#1 Le 25/04/2018, à 14:31
- xir01
LUBUNTU 18.04 / Lenteur et freeze
Bonjour à tous,
Je viens d'installer LUBUNTU 18.04 sur mon laptop ASUS Zenbook UX-303L (8Go de ram)
Après mise à jour et l'installation de diverses application, je rencontre des instabilités d'affichage et des lenteurs au lancement des applications. Après quelquesionn jours de fonctionnement normal, mon ordi est tombé dans un état de fonctionnement peu fluide.
Parmi les symptômes :
- quolibet cessent régulièrement et sporadiquement le son
- les fenêtres de mon gestionnaire de dossier (pcmanfm) freeze sporadiquement et régulièrement
- Libreoffice (writer) qui met des plombes à se lancer
....
J'ai eu quelques rapport d'erreur logiciel après affichage desktop au démarrage. J'ai cherché à consulter les détails mais ceux-ci s'affichent et disparaissent aussitôt sans avoir le temps de le lire.
Je remarque que l'on entend beaucoup le HDD graté....
J'ai donc ajouté configurer le recours au SWAP suivant les instructions (https://doc.ubuntu-fr.org/swap) et ajouté un fichier SWAP (https://www.supinfo.com/articles/single … wap-ubuntu)
Mais rien n'y fait. Par où faudrait-il commencer pour enquêter sur ce qui amoindrit le fonctionnement de cet ordi sur lequel était installé Lubuntu 16.04.
Si quelqu'un a des idées par où commencer ....
Merci à tous
Dernière modification par xir01 (Le 25/04/2018, à 14:37)
Hors ligne
#2 Le 25/04/2018, à 14:36
- jbubuntu
Re : LUBUNTU 18.04 / Lenteur et freeze
htop
atop
Hors ligne
#3 Le 25/04/2018, à 14:44
- inbox
Re : LUBUNTU 18.04 / Lenteur et freeze
Salut,
Comme indiqué dans la documentation du forum, installe smartmontools. Ensuite, donne le retour de ce qui est indiqué au paragraphe 3.1 de la doc.
A+
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
En ligne
#4 Le 25/04/2018, à 20:59
- xir01
Re : LUBUNTU 18.04 / Lenteur et freeze
Merci Inbox pour l'attention.
Voilà le retour:
sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de xxxx :
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST2000LM015-2E8174
Serial Number: WDZ3370H
LU WWN Device Id: 5 000c50 0a8b51ed4
Firmware Version: SDM1
User Capacity: 2000398934016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Apr 25 20:56:33 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 328) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 074 064 006 Pre-fail Always - 24050303
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 14
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 072 060 045 Pre-fail Always - 16851824
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 142 (52 200 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 14
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 063 058 040 Old_age Always - 37 (Min/Max 34/37)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 2
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 8
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 18
194 Temperature_Celsius 0x0022 037 042 000 Old_age Always - 37 (0 19 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 142 (166 211 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3142954732
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 299095913
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Hors ligne
#5 Le 25/04/2018, à 21:26
- inbox
Re : LUBUNTU 18.04 / Lenteur et freeze
Pour compléter, il faudrait le retour de :
dmesgUn problème résolu ? Indiquez le en modifiant le titre du sujet.
En ligne
#6 Le 25/04/2018, à 22:48
- ??
Re : LUBUNTU 18.04 / Lenteur et freeze
Bonsoir
Effectivement,cela gratte pas mal et c'est certainement lent. pourtant le disque est sensément neuf.
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 074 064 006 Pre-fail Always - 24050303
7 Seek_Error_Rate 0x000f 072 060 045 Pre-fail Always - 16851824
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 142 (52 200 0)Mais cela ne devrait pas empêcher le fonctionnement.
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#7 Le 25/04/2018, à 23:19
- xir01
Re : LUBUNTU 18.04 / Lenteur et freeze
Le retour de dmesg:
0.000000] gran_size: 16M chunk_size: 2G num_reg: 10 lose cover RAM: 14M
[ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 9 lose cover RAM: 46M
[ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 9 lose cover RAM: 46M
[ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 9 lose cover RAM: 46M
[ 0.000000] gran_size: 32M chunk_size: 256M num_reg: 9 lose cover RAM: 46M
[ 0.000000] gran_size: 32M chunk_size: 512M num_reg: 10 lose cover RAM: 46M
[ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 9 lose cover RAM: 46M
[ 0.000000] gran_size: 32M chunk_size: 2G num_reg: 10 lose cover RAM: 46M
[ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 7 lose cover RAM: 110M
[ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 7 lose cover RAM: 110M
[ 0.000000] gran_size: 64M chunk_size: 256M num_reg: 8 lose cover RAM: 110M
[ 0.000000] gran_size: 64M chunk_size: 512M num_reg: 9 lose cover RAM: 110M
[ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 8 lose cover RAM: 110M
[ 0.000000] gran_size: 64M chunk_size: 2G num_reg: 9 lose cover RAM: 110M
[ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 6 lose cover RAM: 174M
[ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 8 lose cover RAM: 174M
[ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 9 lose cover RAM: 174M
[ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 8 lose cover RAM: 174M
[ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 9 lose cover RAM: 174M
[ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 4 lose cover RAM: 430M
[ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 4 lose cover RAM: 430M
[ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 5 lose cover RAM: 430M
[ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 6 lose cover RAM: 430M
[ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 4 lose cover RAM: 430M
[ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 5 lose cover RAM: 430M
[ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 6 lose cover RAM: 430M
[ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 3 lose cover RAM: 942M
[ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 3 lose cover RAM: 942M
[ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 2 lose cover RAM: 1966M
[ 0.000000] mtrr_cleanup: can not find optimal value
[ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size
[ 0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x17bf3e000, 0x17bf3efff] PGTABLE
[ 0.000000] BRK [0x17bf3f000, 0x17bf3ffff] PGTABLE
[ 0.000000] BRK [0x17bf40000, 0x17bf40fff] PGTABLE
[ 0.000000] BRK [0x17bf41000, 0x17bf41fff] PGTABLE
[ 0.000000] BRK [0x17bf42000, 0x17bf42fff] PGTABLE
[ 0.000000] BRK [0x17bf43000, 0x17bf43fff] PGTABLE
[ 0.000000] BRK [0x17bf44000, 0x17bf44fff] PGTABLE
[ 0.000000] BRK [0x17bf45000, 0x17bf45fff] PGTABLE
[ 0.000000] BRK [0x17bf46000, 0x17bf46fff] PGTABLE
[ 0.000000] BRK [0x17bf47000, 0x17bf47fff] PGTABLE
[ 0.000000] BRK [0x17bf48000, 0x17bf48fff] PGTABLE
[ 0.000000] BRK [0x17bf49000, 0x17bf49fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x304cf000-0x3425efff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000CA485000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000CA485098 0000B4 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CA49BFE8 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CA485268 016D7C (v02 _ASUS_ Notebook 00000012 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000CAB0EF80 000040
[ 0.000000] ACPI: APIC 0x00000000CA49C0F8 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CA49C170 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000CA49C1B8 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: LPIT 0x00000000CA49C280 000094 (v01 ALASKA 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CA49C318 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CA49C858 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CA49D330 0002DE (v01 PmRef Cpu0Tst 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CA49D610 000348 (v01 PmRef ApTst 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000CA49D958 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000CA49D998 00306D (v01 DptfTa DptfTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: HPET 0x00000000CA4A0A08 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CA4A0A40 0002D7 (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CA4A0D18 003EDA (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CA4A4BF8 000D3B (v01 SgRef SgPch 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CA4A5938 0019E9 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CA4A7328 0006EB (v01 Intel_ IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: MSDM 0x00000000CA264E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f1fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x22f1d3000-0x22f1fdfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000022f1fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9f74fff]
[ 0.000000] node 0: [mem 0x00000000b9f7c000-0x00000000ba816fff]
[ 0.000000] node 0: [mem 0x00000000baaa8000-0x00000000ca053fff]
[ 0.000000] node 0: [mem 0x00000000ca267000-0x00000000ca400fff]
[ 0.000000] node 0: [mem 0x00000000cafff000-0x00000000caffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000022f1fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022f1fffff]
[ 0.000000] On node 0 totalpages: 2068724
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12862 pages used for memmap
[ 0.000000] DMA32 zone: 823127 pages, LIFO batch:31
[ 0.000000] Normal zone: 19400 pages used for memmap
[ 0.000000] Normal zone: 1241600 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Reserving Intel graphics memory at 0x00000000cbe00000-0x00000000cfdfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x20 (or later)
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9f75000-0xb9f7bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba817000-0xbaaa7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca054000-0xca266fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca401000-0xcab0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcab10000-0xcaf4ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcaf50000-0xcaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2036372
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=/dev/mapper/lubuntu--vg-root ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7788372K/8274896K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 486524K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39065 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2593.967 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.93 BogoMIPS (lpj=10375868)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028374] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.028408] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.028428] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.028652] CPU: Physical Processor ID: 0
[ 0.028653] CPU: Processor Core ID: 0
[ 0.028659] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.028660] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.028665] mce: CPU supports 7 MCE banks
[ 0.028674] CPU0: Thermal monitoring enabled (TM1)
[ 0.028687] process: using mwait in idle threads
[ 0.028690] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.028691] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.028692] Spectre V2 : Mitigation: Full generic retpoline
[ 0.029725] Freeing SMP alternatives memory: 36K
[ 0.040000] smpboot: CPU0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (family: 0x6, model: 0x45, stepping: 0x1)
[ 0.040000] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.040000] ... version: 3
[ 0.040000] ... bit width: 48
[ 0.040000] ... generic registers: 4
[ 0.040000] ... value mask: 0000ffffffffffff
[ 0.040000] ... max period: 00007fffffffffff
[ 0.040000] ... fixed-purpose events: 3
[ 0.040000] ... event mask: 000000070000000f
[ 0.040000] Hierarchical SRCU implementation.
[ 0.040000] smp: Bringing up secondary CPUs ...
[ 0.040000] x86: Booting SMP configuration:
[ 0.040000] .... node #0, CPUs: #1
[ 0.040000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.040000] #2 #3
[ 0.040000] smp: Brought up 1 node, 4 CPUs
[ 0.040000] smpboot: Max logical packages: 1
[ 0.040000] smpboot: Total of 4 processors activated (20751.73 BogoMIPS)
[ 0.040311] devtmpfs: initialized
[ 0.040311] x86/mm: Memory block size: 128MB
[ 0.040815] evm: security.selinux
[ 0.040816] evm: security.SMACK64
[ 0.040817] evm: security.SMACK64EXEC
[ 0.040817] evm: security.SMACK64TRANSMUTE
[ 0.040818] evm: security.SMACK64MMAP
[ 0.040818] evm: security.apparmor
[ 0.040819] evm: security.ima
[ 0.040820] evm: security.capability
[ 0.040836] PM: Registering ACPI NVS region [mem 0xb9f75000-0xb9f7bfff] (28672 bytes)
[ 0.040836] PM: Registering ACPI NVS region [mem 0xca401000-0xcab0ffff] (7401472 bytes)
[ 0.040836] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.040836] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.040836] pinctrl core: initialized pinctrl subsystem
[ 0.040836] RTC time: 21:05:01, date: 04/25/18
[ 0.040836] NET: Registered protocol family 16
[ 0.040836] audit: initializing netlink subsys (disabled)
[ 0.040836] audit: type=2000 audit(1524690301.040:1): state=initialized audit_enabled=0 res=1
[ 0.040836] cpuidle: using governor ladder
[ 0.040836] cpuidle: using governor menu
[ 0.040836] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.040836] ACPI: bus type PCI registered
[ 0.040836] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.040836] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.040836] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.040836] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.040836] PCI: Using configuration type 1 for base access
[ 0.040836] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.044010] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.044012] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.044087] ACPI: Added _OSI(Module Device)
[ 0.044088] ACPI: Added _OSI(Processor Device)
[ 0.044089] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.044090] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.044093] ACPI: EC: EC started
[ 0.044094] ACPI: EC: interrupt blocked
[ 0.046378] ACPI: \: Used as first EC
[ 0.046381] ACPI: \: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.046382] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.046382] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.059511] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.063444] ACPI: Dynamic OEM Table Load:
[ 0.063452] ACPI: SSDT 0xFFFF91FEA51B5C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.064262] ACPI: Dynamic OEM Table Load:
[ 0.064268] ACPI: SSDT 0xFFFF91FEA5137000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.065131] ACPI: Dynamic OEM Table Load:
[ 0.065136] ACPI: SSDT 0xFFFF91FEA51D7400 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.066995] ACPI: Interpreter enabled
[ 0.067040] ACPI: (supports S0 S3 S4 S5)
[ 0.067041] ACPI: Using IOAPIC for interrupt routing
[ 0.067078] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.067806] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.074023] ACPI: Power Resource [PC05] (on)
[ 0.093832] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.093839] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.094737] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.094738] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.095556] PCI host bridge to bus 0000:00
[ 0.095559] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.095561] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.095563] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.095564] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.095566] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.095568] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.095569] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.095571] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff window]
[ 0.095573] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.095583] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.095733] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.095746] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.095754] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.095759] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.095774] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.095895] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.095907] pci 0000:00:03.0: reg 0x10: [mem 0xf791c000-0xf791ffff 64bit]
[ 0.096057] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
[ 0.096070] pci 0000:00:04.0: reg 0x10: [mem 0xf7910000-0xf7917fff 64bit]
[ 0.096229] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.096249] pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
[ 0.096309] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.096427] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.096450] pci 0000:00:16.0: reg 0x10: [mem 0xf7924000-0xf792401f 64bit]
[ 0.096520] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.096641] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.096661] pci 0000:00:1b.0: reg 0x10: [mem 0xf7918000-0xf791bfff 64bit]
[ 0.096730] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.096847] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.096926] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.097124] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.097206] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.097397] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 0.097472] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.097665] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.097894] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.097910] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.097918] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.097925] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.097932] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.097939] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.097946] pci 0000:00:1f.2: reg 0x24: [mem 0xf7922000-0xf79227ff]
[ 0.097982] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.098092] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.098109] pci 0000:00:1f.3: reg 0x10: [mem 0xf7921000-0xf79210ff 64bit]
[ 0.098129] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.098263] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
[ 0.098297] pci 0000:00:1f.6: reg 0x10: [mem 0xf7920000-0xf7920fff 64bit]
[ 0.098576] acpiphp: Slot [1] registered
[ 0.098581] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.098924] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[ 0.099035] pci 0000:02:00.0: reg 0x10: [mem 0xf7800000-0xf7801fff 64bit]
[ 0.099432] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.108184] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.108189] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.108273] pci 0000:03:00.0: [10de:1341] type 00 class 0x030200
[ 0.108307] pci 0000:03:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.108325] pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.108343] pci 0000:03:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.108356] pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.108369] pci 0000:03:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.108379] pci 0000:03:00.0: enabling Extended Tags
[ 0.120049] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.120052] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.120056] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.120061] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.121615] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.121699] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.121782] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
[ 0.121868] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[ 0.121949] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.122030] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.122112] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[ 0.122192] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.122905] ACPI: EC: interrupt unblocked
[ 0.122913] ACPI: EC: event unblocked
[ 0.122921] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.122922] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.123174] SCSI subsystem initialized
[ 0.123188] libata version 3.00 loaded.
[ 0.123188] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.123188] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.123188] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.123188] vgaarb: loaded
[ 0.123188] ACPI: bus type USB registered
[ 0.123188] usbcore: registered new interface driver usbfs
[ 0.123188] usbcore: registered new interface driver hub
[ 0.123188] usbcore: registered new device driver usb
[ 0.123188] EDAC MC: Ver: 3.0.0
[ 0.123188] Registered efivars operations
[ 0.124024] PCI: Using ACPI for IRQ routing
[ 0.124400] PCI: pci_cache_line_size set to 64 bytes
[ 0.124720] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.124722] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.124723] e820: reserve RAM buffer [mem 0xb9f75000-0xbbffffff]
[ 0.124724] e820: reserve RAM buffer [mem 0xba817000-0xbbffffff]
[ 0.124725] e820: reserve RAM buffer [mem 0xca054000-0xcbffffff]
[ 0.124727] e820: reserve RAM buffer [mem 0xca401000-0xcbffffff]
[ 0.124729] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.124730] e820: reserve RAM buffer [mem 0x22f200000-0x22fffffff]
[ 0.124824] NetLabel: Initializing
[ 0.124825] NetLabel: domain hash size = 128
[ 0.124825] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.124841] NetLabel: unlabeled traffic allowed by default
[ 0.124857] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.124857] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.128002] clocksource: Switched to clocksource hpet
[ 0.140316] VFS: Disk quotas dquot_6.6.0
[ 0.140336] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.140445] AppArmor: AppArmor Filesystem Enabled
[ 0.140474] pnp: PnP ACPI init
[ 0.140626] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.140633] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.141007] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.141010] system 00:01: [io 0xffff] has been reserved
[ 0.141012] system 00:01: [io 0xffff] has been reserved
[ 0.141014] system 00:01: [io 0xffff] has been reserved
[ 0.141015] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.141017] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.141019] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.141021] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.141023] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.141025] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.141030] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.141059] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.141129] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.141134] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.141204] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.141208] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.141249] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.141253] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.141342] pnp 00:06: Plug and Play ACPI device, IDs FLT0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.141394] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.141954] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.142373] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.142375] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.142377] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.142379] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.142381] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.142383] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.142385] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.142387] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.142389] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.142392] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.142394] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.142396] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.142400] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.142523] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.143088] pnp: PnP ACPI: found 11 devices
[ 0.149263] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.149291] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.149302] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.149307] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.149315] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.149318] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.149322] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.149325] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.149332] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.149334] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.149335] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.149337] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.149339] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.149341] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.149342] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.149344] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff window]
[ 0.149346] pci_bus 0000:02: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.149348] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.149350] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.149351] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.149583] NET: Registered protocol family 2
[ 0.149792] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.149912] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.150040] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.150072] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.150099] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.150151] NET: Registered protocol family 1
[ 0.150164] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.150569] PCI: CLS 64 bytes, default 64
[ 0.150605] Unpacking initramfs...
[ 1.293626] Freeing initrd memory: 63040K
[ 1.293660] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.293663] software IO TLB [mem 0xb5f75000-0xb9f75000] (64MB) mapped at [00000000d4981080-00000000f1a602f5]
[ 1.293920] Scanning for low memory corruption every 60 seconds
[ 1.294592] Initialise system trusted keyrings
[ 1.294600] Key type blacklist registered
[ 1.294641] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.295929] zbud: loaded
[ 1.296510] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.296653] fuse init (API version 7.26)
[ 1.297853] Key type asymmetric registered
[ 1.297854] Asymmetric key parser 'x509' registered
[ 1.297885] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.297914] io scheduler noop registered
[ 1.297915] io scheduler deadline registered
[ 1.297961] io scheduler cfq registered (default)
[ 1.298674] pcieport 0000:00:1c.0: Signaling PME with IRQ 40
[ 1.298694] pcieport 0000:00:1c.3: Signaling PME with IRQ 41
[ 1.298712] pcieport 0000:00:1c.4: Signaling PME with IRQ 42
[ 1.298780] efifb: probing for efifb
[ 1.298792] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
[ 1.298793] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.298794] efifb: scrolling: redraw
[ 1.298796] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.298890] Console: switching to colour frame buffer device 128x48
[ 1.298907] fb0: EFI VGA frame buffer device
[ 1.298916] intel_idle: MWAIT substates: 0x11142120
[ 1.298917] intel_idle: v0.4.1 model 0x45
[ 1.299120] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.299284] ACPI: AC Adapter [AC0] (off-line)
[ 1.299359] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.299367] ACPI: Lid Switch [LID]
[ 1.299401] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.299424] ACPI: Sleep Button [SLPB]
[ 1.299459] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.299476] ACPI: Power Button [PWRF]
[ 1.302935] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.303114] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.303116] ACPI: Thermal Zone [THRM] (52 C)
[ 1.303314] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.305923] Linux agpgart interface v0.103
[ 1.307721] loop: module loaded
[ 1.307887] libphy: Fixed MDIO Bus: probed
[ 1.307888] tun: Universal TUN/TAP device driver, 1.6
[ 1.307928] PPP generic driver version 2.4.2
[ 1.307967] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.307969] ehci-pci: EHCI PCI platform driver
[ 1.307978] ehci-platform: EHCI generic platform driver
[ 1.307986] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.307988] ohci-pci: OHCI PCI platform driver
[ 1.307995] ohci-platform: OHCI generic platform driver
[ 1.308009] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.308159] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.308165] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.309265] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[ 1.309271] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.309439] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.309442] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.309444] usb usb1: Product: xHCI Host Controller
[ 1.309446] usb usb1: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[ 1.309448] usb usb1: SerialNumber: 0000:00:14.0
[ 1.309579] hub 1-0:1.0: USB hub found
[ 1.309594] hub 1-0:1.0: 9 ports detected
[ 1.309796] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.309802] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.309846] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.309848] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.309850] usb usb2: Product: xHCI Host Controller
[ 1.309852] usb usb2: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[ 1.309854] usb usb2: SerialNumber: 0000:00:14.0
[ 1.309982] hub 2-0:1.0: USB hub found
[ 1.309990] hub 2-0:1.0: 4 ports detected
[ 1.310175] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.317864] i8042: Detected active multiplexing controller, rev 1.1
[ 1.320653] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.320658] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.320689] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.320710] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.320731] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.320856] mousedev: PS/2 mouse device common for all mice
[ 1.321089] rtc_cmos 00:02: RTC can wake from S4
[ 1.321235] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.321261] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.321268] i2c /dev entries driver
[ 1.321318] device-mapper: uevent: version 1.0.3
[ 1.321387] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.321395] intel_pstate: Intel P-state driver initializing
[ 1.321605] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.321607] EFI Variables Facility v0.08 2004-May-17
[ 1.324079] NET: Registered protocol family 10
[ 1.327036] Segment Routing with IPv6
[ 1.327050] NET: Registered protocol family 17
[ 1.327076] Key type dns_resolver registered
[ 1.327251] RAS: Correctable Errors collector initialized.
[ 1.327272] microcode: sig=0x40651, pf=0x40, revision=0x17
[ 1.327310] microcode: Microcode Update Driver: v2.2.
[ 1.327318] sched_clock: Marking stable (1327307328, 0)->(1415132962, -87825634)
[ 1.327460] registered taskstats version 1
[ 1.327467] Loading compiled-in X.509 certificates
[ 1.329478] Loaded X.509 cert 'Build time autogenerated kernel key: f4ad6a5babf67650e4ceb385fa5dda8e4a178208'
[ 1.330920] Loaded UEFI:db cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' linked to secondary sys keyring
[ 1.331124] Loaded UEFI:db cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' linked to secondary sys keyring
[ 1.331144] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 1.331161] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 1.331363] Loaded UEFI:db cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[ 1.331616] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[ 1.331673] zswap: loaded using pool lzo/zbud
[ 1.334076] Key type big_key registered
[ 1.334080] Key type trusted registered
[ 1.335393] Key type encrypted registered
[ 1.335397] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.335399] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.335414] evm: HMAC attrs: 0x1
[ 1.336057] Magic number: 14:607:96
[ 1.336166] rtc_cmos 00:02: setting system clock to 2018-04-25 21:05:02 UTC (1524690302)
[ 1.336217] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.336217] EDD information not available.
[ 1.369955] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.454937] ACPI: Battery Slot [BAT0] (battery present)
[ 1.456822] Freeing unused kernel memory: 2404K
[ 1.456822] Write protecting the kernel read-only data: 20480k
[ 1.457229] Freeing unused kernel memory: 2008K
[ 1.460432] Freeing unused kernel memory: 1904K
[ 1.465414] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.465414] x86/mm: Checking user space page tables
[ 1.470215] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.576227] ipmi message handler version 39.2
[ 1.578007] ipmi device interface
[ 1.579108] ahci 0000:00:1f.2: version 3.0
[ 1.579304] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.589393] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 1.589397] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 1.590088] scsi host0: ahci
[ 1.590193] scsi host1: ahci
[ 1.590340] scsi host2: ahci
[ 1.590473] scsi host3: ahci
[ 1.590524] ata1: SATA max UDMA/133 abar m2048@0xf7922000 port 0xf7922100 irq 44
[ 1.590525] ata2: DUMMY
[ 1.590526] ata3: DUMMY
[ 1.590527] ata4: DUMMY
[ 1.605253] [drm] Memory usable by graphics device = 2048M
[ 1.605256] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 1.605257] fb: switching to inteldrmfb from EFI VGA
[ 1.605279] Console: switching to colour dummy device 80x25
[ 1.605376] [drm] Replacing VGA console driver
[ 1.611344] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.611345] [drm] Driver supports precise vblank timestamp query.
[ 1.613398] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.621807] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 1.621954] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 1.672346] PKCS#7 signature not signed with a trusted key
[ 1.672361] nvidia: loading out-of-tree module taints kernel.
[ 1.672370] nvidia: module license 'NVIDIA' taints kernel.
[ 1.672370] Disabling lock debugging due to kernel taint
[ 1.674089] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 1.675852] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 1.677775] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:11/LNXVIDEO:00/input/input12
[ 1.679639] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.682374] nvidia-nvlink: Nvlink Core is being initialized, major device number 242
[ 1.683008] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.48 Thu Mar 22 00:42:57 PDT 2018 (using threaded interrupts)
[ 1.683096] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 1.689880] PKCS#7 signature not signed with a trusted key
[ 1.690619] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.48 Wed Mar 21 23:48:34 PDT 2018
[ 1.691041] PKCS#7 signature not signed with a trusted key
[ 1.691504] [drm] [nvidia-drm] [GPU ID 0x00000300] Loading driver
[ 1.691506] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:03:00.0 on minor 1
[ 1.700970] fbcon: inteldrmfb (fb0) is primary device
[ 1.701027] Console: switching to colour frame buffer device 240x67
[ 1.701059] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.706660] input: FocalTechPS/2 FocalTech Touchpad as /devices/platform/i8042/serio4/input/input11
[ 1.732090] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 1.903641] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.907202] usb 1-5: New USB device found, idVendor=064e, idProduct=9700
[ 1.907204] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.907206] usb 1-5: Product: USB2.0 UVC HD Webcam
[ 1.907208] usb 1-5: Manufacturer: SuYin
[ 1.907209] usb 1-5: SerialNumber: HF1019-T838-SN03-Rev0101
[ 2.036094] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 2.088767] ata1.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
[ 2.088769] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.138619] ata1.00: configured for UDMA/133
[ 2.138872] scsi 0:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
[ 2.139225] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.139275] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 2.139278] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.139293] sd 0:0:0:0: [sda] Write Protect is off
[ 2.139295] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.139327] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.192944] usb 1-7: New USB device found, idVendor=03eb, idProduct=8a31
[ 2.192946] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.192948] usb 1-7: Product: Atmel maXTouch Digitizer
[ 2.192949] usb 1-7: Manufacturer: Atmel
[ 2.193018] sda: sda1 sda2
[ 2.193363] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.300061] tsc: Refined TSC clocksource calibration: 2593.995 MHz
[ 2.300070] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256413873f2, max_idle_ns: 440795261455 ns
[ 2.324098] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[ 2.473262] usb 1-8: New USB device found, idVendor=8087, idProduct=07dc
[ 2.473265] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.477739] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.485048] usbcore: registered new interface driver usbhid
[ 2.485049] usbhid: USB HID core driver
[ 2.486938] hid-generic 0003:03EB:8A31.0002: hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input1
[ 3.324222] clocksource: Switched to clocksource tsc
[ 37.809861] random: crng init done
[ 58.985362] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 61.278327] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 61.391352] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 61.408156] systemd[1]: Detected architecture x86-64.
[ 61.417682] systemd[1]: Set hostname to <steeve-UX303LN>.
[ 64.456848] systemd[1]: Reached target Remote File Systems.
[ 64.457086] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 64.457266] systemd[1]: Created slice System Slice.
[ 64.457393] systemd[1]: Created slice system-tor.slice.
[ 64.457477] systemd[1]: Listening on Journal Socket.
[ 64.457537] systemd[1]: Listening on Journal Socket (/dev/log).
[ 64.457584] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 65.098342] lp: driver loaded but no devices found
[ 65.182326] ppdev: user-space parallel port driver
[ 65.449269] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 65.892468] systemd-journald[329]: Received request to flush runtime journal from PID 1
[ 66.600224] Adding 4194300k swap on /swapfile. Priority:-2 extents:5 across:13172732k FS
[ 68.035507] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 68.071919] PKCS#7 signature not signed with a trusted key
[ 68.073922] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 239
[ 68.075649] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 68.206961] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input14
[ 69.237652] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 69.282384] ACPI Warning: \_SB.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[ 69.370842] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 69.370843] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 69.370844] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 69.370845] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 69.370845] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 69.519631] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 69.519852] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 69.573987] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 69.573990] cfg80211: failed to load regulatory.db
[ 69.707162] Intel(R) Wireless WiFi driver for Linux
[ 69.707163] Copyright(c) 2003- 2015 Intel Corporation
[ 69.714725] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 69.714786] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 69.714841] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 69.714897] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 69.995066] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[ 69.995362] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 69.995364] snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 69.995365] snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 69.995366] snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
[ 69.995367] snd_hda_codec_conexant hdaudioC1D0: inputs:
[ 69.995369] snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
[ 69.995370] snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
[ 69.996153] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
[ 69.998425] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 69.998465] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ 70.029922] iwlwifi 0000:02:00.0: loaded firmware version 17.608620.0 op_mode iwlmvm
[ 70.102315] asus_wmi: ASUS WMI generic driver loaded
[ 70.142122] asus_wmi: Initialization: 0x1
[ 70.142180] asus_wmi: BIOS WMI version: 7.9
[ 70.142268] asus_wmi: SFUN value: 0x4a2877
[ 70.143817] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input21
[ 70.145661] asus_wmi: Number of fans: 1
[ 70.148237] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:03EB:8A31.0001/input/input22
[ 70.148339] hid-multitouch 0003:03EB:8A31.0001: input,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input0
[ 70.237916] media: Linux media interface: v0.10
[ 70.263008] Linux video capture interface: v2.00
[ 70.296321] AVX2 version of gcm_enc/dec engaged.
[ 70.296322] AES CTR mode by8 optimization enabled
[ 70.674859] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (064e:9700)
[ 70.677481] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 70.677483] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 70.677485] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 70.677561] input: USB2.0 UVC HD Webcam: USB2.0 UV as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input23
[ 70.677634] usbcore: registered new interface driver uvcvideo
[ 70.677635] USB Video Class driver (1.1.1)
[ 71.266261] Bluetooth: Core ver 2.22
[ 71.266275] NET: Registered protocol family 31
[ 71.266276] Bluetooth: HCI device and connection manager initialized
[ 71.266278] Bluetooth: HCI socket layer initialized
[ 71.266280] Bluetooth: L2CAP socket layer initialized
[ 71.266284] Bluetooth: SCO socket layer initialized
[ 71.570534] intel_rapl: Found RAPL domain package
[ 71.570536] intel_rapl: Found RAPL domain core
[ 71.570537] intel_rapl: Found RAPL domain uncore
[ 71.570538] intel_rapl: Found RAPL domain dram
[ 71.570540] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 71.570544] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ 71.612007] usbcore: registered new interface driver btusb
[ 71.623856] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 71.667799] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 71.795869] Bluetooth: hci0: Intel firmware patch completed and activated
[ 71.830332] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[ 71.850918] iwlwifi 0000:02:00.0: base HW address: 7c:7a:91:66:5a:a3
[ 72.456187] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 72.646981] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 74.475077] Adding 999420k swap on /dev/mapper/lubuntu--vg-swap_1. Priority:-3 extents:1 across:999420k FS
[ 78.986309] audit: type=1400 audit(1524690380.144:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=666 comm="apparmor_parser"
[ 78.988631] audit: type=1400 audit(1524690380.148:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=664 comm="apparmor_parser"
[ 78.988635] audit: type=1400 audit(1524690380.148:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=664 comm="apparmor_parser"
[ 79.033059] audit: type=1400 audit(1524690380.192:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=665 comm="apparmor_parser"
[ 79.033064] audit: type=1400 audit(1524690380.192:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=665 comm="apparmor_parser"
[ 79.033067] audit: type=1400 audit(1524690380.192:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=665 comm="apparmor_parser"
[ 79.033070] audit: type=1400 audit(1524690380.192:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=665 comm="apparmor_parser"
[ 79.117264] audit: type=1400 audit(1524690380.276:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=667 comm="apparmor_parser"
[ 79.117267] audit: type=1400 audit(1524690380.276:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=667 comm="apparmor_parser"
[ 79.117269] audit: type=1400 audit(1524690380.276:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=667 comm="apparmor_parser"
[ 82.882150] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 82.882152] Bluetooth: BNEP filters: protocol multicast
[ 82.882155] Bluetooth: BNEP socket layer initialized
[ 89.418841] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 89.674513] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 90.104809] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 93.373030] wlp2s0: authenticate with 7c:26:64:8d:a7:ff
[ 93.395364] wlp2s0: send auth to 7c:26:64:8d:a7:ff (try 1/3)
[ 93.398293] wlp2s0: authenticated
[ 93.400044] wlp2s0: associate with 7c:26:64:8d:a7:ff (try 1/3)
[ 93.402251] wlp2s0: RX AssocResp from 7c:26:64:8d:a7:ff (capab=0x511 status=0 aid=30)
[ 93.426100] wlp2s0: associated
[ 93.447940] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 93.450405] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 7c:26:64:8d:a7:ff
[ 93.480360] nvidia-modeset: Allocated GPU:0 (GPU-a0e9a7f1-948b-20ed-3bdf-8b89dac2c6be) @ PCI:0000:03:00.0
[ 93.480626] nvidia-modeset: Freed GPU:0 (GPU-a0e9a7f1-948b-20ed-3bdf-8b89dac2c6be) @ PCI:0000:03:00.0
[ 94.901336] PKCS#7 signature not signed with a trusted key
[ 94.913121] vboxdrv: Found 4 processor cores
[ 94.932312] vboxdrv: TSC mode is Invariant, tentative frequency 2593993919 Hz
[ 94.932313] vboxdrv: Successfully loaded version 5.2.10_Ubuntu (interface 0x00290001)
[ 94.961254] PKCS#7 signature not signed with a trusted key
[ 94.961609] VBoxNetFlt: Successfully started.
[ 95.077796] PKCS#7 signature not signed with a trusted key
[ 95.078118] VBoxNetAdp: Successfully started.
[ 95.126364] PKCS#7 signature not signed with a trusted key
[ 95.126786] VBoxPciLinuxInit
[ 95.358473] vboxpci: IOMMU not found (not registered)
[ 97.693738] nvidia-modeset: Allocated GPU:0 (GPU-a0e9a7f1-948b-20ed-3bdf-8b89dac2c6be) @ PCI:0000:03:00.0
[ 97.694180] nvidia-modeset: Freed GPU:0 (GPU-a0e9a7f1-948b-20ed-3bdf-8b89dac2c6be) @ PCI:0000:03:00.0
[ 379.516871] nvidia-modeset: Allocated GPU:0 (GPU-a0e9a7f1-948b-20ed-3bdf-8b89dac2c6be) @ PCI:0000:03:00.0
[ 379.517630] nvidia-modeset: Freed GPU:0 (GPU-a0e9a7f1-948b-20ed-3bdf-8b89dac2c6be) @ PCI:0000:03:00.0
[ 446.697581] proc_thermal 0000:00:04.0: Unsupported event [0x84]
[ 447.705513] proc_thermal 0000:00:04.0: Unsupported event [0x84]
[ 618.865462] proc_thermal 0000:00:04.0: Unsupported event [0x84]Hors ligne
#8 Le 26/04/2018, à 11:00
- inbox
Re : LUBUNTU 18.04 / Lenteur et freeze
A priori, il n'y a pas de problème de avec le disque dur.
Tu pourrais procéder à un test de la RAM du PC avec Memtest, au démarrage. Il faut appuyer sur Shift (touche majuscule temporaire) pour accéder au menu de Grub.
Une fois Grub affiché, positionne toi sur la 1ère ligne "Memory test". Laisse tourner le test entre 30 et 60 minutes.
Si tu vois s'afficher des messages sur fond rouge, c'est que la RAM a un problème. Il faudra vérifier qu'elle correctement branchée (après avoir enlevé la batterie) et débranché le courant. Si elle correctement branchée, c'est que la RAM est défectueuse. Si tu as plusieurs barrettes de RAM, il faudra les tester séparément pour trouver le module défectueux.
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
En ligne
#9 Le 27/04/2018, à 16:58
- xir01
Re : LUBUNTU 18.04 / Lenteur et freeze
Bonjour Inbox,
Je ne suis pas arrivé à accéder au grub au démarrage. J'ai donc installer memtester qui peut etre lancé avec une ligne de commande
J'ai lancé la commande "sudo memtester 1024 5". Cette commande est-elle pertinente. J'ai eu en retour tout ok pendant les 5 cycles de test cependant je ferai remarqué que j'ai 8Go de mémoire RAM. A-t-il testé une seule des barette de RAM?
Si cette technique de remplacement n'est pas satisfaisante et en revenant à ton option comment accéder à Memtest au démarrage. La touche Schift maintenu enfoncé tout au long du démarrage n'a pas fonctionné pas plus qu'en la tapotant à intervalle rapproché..???:(
Hors ligne
#10 Le 27/04/2018, à 17:07
- inbox
Re : LUBUNTU 18.04 / Lenteur et freeze
Il faut appuyer sur la touche avant la fin de l'affichage du Bios ou équivalent, si le PC est récent.
Je ne connais pas "memtester".
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
En ligne
#11 Le 27/04/2018, à 21:35
- xir01
Re : LUBUNTU 18.04 / Lenteur et freeze
Merci Inbox mais rien n'y fait. Impossible d'atteindre le panneau grub....
Une idée ...????
Dernière modification par xir01 (Le 29/04/2018, à 22:02)
Hors ligne
#12 Le 27/04/2018, à 21:42
- xir01
Re : LUBUNTU 18.04 / Lenteur et freeze
Par contre, j'ai accéder au contenu du fichier run.log dans le dossier /home/steeve/.cache/lxsession/Lubuntu. Voici son contenu
"** Message: 21:33:51.724: environement.vala:58: Exporting primary_variable
** Message: 21:33:51.724: environement.vala:59: desktop_environnement XDG_CURRENT_DESKTOP
** Message: 21:33:51.724: environement.vala:177: custom_config :/etc/xdg/lubuntu:
** Message: 21:33:51.724: environement.vala:178: config_dirs :/etc/xdg/xdg-Lubuntu:/etc/xdg
** Message: 21:33:51.724: environement.vala:179: confir_dirs not null, export : /etc/xdg/lubuntu:/etc/xdg/xdg-Lubuntu:/etc/xdg
** Message: 21:33:51.724: environement.vala:184: Exporting XDG_CONFIG_DIRS
** Message: 21:33:51.724: environement.vala:218: custom_data :/etc/xdg/lubuntu:/usr/local/share:/usr/share:/usr/share/gdm:/var/lib/menu-xdg:
** Message: 21:33:51.724: environement.vala:219: data_dirs :/usr/share/Lubuntu:/usr/local/share/:/usr/share/
** Message: 21:33:51.724: environement.vala:220: data_dirs not null, export : /etc/xdg/lubuntu:/usr/local/share:/usr/share:/usr/share/gdm:/var/lib/menu-xdg:/usr/share/Lubuntu:/usr/local/share/:/usr/share/
** Message: 21:33:51.724: environement.vala:225: Exporting XDG_DATA_DIRS
** Message: 21:33:51.724: utils.vala:68: User config used : /home/steeve/.config/lxsession/Lubuntu/desktop.conf
** Message: 21:33:51.724: utils.vala:89: Final file used : /home/steeve/.config/lxsession/Lubuntu/desktop.conf
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « iGtk/ColorScheme » dans le groupe « GTK »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « dock/command » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « im2/command » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « widget1/command » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « notification/command » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « keybindings/command » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « im_manager/command » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « message_manager/command » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « updates_manager/command » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « updates_manager/timeout » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « crash_manager/command » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « crash_manager/dev_mode » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « crash_manager/timeout » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « proxy_manager/http » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « a11y/command » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « xrandr/command » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:540: Le fichier de clés ne contient pas de clé « charmap/command » dans le groupe « Session »
** Message: 21:33:51.724: settings.vala:462: Monitoring: /home/steeve/.config/lxsession/Lubuntu/desktop.conf
** Message: 21:33:51.724: settings.vala:466: Desktop file is already in config home, do nothing
** Message: 21:33:51.725: environement.vala:79: Exporting variable
** Message: 21:33:51.725: environement.vala:80: desktop_environnement XDG_CURRENT_DESKTOP
** Message: 21:33:51.725: environement.vala:177: custom_config :
** Message: 21:33:51.725: environement.vala:178: config_dirs :/etc/xdg/lubuntu:/etc/xdg/xdg-Lubuntu:/etc/xdg
** Message: 21:33:51.725: environement.vala:179: confir_dirs not null, export : /etc/xdg/lubuntu:/etc/xdg/xdg-Lubuntu:/etc/xdg
** Message: 21:33:51.725: environement.vala:184: Exporting XDG_CONFIG_DIRS
** Message: 21:33:51.725: environement.vala:218: custom_data :
** Message: 21:33:51.725: environement.vala:219: data_dirs :/etc/xdg/lubuntu:/usr/local/share:/usr/share:/usr/share/gdm:/var/lib/menu-xdg:/usr/share/Lubuntu:/usr/local/share/:/usr/share/
** Message: 21:33:51.725: environement.vala:220: data_dirs not null, export : /etc/xdg/lubuntu:/usr/local/share:/usr/share:/usr/share/gdm:/var/lib/menu-xdg:/usr/share/Lubuntu:/usr/local/share/:/usr/share/
** Message: 21:33:51.725: environement.vala:225: Exporting XDG_DATA_DIRS
** Message: 21:33:51.725: utils.vala:68: User config used : /home/steeve/.config/lxsession/Lubuntu/desktop.conf
** Message: 21:33:51.725: utils.vala:89: Final file used : /home/steeve/.config/lxsession/Lubuntu/desktop.conf
** Message: 21:33:51.725: environement.vala:254: No entry in [Environment_variable]. Le fichier de clés n’a pas de groupe « Environment_variable »
** Message: 21:33:51.725: utils.vala:79: Config system location : /etc/xdg/xdg-Lubuntu/lxsession/Lubuntu
** Message: 21:33:51.725: utils.vala:79: Config system location : /etc/xdg/lxsession/Lubuntu
** Message: 21:33:51.725: utils.vala:85: System system path location : /etc/xdg/lxsession/Lubuntu/conffiles.conf
** Message: 21:33:51.725: utils.vala:89: Final file used : /etc/xdg/lxsession/Lubuntu/conffiles.conf
** Message: 21:33:51.727: options.vala:164: Activate xsettings_manager build-in
** Message: 21:33:51.727: utils.vala:68: User config used : /home/steeve/.config/lxsession/Lubuntu/desktop.conf
** Message: 21:33:51.727: utils.vala:89: Final file used : /home/steeve/.config/lxsession/Lubuntu/desktop.conf
xprop: no such property "_NET_NUMBER_OF_DESKTOPS"
xprop: no such property "_NET_DESKTOP_NAMES"
** Message: 21:33:51.828: app.vala:76: Launching lxpanel
** Message: 21:33:52.117: app.vala:76: Launching xfce4-power-manager** (lxsession:1310): WARNING **: 21:33:52.118: app.vala:86: L’exécution du processus fils « dhcpcd-gtk » a échoué (Aucun fichier ou dossier de ce type)
** (lxsession:1310): WARNING **: 21:33:52.118: app.vala:87: Error when launching dhcpcd-gtk
Openbox-Message: La touche demandée « XF86Terminal » n'existe pas pour l'affichage
** Message: 21:33:52.205: app.vala:76: Launching pcmanfm
** Message: 21:33:52.205: app.vala:721: polkit separate
** Message: 21:33:52.205: app.vala:721: polkit separate
** Message: 21:33:52.206: app.vala:76: Launching lxpolkit
** Message: 21:33:52.206: utils.vala:68: User config used : /home/steeve/.config/lxsession/Lubuntu/autostart
** Message: 21:33:52.206: utils.vala:89: Final file used : /home/steeve/.config/lxsession/Lubuntu/autostart
** Message: 21:33:52.206: autostart.vala:42: Autostart path : /home/steeve/.config/lxsession/Lubuntu/autostart
** Message: 21:33:52.207: options.vala:107: Create build-in Clipboard
** Message: 21:33:52.208: main.vala:442: Check keymap_mode system
** Message: 21:33:52.208: main.vala:445: Create Option Keymap
** Message: 21:33:52.209: app.vala:76: Launching /usr/bin/ssh-agent
SSH_AUTH_SOCK=/tmp/ssh-jOaqwRvXYEM5/agent.1414; export SSH_AUTH_SOCK;
SSH_AGENT_PID=1418; export SSH_AGENT_PID;
echo Agent pid 1418;
** Message: 21:33:52.214: app.vala:130: /usr/bin/ssh-agent exit with this type of exit: 0
** Message: 21:33:52.238: bt: Name org.bluez owned on DBus
** Message: 21:33:52.240: bt: New agent manager found
** Message: 21:33:52.240: bt: New adapter found(lxpanel:1395): Gtk-CRITICAL **: 21:33:52.621: IA__gtk_image_get_pixbuf: assertion 'image->storage_type == GTK_IMAGE_PIXBUF || image->storage_type == GTK_IMAGE_EMPTY' failed
(lxpanel:1395): Gtk-CRITICAL **: 21:33:52.621: IA__gtk_image_get_pixbuf: assertion 'image->storage_type == GTK_IMAGE_PIXBUF || image->storage_type == GTK_IMAGE_EMPTY' failed
(lxpanel:1395): libindicator-WARNING **: 21:33:52.622: IndicatorObject class does not have an accessible description.
(update-notifier:1448): dbind-WARNING **: 21:33:52.685: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files
(nvidia-settings:1455): dbind-WARNING **: 21:33:52.702: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files
** Message: 21:33:52.733: app.vala:130: xfce4-power-manager exit with this type of exit: 0
** Message: 21:33:52.733: app.vala:139: Exit normal, don't reload(light-locker:1483): dbind-WARNING **: 21:33:52.827: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files
(nm-applet:1457): dbind-WARNING **: 21:33:52.839: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files
(nm-applet:1457): Gtk-WARNING **: 21:33:53.147: Can't set a parent on widget which has a parent
:3:common/rclinit.cpp:308::Configuration directory: /home/steeve/.recoll
:3:index/recollindex.cpp:608::recollindex: changing current directory to [/tmp]
:3:index/recollindex.cpp:641::recollindex: starting up(lxpanel:1395): GLib-CRITICAL **: 21:33:53.679: g_variant_get_type: assertion 'value != NULL' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.679: g_variant_type_is_subtype_of: assertion 'g_variant_type_check (type)' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_get_type: assertion 'value != NULL' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_type_is_subtype_of: assertion 'g_variant_type_check (type)' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_get_double: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_DOUBLE)' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_get_type: assertion 'value != NULL' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_type_is_subtype_of: assertion 'g_variant_type_check (type)' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_get_boolean: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_BOOLEAN)' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_get_type: assertion 'value != NULL' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_type_is_subtype_of: assertion 'g_variant_type_check (type)' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_get_double: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_DOUBLE)' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_get_type: assertion 'value != NULL' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_type_is_subtype_of: assertion 'g_variant_type_check (type)' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_get_double: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_DOUBLE)' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_get_type: assertion 'value != NULL' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_type_is_subtype_of: assertion 'g_variant_type_check (type)' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.682: g_variant_get_int32: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_INT32)' failed
(lxpanel:1395): Gtk-CRITICAL **: 21:33:53.683: IA__gtk_widget_realize: assertion 'GTK_WIDGET_ANCHORED (widget) || GTK_IS_INVISIBLE (widget)' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.697: g_variant_get_type: assertion 'value != NULL' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.697: g_variant_type_is_subtype_of: assertion 'g_variant_type_check (type)' failed
(lxpanel:1395): GLib-CRITICAL **: 21:33:53.697: g_variant_get_int32: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_INT32)' failed
(nm-applet:1457): Gtk-CRITICAL **: 21:33:56.667: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed
(nm-applet:1457): Gtk-CRITICAL **: 21:33:56.667: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed
(nm-applet:1457): Gtk-WARNING **: 21:33:56.677: Can't set a parent on widget which has a parent
(nm-applet:1457): Gtk-CRITICAL **: 21:33:56.683: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed
(nm-applet:1457): Gtk-CRITICAL **: 21:33:56.683: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed
(nm-applet:1457): Gtk-WARNING **: 21:33:56.693: Can't set a parent on widget which has a parent
firefox(lxpanel:1395): Wnck-WARNING **: 21:34:04.214: Unhandled action type _OB_WM_ACTION_UNDECORATE
(lxpanel:1395): Wnck-WARNING **: 21:34:05.309: Unhandled action type _OB_WM_ACTION_UNDECORATE
(lxpanel:1395): Wnck-WARNING **: 21:34:06.766: Unhandled action type _OB_WM_ACTION_UNDECORATE
pcmanfm(lxpanel:1395): Wnck-WARNING **: 21:36:00.074: Unhandled action type _OB_WM_ACTION_UNDECORATE
(lxpanel:1395): Wnck-WARNING **: 21:36:00.090: Unhandled action type _OB_WM_ACTION_UNDECORATE
match profile: profile-zero
match profile: profile-zero
match profile: profile-zero
leafpad '/home/steeve/.xsession-errors'(lxpanel:1395): Wnck-WARNING **: 21:36:12.337: Unhandled action type _OB_WM_ACTION_UNDECORATE
match profile: profile-zero
leafpad '/home/steeve/.xsession-errors.old'(lxpanel:1395): Wnck-WARNING **: 21:36:51.721: Unhandled action type _OB_WM_ACTION_UNDECORATE
match profile: profile-zero
leafpad '/home/steeve/testdisk.log'(lxpanel:1395): Wnck-WARNING **: 21:37:02.379: Unhandled action type _OB_WM_ACTION_UNDECORATE
match profile: profile-zero
match profile: profile-zero
match profile: profile-zero
match profile: profile-zero
leafpad '/home/steeve/.cache/lxsession/Lubuntu/run.log'
A noter aussi que j'ai semble-il un message d'erreur avec freedesktop qui est apparu lors des mises à jour.
C'est peut-etre un point de départ.
Dernière modification par xir01 (Le 27/04/2018, à 21:45)
Hors ligne
#13 Le 30/04/2018, à 13:53
- xir01
Re : LUBUNTU 18.04 / Lenteur et freeze
Un petit up pour arriver peut-etre à résoudre cette difficulté
Hors ligne
#14 Le 30/04/2018, à 22:22
- ??
Re : LUBUNTU 18.04 / Lenteur et freeze
Bonjour à tous,
Je viens d'installer LUBUNTU 18.04 sur mon laptop ASUS Zenbook UX-303L (8Go de ram)
Merci à tous
Bonjour
Je ne sais pas comment tu as fait pour installer à cette date la version 18.04.
Je te prie de la mettre à jour par les commandes suivantes:
sudo apt update
sudo apt full-upgradeet de positionner d'une façon moins débile le paramétrage de la RAM fournit par le fabricant avec ces commandes
echo vm.swappiness=5 | sudo tee /etc/sysctl.d/99-swappiness.confecho vm.vfs_cache_pressure=50 | sudo tee -a /etc/sysctl.d/99-swappiness.conf
sudo sysctl -p /etc/sysctl.d/99-swappiness.confDernière modification par ?? (Le 30/04/2018, à 22:26)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#15 Le 03/05/2018, à 14:25
- xir01
Re : LUBUNTU 18.04 / Lenteur et freeze
Merci ??,
J'ai tout mis à jour comme tu me l'as conseillé mais le fonctionnement reste anormalement poussif.
Je suis un peu perdu. Je vais essayer de tester avec Memtest 86+
Hors ligne
#16 Le 03/05/2018, à 14:29
- ??
Re : LUBUNTU 18.04 / Lenteur et freeze
Bonsoir
Effectivement,cela gratte pas mal et c'est certainement lent. pourtant le disque est sensément neuf.ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 074 064 006 Pre-fail Always - 24050303 7 Seek_Error_Rate 0x000f 072 060 045 Pre-fail Always - 16851824 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 142 (52 200 0)Mais cela ne devrait pas empêcher le fonctionnement.
Bonjour
Redonnes un état du disque pour voir l'évolution...
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#17 Le 03/05/2018, à 19:37
- xir01
Re : LUBUNTU 18.04 / Lenteur et freeze
Voici le retour de smartctl
sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de steeve :
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST2000LM015-2E8174
Serial Number: WDZ3370H
LU WWN Device Id: 5 000c50 0a8b51ed4
Firmware Version: SDM1
User Capacity: 2000398934016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu May 3 19:30:59 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 328) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 083 064 006 Pre-fail Always - 179253067
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 44
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 077 060 045 Pre-fail Always - 45554780
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 288 (133 214 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 44
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 071 055 040 Old_age Always - 29 (Min/Max 24/29)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 14
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 23
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 82
194 Temperature_Celsius 0x0022 029 045 000 Old_age Always - 29 (0 18 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 288 (131 134 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 6071034060
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2898982516
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Je dois ajouter qu'au fur et à mesure que ma session dure, ma machine me semble de moins en moins réactive jusqu'à freezer.
Eteindre l'ordi peut dureer 5-10 min.
...
aussi j'ai trouvé ce commentaire sur l'intégration de Lubuntu 18.04 sur une machine proche de la mienne sur le site officiel (https://lubuntu.me/bionic-released/) :
Desmond Aubery - April 28, 2018 at 3:28 am Severe kernel issues on ASUS UL50V. Machine usually rock solid for any Linux install I’ve thrown at it over the years. From USB load-up, kernel swicches computer off. Adjust to no acpi – gets a bit further – bombs during install. Very, very soft. Have re-installed 17.10, which has been rock solid across 3 of my computers. Will wait until later in the release cycle. Ouch… First real major blowout I’ve had in over 10 years. Sorry guys, for the bad news. I love Lubuntu.
Je me demande si je ne vais pas me réfugier dans une version moins récentes quitte à ce que ce ne soit pas une LTS...
Merci de l'aide...
Dernière modification par xir01 (Le 03/05/2018, à 19:39)
Hors ligne
#18 Le 08/05/2018, à 23:37
- xir01
Re : LUBUNTU 18.04 / Lenteur et freeze
Bonsoir,
Je suis finalement revenu à 16.04 LTS mais j'ai encore le problème. Mon ordinateur finit par "freezer" la session. Et lorsque la session se met en "veille prolongée", c'est très long pour en sortir.
Au démarrage, j'ai un message d'erreur qui s'affiche. Je ne sais où le journal de démarrage est affiché...
Si des idées germent... Ne pas hésiter... Je suis intéresser car tout ça me contrarie pour mon utilisation intensive de mon laptop.
Dernière modification par xir01 (Le 08/05/2018, à 23:38)
Hors ligne
#19 Le 09/05/2018, à 13:53
- ??
Re : LUBUNTU 18.04 / Lenteur et freeze
Bonjour.
Peux-tu donner le retour de cette commande?
journalctl -p errDernière modification par ?? (Le 09/05/2018, à 13:53)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#20 Le 21/05/2018, à 21:22
- jofi
Re : LUBUNTU 18.04 / Lenteur et freeze
Bonjour,
Comme xir01, je constate des blocages réguliers de PCmanFM rien qu'en navigant dans des documents. Durée 2-3 mn je pense. Le rapport d'erreur détaillé est inaccessible, la fenêtre plante, et ça finit par une fermeture complète de PCManFM et une réinitialisation ou un vidage des icônes du bureau.
J'ai installé Lubuntu 64 en 18.04LTS il y a quelques semaines sur une machine plus très récente mais quand même double coeur et 4 Go de RAM. Jamais eu ce genre de problème sous Windows 7 ou Debian 8 avec LXDE. Ni au début avec Lubuntu à la réflexion, ça empire depuis que j'ai rajouté Thunderbird, Sane, Libreoffice, Inkscape (ce dernier est inutilisable pour l'instant, plante trop souvent).
Après test, pas de problème disque (smartctl OK) ou de RAM (memtest OK). Moi aussi je trouve que le disque dur gratte plutôt à ces moments-là. 'top' montre une utilisation faible vers 10%, 'free' annonce la moitié de la mémoire dispo et pas d'utilisation du swap. les 'dmesg' ou autre 'journalctl' ne montre rien de particulier au moment du plantage.
En farfouillant dans /var/log, j'ai trouvé 3 blocs plus ou moins identiques aujourd'hui dans /var/log/apport.log (2 plantages pcmanfm et 1 avec Inkscape):
ERROR: apport (pid 24766) Mon May 21 12:08:30 2018: called for pid 3652, signal 6, core limit 0, dump mode 1
ERROR: apport (pid 24766) Mon May 21 12:08:30 2018: executable: /usr/bin/pcmanfm (command line "pcmanfm --desktop --profile lubuntu")
ERROR: apport (pid 24766) Mon May 21 12:08:30 2018: gdbus call error: Error: DBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
ERROR: apport (pid 24766) Mon May 21 12:08:30 2018: debug: session gdbus call:
ERROR: apport (pid 24766) Mon May 21 12:08:30 2018: this executable already crashed 2 times, ignoringUne instabilité connue GTK+ avec DBus? Il y aurait quelque chose à faire pour améliorer ça?
Merci
Hors ligne
#21 Le 21/05/2018, à 22:11
- ??
Re : LUBUNTU 18.04 / Lenteur et freeze
Bonsoir jofi.
Je pense qu'il serait mieux que tu ouvres une discussion nouvelle. Tu as déjà diagnostiqué "crashed 2 times"
Dernière modification par ?? (Le 21/05/2018, à 22:13)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#22 Le 22/05/2018, à 03:28
- pipiri
Re : LUBUNTU 18.04 / Lenteur et freeze
Bonsoir Jofi
Les symptôme que tu décrits ressemble à ceux que j'ai connu, regarde ici peut être que tu trouveras un début de solution
Hors ligne
#23 Le 22/05/2018, à 13:52
- jofi
Re : LUBUNTU 18.04 / Lenteur et freeze
Bonjour ?? (l'homme invisible? 
)
Tu as déjà diagnostiqué "crashed 2 times"
C'est parce que je n'ai copié que la 2ème série de lignes dans les logs, PCman avait déjà planté avant.
Les symptôme que tu décrits ressemble à ceux que j'ai connu, regarde ici peut être que tu trouveras un début de solution
Merci pipiri, mais je n'ai pas de problème d'affichage, c'était juste un ralentissement puis un plantage.
De nouveaux éléments de mon côté: hier soir, le bureau n'a pas redémarré, il restait noir, sans icones, et j'avais le message "gestionnaire de bureau inactif" dans menu "Préférences/Préférences du bureau".
J'ai redémarré manuellement avec:
pcmanfm --desktop &Et je ne constatais plus de problème.
Comme j'avais vu ça dans mes recherches de commandes pour PCmanFM, j'ai réinstallé pcmanfm:
sudo apt-get install pcmanfm --reinstallTout ce matin, c'est fuide plus de problème.
Et pourtant la version de PCMan n'a pas changé, avant et après réinstall:
apt list pcmanfm
En train de lister... Fait
pcmanfm/bionic,now 1.2.5-3ubuntu1 amd64 [installé, automatique]Donc pour moi, c'est réglé, à voir si ça sert à xir01...
Hors ligne