[Résolu] Démarrage très lent Ubuntu 18.04.1

f.vuilliomenet · Le 28/08/2018, à 16:10

oui je vais faire mes sauvegarde et faire une installation propre depuis 0.
Je test sur mon 2ème disque
merci de votre aide
je reviens dès que c'est tester

f.vuilliomenet · Le 28/08/2018, à 16:12

ha oui si quelqu'un sait comment faire sans les snap. je suis preneur

Mornagest · Le 28/08/2018, à 16:25

Aucune idée, je n'ai jamais utilisé snap (j'ai découvert son existence il y a quelques jours et je ne vois aucun intérêt à ce machin).

Tu as effectué des installations de logiciels via ce système ?

f.vuilliomenet · Le 28/08/2018, à 17:37

normalement pas, je passe par la biblio ubuntu (exception de Teamviewer)

f.vuilliomenet · Le 28/08/2018, à 17:44

Par contre installation toutes neuve du Jour
Démarrage 1 minute (c'est mieux...)

dmesg:

[    0.000000] microcode: microcode updated early to revision 0x2b, date = 2018-03-22
[    0.000000] Linux version 4.15.0-33-generic (buildd@lcy01-amd64-024) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #36-Ubuntu SMP Wed Aug 15 16:00:05 UTC 2018 (Ubuntu 4.15.0-33.36-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=UUID=0622aaec-ac6d-4d65-b7af-510a467492fc ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000087fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096f79fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000096f7a000-0x0000000097879fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009787a000-0x000000009c48efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009c48f000-0x000000009c68efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000009c68f000-0x000000009ce7efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  SMBIOS=0x9c708000  ACPI 2.0=0x9cffe014 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 80MR/Lenovo B70-80, BIOS D1CN06WW 05/18/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 009D000000 mask 7FFF000000 uncachable
[    0.000000]   2 base 009E000000 mask 7FFE000000 uncachable
[    0.000000]   3 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 14800M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 2e000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1fef3f000, 0x1fef3ffff] PGTABLE
[    0.000000] BRK [0x1fef40000, 0x1fef40fff] PGTABLE
[    0.000000] BRK [0x1fef41000, 0x1fef41fff] PGTABLE
[    0.000000] BRK [0x1fef42000, 0x1fef42fff] PGTABLE
[    0.000000] BRK [0x1fef43000, 0x1fef43fff] PGTABLE
[    0.000000] BRK [0x1fef44000, 0x1fef44fff] PGTABLE
[    0.000000] BRK [0x1fef45000, 0x1fef45fff] PGTABLE
[    0.000000] BRK [0x1fef46000, 0x1fef46fff] PGTABLE
[    0.000000] BRK [0x1fef47000, 0x1fef47fff] PGTABLE
[    0.000000] BRK [0x1fef48000, 0x1fef48fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31615000-0x34b01fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000009CFD0188 0000D4 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009CFF6000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000009CFE0000 00FE6F (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009CF7A000 000040
[    0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009CFFA000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000009CFF8000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000009CFF4000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000009CFF2000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x000000009CFF0000 000224 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDC000 00340B (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDB000 000539 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD4000 005C31 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000009CFFB000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000009CFF7000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000009CFF3000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDA000 000B74 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000009CFF9000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SLIC 0x000000009CFF1000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000009CFF5000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000009CFD3000 0000F8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: CSRT 0x000000009CFD2000 0000C4 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000009CFD1000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000009CFCF000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x25efd5000-0x25effffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000025effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000087fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000096f79fff]
[    0.000000]   node   0: [mem 0x000000009787a000-0x000000009c48efff]
[    0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000025effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
[    0.000000] On node 0 totalpages: 2075414
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 1120 pages reserved
[    0.000000]   DMA zone: 3974 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9903 pages used for memmap
[    0.000000]   DMA32 zone: 633744 pages, LIFO batch:31
[    0.000000]   Normal zone: 22464 pages used for memmap
[    0.000000]   Normal zone: 1437696 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 99 pages
[    0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x96f7a000-0x97879fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9c48f000-0x9c68efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9c68f000-0x9ce7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9dffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2041863
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=UUID=0622aaec-ac6d-4d65-b7af-510a467492fc ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7960508K/8301656K available (12300K kernel code, 2470K rwdata, 4244K rodata, 2408K init, 2416K bss, 341148K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39121 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 39
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.000000] DMAR: RMRR base: 0x0000009ce24000 end: 0x0000009ce43fff
[    0.000000] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[    0.000000] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[    0.000000] DMAR: ANDD device: 2 name: \_SB.PCI0.SDHC
[    0.000000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 2394.535 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.07 BogoMIPS (lpj=9578140)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.028189] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.028973] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.029011] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029037] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029246] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.029247] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.029251] mce: CPU supports 7 MCE banks
[    0.029267] process: using mwait in idle threads
[    0.029270] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.029270] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.029272] Spectre V2 : Mitigation: Full generic retpoline
[    0.029273] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.029273] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.029274] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.035536] Freeing SMP alternatives memory: 36K
[    0.039745] TSC deadline timer enabled
[    0.039747] smpboot: CPU0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.039809] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.039852] ... version:                3
[    0.039852] ... bit width:              48
[    0.039853] ... generic registers:      4
[    0.039854] ... value mask:             0000ffffffffffff
[    0.039854] ... max period:             00007fffffffffff
[    0.039855] ... fixed-purpose events:   3
[    0.039855] ... event mask:             000000070000000f
[    0.039888] Hierarchical SRCU implementation.
[    0.040000] smp: Bringing up secondary CPUs ...
[    0.040000] x86: Booting SMP configuration:
[    0.040000] .... node  #0, CPUs:      #1
[    0.040000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.040000]  #2 #3
[    0.040506] smp: Brought up 1 node, 4 CPUs
[    0.040506] smpboot: Max logical packages: 1
[    0.040506] smpboot: Total of 4 processors activated (19156.28 BogoMIPS)
[    0.044252] devtmpfs: initialized
[    0.044252] x86/mm: Memory block size: 128MB
[    0.044697] evm: security.selinux
[    0.044697] evm: security.SMACK64
[    0.044698] evm: security.SMACK64EXEC
[    0.044698] evm: security.SMACK64TRANSMUTE
[    0.044699] evm: security.SMACK64MMAP
[    0.044699] evm: security.apparmor
[    0.044700] evm: security.ima
[    0.044700] evm: security.capability
[    0.044713] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
[    0.044713] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.044713] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.044713] pinctrl core: initialized pinctrl subsystem
[    0.044713] RTC time: 15:33:32, date: 08/28/18
[    0.044713] NET: Registered protocol family 16
[    0.044713] audit: initializing netlink subsys (disabled)
[    0.044713] audit: type=2000 audit(1535470412.044:1): state=initialized audit_enabled=0 res=1
[    0.044713] cpuidle: using governor ladder
[    0.044713] cpuidle: using governor menu
[    0.044713] Simple Boot Flag at 0x44 set to 0x1
[    0.044713] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.044713] ACPI: bus type PCI registered
[    0.044713] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.044713] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.044713] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.044713] PCI: Using configuration type 1 for base access
[    0.045194] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.045194] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.045194] ACPI: Added _OSI(Module Device)
[    0.045194] ACPI: Added _OSI(Processor Device)
[    0.045194] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.045194] ACPI: Added _OSI(Processor Aggregator Device)
[    0.045194] ACPI: Added _OSI(Linux-Dell-Video)
[    0.045194] ACPI: Executed 7 blocks of module-level executable AML code
[    0.056029] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.057480] ACPI: Dynamic OEM Table Load:
[    0.057489] ACPI: SSDT 0xFFFF99D1D4949400 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20121220)
[    0.060052] ACPI: Dynamic OEM Table Load:
[    0.060061] ACPI: SSDT 0xFFFF99D1D4DD1000 0005AA (v02 PmRef  ApIst    00003000 INTL 20121220)
[    0.060641] ACPI: Dynamic OEM Table Load:
[    0.060641] ACPI: SSDT 0xFFFF99D1D4909800 000119 (v02 PmRef  ApCst    00003000 INTL 20121220)
[    0.061289] ACPI: EC: EC started
[    0.061290] ACPI: EC: interrupt blocked
[    0.064050] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.064052] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.064053] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.064054] ACPI: Interpreter enabled
[    0.064099] ACPI: (supports S0 S3 S4 S5)
[    0.064100] ACPI: Using IOAPIC for interrupt routing
[    0.064141] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.064574] ACPI: GPE 0x62 active on init
[    0.064592] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.086519] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.086526] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.087787] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.087788] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.088929] PCI host bridge to bus 0000:00
[    0.088931] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.088933] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.088934] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.088936] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
[    0.088938] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.088946] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.089281] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.089295] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[    0.089301] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.089306] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.089320] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.089653] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.089664] pci 0000:00:03.0: reg 0x10: [mem 0xc1210000-0xc1213fff 64bit]
[    0.090020] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.090039] pci 0000:00:14.0: reg 0x10: [mem 0xc1200000-0xc120ffff 64bit]
[    0.090095] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.090413] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.090435] pci 0000:00:16.0: reg 0x10: [mem 0xc121b000-0xc121b01f 64bit]
[    0.090502] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.090818] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.090837] pci 0000:00:1b.0: reg 0x10: [mem 0xc1214000-0xc1217fff 64bit]
[    0.090893] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.091204] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.091271] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.091646] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.091716] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.092092] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[    0.092161] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.092537] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[    0.093743] pci 0000:00:1d.0: reg 0x10: [mem 0xc1219000-0xc12193ff]
[    0.097228] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.097550] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.097972] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.097987] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.097993] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.097999] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.098006] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.098012] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.098019] pci 0000:00:1f.2: reg 0x24: [mem 0xc1218000-0xc12187ff]
[    0.098053] pci 0000:00:1f.2: PME# supported from D3hot
[    0.098361] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.098377] pci 0000:00:1f.3: reg 0x10: [mem 0xc121a000-0xc121a0ff 64bit]
[    0.098396] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.098767] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.098840] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.098870] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.098897] pci 0000:02:00.0: reg 0x18: [mem 0xc1104000-0xc1104fff 64bit]
[    0.098915] pci 0000:02:00.0: reg 0x20: [mem 0xc1100000-0xc1103fff 64bit]
[    0.099015] pci 0000:02:00.0: supports D1 D2
[    0.099017] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.108026] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.108030] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.108033] pci 0000:00:1c.2:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.108361] pci 0000:03:00.0: [8086:08b4] type 00 class 0x028000
[    0.108471] pci 0000:03:00.0: reg 0x10: [mem 0xc1000000-0xc1001fff 64bit]
[    0.108861] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.120167] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.120172] pci 0000:00:1c.3:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.121424] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.121498] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.121569] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.121640] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.121712] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.121782] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.121852] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.121923] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.122372] ACPI: EC: interrupt unblocked
[    0.122380] ACPI: EC: event unblocked
[    0.122387] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.122388] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.122597] SCSI subsystem initialized
[    0.122626] libata version 3.00 loaded.
[    0.122626] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.122626] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.122626] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.122626] vgaarb: loaded
[    0.122626] ACPI: bus type USB registered
[    0.122626] usbcore: registered new interface driver usbfs
[    0.122626] usbcore: registered new interface driver hub
[    0.122626] usbcore: registered new device driver usb
[    0.122626] EDAC MC: Ver: 3.0.0
[    0.122626] Registered efivars operations
[    0.149280] PCI: Using ACPI for IRQ routing
[    0.154663] PCI: pci_cache_line_size set to 64 bytes
[    0.154979] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.154981] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.154982] e820: reserve RAM buffer [mem 0x96f7a000-0x97ffffff]
[    0.154983] e820: reserve RAM buffer [mem 0x9c48f000-0x9fffffff]
[    0.154984] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.154985] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[    0.155078] NetLabel: Initializing
[    0.155078] NetLabel:  domain hash size = 128
[    0.155079] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.155092] NetLabel:  unlabeled traffic allowed by default
[    0.156306] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.156312] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.157017] clocksource: Switched to clocksource hpet
[    0.166425] VFS: Disk quotas dquot_6.6.0
[    0.166439] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.166531] AppArmor: AppArmor Filesystem Enabled
[    0.166558] pnp: PnP ACPI init
[    0.167329] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.167331] system 00:00: [io  0xffff] has been reserved
[    0.167333] system 00:00: [io  0xffff] has been reserved
[    0.167334] system 00:00: [io  0xffff] has been reserved
[    0.167336] system 00:00: [io  0x1800-0x18fe] could not be reserved
[    0.167338] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.167343] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.167396] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.167442] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.167446] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.167512] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.167566] pnp 00:04: Plug and Play ACPI device, IDs ETD0624 ETD0000 PNP0f13 (active)
[    0.167986] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.167988] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.167989] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.167991] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.167993] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.167994] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.167996] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.167998] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.167999] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.168012] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.168014] system 00:05: [mem 0xa0010000-0xa001ffff] has been reserved
[    0.168015] system 00:05: [mem 0xa0000000-0xa000ffff] has been reserved
[    0.168019] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.168367] pnp: PnP ACPI: found 6 devices
[    0.174295] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.174306] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.174309] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.174311] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.174327] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
[    0.174330] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.174333] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.174335] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.174339] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.174343] pci 0000:00:1c.0:   bridge window [mem 0xa0100000-0xa02fffff]
[    0.174346] pci 0000:00:1c.0:   bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.174351] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.174353] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.174356] pci 0000:00:1c.2:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.174363] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.174367] pci 0000:00:1c.3:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.174374] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.174375] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.174377] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.174378] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window]
[    0.174380] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.174381] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
[    0.174383] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.174384] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.174386] pci_bus 0000:02: resource 1 [mem 0xc1100000-0xc11fffff]
[    0.174387] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc10fffff]
[    0.174522] NET: Registered protocol family 2
[    0.174712] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.174822] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.174976] TCP: Hash tables configured (established 65536 bind 65536)
[    0.175010] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.175034] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.175086] NET: Registered protocol family 1
[    0.175098] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.175193] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.175194] pci 0000:00:14.0: PCI INT A: no GSI
[    0.196270] PCI: CLS 64 bytes, default 64
[    0.196310] Unpacking initramfs...
[    1.027086] Freeing initrd memory: 54196K
[    1.027124] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
[    1.027129] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
[    1.027144] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.027146] software IO TLB [mem 0x8f84e000-0x9384e000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    1.027347] Scanning for low memory corruption every 60 seconds
[    1.027942] Initialise system trusted keyrings
[    1.027952] Key type blacklist registered
[    1.027983] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.029075] zbud: loaded
[    1.029543] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.029656] fuse init (API version 7.26)
[    1.030854] Key type asymmetric registered
[    1.030855] Asymmetric key parser 'x509' registered
[    1.030893] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.030922] io scheduler noop registered
[    1.030922] io scheduler deadline registered
[    1.030961] io scheduler cfq registered (default)
[    1.031623] pcieport 0000:00:1c.0: Signaling PME with IRQ 42
[    1.031638] pcieport 0000:00:1c.2: Signaling PME with IRQ 43
[    1.031652] pcieport 0000:00:1c.3: Signaling PME with IRQ 44
[    1.031669] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.031741] efifb: probing for efifb
[    1.031751] efifb: framebuffer at 0xb0000000, using 5632k, total 5632k
[    1.031752] efifb: mode is 1600x900x32, linelength=6400, pages=1
[    1.031752] efifb: scrolling: redraw
[    1.031754] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.031845] Console: switching to colour frame buffer device 200x56
[    1.031865] fb0: EFI VGA frame buffer device
[    1.031872] intel_idle: MWAIT substates: 0x11142120
[    1.031873] intel_idle: v0.4.1 model 0x3D
[    1.032051] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.032600] ACPI: AC Adapter [ADP0] (on-line)
[    1.032666] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.032684] ACPI: Lid Switch [LID0]
[    1.032716] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.032731] ACPI: Power Button [PWRB]
[    1.032759] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.032773] ACPI: Power Button [PWRF]
[    1.033199] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.035366] Linux agpgart interface v0.103
[    1.036761] loop: module loaded
[    1.036912] libphy: Fixed MDIO Bus: probed
[    1.036913] tun: Universal TUN/TAP device driver, 1.6
[    1.036950] PPP generic driver version 2.4.2
[    1.036992] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.036994] ehci-pci: EHCI PCI platform driver
[    1.037115] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.037120] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.037130] ehci-pci 0000:00:1d.0: debug port 2
[    1.041017] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.041029] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1219000
[    1.056065] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.056118] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.056120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.056122] usb usb1: Product: EHCI Host Controller
[    1.056125] usb usb1: Manufacturer: Linux 4.15.0-33-generic ehci_hcd
[    1.056126] usb usb1: SerialNumber: 0000:00:1d.0
[    1.056329] hub 1-0:1.0: USB hub found
[    1.056334] hub 1-0:1.0: 2 ports detected
[    1.056485] ehci-platform: EHCI generic platform driver
[    1.056499] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.056503] ohci-pci: OHCI PCI platform driver
[    1.056511] ohci-platform: OHCI generic platform driver
[    1.056516] uhci_hcd: USB Universal Host Controller Interface driver
[    1.056643] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.056644] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.056664] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.056669] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.057731] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[    1.057735] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.057849] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.057851] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.057852] usb usb2: Product: xHCI Host Controller
[    1.057853] usb usb2: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
[    1.057854] usb usb2: SerialNumber: 0000:00:14.0
[    1.058026] hub 2-0:1.0: USB hub found
[    1.058037] hub 2-0:1.0: 11 ports detected
[    1.062344] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.062348] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.062352] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.062378] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.062379] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.062381] usb usb3: Product: xHCI Host Controller
[    1.062382] usb usb3: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
[    1.062383] usb usb3: SerialNumber: 0000:00:14.0
[    1.062555] hub 3-0:1.0: USB hub found
[    1.062562] hub 3-0:1.0: 4 ports detected
[    1.064296] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.078972] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.078976] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.079204] mousedev: PS/2 mouse device common for all mice
[    1.079603] rtc_cmos 00:01: RTC can wake from S4
[    1.079613] rtc_cmos: probe of 00:01 failed with error -16
[    1.079627] i2c /dev entries driver
[    1.079671] device-mapper: uevent: version 1.0.3
[    1.079732] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.079741] intel_pstate: Intel P-state driver initializing
[    1.079870] ledtrig-cpu: registered to indicate activity on CPUs
[    1.079872] EFI Variables Facility v0.08 2004-May-17
[    1.094122] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.105721] NET: Registered protocol family 10
[    1.108544] Segment Routing with IPv6
[    1.108570] NET: Registered protocol family 17
[    1.108610] Key type dns_resolver registered
[    1.108913] RAS: Correctable Errors collector initialized.
[    1.108941] microcode: sig=0x306d4, pf=0x40, revision=0x2b
[    1.108985] microcode: Microcode Update Driver: v2.2.
[    1.108992] sched_clock: Marking stable (1108980892, 0)->(1090804108, 18176784)
[    1.109154] registered taskstats version 1
[    1.109160] Loading compiled-in X.509 certificates
[    1.111164] Loaded X.509 cert 'Build time autogenerated kernel key: b2b2adbda3eef7b219e699c1b87c022096150517'
[    1.112988] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[    1.113008] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[    1.113017] Loaded UEFI:db cert 'Mocca: eee4ae78c24bf4a5488b6b77c611edde' linked to secondary sys keyring
[    1.115135] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[    1.115781] zswap: loaded using pool lzo/zbud
[    1.118362] Key type big_key registered
[    1.118365] Key type trusted registered
[    1.119498] Key type encrypted registered
[    1.119500] AppArmor: AppArmor sha1 policy hashing enabled
[    1.119502] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.119517] evm: HMAC attrs: 0x1
[    1.119991]   Magic number: 14:736:589
[    1.120073] hctosys: unable to open rtc device (rtc0)
[    1.120133] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.120133] EDD information not available.
[    1.132892] ACPI: Battery Slot [BAT0] (battery present)
[    1.396023] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.400023] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[    1.453231] Freeing unused kernel memory: 2408K
[    1.480053] Write protecting the kernel read-only data: 20480k
[    1.481174] Freeing unused kernel memory: 2008K
[    1.484495] Freeing unused kernel memory: 1900K
[    1.489468] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.489468] x86/mm: Checking user space page tables
[    1.494548] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.552309] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
[    1.552312] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.552465] hub 1-1:1.0: USB hub found
[    1.552553] hub 1-1:1.0: 8 ports detected
[    1.554021] usb 2-3: New USB device found, idVendor=046d, idProduct=c52f
[    1.554024] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.554025] usb 2-3: Product: USB Receiver
[    1.554027] usb 2-3: Manufacturer: Logitech
[    1.568797] ahci 0000:00:1f.2: version 3.0
[    1.568972] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.568980] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.579105] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[    1.579109] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.580005] scsi host0: ahci
[    1.584554] scsi host1: ahci
[    1.584643] scsi host2: ahci
[    1.585281] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x        (ptrval), 68:f7:28:ee:44:2e, XID 10900800 IRQ 47
[    1.585283] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.585391] scsi host3: ahci
[    1.585426] ata1: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218100 irq 46
[    1.585427] ata2: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218180 irq 46
[    1.585428] ata3: DUMMY
[    1.585428] ata4: DUMMY
[    1.593112] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.609227] [drm] Memory usable by graphics device = 4096M
[    1.609230] checking generic (b0000000 580000) vs hw (b0000000 10000000)
[    1.609230] fb: switching to inteldrmfb from EFI VGA
[    1.609250] Console: switching to colour dummy device 80x25
[    1.609371] [drm] Replacing VGA console driver
[    1.615343] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.615343] [drm] Driver supports precise vblank timestamp query.
[    1.617460] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.623527] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    1.625264] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.625585] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.659308] fbcon: inteldrmfb (fb0) is primary device
[    1.659354] Console: switching to colour frame buffer device 200x56
[    1.659376] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.680048] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[    1.828347] usb 2-4: New USB device found, idVendor=0bda, idProduct=0129
[    1.828349] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.828351] usb 2-4: Product: USB2.0-CRW
[    1.828352] usb 2-4: Manufacturer: Generic
[    1.828353] usb 2-4: SerialNumber: 20100201396000000
[    1.899253] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.899270] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.899970] ata1.00: ATA-9: WDC WD5000LPVX-00V0TT0, 01.01A01, max UDMA/133
[    1.899972] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.900737] ata1.00: configured for UDMA/133
[    1.900965] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-0 1A01 PQ: 0 ANSI: 5
[    1.901285] ata2.00: ATAPI: HL-DT-ST DVDRAM GUC0N, T.02, max UDMA/133
[    1.901305] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.901340] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.901343] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.901360] sd 0:0:0:0: [sda] Write Protect is off
[    1.901362] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.901394] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.902576] ata2.00: configured for UDMA/133
[    1.905455] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUC0N     T.02 PQ: 0 ANSI: 5
[    1.938232] random: fast init done
[    1.955989] usb 2-6: new high-speed USB device number 4 using xhci_hcd
[    1.968470] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.968472] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.968556] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.968569] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.968578] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.968639] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.968724] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.993173]  sda: sda1 sda2 sda3 sda4 sda5
[    1.993852] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.047989] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[    2.047997] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c360c9e, max_idle_ns: 440795302742 ns
[    2.142938] usb 2-6: New USB device found, idVendor=0bda, idProduct=579a
[    2.142940] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.142941] usb 2-6: Product: Lenovo EasyCamera
[    2.142943] usb 2-6: Manufacturer: J58F5583G
[    2.142944] usb 2-6: SerialNumber: 200901010001
[    2.211165] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03)
[    2.225850] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a.
[    2.240529] psmouse serio1: elantech: Elan sample query result 05, 20, 97
[    2.272012] usb 2-7: new full-speed USB device number 5 using xhci_hcd
[    2.326345] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[    2.421140] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
[    2.421142] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.425864] hidraw: raw HID events driver (C) Jiri Kosina
[    2.426875] usbcore: registered new interface driver rtsx_usb
[    2.429241] usbcore: registered new interface driver usbhid
[    2.429242] usbhid: USB HID core driver
[    2.431018] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:046D:C52F.0001/input/input7
[    2.432045] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[    2.432183] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52F.0002/input/input8
[    2.492288] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[    3.072140] clocksource: Switched to clocksource tsc
[    3.075002] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    4.167675] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.247301] random: crng init done
[    4.247303] random: 7 urandom warning(s) missed due to ratelimiting
[    4.304221] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    4.324108] systemd[1]: Detected architecture x86-64.
[    4.340034] systemd[1]: Set hostname to <B70-80>.
[    6.413455] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.413513] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.413524] systemd[1]: Reached target Remote File Systems.
[    6.413656] systemd[1]: Created slice System Slice.
[    6.413710] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.413742] systemd[1]: Listening on udev Kernel Socket.
[    6.413787] systemd[1]: Listening on udev Control Socket.
[    6.774740] lp: driver loaded but no devices found
[    6.822711] ppdev: user-space parallel port driver
[    6.865447] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[    8.077087] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
[    8.139362] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.223323] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    8.223325] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    8.223325] RAPL PMU: hw unit of domain package 2^-14 Joules
[    8.223326] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    8.223326] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    8.443436] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    8.443766] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    8.695301] Intel(R) Wireless WiFi driver for Linux
[    8.695302] Copyright(c) 2003- 2015 Intel Corporation
[    9.102946] AVX2 version of gcm_enc/dec engaged.
[    9.102947] AES CTR mode by8 optimization enabled
[    9.306803] iwlwifi 0000:03:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
[    9.403231] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[    9.425570] iwlwifi 0000:03:00.0: base HW address: e4:f8:9c:13:f4:6b
[    9.589925] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    9.682731] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   10.318719] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   10.470959] Bluetooth: Core ver 2.22
[   10.470982] NET: Registered protocol family 31
[   10.470983] Bluetooth: HCI device and connection manager initialized
[   10.470987] Bluetooth: HCI socket layer initialized
[   10.470989] Bluetooth: L2CAP socket layer initialized
[   10.470999] Bluetooth: SCO socket layer initialized
[   10.491080] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[   10.491140] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[   10.491194] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[   10.491255] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[   10.491292] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[   10.652311] usbcore: registered new interface driver btusb
[   10.664761] Bluetooth: hci0: read Intel version: 3707100100012d0d00
[   10.726586] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
[   10.748834] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[   10.749122] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   10.749124] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.749127] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   10.749128] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
[   10.749129] snd_hda_codec_conexant hdaudioC1D0:    inputs:
[   10.749131] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
[   10.749133] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
[   10.749891] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
[   10.752272] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[   10.752336] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[   10.851736] Bluetooth: hci0: Intel firmware patch completed and activated
[   10.895691] intel_rapl: Found RAPL domain package
[   10.895692] intel_rapl: Found RAPL domain core
[   10.895693] intel_rapl: Found RAPL domain uncore
[   10.895694] intel_rapl: Found RAPL domain dram
[   10.895696] intel_rapl: RAPL package 0 domain package locked by BIOS
[   10.895700] intel_rapl: RAPL package 0 domain dram locked by BIOS
[   11.587264] media: Linux media interface: v0.10
[   11.609960] Linux video capture interface: v2.00
[   11.773194] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:579a)
[   11.776074] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[   11.776077] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
[   11.776079] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
[   11.776183] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input17
[   11.776266] usbcore: registered new interface driver uvcvideo
[   11.776267] USB Video Class driver (1.1.1)
[   13.852023] Adding 8788988k swap on /dev/sda2.  Priority:-2 extents:1 across:8788988k FS
[   15.240965] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   15.532582] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   16.922053] systemd-journald[275]: Received request to flush runtime journal from PID 1
[   23.323304] audit: type=1400 audit(1535470435.316:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=748 comm="apparmor_parser"
[   23.323308] audit: type=1400 audit(1535470435.316:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=748 comm="apparmor_parser"
[   23.323310] audit: type=1400 audit(1535470435.316:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=748 comm="apparmor_parser"
[   23.324545] audit: type=1400 audit(1535470435.320:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=745 comm="apparmor_parser"
[   23.324549] audit: type=1400 audit(1535470435.320:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=745 comm="apparmor_parser"
[   23.324551] audit: type=1400 audit(1535470435.320:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=745 comm="apparmor_parser"
[   23.324554] audit: type=1400 audit(1535470435.320:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=745 comm="apparmor_parser"
[   23.324695] audit: type=1400 audit(1535470435.320:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=750 comm="apparmor_parser"
[   23.325180] audit: type=1400 audit(1535470435.320:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=749 comm="apparmor_parser"
[   23.325793] audit: type=1400 audit(1535470435.320:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=752 comm="apparmor_parser"
[   33.773472] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   33.773473] Bluetooth: BNEP filters: protocol multicast
[   33.773476] Bluetooth: BNEP socket layer initialized
[   36.759387] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   36.897947] r8169 0000:02:00.0 enp2s0: link down
[   36.898117] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   37.034877] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   37.193606] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   37.257567] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   40.536166] wlp3s0: authenticate with a0:64:8f:38:b2:c9
[   40.543267] wlp3s0: send auth to a0:64:8f:38:b2:c9 (try 1/3)
[   40.544742] wlp3s0: authenticated
[   40.551998] wlp3s0: associate with a0:64:8f:38:b2:c9 (try 1/3)
[   40.553159] wlp3s0: RX AssocResp from a0:64:8f:38:b2:c9 (capab=0x11 status=0 aid=6)
[   40.563331] wlp3s0: associated
[   40.577228] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by a0:64:8f:38:b2:c9
[   40.577762] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   42.641548] Bluetooth: RFCOMM TTY layer initialized
[   42.641552] Bluetooth: RFCOMM socket layer initialized
[   42.641556] Bluetooth: RFCOMM ver 1.11
[   46.259917] rfkill: input handler disabled

fabrice@B70-80:~$ dmesg -lerr
[    1.027124] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
[    1.027129] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
fabrice@B70-80:~$ dmesg -lwarn
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.029246] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.029247] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.040000]  #2 #3
[    0.175193] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.175194] pci 0000:00:14.0: PCI INT A: no GSI
[    1.056643] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.056644] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.079613] rtc_cmos: probe of 00:01 failed with error -16
[    1.568980] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   11.776074] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[   11.776077] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
[   11.776079] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!

fdisk -l

Disque /dev/loop0 : 86.9 MiB, 91099136 octets, 177928 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/loop1 : 3.7 MiB, 3887104 octets, 7592 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/loop2 : 2.3 MiB, 2433024 octets, 4752 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/loop3 : 140.9 MiB, 147722240 octets, 288520 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/loop4 : 13 MiB, 13619200 octets, 26600 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/loop5 : 14.5 MiB, 15196160 octets, 29680 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/loop6 : 34.7 MiB, 36323328 octets, 70944 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/sda : 465.8 GiB, 500107862016 octets, 976773168 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Type d'étiquette de disque : gpt
Identifiant de disque : B424035F-29C4-4A01-8578-132FCF43539C

Périphérique     Début       Fin  Secteurs Taille Type
/dev/sda1         2048   2164735   2162688     1G Système EFI
/dev/sda2      2164736  19742719  17577984   8.4G Partition d'échange Linux
/dev/sda3     19742720 175992831 156250112  74.5G Système de fichiers Linux
/dev/sda4    175992832 195524607  19531776   9.3G Système de fichiers Linux
/dev/sda5    195524608 976771071 781246464 372.5G Système de fichiers Linux

donc il y toujours quelque erreur mais je pense qu'il a eu un problème avec l'install 18.04 car avec l'install 18.04.1 C'est mieux

f.vuilliomenet · Le 28/08/2018, à 18:03

fabrice@B70-80:~$ systemd-analyze
Startup finished in 4.008s (firmware) + 11.281s (loader) + 3.805s (kernel) + 58.870s (userspace) = 1min 17.966s
graphical.target reached after 56.234s in userspace

fabrice@B70-80:~$ systemd-analyze blame
         27.436s plymouth-start.service
         22.119s plymouth-quit-wait.service
         18.942s plymouth-read-write.service
          7.659s apparmor.service
          6.642s dev-sda3.device
          6.493s NetworkManager-wait-online.service
          6.088s systemd-journal-flush.service
          5.542s dns-clean.service
          4.801s dev-loop3.device
          4.789s dev-loop6.device
          4.616s dev-loop1.device
          3.868s snapd.service
          2.938s networkd-dispatcher.service
          2.724s NetworkManager.service
          2.633s tlp.service
          2.468s udisks2.service
          2.344s ModemManager.service
          2.331s accounts-daemon.service
          2.058s gpu-manager.service
          1.827s systemd-fsck@dev-disk-by\x2duuid-ac446bdf\x2d071a\x2d4aa6\x2db5
          1.725s thermald.service
          1.677s systemd-fsck@dev-disk-by\x2duuid-ffe3c2fd\x2de560\x2d46a3\x2d89
          1.548s systemd-fsck@dev-disk-by\x2duuid-E256\x2d2EC8.service
          1.519s polkit.service
          1.186s grub-common.service
           965ms keyboard-setup.service
           953ms systemd-modules-load.service
           933ms avahi-daemon.service
           895ms fwupd.service
           882ms wpa_supplicant.service
           816ms console-setup.service
           811ms dev-loop2.device
           803ms snap-core-4917.mount
           790ms snap-gnome\x2dcalculator-180.mount
           731ms packagekit.service
           724ms snap-gtk\x2dcommon\x2dthemes-319.mount
           691ms snap-gnome\x2dsystem\x2dmonitor-51.mount
           680ms snap-gnome\x2d3\x2d26\x2d1604-70.mount
           669ms snap-gnome\x2dlogs-37.mount
           641ms systemd-backlight@backlight:intel_backlight.service
           641ms alsa-restore.service
           641ms snap-gnome\x2dcharacters-103.mount
           641ms systemd-random-seed.service
           636ms apport.service
           594ms dev-hugepages.mount
           583ms gdm.service
           574ms dev-mqueue.mount
           551ms systemd-remount-fs.service
           529ms sys-kernel-debug.mount
           509ms systemd-sysctl.service
           441ms systemd-tmpfiles-setup-dev.service
           423ms boot-efi.mount
           382ms home.mount
           368ms systemd-journald.service
           352ms rsyslog.service
           329ms systemd-udevd.service
           317ms user@1000.service
           298ms var.mount
           293ms colord.service
           291ms upower.service
           230ms kmod-static-nodes.service
           220ms setvtrgb.service
           215ms systemd-update-utmp.service
           201ms systemd-tmpfiles-setup.service
           198ms systemd-logind.service
           194ms systemd-resolved.service
           192ms systemd-timesyncd.service
           186ms systemd-udev-trigger.service
           161ms pppd-dns.service
           130ms ufw.service
           109ms dev-disk-by\x2duuid-3468efa5\x2dc2b8\x2d46a1\x2db3bf\x2d40faf8a
            98ms bolt.service
            74ms snapd.seeded.service
            65ms systemd-tmpfiles-clean.service
            58ms networking.service
            34ms dev-loop0.device
            30ms bluetooth.service
            12ms speech-dispatcher.service
             8ms kerneloops.service
             5ms ureadahead-stop.service
             5ms systemd-update-utmp-runlevel.service
             5ms dev-loop4.device
             5ms sys-fs-fuse-connections.mount
             4ms dev-loop5.device
             4ms systemd-user-sessions.service
             3ms rtkit-daemon.service
             3ms sys-kernel-config.mount
           557us snapd.socket

f.vuilliomenet · Le 28/08/2018, à 18:05

fabrice@B70-80:~$ cat /var/log/kern.log
Aug 28 17:46:54 B70-80 kernel: [  801.937814] rfkill: input handler enabled
Aug 28 17:47:50 B70-80 kernel: [    0.000000] microcode: microcode updated early to revision 0x2b, date = 2018-03-22
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Linux version 4.15.0-33-generic (buildd@lcy01-amd64-024) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #36-Ubuntu SMP Wed Aug 15 16:00:05 UTC 2018 (Ubuntu 4.15.0-33.36-generic 4.15.18)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=UUID=0622aaec-ac6d-4d65-b7af-510a467492fc ro quiet splash vt.handoff=1
Aug 28 17:47:50 B70-80 kernel: [    0.000000] KERNEL supported cpus:
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   Intel GenuineIntel
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   AMD AuthenticAMD
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   Centaur CentaurHauls
Aug 28 17:47:50 B70-80 kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
Aug 28 17:47:50 B70-80 kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
Aug 28 17:47:50 B70-80 kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
Aug 28 17:47:50 B70-80 kernel: [    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
Aug 28 17:47:50 B70-80 kernel: [    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
Aug 28 17:47:50 B70-80 kernel: [    0.000000] e820: BIOS-provided physical RAM map:
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000087fff] usable
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] reserved
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096f79fff] usable
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x0000000096f7a000-0x0000000097879fff] reserved
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x000000009787a000-0x000000009c48efff] usable
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x000000009c48f000-0x000000009c68efff] type 20
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x000000009c68f000-0x000000009ce7efff] reserved
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
Aug 28 17:47:50 B70-80 kernel: [    0.000000] NX (Execute Disable) protection: active
Aug 28 17:47:50 B70-80 kernel: [    0.000000] efi: EFI v2.40 by INSYDE Corp.
Aug 28 17:47:50 B70-80 kernel: [    0.000000] efi:  SMBIOS=0x9c708000  ACPI 2.0=0x9cffe014 
Aug 28 17:47:50 B70-80 kernel: [    0.000000] secureboot: Secure boot could not be determined (mode 0)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] SMBIOS 2.7 present.
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMI: LENOVO 80MR/Lenovo B70-80, BIOS D1CN06WW 05/18/2015
Aug 28 17:47:50 B70-80 kernel: [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Aug 28 17:47:50 B70-80 kernel: [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
Aug 28 17:47:50 B70-80 kernel: [    0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
Aug 28 17:47:50 B70-80 kernel: [    0.000000] MTRR default type: uncachable
Aug 28 17:47:50 B70-80 kernel: [    0.000000] MTRR fixed ranges enabled:
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   00000-9FFFF write-back
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   A0000-BFFFF uncachable
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   C0000-E7FFF write-protect
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   E8000-EFFFF write-combining
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   F0000-FFFFF write-protect
Aug 28 17:47:50 B70-80 kernel: [    0.000000] MTRR variable ranges enabled:
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   0 base 0000000000 mask 7C00000000 write-back
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   1 base 009D000000 mask 7FFF000000 uncachable
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   2 base 009E000000 mask 7FFE000000 uncachable
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   3 base 00A0000000 mask 7FE0000000 uncachable
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   4 base 00C0000000 mask 7FC0000000 uncachable
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   5 disabled
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   6 disabled
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   7 disabled
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   8 disabled
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   9 disabled
Aug 28 17:47:50 B70-80 kernel: [    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
Aug 28 17:47:50 B70-80 kernel: [    0.000000] total RAM covered: 14800M
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Found optimal setting for mtrr clean up
Aug 28 17:47:50 B70-80 kernel: [    0.000000]  gran_size: 64K 	chunk_size: 64M num_reg: 6  	lose cover RAM: 0G
Aug 28 17:47:50 B70-80 kernel: [    0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
Aug 28 17:47:50 B70-80 kernel: [    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Scanning 1 areas for low memory corruption
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Base memory trampoline at [        (ptrval)] 2e000 size 24576
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Using GB pages for direct mapping
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BRK [0x18c53f000, 0x18c53ffff] PGTABLE
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BRK [0x18c540000, 0x18c540fff] PGTABLE
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BRK [0x18c541000, 0x18c541fff] PGTABLE
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BRK [0x18c542000, 0x18c542fff] PGTABLE
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BRK [0x18c543000, 0x18c543fff] PGTABLE
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BRK [0x18c544000, 0x18c544fff] PGTABLE
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BRK [0x18c545000, 0x18c545fff] PGTABLE
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BRK [0x18c546000, 0x18c546fff] PGTABLE
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BRK [0x18c547000, 0x18c547fff] PGTABLE
Aug 28 17:47:50 B70-80 kernel: [    0.000000] BRK [0x18c548000, 0x18c548fff] PGTABLE
Aug 28 17:47:50 B70-80 kernel: [    0.000000] RAMDISK: [mem 0x31615000-0x34b01fff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: Early table checksum verification disabled
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 LENOVO)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: XSDT 0x000000009CFD0188 0000D4 (v01 LENOVO CB-01    00000001      01000013)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: FACP 0x000000009CFF6000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: DSDT 0x000000009CFE0000 00FE6F (v02 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: FACS 0x000000009CF7A000 000040
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: ASF! 0x000000009CFFA000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: BOOT 0x000000009CFF8000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: LPIT 0x000000009CFF4000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: MCFG 0x000000009CFF2000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: WDAT 0x000000009CFF0000 000224 (v01 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: SSDT 0x000000009CFDC000 00340B (v01 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: SSDT 0x000000009CFDB000 000539 (v02 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: SSDT 0x000000009CFD4000 005C31 (v02 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: MSDM 0x000000009CFFB000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: DBGP 0x000000009CFF7000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: APIC 0x000000009CFF3000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: SSDT 0x000000009CFDA000 000B74 (v02 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: ASPT 0x000000009CFF9000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: SLIC 0x000000009CFF1000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: HPET 0x000000009CFF5000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: DMAR 0x000000009CFD3000 0000F8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: CSRT 0x000000009CFD2000 0000C4 (v01 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: FPDT 0x000000009CFD1000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: BGRT 0x000000009CFCF000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Aug 28 17:47:50 B70-80 kernel: [    0.000000] No NUMA configuration found
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] NODE_DATA(0) allocated [mem 0x25efd5000-0x25effffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] tsc: Fast TSC calibration using PIT
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Zone ranges:
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   Normal   [mem 0x0000000100000000-0x000000025effffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   Device   empty
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Movable zone start for each node
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Early memory node ranges
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000087fff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   node   0: [mem 0x0000000000100000-0x0000000096f79fff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   node   0: [mem 0x000000009787a000-0x000000009c48efff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   node   0: [mem 0x0000000100000000-0x000000025effffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] On node 0 totalpages: 2075414
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   DMA zone: 64 pages used for memmap
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   DMA zone: 1120 pages reserved
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   DMA zone: 3974 pages, LIFO batch:0
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   DMA32 zone: 9903 pages used for memmap
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   DMA32 zone: 633744 pages, LIFO batch:31
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   Normal zone: 22464 pages used for memmap
Aug 28 17:47:50 B70-80 kernel: [    0.000000]   Normal zone: 1437696 pages, LIFO batch:31
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Reserved but unavailable: 99 pages
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x1808
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Aug 28 17:47:50 B70-80 kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: IRQ0 used by override.
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: IRQ9 used by override.
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Aug 28 17:47:50 B70-80 kernel: [    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x0009ffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x96f7a000-0x97879fff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9c48f000-0x9c68efff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9c68f000-0x9ce7efff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9dffffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9fffffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
Aug 28 17:47:50 B70-80 kernel: [    0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Aug 28 17:47:50 B70-80 kernel: [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Aug 28 17:47:50 B70-80 kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
Aug 28 17:47:50 B70-80 kernel: [    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
Aug 28 17:47:50 B70-80 kernel: [    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
Aug 28 17:47:50 B70-80 kernel: [    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
Aug 28 17:47:50 B70-80 kernel: [    0.000000] pcpu-alloc: [0] 0 1 2 3 
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2041863
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Policy zone: Normal
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=UUID=0622aaec-ac6d-4d65-b7af-510a467492fc ro quiet splash vt.handoff=1
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Memory: 7960508K/8301656K available (12300K kernel code, 2470K rwdata, 4244K rodata, 2408K init, 2416K bss, 341148K reserved, 0K cma-reserved)
Aug 28 17:47:50 B70-80 kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Kernel/User page tables isolation: enabled
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ftrace: allocating 39121 entries in 153 pages
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Hierarchical RCU implementation.
Aug 28 17:47:50 B70-80 kernel: [    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Aug 28 17:47:50 B70-80 kernel: [    0.000000] 	Tasks RCU enabled.
Aug 28 17:47:50 B70-80 kernel: [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Aug 28 17:47:50 B70-80 kernel: [    0.000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
Aug 28 17:47:50 B70-80 kernel: [    0.000000] vt handoff: transparent VT on vt#1
Aug 28 17:47:50 B70-80 kernel: [    0.000000] Console: colour dummy device 80x25
Aug 28 17:47:50 B70-80 kernel: [    0.000000] console [tty0] enabled
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: Core revision 20170831
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
Aug 28 17:47:50 B70-80 kernel: [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
Aug 28 17:47:50 B70-80 kernel: [    0.000000] hpet clockevent registered
Aug 28 17:47:50 B70-80 kernel: [    0.000000] APIC: Switch to symmetric I/O mode setup
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMAR: Host address width 39
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMAR: RMRR base: 0x0000009ce24000 end: 0x0000009ce43fff
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMAR: ANDD device: 2 name: \_SB.PCI0.SDHC
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
Aug 28 17:47:50 B70-80 kernel: [    0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
Aug 28 17:47:50 B70-80 kernel: [    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
Aug 28 17:47:50 B70-80 kernel: [    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Aug 28 17:47:50 B70-80 kernel: [    0.020000] tsc: Fast TSC calibration using PIT
Aug 28 17:47:50 B70-80 kernel: [    0.024000] tsc: Detected 2394.342 MHz processor
Aug 28 17:47:50 B70-80 kernel: [    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.68 BogoMIPS (lpj=9577368)
Aug 28 17:47:50 B70-80 kernel: [    0.024000] pid_max: default: 32768 minimum: 301
Aug 28 17:47:50 B70-80 kernel: [    0.024000] Security Framework initialized
Aug 28 17:47:50 B70-80 kernel: [    0.024000] Yama: becoming mindful.
Aug 28 17:47:50 B70-80 kernel: [    0.024000] AppArmor: AppArmor initialized
Aug 28 17:47:50 B70-80 kernel: [    0.028185] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Aug 28 17:47:50 B70-80 kernel: [    0.028970] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Aug 28 17:47:50 B70-80 kernel: [    0.029007] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Aug 28 17:47:50 B70-80 kernel: [    0.029034] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Aug 28 17:47:50 B70-80 kernel: [    0.029240] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Aug 28 17:47:50 B70-80 kernel: [    0.029240] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
Aug 28 17:47:50 B70-80 kernel: [    0.029245] mce: CPU supports 7 MCE banks
Aug 28 17:47:50 B70-80 kernel: [    0.029261] process: using mwait in idle threads
Aug 28 17:47:50 B70-80 kernel: [    0.029263] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Aug 28 17:47:50 B70-80 kernel: [    0.029264] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Aug 28 17:47:50 B70-80 kernel: [    0.029266] Spectre V2 : Mitigation: Full generic retpoline
Aug 28 17:47:50 B70-80 kernel: [    0.029266] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Aug 28 17:47:50 B70-80 kernel: [    0.029267] Spectre V2 : Enabling Restricted Speculation for firmware calls
Aug 28 17:47:50 B70-80 kernel: [    0.029268] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Aug 28 17:47:50 B70-80 kernel: [    0.035531] Freeing SMP alternatives memory: 36K
Aug 28 17:47:50 B70-80 kernel: [    0.041659] TSC deadline timer enabled
Aug 28 17:47:50 B70-80 kernel: [    0.041661] smpboot: CPU0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (family: 0x6, model: 0x3d, stepping: 0x4)
Aug 28 17:47:50 B70-80 kernel: [    0.041722] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
Aug 28 17:47:50 B70-80 kernel: [    0.041765] ... version:                3
Aug 28 17:47:50 B70-80 kernel: [    0.041765] ... bit width:              48
Aug 28 17:47:50 B70-80 kernel: [    0.041766] ... generic registers:      4
Aug 28 17:47:50 B70-80 kernel: [    0.041767] ... value mask:             0000ffffffffffff
Aug 28 17:47:50 B70-80 kernel: [    0.041767] ... max period:             00007fffffffffff
Aug 28 17:47:50 B70-80 kernel: [    0.041768] ... fixed-purpose events:   3
Aug 28 17:47:50 B70-80 kernel: [    0.041768] ... event mask:             000000070000000f
Aug 28 17:47:50 B70-80 kernel: [    0.041799] Hierarchical SRCU implementation.
Aug 28 17:47:50 B70-80 kernel: [    0.042800] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Aug 28 17:47:50 B70-80 kernel: [    0.042813] smp: Bringing up secondary CPUs ...
Aug 28 17:47:50 B70-80 kernel: [    0.042884] x86: Booting SMP configuration:
Aug 28 17:47:50 B70-80 kernel: [    0.042885] .... node  #0, CPUs:      #1 #2 #3
Aug 28 17:47:50 B70-80 kernel: [    0.044492] smp: Brought up 1 node, 4 CPUs
Aug 28 17:47:50 B70-80 kernel: [    0.044492] smpboot: Max logical packages: 1
Aug 28 17:47:50 B70-80 kernel: [    0.044492] smpboot: Total of 4 processors activated (19154.73 BogoMIPS)
Aug 28 17:47:50 B70-80 kernel: [    0.048251] devtmpfs: initialized
Aug 28 17:47:50 B70-80 kernel: [    0.048251] x86/mm: Memory block size: 128MB
Aug 28 17:47:50 B70-80 kernel: [    0.048700] evm: security.selinux
Aug 28 17:47:50 B70-80 kernel: [    0.048700] evm: security.SMACK64
Aug 28 17:47:50 B70-80 kernel: [    0.048701] evm: security.SMACK64EXEC
Aug 28 17:47:50 B70-80 kernel: [    0.048701] evm: security.SMACK64TRANSMUTE
Aug 28 17:47:50 B70-80 kernel: [    0.048702] evm: security.SMACK64MMAP
Aug 28 17:47:50 B70-80 kernel: [    0.048702] evm: security.apparmor
Aug 28 17:47:50 B70-80 kernel: [    0.048703] evm: security.ima
Aug 28 17:47:50 B70-80 kernel: [    0.048704] evm: security.capability
Aug 28 17:47:50 B70-80 kernel: [    0.048717] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
Aug 28 17:47:50 B70-80 kernel: [    0.048717] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Aug 28 17:47:50 B70-80 kernel: [    0.048717] futex hash table entries: 1024 (order: 4, 65536 bytes)
Aug 28 17:47:50 B70-80 kernel: [    0.048717] pinctrl core: initialized pinctrl subsystem
Aug 28 17:47:50 B70-80 kernel: [    0.048717] RTC time: 15:47:15, date: 08/28/18
Aug 28 17:47:50 B70-80 kernel: [    0.048717] NET: Registered protocol family 16
Aug 28 17:47:50 B70-80 kernel: [    0.048717] audit: initializing netlink subsys (disabled)
Aug 28 17:47:50 B70-80 kernel: [    0.048717] audit: type=2000 audit(1535471235.048:1): state=initialized audit_enabled=0 res=1
Aug 28 17:47:50 B70-80 kernel: [    0.048717] cpuidle: using governor ladder
Aug 28 17:47:50 B70-80 kernel: [    0.048717] cpuidle: using governor menu
Aug 28 17:47:50 B70-80 kernel: [    0.048717] Simple Boot Flag at 0x44 set to 0x1
Aug 28 17:47:50 B70-80 kernel: [    0.048717] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Aug 28 17:47:50 B70-80 kernel: [    0.048717] ACPI: bus type PCI registered
Aug 28 17:47:50 B70-80 kernel: [    0.048717] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Aug 28 17:47:50 B70-80 kernel: [    0.048717] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Aug 28 17:47:50 B70-80 kernel: [    0.048717] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
Aug 28 17:47:50 B70-80 kernel: [    0.048717] PCI: Using configuration type 1 for base access
Aug 28 17:47:50 B70-80 kernel: [    0.049194] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
Aug 28 17:47:50 B70-80 kernel: [    0.049194] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
Aug 28 17:47:50 B70-80 kernel: [    0.049194] ACPI: Added _OSI(Module Device)
Aug 28 17:47:50 B70-80 kernel: [    0.049194] ACPI: Added _OSI(Processor Device)
Aug 28 17:47:50 B70-80 kernel: [    0.049194] ACPI: Added _OSI(3.0 _SCP Extensions)
Aug 28 17:47:50 B70-80 kernel: [    0.049194] ACPI: Added _OSI(Processor Aggregator Device)
Aug 28 17:47:50 B70-80 kernel: [    0.049194] ACPI: Added _OSI(Linux-Dell-Video)
Aug 28 17:47:50 B70-80 kernel: [    0.049194] ACPI: Executed 7 blocks of module-level executable AML code
Aug 28 17:47:50 B70-80 kernel: [    0.061871] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
Aug 28 17:47:50 B70-80 kernel: [    0.061871] ACPI: Dynamic OEM Table Load:
Aug 28 17:47:50 B70-80 kernel: [    0.061871] ACPI: SSDT 0xFFFF894C54949000 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20121220)
Aug 28 17:47:50 B70-80 kernel: [    0.064059] ACPI: Dynamic OEM Table Load:
Aug 28 17:47:50 B70-80 kernel: [    0.064068] ACPI: SSDT 0xFFFF894C54E82000 0005AA (v02 PmRef  ApIst    00003000 INTL 20121220)
Aug 28 17:47:50 B70-80 kernel: [    0.064646] ACPI: Dynamic OEM Table Load:
Aug 28 17:47:50 B70-80 kernel: [    0.064646] ACPI: SSDT 0xFFFF894C54909400 000119 (v02 PmRef  ApCst    00003000 INTL 20121220)
Aug 28 17:47:50 B70-80 kernel: [    0.065286] ACPI: EC: EC started
Aug 28 17:47:50 B70-80 kernel: [    0.065287] ACPI: EC: interrupt blocked
Aug 28 17:47:50 B70-80 kernel: [    0.066412] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
Aug 28 17:47:50 B70-80 kernel: [    0.066414] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
Aug 28 17:47:50 B70-80 kernel: [    0.066416] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
Aug 28 17:47:50 B70-80 kernel: [    0.066417] ACPI: Interpreter enabled
Aug 28 17:47:50 B70-80 kernel: [    0.066461] ACPI: (supports S0 S3 S4 S5)
Aug 28 17:47:50 B70-80 kernel: [    0.066462] ACPI: Using IOAPIC for interrupt routing
Aug 28 17:47:50 B70-80 kernel: [    0.066502] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Aug 28 17:47:50 B70-80 kernel: [    0.066935] ACPI: GPE 0x62 active on init
Aug 28 17:47:50 B70-80 kernel: [    0.066953] ACPI: Enabled 6 GPEs in block 00 to 7F
Aug 28 17:47:50 B70-80 kernel: [    0.088069] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
Aug 28 17:47:50 B70-80 kernel: [    0.088076] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Aug 28 17:47:50 B70-80 kernel: [    0.089333] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
Aug 28 17:47:50 B70-80 kernel: [    0.089334] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
Aug 28 17:47:50 B70-80 kernel: [    0.090462] PCI host bridge to bus 0000:00
Aug 28 17:47:50 B70-80 kernel: [    0.090464] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
Aug 28 17:47:50 B70-80 kernel: [    0.090466] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
Aug 28 17:47:50 B70-80 kernel: [    0.090467] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Aug 28 17:47:50 B70-80 kernel: [    0.090469] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
Aug 28 17:47:50 B70-80 kernel: [    0.090470] pci_bus 0000:00: root bus resource [bus 00-fe]
Aug 28 17:47:50 B70-80 kernel: [    0.090479] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
Aug 28 17:47:50 B70-80 kernel: [    0.090811] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
Aug 28 17:47:50 B70-80 kernel: [    0.090823] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
Aug 28 17:47:50 B70-80 kernel: [    0.090829] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
Aug 28 17:47:50 B70-80 kernel: [    0.090834] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
Aug 28 17:47:50 B70-80 kernel: [    0.090848] pci 0000:00:02.0: BAR 2: assigned to efifb
Aug 28 17:47:50 B70-80 kernel: [    0.091179] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
Aug 28 17:47:50 B70-80 kernel: [    0.091190] pci 0000:00:03.0: reg 0x10: [mem 0xc1210000-0xc1213fff 64bit]
Aug 28 17:47:50 B70-80 kernel: [    0.091545] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
Aug 28 17:47:50 B70-80 kernel: [    0.091564] pci 0000:00:14.0: reg 0x10: [mem 0xc1200000-0xc120ffff 64bit]
Aug 28 17:47:50 B70-80 kernel: [    0.091621] pci 0000:00:14.0: PME# supported from D3hot D3cold
Aug 28 17:47:50 B70-80 kernel: [    0.091936] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
Aug 28 17:47:50 B70-80 kernel: [    0.091958] pci 0000:00:16.0: reg 0x10: [mem 0xc121b000-0xc121b01f 64bit]
Aug 28 17:47:50 B70-80 kernel: [    0.092027] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Aug 28 17:47:50 B70-80 kernel: [    0.092342] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
Aug 28 17:47:50 B70-80 kernel: [    0.092361] pci 0000:00:1b.0: reg 0x10: [mem 0xc1214000-0xc1217fff 64bit]
Aug 28 17:47:50 B70-80 kernel: [    0.092418] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Aug 28 17:47:50 B70-80 kernel: [    0.092727] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
Aug 28 17:47:50 B70-80 kernel: [    0.092795] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Aug 28 17:47:50 B70-80 kernel: [    0.093167] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
Aug 28 17:47:50 B70-80 kernel: [    0.093238] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Aug 28 17:47:50 B70-80 kernel: [    0.093609] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
Aug 28 17:47:50 B70-80 kernel: [    0.093679] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Aug 28 17:47:50 B70-80 kernel: [    0.094055] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
Aug 28 17:47:50 B70-80 kernel: [    0.095262] pci 0000:00:1d.0: reg 0x10: [mem 0xc1219000-0xc12193ff]
Aug 28 17:47:50 B70-80 kernel: [    0.098712] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Aug 28 17:47:50 B70-80 kernel: [    0.099031] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
Aug 28 17:47:50 B70-80 kernel: [    0.099450] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
Aug 28 17:47:50 B70-80 kernel: [    0.099465] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
Aug 28 17:47:50 B70-80 kernel: [    0.099471] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
Aug 28 17:47:50 B70-80 kernel: [    0.099478] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
Aug 28 17:47:50 B70-80 kernel: [    0.099485] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
Aug 28 17:47:50 B70-80 kernel: [    0.099491] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
Aug 28 17:47:50 B70-80 kernel: [    0.099498] pci 0000:00:1f.2: reg 0x24: [mem 0xc1218000-0xc12187ff]
Aug 28 17:47:50 B70-80 kernel: [    0.099532] pci 0000:00:1f.2: PME# supported from D3hot
Aug 28 17:47:50 B70-80 kernel: [    0.099839] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
Aug 28 17:47:50 B70-80 kernel: [    0.099855] pci 0000:00:1f.3: reg 0x10: [mem 0xc121a000-0xc121a0ff 64bit]
Aug 28 17:47:50 B70-80 kernel: [    0.099874] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
Aug 28 17:47:50 B70-80 kernel: [    0.100248] pci 0000:00:1c.0: PCI bridge to [bus 01]
Aug 28 17:47:50 B70-80 kernel: [    0.100322] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
Aug 28 17:47:50 B70-80 kernel: [    0.100353] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
Aug 28 17:47:50 B70-80 kernel: [    0.100380] pci 0000:02:00.0: reg 0x18: [mem 0xc1104000-0xc1104fff 64bit]
Aug 28 17:47:50 B70-80 kernel: [    0.100397] pci 0000:02:00.0: reg 0x20: [mem 0xc1100000-0xc1103fff 64bit]
Aug 28 17:47:50 B70-80 kernel: [    0.100498] pci 0000:02:00.0: supports D1 D2
Aug 28 17:47:50 B70-80 kernel: [    0.100499] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Aug 28 17:47:50 B70-80 kernel: [    0.108039] pci 0000:00:1c.2: PCI bridge to [bus 02]
Aug 28 17:47:50 B70-80 kernel: [    0.108042] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
Aug 28 17:47:50 B70-80 kernel: [    0.108045] pci 0000:00:1c.2:   bridge window [mem 0xc1100000-0xc11fffff]
Aug 28 17:47:50 B70-80 kernel: [    0.108314] pci 0000:03:00.0: [8086:08b4] type 00 class 0x028000
Aug 28 17:47:50 B70-80 kernel: [    0.108423] pci 0000:03:00.0: reg 0x10: [mem 0xc1000000-0xc1001fff 64bit]
Aug 28 17:47:50 B70-80 kernel: [    0.108813] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
Aug 28 17:47:50 B70-80 kernel: [    0.124169] pci 0000:00:1c.3: PCI bridge to [bus 03]
Aug 28 17:47:50 B70-80 kernel: [    0.124173] pci 0000:00:1c.3:   bridge window [mem 0xc1000000-0xc10fffff]
Aug 28 17:47:50 B70-80 kernel: [    0.125549] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
Aug 28 17:47:50 B70-80 kernel: [    0.125630] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
Aug 28 17:47:50 B70-80 kernel: [    0.125709] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
Aug 28 17:47:50 B70-80 kernel: [    0.125788] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
Aug 28 17:47:50 B70-80 kernel: [    0.125866] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Aug 28 17:47:50 B70-80 kernel: [    0.125944] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Aug 28 17:47:50 B70-80 kernel: [    0.126022] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
Aug 28 17:47:50 B70-80 kernel: [    0.126100] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
Aug 28 17:47:50 B70-80 kernel: [    0.126569] ACPI: EC: interrupt unblocked
Aug 28 17:47:50 B70-80 kernel: [    0.126576] ACPI: EC: event unblocked
Aug 28 17:47:50 B70-80 kernel: [    0.126583] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
Aug 28 17:47:50 B70-80 kernel: [    0.126585] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
Aug 28 17:47:50 B70-80 kernel: [    0.126801] SCSI subsystem initialized
Aug 28 17:47:50 B70-80 kernel: [    0.126812] libata version 3.00 loaded.
Aug 28 17:47:50 B70-80 kernel: [    0.126812] pci 0000:00:02.0: vgaarb: setting as boot VGA device
Aug 28 17:47:50 B70-80 kernel: [    0.126812] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Aug 28 17:47:50 B70-80 kernel: [    0.126812] pci 0000:00:02.0: vgaarb: bridge control possible
Aug 28 17:47:50 B70-80 kernel: [    0.126812] vgaarb: loaded
Aug 28 17:47:50 B70-80 kernel: [    0.126812] ACPI: bus type USB registered
Aug 28 17:47:50 B70-80 kernel: [    0.126812] usbcore: registered new interface driver usbfs
Aug 28 17:47:50 B70-80 kernel: [    0.126812] usbcore: registered new interface driver hub
Aug 28 17:47:50 B70-80 kernel: [    0.126812] usbcore: registered new device driver usb
Aug 28 17:47:50 B70-80 kernel: [    0.126812] EDAC MC: Ver: 3.0.0
Aug 28 17:47:50 B70-80 kernel: [    0.126812] Registered efivars operations
Aug 28 17:47:50 B70-80 kernel: [    0.153669] PCI: Using ACPI for IRQ routing
Aug 28 17:47:50 B70-80 kernel: [    0.156077] PCI: pci_cache_line_size set to 64 bytes
Aug 28 17:47:50 B70-80 kernel: [    0.156396] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
Aug 28 17:47:50 B70-80 kernel: [    0.156397] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
Aug 28 17:47:50 B70-80 kernel: [    0.156398] e820: reserve RAM buffer [mem 0x96f7a000-0x97ffffff]
Aug 28 17:47:50 B70-80 kernel: [    0.156399] e820: reserve RAM buffer [mem 0x9c48f000-0x9fffffff]
Aug 28 17:47:50 B70-80 kernel: [    0.156400] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
Aug 28 17:47:50 B70-80 kernel: [    0.156401] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
Aug 28 17:47:50 B70-80 kernel: [    0.156497] NetLabel: Initializing
Aug 28 17:47:50 B70-80 kernel: [    0.156498] NetLabel:  domain hash size = 128
Aug 28 17:47:50 B70-80 kernel: [    0.156498] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
Aug 28 17:47:50 B70-80 kernel: [    0.156513] NetLabel:  unlabeled traffic allowed by default
Aug 28 17:47:50 B70-80 kernel: [    0.160306] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Aug 28 17:47:50 B70-80 kernel: [    0.160312] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Aug 28 17:47:50 B70-80 kernel: [    0.161017] clocksource: Switched to clocksource hpet
Aug 28 17:47:50 B70-80 kernel: [    0.170462] VFS: Disk quotas dquot_6.6.0
Aug 28 17:47:50 B70-80 kernel: [    0.170477] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Aug 28 17:47:50 B70-80 kernel: [    0.170577] AppArmor: AppArmor Filesystem Enabled
Aug 28 17:47:50 B70-80 kernel: [    0.170605] pnp: PnP ACPI init
Aug 28 17:47:50 B70-80 kernel: [    0.171303] system 00:00: [io  0x0680-0x069f] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171305] system 00:00: [io  0xffff] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171307] system 00:00: [io  0xffff] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171308] system 00:00: [io  0xffff] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171310] system 00:00: [io  0x1800-0x18fe] could not be reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171312] system 00:00: [io  0x164e-0x164f] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171317] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 28 17:47:50 B70-80 kernel: [    0.171375] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
Aug 28 17:47:50 B70-80 kernel: [    0.171423] system 00:02: [io  0x1854-0x1857] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171427] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Aug 28 17:47:50 B70-80 kernel: [    0.171491] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
Aug 28 17:47:50 B70-80 kernel: [    0.171547] pnp 00:04: Plug and Play ACPI device, IDs ETD0624 ETD0000 PNP0f13 (active)
Aug 28 17:47:50 B70-80 kernel: [    0.171973] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171975] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171977] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171978] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171980] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171982] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171984] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171985] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171987] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171989] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171990] system 00:05: [mem 0xa0010000-0xa001ffff] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171992] system 00:05: [mem 0xa0000000-0xa000ffff] has been reserved
Aug 28 17:47:50 B70-80 kernel: [    0.171996] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 28 17:47:50 B70-80 kernel: [    0.172357] pnp: PnP ACPI: found 6 devices
Aug 28 17:47:50 B70-80 kernel: [    0.178306] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Aug 28 17:47:50 B70-80 kernel: [    0.178318] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
Aug 28 17:47:50 B70-80 kernel: [    0.178320] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
Aug 28 17:47:50 B70-80 kernel: [    0.178322] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
Aug 28 17:47:50 B70-80 kernel: [    0.178339] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
Aug 28 17:47:50 B70-80 kernel: [    0.178342] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
Aug 28 17:47:50 B70-80 kernel: [    0.178345] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
Aug 28 17:47:50 B70-80 kernel: [    0.178347] pci 0000:00:1c.0: PCI bridge to [bus 01]
Aug 28 17:47:50 B70-80 kernel: [    0.178350] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
Aug 28 17:47:50 B70-80 kernel: [    0.178354] pci 0000:00:1c.0:   bridge window [mem 0xa0100000-0xa02fffff]
Aug 28 17:47:50 B70-80 kernel: [    0.178357] pci 0000:00:1c.0:   bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
Aug 28 17:47:50 B70-80 kernel: [    0.178361] pci 0000:00:1c.2: PCI bridge to [bus 02]
Aug 28 17:47:50 B70-80 kernel: [    0.178363] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
Aug 28 17:47:50 B70-80 kernel: [    0.178367] pci 0000:00:1c.2:   bridge window [mem 0xc1100000-0xc11fffff]
Aug 28 17:47:50 B70-80 kernel: [    0.178374] pci 0000:00:1c.3: PCI bridge to [bus 03]
Aug 28 17:47:50 B70-80 kernel: [    0.178378] pci 0000:00:1c.3:   bridge window [mem 0xc1000000-0xc10fffff]
Aug 28 17:47:50 B70-80 kernel: [    0.178385] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
Aug 28 17:47:50 B70-80 kernel: [    0.178387] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
Aug 28 17:47:50 B70-80 kernel: [    0.178388] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
Aug 28 17:47:50 B70-80 kernel: [    0.178390] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window]
Aug 28 17:47:50 B70-80 kernel: [    0.178391] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
Aug 28 17:47:50 B70-80 kernel: [    0.178393] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
Aug 28 17:47:50 B70-80 kernel: [    0.178394] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
Aug 28 17:47:50 B70-80 kernel: [    0.178396] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
Aug 28 17:47:50 B70-80 kernel: [    0.178397] pci_bus 0000:02: resource 1 [mem 0xc1100000-0xc11fffff]
Aug 28 17:47:50 B70-80 kernel: [    0.178399] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc10fffff]
Aug 28 17:47:50 B70-80 kernel: [    0.178538] NET: Registered protocol family 2
Aug 28 17:47:50 B70-80 kernel: [    0.178738] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
Aug 28 17:47:50 B70-80 kernel: [    0.178853] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Aug 28 17:47:50 B70-80 kernel: [    0.179026] TCP: Hash tables configured (established 65536 bind 65536)
Aug 28 17:47:50 B70-80 kernel: [    0.179061] UDP hash table entries: 4096 (order: 5, 131072 bytes)
Aug 28 17:47:50 B70-80 kernel: [    0.179088] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Aug 28 17:47:50 B70-80 kernel: [    0.179145] NET: Registered protocol family 1
Aug 28 17:47:50 B70-80 kernel: [    0.179159] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Aug 28 17:47:50 B70-80 kernel: [    0.179253] pci 0000:00:14.0: can't derive routing for PCI INT A
Aug 28 17:47:50 B70-80 kernel: [    0.179255] pci 0000:00:14.0: PCI INT A: no GSI
Aug 28 17:47:50 B70-80 kernel: [    0.200271] PCI: CLS 64 bytes, default 64
Aug 28 17:47:50 B70-80 kernel: [    0.200307] Unpacking initramfs...
Aug 28 17:47:50 B70-80 kernel: [    1.026554] Freeing initrd memory: 54196K
Aug 28 17:47:50 B70-80 kernel: [    1.026635] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
Aug 28 17:47:50 B70-80 kernel: [    1.026640] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
Aug 28 17:47:50 B70-80 kernel: [    1.026654] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Aug 28 17:47:50 B70-80 kernel: [    1.026657] software IO TLB [mem 0x8f84e000-0x9384e000] (64MB) mapped at [        (ptrval)-        (ptrval)]
Aug 28 17:47:50 B70-80 kernel: [    1.026847] Scanning for low memory corruption every 60 seconds
Aug 28 17:47:50 B70-80 kernel: [    1.027445] Initialise system trusted keyrings
Aug 28 17:47:50 B70-80 kernel: [    1.027452] Key type blacklist registered
Aug 28 17:47:50 B70-80 kernel: [    1.027476] workingset: timestamp_bits=36 max_order=21 bucket_order=0
Aug 28 17:47:50 B70-80 kernel: [    1.028553] zbud: loaded
Aug 28 17:47:50 B70-80 kernel: [    1.029017] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Aug 28 17:47:50 B70-80 kernel: [    1.029132] fuse init (API version 7.26)
Aug 28 17:47:50 B70-80 kernel: [    1.030200] Key type asymmetric registered
Aug 28 17:47:50 B70-80 kernel: [    1.030203] Asymmetric key parser 'x509' registered
Aug 28 17:47:50 B70-80 kernel: [    1.030238] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
Aug 28 17:47:50 B70-80 kernel: [    1.030268] io scheduler noop registered
Aug 28 17:47:50 B70-80 kernel: [    1.030269] io scheduler deadline registered
Aug 28 17:47:50 B70-80 kernel: [    1.030310] io scheduler cfq registered (default)
Aug 28 17:47:50 B70-80 kernel: [    1.030958] pcieport 0000:00:1c.0: Signaling PME with IRQ 42
Aug 28 17:47:50 B70-80 kernel: [    1.030975] pcieport 0000:00:1c.2: Signaling PME with IRQ 43
Aug 28 17:47:50 B70-80 kernel: [    1.030988] pcieport 0000:00:1c.3: Signaling PME with IRQ 44
Aug 28 17:47:50 B70-80 kernel: [    1.031006] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
Aug 28 17:47:50 B70-80 kernel: [    1.031072] efifb: probing for efifb
Aug 28 17:47:50 B70-80 kernel: [    1.031082] efifb: framebuffer at 0xb0000000, using 5632k, total 5632k
Aug 28 17:47:50 B70-80 kernel: [    1.031083] efifb: mode is 1600x900x32, linelength=6400, pages=1
Aug 28 17:47:50 B70-80 kernel: [    1.031083] efifb: scrolling: redraw
Aug 28 17:47:50 B70-80 kernel: [    1.031085] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Aug 28 17:47:50 B70-80 kernel: [    1.031170] Console: switching to colour frame buffer device 200x56
Aug 28 17:47:50 B70-80 kernel: [    1.031190] fb0: EFI VGA frame buffer device
Aug 28 17:47:50 B70-80 kernel: [    1.031198] intel_idle: MWAIT substates: 0x11142120
Aug 28 17:47:50 B70-80 kernel: [    1.031198] intel_idle: v0.4.1 model 0x3D
Aug 28 17:47:50 B70-80 kernel: [    1.031365] intel_idle: lapic_timer_reliable_states 0xffffffff
Aug 28 17:47:50 B70-80 kernel: [    1.031805] ACPI: AC Adapter [ADP0] (on-line)
Aug 28 17:47:50 B70-80 kernel: [    1.031860] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
Aug 28 17:47:50 B70-80 kernel: [    1.031879] ACPI: Lid Switch [LID0]
Aug 28 17:47:50 B70-80 kernel: [    1.031921] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
Aug 28 17:47:50 B70-80 kernel: [    1.031938] ACPI: Power Button [PWRB]
Aug 28 17:47:50 B70-80 kernel: [    1.031969] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Aug 28 17:47:50 B70-80 kernel: [    1.031982] ACPI: Power Button [PWRF]
Aug 28 17:47:50 B70-80 kernel: [    1.032388] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Aug 28 17:47:50 B70-80 kernel: [    1.035032] Linux agpgart interface v0.103
Aug 28 17:47:50 B70-80 kernel: [    1.036404] loop: module loaded
Aug 28 17:47:50 B70-80 kernel: [    1.036549] libphy: Fixed MDIO Bus: probed
Aug 28 17:47:50 B70-80 kernel: [    1.036550] tun: Universal TUN/TAP device driver, 1.6
Aug 28 17:47:50 B70-80 kernel: [    1.036576] PPP generic driver version 2.4.2
Aug 28 17:47:50 B70-80 kernel: [    1.036609] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 28 17:47:50 B70-80 kernel: [    1.036610] ehci-pci: EHCI PCI platform driver
Aug 28 17:47:50 B70-80 kernel: [    1.036741] ehci-pci 0000:00:1d.0: EHCI Host Controller
Aug 28 17:47:50 B70-80 kernel: [    1.036747] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
Aug 28 17:47:50 B70-80 kernel: [    1.036757] ehci-pci 0000:00:1d.0: debug port 2
Aug 28 17:47:50 B70-80 kernel: [    1.040671] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
Aug 28 17:47:50 B70-80 kernel: [    1.040686] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1219000
Aug 28 17:47:50 B70-80 kernel: [    1.056069] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Aug 28 17:47:50 B70-80 kernel: [    1.056403] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Aug 28 17:47:50 B70-80 kernel: [    1.056405] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 28 17:47:50 B70-80 kernel: [    1.056417] usb usb1: Product: EHCI Host Controller
Aug 28 17:47:50 B70-80 kernel: [    1.056418] usb usb1: Manufacturer: Linux 4.15.0-33-generic ehci_hcd
Aug 28 17:47:50 B70-80 kernel: [    1.056419] usb usb1: SerialNumber: 0000:00:1d.0
Aug 28 17:47:50 B70-80 kernel: [    1.056590] hub 1-0:1.0: USB hub found
Aug 28 17:47:50 B70-80 kernel: [    1.056631] hub 1-0:1.0: 2 ports detected
Aug 28 17:47:50 B70-80 kernel: [    1.056979] ehci-platform: EHCI generic platform driver
Aug 28 17:47:50 B70-80 kernel: [    1.056995] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Aug 28 17:47:50 B70-80 kernel: [    1.056998] ohci-pci: OHCI PCI platform driver
Aug 28 17:47:50 B70-80 kernel: [    1.057007] ohci-platform: OHCI generic platform driver
Aug 28 17:47:50 B70-80 kernel: [    1.057014] uhci_hcd: USB Universal Host Controller Interface driver
Aug 28 17:47:50 B70-80 kernel: [    1.057148] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
Aug 28 17:47:50 B70-80 kernel: [    1.057150] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
Aug 28 17:47:50 B70-80 kernel: [    1.057168] xhci_hcd 0000:00:14.0: xHCI Host Controller
Aug 28 17:47:50 B70-80 kernel: [    1.057173] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
Aug 28 17:47:50 B70-80 kernel: [    1.058237] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
Aug 28 17:47:50 B70-80 kernel: [    1.058241] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
Aug 28 17:47:50 B70-80 kernel: [    1.058654] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Aug 28 17:47:50 B70-80 kernel: [    1.058656] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 28 17:47:50 B70-80 kernel: [    1.058658] usb usb2: Product: xHCI Host Controller
Aug 28 17:47:50 B70-80 kernel: [    1.058659] usb usb2: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
Aug 28 17:47:50 B70-80 kernel: [    1.058660] usb usb2: SerialNumber: 0000:00:14.0
Aug 28 17:47:50 B70-80 kernel: [    1.058874] hub 2-0:1.0: USB hub found
Aug 28 17:47:50 B70-80 kernel: [    1.058902] hub 2-0:1.0: 11 ports detected
Aug 28 17:47:50 B70-80 kernel: [    1.063324] xhci_hcd 0000:00:14.0: xHCI Host Controller
Aug 28 17:47:50 B70-80 kernel: [    1.063327] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
Aug 28 17:47:50 B70-80 kernel: [    1.063330] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
Aug 28 17:47:50 B70-80 kernel: [    1.063358] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
Aug 28 17:47:50 B70-80 kernel: [    1.063359] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 28 17:47:50 B70-80 kernel: [    1.063361] usb usb3: Product: xHCI Host Controller
Aug 28 17:47:50 B70-80 kernel: [    1.063362] usb usb3: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
Aug 28 17:47:50 B70-80 kernel: [    1.063363] usb usb3: SerialNumber: 0000:00:14.0
Aug 28 17:47:50 B70-80 kernel: [    1.063520] hub 3-0:1.0: USB hub found
Aug 28 17:47:50 B70-80 kernel: [    1.063527] hub 3-0:1.0: 4 ports detected
Aug 28 17:47:50 B70-80 kernel: [    1.065213] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Aug 28 17:47:50 B70-80 kernel: [    1.080007] serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 28 17:47:50 B70-80 kernel: [    1.080010] serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 28 17:47:50 B70-80 kernel: [    1.080244] mousedev: PS/2 mouse device common for all mice
Aug 28 17:47:50 B70-80 kernel: [    1.080739] rtc_cmos 00:01: RTC can wake from S4
Aug 28 17:47:50 B70-80 kernel: [    1.080748] rtc_cmos: probe of 00:01 failed with error -16
Aug 28 17:47:50 B70-80 kernel: [    1.080763] i2c /dev entries driver
Aug 28 17:47:50 B70-80 kernel: [    1.080807] device-mapper: uevent: version 1.0.3
Aug 28 17:47:50 B70-80 kernel: [    1.080871] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
Aug 28 17:47:50 B70-80 kernel: [    1.080878] intel_pstate: Intel P-state driver initializing
Aug 28 17:47:50 B70-80 kernel: [    1.081028] ledtrig-cpu: registered to indicate activity on CPUs
Aug 28 17:47:50 B70-80 kernel: [    1.081030] EFI Variables Facility v0.08 2004-May-17
Aug 28 17:47:50 B70-80 kernel: [    1.090078] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Aug 28 17:47:50 B70-80 kernel: [    1.106848] NET: Registered protocol family 10
Aug 28 17:47:50 B70-80 kernel: [    1.109696] Segment Routing with IPv6
Aug 28 17:47:50 B70-80 kernel: [    1.109713] NET: Registered protocol family 17
Aug 28 17:47:50 B70-80 kernel: [    1.109748] Key type dns_resolver registered
Aug 28 17:47:50 B70-80 kernel: [    1.109942] RAS: Correctable Errors collector initialized.
Aug 28 17:47:50 B70-80 kernel: [    1.109970] microcode: sig=0x306d4, pf=0x40, revision=0x2b
Aug 28 17:47:50 B70-80 kernel: [    1.110009] microcode: Microcode Update Driver: v2.2.
Aug 28 17:47:50 B70-80 kernel: [    1.110019] sched_clock: Marking stable (1110005094, 0)->(1091841657, 18163437)
Aug 28 17:47:50 B70-80 kernel: [    1.110163] registered taskstats version 1
Aug 28 17:47:50 B70-80 kernel: [    1.110170] Loading compiled-in X.509 certificates
Aug 28 17:47:50 B70-80 kernel: [    1.112123] Loaded X.509 cert 'Build time autogenerated kernel key: b2b2adbda3eef7b219e699c1b87c022096150517'
Aug 28 17:47:50 B70-80 kernel: [    1.114053] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
Aug 28 17:47:50 B70-80 kernel: [    1.114073] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
Aug 28 17:47:50 B70-80 kernel: [    1.114083] Loaded UEFI:db cert 'Mocca: eee4ae78c24bf4a5488b6b77c611edde' linked to secondary sys keyring
Aug 28 17:47:50 B70-80 kernel: [    1.116185] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
Aug 28 17:47:50 B70-80 kernel: [    1.116813] zswap: loaded using pool lzo/zbud
Aug 28 17:47:50 B70-80 kernel: [    1.119568] Key type big_key registered
Aug 28 17:47:50 B70-80 kernel: [    1.119571] Key type trusted registered
Aug 28 17:47:50 B70-80 kernel: [    1.120950] Key type encrypted registered
Aug 28 17:47:50 B70-80 kernel: [    1.120952] AppArmor: AppArmor sha1 policy hashing enabled
Aug 28 17:47:50 B70-80 kernel: [    1.120954] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
Aug 28 17:47:50 B70-80 kernel: [    1.120969] evm: HMAC attrs: 0x1
Aug 28 17:47:50 B70-80 kernel: [    1.121446]   Magic number: 14:942:791
Aug 28 17:47:50 B70-80 kernel: [    1.121505] hctosys: unable to open rtc device (rtc0)
Aug 28 17:47:50 B70-80 kernel: [    1.121545] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Aug 28 17:47:50 B70-80 kernel: [    1.121546] EDD information not available.
Aug 28 17:47:50 B70-80 kernel: [    1.128753] ACPI: Battery Slot [BAT0] (battery present)
Aug 28 17:47:50 B70-80 kernel: [    1.392045] usb 1-1: new high-speed USB device number 2 using ehci-pci
Aug 28 17:47:50 B70-80 kernel: [    1.400045] usb 2-3: new full-speed USB device number 2 using xhci_hcd
Aug 28 17:47:50 B70-80 kernel: [    1.449073] Freeing unused kernel memory: 2408K
Aug 28 17:47:50 B70-80 kernel: [    1.468081] Write protecting the kernel read-only data: 20480k
Aug 28 17:47:50 B70-80 kernel: [    1.469211] Freeing unused kernel memory: 2008K
Aug 28 17:47:50 B70-80 kernel: [    1.472624] Freeing unused kernel memory: 1900K
Aug 28 17:47:50 B70-80 kernel: [    1.477600] x86/mm: Checked W+X mappings: passed, no W+X pages found.
Aug 28 17:47:50 B70-80 kernel: [    1.477600] x86/mm: Checking user space page tables
Aug 28 17:47:50 B70-80 kernel: [    1.482703] x86/mm: Checked W+X mappings: passed, no W+X pages found.
Aug 28 17:47:50 B70-80 kernel: [    1.554519] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
Aug 28 17:47:50 B70-80 kernel: [    1.554520] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Aug 28 17:47:50 B70-80 kernel: [    1.554699] usb 2-3: New USB device found, idVendor=046d, idProduct=c52f
Aug 28 17:47:50 B70-80 kernel: [    1.554700] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 28 17:47:50 B70-80 kernel: [    1.554701] usb 2-3: Product: USB Receiver
Aug 28 17:47:50 B70-80 kernel: [    1.554702] usb 2-3: Manufacturer: Logitech
Aug 28 17:47:50 B70-80 kernel: [    1.554809] hub 1-1:1.0: USB hub found
Aug 28 17:47:50 B70-80 kernel: [    1.554874] hub 1-1:1.0: 8 ports detected
Aug 28 17:47:50 B70-80 kernel: [    1.568618] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Aug 28 17:47:50 B70-80 kernel: [    1.568624] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
Aug 28 17:47:50 B70-80 kernel: [    1.576282] ahci 0000:00:1f.2: version 3.0
Aug 28 17:47:50 B70-80 kernel: [    1.581161] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x        (ptrval), 68:f7:28:ee:44:2e, XID 10900800 IRQ 47
Aug 28 17:47:50 B70-80 kernel: [    1.581162] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Aug 28 17:47:50 B70-80 kernel: [    1.581690] r8169 0000:02:00.0 enp2s0: renamed from eth0
Aug 28 17:47:50 B70-80 kernel: [    1.586569] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
Aug 28 17:47:50 B70-80 kernel: [    1.586571] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
Aug 28 17:47:50 B70-80 kernel: [    1.586936] scsi host0: ahci
Aug 28 17:47:50 B70-80 kernel: [    1.587017] scsi host1: ahci
Aug 28 17:47:50 B70-80 kernel: [    1.587078] scsi host2: ahci
Aug 28 17:47:50 B70-80 kernel: [    1.587134] scsi host3: ahci
Aug 28 17:47:50 B70-80 kernel: [    1.587161] ata1: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218100 irq 46
Aug 28 17:47:50 B70-80 kernel: [    1.587163] ata2: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218180 irq 46
Aug 28 17:47:50 B70-80 kernel: [    1.587163] ata3: DUMMY
Aug 28 17:47:50 B70-80 kernel: [    1.587164] ata4: DUMMY
Aug 28 17:47:50 B70-80 kernel: [    1.602100] [drm] Memory usable by graphics device = 4096M
Aug 28 17:47:50 B70-80 kernel: [    1.602102] checking generic (b0000000 580000) vs hw (b0000000 10000000)
Aug 28 17:47:50 B70-80 kernel: [    1.602103] fb: switching to inteldrmfb from EFI VGA
Aug 28 17:47:50 B70-80 kernel: [    1.602118] Console: switching to colour dummy device 80x25
Aug 28 17:47:50 B70-80 kernel: [    1.602210] [drm] Replacing VGA console driver
Aug 28 17:47:50 B70-80 kernel: [    1.608117] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Aug 28 17:47:50 B70-80 kernel: [    1.608118] [drm] Driver supports precise vblank timestamp query.
Aug 28 17:47:50 B70-80 kernel: [    1.610235] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
Aug 28 17:47:50 B70-80 kernel: [    1.616375] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
Aug 28 17:47:50 B70-80 kernel: [    1.618021] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
Aug 28 17:47:50 B70-80 kernel: [    1.618331] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
Aug 28 17:47:50 B70-80 kernel: [    1.651446] fbcon: inteldrmfb (fb0) is primary device
Aug 28 17:47:50 B70-80 kernel: [    1.651503] Console: switching to colour frame buffer device 200x56
Aug 28 17:47:50 B70-80 kernel: [    1.651533] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Aug 28 17:47:50 B70-80 kernel: [    1.684127] usb 2-4: new high-speed USB device number 3 using xhci_hcd
Aug 28 17:47:50 B70-80 kernel: [    1.832416] usb 2-4: New USB device found, idVendor=0bda, idProduct=0129
Aug 28 17:47:50 B70-80 kernel: [    1.832418] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 28 17:47:50 B70-80 kernel: [    1.832420] usb 2-4: Product: USB2.0-CRW
Aug 28 17:47:50 B70-80 kernel: [    1.832421] usb 2-4: Manufacturer: Generic
Aug 28 17:47:50 B70-80 kernel: [    1.832422] usb 2-4: SerialNumber: 20100201396000000
Aug 28 17:47:50 B70-80 kernel: [    1.903794] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Aug 28 17:47:50 B70-80 kernel: [    1.903810] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 28 17:47:50 B70-80 kernel: [    1.904538] ata1.00: ATA-9: WDC WD5000LPVX-00V0TT0, 01.01A01, max UDMA/133
Aug 28 17:47:50 B70-80 kernel: [    1.904540] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Aug 28 17:47:50 B70-80 kernel: [    1.905338] ata1.00: configured for UDMA/133
Aug 28 17:47:50 B70-80 kernel: [    1.905602] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-0 1A01 PQ: 0 ANSI: 5
Aug 28 17:47:50 B70-80 kernel: [    1.905895] ata2.00: ATAPI: HL-DT-ST DVDRAM GUC0N, T.02, max UDMA/133
Aug 28 17:47:50 B70-80 kernel: [    1.905948] sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 28 17:47:50 B70-80 kernel: [    1.905959] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
Aug 28 17:47:50 B70-80 kernel: [    1.905961] sd 0:0:0:0: [sda] 4096-byte physical blocks
Aug 28 17:47:50 B70-80 kernel: [    1.905975] sd 0:0:0:0: [sda] Write Protect is off
Aug 28 17:47:50 B70-80 kernel: [    1.905977] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 28 17:47:50 B70-80 kernel: [    1.906000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 28 17:47:50 B70-80 kernel: [    1.907187] ata2.00: configured for UDMA/133
Aug 28 17:47:50 B70-80 kernel: [    1.910067] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUC0N     T.02 PQ: 0 ANSI: 5
Aug 28 17:47:50 B70-80 kernel: [    1.914326] random: fast init done
Aug 28 17:47:50 B70-80 kernel: [    1.937673] random: systemd-udevd: uninitialized urandom read (16 bytes read)
Aug 28 17:47:50 B70-80 kernel: [    1.937689] random: systemd-udevd: uninitialized urandom read (16 bytes read)
Aug 28 17:47:50 B70-80 kernel: [    1.937691] random: systemd-udevd: uninitialized urandom read (16 bytes read)
Aug 28 17:47:50 B70-80 kernel: [    1.959939]  sda: sda1 sda2 sda3 sda4 sda5
Aug 28 17:47:50 B70-80 kernel: [    1.960071] usb 2-6: new high-speed USB device number 4 using xhci_hcd
Aug 28 17:47:50 B70-80 kernel: [    1.960468] sd 0:0:0:0: [sda] Attached SCSI disk
Aug 28 17:47:50 B70-80 kernel: [    1.972157] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Aug 28 17:47:50 B70-80 kernel: [    1.972159] cdrom: Uniform CD-ROM driver Revision: 3.20
Aug 28 17:47:50 B70-80 kernel: [    1.972310] sr 1:0:0:0: Attached scsi CD-ROM sr0
Aug 28 17:47:50 B70-80 kernel: [    1.972384] sr 1:0:0:0: Attached scsi generic sg1 type 5
Aug 28 17:47:50 B70-80 kernel: [    2.044075] tsc: Refined TSC clocksource calibration: 2394.455 MHz
Aug 28 17:47:50 B70-80 kernel: [    2.044082] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c1579c6, max_idle_ns: 440795259439 ns
Aug 28 17:47:50 B70-80 kernel: [    2.147125] usb 2-6: New USB device found, idVendor=0bda, idProduct=579a
Aug 28 17:47:50 B70-80 kernel: [    2.147127] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
Aug 28 17:47:50 B70-80 kernel: [    2.147129] usb 2-6: Product: Lenovo EasyCamera
Aug 28 17:47:50 B70-80 kernel: [    2.147131] usb 2-6: Manufacturer: J58F5583G
Aug 28 17:47:50 B70-80 kernel: [    2.147132] usb 2-6: SerialNumber: 200901010001
Aug 28 17:47:50 B70-80 kernel: [    2.204789] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03)
Aug 28 17:47:50 B70-80 kernel: [    2.219436] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a.
Aug 28 17:47:50 B70-80 kernel: [    2.234158] psmouse serio1: elantech: Elan sample query result 05, 20, 97
Aug 28 17:47:50 B70-80 kernel: [    2.276093] usb 2-7: new full-speed USB device number 5 using xhci_hcd
Aug 28 17:47:50 B70-80 kernel: [    2.318821] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
Aug 28 17:47:50 B70-80 kernel: [    2.425140] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
Aug 28 17:47:50 B70-80 kernel: [    2.425142] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Aug 28 17:47:50 B70-80 kernel: [    2.430040] hidraw: raw HID events driver (C) Jiri Kosina
Aug 28 17:47:50 B70-80 kernel: [    2.431694] usbcore: registered new interface driver rtsx_usb
Aug 28 17:47:50 B70-80 kernel: [    2.433271] usbcore: registered new interface driver usbhid
Aug 28 17:47:50 B70-80 kernel: [    2.433272] usbhid: USB HID core driver
Aug 28 17:47:50 B70-80 kernel: [    2.434848] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:046D:C52F.0001/input/input7
Aug 28 17:47:50 B70-80 kernel: [    2.434959] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
Aug 28 17:47:50 B70-80 kernel: [    2.435149] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52F.0002/input/input8
Aug 28 17:47:50 B70-80 kernel: [    2.492343] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
Aug 28 17:47:50 B70-80 kernel: [    3.008541] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Aug 28 17:47:50 B70-80 kernel: [    3.068133] clocksource: Switched to clocksource tsc
Aug 28 17:47:50 B70-80 kernel: [    4.112397] ip_tables: (C) 2000-2006 Netfilter Core Team
Aug 28 17:47:50 B70-80 kernel: [    4.174426] random: crng init done
Aug 28 17:47:50 B70-80 kernel: [    4.174427] random: 7 urandom warning(s) missed due to ratelimiting
Aug 28 17:47:50 B70-80 kernel: [    7.040621] lp: driver loaded but no devices found
Aug 28 17:47:50 B70-80 kernel: [    7.120040] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
Aug 28 17:47:50 B70-80 kernel: [    7.491403] ppdev: user-space parallel port driver
Aug 28 17:47:50 B70-80 kernel: [    8.022476] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
Aug 28 17:47:50 B70-80 kernel: [    8.404666] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Aug 28 17:47:50 B70-80 kernel: [    8.672537] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
Aug 28 17:47:50 B70-80 kernel: [    8.672538] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
Aug 28 17:47:50 B70-80 kernel: [    8.672539] RAPL PMU: hw unit of domain package 2^-14 Joules
Aug 28 17:47:50 B70-80 kernel: [    8.672540] RAPL PMU: hw unit of domain dram 2^-14 Joules
Aug 28 17:47:50 B70-80 kernel: [    8.672541] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
Aug 28 17:47:50 B70-80 kernel: [    8.875695] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Aug 28 17:47:50 B70-80 kernel: [    8.875900] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Aug 28 17:47:50 B70-80 kernel: [    9.237784] Intel(R) Wireless WiFi driver for Linux
Aug 28 17:47:50 B70-80 kernel: [    9.237785] Copyright(c) 2003- 2015 Intel Corporation
Aug 28 17:47:50 B70-80 kernel: [    9.295786] iwlwifi 0000:03:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
Aug 28 17:47:50 B70-80 kernel: [    9.356464] AVX2 version of gcm_enc/dec engaged.
Aug 28 17:47:50 B70-80 kernel: [    9.356465] AES CTR mode by8 optimization enabled
Aug 28 17:47:50 B70-80 kernel: [    9.392104] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
Aug 28 17:47:50 B70-80 kernel: [    9.414209] iwlwifi 0000:03:00.0: base HW address: e4:f8:9c:13:f4:6b
Aug 28 17:47:50 B70-80 kernel: [    9.645395] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
Aug 28 17:47:50 B70-80 kernel: [    9.693851] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
Aug 28 17:47:50 B70-80 kernel: [    9.757813] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Aug 28 17:47:50 B70-80 kernel: [    9.907440] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
Aug 28 17:47:50 B70-80 kernel: [    9.907742] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
Aug 28 17:47:50 B70-80 kernel: [    9.907744] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Aug 28 17:47:50 B70-80 kernel: [    9.907745] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
Aug 28 17:47:50 B70-80 kernel: [    9.907746] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
Aug 28 17:47:50 B70-80 kernel: [    9.907747] snd_hda_codec_conexant hdaudioC1D0:    inputs:
Aug 28 17:47:50 B70-80 kernel: [    9.907748] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
Aug 28 17:47:50 B70-80 kernel: [    9.907749] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
Aug 28 17:47:50 B70-80 kernel: [    9.908509] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
Aug 28 17:47:50 B70-80 kernel: [    9.910901] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
Aug 28 17:47:50 B70-80 kernel: [    9.910961] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
Aug 28 17:47:50 B70-80 kernel: [    9.917458] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
Aug 28 17:47:50 B70-80 kernel: [    9.917516] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
Aug 28 17:47:50 B70-80 kernel: [    9.917572] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
Aug 28 17:47:50 B70-80 kernel: [    9.917624] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
Aug 28 17:47:50 B70-80 kernel: [    9.917673] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
Aug 28 17:47:50 B70-80 kernel: [   10.585821] intel_rapl: Found RAPL domain package
Aug 28 17:47:50 B70-80 kernel: [   10.585823] intel_rapl: Found RAPL domain core
Aug 28 17:47:50 B70-80 kernel: [   10.585823] intel_rapl: Found RAPL domain uncore
Aug 28 17:47:50 B70-80 kernel: [   10.585824] intel_rapl: Found RAPL domain dram
Aug 28 17:47:50 B70-80 kernel: [   10.585826] intel_rapl: RAPL package 0 domain package locked by BIOS
Aug 28 17:47:50 B70-80 kernel: [   10.585830] intel_rapl: RAPL package 0 domain dram locked by BIOS
Aug 28 17:47:50 B70-80 kernel: [   11.533898] Bluetooth: Core ver 2.22
Aug 28 17:47:50 B70-80 kernel: [   11.533917] NET: Registered protocol family 31
Aug 28 17:47:50 B70-80 kernel: [   11.533917] Bluetooth: HCI device and connection manager initialized
Aug 28 17:47:50 B70-80 kernel: [   11.533920] Bluetooth: HCI socket layer initialized
Aug 28 17:47:50 B70-80 kernel: [   11.533921] Bluetooth: L2CAP socket layer initialized
Aug 28 17:47:50 B70-80 kernel: [   11.533924] Bluetooth: SCO socket layer initialized
Aug 28 17:47:50 B70-80 kernel: [   11.824346] usbcore: registered new interface driver btusb
Aug 28 17:47:50 B70-80 kernel: [   11.837695] Bluetooth: hci0: read Intel version: 3707100100012d0d27
Aug 28 17:47:50 B70-80 kernel: [   11.837696] Bluetooth: hci0: Intel device is already patched. patch num: 27
Aug 28 17:47:50 B70-80 kernel: [   12.140829] media: Linux media interface: v0.10
Aug 28 17:47:50 B70-80 kernel: [   12.163689] Linux video capture interface: v2.00
Aug 28 17:47:50 B70-80 kernel: [   12.469199] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:579a)
Aug 28 17:47:50 B70-80 kernel: [   12.471927] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
Aug 28 17:47:50 B70-80 kernel: [   12.471929] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
Aug 28 17:47:50 B70-80 kernel: [   12.471932] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
Aug 28 17:47:50 B70-80 kernel: [   12.472014] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input17
Aug 28 17:47:50 B70-80 kernel: [   12.472108] usbcore: registered new interface driver uvcvideo
Aug 28 17:47:50 B70-80 kernel: [   12.472108] USB Video Class driver (1.1.1)
Aug 28 17:47:50 B70-80 kernel: [   13.021782] Adding 8788988k swap on /dev/sda2.  Priority:-2 extents:1 across:8788988k FS
Aug 28 17:47:50 B70-80 kernel: [   15.738981] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Aug 28 17:47:50 B70-80 kernel: [   15.886915] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Aug 28 17:47:50 B70-80 kernel: [   23.367563] audit: type=1400 audit(1535471258.360:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=753 comm="apparmor_parser"
Aug 28 17:47:50 B70-80 kernel: [   23.367570] audit: type=1400 audit(1535471258.360:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=753 comm="apparmor_parser"
Aug 28 17:47:50 B70-80 kernel: [   23.367573] audit: type=1400 audit(1535471258.360:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=753 comm="apparmor_parser"
Aug 28 17:47:50 B70-80 kernel: [   23.367577] audit: type=1400 audit(1535471258.360:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=753 comm="apparmor_parser"
Aug 28 17:47:50 B70-80 kernel: [   23.369361] audit: type=1400 audit(1535471258.364:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=757 comm="apparmor_parser"
Aug 28 17:47:50 B70-80 kernel: [   23.369473] audit: type=1400 audit(1535471258.364:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=756 comm="apparmor_parser"
Aug 28 17:47:50 B70-80 kernel: [   23.369476] audit: type=1400 audit(1535471258.364:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=756 comm="apparmor_parser"
Aug 28 17:47:50 B70-80 kernel: [   23.369478] audit: type=1400 audit(1535471258.364:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=756 comm="apparmor_parser"
Aug 28 17:47:50 B70-80 kernel: [   23.370610] audit: type=1400 audit(1535471258.364:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=758 comm="apparmor_parser"
Aug 28 17:47:50 B70-80 kernel: [   23.370890] audit: type=1400 audit(1535471258.364:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=760 comm="apparmor_parser"
Aug 28 17:47:50 B70-80 kernel: [   35.223747] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Aug 28 17:47:50 B70-80 kernel: [   35.223748] Bluetooth: BNEP filters: protocol multicast
Aug 28 17:47:50 B70-80 kernel: [   35.223751] Bluetooth: BNEP socket layer initialized
Aug 28 17:47:53 B70-80 kernel: [   38.287168] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
Aug 28 17:47:53 B70-80 kernel: [   38.401997] r8169 0000:02:00.0 enp2s0: link down
Aug 28 17:47:53 B70-80 kernel: [   38.402072] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
Aug 28 17:47:53 B70-80 kernel: [   38.417977] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Aug 28 17:47:53 B70-80 kernel: [   38.572121] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Aug 28 17:47:53 B70-80 kernel: [   38.627291] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Aug 28 17:47:56 B70-80 kernel: [   41.943835] wlp3s0: authenticate with a0:64:8f:38:b2:c9
Aug 28 17:47:56 B70-80 kernel: [   41.950161] wlp3s0: send auth to a0:64:8f:38:b2:c9 (try 1/3)
Aug 28 17:47:56 B70-80 kernel: [   41.951471] wlp3s0: authenticated
Aug 28 17:47:56 B70-80 kernel: [   41.952066] wlp3s0: associate with a0:64:8f:38:b2:c9 (try 1/3)
Aug 28 17:47:56 B70-80 kernel: [   41.953048] wlp3s0: RX AssocResp from a0:64:8f:38:b2:c9 (capab=0x11 status=0 aid=6)
Aug 28 17:47:56 B70-80 kernel: [   41.954266] wlp3s0: associated
Aug 28 17:47:56 B70-80 kernel: [   41.970355] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Aug 28 17:47:56 B70-80 kernel: [   41.972110] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by a0:64:8f:38:b2:c9
Aug 28 17:47:59 B70-80 kernel: [   44.574275] Bluetooth: RFCOMM TTY layer initialized
Aug 28 17:47:59 B70-80 kernel: [   44.574281] Bluetooth: RFCOMM socket layer initialized
Aug 28 17:47:59 B70-80 kernel: [   44.574285] Bluetooth: RFCOMM ver 1.11
Aug 28 17:48:02 B70-80 kernel: [   47.708950] rfkill: input handler disabled

Mornagest · Le 28/08/2018, à 21:04

Il y a des trucs que tu peux désactiver lors du démarrage, notamment "NetworkManager-wait-online.service" dont tu n'as pas besoin sauf démarrage très particulier de ta machine via le réseau (ou un truc du genre ).

Tu peux faire sudo systemctl disable NetworkManager-wait-online.service

J'ai vu aussi ça ce matin, et il va se lancer à chaque démarrage journalier, pour te ficher la paix jusqu'au lendemain : apt-daily.service et apt-daily-upgrade.service. Ils servent à lancer le gestionnaire de mise à jour et t'indiquer s'il y en a qui sont disponibles. Ce que j'ai fait et qui marche bien, c'est que j'ai désactivé ces deux services et je lance manuellement ma recherche de mise à jour en ligne de commandes (plus rapide que de passer par un logiciel graphique, de toute façon). Il faut juste penser à le faire toi-même...

Si tu veux les désactiver, même principe : sudo systemctl disable apt-daily.service et sudo systemctl disable apt-daily-upgrade.service.

f.vuilliomenet · Le 28/08/2018, à 22:21

merci,
Je vais désactiver ça et tester le démarrage
C'est bien d'avoir retrouver un boot d'une minute
Je vais faire mon install complète sur mon disque 1T et voir si tous fonctionne et je reviens donner des nouvelles
merci
Fabrice

f.vuilliomenet · Le 28/08/2018, à 22:45

voilà
tester les commandes:sudo systemctl disable NetworkManager-wait-online.service et sudo systemctl disable apt-daily.service et sudo systemctl disable apt-daily-upgrade.service.
gain de 15 secondes environ.

systemd-analyze

Startup finished in 4.051s (firmware) + 11.359s (loader) + 3.727s (kernel) + 1min 1.115s (userspace) = 1min 20.254s
graphical.target reached after 59.332s in userspace

dmesg

[    0.000000] microcode: microcode updated early to revision 0x2b, date = 2018-03-22
[    0.000000] Linux version 4.15.0-33-generic (buildd@lcy01-amd64-024) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #36-Ubuntu SMP Wed Aug 15 16:00:05 UTC 2018 (Ubuntu 4.15.0-33.36-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=UUID=0622aaec-ac6d-4d65-b7af-510a467492fc ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000087fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096f79fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000096f7a000-0x0000000097879fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009787a000-0x000000009c48efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009c48f000-0x000000009c68efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000009c68f000-0x000000009ce7efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  SMBIOS=0x9c708000  ACPI 2.0=0x9cffe014 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 80MR/Lenovo B70-80, BIOS D1CN06WW 05/18/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 009D000000 mask 7FFF000000 uncachable
[    0.000000]   2 base 009E000000 mask 7FFE000000 uncachable
[    0.000000]   3 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 14800M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 2e000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1a773f000, 0x1a773ffff] PGTABLE
[    0.000000] BRK [0x1a7740000, 0x1a7740fff] PGTABLE
[    0.000000] BRK [0x1a7741000, 0x1a7741fff] PGTABLE
[    0.000000] BRK [0x1a7742000, 0x1a7742fff] PGTABLE
[    0.000000] BRK [0x1a7743000, 0x1a7743fff] PGTABLE
[    0.000000] BRK [0x1a7744000, 0x1a7744fff] PGTABLE
[    0.000000] BRK [0x1a7745000, 0x1a7745fff] PGTABLE
[    0.000000] BRK [0x1a7746000, 0x1a7746fff] PGTABLE
[    0.000000] BRK [0x1a7747000, 0x1a7747fff] PGTABLE
[    0.000000] BRK [0x1a7748000, 0x1a7748fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31615000-0x34b01fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000009CFD0188 0000D4 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009CFF6000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000009CFE0000 00FE6F (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009CF7A000 000040
[    0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009CFFA000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000009CFF8000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000009CFF4000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000009CFF2000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x000000009CFF0000 000224 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDC000 00340B (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDB000 000539 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD4000 005C31 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000009CFFB000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000009CFF7000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000009CFF3000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDA000 000B74 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000009CFF9000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SLIC 0x000000009CFF1000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000009CFF5000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000009CFD3000 0000F8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: CSRT 0x000000009CFD2000 0000C4 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000009CFD1000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000009CFCF000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x25efd5000-0x25effffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000025effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000087fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000096f79fff]
[    0.000000]   node   0: [mem 0x000000009787a000-0x000000009c48efff]
[    0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000025effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
[    0.000000] On node 0 totalpages: 2075414
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 1120 pages reserved
[    0.000000]   DMA zone: 3974 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9903 pages used for memmap
[    0.000000]   DMA32 zone: 633744 pages, LIFO batch:31
[    0.000000]   Normal zone: 22464 pages used for memmap
[    0.000000]   Normal zone: 1437696 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 99 pages
[    0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x96f7a000-0x97879fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9c48f000-0x9c68efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9c68f000-0x9ce7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9dffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2041863
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=UUID=0622aaec-ac6d-4d65-b7af-510a467492fc ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7960508K/8301656K available (12300K kernel code, 2470K rwdata, 4244K rodata, 2408K init, 2416K bss, 341148K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39121 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 39
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.000000] DMAR: RMRR base: 0x0000009ce24000 end: 0x0000009ce43fff
[    0.000000] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[    0.000000] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[    0.000000] DMAR: ANDD device: 2 name: \_SB.PCI0.SDHC
[    0.000000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 2394.478 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.95 BogoMIPS (lpj=9577912)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.028198] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.028981] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.029018] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029044] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029251] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.029251] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.029257] mce: CPU supports 7 MCE banks
[    0.029274] process: using mwait in idle threads
[    0.029276] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.029277] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.029279] Spectre V2 : Mitigation: Full generic retpoline
[    0.029279] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.029280] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.029281] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.035544] Freeing SMP alternatives memory: 36K
[    0.041648] TSC deadline timer enabled
[    0.041650] smpboot: CPU0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.041712] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.041754] ... version:                3
[    0.041755] ... bit width:              48
[    0.041755] ... generic registers:      4
[    0.041756] ... value mask:             0000ffffffffffff
[    0.041757] ... max period:             00007fffffffffff
[    0.041757] ... fixed-purpose events:   3
[    0.041758] ... event mask:             000000070000000f
[    0.041788] Hierarchical SRCU implementation.
[    0.042791] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.042804] smp: Bringing up secondary CPUs ...
[    0.042875] x86: Booting SMP configuration:
[    0.042876] .... node  #0, CPUs:      #1 #2 #3
[    0.044601] smp: Brought up 1 node, 4 CPUs
[    0.044601] smpboot: Max logical packages: 1
[    0.044601] smpboot: Total of 4 processors activated (19155.82 BogoMIPS)
[    0.048250] devtmpfs: initialized
[    0.048250] x86/mm: Memory block size: 128MB
[    0.048698] evm: security.selinux
[    0.048699] evm: security.SMACK64
[    0.048700] evm: security.SMACK64EXEC
[    0.048700] evm: security.SMACK64TRANSMUTE
[    0.048701] evm: security.SMACK64MMAP
[    0.048701] evm: security.apparmor
[    0.048702] evm: security.ima
[    0.048702] evm: security.capability
[    0.048715] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
[    0.048715] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.048715] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.048715] pinctrl core: initialized pinctrl subsystem
[    0.048715] RTC time: 20:38:48, date: 08/28/18
[    0.048715] NET: Registered protocol family 16
[    0.048715] audit: initializing netlink subsys (disabled)
[    0.048715] audit: type=2000 audit(1535488728.048:1): state=initialized audit_enabled=0 res=1
[    0.048715] cpuidle: using governor ladder
[    0.048715] cpuidle: using governor menu
[    0.048715] Simple Boot Flag at 0x44 set to 0x1
[    0.048715] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.048715] ACPI: bus type PCI registered
[    0.048715] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.048715] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.048715] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.048715] PCI: Using configuration type 1 for base access
[    0.049192] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.049192] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.049192] ACPI: Added _OSI(Module Device)
[    0.049192] ACPI: Added _OSI(Processor Device)
[    0.049192] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.049192] ACPI: Added _OSI(Processor Aggregator Device)
[    0.049192] ACPI: Added _OSI(Linux-Dell-Video)
[    0.052008] ACPI: Executed 7 blocks of module-level executable AML code
[    0.061860] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.061860] ACPI: Dynamic OEM Table Load:
[    0.061860] ACPI: SSDT 0xFFFF894B94948000 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20121220)
[    0.064025] ACPI: Dynamic OEM Table Load:
[    0.064034] ACPI: SSDT 0xFFFF894B94E82000 0005AA (v02 PmRef  ApIst    00003000 INTL 20121220)
[    0.064609] ACPI: Dynamic OEM Table Load:
[    0.064609] ACPI: SSDT 0xFFFF894B94908400 000119 (v02 PmRef  ApCst    00003000 INTL 20121220)
[    0.065277] ACPI: EC: EC started
[    0.065277] ACPI: EC: interrupt blocked
[    0.066350] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.066351] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.066354] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.066354] ACPI: Interpreter enabled
[    0.066398] ACPI: (supports S0 S3 S4 S5)
[    0.066399] ACPI: Using IOAPIC for interrupt routing
[    0.066438] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.066873] ACPI: GPE 0x62 active on init
[    0.066889] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.088208] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.088214] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.089467] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.089468] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.090590] PCI host bridge to bus 0000:00
[    0.090592] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.090593] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.090595] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.090596] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
[    0.090598] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.090607] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.090934] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.090945] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[    0.090952] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.090956] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.090970] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.091296] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.091307] pci 0000:00:03.0: reg 0x10: [mem 0xc1210000-0xc1213fff 64bit]
[    0.091656] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.091675] pci 0000:00:14.0: reg 0x10: [mem 0xc1200000-0xc120ffff 64bit]
[    0.091732] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.092048] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.092070] pci 0000:00:16.0: reg 0x10: [mem 0xc121b000-0xc121b01f 64bit]
[    0.092137] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.092447] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.092466] pci 0000:00:1b.0: reg 0x10: [mem 0xc1214000-0xc1217fff 64bit]
[    0.092522] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.092828] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.092895] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.093261] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.093331] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.093697] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[    0.093767] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.094135] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[    0.095340] pci 0000:00:1d.0: reg 0x10: [mem 0xc1219000-0xc12193ff]
[    0.098712] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.099028] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.099442] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.099457] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.099464] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.099470] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.099477] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.099484] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.099490] pci 0000:00:1f.2: reg 0x24: [mem 0xc1218000-0xc12187ff]
[    0.099524] pci 0000:00:1f.2: PME# supported from D3hot
[    0.099826] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.099843] pci 0000:00:1f.3: reg 0x10: [mem 0xc121a000-0xc121a0ff 64bit]
[    0.099861] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.100236] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.100307] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.100338] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.100366] pci 0000:02:00.0: reg 0x18: [mem 0xc1104000-0xc1104fff 64bit]
[    0.100383] pci 0000:02:00.0: reg 0x20: [mem 0xc1100000-0xc1103fff 64bit]
[    0.100483] pci 0000:02:00.0: supports D1 D2
[    0.100485] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112026] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.112030] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.112033] pci 0000:00:1c.2:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.112312] pci 0000:03:00.0: [8086:08b4] type 00 class 0x028000
[    0.112421] pci 0000:03:00.0: reg 0x10: [mem 0xc1000000-0xc1001fff 64bit]
[    0.112814] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.124168] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.124172] pci 0000:00:1c.3:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.125890] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.125964] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.126034] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.126104] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.126175] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.126245] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.126314] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.126384] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.126821] ACPI: EC: interrupt unblocked
[    0.126829] ACPI: EC: event unblocked
[    0.126847] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.126848] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.127057] SCSI subsystem initialized
[    0.127067] libata version 3.00 loaded.
[    0.127067] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.127067] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.127067] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.127067] vgaarb: loaded
[    0.127067] ACPI: bus type USB registered
[    0.127067] usbcore: registered new interface driver usbfs
[    0.127067] usbcore: registered new interface driver hub
[    0.127067] usbcore: registered new device driver usb
[    0.127067] EDAC MC: Ver: 3.0.0
[    0.127067] Registered efivars operations
[    0.154405] PCI: Using ACPI for IRQ routing
[    0.156299] PCI: pci_cache_line_size set to 64 bytes
[    0.156616] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.156617] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.156618] e820: reserve RAM buffer [mem 0x96f7a000-0x97ffffff]
[    0.156619] e820: reserve RAM buffer [mem 0x9c48f000-0x9fffffff]
[    0.156621] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.156622] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[    0.156715] NetLabel: Initializing
[    0.156716] NetLabel:  domain hash size = 128
[    0.156717] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.156731] NetLabel:  unlabeled traffic allowed by default
[    0.160312] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.160318] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.161019] clocksource: Switched to clocksource hpet
[    0.170491] VFS: Disk quotas dquot_6.6.0
[    0.170508] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.170612] AppArmor: AppArmor Filesystem Enabled
[    0.170640] pnp: PnP ACPI init
[    0.171765] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.171768] system 00:00: [io  0xffff] has been reserved
[    0.171769] system 00:00: [io  0xffff] has been reserved
[    0.171771] system 00:00: [io  0xffff] has been reserved
[    0.171773] system 00:00: [io  0x1800-0x18fe] could not be reserved
[    0.171774] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.171780] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.171835] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.171884] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.171887] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.171949] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.172010] pnp 00:04: Plug and Play ACPI device, IDs ETD0624 ETD0000 PNP0f13 (active)
[    0.172432] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.172434] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.172436] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.172437] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.172439] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.172441] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.172443] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.172444] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.172446] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.172448] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.172449] system 00:05: [mem 0xa0010000-0xa001ffff] has been reserved
[    0.172451] system 00:05: [mem 0xa0000000-0xa000ffff] has been reserved
[    0.172455] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.172801] pnp: PnP ACPI: found 6 devices
[    0.178743] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.178755] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.178759] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.178761] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.178777] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
[    0.178781] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.178784] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.178786] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.178788] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.178792] pci 0000:00:1c.0:   bridge window [mem 0xa0100000-0xa02fffff]
[    0.178795] pci 0000:00:1c.0:   bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.178800] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.178802] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.178806] pci 0000:00:1c.2:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.178812] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.178816] pci 0000:00:1c.3:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.178823] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.178825] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.178827] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.178830] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window]
[    0.178831] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.178833] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
[    0.178834] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.178836] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.178837] pci_bus 0000:02: resource 1 [mem 0xc1100000-0xc11fffff]
[    0.178839] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc10fffff]
[    0.178979] NET: Registered protocol family 2
[    0.179180] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.179298] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.179468] TCP: Hash tables configured (established 65536 bind 65536)
[    0.179503] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.179531] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.179590] NET: Registered protocol family 1
[    0.179601] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.179695] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.179696] pci 0000:00:14.0: PCI INT A: no GSI
[    0.200269] PCI: CLS 64 bytes, default 64
[    0.200301] Unpacking initramfs...
[    1.033340] Freeing initrd memory: 54196K
[    1.033382] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
[    1.033387] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
[    1.033401] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.033405] software IO TLB [mem 0x8f84e000-0x9384e000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    1.033593] Scanning for low memory corruption every 60 seconds
[    1.034199] Initialise system trusted keyrings
[    1.034206] Key type blacklist registered
[    1.034240] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.035309] zbud: loaded
[    1.035779] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.035896] fuse init (API version 7.26)
[    1.037103] Key type asymmetric registered
[    1.037104] Asymmetric key parser 'x509' registered
[    1.037133] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.037164] io scheduler noop registered
[    1.037165] io scheduler deadline registered
[    1.037203] io scheduler cfq registered (default)
[    1.037849] pcieport 0000:00:1c.0: Signaling PME with IRQ 42
[    1.037864] pcieport 0000:00:1c.2: Signaling PME with IRQ 43
[    1.037877] pcieport 0000:00:1c.3: Signaling PME with IRQ 44
[    1.037895] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.037962] efifb: probing for efifb
[    1.037972] efifb: framebuffer at 0xb0000000, using 5632k, total 5632k
[    1.037973] efifb: mode is 1600x900x32, linelength=6400, pages=1
[    1.037973] efifb: scrolling: redraw
[    1.037975] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.038057] Console: switching to colour frame buffer device 200x56
[    1.038077] fb0: EFI VGA frame buffer device
[    1.038086] intel_idle: MWAIT substates: 0x11142120
[    1.038087] intel_idle: v0.4.1 model 0x3D
[    1.038256] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.038713] ACPI: AC Adapter [ADP0] (off-line)
[    1.038773] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.038792] ACPI: Lid Switch [LID0]
[    1.038825] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.038840] ACPI: Power Button [PWRB]
[    1.038868] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.038883] ACPI: Power Button [PWRF]
[    1.039272] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.042128] Linux agpgart interface v0.103
[    1.043464] loop: module loaded
[    1.043603] libphy: Fixed MDIO Bus: probed
[    1.043603] tun: Universal TUN/TAP device driver, 1.6
[    1.043632] PPP generic driver version 2.4.2
[    1.043667] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.043669] ehci-pci: EHCI PCI platform driver
[    1.043793] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.043797] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.043808] ehci-pci 0000:00:1d.0: debug port 2
[    1.047713] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.047725] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1219000
[    1.060067] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.060114] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.060116] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.060117] usb usb1: Product: EHCI Host Controller
[    1.060118] usb usb1: Manufacturer: Linux 4.15.0-33-generic ehci_hcd
[    1.060120] usb usb1: SerialNumber: 0000:00:1d.0
[    1.060322] hub 1-0:1.0: USB hub found
[    1.060328] hub 1-0:1.0: 2 ports detected
[    1.060476] ehci-platform: EHCI generic platform driver
[    1.060490] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.060498] ohci-pci: OHCI PCI platform driver
[    1.060507] ohci-platform: OHCI generic platform driver
[    1.060513] uhci_hcd: USB Universal Host Controller Interface driver
[    1.060635] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.060637] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.060655] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.060659] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.061725] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[    1.061729] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.061843] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.061844] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.061846] usb usb2: Product: xHCI Host Controller
[    1.061847] usb usb2: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
[    1.061848] usb usb2: SerialNumber: 0000:00:14.0
[    1.062024] hub 2-0:1.0: USB hub found
[    1.062035] hub 2-0:1.0: 11 ports detected
[    1.067057] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.067061] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.067065] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.067097] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.067098] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.067100] usb usb3: Product: xHCI Host Controller
[    1.067101] usb usb3: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
[    1.067102] usb usb3: SerialNumber: 0000:00:14.0
[    1.067297] hub 3-0:1.0: USB hub found
[    1.067304] hub 3-0:1.0: 4 ports detected
[    1.069010] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.085857] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.085861] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.086066] mousedev: PS/2 mouse device common for all mice
[    1.086539] rtc_cmos 00:01: RTC can wake from S4
[    1.086548] rtc_cmos: probe of 00:01 failed with error -16
[    1.086562] i2c /dev entries driver
[    1.086608] device-mapper: uevent: version 1.0.3
[    1.086674] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.086681] intel_pstate: Intel P-state driver initializing
[    1.086848] ledtrig-cpu: registered to indicate activity on CPUs
[    1.086850] EFI Variables Facility v0.08 2004-May-17
[    1.099675] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.111079] NET: Registered protocol family 10
[    1.114090] Segment Routing with IPv6
[    1.114104] NET: Registered protocol family 17
[    1.114133] Key type dns_resolver registered
[    1.114324] RAS: Correctable Errors collector initialized.
[    1.114351] microcode: sig=0x306d4, pf=0x40, revision=0x2b
[    1.114390] microcode: Microcode Update Driver: v2.2.
[    1.114398] sched_clock: Marking stable (1114386448, 0)->(1096257975, 18128473)
[    1.114549] registered taskstats version 1
[    1.114556] Loading compiled-in X.509 certificates
[    1.116381] Loaded X.509 cert 'Build time autogenerated kernel key: b2b2adbda3eef7b219e699c1b87c022096150517'
[    1.118203] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[    1.118227] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[    1.118241] Loaded UEFI:db cert 'Mocca: eee4ae78c24bf4a5488b6b77c611edde' linked to secondary sys keyring
[    1.120603] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[    1.121228] zswap: loaded using pool lzo/zbud
[    1.123728] Key type big_key registered
[    1.123730] Key type trusted registered
[    1.124983] Key type encrypted registered
[    1.124986] AppArmor: AppArmor sha1 policy hashing enabled
[    1.124988] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.124999] evm: HMAC attrs: 0x1
[    1.125475]   Magic number: 14:819:650
[    1.125489] tty ttyprintk: hash matches
[    1.125526] acpi LNXCPU:03: hash matches
[    1.125538] hctosys: unable to open rtc device (rtc0)
[    1.125575] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.125576] EDD information not available.
[    1.136913] ACPI: Battery Slot [BAT0] (battery present)
[    1.396029] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.400030] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[    1.457430] Freeing unused kernel memory: 2408K
[    1.480103] Write protecting the kernel read-only data: 20480k
[    1.481240] Freeing unused kernel memory: 2008K
[    1.484587] Freeing unused kernel memory: 1900K
[    1.489560] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.489560] x86/mm: Checking user space page tables
[    1.494660] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.550038] usb 2-3: New USB device found, idVendor=046d, idProduct=c52f
[    1.550040] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.550042] usb 2-3: Product: USB Receiver
[    1.550044] usb 2-3: Manufacturer: Logitech
[    1.552771] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
[    1.552773] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.553112] hub 1-1:1.0: USB hub found
[    1.553264] hub 1-1:1.0: 8 ports detected
[    1.570517] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.570525] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.571451] ahci 0000:00:1f.2: version 3.0
[    1.581718] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[    1.581722] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.582364] scsi host0: ahci
[    1.585627] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x        (ptrval), 68:f7:28:ee:44:2e, XID 10900800 IRQ 47
[    1.585629] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.585683] scsi host1: ahci
[    1.585801] scsi host2: ahci
[    1.585881] scsi host3: ahci
[    1.585930] ata1: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218100 irq 46
[    1.585932] ata2: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218180 irq 46
[    1.585933] ata3: DUMMY
[    1.585934] ata4: DUMMY
[    1.596976] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.619846] [drm] Memory usable by graphics device = 4096M
[    1.619860] checking generic (b0000000 580000) vs hw (b0000000 10000000)
[    1.619861] fb: switching to inteldrmfb from EFI VGA
[    1.619881] Console: switching to colour dummy device 80x25
[    1.619959] [drm] Replacing VGA console driver
[    1.625940] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.625941] [drm] Driver supports precise vblank timestamp query.
[    1.628022] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.634225] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    1.635892] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.636215] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.669436] fbcon: inteldrmfb (fb0) is primary device
[    1.669482] Console: switching to colour frame buffer device 200x56
[    1.669503] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.676052] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[    1.824373] usb 2-4: New USB device found, idVendor=0bda, idProduct=0129
[    1.824375] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.824377] usb 2-4: Product: USB2.0-CRW
[    1.824378] usb 2-4: Manufacturer: Generic
[    1.824379] usb 2-4: SerialNumber: 20100201396000000
[    1.899915] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.899930] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.900629] ata1.00: ATA-9: WDC WD5000LPVX-00V0TT0, 01.01A01, max UDMA/133
[    1.900631] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.901387] ata1.00: configured for UDMA/133
[    1.901655] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-0 1A01 PQ: 0 ANSI: 5
[    1.901819] ata2.00: ATAPI: HL-DT-ST DVDRAM GUC0N, T.02, max UDMA/133
[    1.901964] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.902002] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.902005] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.902022] sd 0:0:0:0: [sda] Write Protect is off
[    1.902024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.902055] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.903130] ata2.00: configured for UDMA/133
[    1.904576] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUC0N     T.02 PQ: 0 ANSI: 5
[    1.933389] random: fast init done
[    1.933467] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.933481] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.933484] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.952004] usb 2-6: new high-speed USB device number 4 using xhci_hcd
[    1.964559] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.964561] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.964722] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.964803] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.993228]  sda: sda1 sda2 sda3 sda4 sda5
[    1.993973] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.048052] tsc: Refined TSC clocksource calibration: 2394.456 MHz
[    2.048059] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c236f90, max_idle_ns: 440795217409 ns
[    2.139002] usb 2-6: New USB device found, idVendor=0bda, idProduct=579a
[    2.139004] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.139006] usb 2-6: Product: Lenovo EasyCamera
[    2.139007] usb 2-6: Manufacturer: J58F5583G
[    2.139008] usb 2-6: SerialNumber: 200901010001
[    2.198890] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03)
[    2.213603] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a.
[    2.228516] psmouse serio1: elantech: Elan sample query result 05, 20, 97
[    2.268056] usb 2-7: new full-speed USB device number 5 using xhci_hcd
[    2.322053] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[    2.417117] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
[    2.417119] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.421679] hidraw: raw HID events driver (C) Jiri Kosina
[    2.423871] usbcore: registered new interface driver rtsx_usb
[    2.424971] usbcore: registered new interface driver usbhid
[    2.424972] usbhid: USB HID core driver
[    2.426744] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:046D:C52F.0001/input/input7
[    2.427347] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[    2.427491] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52F.0002/input/input8
[    2.484239] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[    2.931155] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.072069] clocksource: Switched to clocksource tsc
[    4.056997] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.164403] random: crng init done
[    4.164404] random: 7 urandom warning(s) missed due to ratelimiting
[    4.193540] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    4.212113] systemd[1]: Detected architecture x86-64.
[    4.229338] systemd[1]: Set hostname to <B70-80>.
[    7.122162] systemd[1]: Created slice System Slice.
[    7.122302] systemd[1]: Created slice User and Session Slice.
[    7.122379] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.122415] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.122452] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.122539] systemd[1]: Listening on Journal Audit Socket.
[    7.122574] systemd[1]: Listening on udev Kernel Socket.
[    7.704673] lp: driver loaded but no devices found
[    7.730821] ppdev: user-space parallel port driver
[    7.745097] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[    9.141844] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.364174] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    9.364376] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.449127] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
[    9.769155] Intel(R) Wireless WiFi driver for Linux
[    9.769156] Copyright(c) 2003- 2015 Intel Corporation
[    9.793887] iwlwifi 0000:03:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
[    9.872752] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    9.872753] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    9.872754] RAPL PMU: hw unit of domain package 2^-14 Joules
[    9.872754] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    9.872755] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   10.100666] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[   10.122499] iwlwifi 0000:03:00.0: base HW address: e4:f8:9c:13:f4:6b
[   10.265248] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   10.402328] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   10.619609] AVX2 version of gcm_enc/dec engaged.
[   10.619610] AES CTR mode by8 optimization enabled
[   11.359170] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   11.477243] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[   11.477302] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[   11.477358] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[   11.477416] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[   11.477474] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[   11.766622] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[   11.766921] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   11.766923] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.766924] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   11.766926] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
[   11.766927] snd_hda_codec_conexant hdaudioC1D0:    inputs:
[   11.766928] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
[   11.766930] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
[   11.767713] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
[   11.770031] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[   11.770101] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[   11.821536] Bluetooth: Core ver 2.22
[   11.821554] NET: Registered protocol family 31
[   11.821555] Bluetooth: HCI device and connection manager initialized
[   11.821558] Bluetooth: HCI socket layer initialized
[   11.821559] Bluetooth: L2CAP socket layer initialized
[   11.821564] Bluetooth: SCO socket layer initialized
[   12.013777] intel_rapl: Found RAPL domain package
[   12.013779] intel_rapl: Found RAPL domain core
[   12.013779] intel_rapl: Found RAPL domain uncore
[   12.013780] intel_rapl: Found RAPL domain dram
[   12.013782] intel_rapl: RAPL package 0 domain package locked by BIOS
[   12.013786] intel_rapl: RAPL package 0 domain dram locked by BIOS
[   12.063282] media: Linux media interface: v0.10
[   12.200303] usbcore: registered new interface driver btusb
[   12.213020] Bluetooth: hci0: read Intel version: 3707100100012d0d00
[   12.232132] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
[   12.340886] Linux video capture interface: v2.00
[   12.375988] Bluetooth: hci0: Intel firmware patch completed and activated
[   12.745208] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:579a)
[   12.747980] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[   12.747982] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
[   12.747983] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
[   12.748067] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input17
[   12.748129] usbcore: registered new interface driver uvcvideo
[   12.748130] USB Video Class driver (1.1.1)
[   14.970146] Adding 8788988k swap on /dev/sda2.  Priority:-2 extents:1 across:8788988k FS
[   16.218981] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   17.610060] systemd-journald[276]: Received request to flush runtime journal from PID 1
[   17.621073] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   25.880841] audit: type=1400 audit(1535488753.876:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=788 comm="apparmor_parser"
[   25.880846] audit: type=1400 audit(1535488753.876:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=788 comm="apparmor_parser"
[   25.880848] audit: type=1400 audit(1535488753.876:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=788 comm="apparmor_parser"
[   25.881671] audit: type=1400 audit(1535488753.876:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=784 comm="apparmor_parser"
[   25.881675] audit: type=1400 audit(1535488753.876:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=784 comm="apparmor_parser"
[   25.881676] audit: type=1400 audit(1535488753.876:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=784 comm="apparmor_parser"
[   25.881678] audit: type=1400 audit(1535488753.876:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=784 comm="apparmor_parser"
[   25.882578] audit: type=1400 audit(1535488753.876:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=789 comm="apparmor_parser"
[   25.883252] audit: type=1400 audit(1535488753.876:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=787 comm="apparmor_parser"
[   25.884265] audit: type=1400 audit(1535488753.880:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=790 comm="apparmor_parser"
[   37.162738] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   37.162740] Bluetooth: BNEP filters: protocol multicast
[   37.162744] Bluetooth: BNEP socket layer initialized
[   41.442687] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   41.569915] r8169 0000:02:00.0 enp2s0: link down
[   41.569995] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   41.628396] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   41.791889] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   41.855098] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   45.073396] wlp3s0: authenticate with a0:64:8f:38:b2:c9
[   45.078197] wlp3s0: send auth to a0:64:8f:38:b2:c9 (try 1/3)
[   45.079451] wlp3s0: authenticated
[   45.080024] wlp3s0: associate with a0:64:8f:38:b2:c9 (try 1/3)
[   45.081090] wlp3s0: RX AssocResp from a0:64:8f:38:b2:c9 (capab=0x11 status=0 aid=6)
[   45.082244] wlp3s0: associated
[   45.114731] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   45.159410] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by a0:64:8f:38:b2:c9
[   47.932026] Bluetooth: RFCOMM TTY layer initialized
[   47.932032] Bluetooth: RFCOMM socket layer initialized
[   47.932036] Bluetooth: RFCOMM ver 1.11
[   51.954844] rfkill: input handler disabled

f.vuilliomenet · Le 28/08/2018, à 22:55

j'ai refais lcommande : sudo blkid -o list

device                            fs_type      label         mount point                           UUID
---------------------------------------------------------------------------------------------------------------------------------------
/dev/loop0                        squashfs                   /snap/gnome-characters/103            
/dev/loop1                        squashfs                   /snap/gnome-logs/37                   
/dev/loop2                        squashfs                   /snap/core/4917                       
/dev/loop3                        squashfs                   /snap/gnome-3-26-1604/70              
/dev/loop4                        squashfs                   /snap/gnome-system-monitor/51         
/dev/loop5                        squashfs                   /snap/gnome-calculator/180            
/dev/loop6                        squashfs                   /snap/gtk-common-themes/319           
/dev/loop7                        squashfs                   /snap/core/5145                       
/dev/sda1                         vfat                       /boot/efi                             E256-2EC8
/dev/sda2                         swap                       [SWAP]                                3468efa5-c2b8-46a1-b3bf-40faf8ad87c8
/dev/sda3                         ext4                       /                                     0622aaec-ac6d-4d65-b7af-510a467492fc
/dev/sda4                         ext4                       /var                                  ffe3c2fd-e560-46a3-8911-90fd051965ba
/dev/sda5                         ext4                       /home                                 ac446bdf-071a-4aa6-b506-0d43153c4209
/dev/loop8                        squashfs                   /snap/pdfmixtool/242                  
/dev/loop9                        squashfs                   /snap/gnome-logs/40                   
/dev/loop10                       squashfs                   /snap/gnome-calculator/199            
/dev/loop11                       squashfs                   /snap/gnome-system-monitor/54         
/dev/loop12                       squashfs                   /snap/gnome-characters/117

Est-ce que quelqu'un sait ce que c'est ces /dev/loopXX qui sont lié a des /snap/
merci d'avance

f.vuilliomenet · Le 28/08/2018, à 23:18

echange desfichier snap par des deb

f.vuilliomenet · Le 28/08/2018, à 23:32

J'ai enlver quelque paquet snap =pas d’effet

device                                       fs_type         label            mount point                                      UUID
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
/dev/loop0                                   squashfs                         /snap/gnome-characters/103                       
/dev/loop1                                   squashfs                         /snap/core/4917                                  
/dev/loop2                                   squashfs                         /snap/gnome-3-26-1604/70                         
/dev/loop3                                   squashfs                         /snap/gtk-common-themes/319                      
/dev/loop4                                   squashfs                         /snap/core/5145                                  
/dev/loop5                                   squashfs                         /snap/gnome-characters/117                       
/dev/sda1                                    vfat                             /boot/efi                                        E256-2EC8
/dev/sda2                                    swap                             [SWAP]                                           3468efa5-c2b8-46a1-b3bf-40faf8ad87c8
/dev/sda3                                    ext4                             /                                                0622aaec-ac6d-4d65-b7af-510a467492fc
/dev/sda4                                    ext4                             /var                                             ffe3c2fd-e560-46a3-8911-90fd051965ba
/dev/sda5                                    ext4                             /home                                            ac446bdf-071a-4aa6-b506-0d43153c4209

par contre il doit y avoir un truc avec le bluetooth

[   20.345559] audit: type=1400 audit(1535491194.340:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=746 comm="apparmor_parser"
[   38.590095] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   38.590097] Bluetooth: BNEP filters: protocol multicast
[   38.590101] Bluetooth: BNEP socket layer initialized

et

[   47.610491] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   60.772474] Bluetooth: RFCOMM TTY layer initialized
[   60.772478] Bluetooth: RFCOMM socket layer initialized
[   60.772483] Bluetooth: RFCOMM ver 1.11
[   69.649662] rfkill: input handler disabled

Dernière modification par f.vuilliomenet (Le 28/08/2018, à 23:32)

f.vuilliomenet · Le 28/08/2018, à 23:43

j'ai refais un cat /etc/fstab

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda3 during installation
UUID=0622aaec-ac6d-4d65-b7af-510a467492fc /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=E256-2EC8  /boot/efi       vfat    umask=0077      0       1
# /home was on /dev/sda5 during installation
UUID=ac446bdf-071a-4aa6-b506-0d43153c4209 /home           ext4    defaults        0       2
# /var was on /dev/sda4 during installation
UUID=ffe3c2fd-e560-46a3-8911-90fd051965ba /var            ext4    defaults        0       2
# swap was on /dev/sda2 during installation
UUID=3468efa5-c2b8-46a1-b3bf-40faf8ad87c8 none            swap    sw              0       0

NicoApi73 · Le 29/08/2018, à 07:57

Bonjour,

Non, il n'y a rien de spécial avec le BlueTooth

Mornagest · Le 29/08/2018, à 10:13

f.vuilliomenet a écrit :

echange desfichier snap par des deb

As-tu fait un essai sur ce sujet ?

Je n'ai pas Gnome mais Xfce, c'est probablement la raison pour laquelle je n'ai pas ces /dev/loopX qui traînent dans mon blkid...

f.vuilliomenet · Le 29/08/2018, à 16:04

oui j'ai échanger 2 app de snap à deb mais cela ne change rien
donc je ne pense pas que c'est cela qui pose problème
mais par défaut je vais faire attention a utiliser des source deb

f.vuilliomenet · Le 29/08/2018, à 23:03

Résumé : Installe Ubuntu 18.04 avec un démarrage > 2 minutes qui viennent surement d'erreur lors de l'installation de base
Pour réduire le temps démarrage j'ai refais l’installation complète
Modification du BIOS pour l'utilisation du boot UEFI
Installation Ubuntu 18.04.1
partitionnement manuel du type
/UEFI =1GB
/var =10GB
swap =9GB
/home =900GB
/ =80GB
sans LVM
Minimiser l'installation de paquet snap
Ce qu'il reste a faire:

sudo systemctl disable NetworkManager-wait-online.service
sudo systemctl disable apt-daily.service
sudo systemctl disable apt-daily-upgrade.service.

Résultat:

fabrice@B70-80:~$ systemd-analyze
Startup finished in 3.602s (kernel) + 55.830s (userspace) = 59.433s
graphical.target reached after 54.536s in userspace

fabrice@B70-80:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x2b, date = 2018-03-22
[    0.000000] Linux version 4.15.0-33-generic (buildd@lcy01-amd64-024) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #36-Ubuntu SMP Wed Aug 15 16:00:05 UTC 2018 (Ubuntu 4.15.0-33.36-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=UUID=cbe07cf9-eb23-44d2-93e4-885a4cb86f62 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096f79fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000096f7a000-0x0000000097879fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009787a000-0x000000009c48efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009c48f000-0x000000009ce7efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x95eb2018-0x95ec2057] usable ==> usable
[    0.000000] e820: update [mem 0x95eb2018-0x95ec2057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000085fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000086000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000095eb2017] usable
[    0.000000] reserve setup_data: [mem 0x0000000095eb2018-0x0000000095ec2057] usable
[    0.000000] reserve setup_data: [mem 0x0000000095ec2058-0x0000000096f79fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000096f7a000-0x0000000097879fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009787a000-0x000000009c48efff] usable
[    0.000000] reserve setup_data: [mem 0x000000009c48f000-0x000000009ce7efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000025effffff] usable
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  SMBIOS=0x9c708000  ACPI 2.0=0x9cffe014 
[    0.000000] secureboot: Secure boot enabled
[    0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 80MR/Lenovo B70-80, BIOS D1CN06WW 05/18/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 009D000000 mask 7FFF000000 uncachable
[    0.000000]   2 base 009E000000 mask 7FFE000000 uncachable
[    0.000000]   3 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 14800M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 80000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x19d33f000, 0x19d33ffff] PGTABLE
[    0.000000] BRK [0x19d340000, 0x19d340fff] PGTABLE
[    0.000000] BRK [0x19d341000, 0x19d341fff] PGTABLE
[    0.000000] BRK [0x19d342000, 0x19d342fff] PGTABLE
[    0.000000] BRK [0x19d343000, 0x19d343fff] PGTABLE
[    0.000000] BRK [0x19d344000, 0x19d344fff] PGTABLE
[    0.000000] BRK [0x19d345000, 0x19d345fff] PGTABLE
[    0.000000] BRK [0x19d346000, 0x19d346fff] PGTABLE
[    0.000000] BRK [0x19d347000, 0x19d347fff] PGTABLE
[    0.000000] BRK [0x19d348000, 0x19d348fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3cb14000-0x3fffdfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000009CFD0188 0000D4 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009CFF6000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000009CFE0000 00FE6F (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009CF7A000 000040
[    0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009CFFA000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000009CFF8000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000009CFF4000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000009CFF2000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x000000009CFF0000 000224 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDC000 00340B (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDB000 000539 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD4000 005C31 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000009CFFB000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000009CFF7000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000009CFF3000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDA000 000B74 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000009CFF9000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SLIC 0x000000009CFF1000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000009CFF5000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000009CFD3000 0000F8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: CSRT 0x000000009CFD2000 0000C4 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000009CFD1000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000009CFCF000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x25efd5000-0x25effffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000025effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000085fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000096f79fff]
[    0.000000]   node   0: [mem 0x000000009787a000-0x000000009c48efff]
[    0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000025effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
[    0.000000] On node 0 totalpages: 2075412
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3972 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9903 pages used for memmap
[    0.000000]   DMA32 zone: 633744 pages, LIFO batch:31
[    0.000000]   Normal zone: 22464 pages used for memmap
[    0.000000]   Normal zone: 1437696 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00086000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x95eb2000-0x95eb2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x95ec2000-0x95ec2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x96f7a000-0x97879fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9c48f000-0x9ce7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9dffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2042959
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=UUID=cbe07cf9-eb23-44d2-93e4-885a4cb86f62 ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7970704K/8301648K available (12300K kernel code, 2470K rwdata, 4244K rodata, 2408K init, 2416K bss, 330944K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39121 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 39
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.000000] DMAR: RMRR base: 0x0000009ce24000 end: 0x0000009ce43fff
[    0.000000] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[    0.000000] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[    0.000000] DMAR: ANDD device: 2 name: \_SB.PCI0.SDHC
[    0.000000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 2394.539 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.07 BogoMIPS (lpj=9578156)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.028213] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.028993] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.029031] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029057] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029265] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.029265] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.029270] mce: CPU supports 7 MCE banks
[    0.029286] process: using mwait in idle threads
[    0.029289] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.029289] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.029291] Spectre V2 : Mitigation: Full generic retpoline
[    0.029291] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.029292] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.029293] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.035558] Freeing SMP alternatives memory: 36K
[    0.044993] TSC deadline timer enabled
[    0.044995] smpboot: CPU0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.045055] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.045100] ... version:                3
[    0.045100] ... bit width:              48
[    0.045101] ... generic registers:      4
[    0.045102] ... value mask:             0000ffffffffffff
[    0.045102] ... max period:             00007fffffffffff
[    0.045103] ... fixed-purpose events:   3
[    0.045103] ... event mask:             000000070000000f
[    0.045135] Hierarchical SRCU implementation.
[    0.046129] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.046142] smp: Bringing up secondary CPUs ...
[    0.046214] x86: Booting SMP configuration:
[    0.046215] .... node  #0, CPUs:      #1 #2 #3
[    0.048510] smp: Brought up 1 node, 4 CPUs
[    0.048510] smpboot: Max logical packages: 1
[    0.048510] smpboot: Total of 4 processors activated (19156.31 BogoMIPS)
[    0.052252] devtmpfs: initialized
[    0.052252] x86/mm: Memory block size: 128MB
[    0.052705] evm: security.selinux
[    0.052705] evm: security.SMACK64
[    0.052706] evm: security.SMACK64EXEC
[    0.052706] evm: security.SMACK64TRANSMUTE
[    0.052707] evm: security.SMACK64MMAP
[    0.052707] evm: security.apparmor
[    0.052708] evm: security.ima
[    0.052708] evm: security.capability
[    0.052721] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
[    0.052721] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.052721] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.052721] pinctrl core: initialized pinctrl subsystem
[    0.052721] RTC time: 20:42:07, date: 08/29/18
[    0.052721] NET: Registered protocol family 16
[    0.052721] audit: initializing netlink subsys (disabled)
[    0.052721] audit: type=2000 audit(1535575327.052:1): state=initialized audit_enabled=0 res=1
[    0.052721] cpuidle: using governor ladder
[    0.052721] cpuidle: using governor menu
[    0.052721] Simple Boot Flag at 0x44 set to 0x1
[    0.052721] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.052721] ACPI: bus type PCI registered
[    0.052721] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.052721] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.052721] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.052721] PCI: Using configuration type 1 for base access
[    0.053190] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.053190] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.053190] ACPI: Added _OSI(Module Device)
[    0.053190] ACPI: Added _OSI(Processor Device)
[    0.053190] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.053190] ACPI: Added _OSI(Processor Aggregator Device)
[    0.053190] ACPI: Added _OSI(Linux-Dell-Video)
[    0.056021] ACPI: Executed 7 blocks of module-level executable AML code
[    0.064029] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.065469] ACPI: Dynamic OEM Table Load:
[    0.065477] ACPI: SSDT 0xFFFF91CC5494AC00 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20121220)
[    0.065692] ACPI: Dynamic OEM Table Load:
[    0.065692] ACPI: SSDT 0xFFFF91CC54E82800 0005AA (v02 PmRef  ApIst    00003000 INTL 20121220)
[    0.068172] ACPI: Dynamic OEM Table Load:
[    0.068179] ACPI: SSDT 0xFFFF91CC54908400 000119 (v02 PmRef  ApCst    00003000 INTL 20121220)
[    0.068934] ACPI: EC: EC started
[    0.068934] ACPI: EC: interrupt blocked
[    0.069415] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.069417] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.069419] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.069419] ACPI: Interpreter enabled
[    0.069465] ACPI: (supports S0 S3 S4 S5)
[    0.069466] ACPI: Using IOAPIC for interrupt routing
[    0.069505] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.069942] ACPI: GPE 0x62 active on init
[    0.069957] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.088261] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.088267] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.089517] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.089518] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.090471] PCI host bridge to bus 0000:00
[    0.090474] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.090475] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.090477] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.090478] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.090480] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.090481] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.090482] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.090484] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.090485] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.090486] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.090488] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.090489] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.090490] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.090492] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.090493] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.090494] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
[    0.090496] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.090505] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.090835] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.090847] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[    0.090853] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.090857] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.090871] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.091199] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.091210] pci 0000:00:03.0: reg 0x10: [mem 0xc1210000-0xc1213fff 64bit]
[    0.091559] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.091578] pci 0000:00:14.0: reg 0x10: [mem 0xc1200000-0xc120ffff 64bit]
[    0.091634] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.091942] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.091964] pci 0000:00:16.0: reg 0x10: [mem 0xc121b000-0xc121b01f 64bit]
[    0.092033] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.092346] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.092364] pci 0000:00:1b.0: reg 0x10: [mem 0xc1214000-0xc1217fff 64bit]
[    0.092420] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.092724] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.092791] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.093159] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.093230] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.093599] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[    0.093669] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.094040] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[    0.096000] pci 0000:00:1d.0: reg 0x10: [mem 0xc1219000-0xc12193ff]
[    0.102658] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.102658] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.102658] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.102658] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.102658] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.102658] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.102658] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.102658] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.102658] pci 0000:00:1f.2: reg 0x24: [mem 0xc1218000-0xc12187ff]
[    0.102658] pci 0000:00:1f.2: PME# supported from D3hot
[    0.102658] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.102658] pci 0000:00:1f.3: reg 0x10: [mem 0xc121a000-0xc121a0ff 64bit]
[    0.102658] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.104257] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.104329] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.104359] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.104386] pci 0000:02:00.0: reg 0x18: [mem 0xc1104000-0xc1104fff 64bit]
[    0.104404] pci 0000:02:00.0: reg 0x20: [mem 0xc1100000-0xc1103fff 64bit]
[    0.104504] pci 0000:02:00.0: supports D1 D2
[    0.104505] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.116027] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.116030] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.116033] pci 0000:00:1c.2:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.116304] pci 0000:03:00.0: [8086:08b4] type 00 class 0x028000
[    0.116412] pci 0000:03:00.0: reg 0x10: [mem 0xc1000000-0xc1001fff 64bit]
[    0.116705] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.128167] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.128172] pci 0000:00:1c.3:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.129611] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.129685] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.129756] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.129826] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.129897] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.129966] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.130036] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.130106] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.130551] ACPI: EC: interrupt unblocked
[    0.130559] ACPI: EC: event unblocked
[    0.130578] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.130580] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.130821] SCSI subsystem initialized
[    0.130830] libata version 3.00 loaded.
[    0.130830] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.130830] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.130830] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.130830] vgaarb: loaded
[    0.130830] ACPI: bus type USB registered
[    0.130830] usbcore: registered new interface driver usbfs
[    0.130830] usbcore: registered new interface driver hub
[    0.130830] usbcore: registered new device driver usb
[    0.130830] EDAC MC: Ver: 3.0.0
[    0.130830] Registered efivars operations
[    0.156475] PCI: Using ACPI for IRQ routing
[    0.162942] PCI: pci_cache_line_size set to 64 bytes
[    0.163261] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.163263] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    0.163264] e820: reserve RAM buffer [mem 0x95eb2018-0x97ffffff]
[    0.163265] e820: reserve RAM buffer [mem 0x96f7a000-0x97ffffff]
[    0.163266] e820: reserve RAM buffer [mem 0x9c48f000-0x9fffffff]
[    0.163267] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.163268] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[    0.163367] NetLabel: Initializing
[    0.163368] NetLabel:  domain hash size = 128
[    0.163368] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.163382] NetLabel:  unlabeled traffic allowed by default
[    0.163398] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.163398] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.164021] clocksource: Switched to clocksource hpet
[    0.174497] VFS: Disk quotas dquot_6.6.0
[    0.174513] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.174615] AppArmor: AppArmor Filesystem Enabled
[    0.174645] pnp: PnP ACPI init
[    0.175353] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.175357] system 00:00: [io  0xffff] has been reserved
[    0.175359] system 00:00: [io  0xffff] has been reserved
[    0.175361] system 00:00: [io  0xffff] has been reserved
[    0.175363] system 00:00: [io  0x1800-0x18fe] could not be reserved
[    0.175365] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.175371] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.175427] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.175475] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.175479] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.175545] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.175601] pnp 00:04: Plug and Play ACPI device, IDs ETD0624 ETD0000 PNP0f13 (active)
[    0.176031] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.176033] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.176035] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.176037] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.176038] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.176040] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.176042] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.176043] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.176045] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.176047] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.176049] system 00:05: [mem 0xa0010000-0xa001ffff] has been reserved
[    0.176050] system 00:05: [mem 0xa0000000-0xa000ffff] has been reserved
[    0.176054] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.176406] pnp: PnP ACPI: found 6 devices
[    0.182394] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.182406] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.182409] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.182411] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.182430] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
[    0.182439] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.182442] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.182445] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.182447] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.182451] pci 0000:00:1c.0:   bridge window [mem 0xa0100000-0xa02fffff]
[    0.182454] pci 0000:00:1c.0:   bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.182459] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.182461] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.182465] pci 0000:00:1c.2:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.182471] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.182475] pci 0000:00:1c.3:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.182483] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.182484] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.182486] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.182487] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.182488] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.182490] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.182491] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.182493] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.182494] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.182496] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.182497] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.182498] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.182500] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.182501] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.182503] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.182504] pci_bus 0000:00: resource 19 [mem 0xa0000000-0xfeafffff window]
[    0.182506] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.182507] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
[    0.182509] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.182510] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.182512] pci_bus 0000:02: resource 1 [mem 0xc1100000-0xc11fffff]
[    0.182513] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc10fffff]
[    0.182653] NET: Registered protocol family 2
[    0.182859] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.182978] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.183148] TCP: Hash tables configured (established 65536 bind 65536)
[    0.183184] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.183209] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.183266] NET: Registered protocol family 1
[    0.183278] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.183376] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.183378] pci 0000:00:14.0: PCI INT A: not connected
[    0.204271] PCI: CLS 64 bytes, default 64
[    0.204306] Unpacking initramfs...
[    1.031949] Freeing initrd memory: 54184K
[    1.032038] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
[    1.032042] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
[    1.032059] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.032061] software IO TLB [mem 0x8f84e000-0x9384e000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    1.032251] Scanning for low memory corruption every 60 seconds
[    1.032850] Initialise system trusted keyrings
[    1.032857] Key type blacklist registered
[    1.032891] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.033961] zbud: loaded
[    1.034427] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.034548] fuse init (API version 7.26)
[    1.035748] Key type asymmetric registered
[    1.035749] Asymmetric key parser 'x509' registered
[    1.035776] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.035808] io scheduler noop registered
[    1.035810] io scheduler deadline registered
[    1.035848] io scheduler cfq registered (default)
[    1.036526] pcieport 0000:00:1c.0: Signaling PME with IRQ 42
[    1.036541] pcieport 0000:00:1c.2: Signaling PME with IRQ 43
[    1.036555] pcieport 0000:00:1c.3: Signaling PME with IRQ 44
[    1.036573] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.036638] efifb: probing for efifb
[    1.036648] efifb: framebuffer at 0xb0000000, using 5628k, total 5625k
[    1.036649] efifb: mode is 1600x900x32, linelength=6400, pages=1
[    1.036649] efifb: scrolling: redraw
[    1.036651] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.036735] Console: switching to colour frame buffer device 200x56
[    1.036755] fb0: EFI VGA frame buffer device
[    1.036762] intel_idle: MWAIT substates: 0x11142120
[    1.036763] intel_idle: v0.4.1 model 0x3D
[    1.036932] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.037490] ACPI: AC Adapter [ADP0] (off-line)
[    1.037548] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.037566] ACPI: Lid Switch [LID0]
[    1.037597] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.037612] ACPI: Power Button [PWRB]
[    1.037642] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.037656] ACPI: Power Button [PWRF]
[    1.038050] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.041487] Linux agpgart interface v0.103
[    1.042827] loop: module loaded
[    1.042971] libphy: Fixed MDIO Bus: probed
[    1.042972] tun: Universal TUN/TAP device driver, 1.6
[    1.043000] PPP generic driver version 2.4.2
[    1.043031] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.043032] ehci-pci: EHCI PCI platform driver
[    1.043162] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.043167] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.043177] ehci-pci 0000:00:1d.0: debug port 2
[    1.047065] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.047078] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1219000
[    1.060067] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.060117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.060118] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.060120] usb usb1: Product: EHCI Host Controller
[    1.060121] usb usb1: Manufacturer: Linux 4.15.0-33-generic ehci_hcd
[    1.060123] usb usb1: SerialNumber: 0000:00:1d.0
[    1.060327] hub 1-0:1.0: USB hub found
[    1.060332] hub 1-0:1.0: 2 ports detected
[    1.060486] ehci-platform: EHCI generic platform driver
[    1.060500] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.060507] ohci-pci: OHCI PCI platform driver
[    1.060516] ohci-platform: OHCI generic platform driver
[    1.060522] uhci_hcd: USB Universal Host Controller Interface driver
[    1.060650] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.060651] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.060673] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.060677] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.061739] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[    1.061743] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.061853] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.061855] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.061856] usb usb2: Product: xHCI Host Controller
[    1.061858] usb usb2: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
[    1.061859] usb usb2: SerialNumber: 0000:00:14.0
[    1.062038] hub 2-0:1.0: USB hub found
[    1.062050] hub 2-0:1.0: 11 ports detected
[    1.067167] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.067171] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.067174] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.067204] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.067205] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.067207] usb usb3: Product: xHCI Host Controller
[    1.067208] usb usb3: Manufacturer: Linux 4.15.0-33-generic xhci-hcd
[    1.067209] usb usb3: SerialNumber: 0000:00:14.0
[    1.067404] hub 3-0:1.0: USB hub found
[    1.067411] hub 3-0:1.0: 4 ports detected
[    1.069128] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.083225] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.083228] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.083423] mousedev: PS/2 mouse device common for all mice
[    1.083854] rtc_cmos 00:01: RTC can wake from S4
[    1.083862] rtc_cmos: probe of 00:01 failed with error -16
[    1.083876] i2c /dev entries driver
[    1.083924] device-mapper: uevent: version 1.0.3
[    1.083975] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.083982] intel_pstate: Intel P-state driver initializing
[    1.084158] ledtrig-cpu: registered to indicate activity on CPUs
[    1.084160] EFI Variables Facility v0.08 2004-May-17
[    1.097213] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.109148] NET: Registered protocol family 10
[    1.111914] Segment Routing with IPv6
[    1.111929] NET: Registered protocol family 17
[    1.111955] Key type dns_resolver registered
[    1.112156] RAS: Correctable Errors collector initialized.
[    1.112184] microcode: sig=0x306d4, pf=0x40, revision=0x2b
[    1.112221] microcode: Microcode Update Driver: v2.2.
[    1.112229] sched_clock: Marking stable (1112217716, 0)->(1090449996, 21767720)
[    1.112451] registered taskstats version 1
[    1.112473] Loading compiled-in X.509 certificates
[    1.114444] Loaded X.509 cert 'Build time autogenerated kernel key: b2b2adbda3eef7b219e699c1b87c022096150517'
[    1.116269] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[    1.116289] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[    1.116298] Loaded UEFI:db cert 'Mocca: eee4ae78c24bf4a5488b6b77c611edde' linked to secondary sys keyring
[    1.118799] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[    1.119498] zswap: loaded using pool lzo/zbud
[    1.122374] Key type big_key registered
[    1.122377] Key type trusted registered
[    1.123572] Key type encrypted registered
[    1.123574] AppArmor: AppArmor sha1 policy hashing enabled
[    1.123578] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.123590] evm: HMAC attrs: 0x1
[    1.124077]   Magic number: 14:0:752
[    1.124096] tty ttyS3: hash matches
[    1.124139] hctosys: unable to open rtc device (rtc0)
[    1.124218] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.124219] EDD information not available.
[    1.124252] Lockdown: Hibernation is restricted; see man kernel_lockdown.7
[    1.138038] ACPI: Battery Slot [BAT0] (battery present)
[    1.396021] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.400022] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[    1.458475] Freeing unused kernel memory: 2408K
[    1.480051] Write protecting the kernel read-only data: 20480k
[    1.481183] Freeing unused kernel memory: 2008K
[    1.484591] Freeing unused kernel memory: 1900K
[    1.489564] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.489564] x86/mm: Checking user space page tables
[    1.494437] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.552484] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
[    1.552486] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.552637] hub 1-1:1.0: USB hub found
[    1.552727] hub 1-1:1.0: 8 ports detected
[    1.554239] usb 2-3: New USB device found, idVendor=046d, idProduct=c52f
[    1.554240] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.554241] usb 2-3: Product: USB Receiver
[    1.554242] usb 2-3: Manufacturer: Logitech
[    1.570560] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.570568] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.581095] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x        (ptrval), 68:f7:28:ee:44:2e, XID 10900800 IRQ 46
[    1.581097] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.593093] ahci 0000:00:1f.2: version 3.0
[    1.594125] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.603413] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[    1.603417] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.604022] scsi host0: ahci
[    1.604136] scsi host1: ahci
[    1.604223] scsi host2: ahci
[    1.604309] scsi host3: ahci
[    1.604355] ata1: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218100 irq 47
[    1.604357] ata2: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218180 irq 47
[    1.604358] ata3: DUMMY
[    1.604359] ata4: DUMMY
[    1.617631] [drm] Memory usable by graphics device = 4096M
[    1.617645] checking generic (b0000000 57f000) vs hw (b0000000 10000000)
[    1.617645] fb: switching to inteldrmfb from EFI VGA
[    1.617665] Console: switching to colour dummy device 80x25
[    1.617766] [drm] Replacing VGA console driver
[    1.623770] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.623771] [drm] Driver supports precise vblank timestamp query.
[    1.625866] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.631978] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    1.633849] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.634148] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.667347] fbcon: inteldrmfb (fb0) is primary device
[    1.667392] Console: switching to colour frame buffer device 200x56
[    1.667413] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.680008] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[    1.828329] usb 2-4: New USB device found, idVendor=0bda, idProduct=0129
[    1.828331] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.828332] usb 2-4: Product: USB2.0-CRW
[    1.828333] usb 2-4: Manufacturer: Generic
[    1.828335] usb 2-4: SerialNumber: 20100201396000000
[    1.919818] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.919834] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.921987] ata2.00: ATAPI: HL-DT-ST DVDRAM GUC0N, T.02, max UDMA/133
[    1.924828] ata2.00: configured for UDMA/133
[    1.956070] usb 2-6: new high-speed USB device number 4 using xhci_hcd
[    2.036734] ata1.00: ATA-10: ST1000LM049-2GH172, SDM1, max UDMA/133
[    2.036736] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.048067] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[    2.048075] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c360c9e, max_idle_ns: 440795302742 ns
[    2.084252] random: fast init done
[    2.086253] ata1.00: configured for UDMA/133
[    2.086483] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM049-2GH1 SDM1 PQ: 0 ANSI: 5
[    2.086734] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.086765] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.086770] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.086858] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.086948] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.086951] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.086971] sd 0:0:0:0: [sda] Write Protect is off
[    2.086973] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.087005] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.088821] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUC0N     T.02 PQ: 0 ANSI: 5
[    2.143062] usb 2-6: New USB device found, idVendor=0bda, idProduct=579a
[    2.143064] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.143066] usb 2-6: Product: Lenovo EasyCamera
[    2.143067] usb 2-6: Manufacturer: J58F5583G
[    2.143068] usb 2-6: SerialNumber: 200901010001
[    2.152734]  sda: sda1 sda2 sda3 sda4 sda5
[    2.153126] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.156015] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.156016] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.156134] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.156209] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.224389] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03)
[    2.240552] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a.
[    2.256964] psmouse serio1: elantech: Elan sample query result 05, 20, 97
[    2.271994] usb 2-7: new full-speed USB device number 5 using xhci_hcd
[    2.348219] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[    2.420975] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
[    2.420977] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.425843] hidraw: raw HID events driver (C) Jiri Kosina
[    2.426244] usbcore: registered new interface driver rtsx_usb
[    2.429253] usbcore: registered new interface driver usbhid
[    2.429254] usbhid: USB HID core driver
[    2.430859] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:046D:C52F.0001/input/input7
[    2.430957] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[    2.431129] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52F.0002/input/input8
[    2.488325] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[    2.912269] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.072078] clocksource: Switched to clocksource tsc
[    3.824795] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.917132] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.936084] systemd[1]: Detected architecture x86-64.
[    3.938835] systemd[1]: Set hostname to <B70-80>.
[    3.964717] Lockdown: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
[    4.453422] random: crng init done
[    4.453423] random: 7 urandom warning(s) missed due to ratelimiting
[    5.073777] systemd[1]: Reached target Remote File Systems.
[    5.073988] systemd[1]: Created slice System Slice.
[    5.074048] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.074098] systemd[1]: Listening on Syslog Socket.
[    5.074207] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.074303] systemd[1]: Listening on Journal Audit Socket.
[    5.074360] systemd[1]: Listening on udev Control Socket.
[    5.315349] lp: driver loaded but no devices found
[    5.360617] ppdev: user-space parallel port driver
[    5.508737] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[    6.212056] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.326931] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
[    6.346950] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.347151] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.426105] Intel(R) Wireless WiFi driver for Linux
[    6.426106] Copyright(c) 2003- 2015 Intel Corporation
[    6.467967] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    6.467975] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    6.467976] RAPL PMU: hw unit of domain package 2^-14 Joules
[    6.467977] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    6.467978] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    6.540797] iwlwifi 0000:03:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
[    6.575994] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[    6.597136] iwlwifi 0000:03:00.0: base HW address: e4:f8:9c:13:f4:6b
[    6.756188] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    6.817553] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    6.938326] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.939781] AVX2 version of gcm_enc/dec engaged.
[    6.939784] AES CTR mode by8 optimization enabled
[    7.002147] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[    7.002216] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    7.002271] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    7.002313] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    7.002349] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    7.025792] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[    7.026109] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    7.026111] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.026112] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    7.026113] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
[    7.026114] snd_hda_codec_conexant hdaudioC1D0:    inputs:
[    7.026118] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
[    7.026119] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
[    7.026902] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
[    7.029185] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    7.029247] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[    7.596566] intel_rapl: Found RAPL domain package
[    7.596568] intel_rapl: Found RAPL domain core
[    7.596569] intel_rapl: Found RAPL domain uncore
[    7.596569] intel_rapl: Found RAPL domain dram
[    7.596571] intel_rapl: RAPL package 0 domain package locked by BIOS
[    7.596575] intel_rapl: RAPL package 0 domain dram locked by BIOS
[    7.798736] Bluetooth: Core ver 2.22
[    7.798753] NET: Registered protocol family 31
[    7.798754] Bluetooth: HCI device and connection manager initialized
[    7.798756] Bluetooth: HCI socket layer initialized
[    7.798758] Bluetooth: L2CAP socket layer initialized
[    7.798761] Bluetooth: SCO socket layer initialized
[    8.148348] usbcore: registered new interface driver btusb
[    8.161324] Bluetooth: hci0: read Intel version: 3707100100012d0d00
[    8.169368] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
[    8.196290] media: Linux media interface: v0.10
[    8.239202] Linux video capture interface: v2.00
[    8.290335] Bluetooth: hci0: Intel firmware patch completed and activated
[    8.413279] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:579a)
[    8.416042] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[    8.416043] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
[    8.416045] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
[    8.416117] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input17
[    8.416180] usbcore: registered new interface driver uvcvideo
[    8.416181] USB Video Class driver (1.1.1)
[    9.819723] Adding 8788988k swap on /dev/sda2.  Priority:-2 extents:1 across:8788988k FS
[   10.341984] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   11.023626] systemd-journald[269]: Received request to flush runtime journal from PID 1
[   11.933939] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   16.871417] audit: type=1400 audit(1535575343.864:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=761 comm="apparmor_parser"
[   16.871420] audit: type=1400 audit(1535575343.864:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=761 comm="apparmor_parser"
[   16.871422] audit: type=1400 audit(1535575343.864:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=761 comm="apparmor_parser"
[   16.871424] audit: type=1400 audit(1535575343.864:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=761 comm="apparmor_parser"
[   16.871425] audit: type=1400 audit(1535575343.864:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=761 comm="apparmor_parser"
[   16.871427] audit: type=1400 audit(1535575343.864:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=761 comm="apparmor_parser"
[   16.893917] audit: type=1400 audit(1535575343.888:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=760 comm="apparmor_parser"
[   16.893920] audit: type=1400 audit(1535575343.888:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=760 comm="apparmor_parser"
[   16.893922] audit: type=1400 audit(1535575343.888:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=760 comm="apparmor_parser"
[   16.893924] audit: type=1400 audit(1535575343.888:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=760 comm="apparmor_parser"
[   33.414512] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   33.414514] Bluetooth: BNEP filters: protocol multicast
[   33.414517] Bluetooth: BNEP socket layer initialized
[   35.912696] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   35.981889] r8169 0000:02:00.0 enp2s0: link down
[   35.982034] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   35.985265] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   36.138434] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   36.403194] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   39.667683] wlp3s0: authenticate with a0:64:8f:38:b2:c9
[   39.675447] wlp3s0: send auth to a0:64:8f:38:b2:c9 (try 1/3)
[   39.676637] wlp3s0: authenticated
[   39.683990] wlp3s0: associate with a0:64:8f:38:b2:c9 (try 1/3)
[   39.685108] wlp3s0: RX AssocResp from a0:64:8f:38:b2:c9 (capab=0x11 status=0 aid=2)
[   39.686501] wlp3s0: associated
[   39.688912] wlp3s0: Limiting TX power to 24 (24 - 0) dBm as advertised by a0:64:8f:38:b2:c9
[   39.806246] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   44.205518] Bluetooth: RFCOMM TTY layer initialized
[   44.205527] Bluetooth: RFCOMM socket layer initialized
[   44.205531] Bluetooth: RFCOMM ver 1.11
[   49.315768] rfkill: input handler disabled

Pour moi le but est atteint = boot<1minutes

f.vuilliomenet · Le 29/08/2018, à 23:07

merci a tous,
J'ai appris plein de chose.
A bientôt

Mornagest · Le 30/08/2018, à 09:46

Cool

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#26 Le 28/08/2018, à 16:10

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#27 Le 28/08/2018, à 16:12

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#28 Le 28/08/2018, à 16:25

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#29 Le 28/08/2018, à 17:37

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#30 Le 28/08/2018, à 17:44

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#31 Le 28/08/2018, à 18:03

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#32 Le 28/08/2018, à 18:05

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#33 Le 28/08/2018, à 21:04

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#34 Le 28/08/2018, à 22:21

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#35 Le 28/08/2018, à 22:45

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#36 Le 28/08/2018, à 22:55

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#37 Le 28/08/2018, à 23:18

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#38 Le 28/08/2018, à 23:32

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#39 Le 28/08/2018, à 23:43

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#40 Le 29/08/2018, à 07:57

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#41 Le 29/08/2018, à 10:13

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#42 Le 29/08/2018, à 16:04

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#43 Le 29/08/2018, à 23:03

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#44 Le 29/08/2018, à 23:07

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

#45 Le 30/08/2018, à 09:46

Re : [Résolu] Démarrage très lent Ubuntu 18.04.1

Pied de page des forums