Contenu | Rechercher | Menus

Annonce

T-shirt Seiche Cosmic, Série limitée

L'équipe des administrateurs et modérateurs du forum vous invite à prendre connaissance des nouvelles règles.
En cas de besoin, vous pouvez intervenir dans cette discussion.

Ubuntu 18.10
T-shirt Ubuntu-FR « Seiche Cosmique » en série limitée ! Prix spécial pré-vente (15€) jusqu'au 4 novembre 2018.

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 09/10/2018, à 17:50

Mouhasar

Problème d'installation

Bonjour,

J'avais windows sur mon PC et j'avais décider de le remplacé totalement par ubuntu 18.04
Sauf qu e après avoir booter mon clé USB ,j'ai lancé l'installation et j'ai choisi installer ubuntu sur tout le disque en supprimant windows.
A peine l'installation commencé, je vois une message d'erreur me notifiant : " errno 5"
Je demande si quelqu'un a déjà rencontré ce problème
Et je cherche des solutions possibles.
Merci d'avance

Hors ligne

#2 Le 09/10/2018, à 19:36

malbo

Re : Problème d'installation

Bonjour;
Je te prie de démarrer ce PC sur ta LiveUSB et sélectionnant "Essayer Ubuntu" (ça s'appelle "démarrer une session Live"). Depuis la session live, tu feras un Boot-Info et tu donneras l'URL de ce Boot-Info dans ta réponse.

Dernière modification par malbo (Le 09/10/2018, à 19:37)

En ligne

#3 Le 09/10/2018, à 20:32

Mouhasar

Re : Problème d'installation

malbo a écrit :

Bonjour;
Je te prie de démarrer ce PC sur ta LiveUSB et sélectionnant "Essayer Ubuntu" (ça s'appelle "démarrer une session Live"). Depuis la session live, tu feras un Boot-Info et tu donneras l'URL de ce Boot-Info dans ta réponse.


Voici L’URL que j' ai obtenue après avoir lancé boot info
http://paste.ubuntu.com/p/knj72NmYGy/

Hors ligne

#4 Le 09/10/2018, à 20:51

malbo

Re : Problème d'installation

Ton Boot-Info est là :

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => libparted MBR boot code is installed in the MBR of /dev/sda.
 => Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdb.
 => libparted MBR boot code is installed in the MBR of /dev/sdc.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.1 LTS
    Boot files:        /etc/fstab

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda6: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 6.03
    Boot sector info:  Syslinux looks at sector 65544 of /dev/sdb1 for its 
                       second stage. The integrity check of Syslinux failed. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

sdc1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.1 LTS
    Boot files:        /etc/fstab

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   195,312,594   195,310,547  83 Linux
/dev/sda2         195,313,662   625,141,759   429,828,098   5 Extended
/dev/sda5         195,313,664   619,282,431   423,968,768  83 Linux
/dev/sda6         619,284,480   625,141,759     5,857,280  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 14.4 GiB, 15472047104 bytes, 30218842 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *          2,048    30,218,841    30,216,794   b W95 FAT32


Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1               2,048   625,141,759   625,139,712  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/loop7                                              squashfs   
/dev/sda1        2245ebda-dc75-4740-9f6a-1f1713b0cd46   ext4       
/dev/sda5        a2c986b5-0b68-45f0-87d5-a4c6bb26b21e   ext4       
/dev/sda6        a7941554-f8fc-4a57-908d-ba0f47e73820   swap       
/dev/sdb1        C454-DF6C                              vfat       UBUNTU 18_0
/dev/sdc1        b46ead3a-13d7-4a1f-a107-5a0437e6c691   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Oct 10 02:26 ata-ST9320325AS_6VD0KFPH -> ../../sda
lrwxrwxrwx 1 root root 10 Oct 10 02:26 ata-ST9320325AS_6VD0KFPH-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct 10 02:26 ata-ST9320325AS_6VD0KFPH-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Oct 10 02:26 ata-ST9320325AS_6VD0KFPH-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Oct 10 02:26 ata-ST9320325AS_6VD0KFPH-part6 -> ../../sda6
lrwxrwxrwx 1 root root  9 Oct 10 02:26 ata-ST9320325AS_6VD0R3C7 -> ../../sdc
lrwxrwxrwx 1 root root 10 Oct 10 02:26 ata-ST9320325AS_6VD0R3C7-part1 -> ../../sdc1
lrwxrwxrwx 1 root root  9 Oct 10 00:03 ata-TSSTcorp_CDDVDW_TS-L633C_a1C3456789_LMNOP -> ../../sr0
lrwxrwxrwx 1 root root  9 Oct 10 02:26 usb-Kingston_DataTraveler_3.0_C81F660E893EF1B03603D00B-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Oct 10 02:26 usb-Kingston_DataTraveler_3.0_C81F660E893EF1B03603D00B-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 Oct 10 02:26 wwn-0x5000c5001b93590d -> ../../sda
lrwxrwxrwx 1 root root 10 Oct 10 02:26 wwn-0x5000c5001b93590d-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct 10 02:26 wwn-0x5000c5001b93590d-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Oct 10 02:26 wwn-0x5000c5001b93590d-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Oct 10 02:26 wwn-0x5000c5001b93590d-part6 -> ../../sda6
lrwxrwxrwx 1 root root  9 Oct 10 02:26 wwn-0x5000c5001bab37da -> ../../sdc
lrwxrwxrwx 1 root root 10 Oct 10 02:26 wwn-0x5000c5001bab37da-part1 -> ../../sdc1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdc1        /target                  ext4       (rw,relatime,errors=remount-ro,data=ordered)


=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=2245ebda-dc75-4740-9f6a-1f1713b0cd46 /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda5 during installation
UUID=a2c986b5-0b68-45f0-87d5-a4c6bb26b21e /home           ext4    defaults        0       2
# swap was on /dev/sda6 during installation
UUID=a7941554-f8fc-4a57-908d-ba0f47e73820 none            swap    sw              0       0
--------------------------------------------------------------------------------

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

set timeout=5
menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  boot=casper integrity-check quiet splash ---
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sdb1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
DEFAULT loadconfig

LABEL loadconfig
  CONFIG /isolinux/isolinux.cfg
  APPEND /isolinux/
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux.cfg                                   1
            ?? = ??             ldlinux.sys                                    1

=============================== sdc1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdc1 during installation
UUID=b46ead3a-13d7-4a1f-a107-5a0437e6c691 /               ext4    errors=remount-ro 0       1
/swapfile                                 none            swap    sw              0       0
--------------------------------------------------------------------------------

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda2



=============================== StdErr Messages: ===============================

hexdump: /dev/sda2: No such device or address
hexdump: /dev/sda2: No such device or address
File descriptor 10 (/proc/17288/mountinfo) leaked on lvs invocation. Parent PID 26666: bash
File descriptor 63 (pipe:[428353]) leaked on lvs invocation. Parent PID 26666: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 20181010_0226 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --- maybe-ubiquity
ls: impossible d'accéder à '/home/usr/.config': Aucun fichier ou dossier de ce type

=================== os-prober:
/dev/sda1:Ubuntu 18.04.1 LTS (18.04):Ubuntu:linux

=================== blkid:
/dev/sda1: UUID="2245ebda-dc75-4740-9f6a-1f1713b0cd46" TYPE="ext4" PARTUUID="683c558a-01"
/dev/sda5: UUID="a2c986b5-0b68-45f0-87d5-a4c6bb26b21e" TYPE="ext4" PARTUUID="683c558a-05"
/dev/sdb1: LABEL="UBUNTU 18_0" UUID="C454-DF6C" TYPE="vfat" PARTUUID="0001eba5-01"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda6: UUID="a7941554-f8fc-4a57-908d-ba0f47e73820" TYPE="swap" PARTUUID="683c558a-06"
/dev/sdc1: UUID="b46ead3a-13d7-4a1f-a107-5a0437e6c691" TYPE="ext4" PARTUUID="91103fc1-01"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Linux not detected by os-prober on sdc1. Veuillez indiquer ce message à boot.repair@gmail.com

=================== sda1/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 oct.   9 22:53 grub.d
total 80
-rwxr-xr-x 1 root root  9783 juil. 18 02:13 00_header
-rwxr-xr-x 1 root root  6258 juil. 16 23:15 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 18 02:13 10_linux
-rwxr-xr-x 1 root root 11298 juil. 18 02:13 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 18 02:13 30_os-prober
-rwxr-xr-x 1 root root  1418 juil. 18 02:13 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 18 02:13 40_custom
-rwxr-xr-x 1 root root   216 juil. 18 02:13 41_custom
-rw-r--r-- 1 root root   483 juil. 18 02:13 README




=================== sda1/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



=================== No kernel in /mnt/boot-sav/sda1/boot:
abi-4.15.0-29-generic
config-4.15.0-29-generic
grub
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
retpoline-4.15.0-29-generic
System.map-4.15.0-29-generic



=================== /target/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 oct.  10 00:06 grub.d
total 80
-rwxr-xr-x 1 root root  9783 juil. 18 02:13 00_header
-rwxr-xr-x 1 root root  6258 juil. 16 23:15 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 18 02:13 10_linux
-rwxr-xr-x 1 root root 11298 juil. 18 02:13 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 18 02:13 30_os-prober
-rwxr-xr-x 1 root root  1418 juil. 18 02:13 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 18 02:13 40_custom
-rwxr-xr-x 1 root root   216 juil. 18 02:13 41_custom
-rw-r--r-- 1 root root   483 juil. 18 02:13 README




=================== /target/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



=================== No kernel in /target/boot:
abi-4.15.0-29-generic
config-4.15.0-29-generic
grub
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
retpoline-4.15.0-29-generic
System.map-4.15.0-29-generic



=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	grub2,	grub-pc ,	update-grub,	64,	no-kernel,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda1.
sda5	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda5.
sdc1	: sdc,	not-sepboot,	no-grubenv	grub2,	grub-pc ,	update-grub,	64,	no-kernel,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /target.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdc	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:320GB:scsi:512:512:msdos:ATA ST9320325AS:;
1:1049kB:100GB:100GB:ext4::boot;
2:100GB:320GB:220GB:::;
5:100GB:317GB:217GB:ext4::;
6:317GB:320GB:2999MB:linux-swap(v1)::;

BYT;
/dev/sdb:15.5GB:scsi:512:512:msdos:Kingston DataTraveler 3.0:;
1:1049kB:15.5GB:15.5GB:fat32::boot;

BYT;
/dev/sdc:320GB:scsi:512:512:msdos:ATA ST9320325AS:;
1:1049kB:320GB:320GB:ext4::;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
loop0 loop squashfs   1,8G
loop1 loop squashfs  86,9M
loop2 loop squashfs  34,7M
loop3 loop squashfs 140,9M
loop4 loop squashfs   2,3M
loop5 loop squashfs    13M
loop6 loop squashfs  14,5M
loop7 loop squashfs   3,7M
sda   disk          298,1G
sda1  part ext4      93,1G
sda5  part ext4     202,2G
sda6  part swap       2,8G
sdb   disk           14,4G
sdb1  part vfat      14,4G UBUNTU 18_0
sdc   disk          298,1G
sdc1  part ext4     298,1G
sr0   rom            1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
loop0    1  1  0         /rofs
loop1    1  1  0         /snap/core/4917
loop2    1  1  0         /snap/gtk-common-themes/319
loop3    1  1  0         /snap/gnome-3-26-1604/70
loop4    1  1  0         /snap/gnome-calculator/180
loop5    1  1  0         /snap/gnome-characters/103
loop6    1  1  0         /snap/gnome-logs/37
loop7    1  1  0         /snap/gnome-system-monitor/51
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda5     1  0  0         /mnt/boot-sav/sda5
sda6     1  0  0         [SWAP]
sdb      1  0  1 running
sdb1     1  0  1         /cdrom
sdc      1  0  0 running
sdc1     1  0  0         /target
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1998456k,nr_inodes=499614,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=403928k,mode=755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=26,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=13248)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=403924k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_319.snap on /snap/gtk-common-themes/319 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_70.snap on /snap/gnome-3-26-1604/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_180.snap on /snap/gnome-calculator/180 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_103.snap on /snap/gnome-characters/103 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_51.snap on /snap/gnome-system-monitor/51 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sdc1 on /target type ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw,relatime,data=ordered)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw,relatime,data=ordered)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg kvm lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sda6 sdb sdb1 sdc sdc1 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper:  control

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  2.0G     0  2.0G   0% /dev
tmpfs          tmpfs     395M  1.7M  393M   1% /run
/dev/sdb1      vfat       15G  1.9G   13G  13% /cdrom
/dev/loop0     squashfs  1.8G  1.8G     0 100% /rofs
/cow           overlay   2.0G  573M  1.4G  30% /
tmpfs          tmpfs     2.0G   60M  1.9G   3% /dev/shm
tmpfs          tmpfs     5.0M  8.0K  5.0M   1% /run/lock
tmpfs          tmpfs     2.0G     0  2.0G   0% /sys/fs/cgroup
tmpfs          tmpfs     2.0G  520K  2.0G   1% /tmp
tmpfs          tmpfs     395M   56K  395M   1% /run/user/999
/dev/loop1     squashfs   87M   87M     0 100% /snap/core/4917
/dev/loop2     squashfs   35M   35M     0 100% /snap/gtk-common-themes/319
/dev/loop3     squashfs  141M  141M     0 100% /snap/gnome-3-26-1604/70
/dev/loop4     squashfs  2.4M  2.4M     0 100% /snap/gnome-calculator/180
/dev/loop5     squashfs   13M   13M     0 100% /snap/gnome-characters/103
/dev/loop6     squashfs   15M   15M     0 100% /snap/gnome-logs/37
/dev/loop7     squashfs  3.8M  3.8M     0 100% /snap/gnome-system-monitor/51
/dev/sdc1      ext4      293G  4.8G  273G   2% /target
/dev/sda1      ext4       91G  2.8G   84G   4% /mnt/boot-sav/sda1
/dev/sda5      ext4      198G   61M  188G   1% /mnt/boot-sav/sda5

=================== fdisk -l:
Disk /dev/loop0: 1.8 GiB, 1864450048 bytes, 3641504 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 34.7 MiB, 36323328 bytes, 70944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 140.9 MiB, 147722240 bytes, 288520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 2.3 MiB, 2433024 bytes, 4752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 14.5 MiB, 15196160 bytes, 29680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 3.7 MiB, 3887104 bytes, 7592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x683c558a

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sda1  *         2048 195312594 195310547  93.1G 83 Linux
/dev/sda2       195313662 625141759 429828098   205G  5 Extended
/dev/sda5       195313664 619282431 423968768 202.2G 83 Linux
/dev/sda6       619284480 625141759   5857280   2.8G 82 Linux swap / Solaris




Disk /dev/sdb: 14.4 GiB, 15472047104 bytes, 30218842 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0001eba5

Device     Boot Start      End  Sectors  Size Id Type
/dev/sdb1  *     2048 30218841 30216794 14.4G  b W95 FAT32


Disk /dev/sdc: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x91103fc1

Device     Boot Start       End   Sectors   Size Id Type
/dev/sdc1        2048 625141759 625139712 298.1G 83 Linux




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except live-disks and removable disks without OS), using the following options:     kernel-purge
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (ATA ST9320325AS) !

Les fichiers de démarrage de [Ubuntu 18.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Je ne suis pas trop sûr de ça mais je crois que c'est un souci avec ta LiveUSB. Si tu peux trouver une autre clé USB et refaire une LIveUSB avec cette autre clé, ça pourrait être intéressant d'essayer.

D'autre part, si ton ordi est un modèle du commerce, je te prie de donner le nom complet du modèle de cet ordi.

Dernière modification par malbo (Le 09/10/2018, à 20:52)

En ligne

#5 Le 09/10/2018, à 22:05

Mouhasar

Re : Problème d'installation

malbo a écrit :

Ton Boot-Info est là :

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => libparted MBR boot code is installed in the MBR of /dev/sda.
 => Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdb.
 => libparted MBR boot code is installed in the MBR of /dev/sdc.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.1 LTS
    Boot files:        /etc/fstab

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda6: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 6.03
    Boot sector info:  Syslinux looks at sector 65544 of /dev/sdb1 for its 
                       second stage. The integrity check of Syslinux failed. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

sdc1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.1 LTS
    Boot files:        /etc/fstab

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   195,312,594   195,310,547  83 Linux
/dev/sda2         195,313,662   625,141,759   429,828,098   5 Extended
/dev/sda5         195,313,664   619,282,431   423,968,768  83 Linux
/dev/sda6         619,284,480   625,141,759     5,857,280  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 14.4 GiB, 15472047104 bytes, 30218842 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *          2,048    30,218,841    30,216,794   b W95 FAT32


Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1               2,048   625,141,759   625,139,712  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/loop7                                              squashfs   
/dev/sda1        2245ebda-dc75-4740-9f6a-1f1713b0cd46   ext4       
/dev/sda5        a2c986b5-0b68-45f0-87d5-a4c6bb26b21e   ext4       
/dev/sda6        a7941554-f8fc-4a57-908d-ba0f47e73820   swap       
/dev/sdb1        C454-DF6C                              vfat       UBUNTU 18_0
/dev/sdc1        b46ead3a-13d7-4a1f-a107-5a0437e6c691   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Oct 10 02:26 ata-ST9320325AS_6VD0KFPH -> ../../sda
lrwxrwxrwx 1 root root 10 Oct 10 02:26 ata-ST9320325AS_6VD0KFPH-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct 10 02:26 ata-ST9320325AS_6VD0KFPH-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Oct 10 02:26 ata-ST9320325AS_6VD0KFPH-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Oct 10 02:26 ata-ST9320325AS_6VD0KFPH-part6 -> ../../sda6
lrwxrwxrwx 1 root root  9 Oct 10 02:26 ata-ST9320325AS_6VD0R3C7 -> ../../sdc
lrwxrwxrwx 1 root root 10 Oct 10 02:26 ata-ST9320325AS_6VD0R3C7-part1 -> ../../sdc1
lrwxrwxrwx 1 root root  9 Oct 10 00:03 ata-TSSTcorp_CDDVDW_TS-L633C_a1C3456789_LMNOP -> ../../sr0
lrwxrwxrwx 1 root root  9 Oct 10 02:26 usb-Kingston_DataTraveler_3.0_C81F660E893EF1B03603D00B-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Oct 10 02:26 usb-Kingston_DataTraveler_3.0_C81F660E893EF1B03603D00B-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 Oct 10 02:26 wwn-0x5000c5001b93590d -> ../../sda
lrwxrwxrwx 1 root root 10 Oct 10 02:26 wwn-0x5000c5001b93590d-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct 10 02:26 wwn-0x5000c5001b93590d-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Oct 10 02:26 wwn-0x5000c5001b93590d-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Oct 10 02:26 wwn-0x5000c5001b93590d-part6 -> ../../sda6
lrwxrwxrwx 1 root root  9 Oct 10 02:26 wwn-0x5000c5001bab37da -> ../../sdc
lrwxrwxrwx 1 root root 10 Oct 10 02:26 wwn-0x5000c5001bab37da-part1 -> ../../sdc1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdc1        /target                  ext4       (rw,relatime,errors=remount-ro,data=ordered)


=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=2245ebda-dc75-4740-9f6a-1f1713b0cd46 /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda5 during installation
UUID=a2c986b5-0b68-45f0-87d5-a4c6bb26b21e /home           ext4    defaults        0       2
# swap was on /dev/sda6 during installation
UUID=a7941554-f8fc-4a57-908d-ba0f47e73820 none            swap    sw              0       0
--------------------------------------------------------------------------------

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

set timeout=5
menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  boot=casper integrity-check quiet splash ---
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sdb1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
DEFAULT loadconfig

LABEL loadconfig
  CONFIG /isolinux/isolinux.cfg
  APPEND /isolinux/
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux.cfg                                   1
            ?? = ??             ldlinux.sys                                    1

=============================== sdc1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdc1 during installation
UUID=b46ead3a-13d7-4a1f-a107-5a0437e6c691 /               ext4    errors=remount-ro 0       1
/swapfile                                 none            swap    sw              0       0
--------------------------------------------------------------------------------

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda2



=============================== StdErr Messages: ===============================

hexdump: /dev/sda2: No such device or address
hexdump: /dev/sda2: No such device or address
File descriptor 10 (/proc/17288/mountinfo) leaked on lvs invocation. Parent PID 26666: bash
File descriptor 63 (pipe:[428353]) leaked on lvs invocation. Parent PID 26666: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 20181010_0226 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --- maybe-ubiquity
ls: impossible d'accéder à '/home/usr/.config': Aucun fichier ou dossier de ce type

=================== os-prober:
/dev/sda1:Ubuntu 18.04.1 LTS (18.04):Ubuntu:linux

=================== blkid:
/dev/sda1: UUID="2245ebda-dc75-4740-9f6a-1f1713b0cd46" TYPE="ext4" PARTUUID="683c558a-01"
/dev/sda5: UUID="a2c986b5-0b68-45f0-87d5-a4c6bb26b21e" TYPE="ext4" PARTUUID="683c558a-05"
/dev/sdb1: LABEL="UBUNTU 18_0" UUID="C454-DF6C" TYPE="vfat" PARTUUID="0001eba5-01"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda6: UUID="a7941554-f8fc-4a57-908d-ba0f47e73820" TYPE="swap" PARTUUID="683c558a-06"
/dev/sdc1: UUID="b46ead3a-13d7-4a1f-a107-5a0437e6c691" TYPE="ext4" PARTUUID="91103fc1-01"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Linux not detected by os-prober on sdc1. Veuillez indiquer ce message à boot.repair@gmail.com

=================== sda1/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 oct.   9 22:53 grub.d
total 80
-rwxr-xr-x 1 root root  9783 juil. 18 02:13 00_header
-rwxr-xr-x 1 root root  6258 juil. 16 23:15 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 18 02:13 10_linux
-rwxr-xr-x 1 root root 11298 juil. 18 02:13 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 18 02:13 30_os-prober
-rwxr-xr-x 1 root root  1418 juil. 18 02:13 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 18 02:13 40_custom
-rwxr-xr-x 1 root root   216 juil. 18 02:13 41_custom
-rw-r--r-- 1 root root   483 juil. 18 02:13 README




=================== sda1/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



=================== No kernel in /mnt/boot-sav/sda1/boot:
abi-4.15.0-29-generic
config-4.15.0-29-generic
grub
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
retpoline-4.15.0-29-generic
System.map-4.15.0-29-generic



=================== /target/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 oct.  10 00:06 grub.d
total 80
-rwxr-xr-x 1 root root  9783 juil. 18 02:13 00_header
-rwxr-xr-x 1 root root  6258 juil. 16 23:15 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 18 02:13 10_linux
-rwxr-xr-x 1 root root 11298 juil. 18 02:13 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 18 02:13 30_os-prober
-rwxr-xr-x 1 root root  1418 juil. 18 02:13 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 18 02:13 40_custom
-rwxr-xr-x 1 root root   216 juil. 18 02:13 41_custom
-rw-r--r-- 1 root root   483 juil. 18 02:13 README




=================== /target/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



=================== No kernel in /target/boot:
abi-4.15.0-29-generic
config-4.15.0-29-generic
grub
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
retpoline-4.15.0-29-generic
System.map-4.15.0-29-generic



=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	grub2,	grub-pc ,	update-grub,	64,	no-kernel,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda1.
sda5	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda5.
sdc1	: sdc,	not-sepboot,	no-grubenv	grub2,	grub-pc ,	update-grub,	64,	no-kernel,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /target.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdc	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:320GB:scsi:512:512:msdos:ATA ST9320325AS:;
1:1049kB:100GB:100GB:ext4::boot;
2:100GB:320GB:220GB:::;
5:100GB:317GB:217GB:ext4::;
6:317GB:320GB:2999MB:linux-swap(v1)::;

BYT;
/dev/sdb:15.5GB:scsi:512:512:msdos:Kingston DataTraveler 3.0:;
1:1049kB:15.5GB:15.5GB:fat32::boot;

BYT;
/dev/sdc:320GB:scsi:512:512:msdos:ATA ST9320325AS:;
1:1049kB:320GB:320GB:ext4::;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
loop0 loop squashfs   1,8G
loop1 loop squashfs  86,9M
loop2 loop squashfs  34,7M
loop3 loop squashfs 140,9M
loop4 loop squashfs   2,3M
loop5 loop squashfs    13M
loop6 loop squashfs  14,5M
loop7 loop squashfs   3,7M
sda   disk          298,1G
sda1  part ext4      93,1G
sda5  part ext4     202,2G
sda6  part swap       2,8G
sdb   disk           14,4G
sdb1  part vfat      14,4G UBUNTU 18_0
sdc   disk          298,1G
sdc1  part ext4     298,1G
sr0   rom            1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
loop0    1  1  0         /rofs
loop1    1  1  0         /snap/core/4917
loop2    1  1  0         /snap/gtk-common-themes/319
loop3    1  1  0         /snap/gnome-3-26-1604/70
loop4    1  1  0         /snap/gnome-calculator/180
loop5    1  1  0         /snap/gnome-characters/103
loop6    1  1  0         /snap/gnome-logs/37
loop7    1  1  0         /snap/gnome-system-monitor/51
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda5     1  0  0         /mnt/boot-sav/sda5
sda6     1  0  0         [SWAP]
sdb      1  0  1 running
sdb1     1  0  1         /cdrom
sdc      1  0  0 running
sdc1     1  0  0         /target
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1998456k,nr_inodes=499614,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=403928k,mode=755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=26,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=13248)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=403924k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_319.snap on /snap/gtk-common-themes/319 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_70.snap on /snap/gnome-3-26-1604/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_180.snap on /snap/gnome-calculator/180 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_103.snap on /snap/gnome-characters/103 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_51.snap on /snap/gnome-system-monitor/51 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sdc1 on /target type ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw,relatime,data=ordered)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw,relatime,data=ordered)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg kvm lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sda6 sdb sdb1 sdc sdc1 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper:  control

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  2.0G     0  2.0G   0% /dev
tmpfs          tmpfs     395M  1.7M  393M   1% /run
/dev/sdb1      vfat       15G  1.9G   13G  13% /cdrom
/dev/loop0     squashfs  1.8G  1.8G     0 100% /rofs
/cow           overlay   2.0G  573M  1.4G  30% /
tmpfs          tmpfs     2.0G   60M  1.9G   3% /dev/shm
tmpfs          tmpfs     5.0M  8.0K  5.0M   1% /run/lock
tmpfs          tmpfs     2.0G     0  2.0G   0% /sys/fs/cgroup
tmpfs          tmpfs     2.0G  520K  2.0G   1% /tmp
tmpfs          tmpfs     395M   56K  395M   1% /run/user/999
/dev/loop1     squashfs   87M   87M     0 100% /snap/core/4917
/dev/loop2     squashfs   35M   35M     0 100% /snap/gtk-common-themes/319
/dev/loop3     squashfs  141M  141M     0 100% /snap/gnome-3-26-1604/70
/dev/loop4     squashfs  2.4M  2.4M     0 100% /snap/gnome-calculator/180
/dev/loop5     squashfs   13M   13M     0 100% /snap/gnome-characters/103
/dev/loop6     squashfs   15M   15M     0 100% /snap/gnome-logs/37
/dev/loop7     squashfs  3.8M  3.8M     0 100% /snap/gnome-system-monitor/51
/dev/sdc1      ext4      293G  4.8G  273G   2% /target
/dev/sda1      ext4       91G  2.8G   84G   4% /mnt/boot-sav/sda1
/dev/sda5      ext4      198G   61M  188G   1% /mnt/boot-sav/sda5

=================== fdisk -l:
Disk /dev/loop0: 1.8 GiB, 1864450048 bytes, 3641504 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 34.7 MiB, 36323328 bytes, 70944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 140.9 MiB, 147722240 bytes, 288520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 2.3 MiB, 2433024 bytes, 4752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 14.5 MiB, 15196160 bytes, 29680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 3.7 MiB, 3887104 bytes, 7592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x683c558a

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sda1  *         2048 195312594 195310547  93.1G 83 Linux
/dev/sda2       195313662 625141759 429828098   205G  5 Extended
/dev/sda5       195313664 619282431 423968768 202.2G 83 Linux
/dev/sda6       619284480 625141759   5857280   2.8G 82 Linux swap / Solaris




Disk /dev/sdb: 14.4 GiB, 15472047104 bytes, 30218842 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0001eba5

Device     Boot Start      End  Sectors  Size Id Type
/dev/sdb1  *     2048 30218841 30216794 14.4G  b W95 FAT32


Disk /dev/sdc: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x91103fc1

Device     Boot Start       End   Sectors   Size Id Type
/dev/sdc1        2048 625141759 625139712 298.1G 83 Linux




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except live-disks and removable disks without OS), using the following options:     kernel-purge
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (ATA ST9320325AS) !

Les fichiers de démarrage de [Ubuntu 18.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Je ne suis pas trop sûr de ça mais je crois que c'est un souci avec ta LiveUSB. Si tu peux trouver une autre clé USB et refaire une LIveUSB avec cette autre clé, ça pourrait être intéressant d'essayer.

D'autre part, si ton ordi est un modèle du commerce, je te prie de donner le nom complet du modèle de cet ordi.

Oui d'accord sinon je vais rebooter la clé avec un autre logiciel .le PC c'est un Asus n71VN

Dernière modification par Mouhasar (Le 09/10/2018, à 22:06)

Hors ligne

#6 Le 10/10/2018, à 07:48

malbo

Re : Problème d'installation

Bonjour,
Le nom complet de ton modèle doit être ASUS N71VN-TY018V qu'on peut voir sur cette page : https://www.ldlc.com/fiche/PB00093888.html (ton ordi est équipé de deux disques durs de 320 Go)
C'est un modèle pas tout jeune et il est possible que ton ordi ait un peu de plomb dans l'aile. Ce serait utile que tu nous fournisses les données SMART de tes deux disques durs sda et sdc en suivant mes indications de ce tuto : https://forum.ubuntu-fr.org/viewtopic.php?id=1988280

Dernière modification par malbo (Le 10/10/2018, à 09:04)

En ligne

#7 Le 10/10/2018, à 20:30

Mouhasar

Re : Problème d'installation

malbo a écrit :

Bonjour,
Le nom complet de ton modèle doit être ASUS N71VN-TY018V qu'on peut voir sur cette page : https://www.ldlc.com/fiche/PB00093888.html (ton ordi est équipé de deux disques durs de 320 Go)
C'est un modèle pas tout jeune et il est possible que ton ordi ait un peu de plomb dans l'aile. Ce serait utile que tu nous fournisses les données SMART de tes deux disques durs sda et sdc en suivant mes indications de ce tuto : https://forum.ubuntu-fr.org/viewtopic.php?id=1988280

Bonjour ,
Voici les données smart de mes 2 disques

ubuntu@ubuntu:~$ sudo smartctl -a /dev/sdc
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-29-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Momentus 5400.6
Device Model:     ST9320325AS
Serial Number:    6VD0R3C7
LU WWN Device Id: 5 000c50 01bab37da
Firmware Version: 0002SDM1
User Capacity:    320072933376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Wed Oct 10 18:22:05 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (    0) seconds.
Offline data collection
capabilities:              (0x73) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      (  97) minutes.
Conveyance self-test routine
recommended polling time:      (   2) minutes.
SCT capabilities:            (0x103b)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   113   099   006    Pre-fail  Always       -       57065555
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   098   098   020    Old_age   Always       -       2651
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   073   060   030    Pre-fail  Always       -       21181390
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       5664
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   099   037   020    Old_age   Always       -       1454
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       12885098565
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   067   051   045    Old_age   Always       -       33 (Min/Max 22/33)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       31
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       27
193 Load_Cycle_Count        0x0032   064   064   000    Old_age   Always       -       72890
194 Temperature_Celsius     0x0022   033   049   000    Old_age   Always       -       33 (0 2 0 0 0)
195 Hardware_ECC_Recovered  0x001a   065   055   000    Old_age   Always       -       57065555
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-29-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Momentus 5400.6
Device Model:     ST9320325AS
Serial Number:    6VD0KFPH
LU WWN Device Id: 5 000c50 01b93590d
Firmware Version: 0002SDM1
User Capacity:    320072933376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Wed Oct 10 18:23:13 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (    0) seconds.
Offline data collection
capabilities:              (0x73) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      (  96) minutes.
Conveyance self-test routine
recommended polling time:      (   2) minutes.
SCT capabilities:            (0x103b)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   120   099   006    Pre-fail  Always       -       236164170
  3 Spin_Up_Time            0x0003   099   098   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1707
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   079   060   030    Pre-fail  Always       -       88336255
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       5639
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   099   037   020    Old_age   Always       -       1450
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   099   099   000    Old_age   Always       -       1
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       12885098564
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   065   050   045    Old_age   Always       -       35 (Min/Max 23/35)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       324
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       29
193 Load_Cycle_Count        0x0032   082   082   000    Old_age   Always       -       36010
194 Temperature_Celsius     0x0022   035   050   000    Old_age   Always       -       35 (0 3 0 0 0)
195 Hardware_ECC_Recovered  0x001a   062   052   000    Old_age   Always       -       236164170
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 1
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 82 58 34 06  Error: WP at LBA = 0x06345882 = 104093826

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 08 c4 09 8f 41 00      00:11:11.770  WRITE FPDMA QUEUED
  61 00 08 bc 09 8f 41 00      00:11:11.770  WRITE FPDMA QUEUED
  61 00 08 b4 09 8f 41 00      00:11:11.769  WRITE FPDMA QUEUED
  61 00 08 ac 09 8f 41 00      00:11:11.769  WRITE FPDMA QUEUED
  61 00 08 a4 09 8f 41 00      00:11:11.768  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Hors ligne

#8 Le 10/10/2018, à 20:43

malbo

Re : Problème d'installation

Pour moi, ces deux disques durs sont en bon état. C'était une fausse piste. Essaie d'utiliser une autre clé USB pour faire ta LiveUSB comme je t'ai suggéré dans le post #4.

En ligne

#9 Le 10/10/2018, à 20:59

Mouhasar

Re : Problème d'installation

malbo a écrit :

Pour moi, ces deux disques durs sont en bon état. C'était une fausse piste. Essaie d'utiliser une autre clé USB pour faire ta LiveUSB comme je t'ai suggéré dans le post #4.

oui c'est ce que je me disais parce que tous les deux disque fonctionne correctement .
Mais j' ai un autre piste je pense l'image ISO n'est pas complete dans le clé car j'ai vérifié le nombre de Giga utilisé sur mon clé et j' ai remarqué qu' il  avait occupé que 1,85 du clé
et je pense l'image fait au moins 4 giga.
Le seule doute que  j'ai c'est le fais que le mode live usb marche?

Dernière modification par Mouhasar (Le 10/10/2018, à 21:01)

Hors ligne

#10 Le 11/10/2018, à 08:27

malbo

Re : Problème d'installation

Mouhasar a écrit :

je pense l'image ISO n'est pas complete dans le clé car j'ai vérifié le nombre de Giga utilisé sur mon clé et j' ai remarqué qu' il  avait occupé que 1,85 du clé et je pense l'image fait au moins 4 giga.

Effectivement, on voit ça dans ton Boot-Info :

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  2.0G     0  2.0G   0% /dev
tmpfs          tmpfs     395M  1.7M  393M   1% /run
/dev/sdb1      vfat       15G  1.9G   13G  13% /cdrom

C'est à dire 1.9 Go occupés sur ta clé USB.
Mais ce n'est pas une anomalie parce que l'image (fichier ubuntu-18.04.1-desktop-amd64.iso) fait bien cette taille comme c'est précisé ici : http://releases.ubuntu.com/releases/bio … -amd64.iso
On y voit  "image CD brute (1,8 Go)"

Dernière modification par malbo (Le 11/10/2018, à 08:27)

En ligne

#11 Le 11/10/2018, à 09:29

Nasman

Re : Problème d'installation

Je ne comprend pas à quoi correspondent ces installations d'Ubuntu :
Je suppose seulement que sdb est juste un disque de stockage et que sdb1 en fat32 n'est pas une partition efi.

sdc semble incomplet. Si c'est la clé Live, tu devrais avoir 2 partitions, l'une de type 0 (DVD) et l'autre de type EFI (si c'est une 64 bits). Or on ne voit pas le type 0. Est ce une installation qui aurait été faite antérieurement sur la clé (et pas un LiveUSB) ?

Si l'installation est faite sur sda (système sda1 et données sda5) alors il manque grub-pc dans le mbr de sda pour que cela fonctionne (mais ça a planté à l'installation).

Quel est l'architecture que tu veux installer, 32 ou 64 bits ?
Comment as tu réalisé ta clé ?


PC fixe sous Bionic 64 bits et portable avec Xenial 64 bits

Hors ligne

#12 Le 11/10/2018, à 09:37

malbo

Re : Problème d'installation

@Nasman,
sdb, c'est sa LiveUSB qui est une Kingston DataTraveler comme tu peux voir dans cet extrait :

BYT;
/dev/sdb:15.5GB:scsi:512:512:msdos:Kingston DataTraveler 3.0:;
1:1049kB:15.5GB:15.5GB:fat32::boot;

Quant à sdc et sda, ce sont des disques durs bien détaillés dans le post #7.
Le réveil semble difficile...

En ligne