 23:24:25 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 217
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 47
177 Wear_Leveling_Count 0x0013 100 100 000 Pre-fail Always - 0
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 072 065 000 Old_age Always - 28
195 Hardware_ECC_Recovered 0x001a 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
235 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 33
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 95385939
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
m3mo@arioul:~$ sudo smartctl -s on -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA HDWD110
Serial Number: X7M2S63FS
LU WWN Device Id: 5 000039 fd3cf5753
Firmware Version: MS2OA8J0
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu May 3 23:25:39 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7361) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 123) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 141 141 054 Pre-fail Offline - 73
3 Spin_Up_Time 0x0007 130 130 024 Pre-fail Always - 176 (Average 177)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 44
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 113 113 020 Pre-fail Offline - 35
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 214
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 44
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 49
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 49
194 Temperature_Celsius 0x0002 187 187 000 Old_age Always - 32 (Min/Max 20/38)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
m3mo@arioul:~$ sudo smartctl -s on -a /dev/sdc
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate SV35.3
Device Model: ST31000340SV
Serial Number: 5QJ13HJY
LU WWN Device Id: 5 000c50 0139a60cb
Firmware Version: SV16
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu May 3 23:26:43 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 642) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 236) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 109 099 006 Pre-fail Always - 22760005
3 Spin_Up_Time 0x0003 088 081 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 095 095 020 Old_age Always - 5355
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 4311683162
9 Power_On_Hours 0x0032 065 065 000 Old_age Always - 31528
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 3
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 377
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 096 096 000 Old_age Always - 4
190 Airflow_Temperature_Cel 0x0022 067 052 045 Old_age Always - 33 (Min/Max 30/33)
194 Temperature_Celsius 0x0022 033 048 000 Old_age Always - 33 (0 10 0 0 0)
195 Hardware_ECC_Recovered 0x001a 055 053 000 Old_age Always - 22760005
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Hors ligne
#43 Le 04/05/2018, à 04:40
- moko138
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Le Toshiba HDWD110, non, je rectifie - merci malbo de ta vigilance ! - :
Le Seagate ST31000340SV a dépassé 31.500 heures et ses secteurs sont en bon état : bravo !
Mais il faiblit et présente des erreurs de lecture, d'origine au moins mécanique.
Dernière modification par moko138 (Le 04/05/2018, à 05:57)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#44 Le 04/05/2018, à 05:25
- malbo
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Le Toshiba HDWD110 a dépassé 31.500 heures et ses secteurs sont en bon état : bravo !
Mais il faiblit et présente des erreurs de lecture, d'origine au moins mécanique.
Non, tu t'es trompé de disque : c'est le Seagate ST31000340SV dont le paramètre "Power_On_Hours" indique 31528
Hors ligne
#45 Le 04/05/2018, à 05:58
- moko138
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Merci ! Rectifié !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#46 Le 04/05/2018, à 09:49
- ??
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Bonjour à vous tous
L'état mécanique des deux disques ne peut pas expliquer le dysfonctionnement logiciel.
Je recommande de faire en sorte de créer des partitions classiques quittes â ne pas utiliser l'utilitaire disque mais l'utilitaire gparted.
Nota, j'ai aussi l'impression que le disque neuf n'est pas merveilleux.
roughput_Performance 0x0005 141 141 054 Pre-fail Offline
3 Spin_Up_Time 0x0007 130 130 024 Pre-fail Always
8 Seek_Time_Performance 0x0005 113 113 020 Pre-fail Offline
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 214
Trois notes de 141 130 et 113 sur une notation à 200 points.
Ce n'est manifestement pas un foudre de guerre.
Dernière modification par ?? (Le 04/05/2018, à 09:55)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#47 Le 04/05/2018, à 11:19
- Skp
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Bonjour à tous.
Merci pour vos interventions.
L'état mécanique des deux disques ne peut pas expliquer le dysfonctionnement logiciel.
Je recommande de faire en sorte de créer des partitions classiques quittes â ne pas utiliser l'utilitaire disque mais l'utilitaire gparted.
Si je comprends bien:
1/ je reformate tout,
2/ je repartitionne avec gparted (je choisi quoi pour une compatibilité avec windows de mes disques NTFS ou FAT ??)
3/ je croise les doigts pour que ca marche mieux !
Nota, j'ai aussi l'impression que le disque neuf n'est pas merveilleux.
Trois notes de 141 130 et 113 sur une notation à 200 points.
Ce n'est manifestement pas un foudre de guerre.
A ton avis, je devrais demander un echange ?
@ Moko & Malbo: effectivement ce n'est pas un disque de premiere jeunesse, je vais voir à le changer.
Bonne journée
Hors ligne
#48 Le 04/05/2018, à 12:16
- ??
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Bonjour
Pour compatibilité avec windows c'est obligatoirement du NTFS.
Il faudra une partition SDB1 Cela va t'obliger à sauvegarder toutes les données du disque avant de reformater
Bien que cela ne soit pas un foudre de guerre, tu devras vivre avec... C'est loin d'être une cause d'échange. Il fonctionne!!!!
Pour l'autre disque. Laisses -le comme cela pour le moment
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always -
9 Power_On_Hours 0x0032 065 065 000 Old_age Always - 31528
195 Hardware_ECC_Recovered 0x001a 055 053 000 Old_age Always -
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
Les compteurs 5 et 197 sont toujours avec une valeur de 0
Pour les autres compteurs
c'est une note de 72 65 et 55 sur 100 donc semblable à l'autre
Tu trouveras dans cette discussion, l'état d'un disque qui a besoin d'être changé
Dernière modification par ?? (Le 04/05/2018, à 12:31)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#49 Le 04/05/2018, à 13:07
- moko138
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
1) Que le plateau du Seagate soit sain ne suffit pas :
7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail 4311683162
Et les temps d'accès vont encore s'allonger.
Or tu as intitulé ton fil «ordi qui freeze (...)», non ?
2) As-tu windows dans cet ordi ?
Si non,
2.1) ne fais pas de partitions internes en ntfs !
2.2) réfléchis déjà à comment assurer la maintenance d'éventuelles partitions ntfs externes.
Dernière modification par moko138 (Le 04/05/2018, à 13:09)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#50 Le 04/05/2018, à 13:16
- ??
Re : nouvelle installation : ordi qui freeze et qui ne veut plus démarrer
Bonjour,
Malheureusement, je viens de me rendre compte que même lorsque je les montais plus tard, mon système redevenait instable et plantait. Lorsque je les démonte je n'ai pas l'impression qu'il y ait de problème...
Merci d'avance !!
Je pense que même si les lectures sont longues voir très longues, voir ne réussissent pas, il ne devrait pas y avoir plantage de l'ordinateur
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne