Ubuntu-fr

axel584

[Résolu] Problème au démarrage

Bonjour,
Après avoir installé mon Ubuntu, j'ai le problème suivant :
Capture d'écran du problème

A noter que tout fonctionne bien avec le live USB.
J'ai essayé de récupérer quelques infos sur mon système avec boot-info (mais j'ai récupéré ces infos dans le live USB, donc je ne sais pas si ça change quelque chose).

La commande

sudo lshw -C DISPLAY

m'affiche :

 *-display                 
       description: VGA compatible controller
       produit: GP107 [GeForce GTX 1050]
       fabriquant: NVIDIA Corporation
       identifiant matériel: 0
       information bus: pci@0000:01:00.0
       version: a1
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
       configuration: driver=nouveau latency=0
       ressources: irq:28 mémoire:f6000000-f6ffffff mémoire:e0000000-efffffff mémoire:f0000000-f1ffffff portE/S:e000(taille=128) mémoire:f7000000-f707ffff
  *-display
       description: VGA compatible controller
       produit: Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller
       fabriquant: Intel Corporation
       identifiant matériel: 2
       information bus: pci@0000:00:02.0
       version: 06
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: msi pm vga_controller bus_master cap_list
       configuration: driver=i915 latency=0
       ressources: irq:27 mémoire:f7400000-f77fffff mémoire:d0000000-dfffffff portE/S:f000(taille=64)

Un truc étrange c'est que quand je boote sur l'USB, le logo Ubuntu (sur fond mauve) est plus petit que quand je démarre sur mon disque dur... Comme si la résolution de mon installe sur disque dur était moins élevée.

Merci pour votre aide,

Axel

Dernière modification par bruno (Le 10/12/2018, à 18:15)

NicoApi73

Re : [Résolu] Problème au démarrage

Bonjour,

Peux tu mettre ton retour entre balises code STP?

Si j'ai bien compris tu as fait le lshw à partir de la session live. Je suppose que tu es dans la même configuration pour ta session installée. Si ce n'est pas le cas, merci de le préciser.

       produit: GP107 [GeForce GTX 1050]
       configuration: driver=nouveau latency=0

Le driver libre nouveau prend très mal en charge ce type de carte. Il faut que tu installes le driver propriétaire nVidia. Si tu arrives à booter sur ta session installée, vas dans le Gestionnaire de mises à jour, Paramètres, Pilotes additionnels et installe le driver propriétaire nVidia (le 390). Si tu n'arrives pas à booter, fais le savoir.

axel584

Re : [Résolu] Problème au démarrage

Effectivement, je n'arrive pas à booter, j'avais mis une capture d'écran, mais ça n'a pas fonctionné.
Je vais réessayer de montrer mon écran avec un lien sur imgur.

Du coup, je n'ai aucune idée de comment installer un driver propriétaire nVidia sur ma partition installée alors que je n'arrive à me connecter que sur le live USB.

Y'a t'il un moyen de démarrer ma partition installée en mode texte uniquement ? J'avais l'habitude de faire control+F7 pour avoir un shell, mais ça ne semble plus fonctionner.

Merci pour votre aide,

Axel

xubu1957

Re : [Résolu] Problème au démarrage

Bonjour,

Pour ajouter toi-même les balises code à ton précédent message #1 :                Merci           

• Cliquer sur  le lien « Modifier » en bas à droite du message

• Sélectionner le texte

• Cliquer sur le <> de l'éditeur de message

comme indiqué dans le : Retour utilisable de commande

Dernière modification par xubu1957 (Le 29/11/2018, à 21:36)

---

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

NicoApi73

Re : [Résolu] Problème au démarrage

ctrl+alt+F2 pour lancer un shell.

Déasctive également le sécure boot.

Tu as besoin d'installer le driver nVidia. Pour ça, il vaut mieux que tu essaies de booter ta session installée en passant modprobe.blacklist=nouveau à la volée

DidierS

Re : [Résolu] Problème au démarrage

Que se passe t-il précisément quand tu boot le PC?

---

PC bureau  I7 intel 2.3Gz 8Go Ram Ubuntu 18.04.1 LTS
PC Bureau I3 intel 3.4Gz 4Go Ram 18.04.1 LTS
Portable Acer Intel Core I5 4Go Ram Ubuntu 18.04.1 LTS
Imprimante Epson BX-305-FW Plus

axel584

Re : [Résolu] Problème au démarrage

Quand je boote mon PC, il m'affiche le menu UEFI qui me propose de booter normalement ou en mode sans échec, après, il m'affiche le logo Ubuntu sur fond mauve avec des points blancs en dessous qui clignotent et enfin, il revient sur l'écran noir que j'ai pris en photo dans mon premier post.

NicoApi73

Re : [Résolu] Problème au démarrage

Le menu UEFI auquel tu fais référence doit être grub.

Dans ce menu, tu restes positionné sur Ubuntu et tu appuies sur e (la lettre)

Une nouvelle fenêtre va apparaître. Tu te positionnes avec les flèches du clavier juste après quiet splash et tu passes une espace (juste avant $vt.handof). Tu ajoutes modprobe.blacklist=nouveau probablement en tapant ,odprobe:blqcklist=nouvequ
Tu valides par F10.

Ca devrait booter.

Une fois booté, tu installes le driver nVidia comme indiqué au #2

Dernière modification par NicoApi73 (Le 29/11/2018, à 21:26)

axel584

Re : [Résolu] Problème au démarrage

J'ai essayé d'ajouter mobprobe.blacklist=nouveau, mais ça n'a rien changé...

J'arrive toujours à un écran noir avec des trucs que je ne comprends pas quand j'essaye de booter sur mon disque dur alors que ça fonctionne bien sur le live USB.

Du coup, j'ai du mal à comprendre la différence entre les deux lancements.

1) Est-ce que le live USB contient les drivers propriétaires nvidia ? (j'ai créé mon USB à partir d'un outil sous windows et de l'ISO que j'ai télécharger sur le site officiel)

2) J'imagine que le système UEFI n'a pas de sens pour un livre USB ? c'est uniquement pour le démarrage sur un disque dur, non ? Comment je peux être sûr si mon ordi/disque dur fonctionne bien avec l'UEFI ? (bon, peut être que je focalise là dessus car c'est un truc que je ne connais pas)

Je suis prêt à réinstaller s'il le faut, mais je n'ai pas envie d'avoir de nouveau le même comportement.

Merci beaucoup pour votre aide,

Axel

NicoApi73

Re : [Résolu] Problème au démarrage

Ne réinstalle pas, il faut d'abord comprendre ce qu'il se passe.

As tu désactivé le secure boot? dans la photo d'écran que tu as mis, il y a des références au secure boot.

Pour te répondre :
1) non, la live usb utilise nouveau
2) si. La live peut se lancer soit en mode UEFI, soit en mode Legacy. Tu peux faire un boot-info. Lance une session live, ouvre un terminal est tape les commandes suivantes :

sudo add-apt-repository -y ppa:yannubuntu/boot-repair
sudo apt update 
sudo apt install -y boot-info
sudo boot-info 

axel584

Re : [Résolu] Problème au démarrage

Voici les infos sur mon live USB : http://paste.ubuntu.com/p/9tkBzj43PP/

J'y vois :

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)

Donc, ça ne semble ni un problème d'UEFI, ni un problème de driver de carte graphique ?

Merci pour votre aide,

Axel

NicoApi73

Re : [Résolu] Problème au démarrage

Le boot info complet :

Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => No boot loader is installed in the MBR of /dev/sdc.
 => Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdd.
 => No boot loader is installed in the MBR of /dev/sde.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi 
                       /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdc1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdd1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 6.03
    Boot sector info:  Syslinux looks at sector 30226 of /dev/sdd1 for its 
                       second stage. The integrity check of Syslinux failed. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

sde1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Unknown
    Boot sector info:  According to the info in the boot sector, sde1 starts 
                       at sector 0. But according to the info from fdisk, 
                       sde1 starts at sector 40.
    Operating System:  
    Boot files:        

sde2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb: ___________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 238.5 GiB, 256060514304 bytes, 500118192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   500,118,191   500,118,191  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2             1,050,624   466,780,159   465,729,536 Data partition (Linux)
/dev/sda3           466,780,160   500,117,503    33,337,344 Swap partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 4.6 TiB, 5000981078016 bytes, 9767541168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1                   1 4,294,967,295 4,294,967,295  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sdc1                 2,048 9,767,540,735 9,767,538,688 Data partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

Drive: sdd _____________________________________________________________________
Disk /dev/sdd: 58.8 GiB, 63065554944 bytes, 123174912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdd1    *          2,048   123,174,911   123,172,864   c W95 FAT32 (LBA)


Drive: sde _____________________________________________________________________
Disk /dev/sde: 3.7 TiB, 4000787030016 bytes, 7814037168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 33553920 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sde1                   1 4,294,967,294 4,294,967,294  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sde1                    40       409,639       409,600 EFI System partition
/dev/sde2               409,640 7,813,774,983 7,813,365,344 Data partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/loop7                                              squashfs   
/dev/sda1        6136-6CA6                              vfat       
/dev/sda2        3274034a-ce9a-498c-b671-b89c1c3af48f   ext4       
/dev/sda3        277865d8-15f4-41ab-9d74-4fcdd8961294   swap       
/dev/sdb         09701e79-57ae-4db0-b39d-6b88b83ba098   ext4       
/dev/sdc1        74f85f81-b13c-4541-bb7e-df1e563a9033   ext4       
/dev/sdd1        16EF-3132                              vfat       UBUNTU 18_0
/dev/sde1        70D6-1701                              vfat       EFI
/dev/sde2        9352becf-5d84-4fe0-835c-0266687ad409   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Nov 30 06:46 ata-Crucial_CT256MX100SSD1_14480DE6904E -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 30 06:46 ata-Crucial_CT256MX100SSD1_14480DE6904E-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 30 06:46 ata-Crucial_CT256MX100SSD1_14480DE6904E-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Nov 30 06:46 ata-Crucial_CT256MX100SSD1_14480DE6904E-part3 -> ../../sda3
lrwxrwxrwx 1 root root  9 Nov 30 06:46 ata-ST2000DM001-1ER164_W4Z19B05 -> ../../sdb
lrwxrwxrwx 1 root root  9 Nov 30 06:46 ata-TOSHIBA_HDWE150_17ESK1O5F57D -> ../../sdc
lrwxrwxrwx 1 root root 10 Nov 30 06:46 ata-TOSHIBA_HDWE150_17ESK1O5F57D-part1 -> ../../sdc1
lrwxrwxrwx 1 root root  9 Nov 30 06:46 usb-LaCie_d2_Quadra_v3C_0000000045066902105a-0:0 -> ../../sde
lrwxrwxrwx 1 root root 10 Nov 30 06:46 usb-LaCie_d2_Quadra_v3C_0000000045066902105a-0:0-part1 -> ../../sde1
lrwxrwxrwx 1 root root 10 Nov 30 06:46 usb-LaCie_d2_Quadra_v3C_0000000045066902105a-0:0-part2 -> ../../sde2
lrwxrwxrwx 1 root root  9 Nov 30 06:46 usb-SanDisk_Cruzer_Fit_4C530001121106123092-0:0 -> ../../sdd
lrwxrwxrwx 1 root root 10 Nov 30 06:46 usb-SanDisk_Cruzer_Fit_4C530001121106123092-0:0-part1 -> ../../sdd1
lrwxrwxrwx 1 root root  9 Nov 30 06:46 wwn-0x500003978c480bc3 -> ../../sdc
lrwxrwxrwx 1 root root 10 Nov 30 06:46 wwn-0x500003978c480bc3-part1 -> ../../sdc1
lrwxrwxrwx 1 root root  9 Nov 30 06:46 wwn-0x5000c5007d447ef3 -> ../../sdb
lrwxrwxrwx 1 root root  9 Nov 30 06:46 wwn-0x500a07510de6904e -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 30 06:46 wwn-0x500a07510de6904e-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 30 06:46 wwn-0x500a07510de6904e-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Nov 30 06:46 wwn-0x500a07510de6904e-part3 -> ../../sda3

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdd1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sde2        /media/ubuntu/9352becf-5d84-4fe0-835c-0266687ad409 ext4       (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)


========================== sda1/EFI/ubuntu/grub.cfg: ===========================

--------------------------------------------------------------------------------
search.fs_uuid 3274034a-ce9a-498c-b671-b89c1c3af48f root hd0,gpt2 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------

=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  3274034a-ce9a-498c-b671-b89c1c3af48f
else
  search --no-floppy --fs-uuid --set=root 3274034a-ce9a-498c-b671-b89c1c3af48f
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3274034a-ce9a-498c-b671-b89c1c3af48f' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  3274034a-ce9a-498c-b671-b89c1c3af48f
	else
	  search --no-floppy --fs-uuid --set=root 3274034a-ce9a-498c-b671-b89c1c3af48f
	fi
        linux	/boot/vmlinuz-4.15.0-39-generic root=UUID=3274034a-ce9a-498c-b671-b89c1c3af48f ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-39-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-3274034a-ce9a-498c-b671-b89c1c3af48f' {
	menuentry 'Ubuntu, avec Linux 4.15.0-39-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-39-generic-advanced-3274034a-ce9a-498c-b671-b89c1c3af48f' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  3274034a-ce9a-498c-b671-b89c1c3af48f
		else
		  search --no-floppy --fs-uuid --set=root 3274034a-ce9a-498c-b671-b89c1c3af48f
		fi
		echo	'Chargement de Linux 4.15.0-39-generic…'
	        linux	/boot/vmlinuz-4.15.0-39-generic root=UUID=3274034a-ce9a-498c-b671-b89c1c3af48f ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-39-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-39-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-39-generic-recovery-3274034a-ce9a-498c-b671-b89c1c3af48f' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  3274034a-ce9a-498c-b671-b89c1c3af48f
		else
		  search --no-floppy --fs-uuid --set=root 3274034a-ce9a-498c-b671-b89c1c3af48f
		fi
		echo	'Chargement de Linux 4.15.0-39-generic…'
	        linux	/boot/vmlinuz-4.15.0-39-generic root=UUID=3274034a-ce9a-498c-b671-b89c1c3af48f ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-39-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-advanced-3274034a-ce9a-498c-b671-b89c1c3af48f' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  3274034a-ce9a-498c-b671-b89c1c3af48f
		else
		  search --no-floppy --fs-uuid --set=root 3274034a-ce9a-498c-b671-b89c1c3af48f
		fi
		echo	'Chargement de Linux 4.15.0-29-generic…'
	        linux	/boot/vmlinuz-4.15.0-29-generic root=UUID=3274034a-ce9a-498c-b671-b89c1c3af48f ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-29-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-recovery-3274034a-ce9a-498c-b671-b89c1c3af48f' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  3274034a-ce9a-498c-b671-b89c1c3af48f
		else
		  search --no-floppy --fs-uuid --set=root 3274034a-ce9a-498c-b671-b89c1c3af48f
		fi
		echo	'Chargement de Linux 4.15.0-29-generic…'
	        linux	/boot/vmlinuz-4.15.0-29-generic root=UUID=3274034a-ce9a-498c-b671-b89c1c3af48f ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-29-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=3274034a-ce9a-498c-b671-b89c1c3af48f /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=6136-6CA6  /boot/efi       vfat    umask=0077      0       1
# /home was on /dev/sdb during installation
UUID=09701e79-57ae-4db0-b39d-6b88b83ba098 /home           ext4    defaults        0       2
UUID=74f85f81-b13c-4541-bb7e-df1e563a9033 /Filmoj	ext4	defaults	0	2
UUID=9352becf-5d84-4fe0-835c-0266687ad409	/Backup	ext4	defaults	0	2

# swap was on /dev/sda3 during installation
UUID=277865d8-15f4-41ab-9d74-4fcdd8961294 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 184.649852753 = 198.266269696  boot/grub/grub.cfg                             3
 184.641826630 = 198.257651712  boot/vmlinuz-4.15.0-29-generic                 1
 137.606338501 = 147.753680896  boot/vmlinuz-4.15.0-39-generic                 1
 184.641826630 = 198.257651712  vmlinuz                                        1
 138.070903778 = 148.252504064  boot/initrd.img-4.15.0-29-generic              2
 186.256038666 = 199.990898688  boot/initrd.img-4.15.0-39-generic              2
 138.070903778 = 148.252504064  initrd.img                                     2
 138.070903778 = 148.252504064  initrd.img.old                                 2

=========================== sdd1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

set timeout=5
menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  boot=casper integrity-check quiet splash ---
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sdd1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
DEFAULT loadconfig

LABEL loadconfig
  CONFIG /isolinux/isolinux.cfg
  APPEND /isolinux/
--------------------------------------------------------------------------------

=================== sdd1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdd1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             syslinux.cfg                                   1
            ?? = ??             ldlinux.sys                                    1

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sde1

00000000  eb 58 90 42 53 44 20 20  34 2e 34 00 02 01 20 00  |.X.BSD  4.4... .|
00000010  02 00 00 00 00 f0 00 00  20 00 10 00 00 00 00 00  |........ .......|
00000020  00 40 06 00 4f 0c 00 00  00 00 00 00 02 00 00 00  |.@..O...........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  00 00 29 01 17 d6 70 45  46 49 20 20 20 20 20 20  |..)...pEFI      |
00000050  20 20 46 41 54 33 32 20  20 20 fa 31 c0 8e d0 bc  |  FAT32   .1....|
00000060  00 7c fb 8e d8 e8 00 00  5e 83 c6 19 bb 07 00 fc  |.|......^.......|
00000070  ac 84 c0 74 06 b4 0e cd  10 eb f5 30 e4 cd 16 cd  |...t.......0....|
00000080  19 0d 0a 4e 6f 6e 2d 73  79 73 74 65 6d 20 64 69  |...Non-system di|
00000090  73 6b 0d 0a 50 72 65 73  73 20 61 6e 79 20 6b 65  |sk..Press any ke|
000000a0  79 20 74 6f 20 72 65 62  6f 6f 74 0d 0a 00 00 00  |y to reboot.....|
000000b0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/22155/mountinfo) leaked on lvs invocation. Parent PID 32686: bash
File descriptor 63 (pipe:[246642]) leaked on lvs invocation. Parent PID 32686: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 20181130_0645 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
GPT PMBR size mismatch (4294967294 != 7814037167) will be corrected by w(rite).
boot-info is executed in live-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
ls: cannot access '/home/usr/.config': No such file or directory
sdb may have broken partition table.

=================== os-prober:
/dev/sda2:Ubuntu 18.04.1 LTS (18.04):Ubuntu:linux

=================== blkid:
/dev/sda1: UUID="6136-6CA6" TYPE="vfat" PARTUUID="fa57f4a0-13be-4bfb-a54f-cde304a09bbf"
/dev/sda2: UUID="3274034a-ce9a-498c-b671-b89c1c3af48f" TYPE="ext4" PARTUUID="e4525daa-b310-4b3a-b18c-10385362cd57"
/dev/sdb: UUID="09701e79-57ae-4db0-b39d-6b88b83ba098" TYPE="ext4"
/dev/sdc1: UUID="74f85f81-b13c-4541-bb7e-df1e563a9033" TYPE="ext4" PARTLABEL="Filmoj" PARTUUID="399664f8-c124-49e4-924e-b6669fd45d21"
/dev/sdd1: LABEL="UBUNTU 18_0" UUID="16EF-3132" TYPE="vfat" PARTUUID="0b5b579a-01"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda3: UUID="277865d8-15f4-41ab-9d74-4fcdd8961294" TYPE="swap" PARTUUID="cc8f8639-b614-48a4-9d6b-3978d6a1beec"
/dev/sde1: LABEL="EFI" UUID="70D6-1701" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="fc446756-171a-42a1-9021-2e554d3ca71a"
/dev/sde2: UUID="9352becf-5d84-4fe0-835c-0266687ad409" TYPE="ext4" PARTLABEL="Berlin" PARTUUID="df8c9987-7b2f-4398-ad75-793384b1f3b1"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

GPT PMBR size mismatch (4294967294 != 7814037167) will be corrected by w(rite).
GPT PMBR size mismatch (4294967294 != 7814037167) will be corrected by w(rite).
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/fbx64.efi

=================== sda2/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 Nov 22 19:22 grub.d
total 80
-rwxr-xr-x 1 root root  9783 Jul 17 20:13 00_header
-rwxr-xr-x 1 root root  6258 Jul 16 17:15 05_debian_theme
-rwxr-xr-x 1 root root 12693 Jul 17 20:13 10_linux
-rwxr-xr-x 1 root root 11298 Jul 17 20:13 20_linux_xen
-rwxr-xr-x 1 root root  1992 Jan 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 Jul 17 20:13 30_os-prober
-rwxr-xr-x 1 root root  1418 Jul 17 20:13 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Jul 17 20:13 40_custom
-rwxr-xr-x 1 root root   216 Jul 17 20:13 41_custom
-rw-r--r-- 1 root root   483 Jul 17 20:13 README




=================== sda2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=6136-6CA6   (sda1)

=================== sda2recordfail=1/grub/grubenv :
recordfail=1



/usr/share/boot-sav/bs-cmd_terminal.sh: line 179: warning: command substitution: ignored null byte in input

=================== efibootmgr -v
BootCurrent: 0026
Timeout: 1 seconds
BootOrder: 0026,0024,0025,0001,0019,0021,0023
Boot0001* ubuntu	HD(1,GPT,fa57f4a0-13be-4bfb-a54f-cde304a09bbf,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0019  UEFI OS	HD(1,GPT,fa57f4a0-13be-4bfb-a54f-cde304a09bbf,0x800,0x100000)/File(EFIBOOTBOOTX64.EFI)
Boot0021  UEFI: LaCie d2 Quadra v3C 051E	PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(5,0)/HD(1,GPT,fc446756-171a-42a1-9021-2e554d3ca71a,0x28,0x64000)AMBO
Boot0023  ubuntu	HD(1,GPT,fa57f4a0-13be-4bfb-a54f-cde304a09bbf,0x800,0x100000)/File(EFIUbuntugrubx64.efi)
Boot0024* Hard Drive 	BBS(HD,,0x0)AMGOAMNO........o.C.r.u.c.i.a.l._.C.T.2.5.6.M.X.1.0.0.S.S.D.1....................A...........................>..Gd-.;.A..MQ..L. . . . . . . . .4.1.8.4.D.0.6.E.0.9.E.4......AMBOAMNO........o.S.T.2.0.0.0.D.M.0.0.1.-.1.E.R.1.6.4....................A...........................>..Gd-.;.A..MQ..L. . . . . . . . . . . . .4.W.1.Z.B.9.5.0......AMBOAMNO........o.T.O.S.H.I.B.A. .H.D.W.E.1.5.0....................A...........................>..Gd-.;.A..MQ..L. . . . . . . . .7.1.S.E.1.K.5.O.5.F.D.7......AMBOAMNO........q.S.a.n.D.i.s.k....................A.............................>..Gd-.;.A..MQ..L.4.C.5.3.0.0.0.1.1.2.1.1.0.6.1.2.3.0.9.2......AMBO
Boot0025* Removable Drive 	BBS(Floppy,,0x0)AMGOAMNO........q.L.a.C.i.e. .d.2. .Q.u.a.d.r.a. .v.3.C. .0.5.1.E....................A.............................>..Gd-.;.A..MQ..L.0.0.0.0.0.0.0.0.4.5.0.6.6.9.0.2.1.0.5.a......AMBO
Boot0026* UEFI: SanDisk	PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(1,0)/HD(1,MBR,0xb5b579a,0x800,0x7577800)AMBO

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	grubenv-ng	grub2,	signed grub-pc grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda2.
sdc1	: sdc,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sdc1.
sde1	: sde,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sde1.
sde2	: sde,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/ubuntu/9352becf-5d84-4fe0-835c-0266687ad409.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdc	: GPT,	no-BIOS_boot,	has-no-EFIpart, 	not-usb,	not-mmc, no-os,	2048 sectors * 512 bytes
sde	: GPT,	no-BIOS_boot,	has-correctEFI, 	usb-disk,	not-mmc, no-os,	40 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:256GB:scsi:512:4096:gpt:ATA Crucial_CT256MX1:;
1:1049kB:538MB:537MB:fat32::boot, esp;
2:538MB:239GB:238GB:ext4::;
3:239GB:256GB:17.1GB:linux-swap(v1)::;

BYT;
/dev/sdb:2000GB:scsi:512:4096:loop:ATA ST2000DM001-1ER1:;
1:0.00B:2000GB:2000GB:ext4::;

BYT;
/dev/sdc:5001GB:scsi:512:4096:gpt:ATA TOSHIBA HDWE150:;
1:1049kB:5001GB:5001GB:ext4:Filmoj:;

BYT;
/dev/sdd:63.1GB:scsi:512:512:msdos:SanDisk Cruzer Fit:;
1:1049kB:63.1GB:63.1GB:fat32::boot, lba;

BYT;
/dev/sde:4001GB:scsi:512:512:gpt:LaCie d2 Quadra v3C:;
1:20.5kB:210MB:210MB:fat32:EFI System Partition:boot, esp;
2:210MB:4001GB:4000GB:ext4:Berlin:;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
loop0 loop squashfs   1.8G
loop1 loop squashfs  86.9M
loop2 loop squashfs  34.7M
loop3 loop squashfs 140.9M
loop4 loop squashfs   2.3M
loop5 loop squashfs    13M
loop6 loop squashfs  14.5M
loop7 loop squashfs   3.7M
sda   disk          238.5G
sda1  part vfat       512M
sda2  part ext4     222.1G
sda3  part swap      15.9G
sdb   disk ext4       1.8T
sdc   disk            4.6T
sdc1  part ext4       4.6T
sdd   disk           58.8G
sdd1  part vfat      58.8G UBUNTU 18_0
sde   disk            3.7T
sde1  part vfat       200M EFI
sde2  part ext4       3.7T

KNAME ROTA RO RM STATE   MOUNTPOINT
loop0    1  1  0         /rofs
loop1    1  1  0         /snap/core/4917
loop2    1  1  0         /snap/gtk-common-themes/319
loop3    1  1  0         /snap/gnome-3-26-1604/70
loop4    1  1  0         /snap/gnome-calculator/180
loop5    1  1  0         /snap/gnome-characters/103
loop6    1  1  0         /snap/gnome-logs/37
loop7    1  1  0         /snap/gnome-system-monitor/51
sda      0  0  0 running
sda1     0  0  0         /mnt/boot-sav/sda1
sda2     0  0  0         /mnt/boot-sav/sda2
sda3     0  0  0         [SWAP]
sdb      1  0  0 running
sdc      1  0  0 running
sdc1     1  0  0         /mnt/boot-sav/sdc1
sdd      1  0  1 running
sdd1     1  0  1         /cdrom
sde      1  0  0 running
sde1     1  0  0         /mnt/boot-sav/sde1
sde2     1  0  0         /media/ubuntu/9352becf-5d84-4fe0-835c-0266687ad409


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=8134092k,nr_inodes=2033523,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=1631052k,mode=755)
/dev/sdd1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=2970)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=1631052k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_319.snap on /snap/gtk-common-themes/319 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_70.snap on /snap/gnome-3-26-1604/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_180.snap on /snap/gnome-calculator/180 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_103.snap on /snap/gnome-characters/103 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_51.snap on /snap/gnome-system-monitor/51 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sde2 on /media/ubuntu/9352becf-5d84-4fe0-835c-0266687ad409 type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw,relatime,data=ordered)
/dev/sdc1 on /mnt/boot-sav/sdc1 type ext4 (rw,relatime,data=ordered)
/dev/sde1 on /mnt/boot-sav/sde1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdd1 size slaves stat subsystem trace uevent
/sys/block/sde (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sde1 sde2 size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-13 i2c-14 i2c-15 i2c-16 i2c-17 i2c-18 i2c-19 i2c-2 i2c-20 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdc sdc1 sdd sdd1 sde sde1 sde2 sg0 sg1 sg2 sg3 sg4 shm snapshot snd stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 00 04 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 a6 6c 36 61 4e  4f 20 4e 41 4d 45 20 20  |..).l6aNO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sde1
00000000  eb 58 90 42 53 44 20 20  34 2e 34 00 02 01 20 00  |.X.BSD  4.4... .|
00000010  02 00 00 00 00 f0 00 00  20 00 10 00 00 00 00 00  |........ .......|
00000020  00 40 06 00 4f 0c 00 00  00 00 00 00 02 00 00 00  |.@..O...........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  00 01 29 01 17 d6 70 45  46 49 20 20 20 20 20 20  |..)...pEFI      |
00000050  20 20 46 41 54 33 32 20  20 20 fa 31 c0 8e d0 bc  |  FAT32   .1....|
00000060  00 7c fb 8e d8 e8 00 00  5e 83 c6 19 bb 07 00 fc  |.|......^.......|
00000070  ac 84 c0 74 06 b4 0e cd  10 eb f5 30 e4 cd 16 cd  |...t.......0....|
00000080  19 0d 0a 4e 6f 6e 2d 73  79 73 74 65 6d 20 64 69  |...Non-system di|
00000090  73 6b 0d 0a 50 72 65 73  73 20 61 6e 79 20 6b 65  |sk..Press any ke|
000000a0  79 20 74 6f 20 72 65 62  6f 6f 74 0d 0a 00 00 00  |y to reboot.....|
000000b0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200
GPT PMBR size mismatch (4294967294 != 7814037167) will be corrected by w(rite).

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  7.8G     0  7.8G   0% /dev
tmpfs          tmpfs     1.6G  1.7M  1.6G   1% /run
/dev/sdd1      vfat       59G  1.9G   57G   4% /cdrom
/dev/loop0     squashfs  1.8G  1.8G     0 100% /rofs
/cow           overlay   7.8G  1.1G  6.8G  14% /
tmpfs          tmpfs     7.8G   71M  7.8G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     7.8G     0  7.8G   0% /sys/fs/cgroup
tmpfs          tmpfs     7.8G   14M  7.8G   1% /tmp
tmpfs          tmpfs     1.6G   52K  1.6G   1% /run/user/999
/dev/loop1     squashfs   87M   87M     0 100% /snap/core/4917
/dev/loop2     squashfs   35M   35M     0 100% /snap/gtk-common-themes/319
/dev/loop3     squashfs  141M  141M     0 100% /snap/gnome-3-26-1604/70
/dev/loop4     squashfs  2.4M  2.4M     0 100% /snap/gnome-calculator/180
/dev/loop5     squashfs   13M   13M     0 100% /snap/gnome-characters/103
/dev/loop6     squashfs   15M   15M     0 100% /snap/gnome-logs/37
/dev/loop7     squashfs  3.8M  3.8M     0 100% /snap/gnome-system-monitor/51
/dev/sde2      ext4      3.6T  2.9T  555G  85% /media/ubuntu/9352becf-5d84-4fe0-835c-0266687ad409
/dev/sda1      vfat      511M  6.1M  505M   2% /mnt/boot-sav/sda1
/dev/sda2      ext4      218G   25G  182G  13% /mnt/boot-sav/sda2
/dev/sdc1      ext4      4.6T  3.9T  407G  91% /mnt/boot-sav/sdc1
/dev/sde1      vfat      197M   512  197M   1% /mnt/boot-sav/sde1

=================== fdisk -l:
Disk /dev/loop0: 1.8 GiB, 1864450048 bytes, 3641504 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 34.7 MiB, 36323328 bytes, 70944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 140.9 MiB, 147722240 bytes, 288520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 2.3 MiB, 2433024 bytes, 4752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 14.5 MiB, 15196160 bytes, 29680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 3.7 MiB, 3887104 bytes, 7592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 238.5 GiB, 256060514304 bytes, 500118192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 4CD137DD-5FBD-4033-A7FE-C7A50327729C

Device         Start       End   Sectors   Size Type
/dev/sda1       2048   1050623   1048576   512M EFI System
/dev/sda2    1050624 466780159 465729536 222.1G Linux filesystem
/dev/sda3  466780160 500117503  33337344  15.9G Linux swap


Disk /dev/sdb: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/sdc: 4.6 TiB, 5000981078016 bytes, 9767541168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 879B68E4-0CB7-41D9-9EBB-0A9A72FF2B3E

Device     Start        End    Sectors  Size Type
/dev/sdc1   2048 9767540735 9767538688  4.6T Linux filesystem


Disk /dev/sdd: 58.8 GiB, 63065554944 bytes, 123174912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0b5b579a

Device     Boot Start       End   Sectors  Size Id Type
/dev/sdd1  *     2048 123174911 123172864 58.8G  c W95 FAT32 (LBA)


Disk /dev/sde: 3.7 TiB, 4000787030016 bytes, 7814037168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 33553920 bytes
Disklabel type: gpt
Disk identifier: DB0CE26C-BFAA-4FBB-92C6-A6E9D43A7BBA

Device      Start        End    Sectors  Size Type
/dev/sde1      40     409639     409600  200M EFI System
/dev/sde2  409640 7813774983 7813365344  3.7T Linux filesystem




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file


=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sda1/efi/.../grub*.efi file!


=================== User settings
The settings chosen by the user will not act on the boot.

Il y a au moins une difficulté avec ta carte graphique : c'est connu la 1050 est très mal prise en charge par nouveau.

Réessaie de passer modprobe.blacklist=nouveau. Prends une photo de la page dans laquelle tu le mets STP.

axel584

Re : [Résolu] Problème au démarrage

J'ai finalement réussi à m'en sortir en réinstallant mon système et en cochant la case "installer les drivers propriétaires" (je ne me souviens pas du libellé exact).

Merci beaucoup pour votre aide,

Axel

DidierS

Re : [Résolu] Problème au démarrage

Si tu as résolu ton soucis passes ton sujet en résolu. Merci.

---

PC bureau  I7 intel 2.3Gz 8Go Ram Ubuntu 18.04.1 LTS
PC Bureau I3 intel 3.4Gz 4Go Ram 18.04.1 LTS
Portable Acer Intel Core I5 4Go Ram Ubuntu 18.04.1 LTS
Imprimante Epson BX-305-FW Plus