Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 11/11/2018, à 18:40

elrockito

Cle USB non reconnue non montée [ RESOLU] cle foutue

Bonjour, mon fils utilise sa clé USB pour le collège (windows).
Il a réalisé un exposé sur son ordi qui tourne sous voyager un ubuntu 16.04 avec libreoffice.
Mais aujourd'hui sa cle n'est pas reconnu.

En suivant le Tuto ma clé ne monte pas ou mal, voici le retour:

gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 13d3:3408 IMC Networks 
Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 003: ID 04f2:b409 Chicony Electronics Co., Ltd 
Bus 001 Device 002: ID 0457:1029 Silicon Integrated Systems Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 480M
    |__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 3: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
    |__ Port 3: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
    |__ Port 4: Dev 4, If 0, Class=Hub, Driver=hub/3p, 480M
        |__ Port 1: Dev 6, If 0, Class=Wireless, Driver=btusb, 12M
        |__ Port 1: Dev 6, If 1, Class=Wireless, Driver=btusb, 12M


total 12
drwxr-xr-x   3 root root 4096 janv.  4  2017 .
drwxr-xr-x  26 root root 4096 oct.  24 18:29 ..
drwxr-x---+  2 root root 4096 nov.   5 15:37 elrockito

total 8
drwxr-x---+ 2 root root 4096 nov.   5 15:37 .
drwxr-xr-x  3 root root 4096 janv.  4  2017 ..

ii ranger 1.7.1-1 all
ii thunar 1.6.11-0ubuntu0.16.04.2 amd64

lrwxrwxrwx 1 root root 10 nov.  11 18:04 wwn-0x50014ee20a3ca548-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 nov.  11 18:04 ata-WDC_WD5000LPVX-80V0TT0_WD-WX21A34F7754-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 nov.  11 18:04 ata-WDC_WD5000LPVX-80V0TT0_WD-WX21A34F7754-part2 -> ../../sda2

Je ne comprend pas.....


Je vous remercie de votre aide   big_smile

Dernière modification par elrockito (Le 11/11/2018, à 21:51)


“N'allez pas là où le chemin peut mener. Allez là où il n'y a pas de chemin et laissez une trace.”
De Ralph Waldo Emerson

VOYAGER 16.04.01 LTS 64         Kernel    : Linux 4.4.0-59-generic

Hors ligne

#2 Le 11/11/2018, à 18:58

inbox

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

Salut,

Peux-tu donner le résultat de cette commande ?

dmesg | grep sd

A+


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#3 Le 11/11/2018, à 19:01

elrockito

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

voici la réponse :

└─ $ ▶ dmesg | grep sd
[    1.964727] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.964734] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.964790] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.964922] sd 0:0:0:0: [sda] Write Protect is off
[    1.964929] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.964971] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.045340]  sda: sda1 sda2 < sda5 sda6 >
[    2.046583] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.601652] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    9.749831] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   21.930887] Adding 3905532k swap on /dev/sda1.  Priority:-1 extents:1 across:3905532k FS
[   23.890512] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)

“N'allez pas là où le chemin peut mener. Allez là où il n'y a pas de chemin et laissez une trace.”
De Ralph Waldo Emerson

VOYAGER 16.04.01 LTS 64         Kernel    : Linux 4.4.0-59-generic

Hors ligne

#4 Le 11/11/2018, à 19:05

inbox

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

Il n'y a pas trace du branchement de la clef USB problématique. Branche la, attend une vingtaine de secondes et passes la commande de nouveau.


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#5 Le 11/11/2018, à 19:12

elrockito

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

Oui, le pb est bien là pour moi, je ne comprend pas du tout.....


nouvelle réponse:

 dmesg | grep sd
[    1.964727] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.964734] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.964790] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.964922] sd 0:0:0:0: [sda] Write Protect is off
[    1.964929] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.964971] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.045340]  sda: sda1 sda2 < sda5 sda6 >
[    2.046583] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.601652] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    9.749831] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   21.930887] Adding 3905532k swap on /dev/sda1.  Priority:-1 extents:1 across:3905532k FS
[   23.890512] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)

“N'allez pas là où le chemin peut mener. Allez là où il n'y a pas de chemin et laissez une trace.”
De Ralph Waldo Emerson

VOYAGER 16.04.01 LTS 64         Kernel    : Linux 4.4.0-59-generic

Hors ligne

#6 Le 11/11/2018, à 19:19

inbox

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

Toujours rien d'intéressant. Peux-tu essayer sur un autre port USB ?

En complément donne la totalité de après avoir branché la clef :

dmesg

Dernière modification par inbox (Le 11/11/2018, à 19:22)


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#7 Le 11/11/2018, à 19:35

elrockito

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

voici:

 dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-138-generic (buildd@lcy01-amd64-006) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10) ) #164-Ubuntu SMP Tue Oct 2 17:16:02 UTC 2018 (Ubuntu 4.4.0-138.164-generic 4.4.155)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-138-generic root=UUID=a4714d88-99e9-4354-a16d-238da0f1e4e8 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000b8d35fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b8d36000-0x00000000b8d65fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b8d66000-0x00000000b8eb5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b8eb6000-0x00000000b93b8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b93b9000-0x00000000b9bacfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9bad000-0x00000000b9badfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9bae000-0x00000000b9beffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9bf0000-0x00000000b9d65fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9d66000-0x00000000b9ff9fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9ffa000-0x00000000b9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. X200MA/X200MA, BIOS X200MA.500 05/04/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BA000000 mask FFE000000 uncachable
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 100000000 mask FC0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 2976MB, range: 32MB, type UC
[    0.000000] reg 3, base: 3008MB, range: 64MB, type UC
[    0.000000] reg 4, base: 4GB, range: 1GB, type WB
[    0.000000] total RAM covered: 4000M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 5  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 2976MB, range: 32MB, type UC
[    0.000000] reg 3, base: 3008MB, range: 64MB, type UC
[    0.000000] reg 4, base: 4GB, range: 1GB, type WB
[    0.000000] e820: update [mem 0xba000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd720-0x000fd72f] mapped at [ffff8800000fd720]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000086000] 86000 size 28672
[    0.000000] BRK [0x0221b000, 0x0221bfff] PGTABLE
[    0.000000] BRK [0x0221c000, 0x0221cfff] PGTABLE
[    0.000000] BRK [0x0221d000, 0x0221dfff] PGTABLE
[    0.000000] BRK [0x0221e000, 0x0221efff] PGTABLE
[    0.000000] BRK [0x0221f000, 0x0221ffff] PGTABLE
[    0.000000] BRK [0x02220000, 0x02220fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33326000-0x3598afff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000B93A3080 00007C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000B93B4ED0 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150930/tbfadt-623)
[    0.000000] ACPI: DSDT 0x00000000B93A3190 011D3A (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000B93B8F80 000040
[    0.000000] ACPI: APIC 0x00000000B93B4FE0 000084 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000B93B5068 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000B93B50B0 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: LPIT 0x00000000B93B50F0 000104 (v01 _ASUS_ Notebook 00000003 VLV2 0100000D)
[    0.000000] ACPI: ECDT 0x00000000B93B51F8 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: HPET 0x00000000B93B52C0 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000B93B52F8 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000B93B5A60 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000B93B5CF0 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000B93B5E70 000042 (v01 _ASUS_ Notebook 00000000      00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13fff5000-0x13fff9fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020100000-0x00000000b8d35fff]
[    0.000000]   node   0: [mem 0x00000000b8d66000-0x00000000b8eb5fff]
[    0.000000]   node   0: [mem 0x00000000b9bad000-0x00000000b9badfff]
[    0.000000]   node   0: [mem 0x00000000b9bf0000-0x00000000b9d65fff]
[    0.000000]   node   0: [mem 0x00000000b9ffa000-0x00000000b9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1019535
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3980 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11773 pages used for memmap
[    0.000000]   DMA32 zone: 753411 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.000000] Reserving Intel graphics stolen memory at 0xbb000000-0xbeffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] low dfl lint[0xc])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0xcf])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] low res lint[0x82])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] low res lint[0x5e])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008d000-0x0008dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb8d36000-0xb8d65fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb8eb6000-0xb93b8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb93b9000-0xb9bacfff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9bae000-0xb9beffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9d66000-0xb9ff9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 34 pages/cpu @ffff88013fc00000 s99608 r8192 d31464 u524288
[    0.000000] pcpu-alloc: s99608 r8192 d31464 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1003580
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-138-generic root=UUID=a4714d88-99e9-4354-a16d-238da0f1e4e8 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3887744K/4078140K available (8563K kernel code, 1314K rwdata, 4004K rodata, 1528K init, 1316K bss, 190396K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Maximum core-clock to bus-clock ratio: 0x1a
[    0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[    0.000000] TSC runs at 2163200 KHz
[    0.000000] lapic_timer_frequency = 332800
[    0.000000] tsc: Detected 2163.200 MHz processor
[    0.000606] Calibrating delay loop (skipped), value calculated using timer frequency.. 4326.40 BogoMIPS (lpj=8652800)
[    0.000612] pid_max: default: 32768 minimum: 301
[    0.000624] ACPI: Core revision 20150930
[    0.033255] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.033297] Security Framework initialized
[    0.033302] Yama: becoming mindful.
[    0.033334] AppArmor: AppArmor initialized
[    0.033803] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.035531] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.036349] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.036363] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.036716] Initializing cgroup subsys io
[    0.036726] Initializing cgroup subsys memory
[    0.036741] Initializing cgroup subsys devices
[    0.036746] Initializing cgroup subsys freezer
[    0.036751] Initializing cgroup subsys net_cls
[    0.036756] Initializing cgroup subsys perf_event
[    0.036762] Initializing cgroup subsys net_prio
[    0.036770] Initializing cgroup subsys hugetlb
[    0.036775] Initializing cgroup subsys pids
[    0.036803] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.036806] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.041574] mce: CPU supports 6 MCE banks
[    0.041586] CPU0: Thermal monitoring enabled (TM1)
[    0.041592] process: using mwait in idle threads
[    0.041598] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.041601] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.041605] Spectre V2 : Mitigation: Full generic retpoline
[    0.041609] Spectre V2 : Spectre v2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[    0.041612] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.042064] Freeing SMP alternatives memory: 32K
[    0.045597] ftrace: allocating 32278 entries in 127 pages
[    0.074716] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.074722] smpboot: Max logical packages: 1
[    0.075462] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.115170] TSC deadline timer enabled
[    0.115175] smpboot: CPU0: Intel(R) Pentium(R) CPU  N3530  @ 2.16GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.115206] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.115221] ... version:                3
[    0.115224] ... bit width:              40
[    0.115226] ... generic registers:      2
[    0.115228] ... value mask:             000000ffffffffff
[    0.115230] ... max period:             0000007fffffffff
[    0.115232] ... fixed-purpose events:   3
[    0.115235] ... event mask:             0000000700000003
[    0.116770] x86: Booting SMP configuration:
[    0.116775] .... node  #0, CPUs:      #1
[    0.123845] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.124085]  #2 #3
[    0.138159] x86: Booted up 1 node, 4 CPUs
[    0.138164] smpboot: Total of 4 processors activated (17305.60 BogoMIPS)
[    0.139290] devtmpfs: initialized
[    0.146376] evm: security.selinux
[    0.146379] evm: security.SMACK64
[    0.146381] evm: security.SMACK64EXEC
[    0.146383] evm: security.SMACK64TRANSMUTE
[    0.146385] evm: security.SMACK64MMAP
[    0.146388] evm: security.ima
[    0.146389] evm: security.capability
[    0.146593] PM: Registering ACPI NVS region [mem 0xb8eb6000-0xb93b8fff] (5255168 bytes)
[    0.146948] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.146969] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.147157] pinctrl core: initialized pinctrl subsystem
[    0.147526] RTC time: 16:59:52, date: 11/11/18
[    0.147869] NET: Registered protocol family 16
[    0.159785] cpuidle: using governor ladder
[    0.171819] cpuidle: using governor menu
[    0.171843] PCCT header not found.
[    0.172078] ACPI: bus type PCI registered
[    0.172083] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.172206] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.172211] PCI: not using MMCONFIG
[    0.172214] PCI: Using configuration type 1 for base access
[    0.185357] ACPI: Added _OSI(Module Device)
[    0.185362] ACPI: Added _OSI(Processor Device)
[    0.185365] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.185368] ACPI: Added _OSI(Processor Aggregator Device)
[    0.189634] ACPI : EC: EC description table is found, configuring boot EC
[    0.189657] ACPI : EC: EC started
[    0.202927] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.207304] ACPI: Dynamic OEM Table Load:
[    0.207315] ACPI: SSDT 0xFFFF88013A799800 00045B (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.208636] ACPI: Dynamic OEM Table Load:
[    0.208646] ACPI: SSDT 0xFFFF88013A79A000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.210363] ACPI: Dynamic OEM Table Load:
[    0.210372] ACPI: SSDT 0xFFFF88013A7C9C00 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.211625] ACPI: Dynamic OEM Table Load:
[    0.211633] ACPI: SSDT 0xFFFF88013A7B9840 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.214231] ACPI: Interpreter enabled
[    0.214271] ACPI: (supports S0 S3 S4 S5)
[    0.214274] ACPI: Using IOAPIC for interrupt routing
[    0.214339] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.215327] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.215359] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.226334] ACPI: Power Resource [USBC] (on)
[    0.228339] ACPI: Power Resource [PLPE] (on)
[    0.228721] ACPI: Power Resource [PLPE] (on)
[    0.234029] ACPI: Power Resource [CLK0] (on)
[    0.234118] ACPI: Power Resource [CLK1] (on)
[    0.238302] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.238314] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.238400] \_SB_.PCI0:_OSC invalid UUID
[    0.238404] _OSC request data:1 1f 0 
[    0.238411] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.239115] PCI host bridge to bus 0000:00
[    0.239122] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.239126] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.239131] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.239135] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.239139] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.239143] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.239147] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.239151] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0815ffe window]
[    0.239155] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.239168] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.239377] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.239399] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[    0.239412] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[    0.239424] pci 0000:00:02.0: reg 0x20: [io  0xf080-0xf087]
[    0.239626] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[    0.239656] pci 0000:00:13.0: reg 0x10: [io  0xf070-0xf077]
[    0.239667] pci 0000:00:13.0: reg 0x14: [io  0xf060-0xf063]
[    0.239678] pci 0000:00:13.0: reg 0x18: [io  0xf050-0xf057]
[    0.239689] pci 0000:00:13.0: reg 0x1c: [io  0xf040-0xf043]
[    0.239700] pci 0000:00:13.0: reg 0x20: [io  0xf020-0xf03f]
[    0.239711] pci 0000:00:13.0: reg 0x24: [mem 0xd0815000-0xd08157ff]
[    0.239752] pci 0000:00:13.0: PME# supported from D3hot
[    0.239922] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.239951] pci 0000:00:14.0: reg 0x10: [mem 0xd0800000-0xd080ffff 64bit]
[    0.240008] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.240150] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.240233] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.240274] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
[    0.240290] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
[    0.240382] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.240554] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[    0.240588] pci 0000:00:1b.0: reg 0x10: [mem 0xd0810000-0xd0813fff 64bit]
[    0.240654] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.240822] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[    0.240888] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.240992] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.241068] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[    0.241134] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.241238] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.241312] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[    0.241378] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.241484] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.241565] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.241801] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[    0.241851] pci 0000:00:1f.3: reg 0x10: [mem 0xd0814000-0xd081401f]
[    0.241924] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.242245] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.242372] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[    0.242416] pci 0000:02:00.0: reg 0x10: [mem 0xd0700000-0xd077ffff 64bit]
[    0.242469] pci 0000:02:00.0: reg 0x30: [mem 0xd0780000-0xd078ffff pref]
[    0.242529] pci 0000:02:00.0: supports D1 D2
[    0.242533] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.242591] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.248188] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.248219] pci 0000:00:1c.1:   bridge window [mem 0xd0700000-0xd07fffff]
[    0.248419] pci 0000:03:00.0: [10ec:5286] type 00 class 0xff0000
[    0.248462] pci 0000:03:00.0: reg 0x10: [mem 0xd0600000-0xd060ffff]
[    0.248587] pci 0000:03:00.0: supports D1 D2
[    0.248591] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.248653] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.248738] pci 0000:03:00.2: [10ec:8136] type 00 class 0x020000
[    0.248781] pci 0000:03:00.2: reg 0x10: [io  0xe000-0xe0ff]
[    0.248812] pci 0000:03:00.2: reg 0x18: [mem 0xd0614000-0xd0614fff 64bit]
[    0.248832] pci 0000:03:00.2: reg 0x20: [mem 0xd0610000-0xd0613fff 64bit pref]
[    0.248900] pci 0000:03:00.2: supports D1 D2
[    0.248904] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.256222] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.256248] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.256270] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.257362] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[    0.257492] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.257618] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.257745] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.257870] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.257997] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.258123] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.258250] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.260209] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.260407] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.260680] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.260685] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.260690] vgaarb: loaded
[    0.260693] vgaarb: bridge control possible 0000:00:02.0
[    0.261306] SCSI subsystem initialized
[    0.261424] libata version 3.00 loaded.
[    0.261476] ACPI: bus type USB registered
[    0.261511] usbcore: registered new interface driver usbfs
[    0.261596] usbcore: registered new interface driver hub
[    0.261748] usbcore: registered new device driver usb
[    0.262120] PCI: Using ACPI for IRQ routing
[    0.268185] PCI: pci_cache_line_size set to 64 bytes
[    0.268236] e820: reserve RAM buffer [mem 0x0008d800-0x0008ffff]
[    0.268241] e820: reserve RAM buffer [mem 0xb8d36000-0xbbffffff]
[    0.268244] e820: reserve RAM buffer [mem 0xb8eb6000-0xbbffffff]
[    0.268247] e820: reserve RAM buffer [mem 0xb9bae000-0xbbffffff]
[    0.268250] e820: reserve RAM buffer [mem 0xb9d66000-0xbbffffff]
[    0.268253] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
[    0.268480] NetLabel: Initializing
[    0.268483] NetLabel:  domain hash size = 128
[    0.268485] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.268505] NetLabel:  unlabeled traffic allowed by default
[    0.268832] amd_nb: Cannot enumerate AMD northbridges
[    0.268874] clocksource: Switched to clocksource refined-jiffies
[    0.280588] AppArmor: AppArmor Filesystem Enabled
[    0.280714] pnp: PnP ACPI init
[    0.280824] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.281097] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.281103] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.281107] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.281112] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.281119] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.281241] system 00:02: [io  0x03f8-0x0411] could not be reserved
[    0.281249] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.281389] pnp 00:03: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.281481] pnp 00:04: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.281936] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.281942] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.281947] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.281951] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved
[    0.281956] system 00:05: [mem 0xfed0c000-0xfed0ffff] has been reserved
[    0.281960] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.281965] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.281969] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.281974] system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.281980] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.283552] pnp: PnP ACPI: found 6 devices
[    0.296588] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.296624] clocksource: Switched to clocksource acpi_pm
[    0.296669] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.296683] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.296690] pci 0000:00:1c.1:   bridge window [mem 0xd0700000-0xd07fffff]
[    0.296700] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.296704] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.296711] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.296720] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.296724] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.296728] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.296732] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.296736] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.296740] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.296744] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.296748] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xd0815ffe window]
[    0.296752] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd07fffff]
[    0.296757] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.296760] pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd06fffff]
[    0.296821] NET: Registered protocol family 2
[    0.297106] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.297244] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.297389] TCP: Hash tables configured (established 32768 bind 32768)
[    0.297455] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.297492] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.297621] NET: Registered protocol family 1
[    0.297651] pci 0000:00:02.0: Video device with shadowed ROM
[    0.297968] PCI: CLS 64 bytes, default 64
[    0.298075] Unpacking initramfs...
[    1.242684] Freeing initrd memory: 39316K
[    1.242764] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.242792] software IO TLB [mem 0xb4d36000-0xb8d36000] (64MB) mapped at [ffff8800b4d36000-ffff8800b8d35fff]
[    1.243085] Scanning for low memory corruption every 60 seconds
[    1.244085] audit: initializing netlink subsys (disabled)
[    1.244116] audit: type=2000 audit(1541955593.239:1): initialized
[    1.244712] Initialise system trusted keyring
[    1.245238] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.248320] zbud: loaded
[    1.249074] VFS: Disk quotas dquot_6.6.0
[    1.249147] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.249694] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.250519] fuse init (API version 7.23)
[    1.250836] Key type big_key registered
[    1.250864] Allocating IMA MOK and blacklist keyrings.
[    1.252730] Key type asymmetric registered
[    1.252737] Asymmetric key parser 'x509' registered
[    1.252986] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.253093] io scheduler noop registered
[    1.253099] io scheduler deadline registered (default)
[    1.253166] io scheduler cfq registered
[    1.254131] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.254211] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.254284] efifb: probing for efifb
[    1.254292] efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
[    1.254295] efifb: mode is 640x480x1, linelength=80, pages=1
[    1.254297] efifb: scrolling: redraw
[    1.254300] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.254474] Console: switching to colour frame buffer device 80x30
[    1.254491] fb0: EFI VGA frame buffer device
[    1.254510] intel_idle: MWAIT substates: 0x33000020
[    1.254513] intel_idle: v0.4.1 model 0x37
[    1.254516] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.255004] ACPI: AC Adapter [AC0] (off-line)
[    1.255135] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.255141] ACPI: Power Button [PWRB]
[    1.255226] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.256312] ACPI: Lid Switch [LID]
[    1.256391] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.256397] ACPI: Sleep Button [SLPB]
[    1.256472] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.256478] ACPI: Power Button [PWRF]
[    1.261550] thermal LNXTHERM:00: registered as thermal_zone0
[    1.261555] ACPI: Thermal Zone [THRM] (0 C)
[    1.261646] GHES: HEST is not enabled!
[    1.261846] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.282433] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.286720] hpet: number irqs doesn't agree with number of timers
[    1.286833] Linux agpgart interface v0.103
[    1.290716] loop: module loaded
[    1.291144] libphy: Fixed MDIO Bus: probed
[    1.291151] tun: Universal TUN/TAP device driver, 1.6
[    1.291153] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.291253] PPP generic driver version 2.4.2
[    1.291372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.291382] ehci-pci: EHCI PCI platform driver
[    1.291403] ehci-platform: EHCI generic platform driver
[    1.291429] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.291438] ohci-pci: OHCI PCI platform driver
[    1.291459] ohci-platform: OHCI generic platform driver
[    1.291477] uhci_hcd: USB Universal Host Controller Interface driver
[    1.291724] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.291739] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.292865] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    1.292872] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.293061] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.293066] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.293070] usb usb1: Product: xHCI Host Controller
[    1.293074] usb usb1: Manufacturer: Linux 4.4.0-138-generic xhci-hcd
[    1.293077] usb usb1: SerialNumber: 0000:00:14.0
[    1.293338] hub 1-0:1.0: USB hub found
[    1.293361] hub 1-0:1.0: 6 ports detected
[    1.294815] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.294824] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.294904] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.294909] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.294912] usb usb2: Product: xHCI Host Controller
[    1.294916] usb usb2: Manufacturer: Linux 4.4.0-138-generic xhci-hcd
[    1.294919] usb usb2: SerialNumber: 0000:00:14.0
[    1.295237] hub 2-0:1.0: USB hub found
[    1.295253] hub 2-0:1.0: 1 port detected
[    1.295545] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.298787] i8042: Detected active multiplexing controller, rev 1.1
[    1.384842] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.384852] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.384919] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.386141] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.386203] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.388089] mousedev: PS/2 mouse device common for all mice
[    1.388883] ACPI: Battery Slot [BAT0] (battery present)
[    1.389336] rtc_cmos 00:00: RTC can wake from S4
[    1.389503] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.389540] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[    1.389558] i2c /dev entries driver
[    1.389668] device-mapper: uevent: version 1.0.3
[    1.389951] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.389977] Intel P-state driver initializing.
[    1.390332] ledtrig-cpu: registered to indicate activity on CPUs
[    1.393237] NET: Registered protocol family 10
[    1.394573] NET: Registered protocol family 17
[    1.394658] Key type dns_resolver registered
[    1.395310] microcode: CPU0 sig=0x30678, pf=0x8, revision=0x813
[    1.395413] microcode: CPU1 sig=0x30678, pf=0x8, revision=0x813
[    1.395422] microcode: CPU2 sig=0x30678, pf=0x8, revision=0x813
[    1.395497] microcode: CPU3 sig=0x30678, pf=0x8, revision=0x813
[    1.395646] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.396159] registered taskstats version 1
[    1.396179] Loading compiled-in X.509 certificates
[    1.397643] Loaded X.509 cert 'Build time autogenerated kernel key: 9a104bc44b81e9426fe5c715e47d021d02d69eba'
[    1.397679] zswap: loaded using pool lzo/zbud
[    1.408414] Key type trusted registered
[    1.429639] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.430894] Key type encrypted registered
[    1.430908] AppArmor: AppArmor sha1 policy hashing enabled
[    1.430914] ima: No TPM chip found, activating TPM-bypass!
[    1.430951] ima: Allocated hash algorithm: sha1
[    1.430989] evm: HMAC attrs: 0x1
[    1.433075]   Magic number: 10:995:994
[    1.433195] memory memory37: hash matches
[    1.433494] rtc_cmos 00:00: setting system clock to 2018-11-11 16:59:53 UTC (1541955593)
[    1.434051] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.434055] EDD information not available.
[    1.434202] PM: Hibernation image not present or could not be loaded.
[    1.436658] Freeing unused kernel memory: 1528K
[    1.451528] Write protecting the kernel read-only data: 14336k
[    1.454155] Freeing unused kernel memory: 1664K
[    1.455477] Freeing unused kernel memory: 92K
[    1.501353] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
[    1.501407] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
[    1.502742] random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
[    1.502935] random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
[    1.502976] random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
[    1.519012] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    1.519069] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    1.519098] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    1.519638] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    1.519686] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    1.600995] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.601896] hidraw: raw HID events driver (C) Jiri Kosina
[    1.607360] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    1.633138] wmi: Mapper loaded
[    1.640355] ahci 0000:00:13.0: version 3.0
[    1.640579] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[    1.640585] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm apst 
[    1.641173] scsi host0: ahci
[    1.641400] scsi host1: ahci
[    1.641484] ata1: SATA max UDMA/133 abar m2048@0xd0815000 port 0xd0815100 irq 88
[    1.641487] ata2: DUMMY
[    1.643077] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 89
[    1.645409] [drm] Initialized drm 1.1.0 20060810
[    1.649860] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.649876] r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control
[    1.650951] r8169 0000:03:00.2 eth0: RTL8402 at 0xffffc9000075e000, 10:c3:7b:b8:52:db, XID 04000800 IRQ 90
[    1.696691] [drm] Memory usable by graphics device = 2048M
[    1.696698] checking generic (a0000 10000) vs hw (c0000000 10000000)
[    1.696701] fb: switching to inteldrmfb from EFI VGA
[    1.696742] Console: switching to colour dummy device 80x25
[    1.696825] [drm] Replacing VGA console driver
[    1.697041] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.697044] [drm] Driver supports precise vblank timestamp query.
[    1.719246] r8169 0000:03:00.2 enp3s0f2: renamed from eth0
[    1.742501] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.763670] usb 1-2: not running at top speed; connect to a high speed hub
[    1.777012] usb 1-2: New USB device found, idVendor=0457, idProduct=1029
[    1.777020] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.777024] usb 1-2: Product: SiS HID Touch Controller
[    1.777027] usb 1-2: Manufacturer: USBest Technology
[    1.803575] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.809271] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[    1.809677] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    1.813329] fbcon: inteldrmfb (fb0) is primary device
[    1.813432] Console: switching to colour frame buffer device 170x48
[    1.813466] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.943696] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[    1.959760] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.961087] ata1.00: ATA-9: WDC WD5000LPVX-80V0TT0, 01.01A01, max UDMA/133
[    1.961094] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.962533] ata1.00: configured for UDMA/133
[    1.963485] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-8 1A01 PQ: 0 ANSI: 5
[    1.964727] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.964734] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.964790] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.964922] sd 0:0:0:0: [sda] Write Protect is off
[    1.964929] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.964971] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.045340]  sda: sda1 sda2 < sda5 sda6 >
[    2.046583] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.108449] usb 1-3: New USB device found, idVendor=04f2, idProduct=b409
[    2.108456] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.108460] usb 1-3: Product: USB2.0 HD UVC WebCam
[    2.108463] usb 1-3: Manufacturer: Chicony Electronics Co.,Ltd.
[    2.108467] usb 1-3: SerialNumber: 0x0001
[    2.223748] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    2.244159] tsc: Refined TSC clocksource calibration: 2166.666 MHz
[    2.244185] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f3b3172f25, max_idle_ns: 440795274731 ns
[    2.298195] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x461f1a)
[    2.315455] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0c.
[    2.330916] psmouse serio4: elantech: Elan sample query result 1c, 79, 75
[    2.353951] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608
[    2.353958] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.353961] usb 1-4: Product: USB2.0 Hub
[    2.355350] hub 1-4:1.0: USB hub found
[    2.355614] hub 1-4:1.0: 3 ports detected
[    2.356644] usb: port power management may be unreliable
[    2.369676] usbcore: registered new interface driver usbhid
[    2.369681] usbhid: USB HID core driver
[    2.411667] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12
[    2.628607] usb 1-4.1: new full-speed USB device number 5 using xhci_hcd
[    2.719376] usb 1-4.1: New USB device found, idVendor=13d3, idProduct=3408
[    2.719383] usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.245847] clocksource: Switched to clocksource tsc
[    3.601652] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    5.206487] random: nonblocking pool is initialized
[    6.602856] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    6.603157] systemd[1]: Detected architecture x86-64.
[    6.609389] systemd[1]: Set hostname to <elrockito-X200MA>.
[    9.264796] systemd[1]: Listening on Syslog Socket.
[    9.264989] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    9.265046] systemd[1]: Listening on fsck to fsckd communication Socket.
[    9.265130] systemd[1]: Listening on Journal Socket.
[    9.265162] systemd[1]: Reached target Encrypted Volumes.
[    9.265238] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.265427] systemd[1]: Created slice User and Session Slice.
[    9.265448] systemd[1]: Reached target Remote File Systems (Pre).
[    9.265471] systemd[1]: Reached target Remote File Systems.
[    9.265492] systemd[1]: Reached target User and Group Name Lookups.
[    9.265550] systemd[1]: Listening on udev Kernel Socket.
[    9.265682] systemd[1]: Listening on Journal Audit Socket.
[    9.265828] systemd[1]: Created slice System Slice.
[    9.280088] systemd[1]: Starting Journal Service...
[    9.281370] systemd[1]: Starting Set console keymap...
[    9.282647] systemd[1]: Mounting POSIX Message Queue File System...
[    9.283947] systemd[1]: Mounting Huge Pages File System...
[    9.284028] systemd[1]: Reached target Slices.
[    9.285204] systemd[1]: Starting Nameserver information manager...
[    9.286350] systemd[1]: Starting Uncomplicated firewall...
[    9.363414] systemd[1]: Starting Load Kernel Modules...
[    9.364683] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    9.364971] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    9.366240] systemd[1]: Starting Remount Root and Kernel File Systems...
[    9.367541] systemd[1]: Started Read required files in advance.
[    9.368186] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.368664] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    9.403308] systemd[1]: Mounting Debug File System...
[    9.404859] systemd[1]: Started Braille Device Support.
[    9.406041] systemd[1]: Listening on udev Control Socket.
[    9.406155] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    9.585797] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    9.595815] systemd[1]: Starting Create Static Device Nodes in /dev...
[    9.673284] systemd[1]: Mounted Debug File System.
[    9.673435] systemd[1]: Mounted POSIX Message Queue File System.
[    9.673523] systemd[1]: Mounted Huge Pages File System.
[    9.749831] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[    9.751296] systemd[1]: Started Remount Root and Kernel File Systems.
[    9.764061] systemd[1]: Starting Load/Save Random Seed...
[   10.000377] systemd[1]: Starting udev Coldplug all Devices...
[   10.001769] systemd[1]: Started Nameserver information manager.
[   10.018047] systemd[1]: Reached target Network (Pre).
[   10.024550] systemd[1]: Started Load/Save Random Seed.
[   10.164661] systemd[1]: Started Journal Service.
[   10.345576] lp: driver loaded but no devices found
[   10.357950] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.428035] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   10.490768] ppdev: user-space parallel port driver
[   10.711876] systemd-journald[265]: Received request to flush runtime journal from PID 1
[   10.844285] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   15.293907] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.298732] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[   15.298739] mei_txe 0000:00:1a.0: PCI INT A: no GSI
[   15.681245] [drm] GMBUS [i915 gmbus ssc] timed out, falling back to bit banging on pin 1
[   15.749472] [drm] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[   15.937834] [drm] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6
[   16.282549] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   16.605224] Bluetooth: Core ver 2.21
[   16.605247] NET: Registered protocol family 31
[   16.605250] Bluetooth: HCI device and connection manager initialized
[   16.605256] Bluetooth: HCI socket layer initialized
[   16.605261] Bluetooth: L2CAP socket layer initialized
[   16.605270] Bluetooth: SCO socket layer initialized
[   16.620232] input: USBest Technology SiS HID Touch Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0457:1029.0001/input/input14
[   16.620541] hid-multitouch 0003:0457:1029.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [USBest Technology SiS HID Touch Controller] on usb-0000:00:14.0-2/input0
[   16.726507] media: Linux media interface: v0.10
[   16.837420] Linux video capture interface: v2.00
[   16.877796] usbcore: registered new interface driver btusb
[   16.998565] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   16.998573] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.998577] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   16.998580] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   16.998583] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   16.998587] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1b
[   17.128835] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   17.128957] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   17.401852] asus_wmi: ASUS WMI generic driver loaded
[   17.426198] asus_wmi: Initialization: 0x1
[   17.426270] asus_wmi: BIOS WMI version: 7.9
[   17.426355] asus_wmi: SFUN value: 0x4a0877
[   17.428141] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input18
[   17.431298] asus_wmi: Number of fans: 1
[   17.454970] ath: phy0: WB335 2-ANT card detected
[   17.454975] ath: phy0: Set BT/WLAN RX diversity capability
[   17.461528] ath: phy0: Enable LNA combining
[   17.464204] ath: phy0: ASPM enabled: 0x42
[   17.464210] ath: EEPROM regdomain: 0x60
[   17.464212] ath: EEPROM indicates we should expect a direct regpair map
[   17.464216] ath: Country alpha2 being used: 00
[   17.464218] ath: Regpair used: 0x60
[   17.536561] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   17.537100] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90000900000, irq=17
[   17.561485] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   17.588833] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b409)
[   17.590113] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input19
[   17.590236] usbcore: registered new interface driver uvcvideo
[   17.590238] USB Video Class driver (1.1.1)
[   17.616112] usbcore: registered new interface driver ath3k
[   17.705688] usb 1-4.1: USB disconnect, device number 5
[   17.847810] cfg80211: World regulatory domain updated:
[   17.847815] cfg80211:  DFS Master region: unset
[   17.847818] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   17.847822] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   17.847825] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   17.847828] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   17.847831] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   17.847835] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   17.847838] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   17.847841] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   17.847844] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   17.904810] usb 1-4.1: new full-speed USB device number 6 using xhci_hcd
[   17.994292] usb 1-4.1: New USB device found, idVendor=13d3, idProduct=3408
[   17.994298] usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   18.268027] intel_soc_dts_thermal: request_threaded_irq ret -22
[   18.294367] intel_soc_dts_thermal: request_threaded_irq ret -22
[   18.330110] intel_soc_dts_thermal: request_threaded_irq ret -22
[   18.341862] intel_rapl: Found RAPL domain package
[   18.341869] intel_rapl: Found RAPL domain core
[   21.930887] Adding 3905532k swap on /dev/sda1.  Priority:-1 extents:1 across:3905532k FS
[   23.890512] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   25.946488] audit: type=1400 audit(1541955617.969:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=832 comm="apparmor_parser"
[   25.946504] audit: type=1400 audit(1541955617.969:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=832 comm="apparmor_parser"
[   25.979666] audit: type=1400 audit(1541955618.005:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=833 comm="apparmor_parser"
[   25.979685] audit: type=1400 audit(1541955618.005:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=833 comm="apparmor_parser"
[   25.979695] audit: type=1400 audit(1541955618.005:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=833 comm="apparmor_parser"
[   25.979706] audit: type=1400 audit(1541955618.005:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=833 comm="apparmor_parser"
[   26.056343] audit: type=1400 audit(1541955618.077:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=836 comm="apparmor_parser"
[   26.134367] audit: type=1400 audit(1541955618.157:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=838 comm="apparmor_parser"
[   26.192281] audit: type=1400 audit(1541955618.213:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=840 comm="apparmor_parser"
[   26.236989] audit: type=1400 audit(1541955618.261:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=834 comm="apparmor_parser"
[   31.013017] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   31.013024] Bluetooth: BNEP filters: protocol multicast
[   31.013033] Bluetooth: BNEP socket layer initialized
[   34.972525] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   34.984449] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   34.992810] IPv6: ADDRCONF(NETDEV_UP): enp3s0f2: link is not ready
[   35.161974] r8169 0000:03:00.2 enp3s0f2: link down
[   35.162048] IPv6: ADDRCONF(NETDEV_UP): enp3s0f2: link is not ready
[   39.718163] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  951.554392] wlp2s0: authenticate with 68:a3:78:8c:4c:70
[  951.566265] wlp2s0: send auth to 68:a3:78:8c:4c:70 (try 1/3)
[  951.568737] wlp2s0: authenticated
[  951.574738] wlp2s0: associate with 68:a3:78:8c:4c:70 (try 1/3)
[  951.578843] wlp2s0: RX AssocResp from 68:a3:78:8c:4c:70 (capab=0x411 status=0 aid=2)
[  951.578943] wlp2s0: associated
[  951.579003] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  953.992864] [UFW BLOCK] IN=wlp2s0 OUT= MAC=54:27:1e:c8:5f:21:68:a3:78:8c:4c:6f:08:00 SRC=192.168.1.254 DST=192.168.1.13 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=12201 DF PROTO=TCP SPT=45208 DPT=8200 WINDOW=29200 RES=0x00 SYN URGP=0 
[  954.943435] [UFW BLOCK] IN=wlp2s0 OUT= MAC=54:27:1e:c8:5f:21:68:a3:78:8c:4c:6f:08:00 SRC=192.168.1.254 DST=192.168.1.13 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=12202 DF PROTO=TCP SPT=45208 DPT=8200 WINDOW=29200 RES=0x00 SYN URGP=0 
[ 1840.234858] [UFW BLOCK] IN=wlp2s0 OUT= MAC=54:27:1e:c8:5f:21:68:a3:78:8c:4c:6f:08:00 SRC=192.168.1.254 DST=192.168.1.13 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=61322 DF PROTO=TCP SPT=45678 DPT=8200 WINDOW=29200 RES=0x00 SYN URGP=0 
[ 1841.241280] [UFW BLOCK] IN=wlp2s0 OUT= MAC=54:27:1e:c8:5f:21:68:a3:78:8c:4c:6f:08:00 SRC=192.168.1.254 DST=192.168.1.13 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=61323 DF PROTO=TCP SPT=45678 DPT=8200 WINDOW=29200 RES=0x00 SYN URGP=0 
[ 2736.768657] [UFW BLOCK] IN=wlp2s0 OUT= MAC=54:27:1e:c8:5f:21:68:a3:78:8c:4c:6f:08:00 SRC=192.168.1.254 DST=192.168.1.13 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=53529 DF PROTO=TCP SPT=46150 DPT=8200 WINDOW=29200 RES=0x00 SYN URGP=0 
[ 2737.778384] [UFW BLOCK] IN=wlp2s0 OUT= MAC=54:27:1e:c8:5f:21:68:a3:78:8c:4c:6f:08:00 SRC=192.168.1.254 DST=192.168.1.13 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=53530 DF PROTO=TCP SPT=46150 DPT=8200 WINDOW=29200 RES=0x00 SYN URGP=0 
[ 2799.301453] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 2799.680353] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=1018 TOS=0x00 PREC=0x00 TTL=1 ID=10 PROTO=UDP SPT=57934 DPT=3702 LEN=998 
[ 2799.784421] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=1018 TOS=0x00 PREC=0x00 TTL=1 ID=11 PROTO=UDP SPT=57934 DPT=3702 LEN=998 
[ 2800.882249] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=17 PROTO=UDP SPT=57936 DPT=3702 LEN=664 
[ 2801.076177] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=18 PROTO=UDP SPT=57936 DPT=3702 LEN=664 
[ 2802.110884] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=1018 TOS=0x00 PREC=0x00 TTL=1 ID=21 PROTO=UDP SPT=57934 DPT=3702 LEN=998 
[ 2802.243052] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=1018 TOS=0x00 PREC=0x00 TTL=1 ID=22 PROTO=UDP SPT=57934 DPT=3702 LEN=998 
[ 2802.862745] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=1018 TOS=0x00 PREC=0x00 TTL=1 ID=28 PROTO=UDP SPT=57934 DPT=3702 LEN=998 
[ 2810.922573] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=47 PROTO=UDP SPT=57973 DPT=3702 LEN=664 
[ 2811.119218] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=50 PROTO=UDP SPT=57973 DPT=3702 LEN=664 
[ 2831.205198] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=168 PROTO=UDP SPT=57382 DPT=3702 LEN=664 
[ 2831.408063] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=172 PROTO=UDP SPT=57382 DPT=3702 LEN=664 
[ 2841.445037] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=366 PROTO=UDP SPT=64162 DPT=3702 LEN=664 
[ 2862.121933] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=764 PROTO=UDP SPT=49267 DPT=3702 LEN=664 
[ 2885.358561] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=3525 PROTO=UDP SPT=55708 DPT=3702 LEN=664 
[ 2907.610807] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=4970 PROTO=UDP SPT=61340 DPT=3702 LEN=664 
[ 2925.727612] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=4994 PROTO=UDP SPT=58744 DPT=3702 LEN=664 
[ 2957.234999] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=5012 PROTO=UDP SPT=58746 DPT=3702 LEN=664 
[ 2969.893508] [UFW BLOCK] IN=wlp2s0 OUT= MAC=54:27:1e:c8:5f:21:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=192.168.1.13 LEN=52 TOS=0x00 PREC=0x00 TTL=128 ID=5023 DF PROTO=TCP SPT=49322 DPT=8200 WINDOW=8192 RES=0x00 SYN URGP=0 
[ 3007.056272] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=5147 PROTO=UDP SPT=63655 DPT=3702 LEN=664 
[ 3007.062101] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=5148 PROTO=UDP SPT=63655 DPT=3702 LEN=664 
[ 3086.416736] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=801 TOS=0x00 PREC=0x00 TTL=1 ID=5214 PROTO=UDP SPT=57934 DPT=3702 LEN=781 
[ 3086.618538] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:7f:ff:fa:74:2f:68:7e:c4:95:08:00 SRC=192.168.1.16 DST=239.255.255.250 LEN=801 TOS=0x00 PREC=0x00 TTL=1 ID=5226 PROTO=UDP SPT=57934 DPT=3702 LEN=781 
[ 3633.278498] [UFW BLOCK] IN=wlp2s0 OUT= MAC=54:27:1e:c8:5f:21:68:a3:78:8c:4c:6f:08:00 SRC=192.168.1.254 DST=192.168.1.13 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=61189 DF PROTO=TCP SPT=46650 DPT=8200 WINDOW=29200 RES=0x00 SYN URGP=0 
[ 3634.306258] [UFW BLOCK] IN=wlp2s0 OUT= MAC=54:27:1e:c8:5f:21:68:a3:78:8c:4c:6f:08:00 SRC=192.168.1.254 DST=192.168.1.13 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=61190 DF PROTO=TCP SPT=46650 DPT=8200 WINDOW=29200 RES=0x00 SYN URGP=0 
[ 3814.826177] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:48:5a:b6:09:c5:9d:86:dd SRC=2a01:0e34:ef4a:37a0:774b:c7fc:7254:dc93 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=334872 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[ 3814.827058] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:48:5a:b6:09:c5:9d:86:dd SRC=2a01:0e34:ef4a:37a0:774b:c7fc:7254:dc93 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=791476 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[ 3814.828752] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:48:5a:b6:09:c5:9d:86:dd SRC=fe80:0000:0000:0000:42f5:0207:0a94:ba61 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=702778 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[ 3814.829928] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:48:5a:b6:09:c5:9d:86:dd SRC=fe80:0000:0000:0000:42f5:0207:0a94:ba61 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=914696 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[ 3855.391724] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:48:5a:b6:09:c5:9d:86:dd SRC=2a01:0e34:ef4a:37a0:774b:c7fc:7254:dc93 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=334872 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[ 3855.393264] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:48:5a:b6:09:c5:9d:86:dd SRC=2a01:0e34:ef4a:37a0:774b:c7fc:7254:dc93 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=791476 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[ 3855.394521] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:48:5a:b6:09:c5:9d:86:dd SRC=fe80:0000:0000:0000:42f5:0207:0a94:ba61 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=702778 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[ 3855.396247] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:48:5a:b6:09:c5:9d:86:dd SRC=fe80:0000:0000:0000:42f5:0207:0a94:ba61 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=914696 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[ 3863.268862] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:48:5a:b6:09:c5:9d:86:dd SRC=2a01:0e34:ef4a:37a0:774b:c7fc:7254:dc93 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=334872 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[ 3863.270021] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:48:5a:b6:09:c5:9d:86:dd SRC=2a01:0e34:ef4a:37a0:774b:c7fc:7254:dc93 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=791476 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[ 3863.271315] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:48:5a:b6:09:c5:9d:86:dd SRC=fe80:0000:0000:0000:42f5:0207:0a94:ba61 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=702778 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[ 3863.272397] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:48:5a:b6:09:c5:9d:86:dd SRC=fe80:0000:0000:0000:42f5:0207:0a94:ba61 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=914696 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[ 3880.992082] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:48:5a:b6:09:c5:9d:86:dd SRC=2a01:0e34:ef4a:37a0:774b:c7fc:7254:dc93 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=334872 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[ 3910.530160] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:48:5a:b6:09:c5:9d:86:dd SRC=2a01:0e34:ef4a:37a0:774b:c7fc:7254:dc93 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=334872 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[ 4529.802362] [UFW BLOCK] IN=wlp2s0 OUT= MAC=54:27:1e:c8:5f:21:68:a3:78:8c:4c:6f:08:00 SRC=192.168.1.254 DST=192.168.1.13 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=19874 DF PROTO=TCP SPT=47124 DPT=8200 WINDOW=29200 RES=0x00 SYN URGP=0 
[ 4530.859712] [UFW BLOCK] IN=wlp2s0 OUT= MAC=54:27:1e:c8:5f:21:68:a3:78:8c:4c:6f:08:00 SRC=192.168.1.254 DST=192.168.1.13 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=19875 DF PROTO=TCP SPT=47124 DPT=8200 WINDOW=29200 RES=0x00 SYN URGP=0 
[ 5426.326617] [UFW BLOCK] IN=wlp2s0 OUT= MAC=54:27:1e:c8:5f:21:68:a3:78:8c:4c:6f:08:00 SRC=192.168.1.254 DST=192.168.1.13 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=45034 DF PROTO=TCP SPT=47602 DPT=8200 WINDOW=29200 RES=0x00 SYN URGP=0 
[ 5427.389935] [UFW BLOCK] IN=wlp2s0 OUT= MAC=54:27:1e:c8:5f:21:68:a3:78:8c:4c:6f:08:00 SRC=192.168.1.254 DST=192.168.1.13 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=45035 DF PROTO=TCP SPT=47602 DPT=8200 WINDOW=29200 RES=0x00 SYN URGP=0 

merci


“N'allez pas là où le chemin peut mener. Allez là où il n'y a pas de chemin et laissez une trace.”
De Ralph Waldo Emerson

VOYAGER 16.04.01 LTS 64         Kernel    : Linux 4.4.0-59-generic

Hors ligne

#8 Le 11/11/2018, à 20:19

inbox

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

Toujours aucune trace du branchement d'un support USB.

1/ As-tu bien essayé sur un autre port ?
2/ Peux-tu brancher une autre clef USB pour tester et donner le retour de : dmesg | grep sd
3/ Utilises-tu un hub USB (un multiprise USB en somme) ? Si oui, ne l'utilise pas.


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#9 Le 11/11/2018, à 20:27

elrockito

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

1: oui teste sur d'autre ports
2: voici la reponse d'une autre clé sur le meme port avec la commande

▶ dmesg | grep sd
[    1.964727] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.964734] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.964790] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.964922] sd 0:0:0:0: [sda] Write Protect is off
[    1.964929] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.964971] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.045340]  sda: sda1 sda2 < sda5 sda6 >
[    2.046583] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.601652] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    9.749831] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   21.930887] Adding 3905532k swap on /dev/sda1.  Priority:-1 extents:1 across:3905532k FS
[   23.890512] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 8721.136243] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 8721.137753] sd 2:0:0:0: [sdb] 30529536 512-byte logical blocks: (15.6 GB/14.6 GiB)
[ 8721.139317] sd 2:0:0:0: [sdb] Write Protect is off
[ 8721.139331] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 8721.141957] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 8721.158961]  sdb: sdb1 sdb2
[ 8721.161538] sd 2:0:0:0: [sdb] Attached SCSI removable disk

3: non directement sur le port du portable


“N'allez pas là où le chemin peut mener. Allez là où il n'y a pas de chemin et laissez une trace.”
De Ralph Waldo Emerson

VOYAGER 16.04.01 LTS 64         Kernel    : Linux 4.4.0-59-generic

Hors ligne

#10 Le 11/11/2018, à 20:30

inbox

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

Je pense donc que la clef est complètement HS. Dans le cas contraire, on aurait au moins quelques lignes indiquant qu'un périphérique a été branché, même en mauvais état.


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#11 Le 11/11/2018, à 20:33

elrockito

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

et comment est ce possible clé quasi neuve et peut utilisée. De plus il fait attention lors de son retrait


“N'allez pas là où le chemin peut mener. Allez là où il n'y a pas de chemin et laissez une trace.”
De Ralph Waldo Emerson

VOYAGER 16.04.01 LTS 64         Kernel    : Linux 4.4.0-59-generic

Hors ligne

#12 Le 11/11/2018, à 20:36

inbox

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

Je ne peux répondre à cette question.

As-tu tenté de brancher ta clef sur un système ? Avec quel résultat ?


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#13 Le 11/11/2018, à 20:37

elrockito

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

Oui teste aussi sur un W$ mais aucun résultat!!!   :-(((((


“N'allez pas là où le chemin peut mener. Allez là où il n'y a pas de chemin et laissez une trace.”
De Ralph Waldo Emerson

VOYAGER 16.04.01 LTS 64         Kernel    : Linux 4.4.0-59-generic

Hors ligne

#14 Le 11/11/2018, à 20:40

inbox

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

Je confirme donc : la clef est HS.


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#15 Le 11/11/2018, à 20:45

elrockito

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

Mer..   

confirmation de mes doutes et surtout des craintes de mon fils.


Mais heureusement on a de bonnes habitudes, sauvegarde régulières sur divers supports


“N'allez pas là où le chemin peut mener. Allez là où il n'y a pas de chemin et laissez une trace.”
De Ralph Waldo Emerson

VOYAGER 16.04.01 LTS 64         Kernel    : Linux 4.4.0-59-generic

Hors ligne

#16 Le 11/11/2018, à 20:48

inbox

Re : Cle USB non reconnue non montée [ RESOLU] cle foutue

Avec les clef USB, il faut toujours considérer qu'elles peuvent claquer à tout moment. Leur contenu ne doit dons être qu'une copie de transport et non pas une sauvegarde.


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne