#26 Le 23/08/2018, à 18:35
- NicoApi73
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
Peux tu faire la même manip, toujours avec nomodeset, mais en supprimant quiet et splash.
splash fait apparaître le logo
C'est surtout quiet qui m'intéresse (de le virer) : ça va t'afficher un ensemble de lignes de boot. On verra laquelle plante... (enfin j'espère)
Dernière modification par NicoApi73 (Le 23/08/2018, à 18:35)
Hors ligne
#27 Le 23/08/2018, à 18:47
- Sofandre
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
La dernière ligne qui s'affiche est
"Starting Hostname Service..."
Et tiret clignotant sur la ligne suivante
Hors ligne
#28 Le 23/08/2018, à 18:57
- NicoApi73
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
J'ai besoin de faire quelques recherches, je dois me déconnecter pour l'instant. Ca a l'air de confirmer un problème avec la carte graphique (j'entends par là que le driver n'est pas approprié ou que la carte est mal configurée, ce n'est à priori pas un problème matériel)
En attendant, tu peux essayer avec le paramètre suivant, à la place de nomodeset :
Ecrire "modprobe.blacklist=nouveau" entre splash et la fin (---), avec un espace entre splash et mod... et un espace entre nouveau et ---. Remarque, il n'y a aucun espace dans modprobe.blacklist=nouveau (quand le clavier est un clavier AZERTY il faut taper ,odprobe:blqcklist=nouvequ pour que s'affiche modprobe.blacklist=nouveau
Tu vas forcer l'ordinateur à gérer l'affichage sans le driver nouveau. Si ça démarre, regarde si un driver propriétaire est proposé.
Hors ligne
#29 Le 23/08/2018, à 19:05
- Sofandre
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
J'ai essayé avec modprobe et ça ne démarre pas. L'écran reste bloqué sur xubuntu.
Hors ligne
#30 Le 23/08/2018, à 20:27
- NicoApi73
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
La dernière ligne qui s'affiche est
"Starting Hostname Service..."
Et tiret clignotant sur la ligne suivante
Peux tu essayer d'ouvrir un shell à ce moment là (ctrl+F1)
Ta carte graphique est une gma3150. Le driver est intégré dans le noyau.
Comme tu n'arrives pas à booter, nous ne pouvons pas savoir quel est le driver graphique utilisé.
Tu peux également essayer en passant le paramètre suivant :
modprobe.blacklist=gma3150 (qui doit s'écrire ,odprobe:blqcklist=gmq3150
Je reste sur l'hypothèse que c'est un bug au niveau de la prise en charge de la carte graphique. Je parle de bug puisque ça fonctionnait avec une 14.04. Ca reste néanmoins qu'une hypothèse et donc nous sommes peut être entrain de perdre notre temps.
Hors ligne
#31 Le 23/08/2018, à 20:45
- NicoApi73
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
https://bugs.archlinux.org/task/47509 : ça ressemble à ce que tu as, même si le sujet est un peu vieux.
Essaie avec le paramètre suivant :
systemd.restore_state=0 (à la place de nomodeset). Avec un clavier AZERTY ça se tape : syste,d:restore°stqte=0 (° il faut appuyer sur shift, le dernier symbole c'est zéro)
Hors ligne
#32 Le 23/08/2018, à 21:45
- Sofandre
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
https://bugs.archlinux.org/task/47509 : ça ressemble à ce que tu as, même si le sujet est un peu vieux.
Essaie avec le paramètre suivant :
systemd.restore_state=0 (à la place de nomodeset). Avec un clavier AZERTY ça se tape : syste,d:restore°stqte=0 (° il faut appuyer sur shift, le dernier symbole c'est zéro)
Je viens d'essayer avec ce paramètre et Xubuntu a démarré !
Hors ligne
#33 Le 23/08/2018, à 21:49
- Sofandre
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
Est-ce qu'il y a d'autres choses à faire ? Ou on peut considérer que le problème est résolu ?
Hors ligne
#34 Le 24/08/2018, à 04:06
- NicoApi73
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
Salut,
Pour l'instant le paramètre doit être mis à chaque fois que tu bootes. Donc, redémarre en utilisant la même procédure que celle qui a fonctionné.
Une fois que ta session est ouverte, ouvre un shell (terminal) :
sudo cp /etc/default/grub /etc/default/grub.old
sudo nano /etc/default/grub
sur la ligne GRUB_CMDLINE_LINUX_DEFAULT, ajouter systemd.restore_state=0
Ca doit donner quelque chose comme
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash systemd.restore_state=0"
sauvegarder (ctrl o)
Entrée
quitter (ctrl x)
sudo update-grub
reboot
Tiens nous au courant si ça fonctionne et si c'est le cas, tu pourras passer le sujet en résolu en éditant ton premier message et en modifiant le titre en ajoutant [Résolu] en tête.
Dernière modification par NicoApi73 (Le 24/08/2018, à 04:26)
Hors ligne
#35 Le 24/08/2018, à 06:13
- malbo
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
Bonjour,
Si c'est résolu par la manip détaillée dans le post #34, je te prie de faire un Boot-Info depuis une session de ton Xubuntu installé et de donner L'URL de ce Boot-Info dans ta réponse. Cela permettra de vérifier l'état final de ton installation.
Pour info : dans cet autre fil, on peut voir que moinefrancisco est tombé sur ce même problème avec Xubuntu 16.04.1 sur son Dell Inspiron Mini 1018 (voir son post #12).
Dernière modification par malbo (Le 24/08/2018, à 06:23)
Hors ligne
#36 Le 24/08/2018, à 07:47
- NicoApi73
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
Salut malbo,
Merci pour l'info, ça donne une explication technique. Je ne l'avais pas trouvé ce fil là. Conseilles tu de rester avec le paramètre dans grub ou de virer le service avec systemctl?
@Sofrandre, j'ai oublié de te rappeler de faire les mises à jour et de les faire ensuite régulièrement :
sudo apt update
sudo apt full-upgrade
Et minimum une fois par mois :
sudo apt autoremove --purge
pour virer ce qui ne sert plus à rien
Si tu installes des ppa, fais attention avec leur maintenance : full-upgrade tire tous les paquets...
Hors ligne
#37 Le 24/08/2018, à 08:02
- malbo
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
Conseilles tu de rester avec le paramètre dans grub ou de virer le service avec systemctl?
Même si moinefrancisco l'a résolu d'une autre façon, je pense que ce que tu proposes dans le post #34 est la meilleure solution du point de vue de la simplicité de réalisation et du point de vue de la visibilité pour les aidants qui auraient à intervenir dans l'installation de Sofandre (un paramètre de noyau ajouté, ça saute aux yeux)
Dernière modification par malbo (Le 24/08/2018, à 08:04)
Hors ligne
#38 Le 24/08/2018, à 15:26
- Sofandre
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
Hors ligne
#39 Le 24/08/2018, à 15:31
- NicoApi73
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
Salut,
Voici ton boot-info :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 488,396,799 488,394,752 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 91a51474-47e4-46a5-af05-a91f338fb31b ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Aug 24 11:19 ata-TOSHIBA_MK2565GSX_X0B8BQDPB -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 24 11:19 ata-TOSHIBA_MK2565GSX_X0B8BQDPB-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 Aug 24 11:19 wwn-0x50000392d95027a4 -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 24 11:19 wwn-0x50000392d95027a4-part1 -> ../../sda1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 91a51474-47e4-46a5-af05-a91f338fb31b
else
search --no-floppy --fs-uuid --set=root 91a51474-47e4-46a5-af05-a91f338fb31b
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-91a51474-47e4-46a5-af05-a91f338fb31b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 91a51474-47e4-46a5-af05-a91f338fb31b
else
search --no-floppy --fs-uuid --set=root 91a51474-47e4-46a5-af05-a91f338fb31b
fi
linux /boot/vmlinuz-4.15.0-20-generic root=UUID=91a51474-47e4-46a5-af05-a91f338fb31b ro quiet splash systemd.restore_state=0 $vt_handoff
initrd /boot/initrd.img-4.15.0-20-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-91a51474-47e4-46a5-af05-a91f338fb31b' {
menuentry 'Ubuntu, avec Linux 4.15.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-advanced-91a51474-47e4-46a5-af05-a91f338fb31b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 91a51474-47e4-46a5-af05-a91f338fb31b
else
search --no-floppy --fs-uuid --set=root 91a51474-47e4-46a5-af05-a91f338fb31b
fi
echo 'Chargement de Linux 4.15.0-20-generic…'
linux /boot/vmlinuz-4.15.0-20-generic root=UUID=91a51474-47e4-46a5-af05-a91f338fb31b ro quiet splash systemd.restore_state=0 $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-20-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-recovery-91a51474-47e4-46a5-af05-a91f338fb31b' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 91a51474-47e4-46a5-af05-a91f338fb31b
else
search --no-floppy --fs-uuid --set=root 91a51474-47e4-46a5-af05-a91f338fb31b
fi
echo 'Chargement de Linux 4.15.0-20-generic…'
linux /boot/vmlinuz-4.15.0-20-generic root=UUID=91a51474-47e4-46a5-af05-a91f338fb31b ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-20-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 91a51474-47e4-46a5-af05-a91f338fb31b
else
search --no-floppy --fs-uuid --set=root 91a51474-47e4-46a5-af05-a91f338fb31b
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 91a51474-47e4-46a5-af05-a91f338fb31b
else
search --no-floppy --fs-uuid --set=root 91a51474-47e4-46a5-af05-a91f338fb31b
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb1 during installation
UUID=91a51474-47e4-46a5-af05-a91f338fb31b / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
4.256450653 = 4.570329088 boot/grub/grub.cfg 1
78.143302917 = 83.905732608 boot/grub/i386-pc/core.img 1
42.140312195 = 45.247815680 boot/vmlinuz-4.15.0-20-generic 1
42.140312195 = 45.247815680 vmlinuz 1
3.696285248 = 3.968856064 boot/initrd.img-4.15.0-20-generic 2
3.696285248 = 3.968856064 initrd.img 2
3.696285248 = 3.968856064 initrd.img.old 2
ADDITIONAL INFORMATION :
=================== log of boot-info 20180824_1119 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04 LTS, bionic, Ubuntu, i686)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=91a51474-47e4-46a5-af05-a91f338fb31b ro quiet splash systemd.restore_state=0 vt.handoff=1
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 18.04 LTS CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="91a51474-47e4-46a5-af05-a91f338fb31b" TYPE="ext4" PARTUUID="9962dc65-01"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 26 15:24 grub.d
total 80
-rwxr-xr-x 1 root root 9783 mars 4 10:11 00_header
-rwxr-xr-x 1 root root 6258 mars 4 10:11 05_debian_theme
-rwxr-xr-x 1 root root 12693 mars 4 10:11 10_linux
-rwxr-xr-x 1 root root 11298 mars 4 10:11 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars 4 10:11 30_os-prober
-rwxr-xr-x 1 root root 1418 mars 4 10:11 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mars 4 10:11 40_custom
-rwxr-xr-x 1 root root 216 mars 4 10:11 41_custom
-rw-r--r-- 1 root root 483 mars 4 10:11 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash systemd.restore_state=0"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not EFI-compatible.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:250GB:scsi:512:512:msdos:ATA TOSHIBA MK2565GS:;
1:1049kB:250GB:250GB:ext4::boot;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 232,9G
sda1 part ext4 232,9G
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=480736k,nr_inodes=120184,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=101176k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14392)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=101172k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse gpiochip0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 initctl input kmsg lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 470M 0 470M 0% /dev
tmpfs tmpfs 99M 1.2M 98M 2% /run
/dev/sda1 ext4 229G 5.8G 211G 3% /
tmpfs tmpfs 495M 16M 479M 4% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 495M 0 495M 0% /sys/fs/cgroup
tmpfs tmpfs 99M 16K 99M 1% /run/user/1000
=================== fdisk -l:
Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x9962dc65
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 488396799 488394752 232.9G 83 Linux
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 18.04 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
Tu as bien configuré ton grub :
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash systemd.restore_state=0"
N'oublie pas de passer ton sujet en résolu.
Hors ligne
#40 Le 24/08/2018, à 16:04
- malbo
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
Je viens d'ajouter ton modèle Inspiron Mini 1018 dans la Liste des portables « Dell ». Ce modèle - décrit sur cette page - est équipé d'un processeur Intel Atom N455
Hors ligne
#41 Le 24/08/2018, à 16:24
- Sofandre
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
Merci
Hors ligne
#42 Le 25/08/2018, à 07:28
- NicoApi73
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
Bonjour Sofrande,
Garde en mémoire le post #19 de malbo. Ton disque dire a réalloué quelques secteurs défectueux, ce n'est plus très sain. Tu peux continuer avec, mais fais des sauvegardes très régulièrement de tes données sur un disque externe.
Hors ligne
#43 Le 25/08/2018, à 12:50
- Sofandre
Re : [Résolu]Problème installation Xubuntu 18.04 - l'ordi ne redémarre pas
Bonjour NicoApi73,
Je te remercie. Je vais me renseigner pour faire changer mon disque dur.
Merci pour ton aide précieuse.
Hors ligne